[    3.774113] microsoft 0003:045E:00DB.0001: input,hidraw2: USB HID v1.11 Keyboard [Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000] on usb-0000:00:1d.0-1.1/input0
[    3.785213] input: Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input7
[    3.785341] microsoft 0003:045E:00DB.0002: input,hidraw3: USB HID v1.11 Device [Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000] on usb-0000:00:1d.0-1.1/input1
[  259.935162] /dev/vmmon[1178]: Module vmmon: registered with major=10 minor=165
[  259.935204] /dev/vmmon[1178]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
[  259.935212] /dev/vmmon[1178]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
[  259.935215] /dev/vmmon[1178]: Module vmmon: initialized
[  259.948345] [1186]: VMCI: shared components initialized.
[  259.948388] [1186]: VMCI: host components initialized.
[  259.948465] [1186]: VMCI: Module registered (name=vmci,major=10,minor=57).
[  259.948468] [1186]: VMCI: Using host personality
[  259.948470] [1186]: VMCI: Module (name=vmci) is initialized
[  261.045126] /dev/vmnet: open called by PID 1286 (vmnet-netifup)
[  261.045132] /dev/vmnet: hub 1 does not exist, allocating memory.
[  261.045147] /dev/vmnet: port on hub 1 successfully opened
[  261.359173] /dev/vmnet: open called by PID 1291 (vmnet-dhcpd)
[  261.359184] /dev/vmnet: port on hub 1 successfully opened
[  261.401679] /dev/vmnet: open called by PID 1296 (vmnet-natd)
[  261.401684] /dev/vmnet: hub 8 does not exist, allocating memory.
[  261.401699] /dev/vmnet: port on hub 8 successfully opened
[  261.453056] /dev/vmnet: open called by PID 1298 (vmnet-netifup)
[  261.453067] /dev/vmnet: port on hub 8 successfully opened
[  261.594503] /dev/vmnet: open called by PID 1303 (vmnet-dhcpd)
[  261.594513] /dev/vmnet: port on hub 8 successfully opened
[  262.224522] tg3 0000:09:00.0: eth0: Link is up at 1000 Mbps, full duplex
[  262.224525] tg3 0000:09:00.0: eth0: Flow control is on for TX and on for RX
[  262.856308] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  262.858474] /dev/vmnet: open called by PID 1265 (vmnet-bridge)
[  262.858488] /dev/vmnet: hub 0 does not exist, allocating memory.
[  262.858519] /dev/vmnet: port on hub 0 successfully opened
[  262.858545] bridge-eth0: up
[  262.858550] bridge-eth0: attached
[  263.056420] userif-2: sent link down event.
[  263.056423] userif-2: sent link up event.
[  264.634415] userif-2: sent link down event.
[  264.634418] userif-2: sent link up event.
[  265.670055] init: plymouth-stop pre-start process (1955) terminated with status 1
[  271.258712] vmnet1: no IPv6 routers present
[  271.570661] vmnet8: no IPv6 routers present
[  273.289857] eth0: no IPv6 routers present
[ 1377.203861] userif-2: sent link down event.
[ 1377.203866] userif-2: sent link up event.
[ 1378.497512] userif-2: sent link down event.
[ 1378.497517] userif-2: sent link up event.
[ 1387.203226] eth0: no IPv6 routers present
[ 1387.506963] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445406807688724923 new 18445406807687524621 attempts 1
[ 2645.203535] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 2645.296314] ISO 9660 Extensions: RRIP_1991A
[ 2656.317680] tg3 0000:09:00.0: eth0: Link is down
[ 2656.320544] bridge-eth0: disabling the bridge
[ 2656.354898] bridge-eth0: down
[ 2656.354906] bridge-eth0: detached
[ 2656.520691] userif-2: sent link down event.
[ 2656.520696] userif-2: sent link up event.
[ 2660.173883] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2660.374240] userif-2: sent link down event.
[ 2660.374245] userif-2: sent link up event.
[ 2704.398546] usb 2-1.1: USB disconnect, device number 3
[ 2988.203968] kbd_keycode: 33 callbacks suppressed
[ 2988.203973] keyboard: can't emulate rawmode for keycode 240
[ 2988.203984] keyboard: can't emulate rawmode for keycode 240
[ 2988.204030] iwlwifi 0000:0c:00.0: RF_KILL bit toggled to enable radio.
[ 2988.618661] usb 1-1.6: new full-speed USB device number 5 using ehci_hcd
[ 2988.713738] hub 1-1.6:1.0: USB hub found
[ 2988.713961] hub 1-1.6:1.0: 3 ports detected
[ 2988.986549] usb 1-1.6.1: new full-speed USB device number 6 using ehci_hcd
[ 2989.083578] input: HID 413c:8161 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.0/input/input17
[ 2989.083838] generic-usb 0003:413C:8161.0005: input,hidraw2: USB HID v1.11 Keyboard [HID 413c:8161] on usb-0000:00:1a.0-1.6.1/input0
[ 2989.154617] usb 1-1.6.2: new full-speed USB device number 7 using ehci_hcd
[ 2989.253545] input: HID 413c:8162 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.2/1-1.6.2:1.0/input/input18
[ 2989.254090] generic-usb 0003:413C:8162.0006: input,hidraw3: USB HID v1.11 Mouse [HID 413c:8162] on usb-0000:00:1a.0-1.6.2/input0
[ 2989.770225] usb 1-1.6.3: new full-speed USB device number 8 using ehci_hcd
[ 2989.794278] iwlwifi 0000:0c:00.0: L1 Enabled; Disabling L0S
[ 2989.797475] iwlwifi 0000:0c:00.0: Radio type=0x0-0x2-0x0
[ 2989.892174] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 2989.892482] usbcore: registered new interface driver btusb
[ 2989.974424] iwlwifi 0000:0c:00.0: L1 Enabled; Disabling L0S
[ 2989.977473] iwlwifi 0000:0c:00.0: Radio type=0x0-0x2-0x0
[ 2990.027252] /dev/vmnet: open called by PID 1265 (vmnet-bridge)
[ 2990.027267] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 2990.027313] /dev/vmnet: port on hub 0 successfully opened
[ 2990.027330] bridge-wlan0: device is wireless, enabling SMAC
[ 2990.027336] bridge-wlan0: up
[ 2990.029549] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2990.029568] bridge-wlan0: attached
[ 2990.032188] bridge-wlan0: disabling the bridge
[ 2990.121783] bridge-wlan0: down
[ 2990.121795] bridge-wlan0: detached
[ 2990.227293] userif-2: sent link down event.
[ 2990.227299] userif-2: sent link up event.
[ 3020.305501] wlan0: authenticate with 00:22:3f:51:c8:65 (try 1)
[ 3020.308134] wlan0: authenticated
[ 3020.315595] wlan0: associate with 00:22:3f:51:c8:65 (try 1)
[ 3020.318805] wlan0: RX AssocResp from 00:22:3f:51:c8:65 (capab=0x431 status=0 aid=1)
[ 3020.318810] wlan0: associated
[ 3020.338702] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 3020.338912] cfg80211: Calling CRDA for country: US
[ 3020.344141] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 3020.344150] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 3020.344155] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 3020.344166] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 3020.344170] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 3020.344175] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 3020.344178] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 3020.344183] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 3020.344187] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 3020.344191] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 3020.344195] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 3020.344200] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 3020.344203] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 3020.344208] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 3020.344211] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 3020.344216] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 3020.344220] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 3020.344224] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 3020.344228] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 3020.344232] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 3020.344236] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 3020.344241] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 3020.344244] cfg80211: Disabling freq 2467 MHz
[ 3020.344247] cfg80211: Disabling freq 2472 MHz
[ 3020.344250] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[ 3020.344255] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 3020.344258] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[ 3020.344263] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 3020.344266] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[ 3020.344271] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 3020.344275] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[ 3020.344279] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 3020.344283] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:
[ 3020.344288] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3020.344291] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:
[ 3020.344296] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3020.344299] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:
[ 3020.344304] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3020.344308] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:
[ 3020.344312] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3020.344316] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule:
[ 3020.344321] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3020.344324] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule:
[ 3020.344329] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3020.344332] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule:
[ 3020.344337] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3020.344341] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule:
[ 3020.344345] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3020.344349] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule:
[ 3020.344354] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3020.344357] cfg80211: Disabling freq 5600 MHz
[ 3020.344359] cfg80211: Disabling freq 5620 MHz
[ 3020.344362] cfg80211: Disabling freq 5640 MHz
[ 3020.344365] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule:
[ 3020.344370] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3020.344373] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule:
[ 3020.344378] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3020.344382] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule:
[ 3020.344386] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3020.344390] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[ 3020.344394] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 3020.344398] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[ 3020.344403] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 3020.344406] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[ 3020.344411] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 3020.344415] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[ 3020.344419] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 3020.344423] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[ 3020.344428] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 3020.344435] cfg80211: Regulatory domain changed to country: US
[ 3020.344438] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3020.344442] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 3020.344446] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 3020.344451] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3020.344455] cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3020.344459] cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3020.344463] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 3020.353518] /dev/vmnet: open called by PID 1265 (vmnet-bridge)
[ 3020.353538] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 3020.353571] /dev/vmnet: port on hub 0 successfully opened
[ 3020.353585] bridge-wlan0: device is wireless, enabling SMAC
[ 3020.353590] bridge-wlan0: up
[ 3020.353594] bridge-wlan0: attached
[ 3020.553610] userif-2: sent link down event.
[ 3020.553615] userif-2: sent link up event.
[ 3022.645785] userif-2: sent link down event.
[ 3022.645791] userif-2: sent link up event.
[ 3023.732850] userif-2: sent link down event.
[ 3023.732855] userif-2: sent link up event.
[ 3030.764591] wlan0: no IPv6 routers present
[ 6828.158687] /dev/vmmon[6857]: PTSC: initialized at 1728999000 Hz using TSC, TSCs are synchronized.
[ 6828.376360] /dev/vmmon[6857]: Monitor IPI vector: 0
[ 6834.309143] /dev/vmnet: open called by PID 6864 (vmx-vcpu-0)
[ 6834.309163] /dev/vmnet: port on hub 0 successfully opened
[ 6959.796948] tg3 0000:09:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 6959.796954] tg3 0000:09:00.0: eth0: Flow control is on for TX and on for RX
[ 6959.799453] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6959.999662] userif-2: sent link down event.
[ 6959.999667] userif-2: sent link up event.
[ 6961.137907] bridge-wlan0: disabling the bridge
[ 6961.153251] bridge-wlan0: down
[ 6961.153261] bridge-wlan0: detached
[ 6961.153313] /dev/vmnet: open called by PID 1265 (vmnet-bridge)
[ 6961.153325] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 6961.153367] /dev/vmnet: port on hub 0 successfully opened
[ 6961.153386] bridge-eth0: up
[ 6961.153393] bridge-eth0: attached
[ 6961.338085] userif-2: sent link down event.
[ 6961.338090] userif-2: sent link up event.
[ 6969.901647] eth0: no IPv6 routers present
[ 6975.988609] bridge-eth0: disabling the bridge
[ 6976.027056] bridge-eth0: down
[ 6976.027064] bridge-eth0: detached
[ 6976.027116] /dev/vmnet: open called by PID 1265 (vmnet-bridge)
[ 6976.027129] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 6976.027161] /dev/vmnet: port on hub 0 successfully opened
[ 6976.027173] bridge-wlan0: device is wireless, enabling SMAC
[ 6976.027178] bridge-wlan0: up
[ 6976.027183] bridge-wlan0: attached
[ 6976.188707] userif-2: sent link down event.
[ 6976.188712] userif-2: sent link up event.
[ 6977.371695] bridge-wlan0: disabling the bridge
[ 6977.402428] bridge-wlan0: down
[ 6977.402437] bridge-wlan0: detached
[ 6977.402491] /dev/vmnet: open called by PID 1265 (vmnet-bridge)
[ 6977.402503] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 6977.402535] /dev/vmnet: port on hub 0 successfully opened
[ 6977.402548] bridge-eth0: up
[ 6977.402554] bridge-eth0: attached
[ 6977.571957] userif-2: sent link down event.
[ 6977.571962] userif-2: sent link up event.
[ 6986.174169] eth0: no IPv6 routers present
[ 6994.222941] /dev/vmmon[8807]: PTSC: initialized at 1728999000 Hz using TSC, TSCs are synchronized.
[ 7000.225330] /dev/vmnet: open called by PID 8814 (vmx-vcpu-0)
[ 7000.225342] device eth0 entered promiscuous mode
[ 7000.225359] bridge-eth0: enabled promiscuous mode
[ 7000.225360] /dev/vmnet: port on hub 0 successfully opened
[ 7039.937755] wlan0: deauthenticating from 00:22:3f:51:c8:65 by local choice (reason=3)
[ 7040.084540] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 7040.084548] cfg80211: Restoring regulatory settings
[ 7040.084555] cfg80211: Calling CRDA to update world regulatory domain
[ 7040.093912] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 7040.093920] cfg80211: World regulatory domain updated:
[ 7040.093924] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7040.093932] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7040.093938] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7040.093944] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7040.093950] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7040.093957] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7040.287118] userif-2: sent link down event.
[ 7040.287126] userif-2: sent link up event.
[ 7289.936224] device eth0 left promiscuous mode
[ 7289.936248] bridge-eth0: disabled promiscuous mode
[ 7302.461547] tg3 0000:09:00.0: eth0: Link is down
[ 7302.464388] bridge-eth0: disabling the bridge
[ 7302.530483] bridge-eth0: down
[ 7302.530490] bridge-eth0: detached
[ 7302.664666] userif-2: sent link down event.
[ 7302.664671] userif-2: sent link up event.
[ 7307.034681] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7307.235409] userif-2: sent link down event.
[ 7307.235414] userif-2: sent link up event.
[ 7352.207683] wlan0: authenticate with 00:22:3f:51:c8:65 (try 1)
[ 7352.210128] wlan0: authenticated
[ 7352.212691] wlan0: associate with 00:22:3f:51:c8:65 (try 1)
[ 7352.216218] wlan0: RX ReassocResp from 00:22:3f:51:c8:65 (capab=0x431 status=0 aid=1)
[ 7352.216223] wlan0: associated
[ 7352.238569] cfg80211: Calling CRDA for country: US
[ 7352.243972] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 7352.243979] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 7352.243983] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 7352.243988] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 7352.243992] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 7352.243997] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 7352.244000] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 7352.244005] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 7352.244008] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 7352.244013] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 7352.244017] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 7352.244021] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 7352.244025] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 7352.244029] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 7352.244033] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 7352.244038] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 7352.244041] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 7352.244046] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 7352.244049] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 7352.244054] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 7352.244058] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 7352.244062] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 7352.244066] cfg80211: Disabling freq 2467 MHz
[ 7352.244068] cfg80211: Disabling freq 2472 MHz
[ 7352.244071] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[ 7352.244076] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 7352.244080] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[ 7352.244084] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 7352.244088] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[ 7352.244093] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 7352.244096] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[ 7352.244101] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 7352.244104] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:
[ 7352.244109] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7352.244113] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:
[ 7352.244117] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7352.244121] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:
[ 7352.244125] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7352.244129] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:
[ 7352.244134] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7352.244137] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule:
[ 7352.244142] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7352.244146] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule:
[ 7352.244150] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7352.244154] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule:
[ 7352.244158] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7352.244162] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule:
[ 7352.244167] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7352.244170] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule:
[ 7352.244175] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7352.244178] cfg80211: Disabling freq 5600 MHz
[ 7352.244181] cfg80211: Disabling freq 5620 MHz
[ 7352.244183] cfg80211: Disabling freq 5640 MHz
[ 7352.244186] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule:
[ 7352.244191] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7352.244195] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule:
[ 7352.244199] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7352.244203] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule:
[ 7352.244208] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7352.244211] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[ 7352.244216] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 7352.244219] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[ 7352.244224] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 7352.244228] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[ 7352.244232] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 7352.244236] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[ 7352.244241] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 7352.244244] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[ 7352.244249] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 7352.244256] cfg80211: Regulatory domain changed to country: US
[ 7352.244259] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7352.244263] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 7352.244267] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 7352.244272] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7352.244276] cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7352.244280] cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7352.244284] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 7352.315165] /dev/vmnet: open called by PID 1265 (vmnet-bridge)
[ 7352.315180] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 7352.315213] /dev/vmnet: port on hub 0 successfully opened
[ 7352.315224] bridge-wlan0: device is wireless, enabling SMAC
[ 7352.315227] bridge-wlan0: up
[ 7352.315230] bridge-wlan0: attached
[ 7352.515123] userif-2: sent link down event.
[ 7352.515128] userif-2: sent link up event.
[ 7353.671721] userif-2: sent link down event.
[ 7353.671726] userif-2: sent link up event.
[ 7363.197106] wlan0: no IPv6 routers present
[13059.896115] ISO 9660 Extensions: Microsoft Joliet Level 3
[13060.021220] ISO 9660 Extensions: RRIP_1991A
[13917.739526] hrtimer: interrupt took 144045 ns
[22604.811314] usb 2-1.2: new full-speed USB device number 5 using ehci_hcd
[22604.933209] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[22604.933233] usbcore: registered new interface driver usblp
[22605.854841] usblp0: removed
[22605.856724] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[22605.994812] usblp0: removed
[22605.996668] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[22610.906644] usblp0: removed
[22610.908841] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[22615.956243] usblp0: removed
[22615.958492] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[22621.006224] usblp0: removed
[22621.008114] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[22626.055734] usblp0: removed
[22626.057403] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[22631.105806] usblp0: removed
[22631.107505] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[22636.155927] usblp0: removed
[22636.157701] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[22653.828345] usblp0: removed
[22653.830423] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[22658.878156] usblp0: removed
[22658.879882] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[22663.928104] usblp0: removed
[22663.929991] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[22668.977861] usblp0: removed
[22668.979762] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[22674.027297] usblp0: removed
[22674.029107] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[22679.077737] usblp0: removed
[22679.079640] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[22684.127386] usblp0: removed
[22684.129686] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[22697.909026] usblp0: removed
[22697.910866] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[22730.871392] usblp0: removed
[22730.873185] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[22799.643104] usblp0: removed
[22807.789997] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[22807.850930] usblp0: removed
[22815.945346] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[22816.003742] usblp0: removed
[22824.107322] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[22824.168242] usblp0: removed
[22832.263795] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[22832.320353] usblp0: removed
[22840.398690] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[23216.646411] usblp0: removed
[23224.794986] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[23224.854928] usblp0: removed
[23232.990404] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[23292.957805] usblp0: removed
[23301.093604] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[23301.154548] usblp0: removed
[23309.218282] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[23309.278811] usblp0: removed
[23317.416024] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[23472.030336] usblp0: removed
[23472.032283] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[23477.080542] usblp0: removed
[23477.082583] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[23482.130111] usblp0: removed
[23482.132033] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[23487.179762] usblp0: removed
[23487.181502] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[23492.229743] usblp0: removed
[23492.231783] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[23497.279825] usblp0: removed
[23497.281667] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[23527.642764] usblp0: removed
[23527.644345] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[23594.066278] usblp0: removed
[23594.068039] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[23599.116600] usblp0: removed
[23599.118597] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[23604.166804] usblp0: removed
[23604.168580] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[23609.216441] usblp0: removed
[23609.218474] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[23614.266259] usblp0: removed
[23614.268151] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[23644.825094] usblp0: removed
[23644.826670] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[23746.293989] usblp0: removed
[23746.298170] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[23819.811726] usblp0: removed
[23828.942735] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[23884.831783] usblp0: removed
[23892.991495] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[23893.056661] usblp0: removed
[23901.203980] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[24111.428233] usblp0: removed
[24119.547610] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[24119.608287] usblp0: removed
[24127.736471] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[24127.792747] usblp0: removed
[24135.869006] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[24135.929969] usblp0: removed
[24144.021382] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[24191.549937] usblp0: removed
[24199.553799] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[24199.614912] usblp0: removed
[24207.614955] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[24207.671543] usblp0: removed
[24215.675061] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[24452.219994] usblp0: removed
[24460.315553] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[24460.376919] usblp0: removed
[24468.465057] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[24504.290070] usblp0: removed
[24512.411308] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[24870.470828] usblp0: removed
[24878.574938] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[24944.679965] usblp0: removed
[24952.771434] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[24987.909842] usblp0: removed
[24996.021215] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[24996.078222] usblp0: removed
[25004.185916] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[25411.670952] usblp0: removed
[25411.672994] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[25464.991868] usblp0: removed
[25473.131745] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[26346.894981] usblp0: removed
[26355.018760] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[26608.464546] usblp0: removed
[26616.596535] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[26634.181906] usblp0: removed
[26642.249673] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[26642.306731] usblp0: removed
[26650.402221] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[26681.234163] usblp0: removed
[26689.305747] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[26780.241910] udevd[21052]: starting version 175
[26823.885773] usblp0: removed
[26831.985346] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[26832.042390] usblp0: removed
[26840.155468] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[27153.200301] udevd[21356]: starting version 175
[27175.741035] usblp0: removed
[27183.886655] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[27183.941584] usblp0: removed
[27192.061370] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[27438.662156] usblp0: removed
[27446.793591] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[27784.871442] udevd[22093]: starting version 175
[27820.624790] type=1400 audit(1337293594.465:32): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=22145 comm="apparmor_parser"
[27820.625644] type=1400 audit(1337293594.465:33): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=22145 comm="apparmor_parser"
[28286.555477] type=1400 audit(1337294060.593:34): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=22778 comm="apparmor_parser"
[28286.556340] type=1400 audit(1337294060.593:35): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=22778 comm="apparmor_parser"
[28294.508362] usblp0: removed
[28302.599998] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[28363.887052] usblp0: removed
[28371.982585] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027
[28585.247147] type=1400 audit(1337294359.409:36): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=23294 comm="apparmor_parser"
[28585.248272] type=1400 audit(1337294359.413:37): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=23294 comm="apparmor_parser"
[28596.912474] usblp0: removed
[28605.048025] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0027