[ 0.000000] Linux version 4.15.0-46-generic (buildd@lgw01-amd64-008) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.10)) #49~16.04.1-Ubuntu SMP Tue Feb 12 17:45:24 UTC 2019 (Ubuntu 4.15.0-46.49~16.04.1-generic 4.15.18) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.15.0-46-generic root=UUID=6d69e656-ae15-42ac-a7fd-2813366385f8 ro locale=pt_BR quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000aff8ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000aff90000-0x00000000affa7fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000affa8000-0x00000000affcffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000affd0000-0x00000000afffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: System manufacturer System Product Name/M4A785-M, BIOS 0803 03/18/2010 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0xaff90 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back [ 0.000000] 2 base 0000A0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ (ptrval)] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x2833f000, 0x2833ffff] PGTABLE [ 0.000000] BRK [0x28340000, 0x28340fff] PGTABLE [ 0.000000] BRK [0x28341000, 0x28341fff] PGTABLE [ 0.000000] BRK [0x28342000, 0x28342fff] PGTABLE [ 0.000000] BRK [0x28343000, 0x28343fff] PGTABLE [ 0.000000] BRK [0x28344000, 0x28344fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3180e000-0x34bfefff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FB470 000024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 0x00000000AFF90100 000054 (v01 031810 XSDT1456 20100318 MSFT 00000097) [ 0.000000] ACPI: FACP 0x00000000AFF90290 0000F4 (v03 031810 FACP1456 20100318 MSFT 00000097) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170831/tbfadt-658) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20170831/tbfadt-603) [ 0.000000] ACPI: DSDT 0x00000000AFF90450 00CDAA (v01 A1429 A1429001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS 0x00000000AFFA8000 000040 [ 0.000000] ACPI: FACS 0x00000000AFFA8000 000040 [ 0.000000] ACPI: APIC 0x00000000AFF90390 00007C (v01 031810 APIC1456 20100318 MSFT 00000097) [ 0.000000] ACPI: MCFG 0x00000000AFF90410 00003C (v01 031810 OEMMCFG 20100318 MSFT 00000097) [ 0.000000] ACPI: OEMB 0x00000000AFFA8040 000072 (v01 031810 OEMB1456 20100318 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000AFF9F450 000038 (v01 031810 OEMHPET 20100318 MSFT 00000097) [ 0.000000] ACPI: SSDT 0x00000000AFF9F490 000458 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000aff8ffff] [ 0.000000] NODE_DATA(0) allocated [mem 0xaff65000-0xaff8ffff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000aff8ffff] [ 0.000000] Normal empty [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000aff8ffff] [ 0.000000] Reserved but unavailable: 211 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000aff8ffff] [ 0.000000] On node 0 totalpages: 720685 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11199 pages used for memmap [ 0.000000] DMA32 zone: 716688 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] smpboot: Allowing 6 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff] [ 0.000000] e820: [mem 0xb0000000-0xffefffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x51b with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 709401 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.15.0-46-generic root=UUID=6d69e656-ae15-42ac-a7fd-2813366385f8 ro locale=pt_BR quiet splash vt.handoff=7 [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] AGP: Node 0: aperture [bus addr 0x222000000-0x223ffffff] (32MB) [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 2755128K/2882740K available (12300K kernel code, 2472K rwdata, 4264K rodata, 2408K init, 2416K bss, 127612K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] ftrace: allocating 39204 entries in 154 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=6. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 524544, nr_irqs: 472, preallocated irqs: 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 2812.648 MHz processor [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5625.29 BogoMIPS (lpj=11250592) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.024000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.028081] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.028140] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.028175] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.028478] mce: CPU supports 6 MCE banks [ 0.028485] LVT offset 0 assigned for vector 0xf9 [ 0.028489] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.028490] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.028493] Spectre V2 : Mitigation: Full AMD retpoline [ 0.028493] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.028645] Freeing SMP alternatives memory: 36K [ 0.036000] smpboot: CPU0: AMD Athlon(tm) II X2 240 Processor (family: 0x10, model: 0x6, stepping: 0x2) [ 0.036000] Performance Events: AMD PMU driver. [ 0.036000] ... version: 0 [ 0.036000] ... bit width: 48 [ 0.036000] ... generic registers: 4 [ 0.036000] ... value mask: 0000ffffffffffff [ 0.036000] ... max period: 00007fffffffffff [ 0.036000] ... fixed-purpose events: 0 [ 0.036000] ... event mask: 000000000000000f [ 0.036000] Hierarchical SRCU implementation. [ 0.036000] smp: Bringing up secondary CPUs ... [ 0.036000] x86: Booting SMP configuration: [ 0.036000] .... node #0, CPUs: #1 [ 0.036000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.036000] smp: Brought up 1 node, 2 CPUs [ 0.036000] smpboot: Max logical packages: 3 [ 0.036000] smpboot: Total of 2 processors activated (11250.59 BogoMIPS) [ 0.036095] devtmpfs: initialized [ 0.036103] x86/mm: Memory block size: 128MB [ 0.036444] evm: security.selinux [ 0.036444] evm: security.SMACK64 [ 0.036445] evm: security.SMACK64EXEC [ 0.036445] evm: security.SMACK64TRANSMUTE [ 0.036446] evm: security.SMACK64MMAP [ 0.036446] evm: security.apparmor [ 0.036447] evm: security.ima [ 0.036447] evm: security.capability [ 0.036535] PM: Registering ACPI NVS region [mem 0xaffa8000-0xaffcffff] (163840 bytes) [ 0.036535] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.036535] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.036535] pinctrl core: initialized pinctrl subsystem [ 0.036535] RTC time: 11:58:33, date: 03/31/19 [ 0.036535] NET: Registered protocol family 16 [ 0.036535] audit: initializing netlink subsys (disabled) [ 0.036535] audit: type=2000 audit(1554033512.036:1): state=initialized audit_enabled=0 res=1 [ 0.036535] cpuidle: using governor ladder [ 0.036535] cpuidle: using governor menu [ 0.036535] node 0 link 0: io port [1000, ffffff] [ 0.036535] TOM: 00000000c0000000 aka 3072M [ 0.036535] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 0.036535] node 0 link 0: mmio [a0000, bffff] [ 0.036535] node 0 link 0: mmio [c0000000, cfffffff] [ 0.036535] node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff] [ 0.036535] node 0 link 0: mmio [f0000000, fe8fffff] [ 0.036535] node 0 link 0: mmio [fe900000, feafffff] [ 0.036535] node 0 link 0: mmio [feb00000, ffefffff] [ 0.036535] bus: [bus 00-07] on node 0 link 0 [ 0.036535] bus: 00 [io 0x0000-0xffff] [ 0.036535] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.036535] bus: 00 [mem 0xc0000000-0xdfffffff] [ 0.036535] bus: 00 [mem 0xf0000000-0xfcffffffff] [ 0.036535] ACPI: bus type PCI registered [ 0.036535] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.036535] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.036535] PCI: not using MMCONFIG [ 0.036535] PCI: Using configuration type 1 for base access [ 0.036535] PCI: Using configuration type 1 for extended access [ 0.036535] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.036535] mtrr: probably your BIOS does not setup all CPUs. [ 0.036535] mtrr: corrected configuration. [ 0.037216] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.037216] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.040135] ACPI: Added _OSI(Module Device) [ 0.040136] ACPI: Added _OSI(Processor Device) [ 0.040137] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.040138] ACPI: Added _OSI(Processor Aggregator Device) [ 0.040139] ACPI: Added _OSI(Linux-Dell-Video) [ 0.040140] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.040141] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.040923] ACPI: Executed 3 blocks of module-level executable AML code [ 0.133522] ACPI: Interpreter enabled [ 0.133555] ACPI: (supports S0 S1 S3 S4 S5) [ 0.133556] ACPI: Using IOAPIC for interrupt routing [ 0.133602] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.135723] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.135746] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.136433] ACPI: Enabled 8 GPEs in block 00 to 1F [ 0.146700] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.146706] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.146712] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.147101] PCI host bridge to bus 0000:00 [ 0.147103] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.147105] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.147106] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.147107] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.147109] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xdfffffff window] [ 0.147110] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.147111] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.147121] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000 [ 0.147243] pci 0000:00:01.0: [1043:9602] type 01 class 0x060400 [ 0.147355] pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400 [ 0.147370] pci 0000:00:0a.0: enabling Extended Tags [ 0.147393] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.147494] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.147515] pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007] [ 0.147523] pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003] [ 0.147532] pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007] [ 0.147540] pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003] [ 0.147549] pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f] [ 0.147557] pci 0000:00:11.0: reg 0x24: [mem 0xfe8ffc00-0xfe8fffff] [ 0.147578] pci 0000:00:11.0: set SATA to AHCI mode [ 0.147687] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.147704] pci 0000:00:12.0: reg 0x10: [mem 0xfe8fe000-0xfe8fefff] [ 0.147842] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.147858] pci 0000:00:12.1: reg 0x10: [mem 0xfe8fd000-0xfe8fdfff] [ 0.148003] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.148023] pci 0000:00:12.2: reg 0x10: [mem 0xfe8ff800-0xfe8ff8ff] [ 0.148099] pci 0000:00:12.2: supports D1 D2 [ 0.148100] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.148194] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.148211] pci 0000:00:13.0: reg 0x10: [mem 0xfe8fc000-0xfe8fcfff] [ 0.148350] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.148366] pci 0000:00:13.1: reg 0x10: [mem 0xfe8fb000-0xfe8fbfff] [ 0.148508] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.148527] pci 0000:00:13.2: reg 0x10: [mem 0xfe8ff400-0xfe8ff4ff] [ 0.148603] pci 0000:00:13.2: supports D1 D2 [ 0.148604] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.148706] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.148873] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.148891] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007] [ 0.148900] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003] [ 0.148908] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007] [ 0.148916] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003] [ 0.148924] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f] [ 0.148943] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.148944] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.148945] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.148947] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.149054] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.149078] pci 0000:00:14.2: reg 0x10: [mem 0xfe8f4000-0xfe8f7fff 64bit] [ 0.149141] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.149229] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.149383] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.149506] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.149523] pci 0000:00:14.5: reg 0x10: [mem 0xfe8fa000-0xfe8fafff] [ 0.149664] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.149747] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.149830] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.149910] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.149992] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.150111] pci 0000:01:05.0: [1002:9710] type 00 class 0x030000 [ 0.150118] pci 0000:01:05.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref] [ 0.150122] pci 0000:01:05.0: reg 0x14: [io 0xd000-0xd0ff] [ 0.150125] pci 0000:01:05.0: reg 0x18: [mem 0xfeaf0000-0xfeafffff] [ 0.150133] pci 0000:01:05.0: reg 0x24: [mem 0xfe900000-0xfe9fffff] [ 0.150150] pci 0000:01:05.0: supports D1 D2 [ 0.150177] pci 0000:01:05.1: [1002:970f] type 00 class 0x040300 [ 0.150184] pci 0000:01:05.1: reg 0x10: [mem 0xfeae8000-0xfeaebfff] [ 0.150211] pci 0000:01:05.1: supports D1 D2 [ 0.150265] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.150267] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.150269] pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfeafffff] [ 0.150272] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.150309] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.150329] pci 0000:02:00.0: reg 0x10: [io 0xe800-0xe8ff] [ 0.150348] pci 0000:02:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref] [ 0.150360] pci 0000:02:00.0: reg 0x20: [mem 0xfdff8000-0xfdffbfff 64bit pref] [ 0.150368] pci 0000:02:00.0: reg 0x30: [mem 0xfebf0000-0xfebfffff pref] [ 0.150427] pci 0000:02:00.0: supports D1 D2 [ 0.150428] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.160043] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.160048] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.160050] pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.160053] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.160161] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.160169] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.160171] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.160172] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.160173] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.160175] pci 0000:00:14.4: bridge window [mem 0xb0000000-0xdfffffff window] (subtractive decode) [ 0.160176] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.161437] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15) [ 0.161505] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15) [ 0.161571] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15) [ 0.161636] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15) [ 0.161701] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.161767] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.161832] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15) [ 0.161898] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.162266] SCSI subsystem initialized [ 0.162332] libata version 3.00 loaded. [ 0.162332] pci 0000:01:05.0: vgaarb: setting as boot VGA device [ 0.162332] pci 0000:01:05.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.162332] pci 0000:01:05.0: vgaarb: bridge control possible [ 0.162332] vgaarb: loaded [ 0.162332] ACPI: bus type USB registered [ 0.162332] usbcore: registered new interface driver usbfs [ 0.162332] usbcore: registered new interface driver hub [ 0.162332] usbcore: registered new device driver usb [ 0.162332] EDAC MC: Ver: 3.0.0 [ 0.162332] PCI: Using ACPI for IRQ routing [ 0.171046] PCI: pci_cache_line_size set to 64 bytes [ 0.171097] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff] [ 0.171098] e820: reserve RAM buffer [mem 0xaff90000-0xafffffff] [ 0.171207] NetLabel: Initializing [ 0.171207] NetLabel: domain hash size = 128 [ 0.171208] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.171225] NetLabel: unlabeled traffic allowed by default [ 0.171243] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.171243] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.173052] clocksource: Switched to clocksource hpet [ 0.187244] VFS: Disk quotas dquot_6.6.0 [ 0.187273] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.187422] AppArmor: AppArmor Filesystem Enabled [ 0.187467] pnp: PnP ACPI init [ 0.187768] system 00:00: [mem 0xb0000000-0xbfffffff] has been reserved [ 0.187774] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.187845] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.188696] pnp 00:02: [dma 0 disabled] [ 0.188966] pnp 00:02: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.189073] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.189637] pnp 00:04: [dma 0 disabled] [ 0.189711] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.189857] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.189858] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.189862] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.190134] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.190136] system 00:06: [io 0x040b] has been reserved [ 0.190137] system 00:06: [io 0x04d6] has been reserved [ 0.190139] system 00:06: [io 0x0c00-0x0c01] has been reserved [ 0.190140] system 00:06: [io 0x0c14] has been reserved [ 0.190141] system 00:06: [io 0x0c50-0x0c51] has been reserved [ 0.190142] system 00:06: [io 0x0c52] has been reserved [ 0.190143] system 00:06: [io 0x0c6c] has been reserved [ 0.190145] system 00:06: [io 0x0c6f] has been reserved [ 0.190146] system 00:06: [io 0x0cd0-0x0cd1] has been reserved [ 0.190147] system 00:06: [io 0x0cd2-0x0cd3] has been reserved [ 0.190148] system 00:06: [io 0x0cd4-0x0cd5] has been reserved [ 0.190150] system 00:06: [io 0x0cd6-0x0cd7] has been reserved [ 0.190151] system 00:06: [io 0x0cd8-0x0cdf] has been reserved [ 0.190152] system 00:06: [io 0x0b00-0x0b3f] has been reserved [ 0.190153] system 00:06: [io 0x0800-0x089f] has been reserved [ 0.190155] system 00:06: [io 0x0b00-0x0b0f] has been reserved [ 0.190156] system 00:06: [io 0x0b20-0x0b3f] has been reserved [ 0.190157] system 00:06: [io 0x0900-0x090f] has been reserved [ 0.190159] system 00:06: [io 0x0910-0x091f] has been reserved [ 0.190160] system 00:06: [io 0xfe00-0xfefe] has been reserved [ 0.190162] system 00:06: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.190163] system 00:06: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.190167] system 00:06: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.190170] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.190419] system 00:07: [io 0x0230-0x023f] has been reserved [ 0.190421] system 00:07: [io 0x0290-0x029f] has been reserved [ 0.190422] system 00:07: [io 0x0300-0x030f] has been reserved [ 0.190423] system 00:07: [io 0x0a30-0x0a3f] has been reserved [ 0.190426] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.190500] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.190504] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.190910] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.190912] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.190913] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.190915] system 00:09: [mem 0x00100000-0xafffffff] could not be reserved [ 0.190916] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.190920] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.191064] pnp: PnP ACPI: found 10 devices [ 0.197769] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.197793] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.197795] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.197798] pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfeafffff] [ 0.197800] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.197803] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.197804] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.197806] pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.197808] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.197811] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.197823] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.197824] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.197825] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.197827] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.197828] pci_bus 0000:00: resource 8 [mem 0xb0000000-0xdfffffff window] [ 0.197829] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window] [ 0.197830] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.197831] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfeafffff] [ 0.197833] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.197834] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.197835] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.197836] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.197838] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.197839] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.197840] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.197841] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.197843] pci_bus 0000:03: resource 8 [mem 0xb0000000-0xdfffffff window] [ 0.197844] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff window] [ 0.197940] NET: Registered protocol family 2 [ 0.198274] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.198413] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.198634] TCP: Hash tables configured (established 32768 bind 32768) [ 0.198730] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.198768] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.198882] NET: Registered protocol family 1 [ 0.198896] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 0.672252] pci 0000:01:05.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.672259] PCI: CLS 64 bytes, default 64 [ 0.672318] Unpacking initramfs... [ 1.502279] Freeing initrd memory: 53188K [ 1.502650] LVT offset 1 assigned for vector 0x400 [ 1.502655] IBS: LVT offset 1 assigned [ 1.502737] perf: AMD IBS detected (0x0000001f) [ 1.502842] Scanning for low memory corruption every 60 seconds [ 1.503592] Initialise system trusted keyrings [ 1.503601] Key type blacklist registered [ 1.503849] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 1.505122] zbud: loaded [ 1.505563] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.505954] fuse init (API version 7.26) [ 1.508214] Key type asymmetric registered [ 1.508216] Asymmetric key parser 'x509' registered [ 1.508296] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.508410] io scheduler noop registered [ 1.508412] io scheduler deadline registered [ 1.508470] io scheduler cfq registered (default) [ 1.509154] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 1.509156] vesafb: scrolling: redraw [ 1.509158] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 1.509176] vesafb: framebuffer at 0xd0000000, mapped to 0x (ptrval), using 3072k, total 3072k [ 1.509323] Console: switching to colour frame buffer device 128x48 [ 1.509340] fb0: VESA VGA frame buffer device [ 1.509432] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.509442] ACPI: Power Button [PWRB] [ 1.509482] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.509536] ACPI: Power Button [PWRF] [ 1.510299] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.530891] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.535033] Linux agpgart interface v0.103 [ 1.537778] loop: module loaded [ 1.538036] libphy: Fixed MDIO Bus: probed [ 1.538038] tun: Universal TUN/TAP device driver, 1.6 [ 1.538218] PPP generic driver version 2.4.2 [ 1.538352] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.538360] ehci-pci: EHCI PCI platform driver [ 1.538584] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.538592] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.538596] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.538606] ehci-pci 0000:00:12.2: debug port 1 [ 1.538648] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe8ff800 [ 1.552103] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.552191] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.552193] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.552194] usb usb1: Product: EHCI Host Controller [ 1.552195] usb usb1: Manufacturer: Linux 4.15.0-46-generic ehci_hcd [ 1.552196] usb usb1: SerialNumber: 0000:00:12.2 [ 1.552446] hub 1-0:1.0: USB hub found [ 1.552453] hub 1-0:1.0: 6 ports detected [ 1.552881] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.552887] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.552891] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.552900] ehci-pci 0000:00:13.2: debug port 1 [ 1.552939] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe8ff400 [ 1.568075] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.568140] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.568141] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.568142] usb usb2: Product: EHCI Host Controller [ 1.568143] usb usb2: Manufacturer: Linux 4.15.0-46-generic ehci_hcd [ 1.568144] usb usb2: SerialNumber: 0000:00:13.2 [ 1.568401] hub 2-0:1.0: USB hub found [ 1.568407] hub 2-0:1.0: 6 ports detected [ 1.568615] ehci-platform: EHCI generic platform driver [ 1.568654] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.568664] ohci-pci: OHCI PCI platform driver [ 1.568944] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.568953] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.568995] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe8fe000 [ 1.632119] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.632122] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.632123] usb usb3: Product: OHCI PCI host controller [ 1.632124] usb usb3: Manufacturer: Linux 4.15.0-46-generic ohci_hcd [ 1.632125] usb usb3: SerialNumber: 0000:00:12.0 [ 1.632370] hub 3-0:1.0: USB hub found [ 1.632379] hub 3-0:1.0: 3 ports detected [ 1.632729] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.632735] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.632764] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe8fd000 [ 1.696119] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.696121] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.696123] usb usb4: Product: OHCI PCI host controller [ 1.696124] usb usb4: Manufacturer: Linux 4.15.0-46-generic ohci_hcd [ 1.696125] usb usb4: SerialNumber: 0000:00:12.1 [ 1.696376] hub 4-0:1.0: USB hub found [ 1.696386] hub 4-0:1.0: 3 ports detected [ 1.696744] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.696753] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.696803] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe8fc000 [ 1.760117] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.760119] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.760121] usb usb5: Product: OHCI PCI host controller [ 1.760122] usb usb5: Manufacturer: Linux 4.15.0-46-generic ohci_hcd [ 1.760123] usb usb5: SerialNumber: 0000:00:13.0 [ 1.760354] hub 5-0:1.0: USB hub found [ 1.760365] hub 5-0:1.0: 3 ports detected [ 1.760724] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.760733] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.760766] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe8fb000 [ 1.824106] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.824108] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.824110] usb usb6: Product: OHCI PCI host controller [ 1.824111] usb usb6: Manufacturer: Linux 4.15.0-46-generic ohci_hcd [ 1.824112] usb usb6: SerialNumber: 0000:00:13.1 [ 1.824371] hub 6-0:1.0: USB hub found [ 1.824380] hub 6-0:1.0: 3 ports detected [ 1.824745] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.824754] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.824785] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe8fa000 [ 1.888059] usb 1-2: new high-speed USB device number 2 using ehci-pci [ 1.888129] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.888132] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.888133] usb usb7: Product: OHCI PCI host controller [ 1.888134] usb usb7: Manufacturer: Linux 4.15.0-46-generic ohci_hcd [ 1.888135] usb usb7: SerialNumber: 0000:00:14.5 [ 1.888392] hub 7-0:1.0: USB hub found [ 1.888401] hub 7-0:1.0: 2 ports detected [ 1.888554] ohci-platform: OHCI generic platform driver [ 1.888587] uhci_hcd: USB Universal Host Controller Interface driver [ 1.888679] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.888679] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.888840] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.888987] mousedev: PS/2 mouse device common for all mice [ 1.889144] rtc_cmos 00:01: RTC can wake from S4 [ 1.889356] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.889390] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.889404] i2c /dev entries driver [ 1.889412] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0 [ 1.889515] device-mapper: uevent: version 1.0.3 [ 1.889629] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 1.889666] ledtrig-cpu: registered to indicate activity on CPUs [ 1.890162] NET: Registered protocol family 10 [ 1.894519] Segment Routing with IPv6 [ 1.894554] NET: Registered protocol family 17 [ 1.894647] Key type dns_resolver registered [ 1.895091] RAS: Correctable Errors collector initialized. [ 1.895125] microcode: microcode updated early to new patch_level=0x010000c7 [ 1.895167] microcode: CPU0: patch_level=0x010000c7 [ 1.895187] microcode: CPU1: patch_level=0x010000c7 [ 1.895279] microcode: Microcode Update Driver: v2.2. [ 1.895293] sched_clock: Marking stable (1895264129, 0)->(1983801303, -88537174) [ 1.895540] registered taskstats version 1 [ 1.895551] Loading compiled-in X.509 certificates [ 1.898721] Loaded X.509 cert 'Build time autogenerated kernel key: 2afc10a0aded6eb10fbb305169a9135fbe739d7d' [ 1.898764] zswap: loaded using pool lzo/zbud [ 1.902673] Key type big_key registered [ 1.902679] Key type trusted registered [ 1.904457] Key type encrypted registered [ 1.904466] AppArmor: AppArmor sha1 policy hashing enabled [ 1.904469] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.904476] ima: Allocated hash algorithm: sha1 [ 1.904505] evm: HMAC attrs: 0x1 [ 1.904847] Magic number: 11:918:985 [ 1.905030] rtc_cmos 00:01: setting system clock to 2019-03-31 11:58:34 UTC (1554033514) [ 1.905247] acpi_cpufreq: overriding BIOS provided _PSD data [ 1.905629] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.905629] EDD information not available. [ 1.909342] Freeing unused kernel memory: 2408K [ 1.911592] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.932090] Write protecting the kernel read-only data: 20480k [ 1.933129] Freeing unused kernel memory: 2008K [ 1.938765] Freeing unused kernel memory: 1880K [ 1.947472] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.966082] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.966168] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.966179] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.038463] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.038478] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.038900] r8169 0000:02:00.0 eth0: RTL8168d/8111d at 0x (ptrval), 48:5b:39:50:f6:e6, XID 083000c0 IRQ 24 [ 2.038902] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.041056] ahci 0000:00:11.0: version 3.0 [ 2.041318] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 2.041320] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 2.045892] usb 1-2: New USB device found, idVendor=0781, idProduct=5567 [ 2.045894] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.045895] usb 1-2: Product: Cruzer Blade [ 2.045896] usb 1-2: Manufacturer: SanDisk [ 2.045897] usb 1-2: SerialNumber: 4C530599940102122223 [ 2.048064] scsi host0: ahci [ 2.067563] scsi host1: ahci [ 2.074138] [drm] radeon kernel modesetting enabled. [ 2.074237] checking generic (d0000000 300000) vs hw (d0000000 10000000) [ 2.074238] fb: switching to radeondrmfb from VESA VGA [ 2.074273] Console: switching to colour dummy device 80x25 [ 2.074883] [drm] initializing kernel modesetting (RS880 0x1002:0x9710 0x1043:0x83A2 0x00). [ 2.074914] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window] [ 2.074919] caller pci_map_rom+0x5d/0xf0 mapping multiple BARs [ 2.075500] ATOM BIOS: 113 [ 2.075522] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used) [ 2.075524] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF [ 2.075529] [drm] Detected VRAM RAM=256M, BAR=256M [ 2.075530] [drm] RAM width 32bits DDR [ 2.075598] [TTM] Zone kernel: Available graphics memory: 1407324 kiB [ 2.075598] [TTM] Initializing pool allocator [ 2.075602] [TTM] Initializing DMA pool allocator [ 2.075624] [drm] radeon: 256M of VRAM memory ready [ 2.075626] [drm] radeon: 512M of GTT memory ready. [ 2.075633] [drm] Loading RS780 Microcode [ 2.075702] [drm] radeon: power management initialized [ 2.075800] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 2.091836] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 2.092708] scsi host2: ahci [ 2.095666] [drm] PCIE GART of 512M enabled (table at 0x00000000C0146000). [ 2.096077] radeon 0000:01:05.0: WB enabled [ 2.096081] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0x (ptrval) [ 2.098239] radeon 0000:01:05.0: fence driver on ring 5 use gpu addr 0x00000000c0056038 and cpu addr 0x (ptrval) [ 2.098241] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.098241] [drm] Driver supports precise vblank timestamp query. [ 2.098242] radeon 0000:01:05.0: radeon: MSI limited to 32-bit [ 2.098256] [drm] radeon: irq initialized. [ 2.130191] scsi host3: ahci [ 2.130280] ata1: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd00 irq 22 [ 2.130283] ata2: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd80 irq 22 [ 2.130285] ata3: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe00 irq 22 [ 2.130287] ata4: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe80 irq 22 [ 2.130546] [drm] ring test on 0 succeeded in 1 usecs [ 2.172044] usb 1-4: new high-speed USB device number 3 using ehci-pci [ 2.442773] ata1: SATA link down (SStatus 0 SControl 300) [ 2.446851] ata3: SATA link down (SStatus 0 SControl 300) [ 2.446890] ata2: SATA link down (SStatus 0 SControl 300) [ 2.446925] ata4: SATA link down (SStatus 0 SControl 300) [ 2.524279] usb 1-4: New USB device found, idVendor=03f0, idProduct=e207 [ 2.524281] usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=0 [ 2.524283] usb 1-4: Product: HP Webcam HD 2300 [ 2.524284] usb 1-4: Manufacturer: Hewlett Packard [ 3.297359] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 3.436021] usb-storage 1-2:1.0: USB Mass Storage device detected [ 3.439814] hidraw: raw HID events driver (C) Jiri Kosina [ 3.442657] scsi host4: usb-storage 1-2:1.0 [ 3.442753] usbcore: registered new interface driver usb-storage [ 3.444253] usbcore: registered new interface driver uas [ 3.444455] usbcore: registered new interface driver usbhid [ 3.444456] usbhid: USB HID core driver [ 3.446708] hid-generic 0003:03F0:E207.0001: hiddev0,hidraw0: USB HID v1.11 Device [Hewlett Packard HP Webcam HD 2300] on usb-0000:00:12.2-4/input4 [ 4.309354] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 4.444608] scsi 4:0:0:0: Direct-Access SanDisk Cruzer Blade 1.27 PQ: 0 ANSI: 6 [ 4.444930] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 4.447101] sd 4:0:0:0: [sda] 62530624 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 4.448597] sd 4:0:0:0: [sda] Write Protect is off [ 4.448600] sd 4:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 4.449596] sd 4:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.454107] sda: sda1 [ 4.463354] sd 4:0:0:0: [sda] Attached SCSI disk [ 4.488656] random: fast init done [ 5.321340] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 6.333315] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 7.345292] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8.357276] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 9.369257] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 10.381232] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 11.393213] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 12.405202] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 12.425070] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, giving up!!! [ 12.425074] radeon 0000:01:05.0: failed initializing UVD (-1). [ 12.425209] [drm] ib test on ring 0 succeeded in 0 usecs [ 12.426678] tsc: Refined TSC clocksource calibration: 2812.531 MHz [ 12.426683] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x288a7e1f5a4, max_idle_ns: 440795257478 ns [ 12.427021] [drm] Radeon Display Connectors [ 12.427021] [drm] Connector 0: [ 12.427022] [drm] VGA-1 [ 12.427023] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 12.427024] [drm] Encoders: [ 12.427025] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 12.427025] [drm] Connector 1: [ 12.427026] [drm] DVI-D-1 [ 12.427026] [drm] HPD1 [ 12.427027] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 12.427027] [drm] Encoders: [ 12.427028] [drm] DFP3: INTERNAL_KLDSCP_LVTMA [ 12.430331] scsi host5: pata_atiixp [ 12.456764] scsi host6: pata_atiixp [ 12.456806] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 12.456807] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 12.468749] [drm] fb mappable at 0xD0247000 [ 12.468750] [drm] vram apper at 0xD0000000 [ 12.468751] [drm] size 4325376 [ 12.468751] [drm] fb depth is 24 [ 12.468752] [drm] pitch is 5632 [ 12.468860] fbcon: radeondrmfb (fb0) is primary device [ 12.468941] Console: switching to colour frame buffer device 170x48 [ 12.468962] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device [ 12.479663] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:05.0 on minor 0 [ 12.619014] ata5.00: HPA detected: current 80291135, native 80293248 [ 12.619019] ata5.00: ATA-7: Maxtor 2F040L0, VAM51JJ0, max UDMA/133 [ 12.619020] ata5.00: 80291135 sectors, multi 16: LBA48 [ 12.621660] ata6.00: HPA detected: current 781420655, native 781422768 [ 12.621667] ata6.00: ATA-7: ST3400832AS, 3.07, max UDMA/133 [ 12.621668] ata6.00: 781420655 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 12.621676] ata6.01: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN00, max UDMA/100 [ 12.624672] ata6.00: configured for UDMA/100 [ 12.624750] ata5.00: configured for UDMA/100 [ 12.625078] scsi 5:0:0:0: Direct-Access ATA Maxtor 2F040L0 1JJ0 PQ: 0 ANSI: 5 [ 12.625667] sd 5:0:0:0: [sdb] 80291135 512-byte logical blocks: (41.1 GB/38.3 GiB) [ 12.625680] sd 5:0:0:0: [sdb] Write Protect is off [ 12.625682] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 12.625699] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 12.626042] sd 5:0:0:0: Attached scsi generic sg1 type 0 [ 12.631747] sdb: sdb1 sdb2 [ 12.632088] sd 5:0:0:0: [sdb] Attached SCSI disk [ 12.648051] ata6.01: configured for UDMA/100 [ 12.650351] scsi 6:0:0:0: Direct-Access ATA ST3400832AS 3.07 PQ: 0 ANSI: 5 [ 12.650919] sd 6:0:0:0: [sdc] 781420655 512-byte logical blocks: (400 GB/373 GiB) [ 12.650933] sd 6:0:0:0: [sdc] Write Protect is off [ 12.650935] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 12.650952] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 12.651303] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 12.675432] scsi 6:0:1:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN00 PQ: 0 ANSI: 5 [ 12.709077] sr 6:0:1:0: [sr0] scsi3-mmc drive: 10x/10x writer dvd-ram cd/rw xa/form2 cdda tray [ 12.709082] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 12.709296] sr 6:0:1:0: Attached scsi CD-ROM sr0 [ 12.709368] sr 6:0:1:0: Attached scsi generic sg3 type 5 [ 12.751184] sdc: sdc1 sdc2 < sdc5 sdc6 > [ 12.751756] sd 6:0:0:0: [sdc] Attached SCSI disk [ 12.767638] usb 4-3: new low-speed USB device number 2 using ohci-pci [ 12.965671] usb 4-3: New USB device found, idVendor=1c4f, idProduct=0003 [ 12.965674] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 12.965675] usb 4-3: Product: U+P Mouse [ 12.965676] usb 4-3: Manufacturer: SIGMACH1P [ 12.972990] input: SIGMACH1P U+P Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/0003:1C4F:0003.0002/input/input3 [ 12.973120] hid-generic 0003:1C4F:0003.0002: input,hidraw1: USB HID v1.10 Mouse [SIGMACH1P U+P Mouse] on usb-0000:00:12.1-3/input0 [ 13.435754] clocksource: Switched to clocksource tsc [ 18.339518] random: crng init done [ 18.339522] random: 7 urandom warning(s) missed due to ratelimiting [ 22.103429] EXT4-fs (sdc5): mounted filesystem with ordered data mode. Opts: (null) [ 22.956750] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 22.956870] systemd[1]: Detected architecture x86-64. [ 22.963935] systemd[1]: Set hostname to . [ 23.955250] systemd[1]: Listening on udev Control Socket. [ 23.955332] systemd[1]: Reached target User and Group Name Lookups. [ 23.955363] systemd[1]: Listening on Syslog Socket. [ 23.955518] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 23.955559] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 23.955627] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 23.955672] systemd[1]: Started Trigger resolvconf update for networkd DNS. [ 24.456271] EXT4-fs (sdc5): re-mounted. Opts: errors=remount-ro [ 30.129511] systemd-journald[248]: Received request to flush runtime journal from PID 1 [ 30.612609] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20170831/utaddress-247) [ 30.612616] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\SMRG) (20170831/utaddress-247) [ 30.612621] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\_SB.PCI0.SBRG.ASOC.SMRG) (20170831/utaddress-247) [ 30.612625] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 30.810305] parport_pc 00:02: reported by Plug and Play ACPI [ 30.810384] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 30.817146] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 30.870856] ATK0110 ATK0110:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 31.591323] media: Linux media interface: v0.10 [ 31.621952] Linux video capture interface: v2.00 [ 31.776648] uvcvideo: Found UVC 1.00 device HP Webcam HD 2300 (03f0:e207) [ 31.788700] uvcvideo 1-4:1.0: Entity type for entity Extension 4 was not initialized! [ 31.788703] uvcvideo 1-4:1.0: Entity type for entity Processing 2 was not initialized! [ 31.788705] uvcvideo 1-4:1.0: Entity type for entity Camera 1 was not initialized! [ 31.789309] input: HP Webcam HD 2300: HP Webcam HD as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0/input/input4 [ 31.789391] usbcore: registered new interface driver uvcvideo [ 31.789392] USB Video Class driver (1.1.1) [ 31.927610] ppdev: user-space parallel port driver [ 32.120240] kvm: disabled by bios [ 32.242916] usbcore: registered new interface driver snd-usb-audio [ 32.250028] MCE: In-kernel MCE decoding enabled. [ 32.252776] EDAC amd64: Node 0: DRAM ECC disabled. [ 32.252778] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 32.288088] EDAC amd64: Node 0: DRAM ECC disabled. [ 32.288091] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 32.471195] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card2/input5 [ 33.691658] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708S: line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line [ 33.691661] snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 33.691662] snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0) [ 33.691663] snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0 [ 33.691665] snd_hda_codec_via hdaudioC0D0: dig-out=0x20/0x21 [ 33.691666] snd_hda_codec_via hdaudioC0D0: inputs: [ 33.691667] snd_hda_codec_via hdaudioC0D0: Rear Mic=0x1a [ 33.691669] snd_hda_codec_via hdaudioC0D0: Front Mic=0x1e [ 33.691670] snd_hda_codec_via hdaudioC0D0: Line=0x1b [ 33.700535] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 33.700663] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 33.700729] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 33.700781] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 33.700834] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 33.700883] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 33.700935] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 [ 33.700982] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input13 [ 45.470875] EXT4-fs (sdc6): mounted filesystem with ordered data mode. Opts: (null) [ 46.007507] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ 46.183523] audit: type=1400 audit(1554033558.771:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=563 comm="apparmor_parser" [ 46.183532] audit: type=1400 audit(1554033558.771:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=563 comm="apparmor_parser" [ 46.183536] audit: type=1400 audit(1554033558.771:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=563 comm="apparmor_parser" [ 46.183539] audit: type=1400 audit(1554033558.771:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=563 comm="apparmor_parser" [ 46.184515] audit: type=1400 audit(1554033558.775:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=562 comm="apparmor_parser" [ 46.184519] audit: type=1400 audit(1554033558.775:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=562 comm="apparmor_parser" [ 46.187664] audit: type=1400 audit(1554033558.775:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=569 comm="apparmor_parser" [ 46.191077] audit: type=1400 audit(1554033558.779:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=572 comm="apparmor_parser" [ 46.203300] audit: type=1400 audit(1554033558.791:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=567 comm="apparmor_parser" [ 46.203306] audit: type=1400 audit(1554033558.791:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=567 comm="apparmor_parser" [ 49.567269] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 49.819716] r8169 0000:02:00.0 enp2s0: link down [ 49.819726] r8169 0000:02:00.0 enp2s0: link down [ 49.819782] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 51.710335] r8169 0000:02:00.0 enp2s0: link up [ 51.710346] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready [ 632.342579] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 5152.036995] perf: interrupt took too long (2529 > 2500), lowering kernel.perf_event_max_sample_rate to 79000 [21703.073002] IPv6: ipv6_create_tempaddr: retry temporary address regeneration [22102.851185] perf: interrupt took too long (3192 > 3161), lowering kernel.perf_event_max_sample_rate to 62500