[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-46-generic (buildd@orlo) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #79-Ubuntu SMP Tue Mar 10 20:06:50 UTC 2015 (Ubuntu 3.13.0-46.79-generic 3.13.11-ckt15) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-46-generic root=UUID=5a8c5a63-547f-43e0-983c-3bb23273f14f ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000097fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000098000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000befc1d9f] usable [ 0.000000] BIOS-e820: [mem 0x00000000befc1da0-0x00000000befc1dff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000befc1e00-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed45000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: Hewlett-Packard HP xw4600 Workstation/0AA0h, BIOS 786F3 v01.04 11/08/2007 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E3FFF write-protect [ 0.000000] E4000-EFFFF write-back [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 2 base 200000000 mask FC0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 8GB, type WB [ 0.000000] reg 1, base: 3GB, range: 1GB, type UC [ 0.000000] reg 2, base: 8GB, range: 1GB, type WB [ 0.000000] total RAM covered: 8192M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 4 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 4GB, range: 4GB, type WB [ 0.000000] reg 3, base: 8GB, range: 1GB, type WB [ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbefc1 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f9bf0-0x000f9bff] mapped at [ffff8800000f9bf0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000092000] 92000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE [ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE [ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x23fe00000-0x23fffffff] [ 0.000000] [mem 0x23fe00000-0x23fffffff] page 2M [ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x23c000000-0x23fdfffff] [ 0.000000] [mem 0x23c000000-0x23fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff] [ 0.000000] [mem 0x200000000-0x23bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbefc0fff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xbedfffff] page 2M [ 0.000000] [mem 0xbee00000-0xbefc0fff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M [ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE [ 0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x35b4e000-0x36d9efff] [ 0.000000] ACPI: RSDP 00000000000e6410 000024 (v02 COMPAQ) [ 0.000000] ACPI: XSDT 00000000befc1ee8 000064 (v01 HPQOEM SLIC-WKS 20071108 00000000) [ 0.000000] ACPI: FACP 00000000befc2088 0000F4 (v03 COMPAQ BEFC2647 00000000) [ 0.000000] ACPI BIOS Error (bug): 32/64X address mismatch in FADT/Gpe0Block: 0x0000F820/0x000000000001F028, using 32 (20131115/tbfadt-462) [ 0.000000] ACPI: DSDT 00000000befc2647 0098EC (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E) [ 0.000000] ACPI: FACS 00000000befc1e00 000040 [ 0.000000] ACPI: APIC 00000000befc217c 000084 (v01 COMPAQ BEARLX38 00000001 00000000) [ 0.000000] ACPI: ASF! 00000000befc2200 000063 (v32 COMPAQ BEARLX38 00000001 00000000) [ 0.000000] ACPI: MCFG 00000000befc2263 00003C (v01 COMPAQ BEARLX38 00000001 00000000) [ 0.000000] ACPI: TCPA 00000000befc229f 000032 (v01 COMPAQ BEARLX38 00000001 00000000) [ 0.000000] ACPI: SLIC 00000000befc22d1 000176 (v01 HPQOEM SLIC-WKS 00000001 00000000) [ 0.000000] ACPI: HPET 00000000befc2447 000038 (v01 COMPAQ BEARLX38 00000001 00000000) [ 0.000000] ACPI: DMAR 00000000befc247f 000158 (v01 COMPAQ BEARLX38 00000001 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23fffffff] [ 0.000000] NODE_DATA [mem 0x23fff6000-0x23fffafff] [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237600000-ffff88023f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x23fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00097fff] [ 0.000000] node 0: [mem 0x00100000-0xbefc0fff] [ 0.000000] node 0: [mem 0x100000000-0x23fffffff] [ 0.000000] On node 0 totalpages: 2092888 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3991 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12160 pages used for memmap [ 0.000000] DMA32 zone: 778177 pages, LIFO batch:31 [ 0.000000] Normal zone: 20480 pages used for memmap [ 0.000000] Normal zone: 1310720 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0xf808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x00098000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e8000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbefc1000-0xbefc1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbefc1000-0xbefc1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbefc2000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xf3ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfed3ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xf3ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023fc00000 s82368 r8192 d24128 u524288 [ 0.000000] pcpu-alloc: s82368 r8192 d24128 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2060163 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-46-generic root=UUID=5a8c5a63-547f-43e0-983c-3bb23273f14f ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /build/buildd/linux-3.13.0/drivers/iommu/dmar.c:488 warn_invalid_dmar+0x7e/0x90() [ 0.000000] Your BIOS is broken; DMAR reported at address fed90000 returns all ones! [ 0.000000] BIOS vendor: Hewlett-Packard; Ver: 786F3 v01.04; Product Version: [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.13.0-46-generic #79-Ubuntu [ 0.000000] Hardware name: Hewlett-Packard HP xw4600 Workstation/0AA0h, BIOS 786F3 v01.04 11/08/2007 [ 0.000000] 000000000000000b ffffffff81c01de8 ffffffff817212c6 ffffffff81c01e30 [ 0.000000] ffffffff81c01e20 ffffffff810677dd ffffffff81fe0010 ffffffff81fe0054 [ 0.000000] 00000000fed90000 0000000000000000 ffffffff81c01fb0 ffffffff81c01e80 [ 0.000000] Call Trace: [ 0.000000] [] dump_stack+0x45/0x56 [ 0.000000] [] warn_slowpath_common+0x7d/0xa0 [ 0.000000] [] warn_slowpath_fmt_taint+0x44/0x50 [ 0.000000] [] ? __early_set_fixmap+0xa0/0xa5 [ 0.000000] [] warn_invalid_dmar+0x7e/0x90 [ 0.000000] [] check_zero_address+0xd6/0xf4 [ 0.000000] [] detect_intel_iommu+0x15/0xae [ 0.000000] [] pci_iommu_alloc+0x4a/0x6c [ 0.000000] [] mem_init+0x17/0x9c [ 0.000000] [] start_kernel+0x202/0x443 [ 0.000000] [] ? repair_env_string+0x5c/0x5c [ 0.000000] [] ? early_idt_handlers+0x120/0x120 [ 0.000000] [] x86_64_start_reservations+0x2a/0x2c [ 0.000000] [] x86_64_start_kernel+0x143/0x152 [ 0.000000] ---[ end trace 18b585bbafa8c5bd ]--- [ 0.000000] Memory: 8138568K/8371552K available (7384K kernel code, 1145K rwdata, 3408K rodata, 1336K init, 1444K bss, 232984K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-3. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2399.839 MHz processor [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.67 BogoMIPS (lpj=9599356) [ 0.004007] pid_max: default: 32768 minimum: 301 [ 0.004044] Security Framework initialized [ 0.004068] AppArmor: AppArmor initialized [ 0.004069] Yama: becoming mindful. [ 0.004793] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.008912] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.010650] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.010664] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.011022] Initializing cgroup subsys memory [ 0.011032] Initializing cgroup subsys devices [ 0.011035] Initializing cgroup subsys freezer [ 0.011037] Initializing cgroup subsys blkio [ 0.011039] Initializing cgroup subsys perf_event [ 0.011042] Initializing cgroup subsys hugetlb [ 0.011068] CPU: Physical Processor ID: 0 [ 0.011069] CPU: Processor Core ID: 0 [ 0.011071] mce: CPU supports 6 MCE banks [ 0.011079] CPU0: Thermal monitoring enabled (TM2) [ 0.011087] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.011087] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32 [ 0.011087] tlb_flushall_shift: -1 [ 0.011188] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000) [ 0.012704] ACPI: Core revision 20131115 [ 0.014758] ACPI: All ACPI Tables successfully acquired [ 0.016014] ftrace: allocating 28563 entries in 112 pages [ 0.028097] dmar: Host address width 36 [ 0.028101] dmar: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.028115] dmar: IOMMU: failed to map dmar0 [ 0.028116] dmar: parse DMAR table failure. [ 0.032214] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.071905] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (fam: 06, model: 0f, stepping: 0b) [ 0.072000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.072000] perf_event_intel: PEBS disabled due to CPU errata [ 0.072000] ... version: 2 [ 0.072000] ... bit width: 40 [ 0.072000] ... generic registers: 2 [ 0.072000] ... value mask: 000000ffffffffff [ 0.072000] ... max period: 000000007fffffff [ 0.072000] ... fixed-purpose events: 3 [ 0.072000] ... event mask: 0000000700000003 [ 0.072000] x86: Booting SMP configuration: [ 0.083302] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.072000] .... node #0, CPUs: #1 #2 #3 [ 0.108021] x86: Booted up 1 node, 4 CPUs [ 0.108025] smpboot: Total of 4 processors activated (19198.71 BogoMIPS) [ 0.112182] devtmpfs: initialized [ 0.121825] EVM: security.selinux [ 0.121827] EVM: security.SMACK64 [ 0.121828] EVM: security.ima [ 0.121830] EVM: security.capability [ 0.121844] PM: Registering ACPI NVS region [mem 0xbefc1da0-0xbefc1dff] (96 bytes) [ 0.121844] pinctrl core: initialized pinctrl subsystem [ 0.121844] regulator-dummy: no parameters [ 0.121844] RTC time: 5:37:31, date: 03/17/15 [ 0.121844] NET: Registered protocol family 16 [ 0.121844] cpuidle: using governor ladder [ 0.121844] cpuidle: using governor menu [ 0.121844] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.121844] ACPI: bus type PCI registered [ 0.121844] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.121844] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000) [ 0.121844] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820 [ 0.127944] PCI: Using configuration type 1 for base access [ 0.129001] bio: create slab at 0 [ 0.129001] ACPI: Added _OSI(Module Device) [ 0.129001] ACPI: Added _OSI(Processor Device) [ 0.129001] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.129001] ACPI: Added _OSI(Processor Aggregator Device) [ 0.144071] ACPI: SSDT 00000000befcd361 0003AC (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E) [ 0.144334] ACPI: Dynamic OEM Table Load: [ 0.144337] ACPI: SSDT (null) 0003AC (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E) [ 0.152347] ACPI: Interpreter enabled [ 0.152353] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.152358] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.152371] ACPI: (supports S0 S3 S4 S5) [ 0.152372] ACPI: Using IOAPIC for interrupt routing [ 0.152394] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.152479] ACPI: No dock devices found. [ 0.160172] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.160185] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.160190] ACPI BIOS Error (bug): \_SB_.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20131115/nsarguments-189) [ 0.160237] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20131115/dsfield-211) [ 0.160242] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8802340b5af0), AE_ALREADY_EXISTS (20131115/psparse-536) [ 0.160249] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error [ 0.160254] acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM [ 0.160470] acpi PNP0A08:00: host bridge window [mem 0xf8000000-0xfebfffff] (ignored) [ 0.160473] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.160475] acpi PNP0A08:00: host bridge window [io 0x1000-0x2fff] (ignored) [ 0.160478] acpi PNP0A08:00: host bridge window [io 0x3000-0x6fff] (ignored) [ 0.160480] acpi PNP0A08:00: host bridge window [io 0x7000-0xafff] (ignored) [ 0.160482] acpi PNP0A08:00: host bridge window [io 0xb000-0xffff] (ignored) [ 0.160484] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.160486] acpi PNP0A08:00: host bridge window [mem 0xc0000000-0xf3ffffff] (ignored) [ 0.160488] PCI: root bus 00: using default resources [ 0.160491] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.160640] PCI host bridge to bus 0000:00 [ 0.160643] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.160646] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.160648] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff] [ 0.160657] pci 0000:00:00.0: [8086:29e0] type 00 class 0x060000 [ 0.160750] pci 0000:00:01.0: [8086:29e1] type 01 class 0x060400 [ 0.160787] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.160830] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.160884] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.160924] pci 0000:00:1a.0: reg 0x20: [io 0x2100-0x211f] [ 0.161000] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.161033] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [ 0.161073] pci 0000:00:1a.1: reg 0x20: [io 0x2120-0x213f] [ 0.161146] pci 0000:00:1a.1: System wakeup disabled by ACPI [ 0.161179] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 [ 0.161219] pci 0000:00:1a.2: reg 0x20: [io 0x2140-0x215f] [ 0.161292] pci 0000:00:1a.2: System wakeup disabled by ACPI [ 0.161332] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.161353] pci 0000:00:1a.7: reg 0x10: [mem 0xe3104800-0xe3104bff] [ 0.161437] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.161483] pci 0000:00:1a.7: System wakeup disabled by ACPI [ 0.161520] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.161535] pci 0000:00:1b.0: reg 0x10: [mem 0xe3100000-0xe3103fff 64bit] [ 0.161598] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.161670] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 [ 0.161733] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.161781] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.161817] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400 [ 0.161891] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.161937] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.161975] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400 [ 0.162039] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.162088] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 0.162122] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.162161] pci 0000:00:1d.0: reg 0x20: [io 0x2160-0x217f] [ 0.162235] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.162266] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.162306] pci 0000:00:1d.1: reg 0x20: [io 0x2180-0x219f] [ 0.162379] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.162413] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.162453] pci 0000:00:1d.2: reg 0x20: [io 0x21a0-0x21bf] [ 0.162528] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.162570] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.162590] pci 0000:00:1d.7: reg 0x10: [mem 0xe3104c00-0xe3104fff] [ 0.162674] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.162720] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.162752] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.162834] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.162868] pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100 [ 0.162942] pci 0000:00:1f.0: address space collision: [io 0xf800-0xf87f] conflicts with ACPI CPU throttle [??? 0x0000f810-0x0000f815 flags 0x80000000] [ 0.162947] pci 0000:00:1f.0: quirk: [io 0xfa00-0xfa3f] claimed by ICH6 GPIO [ 0.162951] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 007f) [ 0.162954] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0480 (mask 000f) [ 0.162958] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0cb0 (mask 000f) [ 0.163053] pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400 [ 0.163071] pci 0000:00:1f.2: reg 0x10: [io 0x2200-0x2207] [ 0.163078] pci 0000:00:1f.2: reg 0x14: [io 0x2210-0x2213] [ 0.163086] pci 0000:00:1f.2: reg 0x18: [io 0x2208-0x220f] [ 0.163094] pci 0000:00:1f.2: reg 0x1c: [io 0x2214-0x2217] [ 0.163101] pci 0000:00:1f.2: reg 0x20: [io 0x21c0-0x21df] [ 0.163109] pci 0000:00:1f.2: reg 0x24: [mem 0xe3104000-0xe31047ff] [ 0.163152] pci 0000:00:1f.2: PME# supported from D3hot [ 0.163285] pci 0000:01:00.0: [10de:040f] type 00 class 0x030000 [ 0.163296] pci 0000:01:00.0: reg 0x10: [mem 0xe2000000-0xe2ffffff] [ 0.163307] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.163317] pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit] [ 0.163325] pci 0000:01:00.0: reg 0x24: [io 0x1100-0x117f] [ 0.163332] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.163408] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.163411] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 0.163415] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe2ffffff] [ 0.163418] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.163488] pci 0000:00:1c.0: PCI bridge to [bus 28] [ 0.163572] pci 0000:00:1c.4: PCI bridge to [bus 34] [ 0.163673] pci 0000:3f:00.0: [14e4:167b] type 00 class 0x020000 [ 0.163696] pci 0000:3f:00.0: reg 0x10: [mem 0xe3000000-0xe300ffff 64bit] [ 0.163822] pci 0000:3f:00.0: PME# supported from D3hot D3cold [ 0.168017] pci 0000:00:1c.5: PCI bridge to [bus 3f] [ 0.168025] pci 0000:00:1c.5: bridge window [mem 0xe3000000-0xe30fffff] [ 0.168184] pci 0000:10:0b.0: [11c1:5811] type 00 class 0x0c0010 [ 0.168201] pci 0000:10:0b.0: reg 0x10: [mem 0xe3200000-0xe3200fff] [ 0.168271] pci 0000:10:0b.0: supports D1 D2 [ 0.168273] pci 0000:10:0b.0: PME# supported from D0 D1 D2 D3hot [ 0.168337] pci 0000:00:1e.0: PCI bridge to [bus 10] (subtractive decode) [ 0.168343] pci 0000:00:1e.0: bridge window [mem 0xe3200000-0xe32fffff] [ 0.168349] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.168351] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) [ 0.168644] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.168704] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.168761] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.168817] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.168874] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.168930] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.168987] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.169043] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.169283] ACPI: \_SB_.PCI0: notify handler is installed [ 0.169313] Found 1 acpi root devices [ 0.170002] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.170002] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.170002] vgaarb: loaded [ 0.170002] vgaarb: bridge control possible 0000:01:00.0 [ 0.170002] SCSI subsystem initialized [ 0.170002] libata version 3.00 loaded. [ 0.170002] ACPI: bus type USB registered [ 0.170002] usbcore: registered new interface driver usbfs [ 0.170002] usbcore: registered new interface driver hub [ 0.170002] usbcore: registered new device driver usb [ 0.170002] PCI: Using ACPI for IRQ routing [ 0.170002] PCI: pci_cache_line_size set to 64 bytes [ 0.170002] e820: reserve RAM buffer [mem 0x00098000-0x0009ffff] [ 0.170002] e820: reserve RAM buffer [mem 0xbefc1da0-0xbfffffff] [ 0.172006] NetLabel: Initializing [ 0.172008] NetLabel: domain hash size = 128 [ 0.172009] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.172024] NetLabel: unlabeled traffic allowed by default [ 0.172065] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.172070] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.172074] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.174089] Switched to clocksource hpet [ 0.178281] AppArmor: AppArmor Filesystem Enabled [ 0.178313] pnp: PnP ACPI init [ 0.178328] ACPI: bus type PNP registered [ 0.178398] pnp 00:00: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.178411] pnp 00:01: [dma 4] [ 0.178429] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.178458] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.178480] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.178508] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active) [ 0.178535] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.178772] pnp 00:06: [dma 3] [ 0.178833] pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.179054] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) [ 0.179200] pnp 00:08: [dma 2] [ 0.179227] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.179287] pnp 00:09: Plug and Play ACPI device, IDs PNP0003 (active) [ 0.179334] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.179541] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.179567] pnp 00:0c: disabling [io 0xf800-0xf81f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f] [ 0.179570] pnp 00:0c: disabling [io 0xf820-0xf83f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f] [ 0.179573] pnp 00:0c: disabling [io 0xf840-0xf85f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f] [ 0.179576] pnp 00:0c: disabling [io 0xf860-0xf87f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f] [ 0.179604] system 00:0c: [io 0x0400-0x041f] has been reserved [ 0.179607] system 00:0c: [io 0x0420-0x043f] has been reserved [ 0.179609] system 00:0c: [io 0x0440-0x045f] has been reserved [ 0.179612] system 00:0c: [io 0x0460-0x047f] has been reserved [ 0.179614] system 00:0c: [io 0x0480-0x048f] has been reserved [ 0.179617] system 00:0c: [io 0xfa00-0xfa3f] has been reserved [ 0.179619] system 00:0c: [io 0xfc00-0xfc7f] has been reserved [ 0.179622] system 00:0c: [io 0xfc80-0xfcff] has been reserved [ 0.179624] system 00:0c: [io 0xfe00-0xfe7f] has been reserved [ 0.179627] system 00:0c: [io 0xfe80-0xfeff] has been reserved [ 0.179630] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.179679] system 00:0d: [io 0x04d0-0x04d1] has been reserved [ 0.179681] system 00:0d: [io 0x0cb0-0x0cbf] has been reserved [ 0.179684] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.184113] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.184119] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.184123] system 00:0e: [mem 0x000e4000-0x000fffff] could not be reserved [ 0.184127] system 00:0e: [mem 0xfec01000-0xfecfffff] has been reserved [ 0.184131] system 00:0e: [mem 0xfed00400-0xfed3ffff] has been reserved [ 0.184135] system 00:0e: [mem 0xfed40000-0xffffffff] could not be reserved [ 0.184139] system 00:0e: [mem 0xf4000000-0xf7ffffff] has been reserved [ 0.184142] system 00:0e: [mem 0x000cfc00-0x000cffff] has been reserved [ 0.184146] system 00:0e: [mem 0x000d5200-0x000e3fff] has been reserved [ 0.184151] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.184167] pnp: PnP ACPI: found 15 devices [ 0.184169] ACPI: bus type PNP unregistered [ 0.191842] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 28] add_size 1000 [ 0.191846] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 28] add_size 200000 [ 0.191849] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 28] add_size 200000 [ 0.191857] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 34] add_size 1000 [ 0.191860] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 34] add_size 200000 [ 0.191863] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 34] add_size 200000 [ 0.191870] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 3f] add_size 1000 [ 0.191873] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3f] add_size 200000 [ 0.191884] pci 0000:00:1f.0: BAR 13: [io 0xf800-0xf87f] has bogus alignment [ 0.191887] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.191890] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.191892] pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.191895] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.191898] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.191900] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.191902] pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.191905] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.191910] pci 0000:00:1c.0: BAR 14: assigned [mem 0xe3300000-0xe34fffff] [ 0.191913] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe3500000-0xe36fffff 64bit pref] [ 0.191916] pci 0000:00:1c.4: BAR 14: assigned [mem 0xe3700000-0xe38fffff] [ 0.191919] pci 0000:00:1c.4: BAR 15: assigned [mem 0xe3900000-0xe3afffff 64bit pref] [ 0.191922] pci 0000:00:1c.5: BAR 15: assigned [mem 0xe3b00000-0xe3cfffff 64bit pref] [ 0.191925] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff] [ 0.191928] pci 0000:00:1c.4: BAR 13: assigned [io 0x4000-0x4fff] [ 0.191930] pci 0000:00:1c.5: BAR 13: assigned [io 0x5000-0x5fff] [ 0.191935] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000) [ 0.191937] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.191940] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 0.191944] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe2ffffff] [ 0.191947] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.191951] pci 0000:00:1c.0: PCI bridge to [bus 28] [ 0.191954] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.191959] pci 0000:00:1c.0: bridge window [mem 0xe3300000-0xe34fffff] [ 0.191963] pci 0000:00:1c.0: bridge window [mem 0xe3500000-0xe36fffff 64bit pref] [ 0.191968] pci 0000:00:1c.4: PCI bridge to [bus 34] [ 0.191971] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] [ 0.191975] pci 0000:00:1c.4: bridge window [mem 0xe3700000-0xe38fffff] [ 0.191979] pci 0000:00:1c.4: bridge window [mem 0xe3900000-0xe3afffff 64bit pref] [ 0.191985] pci 0000:00:1c.5: PCI bridge to [bus 3f] [ 0.191987] pci 0000:00:1c.5: bridge window [io 0x5000-0x5fff] [ 0.191992] pci 0000:00:1c.5: bridge window [mem 0xe3000000-0xe30fffff] [ 0.191996] pci 0000:00:1c.5: bridge window [mem 0xe3b00000-0xe3cfffff 64bit pref] [ 0.192002] pci 0000:00:1e.0: PCI bridge to [bus 10] [ 0.192008] pci 0000:00:1e.0: bridge window [mem 0xe3200000-0xe32fffff] [ 0.192016] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.192018] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff] [ 0.192021] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.192023] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe2ffffff] [ 0.192025] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.192027] pci_bus 0000:28: resource 0 [io 0x3000-0x3fff] [ 0.192030] pci_bus 0000:28: resource 1 [mem 0xe3300000-0xe34fffff] [ 0.192032] pci_bus 0000:28: resource 2 [mem 0xe3500000-0xe36fffff 64bit pref] [ 0.192034] pci_bus 0000:34: resource 0 [io 0x4000-0x4fff] [ 0.192036] pci_bus 0000:34: resource 1 [mem 0xe3700000-0xe38fffff] [ 0.192039] pci_bus 0000:34: resource 2 [mem 0xe3900000-0xe3afffff 64bit pref] [ 0.192041] pci_bus 0000:3f: resource 0 [io 0x5000-0x5fff] [ 0.192043] pci_bus 0000:3f: resource 1 [mem 0xe3000000-0xe30fffff] [ 0.192045] pci_bus 0000:3f: resource 2 [mem 0xe3b00000-0xe3cfffff 64bit pref] [ 0.192048] pci_bus 0000:10: resource 1 [mem 0xe3200000-0xe32fffff] [ 0.192050] pci_bus 0000:10: resource 4 [io 0x0000-0xffff] [ 0.192052] pci_bus 0000:10: resource 5 [mem 0x00000000-0xfffffffff] [ 0.192088] NET: Registered protocol family 2 [ 0.192318] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.192564] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.192871] TCP: Hash tables configured (established 65536 bind 65536) [ 0.192911] TCP: reno registered [ 0.192926] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.192979] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.193094] NET: Registered protocol family 1 [ 0.194699] pci 0000:01:00.0: Video device with shadowed ROM [ 0.194707] PCI: CLS 64 bytes, default 64 [ 0.194803] Trying to unpack rootfs image as initramfs... [ 0.533101] Freeing initrd memory: 18756K (ffff880035b4e000 - ffff880036d9f000) [ 0.533111] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.533114] software IO TLB [mem 0xbafc1000-0xbefc1000] (64MB) mapped at [ffff8800bafc1000-ffff8800befc0fff] [ 0.533430] microcode: CPU0 sig=0x6fb, pf=0x10, revision=0xb3 [ 0.533444] microcode: CPU1 sig=0x6fb, pf=0x10, revision=0xb3 [ 0.533457] microcode: CPU2 sig=0x6fb, pf=0x10, revision=0xb3 [ 0.533469] microcode: CPU3 sig=0x6fb, pf=0x10, revision=0xb3 [ 0.533549] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.533553] Scanning for low memory corruption every 60 seconds [ 0.533856] Initialise system trusted keyring [ 0.533909] audit: initializing netlink socket (disabled) [ 0.533925] type=2000 audit(1426570651.532:1): initialized [ 0.563421] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.564873] zbud: loaded [ 0.565048] VFS: Disk quotas dquot_6.5.2 [ 0.565093] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.565605] fuse init (API version 7.22) [ 0.565714] msgmni has been set to 15932 [ 0.565790] Key type big_key registered [ 0.566367] Key type asymmetric registered [ 0.566369] Asymmetric key parser 'x509' registered [ 0.566401] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.566456] io scheduler noop registered [ 0.566459] io scheduler deadline registered (default) [ 0.566497] io scheduler cfq registered [ 0.566809] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.566878] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.567032] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X [ 0.567187] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X [ 0.567255] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.567270] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.567310] vesafb: mode is 1680x1050x32, linelength=6720, pages=0 [ 0.567311] vesafb: scrolling: redraw [ 0.567314] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.567893] vesafb: framebuffer at 0xe1000000, mapped to 0xffffc90004e80000, using 6912k, total 6912k [ 0.621507] Console: switching to colour frame buffer device 210x65 [ 0.674764] fb0: VESA VGA frame buffer device [ 0.674780] intel_idle: does not run on family 6 model 15 [ 0.674786] ipmi message handler version 39.2 [ 0.674868] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.674873] ACPI: Power Button [PBTN] [ 0.674907] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.674910] ACPI: Power Button [PWRF] [ 0.674972] tsc: Marking TSC unstable due to TSC halts in idle [ 0.674978] ACPI: acpi_idle registered with cpuidle [ 0.675271] GHES: HEST is not enabled! [ 0.675373] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.695761] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.697183] Linux agpgart interface v0.103 [ 0.698573] brd: module loaded [ 0.699287] loop: module loaded [ 0.699672] libphy: Fixed MDIO Bus: probed [ 0.699764] tun: Universal TUN/TAP device driver, 1.6 [ 0.699766] tun: (C) 1999-2004 Max Krasnyansky [ 0.699813] PPP generic driver version 2.4.2 [ 0.699860] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.699864] ehci-pci: EHCI PCI platform driver [ 0.700011] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 0.700018] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.700037] ehci-pci 0000:00:1a.7: debug port 1 [ 0.703943] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 0.703962] ehci-pci 0000:00:1a.7: irq 22, io mem 0xe3104800 [ 0.712026] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.712085] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.712089] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.712092] usb usb1: Product: EHCI Host Controller [ 0.712095] usb usb1: Manufacturer: Linux 3.13.0-46-generic ehci_hcd [ 0.712098] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.712227] hub 1-0:1.0: USB hub found [ 0.712234] hub 1-0:1.0: 6 ports detected [ 0.712468] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.712473] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.712485] ehci-pci 0000:00:1d.7: debug port 1 [ 0.716390] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 0.716403] ehci-pci 0000:00:1d.7: irq 20, io mem 0xe3104c00 [ 0.728025] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.728083] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.728087] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.728090] usb usb2: Product: EHCI Host Controller [ 0.728094] usb usb2: Manufacturer: Linux 3.13.0-46-generic ehci_hcd [ 0.728097] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.728223] hub 2-0:1.0: USB hub found [ 0.728230] hub 2-0:1.0: 6 ports detected [ 0.728345] ehci-platform: EHCI generic platform driver [ 0.728355] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.728357] ohci-pci: OHCI PCI platform driver [ 0.728366] ohci-platform: OHCI generic platform driver [ 0.728372] uhci_hcd: USB Universal Host Controller Interface driver [ 0.728487] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.728493] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.728515] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00002100 [ 0.728557] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.728560] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.728562] usb usb3: Product: UHCI Host Controller [ 0.728564] usb usb3: Manufacturer: Linux 3.13.0-46-generic uhci_hcd [ 0.728566] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.728650] hub 3-0:1.0: USB hub found [ 0.728657] hub 3-0:1.0: 2 ports detected [ 0.728830] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.728836] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.728867] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00002120 [ 0.728910] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.728912] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.728915] usb usb4: Product: UHCI Host Controller [ 0.728917] usb usb4: Manufacturer: Linux 3.13.0-46-generic uhci_hcd [ 0.728919] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.729012] hub 4-0:1.0: USB hub found [ 0.729018] hub 4-0:1.0: 2 ports detected [ 0.729193] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.729199] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.729220] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00002140 [ 0.729261] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.729264] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.729266] usb usb5: Product: UHCI Host Controller [ 0.729268] usb usb5: Manufacturer: Linux 3.13.0-46-generic uhci_hcd [ 0.729270] usb usb5: SerialNumber: 0000:00:1a.2 [ 0.729351] hub 5-0:1.0: USB hub found [ 0.729359] hub 5-0:1.0: 2 ports detected [ 0.729533] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.729539] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.729559] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00002160 [ 0.729601] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.729604] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.729606] usb usb6: Product: UHCI Host Controller [ 0.729608] usb usb6: Manufacturer: Linux 3.13.0-46-generic uhci_hcd [ 0.729610] usb usb6: SerialNumber: 0000:00:1d.0 [ 0.729691] hub 6-0:1.0: USB hub found [ 0.729697] hub 6-0:1.0: 2 ports detected [ 0.729868] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.729873] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.729894] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00002180 [ 0.729935] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.729938] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.729940] usb usb7: Product: UHCI Host Controller [ 0.729943] usb usb7: Manufacturer: Linux 3.13.0-46-generic uhci_hcd [ 0.729945] usb usb7: SerialNumber: 0000:00:1d.1 [ 0.730025] hub 7-0:1.0: USB hub found [ 0.730032] hub 7-0:1.0: 2 ports detected [ 0.730206] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.730212] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.730233] uhci_hcd 0000:00:1d.2: irq 22, io base 0x000021a0 [ 0.730276] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.730279] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.730281] usb usb8: Product: UHCI Host Controller [ 0.730283] usb usb8: Manufacturer: Linux 3.13.0-46-generic uhci_hcd [ 0.730285] usb usb8: SerialNumber: 0000:00:1d.2 [ 0.730375] hub 8-0:1.0: USB hub found [ 0.730382] hub 8-0:1.0: 2 ports detected [ 0.730508] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 0.733070] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.733076] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.733235] mousedev: PS/2 mouse device common for all mice [ 0.733439] rtc_cmos 00:02: RTC can wake from S4 [ 0.733580] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.733610] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.733690] device-mapper: uevent: version 1.0.3 [ 0.733784] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 0.733794] ledtrig-cpu: registered to indicate activity on CPUs [ 0.733907] TCP: cubic registered [ 0.734002] NET: Registered protocol family 10 [ 0.734185] NET: Registered protocol family 17 [ 0.734197] Key type dns_resolver registered [ 0.734524] Loading compiled-in X.509 certificates [ 0.735640] Loaded X.509 cert 'Magrathea: Glacier signing key: c7613364bc2aa19d70bf0c6e59bf8acaff65c879' [ 0.735662] registered taskstats version 1 [ 0.738219] Key type trusted registered [ 0.742197] Key type encrypted registered [ 0.742202] AppArmor: AppArmor sha1 policy hashing enabled [ 0.742205] IMA: No TPM chip found, activating TPM-bypass! [ 0.742539] regulator-dummy: disabling [ 0.742605] Magic number: 7:367:618 [ 0.742739] rtc_cmos 00:02: setting system clock to 2015-03-17 05:37:32 UTC (1426570652) [ 0.804410] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.804412] EDD information not available. [ 0.804439] PM: Hibernation image not present or could not be loaded. [ 0.806004] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000) [ 0.806006] Write protecting the kernel read-only data: 12288k [ 0.808433] Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000) [ 0.810476] Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000) [ 0.824350] systemd-udevd[114]: starting version 204 [ 0.846679] pps_core: LinuxPPS API ver. 1 registered [ 0.846682] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.848801] PTP clock support registered [ 0.853234] ahci 0000:00:1f.2: version 3.0 [ 0.853409] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X [ 0.853421] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF [ 0.853493] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode [ 0.853498] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ccc sxs [ 0.853521] tg3.c:v3.134 (Sep 16, 2013) [ 0.854298] scsi0 : ahci [ 0.854413] scsi1 : ahci [ 0.854506] scsi2 : ahci [ 0.854728] scsi3 : ahci [ 0.854826] scsi4 : ahci [ 0.854912] scsi5 : ahci [ 0.854959] ata1: SATA max UDMA/133 abar m2048@0xe3104000 port 0xe3104100 irq 44 [ 0.854962] ata2: SATA max UDMA/133 abar m2048@0xe3104000 port 0xe3104180 irq 44 [ 0.854964] ata3: SATA max UDMA/133 abar m2048@0xe3104000 port 0xe3104200 irq 44 [ 0.854967] ata4: SATA max UDMA/133 abar m2048@0xe3104000 port 0xe3104280 irq 44 [ 0.854969] ata5: SATA max UDMA/133 abar m2048@0xe3104000 port 0xe3104300 irq 44 [ 0.854971] ata6: SATA max UDMA/133 abar m2048@0xe3104000 port 0xe3104380 irq 44 [ 0.862193] FDC 0 is a post-1991 82077 [ 0.884709] tg3 0000:3f:00.0 eth0: Tigon3 [partno(BCM95755) rev a002] (PCI Express) MAC address 00:1e:0b:32:77:5b [ 0.884714] tg3 0000:3f:00.0 eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 0.884717] tg3 0000:3f:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 0.884719] tg3 0000:3f:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 0.908066] firewire_ohci 0000:10:0b.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 [ 1.028038] usb 1-2: new high-speed USB device number 2 using ehci-pci [ 1.172042] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.172061] ata4: SATA link down (SStatus 0 SControl 300) [ 1.172081] ata6: SATA link down (SStatus 0 SControl 300) [ 1.172097] ata5: SATA link down (SStatus 0 SControl 300) [ 1.174099] ata3.00: ATA-8: WDC WD1001FALS-00E3A0, 05.01D05, max UDMA/133 [ 1.174103] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.176062] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.176079] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.176658] ata3.00: configured for UDMA/133 [ 1.176670] ata2.00: ATAPI: TSSTcorp CDDVDW TS-H653N, HB01, max UDMA/100 [ 1.176850] ata1.00: ATA-7: ST3500630AS, 3.CHN, max UDMA/100 [ 1.176857] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.177552] ata2.00: configured for UDMA/100 [ 1.177811] ata1.00: configured for UDMA/100 [ 1.177992] scsi 0:0:0:0: Direct-Access ATA ST3500630AS 3.CH PQ: 0 ANSI: 5 [ 1.178216] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.178241] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.178268] sd 0:0:0:0: [sda] Write Protect is off [ 1.178271] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.178302] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.178908] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-H653N HB01 PQ: 0 ANSI: 5 [ 1.181421] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.181424] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.181584] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.181688] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.181762] usb 1-2: New USB device found, idVendor=0bda, idProduct=0111 [ 1.181765] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.181767] usb 1-2: Product: USB2.0-CRW [ 1.181769] usb 1-2: Manufacturer: Generic [ 1.181771] usb 1-2: SerialNumber: 20021111153705700 [ 1.181862] scsi 2:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5 [ 1.181979] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.182019] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.182030] sd 2:0:0:0: [sdb] Write Protect is off [ 1.182033] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.182111] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.186555] usb-storage 1-2:1.0: USB Mass Storage device detected [ 1.186652] scsi6 : usb-storage 1-2:1.0 [ 1.186750] usbcore: registered new interface driver usb-storage [ 1.207189] sdb: sdb1 sdb2 sdb3 [ 1.207599] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1.224818] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 1.225285] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.408151] firewire_core 0000:10:0b.0: created device fw0: GUID 0030bd051503ffe7, S400 [ 1.740034] usb 5-2: new low-speed USB device number 2 using uhci_hcd [ 1.965262] usb 5-2: New USB device found, idVendor=04d9, idProduct=a086 [ 1.965267] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.965271] usb 5-2: Product: USB Wireless Device [ 1.965274] usb 5-2: Manufacturer: HOLTEK [ 1.974566] hidraw: raw HID events driver (C) Jiri Kosina [ 2.014559] usbcore: registered new interface driver usbhid [ 2.014561] usbhid: USB HID core driver [ 2.016308] input: HOLTEK USB Wireless Device as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input5 [ 2.016418] hid-generic 0003:04D9:A086.0001: input,hidraw0: USB HID v1.10 Mouse [HOLTEK USB Wireless Device] on usb-0000:00:1a.2-2/input0 [ 2.174560] random: nonblocking pool is initialized [ 2.190664] scsi 6:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS [ 2.197157] scsi 6:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS [ 2.203778] scsi 6:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS [ 2.208046] usb 6-1: new full-speed USB device number 2 using uhci_hcd [ 2.210408] scsi 6:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS [ 2.210693] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 2.210928] sd 6:0:0:1: Attached scsi generic sg4 type 0 [ 2.211067] sd 6:0:0:2: Attached scsi generic sg5 type 0 [ 2.211222] sd 6:0:0:3: Attached scsi generic sg6 type 0 [ 2.235407] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 2.236276] sd 6:0:0:1: [sdd] Attached SCSI removable disk [ 2.237151] sd 6:0:0:2: [sde] Attached SCSI removable disk [ 2.238026] sd 6:0:0:3: [sdf] Attached SCSI removable disk [ 2.377569] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 2.382415] usb 6-1: New USB device found, idVendor=413c, idProduct=1005 [ 2.382420] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.382423] usb 6-1: Product: Dell Multimedia Pro Keyboard Hub [ 2.382425] usb 6-1: Manufacturer: Dell [ 2.390617] hub 6-1:1.0: USB hub found [ 2.391598] hub 6-1:1.0: 3 ports detected [ 2.725603] usb 6-1.1: new low-speed USB device number 3 using uhci_hcd [ 2.868599] usb 6-1.1: New USB device found, idVendor=413c, idProduct=2011 [ 2.868604] usb 6-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.868608] usb 6-1.1: Product: Dell Multimedia Pro Keyboard [ 2.868611] usb 6-1.1: Manufacturer: Dell [ 2.907085] input: Dell Dell Multimedia Pro Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.0/input/input6 [ 2.907191] hid-generic 0003:413C:2011.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell Multimedia Pro Keyboard] on usb-0000:00:1d.0-1.1/input0 [ 2.958661] input: Dell Dell Multimedia Pro Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.1/input/input7 [ 2.958767] hid-generic 0003:413C:2011.0003: input,hidraw2: USB HID v1.10 Device [Dell Dell Multimedia Pro Keyboard] on usb-0000:00:1d.0-1.1/input1 [ 3.500532] ata3.00: exception Emask 0x0 SAct 0x10 SErr 0x0 action 0x0 [ 3.500535] ata3.00: irq_stat 0x40000008 [ 3.500540] ata3.00: failed command: READ FPDMA QUEUED [ 3.500547] ata3.00: cmd 60/08:20:00:18:09/00:00:3d:00:00/40 tag 4 ncq 4096 in [ 3.500547] res 41/40:00:00:18:09/00:00:3d:00:00/40 Emask 0x409 (media error) [ 3.500551] ata3.00: status: { DRDY ERR } [ 3.500553] ata3.00: error: { UNC } [ 3.504961] ata3.00: configured for UDMA/133 [ 3.504975] sd 2:0:0:0: [sdb] Unhandled sense code [ 3.504978] sd 2:0:0:0: [sdb] [ 3.504981] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3.504984] sd 2:0:0:0: [sdb] [ 3.504985] Sense Key : Medium Error [current] [descriptor] [ 3.504990] Descriptor sense data with sense descriptors (in hex): [ 3.504992] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 3.505003] 3d 09 18 00 [ 3.505008] sd 2:0:0:0: [sdb] [ 3.505012] Add. Sense: Unrecovered read error - auto reallocate failed [ 3.505015] sd 2:0:0:0: [sdb] CDB: [ 3.505017] Read(10): 28 00 3d 09 18 00 00 00 08 00 [ 3.505027] end_request: I/O error, dev sdb, sector 1024006144 [ 3.505031] Buffer I/O error on device sdb3, logical block 512 [ 3.505046] ata3: EH complete [ 5.450429] ata3.00: exception Emask 0x0 SAct 0x20 SErr 0x0 action 0x0 [ 5.450433] ata3.00: irq_stat 0x40000008 [ 5.450438] ata3.00: failed command: READ FPDMA QUEUED [ 5.450445] ata3.00: cmd 60/08:28:00:18:09/00:00:3d:00:00/40 tag 5 ncq 4096 in [ 5.450445] res 41/40:00:00:18:09/00:00:3d:00:00/40 Emask 0x409 (media error) [ 5.450449] ata3.00: status: { DRDY ERR } [ 5.450451] ata3.00: error: { UNC } [ 5.454891] ata3.00: configured for UDMA/133 [ 5.454903] sd 2:0:0:0: [sdb] Unhandled sense code [ 5.454907] sd 2:0:0:0: [sdb] [ 5.454909] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 5.454912] sd 2:0:0:0: [sdb] [ 5.454914] Sense Key : Medium Error [current] [descriptor] [ 5.454918] Descriptor sense data with sense descriptors (in hex): [ 5.454920] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 5.454932] 3d 09 18 00 [ 5.454937] sd 2:0:0:0: [sdb] [ 5.454940] Add. Sense: Unrecovered read error - auto reallocate failed [ 5.454944] sd 2:0:0:0: [sdb] CDB: [ 5.454946] Read(10): 28 00 3d 09 18 00 00 00 08 00 [ 5.454956] end_request: I/O error, dev sdb, sector 1024006144 [ 5.454960] Buffer I/O error on device sdb3, logical block 512 [ 5.454975] ata3: EH complete [ 7.256580] init: plymouth-upstart-bridge main process (192) terminated with status 1 [ 7.256593] init: plymouth-upstart-bridge main process ended, respawning [ 7.258839] init: plymouth-upstart-bridge main process (206) terminated with status 1 [ 7.258850] init: plymouth-upstart-bridge main process ended, respawning [ 7.260898] init: plymouth-upstart-bridge main process (208) terminated with status 1 [ 7.260909] init: plymouth-upstart-bridge main process ended, respawning [ 7.262957] init: plymouth-upstart-bridge main process (209) terminated with status 1 [ 7.262968] init: plymouth-upstart-bridge main process ended, respawning [ 7.265047] init: plymouth-upstart-bridge main process (211) terminated with status 1 [ 7.265058] init: plymouth-upstart-bridge main process ended, respawning [ 7.267142] init: plymouth-upstart-bridge main process (212) terminated with status 1 [ 7.267153] init: plymouth-upstart-bridge main process ended, respawning [ 7.269273] init: plymouth-upstart-bridge main process (214) terminated with status 1 [ 7.269285] init: plymouth-upstart-bridge main process ended, respawning [ 7.271338] init: plymouth-upstart-bridge main process (215) terminated with status 1 [ 7.271349] init: plymouth-upstart-bridge main process ended, respawning [ 7.273434] init: plymouth-upstart-bridge main process (217) terminated with status 1 [ 7.273445] init: plymouth-upstart-bridge main process ended, respawning [ 7.275497] init: plymouth-upstart-bridge main process (218) terminated with status 1 [ 7.275509] init: plymouth-upstart-bridge main process ended, respawning [ 7.277488] init: plymouth-upstart-bridge main process (220) terminated with status 1 [ 7.277498] init: plymouth-upstart-bridge respawning too fast, stopped [ 13.731902] Adding 6142972k swap on /dev/sda6. Priority:-1 extents:1 across:6142972k FS [ 13.780424] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.837031] systemd-udevd[320]: starting version 204 [ 14.030182] lp: driver loaded but no devices found [ 14.036807] ppdev: user-space parallel port driver [ 14.039821] parport_pc 00:06: reported by Plug and Play ACPI [ 14.039879] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 14.046054] EDAC MC: Ver: 3.0.0 [ 14.050167] EDAC MC0: Giving out device to module x38_edac controller x38: DEV 0000:00:00.0 (POLLED) [ 14.055893] wmi: Mapper loaded [ 14.069540] [drm] Initialized drm 1.1.0 20060810 [ 14.101801] checking generic (e1000000 6c0000) vs hw (c0000000 20000000) [ 14.101805] checking generic (e1000000 6c0000) vs hw (e0000000 2000000) [ 14.101807] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver [ 14.101830] Console: switching to colour dummy device 80x25 [ 14.105907] [drm] hdmi device not found 1 0 1 [ 14.106037] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x084f00a2 [ 14.106040] nouveau [ DEVICE][0000:01:00.0] Chipset: G84 (NV84) [ 14.106042] nouveau [ DEVICE][0000:01:00.0] Family : NV50 [ 14.108138] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image... [ 14.121762] kvm: disabled by bios [ 14.126889] coretemp coretemp.0: Using relative temperature scale! [ 14.126902] coretemp coretemp.0: Using relative temperature scale! [ 14.126912] coretemp coretemp.0: Using relative temperature scale! [ 14.126924] coretemp coretemp.0: Using relative temperature scale! [ 14.142375] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 14.142593] lp0: using parport0 (interrupt-driven). [ 14.156345] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid [ 14.156349] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN [ 14.156456] nouveau [ VBIOS][0000:01:00.0] BIT signature found [ 14.156459] nouveau [ VBIOS][0000:01:00.0] version 60.84.6a.00.12 [ 14.166361] hda_codec: ALC262: SKU not ready 0x411111f0 [ 14.166732] autoconfig: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:line [ 14.166733] speaker_outs=1 (0x16/0x0/0x0/0x0/0x0) [ 14.166735] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 14.166736] mono: mono_out=0x0 [ 14.166737] inputs: [ 14.166739] Rear Mic=0x18 [ 14.166741] Front Mic=0x19 [ 14.166743] Line=0x1a [ 14.166744] CD=0x1c [ 14.166746] Aux=0x14 [ 14.166747] realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d [ 14.166748] realtek: Enable default setup for auto mode as fallback [ 14.175785] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 14.175862] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 14.175917] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 14.175973] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 14.176039] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 14.176770] nouveau 0000:01:00.0: irq 46 for MSI/MSI-X [ 14.176782] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled [ 14.176817] nouveau [ PFB][0000:01:00.0] RAM type: DDR2 [ 14.176819] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB [ 14.176821] nouveau [ PFB][0000:01:00.0] ZCOMP: 1892 tags [ 14.181551] nouveau [ VOLT][0000:01:00.0] GPU voltage: 1200000uv [ 14.203268] adt7475 2-002e: ADT7473 device, revision 0 [ 14.203272] adt7475 2-002e: Optional features: fan4 [ 14.208224] nouveau [ PTHERM][0000:01:00.0] Found an adt7473 at address 0x2e (controlled by lm_sensors, temp offset +7 C) [ 14.208227] nouveau [ I2C][0000:01:00.0] detected monitoring device: adt7473 [ 14.208234] nouveau [ PTHERM][0000:01:00.0] FAN control: PWM [ 14.208244] nouveau [ PTHERM][0000:01:00.0] fan management: automatic [ 14.208248] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes [ 14.208258] nouveau [ CLK][0000:01:00.0] 20: core 208 MHz shader 416 MHz memory 100 MHz [ 14.208262] nouveau [ CLK][0000:01:00.0] 21: core 460 MHz shader 920 MHz memory 400 MHz [ 14.208302] nouveau [ CLK][0000:01:00.0] --: core 459 MHz shader 918 MHz memory 399 MHz [ 14.208463] [TTM] Zone kernel: Available graphics memory: 4080088 kiB [ 14.208465] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 14.208466] [TTM] Initializing pool allocator [ 14.208471] [TTM] Initializing DMA pool allocator [ 14.208481] nouveau [ DRM] VRAM: 512 MiB [ 14.208483] nouveau [ DRM] GART: 1048576 MiB [ 14.208487] nouveau [ DRM] TMDS table version 2.0 [ 14.208489] nouveau [ DRM] DCB version 4.0 [ 14.208492] nouveau [ DRM] DCB outp 00: 02000300 00000028 [ 14.208494] nouveau [ DRM] DCB outp 01: 01000302 00000030 [ 14.208496] nouveau [ DRM] DCB outp 02: 04011310 00000028 [ 14.208498] nouveau [ DRM] DCB outp 03: 02011312 00000030 [ 14.208500] nouveau [ DRM] DCB outp 04: 010223f1 00c0c080 [ 14.208502] nouveau [ DRM] DCB conn 00: 1030 [ 14.208505] nouveau [ DRM] DCB conn 01: 2130 [ 14.208507] nouveau [ DRM] DCB conn 02: 0210 [ 14.208509] nouveau [ DRM] DCB conn 03: 0211 [ 14.208511] nouveau [ DRM] DCB conn 04: 0213 [ 14.218985] nouveau W[ DRM] failed to create encoder 0/1/0: -19 [ 14.218988] nouveau W[ DRM] TV-1 has no encoders, removing [ 14.219016] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 14.219017] [drm] No driver support for vblank timestamp query. [ 14.285761] gpio_ich: GPIO from 195 to 255 on gpio_ich [ 14.368697] input: HP WMI hotkeys as /devices/virtual/input/input13 [ 14.402158] type=1400 audit(1426570666.156:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=418 comm="apparmor_parser" [ 14.402166] type=1400 audit(1426570666.156:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=418 comm="apparmor_parser" [ 14.402171] type=1400 audit(1426570666.156:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=418 comm="apparmor_parser" [ 14.402181] type=1400 audit(1426570666.156:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=389 comm="apparmor_parser" [ 14.402188] type=1400 audit(1426570666.156:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=389 comm="apparmor_parser" [ 14.402193] type=1400 audit(1426570666.156:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=389 comm="apparmor_parser" [ 14.402628] type=1400 audit(1426570666.156:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=418 comm="apparmor_parser" [ 14.402634] type=1400 audit(1426570666.156:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=418 comm="apparmor_parser" [ 14.402649] type=1400 audit(1426570666.156:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=389 comm="apparmor_parser" [ 14.402655] type=1400 audit(1426570666.156:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=389 comm="apparmor_parser" [ 14.486702] nouveau [ DRM] MM: using CRYPT for buffer copies [ 14.532939] nouveau [ DRM] allocated 1680x1050 fb: 0x70000, bo ffff8802336b3400 [ 14.533038] fbcon: nouveaufb (fb0) is primary device [ 14.592241] Console: switching to colour frame buffer device 210x65 [ 14.593575] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 14.593577] nouveau 0000:01:00.0: registered panic notifier [ 14.593582] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 0 [ 18.562444] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 18.780557] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 18.853104] init: failsafe main process (679) killed by TERM signal [ 18.958371] Bluetooth: Core ver 2.17 [ 18.958398] NET: Registered protocol family 31 [ 18.958400] Bluetooth: HCI device and connection manager initialized [ 18.958411] Bluetooth: HCI socket layer initialized [ 18.958414] Bluetooth: L2CAP socket layer initialized [ 18.958419] Bluetooth: SCO socket layer initialized [ 18.962076] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 18.962079] Bluetooth: BNEP filters: protocol multicast [ 18.962087] Bluetooth: BNEP socket layer initialized [ 18.963226] Bluetooth: RFCOMM TTY layer initialized [ 18.963240] Bluetooth: RFCOMM socket layer initialized [ 18.963247] Bluetooth: RFCOMM ver 1.11 [ 19.274679] init: cups main process (788) killed by HUP signal [ 19.274692] init: cups main process ended, respawning [ 19.798488] init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory [ 19.891220] audit_printk_skb: 165 callbacks suppressed [ 19.891224] type=1400 audit(1426570671.644:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=979 comm="apparmor_parser" [ 20.319226] tg3 0000:3f:00.0: irq 47 for MSI/MSI-X [ 20.368089] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.368391] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.573333] tg3 0000:3f:00.0 eth0: Link is up at 1000 Mbps, full duplex [ 23.573342] tg3 0000:3f:00.0 eth0: Flow control is on for TX and on for RX [ 23.573360] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 27.453803] init: plexmediaserver main process (1560) terminated with status 2 [ 27.453819] init: plexmediaserver main process ended, respawning [ 27.468608] init: plexmediaserver main process (1583) terminated with status 2 [ 27.468621] init: plexmediaserver main process ended, respawning [ 27.478370] init: plexmediaserver main process (1594) terminated with status 2 [ 27.478382] init: plexmediaserver main process ended, respawning [ 27.484448] init: plexmediaserver main process (1598) terminated with status 2 [ 27.484460] init: plexmediaserver main process ended, respawning [ 27.490555] init: plexmediaserver main process (1602) terminated with status 2 [ 27.490569] init: plexmediaserver main process ended, respawning [ 27.496760] init: plexmediaserver main process (1605) terminated with status 2 [ 27.496771] init: plexmediaserver main process ended, respawning [ 27.502793] init: plexmediaserver main process (1608) terminated with status 2 [ 27.502805] init: plexmediaserver main process ended, respawning [ 27.508817] init: plexmediaserver main process (1611) terminated with status 2 [ 27.508829] init: plexmediaserver main process ended, respawning [ 27.514896] init: plexmediaserver main process (1614) terminated with status 2 [ 27.514907] init: plexmediaserver main process ended, respawning [ 27.520971] init: plexmediaserver main process (1617) terminated with status 2 [ 27.520982] init: plexmediaserver main process ended, respawning [ 27.527099] init: plexmediaserver main process (1620) terminated with status 2 [ 27.527110] init: plexmediaserver respawning too fast, stopped [ 39.810325] ata3.00: exception Emask 0x0 SAct 0x8000 SErr 0x0 action 0x0 [ 39.810332] ata3.00: irq_stat 0x40000008 [ 39.810337] ata3.00: failed command: READ FPDMA QUEUED [ 39.810344] ata3.00: cmd 60/08:78:00:18:09/00:00:3d:00:00/40 tag 15 ncq 4096 in [ 39.810344] res 41/40:00:00:18:09/00:00:3d:00:00/40 Emask 0x409 (media error) [ 39.810348] ata3.00: status: { DRDY ERR } [ 39.810351] ata3.00: error: { UNC } [ 39.815527] ata3.00: configured for UDMA/133 [ 39.815539] sd 2:0:0:0: [sdb] Unhandled sense code [ 39.815543] sd 2:0:0:0: [sdb] [ 39.815545] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 39.815548] sd 2:0:0:0: [sdb] [ 39.815550] Sense Key : Medium Error [current] [descriptor] [ 39.815555] Descriptor sense data with sense descriptors (in hex): [ 39.815557] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 39.815568] 3d 09 18 00 [ 39.815574] sd 2:0:0:0: [sdb] [ 39.815577] Add. Sense: Unrecovered read error - auto reallocate failed [ 39.815580] sd 2:0:0:0: [sdb] CDB: [ 39.815582] Read(10): 28 00 3d 09 18 00 00 00 08 00 [ 39.815592] end_request: I/O error, dev sdb, sector 1024006144 [ 39.815596] Buffer I/O error on device sdb3, logical block 512 [ 39.815610] ata3: EH complete [ 41.761200] ata3.00: exception Emask 0x0 SAct 0x10000 SErr 0x0 action 0x0 [ 41.761206] ata3.00: irq_stat 0x40000008 [ 41.761211] ata3.00: failed command: READ FPDMA QUEUED [ 41.761218] ata3.00: cmd 60/08:80:00:18:09/00:00:3d:00:00/40 tag 16 ncq 4096 in [ 41.761218] res 41/40:00:00:18:09/00:00:3d:00:00/40 Emask 0x409 (media error) [ 41.761222] ata3.00: status: { DRDY ERR } [ 41.761225] ata3.00: error: { UNC } [ 41.766429] ata3.00: configured for UDMA/133 [ 41.766441] sd 2:0:0:0: [sdb] Unhandled sense code [ 41.766444] sd 2:0:0:0: [sdb] [ 41.766447] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 41.766450] sd 2:0:0:0: [sdb] [ 41.766452] Sense Key : Medium Error [current] [descriptor] [ 41.766456] Descriptor sense data with sense descriptors (in hex): [ 41.766458] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 41.766470] 3d 09 18 00 [ 41.766475] sd 2:0:0:0: [sdb] [ 41.766478] Add. Sense: Unrecovered read error - auto reallocate failed [ 41.766481] sd 2:0:0:0: [sdb] CDB: [ 41.766483] Read(10): 28 00 3d 09 18 00 00 00 08 00 [ 41.766493] end_request: I/O error, dev sdb, sector 1024006144 [ 41.766497] Buffer I/O error on device sdb3, logical block 512 [ 41.766510] ata3: EH complete [ 49.094271] type=1400 audit(1426570700.848:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1793 comm="apparmor_parser" [ 49.094281] type=1400 audit(1426570700.848:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1793 comm="apparmor_parser" [ 49.094743] type=1400 audit(1426570700.848:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1793 comm="apparmor_parser" [ 127.886641] type=1400 audit(1426570779.640:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=2708 comm="apparmor_parser"