[   19.229614] wlan1: authenticate with 1c:7e:e5:46:5b:9d (try 1)
[   19.231380] wlan1: authenticated
[   19.231762] wlan1: associate with 1c:7e:e5:46:5b:9d (try 1)
[   19.235919] wlan1: RX AssocResp from 1c:7e:e5:46:5b:9d (capab=0x431 status=0 aid=3)
[   19.235923] wlan1: associated
[   19.242645] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   30.170396] wlan1: no IPv6 routers present
[  175.482108] usb 2-1.1: new high-speed USB device number 4 using ehci_hcd
[  175.591995] iwlwifi 0000:02:00.0: Tx aggregation enabled on ra = 1c:7e:e5:46:5b:9d tid = 0
[  175.609990] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x330C
[  175.610044] usbcore: registered new interface driver usblp
[  176.853656] usblp0: removed
[  176.855925] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x330C
[  472.721260] usblp0: removed
[  486.004264] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x330C
[  790.622584] usblp0: removed
[  799.970597] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x330C
[  882.532367] iwlwifi 0000:02:00.0: Tx aggregation enabled on ra = 1c:7e:e5:46:5b:9d tid = 6
[ 1179.236472] usblp0: removed
[ 1188.191116] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x330C
[ 1188.347143] usblp0: removed
[ 1197.255944] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x330C
[ 1197.408889] usblp0: removed
[ 1206.381318] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x330C
[ 1206.545447] usblp0: removed
[ 1215.485503] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x330C
[ 1215.648384] usblp0: removed
[ 1224.566394] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x330C
[ 1224.723240] usblp0: removed
[ 1233.608474] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x330C
[ 1297.926067] usblp0: removed
[ 1306.842783] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x330C
[ 1306.996956] usblp0: removed
[ 1315.896161] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x330C
[ 1698.599938] usblp0: removed
[ 1708.275830] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x330C
[ 1758.423918] usblp0: removed
[ 1768.127463] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x330C
[ 2349.537358] usblp0: removed
[ 2359.117858] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x330C
[ 2384.699649] usblp0: removed
[ 2394.050114] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x330C
[ 2396.046452] usblp0: removed
[ 2405.394398] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x330C
[ 2407.449272] usblp0: removed
[ 2416.805004] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x330C
[ 2728.509259] usb 2-1.1: USB disconnect, device number 4
[ 2728.509540] usblp0: removed
[ 2782.562925] usb 2-1.1: new high-speed USB device number 5 using ehci_hcd
[ 2782.661982] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04E8 pid 0x330C
[ 2783.834929] usblp0: removed
[ 2783.838736] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04E8 pid 0x330C
[ 3065.367278] usblp0: removed
[ 3065.371649] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04E8 pid 0x330C
[ 3107.385933] usb 2-1.1: USB disconnect, device number 5
[ 3107.386185] usblp0: removed
[ 3112.261770] usb 2-1.1: new high-speed USB device number 6 using ehci_hcd
[ 3112.362312] usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x04E8 pid 0x330C
[ 3113.531394] usblp0: removed
[ 3113.536815] usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x04E8 pid 0x330C
[ 3222.263302] usb 2-1.1: USB disconnect, device number 6
[ 3222.263485] usblp0: removed
[ 3228.344454] usb 2-1.1: new high-speed USB device number 7 using ehci_hcd
[ 3228.443647] usblp0: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x04E8 pid 0x330C
[ 3229.615565] usblp0: removed
[ 3229.619946] usblp0: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x04E8 pid 0x330C
[ 3371.897194] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 3371.898228] SGI XFS Quota Management subsystem
[ 3371.901257] JFS: nTxBlock = 8192, nTxLock = 65536
[ 3371.912058] NTFS driver 2.1.30 [Flags: R/O MODULE].
[ 3371.922247] QNX4 filesystem 0.2.3 registered.
[ 3371.931992] Btrfs loaded
[ 3618.730016] usblp0: removed
[ 3618.734054] usblp0: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x04E8 pid 0x330C
[ 3731.391586] usblp0: removed
[ 3740.380694] usblp0: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x04E8 pid 0x330C