[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-3-generic (buildd@yellow) (gcc version 4.6.2 (Ubuntu/Linaro 4.6.2-5ubuntu1) ) #8-Ubuntu SMP Sat Dec 3 16:16:08 UTC 2011 (Ubuntu 3.2.0-3.8-generic 3.2.0-rc4) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-generic root=UUID=2943b9c3-5d2f-4324-87d6-ee728b9f4e06 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfdf0000 (usable) [ 0.000000] BIOS-e820: 00000000cfdf0000 - 00000000cfdf1000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfdf1000 - 00000000cfe00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfe00000 - 00000000cff00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-890GPA-UD3H/GA-890GPA-UD3H, BIOS F4 03/08/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable [ 0.000000] 4 base 000100000000 mask FFFF00000000 write-back [ 0.000000] 5 base 000200000000 mask FFFFE0000000 write-back [ 0.000000] 6 base 000220000000 mask FFFFF0000000 write-back [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000230000000 aka 8960M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB [ 0.000000] reg 3, base: 3326MB, range: 2MB, type UC [ 0.000000] reg 4, base: 4GB, range: 4GB, type WB [ 0.000000] reg 5, base: 8GB, range: 512MB, type WB [ 0.000000] reg 6, base: 8704MB, range: 256MB, type WB [ 0.000000] total RAM covered: 3326M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 4 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB [ 0.000000] reg 3, base: 3326MB, range: 2MB, type UC [ 0.000000] e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcfdf0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000f4a60] f4a60 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfdf0000 [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00cfc00000 page 2M [ 0.000000] 00cfc00000 - 00cfdf0000 page 4k [ 0.000000] kernel direct mapping tables up to cfdf0000 @ 1fffd000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000 [ 0.000000] 0100000000 - 0200000000 page 1G [ 0.000000] 0200000000 - 0230000000 page 2M [ 0.000000] kernel direct mapping tables up to 230000000 @ cfdee000-cfdf0000 [ 0.000000] RAMDISK: 3653e000 - 37297000 [ 0.000000] ACPI: RSDP 00000000000f64b0 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000cfdf1000 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000cfdf1080 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000cfdf1100 076BC (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000cfdf0000 00040 [ 0.000000] ACPI: HPET 00000000cfdf8880 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000cfdf88c0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: MATS 00000000cfdf8900 00034 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: TAMG 00000000cfdf8970 00202 (v01 GBT GBT B0 5455312E BG?? 53450101) [ 0.000000] ACPI: APIC 00000000cfdf87c0 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000230000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000230000000 [ 0.000000] NODE_DATA [000000022fffb000 - 000000022fffffff] [ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00230000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cfdf0 [ 0.000000] 0: 0x00100000 -> 0x00230000 [ 0.000000] On node 0 totalpages: 2096511 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3914 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 831024 pages, LIFO batch:31 [ 0.000000] Normal zone: 19456 pages used for memmap [ 0.000000] Normal zone: 1225728 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfdf1000 [ 0.000000] PM: Registered nosave memory: 00000000cfdf1000 - 00000000cfe00000 [ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000cff00000 [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:10100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s82880 r8192 d23616 u262144 [ 0.000000] pcpu-alloc: s82880 r8192 d23616 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2060666 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-generic root=UUID=2943b9c3-5d2f-4324-87d6-ee728b9f4e06 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ c4000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000 [ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000 [ 0.000000] Memory: 8093012k/9175040k available (6527k kernel code, 788996k absent, 293032k reserved, 6658k data, 916k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 67108864 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3415.522 MHz processor. [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6831.04 BogoMIPS (lpj=13662088) [ 0.004006] pid_max: default: 32768 minimum: 301 [ 0.004024] Security Framework initialized [ 0.004035] AppArmor: AppArmor initialized [ 0.004036] Yama: becoming mindful. [ 0.004576] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.008120] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.009048] Mount-cache hash table entries: 256 [ 0.009149] Initializing cgroup subsys cpuacct [ 0.009153] Initializing cgroup subsys memory [ 0.009160] Initializing cgroup subsys devices [ 0.009161] Initializing cgroup subsys freezer [ 0.009162] Initializing cgroup subsys net_cls [ 0.009164] Initializing cgroup subsys blkio [ 0.009169] Initializing cgroup subsys perf_event [ 0.009191] tseg: 00cff00000 [ 0.009192] CPU: Physical Processor ID: 0 [ 0.009193] CPU: Processor Core ID: 0 [ 0.009195] mce: CPU supports 6 MCE banks [ 0.009202] using AMD E400 aware idle routine [ 0.010290] ACPI: Core revision 20110623 [ 0.012028] ftrace: allocating 26886 entries in 106 pages [ 0.016548] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.058545] CPU0: AMD Phenom(tm) II X4 955 Processor stepping 03 [ 0.060003] Performance Events: AMD PMU driver. [ 0.060003] ... version: 0 [ 0.060003] ... bit width: 48 [ 0.060003] ... generic registers: 4 [ 0.060003] ... value mask: 0000ffffffffffff [ 0.060003] ... max period: 00007fffffffffff [ 0.060003] ... fixed-purpose events: 0 [ 0.060003] ... event mask: 000000000000000f [ 0.060003] Booting Node 0, Processors #1 [ 0.060003] smpboot cpu 1: start_ip = 9a000 [ 0.148019] System has AMD C1E enabled [ 0.148033] Switch to broadcast mode on CPU1 [ 0.148057] #2 [ 0.148058] smpboot cpu 2: start_ip = 9a000 [ 0.240027] Switch to broadcast mode on CPU2 [ 0.240064] #3 [ 0.240065] smpboot cpu 3: start_ip = 9a000 [ 0.332033] Brought up 4 CPUs [ 0.332035] Total of 4 processors activated (27321.63 BogoMIPS). [ 0.332032] Switch to broadcast mode on CPU3 [ 0.334419] Switch to broadcast mode on CPU0 [ 0.334456] devtmpfs: initialized [ 0.334456] EVM: security.selinux [ 0.334456] EVM: security.SMACK64 [ 0.334456] EVM: security.capability [ 0.334456] PM: Registering ACPI NVS region at cfdf0000 (4096 bytes) [ 0.336549] print_constraints: dummy: [ 0.336571] RTC time: 21:02:06, date: 12/07/11 [ 0.336596] NET: Registered protocol family 16 [ 0.336684] node 0 link 0: io port [a000, ffff] [ 0.336686] TOM: 00000000d0000000 aka 3328M [ 0.336688] Fam 10h mmconf [e0000000, e00fffff] [ 0.336689] node 0 link 0: mmio [a0000, bffff] [ 0.336691] node 0 link 0: mmio [d0000000, dfffffff] [ 0.336693] node 0 link 0: mmio [f0000000, fe02ffff] [ 0.336695] node 0 link 0: mmio [e0000000, e05fffff] ==> [e0100000, e05fffff] [ 0.336697] TOM2: 0000000230000000 aka 8960M [ 0.336698] bus: [00, 05] on node 0 link 0 [ 0.336700] bus: 00 index 0 [io 0x0000-0xffff] [ 0.336702] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.336703] bus: 00 index 2 [mem 0xd0000000-0xdfffffff] [ 0.336704] bus: 00 index 3 [mem 0xe0600000-0xffffffff] [ 0.336706] bus: 00 index 4 [mem 0xe0100000-0xe05fffff] [ 0.336707] bus: 00 index 5 [mem 0x230000000-0xfcffffffff] [ 0.336714] Extended Config Space enabled on 1 nodes [ 0.336731] ACPI: bus type pci registered [ 0.336628] Trying to unpack rootfs image as initramfs... [ 0.336774] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.336776] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.352483] PCI: Using configuration type 1 for base access [ 0.353121] bio: create slab at 0 [ 0.353121] ACPI: Added _OSI(Module Device) [ 0.353121] ACPI: Added _OSI(Processor Device) [ 0.353121] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.353121] ACPI: Added _OSI(Processor Aggregator Device) [ 0.353121] ACPI: EC: Look up EC in DSDT [ 0.360114] ACPI Warning: Incorrect checksum in table [TAMG] - 0x45, should be 0x44 (20110623/tbutils-314) [ 0.360201] ACPI: Interpreter enabled [ 0.360205] ACPI: (supports S0 S3 S4 S5) [ 0.360218] ACPI: Using IOAPIC for interrupt routing [ 0.497505] ACPI: No dock devices found. [ 0.497508] HEST: Table not found. [ 0.497511] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.497552] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.497627] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.497629] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.497631] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.497632] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.497634] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff] [ 0.497645] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600 [ 0.497655] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit] [ 0.497682] pci 0000:00:02.0: [1022:9603] type 1 class 0x000604 [ 0.497703] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.497706] pci 0000:00:02.0: PME# disabled [ 0.497719] pci 0000:00:05.0: [1022:9605] type 1 class 0x000604 [ 0.497739] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.497741] pci 0000:00:05.0: PME# disabled [ 0.497755] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604 [ 0.497775] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.497777] pci 0000:00:0a.0: PME# disabled [ 0.497798] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101 [ 0.497813] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07] [ 0.497821] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03] [ 0.497829] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07] [ 0.497837] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03] [ 0.497844] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f] [ 0.497852] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff] [ 0.497868] pci 0000:00:11.0: set SATA to AHCI mode [ 0.497898] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 [ 0.497909] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff] [ 0.497967] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 [ 0.497982] pci 0000:00:12.2: reg 10: [mem 0xfe02d000-0xfe02d0ff] [ 0.498039] pci 0000:00:12.2: supports D1 D2 [ 0.498040] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.498043] pci 0000:00:12.2: PME# disabled [ 0.498060] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 [ 0.498071] pci 0000:00:13.0: reg 10: [mem 0xfe02c000-0xfe02cfff] [ 0.498127] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 [ 0.498143] pci 0000:00:13.2: reg 10: [mem 0xfe02b000-0xfe02b0ff] [ 0.498199] pci 0000:00:13.2: supports D1 D2 [ 0.498200] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.498203] pci 0000:00:13.2: PME# disabled [ 0.498220] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.498278] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101 [ 0.498289] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.498297] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.498304] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.498312] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.498319] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f] [ 0.498348] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 0.498366] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit] [ 0.498412] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.498415] pci 0000:00:14.2: PME# disabled [ 0.498425] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 [ 0.498486] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.498519] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 [ 0.498530] pci 0000:00:14.5: reg 10: [mem 0xfe02a000-0xfe02afff] [ 0.498586] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604 [ 0.498631] pci 0000:00:15.0: supports D1 D2 [ 0.498654] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03 [ 0.498665] pci 0000:00:16.0: reg 10: [mem 0xfe029000-0xfe029fff] [ 0.498721] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03 [ 0.498736] pci 0000:00:16.2: reg 10: [mem 0xfe028000-0xfe0280ff] [ 0.498793] pci 0000:00:16.2: supports D1 D2 [ 0.498794] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.498797] pci 0000:00:16.2: PME# disabled [ 0.498812] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600 [ 0.498823] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600 [ 0.498833] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600 [ 0.498842] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600 [ 0.498855] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600 [ 0.498897] pci 0000:01:00.0: [10de:0de1] type 0 class 0x000300 [ 0.498905] pci 0000:01:00.0: reg 10: [mem 0xfb000000-0xfbffffff] [ 0.498915] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xd7ffffff 64bit pref] [ 0.498924] pci 0000:01:00.0: reg 1c: [mem 0xde000000-0xdfffffff 64bit pref] [ 0.498930] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f] [ 0.498936] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref] [ 0.498975] pci 0000:01:00.1: [10de:0bea] type 0 class 0x000403 [ 0.498983] pci 0000:01:00.1: reg 10: [mem 0xfcffc000-0xfcffffff] [ 0.504049] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.504054] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.504056] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff] [ 0.504059] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.504094] pci 0000:02:00.0: [1033:0194] type 0 class 0x000c03 [ 0.504109] pci 0000:02:00.0: reg 10: [mem 0xfd9fe000-0xfd9fffff 64bit] [ 0.504162] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.504166] pci 0000:02:00.0: PME# disabled [ 0.512047] pci 0000:00:05.0: PCI bridge to [bus 02-02] [ 0.512052] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff] [ 0.512054] pci 0000:00:05.0: bridge window [mem 0xfd900000-0xfd9fffff] [ 0.512056] pci 0000:00:05.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.512091] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200 [ 0.512103] pci 0000:03:00.0: reg 10: [io 0xce00-0xceff] [ 0.512122] pci 0000:03:00.0: reg 18: [mem 0xfdaff000-0xfdafffff 64bit pref] [ 0.512134] pci 0000:03:00.0: reg 20: [mem 0xfdaf8000-0xfdafbfff 64bit pref] [ 0.512169] pci 0000:03:00.0: supports D1 D2 [ 0.512170] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.512174] pci 0000:03:00.0: PME# disabled [ 0.520049] pci 0000:00:0a.0: PCI bridge to [bus 03-03] [ 0.520053] Freeing initrd memory: 13668k freed [ 0.520058] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff] [ 0.520060] pci 0000:00:0a.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.520063] pci 0000:00:0a.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref] [ 0.520099] pci 0000:04:06.0: [4444:0016] type 0 class 0x000400 [ 0.520119] pci 0000:04:06.0: reg 10: [mem 0xf4000000-0xf7ffffff pref] [ 0.520215] pci 0000:04:07.0: [1814:0301] type 0 class 0x000280 [ 0.520233] pci 0000:04:07.0: reg 10: [mem 0xfdef0000-0xfdef7fff] [ 0.520331] pci 0000:04:0e.0: [104c:8024] type 0 class 0x000c00 [ 0.520351] pci 0000:04:0e.0: reg 10: [mem 0xfdeff000-0xfdeff7ff] [ 0.520362] pci 0000:04:0e.0: reg 14: [mem 0xfdef8000-0xfdefbfff] [ 0.520431] pci 0000:04:0e.0: supports D1 D2 [ 0.520432] pci 0000:04:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.520437] pci 0000:04:0e.0: PME# disabled [ 0.520466] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode) [ 0.520470] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 0.520473] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff] [ 0.520476] pci 0000:00:14.4: bridge window [mem 0xf4000000-0xf7ffffff pref] [ 0.520478] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.520480] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.520482] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.520483] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.520485] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode) [ 0.520547] pci 0000:05:00.0: [197b:2363] type 0 class 0x000101 [ 0.520635] pci 0000:05:00.0: reg 24: [mem 0xfdcfe000-0xfdcfffff] [ 0.520677] pci 0000:05:00.0: PME# supported from D3hot [ 0.520681] pci 0000:05:00.0: PME# disabled [ 0.520709] pci 0000:05:00.1: [197b:2363] type 0 class 0x000101 [ 0.520732] pci 0000:05:00.1: reg 10: [io 0xaf00-0xaf07] [ 0.520745] pci 0000:05:00.1: reg 14: [io 0xae00-0xae03] [ 0.520758] pci 0000:05:00.1: reg 18: [io 0xad00-0xad07] [ 0.520771] pci 0000:05:00.1: reg 1c: [io 0xac00-0xac03] [ 0.520784] pci 0000:05:00.1: reg 20: [io 0xab00-0xab0f] [ 0.520853] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.520865] pci 0000:00:15.0: PCI bridge to [bus 05-05] [ 0.520870] pci 0000:00:15.0: bridge window [io 0xa000-0xafff] [ 0.520873] pci 0000:00:15.0: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.520878] pci 0000:00:15.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.520898] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.521097] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.521127] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.521164] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.521185] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT] [ 0.521207] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] [ 0.521229] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.521231] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.521233] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.527936] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0 [ 0.527963] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0 [ 0.527988] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0 [ 0.528046] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0 [ 0.528070] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0 [ 0.528095] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0 [ 0.528120] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0 [ 0.528143] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0 [ 0.528220] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.528220] vgaarb: loaded [ 0.528220] vgaarb: bridge control possible 0000:01:00.0 [ 0.528220] i2c-core: driver [aat2870] using legacy suspend method [ 0.528220] i2c-core: driver [aat2870] using legacy resume method [ 0.528220] SCSI subsystem initialized [ 0.528220] libata version 3.00 loaded. [ 0.528220] usbcore: registered new interface driver usbfs [ 0.528220] usbcore: registered new interface driver hub [ 0.528220] usbcore: registered new device driver usb [ 0.528220] PCI: Using ACPI for IRQ routing [ 0.535586] PCI: pci_cache_line_size set to 64 bytes [ 0.535592] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit] [ 0.535670] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.535672] reserve RAM buffer: 00000000cfdf0000 - 00000000cfffffff [ 0.535739] NetLabel: Initializing [ 0.535740] NetLabel: domain hash size = 128 [ 0.535741] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.535748] NetLabel: unlabeled traffic allowed by default [ 0.535778] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.535778] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.537059] Switching to clocksource hpet [ 0.540302] AppArmor: AppArmor Filesystem Enabled [ 0.540317] pnp: PnP ACPI init [ 0.540327] ACPI: bus type pnp registered [ 0.540383] pnp 00:00: [bus 00-ff] [ 0.540385] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.540387] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.540388] pnp 00:00: [io 0x0d00-0xffff window] [ 0.540390] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.540391] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.540392] pnp 00:00: [mem 0xd0000000-0xfebfffff window] [ 0.540424] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.540431] pnp 00:01: [io 0x0010-0x001f] [ 0.540432] pnp 00:01: [io 0x0022-0x003f] [ 0.540433] pnp 00:01: [io 0x0044-0x005f] [ 0.540434] pnp 00:01: [io 0x0062-0x0063] [ 0.540436] pnp 00:01: [io 0x0065-0x006f] [ 0.540437] pnp 00:01: [io 0x0074-0x007f] [ 0.540438] pnp 00:01: [io 0x0091-0x0093] [ 0.540439] pnp 00:01: [io 0x00a2-0x00bf] [ 0.540440] pnp 00:01: [io 0x00e0-0x00ef] [ 0.540442] pnp 00:01: [io 0x04d0-0x04d1] [ 0.540443] pnp 00:01: [io 0x0220-0x0225] [ 0.540444] pnp 00:01: [io 0x0290-0x0294] [ 0.540484] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.540486] system 00:01: [io 0x0220-0x0225] has been reserved [ 0.540487] system 00:01: [io 0x0290-0x0294] has been reserved [ 0.540490] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.540876] pnp 00:02: [io 0x4100-0x411f] [ 0.540877] pnp 00:02: [io 0x0228-0x022f] [ 0.540878] pnp 00:02: [io 0x040b] [ 0.540879] pnp 00:02: [io 0x04d6] [ 0.540881] pnp 00:02: [io 0x0c00-0x0c01] [ 0.540882] pnp 00:02: [io 0x0c14] [ 0.540883] pnp 00:02: [io 0x0c50-0x0c52] [ 0.540884] pnp 00:02: [io 0x0c6c-0x0c6d] [ 0.540885] pnp 00:02: [io 0x0c6f] [ 0.540886] pnp 00:02: [io 0x0cd0-0x0cd1] [ 0.540887] pnp 00:02: [io 0x0cd2-0x0cd3] [ 0.540888] pnp 00:02: [io 0x0cd4-0x0cdf] [ 0.540890] pnp 00:02: [io 0x4000-0x40fe] [ 0.540891] pnp 00:02: [io 0x4210-0x4217] [ 0.540894] pnp 00:02: [io 0x0b00-0x0b0f] [ 0.540895] pnp 00:02: [io 0x0b10-0x0b1f] [ 0.540896] pnp 00:02: [io 0x0b20-0x0b3f] [ 0.540897] pnp 00:02: [mem 0x00000000-0x00000fff window] [ 0.540899] pnp 00:02: [mem 0xfee00400-0xfee00fff window] [ 0.540902] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.540920] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref] [ 0.540944] system 00:02: [io 0x4100-0x411f] has been reserved [ 0.540946] system 00:02: [io 0x0228-0x022f] has been reserved [ 0.540948] system 00:02: [io 0x040b] has been reserved [ 0.540949] system 00:02: [io 0x04d6] has been reserved [ 0.540951] system 00:02: [io 0x0c00-0x0c01] has been reserved [ 0.540952] system 00:02: [io 0x0c14] has been reserved [ 0.540953] system 00:02: [io 0x0c50-0x0c52] has been reserved [ 0.540955] system 00:02: [io 0x0c6c-0x0c6d] has been reserved [ 0.540956] system 00:02: [io 0x0c6f] has been reserved [ 0.540958] system 00:02: [io 0x0cd0-0x0cd1] has been reserved [ 0.540959] system 00:02: [io 0x0cd2-0x0cd3] has been reserved [ 0.540961] system 00:02: [io 0x0cd4-0x0cdf] has been reserved [ 0.540963] system 00:02: [io 0x4000-0x40fe] has been reserved [ 0.540964] system 00:02: [io 0x4210-0x4217] has been reserved [ 0.540966] system 00:02: [io 0x0b00-0x0b0f] has been reserved [ 0.540969] system 00:02: [io 0x0b10-0x0b1f] has been reserved [ 0.540971] system 00:02: [io 0x0b20-0x0b3f] has been reserved [ 0.540973] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved [ 0.540975] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.541033] pnp 00:03: [dma 4] [ 0.541034] pnp 00:03: [io 0x0000-0x000f] [ 0.541035] pnp 00:03: [io 0x0080-0x0090] [ 0.541036] pnp 00:03: [io 0x0094-0x009f] [ 0.541037] pnp 00:03: [io 0x00c0-0x00df] [ 0.541056] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.541084] pnp 00:04: [io 0x0070-0x0073] [ 0.541094] pnp 00:04: [irq 8] [ 0.541112] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.541117] pnp 00:05: [io 0x0061] [ 0.541133] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.541138] pnp 00:06: [io 0x00f0-0x00ff] [ 0.541144] pnp 00:06: [irq 13] [ 0.541162] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.541251] pnp 00:07: [io 0x03f0-0x03f5] [ 0.541252] pnp 00:07: [io 0x03f7] [ 0.541258] pnp 00:07: [irq 6] [ 0.541259] pnp 00:07: [dma 2] [ 0.541288] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.541395] pnp 00:08: [io 0x03f8-0x03ff] [ 0.541401] pnp 00:08: [irq 4] [ 0.541433] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.541465] pnp 00:09: [mem 0xe0000000-0xefffffff] [ 0.541499] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 0.541501] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.541587] pnp 00:0a: [mem 0x000cda00-0x000cffff] [ 0.541588] pnp 00:0a: [mem 0x000f0000-0x000f7fff] [ 0.541589] pnp 00:0a: [mem 0x000f8000-0x000fbfff] [ 0.541591] pnp 00:0a: [mem 0x000fc000-0x000fffff] [ 0.541592] pnp 00:0a: [mem 0xcfdf0000-0xcfdfffff] [ 0.541593] pnp 00:0a: [mem 0xffff0000-0xffffffff] [ 0.541595] pnp 00:0a: [mem 0x00000000-0x0009ffff] [ 0.541596] pnp 00:0a: [mem 0x00100000-0xcfdeffff] [ 0.541599] pnp 00:0a: [mem 0xcfe00000-0xcfefffff] [ 0.541600] pnp 00:0a: [mem 0xcff00000-0xcfffffff] [ 0.541601] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.541603] pnp 00:0a: [mem 0xfec00000-0xfec00fff] [ 0.541604] pnp 00:0a: [mem 0xfee00000-0xfee00fff] [ 0.541605] pnp 00:0a: [mem 0xfff80000-0xfffeffff] [ 0.541608] pnp 00:0a: disabling [mem 0x000cda00-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.541611] pnp 00:0a: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.541613] pnp 00:0a: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.541616] pnp 00:0a: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.541618] pnp 00:0a: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.541620] pnp 00:0a: disabling [mem 0x00100000-0xcfdeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.541664] system 00:0a: [mem 0xcfdf0000-0xcfdfffff] could not be reserved [ 0.541666] system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved [ 0.541668] system 00:0a: [mem 0xcfe00000-0xcfefffff] has been reserved [ 0.541669] system 00:0a: [mem 0xcff00000-0xcfffffff] could not be reserved [ 0.541671] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.541673] system 00:0a: [mem 0xfee00000-0xfee00fff] could not be reserved [ 0.541675] system 00:0a: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.541677] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.541690] pnp: PnP ACPI: found 11 devices [ 0.541691] ACPI: ACPI bus type pnp unregistered [ 0.548206] PCI: max bus depth: 1 pci_try_num: 2 [ 0.548229] pci 0000:01:00.0: BAR 6: assigned [mem 0xd8000000-0xd807ffff pref] [ 0.548231] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.548233] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.548235] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff] [ 0.548237] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.548240] pci 0000:00:05.0: PCI bridge to [bus 02-02] [ 0.548242] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff] [ 0.548244] pci 0000:00:05.0: bridge window [mem 0xfd900000-0xfd9fffff] [ 0.548246] pci 0000:00:05.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.548249] pci 0000:00:0a.0: PCI bridge to [bus 03-03] [ 0.548251] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff] [ 0.548253] pci 0000:00:0a.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.548255] pci 0000:00:0a.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref] [ 0.548258] pci 0000:00:14.4: PCI bridge to [bus 04-04] [ 0.548261] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 0.548265] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff] [ 0.548268] pci 0000:00:14.4: bridge window [mem 0xf4000000-0xf7ffffff pref] [ 0.548273] pci 0000:00:15.0: PCI bridge to [bus 05-05] [ 0.548275] pci 0000:00:15.0: bridge window [io 0xa000-0xafff] [ 0.548279] pci 0000:00:15.0: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.548282] pci 0000:00:15.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.548298] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.548300] pci 0000:00:02.0: setting latency timer to 64 [ 0.548310] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.548312] pci 0000:00:05.0: setting latency timer to 64 [ 0.548315] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.548317] pci 0000:00:0a.0: setting latency timer to 64 [ 0.548325] pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.548328] pci 0000:00:15.0: setting latency timer to 64 [ 0.548331] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.548332] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.548334] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.548335] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.548337] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff] [ 0.548338] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.548340] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff] [ 0.548341] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.548343] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.548344] pci_bus 0000:02: resource 1 [mem 0xfd900000-0xfd9fffff] [ 0.548346] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.548347] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.548349] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.548350] pci_bus 0000:03: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref] [ 0.548352] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff] [ 0.548353] pci_bus 0000:04: resource 1 [mem 0xfde00000-0xfdefffff] [ 0.548355] pci_bus 0000:04: resource 2 [mem 0xf4000000-0xf7ffffff pref] [ 0.548356] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] [ 0.548358] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] [ 0.548359] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] [ 0.548361] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff] [ 0.548362] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xfebfffff] [ 0.548364] pci_bus 0000:05: resource 0 [io 0xa000-0xafff] [ 0.548365] pci_bus 0000:05: resource 1 [mem 0xfdc00000-0xfdcfffff] [ 0.548367] pci_bus 0000:05: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.548393] NET: Registered protocol family 2 [ 0.548553] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.549537] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.551492] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.551727] TCP: Hash tables configured (established 524288 bind 65536) [ 0.551728] TCP reno registered [ 0.551738] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.551785] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.551885] NET: Registered protocol family 1 [ 0.840206] pci 0000:01:00.0: Boot video device [ 0.840249] PCI: CLS 4 bytes, default 64 [ 0.841911] PCI-DMA: Disabling AGP. [ 0.841989] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 0.841990] PCI-DMA: using GART IOMMU. [ 0.841992] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.844873] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x10400, but the register is already in use for vector 0xf9 on another cpu [ 0.844876] [Firmware Bug]: cpu 1, IBS interrupt offset 0 not available (MSRC001103A=0x0000000000000100) [ 0.844884] [Firmware Bug]: using offset 1 for IBS interrupts [ 0.844885] [Firmware Bug]: workaround enabled for IBS LVT offset [ 0.844901] perf: AMD IBS detected (0x0000001f) [ 0.845016] audit: initializing netlink socket (disabled) [ 0.845029] type=2000 audit(1323291726.840:1): initialized [ 0.876791] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.910838] VFS: Disk quotas dquot_6.5.2 [ 0.910878] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.911284] fuse init (API version 7.17) [ 0.911349] msgmni has been set to 15962 [ 0.911738] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.911771] io scheduler noop registered [ 0.911772] io scheduler deadline registered [ 0.911795] io scheduler cfq registered (default) [ 0.911927] pcieport 0000:00:02.0: setting latency timer to 64 [ 0.911955] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X [ 0.912061] pcieport 0000:00:05.0: setting latency timer to 64 [ 0.912079] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X [ 0.912149] pcieport 0000:00:0a.0: setting latency timer to 64 [ 0.912170] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X [ 0.912295] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.912313] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.912400] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.912403] ACPI: Power Button [PWRB] [ 0.912435] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.912437] ACPI: Power Button [PWRF] [ 0.912467] ACPI: processor limited to max C-state 1 [ 1.104535] ERST: Table is not found! [ 1.104537] GHES: HEST is not enabled! [ 1.104605] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.125003] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.264581] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.308222] Linux agpgart interface v0.103 [ 1.309239] brd: module loaded [ 1.309767] loop: module loaded [ 1.309897] ahci 0000:00:11.0: version 3.0 [ 1.309914] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.310011] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 1.310014] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.310428] scsi0 : ahci [ 1.310493] scsi1 : ahci [ 1.310546] scsi2 : ahci [ 1.310599] scsi3 : ahci [ 1.310660] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 19 [ 1.310663] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 19 [ 1.310665] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 19 [ 1.310668] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 19 [ 1.310773] ahci 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.324098] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.324101] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.324107] ahci 0000:05:00.0: setting latency timer to 64 [ 1.324356] scsi4 : ahci [ 1.324416] scsi5 : ahci [ 1.324445] ata5: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe100 irq 17 [ 1.324448] ata6: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe180 irq 17 [ 1.324565] pata_acpi 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.324640] pata_acpi 0000:05:00.1: enabling device (0000 -> 0001) [ 1.324644] pata_acpi 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.324659] pata_acpi 0000:05:00.1: setting latency timer to 64 [ 1.324667] pata_acpi 0000:05:00.1: PCI INT B disabled [ 1.324949] Fixed MDIO Bus: probed [ 1.324964] tun: Universal TUN/TAP device driver, 1.6 [ 1.324965] tun: (C) 1999-2004 Max Krasnyansky [ 1.325004] arcnet loaded. [ 1.325005] PPP generic driver version 2.4.2 [ 1.325089] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.325131] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.325142] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1.325192] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.325199] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.325211] QUIRK: Enable AMD PLL fix [ 1.325220] ehci_hcd 0000:00:12.2: debug port 1 [ 1.325230] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02d000 [ 1.336070] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.336180] hub 1-0:1.0: USB hub found [ 1.336183] hub 1-0:1.0: 5 ports detected [ 1.336292] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.336303] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.336337] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.336343] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.336359] ehci_hcd 0000:00:13.2: debug port 1 [ 1.336369] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe02b000 [ 1.348078] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.348166] hub 2-0:1.0: USB hub found [ 1.348169] hub 2-0:1.0: 5 ports detected [ 1.348275] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.348286] ehci_hcd 0000:00:16.2: EHCI Host Controller [ 1.348319] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 1.348325] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.348341] ehci_hcd 0000:00:16.2: debug port 1 [ 1.348351] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe028000 [ 1.360078] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.360161] hub 3-0:1.0: USB hub found [ 1.360163] hub 3-0:1.0: 4 ports detected [ 1.360236] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.360283] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.360294] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.360328] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 1.360351] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe02e000 [ 1.420150] hub 4-0:1.0: USB hub found [ 1.420155] hub 4-0:1.0: 5 ports detected [ 1.420263] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.420274] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.420307] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.420319] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02c000 [ 1.480145] hub 5-0:1.0: USB hub found [ 1.480150] hub 5-0:1.0: 5 ports detected [ 1.480256] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.480266] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 1.480304] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 1.480317] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe02a000 [ 1.540166] hub 6-0:1.0: USB hub found [ 1.540171] hub 6-0:1.0: 2 ports detected [ 1.540271] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.540282] ohci_hcd 0000:00:16.0: OHCI Host Controller [ 1.540317] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 1.540330] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe029000 [ 1.600162] hub 7-0:1.0: USB hub found [ 1.600167] hub 7-0:1.0: 4 ports detected [ 1.600241] uhci_hcd: USB Universal Host Controller Interface driver [ 1.600300] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.600312] xhci_hcd 0000:02:00.0: setting latency timer to 64 [ 1.600314] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.600348] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8 [ 1.600450] xhci_hcd 0000:02:00.0: irq 17, io mem 0xfd9fe000 [ 1.600483] xhci_hcd 0000:02:00.0: irq 43 for MSI/MSI-X [ 1.600488] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X [ 1.600492] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X [ 1.600496] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X [ 1.600499] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X [ 1.600604] xHCI xhci_add_endpoint called for root hub [ 1.600606] xHCI xhci_check_bandwidth called for root hub [ 1.600623] hub 8-0:1.0: USB hub found [ 1.600627] hub 8-0:1.0: 2 ports detected [ 1.600663] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.600691] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9 [ 1.603881] xHCI xhci_add_endpoint called for root hub [ 1.603882] xHCI xhci_check_bandwidth called for root hub [ 1.603897] hub 9-0:1.0: USB hub found [ 1.603903] hub 9-0:1.0: 2 ports detected [ 1.628110] ata4: SATA link down (SStatus 0 SControl 300) [ 1.628138] ata1: SATA link down (SStatus 0 SControl 300) [ 1.628170] ata2: SATA link down (SStatus 0 SControl 300) [ 1.628183] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.648070] ata6: SATA link down (SStatus 0 SControl 300) [ 1.662541] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS? [ 1.662543] i8042: If AUX port is really absent please use the 'i8042.noaux' option [ 1.816099] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.817310] ata5.00: ATA-7: ST3160828AS, 8.03, max UDMA/133 [ 1.817312] ata5.00: 312500000 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.818486] ata5.00: configured for UDMA/133 [ 1.828096] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.829751] ata3.00: ATAPI: Optiarc DVD RW AD-7260S, 1.00, max UDMA/100 [ 1.831701] ata3.00: configured for UDMA/100 [ 1.833591] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7260S 1.00 PQ: 0 ANSI: 5 [ 1.835709] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.835711] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.835809] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.835876] sr 2:0:0:0: Attached scsi generic sg0 type 5 [ 1.836041] scsi 4:0:0:0: Direct-Access ATA ST3160828AS 8.03 PQ: 0 ANSI: 5 [ 1.836135] sd 4:0:0:0: [sda] 312500000 512-byte logical blocks: (160 GB/149 GiB) [ 1.836157] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 1.836230] sd 4:0:0:0: [sda] Write Protect is off [ 1.836233] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.836267] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.844072] Refined TSC clocksource calibration: 3415.090 MHz. [ 1.844081] Switching to clocksource tsc [ 1.856065] usb 4-5: new low-speed USB device number 2 using ohci_hcd [ 1.877771] sda: sda1 sda2 sda3 [ 1.878033] sd 4:0:0:0: [sda] Attached SCSI disk [ 1.912142] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.912237] mousedev: PS/2 mouse device common for all mice [ 1.912342] rtc_cmos 00:04: RTC can wake from S4 [ 1.912419] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.912446] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.912500] device-mapper: uevent: version 1.0.3 [ 1.912542] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 1.912546] cpuidle: using governor ladder [ 1.912548] cpuidle: using governor menu [ 1.912549] EFI Variables Facility v0.08 2004-May-17 [ 1.912693] TCP cubic registered [ 1.912753] NET: Registered protocol family 10 [ 1.913040] NET: Registered protocol family 17 [ 1.913050] Registering the dns_resolver key type [ 1.913136] PM: Hibernation image not present or could not be loaded. [ 1.913143] registered taskstats version 1 [ 1.934041] Magic number: 7:751:44 [ 1.934131] rtc_cmos 00:04: setting system clock to 2011-12-07 21:02:08 UTC (1323291728) [ 1.934139] powernow-k8: Found 1 AMD Phenom(tm) II X4 955 Processor (4 cpu cores) (version 2.20.00) [ 1.934145] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [ 1.934146] [Firmware Bug]: powernow-k8: Try again with latest BIOS. [ 1.934156] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.934157] EDD information not available. [ 1.935196] Freeing unused kernel memory: 916k freed [ 1.935355] Write protecting the kernel read-only data: 12288k [ 1.939126] Freeing unused kernel memory: 1644k freed [ 1.942139] Freeing unused kernel memory: 1208k freed [ 1.953094] udevd[150]: starting version 175 [ 1.972623] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.972645] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.972682] r8169 0000:03:00.0: setting latency timer to 64 [ 1.972724] r8169 0000:03:00.0: irq 48 for MSI/MSI-X [ 1.973020] r8169 0000:03:00.0: eth0: RTL8168e/8111e at 0xffffc90000c7c000, 1c:6f:65:ca:7c:ff, XID 0c200000 IRQ 48 [ 1.973023] r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.973670] Floppy drive(s): fd0 is 1.44M [ 1.979175] scsi6 : pata_atiixp [ 1.979293] scsi7 : pata_atiixp [ 1.979653] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 1.979655] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 1.991871] FDC 0 is a post-1991 82077 [ 2.080244] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/input/input2 [ 2.080308] generic-usb 0003:046E:550F.0001: input,hidraw0: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:12.0-5/input0 [ 2.102190] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.1/input/input3 [ 2.102309] generic-usb 0003:046E:550F.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:12.0-5/input1 [ 2.102323] usbcore: registered new interface driver usbhid [ 2.102325] usbhid: USB HID core driver [ 2.155512] firewire_ohci 0000:04:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2.208127] firewire_ohci: Added fw-ohci device 0000:04:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [ 2.237982] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 2.237984] EXT4-fs (sda1): write access will be enabled during recovery [ 2.366507] pata_jmicron 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.366532] pata_jmicron 0000:05:00.1: setting latency timer to 64 [ 2.366757] scsi8 : pata_jmicron [ 2.366805] scsi9 : pata_jmicron [ 2.366831] ata9: PATA max UDMA/100 cmd 0xaf00 ctl 0xae00 bmdma 0xab00 irq 17 [ 2.366833] ata10: PATA max UDMA/100 cmd 0xad00 ctl 0xac00 bmdma 0xab08 irq 17 [ 2.372077] usb 5-1: new low-speed USB device number 2 using ohci_hcd [ 2.505438] EXT4-fs (sda1): orphan cleanup on readonly fs [ 2.505444] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 279350 [ 2.505478] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 277519 [ 2.505486] EXT4-fs (sda1): 2 orphan inodes deleted [ 2.505487] EXT4-fs (sda1): recovery complete [ 2.549415] input: Microsoft Microsoft Optical Mouse with Tilt Wheel as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input4 [ 2.549504] generic-usb 0003:045E:00D1.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft Optical Mouse with Tilt Wheel] on usb-0000:00:13.0-1/input0 [ 2.708118] firewire_core: created device fw0: GUID 009ad35e001c6f65, S400 [ 2.729057] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 9.647221] udevd[362]: starting version 175 [ 9.721951] lp: driver loaded but no devices found [ 9.723952] MCE: In-kernel MCE decoding enabled. [ 9.724706] EDAC MC: Ver: 2.1.0 [ 9.725228] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 9.725583] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 [ 9.725635] SP5100 TCO timer: mmio address 0xb8fe00 already in use [ 9.726107] wmi: Mapper loaded [ 9.726428] AMD64 EDAC driver v3.4.0 [ 9.727979] Linux video capture interface: v2.00 [ 9.729601] EDAC amd64: DRAM ECC disabled. [ 9.729608] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 9.729609] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 9.729610] (Note that use of the override may cause unknown side effects.) [ 9.730127] ivtv: Start initialization, version 1.4.3 [ 9.730857] ivtv0: Initializing card 0 [ 9.730860] ivtv0: Autodetected Hauppauge card (cx23416 based) [ 9.731909] ivtv 0000:04:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 9.731916] ivtv0: Unreasonably low latency timer, setting to 64 (was 32) [ 9.756240] cfg80211: Calling CRDA to update world regulatory domain [ 9.764744] cfg80211: World regulatory domain updated: [ 9.764746] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 9.764748] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.764750] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.764751] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.764753] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.764754] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.787609] tveeprom 1-0050: Hauppauge model 26582, rev F0B2, serial# 9680883 [ 9.787611] tveeprom 1-0050: tuner model is TCL M2523_5N_E (idx 112, type 50) [ 9.787613] tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) [ 9.787614] tveeprom 1-0050: audio processor is CX25843 (idx 37) [ 9.787616] tveeprom 1-0050: decoder processor is CX25843 (idx 30) [ 9.787617] tveeprom 1-0050: has no radio [ 9.787618] ivtv0: Autodetected Hauppauge WinTV PVR-150 [ 9.787649] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.790924] cx25840 1-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0) [ 9.796647] type=1400 audit(1323291736.360:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=420 comm="apparmor_parser" [ 9.796660] type=1400 audit(1323291736.360:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=491 comm="apparmor_parser" [ 9.796957] type=1400 audit(1323291736.360:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=420 comm="apparmor_parser" [ 9.796972] type=1400 audit(1323291736.360:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=491 comm="apparmor_parser" [ 9.797155] type=1400 audit(1323291736.360:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=420 comm="apparmor_parser" [ 9.797174] type=1400 audit(1323291736.360:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=491 comm="apparmor_parser" [ 9.805863] i2c-core: driver [tuner] using legacy suspend method [ 9.805865] i2c-core: driver [tuner] using legacy resume method [ 9.808797] tuner 1-0061: Tuner -1 found with type(s) Radio TV. [ 9.810029] wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) [ 9.826103] tuner-simple 1-0061: creating new instance [ 9.826105] tuner-simple 1-0061: type set to 50 (TCL 2002N) [ 9.827689] ivtv0: Registered device video0 for encoder MPG (4096 kB) [ 9.827815] ivtv0: Registered device video32 for encoder YUV (2048 kB) [ 9.827927] ivtv0: Registered device vbi0 for encoder VBI (1024 kB) [ 9.827957] ivtv0: Registered device video24 for encoder PCM (320 kB) [ 9.827958] ivtv0: Initialized card: Hauppauge WinTV PVR-150 [ 9.827991] ivtv: End initialization [ 9.831312] rt61pci 0000:04:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 9.834210] Adding 2097148k swap on /dev/sda3. Priority:-1 extents:1 across:2097148k [ 9.839011] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 9.839011] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.839011] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 9.839012] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.839014] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 9.839015] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.839017] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 9.839019] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.839020] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 9.839022] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.839023] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 9.839025] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.839026] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 9.839028] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.839029] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 9.839031] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.839033] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 9.839034] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.839036] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 9.839037] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.839039] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 9.839041] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.839042] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 9.839044] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.839045] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 9.839047] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.839048] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 9.839050] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.840807] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 9.841171] Registered led device: rt61pci-phy0::radio [ 9.841182] Registered led device: rt61pci-phy0::assoc [ 9.841371] hda_codec: ALC889: BIOS auto-probing. [ 9.848790] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 9.849380] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 9.849383] hda_intel: Disabling MSI [ 9.849413] snd_hda_intel 0000:01:00.1: setting latency timer to 64 [ 10.490259] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) [ 10.688067] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 10.688246] ivtv0: Encoder revision: 0x02060039 [ 10.694619] Disabling lock debugging due to kernel taint [ 10.694624] nvidia: module license 'NVIDIA' taints kernel. [ 10.720026] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 10.752026] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 10.784025] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 10.800096] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input6 [ 10.800168] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input7 [ 10.800216] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8 [ 10.800262] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9 [ 10.804395] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 10.804403] nvidia 0000:01:00.0: setting latency timer to 64 [ 10.804406] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 10.804755] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 285.05.09 Fri Sep 23 17:31:57 PDT 2011 [ 11.017718] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 12.260492] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 12.378361] type=1400 audit(1323291738.940:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=898 comm="apparmor_parser" [ 12.378656] type=1400 audit(1323291738.940:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=898 comm="apparmor_parser" [ 12.378676] type=1400 audit(1323291738.940:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=897 comm="apparmor_parser" [ 12.378840] type=1400 audit(1323291738.940:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=898 comm="apparmor_parser" [ 12.445833] init: failsafe main process (867) killed by TERM signal [ 12.450430] Bluetooth: Core ver 2.16 [ 12.450465] NET: Registered protocol family 31 [ 12.450467] Bluetooth: HCI device and connection manager initialized [ 12.450469] Bluetooth: HCI socket layer initialized [ 12.450470] Bluetooth: L2CAP socket layer initialized [ 12.450473] Bluetooth: SCO socket layer initialized [ 12.462518] Bluetooth: RFCOMM TTY layer initialized [ 12.462522] Bluetooth: RFCOMM socket layer initialized [ 12.462524] Bluetooth: RFCOMM ver 1.11 [ 12.477297] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.477300] Bluetooth: BNEP filters: protocol multicast