[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-45-generic (buildd@phianna) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #74-Ubuntu SMP Tue Jan 13 19:36:28 UTC 2015 (Ubuntu 3.13.0-45.74-generic 3.13.11-ckt13) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-45-generic root=UUID=5cab2c2e-5e53-41fe-ba4d-04e5bf4539e9 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009abeefff] usable [ 0.000000] BIOS-e820: [mem 0x000000009abef000-0x000000009aed4fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009aed5000-0x000000009aeddfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009aede000-0x000000009aeeefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009aeef000-0x000000009af9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009af9f000-0x000000009affefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001dfdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 700Z3A/700Z4A/700Z5A/700Z5B/700Z3A/700Z4A/700Z5A/700Z5B, BIOS 15FD 11/06/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x1dfe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FE0000000 write-back [ 0.000000] 3 base 09C000000 mask FFC000000 uncachable [ 0.000000] 4 base 09B000000 mask FFF000000 uncachable [ 0.000000] 5 base 100000000 mask F80000000 write-back [ 0.000000] 6 base 180000000 mask FC0000000 write-back [ 0.000000] 7 base 1C0000000 mask FE0000000 write-back [ 0.000000] 8 base 1DFE00000 mask FFFE00000 uncachable [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE [ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE [ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x1dfc00000-0x1dfdfffff] [ 0.000000] [mem 0x1dfc00000-0x1dfdfffff] page 2M [ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x1dc000000-0x1dfbfffff] [ 0.000000] [mem 0x1dc000000-0x1dfbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x180000000-0x1dbffffff] [ 0.000000] [mem 0x180000000-0x1dbffffff] page 2M [ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9abeefff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x9a9fffff] page 2M [ 0.000000] [mem 0x9aa00000-0x9abeefff] page 4k [ 0.000000] init_memory_mapping: [mem 0x9afff000-0x9affffff] [ 0.000000] [mem 0x9afff000-0x9affffff] page 4k [ 0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff] [ 0.000000] [mem 0x100000000-0x17fffffff] page 2M [ 0.000000] RAMDISK: [mem 0x35b4a000-0x36d9cfff] [ 0.000000] ACPI: RSDP 00000000000f00e0 000024 (v02 SECCSD) [ 0.000000] ACPI: XSDT 000000009affe170 00009C (v01 SECCSD LH43STAR 00000002 PTEC 00000002) [ 0.000000] ACPI: FACP 000000009afef000 00010C (v05 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: DSDT 000000009aff2000 00844D (v02 SECCSD SNB-CPT 00000000 INTL 20061109) [ 0.000000] ACPI: FACS 000000009af3d000 000040 [ 0.000000] ACPI: SLIC 000000009affd000 000176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001) [ 0.000000] ACPI: SSDT 000000009affb000 001068 (v01 SECCSD PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: ASF! 000000009aff1000 0000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: HPET 000000009afee000 000038 (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: APIC 000000009afed000 000098 (v03 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: MCFG 000000009afec000 00003C (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: TCPA 000000009afeb000 000032 (v02 PTL CRESTLN 06040000 00005A52) [ 0.000000] ACPI: SSDT 000000009afea000 0007C2 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 000000009afe9000 000996 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 000000009afe8000 00003E (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: UEFI 000000009afe7000 000042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: SSDT 000000009afe6000 000A15 (v01 AmdRef AmdTabl 00001000 INTL 20061109) [ 0.000000] ACPI: SSDT 000000009afe5000 000D97 (v01 SgRef SgTabl 00001000 INTL 20061109) [ 0.000000] ACPI: UEFI 000000009afe4000 000256 (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001dfdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1dfdfffff] [ 0.000000] NODE_DATA [mem 0x1dfdf6000-0x1dfdfafff] [ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff8801d9400000-ffff8801df3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x1dfdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x9abeefff] [ 0.000000] node 0: [mem 0x9afff000-0x9affffff] [ 0.000000] node 0: [mem 0x100000000-0x1dfdfffff] [ 0.000000] On node 0 totalpages: 1550732 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 156 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9840 pages used for memmap [ 0.000000] DMA32 zone: 629744 pages, LIFO batch:31 [ 0.000000] Normal zone: 14328 pages used for memmap [ 0.000000] Normal zone: 916992 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9abef000-0x9aed4fff] [ 0.000000] PM: Registered nosave memory: [mem 0x9aed5000-0x9aeddfff] [ 0.000000] PM: Registered nosave memory: [mem 0x9aede000-0x9aeeefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9aeef000-0x9af9efff] [ 0.000000] PM: Registered nosave memory: [mem 0x9af9f000-0x9affefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff] [ 0.000000] e820: [mem 0x9fa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8801dfa00000 s82368 r8192 d24128 u262144 [ 0.000000] pcpu-alloc: s82368 r8192 d24128 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1526344 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-45-generic root=UUID=5cab2c2e-5e53-41fe-ba4d-04e5bf4539e9 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 6001692K/6202928K available (7383K kernel code, 1145K rwdata, 3408K rodata, 1336K init, 1444K bss, 201236K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 25165824 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2494.194 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.38 BogoMIPS (lpj=9976776) [ 0.000005] pid_max: default: 32768 minimum: 301 [ 0.000029] Security Framework initialized [ 0.000046] AppArmor: AppArmor initialized [ 0.000047] Yama: becoming mindful. [ 0.000589] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002167] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.002849] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002880] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.003070] Initializing cgroup subsys memory [ 0.003075] Initializing cgroup subsys devices [ 0.003077] Initializing cgroup subsys freezer [ 0.003078] Initializing cgroup subsys blkio [ 0.003079] Initializing cgroup subsys perf_event [ 0.003081] Initializing cgroup subsys hugetlb [ 0.003100] Disabled fast string operations [ 0.003101] CPU: Physical Processor ID: 0 [ 0.003102] CPU: Processor Core ID: 0 [ 0.003107] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.003107] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.003109] mce: CPU supports 7 MCE banks [ 0.003120] CPU0: Thermal monitoring enabled (TM1) [ 0.003129] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.003129] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.003129] tlb_flushall_shift: 5 [ 0.003234] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000) [ 0.004255] ACPI: Core revision 20131115 [ 0.009141] ACPI: All ACPI Tables successfully acquired [ 0.026402] ftrace: allocating 28554 entries in 112 pages [ 0.039722] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.079451] smpboot: CPU0: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz (fam: 06, model: 2a, stepping: 07) [ 0.079459] TSC deadline timer enabled [ 0.079471] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.079478] ... version: 3 [ 0.079479] ... bit width: 48 [ 0.079480] ... generic registers: 4 [ 0.079480] ... value mask: 0000ffffffffffff [ 0.079481] ... max period: 0000ffffffffffff [ 0.079482] ... fixed-purpose events: 3 [ 0.079483] ... event mask: 000000070000000f [ 0.080972] x86: Booting SMP configuration: [ 0.092021] Disabled fast string operations [ 0.094218] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.105248] Disabled fast string operations [ 0.118482] Disabled fast string operations [ 0.080974] .... node #0, CPUs: #1 #2 #3 [ 0.120610] x86: Booted up 1 node, 4 CPUs [ 0.120613] smpboot: Total of 4 processors activated (19953.55 BogoMIPS) [ 0.123770] devtmpfs: initialized [ 0.126101] EVM: security.selinux [ 0.126103] EVM: security.SMACK64 [ 0.126103] EVM: security.ima [ 0.126104] EVM: security.capability [ 0.126147] PM: Registering ACPI NVS region [mem 0x9aed5000-0x9aeddfff] (36864 bytes) [ 0.126150] PM: Registering ACPI NVS region [mem 0x9aeef000-0x9af9efff] (720896 bytes) [ 0.126824] pinctrl core: initialized pinctrl subsystem [ 0.126874] regulator-dummy: no parameters [ 0.126907] RTC time: 10:38:36, date: 02/07/15 [ 0.126935] NET: Registered protocol family 16 [ 0.127025] cpuidle: using governor ladder [ 0.127026] cpuidle: using governor menu [ 0.127059] ACPI: bus type PCI registered [ 0.127061] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.127116] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.127118] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.131845] PCI: Using configuration type 1 for base access [ 0.131983] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.131984] mtrr: probably your BIOS does not setup all CPUs. [ 0.131985] mtrr: corrected configuration. [ 0.132642] bio: create slab at 0 [ 0.132773] ACPI: Added _OSI(Module Device) [ 0.132775] ACPI: Added _OSI(Processor Device) [ 0.132776] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.132777] ACPI: Added _OSI(Processor Aggregator Device) [ 0.135158] ACPI: Executed 1 blocks of module-level executable AML code [ 0.148725] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.153615] ACPI: SSDT 000000009aee0718 000670 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.153919] ACPI: Dynamic OEM Table Load: [ 0.153921] ACPI: SSDT (null) 000670 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.156919] ACPI: SSDT 000000009aee1a98 000303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.157243] ACPI: Dynamic OEM Table Load: [ 0.157245] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.160817] ACPI: SSDT 000000009aedfd98 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.161115] ACPI: Dynamic OEM Table Load: [ 0.161116] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.168023] ACPI: Interpreter enabled [ 0.168034] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.168045] ACPI: (supports S0 S1 S3 S4 S5) [ 0.168046] ACPI: Using IOAPIC for interrupt routing [ 0.168068] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.168192] ACPI: No dock devices found. [ 0.178350] ACPI: Power Resource [FN00] (off) [ 0.178420] ACPI: Power Resource [FN01] (off) [ 0.178484] ACPI: Power Resource [FN02] (off) [ 0.178550] ACPI: Power Resource [FN03] (off) [ 0.178615] ACPI: Power Resource [FN04] (off) [ 0.179143] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.179149] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.179316] \_SB_.PCI0:_OSC invalid UUID [ 0.179317] _OSC request data:1 1f 0 [ 0.179320] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.179913] PCI host bridge to bus 0000:00 [ 0.179916] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.179918] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.179919] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.179921] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.179923] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff] [ 0.179925] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 0.179933] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.180009] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 [ 0.180038] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.180075] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.180113] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000 [ 0.180123] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit] [ 0.180128] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.180132] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 0.180253] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.180290] pci 0000:00:16.0: reg 0x10: [mem 0xc0805000-0xc080500f 64bit] [ 0.180410] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.180510] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.180543] pci 0000:00:1a.0: reg 0x10: [mem 0xc080a000-0xc080a3ff] [ 0.180688] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.180778] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.180807] pci 0000:00:1b.0: reg 0x10: [mem 0xc0800000-0xc0803fff 64bit] [ 0.180937] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.180987] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.181021] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.181155] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.181208] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.181244] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.181379] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.181430] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.181463] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.181598] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.181692] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.181724] pci 0000:00:1d.0: reg 0x10: [mem 0xc0809000-0xc08093ff] [ 0.181870] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.181948] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 [ 0.182160] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.182198] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f] [ 0.182213] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097] [ 0.182227] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087] [ 0.182242] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093] [ 0.182256] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f] [ 0.182271] pci 0000:00:1f.2: reg 0x24: [mem 0xc0808000-0xc08087ff] [ 0.182362] pci 0000:00:1f.2: PME# supported from D3hot [ 0.182435] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.182464] pci 0000:00:1f.3: reg 0x10: [mem 0xc0804000-0xc08040ff 64bit] [ 0.182503] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.182636] pci 0000:01:00.0: [1002:6760] type 00 class 0x030000 [ 0.182649] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref] [ 0.182660] pci 0000:01:00.0: reg 0x18: [mem 0xc0700000-0xc071ffff 64bit] [ 0.182667] pci 0000:01:00.0: reg 0x20: [io 0x3000-0x30ff] [ 0.182680] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 0.182713] pci 0000:01:00.0: supports D1 D2 [ 0.182730] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.188779] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.188787] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.188793] pci 0000:00:01.0: bridge window [mem 0xc0700000-0xc07fffff] [ 0.188802] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref] [ 0.188999] pci 0000:02:00.0: [14e4:4357] type 00 class 0x028000 [ 0.189045] pci 0000:02:00.0: reg 0x10: [mem 0xc0600000-0xc0603fff 64bit] [ 0.189285] pci 0000:02:00.0: supports D1 D2 [ 0.189287] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.189342] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.196839] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.196855] pci 0000:00:1c.0: bridge window [mem 0xc0600000-0xc06fffff] [ 0.197068] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.197143] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff] [ 0.197275] pci 0000:03:00.0: reg 0x18: [mem 0xc0404000-0xc0404fff 64bit pref] [ 0.197356] pci 0000:03:00.0: reg 0x20: [mem 0xc0400000-0xc0403fff 64bit pref] [ 0.197718] pci 0000:03:00.0: supports D1 D2 [ 0.197719] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.197842] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.204859] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.204869] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.204890] pci 0000:00:1c.3: bridge window [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.205065] pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330 [ 0.205111] pci 0000:04:00.0: reg 0x10: [mem 0xc0500000-0xc0507fff 64bit] [ 0.205346] pci 0000:04:00.0: PME# supported from D3hot D3cold [ 0.212873] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.212889] pci 0000:00:1c.4: bridge window [mem 0xc0500000-0xc05fffff] [ 0.213779] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.213827] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.213874] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.213919] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 10 11 12 14 15) [ 0.213963] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 10 11 12 14 15) [ 0.214007] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.214053] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.214097] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.214577] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.214583] ACPI: \_SB_.PCI0: notify handler is installed [ 0.214630] Found 1 acpi root devices [ 0.214665] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.214810] ACPI : EC: 0 stale EC events cleared [ 0.214933] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.214935] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.214940] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none [ 0.214941] vgaarb: loaded [ 0.214942] vgaarb: bridge control possible 0000:01:00.0 [ 0.214943] vgaarb: no bridge control possible 0000:00:02.0 [ 0.215071] SCSI subsystem initialized [ 0.215119] libata version 3.00 loaded. [ 0.215137] ACPI: bus type USB registered [ 0.215151] usbcore: registered new interface driver usbfs [ 0.215157] usbcore: registered new interface driver hub [ 0.215178] usbcore: registered new device driver usb [ 0.215265] PCI: Using ACPI for IRQ routing [ 0.218135] PCI: pci_cache_line_size set to 64 bytes [ 0.218239] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.218241] e820: reserve RAM buffer [mem 0x9abef000-0x9bffffff] [ 0.218242] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff] [ 0.218243] e820: reserve RAM buffer [mem 0x1dfe00000-0x1dfffffff] [ 0.218312] NetLabel: Initializing [ 0.218314] NetLabel: domain hash size = 128 [ 0.218314] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.218325] NetLabel: unlabeled traffic allowed by default [ 0.218381] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.218385] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.220423] Switched to clocksource hpet [ 0.224300] AppArmor: AppArmor Filesystem Enabled [ 0.224323] pnp: PnP ACPI init [ 0.224337] ACPI: bus type PNP registered [ 0.224671] pnp 00:00: [dma 4] [ 0.224689] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.224707] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.224780] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.224807] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.224847] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.224849] system 00:04: [io 0x1000-0x100f] has been reserved [ 0.224851] system 00:04: [io 0x5000-0x5003] has been reserved [ 0.224853] system 00:04: [io 0xffff] has been reserved [ 0.224855] system 00:04: [io 0x0400-0x0453] could not be reserved [ 0.224857] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.224858] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.224860] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 0.224861] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.224863] system 00:04: [io 0x5000-0x500f] could not be reserved [ 0.224865] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.224889] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.224929] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.224932] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.224956] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.224993] pnp 00:08: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active) [ 0.225039] pnp 00:09: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.225146] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.225148] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.225149] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.225151] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.225152] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.225154] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.225155] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.225157] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.225159] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved [ 0.225160] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.225162] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.225610] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.225630] pnp: PnP ACPI: found 12 devices [ 0.225631] ACPI: bus type PNP unregistered [ 0.232040] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] [ 0.232087] pci 0000:01:00.0: BAR 6: assigned [mem 0xc0720000-0xc073ffff pref] [ 0.232090] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.232092] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.232095] pci 0000:00:01.0: bridge window [mem 0xc0700000-0xc07fffff] [ 0.232097] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref] [ 0.232100] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.232107] pci 0000:00:1c.0: bridge window [mem 0xc0600000-0xc06fffff] [ 0.232121] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.232124] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.232135] pci 0000:00:1c.3: bridge window [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.232143] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.232151] pci 0000:00:1c.4: bridge window [mem 0xc0500000-0xc05fffff] [ 0.232165] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.232166] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.232168] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.232169] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff] [ 0.232171] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.232172] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.232174] pci_bus 0000:01: resource 1 [mem 0xc0700000-0xc07fffff] [ 0.232175] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref] [ 0.232177] pci_bus 0000:02: resource 1 [mem 0xc0600000-0xc06fffff] [ 0.232178] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 0.232180] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.232181] pci_bus 0000:04: resource 1 [mem 0xc0500000-0xc05fffff] [ 0.232206] NET: Registered protocol family 2 [ 0.232409] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.232577] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.232701] TCP: Hash tables configured (established 65536 bind 65536) [ 0.232727] TCP: reno registered [ 0.232738] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.232768] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.232837] NET: Registered protocol family 1 [ 0.232852] pci 0000:00:02.0: Video device with shadowed ROM [ 0.233332] PCI: CLS 64 bytes, default 64 [ 0.233388] Trying to unpack rootfs image as initramfs... [ 0.520320] Freeing initrd memory: 18764K (ffff880035b4a000 - ffff880036d9d000) [ 0.520325] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.520327] software IO TLB [mem 0x96bef000-0x9abef000] (64MB) mapped at [ffff880096bef000-ffff88009abeefff] [ 0.520531] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28 [ 0.520537] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28 [ 0.520546] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28 [ 0.520554] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28 [ 0.520605] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.520606] Scanning for low memory corruption every 60 seconds [ 0.520882] Initialise system trusted keyring [ 0.520920] audit: initializing netlink socket (disabled) [ 0.520929] type=2000 audit(1423305516.504:1): initialized [ 0.545905] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.546800] zbud: loaded [ 0.546943] VFS: Disk quotas dquot_6.5.2 [ 0.546977] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.547316] fuse init (API version 7.22) [ 0.547381] msgmni has been set to 11758 [ 0.547425] Key type big_key registered [ 0.547919] Key type asymmetric registered [ 0.547921] Asymmetric key parser 'x509' registered [ 0.547947] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.547993] io scheduler noop registered [ 0.547996] io scheduler deadline registered (default) [ 0.548017] io scheduler cfq registered [ 0.548170] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.548516] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.548530] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.548558] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 0.548559] vesafb: scrolling: redraw [ 0.548560] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.548821] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90004e80000, using 3072k, total 3072k [ 0.600801] Console: switching to colour frame buffer device 128x48 [ 0.652736] fb0: VESA VGA frame buffer device [ 0.652748] intel_idle: MWAIT substates: 0x21120 [ 0.652749] intel_idle: v0.4 model 0x2A [ 0.652750] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.652833] ipmi message handler version 39.2 [ 0.653071] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.653371] ACPI: AC Adapter [ADP1] (off-line) [ 0.653445] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.653683] ACPI: Lid Switch [LID0] [ 0.653713] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.653717] ACPI: Power Button [PWRB] [ 0.653741] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.653743] ACPI: Power Button [PWRF] [ 0.653974] ACPI: Fan [FAN0] (off) [ 0.653995] ACPI: Fan [FAN1] (off) [ 0.654013] ACPI: Fan [FAN2] (off) [ 0.654032] ACPI: Fan [FAN3] (off) [ 0.654050] ACPI: Fan [FAN4] (off) [ 0.655774] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.655776] ACPI: Thermal Zone [TZ00] (40 C) [ 0.655929] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.655931] ACPI: Thermal Zone [TZ01] (30 C) [ 0.655951] GHES: HEST is not enabled! [ 0.656029] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.658709] Linux agpgart interface v0.103 [ 0.658803] tpm_tis 00:09: 1.2 TPM (device-id 0xB, rev-id 16) [ 0.661512] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.661516] ACPI: Battery Slot [BAT1] (battery present) [ 0.873289] tpm_tis 00:09: TPM is disabled/deactivated (0x7) [ 0.875433] brd: module loaded [ 0.876045] loop: module loaded [ 0.876317] libphy: Fixed MDIO Bus: probed [ 0.876381] tun: Universal TUN/TAP device driver, 1.6 [ 0.876382] tun: (C) 1999-2004 Max Krasnyansky [ 0.876431] PPP generic driver version 2.4.2 [ 0.876475] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.876481] ehci-pci: EHCI PCI platform driver [ 0.876588] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.876592] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.876611] ehci-pci 0000:00:1a.0: debug port 2 [ 0.880510] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.880527] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc080a000 [ 0.889207] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.889242] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.889243] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.889245] usb usb1: Product: EHCI Host Controller [ 0.889246] usb usb1: Manufacturer: Linux 3.13.0-45-generic ehci_hcd [ 0.889247] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.889347] hub 1-0:1.0: USB hub found [ 0.889355] hub 1-0:1.0: 2 ports detected [ 0.889504] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.889508] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.889525] ehci-pci 0000:00:1d.0: debug port 2 [ 0.893433] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.893446] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc0809000 [ 0.905224] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.905250] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.905251] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.905252] usb usb2: Product: EHCI Host Controller [ 0.905254] usb usb2: Manufacturer: Linux 3.13.0-45-generic ehci_hcd [ 0.905255] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.905350] hub 2-0:1.0: USB hub found [ 0.905355] hub 2-0:1.0: 2 ports detected [ 0.905418] ehci-platform: EHCI generic platform driver [ 0.905424] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.905425] ohci-pci: OHCI PCI platform driver [ 0.905431] ohci-platform: OHCI generic platform driver [ 0.905435] uhci_hcd: USB Universal Host Controller Interface driver [ 0.905508] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 0.905513] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 [ 0.968722] xhci_hcd 0000:04:00.0: irq 41 for MSI/MSI-X [ 0.968727] xhci_hcd 0000:04:00.0: irq 42 for MSI/MSI-X [ 0.968733] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X [ 0.968737] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X [ 0.968741] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X [ 0.968872] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.968873] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.968875] usb usb3: Product: xHCI Host Controller [ 0.968876] usb usb3: Manufacturer: Linux 3.13.0-45-generic xhci_hcd [ 0.968877] usb usb3: SerialNumber: 0000:04:00.0 [ 0.968987] hub 3-0:1.0: USB hub found [ 0.968998] hub 3-0:1.0: 2 ports detected [ 0.969061] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 0.969063] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4 [ 0.969116] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.969117] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.969118] usb usb4: Product: xHCI Host Controller [ 0.969120] usb usb4: Manufacturer: Linux 3.13.0-45-generic xhci_hcd [ 0.969121] usb usb4: SerialNumber: 0000:04:00.0 [ 0.969227] hub 4-0:1.0: USB hub found [ 0.969237] hub 4-0:1.0: 2 ports detected [ 0.977365] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12 [ 0.980813] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.980818] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.981035] mousedev: PS/2 mouse device common for all mice [ 0.981393] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.981427] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.981478] device-mapper: uevent: version 1.0.3 [ 0.981557] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 0.981563] ledtrig-cpu: registered to indicate activity on CPUs [ 0.981646] TCP: cubic registered [ 0.981710] NET: Registered protocol family 10 [ 0.981848] NET: Registered protocol family 17 [ 0.981857] Key type dns_resolver registered [ 0.982195] Loading compiled-in X.509 certificates [ 0.983073] Loaded X.509 cert 'Magrathea: Glacier signing key: 34992139f3da40b620bd5517597ba85af5797c9a' [ 0.983087] registered taskstats version 1 [ 0.985053] Key type trusted registered [ 0.986556] Key type encrypted registered [ 0.988036] AppArmor: AppArmor sha1 policy hashing enabled [ 1.016294] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.033512] tpm_tis 00:09: A TPM error (7) occurred attempting to read a pcr value [ 1.033516] IMA: No TPM chip found, activating TPM-bypass! [ 1.033982] regulator-dummy: disabling [ 1.034183] Magic number: 3:141:628 [ 1.034310] rtc_cmos 00:05: setting system clock to 2015-02-07 10:38:37 UTC (1423305517) [ 1.034915] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.034917] EDD information not available. [ 1.034952] PM: Hibernation image not present or could not be loaded. [ 1.036316] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000) [ 1.036318] Write protecting the kernel read-only data: 12288k [ 1.038304] Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000) [ 1.039875] Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000) [ 1.050686] systemd-udevd[123]: starting version 204 [ 1.078943] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.078956] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.079242] r8169 0000:03:00.0: irq 46 for MSI/MSI-X [ 1.079452] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c68000, 18:67:b0:4e:f6:f9, XID 0c900800 IRQ 46 [ 1.079455] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.079517] ahci 0000:00:1f.2: version 3.0 [ 1.079649] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X [ 1.079689] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.079754] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1f impl SATA mode [ 1.079756] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst [ 1.113981] scsi0 : ahci [ 1.114129] scsi1 : ahci [ 1.114266] scsi2 : ahci [ 1.114412] scsi3 : ahci [ 1.114553] scsi4 : ahci [ 1.114680] scsi5 : ahci [ 1.114726] ata1: SATA max UDMA/133 abar m2048@0xc0808000 port 0xc0808100 irq 47 [ 1.114729] ata2: SATA max UDMA/133 abar m2048@0xc0808000 port 0xc0808180 irq 47 [ 1.114732] ata3: SATA max UDMA/133 abar m2048@0xc0808000 port 0xc0808200 irq 47 [ 1.114734] ata4: SATA max UDMA/133 abar m2048@0xc0808000 port 0xc0808280 irq 47 [ 1.114737] ata5: SATA max UDMA/133 abar m2048@0xc0808000 port 0xc0808300 irq 47 [ 1.114738] ata6: DUMMY [ 1.201639] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.334386] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.334400] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.334665] hub 1-1:1.0: USB hub found [ 1.334716] hub 1-1:1.0: 6 ports detected [ 1.433966] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.434383] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.434386] ata1.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0BB0Q, max UDMA/133 [ 1.434387] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.434750] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.434754] ata1.00: configured for UDMA/133 [ 1.435032] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 EXT0 PQ: 0 ANSI: 5 [ 1.435167] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.435202] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.435228] sd 0:0:0:0: [sda] Write Protect is off [ 1.435231] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.435258] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.436529] sda: sda1 sda2 < sda5 > [ 1.436833] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.445953] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.518025] tsc: Refined TSC clocksource calibration: 2494.335 MHz [ 1.578662] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.578676] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.578951] hub 2-1:1.0: USB hub found [ 1.578996] hub 2-1:1.0: 6 ports detected [ 1.650406] usb 1-1.4: new high-speed USB device number 3 using ehci-pci [ 1.754291] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.755120] ata2.00: ATA-8: SanDisk iSSD P4 8GB, SSD 9.14, max UDMA/133 [ 1.755131] ata2.00: 15649200 sectors, multi 1: LBA48 [ 1.755781] ata2.00: configured for UDMA/133 [ 1.756037] scsi 1:0:0:0: Direct-Access ATA SanDisk iSSD P4 SSD PQ: 0 ANSI: 5 [ 1.756178] sd 1:0:0:0: [sdb] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 1.756224] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.756234] sd 1:0:0:0: [sdb] Write Protect is off [ 1.756237] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.756267] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.756907] sdb: sdb1 [ 1.757178] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.903001] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1018 [ 1.903012] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.903018] usb 1-1.4: Product: WebCam SC-13HDL11431N [ 1.903022] usb 1-1.4: Manufacturer: 123 [ 1.985630] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x461f07) [ 2.001872] psmouse serio1: elantech: Synaptics capabilities query result 0x11, 0x14, 0x0e. [ 2.074678] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.076609] ata3.00: ATAPI: MATSHITADVD-RAM UJ8A7AS, 1.00, max UDMA/100 [ 2.079293] ata3.00: configured for UDMA/100 [ 2.082540] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5 [ 2.083265] scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8A7AS 1.00 PQ: 0 ANSI: 5 [ 2.086726] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy [ 2.086729] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.086837] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 2.086981] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 2.146972] usb 2-1.2: new high-speed USB device number 3 using ehci-pci [ 2.239424] usb 2-1.2: New USB device found, idVendor=0409, idProduct=005a [ 2.239428] usb 2-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.239815] hub 2-1.2:1.0: USB hub found [ 2.239866] hub 2-1.2:1.0: 4 ports detected [ 2.311157] usb 2-1.3: new full-speed USB device number 4 using ehci-pci [ 2.407008] ata4: SATA link down (SStatus 0 SControl 300) [ 2.408618] usb 2-1.3: New USB device found, idVendor=0a5c, idProduct=219a [ 2.408627] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.408633] usb 2-1.3: Product: Broadcom Bluetooth Device [ 2.408638] usb 2-1.3: Manufacturer: Broadcom Corp [ 2.408642] usb 2-1.3: SerialNumber: E0CA949F6C41 [ 2.519382] Switched to clocksource tsc [ 2.527395] usb 2-1.2.1: new low-speed USB device number 5 using ehci-pci [ 2.640153] usb 2-1.2.1: New USB device found, idVendor=046d, idProduct=c05a [ 2.640164] usb 2-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.640169] usb 2-1.2.1: Product: USB Optical Mouse [ 2.640174] usb 2-1.2.1: Manufacturer: Logitech [ 2.643832] hidraw: raw HID events driver (C) Jiri Kosina [ 2.647587] usbcore: registered new interface driver usbhid [ 2.647590] usbhid: USB HID core driver [ 2.648968] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.1/2-1.2.1:1.0/input/input6 [ 2.649077] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.2.1/input0 [ 2.727430] ata5: SATA link down (SStatus 0 SControl 300) [ 2.727578] usb 2-1.2.2: new low-speed USB device number 6 using ehci-pci [ 2.789421] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 2.854635] usb 2-1.2.2: New USB device found, idVendor=05af, idProduct=0802 [ 2.854639] usb 2-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.854641] usb 2-1.2.2: Product: USB Keyboard [ 2.854642] usb 2-1.2.2: Manufacturer: [ 2.864717] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.2/2-1.2.2:1.0/input/input7 [ 2.864802] hid-generic 0003:05AF:0802.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.0-1.2.2/input0 [ 2.882304] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.2/2-1.2.2:1.1/input/input8 [ 2.882396] hid-generic 0003:05AF:0802.0003: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.0-1.2.2/input1 [ 2.967770] usb 2-1.2.3: new high-speed USB device number 7 using ehci-pci [ 3.077379] usb 2-1.2.3: New USB device found, idVendor=03f0, idProduct=002a [ 3.077390] usb 2-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.077395] usb 2-1.2.3: Product: HP LaserJet Professional P1102 [ 3.077400] usb 2-1.2.3: Manufacturer: Hewlett-Packard [ 3.077404] usb 2-1.2.3: SerialNumber: 000000000Q817NSKPR1a [ 3.127484] random: init urandom read with 77 bits of entropy available [ 3.242042] init: plymouth-upstart-bridge main process (195) terminated with status 1 [ 3.242053] init: plymouth-upstart-bridge main process ended, respawning [ 3.243807] init: plymouth-upstart-bridge main process (206) terminated with status 1 [ 3.243816] init: plymouth-upstart-bridge main process ended, respawning [ 3.245373] init: plymouth-upstart-bridge main process (208) terminated with status 1 [ 3.245382] init: plymouth-upstart-bridge main process ended, respawning [ 3.247147] init: plymouth-upstart-bridge main process (209) terminated with status 1 [ 3.247160] init: plymouth-upstart-bridge main process ended, respawning [ 3.249458] init: plymouth-upstart-bridge main process (211) terminated with status 1 [ 3.249472] init: plymouth-upstart-bridge main process ended, respawning [ 3.251585] init: plymouth-upstart-bridge main process (213) terminated with status 1 [ 3.251597] init: plymouth-upstart-bridge main process ended, respawning [ 3.253484] init: plymouth-upstart-bridge main process (215) terminated with status 1 [ 3.253493] init: plymouth-upstart-bridge main process ended, respawning [ 3.255281] init: plymouth-upstart-bridge main process (217) terminated with status 1 [ 3.255296] init: plymouth-upstart-bridge main process ended, respawning [ 3.257028] init: plymouth-upstart-bridge main process (219) terminated with status 1 [ 3.257038] init: plymouth-upstart-bridge main process ended, respawning [ 3.258832] init: plymouth-upstart-bridge main process (220) terminated with status 1 [ 3.258846] init: plymouth-upstart-bridge main process ended, respawning [ 3.695942] Adding 8003580k swap on /dev/sda1. Priority:-1 extents:1 across:8003580k SSFS [ 3.720987] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3.797084] systemd-udevd[327]: starting version 204 [ 3.840714] random: nonblocking pool is initialized [ 3.857383] lp: driver loaded but no devices found [ 3.862088] ppdev: user-space parallel port driver [ 3.883641] [drm] Initialized drm 1.1.0 20060810 [ 3.887545] wmi: Mapper loaded [ 3.903235] [drm] Memory usable by graphics device = 2048M [ 3.903240] checking generic (b0000000 300000) vs hw (b0000000 10000000) [ 3.903243] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 3.903261] Console: switching to colour dummy device 80x25 [ 3.940812] bcma: bus0: Found chip with id 0xA8D9, rev 0x01 and package 0x0A [ 3.940851] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0) [ 3.940881] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0) [ 3.940940] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0) [ 3.953026] i915 0000:00:02.0: irq 48 for MSI/MSI-X [ 3.953039] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.953040] [drm] Driver supports precise vblank timestamp query. [ 3.954098] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8801d54ab288 (20131115/exresop-590) [ 3.954104] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20131115/dswexec-461) [ 3.954110] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff8801d68ee000), AE_AML_OPERAND_TYPE (20131115/psparse-536) [ 3.954183] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none [ 3.964188] [drm] radeon kernel modesetting enabled. [ 3.964205] VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle [ 3.964268] radeon 0000:01:00.0: enabling device (0006 -> 0007) [ 3.980415] bcma: bus0: Bus registered [ 3.981074] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 3.981077] [drm] This can cause pipe underruns and display issues. [ 3.981078] [drm] Please upgrade your BIOS to fix this. [ 3.993231] systemd-udevd[354]: renamed network interface eth0 to eth1 [ 4.077535] type=1400 audit(1423305520.535:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=440 comm="apparmor_parser" [ 4.077543] type=1400 audit(1423305520.535:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=440 comm="apparmor_parser" [ 4.077548] type=1400 audit(1423305520.535:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=440 comm="apparmor_parser" [ 4.078234] type=1400 audit(1423305520.535:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=440 comm="apparmor_parser" [ 4.078241] type=1400 audit(1423305520.535:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=440 comm="apparmor_parser" [ 4.078525] type=1400 audit(1423305520.535:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=440 comm="apparmor_parser" [ 4.081168] fbcon: inteldrmfb (fb0) is primary device [ 4.085028] init: usb-modeswitch-upstart main process (478) terminated with status 1 [ 4.102666] WARNING! power/level is deprecated; use power/control instead [ 4.112542] Bluetooth: Core ver 2.17 [ 4.112559] NET: Registered protocol family 31 [ 4.112559] Bluetooth: HCI device and connection manager initialized [ 4.112566] Bluetooth: HCI socket layer initialized [ 4.112568] Bluetooth: L2CAP socket layer initialized [ 4.112573] Bluetooth: SCO socket layer initialized [ 4.115173] usbcore: registered new interface driver btusb [ 4.146005] Linux video capture interface: v2.00 [ 4.155772] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018) [ 4.175037] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input9 [ 4.175154] usbcore: registered new interface driver uvcvideo [ 4.175155] USB Video Class driver (1.1.1) [ 4.191656] samsung_laptop: detected SABI interface: SwSmi@ [ 4.191657] samsung_laptop: Backlight controlled by ACPI video driver [ 4.265904] cfg80211: Calling CRDA to update world regulatory domain [ 4.290776] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1 [ 4.290779] b43: probe of bcma0:0 failed with error -524 [ 4.290838] Broadcom 43xx driver loaded [ Features: PNL ] [ 4.300461] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 16 [ 4.305964] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 4.306267] ieee80211 phy0: registered radio enabled led device: brcmsmac-phy0:radio gpio: 241 [ 4.349246] systemd-udevd[362]: renamed network interface wlan0 to wlan1 [ 4.413308] cfg80211: World regulatory domain updated: [ 4.413309] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4.413311] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4.413311] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4.413312] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4.413312] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4.413313] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4.413323] cfg80211: Calling CRDA for country: US [ 4.415243] cfg80211: Regulatory domain changed to country: US [ 4.415244] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4.415245] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 4.415246] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 4.415246] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4.415247] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4.415247] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4.415248] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 4.415249] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 5.194183] Console: switching to colour frame buffer device 200x56 [ 5.197526] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 5.197528] i915 0000:00:02.0: registered panic notifier [ 5.197769] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS [ 5.219092] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no) [ 5.219728] acpi device:2e: registered as cooling_device10 [ 5.219789] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2c/LNXVIDEO:00/input/input10 [ 5.223106] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 5.223703] acpi device:3b: registered as cooling_device11 [ 5.223800] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11 [ 5.223945] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 5.224069] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251) [ 5.224076] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.224084] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 5.224088] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20131115/utaddress-251) [ 5.224091] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.224093] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 5.224096] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20131115/utaddress-251) [ 5.224100] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.224101] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 5.224104] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20131115/utaddress-251) [ 5.224108] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.224109] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 5.224293] mei_me 0000:00:16.0: irq 49 for MSI/MSI-X [ 5.224727] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6760 0x144D:0xC0B3). [ 5.224755] [drm] register mmio base: 0xC0700000 [ 5.224757] [drm] register mmio size: 131072 [ 5.224759] vga_switcheroo: enabled [ 5.224834] ATPX version 1, functions 0x00000031 [ 5.260544] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 5.385733] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE [ 5.482547] usblp 2-1.2.3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x03F0 pid 0x002A [ 5.482588] usbcore: registered new interface driver usblp [ 5.483828] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X [ 5.496946] SKU: Nid=0x1d sku_cfg=0x4004820d [ 5.496949] SKU: port_connectivity=0x1 [ 5.496951] SKU: enable_pcbeep=0x0 [ 5.496952] SKU: check_sum=0x00000004 [ 5.496953] SKU: customization=0x00000082 [ 5.496954] SKU: external_amp=0x1 [ 5.496955] SKU: platform_type=0x1 [ 5.496956] SKU: swap=0x0 [ 5.496957] SKU: override=0x1 [ 5.497222] autoconfig: line_outs=2 (0x14/0x17/0x0/0x0/0x0) type:speaker [ 5.497224] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.497225] hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 5.497226] mono: mono_out=0x0 [ 5.497227] inputs: [ 5.497229] Internal Mic=0x19 [ 5.497230] Mic=0x18 [ 5.497232] realtek: No valid SSID, checking pincfg 0x4004820d for NID 0x1d [ 5.497233] realtek: Enabling init ASM_ID=0x820d CODEC_ID=10ec0269 [ 5.507654] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 5.507779] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 5.508212] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 5.521388] FS-Cache: Loaded [ 5.538675] RPC: Registered named UNIX socket transport module. [ 5.538678] RPC: Registered udp transport module. [ 5.538680] RPC: Registered tcp transport module. [ 5.538682] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 5.549889] FS-Cache: Netfs 'nfs' registered for caching [ 5.566583] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 5.591424] init: failsafe main process (820) killed by TERM signal [ 5.692175] init: idmapd main process (868) terminated with status 1 [ 5.692188] init: idmapd main process ended, respawning [ 5.702536] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.702540] Bluetooth: BNEP filters: protocol multicast [ 5.702550] Bluetooth: BNEP socket layer initialized [ 5.708524] Bluetooth: RFCOMM TTY layer initialized [ 5.708538] Bluetooth: RFCOMM socket layer initialized [ 5.708546] Bluetooth: RFCOMM ver 1.11 [ 5.726022] type=1400 audit(1423305522.179:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=924 comm="apparmor_parser" [ 5.726032] type=1400 audit(1423305522.179:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=924 comm="apparmor_parser" [ 5.726611] type=1400 audit(1423305522.179:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=924 comm="apparmor_parser" [ 5.764244] usb 2-1.3: USB disconnect, device number 4 [ 5.820576] init: cups main process (926) killed by HUP signal [ 5.820592] init: cups main process ended, respawning [ 5.827208] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 6.093326] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 6.093374] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement) [ 6.094575] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 6.094832] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 6.222036] r8169 0000:03:00.0 eth1: link down [ 6.222062] r8169 0000:03:00.0 eth1: link down [ 6.222114] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 6.222629] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 6.732999] ATOM BIOS: Samsung_Petronas_DE_SeymourXT_PX [ 6.733043] [drm] GPU not posted. posting now... [ 6.736402] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 6.736404] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [ 6.736406] [drm] Detected VRAM RAM=1024M, BAR=256M [ 6.736407] [drm] RAM width 64bits DDR [ 6.736521] [TTM] Zone kernel: Available graphics memory: 3011654 kiB [ 6.736524] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 6.736525] [TTM] Initializing pool allocator [ 6.736529] [TTM] Initializing DMA pool allocator [ 6.736549] [drm] radeon: 1024M of VRAM memory ready [ 6.736550] [drm] radeon: 1024M of GTT memory ready. [ 6.736561] [drm] Loading CAICOS Microcode [ 6.817194] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 6.818245] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 6.822989] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000). [ 6.823105] radeon 0000:01:00.0: WB enabled [ 6.823108] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88008e156c00 [ 6.823110] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88008e156c0c [ 6.824568] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900163b2118 [ 6.824571] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.824572] [drm] Driver supports precise vblank timestamp query. [ 6.824574] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 6.824594] radeon 0000:01:00.0: irq 51 for MSI/MSI-X [ 6.824606] radeon 0000:01:00.0: radeon: using MSI. [ 6.824643] [drm] radeon: irq initialized. [ 6.841233] [drm] ring test on 0 succeeded in 3 usecs [ 6.841246] [drm] ring test on 3 succeeded in 6 usecs [ 6.888995] wlan1: authenticate with 6c:b0:ce:2b:e8:fd [ 6.890843] wlan1: send auth to 6c:b0:ce:2b:e8:fd (try 1/3) [ 6.917070] wlan1: authenticated [ 6.920090] wlan1: associate with 6c:b0:ce:2b:e8:fd (try 1/3) [ 6.948655] wlan1: RX AssocResp from 6c:b0:ce:2b:e8:fd (capab=0x431 status=0 aid=3) [ 6.949336] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated [ 6.949385] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 6.949437] wlan1: associated [ 6.949460] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 6.949511] cfg80211: Calling CRDA for country: DE [ 6.952170] cfg80211: Regulatory domain changed to country: DE [ 6.952174] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6.952177] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 6.952178] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 6.952180] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 6.952182] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) [ 6.952183] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 7.027304] [drm] ring test on 5 succeeded in 2 usecs [ 7.027313] [drm] UVD initialized successfully. [ 7.027627] [drm] Enabling audio 0 support [ 7.027696] [drm] ib test on ring 0 succeeded in 0 usecs [ 7.027760] [drm] ib test on ring 3 succeeded in 0 usecs [ 7.179214] [drm] ib test on ring 5 succeeded [ 7.179475] [drm] Radeon Display Connectors [ 7.184644] [drm] Internal thermal controller with fan control [ 7.192328] [drm] radeon: dpm initialized [ 7.193551] radeon 0000:01:00.0: No connectors reported connected with modes [ 7.193554] [drm] Cannot find any crtc or sizes - going 1024x768 [ 7.195846] [drm] fb mappable at 0xA0474000 [ 7.195848] [drm] vram apper at 0xA0000000 [ 7.195849] [drm] size 3145728 [ 7.195850] [drm] fb depth is 24 [ 7.195851] [drm] pitch is 4096 [ 7.195906] radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device [ 7.195919] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 1 [ 7.249248] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement) [ 7.790710] r8169 0000:03:00.0 eth1: link up [ 7.790719] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 7.864154] type=1400 audit(1423305524.315:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1108 comm="apparmor_parser" [ 7.864165] type=1400 audit(1423305524.315:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1108 comm="apparmor_parser" [ 7.864172] type=1400 audit(1423305524.315:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1108 comm="apparmor_parser" [ 7.864762] type=1400 audit(1423305524.315:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1105 comm="apparmor_parser" [ 7.864769] type=1400 audit(1423305524.315:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=1105 comm="apparmor_parser" [ 7.864777] type=1400 audit(1423305524.315:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1108 comm="apparmor_parser" [ 7.864783] type=1400 audit(1423305524.315:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1108 comm="apparmor_parser"