[ 36.552922] ip_tables: (C) 2000-2006 Netfilter Core Team [ 38.035748] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 39.553831] Ebtables v2.0 registered [ 40.074887] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 40.930035] wlan0: no IPv6 routers present [ 47.253665] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=600 [ 55.428292] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=600 [ 67.817515] padlock_sha: VIA PadLock Hash Engine not detected. [ 68.444585] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 138.211175] wlan0: deauthenticating from 00:26:f2:f7:cf:b2 by local choice (reason=3) [ 138.326988] cfg80211: All devices are disconnected, going to restore regulatory settings [ 138.326997] cfg80211: Restoring regulatory settings [ 138.327020] cfg80211: Calling CRDA to update world regulatory domain [ 138.371218] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 138.371228] cfg80211: World regulatory domain updated: [ 138.371231] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 138.371236] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 138.371240] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 138.371245] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 138.371249] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 138.371253] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 141.706754] r8169 0000:04:00.0: eth0: link down [ 141.707665] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 141.860910] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 144.227422] wlan0: authenticate with 00:26:f2:f7:cf:b2 (try 1) [ 144.229617] wlan0: authenticated [ 144.249042] wlan0: associate with 00:26:f2:f7:cf:b2 (try 1) [ 144.351374] wlan0: RX AssocResp from 00:26:f2:f7:cf:b2 (capab=0x411 status=0 aid=2) [ 144.351387] wlan0: associated [ 144.359351] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 147.658360] wlan0: deauthenticating from 00:26:f2:f7:cf:b2 by local choice (reason=3) [ 147.719106] cfg80211: All devices are disconnected, going to restore regulatory settings [ 147.719115] cfg80211: Restoring regulatory settings [ 147.719132] cfg80211: Calling CRDA to update world regulatory domain [ 147.741436] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 147.741454] cfg80211: World regulatory domain updated: [ 147.741459] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 147.741468] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 147.741475] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 147.741482] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 147.741489] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 147.741496] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 150.553518] r8169 0000:04:00.0: eth0: link down [ 150.554899] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 150.682209] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 153.047396] wlan0: authenticate with 00:26:f2:f7:cf:b2 (try 1) [ 153.049648] wlan0: authenticated [ 153.067746] wlan0: associate with 00:26:f2:f7:cf:b2 (try 1) [ 153.169783] wlan0: RX AssocResp from 00:26:f2:f7:cf:b2 (capab=0x411 status=0 aid=2) [ 153.169794] wlan0: associated [ 153.178621] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 156.390096] wlan0: deauthenticating from 00:26:f2:f7:cf:b2 by local choice (reason=3) [ 156.457027] cfg80211: All devices are disconnected, going to restore regulatory settings [ 156.457035] cfg80211: Restoring regulatory settings [ 156.457051] cfg80211: Calling CRDA to update world regulatory domain [ 156.501254] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 156.501266] cfg80211: World regulatory domain updated: [ 156.501269] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 156.501275] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 156.501280] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 156.501284] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 156.501288] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 156.501293] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 159.113209] r8169 0000:04:00.0: eth0: link down [ 159.114514] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 159.244687] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 161.644651] wlan0: authenticate with 00:26:f2:f7:cf:b2 (try 1) [ 161.647618] wlan0: authenticated [ 161.666120] wlan0: associate with 00:26:f2:f7:cf:b2 (try 1) [ 161.760859] wlan0: RX AssocResp from 00:26:f2:f7:cf:b2 (capab=0x411 status=0 aid=2) [ 161.760870] wlan0: associated [ 161.769401] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 165.050599] wlan0: deauthenticating from 00:26:f2:f7:cf:b2 by local choice (reason=3) [ 165.113360] cfg80211: All devices are disconnected, going to restore regulatory settings [ 165.113368] cfg80211: Restoring regulatory settings [ 165.113390] cfg80211: Calling CRDA to update world regulatory domain [ 165.151245] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 165.151256] cfg80211: World regulatory domain updated: [ 165.151259] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 165.151264] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 165.151268] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 165.151273] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 165.151277] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 165.151281] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 168.323691] r8169 0000:04:00.0: eth0: link down [ 168.325049] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 168.454613] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 170.828829] wlan0: authenticate with 00:26:f2:f7:cf:b2 (try 1) [ 170.831101] wlan0: authenticated [ 170.831827] wlan0: associate with 00:26:f2:f7:cf:b2 (try 1) [ 170.835355] wlan0: RX AssocResp from 00:26:f2:f7:cf:b2 (capab=0x411 status=0 aid=4) [ 170.835364] wlan0: associated [ 170.843975] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 173.993154] wlan0: deauthenticating from 00:26:f2:f7:cf:b2 by local choice (reason=3) [ 174.186882] cfg80211: All devices are disconnected, going to restore regulatory settings [ 174.186890] cfg80211: Restoring regulatory settings [ 174.186897] cfg80211: Calling CRDA to update world regulatory domain [ 174.211207] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 174.211218] cfg80211: World regulatory domain updated: [ 174.211221] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 174.211226] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 174.211231] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 174.211274] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 174.211279] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 174.211283] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 179.434667] r8169 0000:04:00.0: eth0: link down [ 179.435971] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 179.562570] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 181.927134] wlan0: authenticate with 00:26:f2:f7:cf:b2 (try 1) [ 181.929359] wlan0: authenticated [ 181.948468] wlan0: associate with 00:26:f2:f7:cf:b2 (try 1) [ 181.952007] wlan0: RX AssocResp from 00:26:f2:f7:cf:b2 (capab=0x411 status=0 aid=4) [ 181.952013] wlan0: associated [ 181.960156] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 184.968891] wlan0: deauthenticating from 00:26:f2:f7:cf:b2 by local choice (reason=3) [ 185.048598] cfg80211: All devices are disconnected, going to restore regulatory settings [ 185.048607] cfg80211: Restoring regulatory settings [ 185.048626] cfg80211: Calling CRDA to update world regulatory domain [ 185.092066] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 185.092076] cfg80211: World regulatory domain updated: [ 185.092079] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 185.092084] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 185.092089] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 185.092093] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 185.092097] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 185.092101] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 191.593389] r8169 0000:04:00.0: eth0: link down [ 191.594689] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 191.718157] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 194.077171] wlan0: authenticate with 00:26:f2:f7:cf:b2 (try 1) [ 194.079420] wlan0: authenticated [ 194.080181] wlan0: associate with 00:26:f2:f7:cf:b2 (try 1) [ 194.083678] wlan0: RX AssocResp from 00:26:f2:f7:cf:b2 (capab=0x411 status=0 aid=4) [ 194.083687] wlan0: associated [ 194.092490] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 196.859049] wlan0: deauthenticating from 00:26:f2:f7:cf:b2 by local choice (reason=3) [ 196.937526] cfg80211: All devices are disconnected, going to restore regulatory settings [ 196.937536] cfg80211: Restoring regulatory settings [ 196.937542] cfg80211: Calling CRDA to update world regulatory domain [ 196.961351] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 196.961361] cfg80211: World regulatory domain updated: [ 196.961364] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 196.961369] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 196.961374] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 196.961378] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 196.961382] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 196.961387] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 200.320996] r8169 0000:04:00.0: eth0: link down [ 200.322851] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 200.450858] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 202.887323] wlan0: authenticate with 00:26:f2:f7:cf:b2 (try 1) [ 202.889784] wlan0: authenticated [ 202.907641] wlan0: associate with 00:26:f2:f7:cf:b2 (try 1) [ 202.911441] wlan0: RX AssocResp from 00:26:f2:f7:cf:b2 (capab=0x411 status=0 aid=4) [ 202.911451] wlan0: associated [ 202.920077] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 212.980334] wlan0: no IPv6 routers present [ 218.530620] wlan0: deauthenticating from 00:26:f2:f7:cf:b2 by local choice (reason=3) [ 218.646935] cfg80211: All devices are disconnected, going to restore regulatory settings [ 218.646944] cfg80211: Restoring regulatory settings [ 218.646966] cfg80211: Calling CRDA to update world regulatory domain [ 218.682693] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 218.682711] cfg80211: World regulatory domain updated: [ 218.682716] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 218.682724] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 218.682732] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 218.682739] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 218.682746] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 218.682753] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 221.655999] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 224.017125] wlan0: authenticate with 00:26:f2:f7:cf:b2 (try 1) [ 224.020739] wlan0: authenticated [ 224.038301] wlan0: associate with 00:26:f2:f7:cf:b2 (try 1) [ 224.041795] wlan0: RX AssocResp from 00:26:f2:f7:cf:b2 (capab=0x411 status=0 aid=4) [ 224.041801] wlan0: associated [ 224.050228] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 226.546270] wlan0: deauthenticating from 00:26:f2:f7:cf:b2 by local choice (reason=3) [ 226.627978] cfg80211: All devices are disconnected, going to restore regulatory settings [ 226.627989] cfg80211: Restoring regulatory settings [ 226.628010] cfg80211: Calling CRDA to update world regulatory domain [ 226.672000] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 226.672018] cfg80211: World regulatory domain updated: [ 226.672023] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 226.672031] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 226.672038] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 226.672045] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 226.672051] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 226.672059] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 233.346775] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 235.698105] wlan0: authenticate with 00:26:f2:f7:cf:b2 (try 1) [ 235.700333] wlan0: authenticated [ 235.701042] wlan0: associate with 00:26:f2:f7:cf:b2 (try 1) [ 235.704640] wlan0: RX AssocResp from 00:26:f2:f7:cf:b2 (capab=0x411 status=0 aid=4) [ 235.704649] wlan0: associated [ 235.713366] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 239.882845] wlan0: deauthenticating from 00:26:f2:f7:cf:b2 by local choice (reason=3) [ 239.937087] cfg80211: All devices are disconnected, going to restore regulatory settings [ 239.937096] cfg80211: Restoring regulatory settings [ 239.937103] cfg80211: Calling CRDA to update world regulatory domain [ 239.991678] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 239.991693] cfg80211: World regulatory domain updated: [ 239.991698] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 239.991706] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 239.991714] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 239.991720] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 239.991728] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 239.991735] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 249.996193] connmand[908]: segfault at 1bc ip 00007f4e583a7030 sp 00007fff3acac930 error 4 in connmand[7f4e58372000+75000] [ 271.518672] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 274.007119] wlan0: authenticate with 00:26:f2:f7:cf:b2 (try 1) [ 274.009333] wlan0: authenticated [ 274.028086] wlan0: associate with 00:26:f2:f7:cf:b2 (try 1) [ 274.031640] wlan0: RX AssocResp from 00:26:f2:f7:cf:b2 (capab=0x411 status=0 aid=4) [ 274.031650] wlan0: associated [ 274.042436] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 278.500082] wlan0: deauthenticating from 00:26:f2:f7:cf:b2 by local choice (reason=3) [ 278.558174] cfg80211: All devices are disconnected, going to restore regulatory settings [ 278.558187] cfg80211: Restoring regulatory settings [ 278.558217] cfg80211: Calling CRDA to update world regulatory domain [ 278.614218] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 278.614227] cfg80211: World regulatory domain updated: [ 278.614230] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 278.614235] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 278.614240] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 278.614244] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 278.614248] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 278.614252] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 281.473485] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 283.827202] wlan0: authenticate with 00:26:f2:f7:cf:b2 (try 1) [ 283.829382] wlan0: authenticated [ 283.847054] wlan0: associate with 00:26:f2:f7:cf:b2 (try 1) [ 283.850637] wlan0: RX AssocResp from 00:26:f2:f7:cf:b2 (capab=0x411 status=0 aid=4) [ 283.850647] wlan0: associated [ 283.859238] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 290.698731] wlan0: deauthenticating from 00:26:f2:f7:cf:b2 by local choice (reason=3) [ 290.747086] cfg80211: All devices are disconnected, going to restore regulatory settings [ 290.747095] cfg80211: Restoring regulatory settings [ 290.747113] cfg80211: Calling CRDA to update world regulatory domain [ 290.771241] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 290.771252] cfg80211: World regulatory domain updated: [ 290.771255] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 290.771260] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 290.771264] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 290.771268] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 290.771273] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 290.771277] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 293.260049] r8169 0000:04:00.0: eth0: link down [ 293.261856] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 293.406261] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 295.757162] wlan0: authenticate with 00:26:f2:f7:cf:b2 (try 1) [ 295.759539] wlan0: authenticated [ 295.760251] wlan0: associate with 00:26:f2:f7:cf:b2 (try 1) [ 295.763789] wlan0: RX AssocResp from 00:26:f2:f7:cf:b2 (capab=0x411 status=0 aid=4) [ 295.763798] wlan0: associated [ 295.772403] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 298.950492] wlan0: deauthenticating from 00:26:f2:f7:cf:b2 by local choice (reason=3) [ 299.057922] cfg80211: All devices are disconnected, going to restore regulatory settings [ 299.057932] cfg80211: Restoring regulatory settings [ 299.057952] cfg80211: Calling CRDA to update world regulatory domain [ 299.081675] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 299.081686] cfg80211: World regulatory domain updated: [ 299.081689] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 299.081694] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 299.081698] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 299.081703] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 299.081707] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 299.081711] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 301.267377] r8169 0000:04:00.0: eth0: link down [ 301.268666] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 301.404814] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 303.797147] wlan0: authenticate with 00:26:f2:f7:cf:b2 (try 1) [ 303.799385] wlan0: authenticated [ 303.816784] wlan0: associate with 00:26:f2:f7:cf:b2 (try 1) [ 303.820278] wlan0: RX AssocResp from 00:26:f2:f7:cf:b2 (capab=0x411 status=0 aid=4) [ 303.820287] wlan0: associated [ 303.828778] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 312.421752] wlan0: deauthenticating from 00:26:f2:f7:cf:b2 by local choice (reason=3) [ 312.497017] cfg80211: All devices are disconnected, going to restore regulatory settings [ 312.497026] cfg80211: Restoring regulatory settings [ 312.497042] cfg80211: Calling CRDA to update world regulatory domain [ 312.532472] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 312.532483] cfg80211: World regulatory domain updated: [ 312.532486] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 312.532491] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 312.532496] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 312.532500] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 312.532504] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 312.532508] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 318.959028] r8169 0000:04:00.0: eth0: link down [ 318.960533] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 319.097672] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 321.477125] wlan0: authenticate with 00:26:f2:f7:cf:b2 (try 1) [ 321.479355] wlan0: authenticated [ 321.497725] wlan0: associate with 00:26:f2:f7:cf:b2 (try 1) [ 321.501343] wlan0: RX AssocResp from 00:26:f2:f7:cf:b2 (capab=0x411 status=0 aid=4) [ 321.501349] wlan0: associated [ 321.509449] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 332.380045] wlan0: no IPv6 routers present [ 344.851279] wlan0: deauthenticating from 00:26:f2:f7:cf:b2 by local choice (reason=3) [ 344.958018] cfg80211: All devices are disconnected, going to restore regulatory settings [ 344.958027] cfg80211: Restoring regulatory settings [ 344.958035] cfg80211: Calling CRDA to update world regulatory domain [ 345.001929] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 345.001946] cfg80211: World regulatory domain updated: [ 345.001951] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 345.001959] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 345.001966] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 345.001973] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 345.001980] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 345.001987] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 347.402125] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 349.847118] wlan0: authenticate with 00:26:f2:f7:cf:b2 (try 1) [ 349.849611] wlan0: authenticated [ 349.867348] wlan0: associate with 00:26:f2:f7:cf:b2 (try 1) [ 349.872344] wlan0: RX AssocResp from 00:26:f2:f7:cf:b2 (capab=0x411 status=0 aid=4) [ 349.872353] wlan0: associated [ 349.882289] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 360.240287] wlan0: no IPv6 routers present [ 492.726184] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 492.735860] mount.crypt[2538]: segfault at 0 ip 0000000000406ede sp 00007fff65cf6730 error 4 in mount.crypt[400000+9000] [ 495.009156] PM: Syncing filesystems ... done. [ 495.012693] PM: Preparing system for mem sleep [ 495.320436] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 495.340137] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 495.360120] PM: Entering mem sleep [ 495.360166] Suspending console(s) (use no_console_suspend to debug) [ 495.368466] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 495.368564] sd 0:0:0:0: [sda] Stopping disk [ 495.415495] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 495.415511] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 495.415524] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 495.415538] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 495.415636] ehci_hcd 0000:00:1a.7: PCI INT C disabled [ 495.415653] uhci_hcd 0000:00:1a.2: PCI INT C disabled [ 495.415667] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 495.415679] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 495.520101] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 495.540027] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 124.469 msecs [ 496.399401] PM: suspend of drv:sd dev:0:0:0:0 complete after 1030.941 msecs [ 496.399416] PM: suspend of drv:scsi dev:target0:0:0 complete after 1030.834 msecs [ 496.399431] PM: suspend of drv:scsi dev:host0 complete after 1030.726 msecs [ 496.410034] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 994.578 msecs [ 496.410049] PM: suspend of drv: dev:pci0000:00 complete after 993.862 msecs [ 496.410058] PM: suspend of devices complete after 1049.242 msecs [ 496.410062] PM: suspend devices took 1.050 seconds [ 496.410825] r8169 0000:04:00.0: PME# enabled [ 496.410835] r8169 0000:04:00.0: wake-up capability enabled by ACPI [ 496.490310] PM: late suspend of devices complete after 80.243 msecs [ 496.490945] ACPI: Preparing to enter system sleep state S3 [ 496.540836] PM: Saving platform NVS memory [ 496.541632] Disabling non-boot CPUs ... [ 496.650035] CPU 1 is now offline [ 496.650565] Extended CMOS year: 2000 [ 496.650565] Back to C! [ 496.650565] PM: Restoring platform NVS memory [ 496.650565] Extended CMOS year: 2000 [ 496.650565] Enabling non-boot CPUs ... [ 496.650565] Booting Node 0 Processor 1 APIC 0x1 [ 496.820024] Switched to NOHz mode on CPU #1 [ 496.820597] CPU1 is up [ 496.821805] ACPI: Waking up from system sleep state S3 [ 497.080501] Monitor-Mwait will be used to enter C-3 state [ 497.161631] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 497.161648] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 497.161686] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [ 497.161726] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 497.161769] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 497.161811] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 497.161860] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [ 497.161897] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x105) [ 497.161919] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 497.161927] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) [ 497.161961] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) [ 497.161975] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xf1f1f001) [ 497.161981] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xf7f0f600) [ 497.161988] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020) [ 497.161998] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 497.162006] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 497.162060] pcieport 0000:00:1c.3: restoring config space at offset 0xf (was 0x40400, writing 0x40405) [ 497.162073] pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xf5f1f201) [ 497.162081] pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030) [ 497.162091] pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 497.162099] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 497.162165] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 497.162207] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 497.162249] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 497.162298] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [ 497.162327] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff) [ 497.162340] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 497.162346] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 497.162353] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0) [ 497.162366] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 497.162444] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x205) [ 497.162468] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 497.162523] pci 0000:00:1f.3: restoring config space at offset 0x4 (was 0x4, writing 0xc0000004) [ 497.162573] ath9k 0000:02:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 497.162600] ath9k 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf6000004) [ 497.162608] ath9k 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 497.162618] ath9k 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 497.162752] r8169 0000:04:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x105) [ 497.162805] r8169 0000:04:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xf200000c) [ 497.162827] r8169 0000:04:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xf400000c) [ 497.162849] r8169 0000:04:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x3001) [ 497.162865] r8169 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 497.162887] r8169 0000:04:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 497.163660] PM: early resume of devices complete after 2.205 msecs [ 497.163761] i915 0000:00:02.0: setting latency timer to 64 [ 497.163951] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 497.163959] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 497.163987] usb usb3: root hub lost power or was reset [ 497.164007] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 497.164020] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 497.164053] usb usb4: root hub lost power or was reset [ 497.164073] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 497.164086] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 497.164120] usb usb5: root hub lost power or was reset [ 497.164137] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 497.164145] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 497.164202] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 497.164210] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 497.164262] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 497.164321] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 497.164329] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 497.164355] usb usb6: root hub lost power or was reset [ 497.164370] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 497.164377] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 497.164403] usb usb7: root hub lost power or was reset [ 497.164418] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 497.164426] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 497.164453] usb usb8: root hub lost power or was reset [ 497.164469] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 497.164477] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 497.164527] pci 0000:00:1e.0: setting latency timer to 64 [ 497.164549] ahci 0000:00:1f.2: setting latency timer to 64 [ 497.179197] r8169 0000:04:00.0: wake-up capability disabled by ACPI [ 497.179214] r8169 0000:04:00.0: PME# disabled [ 497.182944] sd 0:0:0:0: [sda] Starting disk [ 497.220092] r8169 0000:04:00.0: eth0: link down [ 497.272395] PM: resume of drv:battery dev:PNP0C0A:00 complete after 108.508 msecs [ 497.310050] PM: resume of drv:usb dev:usb3 complete after 128.102 msecs [ 497.310065] PM: resume of drv:hub dev:3-0:1.0 complete after 128.081 msecs [ 497.310077] PM: resume of drv: dev:ep_00 complete after 128.029 msecs [ 497.310083] PM: resume of drv:usb dev:usb4 complete after 128.003 msecs [ 497.310087] PM: resume of drv: dev:ep_81 complete after 128.070 msecs [ 497.310096] PM: resume of drv:hub dev:4-0:1.0 complete after 127.980 msecs [ 497.310105] PM: resume of drv: dev:ep_00 complete after 127.923 msecs [ 497.310112] PM: resume of drv:usb dev:usb5 complete after 127.896 msecs [ 497.310116] PM: resume of drv: dev:ep_81 complete after 127.963 msecs [ 497.310123] PM: resume of drv:hub dev:5-0:1.0 complete after 127.873 msecs [ 497.310133] PM: resume of drv: dev:ep_00 complete after 127.814 msecs [ 497.310137] PM: resume of drv:usb dev:usb6 complete after 127.786 msecs [ 497.310141] PM: resume of drv: dev:ep_81 complete after 127.853 msecs [ 497.310149] PM: resume of drv:hub dev:6-0:1.0 complete after 127.763 msecs [ 497.310159] PM: resume of drv: dev:ep_00 complete after 127.708 msecs [ 497.310167] PM: resume of drv: dev:ep_81 complete after 127.748 msecs [ 497.310457] PM: resume of drv:i915 dev:0000:00:02.0 complete after 146.703 msecs [ 497.320027] PM: resume of drv:usb dev:usb1 complete after 140.905 msecs [ 497.320042] PM: resume of drv:hub dev:1-0:1.0 complete after 138.307 msecs [ 497.320046] PM: resume of drv: dev:ep_00 complete after 138.213 msecs [ 497.320071] PM: resume of drv: dev:ep_81 complete after 138.244 msecs [ 497.420040] PM: resume of drv:usb dev:usb7 complete after 237.557 msecs [ 497.420055] PM: resume of drv:hub dev:7-0:1.0 complete after 237.534 msecs [ 497.420059] PM: resume of drv:usb dev:usb8 complete after 237.441 msecs [ 497.420066] PM: resume of drv: dev:ep_00 complete after 237.481 msecs [ 497.420076] PM: resume of drv:hub dev:8-0:1.0 complete after 237.420 msecs [ 497.420079] PM: resume of drv: dev:ep_81 complete after 237.525 msecs [ 497.420085] PM: resume of drv: dev:ep_00 complete after 237.347 msecs [ 497.420089] PM: resume of drv: dev:ep_81 complete after 237.385 msecs [ 497.440040] usb 1-3: reset high speed USB device using ehci_hcd and address 2 [ 497.460041] PM: resume of drv:usb dev:usb2 complete after 278.204 msecs [ 497.460056] PM: resume of drv:hub dev:2-0:1.0 complete after 278.213 msecs [ 497.460076] PM: resume of drv: dev:ep_81 complete after 278.195 msecs [ 497.460080] PM: resume of drv: dev:ep_00 complete after 278.162 msecs [ 497.540124] ata2: SATA link down (SStatus 0 SControl 300) [ 497.560080] ata6: SATA link down (SStatus 0 SControl 300) [ 497.580078] ata5: SATA link down (SStatus 0 SControl 300) [ 497.599546] PM: resume of drv:usb dev:1-3 complete after 416.728 msecs [ 497.599573] PM: resume of drv: dev:ep_00 complete after 416.657 msecs [ 497.599578] PM: resume of drv:uvcvideo dev:1-3:1.0 complete after 416.728 msecs [ 497.599589] PM: resume of drv:uvcvideo dev:1-3:1.1 complete after 416.695 msecs [ 497.599593] PM: resume of drv: dev:ep_81 complete after 416.725 msecs [ 497.710062] usb 7-1: reset full speed USB device using uhci_hcd and address 2 [ 497.868602] PM: resume of drv:usb dev:7-1 complete after 685.274 msecs [ 497.868629] PM: resume of drv: dev:ep_00 complete after 685.145 msecs [ 497.868634] PM: resume of drv:usbhid dev:7-1:1.0 complete after 685.281 msecs [ 497.868646] PM: resume of drv:usbhid dev:7-1:1.2 complete after 685.205 msecs [ 497.868651] PM: resume of drv:usbhid dev:7-1:1.1 complete after 685.256 msecs [ 497.868656] PM: resume of drv: dev:ep_81 complete after 685.286 msecs [ 497.868661] PM: resume of drv: dev:ep_82 complete after 685.243 msecs [ 497.868664] PM: resume of drv: dev:ep_83 complete after 685.201 msecs [ 497.970058] usb 8-2: reset full speed USB device using uhci_hcd and address 2 [ 498.132625] btusb 8-2:1.0: no reset_resume for driver btusb? [ 498.132630] btusb 8-2:1.1: no reset_resume for driver btusb? [ 498.380222] PM: resume of drv:usb dev:8-2 complete after 1197.198 msecs [ 498.380241] PM: resume of drv:usb dev:8-2:1.0 complete after 1197.193 msecs [ 498.380245] PM: resume of drv: dev:ep_00 complete after 1196.939 msecs [ 498.380264] PM: resume of drv: dev:ep_02 complete after 1197.150 msecs [ 498.380268] PM: resume of drv:usb dev:8-2:1.1 complete after 1197.129 msecs [ 498.380281] PM: resume of drv: dev:ep_82 complete after 1197.187 msecs [ 498.380285] PM: resume of drv:usb dev:8-2:1.2 complete after 1197.080 msecs [ 498.380296] PM: resume of drv: dev:ep_03 complete after 1197.114 msecs [ 498.380301] PM: resume of drv:usb dev:8-2:1.3 complete after 1197.019 msecs [ 498.380312] PM: resume of drv: dev:ep_04 complete after 1197.058 msecs [ 498.380316] PM: resume of drv: dev:ep_81 complete after 1197.245 msecs [ 498.380328] PM: resume of drv: dev:ep_84 complete after 1197.097 msecs [ 498.380331] PM: resume of drv: dev:ep_83 complete after 1197.168 msecs [ 500.040103] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 500.059508] ata1.00: configured for UDMA/133 [ 500.080491] PM: resume of drv:sd dev:0:0:0:0 complete after 2897.547 msecs [ 500.080517] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2897.517 msecs [ 500.080522] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2769.979 msecs [ 500.106332] PM: resume of devices complete after 2942.630 msecs [ 500.108508] wlan0: deauthenticated from 00:26:f2:f7:cf:b2 (Reason: 7) [ 500.120386] PM: resume devices took 2.960 seconds [ 500.120445] PM: Finishing wakeup. [ 500.120447] Restarting tasks ... done. [ 500.210778] video LNXVIDEO:01: Restoring backlight state [ 500.233680] cfg80211: All devices are disconnected, going to restore regulatory settings [ 500.233686] cfg80211: Restoring regulatory settings [ 500.233713] cfg80211: Calling CRDA to update world regulatory domain [ 500.242817] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 500.242826] cfg80211: World regulatory domain updated: [ 500.242829] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 500.242834] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 500.242838] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 500.242842] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 500.242847] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 500.242851] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 500.290142] [drm:i915_gem_do_execbuffer] *ERROR* Object ffff88013699ce00 [handle 748, index 1] appears more than once in object list [ 500.602753] indicator-netwo[2225]: segfault at 7f8800000018 ip 00007f8800a50b9d sp 00007fff7f6acbd0 error 4 in libgobject-2.0.so.0.2800.2[7f8800a1d000+4e000] [ 501.370360] wlan0: authenticate with 00:26:f2:f7:cf:b2 (try 1) [ 501.372503] wlan0: authenticated [ 501.404381] wlan0: associate with 00:26:f2:f7:cf:b2 (try 1) [ 501.407872] wlan0: RX ReassocResp from 00:26:f2:f7:cf:b2 (capab=0x411 status=0 aid=4) [ 501.407878] wlan0: associated [ 502.014390] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 502.027632] mount.crypt[3051]: segfault at 0 ip 0000000000406ede sp 00007ffff1759b00 error 4 in mount.crypt[400000+9000] [ 504.781733] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 504.790820] mount.crypt[3125]: segfault at 0 ip 0000000000406ede sp 00007fff6a8751d0 error 4 in mount.crypt[400000+9000] [ 755.035983] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 755.045527] mount.crypt[3619]: segfault at 0 ip 0000000000406ede sp 00007fffc8e7e880 error 4 in mount.crypt[400000+9000] [ 756.577011] PM: Syncing filesystems ... done. [ 756.581453] PM: Preparing system for mem sleep [ 756.880348] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 756.900188] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 756.920126] PM: Entering mem sleep [ 756.920175] Suspending console(s) (use no_console_suspend to debug) [ 756.947715] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 756.947809] sd 0:0:0:0: [sda] Stopping disk [ 756.993399] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 756.993413] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 756.993427] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 756.993441] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 756.993481] ehci_hcd 0000:00:1a.7: PCI INT C disabled [ 756.993494] uhci_hcd 0000:00:1a.2: PCI INT C disabled [ 756.993506] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 756.993518] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 757.100114] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 757.120020] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 126.557 msecs [ 758.002852] PM: suspend of drv:sd dev:0:0:0:0 complete after 1055.144 msecs [ 758.002867] PM: suspend of drv:scsi dev:target0:0:0 complete after 1055.155 msecs [ 758.002882] PM: suspend of drv:scsi dev:host0 complete after 1055.041 msecs [ 758.020023] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 1026.658 msecs [ 758.020037] PM: suspend of drv: dev:pci0000:00 complete after 1025.967 msecs [ 758.020046] PM: suspend of devices complete after 1099.209 msecs [ 758.020049] PM: suspend devices took 1.100 seconds [ 758.020814] r8169 0000:04:00.0: PME# enabled [ 758.020825] r8169 0000:04:00.0: wake-up capability enabled by ACPI [ 758.100259] PM: late suspend of devices complete after 80.203 msecs [ 758.100888] ACPI: Preparing to enter system sleep state S3 [ 758.150793] PM: Saving platform NVS memory [ 758.151577] Disabling non-boot CPUs ... [ 758.260034] CPU 1 is now offline [ 758.260515] Extended CMOS year: 2000 [ 758.260515] Back to C! [ 758.260515] PM: Restoring platform NVS memory [ 758.260515] Extended CMOS year: 2000 [ 758.260515] Enabling non-boot CPUs ... [ 758.260515] Booting Node 0 Processor 1 APIC 0x1 [ 758.430025] Switched to NOHz mode on CPU #1 [ 758.430585] CPU1 is up [ 758.431789] ACPI: Waking up from system sleep state S3 [ 758.741811] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 758.741828] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 758.741866] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [ 758.741906] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 758.741950] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 758.741992] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 758.742042] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [ 758.742079] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x105) [ 758.742100] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 758.742109] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) [ 758.742143] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) [ 758.742157] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xf1f1f001) [ 758.742163] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xf7f0f600) [ 758.742170] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x20002020) [ 758.742180] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 758.742188] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 758.742241] pcieport 0000:00:1c.3: restoring config space at offset 0xf (was 0x40400, writing 0x40405) [ 758.742255] pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xf5f1f201) [ 758.742263] pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20000000, writing 0x20003030) [ 758.742273] pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 758.742281] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 758.742347] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 758.742390] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 758.742432] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 758.742481] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [ 758.742510] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff) [ 758.742524] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 758.742530] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 758.742537] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0) [ 758.742550] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 758.742628] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x205) [ 758.742652] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 758.742707] pci 0000:00:1f.3: restoring config space at offset 0x4 (was 0x4, writing 0xc0000004) [ 758.742757] ath9k 0000:02:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 758.742785] ath9k 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf6000004) [ 758.742792] ath9k 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 758.742802] ath9k 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 758.742936] r8169 0000:04:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x105) [ 758.742989] r8169 0000:04:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xf200000c) [ 758.743012] r8169 0000:04:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xf400000c) [ 758.743030] r8169 0000:04:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x3001) [ 758.743046] r8169 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 758.743068] r8169 0000:04:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 758.743840] PM: early resume of devices complete after 2.205 msecs [ 758.743942] i915 0000:00:02.0: setting latency timer to 64 [ 758.744145] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 758.744153] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 758.744183] usb usb3: root hub lost power or was reset [ 758.744207] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 758.744218] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 758.744245] usb usb4: root hub lost power or was reset [ 758.744267] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 758.744278] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 758.744309] usb usb5: root hub lost power or was reset [ 758.744326] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 758.744334] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 758.744392] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 758.744400] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 758.744453] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 758.744511] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 758.744519] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 758.744546] usb usb6: root hub lost power or was reset [ 758.744562] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 758.744569] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 758.744595] usb usb7: root hub lost power or was reset [ 758.744610] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 758.744617] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 758.744644] usb usb8: root hub lost power or was reset [ 758.744660] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 758.744668] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 758.744717] pci 0000:00:1e.0: setting latency timer to 64 [ 758.744740] ahci 0000:00:1f.2: setting latency timer to 64 [ 758.758422] r8169 0000:04:00.0: wake-up capability disabled by ACPI [ 758.758437] r8169 0000:04:00.0: PME# disabled [ 758.761202] sd 0:0:0:0: [sda] Starting disk [ 758.800064] r8169 0000:04:00.0: eth0: link down [ 758.890073] PM: resume of drv:usb dev:usb3 complete after 129.064 msecs [ 758.890091] PM: resume of drv:hub dev:3-0:1.0 complete after 129.075 msecs [ 758.890102] PM: resume of drv: dev:ep_00 complete after 129.078 msecs [ 758.890106] PM: resume of drv:usb dev:usb4 complete after 129.075 msecs [ 758.890111] PM: resume of drv: dev:ep_81 complete after 129.091 msecs [ 758.890118] PM: resume of drv:hub dev:4-0:1.0 complete after 129.083 msecs [ 758.890128] PM: resume of drv: dev:ep_00 complete after 129.084 msecs [ 758.890133] PM: resume of drv:usb dev:usb5 complete after 129.084 msecs [ 758.890137] PM: resume of drv: dev:ep_81 complete after 129.095 msecs [ 758.890145] PM: resume of drv:hub dev:5-0:1.0 complete after 129.088 msecs [ 758.890154] PM: resume of drv: dev:ep_00 complete after 129.089 msecs [ 758.890160] PM: resume of drv:usb dev:usb6 complete after 129.089 msecs [ 758.890164] PM: resume of drv: dev:ep_81 complete after 129.099 msecs [ 758.890171] PM: resume of drv:hub dev:6-0:1.0 complete after 129.093 msecs [ 758.890180] PM: resume of drv: dev:ep_00 complete after 129.092 msecs [ 758.890187] PM: resume of drv: dev:ep_81 complete after 129.104 msecs [ 758.890440] PM: resume of drv:i915 dev:0000:00:02.0 complete after 146.505 msecs [ 758.890467] PM: resume of drv:drm dev:controlD64 complete after 116.257 msecs [ 758.900051] PM: resume of drv:usb dev:usb1 complete after 141.770 msecs [ 758.900081] PM: resume of drv:hub dev:1-0:1.0 complete after 141.723 msecs [ 758.900093] PM: resume of drv: dev:ep_00 complete after 139.113 msecs [ 758.900097] PM: resume of drv: dev:ep_81 complete after 139.148 msecs [ 759.000042] PM: resume of drv:usb dev:usb7 complete after 238.949 msecs [ 759.000075] PM: resume of drv:hub dev:7-0:1.0 complete after 238.973 msecs [ 759.000088] PM: resume of drv:usb dev:usb8 complete after 238.971 msecs [ 759.000092] PM: resume of drv: dev:ep_00 complete after 238.977 msecs [ 759.000104] PM: resume of drv:hub dev:8-0:1.0 complete after 238.978 msecs [ 759.000109] PM: resume of drv: dev:ep_81 complete after 239.000 msecs [ 759.000116] PM: resume of drv: dev:ep_00 complete after 238.982 msecs [ 759.000120] PM: resume of drv: dev:ep_81 complete after 238.987 msecs [ 759.020077] usb 1-3: reset high speed USB device using ehci_hcd and address 2 [ 759.040131] PM: resume of drv:usb dev:usb2 complete after 279.144 msecs [ 759.040155] PM: resume of drv:hub dev:2-0:1.0 complete after 279.162 msecs [ 759.040165] PM: resume of drv: dev:ep_00 complete after 279.163 msecs [ 759.040186] PM: resume of drv: dev:ep_81 complete after 279.189 msecs [ 759.120074] ata2: SATA link down (SStatus 0 SControl 300) [ 759.140070] ata5: SATA link down (SStatus 0 SControl 300) [ 759.160075] ata6: SATA link down (SStatus 0 SControl 300) [ 759.179703] PM: resume of drv:usb dev:1-3 complete after 418.529 msecs [ 759.179731] PM: resume of drv:uvcvideo dev:1-3:1.0 complete after 418.551 msecs [ 759.179736] PM: resume of drv: dev:ep_00 complete after 418.538 msecs [ 759.179742] PM: resume of drv:uvcvideo dev:1-3:1.1 complete after 418.554 msecs [ 759.179752] PM: resume of drv: dev:ep_81 complete after 418.568 msecs [ 759.290100] usb 8-2: reset full speed USB device using uhci_hcd and address 2 [ 759.449132] btusb 8-2:1.0: no reset_resume for driver btusb? [ 759.449136] btusb 8-2:1.1: no reset_resume for driver btusb? [ 759.610056] usb 7-1: reset full speed USB device using uhci_hcd and address 2 [ 759.690186] PM: resume of drv:usb dev:8-2 complete after 928.942 msecs [ 759.690207] PM: resume of drv:usb dev:8-2:1.0 complete after 928.959 msecs [ 759.690218] PM: resume of drv: dev:ep_00 complete after 928.921 msecs [ 759.690225] PM: resume of drv:usb dev:8-2:1.1 complete after 928.960 msecs [ 759.690235] PM: resume of drv: dev:ep_02 complete after 928.974 msecs [ 759.690239] PM: resume of drv:usb dev:8-2:1.2 complete after 928.960 msecs [ 759.690251] PM: resume of drv: dev:ep_03 complete after 928.976 msecs [ 759.690255] PM: resume of drv:usb dev:8-2:1.3 complete after 928.962 msecs [ 759.690267] PM: resume of drv: dev:ep_04 complete after 928.979 msecs [ 759.690271] PM: resume of drv: dev:ep_81 complete after 929.016 msecs [ 759.690283] PM: resume of drv: dev:ep_84 complete after 929.000 msecs [ 759.690287] PM: resume of drv: dev:ep_82 complete after 929.027 msecs [ 759.690299] PM: resume of drv: dev:ep_83 complete after 929.029 msecs [ 759.768101] PM: resume of drv:usb dev:7-1 complete after 1006.799 msecs [ 759.768129] PM: resume of drv: dev:ep_00 complete after 1006.797 msecs [ 759.768134] PM: resume of drv:usbhid dev:7-1:1.0 complete after 1006.823 msecs [ 759.768145] PM: resume of drv:usbhid dev:7-1:1.2 complete after 1006.821 msecs [ 759.768149] PM: resume of drv:usbhid dev:7-1:1.1 complete after 1006.833 msecs [ 759.768157] PM: resume of drv: dev:ep_83 complete after 1006.827 msecs [ 759.768160] PM: resume of drv: dev:ep_81 complete after 1006.847 msecs [ 759.768173] PM: resume of drv: dev:ep_82 complete after 1006.853 msecs [ 761.380071] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 761.399463] ata1.00: configured for UDMA/133 [ 761.422458] PM: resume of drv:sd dev:0:0:0:0 complete after 2661.256 msecs [ 761.422484] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2661.245 msecs [ 761.422488] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2531.931 msecs [ 761.448343] PM: resume of devices complete after 2704.463 msecs [ 761.460410] PM: resume devices took 2.720 seconds [ 761.460469] PM: Finishing wakeup. [ 761.460471] Restarting tasks ... done. [ 761.511594] video LNXVIDEO:01: Restoring backlight state [ 761.579401] [drm:i915_gem_do_execbuffer] *ERROR* Object ffff88013699ce00 [handle 667, index 1] appears more than once in object list [ 763.093764] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 763.103558] mount.crypt[4064]: segfault at 0 ip 0000000000406ede sp 00007fff80fd5000 error 4 in mount.crypt[400000+9000] [ 812.390140] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 812.399097] mount.crypt[4203]: segfault at 0 ip 0000000000406ede sp 00007fffeffc6df0 error 4 in mount.crypt[400000+9000] [ 813.968754] PM: Syncing filesystems ... done. [ 813.973147] PM: Preparing system for mem sleep [ 814.280466] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 814.300187] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 814.320111] PM: Entering mem sleep [ 814.320160] Suspending console(s) (use no_console_suspend to debug) [ 814.338673] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 814.338770] sd 0:0:0:0: [sda] Stopping disk [ 814.384789] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 814.384803] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 814.384816] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 814.384828] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 814.384866] ehci_hcd 0000:00:1a.7: PCI INT C disabled [ 814.384879] uhci_hcd 0000:00:1a.2: PCI INT C disabled [ 814.384892] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 814.384903] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 814.490088] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 814.510022] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 125.173 msecs [ 815.379333] PM: suspend of drv:sd dev:0:0:0:0 complete after 1040.667 msecs [ 815.379347] PM: suspend of drv:scsi dev:target0:0:0 complete after 1040.638 msecs [ 815.379363] PM: suspend of drv:scsi dev:host0 complete after 1040.554 msecs [ 815.390030] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 1005.277 msecs [ 815.390044] PM: suspend of drv: dev:pci0000:00 complete after 1004.600 msecs [ 815.390054] PM: suspend of devices complete after 1069.253 msecs [ 815.390058] PM: suspend devices took 1.070 seconds [ 815.390823] r8169 0000:04:00.0: PME# enabled [ 815.390833] r8169 0000:04:00.0: wake-up capability enabled by ACPI [ 815.470258] PM: late suspend of devices complete after 80.194 msecs [ 815.470886] ACPI: Preparing to enter system sleep state S3 [ 815.520794] PM: Saving platform NVS memory [ 815.521588] Disabling non-boot CPUs ... [ 815.660030] CPU 1 is now offline [ 815.660523] Extended CMOS year: 2000 [ 815.660523] Back to C! [ 815.660523] PM: Restoring platform NVS memory [ 815.660523] Extended CMOS year: 2000 [ 815.660523] Enabling non-boot CPUs ... [ 815.660523] Booting Node 0 Processor 1 APIC 0x1 [ 815.830027] Switched to NOHz mode on CPU #1 [ 815.830512] CPU1 is up [ 815.831704] ACPI: Waking up from system sleep state S3 [ 816.141813] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 816.141830] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 816.141868] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [ 816.141908] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 816.141951] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 816.141993] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 816.142043] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [ 816.142080] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x105) [ 816.142102] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 816.142110] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) [ 816.142145] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) [ 816.142158] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xf1f1f001) [ 816.142165] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xf7f0f600) [ 816.142171] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020) [ 816.142182] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 816.142190] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 816.142243] pcieport 0000:00:1c.3: restoring config space at offset 0xf (was 0x40400, writing 0x40405) [ 816.142256] pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xf5f1f201) [ 816.142264] pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030) [ 816.142275] pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 816.142283] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 816.142348] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 816.142391] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 816.142433] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 816.142482] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [ 816.142511] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff) [ 816.142524] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 816.142531] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 816.142537] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0) [ 816.142550] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 816.142629] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x205) [ 816.142653] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 816.142708] pci 0000:00:1f.3: restoring config space at offset 0x4 (was 0x4, writing 0xc0000004) [ 816.142758] ath9k 0000:02:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 816.142786] ath9k 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf6000004) [ 816.142793] ath9k 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 816.142803] ath9k 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 816.142937] r8169 0000:04:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x105) [ 816.142990] r8169 0000:04:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xf200000c) [ 816.143012] r8169 0000:04:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xf400000c) [ 816.143035] r8169 0000:04:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x3001) [ 816.143051] r8169 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 816.143073] r8169 0000:04:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 816.143846] PM: early resume of devices complete after 2.209 msecs [ 816.143949] i915 0000:00:02.0: setting latency timer to 64 [ 816.144151] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 816.144159] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 816.144190] usb usb3: root hub lost power or was reset [ 816.144214] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 816.144223] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 816.144257] usb usb4: root hub lost power or was reset [ 816.144278] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 816.144292] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 816.144320] usb usb5: root hub lost power or was reset [ 816.144337] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 816.144345] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 816.144403] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 816.144411] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 816.144463] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 816.144521] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 816.144529] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 816.144556] usb usb6: root hub lost power or was reset [ 816.144570] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 816.144578] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 816.144604] usb usb7: root hub lost power or was reset [ 816.144619] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 816.144626] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 816.144653] usb usb8: root hub lost power or was reset [ 816.144669] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 816.144676] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 816.144726] pci 0000:00:1e.0: setting latency timer to 64 [ 816.144748] ahci 0000:00:1f.2: setting latency timer to 64 [ 816.158450] sd 0:0:0:0: [sda] Starting disk [ 816.158702] r8169 0000:04:00.0: wake-up capability disabled by ACPI [ 816.158718] r8169 0000:04:00.0: PME# disabled [ 816.200096] r8169 0000:04:00.0: eth0: link down [ 816.280119] PM: resume of drv:usb dev:usb3 complete after 121.860 msecs [ 816.280146] PM: resume of drv:hub dev:3-0:1.0 complete after 121.879 msecs [ 816.280151] PM: resume of drv:usb dev:usb4 complete after 121.870 msecs [ 816.280159] PM: resume of drv: dev:ep_00 complete after 121.884 msecs [ 816.280167] PM: resume of drv: dev:ep_81 complete after 121.898 msecs [ 816.280178] PM: resume of drv:usb dev:usb5 complete after 121.877 msecs [ 816.280191] PM: resume of drv: dev:ep_00 complete after 121.894 msecs [ 816.280207] PM: resume of drv: dev:ep_00 complete after 121.889 msecs [ 816.280211] PM: resume of drv:usb dev:usb6 complete after 121.885 msecs [ 816.280223] PM: resume of drv:hub dev:5-0:1.0 complete after 121.914 msecs [ 816.280233] PM: resume of drv: dev:ep_81 complete after 121.920 msecs [ 816.280249] PM: resume of drv: dev:ep_00 complete after 121.908 msecs [ 816.280264] PM: resume of drv:hub dev:6-0:1.0 complete after 121.933 msecs [ 816.280271] PM: resume of drv:hub dev:4-0:1.0 complete after 121.983 msecs [ 816.280275] PM: resume of drv: dev:ep_81 complete after 121.938 msecs [ 816.280280] PM: resume of drv: dev:ep_81 complete after 121.989 msecs [ 816.290310] PM: resume of drv:i915 dev:0000:00:02.0 complete after 146.368 msecs [ 816.290325] PM: resume of drv:drm dev:controlD64 complete after 115.658 msecs [ 816.300097] PM: resume of drv:usb dev:usb1 complete after 141.916 msecs [ 816.300121] PM: resume of drv:hub dev:1-0:1.0 complete after 141.898 msecs [ 816.300134] PM: resume of drv: dev:ep_00 complete after 141.901 msecs [ 816.300171] PM: resume of drv: dev:ep_81 complete after 141.943 msecs [ 816.390100] PM: resume of drv:usb dev:usb8 complete after 231.730 msecs [ 816.390116] PM: resume of drv:usb dev:usb7 complete after 231.771 msecs [ 816.390125] PM: resume of drv:hub dev:8-0:1.0 complete after 231.748 msecs [ 816.390131] PM: resume of drv: dev:ep_00 complete after 231.766 msecs [ 816.390137] PM: resume of drv: dev:ep_00 complete after 231.751 msecs [ 816.390141] PM: resume of drv: dev:ep_81 complete after 231.760 msecs [ 816.390148] PM: resume of drv:hub dev:7-0:1.0 complete after 231.793 msecs [ 816.390169] PM: resume of drv: dev:ep_81 complete after 231.810 msecs [ 816.420076] usb 1-3: reset high speed USB device using ehci_hcd and address 2 [ 816.430071] PM: resume of drv:usb dev:usb2 complete after 271.834 msecs [ 816.430098] PM: resume of drv:hub dev:2-0:1.0 complete after 271.855 msecs [ 816.430109] PM: resume of drv: dev:ep_00 complete after 271.857 msecs [ 816.430113] PM: resume of drv: dev:ep_81 complete after 271.866 msecs [ 816.500104] ata6: SATA link down (SStatus 0 SControl 300) [ 816.510104] ata5: SATA link down (SStatus 0 SControl 300) [ 816.530106] ata2: SATA link down (SStatus 0 SControl 300) [ 816.579604] PM: resume of drv:usb dev:1-3 complete after 421.177 msecs [ 816.579631] PM: resume of drv:uvcvideo dev:1-3:1.0 complete after 421.198 msecs [ 816.579635] PM: resume of drv: dev:ep_00 complete after 421.185 msecs [ 816.579641] PM: resume of drv:uvcvideo dev:1-3:1.1 complete after 421.201 msecs [ 816.579652] PM: resume of drv: dev:ep_81 complete after 421.215 msecs [ 816.690094] usb 8-2: reset full speed USB device using uhci_hcd and address 2 [ 816.849381] btusb 8-2:1.0: no reset_resume for driver btusb? [ 816.849385] btusb 8-2:1.1: no reset_resume for driver btusb? [ 816.950070] usb 7-1: reset full speed USB device using uhci_hcd and address 2 [ 817.090190] PM: resume of drv:usb dev:8-2 complete after 931.693 msecs [ 817.090210] PM: resume of drv:usb dev:8-2:1.1 complete after 931.691 msecs [ 817.090221] PM: resume of drv:usb dev:8-2:1.3 complete after 931.676 msecs [ 817.090228] PM: resume of drv: dev:ep_83 complete after 931.706 msecs [ 817.090235] PM: resume of drv: dev:ep_03 complete after 931.708 msecs [ 817.090251] PM: resume of drv: dev:ep_00 complete after 931.702 msecs [ 817.090266] PM: resume of drv:usb dev:8-2:1.2 complete after 931.735 msecs [ 817.090277] PM: resume of drv: dev:ep_84 complete after 931.742 msecs [ 817.090292] PM: resume of drv: dev:ep_04 complete after 931.752 msecs [ 817.090307] PM: resume of drv:usb dev:8-2:1.0 complete after 931.807 msecs [ 817.090320] PM: resume of drv: dev:ep_82 complete after 931.812 msecs [ 817.090335] PM: resume of drv: dev:ep_02 complete after 931.822 msecs [ 817.090349] PM: resume of drv: dev:ep_81 complete after 931.845 msecs [ 817.108353] PM: resume of drv:usb dev:7-1 complete after 949.799 msecs [ 817.108371] PM: resume of drv:usbhid dev:7-1:1.1 complete after 949.804 msecs [ 817.108380] PM: resume of drv: dev:ep_00 complete after 949.683 msecs [ 817.108388] PM: resume of drv: dev:ep_82 complete after 949.817 msecs [ 817.108404] PM: resume of drv:usbhid dev:7-1:1.2 complete after 949.828 msecs [ 817.108414] PM: resume of drv: dev:ep_83 complete after 949.743 msecs [ 817.108428] PM: resume of drv:usbhid dev:7-1:1.0 complete after 949.870 msecs [ 817.108446] PM: resume of drv: dev:ep_81 complete after 949.884 msecs [ 819.010084] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 819.029472] ata1.00: configured for UDMA/133 [ 819.050410] PM: resume of drv:sd dev:0:0:0:0 complete after 2891.955 msecs [ 819.050436] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2891.943 msecs [ 819.050441] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2760.032 msecs [ 819.076318] PM: resume of devices complete after 2932.431 msecs [ 819.090415] PM: resume devices took 2.950 seconds [ 819.090475] PM: Finishing wakeup. [ 819.090477] Restarting tasks ... done. [ 819.110066] video LNXVIDEO:01: Restoring backlight state [ 819.228123] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 820.664968] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 820.704800] mount.crypt[4650]: segfault at 0 ip 0000000000406ede sp 00007fff43bfbdb0 error 4 in mount.crypt[400000+9000] [ 987.400077] usb 1-1: new high speed USB device using ehci_hcd and address 3 [ 987.596410] usbcore: registered new interface driver uas [ 987.621086] Initializing USB Mass Storage driver... [ 987.621329] scsi6 : usb-storage 1-1:1.0 [ 987.622329] usbcore: registered new interface driver usb-storage [ 987.622333] USB Mass Storage support registered. [ 988.621051] scsi 6:0:0:0: Direct-Access Nokia N900 031 PQ: 0 ANSI: 2 [ 988.621537] scsi 6:0:0:1: Direct-Access Nokia N900 031 PQ: 0 ANSI: 2 [ 988.622916] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 988.623329] sd 6:0:0:1: Attached scsi generic sg2 type 0 [ 988.634483] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 988.635099] sd 6:0:0:1: [sdc] Attached SCSI removable disk [ 1000.587788] usb 1-1: USB disconnect, address 3 [ 1001.220143] usb 1-1: new high speed USB device using ehci_hcd and address 4 [ 1001.468278] NET: Registered protocol family 35 [ 1001.489883] usbcore: registered new interface driver cdc_phonet [ 1001.516343] cdc_acm 1-1:1.6: This device cannot do calls on its own. It is not a modem. [ 1001.516491] cdc_acm 1-1:1.6: ttyACM0: USB ACM device [ 1001.517092] usbcore: registered new interface driver cdc_acm [ 1001.517096] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters [ 1001.596422] cdc_ether 1-1:1.8: usb0: register 'cdc_ether' at usb-0000:00:1a.7-1, CDC Ethernet Device, ea:de:fe:36:01:3f [ 1001.598364] usbcore: registered new interface driver cdc_ether [ 1011.910071] usb0: no IPv6 routers present [ 1174.404770] wlan0: deauthenticating from 00:26:f2:f7:cf:b2 by local choice (reason=3) [ 1174.468712] cfg80211: All devices are disconnected, going to restore regulatory settings [ 1174.468720] cfg80211: Restoring regulatory settings [ 1174.468738] cfg80211: Calling CRDA to update world regulatory domain [ 1174.502212] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 1174.502228] cfg80211: World regulatory domain updated: [ 1174.502232] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1174.502241] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1174.502248] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1174.502255] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1174.502262] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1174.502270] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1175.610871] gprs0: attached [ 1184.505984] connmand[2392]: segfault at 1bc ip 00007f1dc4830030 sp 00007fffb9b7de00 error 4 in connmand[7f1dc47fb000+75000] [ 1187.416888] wlan0: authenticate with 00:26:f2:f7:cf:b2 (try 1) [ 1187.419060] wlan0: authenticated [ 1187.436712] wlan0: associate with 00:26:f2:f7:cf:b2 (try 1) [ 1187.440237] wlan0: RX ReassocResp from 00:26:f2:f7:cf:b2 (capab=0x411 status=0 aid=4) [ 1187.440244] wlan0: associated