[   21.240340] composite sync not supported
[   21.663770] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[   23.140802] wlan0: authenticate with bc:05:43:5a:13:f3 (try 1)
[   23.142789] wlan0: authenticated
[   23.144733] wlan0: associate with bc:05:43:5a:13:f3 (try 1)
[   23.169611] wlan0: RX AssocResp from bc:05:43:5a:13:f3 (capab=0x431 status=0 aid=1)
[   23.169629] wlan0: associated
[   23.177129] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   24.019555] init: plymouth-stop pre-start process (1123) terminated with status 1
[   27.716397] CIFS VFS: default security mechanism requested.  The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3
[   31.773685] composite sync not supported
[   35.126851] composite sync not supported
[   38.835289] composite sync not supported
[   62.957238] composite sync not supported
[ 8597.811318] composite sync not supported
[12432.644502] wlan0: deauthenticating from bc:05:43:5a:13:f3 by local choice (reason=3)
[12432.692702] cfg80211: All devices are disconnected, going to restore regulatory settings
[12432.692718] cfg80211: Restoring regulatory settings
[12432.692734] cfg80211: Calling CRDA to update world regulatory domain
[12434.260237] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[12434.260248] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12434.260255] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[12434.260263] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12434.260269] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[12434.260277] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12434.260283] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[12434.260291] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12434.260297] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[12434.260305] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12434.260311] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[12434.260319] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12434.260325] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[12434.260333] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12434.260339] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[12434.260347] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12434.260353] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[12434.260360] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12434.260367] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[12434.260374] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12434.260381] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[12434.260388] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12434.260395] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[12434.260402] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[12434.260409] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[12434.260416] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[12434.260423] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[12434.260430] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[12434.260438] cfg80211: World regulatory domain updated:
[12434.260443] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[12434.260450] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12434.260457] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[12434.260464] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[12434.260471] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12434.260488] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12446.765907] PM: Syncing filesystems ... done.
[12446.777292] PM: Preparing system for mem sleep
[12447.296613] Freezing user space processes ... (elapsed 0.09 seconds) done.
[12447.392414] Freezing remaining freezable tasks ... (elapsed 1.20 seconds) done.
[12448.592454] PM: Entering mem sleep
[12448.592511] Suspending console(s) (use no_console_suspend to debug)
[12448.593086] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[12448.594018] sd 0:0:0:0: [sda] Stopping disk
[12448.620786] rt2800pci 0000:01:00.0: PCI INT A disabled
[12448.620804] ACPI handle has no context!
[12448.622468] i915 0000:00:02.0: PCI INT A disabled
[12448.656373] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[12448.656390] uhci_hcd 0000:00:1d.3: PCI INT D disabled
[12448.656440] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[12448.656476] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[12448.660060] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[12448.724306] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
[12448.740189] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 118.562 msecs
[12448.951181] PM: suspend of drv:sd dev:0:0:0:0 complete after 358.101 msecs
[12448.951326] PM: suspend of drv:scsi dev:target0:0:0 complete after 358.062 msecs
[12448.951412] PM: suspend of drv:scsi dev:host0 complete after 331.589 msecs
[12448.951672] ata_piix 0000:00:1f.2: PCI INT B disabled
[12448.964192] PM: suspend of drv:ata_piix dev:0000:00:1f.2 complete after 343.346 msecs
[12448.964303] PM: suspend of drv: dev:pci0000:00 complete after 341.681 msecs
[12448.964363] PM: suspend of devices complete after 371.648 msecs
[12448.964376] PM: suspend devices took 0.372 seconds
[12448.965220] ehci_hcd 0000:00:1d.7: PME# enabled
[12448.980557] PM: late suspend of devices complete after 16.168 msecs
[12448.980602] ACPI: Preparing to enter system sleep state S3
[12449.011167] PM: Saving platform NVS memory
[12449.012438] Disabling non-boot CPUs ...
[12449.116178] CPU 1 is now offline
[12449.117290] ACPI: Low-level resume complete
[12449.117290] PM: Restoring platform NVS memory
[12449.117290] Enabling non-boot CPUs ...
[12449.117290] Booting Node 0 Processor 1 APIC 0x1
[12449.117290] smpboot cpu 1: start_ip = 9b000
[12449.014154] Initializing CPU#1
[12449.014154] Calibrating delay loop (skipped) already calibrated this CPU
[12449.014154] Atom PSE erratum detected, BIOS microcode update recommended
[12449.014154] Disabled fast string operations
[12449.129460] NMI watchdog enabled, takes one hw-pmu counter.
[12449.132299] CPU1 is up
[12449.133016] ACPI: Waking up from system sleep state S3
[12449.188786] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[12449.188842] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x3fb13fa1)
[12449.188853] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0x3f903f80)
[12449.188863] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x2020)
[12449.188881] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100507)
[12449.188963] pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0xf0, writing 0x1010)
[12449.188981] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100106, writing 0x100507)
[12449.189061] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[12449.189106] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[12449.189151] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[12449.189196] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[12449.189251] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[12449.189278] ehci_hcd 0000:00:1d.7: PME# disabled
[12449.189455] rt2800pci 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
[12449.189488] rt2800pci 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xfbff0000)
[12449.189499] rt2800pci 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
[12449.189512] rt2800pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[12449.190086] PM: early resume of devices complete after 1.547 msecs
[12449.190276] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[12449.190289] i915 0000:00:02.0: setting latency timer to 64
[12449.190575] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[12449.190589] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[12449.190674] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[12449.190776] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[12449.190789] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[12449.190826] usb usb2: root hub lost power or was reset
[12449.190855] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[12449.190869] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[12449.190902] usb usb3: root hub lost power or was reset
[12449.190930] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[12449.190943] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[12449.190976] usb usb4: root hub lost power or was reset
[12449.191003] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[12449.191016] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[12449.191049] usb usb5: root hub lost power or was reset
[12449.191079] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[12449.191092] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[12449.191144] pci 0000:00:1e.0: setting latency timer to 64
[12449.191177] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[12449.191188] ata_piix 0000:00:1f.2: setting latency timer to 64
[12449.191235] rt2800pci 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[12449.197043] sd 0:0:0:0: [sda] Starting disk
[12449.316435] PM: resume of drv:hub dev:5-0:1.0 complete after 119.671 msecs
[12449.316446] PM: resume of drv:hub dev:3-0:1.0 complete after 119.922 msecs
[12449.316464] PM: resume of drv: dev:ep_00 complete after 119.551 msecs
[12449.316472] PM: resume of drv: dev:ep_00 complete after 119.930 msecs
[12449.316480] PM: resume of drv: dev:ep_81 complete after 119.728 msecs
[12449.316489] PM: resume of drv: dev:ep_81 complete after 119.988 msecs
[12449.316545] PM: resume of drv:hub dev:4-0:1.0 complete after 119.942 msecs
[12449.316571] PM: resume of drv:hub dev:2-0:1.0 complete after 120.192 msecs
[12449.316579] PM: resume of drv: dev:ep_00 complete after 119.890 msecs
[12449.316595] PM: resume of drv: dev:ep_81 complete after 120.204 msecs
[12449.316602] PM: resume of drv: dev:ep_81 complete after 119.953 msecs
[12449.316622] PM: resume of drv: dev:ep_00 complete after 120.192 msecs
[12449.320331] PM: resume of drv:hub dev:1-0:1.0 complete after 129.007 msecs
[12449.320382] PM: resume of drv: dev:ep_81 complete after 124.078 msecs
[12449.320398] PM: resume of drv: dev:ep_00 complete after 124.066 msecs
[12449.324596] PM: resume of drv:i915 dev:0000:00:02.0 complete after 134.339 msecs
[12449.432274] usb 1-8: reset high-speed USB device number 2 using ehci_hcd
[12449.477184] PM: resume of drv:battery dev:PNP0C0A:00 complete after 286.788 msecs
[12449.492405] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[12449.492426] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[12449.492816] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[12449.519939] ata1.00: configured for UDMA/133
[12449.576323] PM: resume of drv:sd dev:0:0:0:0 complete after 379.277 msecs
[12449.576391] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 379.093 msecs
[12449.808103] PM: resume of drv:uvcvideo dev:1-8:1.0 complete after 610.584 msecs
[12449.808121] PM: resume of drv:uvcvideo dev:1-8:1.1 complete after 610.389 msecs
[12449.808156] PM: resume of drv: dev:ep_00 complete after 610.325 msecs
[12449.808172] PM: resume of drv: dev:ep_83 complete after 610.545 msecs
[12449.808263] PM: resume of drv:video4linux dev:video0 complete after 231.441 msecs
[12449.808468] PM: resume of devices complete after 618.300 msecs
[12449.808690] PM: resume devices took 0.620 seconds
[12449.808756] PM: Finishing wakeup.
[12449.808761] Restarting tasks ... done.
[12449.826246] video LNXVIDEO:00: Restoring backlight state
[12451.050314] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[12451.173725] composite sync not supported
[12456.304862] phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware
[12456.329474] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[12458.493725] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[12460.274519] wlan0: authenticate with bc:05:43:5a:13:f3 (try 1)
[12460.276390] wlan0: authenticated
[12460.277964] wlan0: associate with bc:05:43:5a:13:f3 (try 1)
[12460.304111] wlan0: RX AssocResp from bc:05:43:5a:13:f3 (capab=0x431 status=0 aid=1)
[12460.304124] wlan0: associated
[12460.313049] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[12588.406458] composite sync not supported
[12588.436366] composite sync not supported
[12594.730004] composite sync not supported
[12596.674748] composite sync not supported
[12607.283582] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[12607.324247] composite sync not supported
[12637.205360] kbd_keycode: 27 callbacks suppressed
[12637.205370] keyboard: can't emulate rawmode for keycode 240
[12637.205434] keyboard: can't emulate rawmode for keycode 240
[13748.224364] composite sync not supported
[15043.510800] composite sync not supported
[20440.835646] composite sync not supported
[21465.170577] vlc[6431]: segfault at 14 ip b65452d3 sp b51fe830 error 4 in libqt4_plugin.so[b64f5000+216000]
[21686.176920] composite sync not supported
[22335.576632] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[22335.584227] SGI XFS Quota Management subsystem
[22335.742149] JFS: nTxBlock = 7930, nTxLock = 63442
[22335.943636] NTFS driver 2.1.30 [Flags: R/O MODULE].
[22336.272178] QNX4 filesystem 0.2.3 registered.
[22336.643567] Btrfs loaded
[27378.689690] composite sync not supported
[28025.250956] gtk-window-deco[2081]: segfault at 204 ip 080602a6 sp bff71290 error 4 in gtk-window-decorator[8048000+1d000]