Error: command ['sh', '-c', 'dmesg | comm -13 /var/log/dmesg -'] failed with exit code 1: [   74.297680] [drm] DAC-6: set mode 640x480 0
[   74.404432] [drm] DAC-6: set mode 640x480 0
[   74.559789] i2c-adapter i2c-1: unable to read EDID block.
[   74.559795] i915 0000:00:02.0: LVDS-1: no EDID data
[   74.601335] [drm] TV-12: set mode NTSC 480i 0
[   74.742666] [drm] TV-12: set mode NTSC 480i 0
[   74.965135] [drm] DAC-6: set mode 640x480 0
[   75.114940] [drm] DAC-6: set mode 640x480 0
[   75.187743] i2c-adapter i2c-1: unable to read EDID block.
[   75.187749] i915 0000:00:02.0: LVDS-1: no EDID data
[   75.229273] [drm] TV-12: set mode NTSC 480i 0
[   75.397433] [drm] TV-12: set mode NTSC 480i 0
[   75.556269] [drm] DAC-6: set mode 640x480 0
[   75.662177] [drm] DAC-6: set mode 640x480 0
[   75.733474] i2c-adapter i2c-1: unable to read EDID block.
[   75.733480] i915 0000:00:02.0: LVDS-1: no EDID data
[   75.774960] [drm] TV-12: set mode NTSC 480i 0
[   75.916061] [drm] TV-12: set mode NTSC 480i 0
[   82.281519] ppdev: user-space parallel port driver
comm: file 2 is not in sorted order
[  172.726352] [drm] DAC-6: set mode 640x480 0
[  172.832599] [drm] DAC-6: set mode 640x480 0
[  172.921411] i2c-adapter i2c-1: unable to read EDID block.
[  172.921418] i915 0000:00:02.0: LVDS-1: no EDID data
[  172.963095] [drm] TV-12: set mode NTSC 480i 0
[  173.116645] [drm] TV-12: set mode NTSC 480i 0
[  173.274642] [drm] DAC-6: set mode 640x480 0
[  173.388889] [drm] DAC-6: set mode 640x480 0
[  173.458982] i2c-adapter i2c-1: unable to read EDID block.
[  173.458987] i915 0000:00:02.0: LVDS-1: no EDID data
[  173.500480] [drm] TV-12: set mode NTSC 480i 0
[  173.644735] [drm] TV-12: set mode NTSC 480i 0
[  173.798063] [drm] DAC-6: set mode 640x480 0
[  173.905326] [drm] DAC-6: set mode 640x480 0
[  173.978182] i2c-adapter i2c-1: unable to read EDID block.
[  173.978188] i915 0000:00:02.0: LVDS-1: no EDID data
[  174.019678] [drm] TV-12: set mode NTSC 480i 0
[  174.164690] [drm] TV-12: set mode NTSC 480i 0
[  210.035220] lib80211_crypt: registered algorithm 'WEP'
[  411.109208] usb 1-3: new high speed USB device using ehci_hcd and address 2
[  411.251443] usb 1-3: configuration #1 chosen from 1 choice
[  411.438550] Initializing USB Mass Storage driver...
[  411.438806] scsi2 : SCSI emulation for USB Mass Storage devices
[  411.439227] usbcore: registered new interface driver usb-storage
[  411.441269] USB Mass Storage support registered.
[  411.452864] usb-storage: device found at 2
[  411.452869] usb-storage: waiting for device to settle before scanning
[  416.452939] usb-storage: device scan complete
[  416.453938] scsi 2:0:0:0: Direct-Access     Ext Hard  Disk                 PQ: 0 ANSI: 4
[  416.455025] sd 2:0:0:0: Attached scsi generic sg1 type 0
[  416.486261] sd 2:0:0:0: [sdb] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[  416.487340] sd 2:0:0:0: [sdb] Write Protect is off
[  416.487344] sd 2:0:0:0: [sdb] Mode Sense: 10 00 00 00
[  416.487348] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  416.489600] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  416.489605]  sdb: sdb1 sdb2 sdb3
[  416.503733] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  416.503741] sd 2:0:0:0: [sdb] Attached SCSI disk
[  418.229323] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only.
[  830.523213] usb 1-3: USB disconnect, address 2
[  837.296058] usb 1-3: new high speed USB device using ehci_hcd and address 3
[  837.435458] usb 1-3: configuration #1 chosen from 1 choice
[  837.439300] scsi3 : SCSI emulation for USB Mass Storage devices
[  837.439727] usb-storage: device found at 3
[  837.439734] usb-storage: waiting for device to settle before scanning
[  842.436969] usb-storage: device scan complete
[  842.438088] scsi 3:0:0:0: Direct-Access     Ext Hard  Disk                 PQ: 0 ANSI: 4
[  842.439203] sd 3:0:0:0: Attached scsi generic sg1 type 0
[  842.469557] sd 3:0:0:0: [sdb] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[  842.470386] sd 3:0:0:0: [sdb] Write Protect is off
[  842.470390] sd 3:0:0:0: [sdb] Mode Sense: 10 00 00 00
[  842.470394] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[  842.472507] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[  842.472512]  sdb: sdb1 sdb2 sdb3
[  842.491897] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[  842.491906] sd 3:0:0:0: [sdb] Attached SCSI disk
[  845.621669] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only.
[  971.434393] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[  971.434411]  sdb: sdb1 sdb2 sdb3
[  972.067925] scsi 3:0:0:0: [sdb] Device not ready
[  972.067936] scsi 3:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  972.067948] scsi 3:0:0:0: [sdb] Sense Key : Not Ready [current] 
[  972.067961] scsi 3:0:0:0: [sdb] Add. Sense: Logical unit not ready, initializing command required
[  972.067980] end_request: I/O error, dev sdb, sector 128006046
[  972.067993] Buffer I/O error on device sdb3, logical block 0
[  972.068034] Buffer I/O error on device sdb3, logical block 1
[  972.068043] Buffer I/O error on device sdb3, logical block 2
[  972.068052] Buffer I/O error on device sdb3, logical block 3
[  972.068066] Buffer I/O error on device sdb3, logical block 4
[  972.068075] Buffer I/O error on device sdb3, logical block 5
[  972.068083] Buffer I/O error on device sdb3, logical block 6
[  972.068093] Buffer I/O error on device sdb3, logical block 7
[  972.068102] Buffer I/O error on device sdb3, logical block 8
[  972.068110] Buffer I/O error on device sdb3, logical block 9
[  972.068248] scsi 3:0:0:0: rejecting I/O to offline device
[  972.068268] scsi 3:0:0:0: [sdb] Unhandled error code
[  972.068275] scsi 3:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[  972.068286] end_request: I/O error, dev sdb, sector 128006286
[  979.360087] usb 1-3: USB disconnect, address 3
[ 1043.800126] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 1043.966333] usb 3-1: configuration #1 chosen from 1 choice
[ 1043.970466] scsi4 : SCSI emulation for USB Mass Storage devices
[ 1043.970906] usb-storage: device found at 2
[ 1043.970913] usb-storage: waiting for device to settle before scanning
[ 1048.969351] usb-storage: device scan complete
[ 1048.972337] scsi 4:0:0:0: Direct-Access     iRex     iLiad            1.00 PQ: 0 ANSI: 2
[ 1048.973493] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 1049.009265] sd 4:0:0:0: [sdb] 8010960 512-byte logical blocks: (4.10 GB/3.81 GiB)
[ 1049.016256] sd 4:0:0:0: [sdb] Write Protect is off
[ 1049.016260] sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 1049.016263] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1049.035279] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1049.035292]  sdb:
[ 1049.035426] ldm_validate_partition_table(): Disk read failed.
[ 1049.035519] Dev sdb: unable to read RDB block 0
[ 1049.035652]  unable to read partition table
[ 1049.054298] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1049.054311] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 1049.068283] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1049.082286] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1049.082297]  sdb:
[ 1052.889414] FAT: Filesystem error (dev sdb)
[ 1052.889426]     invalid access to FAT (entry 0x0d905800)
[ 1052.889437]     File system has been set read-only
[ 1118.152091] usb 3-1: USB disconnect, address 2
[ 2402.667292] [drm] DAC-6: set mode 640x480 0
[ 2402.775486] [drm] DAC-6: set mode 640x480 0
[ 2403.338257] i2c-adapter i2c-1: unable to read EDID block.
[ 2403.338270] i915 0000:00:02.0: LVDS-1: no EDID data
[ 2403.382401] [drm] TV-12: set mode NTSC 480i 0
[ 2403.524028] [drm] TV-12: set mode NTSC 480i 0
[ 4071.404072] usb 3-1: new full speed USB device using uhci_hcd and address 3
[ 4071.571330] usb 3-1: configuration #1 chosen from 1 choice
[ 4071.573462] scsi5 : SCSI emulation for USB Mass Storage devices
[ 4071.573893] usb-storage: device found at 3
[ 4071.573900] usb-storage: waiting for device to settle before scanning
[ 4076.573358] usb-storage: device scan complete
[ 4076.576358] scsi 5:0:0:0: Direct-Access     iRex     iLiad            1.00 PQ: 0 ANSI: 2
[ 4076.577507] sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 4076.607275] sd 5:0:0:0: [sdb] 8010960 512-byte logical blocks: (4.10 GB/3.81 GiB)
[ 4076.614268] sd 5:0:0:0: [sdb] Write Protect is off
[ 4076.614271] sd 5:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 4076.614275] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 4076.633294] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 4076.633305]  sdb:
[ 4076.633469] ldm_validate_partition_table(): Disk read failed.
[ 4076.633569] Dev sdb: unable to read RDB block 0
[ 4076.633720]  unable to read partition table
[ 4076.648296] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 4076.648308] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 4076.815311] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 4076.829307] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 4076.829319]  sdb:
[ 4078.763353] FAT: Filesystem error (dev sdb)
[ 4078.763359]     invalid access to FAT (entry 0x0d905800)
[ 4078.763364]     File system has been set read-only
[ 4110.272096] usb 3-1: USB disconnect, address 3
[ 4134.552051] usb 3-1: new full speed USB device using uhci_hcd and address 4
[ 4134.713375] usb 3-1: configuration #1 chosen from 1 choice
[ 4134.717259] scsi6 : SCSI emulation for USB Mass Storage devices
[ 4134.717708] usb-storage: device found at 4
[ 4134.717715] usb-storage: waiting for device to settle before scanning
[ 4139.717399] usb-storage: device scan complete
[ 4139.720398] scsi 6:0:0:0: Direct-Access     iRex     iLiad            1.00 PQ: 0 ANSI: 2
[ 4139.721542] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 4139.753317] sd 6:0:0:0: [sdb] 8010960 512-byte logical blocks: (4.10 GB/3.81 GiB)
[ 4139.760318] sd 6:0:0:0: [sdb] Write Protect is off
[ 4139.760325] sd 6:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 4139.760330] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 4139.779323] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 4139.779332]  sdb:
[ 4139.779435] ldm_validate_partition_table(): Disk read failed.
[ 4139.779496] Dev sdb: unable to read RDB block 0
[ 4139.779588]  unable to read partition table
[ 4139.796356] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 4139.796370] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 4139.810335] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 4139.824335] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 4139.824346]  sdb:
[ 4141.585583] FAT: Filesystem error (dev sdb)
[ 4141.585588]     invalid access to FAT (entry 0x0d905800)
[ 4141.585593]     File system has been set read-only