[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-17-generic (buildd@crested) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu May 1 13:57:17 UTC 2008 (Ubuntu 2.6.24-17.31-generic) [ 0.000000] Command line: root=UUID=51a60305-fc04-4640-aee5-7300fce81fdc ro verbose nosplash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) [ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524000) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F82B0 checksum 0 [ 0.000000] ACPI: RSDP 000F82B0, 0024 (r2 ATI ) [ 0.000000] ACPI: XSDT 7FEE3100, 004C (r1 ATI ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 7FEE8500, 00F4 (r3 ATI ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 7FEE3280, 5213 (r1 ATI ASUSACPI 1000 MSFT 3000000) [ 0.000000] ACPI: FACS 7FEE0000, 0040 [ 0.000000] ACPI: SSDT 7FEE8740, 0206 (r1 PTLTD POWERNOW 1 LTP 1) [ 0.000000] ACPI: HPET 7FEE89C0, 0038 (r1 ATI ASUSACPI 42302E31 AWRD 98) [ 0.000000] ACPI: MCFG 7FEE8A40, 003C (r1 ATI ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC 7FEE8640, 0084 (r1 ATI ASUSACPI 42302E31 AWRD 0) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] CPU has 2 num_cores [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007fee0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524000) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000007fee0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 524000 [ 0.000000] On node 0 totalpages: 523903 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1220 pages reserved [ 0.000000] DMA zone: 2723 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7108 pages used for memmap [ 0.000000] DMA32 zone: 512796 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8200 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000) [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515519 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=51a60305-fc04-4640-aee5-7300fce81fdc ro verbose nosplash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC calibrated against PM_TIMER [ 21.192877] Marking TSC unstable due to TSCs unsynchronized [ 21.192879] time.c: Detected 2099.904 MHz processor. [ 21.194520] Console: colour VGA+ 80x25 [ 21.194523] console [tty0] enabled [ 21.198250] Checking aperture... [ 21.198301] CPU 0: aperture @ 452000000 size 32 MB [ 21.198353] Aperture too small (32 MB) [ 21.207381] No AGP bridge found [ 21.223308] Memory: 2054292k/2096000k available (2488k kernel code, 41320k reserved, 1319k data, 320k init) [ 21.223405] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 [ 21.302728] Calibrating delay using timer specific routine.. 4203.26 BogoMIPS (lpj=8406527) [ 21.302858] Security Framework initialized [ 21.302913] SELinux: Disabled at boot. [ 21.302976] AppArmor: AppArmor initialized [ 21.303029] Failure registering capabilities with primary security module. [ 21.303237] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 21.304336] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 21.304873] Mount-cache hash table entries: 256 [ 21.305041] Initializing cgroup subsys ns [ 21.305095] Initializing cgroup subsys cpuacct [ 21.305157] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 21.305211] CPU: L2 Cache: 512K (64 bytes/line) [ 21.305264] CPU 0/0 -> Node 0 [ 21.305315] CPU: Physical Processor ID: 0 [ 21.305366] CPU: Processor Core ID: 0 [ 21.305437] SMP alternatives: switching to UP code [ 21.306036] Early unpacking initramfs... done [ 21.596531] ACPI: Core revision 20070126 [ 21.596629] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 21.653970] Using local APIC timer interrupts. [ 21.701589] APIC timer calibration result 12499421 [ 21.701591] Detected 12.499 MHz APIC timer. [ 21.701731] SMP alternatives: switching to SMP code [ 21.702187] Booting processor 1/2 APIC 0x1 [ 21.712693] Initializing CPU#1 [ 21.789919] Calibrating delay using timer specific routine.. 4199.82 BogoMIPS (lpj=8399641) [ 21.789925] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 21.789927] CPU: L2 Cache: 512K (64 bytes/line) [ 21.789929] CPU 1/1 -> Node 0 [ 21.789930] CPU: Physical Processor ID: 0 [ 21.789931] CPU: Processor Core ID: 1 [ 21.790025] AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ stepping 01 [ 21.789729] Brought up 2 CPUs [ 21.790326] CPU0 attaching sched-domain: [ 21.790329] domain 0: span 03 [ 21.790330] groups: 01 02 [ 21.790333] domain 1: span 03 [ 21.790334] groups: 03 [ 21.790336] CPU1 attaching sched-domain: [ 21.790338] domain 0: span 03 [ 21.790339] groups: 02 01 [ 21.790342] domain 1: span 03 [ 21.790343] groups: 03 [ 21.790553] net_namespace: 120 bytes [ 21.790982] Time: 3:03:50 Date: 05/29/08 [ 21.791065] NET: Registered protocol family 16 [ 21.791300] ACPI: bus type pci registered [ 21.791420] PCI: Using configuration type 1 [ 21.792667] ACPI: EC: Look up EC in DSDT [ 21.797156] ACPI: Interpreter enabled [ 21.797212] ACPI: (supports S0 S1 S3 S4 S5) [ 21.797482] ACPI: Using IOAPIC for interrupt routing [ 21.802034] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 21.804062] PCI: Transparent bridge - 0000:00:14.4 [ 21.804139] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 21.804371] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 21.804501] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 21.804581] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] [ 21.827827] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 21.828438] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 21.829046] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 21.829663] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 21.830270] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 21.830877] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11) [ 21.831392] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11) [ 21.831908] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 21.832534] Linux Plug and Play Support v0.97 (c) Adam Belay [ 21.832615] pnp: PnP ACPI init [ 21.832674] ACPI: bus type pnp registered [ 21.835166] pnpacpi: exceeded the max number of mem resources: 12 [ 21.835269] pnp: PnP ACPI: found 12 devices [ 21.835323] ACPI: ACPI bus type pnp unregistered [ 21.835600] PCI: Using ACPI for IRQ routing [ 21.835654] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 21.845507] NET: Registered protocol family 8 [ 21.845561] NET: Registered protocol family 20 [ 21.845728] AppArmor: AppArmor Filesystem Enabled [ 21.857484] system 00:01: ioport range 0x4100-0x411f has been reserved [ 21.857541] system 00:01: ioport range 0x228-0x22f has been reserved [ 21.857598] system 00:01: ioport range 0x40b-0x40b has been reserved [ 21.857654] system 00:01: ioport range 0x4d6-0x4d6 has been reserved [ 21.857710] system 00:01: ioport range 0xc00-0xc01 has been reserved [ 21.857766] system 00:01: ioport range 0xc14-0xc14 has been reserved [ 21.857823] system 00:01: ioport range 0xc50-0xc52 has been reserved [ 21.857879] system 00:01: ioport range 0xc6c-0xc6d has been reserved [ 21.857936] system 00:01: ioport range 0xc6f-0xc6f has been reserved [ 21.857992] system 00:01: ioport range 0xcd0-0xcd1 has been reserved [ 21.858048] system 00:01: ioport range 0xcd2-0xcd3 has been reserved [ 21.858105] system 00:01: ioport range 0xcd4-0xcdf has been reserved [ 21.858162] system 00:01: ioport range 0x4000-0x40fe has been reserved [ 21.858218] system 00:01: ioport range 0x4210-0x4217 has been reserved [ 21.858275] system 00:01: ioport range 0xb00-0xb0f has been reserved [ 21.858331] system 00:01: ioport range 0xb10-0xb1f has been reserved [ 21.858395] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 21.858451] system 00:07: ioport range 0x220-0x225 has been reserved [ 21.858513] system 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved [ 21.858581] system 00:0b: iomem range 0xccc00-0xcffff has been reserved [ 21.858638] system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved [ 21.858695] system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved [ 21.858752] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved [ 21.858809] system 00:0b: iomem range 0x7fef0000-0x7ffeffff could not be reserved [ 21.858875] system 00:0b: iomem range 0xfed00000-0xfed000ff has been reserved [ 21.858932] system 00:0b: iomem range 0x7fee0000-0x7fefffff could not be reserved [ 21.858997] system 00:0b: iomem range 0xffff0000-0xffffffff has been reserved [ 21.859055] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 21.859112] system 00:0b: iomem range 0x100000-0x7fedffff could not be reserved [ 21.859177] system 00:0b: iomem range 0x0-0x0 could not be reserved [ 21.860229] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved [ 21.860657] PCI: Bridge: 0000:00:02.0 [ 21.860711] IO window: c000-cfff [ 21.860766] MEM window: f8000000-fbffffff [ 21.860820] PREFETCH window: d0000000-dfffffff [ 21.860877] PCI: Bridge: 0000:00:07.0 [ 21.860930] IO window: d000-dfff [ 21.860984] MEM window: fdc00000-fdcfffff [ 21.861038] PREFETCH window: fdd00000-fddfffff [ 21.861094] PCI: Bridge: 0000:00:14.4 [ 21.861148] IO window: b000-bfff [ 21.861204] MEM window: fdf00000-fdffffff [ 21.861260] PREFETCH window: fde00000-fdefffff [ 21.861330] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 21.861338] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 21.861355] NET: Registered protocol family 2 [ 21.861445] Time: acpi_pm clocksource has been installed. [ 21.861513] Switched to high resolution mode on CPU 0 [ 21.861953] Switched to high resolution mode on CPU 1 [ 21.893480] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 21.894333] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 21.896323] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 21.896869] TCP: Hash tables configured (established 262144 bind 65536) [ 21.896927] TCP reno registered [ 21.905513] checking if image is initramfs... it is [ 22.482301] Freeing initrd memory: 7505k freed [ 22.487099] audit: initializing netlink socket (disabled) [ 22.487165] audit(1212030230.244:1): initialized [ 22.489184] VFS: Disk quotas dquot_6.5.1 [ 22.489306] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 22.489491] io scheduler noop registered [ 22.489545] io scheduler anticipatory registered [ 22.489599] io scheduler deadline registered [ 22.489746] io scheduler cfq registered (default) [ 22.748718] Boot video device is 0000:01:00.0 [ 22.748868] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 22.748890] assign_interrupt_mode Found MSI capability [ 22.748969] Allocate Port Service[0000:00:02.0:pcie00] [ 22.749034] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 22.749055] assign_interrupt_mode Found MSI capability [ 22.749128] Allocate Port Service[0000:00:07.0:pcie00] [ 22.776607] Real Time Clock Driver v1.12ac [ 22.776826] hpet_acpi_add: no address or irqs in _CRS [ 22.776901] Linux agpgart interface v0.102 [ 22.776956] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 22.777161] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 22.777806] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 22.778545] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 22.778668] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 22.778859] PNP: No PS/2 controller found. Probing ports directly. [ 22.779256] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 22.779313] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 22.792305] mice: PS/2 mouse device common for all mice [ 22.792395] cpuidle: using governor ladder [ 22.792450] cpuidle: using governor menu [ 22.792649] NET: Registered protocol family 1 [ 22.792803] registered taskstats version 1 [ 22.792977] Magic number: 8:2:59 [ 22.793152] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 22.793219] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 22.793274] EDD information not available. [ 22.793333] Freeing unused kernel memory: 320k freed [ 22.967694] fuse init (API version 7.9) [ 22.981319] ACPI: Fan [FAN] (on) [ 22.986032] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 22.986192] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 22.987624] ACPI: Thermal Zone [THRM] (40 C) [ 23.244875] r8169 Gigabit Ethernet driver 2.2LK loaded [ 23.244969] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 23.245097] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 23.245347] eth0: RTL8168b/8111b at 0xffffc200008ae000, 00:1a:92:e2:41:8a, XID 38000000 IRQ 509 [ 23.293238] SCSI subsystem initialized [ 23.312390] usbcore: registered new interface driver usbfs [ 23.312469] usbcore: registered new interface driver hub [ 23.321585] usbcore: registered new device driver usb [ 23.323216] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 23.323258] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 23.323544] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 23.323839] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 23.323922] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000 [ 23.340361] libata version 3.00 loaded. [ 23.384406] usb usb1: configuration #1 chosen from 1 choice [ 23.384486] hub 1-0:1.0: USB hub found [ 23.384545] hub 1-0:1.0: 2 ports detected [ 23.488231] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 23.488514] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 23.488625] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [ 23.488710] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000 [ 23.548172] usb usb2: configuration #1 chosen from 1 choice [ 23.548250] hub 2-0:1.0: USB hub found [ 23.548308] hub 2-0:1.0: 2 ports detected [ 23.652015] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 23.652287] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 23.652399] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 23.652482] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000 [ 23.711944] usb usb3: configuration #1 chosen from 1 choice [ 23.712020] hub 3-0:1.0: USB hub found [ 23.712080] hub 3-0:1.0: 2 ports detected [ 23.815746] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17 [ 23.816027] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 23.816141] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4 [ 23.816218] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000 [ 23.875716] usb usb4: configuration #1 chosen from 1 choice [ 23.875789] hub 4-0:1.0: USB hub found [ 23.875847] hub 4-0:1.0: 2 ports detected [ 23.966582] usb 2-1: new low speed USB device using ohci_hcd and address 2 [ 23.979033] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18 [ 23.979316] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 23.979432] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5 [ 23.979530] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000 [ 24.039484] usb usb5: configuration #1 chosen from 1 choice [ 24.039559] hub 5-0:1.0: USB hub found [ 24.039617] hub 5-0:1.0: 2 ports detected [ 24.142921] ahci 0000:00:12.0: version 3.0 [ 24.142954] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 24.143262] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 24.143322] ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP [ 24.181340] usb 2-1: configuration #1 chosen from 1 choice [ 24.498248] usb 2-2: new full speed USB device using ohci_hcd and address 3 [ 24.717628] usb 2-2: configuration #1 chosen from 1 choice [ 24.721673] usbcore: registered new interface driver hiddev [ 24.726743] input: HID 046a:0011 as /devices/pci0000:00/0000:00:13.1/usb2/2-1/2-1:1.0/input/input1 [ 24.754452] input,hidraw0: USB HID v1.10 Keyboard [HID 046a:0011] on usb-0000:00:13.1-1 [ 24.757676] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:13.1/usb2/2-2/2-2:1.0/input/input2 [ 24.774384] input,hidraw1: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:13.1-2 [ 24.780505] hiddev96hidraw2: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:13.1-2 [ 24.780696] usbcore: registered new interface driver usbhid [ 24.780752] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 25.145399] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 25.145468] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part [ 25.146491] scsi0 : ahci [ 25.146752] scsi1 : ahci [ 25.146947] scsi2 : ahci [ 25.147141] scsi3 : ahci [ 25.147267] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 25.147332] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 25.147395] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 25.147458] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 25.620332] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 25.626013] ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7 [ 25.626070] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 25.628085] ata1.00: configured for UDMA/133 [ 25.935901] ata2: SATA link down (SStatus 0 SControl 300) [ 26.247475] ata3: SATA link down (SStatus 0 SControl 300) [ 26.559048] ata4: SATA link down (SStatus 0 SControl 300) [ 26.559598] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 26.559694] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19 [ 26.559967] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 26.560085] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6 [ 26.560194] ehci_hcd 0000:00:13.5: debug port 1 [ 26.560265] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000 [ 26.560794] usb 2-1: USB disconnect, address 2 [ 26.567739] Driver 'sd' needs updating - please use bus_type methods [ 26.571035] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 26.571207] usb usb6: configuration #1 chosen from 1 choice [ 26.571286] hub 6-0:1.0: USB hub found [ 26.571344] hub 6-0:1.0: 10 ports detected [ 26.575565] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 26.575632] sd 0:0:0:0: [sda] Write Protect is off [ 26.575687] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 26.575702] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 26.575809] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 26.575872] sd 0:0:0:0: [sda] Write Protect is off [ 26.575927] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 26.575940] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 26.576008] sda: sda1 sda2 sda3 [ 26.669470] sd 0:0:0:0: [sda] Attached SCSI disk [ 26.674050] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 26.675407] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 26.675563] ACPI: PCI interrupt for device 0000:00:14.1 disabled [ 26.675325] ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 26.728549] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fdffe000-fdffe7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 26.734047] usb 2-2: USB disconnect, address 3 [ 26.736637] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 26.736841] scsi4 : pata_atiixp [ 26.736937] scsi5 : pata_atiixp [ 26.737402] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xe400 irq 14 [ 26.737457] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xe408 irq 15 [ 26.980031] Attempting manual resume [ 26.980086] swsusp: Resume From Partition 8:3 [ 26.980088] PM: Checking swsusp image. [ 26.980251] PM: Resume from disk failed. [ 26.988343] ReiserFS: sda2: found reiserfs format "3.6" with standard journal [ 26.988409] ReiserFS: sda2: using ordered data mode [ 27.003024] ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 27.004298] ReiserFS: sda2: checking transaction log (sda2) [ 27.039227] ReiserFS: sda2: Using r5 hash to sort names [ 27.055720] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-H10A, JL05, max UDMA/33 [ 27.227424] ata5.00: configured for UDMA/33 [ 27.386130] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H10A JL05 PQ: 0 ANSI: 5 [ 27.386271] scsi 4:0:0:0: Attached scsi generic sg1 type 5 [ 27.618486] usb 2-1: new low speed USB device using ohci_hcd and address 4 [ 27.832556] usb 2-1: configuration #1 chosen from 1 choice [ 27.839641] input: HID 046a:0011 as /devices/pci0000:00/0000:00:13.1/usb2/2-1/2-1:1.0/input/input3 [ 27.850188] input,hidraw0: USB HID v1.10 Keyboard [HID 046a:0011] on usb-0000:00:13.1-1 [ 28.007585] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000106a997] [ 28.165741] usb 2-2: new full speed USB device using ohci_hcd and address 5 [ 28.389827] usb 2-2: configuration #1 chosen from 1 choice [ 28.397925] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:13.1/usb2/2-2/2-2:1.0/input/input4 [ 28.409430] input,hidraw1: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:13.1-2 [ 28.415743] hiddev96hidraw2: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:13.1-2 [ 38.439914] parport_pc 00:09: reported by Plug and Play ACPI [ 38.440008] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 38.488758] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 38.563318] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 38.583281] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 38.623582] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 38.623642] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 38.766615] input: Power Button (FF) as /devices/virtual/input/input6 [ 38.822426] ACPI: Power Button (FF) [PWRF] [ 38.822554] input: Power Button (CM) as /devices/virtual/input/input7 [ 38.874888] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [ 38.882348] ACPI: Power Button (CM) [PWRB] [ 39.010323] nvidia: module license 'NVIDIA' taints kernel. [ 39.434144] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 39.434254] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 39.434413] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.12 Thu Feb 14 17:51:09 PST 2008 [ 39.819262] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16 [ 39.829063] r8169: eth0: link up [ 39.829487] r8169: eth0: link up [ 39.865877] Driver 'sr' needs updating - please use bus_type methods [ 39.886734] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 39.886803] Uniform CD-ROM driver Revision: 3.20 [ 39.886915] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 41.438190] NET: Registered protocol family 17 [ 41.448496] loop: module loaded [ 41.472895] lp0: using parport0 (interrupt-driven). [ 41.590014] Adding 3172828k swap on /dev/sda3. Priority:-1 extents:1 across:3172828k [ 50.893712] NET: Registered protocol family 10 [ 50.893957] lo: Disabled Privacy Extensions [ 52.686926] ip_tables: (C) 2000-2006 Netfilter Core Team [ 54.651963] No dock devices found. [ 55.261790] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ processors (2 cpu cores) (version 2.20.00) [ 55.261503] powernow-k8: 0 : fid 0xd (2100 MHz), vid 0x9 [ 55.261508] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xa [ 55.261510] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xc [ 55.261512] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 [ 56.453438] ppdev: user-space parallel port driver [ 56.640651] audit(1212030265.292:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5511 profile="/usr/sbin/cupsd" namespace="default" [ 58.169177] Clocksource tsc unstable (delta = -136368942 ns) [ 58.351405] audit(1212030267.346:3): type=1502 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/var/log/samba/samba.log" pid=5847 profile="/usr/sbin/smbd" namespace="default" [ 58.351431] audit(1212030267.346:4): type=1502 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/var/log/samba/samba.log" pid=5847 profile="/usr/sbin/smbd" namespace="default" [ 58.412934] audit(1212030267.472:5): type=1502 operation="inode_permission" requested_mask="r::" denied_mask="r::" name="/etc/samba/smbpasswd" pid=5848 profile="/usr/sbin/smbd" namespace="default" [ 58.412967] audit(1212030267.472:6): type=1502 operation="file_lock" requested_mask="k::" denied_mask="k::" name="/etc/samba/smbpasswd" pid=5848 profile="/usr/sbin/smbd" namespace="default" [ 58.412991] audit(1212030267.472:7): type=1502 operation="setattr" requested_mask="w::" denied_mask="w::" attribute="mode,ctime," name="/etc/samba/smbpasswd" pid=5848 profile="/usr/sbin/smbd" namespace="default" [ 58.417714] audit(1212030267.484:8): type=1502 operation="file_lock" requested_mask="k::" denied_mask="k::" name="/etc/samba/smbpasswd" pid=5848 profile="/usr/sbin/smbd" namespace="default" [ 59.582220] eth0: no IPv6 routers present [ 64.578373] hda-intel: Invalid position buffer, using LPIB read method instead.