BusyBox v1.10.2 (Ubuntu 1:1.10.2-2ubuntu7) built-in shell (ash) Enter 'help' for a list of built-in commands. ~ # dmesg Linux version 2.6.28-11-ixp4xx (buildd@kahikatea) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #41-Ubuntu Wed Apr 8 05:56:18 UTC 2009 (Ubuntu 2.6.28-11.41-ixp4xx) CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE), cr=0000397f CPU: VIVT data cache, VIVT instruction cache Machine: Linksys NSLU2 Memory policy: ECC disabled, Data cache writeback On node 0 totalpages: 8192 free_area_init_node: node 0, pgdat c025ec20, node_mem_map c0274000 DMA zone: 64 pages used for memmap DMA zone: 0 pages reserved DMA zone: 8128 pages, LIFO batch:0 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 Kernel command line: console=ttyS0,115200 rtc-x1205.probe=0,0x6f noirqdebug Unknown boot option `rtc-x1205.probe=0,0x6f': ignoring IRQ lockup detection disabled PID hash table entries: 128 (order: 7, 512 bytes) Console: colour dummy device 80x30 Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Memory: 32MB = 32MB total Memory: 24464KB available (2184K code, 178K data, 108K init) SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Calibrating delay loop... 132.71 BogoMIPS (lpj=663552) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok net_namespace: 704 bytes NET: Registered protocol family 16 IXP4xx: Using 16MiB expansion bus window size NSLU2: Using MAC address 00:14:bf:6a:c8:ac for port 0 PCI: IXP4xx is host PCI: IXP4xx Using direct access for memory space pci 0000:00:01.0: reg 10 32bit mmio: [0x000000-0x000fff] pci 0000:00:01.0: supports D1 D2 pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot pci 0000:00:01.0: PME# disabled pci 0000:00:01.1: reg 10 32bit mmio: [0x000000-0x000fff] pci 0000:00:01.1: supports D1 D2 pci 0000:00:01.1: PME# supported from D0 D1 D2 D3hot pci 0000:00:01.1: PME# disabled pci 0000:00:01.2: reg 10 32bit mmio: [0x000000-0x0000ff] pci 0000:00:01.2: supports D1 D2 pci 0000:00:01.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:01.2: PME# disabled PCI: bus0: Fast back to back transfers disabled pci 0000:00:01.0: dmabounce: registered device pci 0000:00:01.1: dmabounce: registered device pci 0000:00:01.2: dmabounce: registered device SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 2 Switched to high resolution mode on CPU 0 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 5503K IXP4xx Queue Manager initialized. audit: initializing netlink socket (disabled) type=2000 audit(10.990:1): initialized fuse init (API version 7.10) msgmni has been set to 58 io scheduler noop registered io scheduler cfq registered (default) Serial: 8250/16550 driver2 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale console [ttyS0] enabled serial8250.0: ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale brd: module loaded eth0: MII PHY 1 on NPE-B Driver 'sd' needs updating - please use bus_type methods IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bank IXP4XX-Flash.0: Found an alias at 0x800000 for the chip at 0x0 Intel/Sharp Extended Query Table at 0x0031 Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled erase region 0: offset=0x0,size=0x20000,blocks=64 Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0x7e0000 6 RedBoot partitions found on MTD device IXP4XX-Flash.0 Creating 6 MTD partitions on "IXP4XX-Flash.0": 0x00000000-0x00040000 : "RedBoot" 0x00040000-0x00060000 : "SysConf" 0x00060000-0x00080000 : "Loader" 0x00080000-0x00280000 : "Kernel" 0x00280000-0x007e0000 : "Ramdisk" 0x007e0000-0x00800000 : "FIS directory" ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver PCI: enabling device 0000:00:01.2 (0140 -> 0142) ehci_hcd 0000:00:01.2: EHCI Host Controller ehci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:01.2: irq 26, io mem 0x48002000 ehci_hcd 0000:00:01.2: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.28-11-ixp4xx ehci_hcd usb usb1: SerialNumber: 0000:00:01.2 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver PCI: enabling device 0000:00:01.0 (0140 -> 0142) ohci_hcd 0000:00:01.0: OHCI Host Controller ohci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:01.0: irq 28, io mem 0x48000000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.28-11-ixp4xx ohci_hcd usb usb2: SerialNumber: 0000:00:01.0 PCI: enabling device 0000:00:01.1 (0140 -> 0142) ohci_hcd 0000:00:01.1: OHCI Host Controller ohci_hcd 0000:00:01.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:01.1: irq 27, io mem 0x48001000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.28-11-ixp4xx ohci_hcd usb usb3: SerialNumber: 0000:00:01.1 Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice input: ixp4xx beeper as /devices/platform/ixp4xx-beeper.4/input/input0 IXP4xx Watchdog Timer: heartbeat 60 sec TCP cubic registered NET: Registered protocol family 17 XScale DSP coprocessor detected. Freeing init memory: 108K usb 1-1: new high speed USB device using ehci_hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice scsi0 : SCSI emulation for USB Mass Storage devices usb 1-1: New USB device found, idVendor=0781, idProduct=5406 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1: Product: U3 Cruzer Micro usb 1-1: Manufacturer: SanDisk usb 1-1: SerialNumber: 07744114120392E3 usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning scsi 0:0:0:0: Direct-Access SanDisk Cruzer 8.01 PQ: 0 ANSI: 0 CCS sd 0:0:0:0: [sda] 7843839 512-byte hardware sectors: (4.01 GB/3.73 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 45 00 00 08 sd 0:0:0:0: [sda] Assuming drive cache: write through sd 0:0:0:0: [sda] 7843839 512-byte hardware sectors: (4.01 GB/3.73 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 45 00 00 08 sd 0:0:0:0: [sda] Assuming drive cache: write through sda: sda1 sd 0:0:0:0: [sda] Attached SCSI removable disk sd 0:0:0:0: Attached scsi generic sg0 type 0 usb-storage: device scan complete net eth0: firmware: requesting NPE-B NPE-B: firmware functionality 0x2, revision 0x2:1 eth0: link down eth0: link down eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 warning: process `rdate' used the deprecated sysctl system call with 1.40. path_id invoked oom-killer: gfp_mask=0xd0, order=2, oomkilladj=-17 Function entered at [] from [] Function entered at [] from [] Function entered at [] from [] Function entered at [] from [] Function entered at [] from [] Function entered at [] from [] r7:c07ba000 r6:00000000 r5:00000000 r4:c06a1a80 Function entered at [] from [] r5:c05f0d80 r4:c06a1a80 Function entered at [] from [] r7:c07a8000 r6:c07ba000 r5:c07ba190 r4:00000000 Function entered at [] from [] Function entered at [] from [] Function entered at [] from [] Mem-info: DMA per-cpu: CPU 0: hi: 0, btch: 1 usd: 0 Active_anon:616 active_file:0 inactive_anon:570 inactive_file:2 unevictable:4119 dirty:0 writeback:0 unstable:0 free:225 slab:651 mapped:802 pagetables:211 bounce:0 DMA free:900kB min:720kB low:900kB high:1080kB active_anon:2464kB inactive_anon:2280kB active_file:0kB inactive_file:8kB unevictable:16476kB present:32512kB pages_scanned:0 all_unreclaimable? no lowmem_reserve[]: 0 0 0 DMA: 45*4kB 2*8kB 2*16kB 1*32kB 0*64kB 1*128kB 0*256kB 1*512kB 0*1024kB 0*2048kB 0*4096kB = 900kB 4140 total pagecache pages 0 pages in swap cache Swap cache stats: add 0, delete 0, find 0/0 Free swap = 0kB Total swap = 0kB 8192 pages of RAM 516 free pages 683 reserved pages 556 slab pages 8177 pages shared 0 pages swap cached Out of memory: kill process 2080 (sshd) score 81 or a child Killed process 2103 (sshd)