[ 39.593977] audit: type=1305 audit(1421348229.585:42): audit_pid=6755 old=0 auid=4294967295 ses=4294967295 res=1 [ 41.345153] init: friendly-recovery post-stop process (3050) terminated with status 1 [ 43.725579] systemd-logind[5898]: Failed to start unit user@155.service: Unknown unit: user@155.service [ 43.725615] systemd-logind[5898]: Failed to start user service: Unknown unit: user@155.service [ 43.728776] systemd-logind[5898]: New session c1 of user flumotion. [ 47.490117] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 47.926712] ip_tables: (C) 2000-2006 Netfilter Core Team [ 48.223457] systemd-logind[5898]: New session c2 of user flumotion. [ 48.449983] init: lxc-android-config post-start process (4940) terminated with status 1 [ 50.110159] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 60.734486] systemd-logind[5898]: New session c3 of user flumotion. [ 75.290181] bbswitch: module verification failed: signature and/or required key missing - tainting kernel [ 75.290520] bbswitch: version 0.7 [ 75.290527] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0 [ 75.290535] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP [ 75.290550] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95) [ 75.290694] bbswitch: detected an Optimus _DSM function [ 75.290708] pci 0000:01:00.0: enabling device (0006 -> 0007) [ 75.290745] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on [ 75.292642] bbswitch: disabling discrete graphics [ 75.292649] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95) [ 76.968485] systemd-logind[5898]: Failed to start unit user@139.service: Unknown unit: user@139.service [ 76.968492] systemd-logind[5898]: Failed to start user service: Unknown unit: user@139.service [ 76.971402] systemd-logind[5898]: New session c4 of user gdm. [ 76.971419] systemd-logind[5898]: Linked /tmp/.X11-unix/X0 to /run/user/139/X11-display. [ 78.639391] postgres (7821): /proc/7821/oom_adj is deprecated, please use /proc/7821/oom_score_adj instead. [ 86.585091] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0001: -71 [ 86.588570] ax88179_178a 2-1.4:1.0 eth0: Failed to write reg index 0x0001: -71 [ 86.927370] init: apport-noui (/var/crash/_usr_lib_unity_unity-panel-service.1000.crash) main process (8037) terminated with status 1 [ 86.929811] init: apport-noui (/var/crash/_usr_lib_x86_64-linux-gnu_indicator-session_indicator-session-service.1000.crash) main process (8040) terminated with status 1 [ 86.964333] init: apport-noui (/var/crash/_usr_lib_ubuntu-push-client_click-hook.1000.crash) main process (8036) terminated with status 1 [ 86.964838] init: apport-noui (/var/crash/_usr_lib_x86_64-linux-gnu_indicator-location_indicator-location-service.1000.crash) main process (8039) terminated with status 1 [ 86.984926] init: apport-noui (/var/crash/_usr_bin_qtcreator.1000.crash) main process (8033) terminated with status 1 [ 87.022094] init: apport-noui (/var/crash/_opt_extras.ubuntu.com_my-weather-indicator_bin_my-weather-indicator.1000.crash) main process (8025) terminated with status 1 [ 87.079962] init: apport-noui (/var/crash/_opt_spotify_spotify-client_spotify.1000.crash) main process (8026) terminated with status 1 [ 87.140432] init: apport-noui (/var/crash/_usr_sbin_ulatencyd.0.crash) main process (8042) terminated with status 1 [ 87.173944] init: apport-noui (/var/crash/_usr_bin_Xorg.0.crash) main process (8027) terminated with status 1 [ 87.197324] init: apport-noui (/var/crash/gnome-icon-theme-gartoon-redux.0.crash) main process (8045) terminated with status 1 [ 87.223999] init: apport-noui (/var/crash/_usr_lib_ibus_ibus-x11.1000.crash) main process (8035) terminated with status 1 [ 87.228421] init: apport-noui (/var/crash/_usr_lib_virtualbox_VirtualBox.0.crash) main process (8038) terminated with status 1 [ 87.253207] init: apport-noui (/var/crash/_usr_bin_apt-get.0.crash) main process (8029) terminated with status 1 [ 87.253493] init: apport-noui (/var/crash/_usr_bin_compiz.1000.crash) main process (8030) terminated with status 1 [ 87.253714] init: apport-noui (/var/crash/cuda-drivers.0.crash) main process (8044) terminated with status 1 [ 87.253942] init: apport-noui (/var/crash/libwebkitgtk-3.0-0-dbg.0.crash) main process (8050) terminated with status 1 [ 87.284141] init: apport-noui (/var/crash/_usr_bin_apport-retrace.1000.crash) main process (8028) terminated with status 1 [ 87.291327] init: apport-noui (/var/crash/libwebkit2gtk-3.0-dev.0.crash) main process (8048) terminated with status 1 [ 87.291664] init: apport-noui (/var/crash/munge.0.crash) main process (8051) terminated with status 1 [ 87.292117] init: apport-noui (/var/crash/_usr_bin_mediascanner-service-2.0.1000.crash) main process (8032) terminated with status 1 [ 87.321193] init: apport-noui (/var/crash/_usr_bin_flumotion-worker.155.crash) main process (8031) terminated with status 1 [ 87.321460] init: apport-noui (/var/crash/_usr_bin_vlc.1000.crash) main process (8034) terminated with status 1 [ 87.321691] init: apport-noui (/var/crash/libwebkit2gtk-3.0-25-dbg.0.crash) main process (8047) terminated with status 1 [ 87.321917] init: apport-noui (/var/crash/nvidia-340-uvm.0.crash) main process (8052) terminated with status 1 [ 87.322139] init: apport-noui (/var/crash/nvidia-340.0.crash) main process (8053) terminated with status 1 [ 87.341794] init: apport-noui (/var/crash/_usr_lib_x86_64-linux-gnu_pay-service_pay-service.1000.crash) main process (8041) terminated with status 1 [ 87.342005] init: apport-noui (/var/crash/_usr_sbin_update-apt-xapian-index.0.crash) main process (8043) terminated with status 1 [ 87.342195] init: apport-noui (/var/crash/libvtk6.1.0.crash) main process (8046) terminated with status 1 [ 87.342409] init: apport-noui (/var/crash/nvidia-346.0.crash) main process (8054) terminated with status 1 [ 87.353773] init: apport-noui (/var/crash/libwebkitgtk-1.0-0-dbg.0.crash) main process (8049) terminated with status 1 [ 88.425360] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0000: -71 [ 88.428806] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0001: -71 [ 88.432353] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0009: -71 [ 88.435852] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x000a: -71 [ 88.443111] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0000: -71 [ 88.446617] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0001: -71 [ 88.450123] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0009: -71 [ 88.453618] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x000a: -71 [ 89.144182] vboxdrv: Found 8 processor cores. [ 89.144381] vboxdrv: fAsync=0 offMin=0x12a offMax=0xdfa [ 89.144445] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 89.144446] vboxdrv: Successfully loaded version 4.3.20 (interface 0x001a0008). [ 89.579608] vboxpci: IOMMU not found (not registered) [ 91.464146] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0000: -71 [ 91.467716] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0001: -71 [ 91.471215] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0009: -71 [ 91.474761] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x000a: -71 [ 94.468517] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0000: -71 [ 94.472016] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0001: -71 [ 94.475530] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0009: -71 [ 94.479007] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x000a: -71 [ 97.474185] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0000: -71 [ 97.477675] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0001: -71 [ 97.481171] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0009: -71 [ 97.484749] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x000a: -71 [ 100.479616] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0000: -71 [ 100.483118] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0001: -71 [ 100.486615] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0009: -71 [ 100.490057] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x000a: -71 [ 103.482992] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0000: -71 [ 103.486419] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0001: -71 [ 103.489980] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0009: -71 [ 103.493424] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x000a: -71 [ 106.489353] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0000: -71 [ 106.492824] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0001: -71 [ 106.496354] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0009: -71 [ 106.499866] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x000a: -71 [ 109.493642] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0000: -71 [ 109.497139] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0001: -71 [ 109.500650] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0009: -71 [ 109.504154] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x000a: -71 [ 112.500090] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0000: -71 [ 112.503584] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0001: -71 [ 112.507040] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0009: -71 [ 112.510594] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x000a: -71 [ 114.852302] systemd-logind[5898]: Failed to start unit user@1000.service: Unknown unit: user@1000.service [ 114.852309] systemd-logind[5898]: Failed to start user service: Unknown unit: user@1000.service [ 114.855032] systemd-logind[5898]: New session c5 of user richter. [ 114.855050] systemd-logind[5898]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display. [ 115.505177] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0000: -71 [ 115.508638] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0001: -71 [ 115.512141] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0009: -71 [ 115.515646] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x000a: -71 [ 118.508578] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0000: -71 [ 118.512015] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0001: -71 [ 118.515588] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0009: -71 [ 118.519091] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x000a: -71 [ 121.512099] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0000: -71 [ 121.515599] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0001: -71 [ 121.519097] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0009: -71 [ 121.522606] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x000a: -71 [ 124.516571] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0000: -71 [ 124.519979] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0001: -71 [ 124.523570] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0009: -71 [ 124.527078] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x000a: -71 [ 127.522941] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0000: -71 [ 127.526438] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0001: -71 [ 127.529898] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0009: -71 [ 127.533457] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x000a: -71 [ 130.528310] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0000: -71 [ 130.531812] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0001: -71 [ 130.535316] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0009: -71 [ 130.538783] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x000a: -71 [ 133.531366] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0000: -71 [ 133.534930] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0001: -71 [ 133.538436] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0009: -71 [ 133.541871] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x000a: -71 [ 136.537687] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0000: -71 [ 136.541222] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0001: -71 [ 136.544697] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0009: -71 [ 136.548182] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x000a: -71 [ 139.542141] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0000: -71 [ 139.545637] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0001: -71 [ 139.549179] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0009: -71 [ 139.552671] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x000a: -71 [ 142.548482] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0000: -71 [ 142.552001] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0001: -71 [ 142.555465] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0009: -71 [ 142.558995] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x000a: -71 [ 145.553868] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0000: -71 [ 145.557373] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0001: -71 [ 145.560821] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0009: -71 [ 145.564421] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x000a: -71 [ 148.557034] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0000: -71 [ 148.560517] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0001: -71 [ 148.564035] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0009: -71 [ 148.567529] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x000a: -71 [ 149.437492] usb 2-1.4: USB disconnect, device number 4 [ 149.437546] ax88179_178a 2-1.4:1.0 eth0: unregister 'ax88179_178a' usb-0000:00:14.0-1.4, ASIX AX88179 USB 3.0 Gigabit Ethernet [ 149.437558] ax88179_178a 2-1.4:1.0 eth0: Failed to read reg index 0x0002: -19 [ 149.437561] ax88179_178a 2-1.4:1.0 eth0: Failed to write reg index 0x0002: -19 [ 149.466662] ax88179_178a 2-1.4:1.0 eth0 (unregistered): Failed to write reg index 0x0002: -19 [ 149.466666] ax88179_178a 2-1.4:1.0 eth0 (unregistered): Failed to write reg index 0x0001: -19 [ 149.466668] ax88179_178a 2-1.4:1.0 eth0 (unregistered): Failed to write reg index 0x0002: -19 [ 150.485252] usb 2-1.4: new SuperSpeed USB device number 6 using xhci_hcd [ 150.506418] usb 2-1.4: New USB device found, idVendor=0b95, idProduct=1790 [ 150.506426] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 150.506430] usb 2-1.4: Product: AX88179 [ 150.506433] usb 2-1.4: Manufacturer: ASIX Elec. Corp. [ 150.506436] usb 2-1.4: SerialNumber: 00000000000000 [ 150.829675] ax88179_178a 2-1.4:1.0 eth0: register 'ax88179_178a' at usb-0000:00:14.0-1.4, ASIX AX88179 USB 3.0 Gigabit Ethernet, 00:00:0b:00:0d:8d [ 151.881958] ax88179_178a 2-1.4:1.0 eth1: renamed from eth0 [ 151.897456] systemd-udevd[9620]: renamed network interface eth0 to eth1 [ 152.227577] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 154.866597] ax88179_178a 2-1.4:1.0 eth1: ax88179 - Link status is: 1 [ 154.872838] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 161.444886] init: docker main process (10126) terminated with status 127 [ 161.444896] init: docker main process ended, respawning [ 161.462683] init: docker main process (10157) terminated with status 127 [ 161.462693] init: docker main process ended, respawning [ 161.481963] init: docker main process (10188) terminated with status 127 [ 161.481975] init: docker main process ended, respawning [ 161.501855] init: docker main process (10219) terminated with status 127 [ 161.501869] init: docker main process ended, respawning [ 161.520326] init: docker main process (10250) terminated with status 127 [ 161.520335] init: docker main process ended, respawning [ 161.537238] init: docker main process (10281) terminated with status 127 [ 161.537247] init: docker main process ended, respawning [ 161.554967] init: docker main process (10312) terminated with status 127 [ 161.554976] init: docker main process ended, respawning [ 161.572447] init: docker main process (10343) terminated with status 127 [ 161.572457] init: docker main process ended, respawning [ 161.589520] init: docker main process (10374) terminated with status 127 [ 161.589529] init: docker main process ended, respawning [ 161.606431] init: docker main process (10405) terminated with status 127 [ 161.606440] init: docker main process ended, respawning [ 161.625492] init: docker main process (10436) terminated with status 127 [ 161.625504] init: docker respawning too fast, stopped [ 476.469754] systemd-hostnamed[13075]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 541.582541] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 541.601908] JFS: nTxBlock = 8192, nTxLock = 65536 [ 541.612948] ntfs: driver 2.1.31 [Flags: R/O MODULE]. [ 541.630817] QNX4 filesystem 0.2.3 registered. [ 547.137408] usb 2-1.3.1.1: new SuperSpeed USB device number 7 using xhci_hcd [ 547.153103] usb 2-1.3.1.1: New USB device found, idVendor=174c, idProduct=55aa [ 547.153106] usb 2-1.3.1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 547.153107] usb 2-1.3.1.1: Product: ASMT1053 [ 547.153108] usb 2-1.3.1.1: Manufacturer: asmedia [ 547.153109] usb 2-1.3.1.1: SerialNumber: 00000000000000000000 [ 547.287877] usbcore: registered new interface driver usb-storage [ 547.290094] scsi host6: uas [ 547.290183] usbcore: registered new interface driver uas [ 547.290471] scsi 6:0:0:0: Direct-Access asmedia ASMT1053 0 PQ: 0 ANSI: 6 [ 547.290949] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 547.291117] sd 6:0:0:0: [sdb] Spinning up disk... [ 548.293698] ............ready [ 559.533259] sd 6:0:0:0: [sdb] 1220942646 4096-byte logical blocks: (5.00 TB/4.54 TiB) [ 559.533638] sd 6:0:0:0: [sdb] Write Protect is off [ 559.533650] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 559.533788] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 559.534268] sd 6:0:0:0: [sdb] 1220942646 4096-byte logical blocks: (5.00 TB/4.54 TiB) [ 559.594016] sdb: sdb1 [ 559.594524] sd 6:0:0:0: [sdb] 1220942646 4096-byte logical blocks: (5.00 TB/4.54 TiB) [ 559.595084] sd 6:0:0:0: [sdb] Attached SCSI disk [ 560.023786] BTRFS: device fsid bd6298ea-0748-45fe-87c8-eace6793ca89 devid 1 transid 53006 /dev/sdb1 [ 564.075412] BTRFS info (device sdb1): force zlib compression [ 564.075415] BTRFS info (device sdb1): disk space caching is enabled [ 780.535315] init: apport-noui (/var/crash/_opt_extras.ubuntu.com_my-weather-indicator_bin_my-weather-indicator.1000.crash) main process (9390) terminated with status 1 [ 780.536254] init: apport-noui (/var/crash/_usr_bin_Xorg.0.crash) main process (9392) terminated with status 1 [ 780.558388] init: apport-noui (/var/crash/_opt_spotify_spotify-client_spotify.1000.crash) main process (9391) terminated with status 1 [ 780.793072] init: apport-noui (/var/crash/_usr_lib_x86_64-linux-gnu_pay-service_pay-service.1000.crash) main process (9406) terminated with status 1 [ 780.833480] init: apport-noui (/var/crash/_usr_bin_apport-retrace.1000.crash) main process (9393) terminated with status 1 [ 780.921194] init: apport-noui (/var/crash/_usr_sbin_ulatencyd.0.crash) main process (9407) terminated with status 1 [ 781.008281] init: apport-noui (/var/crash/_usr_bin_flumotion-worker.155.crash) main process (9396) terminated with status 1 [ 781.021263] init: apport-noui (/var/crash/_usr_bin_vlc.1000.crash) main process (9399) terminated with status 1 [ 781.026705] init: apport-noui (/var/crash/_usr_bin_compiz.1000.crash) main process (9395) terminated with status 1 [ 781.049281] init: apport-noui (/var/crash/_usr_lib_unity_unity-panel-service.1000.crash) main process (9402) terminated with status 1 [ 781.063020] init: apport-noui (/var/crash/_usr_sbin_update-apt-xapian-index.0.crash) main process (9408) terminated with status 1 [ 781.085304] init: apport-noui (/var/crash/_usr_bin_apt-get.0.crash) main process (9394) terminated with status 1 [ 781.126569] init: apport-noui (/var/crash/_usr_lib_ibus_ibus-x11.1000.crash) main process (9400) terminated with status 1 [ 781.147862] init: apport-noui (/var/crash/cuda-drivers.0.crash) main process (9426) terminated with status 1 [ 781.148546] init: apport-noui (/var/crash/nvidia-340.0.crash) main process (9436) terminated with status 1 [ 781.163428] init: apport-noui (/var/crash/_usr_lib_ubuntu-push-client_click-hook.1000.crash) main process (9401) terminated with status 1 [ 781.179535] init: apport-noui (/var/crash/_usr_lib_x86_64-linux-gnu_indicator-location_indicator-location-service.1000.crash) main process (9404) terminated with status 1 [ 781.182174] init: apport-noui (/var/crash/gnome-icon-theme-gartoon-redux.0.crash) main process (9427) terminated with status 1 [ 781.183942] init: apport-noui (/var/crash/libwebkitgtk-3.0-0-dbg.0.crash) main process (9433) terminated with status 1 [ 781.213832] init: apport-noui (/var/crash/_usr_lib_virtualbox_VirtualBox.0.crash) main process (9403) terminated with status 1 [ 781.219214] init: apport-noui (/var/crash/nvidia-346.0.crash) main process (9437) terminated with status 1 [ 781.245027] init: apport-noui (/var/crash/libwebkit2gtk-3.0-25-dbg.0.crash) main process (9430) terminated with status 1 [ 781.267371] init: apport-noui (/var/crash/libvtk6.1.0.crash) main process (9428) terminated with status 1 [ 781.267951] init: apport-noui (/var/crash/libwebkit2gtk-3.0-dev.0.crash) main process (9431) terminated with status 1 [ 781.268519] init: apport-noui (/var/crash/munge.0.crash) main process (9434) terminated with status 1 [ 781.269088] init: apport-noui (/var/crash/nvidia-340-uvm.0.crash) main process (9435) terminated with status 1 [ 781.284630] init: apport-noui (/var/crash/_usr_bin_qtcreator.1000.crash) main process (9398) terminated with status 1 [ 781.284944] init: apport-noui (/var/crash/_usr_bin_mediascanner-service-2.0.1000.crash) main process (9397) terminated with status 1 [ 781.285226] init: apport-noui (/var/crash/libwebkitgtk-1.0-0-dbg.0.crash) main process (9432) terminated with status 1 [ 781.303799] init: apport-noui (/var/crash/_usr_lib_x86_64-linux-gnu_indicator-session_indicator-session-service.1000.crash) main process (9405) terminated with status 1 [ 1013.912101] systemd-hostnamed[12710]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 1089.858850] capability: warning: `VirtualBox' uses 32-bit capabilities (legacy support in use) [ 1100.912001] EXT4-fs (loop0): warning: mounting fs with errors, running e2fsck is recommended [ 1100.913805] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) [ 1401.402412] EXT4-fs (loop0): error count since last fsck: 3 [ 1401.402417] EXT4-fs (loop0): initial error at time 1421025987: ext4_journal_check_start:56 [ 1401.402419] EXT4-fs (loop0): last error at time 1421026240: ext4_put_super:789 [ 1685.353620] usblp2: removed [ 1685.353759] usblp3: removed [ 1743.213361] usb 1-1.1: USB disconnect, device number 4 [ 2631.293642] ax88179_178a 2-1.4:1.0 eth1: ax88179 - Link status is: 0 [ 2634.112574] ax88179_178a 2-1.4:1.0 eth1: ax88179 - Link status is: 1 [ 2634.496997] ax88179_178a 2-1.4:1.0 eth1: ax88179 - Link status is: 0 [ 2637.315896] ax88179_178a 2-1.4:1.0 eth1: ax88179 - Link status is: 1 [ 2638.853509] ax88179_178a 2-1.4:1.0 eth1: ax88179 - Link status is: 0 [ 2641.544330] ax88179_178a 2-1.4:1.0 eth1: ax88179 - Link status is: 1 [ 2642.056836] ax88179_178a 2-1.4:1.0 eth1: ax88179 - Link status is: 0 [ 2654.485734] ax88179_178a 2-1.4:1.0 eth1: ax88179 - Link status is: 1 [ 2944.508002] usb 1-1.1: new high-speed USB device number 10 using xhci_hcd [ 2944.622022] usb 1-1.1: New USB device found, idVendor=04a9, idProduct=26a3 [ 2944.622025] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2944.622027] usb 1-1.1: Product: MF4100 [ 2944.622028] usb 1-1.1: Manufacturer: Canon Inc. [ 2944.622029] usb 1-1.1: SerialNumber: SDF7X0141050B [ 2944.630342] usblp 1-1.1:1.1: usblp2: USB Bidirectional printer dev 10 if 1 alt 0 proto 2 vid 0x04A9 pid 0x26A3 [ 2944.636946] usblp 1-1.1:1.2: usblp3: USB Bidirectional printer dev 10 if 2 alt 0 proto 2 vid 0x04A9 pid 0x26A3 [ 2945.708778] usblp2: removed [ 2945.735156] usblp 1-1.1:1.1: usblp2: USB Bidirectional printer dev 10 if 1 alt 0 proto 2 vid 0x04A9 pid 0x26A3 [ 2945.735308] usblp3: removed [ 2945.754573] usblp 1-1.1:1.2: usblp3: USB Bidirectional printer dev 10 if 2 alt 0 proto 2 vid 0x04A9 pid 0x26A3 [ 2969.744466] usblp2: removed [ 2969.744557] usblp3: removed [ 3192.313747] usb 1-1.1: reset high-speed USB device number 10 using xhci_hcd [ 3192.313769] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 15. [ 3192.313772] usb 1-1.1: hub failed to enable device, error -22 [ 3192.390764] usb 1-1.1: reset high-speed USB device number 10 using xhci_hcd [ 3192.390791] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 15. [ 3192.390795] usb 1-1.1: hub failed to enable device, error -22 [ 3192.469363] usb 1-1.1: reset high-speed USB device number 10 using xhci_hcd [ 3192.506166] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88014339e900 [ 3192.506171] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88014339e948 [ 3192.506172] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88014339e990 [ 3192.506174] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88015b380f00 [ 3192.506175] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88015b380f48 [ 3192.506176] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88015b3809c0 [ 3192.506178] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88015b380a08 [ 3192.519034] usblp 1-1.1:1.1: usblp2: USB Bidirectional printer dev 10 if 1 alt 0 proto 2 vid 0x04A9 pid 0x26A3 [ 3192.528785] usblp 1-1.1:1.2: usblp3: USB Bidirectional printer dev 10 if 2 alt 0 proto 2 vid 0x04A9 pid 0x26A3 [ 3194.494074] usblp2: removed [ 3194.494156] usblp3: removed [ 3670.590055] usb 1-1.1: USB disconnect, device number 10 [ 6316.745541] usb 1-1.1: new high-speed USB device number 11 using xhci_hcd [ 6316.856269] usb 1-1.1: New USB device found, idVendor=04a9, idProduct=26a3 [ 6316.856277] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6316.856280] usb 1-1.1: Product: MF4100 [ 6316.856284] usb 1-1.1: Manufacturer: Canon Inc. [ 6316.856286] usb 1-1.1: SerialNumber: SDF7X0141050B [ 6316.864723] usblp 1-1.1:1.1: usblp2: USB Bidirectional printer dev 11 if 1 alt 0 proto 2 vid 0x04A9 pid 0x26A3 [ 6316.871164] usblp 1-1.1:1.2: usblp3: USB Bidirectional printer dev 11 if 2 alt 0 proto 2 vid 0x04A9 pid 0x26A3 [ 6317.986448] usblp2: removed [ 6318.005951] usblp 1-1.1:1.1: usblp2: USB Bidirectional printer dev 11 if 1 alt 0 proto 2 vid 0x04A9 pid 0x26A3 [ 6318.006085] usblp3: removed [ 6318.025280] usblp 1-1.1:1.2: usblp3: USB Bidirectional printer dev 11 if 2 alt 0 proto 2 vid 0x04A9 pid 0x26A3 [ 6324.481221] usblp2: removed [ 6324.481310] usblp3: removed [ 6407.744196] usb 1-1.1: reset high-speed USB device number 11 using xhci_hcd [ 6407.744222] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 16. [ 6407.744227] usb 1-1.1: hub failed to enable device, error -22 [ 6407.824397] usb 1-1.1: reset high-speed USB device number 11 using xhci_hcd [ 6407.824443] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 16. [ 6407.824446] usb 1-1.1: hub failed to enable device, error -22 [ 6407.904582] usb 1-1.1: reset high-speed USB device number 11 using xhci_hcd [ 6407.941317] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88015a25a600 [ 6407.941341] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88015a25a648 [ 6407.941343] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88015a25a690 [ 6407.941345] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802d572fb40 [ 6407.941346] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802d572fb88 [ 6407.941348] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802d572fd80 [ 6407.941349] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802d572fdc8 [ 6407.954547] usblp 1-1.1:1.1: usblp2: USB Bidirectional printer dev 11 if 1 alt 0 proto 2 vid 0x04A9 pid 0x26A3 [ 6407.964638] usblp 1-1.1:1.2: usblp3: USB Bidirectional printer dev 11 if 2 alt 0 proto 2 vid 0x04A9 pid 0x26A3 [ 6412.281620] usblp2: removed [ 6412.281699] usblp3: removed [ 6412.352771] usb 1-1.1: reset high-speed USB device number 11 using xhci_hcd [ 6412.352795] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 16. [ 6412.352798] usb 1-1.1: hub failed to enable device, error -22 [ 6412.428271] usb 1-1.1: reset high-speed USB device number 11 using xhci_hcd [ 6412.428289] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 16. [ 6412.428292] usb 1-1.1: hub failed to enable device, error -22 [ 6412.505304] usb 1-1.1: reset high-speed USB device number 11 using xhci_hcd [ 6412.545446] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88015a25a600 [ 6412.545452] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88015a25a648 [ 6412.545455] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88015a25a690 [ 6412.545457] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802d572fb40 [ 6412.545460] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802d572fb88 [ 6412.545462] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802d572fd80 [ 6412.545464] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802d572fdc8 [ 6412.558655] usblp 1-1.1:1.1: usblp2: USB Bidirectional printer dev 11 if 1 alt 0 proto 2 vid 0x04A9 pid 0x26A3 [ 6412.568752] usblp 1-1.1:1.2: usblp3: USB Bidirectional printer dev 11 if 2 alt 0 proto 2 vid 0x04A9 pid 0x26A3 [ 6412.832930] usblp2: removed [ 6412.833027] usblp3: removed [ 6422.313470] Did not find alt setting 1 for intf 0, config 1 [ 6422.319791] Did not find alt setting 2 for intf 0, config 1 [ 6422.340165] Did not find alt setting 2 for intf 0, config 1 [ 6773.919130] usb 1-1.1: reset high-speed USB device number 11 using xhci_hcd [ 6773.919165] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 16. [ 6773.919173] usb 1-1.1: hub failed to enable device, error -22 [ 6773.994607] usb 1-1.1: reset high-speed USB device number 11 using xhci_hcd [ 6773.994663] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 16. [ 6773.994668] usb 1-1.1: hub failed to enable device, error -22 [ 6774.071614] usb 1-1.1: reset high-speed USB device number 11 using xhci_hcd [ 6774.197339] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88015a25a600 [ 6774.197348] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88015a25a648 [ 6774.197352] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88015a25a690 [ 6774.197355] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802d572fb40 [ 6774.197358] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802d572fb88 [ 6774.197374] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802d572fd80 [ 6774.197375] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802d572fdc8 [ 6774.257806] usblp 1-1.1:1.1: usblp2: USB Bidirectional printer dev 11 if 1 alt 0 proto 2 vid 0x04A9 pid 0x26A3 [ 6774.298248] usblp 1-1.1:1.2: usblp3: USB Bidirectional printer dev 11 if 2 alt 0 proto 2 vid 0x04A9 pid 0x26A3 [ 6778.356952] usblp2: removed [ 6778.357038] usblp3: removed [ 6778.427309] usb 1-1.1: reset high-speed USB device number 11 using xhci_hcd [ 6778.427338] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 16. [ 6778.427341] usb 1-1.1: hub failed to enable device, error -22 [ 6778.504336] usb 1-1.1: reset high-speed USB device number 11 using xhci_hcd [ 6778.504357] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 16. [ 6778.504360] usb 1-1.1: hub failed to enable device, error -22 [ 6778.584490] usb 1-1.1: reset high-speed USB device number 11 using xhci_hcd [ 6778.709766] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88015a25a600 [ 6778.709772] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88015a25a648 [ 6778.709775] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88015a25a690 [ 6778.709778] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802d572fb40 [ 6778.709780] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802d572fb88 [ 6778.709782] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802d572fd80 [ 6778.709785] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802d572fdc8 [ 6778.769192] usblp 1-1.1:1.1: usblp2: USB Bidirectional printer dev 11 if 1 alt 0 proto 2 vid 0x04A9 pid 0x26A3 [ 6778.815687] usblp 1-1.1:1.2: usblp3: USB Bidirectional printer dev 11 if 2 alt 0 proto 2 vid 0x04A9 pid 0x26A3 [ 6784.060252] usblp2: removed [ 6784.060319] usblp3: removed [ 6791.053429] Did not find alt setting 1 for intf 0, config 1 [ 6791.070933] Did not find alt setting 2 for intf 0, config 1 [ 6791.089073] Did not find alt setting 1 for intf 0, config 1 [ 6853.213720] systemd-hostnamed[18098]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 7071.817382] perf interrupt took too long (2524 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [ 9612.949257] systemd-hostnamed[3031]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [10465.210853] init: apport-noui (/var/crash/_usr_lib_x86_64-linux-gnu_pay-service_pay-service.1000.crash) main process (8581) terminated with status 1