[    0.000000] Detected 2399.828 MHz processor.
[    0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.65 BogoMIPS (lpj=9599312)
[    0.004044] Mount-cache hash table entries: 512
[    0.004159] Initializing cgroup subsys ns
[    0.004164] Initializing cgroup subsys cpuacct
[    0.004167] Initializing cgroup subsys memory
[    0.004174] Initializing cgroup subsys devices
[    0.004176] Initializing cgroup subsys freezer
[    0.004178] Initializing cgroup subsys net_cls
[    0.004196] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004201] CPU: Physical Processor ID: 0
[    0.004203] CPU: Processor Core ID: 0
[    0.004206] mce: CPU supports 6 MCE banks
[    0.004215] CPU0: Thermal monitoring enabled (TM2)
[    0.004218] using mwait in idle threads.
[    0.004224] Performance Events: Core2 events, Intel PMU driver.
[    0.004229] ... version:                2
[    0.004230] ... bit width:              40
[    0.004232] ... generic registers:      2
[    0.004235] ... max period:             000000007fffffff
[    0.004237] ... fixed-purpose events:   3
[    0.022472] ACPI: Core revision 20090903
[    0.032008] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.032012] ftrace: allocating 22402 entries in 44 pages
[    0.036045] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.036350] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.078305] CPU0: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
[    0.080001] APIC calibration not consistent with PM-Timer: 135ms instead of 100ms
[    0.080001] APIC delta adjusted to PM-Timer: 1666644 (2266620)
[    0.080001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.008000] Initializing CPU#1
[    0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.008000] CPU: L2 cache: 4096K
[    0.008000] CPU: Physical Processor ID: 0
[    0.008000] CPU: Processor Core ID: 1
[    0.008000] CPU1: Thermal monitoring enabled (TM2)
[    0.164085] CPU1: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
[    0.164093] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.168018] Brought up 2 CPUs
[    0.168021] Total of 2 processors activated (9599.61 BogoMIPS).
[    0.168582] CPU0 attaching sched-domain:
[    0.168585]  domain 0: span 0-1 level MC
[    0.168587]   groups: 0 1
[    0.168593] CPU1 attaching sched-domain:
[    0.168595]  domain 0: span 0-1 level MC
[    0.168597]   groups: 1 0
[    0.168685] devtmpfs: initialized
[    0.168685] regulator: core version 0.5
[    0.168685] Time: 12:30:49  Date: 05/09/10
[    0.168685] NET: Registered protocol family 16
[    0.168685] Trying to unpack rootfs image as initramfs...
[    0.168685] EISA bus registered
[    0.168685] ACPI: bus type pci registered
[    0.168685] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[    0.168685] PCI: Not using MMCONFIG.
[    0.168685] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=4
[    0.168685] PCI: Using configuration type 1 for base access
[    0.172084] bio: create slab <bio-0> at 0
[    0.172870] ACPI: EC: Look up EC in DSDT
[    0.175644] ACPI: Executed 1 blocks of module-level executable AML code
[    0.180053] ACPI: Interpreter enabled
[    0.180064] ACPI: (supports S0 S1 S3 S4 S5)
[    0.180086] ACPI: Using IOAPIC for interrupt routing
[    0.180131] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[    0.183121] PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
[    0.183124] PCI: Using MMCONFIG for extended config space
[    0.189468] ACPI Warning: Incorrect checksum in table [OEMB] - 50, should be 4B (20090903/tbutils-314)
[    0.189575] ACPI: No dock devices found.
[    0.189657] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.189756] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.189759] pci 0000:00:01.0: PME# disabled
[    0.189820] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd5df8000-0xd5dfbfff]
[    0.189861] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.189864] pci 0000:00:1b.0: PME# disabled
[    0.189924] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.189928] pci 0000:00:1c.0: PME# disabled
[    0.189989] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.189993] pci 0000:00:1c.1: PME# disabled
[    0.190040] pci 0000:00:1d.0: reg 20 io port: [0x8000-0x801f]
[    0.190085] pci 0000:00:1d.1: reg 20 io port: [0x8400-0x841f]
[    0.190131] pci 0000:00:1d.2: reg 20 io port: [0x8800-0x881f]
[    0.190178] pci 0000:00:1d.3: reg 20 io port: [0x9000-0x901f]
[    0.190229] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd5dffc00-0xd5dfffff]
[    0.190277] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.190281] pci 0000:00:1d.7: PME# disabled
[    0.190400] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[    0.190404] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[    0.190408] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
[    0.190448] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[    0.190454] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[    0.190460] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[    0.190466] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[    0.190472] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[    0.190512] pci 0000:00:1f.2: reg 10 io port: [0xa800-0xa807]
[    0.190517] pci 0000:00:1f.2: reg 14 io port: [0xa400-0xa403]
[    0.190523] pci 0000:00:1f.2: reg 18 io port: [0xa000-0xa007]
[    0.190528] pci 0000:00:1f.2: reg 1c io port: [0x9800-0x9803]
[    0.190534] pci 0000:00:1f.2: reg 20 io port: [0x9400-0x940f]
[    0.190556] pci 0000:00:1f.2: PME# supported from D3hot
[    0.190560] pci 0000:00:1f.2: PME# disabled
[    0.190602] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[    0.190652] pci 0000:04:00.0: reg 10 32bit mmio: [0xd7000000-0xd7ffffff]
[    0.190661] pci 0000:04:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff]
[    0.190669] pci 0000:04:00.0: reg 1c 64bit mmio: [0xd6000000-0xd6ffffff]
[    0.190674] pci 0000:04:00.0: reg 24 io port: [0xe800-0xe87f]
[    0.190679] pci 0000:04:00.0: reg 30 32bit mmio pref: [0xd5fe0000-0xd5ffffff]
[    0.190736] pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
[    0.190739] pci 0000:00:01.0: bridge 32bit mmio: [0xd5f00000-0xd7ffffff]
[    0.190743] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
[    0.190781] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff]
[    0.190831] pci 0000:02:00.0: reg 10 io port: [0xc800-0xc8ff]
[    0.190850] pci 0000:02:00.0: reg 18 64bit mmio: [0xd5eff000-0xd5efffff]
[    0.190864] pci 0000:02:00.0: reg 20 64bit mmio pref: [0xdfff0000-0xdfffffff]
[    0.190872] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xd5ec0000-0xd5edffff]
[    0.190911] pci 0000:02:00.0: supports D1 D2
[    0.190912] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.190917] pci 0000:02:00.0: PME# disabled
[    0.190974] pci 0000:00:1c.1: bridge io port: [0xc000-0xcfff]
[    0.190978] pci 0000:00:1c.1: bridge 32bit mmio: [0xd5e00000-0xd5efffff]
[    0.190983] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xdff00000-0xdfffffff]
[    0.191018] pci 0000:01:01.0: reg 10 32bit mmio pref: [0xd8000000-0xdbffffff]
[    0.191095] pci 0000:01:02.0: reg 10 io port: [0xb800-0xb81f]
[    0.191139] pci 0000:01:02.0: supports D1 D2
[    0.191182] pci 0000:00:1e.0: transparent bridge
[    0.191185] pci 0000:00:1e.0: bridge io port: [0xb000-0xbfff]
[    0.191193] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd8000000-0xdfefffff]
[    0.191208] pci_bus 0000:00: on NUMA node 0
[    0.191212] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.191331] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.191383] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[    0.191472] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[    0.191522] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[    0.195119] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.195219] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.195316] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[    0.195412] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.195510] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.195606] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.195702] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.195799] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.195901] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.195905] vgaarb: loaded
[    0.196026] SCSI subsystem initialized
[    0.196104] libata version 3.00 loaded.
[    0.196165] usbcore: registered new interface driver usbfs
[    0.196175] usbcore: registered new interface driver hub
[    0.196199] usbcore: registered new device driver usb
[    0.196310] ACPI: WMI: Mapper loaded
[    0.196312] PCI: Using ACPI for IRQ routing
[    0.196450] NetLabel: Initializing
[    0.196452] NetLabel:  domain hash size = 128
[    0.196453] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.196464] NetLabel:  unlabeled traffic allowed by default
[    0.196495] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.196500] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.200180] Switching to clocksource tsc
[    0.202129] AppArmor: AppArmor Filesystem Enabled
[    0.202141] pnp: PnP ACPI init
[    0.202152] ACPI: bus type pnp registered
[    0.205686] pnp: PnP ACPI: found 18 devices
[    0.205688] ACPI: ACPI bus type pnp unregistered
[    0.205692] PnPBIOS: Disabled by ACPI PNP
[    0.205702] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[    0.205710] system 00:07: ioport range 0x290-0x297 has been reserved
[    0.205715] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.205718] system 00:08: ioport range 0x800-0x87f has been reserved
[    0.205720] system 00:08: ioport range 0x480-0x4bf has been reserved
[    0.205723] system 00:08: ioport range 0x900-0x91f has been reserved
[    0.205726] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.205728] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
[    0.205731] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
[    0.205734] system 00:08: iomem range 0xfff00000-0xffffffff has been reserved
[    0.205740] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.205743] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.205748] system 00:0f: iomem range 0xffc00000-0xffefffff has been reserved
[    0.205753] system 00:10: iomem range 0xf0000000-0xf3ffffff has been reserved
[    0.205759] system 00:11: iomem range 0x0-0x9ffff could not be reserved
[    0.205761] system 00:11: iomem range 0xc0000-0xdffff could not be reserved
[    0.205764] system 00:11: iomem range 0xe0000-0xfffff could not be reserved
[    0.205766] system 00:11: iomem range 0x100000-0xcfffffff could not be reserved
[    0.240471] pci 0000:00:01.0: PCI bridge, secondary bus 0000:04
[    0.240474] pci 0000:00:01.0:   IO window: 0xe000-0xefff
[    0.240478] pci 0000:00:01.0:   MEM window: 0xd5f00000-0xd7ffffff
[    0.240481] pci 0000:00:01.0:   PREFETCH window: 0x000000e0000000-0x000000efffffff
[    0.240486] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
[    0.240488] pci 0000:00:1c.0:   IO window: 0xd000-0xdfff
[    0.240493] pci 0000:00:1c.0:   MEM window: 0xd0000000-0xd01fffff
[    0.240497] pci 0000:00:1c.0:   PREFETCH window: 0x000000d0200000-0x000000d03fffff
[    0.240503] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[    0.240506] pci 0000:00:1c.1:   IO window: 0xc000-0xcfff
[    0.240511] pci 0000:00:1c.1:   MEM window: 0xd5e00000-0xd5efffff
[    0.240515] pci 0000:00:1c.1:   PREFETCH window: 0x000000dff00000-0x000000dfffffff
[    0.240521] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[    0.240524] pci 0000:00:1e.0:   IO window: 0xb000-0xbfff
[    0.240528] pci 0000:00:1e.0:   MEM window: disabled
[    0.240532] pci 0000:00:1e.0:   PREFETCH window: 0x000000d8000000-0x000000dfefffff
[    0.240548]   alloc irq_desc for 16 on node -1
[    0.240550]   alloc kstat_irqs on node -1
[    0.240557] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.240561] pci 0000:00:01.0: setting latency timer to 64
[    0.240568] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.240572] pci 0000:00:1c.0: setting latency timer to 64
[    0.240579]   alloc irq_desc for 17 on node -1
[    0.240581]   alloc kstat_irqs on node -1
[    0.240584] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.240588] pci 0000:00:1c.1: setting latency timer to 64
[    0.240594] pci 0000:00:1e.0: setting latency timer to 64
[    0.240598] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.240600] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.240602] pci_bus 0000:04: resource 0 io:  [0xe000-0xefff]
[    0.240604] pci_bus 0000:04: resource 1 mem: [0xd5f00000-0xd7ffffff]
[    0.240607] pci_bus 0000:04: resource 2 pref mem [0xe0000000-0xefffffff]
[    0.240609] pci_bus 0000:03: resource 0 io:  [0xd000-0xdfff]
[    0.240611] pci_bus 0000:03: resource 1 mem: [0xd0000000-0xd01fffff]
[    0.240613] pci_bus 0000:03: resource 2 pref mem [0xd0200000-0xd03fffff]
[    0.240615] pci_bus 0000:02: resource 0 io:  [0xc000-0xcfff]
[    0.240618] pci_bus 0000:02: resource 1 mem: [0xd5e00000-0xd5efffff]
[    0.240620] pci_bus 0000:02: resource 2 pref mem [0xdff00000-0xdfffffff]
[    0.240622] pci_bus 0000:01: resource 0 io:  [0xb000-0xbfff]
[    0.240624] pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfefffff]
[    0.240626] pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
[    0.240628] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[    0.240663] NET: Registered protocol family 2
[    0.240763] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.241045] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.241504] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.241725] TCP: Hash tables configured (established 131072 bind 65536)
[    0.241727] TCP reno registered
[    0.241803] NET: Registered protocol family 1
[    0.241907] pci 0000:04:00.0: Boot video device
[    0.242080] cpufreq-nforce2: No nForce2 chipset.
[    0.242104] Scanning for low memory corruption every 60 seconds
[    0.242200] audit: initializing netlink socket (disabled)
[    0.242209] type=2000 audit(1273408249.239:1): initialized
[    0.250952] highmem bounce pool size: 64 pages
[    0.250957] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.252234] VFS: Disk quotas dquot_6.5.2
[    0.252287] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.252791] fuse init (API version 7.13)
[    0.252865] msgmni has been set to 1660
[    0.253055] alg: No test for stdrng (krng)
[    0.253100] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.253103] io scheduler noop registered
[    0.253104] io scheduler anticipatory registered
[    0.253106] io scheduler deadline registered
[    0.253138] io scheduler cfq registered (default)
[    0.253265]   alloc irq_desc for 24 on node -1
[    0.253267]   alloc kstat_irqs on node -1
[    0.253275] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[    0.253281] pcieport 0000:00:01.0: setting latency timer to 64
[    0.253367]   alloc irq_desc for 25 on node -1
[    0.253369]   alloc kstat_irqs on node -1
[    0.253375] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[    0.253383] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.253488]   alloc irq_desc for 26 on node -1
[    0.253489]   alloc kstat_irqs on node -1
[    0.253496] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[    0.253503] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.253578] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.253654] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.253747] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.253751] ACPI: Power Button [PWRB]
[    0.253790] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.253792] ACPI: Power Button [PWRF]
[    0.254295] ACPI: SSDT cffae0c0 001D2 (v01    AMI   CPU1PM 00000001 INTL 20060113)
[    0.254551] processor LNXCPU:00: registered as cooling_device0
[    0.254812] ACPI: SSDT cffae2a0 00143 (v01    AMI   CPU2PM 00000001 INTL 20060113)
[    0.255174] processor LNXCPU:01: registered as cooling_device1
[    0.258461] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.258551] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.258977] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.259984] brd: module loaded
[    0.260399] loop: module loaded
[    0.260474] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.260575] ata_piix 0000:00:1f.1: version 2.13
[    0.260589]   alloc irq_desc for 22 on node -1
[    0.260591]   alloc kstat_irqs on node -1
[    0.260596] ata_piix 0000:00:1f.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    0.260633] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.260699] scsi0 : ata_piix
[    0.260757] scsi1 : ata_piix
[    0.261903] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    0.261906] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    0.261924]   alloc irq_desc for 23 on node -1
[    0.261926]   alloc kstat_irqs on node -1
[    0.261930] ata_piix 0000:00:1f.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[    0.261934] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.261962] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.262001] scsi2 : ata_piix
[    0.262045] scsi3 : ata_piix
[    0.263256] ata3: SATA max UDMA/133 cmd 0xa800 ctl 0xa400 bmdma 0x9400 irq 23
[    0.263258] ata4: SATA max UDMA/133 cmd 0xa000 ctl 0x9800 bmdma 0x9408 irq 23
[    0.263554] Fixed MDIO Bus: probed
[    0.263586] PPP generic driver version 2.4.2
[    0.263622] tun: Universal TUN/TAP device driver, 1.6
[    0.263624] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.263708] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.263724]   alloc irq_desc for 20 on node -1
[    0.263726]   alloc kstat_irqs on node -1
[    0.263730] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.263741] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.263744] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.263781] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.263797] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.263806] ehci_hcd 0000:00:1d.7: debug port 1
[    0.267687] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.267699] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd5dffc00
[    0.271822] isapnp: Scanning for PnP cards...
[    0.279775] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.279864] usb usb1: configuration #1 chosen from 1 choice
[    0.279890] hub 1-0:1.0: USB hub found
[    0.279899] hub 1-0:1.0: 8 ports detected
[    0.279957] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.279971] uhci_hcd: USB Universal Host Controller Interface driver
[    0.280005] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.280011] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.280014] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.280045] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.280067] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00008000
[    0.280142] usb usb2: configuration #1 chosen from 1 choice
[    0.280168] hub 2-0:1.0: USB hub found
[    0.280175] hub 2-0:1.0: 2 ports detected
[    0.280214] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.280219] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.280222] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.280255] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.280283] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00008400
[    0.280356] usb usb3: configuration #1 chosen from 1 choice
[    0.280378] hub 3-0:1.0: USB hub found
[    0.280383] hub 3-0:1.0: 2 ports detected
[    0.280421]   alloc irq_desc for 18 on node -1
[    0.280423]   alloc kstat_irqs on node -1
[    0.280427] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.280432] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.280434] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.280460] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.280487] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008800
[    0.280561] usb usb4: configuration #1 chosen from 1 choice
[    0.280583] hub 4-0:1.0: USB hub found
[    0.280588] hub 4-0:1.0: 2 ports detected
[    0.280626]   alloc irq_desc for 19 on node -1
[    0.280627]   alloc kstat_irqs on node -1
[    0.280631] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.280636] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.280639] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.280665] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.280691] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00009000
[    0.280763] usb usb5: configuration #1 chosen from 1 choice
[    0.280784] hub 5-0:1.0: USB hub found
[    0.280789] hub 5-0:1.0: 2 ports detected
[    0.280881] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.283155] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.283161] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.291837] mice: PS/2 mouse device common for all mice
[    0.291949] rtc_cmos 00:03: RTC can wake from S4
[    0.291984] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.292007] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[    0.292104] device-mapper: uevent: version 1.0.3
[    0.309684] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.325810] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.339898] Freeing initrd memory: 7736k freed
[    0.342837] device-mapper: multipath: version 1.1.0 loaded
[    0.342842] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.343009] EISA: Probing bus 0 at eisa.0
[    0.343036] Cannot allocate resource for EISA slot 8
[    0.343037] EISA: Detected 0 cards.
[    0.343103] cpuidle: using governor ladder
[    0.343105] cpuidle: using governor menu
[    0.343533] TCP cubic registered
[    0.343683] NET: Registered protocol family 10
[    0.344110] lo: Disabled Privacy Extensions
[    0.344406] NET: Registered protocol family 17
[    0.344803] Using IPI No-Shortcut mode
[    0.344888] PM: Resume from disk failed.
[    0.344904] registered taskstats version 1
[    0.345200]   Magic number: 10:418:531
[    0.345277] rtc_cmos 00:03: setting system clock to 2010-05-09 12:30:50 UTC (1273408250)
[    0.345280] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.345281] EDD information not available.
[    0.500131] ata1.00: ATAPI: PLEXTOR DVDR   PX-760A, 1.00, max UDMA/66
[    0.515875] ata1.00: configured for UDMA/66
[    0.532892] ata3.00: ATA-7: ST3320620AS, 3.AAC, max UDMA/133
[    0.532894] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.541312] ata4.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
[    0.541315] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.599549] ata3.00: configured for UDMA/133
[    0.607972] ata4.00: configured for UDMA/133
[    0.615683] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    0.630008] isapnp: No Plug & Play device found
[    0.630772] scsi 0:0:0:0: CD-ROM            PLEXTOR  DVDR   PX-760A   1.00 PQ: 0 ANSI: 5
[    0.632924] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[    0.632928] Uniform CD-ROM driver Revision: 3.20
[    0.633036] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    0.633094] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    0.633233] scsi 2:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
[    0.633329] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    0.633334] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    0.633373] sd 2:0:0:0: [sda] Write Protect is off
[    0.633376] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.633398] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.633427] scsi 3:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
[    0.633516] sd 3:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    0.633522] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    0.633558] sd 3:0:0:0: [sdb] Write Protect is off
[    0.633560] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    0.633581] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.633699]  sdb:
[    0.633779]  sda: sda1 sda2 sda3 < sdb1 sdb2 sdb3 < sda5 >
[    0.666662] sd 2:0:0:0: [sda] Attached SCSI disk
[    0.670854]  sdb5 > sdb4
[    0.686544] sd 3:0:0:0: [sdb] Attached SCSI disk
[    0.686558] Freeing unused kernel memory: 672k freed
[    0.686873] Write protecting the kernel text: 4828k
[    0.686943] Write protecting the kernel read-only data: 1876k
[    0.700880] udev: starting version 151
[    0.746906] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.746925] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.746966] r8169 0000:02:00.0: setting latency timer to 64
[    0.747017]   alloc irq_desc for 27 on node -1
[    0.747019]   alloc kstat_irqs on node -1
[    0.747032] r8169 0000:02:00.0: irq 27 for MSI/MSI-X
[    0.747595] eth0: RTL8168c/8111c at 0xf8240000, 00:1e:8c:9b:d9:8d, XID 1c2000c0 IRQ 27
[    0.749235] usb 1-1: configuration #1 chosen from 1 choice
[    0.801452] Initializing USB Mass Storage driver...
[    0.801807] scsi4 : SCSI emulation for USB Mass Storage devices
[    0.802875] usb-storage: device found at 2
[    0.802877] usb-storage: waiting for device to settle before scanning
[    0.802887] usbcore: registered new interface driver usb-storage
[    0.802890] USB Mass Storage support registered.
[    0.860747] usb 1-3: new high speed USB device using ehci_hcd and address 3
[    1.007904] usb 1-3: configuration #1 chosen from 1 choice
[    1.096103] EXT4-fs (sda2): mounted filesystem with ordered data mode
[    1.412033] usb 3-2: new low speed USB device using uhci_hcd and address 2
[    1.588487] usb 3-2: configuration #1 chosen from 1 choice
[    1.828074] usb 5-1: new full speed USB device using uhci_hcd and address 2
[    2.016938] usb 5-1: configuration #1 chosen from 1 choice
[    5.796495] usb-storage: device scan complete
[    5.796997] scsi 4:0:0:0: Direct-Access     WD       6400AAV External 1.75 PQ: 0 ANSI: 4
[    5.797443] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    5.797974] sd 4:0:0:0: [sdc] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[    5.798470] sd 4:0:0:0: [sdc] Write Protect is off
[    5.798474] sd 4:0:0:0: [sdc] Mode Sense: 23 00 00 00
[    5.798477] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[    5.799597] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[    5.799601]  sdc: sdc1
[    5.809845] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[    5.809850] sd 4:0:0:0: [sdc] Attached SCSI disk
[   19.190565] udev: starting version 151
[   19.191283] Adding 3036244k swap on /dev/sda5.  Priority:-1 extents:1 across:3036244k 
[   19.206598] Adding 1735012k swap on /dev/sdb4.  Priority:-2 extents:1 across:1735012k 
[   19.232258] lp: driver loaded but no devices found
[   19.260935] vga16fb: initializing
[   19.260938] vga16fb: mapped to 0xc00a0000
[   19.260985] fb0: VGA16 VGA frame buffer device
[   19.280939] Linux agpgart interface v0.103
[   19.309852] Adding 3036244k swap on /dev/sdb5.  Priority:-3 extents:1 across:3036244k 
[   19.335175] Linux video capture interface: v2.00
[   19.367224] intel_rng: FWH not detected
[   19.392465] parport_pc 00:06: reported by Plug and Play ACPI
[   19.392571] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   19.444534] nvidia: module license 'NVIDIA' taints kernel.
[   19.444537] Disabling lock debugging due to kernel taint
[   19.460660] psmouse serio1: ID: 10 00 64
[   19.488153] lp0: using parport0 (interrupt-driven).
[   19.494158] type=1505 audit(1273401069.646:2):  operation="profile_load" pid=634 name="/sbin/dhclient3"
[   19.494732] type=1505 audit(1273401069.646:3):  operation="profile_load" pid=634 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   19.495055] type=1505 audit(1273401069.646:4):  operation="profile_load" pid=634 name="/usr/lib/connman/scripts/dhclient-script"
[   19.519628] logips2pp: Detected unknown logitech mouse model 127
[   20.018872] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[   20.077645] r8169: eth0: link down
[   20.077806] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.139612] ivtv: Start initialization, version 1.4.1
[   20.139660] ivtv0: Initializing card 0
[   20.139662] ivtv0: Autodetected Hauppauge card (cx23415 based)
[   20.144069]   alloc irq_desc for 21 on node -1
[   20.144072]   alloc kstat_irqs on node -1
[   20.144078] ivtv 0000:01:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[   20.198470] tveeprom 0-0050: Hauppauge model 48139, rev K2B7, serial# 8889298
[   20.198473] tveeprom 0-0050: tuner model is Philips FM1216ME MK5 (idx 117, type 38)
[   20.198476] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
[   20.198478] tveeprom 0-0050: audio processor is MSP4418 (idx 25)
[   20.198480] tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
[   20.198482] tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter
[   20.198484] ivtv0: Autodetected Hauppauge WinTV PVR-350
[   20.372182] nvidia 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   20.372189] nvidia 0000:04:00.0: setting latency timer to 64
[   20.372193] vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   20.372687] NVRM: loading NVIDIA UNIX x86 Kernel Module  195.36.15  Thu Mar 11 21:41:46 PST 2010
[   20.382910] ppdev: user-space parallel port driver
[   20.408140] usbcore: registered new interface driver hiddev
[   20.419817] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
[   20.424766] input: Logitech WingMan Precision USB as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input5
[   20.424824] generic-usb 0003:046D:C20C.0001: input,hidraw0: USB HID v1.10 Joystick [Logitech WingMan Precision USB] on usb-0000:00:1d.1-2/input0
[   20.424846] usbcore: registered new interface driver usbhid
[   20.424848] usbhid: v2.6:USB HID core driver
[   20.464511] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x8204
[   20.464529] usbcore: registered new interface driver usblp
[   20.577320] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   20.577341] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   20.581165] Console: switching to colour frame buffer device 80x30
[   20.586566] saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
[   20.632057] msp3400 0-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0)
[   20.632060] msp3400 0-0040: msp3400 supports nicam and radio, mode is autodetect and autoselect
[   20.649422] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[   20.653131] tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
[   20.679221] tda9887 0-0043: creating new instance
[   20.679224] tda9887 0-0043: tda988[5/6/7] found
[   20.683538] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
[   20.705792] tuner-simple 0-0061: creating new instance
[   20.705796] tuner-simple 0-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
[   20.719184] IRQ 21/ivtv0: IRQF_DISABLED is not guaranteed on shared IRQs
[   20.719557] ivtv0: Registered device video0 for encoder MPG (4096 kB)
[   20.719643] ivtv0: Registered device video32 for encoder YUV (2048 kB)
[   20.719717] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
[   20.719794] ivtv0: Registered device video24 for encoder PCM (320 kB)
[   20.719868] ivtv0: Registered device radio0 for encoder radio
[   20.719942] ivtv0: Registered device video16 for decoder MPG (1024 kB)
[   20.720016] ivtv0: Registered device vbi8 for decoder VBI (64 kB)
[   20.720092] ivtv0: Registered device vbi16 for decoder VOUT
[   20.720165] ivtv0: Registered device video48 for decoder YUV (1024 kB)
[   20.720168] ivtv0: Initialized card: Hauppauge WinTV PVR-350
[   20.720201] CA0106 0000:01:02.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   20.720224] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102
[   20.721556] ivtv: End initialization
[   21.190908] eth1: register 'asix' at usb-0000:00:1d.7-3, ASIX AX88772 USB 2.0 Ethernet, 00:30:4f:43:83:a7
[   21.190940] usbcore: registered new interface driver asix
[   21.204760] eth1: link down
[   21.206346] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   21.348511] ivtv 0000:01:01.0: firmware: requesting v4l-cx2341x-enc.fw
[   21.403058] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
[   21.404039] ivtv 0000:01:01.0: firmware: requesting v4l-cx2341x-dec.fw
[   21.418306] ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
[   21.616903] ivtv0: Encoder revision: 0x02060039
[   21.617046] ivtv0: Decoder revision: 0x02020023
[   21.656832] ivtv 0000:01:01.0: firmware: requesting v4l-cx2341x-init.mpg
[   21.699984] ivtv0: Loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
[   23.186180] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   23.190122] eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
[   33.588009] eth1: no IPv6 routers present
[  157.533529] EXT4-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
[  157.575926] EXT4-fs (sdc1): mounted filesystem with ordered data mode
[  217.474349] usb 1-1: USB disconnect, address 2
[  229.652119] usb 1-1: new high speed USB device using ehci_hcd and address 6
[  229.785209] usb 1-1: configuration #1 chosen from 1 choice
[  229.786422] scsi5 : SCSI emulation for USB Mass Storage devices
[  229.786519] usb-storage: device found at 6
[  229.786521] usb-storage: waiting for device to settle before scanning
[  234.784195] usb-storage: device scan complete
[  234.784803] scsi 5:0:0:0: Direct-Access     WD       6400AAV External 1.75 PQ: 0 ANSI: 4
[  234.785269] sd 5:0:0:0: Attached scsi generic sg3 type 0
[  234.788460] sd 5:0:0:0: [sdc] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[  234.788895] sd 5:0:0:0: [sdc] Write Protect is off
[  234.788897] sd 5:0:0:0: [sdc] Mode Sense: 23 00 00 00
[  234.788900] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[  234.790025] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[  234.790031]  sdc: sdc1
[  234.796393] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[  234.796397] sd 5:0:0:0: [sdc] Attached SCSI disk
[  235.045523] EXT4-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
[  235.087901] EXT4-fs (sdc1): mounted filesystem with ordered data mode
[  260.494502] usb 1-1: USB disconnect, address 6
[  274.812086] usb 1-1: new high speed USB device using ehci_hcd and address 7
[  274.945187] usb 1-1: configuration #1 chosen from 1 choice
[  274.946420] scsi6 : SCSI emulation for USB Mass Storage devices
[  274.946518] usb-storage: device found at 7
[  274.946519] usb-storage: waiting for device to settle before scanning
[  279.944298] usb-storage: device scan complete
[  279.944905] scsi 6:0:0:0: Direct-Access     WD       6400AAV External 1.75 PQ: 0 ANSI: 4
[  279.945375] sd 6:0:0:0: Attached scsi generic sg3 type 0
[  279.947487] sd 6:0:0:0: [sdc] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[  279.948000] sd 6:0:0:0: [sdc] Write Protect is off
[  279.948003] sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00
[  279.948005] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[  279.949657] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[  279.949662]  sdc: sdc1
[  279.963119] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[  279.963123] sd 6:0:0:0: [sdc] Attached SCSI disk
[  280.212234] EXT4-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
[  280.254721] EXT4-fs (sdc1): mounted filesystem with ordered data mode
[  332.548554] usb 1-1: USB disconnect, address 7
[  344.708148] usb 1-1: new high speed USB device using ehci_hcd and address 8
[  344.841285] usb 1-1: configuration #1 chosen from 1 choice
[  344.842483] scsi7 : SCSI emulation for USB Mass Storage devices
[  344.842580] usb-storage: device found at 8
[  344.842582] usb-storage: waiting for device to settle before scanning
[  349.840884] usb-storage: device scan complete
[  349.841499] scsi 7:0:0:0: Direct-Access     WD       6400AAV External 1.75 PQ: 0 ANSI: 4
[  349.841993] sd 7:0:0:0: Attached scsi generic sg3 type 0
[  349.844588] sd 7:0:0:0: [sdc] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[  349.845158] sd 7:0:0:0: [sdc] Write Protect is off
[  349.845161] sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00
[  349.845164] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[  349.846608] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[  349.846614]  sdc: sdc1
[  349.851849] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[  349.851853] sd 7:0:0:0: [sdc] Attached SCSI disk
[  350.101502] EXT4-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
[  350.144051] EXT4-fs (sdc1): mounted filesystem with ordered data mode
[  423.252971] usb 1-1: USB disconnect, address 8
[  435.468161] usb 1-1: new high speed USB device using ehci_hcd and address 9
[  435.601197] usb 1-1: configuration #1 chosen from 1 choice
[  435.602439] scsi8 : SCSI emulation for USB Mass Storage devices
[  435.602536] usb-storage: device found at 9
[  435.602538] usb-storage: waiting for device to settle before scanning
[  440.600422] usb-storage: device scan complete
[  440.601039] scsi 8:0:0:0: Direct-Access     WD       6400AAV External 1.75 PQ: 0 ANSI: 4
[  440.601513] sd 8:0:0:0: Attached scsi generic sg3 type 0
[  440.602139] sd 8:0:0:0: [sdc] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[  440.603141] sd 8:0:0:0: [sdc] Write Protect is off
[  440.603145] sd 8:0:0:0: [sdc] Mode Sense: 23 00 00 00
[  440.603147] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[  440.604488] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[  440.604492]  sdc: sdc1
[  440.614135] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[  440.614139] sd 8:0:0:0: [sdc] Attached SCSI disk
[  440.863370] EXT4-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
[  440.905628] EXT4-fs (sdc1): mounted filesystem with ordered data mode
[12385.735238] type=1505 audit(1273413435.887:5):  operation="profile_load" pid=5688 name="/usr/lib/cups/backend/cups-pdf"
[12385.736022] type=1505 audit(1273413435.887:6):  operation="profile_load" pid=5688 name="/usr/sbin/cupsd"
[12387.560156] usb 5-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[12418.192789] usblp0: removed