[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-18-generic (buildd@crested) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu3) ) #29-Ubuntu SMP Fri Mar 9 21:36:08 UTC 2012 (Ubuntu 3.2.0-18.29-generic 3.2.9) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-18-generic root=UUID=22a76d8a-f001-4b66-9c2d-cb6ed8bb378d ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable) [ 0.000000] BIOS-e820: 00000000bfed0000 - 00000000bfee0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: Sony Corporation VGN-FZ31M/VAIO, BIOS R2110J7 12/21/2007 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 1 base 000000000 mask F00000000 write-back [ 0.000000] 2 base 100000000 mask FC0000000 write-back [ 0.000000] 3 base 0BFF00000 mask FFFF00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 3GB, range: 1GB, type UC [ 0.000000] reg 1, base: 0GB, range: 4GB, type WB [ 0.000000] reg 2, base: 4GB, range: 1GB, type WB [ 0.000000] reg 3, base: 3071MB, range: 1MB, type UC [ 0.000000] total RAM covered: 4095M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 4 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3071MB, range: 1MB, type UC [ 0.000000] reg 3, base: 4GB, range: 1GB, type WB [ 0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbfed0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000f8080] f8080 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bfed0000 [ 0.000000] 0000000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bfed0000 page 4k [ 0.000000] kernel direct mapping tables up to bfed0000 @ 1fffb000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000 [ 0.000000] 0100000000 - 0140000000 page 2M [ 0.000000] kernel direct mapping tables up to 140000000 @ bfeca000-bfed0000 [ 0.000000] RAMDISK: 358aa000 - 36c4d000 [ 0.000000] ACPI: RSDP 00000000000f8050 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT 00000000bfed7f39 00084 (v01 Sony VAIO 20071221 PTL 00000000) [ 0.000000] ACPI: FACP 00000000bfedfc04 000F4 (v03 Sony VAIO 20071221 PTL 00000001) [ 0.000000] ACPI: DSDT 00000000bfed9217 06979 (v02 Sony VAIO 20071221 PTL 20050624) [ 0.000000] ACPI: FACS 00000000bfee2fc0 00040 [ 0.000000] ACPI: APIC 00000000bfedfcf8 00068 (v01 Sony VAIO 20071221 PTL 0000005A) [ 0.000000] ACPI: HPET 00000000bfedfd60 00038 (v01 Sony VAIO 20071221 PTL 0000005A) [ 0.000000] ACPI: MCFG 00000000bfedfd98 0003C (v01 Sony VAIO 20071221 PTL 0000005A) [ 0.000000] ACPI: SLIC 00000000bfedfdd4 00176 (v01 Sony VAIO 20071221 PTL 01000000) [ 0.000000] ACPI: TMOR 00000000bfedff4a 00026 (v01 Sony VAIO 20071221 PTL 00000003) [ 0.000000] ACPI: APIC 00000000bfedff70 00068 (v01 Sony VAIO 20071221 PTL 00000000) [ 0.000000] ACPI: BOOT 00000000bfedffd8 00028 (v01 Sony VAIO 20071221 PTL 00000001) [ 0.000000] ACPI: SSDT 00000000bfed90fa 0011D (v01 Sony VAIO 20071221 PTL 20050624) [ 0.000000] ACPI: SSDT 00000000bfed85a5 00287 (v01 Sony VAIO 20071221 PTL 20050624) [ 0.000000] ACPI: SSDT 00000000bfed84f1 000B4 (v01 Sony VAIO 20071221 PTL 20050624) [ 0.000000] ACPI: SSDT 00000000bfed7fbd 00534 (v01 Sony VAIO 20071221 PTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000140000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff] [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bfed0 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 1048159 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3914 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 765712 pages, LIFO batch:31 [ 0.000000] Normal zone: 4096 pages used for memmap [ 0.000000] Normal zone: 258048 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000 [ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000 [ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bfed0000 - 00000000bfee0000 [ 0.000000] PM: Registered nosave memory: 00000000bfee0000 - 00000000bfee3000 [ 0.000000] PM: Registered nosave memory: 00000000bfee3000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000 [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed14000 [ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000 [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s83072 r8192 d23424 u1048576 [ 0.000000] pcpu-alloc: s83072 r8192 d23424 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027674 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-18-generic root=UUID=22a76d8a-f001-4b66-9c2d-cb6ed8bb378d ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 4024876k/5242880k available (6561k kernel code, 1050244k absent, 167760k reserved, 6643k data, 920k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:512 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1995.187 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.37 BogoMIPS (lpj=7980748) [ 0.004009] pid_max: default: 32768 minimum: 301 [ 0.004038] Security Framework initialized [ 0.004058] AppArmor: AppArmor initialized [ 0.004060] Yama: becoming mindful. [ 0.004520] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.006848] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.008877] Mount-cache hash table entries: 256 [ 0.009050] Initializing cgroup subsys cpuacct [ 0.009057] Initializing cgroup subsys memory [ 0.009067] Initializing cgroup subsys devices [ 0.009070] Initializing cgroup subsys freezer [ 0.009072] Initializing cgroup subsys blkio [ 0.009079] Initializing cgroup subsys perf_event [ 0.009117] CPU: Physical Processor ID: 0 [ 0.009118] CPU: Processor Core ID: 0 [ 0.009121] mce: CPU supports 6 MCE banks [ 0.009130] CPU0: Thermal monitoring enabled (TM2) [ 0.009135] using mwait in idle threads. [ 0.011768] ACPI: Core revision 20110623 [ 0.016038] ftrace: allocating 27033 entries in 107 pages [ 0.020489] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.062360] CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d [ 0.064003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.064003] PEBS disabled due to CPU errata. [ 0.064003] ... version: 2 [ 0.064003] ... bit width: 40 [ 0.064003] ... generic registers: 2 [ 0.064003] ... value mask: 000000ffffffffff [ 0.064003] ... max period: 000000007fffffff [ 0.064003] ... fixed-purpose events: 3 [ 0.064003] ... event mask: 0000000700000003 [ 0.064003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.064003] Booting Node 0, Processors #1 Ok. [ 0.064003] smpboot cpu 1: start_ip = 9a000 [ 0.152043] NMI watchdog enabled, takes one hw-pmu counter. [ 0.152091] Brought up 2 CPUs [ 0.152093] Total of 2 processors activated (7980.35 BogoMIPS). [ 0.153483] devtmpfs: initialized [ 0.153483] EVM: security.selinux [ 0.153483] EVM: security.SMACK64 [ 0.153483] EVM: security.capability [ 0.153483] PM: Registering ACPI NVS region at bfee0000 (12288 bytes) [ 0.153483] print_constraints: dummy: [ 0.153483] RTC time: 19:10:38, date: 03/14/12 [ 0.156044] NET: Registered protocol family 16 [ 0.156137] Trying to unpack rootfs image as initramfs... [ 0.156208] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.156212] ACPI: bus type pci registered [ 0.156284] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.156288] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.212745] PCI: Using configuration type 1 for base access [ 0.216273] bio: create slab at 0 [ 0.216273] ACPI: Added _OSI(Module Device) [ 0.216273] ACPI: Added _OSI(Processor Device) [ 0.216275] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.216277] ACPI: Added _OSI(Processor Aggregator Device) [ 0.217779] ACPI: EC: Look up EC in DSDT [ 0.220446] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.221622] ACPI: SSDT 00000000bfed8d75 002A1 (v01 Sony VAIO 20071221 PTL 20050624) [ 0.221993] ACPI: Dynamic OEM Table Load: [ 0.221997] ACPI: SSDT (null) 002A1 (v01 Sony VAIO 20071221 PTL 20050624) [ 0.222109] ACPI: SSDT 00000000bfed882c 004B7 (v01 Sony VAIO 20071221 PTL 20050624) [ 0.222454] ACPI: Dynamic OEM Table Load: [ 0.222458] ACPI: SSDT (null) 004B7 (v01 Sony VAIO 20071221 PTL 20050624) [ 0.222722] ACPI: SSDT 00000000bfed9016 000E4 (v01 Sony VAIO 20071221 PTL 20050624) [ 0.223078] ACPI: Dynamic OEM Table Load: [ 0.223082] ACPI: SSDT (null) 000E4 (v01 Sony VAIO 20071221 PTL 20050624) [ 0.223165] ACPI: SSDT 00000000bfed8ce3 00092 (v01 Sony VAIO 20071221 PTL 20050624) [ 0.223511] ACPI: Dynamic OEM Table Load: [ 0.223515] ACPI: SSDT (null) 00092 (v01 Sony VAIO 20071221 PTL 20050624) [ 0.592913] Freeing initrd memory: 20108k freed [ 0.924136] ACPI: Interpreter enabled [ 0.924145] ACPI: (supports S0 S3 S4 S5) [ 0.924170] ACPI: Using IOAPIC for interrupt routing [ 0.940658] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.945829] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.946004] ACPI: No dock devices found. [ 0.946006] HEST: Table not found. [ 0.946010] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.946438] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.947051] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.947055] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.947058] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.947061] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored) [ 0.947064] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) [ 0.947067] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) [ 0.947071] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] (ignored) [ 0.947074] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored) [ 0.947087] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600 [ 0.947143] pci 0000:00:01.0: [8086:2a01] type 1 class 0x000604 [ 0.947193] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.947197] pci 0000:00:01.0: PME# disabled [ 0.947254] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03 [ 0.947314] pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f] [ 0.947360] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03 [ 0.947419] pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f] [ 0.947484] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03 [ 0.947510] pci 0000:00:1a.7: reg 10: [mem 0xfc404800-0xfc404bff] [ 0.947623] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.947629] pci 0000:00:1a.7: PME# disabled [ 0.947663] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403 [ 0.947687] pci 0000:00:1b.0: reg 10: [mem 0xfc400000-0xfc403fff 64bit] [ 0.947797] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.947803] pci 0000:00:1b.0: PME# disabled [ 0.947836] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604 [ 0.947952] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.947958] pci 0000:00:1c.0: PME# disabled [ 0.947993] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604 [ 0.948119] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.948124] pci 0000:00:1c.1: PME# disabled [ 0.948160] pci 0000:00:1c.2: [8086:2843] type 1 class 0x000604 [ 0.948277] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.948283] pci 0000:00:1c.2: PME# disabled [ 0.948320] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604 [ 0.948437] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.948443] pci 0000:00:1c.4: PME# disabled [ 0.948478] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03 [ 0.948537] pci 0000:00:1d.0: reg 20: [io 0x1840-0x185f] [ 0.948583] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03 [ 0.948643] pci 0000:00:1d.1: reg 20: [io 0x1860-0x187f] [ 0.948692] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03 [ 0.948752] pci 0000:00:1d.2: reg 20: [io 0x1880-0x189f] [ 0.948813] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03 [ 0.948839] pci 0000:00:1d.7: reg 10: [mem 0xfc404c00-0xfc404fff] [ 0.948952] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.948958] pci 0000:00:1d.7: PME# disabled [ 0.948985] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.949089] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601 [ 0.949208] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.949215] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO [ 0.949284] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101 [ 0.949302] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.949315] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.949328] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 0.949341] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 0.949354] pci 0000:00:1f.1: reg 20: [io 0x18a0-0x18af] [ 0.949412] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106 [ 0.949441] pci 0000:00:1f.2: reg 10: [io 0x18d8-0x18df] [ 0.949454] pci 0000:00:1f.2: reg 14: [io 0x18cc-0x18cf] [ 0.949467] pci 0000:00:1f.2: reg 18: [io 0x18d0-0x18d7] [ 0.949480] pci 0000:00:1f.2: reg 1c: [io 0x18c8-0x18cb] [ 0.949493] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff] [ 0.949506] pci 0000:00:1f.2: reg 24: [mem 0xfc404000-0xfc4047ff] [ 0.949577] pci 0000:00:1f.2: PME# supported from D3hot [ 0.949582] pci 0000:00:1f.2: PME# disabled [ 0.949607] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05 [ 0.949624] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff] [ 0.949669] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f] [ 0.949767] pci 0000:01:00.0: [10de:0426] type 0 class 0x000300 [ 0.949787] pci 0000:01:00.0: reg 10: [mem 0xce000000-0xceffffff] [ 0.949809] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.949831] pci 0000:01:00.0: reg 1c: [mem 0xcc000000-0xcdffffff 64bit] [ 0.949846] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f] [ 0.949861] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.949969] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.949973] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.949977] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff] [ 0.949982] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.950047] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 0.950053] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.950058] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff] [ 0.950067] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.950133] pci 0000:00:1c.1: PCI bridge to [bus 04-05] [ 0.950138] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] [ 0.950144] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf9ffffff] [ 0.950153] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref] [ 0.950286] pci 0000:06:00.0: [8086:4229] type 0 class 0x000280 [ 0.950333] pci 0000:06:00.0: reg 10: [mem 0xfa000000-0xfa001fff 64bit] [ 0.950553] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.950566] pci 0000:06:00.0: PME# disabled [ 0.956106] pci 0000:00:1c.2: PCI bridge to [bus 06-07] [ 0.956112] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff] [ 0.956117] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfbffffff] [ 0.956126] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref] [ 0.956225] pci 0000:08:00.0: [11ab:4351] type 0 class 0x000200 [ 0.956258] pci 0000:08:00.0: reg 10: [mem 0xfc000000-0xfc003fff 64bit] [ 0.956276] pci 0000:08:00.0: reg 18: [io 0x6000-0x60ff] [ 0.956438] pci 0000:08:00.0: supports D1 D2 [ 0.956440] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.956447] pci 0000:08:00.0: PME# disabled [ 0.956466] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.956480] pci 0000:00:1c.4: PCI bridge to [bus 08-08] [ 0.956485] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff] [ 0.956491] pci 0000:00:1c.4: bridge window [mem 0xfc000000-0xfc0fffff] [ 0.956555] pci 0000:09:03.0: [104c:8039] type 2 class 0x000607 [ 0.956582] pci 0000:09:03.0: reg 10: [mem 0xfc100000-0xfc100fff] [ 0.956627] pci 0000:09:03.0: supports D1 D2 [ 0.956630] pci 0000:09:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.956636] pci 0000:09:03.0: PME# disabled [ 0.956663] pci 0000:09:03.1: [104c:803a] type 0 class 0x000c00 [ 0.956691] pci 0000:09:03.1: reg 10: [mem 0xfc102000-0xfc1027ff] [ 0.956707] pci 0000:09:03.1: reg 14: [mem 0xfc104000-0xfc107fff] [ 0.956818] pci 0000:09:03.1: supports D1 D2 [ 0.956821] pci 0000:09:03.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.956827] pci 0000:09:03.1: PME# disabled [ 0.956853] pci 0000:09:03.2: [104c:803b] type 0 class 0x000180 [ 0.956881] pci 0000:09:03.2: reg 10: [mem 0xfc101000-0xfc101fff] [ 0.956996] pci 0000:09:03.2: supports D1 D2 [ 0.956998] pci 0000:09:03.2: PME# supported from D0 D1 D2 D3hot [ 0.957004] pci 0000:09:03.2: PME# disabled [ 0.957078] pci 0000:00:1e.0: PCI bridge to [bus 09-0a] (subtractive decode) [ 0.957087] pci 0000:00:1e.0: bridge window [mem 0xfc100000-0xfc1fffff] [ 0.957096] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.957099] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) [ 0.957155] pci_bus 0000:0a: [bus 0a-0d] partially hidden behind transparent bridge 0000:09 [bus 09-0a] [ 0.957196] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.957325] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 0.957459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.957542] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.957622] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.957704] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.957937] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.958179] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.958287] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x00 [ 0.958290] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.969726] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 0.969782] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.969834] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15) [ 0.969886] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.969937] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.969988] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.970038] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.970089] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.970216] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.970216] vgaarb: loaded [ 0.970216] vgaarb: bridge control possible 0000:01:00.0 [ 0.970216] i2c-core: driver [aat2870] using legacy suspend method [ 0.970216] i2c-core: driver [aat2870] using legacy resume method [ 0.970216] SCSI subsystem initialized [ 0.970216] libata version 3.00 loaded. [ 0.970216] usbcore: registered new interface driver usbfs [ 0.970216] usbcore: registered new interface driver hub [ 0.970216] usbcore: registered new device driver usb [ 0.970216] PCI: Using ACPI for IRQ routing [ 0.981959] PCI: pci_cache_line_size set to 64 bytes [ 0.982128] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.982131] reserve RAM buffer: 00000000bfed0000 - 00000000bfffffff [ 0.982258] NetLabel: Initializing [ 0.982260] NetLabel: domain hash size = 128 [ 0.982262] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.982280] NetLabel: unlabeled traffic allowed by default [ 0.982377] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.982377] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.982377] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.988151] Switching to clocksource hpet [ 0.997201] AppArmor: AppArmor Filesystem Enabled [ 0.997244] pnp: PnP ACPI init [ 0.997267] ACPI: bus type pnp registered [ 1.004958] pnp 00:00: [bus 00-ff] [ 1.004962] pnp 00:00: [io 0x0000-0x0cf7 window] [ 1.004965] pnp 00:00: [io 0x0cf8-0x0cff] [ 1.004967] pnp 00:00: [io 0x0d00-0xffff window] [ 1.004970] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 1.004973] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 1.004975] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 1.004978] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 1.004980] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 1.004983] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 1.004985] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 1.004987] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 1.004990] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 1.004992] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 1.004995] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 1.004997] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 1.005000] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 1.005002] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 1.005009] pnp 00:00: [mem 0xc0000000-0xdfffffff window] [ 1.005012] pnp 00:00: [mem 0xf0000000-0xfebfffff window] [ 1.005014] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 1.005099] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 1.005181] pnp 00:01: [mem 0xfed1c000-0xfed1ffff] [ 1.005183] pnp 00:01: [mem 0xfed14000-0xfed17fff] [ 1.005186] pnp 00:01: [mem 0xfed18000-0xfed18fff] [ 1.005188] pnp 00:01: [mem 0xfed19000-0xfed19fff] [ 1.005190] pnp 00:01: [mem 0xe0000000-0xefffffff] [ 1.005193] pnp 00:01: [mem 0xfed20000-0xfed3ffff] [ 1.005195] pnp 00:01: [mem 0xfed40000-0xfed44fff] [ 1.005197] pnp 00:01: [mem 0xfed45000-0xfed8ffff] [ 1.005279] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.005283] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved [ 1.005286] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.005289] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.005292] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 1.005295] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.005298] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved [ 1.005301] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved [ 1.005305] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.005505] pnp 00:02: [io 0x0000-0x001f] [ 1.005507] pnp 00:02: [io 0x0081-0x0091] [ 1.005510] pnp 00:02: [io 0x0093-0x009f] [ 1.005512] pnp 00:02: [io 0x00c0-0x00df] [ 1.005514] pnp 00:02: [dma 4] [ 1.005560] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.005570] pnp 00:03: [mem 0xff000000-0xffffffff] [ 1.005617] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active) [ 1.005687] pnp 00:04: [mem 0xfed00000-0xfed003ff] [ 1.005758] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved [ 1.005763] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 1.005775] pnp 00:05: [io 0x00f0] [ 1.005788] pnp 00:05: [irq 13] [ 1.005835] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 1.005847] pnp 00:06: [io 0x002e-0x002f] [ 1.005850] pnp 00:06: [io 0x004e-0x004f] [ 1.005852] pnp 00:06: [io 0x0061] [ 1.005854] pnp 00:06: [io 0x0063] [ 1.005856] pnp 00:06: [io 0x0065] [ 1.005858] pnp 00:06: [io 0x0067] [ 1.005860] pnp 00:06: [io 0x0080] [ 1.005862] pnp 00:06: [io 0x0092] [ 1.005864] pnp 00:06: [io 0x00b2-0x00b3] [ 1.005866] pnp 00:06: [io 0x0680-0x069f] [ 1.005868] pnp 00:06: [io 0x0800-0x080f] [ 1.005870] pnp 00:06: [io 0x1000-0x107f] [ 1.005872] pnp 00:06: [io 0x1180-0x11bf] [ 1.005874] pnp 00:06: [io 0x1640-0x164f] [ 1.005876] pnp 00:06: [io 0xfe00-0xfe7f] [ 1.005878] pnp 00:06: [io 0xfe80-0xfeff] [ 1.005968] system 00:06: [io 0x0680-0x069f] has been reserved [ 1.005972] system 00:06: [io 0x0800-0x080f] has been reserved [ 1.005975] system 00:06: [io 0x1000-0x107f] has been reserved [ 1.005978] system 00:06: [io 0x1180-0x11bf] has been reserved [ 1.005980] system 00:06: [io 0x1640-0x164f] has been reserved [ 1.005983] system 00:06: [io 0xfe00-0xfe7f] has been reserved [ 1.005986] system 00:06: [io 0xfe80-0xfeff] has been reserved [ 1.005990] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.006001] pnp 00:07: [io 0x0070-0x0077] [ 1.006007] pnp 00:07: [irq 8] [ 1.006056] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.006072] pnp 00:08: [io 0x0060] [ 1.006074] pnp 00:08: [io 0x0064] [ 1.006080] pnp 00:08: [irq 1] [ 1.006130] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.006144] pnp 00:09: [irq 12] [ 1.006191] pnp 00:09: Plug and Play ACPI device, IDs SNY9001 PNP0f13 (active) [ 1.006211] pnp: PnP ACPI: found 10 devices [ 1.006213] ACPI: ACPI bus type pnp unregistered [ 1.013698] PCI: max bus depth: 2 pci_try_num: 3 [ 1.013768] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0000000-0xc00000ff] [ 1.013775] pci 0000:00:1f.3: BAR 0: set to [mem 0xc0000000-0xc00000ff] (PCI address [0xc0000000-0xc00000ff]) [ 1.013780] pci 0000:00:1e.0: BAR 15: assigned [mem 0xc4000000-0xc7ffffff pref] [ 1.013784] pci 0000:00:1e.0: BAR 13: assigned [io 0x7000-0x7fff] [ 1.013788] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0100000-0xc02fffff 64bit pref] [ 1.013792] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000) [ 1.013796] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 1.013799] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 1.013803] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff] [ 1.013807] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.013813] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 1.013816] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 1.013823] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff] [ 1.013829] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref] [ 1.013837] pci 0000:00:1c.1: PCI bridge to [bus 04-05] [ 1.013841] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] [ 1.013848] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf9ffffff] [ 1.013854] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref] [ 1.013863] pci 0000:00:1c.2: PCI bridge to [bus 06-07] [ 1.013867] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff] [ 1.013874] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfbffffff] [ 1.013879] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref] [ 1.013888] pci 0000:00:1c.4: PCI bridge to [bus 08-08] [ 1.013892] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff] [ 1.013899] pci 0000:00:1c.4: bridge window [mem 0xfc000000-0xfc0fffff] [ 1.013905] pci 0000:00:1c.4: bridge window [mem 0xc0100000-0xc02fffff 64bit pref] [ 1.013916] pci 0000:09:03.0: BAR 16: assigned [mem 0xc8000000-0xcbffffff] [ 1.013919] pci 0000:09:03.0: BAR 15: assigned [mem 0xc4000000-0xc7ffffff pref] [ 1.013922] pci 0000:09:03.0: BAR 14: assigned [io 0x7000-0x70ff] [ 1.013925] pci 0000:09:03.0: BAR 13: assigned [io 0x7400-0x74ff] [ 1.013928] pci 0000:09:03.0: CardBus bridge to [bus 0a-0d] [ 1.013931] pci 0000:09:03.0: bridge window [io 0x7400-0x74ff] [ 1.013937] pci 0000:09:03.0: bridge window [io 0x7000-0x70ff] [ 1.013943] pci 0000:09:03.0: bridge window [mem 0xc4000000-0xc7ffffff pref] [ 1.013949] pci 0000:09:03.0: bridge window [mem 0xc8000000-0xcbffffff] [ 1.013955] pci 0000:00:1e.0: PCI bridge to [bus 09-0a] [ 1.013959] pci 0000:00:1e.0: bridge window [io 0x7000-0x7fff] [ 1.013966] pci 0000:00:1e.0: bridge window [mem 0xfc100000-0xfc1fffff] [ 1.013971] pci 0000:00:1e.0: bridge window [mem 0xc4000000-0xc7ffffff pref] [ 1.013993] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.013997] pci 0000:00:01.0: setting latency timer to 64 [ 1.014010] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.014015] pci 0000:00:1c.0: setting latency timer to 64 [ 1.014024] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 1.014029] pci 0000:00:1c.1: setting latency timer to 64 [ 1.014041] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.014047] pci 0000:00:1c.2: setting latency timer to 64 [ 1.014055] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.014061] pci 0000:00:1c.4: setting latency timer to 64 [ 1.014070] pci 0000:00:1e.0: setting latency timer to 64 [ 1.014081] pci 0000:09:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.014088] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 1.014091] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff] [ 1.014094] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 1.014097] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xceffffff] [ 1.014101] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.014105] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 1.014108] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff] [ 1.014112] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref] [ 1.014115] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] [ 1.014119] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff] [ 1.014122] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref] [ 1.014126] pci_bus 0000:06: resource 0 [io 0x5000-0x5fff] [ 1.014130] pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfbffffff] [ 1.014133] pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref] [ 1.014137] pci_bus 0000:08: resource 0 [io 0x6000-0x6fff] [ 1.014140] pci_bus 0000:08: resource 1 [mem 0xfc000000-0xfc0fffff] [ 1.014144] pci_bus 0000:08: resource 2 [mem 0xc0100000-0xc02fffff 64bit pref] [ 1.014148] pci_bus 0000:09: resource 0 [io 0x7000-0x7fff] [ 1.014151] pci_bus 0000:09: resource 1 [mem 0xfc100000-0xfc1fffff] [ 1.014154] pci_bus 0000:09: resource 2 [mem 0xc4000000-0xc7ffffff pref] [ 1.014158] pci_bus 0000:09: resource 4 [io 0x0000-0xffff] [ 1.014161] pci_bus 0000:09: resource 5 [mem 0x00000000-0xfffffffff] [ 1.014165] pci_bus 0000:0a: resource 0 [io 0x7400-0x74ff] [ 1.014167] pci_bus 0000:0a: resource 1 [io 0x7000-0x70ff] [ 1.014170] pci_bus 0000:0a: resource 2 [mem 0xc4000000-0xc7ffffff pref] [ 1.014173] pci_bus 0000:0a: resource 3 [mem 0xc8000000-0xcbffffff] [ 1.014219] NET: Registered protocol family 2 [ 1.014396] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.015798] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.020033] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.020562] TCP: Hash tables configured (established 524288 bind 65536) [ 1.020565] TCP reno registered [ 1.020576] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 1.020624] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 1.020771] NET: Registered protocol family 1 [ 1.020805] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.020828] pci 0000:00:1a.0: PCI INT A disabled [ 1.020849] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.020870] pci 0000:00:1a.1: PCI INT B disabled [ 1.020881] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.020919] pci 0000:00:1a.7: PCI INT C disabled [ 1.020948] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.020969] pci 0000:00:1d.0: PCI INT A disabled [ 1.020981] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.021002] pci 0000:00:1d.1: PCI INT B disabled [ 1.021011] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.021032] pci 0000:00:1d.2: PCI INT C disabled [ 1.021043] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.021075] pci 0000:00:1d.7: PCI INT A disabled [ 1.021114] pci 0000:01:00.0: Boot video device [ 1.021157] PCI: CLS 64 bytes, default 64 [ 1.021160] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.021163] Placing 64MB software IO TLB between ffff8800bbeca000 - ffff8800bfeca000 [ 1.021166] software IO TLB at phys 0xbbeca000 - 0xbfeca000 [ 1.021179] Simple Boot Flag at 0x36 set to 0x1 [ 1.021610] audit: initializing netlink socket (disabled) [ 1.021622] type=2000 audit(1331752239.016:1): initialized [ 1.058945] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.086886] VFS: Disk quotas dquot_6.5.2 [ 1.086958] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.087580] fuse init (API version 7.17) [ 1.087697] msgmni has been set to 7900 [ 1.088153] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.088187] io scheduler noop registered [ 1.088190] io scheduler deadline registered [ 1.088231] io scheduler cfq registered (default) [ 1.088363] pcieport 0000:00:01.0: setting latency timer to 64 [ 1.088402] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 1.088459] pcieport 0000:00:1c.0: setting latency timer to 64 [ 1.088519] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 1.088611] pcieport 0000:00:1c.1: setting latency timer to 64 [ 1.088669] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X [ 1.088757] pcieport 0000:00:1c.2: setting latency timer to 64 [ 1.088815] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X [ 1.088899] pcieport 0000:00:1c.4: setting latency timer to 64 [ 1.088957] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X [ 1.089065] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.089095] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.089161] intel_idle: MWAIT substates: 0x22220 [ 1.089163] intel_idle: does not run on family 6 model 15 [ 1.089741] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.090462] ACPI: AC Adapter [ADP1] (on-line) [ 1.090582] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 1.091257] ACPI: Lid Switch [LID0] [ 1.091341] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.091347] ACPI: Power Button [PWRB] [ 1.095476] Monitor-Mwait will be used to enter C-1 state [ 1.095511] Monitor-Mwait will be used to enter C-2 state [ 1.095546] Monitor-Mwait will be used to enter C-3 state [ 1.095554] Marking TSC unstable due to TSC halts in idle [ 1.095570] ACPI: acpi_idle registered with cpuidle [ 1.107227] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.107230] ACPI: Thermal Zone [TZ00] (54 C) [ 1.108065] ACPI: Invalid active0 threshold [ 1.108708] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.108711] ACPI: Thermal Zone [TZ01] (54 C) [ 1.108763] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.108775] ACPI: Battery Slot [BAT0] (battery absent) [ 1.108812] ERST: Table is not found! [ 1.108814] GHES: HEST is not enabled! [ 1.108911] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.116576] ACPI: Battery Slot [BAT0] (battery absent) [ 1.208431] Linux agpgart interface v0.103 [ 1.210294] brd: module loaded [ 1.211193] loop: module loaded [ 1.211364] ahci 0000:00:1f.2: version 3.0 [ 1.211379] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.211440] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X [ 1.211500] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode [ 1.211504] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc [ 1.211510] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.211937] scsi0 : ahci [ 1.212056] scsi1 : ahci [ 1.212141] scsi2 : ahci [ 1.212231] ata1: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404100 irq 45 [ 1.212234] ata2: DUMMY [ 1.212236] ata3: DUMMY [ 1.212300] ata_piix 0000:00:1f.1: version 2.13 [ 1.212309] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.212347] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.212719] scsi3 : ata_piix [ 1.212804] scsi4 : ata_piix [ 1.213236] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14 [ 1.213240] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15 [ 1.213630] Fixed MDIO Bus: probed [ 1.213654] tun: Universal TUN/TAP device driver, 1.6 [ 1.213656] tun: (C) 1999-2004 Max Krasnyansky [ 1.213727] PPP generic driver version 2.4.2 [ 1.213967] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.213987] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.214006] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.214011] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.214063] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.214103] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.218003] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 1.218023] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc404800 [ 1.232020] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.232183] hub 1-0:1.0: USB hub found [ 1.232188] hub 1-0:1.0: 4 ports detected [ 1.232277] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.232291] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.232295] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.232344] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.232377] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.236252] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 1.236267] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc404c00 [ 1.252020] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.252149] hub 2-0:1.0: USB hub found [ 1.252153] hub 2-0:1.0: 6 ports detected [ 1.252246] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.252261] uhci_hcd: USB Universal Host Controller Interface driver [ 1.252282] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.252292] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.252296] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.252350] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.252391] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 [ 1.252542] hub 3-0:1.0: USB hub found [ 1.252547] hub 3-0:1.0: 2 ports detected [ 1.252626] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.252635] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.252639] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.252698] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.252736] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 [ 1.252887] hub 4-0:1.0: USB hub found [ 1.252892] hub 4-0:1.0: 2 ports detected [ 1.252969] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.252978] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.252982] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.253032] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 1.253061] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840 [ 1.253206] hub 5-0:1.0: USB hub found [ 1.253211] hub 5-0:1.0: 2 ports detected [ 1.253288] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.253297] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.253300] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.253358] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 1.253399] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860 [ 1.253543] hub 6-0:1.0: USB hub found [ 1.253548] hub 6-0:1.0: 2 ports detected [ 1.253624] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.253633] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.253637] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.253687] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 1.253717] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880 [ 1.253861] hub 7-0:1.0: USB hub found [ 1.253866] hub 7-0:1.0: 2 ports detected [ 1.253997] usbcore: registered new interface driver libusual [ 1.254043] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.258610] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.258617] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.258774] mousedev: PS/2 mouse device common for all mice [ 1.259155] rtc_cmos 00:07: RTC can wake from S4 [ 1.259301] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.259335] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.259429] device-mapper: uevent: version 1.0.3 [ 1.259530] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 1.259612] cpuidle: using governor ladder [ 1.259731] cpuidle: using governor menu [ 1.259734] EFI Variables Facility v0.08 2004-May-17 [ 1.260014] TCP cubic registered [ 1.260156] NET: Registered protocol family 10 [ 1.260706] NET: Registered protocol family 17 [ 1.260724] Registering the dns_resolver key type [ 1.260937] PM: Hibernation image not present or could not be loaded. [ 1.260955] registered taskstats version 1 [ 1.274290] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.282242] Magic number: 4:664:192 [ 1.282327] acpi device:1e: hash matches [ 1.282383] rtc_cmos 00:07: setting system clock to 2012-03-14 19:10:39 UTC (1331752239) [ 1.282943] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.282946] EDD information not available. [ 1.379832] ata4.00: ATAPI: Optiarc BD ROM BC-5500A, 1.79, max UDMA/33 [ 1.392357] ata4.00: configured for UDMA/33 [ 1.532069] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.534011] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded [ 1.534015] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.535839] ata1.00: ATA-8: ST9500420AS, 0002SDM1, max UDMA/133 [ 1.535842] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.538096] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded [ 1.538100] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.539897] ata1.00: configured for UDMA/133 [ 1.540071] scsi 0:0:0:0: Direct-Access ATA ST9500420AS 0002 PQ: 0 ANSI: 5 [ 1.540237] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.540254] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.540291] sd 0:0:0:0: [sda] Write Protect is off [ 1.540295] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.540330] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.541357] scsi 3:0:0:0: CD-ROM Optiarc BD ROM BC-5500A 1.79 PQ: 0 ANSI: 5 [ 1.542845] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.542848] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.542995] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 1.543132] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 1.544062] usb 1-2: new high-speed USB device number 2 using ehci_hcd [ 1.636164] sda: sda1 sda2 sda4 < sda5 sda6 sda7 sda8 sda9 > [ 1.637072] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.638787] Freeing unused kernel memory: 920k freed [ 1.639095] Write protecting the kernel read-only data: 12288k [ 1.644871] Freeing unused kernel memory: 1612k freed [ 1.649706] Freeing unused kernel memory: 1200k freed [ 1.670363] udevd[102]: starting version 175 [ 1.731391] sky2: driver version 1.30 [ 1.731927] sky2 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.731946] sky2 0000:08:00.0: setting latency timer to 64 [ 1.731989] sky2 0000:08:00.0: Yukon-2 FE chip revision 1 [ 1.732197] sky2 0000:08:00.0: irq 46 for MSI/MSI-X [ 1.733175] sky2 0000:08:00.0: eth0: addr 00:1a:80:a1:88:86 [ 1.767411] firewire_ohci 0000:09:03.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.796070] usb 2-3: new high-speed USB device number 2 using ehci_hcd [ 1.820146] firewire_ohci: Added fw-ohci device 0000:09:03.1, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [ 1.930008] hub 2-3:1.0: USB hub found [ 1.930334] hub 2-3:1.0: 4 ports detected [ 2.200351] usb 2-3.1: new high-speed USB device number 4 using ehci_hcd [ 2.292760] hub 2-3.1:1.0: USB hub found [ 2.292838] hub 2-3.1:1.0: 4 ports detected [ 2.320175] firewire_core: created device fw0: GUID 08004603029b64c3, S400 [ 2.532035] usb 7-1: new full-speed USB device number 2 using uhci_hcd [ 2.710819] hub 7-1:1.0: USB hub found [ 2.712792] hub 7-1:1.0: 3 ports detected [ 2.788210] usb 2-3.1.2: new full-speed USB device number 5 using ehci_hcd [ 2.860217] usb 2-3.1.2: device descriptor read/64, error -32 [ 3.036214] usb 2-3.1.2: device descriptor read/64, error -32 [ 3.212212] usb 2-3.1.2: new full-speed USB device number 6 using ehci_hcd [ 3.284216] usb 2-3.1.2: device descriptor read/64, error -32 [ 3.460212] usb 2-3.1.2: device descriptor read/64, error -32 [ 3.636217] usb 2-3.1.2: new full-speed USB device number 7 using ehci_hcd [ 3.679521] vesafb: mode is 640x480x32, linelength=2560, pages=0 [ 3.679525] vesafb: scrolling: redraw [ 3.679528] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 3.680889] vesafb: framebuffer at 0xcd000000, mapped to 0xffffc90011100000, using 1216k, total 1216k [ 3.681024] Console: switching to colour frame buffer device 80x30 [ 3.681038] fb0: VESA VGA frame buffer device [ 3.860737] xor: automatically using best checksumming function: generic_sse [ 3.880019] generic_sse: 7964.000 MB/sec [ 3.880021] xor: using function: generic_sse (7964.000 MB/sec) [ 3.880666] device-mapper: dm-raid45: initialized v0.2594b [ 4.044072] usb 2-3.1.2: device not accepting address 7, error -32 [ 4.090444] EXT4-fs (sda8): INFO: recovery required on readonly filesystem [ 4.090448] EXT4-fs (sda8): write access will be enabled during recovery [ 4.116228] usb 2-3.1.2: new full-speed USB device number 8 using ehci_hcd [ 4.524064] usb 2-3.1.2: device not accepting address 8, error -32 [ 4.524237] hub 2-3.1:1.0: unable to enumerate USB device on port 2 [ 4.596214] usb 2-3.1.3: new full-speed USB device number 9 using ehci_hcd [ 4.696314] usbcore: registered new interface driver usbhid [ 4.696317] usbhid: USB HID core driver [ 4.764230] usb 2-3.1.4: new high-speed USB device number 10 using ehci_hcd [ 4.856762] hub 2-3.1.4:1.0: USB hub found [ 4.856839] hub 2-3.1.4:1.0: 2 ports detected [ 4.929797] usb 7-1.1: new full-speed USB device number 3 using uhci_hcd [ 5.141797] usb 7-1.2: new full-speed USB device number 4 using uhci_hcd [ 5.266085] input: HID 044e:3013 as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1.2/7-1.2:1.0/input/input3 [ 5.266182] generic-usb 0003:044E:3013.0004: input,hidraw0: USB HID v1.11 Keyboard [HID 044e:3013] on usb-0000:00:1d.2-1.2/input0 [ 5.337792] usb 7-1.3: new full-speed USB device number 5 using uhci_hcd [ 5.463190] input: HID 044e:3012 as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1.3/7-1.3:1.0/input/input4 [ 5.463316] generic-usb 0003:044E:3012.0005: input,hidraw1: USB HID v1.11 Mouse [HID 044e:3012] on usb-0000:00:1d.2-1.3/input0 [ 5.548220] usb 2-3.1.4.1: new high-speed USB device number 11 using ehci_hcd [ 5.640775] hub 2-3.1.4.1:1.0: USB hub found [ 5.640826] hub 2-3.1.4.1:1.0: 4 ports detected [ 5.912225] usb 2-3.1.4.1.1: new high-speed USB device number 12 using ehci_hcd [ 6.093617] usbcore: registered new interface driver uas [ 6.093898] Initializing USB Mass Storage driver... [ 6.094111] scsi5 : usb-storage 2-3.1.4.1.1:1.0 [ 6.094214] usbcore: registered new interface driver usb-storage [ 6.094217] USB Mass Storage support registered. [ 6.164224] usb 2-3.1.4.1.4: new low-speed USB device number 13 using ehci_hcd [ 6.289458] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.1/2-3.1.4/2-3.1.4.1/2-3.1.4.1.4/2-3.1.4.1.4:1.0/input/input5 [ 6.289627] generic-usb 0003:046D:C50E.0006: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.7-3.1.4.1.4/input0 [ 7.072223] usb 2-3.1.2: new high-speed USB device number 14 using ehci_hcd [ 7.101886] scsi 5:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0 [ 7.105253] scsi 5:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44 PQ: 0 ANSI: 0 [ 7.106023] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 7.107515] sd 5:0:0:1: Attached scsi generic sg3 type 0 [ 7.202373] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 7.206243] sd 5:0:0:1: [sdc] Attached SCSI removable disk [ 22.411668] EXT4-fs (sda8): recovery complete [ 22.418261] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) [ 26.812981] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.916449] Adding 8191996k swap on /dev/sda7. Priority:-1 extents:1 across:8191996k [ 26.993624] udevd[602]: starting version 175 [ 27.657771] lp: driver loaded but no devices found [ 27.897469] sony_laptop: Sony Notebook Control Driver v0.6 [ 27.900146] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:28/SNY5001:00/input/input6 [ 27.900380] input: Sony Vaio Jogdial as /devices/virtual/input/input7 [ 28.472917] yenta_cardbus 0000:09:03.0: CardBus bridge found [104d:9005] [ 28.472945] yenta_cardbus 0000:09:03.0: Using CSCINT to route CSC interrupts to PCI [ 28.472948] yenta_cardbus 0000:09:03.0: Routing CardBus interrupts to PCI [ 28.472955] yenta_cardbus 0000:09:03.0: TI: mfunc 0x01121b22, devctl 0x64 [ 28.516464] cfg80211: Calling CRDA to update world regulatory domain [ 28.559780] device-mapper: multipath: version 1.3.0 loaded [ 28.704825] yenta_cardbus 0000:09:03.0: ISA IRQ mask 0x0cf8, PCI irq 16 [ 28.704830] yenta_cardbus 0000:09:03.0: Socket status: 30000006 [ 28.704835] pci_bus 0000:09: Raising subordinate bus# of parent bus (#09) from #0a to #0d [ 28.704848] yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge window: [io 0x7000-0x7fff] [ 28.704852] yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge window: [mem 0xfc100000-0xfc1fffff] [ 28.704855] pcmcia_socket pcmcia_socket0: cs: memory probe 0xfc100000-0xfc1fffff: excluding 0xfc100000-0xfc10ffff [ 28.704871] yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge window: [mem 0xc4000000-0xc7ffffff pref] [ 28.704875] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc4000000-0xc7ffffff: excluding 0xc4000000-0xc7ffffff [ 28.706549] tifm_7xx1 0000:09:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 28.725502] Bluetooth: Core ver 2.16 [ 28.725612] NET: Registered protocol family 31 [ 28.725615] Bluetooth: HCI device and connection manager initialized [ 28.725618] Bluetooth: HCI socket layer initialized [ 28.725620] Bluetooth: L2CAP socket layer initialized [ 28.725868] Bluetooth: SCO socket layer initialized [ 29.131860] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input8 [ 29.148383] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9 [ 29.167888] Linux video capture interface: v2.00 [ 29.208546] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 29.210389] usbcore: registered new interface driver btusb [ 29.226770] usb 7-1.2: input irq status -75 received [ 29.242779] usb 7-1.2: input irq status -75 received [ 29.258770] usb 7-1.2: input irq status -75 received [ 29.274776] usb 7-1.2: input irq status -75 received [ 29.290775] usb 7-1.2: input irq status -75 received [ 29.450691] uvcvideo: Found UVC 1.00 device (05ca:183b) [ 29.450955] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 29.451329] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26). [ 29.451333] uvcvideo: Failed to initialize the device (-5). [ 29.451407] uvcvideo: Found UVC 1.00 device (046d:080a) [ 29.484807] input: UVC Camera (046d:080a) as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.1/2-3.1.2/2-3.1.2:1.0/input/input10 [ 29.485255] usbcore: registered new interface driver uvcvideo [ 29.485258] USB Video Class driver (1.1.1) [ 29.570624] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.7-3.1.3/input2 [ 29.573850] input: Logitech Unifying Device. Wireless PID:101b as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.1/2-3.1.3/2-3.1.3:1.2/0003:046D:C52B.0003/input/input11 [ 29.574101] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101b] on usb-0000:00:1d.7-3.1.3:1 [ 29.576130] input: Logitech Unifying Device. Wireless PID:2008 as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.1/2-3.1.3/2-3.1.3:1.2/0003:046D:C52B.0003/input/input12 [ 29.576219] logitech-djdevice 0003:046D:C52B.0008: input,hidraw5: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2008] on usb-0000:00:1d.7-3.1.3:2 [ 29.923426] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xdc000-0xfffff [ 29.923460] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff [ 29.923487] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff [ 30.264908] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree: [ 30.264912] iwl4965: Copyright(c) 2003-2011 Intel Corporation [ 30.265017] iwl4965 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 30.265054] iwl4965 0000:06:00.0: setting latency timer to 64 [ 30.265113] iwl4965 0000:06:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4 [ 30.307883] iwl4965 0000:06:00.0: device EEPROM VER=0x36, CALIB=0x5 [ 30.307902] iwl4965 0000:06:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels [ 30.308139] iwl4965 0000:06:00.0: irq 47 for MSI/MSI-X [ 30.365068] cfg80211: World regulatory domain updated: [ 30.365072] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 30.365075] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 30.365079] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 30.365082] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 30.365085] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 30.365088] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 30.376996] type=1400 audit(1331748668.592:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=865 comm="apparmor_parser" [ 30.377007] type=1400 audit(1331748668.592:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=864 comm="apparmor_parser" [ 30.377458] type=1400 audit(1331748668.592:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=865 comm="apparmor_parser" [ 30.377468] type=1400 audit(1331748668.592:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=864 comm="apparmor_parser" [ 30.377722] type=1400 audit(1331748668.592:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=865 comm="apparmor_parser" [ 30.377733] type=1400 audit(1331748668.592:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=864 comm="apparmor_parser" [ 30.581997] iwl4965 0000:06:00.0: loaded firmware version 228.61.2.24 [ 30.582225] Registered led device: phy0-led [ 30.582263] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 30.631381] nvidia: module license 'NVIDIA' taints kernel. [ 30.631387] Disabling lock debugging due to kernel taint [ 30.648331] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 30.648431] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X [ 30.648477] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 30.863429] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 30.863442] nvidia 0000:01:00.0: setting latency timer to 64 [ 30.863450] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 30.863656] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.20 Mon Feb 6 21:07:30 PST 2012 [ 30.921002] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs' [ 30.944845] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 30.944965] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 31.028206] usbcore: registered new interface driver snd-usb-audio [ 33.100216] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro [ 33.391461] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null) [ 34.755027] type=1400 audit(1331748672.969:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=1130 comm="apparmor_parser" [ 34.810635] type=1400 audit(1331748673.025:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1131 comm="apparmor_parser" [ 34.810785] type=1400 audit(1331748673.025:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1131 comm="apparmor_parser" [ 34.810871] type=1400 audit(1331748673.025:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1131 comm="apparmor_parser" [ 35.003169] ppdev: user-space parallel port driver [ 35.436104] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 35.436108] Bluetooth: BNEP filters: protocol multicast [ 35.448874] Bluetooth: RFCOMM TTY layer initialized [ 35.448884] Bluetooth: RFCOMM socket layer initialized [ 35.448886] Bluetooth: RFCOMM ver 1.11 [ 36.502806] type=1400 audit(1331748674.717:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1159 comm="apparmor_parser" [ 36.503222] type=1400 audit(1331748674.717:13): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1159 comm="apparmor_parser" [ 36.585850] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 36.586328] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 36.593657] sky2 0000:08:00.0: eth0: enabling interface [ 36.596731] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 36.597331] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 36.642243] type=1400 audit(1331748674.857:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1142 comm="apparmor_parser" [ 36.642673] type=1400 audit(1331748674.857:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1142 comm="apparmor_parser" [ 36.647065] type=1400 audit(1331748674.861:16): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1183 comm="apparmor_parser" [ 36.647648] type=1400 audit(1331748674.861:17): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1183 comm="apparmor_parser" [ 37.148743] type=1400 audit(1331748675.365:18): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1185 comm="apparmor_parser" [ 38.276992] sky2 0000:08:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both [ 38.277545] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 38.506070] cfg80211: Found new beacon on frequency: 5180 MHz (Ch 36) on phy0 [ 44.238206] type=1400 audit(1331748682.453:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1137 comm="apparmor_parser" [ 44.239241] type=1400 audit(1331748682.453:20): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=1137 comm="apparmor_parser" [ 44.239609] type=1400 audit(1331748682.453:21): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=1137 comm="apparmor_parser" [ 44.240576] type=1400 audit(1331748682.457:22): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1137 comm="apparmor_parser" [ 44.241290] type=1400 audit(1331748682.457:23): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=1137 comm="apparmor_parser" [ 44.241644] type=1400 audit(1331748682.457:24): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=1137 comm="apparmor_parser" [ 44.242265] type=1400 audit(1331748682.457:25): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1137 comm="apparmor_parser" [ 44.242754] type=1400 audit(1331748682.457:26): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=1137 comm="apparmor_parser" [ 44.601806] init: failsafe main process (1088) killed by TERM signal [ 44.924452] init: hybrid-gfx main process (1447) terminated with status 127