[   25.662108] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   25.705277] ip_tables: (C) 2000-2006 Netfilter Core Team
[   25.765852] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   25.794871] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
[   25.988080] Ebtables v2.0 registered
[   26.001209] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   28.005043] wlan0: authenticate with 20:76:00:07:b0:d4
[   28.028538] wlan0: send auth to 20:76:00:07:b0:d4 (try 1/3)
[   28.030676] wlan0: authenticated
[   28.032068] wlan0: associate with 20:76:00:07:b0:d4 (try 1/3)
[   28.034771] wlan0: RX AssocResp from 20:76:00:07:b0:d4 (capab=0x411 status=0 aid=3)
[   28.035511] wlan0: associated
[   28.036061] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   54.804829] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[   54.806990] sd 6:0:0:0: [sdb] Asking for cache data failed
[   54.807002] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[   60.246434] audit_printk_skb: 30 callbacks suppressed
[   60.246439] type=1400 audit(1348818300.934:22): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/local/share/glib-2.0/schemas/gschemas.compiled" pid=2550 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[   98.891650] sd 6:0:0:0: [sdb] 977920 512-byte logical blocks: (500 MB/477 MiB)
[   98.897398] sd 6:0:0:0: [sdb] No Caching mode page present
[   98.897407] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[   98.900240] sd 6:0:0:0: [sdb] No Caching mode page present
[   98.900250] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[   98.901644]  sdb: sdb1
[ 2008.779334] PM: Syncing filesystems ... done.
[ 2008.782946] PM: Preparing system for mem sleep
[ 2008.844340] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 2008.860400] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 2008.876354] PM: Entering mem sleep
[ 2008.876530] Suspending console(s) (use no_console_suspend to debug)
[ 2008.916794] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2009.039734] sd 0:0:0:0: [sda] Stopping disk
[ 2009.064028] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 117.551 msecs
[ 2009.381530] PM: suspend of drv:sd dev:0:0:0:0 complete after 464.742 msecs
[ 2009.381544] PM: suspend of drv:scsi dev:target0:0:0 complete after 464.727 msecs
[ 2009.381557] PM: suspend of drv:scsi dev:host0 complete after 437.237 msecs
[ 2009.381611] PM: suspend of drv: dev:ata1 complete after 437.202 msecs
[ 2009.396028] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 449.798 msecs
[ 2009.396041] PM: suspend of drv: dev:pci0000:00 complete after 449.283 msecs
[ 2009.396052] PM: suspend of devices complete after 519.181 msecs
[ 2009.396054] PM: suspend devices took 0.520 seconds
[ 2009.396260] PM: late suspend of devices complete after 0.201 msecs
[ 2009.556413] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
[ 2009.575937] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
[ 2009.579976] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
[ 2009.583844] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[ 2009.587931] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
[ 2009.604058] uhci_hcd 0000:00:1a.2: wake-up capability enabled by ACPI
[ 2009.608069] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
[ 2009.612216] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[ 2009.612624] PM: noirq suspend of devices complete after 216.361 msecs
[ 2009.612913] ACPI: Preparing to enter system sleep state S3
[ 2009.620796] PM: Saving platform NVS memory
[ 2009.627598] Disabling non-boot CPUs ...
[ 2009.628999] CPU 1 is now offline
[ 2009.629635] Extended CMOS year: 2000
[ 2009.629635] ACPI: Low-level resume complete
[ 2009.629635] PM: Restoring platform NVS memory
[ 2009.629635] Extended CMOS year: 2000
[ 2009.629635] Enabling non-boot CPUs ...
[ 2009.629635] Booting Node 0 Processor 1 APIC 0x1
[ 2009.644065] CPU1 is up
[ 2009.646447] ACPI: Waking up from system sleep state S3
[ 2009.659521] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[ 2009.663965] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
[ 2009.668264] uhci_hcd 0000:00:1a.2: wake-up capability disabled by ACPI
[ 2009.671695] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
[ 2009.675734] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[ 2009.679548] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
[ 2009.683045] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
[ 2009.686791] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
[ 2009.688552] PM: noirq resume of devices complete after 32.832 msecs
[ 2009.689937] PM: early resume of devices complete after 1.341 msecs
[ 2009.690420] i915 0000:00:02.0: setting latency timer to 64
[ 2009.696052] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2009.696079] usb usb3: root hub lost power or was reset
[ 2009.696099] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2009.696125] usb usb4: root hub lost power or was reset
[ 2009.696143] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 2009.696170] usb usb5: root hub lost power or was reset
[ 2009.696189] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2009.696270] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 2009.696344] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2009.696373] usb usb6: root hub lost power or was reset
[ 2009.696391] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2009.696417] usb usb7: root hub lost power or was reset
[ 2009.696436] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2009.696463] usb usb8: root hub lost power or was reset
[ 2009.696483] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2009.696510] pci 0000:00:1e.0: setting latency timer to 64
[ 2009.696528] ahci 0000:00:1f.2: setting latency timer to 64
[ 2009.864172] PM: resume of drv:hub dev:3-0:1.0 complete after 118.197 msecs
[ 2009.864180] PM: resume of drv: dev:ep_00 complete after 118.201 msecs
[ 2009.864185] PM: resume of drv:hub dev:4-0:1.0 complete after 118.161 msecs
[ 2009.864191] PM: resume of drv: dev:ep_00 complete after 118.133 msecs
[ 2009.864196] PM: resume of drv:hub dev:5-0:1.0 complete after 118.100 msecs
[ 2009.864203] PM: resume of drv: dev:ep_00 complete after 118.070 msecs
[ 2009.864208] PM: resume of drv:hub dev:6-0:1.0 complete after 118.035 msecs
[ 2009.864215] PM: resume of drv: dev:ep_00 complete after 118.006 msecs
[ 2009.864220] PM: resume of drv:hub dev:7-0:1.0 complete after 117.971 msecs
[ 2009.864227] PM: resume of drv: dev:ep_00 complete after 117.944 msecs
[ 2009.864232] PM: resume of drv:hub dev:8-0:1.0 complete after 117.911 msecs
[ 2009.864239] PM: resume of drv: dev:ep_00 complete after 117.883 msecs
[ 2009.864245] PM: resume of drv: dev:ep_81 complete after 118.271 msecs
[ 2009.864250] PM: resume of drv: dev:ep_81 complete after 118.209 msecs
[ 2009.864255] PM: resume of drv: dev:ep_81 complete after 118.141 msecs
[ 2009.864261] PM: resume of drv: dev:ep_81 complete after 118.069 msecs
[ 2009.864266] PM: resume of drv: dev:ep_81 complete after 118.000 msecs
[ 2009.864272] PM: resume of drv: dev:ep_81 complete after 117.935 msecs
[ 2009.876041] PM: resume of drv:hub dev:1-0:1.0 complete after 130.112 msecs
[ 2009.876048] PM: resume of drv: dev:ep_00 complete after 130.110 msecs
[ 2009.876053] PM: resume of drv:usb dev:1-5 complete after 129.626 msecs
[ 2009.876075] PM: resume of drv: dev:ep_81 complete after 130.142 msecs
[ 2009.988061] usb 1-5: reset high-speed USB device number 2 using ehci_hcd
[ 2010.016085] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2010.019118] ata2.00: configured for UDMA/100
[ 2010.036100] ata5: SATA link down (SStatus 0 SControl 300)
[ 2010.036108] PM: resume of drv:scsi dev:host1 complete after 290.227 msecs
[ 2010.036123] PM: resume of drv:scsi_host dev:host1 complete after 290.238 msecs
[ 2010.036129] PM: resume of drv:scsi dev:target1:0:0 complete after 289.616 msecs
[ 2010.036151] PM: resume of drv:sr dev:1:0:0:0 complete after 289.621 msecs
[ 2010.036182] PM: resume of drv:scsi_device dev:1:0:0:0 complete after 289.636 msecs
[ 2010.052068] PM: resume of drv:scsi dev:host4 complete after 306.163 msecs
[ 2010.052097] PM: resume of drv:scsi_host dev:host4 complete after 306.188 msecs
[ 2010.056078] ata6: SATA link down (SStatus 0 SControl 300)
[ 2010.072111] PM: resume of drv:scsi dev:host5 complete after 326.197 msecs
[ 2010.072141] PM: resume of drv:scsi_host dev:host5 complete after 326.223 msecs
[ 2010.127759] PM: resume of drv: dev:ep_00 complete after 381.261 msecs
[ 2010.127766] PM: resume of drv:ums-realtek dev:1-5:1.0 complete after 381.319 msecs
[ 2010.127783] PM: resume of drv:scsi dev:host6 complete after 381.222 msecs
[ 2010.127788] PM: resume of drv: dev:ep_01 complete after 381.324 msecs
[ 2010.127795] PM: resume of drv:scsi_host dev:host6 complete after 381.217 msecs
[ 2010.127798] PM: resume of drv: dev:ep_82 complete after 381.317 msecs
[ 2010.127810] PM: resume of drv:scsi dev:target6:0:0 complete after 381.216 msecs
[ 2010.127833] PM: resume of drv:sd dev:6:0:0:0 complete after 381.221 msecs
[ 2010.127866] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 381.238 msecs
[ 2013.144224] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2013.162201] ata1.00: configured for UDMA/133
[ 2013.176251] PM: resume of drv:scsi dev:host0 complete after 3430.379 msecs
[ 2013.176264] PM: resume of drv:scsi_host dev:host0 complete after 3430.389 msecs
[ 2013.176272] PM: resume of drv:scsi dev:target0:0:0 complete after 3429.896 msecs
[ 2013.176281] PM: resume of drv:sd dev:0:0:0:0 complete after 3429.887 msecs
[ 2013.176286] sd 0:0:0:0: [sda] Starting disk
[ 2013.176312] PM: resume of drv:ata_port dev:ata1 complete after 3369.310 msecs
[ 2013.185089] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3438.678 msecs
[ 2013.195416] Extended CMOS year: 2000
[ 2013.380436] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
[ 2018.917622] PM: resume of devices complete after 9227.679 msecs
[ 2018.917906] PM: resume devices took 9.228 seconds
[ 2018.917977] PM: Finishing wakeup.
[ 2018.928637] wlan0: deauthenticated from 20:76:00:07:b0:d4 (Reason: 7)
[ 2018.917979] Restarting tasks ... done.
[ 2018.948602] video LNXVIDEO:01: Restoring backlight state
[ 2018.972772] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2018.972779] cfg80211: Restoring regulatory settings
[ 2018.972783] cfg80211: Calling CRDA to update world regulatory domain
[ 2018.977097] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 2018.977102] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2018.977104] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 2018.977107] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2018.977109] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 2018.977111] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2018.977113] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 2018.977115] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2018.977117] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 2018.977119] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2018.977121] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 2018.977124] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2018.977126] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 2018.977128] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2018.977130] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 2018.977132] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2018.977134] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 2018.977136] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2018.977138] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 2018.977141] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2018.977143] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 2018.977145] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2018.977147] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 2018.977149] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2018.977151] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 2018.977153] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2018.977155] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 2018.977158] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2018.977160] cfg80211: World regulatory domain updated:
[ 2018.977161] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2018.977164] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2018.977166] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2018.977168] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2018.977170] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2018.977172] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2020.213218] wlan0: authenticate with 20:76:00:07:b0:d4
[ 2020.224659] wlan0: send auth to 20:76:00:07:b0:d4 (try 1/3)
[ 2020.226835] wlan0: authenticated
[ 2020.228055] wlan0: associate with 20:76:00:07:b0:d4 (try 1/3)
[ 2020.230931] wlan0: RX AssocResp from 20:76:00:07:b0:d4 (capab=0x411 status=0 aid=3)
[ 2020.231646] wlan0: associated
[12584.140379] CE: hpet increased min_delta_ns to 20113 nsec
[57762.134131] type=1400 audit(1348902185.822:23): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/local/share/glib-2.0/schemas/gschemas.compiled" pid=3303 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[58534.091606] totem[3564] trap int3 ip:7f918c43cc7f sp:7fff04f6c490 error:0
[58534.108162] gnome-shell[3197] trap int3 ip:7f3dd53e1c7f sp:7fff41ceeee0 error:0
[58536.021086] gnome-shell[3594] trap int3 ip:7feeca8f0c7f sp:7fffc60831a0 error:0
[59522.739236] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[59522.769358] JFS: nTxBlock = 8192, nTxLock = 65536
[59522.814976] NTFS driver 2.1.30 [Flags: R/O MODULE].
[59522.861724] QNX4 filesystem 0.2.3 registered.
[59522.941798] Btrfs loaded
[59603.554417] init: anacron main process (27496) killed by TERM signal
[59603.964775] PM: Syncing filesystems ... done.
[59604.010263] PM: Preparing system for mem sleep
[59604.092378] Freezing user space processes ... (elapsed 0.01 seconds) done.
[59604.108391] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[59604.124363] PM: Entering mem sleep
[59604.124533] Suspending console(s) (use no_console_suspend to debug)
[59604.164769] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[59604.223364] sd 0:0:0:0: [sda] Stopping disk
[59604.320029] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 118.129 msecs
[59604.565707] PM: suspend of drv:sd dev:0:0:0:0 complete after 400.941 msecs
[59604.565722] PM: suspend of drv:scsi dev:target0:0:0 complete after 400.894 msecs
[59604.565735] PM: suspend of drv:scsi dev:host0 complete after 365.909 msecs
[59604.565788] PM: suspend of drv: dev:ata1 complete after 365.822 msecs
[59604.580028] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 378.803 msecs
[59604.580040] PM: suspend of drv: dev:pci0000:00 complete after 377.863 msecs
[59604.580052] PM: suspend of devices complete after 455.177 msecs
[59604.580054] PM: suspend devices took 0.456 seconds
[59604.580264] PM: late suspend of devices complete after 0.206 msecs
[59604.740818] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
[59604.760950] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
[59604.765818] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
[59604.770039] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[59604.774077] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
[59604.792733] uhci_hcd 0000:00:1a.2: wake-up capability enabled by ACPI
[59604.797104] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
[59604.801584] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[59604.801992] PM: noirq suspend of devices complete after 221.725 msecs
[59604.802283] ACPI: Preparing to enter system sleep state S3
[59604.811196] PM: Saving platform NVS memory
[59604.818302] Disabling non-boot CPUs ...
[59604.920020] CPU 1 is now offline
[59604.920606] Extended CMOS year: 2000
[59604.920606] ACPI: Low-level resume complete
[59604.920606] PM: Restoring platform NVS memory
[59604.920606] Extended CMOS year: 2000
[59604.920606] Enabling non-boot CPUs ...
[59604.920606] Booting Node 0 Processor 1 APIC 0x1
[59604.936097] CPU1 is up
[59604.938419] ACPI: Waking up from system sleep state S3
[59604.953721] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[59604.958083] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
[59604.961526] uhci_hcd 0000:00:1a.2: wake-up capability disabled by ACPI
[59604.965418] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
[59604.969918] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[59604.973823] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
[59604.978154] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
[59604.981565] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
[59604.983342] PM: noirq resume of devices complete after 34.533 msecs
[59604.984627] PM: early resume of devices complete after 1.238 msecs
[59604.988223] i915 0000:00:02.0: setting latency timer to 64
[59604.988233] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[59604.988262] usb usb3: root hub lost power or was reset
[59604.988281] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[59604.988308] usb usb4: root hub lost power or was reset
[59604.988327] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[59604.988354] usb usb5: root hub lost power or was reset
[59604.988374] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[59604.988455] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[59604.988531] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[59604.988557] usb usb6: root hub lost power or was reset
[59604.988576] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[59604.988602] usb usb7: root hub lost power or was reset
[59604.988620] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[59604.988646] usb usb8: root hub lost power or was reset
[59604.988666] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[59604.988693] pci 0000:00:1e.0: setting latency timer to 64
[59604.988712] ahci 0000:00:1f.2: setting latency timer to 64
[59605.108313] PM: resume of drv:hub dev:3-0:1.0 complete after 116.530 msecs
[59605.108320] PM: resume of drv: dev:ep_00 complete after 116.494 msecs
[59605.108325] PM: resume of drv: dev:ep_81 complete after 116.540 msecs
[59605.108339] PM: resume of drv: dev:ep_00 complete after 116.367 msecs
[59605.108343] PM: resume of drv:hub dev:4-0:1.0 complete after 116.477 msecs
[59605.108345] PM: resume of drv:hub dev:5-0:1.0 complete after 116.406 msecs
[59605.108351] PM: resume of drv:hub dev:6-0:1.0 complete after 116.282 msecs
[59605.108352] PM: resume of drv: dev:ep_00 complete after 116.453 msecs
[59605.108357] PM: resume of drv: dev:ep_00 complete after 116.254 msecs
[59605.108358] PM: resume of drv: dev:ep_81 complete after 116.403 msecs
[59605.108362] PM: resume of drv: dev:ep_81 complete after 116.480 msecs
[59605.108367] PM: resume of drv: dev:ep_81 complete after 116.281 msecs
[59605.112177] PM: resume of drv:hub dev:7-0:1.0 complete after 120.033 msecs
[59605.112181] PM: resume of drv: dev:ep_00 complete after 120.004 msecs
[59605.112184] PM: resume of drv: dev:ep_81 complete after 120.024 msecs
[59605.112187] PM: resume of drv:hub dev:8-0:1.0 complete after 119.972 msecs
[59605.112195] PM: resume of drv: dev:ep_00 complete after 119.943 msecs
[59605.112196] PM: resume of drv: dev:ep_81 complete after 119.961 msecs
[59605.120213] PM: resume of drv:hub dev:1-0:1.0 complete after 128.473 msecs
[59605.120216] PM: resume of drv: dev:ep_00 complete after 128.467 msecs
[59605.120221] PM: resume of drv:usb dev:1-5 complete after 127.902 msecs
[59605.120226] PM: resume of drv: dev:ep_81 complete after 128.482 msecs
[59605.232086] usb 1-5: reset high-speed USB device number 2 using ehci_hcd
[59605.308062] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[59605.311147] ata2.00: configured for UDMA/100
[59605.324081] ata6: SATA link down (SStatus 0 SControl 300)
[59605.328105] PM: resume of drv:scsi dev:host1 complete after 336.412 msecs
[59605.328130] PM: resume of drv:scsi dev:target1:0:0 complete after 335.725 msecs
[59605.328134] PM: resume of drv:scsi_host dev:host1 complete after 336.434 msecs
[59605.328142] PM: resume of drv:sr dev:1:0:0:0 complete after 335.721 msecs
[59605.328174] PM: resume of drv:scsi_device dev:1:0:0:0 complete after 335.736 msecs
[59605.332079] ata5: SATA link down (SStatus 0 SControl 300)
[59605.340103] PM: resume of drv:scsi dev:host5 complete after 348.379 msecs
[59605.340131] PM: resume of drv:scsi_host dev:host5 complete after 348.402 msecs
[59605.348114] PM: resume of drv:scsi dev:host4 complete after 356.398 msecs
[59605.348145] PM: resume of drv:scsi_host dev:host4 complete after 356.425 msecs
[59605.371821] PM: resume of drv: dev:ep_00 complete after 379.434 msecs
[59605.371825] PM: resume of drv:ums-realtek dev:1-5:1.0 complete after 379.489 msecs
[59605.371841] PM: resume of drv: dev:ep_82 complete after 379.472 msecs
[59605.371844] PM: resume of drv: dev:ep_01 complete after 379.490 msecs
[59605.371848] PM: resume of drv:scsi dev:host6 complete after 379.395 msecs
[59605.371863] PM: resume of drv:scsi dev:target6:0:0 complete after 379.375 msecs
[59605.371868] PM: resume of drv:scsi_host dev:host6 complete after 379.398 msecs
[59605.371873] PM: resume of drv:sd dev:6:0:0:0 complete after 379.368 msecs
[59605.371894] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 379.373 msecs
[59608.396255] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[59608.410728] ata1.00: configured for UDMA/133
[59608.424252] PM: resume of drv:scsi dev:host0 complete after 3432.568 msecs
[59608.424265] PM: resume of drv:scsi_host dev:host0 complete after 3432.577 msecs
[59608.424272] PM: resume of drv:scsi dev:target0:0:0 complete after 3432.003 msecs
[59608.424282] PM: resume of drv:sd dev:0:0:0:0 complete after 3431.997 msecs
[59608.424286] sd 0:0:0:0: [sda] Starting disk
[59608.424302] PM: resume of drv:ata_port dev:ata1 complete after 3285.052 msecs
[59608.433572] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3441.271 msecs
[59608.632465] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
[59614.169493] PM: resume of devices complete after 9184.861 msecs
[59614.169756] PM: resume devices took 9.184 seconds
[59614.169830] PM: Finishing wakeup.
[59614.174791] wlan0: deauthenticated from 20:76:00:07:b0:d4 (Reason: 7)
[59614.169831] Restarting tasks ... done.
[59614.194548] video LNXVIDEO:01: Restoring backlight state
[59614.209797] cfg80211: All devices are disconnected, going to restore regulatory settings
[59614.209802] cfg80211: Restoring regulatory settings
[59614.209806] cfg80211: Calling CRDA to update world regulatory domain
[59615.118757] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[59615.118762] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[59615.118765] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[59615.118767] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[59615.118769] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[59615.118771] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[59615.118773] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[59615.118776] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[59615.118778] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[59615.118780] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[59615.118782] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[59615.118784] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[59615.118786] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[59615.118789] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[59615.118791] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[59615.118793] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[59615.118795] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[59615.118797] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[59615.118799] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[59615.118801] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[59615.118803] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[59615.118806] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[59615.118807] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[59615.118810] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[59615.118812] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[59615.118814] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[59615.118816] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[59615.118818] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[59615.118821] cfg80211: World regulatory domain updated:
[59615.118822] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[59615.118825] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[59615.118827] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[59615.118829] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[59615.118831] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[59615.118833] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[59615.448794] wlan0: authenticate with 20:76:00:07:b0:d4
[59615.460683] wlan0: send auth to 20:76:00:07:b0:d4 (try 1/3)
[59615.464572] wlan0: authenticated
[59615.468072] wlan0: associate with 20:76:00:07:b0:d4 (try 1/3)
[59615.471019] wlan0: RX AssocResp from 20:76:00:07:b0:d4 (capab=0x411 status=0 aid=3)
[59615.471755] wlan0: associated
[59918.830370] init: cups main process (760) killed by ABRT signal
[59918.830407] init: cups main process ended, respawning
[59919.138271] type=1400 audit(1348930907.535:24): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=28150 comm="apparmor_parser"
[59919.138933] type=1400 audit(1348930907.535:25): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=28150 comm="apparmor_parser"