[ 0.000000] Linux version 2.6.24-17-rt (buildd@crested) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP PREEMPT RT Thu May 1 15:21:57 UTC 2008 (Ubuntu 2.6.24-4.6-generic) [ 0.000000] Command line: root=UUID=af17c779-4b6b-407a-a2fe-5ffc00d6b536 ro all_generic_ide quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000057eb0000 (usable) [ 0.000000] BIOS-e820: 0000000057eb0000 - 0000000057eb8000 (ACPI data) [ 0.000000] BIOS-e820: 0000000057eb8000 - 0000000057f00000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000057f00000 - 0000000060000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 360112) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F8190 checksum 0 [ 0.000000] ACPI: RSDP 000F8190, 0014 (r0 GATEWA) [ 0.000000] ACPI: RSDT 57EB382B, 0034 (r1 GATEWA M300 20070416 LTP 0) [ 0.000000] ACPI: FACP 57EB7E41, 0074 (r1 GATEWA M300 20070416 PTL 5F) [ 0.000000] ACPI: DSDT 57EB385F, 45E2 (r1 GATEWA M300 20070416 MSFT 100000E) [ 0.000000] ACPI: FACS 57EB8FC0, 0040 [ 0.000000] ACPI: SSDT 57EB7EB5, 00B5 (r1 PTLTD POWERNOW 20070416 LTP 1) [ 0.000000] ACPI: APIC 57EB7F6A, 005A (r1 GATEWA M300 20070416 LTP 0) [ 0.000000] ACPI: MCFG 57EB7FC4, 003C (r1 GATEWA M300 20070416 LTP 0) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] CPU has 1 num_cores [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000057eb0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 360112) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-0000000057eb0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 360112 [ 0.000000] On node 0 totalpages: 360015 [ 0.000000] DMA zone: 96 pages used for memmap [ 0.000000] DMA zone: 1281 pages reserved [ 0.000000] DMA zone: 2622 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8344 pages used for memmap [ 0.000000] DMA32 zone: 347672 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ce000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000ce000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 70000000 (gap: 60000000:9ec00000) [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 33432 bytes of per cpu data [ 0.000000] Real-Time Preemption Support (C) 2004-2007 Ingo Molnar [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 350294 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=af17c779-4b6b-407a-a2fe-5ffc00d6b536 ro all_generic_ide quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC calibrated against PM_TIMER [ 15.237044] time.c: Detected 1591.853 MHz processor. [ 15.237934] Console: colour VGA+ 80x25 [ 15.237937] console [tty0] enabled [ 15.237960] Checking aperture... [ 15.237963] CPU 0: aperture @ e37e000000 size 32 MB [ 15.237965] Aperture too small (32 MB) [ 15.249962] No AGP bridge found [ 15.291638] Memory: 1392992k/1440448k available (2545k kernel code, 47068k reserved, 1356k data, 348k init) [ 15.350950] Calibrating delay using timer specific routine.. 3185.76 BogoMIPS (lpj=1592882) [ 15.351011] Security Framework initialized [ 15.351019] SELinux: Disabled at boot. [ 15.351033] AppArmor: AppArmor initialized [ 15.351039] Failure registering capabilities with primary security module. [ 15.351271] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 15.354182] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 15.355605] Mount-cache hash table entries: 256 [ 15.355882] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 15.355886] CPU: L2 Cache: 1024K (64 bytes/line) [ 15.355890] CPU 0/0 -> Node 0 [ 15.355920] SMP alternatives: switching to UP code [ 15.356517] Freeing SMP alternatives: 20k freed [ 15.357732] Early unpacking initramfs... done [ 15.786441] ACPI: Core revision 20070126 [ 15.786518] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 15.801764] Using local APIC timer interrupts. [ 15.864564] APIC timer calibration result 12436350 [ 15.864567] Detected 12.436 MHz APIC timer. [ 15.865172] Brought up 1 CPUs [ 15.865249] CPU0 attaching sched-domain: [ 15.865252] domain 0: span 01 [ 15.865255] groups: 01 [ 15.865499] net_namespace: 144 bytes [ 15.866049] Time: 14:50:13 Date: 05/22/08 [ 15.866102] NET: Registered protocol family 16 [ 15.866392] ACPI: bus type pci registered [ 15.866509] PCI: Using configuration type 1 [ 15.867806] ACPI: EC: Look up EC in DSDT [ 15.869618] ACPI: Interpreter enabled [ 15.869622] ACPI: (supports S0 S3 S4 S5) [ 15.869640] ACPI: Using IOAPIC for interrupt routing [ 15.870530] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 15.875688] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 15.875691] ACPI: EC: driver started in interrupt mode [ 15.875748] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 15.877480] PCI: Transparent bridge - 0000:00:14.4 [ 15.877570] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 15.877768] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT] [ 15.877940] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 15.878120] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 15.881400] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. [ 15.881528] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. [ 15.881664] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. [ 15.881789] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. [ 15.881921] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. [ 15.882046] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. [ 15.882171] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. [ 15.882296] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. [ 15.882422] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled. [ 15.882572] Linux Plug and Play Support v0.97 (c) Adam Belay [ 15.882622] pnp: PnP ACPI init [ 15.882632] ACPI: bus type pnp registered [ 15.885625] pnp: PnP ACPI: found 10 devices [ 15.885627] ACPI: ACPI bus type pnp unregistered [ 15.885968] PCI: Using ACPI for IRQ routing [ 15.885971] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 15.896628] NET: Registered protocol family 8 [ 15.896631] NET: Registered protocol family 20 [ 15.896825] AppArmor: AppArmor Filesystem Enabled [ 15.908628] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 15.908633] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 15.908638] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved [ 15.908648] system 00:06: iomem range 0xe0000-0xfffff could not be reserved [ 15.908652] system 00:06: iomem range 0xfff80000-0xffffffff could not be reserved [ 15.908656] system 00:06: iomem range 0x0-0xfff could not be reserved [ 15.908664] system 00:09: ioport range 0x1080-0x1080 has been reserved [ 15.908668] system 00:09: ioport range 0x220-0x22f has been reserved [ 15.908672] system 00:09: ioport range 0x40b-0x40b has been reserved [ 15.908675] system 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 15.908679] system 00:09: ioport range 0x4d6-0x4d6 has been reserved [ 15.908683] system 00:09: ioport range 0x530-0x537 has been reserved [ 15.908686] system 00:09: ioport range 0xc00-0xc01 has been reserved [ 15.908690] system 00:09: ioport range 0xc14-0xc14 has been reserved [ 15.908693] system 00:09: ioport range 0xc50-0xc52 has been reserved [ 15.908697] system 00:09: ioport range 0xc6c-0xc6c has been reserved [ 15.908700] system 00:09: ioport range 0xc6f-0xc6f has been reserved [ 15.908704] system 00:09: ioport range 0xcd4-0xcd5 has been reserved [ 15.908708] system 00:09: ioport range 0xcd6-0xcd7 has been reserved [ 15.908711] system 00:09: ioport range 0xcd8-0xcdf has been reserved [ 15.908715] system 00:09: ioport range 0x8000-0x805f has been reserved [ 15.908719] system 00:09: ioport range 0xf40-0xf47 has been reserved [ 15.908722] system 00:09: ioport range 0x280-0x293 has been reserved [ 15.908726] system 00:09: ioport range 0x87f-0x87f has been reserved [ 15.909243] PCI: Bridge: 0000:00:01.0 [ 15.909246] IO window: 9000-9fff [ 15.909249] MEM window: c0100000-c01fffff [ 15.909252] PREFETCH window: c8000000-cfffffff [ 15.909255] PCI: Bridge: 0000:00:06.0 [ 15.909257] IO window: a000-afff [ 15.909260] MEM window: c0200000-c02fffff [ 15.909262] PREFETCH window: disabled. [ 15.909277] PCI: Bus 6, cardbus bridge: 0000:05:09.0 [ 15.909279] IO window: 0000b400-0000b4ff [ 15.909284] IO window: 0000b800-0000b8ff [ 15.909290] PREFETCH window: 70000000-73ffffff [ 15.909296] MEM window: 74000000-77ffffff [ 15.909301] PCI: Bridge: 0000:00:14.4 [ 15.909304] IO window: b000-bfff [ 15.909310] MEM window: c0300000-c03fffff [ 15.909315] PREFETCH window: disabled. [ 15.909337] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 15.909365] ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 15.909445] NET: Registered protocol family 2 [ 15.944707] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 15.946231] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 15.952657] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes) [ 15.958392] TCP: Hash tables configured (established 262144 bind 65536) [ 15.958399] TCP reno registered [ 15.969777] checking if image is initramfs... it is [ 16.781278] Freeing initrd memory: 7918k freed [ 16.792989] audit: initializing netlink socket (disabled) [ 16.793009] audit(1211467814.482:1): initialized [ 16.793148] krcupreemptd setsched 0 [ 16.793150] prio = 98 [ 16.793315] VFS: Disk quotas dquot_6.5.1 [ 16.793356] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 16.793462] io scheduler noop registered [ 16.793466] io scheduler anticipatory registered [ 16.793469] io scheduler deadline registered [ 16.793490] io scheduler cfq registered (default) [ 16.793496] PCI: MSI quirk detected. MSI deactivated. [ 17.445550] Boot video device is 0000:01:05.0 [ 17.445800] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 17.445826] assign_interrupt_mode Found MSI capability [ 17.445830] Allocate Port Service[0000:00:06.0:pcie00] [ 17.483797] Real Time Clock Driver v1.12ac [ 17.483942] Linux agpgart interface v0.102 [ 17.483946] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 17.484634] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17 [ 17.484641] ACPI: PCI interrupt for device 0000:00:14.6 disabled [ 17.485662] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 17.485753] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 17.485865] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 17.487850] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 17.487856] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 17.497313] mice: PS/2 mouse device common for all mice [ 17.497368] cpuidle: using governor ladder [ 17.497371] cpuidle: using governor menu [ 17.497474] NET: Registered protocol family 1 [ 17.497552] registered taskstats version 1 [ 17.497718] Magic number: 8:917:839 [ 17.497824] hash matches device ptyu5 [ 17.497886] /build/buildd/linux-2.6.24/debian/build/custom-source-rt/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 17.497892] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 17.497894] EDD information not available. [ 17.497904] Freeing unused kernel memory: 348k freed [ 17.531155] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 17.613799] SCSI subsystem initialized [ 17.620869] libata version 3.00 loaded. [ 17.622314] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 17.622378] PCI: Setting latency timer of device 0000:00:14.1 to 64 [ 17.622506] scsi0 : ata_generic [ 17.622590] scsi1 : ata_generic [ 17.623797] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8410 irq 14 [ 17.623801] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8418 irq 15 [ 17.777746] ata1.00: ATA-6: ST980829A, 3.06, max UDMA/100 [ 17.777750] ata1.00: 156301488 sectors, multi 16: LBA48 [ 17.777764] ata1.00: configured for UDMA/100 [ 18.093489] ata2.00: ATAPI: PHILIPS DVD+/-RW SDVD8820, AX03, max UDMA/33 [ 18.093502] ata2.00: configured for UDMA/33 [ 18.104096] scsi 0:0:0:0: Direct-Access ATA ST980829A 3.06 PQ: 0 ANSI: 5 [ 18.105506] scsi 1:0:0:0: CD-ROM PHILIPS DVD+-RW SDVD8820 AX03 PQ: 0 ANSI: 5 [ 19.241770] fuse init (API version 7.9) [ 19.253782] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 19.253791] ACPI: Processor [CPU0] (supports 8 throttling states) [ 19.254909] Marking TSC unstable due to TSC halts in idle [ 19.256211] ACPI: Thermal Zone [THRM] (36 C) [ 19.930504] usbcore: registered new interface driver usbfs [ 19.930531] usbcore: registered new interface driver hub [ 19.941573] usbcore: registered new device driver usb [ 19.954797] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 19.954872] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 19.955219] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 19.955900] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 19.968430] ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0000000 [ 20.023617] usb usb1: configuration #1 chosen from 1 choice [ 20.023648] hub 1-0:1.0: USB hub found [ 20.023663] hub 1-0:1.0: 4 ports detected [ 20.124514] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19 [ 20.124840] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 20.124940] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [ 20.124966] ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0001000 [ 20.179579] usb usb2: configuration #1 chosen from 1 choice [ 20.179611] hub 2-0:1.0: USB hub found [ 20.179625] hub 2-0:1.0: 4 ports detected [ 20.280497] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19 [ 20.280883] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 20.280968] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 20.281036] ehci_hcd 0000:00:13.2: irq 19, io mem 0xc0002000 [ 20.385303] usb 1-1: new low speed USB device using ohci_hcd and address 2 [ 20.391307] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 20.391447] usb usb3: configuration #1 chosen from 1 choice [ 20.391474] hub 3-0:1.0: USB hub found [ 20.391485] hub 3-0:1.0: 8 ports detected [ 20.493327] ACPI: PCI Interrupt 0000:05:09.2[C] -> GSI 21 (level, low) -> IRQ 21 [ 20.554709] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[c0306800-c0306fff] Max Packet=[2048] IR/IT contexts=[4/8] [ 20.562265] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 20.562272] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 20.574298] Driver 'sd' needs updating - please use bus_type methods [ 20.574404] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 20.574420] sd 0:0:0:0: [sda] Write Protect is off [ 20.574424] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 20.574446] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.574506] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 20.574519] sd 0:0:0:0: [sda] Write Protect is off [ 20.574522] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 20.574541] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.574547] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 20.587305] sda1 sda2 sda3 [ 20.602610] sd 0:0:0:0: [sda] Attached SCSI disk [ 20.611169] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 20.611199] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 20.622000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 20.622008] Uniform CD-ROM driver Revision: 3.20 [ 20.622070] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 21.011125] usb 3-3: new high speed USB device using ehci_hcd and address 3 [ 21.126576] usb 3-3: configuration #1 chosen from 1 choice [ 21.208272] Attempting manual resume [ 21.208276] swsusp: Resume From Partition 8:2 [ 21.208279] PM: Checking swsusp image. [ 21.208480] PM: Resume from disk failed. [ 21.223745] EXT3-fs: INFO: recovery required on readonly filesystem. [ 21.223750] EXT3-fs: write access will be enabled during recovery. [ 21.387034] usb 1-1: new low speed USB device using ohci_hcd and address 3 [ 21.573899] usb 1-1: configuration #1 chosen from 1 choice [ 21.610407] usbcore: registered new interface driver hiddev [ 21.616222] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.0/input/input2 [ 21.625996] input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:13.0-1 [ 21.635163] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.1/input/input3 [ 21.657984] input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:13.0-1 [ 21.658001] usbcore: registered new interface driver usbhid [ 21.658005] /build/buildd/linux-2.6.24/debian/build/custom-source-rt/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 24.458364] kjournald starting. Commit interval 5 seconds [ 24.458387] EXT3-fs: sda1: orphan cleanup on readonly fs [ 24.458396] ext3_orphan_cleanup: deleting unreferenced inode 2423774 [ 24.458447] EXT3-fs: sda1: 1 orphan inode deleted [ 24.458449] EXT3-fs: recovery complete. [ 24.486978] EXT3-fs: mounted filesystem with ordered data mode. [ 40.569653] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 41.802281] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 41.939268] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [ 42.039259] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 42.107465] input: Power Button (FF) as /devices/virtual/input/input5 [ 42.129324] ACPI: Power Button (FF) [PWRF] [ 42.129396] input: Power Button (CM) as /devices/virtual/input/input6 [ 42.152207] ACPI: Power Button (CM) [PWRB] [ 42.152300] input: Sleep Button (CM) as /devices/virtual/input/input7 [ 42.178295] ACPI: Sleep Button (CM) [SLPB] [ 42.178386] input: Lid Switch as /devices/virtual/input/input8 [ 42.188491] ACPI: Lid Switch [LID] [ 42.192319] ACPI: AC Adapter [ACAD] (on-line) [ 42.278331] ACPI: Battery Slot [BAT1] (battery present) [ 42.719069] ACPI: PCI Interrupt 0000:05:09.3[A] -> GSI 23 (level, low) -> IRQ 23 [ 42.799042] Yenta: CardBus bridge found at 0000:05:09.0 [107b:0300] [ 42.799070] Yenta: Enabling burst memory read transactions [ 42.799077] Yenta: Using CSCINT to route CSC interrupts to PCI [ 42.799079] Yenta: Routing CardBus interrupts to PCI [ 42.799085] Yenta TI: socket 0000:05:09.0, mfunc 0x01ac1b22, devctl 0x64 [ 42.927922] sdhci: Secure Digital Host Controller Interface driver [ 42.927928] sdhci: Copyright(c) Pierre Ossman [ 43.022780] Yenta: ISA IRQ mask 0x0ef8, PCI irq 23 [ 43.022786] Socket status: 30000006 [ 43.022789] Yenta: Raising subordinate bus# of parent bus (#05) from #06 to #09 [ 43.022797] pcmcia: parent PCI bridge I/O window: 0xb000 - 0xbfff [ 43.022801] pcmcia: parent PCI bridge Memory window: 0xc0300000 - 0xc03fffff [ 43.127220] sdhci: SDHCI controller found at 0000:05:09.4 [104c:8034] (rev 0) [ 43.127250] ACPI: PCI Interrupt 0000:05:09.4[A] -> GSI 23 (level, low) -> IRQ 23 [ 43.127537] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it. [ 43.127646] mmc0: SDHCI at 0xc0307400 irq 23 DMA [ 43.127796] sdhci:slot1: Will use DMA mode even though HW doesn't fully claim to support it. [ 43.127979] mmc1: SDHCI at 0xc0307000 irq 23 DMA [ 43.128123] sdhci:slot2: Will use DMA mode even though HW doesn't fully claim to support it. [ 43.128206] mmc2: SDHCI at 0xc0306400 irq 23 DMA [ 43.582742] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x23aeb3, caps: 0xa04713/0x10008 [ 43.615472] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9 [ 43.859058] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:12/LNXVIDEO:00/input/input10 [ 43.881674] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 43.904746] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 43.904765] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 43.904978] sky2 0000:03:00.0: v1.20 addr 0xc0200000 irq 18 Yukon-FE (0xb7) rev 1 [ 43.920456] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 43.952632] sky2 eth0: addr 00:e0:b8:b6:9a:90 [ 44.133980] [fglrx] Maximum main memory to use for locked dma buffers: 1270 MBytes. [ 44.134020] [fglrx] ASYNCIO init succeed! [ 44.134398] [fglrx] PAT is enabled successfully! [ 44.134437] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0 [ 44.458507] ieee80211_crypt: registered algorithm 'NULL' [ 44.476492] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 44.476497] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 44.732022] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 44.766390] usb 3-3: reset high speed USB device using ehci_hcd and address 3 [ 44.775378] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17 [ 44.878384] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-rt/sound/alsa-driver/pci/ac97/ac97_codec.c:2160: MC'97 0 converters and GPIO not ready (0x1) [ 44.886113] zd1211rw 3-3:1.0: eth1 [ 44.886141] usbcore: registered new interface driver zd1211rw [ 47.392550] lp: driver loaded but no devices found [ 47.889481] Adding 996020k swap on /dev/sda2. Priority:-1 extents:1 across:996020k [ 48.466058] EXT3 FS on sda1, internal journal [ 48.690395] device-mapper: uevent: version 1.0.3 [ 48.690445] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 66.956328] kjournald starting. Commit interval 5 seconds [ 66.956543] EXT3 FS on sda3, internal journal [ 66.956550] EXT3-fs: mounted filesystem with ordered data mode. [ 67.900994] ip_tables: (C) 2000-2006 Netfilter Core Team [ 69.732359] No dock devices found. [ 70.132625] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology ML-30 processors (1 cpu cores) (version 2.20.00) [ 70.132670] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x4 [ 70.132673] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x16 [ 73.904367] NET: Registered protocol family 10 [ 73.905309] lo: Disabled Privacy Extensions [ 74.385064] ppdev: user-space parallel port driver [ 74.688155] audit(1211467872.588:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5410 profile="/usr/sbin/cupsd" namespace="default" [ 74.761234] tun: Universal TUN/TAP device driver, 1.6 [ 74.761964] tun: (C) 1999-2004 Max Krasnyansky [ 76.361260] NET: Registered protocol family 17 [ 78.205850] ndiswrapper version 1.52 loaded (smp=yes, preempt=rt) [ 78.212075] usbcore: registered new interface driver ndiswrapper [ 79.606178] Clocksource tsc unstable (delta = -250007866 ns) [ 81.530841] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 81.531662] vboxdrv: Successfully done. [ 81.532180] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 81.532971] vboxdrv: Successfully loaded version 1.5.6_OSE (interface 0x00050002). [ 82.856098] zd1211rw 3-3:1.0: firmware version 4605 [ 82.876099] zd1211rw 3-3:1.0: zd1211 chip 0ace:1211 v4330 high 00-03-1b RF2959_RF pa0 g---- [ 82.886998] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 82.915281] Bluetooth: Core ver 2.11 [ 82.915948] sky2 eth0: enabling interface [ 82.919707] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 82.922032] NET: Registered protocol family 31 [ 82.922037] Bluetooth: HCI device and connection manager initialized [ 82.922041] Bluetooth: HCI socket layer initialized [ 83.003268] Bluetooth: L2CAP ver 2.9 [ 83.003783] Bluetooth: L2CAP socket layer initialized [ 83.061726] SoftMAC: Open Authentication completed with 00:17:3f:06:d9:a0 [ 83.072650] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 83.103323] Bluetooth: RFCOMM socket layer initialized [ 83.104060] Bluetooth: RFCOMM TTY layer initialized [ 83.104642] Bluetooth: RFCOMM ver 1.8 [ 86.469180] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 88.483363] [fglrx] GART Table is not in FRAME_BUFFER range [ 88.484398] [fglrx] Reserve Block - 0 offset = 0X0 length = 0X40000 [ 88.485369] [fglrx] Reserve Block - 1 offset = 0X7ff5000 length = 0Xb000 [ 88.972102] [fglrx] interrupt source 20008000 successfully enabled [ 88.973175] [fglrx] enable ID = 0x00000004 [ 88.973872] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000 [ 89.963698] eth1: no IPv6 routers present [ 1243.995236] SoftMAC: Open Authentication completed with 00:1d:60:16:d3:3d [ 1244.033060] ieee80211_crypt: registered algorithm 'WEP' [ 1244.544064] SoftMAC: Open Authentication completed with 00:1d:60:16:d3:3d [ 1244.560216] SoftMAC: Open Authentication completed with 00:1d:60:16:d3:3d [ 1253.902605] tun0: Disabled Privacy Extensions [ 1261.224356] eth1: no IPv6 routers present [ 4233.202422] dbus-daemon[5257]: segfault at 7fe705dd18e0 rip 7fe704eedae2 rsp 7fff0daa4778 error 4 [ 6146.027386] zd1211rw 3-3:1.0: zd_chip_control_leds error -110