┌─────────────┤ [!!] Activate FCP devices for installation ├──────────────┐ │ │ │ The following FCP devices are available for installation. Select │ │ each FCP device you want to activate for accessing FC-attached SCSI │ │ devices. Depending on your FCP device configuration, you will be │ │ asked further setup questions. │ │ │ │ Select "Finish" when you have all FCP devices activated for your │ │ installation. │ │ │ │ Available FCP devices: │ │ │ │ 0.0.e000 (configured) ↑ │ │ 0.0.e001 ▮ │ │ 0.0.e002 ▒ │ │ 0.0.e003 ▒ │ │ 0.0.e004 ↓ │ │ │ │ │ │ │ └─────────────────────────────────────────────────────────────────────────┘ ┌─────────────┤ [!!] Activate FCP devices for installation ├──────────────┐ │ │ │ The following FCP devices are available for installation. Select │ │ each FCP device you want to activate for accessing FC-attached SCSI │ │ devices. Depending on your FCP device configuration, you will be │ │ asked further setup questions. │ │ │ │ Select "Finish" when you have all FCP devices activated for your │ │ installation. │ │ │ │ Available FCP devices: │ │ │ │ 0.0.e100 (configured) ↑ │ │ 0.0.e101 ▒ │ │ 0.0.e102 ▮ │ │ 0.0.e103 ▒ │ │ 0.0.e104 ↓ │ │ │ │ │ │ │ └─────────────────────────────────────────────────────────────────────────┘ ┌─────────────┤ [!!] Activate FCP devices for installation ├──────────────┐ │ │ │ The following FCP devices are available for installation. Select │ │ each FCP device you want to activate for accessing FC-attached SCSI │ │ devices. Depending on your FCP device configuration, you will be │ │ asked further setup questions. │ │ │ │ Select "Finish" when you have all FCP devices activated for your │ │ installation. │ │ │ │ Available FCP devices: │ │ │ │ 0.0.e10c ↑ │ │ 0.0.e10d ▒ │ │ 0.0.e10e ▒ │ │ 0.0.e10f ▮ │ │ Finish ↓ │ │ │ │ │ │ │ └─────────────────────────────────────────────────────────────────────────┘ ┌────────────────────────┤ [!!] Partition disks ├─────────────────────────┐ │ │ │ The installer can guide you through partitioning a disk (using │ │ different standard schemes) or, if you prefer, you can do it │ │ manually. With guided partitioning you will still have a chance later │ │ to review and customise the results. │ │ │ │ If you choose guided partitioning for an entire disk, you will next │ │ be asked which disk should be used. │ │ │ │ Partitioning method: │ │ │ │ Guided - resize LVM VG mpatha1, LV mpatha1 and use freed space │ │ Guided - use entire disk │ │ Guided - use entire disk and set up LVM │ │ Guided - use entire disk and set up encrypted LVM │ │ Manual │ │ │ │ │ │ │ └─────────────────────────────────────────────────────────────────────────┘ select Manual ┌────────────────────────┤ [!!] Partition disks ├─────────────────────────┐ │ │ │ This is an overview of your currently configured partitions and mount │ │ points. Select a partition to modify its settings (file system, mount │ │ point, etc.), a free space to create partitions, or a device to │ │ initialize its partition table. │ │ │ │ Configure software RAID ↑ │ │ Configure the Logical Volume Manager ▮ │ │ Configure encrypted volumes ▒ │ │ Configure iSCSI volumes ▒ │ │ ▒ │ │ Multipath mpatha (WWID 36005076306ffd6b60000000000002603) - 68.7 ▒ │ │ > #1 primary 67.7 GB ext4 ▒ │ │ > #5 logical 1.0 GB F swap swap ▒ │ │ ▒ │ │ Undo changes to partitions ↓ │ │ │ │ │ │ │ └─────────────────────────────────────────────────────────────────────────┘ select #1 ┌────────────────────────┤ [!!] Partition disks ├─────────────────────────┐ │ │ │ You are editing partition #1 of Multipath mpatha (WWID │ │ 36005076306ffd6b60000000000002603). This partition is formatted with │ │ the Ext4 journaling file system. │ │ │ │ Partition settings: │ │ │ │ Use as: do not use │ │ │ │ Bootable flag: off │ │ │ │ Resize the partition (currently 67.7 GB) │ │ Erase data on this partition │ │ Delete the partition │ │ Done setting up the partition │ │ │ │ │ │ │ └─────────────────────────────────────────────────────────────────────────┘ and change to: ┌────────────────────────┤ [!!] Partition disks ├─────────────────────────┐ │ │ │ You are editing partition #1 of Multipath mpatha (WWID │ │ 36005076306ffd6b60000000000002603). This partition is formatted with │ │ the Ext4 journaling file system. │ │ │ │ Partition settings: │ │ │ │ Use as: Ext4 journaling file system ↑ │ │ ▮ │ │ Format the partition: no, keep existing data ▒ │ │ Mount point: / ▒ │ │ Mount options: defaults ▒ │ │ Bootable flag: off ▒ │ │ ▒ │ │ Resize the partition (currently 67.7 GB) ▒ │ │ Erase data on this partition ↓ │ │ │ │ │ │ │ └─────────────────────────────────────────────────────────────────────────┘ ┌────────────────────────┤ [!!] Partition disks ├─────────────────────────┐ │ │ │ You are editing partition #1 of Multipath mpatha (WWID │ │ 36005076306ffd6b60000000000002603). This partition is formatted with │ │ the Ext4 journaling file system. │ │ │ │ Partition settings: │ │ │ │ Format the partition: no, keep existing data ↑ │ │ Mount point: / ▒ │ │ Mount options: defaults ▒ │ │ Bootable flag: off ▒ │ │ ▒ │ │ Resize the partition (currently 67.7 GB) ▒ │ │ Erase data on this partition ▒ │ │ Delete the partition ▮ │ │ Done setting up the partition ↓ │ │ │ │ │ │ │ └─────────────────────────────────────────────────────────────────────────┘ select Done ┌────────────────────────┤ [!!] Partition disks ├─────────────────────────┐ │ │ │ This is an overview of your currently configured partitions and mount │ │ points. Select a partition to modify its settings (file system, mount │ │ point, etc.), a free space to create partitions, or a device to │ │ initialize its partition table. │ │ │ │ Configure the Logical Volume Manager ↑ │ │ Configure encrypted volumes ▒ │ │ Configure iSCSI volumes ▒ │ │ ▒ │ │ Multipath mpatha (WWID 36005076306ffd6b60000000000002603) - 68.7 ▒ │ │ > #1 primary 67.7 GB K ext4 / ▒ │ │ > #5 logical 1.0 GB F swap swap ▒ │ │ ▒ │ │ Undo changes to partitions ▮ │ │ Finish partitioning and write changes to disk ↓ │ │ │ │ │ │ │ └─────────────────────────────────────────────────────────────────────────┘ select Finish ┌───────────────────────┤ [!] Partition disks ├───────────────────────┐ │ │ │ The file system on /dev/mapper/mpatha1 assigned to / has not been │ │ marked for formatting. Directories containing system files (/etc, │ │ /lib, /usr, /var, ...) that already exist under any defined │ │ mountpoint will be deleted during the install. │ │ │ │ Please ensure that you have backed up any critical data before │ │ installing. │ │ │ │ Do you want to return to the partitioner? │ │ │ │ │ │ │ └─────────────────────────────────────────────────────────────────────┘ select No ┌───────────────────────┤ [!!] Partition disks ├───────────────────────┐ │ │ │ If you continue, the changes listed below will be written to the │ │ disks. Otherwise, you will be able to make further changes manually. │ │ │ │ The following partitions are going to be formatted: │ │ partition #5 of Multipath mpatha (WWID │ │ 36005076306ffd6b60000000000002603) as swap │ │ │ │ Write the changes to disks? │ │ │ │ │ │ │ └──────────────────────────────────────────────────────────────────────┘ select Yes ... and proceed with the installation until the end and reboot and login: $ sudo find / -iname "test?.txt" /test1.txt /home/ubuntu/test2.txt