[ 0.000000] microcode: microcode updated early to revision 0x2f, date = 2019-02-17 [ 0.000000] Linux version 5.3.0-18-generic (buildd@lcy01-amd64-027) (gcc version 9.2.1 20190909 (Ubuntu 9.2.1-8ubuntu1)) #19-Ubuntu SMP Tue Oct 8 20:14:06 UTC 2019 (Ubuntu 5.3.0-18.19-generic 5.3.1) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-18-generic root=UUID=fb8ccf3e-9970-4066-bae2-26fe4387c122 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x00000000000bffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x0000000082324fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000082325000-0x0000000082526fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000082527000-0x00000000d41fefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d41ff000-0x00000000d6eeefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d6eef000-0x00000000d6f9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000d6f9f000-0x00000000d6ffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000d6fff000-0x00000000d6ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d7000000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f5fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000041f600000-0x000000041f7fffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x8fac1018-0x8fad1057] usable ==> usable [ 0.000000] e820: update [mem 0x8fac1018-0x8fad1057] usable ==> usable [ 0.000000] e820: update [mem 0x8fab4018-0x8fac0857] usable ==> usable [ 0.000000] e820: update [mem 0x8fab4018-0x8fac0857] usable ==> usable [ 0.000000] e820: update [mem 0x8faa9018-0x8fab3857] usable ==> usable [ 0.000000] e820: update [mem 0x8faa9018-0x8fab3857] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009cfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009d000-0x00000000000bffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000040200000-0x0000000082324fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000082325000-0x0000000082526fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000082527000-0x000000008faa9017] usable [ 0.000000] reserve setup_data: [mem 0x000000008faa9018-0x000000008fab3857] usable [ 0.000000] reserve setup_data: [mem 0x000000008fab3858-0x000000008fab4017] usable [ 0.000000] reserve setup_data: [mem 0x000000008fab4018-0x000000008fac0857] usable [ 0.000000] reserve setup_data: [mem 0x000000008fac0858-0x000000008fac1017] usable [ 0.000000] reserve setup_data: [mem 0x000000008fac1018-0x000000008fad1057] usable [ 0.000000] reserve setup_data: [mem 0x000000008fad1058-0x00000000d41fefff] usable [ 0.000000] reserve setup_data: [mem 0x00000000d41ff000-0x00000000d6eeefff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000d6eef000-0x00000000d6f9efff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000d6f9f000-0x00000000d6ffefff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000d6fff000-0x00000000d6ffffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000d7000000-0x00000000df9fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000041f5fffff] usable [ 0.000000] reserve setup_data: [mem 0x000000041f600000-0x000000041f7fffff] reserved [ 0.000000] efi: EFI v2.31 by Phoenix Technologies Ltd. [ 0.000000] efi: ACPI=0xd6ffe000 ACPI 2.0=0xd6ffe014 SMBIOS=0xd6e8a000 [ 0.000000] secureboot: Secure boot enabled [ 0.000000] Kernel is locked down from EFI secure boot; see man kernel_lockdown.7 [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Acer Aspire V5-571/Aspire V5-571, BIOS V2.15 12/21/2012 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1496.659 MHz processor [ 0.000281] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000284] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000296] last_pfn = 0x41f600 max_arch_pfn = 0x400000000 [ 0.000302] MTRR default type: uncachable [ 0.000304] MTRR fixed ranges enabled: [ 0.000306] 00000-9FFFF write-back [ 0.000307] A0000-FFFFF uncachable [ 0.000308] MTRR variable ranges enabled: [ 0.000311] 0 base 0FF800000 mask FFF800000 write-protect [ 0.000313] 1 base 000000000 mask F80000000 write-back [ 0.000314] 2 base 080000000 mask FC0000000 write-back [ 0.000315] 3 base 0C0000000 mask FE0000000 write-back [ 0.000317] 4 base 0D8000000 mask FF8000000 uncachable [ 0.000318] 5 base 0D7000000 mask FFF000000 uncachable [ 0.000320] 6 base 100000000 mask F00000000 write-back [ 0.000321] 7 base 200000000 mask E00000000 write-back [ 0.000322] 8 base 400000000 mask FE0000000 write-back [ 0.000324] 9 base 41F800000 mask FFF800000 uncachable [ 0.001660] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001894] last_pfn = 0xd7000 max_arch_pfn = 0x400000000 [ 0.026513] check: Scanning 1 areas for low memory corruption [ 0.026518] reserving inaccessible SNB gfx pages [ 0.026527] BRK [0x28601000, 0x28601fff] PGTABLE [ 0.026529] BRK [0x28602000, 0x28602fff] PGTABLE [ 0.026531] BRK [0x28603000, 0x28603fff] PGTABLE [ 0.026621] BRK [0x28604000, 0x28604fff] PGTABLE [ 0.026623] BRK [0x28605000, 0x28605fff] PGTABLE [ 0.026839] BRK [0x28606000, 0x28606fff] PGTABLE [ 0.027127] BRK [0x28607000, 0x28607fff] PGTABLE [ 0.027152] BRK [0x28608000, 0x28608fff] PGTABLE [ 0.027237] BRK [0x28609000, 0x28609fff] PGTABLE [ 0.027370] BRK [0x2860a000, 0x2860afff] PGTABLE [ 0.027481] BRK [0x2860b000, 0x2860bfff] PGTABLE [ 0.027600] BRK [0x2860c000, 0x2860cfff] PGTABLE [ 0.028206] RAMDISK: [mem 0x3d2e6000-0x3fffdfff] [ 0.028217] ACPI: Early table checksum verification disabled [ 0.028222] ACPI: RSDP 0x00000000D6FFE014 000024 (v02 ACRSYS) [ 0.028228] ACPI: XSDT 0x00000000D6FFE170 0000AC (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001) [ 0.028238] ACPI: FACP 0x00000000D6FEC000 00010C (v05 ACRSYS ACRPRDCT 00000001 ANNI 00000001) [ 0.028247] ACPI: DSDT 0x00000000D6FEF000 00C3EE (v02 ACRSYS IVB-CPT 00000000 INTL 20061109) [ 0.028253] ACPI: FACS 0x00000000D6F7C000 000040 [ 0.028257] ACPI: SLIC 0x00000000D6FFD000 000176 (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001) [ 0.028262] ACPI: SSDT 0x00000000D6FFC000 0001F9 (v01 ACRSYS PtidDevc 00001000 INTL 20061109) [ 0.028267] ACPI: ASF! 0x00000000D6FEE000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 ANNI 00000001) [ 0.028272] ACPI: HPET 0x00000000D6FEB000 000038 (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001) [ 0.028277] ACPI: APIC 0x00000000D6FEA000 000098 (v03 ACRSYS ACRPRDCT 00000001 ANNI 00000001) [ 0.028282] ACPI: MCFG 0x00000000D6FE9000 00003C (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001) [ 0.028287] ACPI: WPBT 0x00000000D6FDA000 000046 (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001) [ 0.028291] ACPI: FPDT 0x00000000D6FD9000 000064 (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001) [ 0.028296] ACPI: SSDT 0x00000000D6FD8000 00079A (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.028301] ACPI: SSDT 0x00000000D6FD7000 000B22 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.028306] ACPI: UEFI 0x00000000D6FD6000 00003E (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001) [ 0.028311] ACPI: UEFI 0x00000000D6FD5000 000042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.028316] ACPI: MSDM 0x00000000D6F79000 000055 (v03 ACRSYS ACRPRDCT 00000001 ANNI 00000001) [ 0.028321] ACPI: UEFI 0x00000000D6FD4000 00026A (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001) [ 0.028326] ACPI: BGRT 0x00000000D6FD3000 000038 (v00 ACRSYS ACRPRDCT 00000001 ANNI 00000001) [ 0.028331] ACPI: DBG2 0x00000000D6FD2000 0000B4 (v00 ACRSYS ACRPRDCT 00000001 ANNI 00000001) [ 0.028344] ACPI: Local APIC address 0xfee00000 [ 0.028477] No NUMA configuration found [ 0.028478] Faking a node at [mem 0x0000000000000000-0x000000041f5fffff] [ 0.028496] NODE_DATA(0) allocated [mem 0x41f5c9000-0x41f5f3fff] [ 0.029003] Zone ranges: [ 0.029005] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.029007] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.029008] Normal [mem 0x0000000100000000-0x000000041f5fffff] [ 0.029010] Device empty [ 0.029011] Movable zone start for each node [ 0.029016] Early memory node ranges [ 0.029018] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.029019] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.029021] node 0: [mem 0x0000000020200000-0x000000003fffffff] [ 0.029022] node 0: [mem 0x0000000040200000-0x0000000082324fff] [ 0.029023] node 0: [mem 0x0000000082527000-0x00000000d41fefff] [ 0.029024] node 0: [mem 0x00000000d6fff000-0x00000000d6ffffff] [ 0.029025] node 0: [mem 0x0000000100000000-0x000000041f5fffff] [ 0.029301] Zeroed struct page in unavailable ranges: 17510 pages [ 0.029303] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f5fffff] [ 0.029305] On node 0 totalpages: 4141466 [ 0.029307] DMA zone: 64 pages used for memmap [ 0.029308] DMA zone: 156 pages reserved [ 0.029309] DMA zone: 3996 pages, LIFO batch:0 [ 0.029407] DMA32 zone: 13488 pages used for memmap [ 0.029409] DMA32 zone: 863230 pages, LIFO batch:63 [ 0.050170] Normal zone: 51160 pages used for memmap [ 0.050172] Normal zone: 3274240 pages, LIFO batch:63 [ 0.120809] Reserving Intel graphics memory at [mem 0xd7a00000-0xdf9fffff] [ 0.120918] ACPI: PM-Timer IO Port: 0x408 [ 0.120922] ACPI: Local APIC address 0xfee00000 [ 0.120934] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.120936] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.120950] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.120953] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.120955] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.120957] ACPI: IRQ0 used by override. [ 0.120959] ACPI: IRQ9 used by override. [ 0.120962] Using ACPI (MADT) for SMP configuration information [ 0.120965] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.120987] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.121027] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.121030] PM: Registered nosave memory: [mem 0x0009d000-0x000bffff] [ 0.121031] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff] [ 0.121034] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.121037] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] [ 0.121039] PM: Registered nosave memory: [mem 0x82325000-0x82526fff] [ 0.121042] PM: Registered nosave memory: [mem 0x8faa9000-0x8faa9fff] [ 0.121045] PM: Registered nosave memory: [mem 0x8fab3000-0x8fab3fff] [ 0.121046] PM: Registered nosave memory: [mem 0x8fab4000-0x8fab4fff] [ 0.121049] PM: Registered nosave memory: [mem 0x8fac0000-0x8fac0fff] [ 0.121050] PM: Registered nosave memory: [mem 0x8fac1000-0x8fac1fff] [ 0.121053] PM: Registered nosave memory: [mem 0x8fad1000-0x8fad1fff] [ 0.121057] PM: Registered nosave memory: [mem 0xd41ff000-0xd6eeefff] [ 0.121058] PM: Registered nosave memory: [mem 0xd6eef000-0xd6f9efff] [ 0.121058] PM: Registered nosave memory: [mem 0xd6f9f000-0xd6ffefff] [ 0.121062] PM: Registered nosave memory: [mem 0xd7000000-0xdf9fffff] [ 0.121063] PM: Registered nosave memory: [mem 0xdfa00000-0xf80f7fff] [ 0.121064] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff] [ 0.121065] PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff] [ 0.121066] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.121067] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff] [ 0.121069] [mem 0xdfa00000-0xf80f7fff] available for PCI devices [ 0.121071] Booting paravirtualized kernel on bare hardware [ 0.121075] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.121087] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.121449] percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u262144 [ 0.121463] pcpu-alloc: s188416 r8192 d28672 u262144 alloc=1*2097152 [ 0.121465] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.121525] Built 1 zonelists, mobility grouping on. Total pages: 4076598 [ 0.121526] Policy zone: Normal [ 0.121528] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-18-generic root=UUID=fb8ccf3e-9970-4066-bae2-26fe4387c122 ro quiet splash vt.handoff=7 [ 0.123173] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.123954] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.124112] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.130011] Calgary: detecting Calgary via BIOS EBDA area [ 0.130013] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.190742] Memory: 16066904K/16565864K available (14339K kernel code, 2388K rwdata, 4728K rodata, 2668K init, 5056K bss, 498960K reserved, 0K cma-reserved) [ 0.190752] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0 [ 0.190985] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.191005] Kernel/User page tables isolation: enabled [ 0.191028] ftrace: allocating 43189 entries in 169 pages [ 0.219165] rcu: Hierarchical RCU implementation. [ 0.219168] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.219169] Tasks RCU enabled. [ 0.219170] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.219172] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.225268] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.225571] vt handoff: transparent VT on vt#7 [ 0.225580] Console: colour dummy device 80x25 [ 0.225587] printk: console [tty0] enabled [ 0.225612] ACPI: Core revision 20190703 [ 0.225838] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.225857] APIC: Switch to symmetric I/O mode setup [ 0.225931] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.226392] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.245857] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1592ce80312, max_idle_ns: 440795257055 ns [ 0.245863] Calibrating delay loop (skipped), value calculated using timer frequency.. 2993.31 BogoMIPS (lpj=5986636) [ 0.245866] pid_max: default: 32768 minimum: 301 [ 0.254577] LSM: Security Framework initializing [ 0.254596] Yama: becoming mindful. [ 0.254664] AppArmor: AppArmor initialized [ 0.254757] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.254794] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.255065] *** VALIDATE proc *** [ 0.255151] *** VALIDATE cgroup1 *** [ 0.255153] *** VALIDATE cgroup2 *** [ 0.255230] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.255246] process: using mwait in idle threads [ 0.255250] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.255251] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.255256] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.255258] Spectre V2 : Mitigation: Full generic retpoline [ 0.255259] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.255260] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.255262] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.255263] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.255265] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.255270] MDS: Mitigation: Clear CPU buffers [ 0.255515] Freeing SMP alternatives memory: 36K [ 0.259110] TSC deadline timer enabled [ 0.259114] smpboot: CPU0: Intel(R) Core(TM) i3-2375M CPU @ 1.50GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.259285] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.259295] ... version: 3 [ 0.259296] ... bit width: 48 [ 0.259297] ... generic registers: 4 [ 0.259298] ... value mask: 0000ffffffffffff [ 0.259299] ... max period: 00007fffffffffff [ 0.259300] ... fixed-purpose events: 3 [ 0.259301] ... event mask: 000000070000000f [ 0.259362] rcu: Hierarchical SRCU implementation. [ 0.260999] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.261150] smp: Bringing up secondary CPUs ... [ 0.261323] x86: Booting SMP configuration: [ 0.261325] .... node #0, CPUs: #1 [ 0.262010] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.262117] #2 #3 [ 0.268542] smp: Brought up 1 node, 4 CPUs [ 0.268542] smpboot: Max logical packages: 2 [ 0.268542] smpboot: Total of 4 processors activated (11973.27 BogoMIPS) [ 0.270532] devtmpfs: initialized [ 0.270532] x86/mm: Memory block size: 128MB [ 0.272772] PM: Registering ACPI NVS region [mem 0xd6eef000-0xd6f9efff] (720896 bytes) [ 0.272772] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.273885] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.273957] pinctrl core: initialized pinctrl subsystem [ 0.274112] PM: RTC time: 10:32:27, date: 2019-11-05 [ 0.274322] NET: Registered protocol family 16 [ 0.274462] audit: initializing netlink subsys (disabled) [ 0.274473] audit: type=2000 audit(1572949947.048:1): state=initialized audit_enabled=0 res=1 [ 0.274473] EISA bus registered [ 0.274473] cpuidle: using governor ladder [ 0.274473] cpuidle: using governor menu [ 0.274473] ACPI: bus type PCI registered [ 0.274473] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.274473] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.274473] PCI: not using MMCONFIG [ 0.274473] PCI: Using configuration type 1 for base access [ 0.274473] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.275346] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.278847] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.282033] ACPI: Added _OSI(Module Device) [ 0.282035] ACPI: Added _OSI(Processor Device) [ 0.282036] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.282038] ACPI: Added _OSI(Processor Aggregator Device) [ 0.282040] ACPI: Added _OSI(Linux-Dell-Video) [ 0.282041] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.282043] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.300217] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.302535] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.303571] ACPI: Dynamic OEM Table Load: [ 0.303584] ACPI: SSDT 0xFFFF9DB50CD3F000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.305373] ACPI: Dynamic OEM Table Load: [ 0.305382] ACPI: SSDT 0xFFFF9DB50CD40000 000303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.306539] ACPI: Dynamic OEM Table Load: [ 0.306539] ACPI: SSDT 0xFFFF9DB50CE1CA00 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.308882] ACPI: EC: EC started [ 0.308883] ACPI: EC: interrupt blocked [ 0.318011] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 0.318015] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.318017] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 0.318018] ACPI: Interpreter enabled [ 0.318057] ACPI: (supports S0 S3 S4 S5) [ 0.318059] ACPI: Using IOAPIC for interrupt routing [ 0.318114] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.319151] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.319167] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.319665] ACPI: Enabled 7 GPEs in block 00 to 3F [ 0.333328] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.333338] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.333683] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.334558] PCI host bridge to bus 0000:00 [ 0.334562] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.334564] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.334566] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.334568] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.334570] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.334571] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.334573] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.334575] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.334577] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.334579] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.334581] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.334582] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.334584] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.334586] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.334591] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.334593] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] [ 0.334595] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window] [ 0.334597] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.334613] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.334788] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.334805] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.334814] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.334820] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.334838] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.335030] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.335072] pci 0000:00:14.0: reg 0x10: [mem 0xf0700000-0xf070ffff 64bit] [ 0.335196] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.335358] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.335401] pci 0000:00:16.0: reg 0x10: [mem 0xf0715000-0xf071500f 64bit] [ 0.335528] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.335697] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.335734] pci 0000:00:1a.0: reg 0x10: [mem 0xf071a000-0xf071a3ff] [ 0.335877] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.336036] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.336071] pci 0000:00:1b.0: reg 0x10: [mem 0xf0710000-0xf0713fff 64bit] [ 0.336212] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.336376] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.336544] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.336721] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 [ 0.336889] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.337061] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400 [ 0.337227] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.337409] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.337446] pci 0000:00:1d.0: reg 0x10: [mem 0xf0719000-0xf07193ff] [ 0.337588] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.337749] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100 [ 0.338066] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 0.338105] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f] [ 0.338120] pci 0000:00:1f.2: reg 0x14: [io 0x309c-0x309f] [ 0.338135] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087] [ 0.338149] pci 0000:00:1f.2: reg 0x1c: [io 0x3098-0x309b] [ 0.338164] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.338180] pci 0000:00:1f.2: reg 0x24: [mem 0xf0718000-0xf07187ff] [ 0.338267] pci 0000:00:1f.2: PME# supported from D3hot [ 0.338424] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.338461] pci 0000:00:1f.3: reg 0x10: [mem 0xf0714000-0xf07140ff 64bit] [ 0.338502] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.338765] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.338950] pci 0000:02:00.0: [10ec:5289] type 00 class 0xff0000 [ 0.339087] pci 0000:02:00.0: reg 0x10: [mem 0xf0600000-0xf060ffff] [ 0.339811] pci 0000:02:00.0: supports D1 D2 [ 0.339813] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.340223] pci 0000:02:00.2: [10ec:8168] type 00 class 0x020000 [ 0.340354] pci 0000:02:00.2: reg 0x10: [io 0x2000-0x20ff] [ 0.340487] pci 0000:02:00.2: reg 0x18: [mem 0xf0404000-0xf0404fff 64bit pref] [ 0.340569] pci 0000:02:00.2: reg 0x20: [mem 0xf0400000-0xf0403fff 64bit pref] [ 0.341003] pci 0000:02:00.2: supports D1 D2 [ 0.341005] pci 0000:02:00.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.341479] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.341485] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.341491] pci 0000:00:1c.2: bridge window [mem 0xf0600000-0xf06fffff] [ 0.341500] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.341636] pci 0000:03:00.0: [168c:0034] type 00 class 0x028000 [ 0.341725] pci 0000:03:00.0: reg 0x10: [mem 0xf0500000-0xf057ffff 64bit] [ 0.341874] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ 0.342073] pci 0000:03:00.0: supports D1 D2 [ 0.342075] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.342300] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.342309] pci 0000:00:1c.3: bridge window [mem 0xf0500000-0xf05fffff] [ 0.343378] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.343518] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.343658] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.343793] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.343927] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.344060] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.344193] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.344326] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.344690] ACPI: EC: interrupt unblocked [ 0.344690] ACPI: EC: event unblocked [ 0.344690] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.344690] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events [ 0.344695] SCSI subsystem initialized [ 0.344695] libata version 3.00 loaded. [ 0.344695] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.344695] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.344695] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.344695] vgaarb: loaded [ 0.344695] ACPI: bus type USB registered [ 0.344695] usbcore: registered new interface driver usbfs [ 0.344695] usbcore: registered new interface driver hub [ 0.344695] usbcore: registered new device driver usb [ 0.344695] pps_core: LinuxPPS API ver. 1 registered [ 0.344695] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.344695] PTP clock support registered [ 0.344695] EDAC MC: Ver: 3.0.0 [ 0.345878] Registered efivars operations [ 0.362093] PCI: Using ACPI for IRQ routing [ 0.363808] PCI: pci_cache_line_size set to 64 bytes [ 0.363889] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] [ 0.363891] e820: reserve RAM buffer [mem 0x82325000-0x83ffffff] [ 0.363893] e820: reserve RAM buffer [mem 0x8faa9018-0x8fffffff] [ 0.363895] e820: reserve RAM buffer [mem 0x8fab4018-0x8fffffff] [ 0.363896] e820: reserve RAM buffer [mem 0x8fac1018-0x8fffffff] [ 0.363898] e820: reserve RAM buffer [mem 0xd41ff000-0xd7ffffff] [ 0.363900] e820: reserve RAM buffer [mem 0xd7000000-0xd7ffffff] [ 0.363901] e820: reserve RAM buffer [mem 0x41f600000-0x41fffffff] [ 0.364090] NetLabel: Initializing [ 0.364092] NetLabel: domain hash size = 128 [ 0.364093] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.364118] NetLabel: unlabeled traffic allowed by default [ 0.365904] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.365911] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.367948] clocksource: Switched to clocksource tsc-early [ 0.387237] VFS: Disk quotas dquot_6.6.0 [ 0.387267] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.387319] *** VALIDATE hugetlbfs *** [ 0.387460] AppArmor: AppArmor Filesystem Enabled [ 0.387503] pnp: PnP ACPI init [ 0.387756] system 00:00: [io 0x1000-0x100f] has been reserved [ 0.387759] system 00:00: [io 0xffff] has been reserved [ 0.387761] system 00:00: [io 0xffff] has been reserved [ 0.387764] system 00:00: [io 0x0400-0x0453] has been reserved [ 0.387766] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.387768] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.387772] system 00:00: [mem 0xfe800000-0xfe80ffff] has been reserved [ 0.387781] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.387824] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.387929] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.387936] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.388077] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.388113] pnp 00:04: Plug and Play ACPI device, IDs ETD0504 PNP0f13 (active) [ 0.388365] pnp 00:05: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:03:00.0 BAR 6 [mem 0xffff0000-0xffffffff pref] [ 0.388403] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.388405] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.388408] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.388410] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.388413] system 00:05: [mem 0xf8000000-0xfbffffff] could not be reserved [ 0.388415] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.388420] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.388422] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.388424] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.388427] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.388434] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.389008] system 00:06: [mem 0x20000000-0x201fffff] has been reserved [ 0.389010] system 00:06: [mem 0x40000000-0x401fffff] has been reserved [ 0.389017] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.389064] pnp: PnP ACPI: found 7 devices [ 0.391708] thermal_sys: Registered thermal governor 'fair_share' [ 0.391709] thermal_sys: Registered thermal governor 'bang_bang' [ 0.391710] thermal_sys: Registered thermal governor 'step_wise' [ 0.391711] thermal_sys: Registered thermal governor 'user_space' [ 0.391713] thermal_sys: Registered thermal governor 'power_allocator' [ 0.396219] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.396274] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window [ 0.396285] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.396306] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.396311] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.396319] pci 0000:00:1c.2: bridge window [mem 0xf0600000-0xf06fffff] [ 0.396325] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.396338] pci 0000:03:00.0: BAR 6: assigned [mem 0xf0580000-0xf058ffff pref] [ 0.396340] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.396348] pci 0000:00:1c.3: bridge window [mem 0xf0500000-0xf05fffff] [ 0.396363] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.396365] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.396367] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.396369] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.396371] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.396373] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.396375] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.396377] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.396379] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.396381] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.396383] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.396385] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] [ 0.396387] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] [ 0.396388] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] [ 0.396390] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] [ 0.396392] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window] [ 0.396394] pci_bus 0000:00: resource 20 [mem 0xdfa00000-0xfeafffff window] [ 0.396397] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.396399] pci_bus 0000:02: resource 1 [mem 0xf0600000-0xf06fffff] [ 0.396400] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.396403] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff] [ 0.396581] NET: Registered protocol family 2 [ 0.396812] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.396981] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.397417] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.397595] TCP: Hash tables configured (established 131072 bind 65536) [ 0.397690] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.397784] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.397990] NET: Registered protocol family 1 [ 0.397998] NET: Registered protocol family 44 [ 0.398015] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.398941] PCI: CLS 64 bytes, default 64 [ 0.399018] Trying to unpack rootfs image as initramfs... [ 0.599796] Initramfs unpacking failed: Decoding failed [ 0.607578] Freeing initrd memory: 46176K [ 0.607616] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.607618] software IO TLB: mapped [mem 0xcfefa000-0xd3efa000] (64MB) [ 0.607943] check: Scanning for low memory corruption every 60 seconds [ 0.611178] Initialise system trusted keyrings [ 0.611194] Key type blacklist registered [ 0.611249] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.613608] zbud: loaded [ 0.614249] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.614527] fuse: init (API version 7.31) [ 0.614714] Platform Keyring initialized [ 0.623774] Key type asymmetric registered [ 0.623776] Asymmetric key parser 'x509' registered [ 0.623795] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.623865] io scheduler mq-deadline registered [ 0.625014] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.625120] efifb: probing for efifb [ 0.625151] efifb: framebuffer at 0xe0000000, using 4128k, total 4128k [ 0.625153] efifb: mode is 1366x768x32, linelength=5504, pages=1 [ 0.625154] efifb: scrolling: redraw [ 0.625156] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.625275] Console: switching to colour frame buffer device 170x48 [ 0.625305] fb0: EFI VGA frame buffer device [ 0.625320] intel_idle: MWAIT substates: 0x21120 [ 0.625321] intel_idle: v0.4.1 model 0x2A [ 0.625627] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.625840] ACPI: AC Adapter [ADP1] (on-line) [ 0.625964] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.625985] ACPI: Lid Switch [LID0] [ 0.626038] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.626052] ACPI: Sleep Button [SLPB] [ 0.626104] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.626115] ACPI: Power Button [PWRF] [ 0.628590] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.628592] ACPI: Thermal Zone [TZS0] (38 C) [ 0.629121] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.629123] ACPI: Thermal Zone [TZS1] (29 C) [ 0.629332] battery: ACPI: Battery Slot [BAT0] (battery absent) [ 0.629365] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.632323] Linux agpgart interface v0.103 [ 0.635767] loop: module loaded [ 0.636101] libphy: Fixed MDIO Bus: probed [ 0.636103] tun: Universal TUN/TAP device driver, 1.6 [ 0.636153] PPP generic driver version 2.4.2 [ 0.636221] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.636225] ehci-pci: EHCI PCI platform driver [ 0.636456] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.636465] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.636483] ehci-pci 0000:00:1a.0: debug port 2 [ 0.640401] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.640421] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf071a000 [ 0.653983] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.654087] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 0.654090] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.654092] usb usb1: Product: EHCI Host Controller [ 0.654094] usb usb1: Manufacturer: Linux 5.3.0-18-generic ehci_hcd [ 0.654095] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.654317] hub 1-0:1.0: USB hub found [ 0.654328] hub 1-0:1.0: 2 ports detected [ 0.654806] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.654814] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.654831] ehci-pci 0000:00:1d.0: debug port 2 [ 0.658742] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.658764] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0719000 [ 0.673995] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.674119] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 0.674122] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.674124] usb usb2: Product: EHCI Host Controller [ 0.674126] usb usb2: Manufacturer: Linux 5.3.0-18-generic ehci_hcd [ 0.674128] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.674351] hub 2-0:1.0: USB hub found [ 0.674362] hub 2-0:1.0: 2 ports detected [ 0.674634] ehci-platform: EHCI generic platform driver [ 0.674657] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.674662] ohci-pci: OHCI PCI platform driver [ 0.674676] ohci-platform: OHCI generic platform driver [ 0.674687] uhci_hcd: USB Universal Host Controller Interface driver [ 0.674936] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.674944] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.676019] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930 [ 0.676027] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.676235] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 0.676237] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.676239] usb usb3: Product: xHCI Host Controller [ 0.676241] usb usb3: Manufacturer: Linux 5.3.0-18-generic xhci-hcd [ 0.676243] usb usb3: SerialNumber: 0000:00:14.0 [ 0.676404] hub 3-0:1.0: USB hub found [ 0.676417] hub 3-0:1.0: 4 ports detected [ 0.677128] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.677133] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.677138] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.677193] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03 [ 0.677195] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.677197] usb usb4: Product: xHCI Host Controller [ 0.677199] usb usb4: Manufacturer: Linux 5.3.0-18-generic xhci-hcd [ 0.677201] usb usb4: SerialNumber: 0000:00:14.0 [ 0.677358] hub 4-0:1.0: USB hub found [ 0.677371] hub 4-0:1.0: 4 ports detected [ 0.678151] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.681346] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.681353] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.681534] mousedev: PS/2 mouse device common for all mice [ 0.681766] rtc_cmos 00:01: RTC can wake from S4 [ 0.681954] rtc_cmos 00:01: registered as rtc0 [ 0.681980] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.681991] i2c /dev entries driver [ 0.682055] device-mapper: uevent: version 1.0.3 [ 0.682163] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com [ 0.682193] platform eisa.0: Probing EISA bus 0 [ 0.682196] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.682198] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.682200] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.682201] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.682203] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.682205] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.682207] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.682208] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.682210] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.682212] platform eisa.0: EISA: Detected 0 cards [ 0.682219] intel_pstate: Intel P-state driver initializing [ 0.682531] ledtrig-cpu: registered to indicate activity on CPUs [ 0.682535] EFI Variables Facility v0.08 2004-May-17 [ 0.701520] NET: Registered protocol family 10 [ 0.705673] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.717547] Segment Routing with IPv6 [ 0.717587] NET: Registered protocol family 17 [ 0.717663] Key type dns_resolver registered [ 0.718185] RAS: Correctable Errors collector initialized. [ 0.718243] microcode: sig=0x206a7, pf=0x10, revision=0x2f [ 0.718419] microcode: Microcode Update Driver: v2.2. [ 0.718435] sched_clock: Marking stable (718036122, 375008)->(748314076, -29902946) [ 0.718866] registered taskstats version 1 [ 0.718879] Loading compiled-in X.509 certificates [ 0.722835] Loaded X.509 cert 'Build time autogenerated kernel key: 6b758c7247b0b59075414cb284a623a59c497bcd' [ 0.722892] zswap: loaded using pool lzo/zbud [ 0.737195] Key type big_key registered [ 0.743973] Key type encrypted registered [ 0.743979] AppArmor: AppArmor sha1 policy hashing enabled [ 0.744500] integrity: Loading X.509 certificate: UEFI:db [ 0.744553] integrity: Loaded X.509 cert 'Acer: c4f0474ae6b5e67a509d99132f49a4ec13f7ac68' [ 0.744554] integrity: Loading X.509 certificate: UEFI:db [ 0.744593] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.744594] integrity: Loading X.509 certificate: UEFI:db [ 0.744632] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.745234] Couldn't parse dbx signatures: -74 [ 0.745240] ima: No TPM chip found, activating TPM-bypass! [ 0.745248] ima: Allocated hash algorithm: sha1 [ 0.745258] No architecture policies found [ 0.745272] evm: Initialising EVM extended attributes: [ 0.745273] evm: security.selinux [ 0.745274] evm: security.SMACK64 [ 0.745275] evm: security.SMACK64EXEC [ 0.745276] evm: security.SMACK64TRANSMUTE [ 0.745277] evm: security.SMACK64MMAP [ 0.745278] evm: security.apparmor [ 0.745278] evm: security.ima [ 0.745279] evm: security.capability [ 0.745280] evm: HMAC attrs: 0x1 [ 0.745906] PM: Magic number: 11:941:526 [ 0.746072] rtc_cmos 00:01: setting system clock to 2019-11-05T10:32:28 UTC (1572949948) [ 0.746320] Lockdown: swapper/0: Hibernation is restricted; see man kernel_lockdown.7 [ 0.748920] Freeing unused decrypted memory: 2040K [ 0.749615] Freeing unused kernel image memory: 2668K [ 0.778016] Write protecting the kernel read-only data: 22528k [ 0.778788] Freeing unused kernel image memory: 2008K [ 0.779205] Freeing unused kernel image memory: 1416K [ 0.798504] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.798505] x86/mm: Checking user space page tables [ 0.817325] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.817329] Run /init as init process [ 0.989900] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.005074] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 1.013889] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.013916] usb 3-1: new full-speed USB device number 2 using xhci_hcd [ 1.026687] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190703/utaddress-204) [ 1.026699] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.026704] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190703/utaddress-204) [ 1.026711] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.026713] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190703/utaddress-204) [ 1.026720] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.026722] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190703/utaddress-204) [ 1.026730] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.026731] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 1.027614] r8169 0000:02:00.2: can't disable ASPM; OS doesn't have ASPM control [ 1.031429] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.032845] ahci 0000:00:1f.2: version 3.0 [ 1.036881] libphy: r8169: probed [ 1.037340] r8169 0000:02:00.2 eth0: RTL8411, 20:6a:8a:fb:37:03, XID 488, IRQ 29 [ 1.037345] r8169 0000:02:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.045922] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode [ 1.045929] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 1.059714] scsi host0: ahci [ 1.066045] scsi host1: ahci [ 1.067138] scsi host2: ahci [ 1.067415] scsi host3: ahci [ 1.069941] scsi host4: ahci [ 1.070287] scsi host5: ahci [ 1.070425] ata1: SATA max UDMA/133 abar m2048@0xf0718000 port 0xf0718100 irq 30 [ 1.070428] ata2: DUMMY [ 1.070429] ata3: DUMMY [ 1.070431] ata4: DUMMY [ 1.070434] ata5: SATA max UDMA/133 abar m2048@0xf0718000 port 0xf0718300 irq 30 [ 1.070436] ata6: DUMMY [ 1.089861] r8169 0000:02:00.2 enp2s0f2: renamed from eth0 [ 1.146482] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.146485] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.146922] hub 1-1:1.0: USB hub found [ 1.147131] hub 1-1:1.0: 6 ports detected [ 1.165281] usb 3-1: New USB device found, idVendor=0461, idProduct=4dea, bcdDevice= 4.00 [ 1.165296] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.165298] usb 3-1: Product: Acer Wireless Optical Mouse [ 1.165300] usb 3-1: Manufacturer: reserved [ 1.170327] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.170331] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.170773] hub 2-1:1.0: USB hub found [ 1.170958] hub 2-1:1.0: 8 ports detected [ 1.289970] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.385637] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.385663] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.386984] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA920, max UDMA/133 [ 1.386997] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.388632] ata1.00: configured for UDMA/133 [ 1.389247] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 A920 PQ: 0 ANSI: 5 [ 1.389580] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.389776] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.389780] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.389815] ata5.00: ATAPI: HL-DT-ST DVDRAM GU61N, 1.00, max UDMA/133 [ 1.389820] sd 0:0:0:0: [sda] Write Protect is off [ 1.389824] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.389895] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.391122] ata5.00: configured for UDMA/133 [ 1.397208] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GU61N 1.00 PQ: 0 ANSI: 5 [ 1.429957] usb 1-1.4: new full-speed USB device number 3 using ehci-pci [ 1.443925] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 [ 1.445015] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.471563] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.471566] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.471966] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.472090] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 1.491391] usb 3-4: New USB device found, idVendor=04f2, idProduct=b335, bcdDevice=81.03 [ 1.491394] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.491397] usb 3-4: Product: HD WebCam [ 1.491399] usb 3-4: Manufacturer: SunplusIT INC. [ 1.540562] usb 1-1.4: string descriptor 0 read error: -22 [ 1.540573] usb 1-1.4: New USB device found, idVendor=04ca, idProduct=3006, bcdDevice= 0.01 [ 1.540577] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.569347] hidraw: raw HID events driver (C) Jiri Kosina [ 1.574728] usbcore: registered new interface driver usbhid [ 1.574730] usbhid: USB HID core driver [ 1.578837] input: reserved Acer Wireless Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:0461:4DEA.0001/input/input6 [ 1.579011] input: reserved Acer Wireless Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:0461:4DEA.0001/input/input7 [ 1.579196] hid-generic 0003:0461:4DEA.0001: input,hiddev0,hidraw0: USB HID v1.11 Mouse [reserved Acer Wireless Optical Mouse] on usb-0000:00:14.0-1/input0 [ 1.604290] random: fast init done [ 1.604395] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x461f00) [ 1.615766] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0f. [ 1.627128] psmouse serio1: elantech: Elan sample query result 01, 3a, 75 [ 1.633902] tsc: Refined TSC clocksource calibration: 1496.602 MHz [ 1.633916] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x159298a4d16, max_idle_ns: 440795254665 ns [ 1.633961] clocksource: Switched to clocksource tsc [ 1.643724] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.643741] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.643758] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.688482] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5 [ 3.312274] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 4.559389] random: crng init done [ 4.559393] random: 7 urandom warning(s) missed due to ratelimiting [ 5.056579] systemd[1]: Inserted module 'autofs4' [ 5.274665] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 5.294103] systemd[1]: Detected architecture x86-64. [ 5.301909] systemd[1]: Set hostname to . [ 5.306505] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument [ 5.306658] Lockdown: systemd: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7 [ 5.385140] Lockdown: systemd: BPF is restricted; see man kernel_lockdown.7 [ 7.578662] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 7.578668] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 7.815082] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. [ 8.340087] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.340378] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.340413] systemd[1]: Reached target Remote File Systems. [ 8.603331] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro [ 8.989134] lp: driver loaded but no devices found [ 9.116163] ppdev: user-space parallel port driver [ 9.274959] systemd-journald[324]: Received request to flush runtime journal from PID 1 [ 9.573904] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS [ 11.092571] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 11.092575] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 11.092577] RAPL PMU: hw unit of domain package 2^-16 Joules [ 11.092578] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 11.204500] cryptd: max_cpu_qlen set to 1000 [ 11.247917] acer_wmi: Acer Laptop ACPI-WMI Extras [ 11.247954] acer_wmi: Function bitmap for Communication Button: 0x801 [ 11.251170] input: Acer WMI hotkeys as /devices/virtual/input/input8 [ 13.114485] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 13.130575] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 14.062848] checking generic (e0000000 408000) vs hw (e0000000 10000000) [ 14.062852] fb0: switching to inteldrmfb from EFI VGA [ 14.065642] Console: switching to colour dummy device 80x25 [ 14.067581] i915 0000:00:02.0: vgaarb: deactivate vga console [ 14.069326] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 14.069328] [drm] Driver supports precise vblank timestamp query. [ 14.079121] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 14.096972] [drm] LVDS was detected, not registering eDP [ 14.129292] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0 [ 14.132575] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 14.137107] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9 [ 14.152670] fbcon: i915drmfb (fb0) is primary device [ 14.152819] Console: switching to colour frame buffer device 170x48 [ 14.152872] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 15.353219] intel_rapl_common: Found RAPL domain package [ 15.353222] intel_rapl_common: Found RAPL domain core [ 15.353224] intel_rapl_common: Found RAPL domain uncore [ 15.353232] intel_rapl_common: RAPL package-0 domain package locked by BIOS [ 15.361964] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 15.549451] ath: phy0: ASPM enabled: 0x43 [ 15.549456] ath: EEPROM regdomain: 0x6a [ 15.549458] ath: EEPROM indicates we should expect a direct regpair map [ 15.549462] ath: Country alpha2 being used: 00 [ 15.549464] ath: Regpair used: 0x6a [ 15.555603] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 15.557050] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffadf540900000, irq=19 [ 15.569808] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0 [ 16.023012] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 16.023019] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 16.023024] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 16.023028] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 16.023031] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 16.023035] snd_hda_codec_realtek hdaudioC0D0: Mic=0x1b [ 16.058535] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 16.058682] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 16.913722] intel_pstate: Turbo disabled by BIOS or unavailable on processor [ 16.982526] mc: Linux media interface: v0.10 [ 17.404033] videodev: Linux video capture interface: v2.00 [ 18.135696] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b335) [ 18.153042] uvcvideo 3-4:1.0: Entity type for entity Extension 4 was not initialized! [ 18.153048] uvcvideo 3-4:1.0: Entity type for entity Extension 3 was not initialized! [ 18.153053] uvcvideo 3-4:1.0: Entity type for entity Processing 2 was not initialized! [ 18.153057] uvcvideo 3-4:1.0: Entity type for entity Camera 1 was not initialized! [ 18.153397] input: HD WebCam: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input12 [ 18.153945] usbcore: registered new interface driver uvcvideo [ 18.153948] USB Video Class driver (1.1.1) [ 18.440582] intel_pstate: Turbo disabled by BIOS or unavailable on processor [ 19.098506] intel_pstate: Turbo disabled by BIOS or unavailable on processor [ 19.658460] intel_pstate: Turbo disabled by BIOS or unavailable on processor [ 20.246115] intel_pstate: Turbo disabled by BIOS or unavailable on processor [ 20.826868] intel_pstate: Turbo disabled by BIOS or unavailable on processor [ 21.378773] Bluetooth: Core ver 2.22 [ 21.378812] NET: Registered protocol family 31 [ 21.378814] Bluetooth: HCI device and connection manager initialized [ 21.378821] Bluetooth: HCI socket layer initialized [ 21.378825] Bluetooth: L2CAP socket layer initialized [ 21.378834] Bluetooth: SCO socket layer initialized [ 21.519001] usbcore: registered new interface driver btusb [ 21.710413] usbcore: registered new interface driver ath3k [ 21.889514] usb 1-1.4: USB disconnect, device number 3 [ 22.121900] usb 1-1.4: new full-speed USB device number 4 using ehci-pci [ 22.231633] usb 1-1.4: string descriptor 0 read error: -22 [ 22.231644] usb 1-1.4: New USB device found, idVendor=04ca, idProduct=3006, bcdDevice= 0.02 [ 22.231649] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 22.272455] intel_pstate: Turbo disabled by BIOS or unavailable on processor [ 22.804174] intel_pstate: Turbo disabled by BIOS or unavailable on processor [ 23.296659] intel_pstate: Turbo disabled by BIOS or unavailable on processor [ 24.143307] intel_pstate: Turbo disabled by BIOS or unavailable on processor [ 24.973485] intel_pstate: Turbo disabled by BIOS or unavailable on processor [ 27.563963] audit: type=1400 audit(1572949975.311:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=6852 comm="apparmor_parser" [ 27.568876] audit: type=1400 audit(1572949975.315:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=6850 comm="apparmor_parser" [ 27.568885] audit: type=1400 audit(1572949975.315:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=6850 comm="apparmor_parser" [ 27.586180] audit: type=1400 audit(1572949975.335:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=6858 comm="apparmor_parser" [ 27.625089] audit: type=1400 audit(1572949975.371:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=6859 comm="apparmor_parser" [ 27.630201] audit: type=1400 audit(1572949975.379:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=6853 comm="apparmor_parser" [ 27.632518] audit: type=1400 audit(1572949975.379:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=6860 comm="apparmor_parser" [ 27.649709] audit: type=1400 audit(1572949975.395:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=6864 comm="apparmor_parser" [ 27.741095] audit: type=1400 audit(1572949975.487:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=6851 comm="apparmor_parser" [ 27.741104] audit: type=1400 audit(1572949975.487:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=6851 comm="apparmor_parser" [ 36.588507] kauditd_printk_skb: 29 callbacks suppressed [ 36.588511] audit: type=1107 audit(1572949984.335:41): pid=6886 uid=103 auid=4294967295 ses=4294967295 msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/systemd1" interface="org.freedesktop.systemd1.Manager" member="GetDynamicUsers" mask="send" name="org.freedesktop.systemd1" pid=6884 label="/usr/bin/freshclam" peer_pid=1 peer_label="unconfined" exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?' [ 37.430572] intel_pstate: Turbo disabled by BIOS or unavailable on processor [ 38.231692] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 38.231695] Bluetooth: BNEP filters: protocol multicast [ 38.231701] Bluetooth: BNEP socket layer initialized [ 40.805985] RTL8211E Gigabit Ethernet r8169-202:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-202:00, irq=IGNORE) [ 40.951444] r8169 0000:02:00.2 enp2s0f2: Link is Down [ 45.505824] wlp3s0: authenticate with e4:9e:12:cb:5e:c8 [ 45.516616] wlp3s0: send auth to e4:9e:12:cb:5e:c8 (try 1/3) [ 45.519332] wlp3s0: authenticated [ 45.525905] wlp3s0: associate with e4:9e:12:cb:5e:c8 (try 1/3) [ 45.530510] wlp3s0: RX AssocResp from e4:9e:12:cb:5e:c8 (capab=0x411 status=0 aid=3) [ 45.530674] wlp3s0: associated [ 45.599327] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 67.548607] rfkill: input handler disabled [ 198.619586] rfkill: input handler enabled [ 199.286153] Bluetooth: RFCOMM TTY layer initialized [ 199.286177] Bluetooth: RFCOMM socket layer initialized [ 199.286192] Bluetooth: RFCOMM ver 1.11 [ 209.722374] rfkill: input handler disabled [ 705.348240] usb 3-1: USB disconnect, device number 2 [ 708.953650] usb 1-1.2: new full-speed USB device number 5 using ehci-pci [ 709.066199] usb 1-1.2: New USB device found, idVendor=0461, idProduct=4dea, bcdDevice= 4.00 [ 709.066207] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 709.066211] usb 1-1.2: Product: Acer Wireless Optical Mouse [ 709.066214] usb 1-1.2: Manufacturer: reserved [ 709.070022] input: reserved Acer Wireless Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:0461:4DEA.0002/input/input13 [ 709.130140] input: reserved Acer Wireless Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:0461:4DEA.0002/input/input14 [ 709.130770] hid-generic 0003:0461:4DEA.0002: input,hiddev0,hidraw0: USB HID v1.11 Mouse [reserved Acer Wireless Optical Mouse] on usb-0000:00:1a.0-1.2/input0 [ 709.412806] intel_pstate: Turbo disabled by BIOS or unavailable on processor [ 709.943999] intel_pstate: Turbo disabled by BIOS or unavailable on processor [ 710.874082] usb 4-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 710.907350] usb 4-2: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 0.01 [ 710.907357] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 710.907361] usb 4-2: Product: DataTraveler 3.0 [ 710.907365] usb 4-2: Manufacturer: Kingston [ 710.907368] usb 4-2: SerialNumber: 60A44C3FABFFF291596C5F89 [ 711.223176] intel_pstate: Turbo disabled by BIOS or unavailable on processor [ 711.538853] usb-storage 4-2:1.0: USB Mass Storage device detected [ 711.539217] scsi host6: usb-storage 4-2:1.0 [ 711.539495] usbcore: registered new interface driver usb-storage [ 711.551793] usbcore: registered new interface driver uas [ 711.840088] intel_pstate: Turbo disabled by BIOS or unavailable on processor [ 712.546825] scsi 6:0:0:0: Direct-Access Kingston DataTraveler 3.0 PQ: 0 ANSI: 6 [ 712.547777] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 712.548080] sd 6:0:0:0: [sdb] 60437492 512-byte logical blocks: (30.9 GB/28.8 GiB) [ 712.548302] sd 6:0:0:0: [sdb] Write Protect is off [ 712.548312] sd 6:0:0:0: [sdb] Mode Sense: 4f 00 00 00 [ 712.548515] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 712.550979] sdb: sdb1 [ 712.552859] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 712.999190] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 2163.041188] audit: type=1400 audit(1572952110.781:42): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/cdagouret/Documents/cupsd.conf" pid=8845 comm="pool-soffice" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 2163.053161] audit: type=1400 audit(1572952110.793:43): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/cdagouret/Documents/cupsd.conf" pid=8845 comm="pool-soffice" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 2256.493181] audit: type=1400 audit(1572952204.236:44): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/cdagouret/Documents/cupsd.conf" pid=8845 comm="pool-soffice" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 2256.493916] audit: type=1400 audit(1572952204.236:45): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/cdagouret/Documents/cupsd.conf" pid=8845 comm="pool-soffice" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 2415.341910] wlp3s0: authenticate with e4:9e:12:cb:5e:c8 [ 2415.355765] wlp3s0: send auth to e4:9e:12:cb:5e:c8 (try 1/3) [ 2415.358863] wlp3s0: authenticated [ 2415.359922] wlp3s0: associate with e4:9e:12:cb:5e:c8 (try 1/3) [ 2415.364565] wlp3s0: RX AssocResp from e4:9e:12:cb:5e:c8 (capab=0x411 status=0 aid=3) [ 2415.364762] wlp3s0: associated [ 2476.367577] wlp3s0: authenticate with e4:9e:12:cb:5e:c8 [ 2476.381649] wlp3s0: send auth to e4:9e:12:cb:5e:c8 (try 1/3) [ 2476.385583] wlp3s0: authenticated [ 2476.389354] wlp3s0: associate with e4:9e:12:cb:5e:c8 (try 1/3) [ 2476.394040] wlp3s0: RX AssocResp from e4:9e:12:cb:5e:c8 (capab=0x411 status=0 aid=3) [ 2476.394205] wlp3s0: associated [ 3639.744404] usb 4-2: USB disconnect, device number 2 [ 5067.276068] wlp3s0: authenticate with e4:9e:12:cb:5e:c8 [ 5067.289813] wlp3s0: send auth to e4:9e:12:cb:5e:c8 (try 1/3) [ 5067.292987] wlp3s0: authenticated [ 5067.294132] wlp3s0: associate with e4:9e:12:cb:5e:c8 (try 1/3) [ 5067.299023] wlp3s0: RX AssocResp from e4:9e:12:cb:5e:c8 (capab=0x411 status=0 aid=3) [ 5067.299200] wlp3s0: associated [ 5838.218488] wlp3s0: authenticate with e4:9e:12:cb:5e:c8 [ 5838.232362] wlp3s0: send auth to e4:9e:12:cb:5e:c8 (try 1/3) [ 5838.235261] wlp3s0: authenticated [ 5838.236928] wlp3s0: associate with e4:9e:12:cb:5e:c8 (try 1/3) [ 5838.241668] wlp3s0: RX AssocResp from e4:9e:12:cb:5e:c8 (capab=0x411 status=0 aid=3) [ 5838.241849] wlp3s0: associated [ 9563.694191] perf: interrupt took too long (2510 > 2500), lowering kernel.perf_event_max_sample_rate to 79500 [12464.570223] perf: interrupt took too long (3167 > 3137), lowering kernel.perf_event_max_sample_rate to 63000 [12542.007252] wlp3s0: authenticate with e4:9e:12:cb:5e:c8 [12542.021277] wlp3s0: send auth to e4:9e:12:cb:5e:c8 (try 1/3) [12542.024923] wlp3s0: authenticated [12542.029464] wlp3s0: associate with e4:9e:12:cb:5e:c8 (try 1/3) [12542.034149] wlp3s0: RX AssocResp from e4:9e:12:cb:5e:c8 (capab=0x411 status=0 aid=3) [12542.034314] wlp3s0: associated [12993.550966] usb 4-2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd [12993.584013] usb 4-2: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 0.01 [12993.584021] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [12993.584025] usb 4-2: Product: DataTraveler 3.0 [12993.584029] usb 4-2: Manufacturer: Kingston [12993.584032] usb 4-2: SerialNumber: 60A44C3FABFFF291596C5F89 [12993.599362] usb-storage 4-2:1.0: USB Mass Storage device detected [12993.599706] scsi host6: usb-storage 4-2:1.0 [12993.875279] intel_pstate: Turbo disabled by BIOS or unavailable on processor [12994.409712] intel_pstate: Turbo disabled by BIOS or unavailable on processor [12994.619267] scsi 6:0:0:0: Direct-Access Kingston DataTraveler 3.0 PQ: 0 ANSI: 6 [12994.620025] sd 6:0:0:0: Attached scsi generic sg2 type 0 [12994.620370] sd 6:0:0:0: [sdb] 60437492 512-byte logical blocks: (30.9 GB/28.8 GiB) [12994.620563] sd 6:0:0:0: [sdb] Write Protect is off [12994.620569] sd 6:0:0:0: [sdb] Mode Sense: 4f 00 00 00 [12994.620758] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [12994.625933] sdb: sdb1 [12994.627503] sd 6:0:0:0: [sdb] Attached SCSI removable disk [12995.061517] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [13058.990028] wlp3s0: authenticate with e4:9e:12:cb:5e:c8 [13059.003891] wlp3s0: send auth to e4:9e:12:cb:5e:c8 (try 1/3) [13059.007058] wlp3s0: authenticated [13059.011693] wlp3s0: associate with e4:9e:12:cb:5e:c8 (try 1/3) [13059.016361] wlp3s0: RX AssocResp from e4:9e:12:cb:5e:c8 (capab=0x411 status=0 aid=3) [13059.016538] wlp3s0: associated