[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-32-generic (buildd@batsu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 (Ubuntu 3.2.0-32.51-generic 3.2.30) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-32-generic root=UUID=6eb89f46-9a58-4d8a-9cf1-8a5fb1fa162d ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable) [ 0.000000] BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fd43000 (usable) [ 0.000000] BIOS-e820: 000000007fd43000 - 000000007fd4f000 (reserved) [ 0.000000] BIOS-e820: 000000007fd4f000 - 000000007fe3a000 (usable) [ 0.000000] BIOS-e820: 000000007fe3a000 - 000000007fee8000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fee8000 - 000000007feec000 (usable) [ 0.000000] BIOS-e820: 000000007feec000 - 000000007fef1000 (ACPI data) [ 0.000000] BIOS-e820: 000000007fef1000 - 000000007fef2000 (usable) [ 0.000000] BIOS-e820: 000000007fef2000 - 000000007feff000 (ACPI data) [ 0.000000] BIOS-e820: 000000007feff000 - 000000007ff00000 (usable) [ 0.000000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: /DG35EC, BIOS ECG3510M.86A.0107.2008.0826.1637 08/26/2008 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x7ff00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2047MB, range: 1MB, type UC [ 0.000000] total RAM covered: 2047M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 2 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2047MB, range: 1MB, type UC [ 0.000000] found SMP MP-table at [ffff8800000fe200] fe200 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000008a000] 8a000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-000000007ff00000 [ 0.000000] 0000000000 - 007fe00000 page 2M [ 0.000000] 007fe00000 - 007ff00000 page 4k [ 0.000000] kernel direct mapping tables up to 7ff00000 @ 1fffc000-20000000 [ 0.000000] RAMDISK: 364d6000 - 37263000 [ 0.000000] ACPI: RSDP 00000000000fe020 00014 (v00 INTEL ) [ 0.000000] ACPI: RSDT 000000007fefd038 0004C (v01 INTEL ECG3510M 0000006B 01000013) [ 0.000000] ACPI: FACP 000000007fefc000 00074 (v01 INTEL ECG3510M 0000006B MSFT 01000013) [ 0.000000] ACPI: DSDT 000000007fef6000 05BEB (v01 INTEL ECG3510M 0000006B MSFT 01000013) [ 0.000000] ACPI: FACS 000000007fe96000 00040 [ 0.000000] ACPI: APIC 000000007fef5000 00078 (v01 INTEL ECG3510M 0000006B MSFT 01000013) [ 0.000000] ACPI: WDDT 000000007fef4000 00040 (v01 INTEL ECG3510M 0000006B MSFT 01000013) [ 0.000000] ACPI: MCFG 000000007fef3000 0003C (v01 INTEL ECG3510M 0000006B MSFT 01000013) [ 0.000000] ACPI: ASF! 000000007fef2000 000A6 (v32 INTEL ECG3510M 0000006B MSFT 01000013) [ 0.000000] ACPI: SSDT 000000007fef0000 0020C (v01 INTEL CpuPm 0000006B MSFT 01000013) [ 0.000000] ACPI: SSDT 000000007feef000 001F9 (v01 INTEL Cpu0Ist 0000006B MSFT 01000013) [ 0.000000] ACPI: SSDT 000000007feee000 001F9 (v01 INTEL Cpu1Ist 0000006B MSFT 01000013) [ 0.000000] ACPI: SSDT 000000007feed000 001F9 (v01 INTEL Cpu2Ist 0000006B MSFT 01000013) [ 0.000000] ACPI: SSDT 000000007feec000 001F9 (v01 INTEL Cpu3Ist 0000006B MSFT 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007ff00000 [ 0.000000] Initmem setup node 0 0000000000000000-000000007ff00000 [ 0.000000] NODE_DATA [000000007fe35000 - 000000007fe39fff] [ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d400000-ffff88007f3fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000008f [ 0.000000] 0: 0x00000100 -> 0x0007fd43 [ 0.000000] 0: 0x0007fd4f -> 0x0007fe3a [ 0.000000] 0: 0x0007fee8 -> 0x0007feec [ 0.000000] 0: 0x0007fef1 -> 0x0007fef2 [ 0.000000] 0: 0x0007feff -> 0x0007ff00 [ 0.000000] On node 0 totalpages: 523699 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3898 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8124 pages used for memmap [ 0.000000] DMA32 zone: 511608 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000008f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000007fd43000 - 000000007fd4f000 [ 0.000000] PM: Registered nosave memory: 000000007fe3a000 - 000000007fee8000 [ 0.000000] PM: Registered nosave memory: 000000007feec000 - 000000007fef1000 [ 0.000000] PM: Registered nosave memory: 000000007fef2000 - 000000007feff000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ff00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fa00000 s83136 r8192 d23360 u524288 [ 0.000000] pcpu-alloc: s83136 r8192 d23360 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515506 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-32-generic root=UUID=6eb89f46-9a58-4d8a-9cf1-8a5fb1fa162d ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 2031876k/2096128k available (6560k kernel code, 1332k absent, 62920k reserved, 6639k data, 924k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2487.460 MHz processor. [ 0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4974.92 BogoMIPS (lpj=9949840) [ 0.008009] pid_max: default: 32768 minimum: 301 [ 0.008033] Security Framework initialized [ 0.008052] AppArmor: AppArmor initialized [ 0.008054] Yama: becoming mindful. [ 0.008265] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.012922] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.013482] Mount-cache hash table entries: 256 [ 0.013630] Initializing cgroup subsys cpuacct [ 0.013635] Initializing cgroup subsys memory [ 0.013644] Initializing cgroup subsys devices [ 0.013646] Initializing cgroup subsys freezer [ 0.013648] Initializing cgroup subsys blkio [ 0.013656] Initializing cgroup subsys perf_event [ 0.013688] CPU: Physical Processor ID: 0 [ 0.013690] CPU: Processor Core ID: 0 [ 0.013692] mce: CPU supports 6 MCE banks [ 0.013701] CPU0: Thermal monitoring enabled (TM2) [ 0.013705] using mwait in idle threads. [ 0.016195] ACPI: Core revision 20110623 [ 0.019976] ftrace: allocating 27014 entries in 106 pages [ 0.024378] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.066689] CPU0: Intel Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 06 [ 0.068003] APIC calibration not consistent with PM-Timer: 101ms instead of 100ms [ 0.068003] APIC delta adjusted to PM-Timer: 1243750 (1261096) [ 0.068003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.068003] ... version: 2 [ 0.068003] ... bit width: 40 [ 0.068003] ... generic registers: 2 [ 0.068003] ... value mask: 000000ffffffffff [ 0.068003] ... max period: 000000007fffffff [ 0.068003] ... fixed-purpose events: 3 [ 0.068003] ... event mask: 0000000700000003 [ 0.068003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.068003] Booting Node 0, Processors #1 [ 0.068003] smpboot cpu 1: start_ip = 8a000 [ 0.156037] NMI watchdog enabled, takes one hw-pmu counter. [ 0.156078] Brought up 2 CPUs [ 0.156080] Total of 2 processors activated (9949.98 BogoMIPS). [ 0.157417] devtmpfs: initialized [ 0.157417] EVM: security.selinux [ 0.157417] EVM: security.SMACK64 [ 0.157417] EVM: security.capability [ 0.157417] PM: Registering ACPI NVS region at 7fe3a000 (712704 bytes) [ 0.157417] print_constraints: dummy: [ 0.157417] RTC time: 7:05:58, date: 10/28/12 [ 0.157417] NET: Registered protocol family 16 [ 0.157417] Trying to unpack rootfs image as initramfs... [ 0.157417] ACPI: bus type pci registered [ 0.157417] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.157417] PCI: not using MMCONFIG [ 0.157417] PCI: Using configuration type 1 for base access [ 0.160759] bio: create slab at 0 [ 0.160836] ACPI: Added _OSI(Module Device) [ 0.160838] ACPI: Added _OSI(Processor Device) [ 0.160840] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.160842] ACPI: Added _OSI(Processor Aggregator Device) [ 0.161653] ACPI: EC: Look up EC in DSDT [ 0.163539] ACPI: Interpreter enabled [ 0.163543] ACPI: (supports S0 S1 S3 S4 S5) [ 0.163560] ACPI: Using IOAPIC for interrupt routing [ 0.163574] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.163675] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in ACPI motherboard resources [ 0.191480] ACPI: No dock devices found. [ 0.191484] HEST: Table not found. [ 0.191487] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.191985] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.192971] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.192974] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.192976] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.192978] pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000effff] [ 0.192980] pci_root PNP0A03:00: host bridge window [mem 0xf8000000-0xfeafffff] [ 0.192983] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xefffffff] [ 0.192996] pci 0000:00:00.0: [8086:2980] type 0 class 0x000600 [ 0.193041] pci 0000:00:01.0: [8086:2981] type 1 class 0x000604 [ 0.193080] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.193083] pci 0000:00:01.0: PME# disabled [ 0.193120] pci 0000:00:19.0: [8086:104b] type 0 class 0x000200 [ 0.193138] pci 0000:00:19.0: reg 10: [mem 0x99000000-0x9901ffff] [ 0.193147] pci 0000:00:19.0: reg 14: [mem 0x99020000-0x99020fff] [ 0.193155] pci 0000:00:19.0: reg 18: [io 0x40c0-0x40df] [ 0.193209] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.193212] pci 0000:00:19.0: PME# disabled [ 0.193226] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03 [ 0.193263] pci 0000:00:1a.0: reg 20: [io 0x40a0-0x40bf] [ 0.193295] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03 [ 0.193333] pci 0000:00:1a.1: reg 20: [io 0x4080-0x409f] [ 0.193372] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03 [ 0.193390] pci 0000:00:1a.7: reg 10: [mem 0x99021400-0x990217ff] [ 0.193470] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.193474] pci 0000:00:1a.7: PME# disabled [ 0.193492] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604 [ 0.193557] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.193561] pci 0000:00:1c.0: PME# disabled [ 0.193581] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604 [ 0.193646] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.193649] pci 0000:00:1c.1: PME# disabled [ 0.193671] pci 0000:00:1c.2: [8086:2843] type 1 class 0x000604 [ 0.193737] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.193741] pci 0000:00:1c.2: PME# disabled [ 0.193763] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03 [ 0.193800] pci 0000:00:1d.0: reg 20: [io 0x4060-0x407f] [ 0.193830] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03 [ 0.193867] pci 0000:00:1d.1: reg 20: [io 0x4040-0x405f] [ 0.193897] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03 [ 0.193935] pci 0000:00:1d.2: reg 20: [io 0x4020-0x403f] [ 0.193977] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03 [ 0.193995] pci 0000:00:1d.7: reg 10: [mem 0x99021000-0x990213ff] [ 0.194072] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.194076] pci 0000:00:1d.7: PME# disabled [ 0.194093] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.194152] pci 0000:00:1f.0: [8086:2810] type 0 class 0x000601 [ 0.194231] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f) [ 0.194276] pci 0000:00:1f.2: [8086:2820] type 0 class 0x000101 [ 0.194288] pci 0000:00:1f.2: reg 10: [io 0x4438-0x443f] [ 0.194296] pci 0000:00:1f.2: reg 14: [io 0x444c-0x444f] [ 0.194304] pci 0000:00:1f.2: reg 18: [io 0x4430-0x4437] [ 0.194311] pci 0000:00:1f.2: reg 1c: [io 0x4448-0x444b] [ 0.194319] pci 0000:00:1f.2: reg 20: [io 0x4410-0x441f] [ 0.194327] pci 0000:00:1f.2: reg 24: [io 0x4400-0x440f] [ 0.194354] pci 0000:00:1f.2: PME# supported from D3hot [ 0.194357] pci 0000:00:1f.2: PME# disabled [ 0.194368] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05 [ 0.194379] pci 0000:00:1f.3: reg 10: [mem 0x99021800-0x990218ff] [ 0.194405] pci 0000:00:1f.3: reg 20: [io 0x4000-0x401f] [ 0.194437] pci 0000:00:1f.5: [8086:2825] type 0 class 0x000101 [ 0.194449] pci 0000:00:1f.5: reg 10: [io 0x4428-0x442f] [ 0.194457] pci 0000:00:1f.5: reg 14: [io 0x4444-0x4447] [ 0.194465] pci 0000:00:1f.5: reg 18: [io 0x4420-0x4427] [ 0.194473] pci 0000:00:1f.5: reg 1c: [io 0x4440-0x4443] [ 0.194481] pci 0000:00:1f.5: reg 20: [io 0x40f0-0x40ff] [ 0.194489] pci 0000:00:1f.5: reg 24: [io 0x40e0-0x40ef] [ 0.194516] pci 0000:00:1f.5: PME# supported from D3hot [ 0.194520] pci 0000:00:1f.5: PME# disabled [ 0.194561] pci 0000:01:00.0: [10de:0611] type 0 class 0x000300 [ 0.194571] pci 0000:01:00.0: reg 10: [mem 0x98000000-0x98ffffff] [ 0.194581] pci 0000:01:00.0: reg 14: [mem 0x80000000-0x8fffffff 64bit pref] [ 0.194592] pci 0000:01:00.0: reg 1c: [mem 0x96000000-0x97ffffff 64bit] [ 0.194599] pci 0000:01:00.0: reg 24: [io 0x3000-0x307f] [ 0.194606] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref] [ 0.194658] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.194660] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.194663] pci 0000:00:01.0: bridge window [mem 0x96000000-0x98ffffff] [ 0.194667] pci 0000:00:01.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref] [ 0.194706] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.194749] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.194810] pci 0000:04:00.0: [197b:2368] type 0 class 0x000101 [ 0.194839] pci 0000:04:00.0: reg 10: [io 0x2018-0x201f] [ 0.194853] pci 0000:04:00.0: reg 14: [io 0x2024-0x2027] [ 0.194866] pci 0000:04:00.0: reg 18: [io 0x2010-0x2017] [ 0.194880] pci 0000:04:00.0: reg 1c: [io 0x2020-0x2023] [ 0.194894] pci 0000:04:00.0: reg 20: [io 0x2000-0x200f] [ 0.194919] pci 0000:04:00.0: reg 30: [mem 0xffff0000-0xffffffff pref] [ 0.195003] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.195012] pci 0000:00:1c.2: PCI bridge to [bus 04-04] [ 0.195016] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.195058] pci 0000:05:03.0: [1102:0005] type 0 class 0x000401 [ 0.195076] pci 0000:05:03.0: reg 10: [io 0x1000-0x101f] [ 0.195090] pci 0000:05:03.0: reg 14: [mem 0x94000000-0x941fffff 64bit] [ 0.195104] pci 0000:05:03.0: reg 1c: [mem 0x90000000-0x93ffffff 64bit] [ 0.195154] pci 0000:05:03.0: supports D1 D2 [ 0.195173] pci 0000:05:05.0: [11c1:5811] type 0 class 0x000c00 [ 0.195189] pci 0000:05:05.0: reg 10: [mem 0x94200000-0x94200fff] [ 0.195261] pci 0000:05:05.0: supports D1 D2 [ 0.195263] pci 0000:05:05.0: PME# supported from D0 D1 D2 D3hot [ 0.195267] pci 0000:05:05.0: PME# disabled [ 0.195303] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode) [ 0.195307] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff] [ 0.195311] pci 0000:00:1e.0: bridge window [mem 0x90000000-0x942fffff] [ 0.195316] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.195319] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.195321] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.195323] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000effff] (subtractive decode) [ 0.195326] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfeafffff] (subtractive decode) [ 0.195328] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xefffffff] (subtractive decode) [ 0.195349] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.195482] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 0.195534] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.195565] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 0.195596] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 0.195665] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.195668] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.195669] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.199364] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.199415] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12) [ 0.199463] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 0.199510] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12) [ 0.199558] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12) [ 0.199605] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12) [ 0.199652] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.199699] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11 12) [ 0.199831] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.199835] vgaarb: loaded [ 0.199836] vgaarb: bridge control possible 0000:01:00.0 [ 0.199949] i2c-core: driver [aat2870] using legacy suspend method [ 0.199951] i2c-core: driver [aat2870] using legacy resume method [ 0.200030] SCSI subsystem initialized [ 0.204118] libata version 3.00 loaded. [ 0.204118] usbcore: registered new interface driver usbfs [ 0.204118] usbcore: registered new interface driver hub [ 0.204123] usbcore: registered new device driver usb [ 0.204221] PCI: Using ACPI for IRQ routing [ 0.207009] PCI: pci_cache_line_size set to 64 bytes [ 0.207091] reserve RAM buffer: 000000000008f000 - 000000000008ffff [ 0.207093] reserve RAM buffer: 000000007fd43000 - 000000007fffffff [ 0.207096] reserve RAM buffer: 000000007fe3a000 - 000000007fffffff [ 0.207098] reserve RAM buffer: 000000007feec000 - 000000007fffffff [ 0.207101] reserve RAM buffer: 000000007fef2000 - 000000007fffffff [ 0.207103] reserve RAM buffer: 000000007ff00000 - 000000007fffffff [ 0.207215] NetLabel: Initializing [ 0.207217] NetLabel: domain hash size = 128 [ 0.207218] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.207232] NetLabel: unlabeled traffic allowed by default [ 0.214858] AppArmor: AppArmor Filesystem Enabled [ 0.214892] pnp: PnP ACPI init [ 0.214913] ACPI: bus type pnp registered [ 0.215458] pnp 00:00: [bus 00-ff] [ 0.215461] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.215463] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.215465] pnp 00:00: [io 0x0d00-0xffff window] [ 0.215467] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.215469] pnp 00:00: [mem 0x000e0000-0x000effff window] [ 0.215472] pnp 00:00: [mem 0xf8000000-0xfeafffff window] [ 0.215474] pnp 00:00: [mem 0x80000000-0xefffffff window] [ 0.215544] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.215554] pnp 00:01: [mem 0xf0000000-0xf7ffffff] [ 0.215556] pnp 00:01: [mem 0xfed13000-0xfed13fff] [ 0.215557] pnp 00:01: [mem 0xfed14000-0xfed17fff] [ 0.215559] pnp 00:01: [mem 0xfed18000-0xfed18fff] [ 0.215561] pnp 00:01: [mem 0xfed19000-0xfed19fff] [ 0.215563] pnp 00:01: [mem 0xfed1c000-0xfed1ffff] [ 0.215564] pnp 00:01: [mem 0xfed20000-0xfed3ffff] [ 0.215566] pnp 00:01: [mem 0xfed45000-0xfed99fff] [ 0.215568] pnp 00:01: [mem 0x000c0000-0x000dffff] [ 0.215569] pnp 00:01: [mem 0x000e0000-0x000fffff] [ 0.215625] system 00:01: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.215628] system 00:01: [mem 0xfed13000-0xfed13fff] has been reserved [ 0.215630] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.215633] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.215635] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.215637] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.215640] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.215642] system 00:01: [mem 0xfed45000-0xfed99fff] has been reserved [ 0.215644] system 00:01: [mem 0x000c0000-0x000dffff] could not be reserved [ 0.215647] system 00:01: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.215650] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.215749] pnp 00:02: [io 0x0000-0x000f] [ 0.215751] pnp 00:02: [io 0x0081-0x0083] [ 0.215753] pnp 00:02: [io 0x0087] [ 0.215755] pnp 00:02: [io 0x0089-0x008b] [ 0.215756] pnp 00:02: [io 0x008f] [ 0.215758] pnp 00:02: [io 0x00c0-0x00df] [ 0.215760] pnp 00:02: [dma 4] [ 0.215787] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.215796] pnp 00:03: [io 0x0070-0x0071] [ 0.215797] pnp 00:03: [io 0x0074-0x0077] [ 0.215810] pnp 00:03: [irq 8] [ 0.215837] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.215846] pnp 00:04: [io 0x00f0] [ 0.215851] pnp 00:04: [irq 13] [ 0.215876] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.215885] pnp 00:05: [io 0x0061] [ 0.215914] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.215923] pnp 00:06: [io 0x0500-0x053f] [ 0.215925] pnp 00:06: [io 0x0400-0x047f] [ 0.215926] pnp 00:06: [io 0x0092] [ 0.215928] pnp 00:06: [io 0x0360-0x0361] [ 0.215930] pnp 00:06: [io 0x0680-0x06ff] [ 0.215931] pnp 00:06: [io 0x0010-0x001f] [ 0.215933] pnp 00:06: [io 0x0072-0x0073] [ 0.215938] pnp 00:06: [io 0x0080] [ 0.215939] pnp 00:06: [io 0x0084-0x0086] [ 0.215941] pnp 00:06: [io 0x0088] [ 0.215942] pnp 00:06: [io 0x008c-0x008e] [ 0.215944] pnp 00:06: [io 0x0090-0x009f] [ 0.215996] system 00:06: [io 0x0500-0x053f] has been reserved [ 0.215998] system 00:06: [io 0x0400-0x047f] has been reserved [ 0.216000] system 00:06: [io 0x0360-0x0361] has been reserved [ 0.216003] system 00:06: [io 0x0680-0x06ff] has been reserved [ 0.216029] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.216067] pnp 00:07: [io 0x0060] [ 0.216069] pnp 00:07: [io 0x0064] [ 0.216109] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.216277] pnp 00:08: [io 0x03f8-0x03ff] [ 0.216283] pnp 00:08: [irq 4] [ 0.216359] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.216395] pnp 00:09: [mem 0xfec00000-0xfec000ff] [ 0.216428] pnp 00:09: Plug and Play ACPI device, IDs PNP0003 (active) [ 0.216473] pnp: PnP ACPI: found 10 devices [ 0.216475] ACPI: ACPI bus type pnp unregistered [ 0.222692] Switching to clocksource acpi_pm [ 0.222798] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] [ 0.222801] pci 0000:04:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref] [ 0.222806] PCI: max bus depth: 1 pci_try_num: 2 [ 0.222854] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf8000000-0xf80fffff pref] [ 0.222858] pci 0000:00:1c.2: BAR 14: assigned [mem 0xf8100000-0xf82fffff] [ 0.222861] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf8300000-0xf85fffff pref] [ 0.222864] pci 0000:00:1c.1: BAR 14: assigned [mem 0xf8600000-0xf87fffff] [ 0.222867] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf8800000-0xf89fffff 64bit pref] [ 0.222871] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff] [ 0.222874] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf8a00000-0xf8bfffff] [ 0.222877] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8c00000-0xf8dfffff 64bit pref] [ 0.222880] pci 0000:00:1c.0: BAR 13: assigned [io 0x6000-0x6fff] [ 0.222884] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000) [ 0.222886] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.222889] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.222892] pci 0000:00:01.0: bridge window [mem 0x96000000-0x98ffffff] [ 0.222895] pci 0000:00:01.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref] [ 0.222899] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.222902] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff] [ 0.222906] pci 0000:00:1c.0: bridge window [mem 0xf8a00000-0xf8bfffff] [ 0.222910] pci 0000:00:1c.0: bridge window [mem 0xf8c00000-0xf8dfffff 64bit pref] [ 0.222916] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.222918] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff] [ 0.222923] pci 0000:00:1c.1: bridge window [mem 0xf8600000-0xf87fffff] [ 0.222927] pci 0000:00:1c.1: bridge window [mem 0xf8800000-0xf89fffff 64bit pref] [ 0.222933] pci 0000:04:00.0: BAR 6: assigned [mem 0xf8300000-0xf830ffff pref] [ 0.222936] pci 0000:00:1c.2: PCI bridge to [bus 04-04] [ 0.222938] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.222943] pci 0000:00:1c.2: bridge window [mem 0xf8100000-0xf82fffff] [ 0.222946] pci 0000:00:1c.2: bridge window [mem 0xf8300000-0xf85fffff pref] [ 0.222952] pci 0000:00:1e.0: PCI bridge to [bus 05-05] [ 0.222954] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff] [ 0.222959] pci 0000:00:1e.0: bridge window [mem 0x90000000-0x942fffff] [ 0.222984] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.222988] pci 0000:00:01.0: setting latency timer to 64 [ 0.222998] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.223002] pci 0000:00:1c.0: setting latency timer to 64 [ 0.223008] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.223011] pci 0000:00:1c.1: setting latency timer to 64 [ 0.223019] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.223023] pci 0000:00:1c.2: setting latency timer to 64 [ 0.223029] pci 0000:00:1e.0: setting latency timer to 64 [ 0.223033] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.223035] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.223037] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.223039] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000effff] [ 0.223042] pci_bus 0000:00: resource 8 [mem 0xf8000000-0xfeafffff] [ 0.223044] pci_bus 0000:00: resource 9 [mem 0x80000000-0xefffffff] [ 0.223046] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.223049] pci_bus 0000:01: resource 1 [mem 0x96000000-0x98ffffff] [ 0.223052] pci_bus 0000:01: resource 2 [mem 0x80000000-0x8fffffff 64bit pref] [ 0.223055] pci_bus 0000:02: resource 0 [io 0x6000-0x6fff] [ 0.223058] pci_bus 0000:02: resource 1 [mem 0xf8a00000-0xf8bfffff] [ 0.223061] pci_bus 0000:02: resource 2 [mem 0xf8c00000-0xf8dfffff 64bit pref] [ 0.223064] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff] [ 0.223067] pci_bus 0000:03: resource 1 [mem 0xf8600000-0xf87fffff] [ 0.223070] pci_bus 0000:03: resource 2 [mem 0xf8800000-0xf89fffff 64bit pref] [ 0.223073] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] [ 0.223075] pci_bus 0000:04: resource 1 [mem 0xf8100000-0xf82fffff] [ 0.223078] pci_bus 0000:04: resource 2 [mem 0xf8300000-0xf85fffff pref] [ 0.223081] pci_bus 0000:05: resource 0 [io 0x1000-0x1fff] [ 0.223084] pci_bus 0000:05: resource 1 [mem 0x90000000-0x942fffff] [ 0.223087] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.223089] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.223092] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.223095] pci_bus 0000:05: resource 7 [mem 0x000e0000-0x000effff] [ 0.223098] pci_bus 0000:05: resource 8 [mem 0xf8000000-0xfeafffff] [ 0.223100] pci_bus 0000:05: resource 9 [mem 0x80000000-0xefffffff] [ 0.223145] NET: Registered protocol family 2 [ 0.223256] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.223883] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.223883] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.223883] TCP: Hash tables configured (established 262144 bind 65536) [ 0.223883] TCP reno registered [ 0.223883] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.223905] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.224067] NET: Registered protocol family 1 [ 0.224101] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.224118] pci 0000:00:1a.0: PCI INT A disabled [ 0.224139] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.224155] pci 0000:00:1a.1: PCI INT B disabled [ 0.224165] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.224295] pci 0000:00:1a.7: PCI INT C disabled [ 0.224311] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.224326] pci 0000:00:1d.0: PCI INT A disabled [ 0.224339] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.224354] pci 0000:00:1d.1: PCI INT B disabled [ 0.224362] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.224376] pci 0000:00:1d.2: PCI INT C disabled [ 0.224384] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.224499] pci 0000:00:1d.7: PCI INT A disabled [ 0.224522] pci 0000:01:00.0: Boot video device [ 0.224532] PCI: CLS 64 bytes, default 64 [ 0.224924] audit: initializing netlink socket (disabled) [ 0.224934] type=2000 audit(1351407958.220:1): initialized [ 0.245350] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.247316] VFS: Disk quotas dquot_6.5.2 [ 0.247373] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.247874] fuse init (API version 7.17) [ 0.247953] msgmni has been set to 3968 [ 0.248284] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.248316] io scheduler noop registered [ 0.248317] io scheduler deadline registered [ 0.248349] io scheduler cfq registered (default) [ 0.248457] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.248490] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.248540] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.248574] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.248625] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.248658] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X [ 0.248712] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.248745] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X [ 0.248820] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.248842] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.248896] intel_idle: MWAIT substates: 0x22220 [ 0.248898] intel_idle: does not run on family 6 model 23 [ 0.248973] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 0.248980] ACPI: Sleep Button [SLPB] [ 0.249032] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.249035] ACPI: Power Button [PWRF] [ 0.249999] ERST: Table is not found! [ 0.250001] GHES: HEST is not enabled! [ 0.250080] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.270444] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.404573] Freeing initrd memory: 13876k freed [ 0.484510] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.500258] Linux agpgart interface v0.103 [ 0.501851] brd: module loaded [ 0.502639] loop: module loaded [ 0.502803] ata_piix 0000:00:1f.2: version 2.13 [ 0.502819] ata_piix 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.502824] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.656057] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.656376] scsi0 : ata_piix [ 0.656469] scsi1 : ata_piix [ 0.656884] ata1: SATA max UDMA/133 cmd 0x4438 ctl 0x444c bmdma 0x4410 irq 19 [ 0.656889] ata2: SATA max UDMA/133 cmd 0x4430 ctl 0x4448 bmdma 0x4418 irq 19 [ 0.656909] ata_piix 0000:00:1f.5: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.656913] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.656954] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.657164] scsi2 : ata_piix [ 0.657241] scsi3 : ata_piix [ 0.657597] ata3: SATA max UDMA/133 cmd 0x4428 ctl 0x4444 bmdma 0x40f0 irq 19 [ 0.657600] ata4: SATA max UDMA/133 cmd 0x4420 ctl 0x4440 bmdma 0x40f8 irq 19 [ 0.657663] pata_acpi 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.657689] pata_acpi 0000:04:00.0: setting latency timer to 64 [ 0.657702] pata_acpi 0000:04:00.0: PCI INT A disabled [ 0.657982] Fixed MDIO Bus: probed [ 0.658001] tun: Universal TUN/TAP device driver, 1.6 [ 0.658003] tun: (C) 1999-2004 Max Krasnyansky [ 0.658062] PPP generic driver version 2.4.2 [ 0.658174] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.658188] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.658206] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.658209] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.658255] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.658282] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.662174] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 0.662188] ehci_hcd 0000:00:1a.7: irq 18, io mem 0x99021400 [ 0.676030] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.676198] hub 1-0:1.0: USB hub found [ 0.676202] hub 1-0:1.0: 4 ports detected [ 0.676266] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.676277] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.676280] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.676322] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.676346] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.680243] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 0.680257] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x99021000 [ 0.696027] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.696177] hub 2-0:1.0: USB hub found [ 0.696180] hub 2-0:1.0: 6 ports detected [ 0.696247] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.696259] uhci_hcd: USB Universal Host Controller Interface driver [ 0.696274] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.696280] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.696283] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.696332] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.696361] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000040a0 [ 0.696482] hub 3-0:1.0: USB hub found [ 0.696488] hub 3-0:1.0: 2 ports detected [ 0.696544] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.696549] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.696552] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.696596] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.696624] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00004080 [ 0.696743] hub 4-0:1.0: USB hub found [ 0.696747] hub 4-0:1.0: 2 ports detected [ 0.696806] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.696812] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.696815] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.696859] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 0.696880] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004060 [ 0.697001] hub 5-0:1.0: USB hub found [ 0.697004] hub 5-0:1.0: 2 ports detected [ 0.697059] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.697065] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.697068] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.697119] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 0.697140] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004040 [ 0.697255] hub 6-0:1.0: USB hub found [ 0.697259] hub 6-0:1.0: 2 ports detected [ 0.697313] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.697319] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.697322] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.697368] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 0.697389] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004020 [ 0.697506] hub 7-0:1.0: USB hub found [ 0.697510] hub 7-0:1.0: 2 ports detected [ 0.697611] usbcore: registered new interface driver libusual [ 0.697646] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.700321] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.700327] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.700456] mousedev: PS/2 mouse device common for all mice [ 0.700592] rtc_cmos 00:03: RTC can wake from S4 [ 0.700690] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.700711] rtc0: alarms up to one month, 114 bytes nvram [ 0.700792] device-mapper: uevent: version 1.0.3 [ 0.700853] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.700861] cpuidle: using governor ladder [ 0.700863] cpuidle: using governor menu [ 0.700864] EFI Variables Facility v0.08 2004-May-17 [ 0.701080] TCP cubic registered [ 0.701178] NET: Registered protocol family 10 [ 0.701611] NET: Registered protocol family 17 [ 0.701615] Registering the dns_resolver key type [ 0.701739] PM: Hibernation image not present or could not be loaded. [ 0.701750] registered taskstats version 1 [ 0.707565] Magic number: 0:383:67 [ 0.707678] rtc_cmos 00:03: setting system clock to 2012-10-28 07:05:59 UTC (1351407959) [ 0.707887] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.707889] EDD information not available. [ 0.986660] ata3: SATA link down (SStatus 0 SControl 300) [ 1.132060] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.141426] ata4.00: ATA-6: WDC WD2500JD-50GBB0, 02.05D02, max UDMA/100 [ 1.141431] ata4.00: 488397168 sectors, multi 16: LBA48 [ 1.141437] ata4.00: applying bridge limits [ 1.157421] ata4.00: configured for UDMA/100 [ 1.244026] Refined TSC clocksource calibration: 2487.499 MHz. [ 1.244033] Switching to clocksource tsc [ 1.248024] usb 5-1: new low-speed USB device number 2 using uhci_hcd [ 1.452066] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.452080] ata1.01: SATA link down (SStatus 4 SControl 300) [ 1.452194] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.452204] ata2.01: SATA link down (SStatus 4 SControl 300) [ 1.461477] ata2.00: ATA-6: WDC WD360GD-50GHA2, 38.06N38, max UDMA/133 [ 1.461483] ata2.00: 72303840 sectors, multi 16: LBA48 [ 1.461488] ata2.00: applying bridge limits [ 1.461573] ata1.00: ATA-6: WDC WD2500JD-50GBB0, 02.05D02, max UDMA/100 [ 1.461575] ata1.00: 488397168 sectors, multi 16: LBA48 [ 1.461578] ata1.00: applying bridge limits [ 1.477477] ata1.00: configured for UDMA/100 [ 1.477534] ata2.00: configured for UDMA/100 [ 1.477614] scsi 0:0:0:0: Direct-Access ATA WDC WD2500JD-50G 02.0 PQ: 0 ANSI: 5 [ 1.477722] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.477753] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.477770] sd 0:0:0:0: [sda] Write Protect is off [ 1.477773] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.477793] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.477887] scsi 1:0:0:0: Direct-Access ATA WDC WD360GD-50GH 38.0 PQ: 0 ANSI: 5 [ 1.477999] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.478115] sd 1:0:0:0: [sdb] 72303840 512-byte logical blocks: (37.0 GB/34.4 GiB) [ 1.478119] scsi 3:0:0:0: Direct-Access ATA WDC WD2500JD-50G 02.0 PQ: 0 ANSI: 5 [ 1.478160] sd 1:0:0:0: [sdb] Write Protect is off [ 1.478162] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.478182] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.478242] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 1.478245] sd 3:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.478292] sd 3:0:0:0: [sdc] Write Protect is off [ 1.478295] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.478316] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.494573] sda: sda1 [ 1.494801] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.496506] sdc: sdc1 [ 1.496718] sd 3:0:0:0: [sdc] Attached SCSI disk [ 1.501376] sdb: sdb1 sdb2 [ 1.501636] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.503094] Freeing unused kernel memory: 924k freed [ 1.503365] Write protecting the kernel read-only data: 12288k [ 1.508345] Freeing unused kernel memory: 1612k freed [ 1.512552] Freeing unused kernel memory: 1200k freed [ 1.526889] udevd[91]: starting version 175 [ 1.575976] pata_jmicron 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.576622] pata_jmicron 0000:04:00.0: setting latency timer to 64 [ 1.578272] scsi4 : pata_jmicron [ 1.578635] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k [ 1.578637] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 1.578673] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.578683] e1000e 0000:00:19.0: setting latency timer to 64 [ 1.578790] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [ 1.579201] scsi5 : pata_jmicron [ 1.579578] ata5: PATA max UDMA/100 cmd 0x2018 ctl 0x2024 bmdma 0x2000 irq 18 [ 1.579582] ata6: PATA max UDMA/100 cmd 0x2010 ctl 0x2020 bmdma 0x2008 irq 18 [ 1.675283] input: Chicony USB Gaming Keyboard Pro as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input2 [ 1.675425] generic-usb 0003:06A3:8000.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony USB Gaming Keyboard Pro] on usb-0000:00:1d.0-1/input0 [ 1.748493] ata5.00: ATAPI: SONY DVD-ROM DDU1615, FYS2, max UDMA/33 [ 1.748498] ata5.01: ATAPI: PLEXTOR DVDR PX-740A, 1.01, max UDMA/33 [ 1.756510] ata5.00: configured for UDMA/33 [ 1.772771] ata5.01: configured for UDMA/33 [ 1.774768] scsi 4:0:0:0: CD-ROM SONY DVD-ROM DDU1615 FYS2 PQ: 0 ANSI: 5 [ 1.775794] sr0: scsi3-mmc drive: 4x/40x cd/rw xa/form2 cdda tray [ 1.775798] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.775925] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.776093] sr 4:0:0:0: Attached scsi generic sg3 type 5 [ 1.778604] scsi 4:0:1:0: CD-ROM PLEXTOR DVDR PX-740A 1.01 PQ: 0 ANSI: 5 [ 1.782466] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 1.782608] sr 4:0:1:0: Attached scsi CD-ROM sr1 [ 1.782750] sr 4:0:1:0: Attached scsi generic sg4 type 5 [ 1.784032] usb 7-1: new low-speed USB device number 2 using uhci_hcd [ 1.787024] input: Chicony USB Gaming Keyboard Pro as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input3 [ 1.787167] generic-usb 0003:06A3:8000.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Chicony USB Gaming Keyboard Pro] on usb-0000:00:1d.0-1/input1 [ 1.791468] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 1.844031] input: Chicony USB Gaming Keyboard Pro as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.2/input/input4 [ 1.844111] generic-usb 0003:06A3:8000.0003: input,hidraw2: USB HID v1.11 Gamepad [Chicony USB Gaming Keyboard Pro] on usb-0000:00:1d.0-1/input2 [ 1.844132] usbcore: registered new interface driver usbhid [ 1.844134] usbhid: USB HID core driver [ 1.878214] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:c0:af:81:6f [ 1.878217] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 1.878240] e1000e 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: FFFFFF-0FF [ 1.937437] firewire_ohci 0000:05:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.979706] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/input/input5 [ 1.979807] generic-usb 0003:046D:C01E.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1/input0 [ 1.992084] firewire_ohci: Added fw-ohci device 0000:05:05.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0 [ 2.492145] firewire_core: created device fw0: GUID 0090270002493f1a, S400 [ 14.920828] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.279684] udevd[329]: starting version 175 [ 15.356533] lp: driver loaded but no devices found [ 15.357870] Adding 1970172k swap on /dev/sdb2. Priority:-1 extents:1 across:1970172k [ 15.420519] type=1400 audit(1351407974.210:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=465 comm="apparmor_parser" [ 15.420888] type=1400 audit(1351407974.210:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=465 comm="apparmor_parser" [ 15.421100] type=1400 audit(1351407974.210:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=465 comm="apparmor_parser" [ 15.554042] snd_ctxfi 0000:05:03.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 15.937036] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro [ 16.045062] nvidia: module license 'NVIDIA' taints kernel. [ 16.045066] Disabling lock debugging due to kernel taint [ 16.258153] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 16.258164] nvidia 0000:01:00.0: setting latency timer to 64 [ 16.258170] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 16.258329] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.43 Sun Aug 19 20:14:03 PDT 2012 [ 16.280217] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 16.369528] vesafb: mode is 1680x1050x32, linelength=6720, pages=0 [ 16.369531] vesafb: scrolling: redraw [ 16.369533] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 16.372496] vesafb: framebuffer at 0x97000000, mapped to 0xffffc90009100000, using 6912k, total 6912k [ 16.372684] Console: switching to colour frame buffer device 210x65 [ 16.372714] fb0: VESA VGA frame buffer device [ 16.435986] init: failsafe main process (760) killed by TERM signal [ 16.521426] type=1400 audit(1351407975.310:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=817 comm="apparmor_parser" [ 16.523340] type=1400 audit(1351407975.310:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=816 comm="apparmor_parser" [ 16.524277] type=1400 audit(1351407975.314:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=817 comm="apparmor_parser" [ 16.524491] type=1400 audit(1351407975.314:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=817 comm="apparmor_parser" [ 16.539558] type=1400 audit(1351407975.326:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=825 comm="apparmor_parser" [ 16.540048] type=1400 audit(1351407975.330:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=825 comm="apparmor_parser" [ 16.548037] type=1400 audit(1351407975.338:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=826 comm="apparmor_parser" [ 16.555759] ppdev: user-space parallel port driver [ 16.573646] Bluetooth: Core ver 2.16 [ 16.573667] NET: Registered protocol family 31 [ 16.573669] Bluetooth: HCI device and connection manager initialized [ 16.573672] Bluetooth: HCI socket layer initialized [ 16.573673] Bluetooth: L2CAP socket layer initialized [ 16.573678] Bluetooth: SCO socket layer initialized [ 16.588183] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.588187] Bluetooth: BNEP filters: protocol multicast [ 16.613836] Bluetooth: RFCOMM TTY layer initialized [ 16.613842] Bluetooth: RFCOMM socket layer initialized [ 16.613844] Bluetooth: RFCOMM ver 1.11 [ 17.004205] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [ 17.060068] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [ 17.060397] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.060766] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.263563] NVRM: GPU at 0000:01:00: GPU-2cbf29b2-dbc7-b1ae-e43a-3c25be0f4595 [ 19.263569] NVRM: Your system is not currently configured to drive a VGA console [ 19.263572] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver [ 19.263574] NVRM: requires the use of a text-mode VGA console. Use of other console [ 19.263576] NVRM: drivers including, but not limited to, vesafb, may result in [ 19.263578] NVRM: corruption and stability problems, and is not supported. [ 19.673545] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 19.673803] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 30.336015] eth0: no IPv6 routers present [25073.707738] UDP: short packet: From 85.189.242.224:10855 25649/714 to 192.168.1.66:6881 [145051.204040] usb 1-1: new high-speed USB device number 2 using ehci_hcd [145051.336698] hub 1-1:1.0: USB hub found [145051.336759] hub 1-1:1.0: 2 ports detected [145051.608146] usb 1-1.2: new high-speed USB device number 3 using ehci_hcd [145051.877126] Initializing USB Mass Storage driver... [145051.877785] scsi6 : usb-storage 1-1.2:1.0 [145051.877896] usbcore: registered new interface driver usb-storage [145051.877899] USB Mass Storage support registered. [145051.898274] usbcore: registered new interface driver uas [145051.918752] cdc_acm 1-1.2:1.1: This device cannot do calls on its own. It is not a modem. [145051.918863] cdc_acm 1-1.2:1.1: ttyACM0: USB ACM device [145051.919264] usbcore: registered new interface driver cdc_acm [145051.919268] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [145052.876671] scsi 6:0:0:0: Direct-Access Android UMS Composite 00 PQ: 0 ANSI: 2 [145052.877032] scsi 6:0:0:1: Direct-Access Android UMS Composite 00 PQ: 0 ANSI: 2 [145052.878056] sd 6:0:0:0: Attached scsi generic sg5 type 0 [145052.878641] sd 6:0:0:1: Attached scsi generic sg6 type 0 [145052.885774] sd 6:0:0:0: [sdd] Attached SCSI removable disk [145052.886710] sd 6:0:0:1: [sde] Attached SCSI removable disk [145561.255488] usb 1-1: USB disconnect, device number 2 [145561.255494] usb 1-1.2: USB disconnect, device number 3 [145562.004039] usb 1-1: new high-speed USB device number 4 using ehci_hcd [145562.136768] hub 1-1:1.0: USB hub found [145562.136828] hub 1-1:1.0: 2 ports detected [145562.408100] usb 1-1.2: new high-speed USB device number 5 using ehci_hcd [145562.502429] scsi7 : usb-storage 1-1.2:1.0 [145562.502874] cdc_acm 1-1.2:1.1: This device cannot do calls on its own. It is not a modem. [145562.502976] cdc_acm 1-1.2:1.1: ttyACM0: USB ACM device [145563.500862] scsi 7:0:0:0: Direct-Access Android UMS Composite 00 PQ: 0 ANSI: 2 [145563.501225] scsi 7:0:0:1: Direct-Access Android UMS Composite 00 PQ: 0 ANSI: 2 [145563.502170] sd 7:0:0:0: Attached scsi generic sg5 type 0 [145563.502658] sd 7:0:0:1: Attached scsi generic sg6 type 0 [145563.506727] sd 7:0:0:0: [sdd] Attached SCSI removable disk [145563.510173] sd 7:0:0:1: [sde] Attached SCSI removable disk [145568.852491] usb 1-1: USB disconnect, device number 4 [145568.852497] usb 1-1.2: USB disconnect, device number 5 [145570.088043] usb 1-1: new high-speed USB device number 6 using ehci_hcd [145570.223453] hub 1-1:1.0: USB hub found [145570.223594] hub 1-1:1.0: 2 ports detected [145570.496097] usb 1-1.2: new high-speed USB device number 7 using ehci_hcd [145570.589695] scsi8 : usb-storage 1-1.2:1.0 [145570.590125] cdc_acm 1-1.2:1.1: This device cannot do calls on its own. It is not a modem. [145570.590223] cdc_acm 1-1.2:1.1: ttyACM0: USB ACM device [145571.589162] scsi 8:0:0:0: Direct-Access Android UMS Composite 00 PQ: 0 ANSI: 2 [145571.589607] scsi 8:0:0:1: Direct-Access Android UMS Composite 00 PQ: 0 ANSI: 2 [145571.590554] sd 8:0:0:0: Attached scsi generic sg5 type 0 [145571.591048] sd 8:0:0:1: Attached scsi generic sg6 type 0 [145571.598483] sd 8:0:0:0: [sdd] Attached SCSI removable disk [145571.599100] sd 8:0:0:1: [sde] Attached SCSI removable disk [145575.988243] usb 1-1: USB disconnect, device number 6 [145575.988249] usb 1-1.2: USB disconnect, device number 7 [145577.820042] usb 1-1: new high-speed USB device number 8 using ehci_hcd [145577.952649] hub 1-1:1.0: USB hub found [145577.952709] hub 1-1:1.0: 2 ports detected [145578.224092] usb 1-1.2: new high-speed USB device number 9 using ehci_hcd [145578.317678] scsi9 : usb-storage 1-1.2:1.0 [145578.318004] cdc_acm 1-1.2:1.1: This device cannot do calls on its own. It is not a modem. [145578.318101] cdc_acm 1-1.2:1.1: ttyACM0: USB ACM device [145579.316869] scsi 9:0:0:0: Direct-Access Android UMS Composite 00 PQ: 0 ANSI: 2 [145579.317356] scsi 9:0:0:1: Direct-Access Android UMS Composite 00 PQ: 0 ANSI: 2 [145579.318384] sd 9:0:0:0: Attached scsi generic sg5 type 0 [145579.319598] sd 9:0:0:1: Attached scsi generic sg6 type 0 [145579.325107] sd 9:0:0:0: [sdd] Attached SCSI removable disk [145579.325759] sd 9:0:0:1: [sde] Attached SCSI removable disk [145796.951830] usb 1-1: USB disconnect, device number 8 [145796.951836] usb 1-1.2: USB disconnect, device number 9 [145802.580035] usb 1-1: new high-speed USB device number 10 using ehci_hcd [145802.712762] hub 1-1:1.0: USB hub found [145802.712818] hub 1-1:1.0: 2 ports detected [145802.984206] usb 1-1.2: new high-speed USB device number 11 using ehci_hcd [145803.080125] scsi10 : usb-storage 1-1.2:1.0 [145803.080499] cdc_acm 1-1.2:1.1: This device cannot do calls on its own. It is not a modem. [145803.080609] cdc_acm 1-1.2:1.1: ttyACM0: USB ACM device [145804.080974] scsi 10:0:0:0: Direct-Access Android UMS Composite 00 PQ: 0 ANSI: 2 [145804.081384] scsi 10:0:0:1: Direct-Access Android UMS Composite 00 PQ: 0 ANSI: 2 [145804.082377] sd 10:0:0:0: Attached scsi generic sg5 type 0 [145804.086335] sd 10:0:0:0: [sdd] Attached SCSI removable disk [145804.088341] sd 10:0:0:1: Attached scsi generic sg6 type 0 [145804.090437] sd 10:0:0:1: [sde] Attached SCSI removable disk [146132.843228] usb 1-1: USB disconnect, device number 10 [146132.843234] usb 1-1.2: USB disconnect, device number 11 [146134.036047] usb 1-1: new high-speed USB device number 12 using ehci_hcd [146134.092330] hub 1-0:1.0: unable to enumerate USB device on port 1 [484311.288034] usb 1-1: new high-speed USB device number 13 using ehci_hcd [484311.420740] hub 1-1:1.0: USB hub found [484311.420800] hub 1-1:1.0: 3 ports detected [484311.692193] usb 1-1.3: new high-speed USB device number 14 using ehci_hcd [484311.790452] scsi11 : usb-storage 1-1.3:1.0 [484312.789087] scsi 11:0:0:0: Direct-Access SAMSUNG File-Stor Gadget 0001 PQ: 0 ANSI: 2 [484312.789572] scsi 11:0:0:1: Direct-Access SAMSUNG File-Stor Gadget 0001 PQ: 0 ANSI: 2 [484312.790518] sd 11:0:0:0: Attached scsi generic sg5 type 0 [484312.791014] sd 11:0:0:1: Attached scsi generic sg6 type 0 [484312.795699] sd 11:0:0:0: [sdd] Attached SCSI removable disk [484312.799066] sd 11:0:0:1: [sde] Attached SCSI removable disk [484321.943560] usb 1-1.3: USB disconnect, device number 14 [484322.244190] usb 1-1.3: new high-speed USB device number 15 using ehci_hcd [484322.338654] scsi12 : usb-storage 1-1.3:1.0 [484323.337089] scsi 12:0:0:0: Direct-Access SAMSUNG File-Stor Gadget 0001 PQ: 0 ANSI: 2 [484323.337702] scsi 12:0:0:1: Direct-Access SAMSUNG File-Stor Gadget 0001 PQ: 0 ANSI: 2 [484323.338714] sd 12:0:0:0: Attached scsi generic sg5 type 0 [484323.339435] sd 12:0:0:1: Attached scsi generic sg6 type 0 [484323.346193] sd 12:0:0:1: [sde] Attached SCSI removable disk [484323.346810] sd 12:0:0:0: [sdd] Attached SCSI removable disk [484328.002464] usb 1-1: USB disconnect, device number 13 [484328.002470] usb 1-1.3: USB disconnect, device number 15 [484331.512033] usb 1-1: new high-speed USB device number 16 using ehci_hcd [484331.644747] hub 1-1:1.0: USB hub found [484331.644808] hub 1-1:1.0: 3 ports detected [484331.916070] usb 1-1.3: new high-speed USB device number 17 using ehci_hcd [484332.014760] scsi13 : usb-storage 1-1.3:1.0 [484333.013718] scsi 13:0:0:0: Direct-Access SAMSUNG File-Stor Gadget 0001 PQ: 0 ANSI: 2 [484333.014331] scsi 13:0:0:1: Direct-Access SAMSUNG File-Stor Gadget 0001 PQ: 0 ANSI: 2 [484333.015339] sd 13:0:0:0: Attached scsi generic sg5 type 0 [484333.024178] sd 13:0:0:1: Attached scsi generic sg6 type 0 [484333.026330] sd 13:0:0:1: [sde] Attached SCSI removable disk [484333.027204] sd 13:0:0:0: [sdd] Attached SCSI removable disk [484358.798602] usb 1-1: USB disconnect, device number 16 [484358.798609] usb 1-1.3: USB disconnect, device number 17 [484359.480332] hub 1-0:1.0: unable to enumerate USB device on port 1 [484361.052032] usb 1-1: new high-speed USB device number 19 using ehci_hcd [484361.184761] hub 1-1:1.0: USB hub found [484361.184819] hub 1-1:1.0: 3 ports detected [484361.456084] usb 1-1.3: new high-speed USB device number 20 using ehci_hcd [484361.572153] scsi14 : usb-storage 1-1.3:1.0 [484362.573104] scsi 14:0:0:0: Direct-Access SAMSUNG File-Stor Gadget 0001 PQ: 0 ANSI: 2 [484362.573592] scsi 14:0:0:1: Direct-Access SAMSUNG File-Stor Gadget 0001 PQ: 0 ANSI: 2 [484362.574592] sd 14:0:0:0: Attached scsi generic sg5 type 0 [484362.580521] sd 14:0:0:1: Attached scsi generic sg6 type 0 [484362.581337] sd 14:0:0:0: [sdd] Attached SCSI removable disk [484362.582585] sd 14:0:0:1: [sde] Attached SCSI removable disk [484430.233596] usb 1-1.3: USB disconnect, device number 20 [484430.440108] usb 1-1.3: new high-speed USB device number 21 using ehci_hcd [484450.737987] usb 1-1.3: usbfs: USBDEVFS_CONTROL failed cmd gvfs-gphoto2-vo rqt 33 rq 102 len 0 ret -71 [484450.969481] usb 1-1.3: USB disconnect, device number 21 [484451.168114] usb 1-1.3: new high-speed USB device number 22 using ehci_hcd [484455.015115] usb 1-1.3: usbfs: USBDEVFS_CONTROL failed cmd gvfs-gphoto2-vo rqt 33 rq 102 len 0 ret -71 [484455.023110] usb 1-1.3: usbfs: USBDEVFS_CONTROL failed cmd gvfs-gphoto2-vo rqt 33 rq 102 len 0 ret -71 [484455.031110] usb 1-1.3: usbfs: USBDEVFS_CONTROL failed cmd gvfs-gphoto2-vo rqt 33 rq 102 len 0 ret -71 [484455.065482] usb 1-1.3: USB disconnect, device number 22 [484455.296119] usb 1-1.3: new high-speed USB device number 23 using ehci_hcd [484462.927389] usb 1-1: USB disconnect, device number 19 [484462.927395] usb 1-1.3: USB disconnect, device number 23 [484467.716027] usb 1-1: new high-speed USB device number 24 using ehci_hcd [484467.848635] hub 1-1:1.0: USB hub found [484467.848696] hub 1-1:1.0: 3 ports detected [484468.120073] usb 1-1.3: new high-speed USB device number 25 using ehci_hcd [484472.716073] usb 1-1.3: usbfs: USBDEVFS_CONTROL failed cmd gvfs-gphoto2-vo rqt 33 rq 102 len 0 ret -71 [484472.724195] usb 1-1.3: usbfs: USBDEVFS_CONTROL failed cmd gvfs-gphoto2-vo rqt 33 rq 102 len 0 ret -71 [484472.732193] usb 1-1.3: usbfs: USBDEVFS_CONTROL failed cmd gvfs-gphoto2-vo rqt 33 rq 102 len 0 ret -71 [484472.861566] usb 1-1.3: USB disconnect, device number 25 [484473.060074] usb 1-1.3: new high-speed USB device number 26 using ehci_hcd [484473.158768] scsi15 : usb-storage 1-1.3:1.0 [484474.156967] scsi 15:0:0:0: Direct-Access SAMSUNG File-Stor Gadget 0001 PQ: 0 ANSI: 2 [484474.157460] scsi 15:0:0:1: Direct-Access SAMSUNG File-Stor Gadget 0001 PQ: 0 ANSI: 2 [484474.158351] sd 15:0:0:0: Attached scsi generic sg5 type 0 [484474.158630] sd 15:0:0:1: Attached scsi generic sg6 type 0 [484474.165837] sd 15:0:0:0: [sdd] Attached SCSI removable disk [484474.166579] sd 15:0:0:1: [sde] Attached SCSI removable disk [484476.748716] usb 1-1: USB disconnect, device number 24 [484476.748722] usb 1-1.3: USB disconnect, device number 26 [484481.356028] usb 1-2: new high-speed USB device number 27 using ehci_hcd [484481.412348] hub 1-0:1.0: unable to enumerate USB device on port 2 [484482.768021] usb 1-2: new high-speed USB device number 28 using ehci_hcd [484482.903380] hub 1-2:1.0: USB hub found [484482.903566] hub 1-2:1.0: 3 ports detected [484483.176101] usb 1-2.3: new high-speed USB device number 29 using ehci_hcd [484483.274540] scsi16 : usb-storage 1-2.3:1.0 [484484.272994] scsi 16:0:0:0: Direct-Access SAMSUNG File-Stor Gadget 0001 PQ: 0 ANSI: 2 [484484.273487] scsi 16:0:0:1: Direct-Access SAMSUNG File-Stor Gadget 0001 PQ: 0 ANSI: 2 [484484.274393] sd 16:0:0:0: Attached scsi generic sg5 type 0 [484484.274931] sd 16:0:0:1: Attached scsi generic sg6 type 0 [484484.280873] sd 16:0:0:0: [sdd] Attached SCSI removable disk [484484.281482] sd 16:0:0:1: [sde] Attached SCSI removable disk [484491.993850] usb 1-2.3: USB disconnect, device number 29 [484492.204104] usb 1-2.3: new high-speed USB device number 30 using ehci_hcd [484497.580140] usb 1-2: USB disconnect, device number 28 [484497.580146] usb 1-2.3: USB disconnect, device number 30 [484504.272030] usb 1-2: new high-speed USB device number 31 using ehci_hcd [484504.404712] hub 1-2:1.0: USB hub found [484504.404774] hub 1-2:1.0: 3 ports detected [484504.676150] usb 1-2.3: new high-speed USB device number 32 using ehci_hcd [484523.718408] usb 1-2.3: usbfs: USBDEVFS_CONTROL failed cmd gvfs-gphoto2-vo rqt 33 rq 102 len 0 ret -71 [484523.849277] usb 1-2.3: USB disconnect, device number 32 [484524.048160] usb 1-2.3: new high-speed USB device number 33 using ehci_hcd [484524.146352] scsi17 : usb-storage 1-2.3:1.0 [484525.144924] scsi 17:0:0:0: Direct-Access SAMSUNG File-Stor Gadget 0001 PQ: 0 ANSI: 2 [484525.145416] scsi 17:0:0:1: Direct-Access SAMSUNG File-Stor Gadget 0001 PQ: 0 ANSI: 2 [484525.146332] sd 17:0:0:0: Attached scsi generic sg5 type 0 [484525.146761] sd 17:0:0:1: Attached scsi generic sg6 type 0 [484525.151483] sd 17:0:0:0: [sdd] Attached SCSI removable disk [484525.152183] sd 17:0:0:1: [sde] Attached SCSI removable disk [484526.230553] usb 1-2: USB disconnect, device number 31 [484526.230559] usb 1-2.3: USB disconnect, device number 33 [484527.000035] usb 1-2: new high-speed USB device number 34 using ehci_hcd [484527.135349] hub 1-2:1.0: USB hub found [484527.135534] hub 1-2:1.0: 3 ports detected [484527.408167] usb 1-2.3: new high-speed USB device number 35 using ehci_hcd [484527.506748] scsi18 : usb-storage 1-2.3:1.0 [484528.512552] scsi 18:0:0:0: Direct-Access SAMSUNG File-Stor Gadget 0001 PQ: 0 ANSI: 2 [484528.513043] scsi 18:0:0:1: Direct-Access SAMSUNG File-Stor Gadget 0001 PQ: 0 ANSI: 2 [484528.513533] sd 18:0:0:0: Attached scsi generic sg5 type 0 [484528.513725] sd 18:0:0:1: Attached scsi generic sg6 type 0 [484528.520410] sd 18:0:0:0: [sdd] Attached SCSI removable disk [484528.521652] sd 18:0:0:1: [sde] Attached SCSI removable disk [484578.002449] usb 1-2: USB disconnect, device number 34 [484578.002455] usb 1-2.3: USB disconnect, device number 35 [484578.948027] usb 1-2: new high-speed USB device number 36 using ehci_hcd [484579.083378] hub 1-2:1.0: USB hub found [484579.083566] hub 1-2:1.0: 3 ports detected [484579.356183] usb 1-2.3: new high-speed USB device number 37 using ehci_hcd [484579.454629] scsi19 : usb-storage 1-2.3:1.0 [484580.453078] scsi 19:0:0:0: Direct-Access SAMSUNG File-Stor Gadget 0001 PQ: 0 ANSI: 2 [484580.454067] scsi 19:0:0:1: Direct-Access SAMSUNG File-Stor Gadget 0001 PQ: 0 ANSI: 2 [484580.454975] sd 19:0:0:0: Attached scsi generic sg5 type 0 [484580.455506] sd 19:0:0:1: Attached scsi generic sg6 type 0 [484580.466244] sd 19:0:0:0: [sdd] Attached SCSI removable disk [484580.467572] sd 19:0:0:1: [sde] Attached SCSI removable disk [484583.115574] usb 1-2: USB disconnect, device number 36 [484583.115581] usb 1-2.3: USB disconnect, device number 37 [484593.564027] usb 1-2: new high-speed USB device number 38 using ehci_hcd [484593.620278] hub 1-0:1.0: unable to enumerate USB device on port 2 [484595.256026] usb 1-2: new high-speed USB device number 39 using ehci_hcd [484595.391439] hub 1-2:1.0: USB hub found [484595.391626] hub 1-2:1.0: 3 ports detected [484595.664160] usb 1-2.3: new high-speed USB device number 40 using ehci_hcd [484595.762600] scsi20 : usb-storage 1-2.3:1.0 [484596.760926] scsi 20:0:0:0: Direct-Access SAMSUNG File-Stor Gadget 0001 PQ: 0 ANSI: 2 [484596.761417] scsi 20:0:0:1: Direct-Access SAMSUNG File-Stor Gadget 0001 PQ: 0 ANSI: 2 [484596.762318] sd 20:0:0:0: Attached scsi generic sg5 type 0 [484596.762633] sd 20:0:0:1: Attached scsi generic sg6 type 0 [484596.769808] sd 20:0:0:0: [sdd] Attached SCSI removable disk [484596.770411] sd 20:0:0:1: [sde] Attached SCSI removable disk [484601.650427] usb 1-2: USB disconnect, device number 39 [484601.650433] usb 1-2.3: USB disconnect, device number 40 [484665.108039] usb 1-2: new high-speed USB device number 41 using ehci_hcd [484665.240675] hub 1-2:1.0: USB hub found [484665.243611] hub 1-2:1.0: 3 ports detected [484665.516129] usb 1-2.3: new high-speed USB device number 42 using ehci_hcd [484665.614911] scsi21 : usb-storage 1-2.3:1.1 [484666.612893] scsi 21:0:0:0: Direct-Access SAMSUNG File-Stor Gadget 0001 PQ: 0 ANSI: 2 [484666.613382] scsi 21:0:0:1: Direct-Access SAMSUNG File-Stor Gadget 0001 PQ: 0 ANSI: 2 [484666.614505] sd 21:0:0:0: Attached scsi generic sg5 type 0 [484666.615013] sd 21:0:0:1: Attached scsi generic sg6 type 0 [484666.617509] sd 21:0:0:0: [sdd] 24133632 512-byte logical blocks: (12.3 GB/11.5 GiB) [484666.618181] sd 21:0:0:0: [sdd] Write Protect is off [484666.618188] sd 21:0:0:0: [sdd] Mode Sense: 0f 00 00 00 [484666.618756] sd 21:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [484666.624816] sdd: [484666.629114] sd 21:0:0:1: [sde] Attached SCSI removable disk [484666.634140] sd 21:0:0:0: [sdd] Attached SCSI removable disk [485041.818629] sdd: detected capacity change from 12356419584 to 0 [485051.785294] usb 1-2: USB disconnect, device number 41 [485051.785300] usb 1-2.3: USB disconnect, device number 42 [485051.786368] sd 21:0:0:0: [sdd] Synchronizing SCSI cache [485051.786434] sd 21:0:0:0: [sdd] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [487993.084023] usb 1-1: new high-speed USB device number 43 using ehci_hcd [487993.219547] hub 1-1:1.0: USB hub found [487993.219731] hub 1-1:1.0: 3 ports detected [487993.492173] usb 1-1.3: new high-speed USB device number 44 using ehci_hcd [487993.590590] scsi22 : usb-storage 1-1.3:1.0 [487994.589063] scsi 22:0:0:0: Direct-Access SAMSUNG File-Stor Gadget 0001 PQ: 0 ANSI: 2 [487994.589429] scsi 22:0:0:1: Direct-Access SAMSUNG File-Stor Gadget 0001 PQ: 0 ANSI: 2 [487994.590419] sd 22:0:0:0: Attached scsi generic sg5 type 0 [487994.597704] sd 22:0:0:1: Attached scsi generic sg6 type 0 [487994.599053] sd 22:0:0:0: [sdd] Attached SCSI removable disk [487994.600310] sd 22:0:0:1: [sde] Attached SCSI removable disk [488003.049559] sd 22:0:0:0: [sdd] 3860480 512-byte logical blocks: (1.97 GB/1.84 GiB) [488003.049927] sd 22:0:0:1: [sde] 24133632 512-byte logical blocks: (12.3 GB/11.5 GiB) [488003.051425] sd 22:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [488003.051925] sd 22:0:0:1: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [488003.074199] sdd: [488003.075946] sde: [489094.112593] sde: detected capacity change from 12356419584 to 0 [489099.121735] usb 1-1: USB disconnect, device number 43 [489099.121741] usb 1-1.3: USB disconnect, device number 44 [489099.125480] sd 22:0:0:0: [sdd] Synchronizing SCSI cache [489099.125612] sd 22:0:0:0: [sdd] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [489099.128315] sd 22:0:0:1: [sde] Synchronizing SCSI cache [489099.128355] sd 22:0:0:1: [sde] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [554273.669156] CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3 [555154.456382] audit_printk_skb: 36 callbacks suppressed [555154.456386] type=1701 audit(1351963113.247:24): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=6167 comm="chrome" reason="seccomp" sig=0 syscall=39 compat=0 ip=0x7fcf5f80ded9 code=0x50001 [555167.730051] type=1701 audit(1351963126.519:25): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=6435 comm="chrome" reason="seccomp" sig=0 syscall=39 compat=0 ip=0x7f6b92ac5ed9 code=0x50001 [555227.198000] type=1701 audit(1351963185.987:26): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=6474 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7fcf5f8046b0 code=0x50002 [555227.198015] type=1701 audit(1351963185.987:27): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=6474 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7fcf5f8046b0 code=0x50002 [555227.231142] type=1701 audit(1351963186.019:28): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=6480 comm="chrome" reason="seccomp" sig=0 syscall=59 compat=0 ip=0x7fcf5f7ddc27 code=0x50002 [555227.833677] type=1701 audit(1351963186.623:29): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=6419 comm="chrome" reason="seccomp" sig=0 syscall=83 compat=0 ip=0x7f6b92abc647 code=0x50002 [555227.833686] type=1701 audit(1351963186.623:30): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=6419 comm="chrome" reason="seccomp" sig=0 syscall=83 compat=0 ip=0x7f6b92abc647 code=0x50002 [555228.069151] type=1701 audit(1351963186.859:31): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=6419 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f6b92abc6b0 code=0x30004 [555228.069177] type=1701 audit(1351963186.859:32): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=6419 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f6b92abc6b0 code=0x30004