[ 0.000000] microcode: microcode updated early to revision 0x24, date = 2018-01-21 [ 0.000000] Linux version 4.15.0-13-generic (buildd@lgw01-amd64-023) (gcc version 7.3.0 (Ubuntu 7.3.0-11ubuntu1)) #14-Ubuntu SMP Sat Mar 17 13:44:27 UTC 2018 (Ubuntu 4.15.0-13.14-generic 4.15.10) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-13-generic.efi.signed root=UUID=4df58e27-105a-45d5-8b11-76dcc3e66407 ro quiet splash nouveau.runpm=0 vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009552ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000095530000-0x0000000095e2ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000095e30000-0x000000009c6befff] usable [ 0.000000] BIOS-e820: [mem 0x000000009c6bf000-0x000000009cebefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable [ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x95e32018-0x95e3ae57] usable ==> usable [ 0.000000] e820: update [mem 0x95e32018-0x95e3ae57] usable ==> usable [ 0.000000] e820: update [mem 0x94485018-0x94495057] usable ==> usable [ 0.000000] e820: update [mem 0x94485018-0x94495057] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000006efff] usable [ 0.000000] reserve setup_data: [mem 0x000000000006f000-0x000000000006ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000070000-0x0000000000087fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000094485017] usable [ 0.000000] reserve setup_data: [mem 0x0000000094485018-0x0000000094495057] usable [ 0.000000] reserve setup_data: [mem 0x0000000094495058-0x000000009552ffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000095530000-0x0000000095e2ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000095e30000-0x0000000095e32017] usable [ 0.000000] reserve setup_data: [mem 0x0000000095e32018-0x0000000095e3ae57] usable [ 0.000000] reserve setup_data: [mem 0x0000000095e3ae58-0x000000009c6befff] usable [ 0.000000] reserve setup_data: [mem 0x000000009c6bf000-0x000000009cebefff] reserved [ 0.000000] reserve setup_data: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data [ 0.000000] reserve setup_data: [mem 0x000000009cfff000-0x000000009cffffff] usable [ 0.000000] reserve setup_data: [mem 0x000000009d000000-0x000000009f9fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000025f5fffff] usable [ 0.000000] efi: EFI v2.31 by INSYDE Corp. [ 0.000000] efi: ACPI=0x9cffe000 ACPI 2.0=0x9cffe014 SMBIOS=0x9cebdf18 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Acer Aspire VN7-791/Aspire VN7-791, BIOS V1.07 09/05/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7C00000000 write-back [ 0.000000] 1 base 009D000000 mask 7FFF000000 uncachable [ 0.000000] 2 base 009E000000 mask 7FFE000000 uncachable [ 0.000000] 3 base 00A0000000 mask 7FE0000000 uncachable [ 0.000000] 4 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] total RAM covered: 14800M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 6 lose cover RAM: 0G [ 0.000000] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 82000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x41d3e000, 0x41d3efff] PGTABLE [ 0.000000] BRK [0x41d3f000, 0x41d3ffff] PGTABLE [ 0.000000] BRK [0x41d40000, 0x41d40fff] PGTABLE [ 0.000000] BRK [0x41d41000, 0x41d41fff] PGTABLE [ 0.000000] BRK [0x41d42000, 0x41d42fff] PGTABLE [ 0.000000] BRK [0x41d43000, 0x41d43fff] PGTABLE [ 0.000000] BRK [0x41d44000, 0x41d44fff] PGTABLE [ 0.000000] BRK [0x41d45000, 0x41d45fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3c508000-0x3fffdfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000000009CFFE014 000024 (v02 ACRSYS) [ 0.000000] ACPI: XSDT 0x000000009CFFE210 0000BC (v01 ACRSYS ACRPRDCT 00000001 01000013) [ 0.000000] ACPI: FACP 0x000000009CFF8000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: DSDT 0x000000009CFE5000 00F2E7 (v02 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.000000] ACPI: FACS 0x000000009CFB9000 000040 [ 0.000000] ACPI: UEFI 0x000000009CFFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: FPDT 0x000000009CFFB000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: MSDM 0x000000009CFFA000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: ASF! 0x000000009CFF9000 0000A0 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: HPET 0x000000009CFF7000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: APIC 0x000000009CFF6000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: MCFG 0x000000009CFF5000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 0x000000009CFE3000 000833 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.000000] ACPI: BOOT 0x000000009CFE1000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: LPIT 0x000000009CFE0000 000094 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.000000] ACPI: ASPT 0x000000009CFDE000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: DBGP 0x000000009CFDD000 000034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 0x000000009CFD5000 000539 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: SSDT 0x000000009CFD4000 000AD8 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: SSDT 0x000000009CFD0000 0034DD (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: SSDT 0x000000009CFCB000 003E1B (v01 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.000000] ACPI: DMAR 0x000000009CFE4000 0000B8 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: BGRT 0x000000009CFCF000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025f5fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x25f5d3000-0x25f5fdfff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000025f5fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000006efff] [ 0.000000] node 0: [mem 0x0000000000070000-0x0000000000087fff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000009552ffff] [ 0.000000] node 0: [mem 0x0000000095e30000-0x000000009c6befff] [ 0.000000] node 0: [mem 0x000000009cfff000-0x000000009cffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000025f5fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025f5fffff] [ 0.000000] On node 0 totalpages: 2077510 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3974 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9911 pages used for memmap [ 0.000000] DMA32 zone: 634304 pages, LIFO batch:31 [ 0.000000] Normal zone: 22488 pages used for memmap [ 0.000000] Normal zone: 1439232 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 99 pages [ 0.000000] Reserving Intel graphics memory at 0x000000009da00000-0x000000009f9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x94485000-0x94485fff] [ 0.000000] PM: Registered nosave memory: [mem 0x94495000-0x94495fff] [ 0.000000] PM: Registered nosave memory: [mem 0x95530000-0x95e2ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x95e32000-0x95e32fff] [ 0.000000] PM: Registered nosave memory: [mem 0x95e3a000-0x95e3afff] [ 0.000000] PM: Registered nosave memory: [mem 0x9c6bf000-0x9cebefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9cebf000-0x9cfbefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2045026 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-13-generic.efi.signed root=UUID=4df58e27-105a-45d5-8b11-76dcc3e66407 ro quiet splash nouveau.runpm=0 vt.handoff=1 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7952652K/8310040K available (12300K kernel code, 2473K rwdata, 4224K rodata, 2404K init, 2416K bss, 357388K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 39197 entries in 154 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#1 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] DMAR: Host address width 39 [ 0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 0.000000] DMAR: RMRR base: 0x0000009cdc7000 end: 0x0000009cde6fff [ 0.000000] DMAR: RMRR base: 0x0000009d800000 end: 0x0000009f9fffff [ 0.000000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.000000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.000000] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.000000] x2apic enabled [ 0.000000] Switched APIC routing to cluster x2apic. [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 2494.231 MHz processor [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.46 BogoMIPS (lpj=9976924) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.028678] Security Framework initialized [ 0.028679] Yama: becoming mindful. [ 0.028693] AppArmor: AppArmor initialized [ 0.032842] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.033370] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.033396] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.033413] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.033568] CPU: Physical Processor ID: 0 [ 0.033568] CPU: Processor Core ID: 0 [ 0.033573] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.033573] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.033577] mce: CPU supports 9 MCE banks [ 0.033588] CPU0: Thermal monitoring enabled (TM1) [ 0.033599] process: using mwait in idle threads [ 0.033601] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.033601] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.033602] Spectre V2 : Mitigation: Full generic retpoline [ 0.033603] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.033603] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.033699] Freeing SMP alternatives memory: 36K [ 0.036151] TSC deadline timer enabled [ 0.036154] smpboot: CPU0: Intel(R) Core(TM) i7-4710HQ CPU @ 2.50GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.036186] mce: [Hardware Error]: Machine check events logged [ 0.036187] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 5: ae0000000040110a [ 0.036190] mce: [Hardware Error]: TSC 0 ADDR fef87340 MISC 78a0000086 [ 0.036192] mce: [Hardware Error]: PROCESSOR 0:306c3 TIME 1523256122 SOCKET 0 APIC 0 microcode 24 [ 0.036216] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.036245] ... version: 3 [ 0.036245] ... bit width: 48 [ 0.036246] ... generic registers: 4 [ 0.036246] ... value mask: 0000ffffffffffff [ 0.036247] ... max period: 00007fffffffffff [ 0.036247] ... fixed-purpose events: 3 [ 0.036248] ... event mask: 000000070000000f [ 0.036272] Hierarchical SRCU implementation. [ 0.037175] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.037185] smp: Bringing up secondary CPUs ... [ 0.037233] x86: Booting SMP configuration: [ 0.037234] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.045094] smp: Brought up 1 node, 8 CPUs [ 0.045094] smpboot: Max logical packages: 1 [ 0.045094] smpboot: Total of 8 processors activated (39907.69 BogoMIPS) [ 0.048263] devtmpfs: initialized [ 0.048263] x86/mm: Memory block size: 128MB [ 0.048494] evm: security.selinux [ 0.048494] evm: security.SMACK64 [ 0.048495] evm: security.SMACK64EXEC [ 0.048495] evm: security.SMACK64TRANSMUTE [ 0.048495] evm: security.SMACK64MMAP [ 0.048496] evm: security.apparmor [ 0.048496] evm: security.ima [ 0.048496] evm: security.capability [ 0.048507] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes) [ 0.048507] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.048507] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.048507] pinctrl core: initialized pinctrl subsystem [ 0.048507] RTC time: 6:42:02, date: 04/09/18 [ 0.048507] NET: Registered protocol family 16 [ 0.048507] audit: initializing netlink subsys (disabled) [ 0.048507] audit: type=2000 audit(1523256122.048:1): state=initialized audit_enabled=0 res=1 [ 0.048507] cpuidle: using governor ladder [ 0.048507] cpuidle: using governor menu [ 0.048507] Simple Boot Flag at 0x44 set to 0x1 [ 0.048507] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.048507] ACPI: bus type PCI registered [ 0.048507] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.048507] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.048507] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.048507] PCI: Using configuration type 1 for base access [ 0.048507] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.049043] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.049043] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.049043] ACPI: Added _OSI(Module Device) [ 0.049043] ACPI: Added _OSI(Processor Device) [ 0.049043] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.049043] ACPI: Added _OSI(Processor Aggregator Device) [ 0.049043] ACPI: Executed 1 blocks of module-level executable AML code [ 0.054927] ACPI Error: No handler for Region [RAM_] (00000000f0d12d09) [EmbeddedControl] (20170831/evregion-166) [ 0.054931] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20170831/exfldio-299) [ 0.054936] No Local Variables are initialized for Method [_REG] [ 0.054937] Initialized Arguments for Method [_REG]: (2 arguments defined for method invocation) [ 0.054937] Arg0: 000000003faaf4fa Integer 0000000000000000 [ 0.054940] Arg1: 000000006b49d528 Integer 0000000000000001 [ 0.054943] ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.EC0._REG, AE_NOT_EXIST (20170831/psparse-550) [ 0.054995] ACPI Error: No handler for Region [RAM_] (00000000f0d12d09) [EmbeddedControl] (20170831/evregion-166) [ 0.054997] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20170831/exfldio-299) [ 0.055000] No Local Variables are initialized for Method [_REG] [ 0.055001] Initialized Arguments for Method [_REG]: (2 arguments defined for method invocation) [ 0.055002] Arg0: 000000003faaf4fa Integer 0000000000000001 [ 0.055004] Arg1: 000000006b49d528 Integer 0000000000000001 [ 0.055006] ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.EC0._REG, AE_NOT_EXIST (20170831/psparse-550) [ 0.055839] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.057271] ACPI: Dynamic OEM Table Load: [ 0.057277] ACPI: SSDT 0xFFFF8C5B5526A000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20131115) [ 0.057698] ACPI: Dynamic OEM Table Load: [ 0.057703] ACPI: SSDT 0xFFFF8C5B5680E000 0005AA (v01 PmRef ApIst 00003000 INTL 20131115) [ 0.058160] ACPI: Dynamic OEM Table Load: [ 0.058164] ACPI: SSDT 0xFFFF8C5B55306000 000119 (v01 PmRef ApCst 00003000 INTL 20131115) [ 0.059810] ACPI: EC: EC started [ 0.059811] ACPI: EC: interrupt blocked [ 0.060729] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 0.060731] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.060732] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions [ 0.060732] ACPI: Interpreter enabled [ 0.060758] ACPI: (supports S0 S3 S4 S5) [ 0.060759] ACPI: Using IOAPIC for interrupt routing [ 0.060780] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.060999] ACPI: Enabled 9 GPEs in block 00 to 3F [ 0.086274] ACPI: Power Resource [PG00] (on) [ 0.092192] ACPI: Power Resource [FN00] (off) [ 0.092255] ACPI: Power Resource [FN01] (off) [ 0.092317] ACPI: Power Resource [FN02] (off) [ 0.092378] ACPI: Power Resource [FN03] (off) [ 0.092440] ACPI: Power Resource [FN04] (off) [ 0.093125] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.093129] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.093748] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.093749] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.094236] PCI host bridge to bus 0000:00 [ 0.094237] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.094239] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.094240] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.094240] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.094241] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.094242] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.094243] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.094244] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.094245] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.094246] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.094247] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.094248] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.094249] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.094250] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.094251] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.094252] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] [ 0.094252] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window] [ 0.094254] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.094260] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000 [ 0.094403] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 [ 0.094432] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.094602] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000 [ 0.094611] pci 0000:00:02.0: reg 0x10: [mem 0xd1000000-0xd13fffff 64bit] [ 0.094615] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.094618] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 0.094627] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.094770] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.094778] pci 0000:00:03.0: reg 0x10: [mem 0xd1610000-0xd1613fff 64bit] [ 0.094934] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.094953] pci 0000:00:14.0: reg 0x10: [mem 0xd1600000-0xd160ffff 64bit] [ 0.095006] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.095134] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.095154] pci 0000:00:16.0: reg 0x10: [mem 0xd1618000-0xd161800f 64bit] [ 0.095209] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.095343] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.095937] pci 0000:00:1a.0: reg 0x10: [mem 0xd161d000-0xd161d3ff] [ 0.097221] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.097356] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.097374] pci 0000:00:1b.0: reg 0x10: [mem 0xd1614000-0xd1617fff 64bit] [ 0.097435] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.097568] pci 0000:00:1c.0: [8086:8c14] type 01 class 0x060400 [ 0.097634] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.097809] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.097875] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.098050] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.098495] pci 0000:00:1d.0: reg 0x10: [mem 0xd161c000-0xd161c3ff] [ 0.099819] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.099954] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100 [ 0.100177] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601 [ 0.100193] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f] [ 0.100199] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097] [ 0.100206] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087] [ 0.100212] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093] [ 0.100219] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f] [ 0.100225] pci 0000:00:1f.2: reg 0x24: [mem 0xd161b000-0xd161b7ff] [ 0.100256] pci 0000:00:1f.2: PME# supported from D3hot [ 0.100376] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.100393] pci 0000:00:1f.3: reg 0x10: [mem 0xd1619000-0xd16190ff 64bit] [ 0.100410] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f] [ 0.100589] pci 0000:01:00.0: [10de:1341] type 00 class 0x030200 [ 0.100614] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd0ffffff] [ 0.100631] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref] [ 0.100647] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref] [ 0.100657] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f] [ 0.100668] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref] [ 0.112017] pci 0000:00:01.0: PCI bridge to [bus 01-06] [ 0.112020] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.112022] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd0ffffff] [ 0.112025] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref] [ 0.112111] pci 0000:07:00.0: [168c:0034] type 00 class 0x028000 [ 0.112166] pci 0000:07:00.0: reg 0x10: [mem 0xd1500000-0xd157ffff 64bit] [ 0.112247] pci 0000:07:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ 0.112364] pci 0000:07:00.0: supports D1 D2 [ 0.112365] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.124029] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.124035] pci 0000:00:1c.0: bridge window [mem 0xd1500000-0xd15fffff] [ 0.124152] pci 0000:08:00.0: [14e4:1692] type 00 class 0x020000 [ 0.124204] pci 0000:08:00.0: reg 0x10: [mem 0xd1400000-0xd140ffff 64bit] [ 0.124290] pci 0000:08:00.0: enabling Extended Tags [ 0.124407] pci 0000:08:00.0: PME# supported from D3hot D3cold [ 0.136060] pci 0000:00:1c.3: PCI bridge to [bus 08] [ 0.136065] pci 0000:00:1c.3: bridge window [mem 0xd1400000-0xd14fffff] [ 0.137101] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.137164] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.137224] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.137283] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.137344] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.137403] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.137463] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.137519] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.137927] ACPI: EC: interrupt unblocked [ 0.137937] ACPI: EC: event unblocked [ 0.137942] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.137943] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events [ 0.138082] SCSI subsystem initialized [ 0.138093] libata version 3.00 loaded. [ 0.138093] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.138093] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.138093] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.138093] vgaarb: loaded [ 0.138093] ACPI: bus type USB registered [ 0.138093] usbcore: registered new interface driver usbfs [ 0.138093] usbcore: registered new interface driver hub [ 0.138093] usbcore: registered new device driver usb [ 0.138093] EDAC MC: Ver: 3.0.0 [ 0.138093] Registered efivars operations [ 0.162782] PCI: Using ACPI for IRQ routing [ 0.168132] PCI: pci_cache_line_size set to 64 bytes [ 0.168218] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff] [ 0.168219] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff] [ 0.168220] e820: reserve RAM buffer [mem 0x94485018-0x97ffffff] [ 0.168221] e820: reserve RAM buffer [mem 0x95530000-0x97ffffff] [ 0.168221] e820: reserve RAM buffer [mem 0x95e32018-0x97ffffff] [ 0.168222] e820: reserve RAM buffer [mem 0x9c6bf000-0x9fffffff] [ 0.168223] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff] [ 0.168224] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff] [ 0.168296] NetLabel: Initializing [ 0.168296] NetLabel: domain hash size = 128 [ 0.168297] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.168307] NetLabel: unlabeled traffic allowed by default [ 0.168318] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.168318] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.170083] clocksource: Switched to clocksource hpet [ 0.175544] VFS: Disk quotas dquot_6.6.0 [ 0.175556] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.175632] AppArmor: AppArmor Filesystem Enabled [ 0.175653] pnp: PnP ACPI init [ 0.175819] system 00:00: [io 0xffff] has been reserved [ 0.175821] system 00:00: [io 0xffff] has been reserved [ 0.175822] system 00:00: [io 0xffff] has been reserved [ 0.175823] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.175825] system 00:00: [mem 0xfe802000-0xfe811fff] has been reserved [ 0.175829] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.175872] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.175875] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.175892] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.175929] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.175932] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.175993] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.176138] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.176139] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.176140] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.176141] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.176143] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.176144] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.176145] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.176146] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved [ 0.176147] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.176149] system 00:05: [mem 0x9fa20000-0x9fa20fff] has been reserved [ 0.176150] system 00:05: [mem 0x9fa10000-0x9fa1ffff] has been reserved [ 0.176153] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.176798] pnp: PnP ACPI: found 6 devices [ 0.182886] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.182889] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window [ 0.182891] pci 0000:07:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window [ 0.182912] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref] [ 0.182913] pci 0000:00:01.0: PCI bridge to [bus 01-06] [ 0.182915] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.182917] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd0ffffff] [ 0.182919] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref] [ 0.182922] pci 0000:07:00.0: BAR 6: assigned [mem 0xd1580000-0xd158ffff pref] [ 0.182923] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.182932] pci 0000:00:1c.0: bridge window [mem 0xd1500000-0xd15fffff] [ 0.182939] pci 0000:00:1c.3: PCI bridge to [bus 08] [ 0.182943] pci 0000:00:1c.3: bridge window [mem 0xd1400000-0xd14fffff] [ 0.182950] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.182952] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.182953] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.182954] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.182954] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.182955] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.182956] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.182957] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.182958] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.182959] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.182960] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.182961] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] [ 0.182962] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] [ 0.182963] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] [ 0.182964] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] [ 0.182965] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window] [ 0.182966] pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff window] [ 0.182967] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.182968] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd0ffffff] [ 0.182969] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref] [ 0.182970] pci_bus 0000:07: resource 1 [mem 0xd1500000-0xd15fffff] [ 0.182971] pci_bus 0000:08: resource 1 [mem 0xd1400000-0xd14fffff] [ 0.183063] NET: Registered protocol family 2 [ 0.183202] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.183277] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.183387] TCP: Hash tables configured (established 65536 bind 65536) [ 0.183411] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.183430] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.183470] NET: Registered protocol family 1 [ 0.183480] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.272183] PCI: CLS 64 bytes, default 64 [ 1.272212] Unpacking initramfs... [ 1.901471] Freeing initrd memory: 60376K [ 1.901524] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.901527] software IO TLB [mem 0x8ee40000-0x92e40000] (64MB) mapped at [0000000002836cc3-00000000b7f67c62] [ 1.901836] Scanning for low memory corruption every 60 seconds [ 1.902318] Initialise system trusted keyrings [ 1.902325] Key type blacklist registered [ 1.902356] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 1.903093] zbud: loaded [ 1.903427] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.903526] fuse init (API version 7.26) [ 1.904678] Key type asymmetric registered [ 1.904679] Asymmetric key parser 'x509' registered [ 1.904712] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.904755] io scheduler noop registered [ 1.904755] io scheduler deadline registered [ 1.904792] io scheduler cfq registered (default) [ 1.905474] pcieport 0000:00:01.0: Signaling PME with IRQ 26 [ 1.905491] pcieport 0000:00:1c.0: Signaling PME with IRQ 27 [ 1.905512] pcieport 0000:00:1c.3: Signaling PME with IRQ 28 [ 1.905562] efifb: probing for efifb [ 1.905572] efifb: framebuffer at 0xc0000000, using 8100k, total 8100k [ 1.905573] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 1.905573] efifb: scrolling: redraw [ 1.905575] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.905659] Console: switching to colour frame buffer device 240x67 [ 1.905680] fb0: EFI VGA frame buffer device [ 1.905686] intel_idle: MWAIT substates: 0x42120 [ 1.905687] intel_idle: v0.4.1 model 0x3C [ 1.905966] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.906084] ACPI: AC Adapter [ADP1] (off-line) [ 1.906136] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.906149] ACPI: Power Button [PWRB] [ 1.906172] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.906199] ACPI: Lid Switch [LID0] [ 1.906222] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 1.906243] ACPI: Sleep Button [SLPB] [ 1.906267] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.906287] ACPI: Power Button [PWRF] [ 1.907085] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 1.907165] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.907165] ACPI: Thermal Zone [TZ00] (28 C) [ 1.907404] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.907405] ACPI: Thermal Zone [TZ01] (30 C) [ 1.907956] thermal LNXTHERM:02: registered as thermal_zone2 [ 1.907957] ACPI: Thermal Zone [TZS0] (60 C) [ 1.908196] thermal LNXTHERM:03: registered as thermal_zone3 [ 1.908197] ACPI: Thermal Zone [TZS1] (30 C) [ 1.908316] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.908977] ACPI: Battery Slot [BAT0] (battery present) [ 1.910080] Linux agpgart interface v0.103 [ 1.911703] loop: module loaded [ 1.911899] libphy: Fixed MDIO Bus: probed [ 1.911900] tun: Universal TUN/TAP device driver, 1.6 [ 1.911928] PPP generic driver version 2.4.2 [ 1.911962] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.911964] ehci-pci: EHCI PCI platform driver [ 1.912093] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.912098] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.912113] ehci-pci 0000:00:1a.0: debug port 2 [ 1.916017] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.916028] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd161d000 [ 1.932085] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.932128] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.932130] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.932131] usb usb1: Product: EHCI Host Controller [ 1.932133] usb usb1: Manufacturer: Linux 4.15.0-13-generic ehci_hcd [ 1.932134] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.932333] hub 1-0:1.0: USB hub found [ 1.932338] hub 1-0:1.0: 2 ports detected [ 1.932635] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.932639] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.932656] ehci-pci 0000:00:1d.0: debug port 2 [ 1.936554] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.936567] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd161c000 [ 1.952085] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.952127] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.952128] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.952130] usb usb2: Product: EHCI Host Controller [ 1.952131] usb usb2: Manufacturer: Linux 4.15.0-13-generic ehci_hcd [ 1.952132] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.952309] hub 2-0:1.0: USB hub found [ 1.952314] hub 2-0:1.0: 2 ports detected [ 1.952470] ehci-platform: EHCI generic platform driver [ 1.952487] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.952490] ohci-pci: OHCI PCI platform driver [ 1.952498] ohci-platform: OHCI generic platform driver [ 1.952504] uhci_hcd: USB Universal Host Controller Interface driver [ 1.952667] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.952672] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.953762] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 1.953767] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.953898] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.953900] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.953901] usb usb3: Product: xHCI Host Controller [ 1.953902] usb usb3: Manufacturer: Linux 4.15.0-13-generic xhci-hcd [ 1.953903] usb usb3: SerialNumber: 0000:00:14.0 [ 1.954034] hub 3-0:1.0: USB hub found [ 1.954055] hub 3-0:1.0: 14 ports detected [ 1.955620] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.955622] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.955653] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.955654] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.955655] usb usb4: Product: xHCI Host Controller [ 1.955656] usb usb4: Manufacturer: Linux 4.15.0-13-generic xhci-hcd [ 1.955657] usb usb4: SerialNumber: 0000:00:14.0 [ 1.955754] hub 4-0:1.0: USB hub found [ 1.955768] hub 4-0:1.0: 4 ports detected [ 1.956202] i8042: PNP: PS/2 Controller [PNP0303:KBD0] at 0x60,0x64 irq 1 [ 1.956202] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.957411] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.957601] mousedev: PS/2 mouse device common for all mice [ 1.958048] rtc_cmos 00:02: RTC can wake from S4 [ 1.958157] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.958187] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.958191] i2c /dev entries driver [ 1.958229] device-mapper: uevent: version 1.0.3 [ 1.958276] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 1.958280] intel_pstate: Intel P-state driver initializing [ 1.958646] ledtrig-cpu: registered to indicate activity on CPUs [ 1.958648] EFI Variables Facility v0.08 2004-May-17 [ 1.979453] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.984863] NET: Registered protocol family 10 [ 1.988320] Segment Routing with IPv6 [ 1.988334] NET: Registered protocol family 17 [ 1.988393] Key type dns_resolver registered [ 1.988876] RAS: Correctable Errors collector initialized. [ 1.988916] microcode: sig=0x306c3, pf=0x20, revision=0x24 [ 1.989053] microcode: Microcode Update Driver: v2.2. [ 1.989063] sched_clock: Marking stable (1989048123, 0)->(1973805771, 15242352) [ 1.989324] registered taskstats version 1 [ 1.989330] Loading compiled-in X.509 certificates [ 1.991387] Loaded X.509 cert 'Build time autogenerated kernel key: db5373f8f110b2f912cb35c385d05910a922395e' [ 1.993842] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring [ 1.993859] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring [ 1.995624] Loaded UEFI:db cert 'Wistron Secure Flash: 34988c042fea03ab4cf14666886666c5' linked to secondary sys keyring [ 1.995637] Loaded UEFI:db cert 'Acer Database: 84f00f5841571abd2cc11a8c26d5c9c8d2b6b0b5' linked to secondary sys keyring [ 1.996455] Loaded UEFI:MokListRT cert 'YOUR_NAME: 83ab223fda76fa9bf46d9c9774d98906de1bec0a' linked to secondary sys keyring [ 1.996682] Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring [ 1.997733] zswap: loaded using pool lzo/zbud [ 2.000398] Key type big_key registered [ 2.000401] Key type trusted registered [ 2.001742] Key type encrypted registered [ 2.001743] AppArmor: AppArmor sha1 policy hashing enabled [ 2.001745] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 2.001763] evm: HMAC attrs: 0x1 [ 2.002311] Magic number: 14:979:720 [ 2.002325] block loop0: hash matches [ 2.002430] rtc_cmos 00:02: setting system clock to 2018-04-09 06:42:04 UTC (1523256124) [ 2.002499] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.002499] EDD information not available. [ 2.004382] Freeing unused kernel memory: 2404K [ 2.004383] Write protecting the kernel read-only data: 20480k [ 2.004766] Freeing unused kernel memory: 2008K [ 2.007612] Freeing unused kernel memory: 1920K [ 2.012000] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.012025] x86/mm: Checking user space page tables [ 2.016328] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.089916] pps_core: LinuxPPS API ver. 1 registered [ 2.089917] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.091412] PTP clock support registered [ 2.094318] ahci 0000:00:1f.2: version 3.0 [ 2.094897] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 2.094956] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x24 impl SATA mode [ 2.094967] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst [ 2.109985] scsi host0: ahci [ 2.112017] scsi host1: ahci [ 2.112137] scsi host2: ahci [ 2.116019] scsi host3: ahci [ 2.118554] scsi host4: ahci [ 2.118630] scsi host5: ahci [ 2.118653] ata1: DUMMY [ 2.118654] ata2: DUMMY [ 2.118657] ata3: SATA max UDMA/133 abar m2048@0xd161b000 port 0xd161b200 irq 30 [ 2.118658] ata4: DUMMY [ 2.118658] ata5: DUMMY [ 2.118660] ata6: SATA max UDMA/133 abar m2048@0xd161b000 port 0xd161b380 irq 30 [ 2.140358] tg3.c:v3.137 (May 11, 2014) [ 2.144957] libphy: tg3 mdio bus: probed [ 2.163003] [drm] Memory usable by graphics device = 2048M [ 2.163005] checking generic (c0000000 7e9000) vs hw (c0000000 10000000) [ 2.163005] fb: switching to inteldrmfb from EFI VGA [ 2.163020] Console: switching to colour dummy device 80x25 [ 2.163090] [drm] Replacing VGA console driver [ 2.169241] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.169242] [drm] Driver supports precise vblank timestamp query. [ 2.171338] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.179408] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0 [ 2.179533] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS [ 2.180073] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no) [ 2.180080] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 2.180089] No Local Variables are initialized for Method [_BCL] [ 2.180090] No Arguments are initialized for method [_BCL] [ 2.180092] ACPI Error: Method parse/execution failed \_SB.PCI0.PEG0.PEGP.DD02._BCL, AE_NOT_FOUND (20170831/psparse-550) [ 2.180300] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:48/LNXVIDEO:00/input/input5 [ 2.181687] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.181825] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6 [ 2.199302] fbcon: inteldrmfb (fb0) is primary device [ 2.199348] Console: switching to colour frame buffer device 240x67 [ 2.199374] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.230645] Broadcom BCM57780 800:01: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=800:01, irq=POLL) [ 2.230942] tg3 0000:08:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 20:6a:8a:e1:77:d5 [ 2.230944] tg3 0000:08:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 2.230945] tg3 0000:08:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 2.231876] tg3 0000:08:00.0 enp8s0: renamed from eth0 [ 2.272093] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.296096] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.296112] usb 3-4: new high-speed USB device number 2 using xhci_hcd [ 2.428816] usb 1-1: New USB device found, idVendor=8087, idProduct=8008 [ 2.428818] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.429142] hub 1-1:1.0: USB hub found [ 2.429217] hub 1-1:1.0: 6 ports detected [ 2.431925] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.433699] ata3.00: ATAPI: MATSHITADVD-RAM UJ8E2Q, 1.00, max UDMA/133 [ 2.436227] ata3.00: configured for UDMA/133 [ 2.438550] scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8E2Q 1.00 PQ: 0 ANSI: 5 [ 2.444738] usb 3-4: New USB device found, idVendor=0bda, idProduct=0129 [ 2.444741] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.444742] usb 3-4: Product: USB2.0-CRW [ 2.444743] usb 3-4: Manufacturer: Generic [ 2.444744] usb 3-4: SerialNumber: 20100201396000000 [ 2.452399] usb 2-1: New USB device found, idVendor=8087, idProduct=8000 [ 2.452401] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.452749] hub 2-1:1.0: USB hub found [ 2.452822] hub 2-1:1.0: 8 ports detected [ 2.495520] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.495522] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.495692] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 2.495767] sr 2:0:0:0: Attached scsi generic sg0 type 5 [ 2.572017] usb 3-6: new full-speed USB device number 3 using xhci_hcd [ 2.722016] usb 3-6: New USB device found, idVendor=046d, idProduct=c52f [ 2.722017] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.722019] usb 3-6: Product: USB Receiver [ 2.722020] usb 3-6: Manufacturer: Logitech [ 2.810842] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.811155] ata6.00: ATA-11: KINGSTON SUV400S37240G, 0C3J96R9, max UDMA/133 [ 2.811157] ata6.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 2.811696] ata6.00: configured for UDMA/133 [ 2.811913] scsi 5:0:0:0: Direct-Access ATA KINGSTON SUV400S 96R9 PQ: 0 ANSI: 5 [ 2.812220] sd 5:0:0:0: Attached scsi generic sg1 type 0 [ 2.812377] sd 5:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 2.812379] sd 5:0:0:0: [sda] 4096-byte physical blocks [ 2.812397] sd 5:0:0:0: [sda] Write Protect is off [ 2.812399] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.812429] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.814887] sda: sda1 sda2 sda3 [ 2.815658] sd 5:0:0:0: [sda] Attached SCSI disk [ 2.848067] usb 3-7: new full-speed USB device number 4 using xhci_hcd [ 2.908063] tsc: Refined TSC clocksource calibration: 2494.225 MHz [ 2.908076] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3ea95b09, max_idle_ns: 440795287034 ns [ 3.001697] usb 3-7: New USB device found, idVendor=06cb, idProduct=2970 [ 3.001699] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.001700] usb 3-7: Product: [ 3.001701] usb 3-7: Manufacturer: [ 3.228096] usb 3-9: new high-speed USB device number 5 using xhci_hcd [ 3.385148] usb 3-9: New USB device found, idVendor=04f2, idProduct=b469 [ 3.385150] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.385151] usb 3-9: Product: HD WebCam [ 3.385153] usb 3-9: Manufacturer: Chicony Electronics Co.,Ltd. [ 3.512096] usb 3-10: new full-speed USB device number 6 using xhci_hcd [ 3.661140] usb 3-10: New USB device found, idVendor=04ca, idProduct=300d [ 3.661143] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.664695] hidraw: raw HID events driver (C) Jiri Kosina [ 3.665501] usbcore: registered new interface driver rtsx_usb [ 3.690308] usbcore: registered new interface driver usbhid [ 3.690310] usbhid: USB HID core driver [ 3.692295] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:046D:C52F.0001/input/input7 [ 3.692424] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-6/input0 [ 3.692551] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:046D:C52F.0002/input/input8 [ 3.752118] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-6/input1 [ 3.790271] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 3.926319] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.932577] clocksource: Switched to clocksource tsc [ 3.980266] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 4.000237] systemd[1]: Detected architecture x86-64. [ 4.002106] systemd[1]: Set hostname to . [ 4.151424] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.151598] systemd[1]: Created slice System Slice. [ 4.151660] systemd[1]: Listening on fsck to fsckd communication Socket. [ 4.151714] systemd[1]: Listening on udev Control Socket. [ 4.151793] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 4.151843] systemd[1]: Listening on Journal Socket. [ 4.152250] systemd[1]: Mounting Huge Pages File System... [ 4.163580] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 4.177048] lp: driver loaded but no devices found [ 4.179217] ppdev: user-space parallel port driver [ 4.240570] systemd-journald[329]: Received request to flush runtime journal from PID 1 [ 4.247090] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS [ 4.477350] EDAC ie31200: No ECC support [ 4.481360] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.482257] wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found [ 4.482259] wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found [ 4.482260] wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found [ 4.482261] wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found [ 4.482335] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 4.573134] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170831/utaddress-247) [ 4.573158] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.573171] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20170831/utaddress-247) [ 4.573192] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170831/utaddress-247) [ 4.573209] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.573213] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20170831/utaddress-247) [ 4.573392] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20170831/utaddress-247) [ 4.573414] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170831/utaddress-247) [ 4.573431] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.573436] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20170831/utaddress-247) [ 4.573453] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20170831/utaddress-247) [ 4.573470] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\IO_D) (20170831/utaddress-247) [ 4.573488] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170831/utaddress-247) [ 4.573504] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.573506] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 4.622632] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 4.622818] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.623077] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.644855] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 4.644862] cfg80211: failed to load regulatory.db [ 4.671725] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC283: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 4.671735] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.671743] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 4.671748] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 4.671753] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 4.671760] snd_hda_codec_realtek hdaudioC1D0: Mic=0x12 [ 4.675181] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9 [ 4.675372] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10 [ 4.675569] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11 [ 4.675677] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12 [ 4.675735] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 4.678931] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 4.678932] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 4.678933] RAPL PMU: hw unit of domain package 2^-14 Joules [ 4.678933] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 4.678934] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 4.706520] AVX2 version of gcm_enc/dec engaged. [ 4.706523] AES CTR mode by8 optimization enabled [ 4.726526] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14 [ 4.730187] ath: phy0: ASPM enabled: 0x43 [ 4.730190] ath: EEPROM regdomain: 0x6a [ 4.730190] ath: EEPROM indicates we should expect a direct regpair map [ 4.730192] ath: Country alpha2 being used: 00 [ 4.730193] ath: Regpair used: 0x6a [ 4.758319] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 4.762791] ieee80211 phy0: Atheros AR9462 Rev:3 mem=0xffff9d9781b00000, irq=18 [ 4.847583] intel_rapl: Found RAPL domain package [ 4.847584] intel_rapl: Found RAPL domain core [ 4.847585] intel_rapl: Found RAPL domain uncore [ 4.847586] intel_rapl: Found RAPL domain dram [ 4.847588] intel_rapl: RAPL package 0 domain package locked by BIOS [ 4.950820] acer_wmi: Acer Laptop ACPI-WMI Extras [ 4.950903] acer_wmi: Function bitmap for Communication Button: 0x801 [ 4.969763] input: Acer WMI hotkeys as /devices/virtual/input/input15 [ 5.051260] ath9k 0000:07:00.0 wlp7s0: renamed from wlan0 [ 5.213181] audit: type=1400 audit(1523256127.706:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=888 comm="apparmor_parser" [ 5.213653] audit: type=1400 audit(1523256127.706:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=891 comm="apparmor_parser" [ 5.214338] audit: type=1400 audit(1523256127.706:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=889 comm="apparmor_parser" [ 5.214346] audit: type=1400 audit(1523256127.706:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc//sanitized_helper" pid=889 comm="apparmor_parser" [ 5.214679] audit: type=1400 audit(1523256127.706:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=887 comm="apparmor_parser" [ 5.214690] audit: type=1400 audit(1523256127.706:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=887 comm="apparmor_parser" [ 5.214738] audit: type=1400 audit(1523256127.706:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=887 comm="apparmor_parser" [ 5.218732] audit: type=1400 audit(1523256127.710:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=883 comm="apparmor_parser" [ 5.218744] audit: type=1400 audit(1523256127.710:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=883 comm="apparmor_parser" [ 5.218752] audit: type=1400 audit(1523256127.710:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=883 comm="apparmor_parser" [ 5.295612] random: crng init done [ 5.418950] bbswitch: loading out-of-tree module taints kernel. [ 5.419059] bbswitch: module verification failed: signature and/or required key missing - tainting kernel [ 5.419597] bbswitch: version 0.8 [ 5.419612] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0 [ 5.419625] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP [ 5.419664] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170831/nsarguments-100) [ 5.420531] bbswitch: detected an Optimus _DSM function [ 5.420562] pci 0000:01:00.0: enabling device (0006 -> 0007) [ 5.420755] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on [ 5.422095] bbswitch: disabling discrete graphics [ 5.639845] Bluetooth: Core ver 2.22 [ 5.639859] NET: Registered protocol family 31 [ 5.639860] Bluetooth: HCI device and connection manager initialized [ 5.639862] Bluetooth: HCI socket layer initialized [ 5.639863] Bluetooth: L2CAP socket layer initialized [ 5.639866] Bluetooth: SCO socket layer initialized [ 5.644339] usbcore: registered new interface driver btusb [ 5.645302] usbcore: registered new interface driver ath3k [ 5.650020] media: Linux media interface: v0.10 [ 5.655630] Linux video capture interface: v2.00 [ 5.660815] input: Touchpad as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/0003:06CB:2970.0003/input/input17 [ 5.660936] hid-multitouch 0003:06CB:2970.0003: input,hiddev1,hidraw2: USB HID v1.11 Mouse [ ] on usb-0000:00:14.0-7/input0 [ 5.663667] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.663669] Bluetooth: BNEP filters: protocol multicast [ 5.663672] Bluetooth: BNEP socket layer initialized [ 5.665359] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b469) [ 5.672677] uvcvideo 3-9:1.0: Entity type for entity Extension 4 was not initialized! [ 5.672679] uvcvideo 3-9:1.0: Entity type for entity Extension 3 was not initialized! [ 5.672681] uvcvideo 3-9:1.0: Entity type for entity Processing 2 was not initialized! [ 5.672682] uvcvideo 3-9:1.0: Entity type for entity Camera 1 was not initialized! [ 5.672743] input: HD WebCam: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/input/input23 [ 5.672802] usbcore: registered new interface driver uvcvideo [ 5.672803] USB Video Class driver (1.1.1) [ 5.844104] IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready [ 5.958325] IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready [ 5.958888] tg3 0000:08:00.0 enp8s0: Link is down [ 5.961379] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready [ 5.974198] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready [ 6.060409] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready [ 9.717110] wlp7s0: authenticate with a0:8d:16:0e:b9:7f [ 9.727681] wlp7s0: send auth to a0:8d:16:0e:b9:7f (try 1/3) [ 9.750823] wlp7s0: authenticated [ 9.752031] wlp7s0: associate with a0:8d:16:0e:b9:7f (try 1/3) [ 9.758318] wlp7s0: RX AssocResp from a0:8d:16:0e:b9:7f (capab=0x411 status=0 aid=1) [ 9.758457] wlp7s0: associated [ 9.761445] ath: EEPROM regdomain: 0x817c [ 9.761446] ath: EEPROM indicates we should expect a country code [ 9.761447] ath: doing EEPROM country->regdmn map search [ 9.761447] ath: country maps to regdmn code: 0x37 [ 9.761448] ath: Country alpha2 being used: IT [ 9.761448] ath: Regpair used: 0x37 [ 9.761449] ath: regdomain 0x817c dynamically updated by country IE [ 9.801158] wlp7s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a0:8d:16:0e:b9:7f [ 10.116126] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready [ 25.024692] acer_wmi: Unknown function number - 6 - 1 [ 131.479315] Bluetooth: RFCOMM TTY layer initialized [ 131.479320] Bluetooth: RFCOMM socket layer initialized [ 131.479323] Bluetooth: RFCOMM ver 1.11 [ 132.513092] rfkill: input handler disabled [ 1028.642730] ata6: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 1028.642736] ata6: irq_stat 0x00000040, connection status changed [ 1028.642741] ata6: SError: { CommWake DevExch } [ 1028.642748] ata6: hard resetting link [ 1029.356532] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1029.357324] ata6.00: configured for UDMA/133 [ 1029.357389] ata6: EH complete [ 1035.662789] ata6: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 1035.662795] ata6: irq_stat 0x00000040, connection status changed [ 1035.662799] ata6: SError: { CommWake DevExch } [ 1035.662805] ata6: hard resetting link [ 1036.375046] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1036.375829] ata6.00: configured for UDMA/133 [ 1036.375902] ata6: EH complete [ 1133.686960] ata6: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen [ 1133.686964] ata6: irq_stat 0x00000040, connection status changed [ 1133.686966] ata6: SError: { CommWake 10B8B DevExch } [ 1133.686970] ata6: hard resetting link [ 1134.398287] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1134.399193] ata6.00: configured for UDMA/133 [ 1134.399286] ata6: EH complete [ 1222.424939] usb 3-6: USB disconnect, device number 3 [ 1228.314282] usb 3-6: new full-speed USB device number 7 using xhci_hcd [ 1228.464989] usb 3-6: New USB device found, idVendor=046d, idProduct=c52f [ 1228.464993] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1228.464996] usb 3-6: Product: USB Receiver [ 1228.464998] usb 3-6: Manufacturer: Logitech [ 1228.467341] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:046D:C52F.0004/input/input24 [ 1228.526656] hid-generic 0003:046D:C52F.0004: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-6/input0 [ 1228.527938] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:046D:C52F.0005/input/input25 [ 1228.586830] hid-generic 0003:046D:C52F.0005: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-6/input1 [ 2728.985673] pci_bus 0000:07: Allocating resources [ 2728.985693] pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 07] add_size 1000 [ 2728.985696] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000 add_align 100000 [ 2728.985703] pci_bus 0000:08: Allocating resources [ 2728.985718] pcieport 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000 [ 2728.985720] pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000 add_align 100000 [ 2728.985740] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0x9fb00000-0x9fcfffff 64bit pref] [ 2728.985751] pcieport 0000:00:1c.3: BAR 15: assigned [mem 0x9fd00000-0x9fefffff 64bit pref] [ 2728.985754] pcieport 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 2728.985757] pcieport 0000:00:1c.3: BAR 13: assigned [io 0x5000-0x5fff] [ 2728.985993] pci_bus 0000:01: Allocating resources [ 2729.171109] wlp7s0: deauthenticating from a0:8d:16:0e:b9:7f by local choice (Reason: 3=DEAUTH_LEAVING) [ 2729.411417] PM: suspend entry (deep) [ 2729.411419] PM: Syncing filesystems ... done. [ 2729.416706] bbswitch: enabling discrete graphics [ 2729.535471] Freezing user space processes ... (elapsed 0.057 seconds) done. [ 2729.592831] OOM killer disabled. [ 2729.592831] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 2729.594206] Suspending console(s) (use no_console_suspend to debug) [ 2729.611406] sd 5:0:0:0: [sda] Synchronizing SCSI cache [ 2729.612273] sd 5:0:0:0: [sda] Stopping disk [ 2729.943950] ACPI: Preparing to enter system sleep state S3 [ 2730.098147] ACPI: EC: event blocked [ 2730.098148] ACPI: EC: EC stopped [ 2730.098149] PM: Saving platform NVS memory [ 2730.098161] Disabling non-boot CPUs ... [ 2730.111831] IRQ 30: no longer affine to CPU1 [ 2730.112857] smpboot: CPU 1 is now offline [ 2730.136898] smpboot: CPU 2 is now offline [ 2730.159975] IRQ 27: no longer affine to CPU3 [ 2730.159981] IRQ 31: no longer affine to CPU3 [ 2730.160988] smpboot: CPU 3 is now offline [ 2730.185129] smpboot: CPU 4 is now offline [ 2730.208099] IRQ 16: no longer affine to CPU5 [ 2730.208106] IRQ 18: no longer affine to CPU5 [ 2730.208113] IRQ 26: no longer affine to CPU5 [ 2730.209130] smpboot: CPU 5 is now offline [ 2730.233197] smpboot: CPU 6 is now offline [ 2730.256078] IRQ 23: no longer affine to CPU7 [ 2730.256090] IRQ 28: no longer affine to CPU7 [ 2730.257107] smpboot: CPU 7 is now offline [ 2730.259261] ACPI: Low-level resume complete [ 2730.259325] ACPI: EC: EC started [ 2730.259325] PM: Restoring platform NVS memory [ 2730.261853] mce: [Hardware Error]: Machine check events logged [ 2730.261855] mce: [Hardware Error]: Machine check events logged [ 2730.261866] Enabling non-boot CPUs ... [ 2730.261915] x86: Booting SMP configuration: [ 2730.261916] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 2730.263736] cache: parent cpu1 should not be sleeping [ 2730.263947] CPU1 is up [ 2730.263977] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 2730.265661] cache: parent cpu2 should not be sleeping [ 2730.265885] CPU2 is up [ 2730.265912] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 2730.267590] cache: parent cpu3 should not be sleeping [ 2730.267811] CPU3 is up [ 2730.267835] smpboot: Booting Node 0 Processor 4 APIC 0x4 [ 2730.269524] cache: parent cpu4 should not be sleeping [ 2730.269783] CPU4 is up [ 2730.269809] smpboot: Booting Node 0 Processor 5 APIC 0x5 [ 2730.271492] cache: parent cpu5 should not be sleeping [ 2730.271743] CPU5 is up [ 2730.271777] smpboot: Booting Node 0 Processor 6 APIC 0x6 [ 2730.273463] cache: parent cpu6 should not be sleeping [ 2730.273750] CPU6 is up [ 2730.273777] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 2730.275473] cache: parent cpu7 should not be sleeping [ 2730.275748] CPU7 is up [ 2730.282921] ACPI: Waking up from system sleep state S3 [ 2730.506976] ACPI: EC: event unblocked [ 2730.507039] ath: phy0: ASPM enabled: 0x43 [ 2730.509788] sd 5:0:0:0: [sda] Starting disk [ 2730.753899] usb 3-9: reset high-speed USB device number 5 using xhci_hcd [ 2730.832947] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2730.832977] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2730.837492] ata3.00: configured for UDMA/133 [ 2730.838738] ata6.00: configured for UDMA/133 [ 2731.029955] usb 3-10: reset full-speed USB device number 6 using xhci_hcd [ 2731.177924] usb 3-10: device firmware changed [ 2731.305970] usb 3-6: reset full-speed USB device number 7 using xhci_hcd [ 2731.582022] usb 3-4: reset high-speed USB device number 2 using xhci_hcd [ 2731.858195] usb 3-7: reset full-speed USB device number 4 using xhci_hcd [ 2732.132178] OOM killer enabled. [ 2732.132180] Restarting tasks ... [ 2732.138523] pci_bus 0000:07: Allocating resources [ 2732.138599] pci_bus 0000:08: Allocating resources [ 2732.138880] pci_bus 0000:01: Allocating resources [ 2732.139947] done. [ 2732.141115] bbswitch: disabling discrete graphics [ 2732.173859] usb 3-10: USB disconnect, device number 6 [ 2732.195409] PM: suspend exit [ 2732.220643] IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready [ 2732.305864] usb 3-10: new full-speed USB device number 8 using xhci_hcd [ 2732.334815] IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready [ 2732.335982] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready [ 2732.348789] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready [ 2732.399904] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready [ 2732.462642] usb 3-10: New USB device found, idVendor=04ca, idProduct=300d [ 2732.462645] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2732.516166] usb 3-10: USB disconnect, device number 8 [ 2732.822000] usb 3-10: new full-speed USB device number 9 using xhci_hcd [ 2736.010507] wlp7s0: authenticate with e0:28:6d:96:b2:65 [ 2736.021361] wlp7s0: send auth to e0:28:6d:96:b2:65 (try 1/3) [ 2736.024022] wlp7s0: authenticated [ 2736.026441] wlp7s0: associate with e0:28:6d:96:b2:65 (try 1/3) [ 2736.050505] wlp7s0: RX AssocResp from e0:28:6d:96:b2:65 (capab=0x411 status=0 aid=1) [ 2736.050630] wlp7s0: associated [ 2736.053655] ath: EEPROM regdomain: 0x817c [ 2736.053656] ath: EEPROM indicates we should expect a country code [ 2736.053657] ath: doing EEPROM country->regdmn map search [ 2736.053657] ath: country maps to regdmn code: 0x37 [ 2736.053658] ath: Country alpha2 being used: IT [ 2736.053658] ath: Regpair used: 0x37 [ 2736.053659] ath: regdomain 0x817c dynamically updated by country IE [ 2736.066334] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready [ 2736.152556] wlp7s0: Limiting TX power to 20 (23 - 3) dBm as advertised by e0:28:6d:96:b2:65 [ 2737.994733] usb 3-10: device descriptor read/64, error -110 [ 2753.613182] usb 3-10: device descriptor read/64, error -110 [ 2753.849182] usb 3-10: new full-speed USB device number 10 using xhci_hcd [ 2758.990014] usb 3-10: device descriptor read/64, error -110 [ 2764.387659] usb 3-10: New USB device found, idVendor=04ca, idProduct=300d [ 2764.387661] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2772.140251] acer_wmi: Unknown function number - 6 - 1 [ 2799.680776] kauditd_printk_skb: 34 callbacks suppressed [ 2799.680778] audit: type=1400 audit(1523291031.409:46): apparmor="DENIED" operation="open" profile="/usr/sbin/cups-browsed" name="/usr/share/cups/locale/" pid=1054 comm="cups-browsed" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 [ 2799.680783] audit: type=1400 audit(1523291031.409:47): apparmor="DENIED" operation="open" profile="/usr/sbin/cups-browsed" name="/usr/share/locale/" pid=1054 comm="cups-browsed" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 [ 2847.106882] wlp7s0: deauthenticating from e0:28:6d:96:b2:65 by local choice (Reason: 3=DEAUTH_LEAVING) [ 2856.941766] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready [ 2857.008533] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready [ 2860.626201] wlp7s0: authenticate with e0:28:6d:96:b2:65 [ 2860.636899] wlp7s0: send auth to e0:28:6d:96:b2:65 (try 1/3) [ 2860.639482] wlp7s0: authenticated [ 2860.645839] wlp7s0: associate with e0:28:6d:96:b2:65 (try 1/3) [ 2860.665931] wlp7s0: RX AssocResp from e0:28:6d:96:b2:65 (capab=0x411 status=0 aid=1) [ 2860.666055] wlp7s0: associated [ 2860.668994] ath: EEPROM regdomain: 0x817c [ 2860.668995] ath: EEPROM indicates we should expect a country code [ 2860.668995] ath: doing EEPROM country->regdmn map search [ 2860.668996] ath: country maps to regdmn code: 0x37 [ 2860.668996] ath: Country alpha2 being used: IT [ 2860.668997] ath: Regpair used: 0x37 [ 2860.668997] ath: regdomain 0x817c dynamically updated by country IE [ 2860.673097] wlp7s0: Limiting TX power to 20 (23 - 3) dBm as advertised by e0:28:6d:96:b2:65 [ 2860.683229] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready [ 2890.934476] traps: cupsd[11503] general protection ip:558440aec7fb sp:7f583f61fbc0 error:0 in cupsd[558440abb000+66000]