[ 38.748272] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 38.804109] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 38.804373] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 38.966902] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 43.142132] cfg80211: Found new beacon on frequency: 5745 MHz (Ch 149) on phy0 [ 46.893970] wlan0: authenticate with 3c:ea:4f:85:07:d1 (try 1) [ 46.896056] wlan0: authenticated [ 46.900747] wlan0: associate with 3c:ea:4f:85:07:d1 (try 1) [ 46.903104] wlan0: RX AssocResp from 3c:ea:4f:85:07:d1 (capab=0x431 status=0 aid=4) [ 46.903108] wlan0: associated [ 46.908907] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 46.908962] cfg80211: Calling CRDA for country: US [ 46.912267] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 46.912271] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 46.912273] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 46.912276] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 46.912278] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 46.912280] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 46.912283] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 46.912285] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 46.912287] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 46.912290] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 46.912292] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 46.912294] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 46.912297] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 46.912299] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 46.912301] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 46.912304] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 46.912306] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 46.912308] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 46.912311] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 46.912313] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 46.912315] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 46.912318] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 46.912320] cfg80211: Disabling freq 2467 MHz [ 46.912322] cfg80211: Disabling freq 2472 MHz [ 46.912323] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule: [ 46.912326] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (300 mBi, 1700 mBm) [ 46.912328] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule: [ 46.912331] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (300 mBi, 1700 mBm) [ 46.912333] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule: [ 46.912335] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (300 mBi, 1700 mBm) [ 46.912338] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule: [ 46.912340] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (300 mBi, 1700 mBm) [ 46.912342] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule: [ 46.912345] cfg80211: 5250000 KHz - 5330000 KHz @ KHz), (300 mBi, 2000 mBm) [ 46.912347] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule: [ 46.912350] cfg80211: 5250000 KHz - 5330000 KHz @ KHz), (300 mBi, 2000 mBm) [ 46.912352] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule: [ 46.912354] cfg80211: 5250000 KHz - 5330000 KHz @ KHz), (300 mBi, 2000 mBm) [ 46.912357] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule: [ 46.912359] cfg80211: 5250000 KHz - 5330000 KHz @ KHz), (300 mBi, 2000 mBm) [ 46.912361] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule: [ 46.912364] cfg80211: 5490000 KHz - 5600000 KHz @ KHz), (300 mBi, 2000 mBm) [ 46.912366] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule: [ 46.912369] cfg80211: 5490000 KHz - 5600000 KHz @ KHz), (300 mBi, 2000 mBm) [ 46.912371] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule: [ 46.912373] cfg80211: 5490000 KHz - 5600000 KHz @ KHz), (300 mBi, 2000 mBm) [ 46.912376] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule: [ 46.912378] cfg80211: 5490000 KHz - 5600000 KHz @ KHz), (300 mBi, 2000 mBm) [ 46.912380] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule: [ 46.912383] cfg80211: 5490000 KHz - 5600000 KHz @ KHz), (300 mBi, 2000 mBm) [ 46.912385] cfg80211: Disabling freq 5600 MHz [ 46.912386] cfg80211: Disabling freq 5620 MHz [ 46.912388] cfg80211: Disabling freq 5640 MHz [ 46.912390] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule: [ 46.912392] cfg80211: 5650000 KHz - 5710000 KHz @ KHz), (300 mBi, 2000 mBm) [ 46.912394] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule: [ 46.912397] cfg80211: 5650000 KHz - 5710000 KHz @ KHz), (300 mBi, 2000 mBm) [ 46.912399] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule: [ 46.912402] cfg80211: 5650000 KHz - 5710000 KHz @ KHz), (300 mBi, 2000 mBm) [ 46.912404] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule: [ 46.912406] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (300 mBi, 3000 mBm) [ 46.912408] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule: [ 46.912411] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (300 mBi, 3000 mBm) [ 46.912413] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule: [ 46.912416] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (300 mBi, 3000 mBm) [ 46.912418] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule: [ 46.912421] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (300 mBi, 3000 mBm) [ 46.912423] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule: [ 46.912425] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (300 mBi, 3000 mBm) [ 46.912430] cfg80211: Regulatory domain changed to country: US [ 46.912431] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 46.912434] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 46.912437] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 46.912439] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 46.912441] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 46.912444] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 46.912446] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 49.929639] vboxdrv: Found 2 processor cores. [ 49.929879] vboxdrv: fAsync=0 offMin=0x28e offMax=0x15c8 [ 49.929980] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 49.929982] vboxdrv: Successfully loaded version 4.1.2_Ubuntu (interface 0x00190000). [ 50.115667] vboxpci: IOMMU not found (not registered) [ 50.715693] Bluetooth: Core ver 2.16 [ 50.715718] NET: Registered protocol family 31 [ 50.715719] Bluetooth: HCI device and connection manager initialized [ 50.715722] Bluetooth: HCI socket layer initialized [ 50.715723] Bluetooth: L2CAP socket layer initialized [ 50.716635] Bluetooth: SCO socket layer initialized [ 50.783616] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 50.783618] Bluetooth: BNEP filters: protocol multicast [ 50.786295] Bluetooth: RFCOMM TTY layer initialized [ 50.786299] Bluetooth: RFCOMM socket layer initialized [ 50.786300] Bluetooth: RFCOMM ver 1.11 [ 55.621755] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 57.940113] wlan0: no IPv6 routers present [ 58.964570] init: plymouth-stop pre-start process (1822) terminated with status 1 [ 62.420883] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 1187.092877] wlan0: deauthenticating from 3c:ea:4f:85:07:d1 by local choice (reason=3) [ 1187.125180] cfg80211: All devices are disconnected, going to restore regulatory settings [ 1187.125189] cfg80211: Restoring regulatory settings [ 1187.125209] cfg80211: Calling CRDA to update world regulatory domain [ 1187.137153] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 1187.137157] cfg80211: World regulatory domain updated: [ 1187.137159] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1187.137162] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1187.137165] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1187.137167] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1187.137170] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1187.137172] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1188.895277] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 1189.864712] init: anacron main process (1233) killed by TERM signal [ 1190.088746] PM: Syncing filesystems ... done. [ 1190.106558] PM: Preparing system for mem sleep [ 1190.660724] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 1190.676147] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 1190.692138] PM: Entering mem sleep [ 1190.692208] Suspending console(s) (use no_console_suspend to debug) [ 1190.844835] PM: suspend of drv:psmouse dev:serio2 complete after 151.981 msecs [ 1190.845762] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1190.845953] sd 0:0:0:0: [sda] Stopping disk [ 1190.929266] ACPI handle has no context! [ 1190.929275] sdhci-pci 0000:15:00.2: PCI INT C disabled [ 1190.929282] ACPI handle has no context! [ 1190.929337] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 1190.929342] ehci_hcd 0000:00:1d.7: PCI INT D disabled [ 1190.929350] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 1190.929355] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 1190.929366] pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY [ 1190.929371] pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY [ 1190.929384] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY [ 1190.929388] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY [ 1190.929409] ehci_hcd 0000:00:1a.7: PCI INT D disabled [ 1190.929419] uhci_hcd 0000:00:1a.2: PCI INT C disabled [ 1190.929429] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 1190.929439] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 1190.929624] e1000e 0000:00:19.0: PCI INT A disabled [ 1190.929630] e1000e 0000:00:19.0: PME# enabled [ 1190.929637] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [ 1190.929690] ACPI handle has no context! [ 1190.936061] ACPI handle has no context! [ 1190.944048] i915 0000:00:02.0: power state changed by ACPI to D3 [ 1191.032566] HDA Intel 0000:00:1b.0: PCI INT B disabled [ 1191.048018] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 118.625 msecs [ 1191.152341] PM: suspend of drv:sd dev:0:0:0:0 complete after 306.589 msecs [ 1191.152357] PM: suspend of drv:scsi dev:target0:0:0 complete after 306.528 msecs [ 1191.152371] PM: suspend of drv:scsi dev:host0 complete after 306.418 msecs [ 1191.168023] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 238.711 msecs [ 1191.168037] PM: suspend of drv: dev:pci0000:00 complete after 238.054 msecs [ 1191.168043] PM: suspend of devices complete after 475.387 msecs [ 1191.168045] PM: suspend devices took 0.476 seconds [ 1191.216018] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [ 1191.216120] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [ 1191.232017] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3 [ 1191.232057] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D3 [ 1191.252022] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [ 1191.268179] PM: late suspend of devices complete after 100.130 msecs [ 1191.268550] ACPI: Preparing to enter system sleep state S3 [ 1191.428055] PM: Saving platform NVS memory [ 1191.429350] Disabling non-boot CPUs ... [ 1191.532027] CPU 1 is now offline [ 1191.532382] Extended CMOS year: 2000 [ 1191.532382] ACPI: Low-level resume complete [ 1191.532382] PM: Restoring platform NVS memory [ 1191.532382] Extended CMOS year: 2000 [ 1191.532382] Enabling non-boot CPUs ... [ 1191.532382] Booting Node 0 Processor 1 APIC 0x1 [ 1191.532382] smpboot cpu 1: start_ip = 9a000 [ 1191.430668] Initializing CPU#1 [ 1191.430668] Disabled fast string operations [ 1191.624013] Switched to NOHz mode on CPU #1 [ 1191.684134] CPU1 is up [ 1191.685687] ACPI: Waking up from system sleep state S3 [ 1192.056219] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 1192.056246] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [ 1192.056258] mei 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 1192.056269] mei 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006) [ 1192.056283] serial 0000:00:03.3: restoring config space at offset 0xf (was 0x200, writing 0x20b) [ 1192.076021] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 1192.076024] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 1192.076054] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 1192.076066] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 1192.076068] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 1192.076100] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 1192.076115] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 1192.076117] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 1192.076146] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 1192.076157] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 1192.076160] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 1192.076197] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 1192.076215] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 1192.076220] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 1192.076261] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [ 1192.076302] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0xbc51bc41) [ 1192.076307] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0xbc30bc20) [ 1192.076313] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x9090) [ 1192.076325] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 1192.076384] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0xbc11bc01) [ 1192.076390] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x8080) [ 1192.076402] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 1192.076472] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 1192.076542] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 1192.076579] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 1192.076581] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 1192.076610] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 1192.076622] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 1192.076624] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 1192.076655] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 1192.076695] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 1192.076742] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 1192.076760] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 1192.076764] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 1192.076889] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 1192.092021] firewire_ohci 0000:15:00.1: BAR 0: set to [mem 0xf4801000-0xf48017ff] (PCI address [0xf4801000-0xf48017ff]) [ 1192.092056] firewire_ohci 0000:15:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [ 1192.092064] firewire_ohci 0000:15:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [ 1192.108019] sdhci-pci 0000:15:00.2: BAR 0: set to [mem 0xf4801800-0xf48018ff] (PCI address [0xf4801800-0xf48018ff]) [ 1192.108054] sdhci-pci 0000:15:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [ 1192.108061] sdhci-pci 0000:15:00.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [ 1192.124019] r852 0000:15:00.5: BAR 0: set to [mem 0xf4802400-0xf48024ff] (PCI address [0xf4802400-0xf48024ff]) [ 1192.124053] r852 0000:15:00.5: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [ 1192.124061] r852 0000:15:00.5: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [ 1192.124839] PM: early resume of devices complete after 68.808 msecs [ 1192.124934] i915 0000:00:02.0: power state changed by ACPI to D0 [ 1192.124939] i915 0000:00:02.0: power state changed by ACPI to D0 [ 1192.124943] i915 0000:00:02.0: setting latency timer to 64 [ 1192.125128] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [ 1192.125137] e1000e 0000:00:19.0: PME# disabled [ 1192.125236] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 1192.127348] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 1192.127351] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 1192.127358] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1192.127365] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1192.127398] usb usb3: root hub lost power or was reset [ 1192.127418] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1192.127425] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1192.127450] usb usb4: root hub lost power or was reset [ 1192.127462] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 1192.127465] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 1192.127469] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 1192.127475] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 1192.127499] usb usb5: root hub lost power or was reset [ 1192.127513] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 1192.127518] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 1192.127524] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 1192.127530] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1192.127579] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1192.127585] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 1192.127626] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X [ 1192.127667] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [ 1192.127679] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY [ 1192.127690] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY [ 1192.127700] pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY [ 1192.127707] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 1192.127709] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 1192.127714] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1192.127720] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1192.127745] usb usb6: root hub lost power or was reset [ 1192.127759] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1192.127765] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1192.127790] usb usb7: root hub lost power or was reset [ 1192.127804] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1192.127810] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1192.127834] usb usb8: root hub lost power or was reset [ 1192.127848] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 1192.127853] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 1192.127859] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1192.127865] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1192.127912] pci 0000:00:1e.0: setting latency timer to 64 [ 1192.127929] ahci 0000:00:1f.2: setting latency timer to 64 [ 1192.128017] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1192.128020] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 1192.129638] sd 0:0:0:0: [sda] Starting disk [ 1192.144771] legacy_resume(): pnp_bus_resume+0x0/0x70 returns -19 [ 1192.144774] PM: Device 00:0a failed to resume: error -19 [ 1192.147880] Extended CMOS year: 2000 [ 1192.188128] firewire_core: skipped bus generations, destroying all nodes [ 1192.248075] PM: resume of drv: dev:ep_00 complete after 118.896 msecs [ 1192.248083] PM: resume of drv:hub dev:3-0:1.0 complete after 118.940 msecs [ 1192.248094] PM: resume of drv: dev:ep_81 complete after 118.935 msecs [ 1192.248115] PM: resume of drv: dev:ep_00 complete after 118.804 msecs [ 1192.248122] PM: resume of drv:hub dev:5-0:1.0 complete after 118.844 msecs [ 1192.248132] PM: resume of drv: dev:ep_00 complete after 118.889 msecs [ 1192.248139] PM: resume of drv:hub dev:4-0:1.0 complete after 118.928 msecs [ 1192.248148] PM: resume of drv: dev:ep_81 complete after 118.853 msecs [ 1192.248154] PM: resume of drv: dev:ep_81 complete after 118.927 msecs [ 1192.248167] PM: resume of drv: dev:ep_00 complete after 118.720 msecs [ 1192.248176] PM: resume of drv:hub dev:6-0:1.0 complete after 118.828 msecs [ 1192.248180] PM: resume of drv:hub dev:7-0:1.0 complete after 118.760 msecs [ 1192.248190] PM: resume of drv:hub dev:8-0:1.0 complete after 118.708 msecs [ 1192.248198] PM: resume of drv: dev:ep_00 complete after 118.814 msecs [ 1192.248203] PM: resume of drv: dev:ep_00 complete after 118.688 msecs [ 1192.248205] PM: resume of drv: dev:ep_81 complete after 118.773 msecs [ 1192.248208] PM: resume of drv: dev:ep_81 complete after 118.846 msecs [ 1192.248214] PM: resume of drv: dev:ep_81 complete after 118.714 msecs [ 1192.260148] PM: resume of drv: dev:ep_00 complete after 131.046 msecs [ 1192.260156] PM: resume of drv:hub dev:1-0:1.0 complete after 131.062 msecs [ 1192.260181] PM: resume of drv: dev:ep_00 complete after 131.063 msecs [ 1192.260185] PM: resume of drv:hub dev:2-0:1.0 complete after 131.071 msecs [ 1192.260194] PM: resume of drv: dev:ep_81 complete after 131.096 msecs [ 1192.260198] PM: resume of drv:usb dev:2-4:1.0 complete after 130.413 msecs [ 1192.260202] PM: resume of drv: dev:ep_81 complete after 131.087 msecs [ 1192.260206] PM: resume of drv:cdc_acm dev:2-4:1.1 complete after 130.407 msecs [ 1192.260220] PM: resume of drv: dev:ep_00 complete after 130.070 msecs [ 1192.260223] PM: resume of drv:cdc_acm dev:2-4:1.2 complete after 130.390 msecs [ 1192.260227] PM: resume of drv:cdc_acm dev:2-4:1.10 complete after 130.125 msecs [ 1192.260233] PM: resume of drv:cdc_acm dev:2-4:1.3 complete after 130.351 msecs [ 1192.260244] PM: resume of drv:cdc_acm dev:2-4:1.9 complete after 130.166 msecs [ 1192.260247] PM: resume of drv:cdc_acm dev:2-4:1.4 complete after 130.334 msecs [ 1192.260256] PM: resume of drv:cdc_ether dev:2-4:1.8 complete after 130.199 msecs [ 1192.260261] PM: resume of drv:cdc_wdm dev:2-4:1.5 complete after 130.299 msecs [ 1192.260265] PM: resume of drv:cdc_ether dev:2-4:1.7 complete after 130.240 msecs [ 1192.260267] PM: resume of drv:cdc_wdm dev:2-4:1.6 complete after 130.274 msecs [ 1192.260272] PM: resume of drv: dev:ep_06 complete after 130.153 msecs [ 1192.260274] PM: resume of drv: dev:ep_8a complete after 130.459 msecs [ 1192.260277] PM: resume of drv: dev:ep_86 complete after 130.144 msecs [ 1192.260280] PM: resume of drv: dev:ep_01 complete after 130.430 msecs [ 1192.260283] PM: resume of drv: dev:ep_85 complete after 130.196 msecs [ 1192.260285] PM: resume of drv: dev:ep_81 complete after 130.419 msecs [ 1192.260288] PM: resume of drv: dev:ep_04 complete after 129.850 msecs [ 1192.260290] PM: resume of drv: dev:ep_89 complete after 130.392 msecs [ 1192.260293] PM: resume of drv: dev:ep_84 complete after 129.840 msecs [ 1192.260296] PM: resume of drv: dev:ep_02 complete after 130.366 msecs [ 1192.260299] PM: resume of drv: dev:ep_87 complete after 130.258 msecs [ 1192.260301] PM: resume of drv: dev:ep_82 complete after 130.356 msecs [ 1192.260308] PM: resume of drv: dev:ep_8c complete after 130.300 msecs [ 1192.260310] PM: resume of drv: dev:ep_8b complete after 130.331 msecs [ 1192.356631] PM: resume of drv:i915 dev:0000:00:02.0 complete after 231.708 msecs [ 1192.372101] usb 1-6: reset high speed USB device number 2 using ehci_hcd [ 1192.448137] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1192.453876] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 1192.454717] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 1192.465151] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 1192.466050] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 1192.469956] ata2.00: configured for UDMA/133 [ 1192.515036] PM: resume of drv: dev:ep_00 complete after 385.414 msecs [ 1192.515044] PM: resume of drv:uvcvideo dev:1-6:1.1 complete after 385.439 msecs [ 1192.515051] PM: resume of drv:uvcvideo dev:1-6:1.0 complete after 385.480 msecs [ 1192.515079] PM: resume of drv: dev:ep_83 complete after 385.489 msecs [ 1192.616144] usb 2-1: reset high speed USB device number 2 using ehci_hcd [ 1192.688127] firewire_core: rediscovered device fw0 [ 1192.960128] PM: resume of drv: dev:ep_00 complete after 830.385 msecs [ 1192.960135] PM: resume of drv:hub dev:2-1:1.0 complete after 830.425 msecs [ 1192.960148] PM: resume of drv: dev:ep_81 complete after 830.421 msecs [ 1193.032301] usb 2-1.4: reset high speed USB device number 6 using ehci_hcd [ 1193.196292] usb 2-1.3: reset full speed USB device number 5 using ehci_hcd [ 1193.289436] PM: resume of drv: dev:ep_00 complete after 1159.141 msecs [ 1193.289443] PM: resume of drv:usb dev:2-1.3:1.0 complete after 1159.196 msecs [ 1193.289471] PM: resume of drv: dev:ep_01 complete after 1159.191 msecs [ 1193.289478] PM: resume of drv: dev:ep_81 complete after 1159.215 msecs [ 1193.336060] PM: resume of drv: dev:ep_00 complete after 1205.703 msecs [ 1193.336066] PM: resume of drv:hub dev:2-1.4:1.0 complete after 1205.739 msecs [ 1193.336075] PM: resume of drv: dev:ep_81 complete after 1205.734 msecs [ 1193.548312] usb 2-1.2: reset low speed USB device number 4 using ehci_hcd [ 1193.836335] PM: resume of drv: dev:ep_00 complete after 1706.121 msecs [ 1193.836342] PM: resume of drv:usbhid dev:2-1.2:1.0 complete after 1706.158 msecs [ 1193.836370] PM: resume of drv: dev:ep_81 complete after 1706.170 msecs [ 1194.088313] usb 2-1.4.1: reset low speed USB device number 7 using ehci_hcd [ 1194.372695] PM: resume of drv: dev:ep_00 complete after 2242.272 msecs [ 1194.372701] PM: resume of drv:usbhid dev:2-1.4.1:1.0 complete after 2242.315 msecs [ 1194.372730] PM: resume of drv: dev:ep_81 complete after 2242.327 msecs [ 1194.688128] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1194.689075] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1194.689080] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1194.689204] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [ 1194.689208] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1194.699715] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1194.699719] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1194.699840] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [ 1194.699844] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1194.700812] ata1.00: configured for UDMA/133 [ 1194.721089] PM: resume of drv:sd dev:0:0:0:0 complete after 2591.447 msecs [ 1194.721112] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2523.139 msecs [ 1194.721286] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2591.611 msecs [ 1194.861550] PM: resume of devices complete after 2736.653 msecs [ 1194.861758] PM: resume devices took 2.736 seconds [ 1194.861800] PM: Finishing wakeup. [ 1194.861802] Restarting tasks ... [ 1194.861868] usb 2-4: USB disconnect, device number 3 [ 1194.862742] done. [ 1194.872668] cdc_ether 2-4:1.7: wwan0: unregister 'cdc_ether' usb-0000:00:1d.7-4, Mobile Broadband Network Device [ 1194.914484] video LNXVIDEO:00: Restoring backlight state [ 1194.915894] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1194.915899] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1195.641201] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 1195.766279] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 1195.820087] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 1195.820351] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 1195.874573] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1197.292136] usb 2-4: new high speed USB device number 8 using ehci_hcd [ 1198.154830] cdc_acm 2-4:1.1: ttyACM0: USB ACM device [ 1198.211831] cdc_acm 2-4:1.3: ttyACM1: USB ACM device [ 1198.226858] cdc_wdm 2-4:1.5: cdc-wdm0: USB WDM device [ 1198.242223] cdc_wdm 2-4:1.6: cdc-wdm1: USB WDM device [ 1198.261393] cdc_ether 2-4:1.7: wwan0: register 'cdc_ether' at usb-0000:00:1d.7-4, Mobile Broadband Network Device, 02:80:37:ec:02:00 [ 1198.275184] cdc_acm 2-4:1.9: ttyACM2: USB ACM device [ 1202.377872] wlan0: authenticate with 3c:ea:4f:85:07:d1 (try 1) [ 1202.379906] wlan0: authenticated [ 1202.382225] wlan0: associate with 3c:ea:4f:85:07:d1 (try 1) [ 1202.385314] wlan0: RX AssocResp from 3c:ea:4f:85:07:d1 (capab=0x431 status=0 aid=5) [ 1202.385322] wlan0: associated [ 1202.389167] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 1202.389298] cfg80211: Calling CRDA for country: US [ 1202.394484] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 1202.394488] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 1202.394491] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 1202.394493] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 1202.394496] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 1202.394498] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 1202.394500] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 1202.394503] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 1202.394505] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 1202.394507] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 1202.394510] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 1202.394512] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 1202.394514] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 1202.394517] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 1202.394519] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 1202.394522] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 1202.394524] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 1202.394526] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 1202.394528] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 1202.394531] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 1202.394533] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 1202.394536] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 1202.394538] cfg80211: Disabling freq 2467 MHz [ 1202.394540] cfg80211: Disabling freq 2472 MHz [ 1202.394541] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule: [ 1202.394544] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (300 mBi, 1700 mBm) [ 1202.394546] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule: [ 1202.394549] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (300 mBi, 1700 mBm) [ 1202.394551] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule: [ 1202.394554] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (300 mBi, 1700 mBm) [ 1202.394556] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule: [ 1202.394559] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (300 mBi, 1700 mBm) [ 1202.394561] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule: [ 1202.394563] cfg80211: 5250000 KHz - 5330000 KHz @ KHz), (300 mBi, 2000 mBm) [ 1202.394566] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule: [ 1202.394568] cfg80211: 5250000 KHz - 5330000 KHz @ KHz), (300 mBi, 2000 mBm) [ 1202.394571] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule: [ 1202.394573] cfg80211: 5250000 KHz - 5330000 KHz @ KHz), (300 mBi, 2000 mBm) [ 1202.394575] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule: [ 1202.394578] cfg80211: 5250000 KHz - 5330000 KHz @ KHz), (300 mBi, 2000 mBm) [ 1202.394580] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule: [ 1202.394583] cfg80211: 5490000 KHz - 5600000 KHz @ KHz), (300 mBi, 2000 mBm) [ 1202.394585] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule: [ 1202.394587] cfg80211: 5490000 KHz - 5600000 KHz @ KHz), (300 mBi, 2000 mBm) [ 1202.394590] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule: [ 1202.394592] cfg80211: 5490000 KHz - 5600000 KHz @ KHz), (300 mBi, 2000 mBm) [ 1202.394594] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule: [ 1202.394597] cfg80211: 5490000 KHz - 5600000 KHz @ KHz), (300 mBi, 2000 mBm) [ 1202.394599] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule: [ 1202.394602] cfg80211: 5490000 KHz - 5600000 KHz @ KHz), (300 mBi, 2000 mBm) [ 1202.394604] cfg80211: Disabling freq 5600 MHz [ 1202.394605] cfg80211: Disabling freq 5620 MHz [ 1202.394607] cfg80211: Disabling freq 5640 MHz [ 1202.394608] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule: [ 1202.394611] cfg80211: 5650000 KHz - 5710000 KHz @ KHz), (300 mBi, 2000 mBm) [ 1202.394613] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule: [ 1202.394616] cfg80211: 5650000 KHz - 5710000 KHz @ KHz), (300 mBi, 2000 mBm) [ 1202.394618] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule: [ 1202.394621] cfg80211: 5650000 KHz - 5710000 KHz @ KHz), (300 mBi, 2000 mBm) [ 1202.394623] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule: [ 1202.394626] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (300 mBi, 3000 mBm) [ 1202.394628] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule: [ 1202.394630] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (300 mBi, 3000 mBm) [ 1202.394633] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule: [ 1202.394635] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (300 mBi, 3000 mBm) [ 1202.394637] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule: [ 1202.394640] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (300 mBi, 3000 mBm) [ 1202.394642] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule: [ 1202.394645] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (300 mBi, 3000 mBm) [ 1202.394649] cfg80211: Regulatory domain changed to country: US [ 1202.394651] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1202.394654] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1202.394656] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 1202.394659] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1202.394661] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1202.394663] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1202.394666] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1212.768142] wlan0: no IPv6 routers present [ 1441.430106] generic-usb 0003:04F3:0213.0002: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1441.434084] usb 2-1.4: clear tt 1 (0070) error -71 [ 1441.438478] generic-usb 0003:04F3:0213.0002: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1441.442461] usb 2-1.4: clear tt 1 (0070) error -71 [ 1441.454098] generic-usb 0003:04F3:0213.0002: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1441.458076] usb 2-1.4: clear tt 1 (0070) error -71 [ 1441.462466] generic-usb 0003:04F3:0213.0002: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1441.466447] usb 2-1.4: clear tt 1 (0070) error -71 [ 1441.478087] generic-usb 0003:04F3:0213.0002: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1441.482063] usb 2-1.4: clear tt 1 (0070) error -71 [ 1441.486457] generic-usb 0003:04F3:0213.0002: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1441.490429] usb 2-1.4: clear tt 1 (0070) error -71 [ 1441.502076] generic-usb 0003:04F3:0213.0002: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1441.506049] usb 2-1.4: clear tt 1 (0070) error -71 [ 1441.510443] generic-usb 0003:04F3:0213.0002: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1441.514421] usb 2-1.4: clear tt 1 (0070) error -71 [ 1441.526172] generic-usb 0003:04F3:0213.0002: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1441.530162] usb 2-1.4: clear tt 1 (0070) error -71 [ 1441.542053] generic-usb 0003:04F3:0213.0002: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1441.546030] usb 2-1.4: clear tt 1 (0070) error -71 [ 1441.550419] generic-usb 0003:04F3:0213.0002: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1441.554402] usb 2-1.4: clear tt 1 (0070) error -71 [ 1441.566039] generic-usb 0003:04F3:0213.0002: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1441.570047] usb 2-1.4: clear tt 1 (0070) error -71 [ 1441.574407] generic-usb 0003:04F3:0213.0002: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1441.578390] usb 2-1.4: clear tt 1 (0070) error -71 [ 1441.590032] generic-usb 0003:04F3:0213.0002: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1441.594006] usb 2-1.4: clear tt 1 (0070) error -71 [ 1441.598393] generic-usb 0003:04F3:0213.0002: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1441.602378] usb 2-1.4: clear tt 1 (0070) error -71 [ 1441.614014] generic-usb 0003:04F3:0213.0002: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1441.617997] usb 2-1.4: clear tt 1 (0070) error -71 [ 1441.622387] generic-usb 0003:04F3:0213.0002: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1441.623736] usb 2-1.4: USB disconnect, device number 6 [ 1441.623739] usb 2-1.4.1: USB disconnect, device number 7 [ 1441.626367] usb 2-1.4: clear tt 1 (0070) error -71 [ 1441.844401] usb 2-1.4: new high speed USB device number 9 using ehci_hcd [ 1441.949224] usb 2-1.4: device descriptor read/all, error -71 [ 1441.964837] hub 2-1:1.0: unable to enumerate USB device on port 4 [ 1442.164365] usb 2-1.4: new high speed USB device number 11 using ehci_hcd [ 1442.259708] hub 2-1.4:1.0: USB hub found [ 1442.261040] hub 2-1.4:1.0: 4 ports detected [ 1442.464088] hub 2-1.4:1.0: hub_port_status failed (err = -71) [ 1442.647369] usb 2-1.4: USB disconnect, device number 11 [ 1442.844405] usb 2-1.4: new high speed USB device number 12 using ehci_hcd [ 1442.939742] hub 2-1.4:1.0: USB hub found [ 1442.940954] hub 2-1.4:1.0: 4 ports detected [ 1443.212340] usb 2-1.4.1: new low speed USB device number 13 using ehci_hcd [ 1443.314792] input: USB Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.4/2-1.4.1/2-1.4.1:1.0/input/input15 [ 1443.314929] generic-usb 0003:04F3:0213.0003: input,hidraw1: USB HID v1.11 Mouse [USB Mouse] on usb-0000:00:1d.7-1.4.1/input0 [ 1445.924372] usb 2-1.4.4: new full speed USB device number 14 using ehci_hcd [ 1446.539237] usbcore: registered new interface driver snd-usb-audio [ 1448.704731] generic-usb 0003:04F3:0213.0003: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1448.705699] usb 2-1.4: clear tt 1 (90e1) error -71 [ 1448.709828] usb 2-1.4: clear tt 1 (00d0) error -71 [ 1448.713846] generic-usb 0003:04F3:0213.0003: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1448.713946] usb 2-1.4: clear tt 1 (90e1) error -71 [ 1448.718074] usb 2-1.4: clear tt 1 (00d0) error -71 [ 1448.722097] generic-usb 0003:04F3:0213.0003: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1448.722193] usb 2-1.4: clear tt 1 (90e1) error -71 [ 1448.726317] usb 2-1.4: clear tt 1 (00d0) error -71 [ 1448.730416] generic-usb 0003:04F3:0213.0003: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1448.730440] usb 2-1.4: clear tt 1 (90e1) error -71 [ 1448.734564] usb 2-1.4: clear tt 1 (00d0) error -71 [ 1448.738587] generic-usb 0003:04F3:0213.0003: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1448.738684] usb 2-1.4: clear tt 1 (90e1) error -71 [ 1448.742811] usb 2-1.4: clear tt 1 (00d0) error -71 [ 1448.746912] generic-usb 0003:04F3:0213.0003: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1448.746935] usb 2-1.4: clear tt 1 (90e1) error -71 [ 1448.751057] usb 2-1.4: clear tt 1 (00d0) error -71 [ 1448.755076] generic-usb 0003:04F3:0213.0003: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1448.755175] usb 2-1.4: clear tt 1 (90e1) error -71 [ 1448.759313] usb 2-1.4: clear tt 1 (00d0) error -71 [ 1448.763326] generic-usb 0003:04F3:0213.0003: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1448.767302] usb 2-1.4: clear tt 1 (00d0) error -71 [ 1448.771318] generic-usb 0003:04F3:0213.0003: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1448.775298] usb 2-1.4: clear tt 1 (00d0) error -71 [ 1448.779315] generic-usb 0003:04F3:0213.0003: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1448.783299] usb 2-1.4: clear tt 1 (00d0) error -71 [ 1448.787322] generic-usb 0003:04F3:0213.0003: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1448.788155] usb 2-1.4: USB disconnect, device number 12 [ 1448.788158] usb 2-1.4.1: USB disconnect, device number 13 [ 1448.791291] usb 2-1.4: clear tt 1 (00d0) error -71 [ 1448.816311] usb 2-1.4.4: USB disconnect, device number 14 [ 1449.020318] usb 2-1.4: new high speed USB device number 15 using ehci_hcd [ 1449.116110] hub 2-1.4:1.0: USB hub found [ 1449.118802] hub 2-1.4:1.0: 4 ports detected [ 1449.392381] usb 2-1.4.1: new low speed USB device number 16 using ehci_hcd [ 1449.493956] input: USB Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.4/2-1.4.1/2-1.4.1:1.0/input/input16 [ 1449.494099] generic-usb 0003:04F3:0213.0004: input,hidraw1: USB HID v1.11 Mouse [USB Mouse] on usb-0000:00:1d.7-1.4.1/input0 [ 1449.564422] usb 2-1.4.4: new full speed USB device number 17 using ehci_hcd [ 1452.754673] usb 2-1.4: clear tt 1 (9111) error -71 [ 1452.760314] generic-usb 0003:04F3:0213.0004: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1452.762672] usb 2-1.4: clear tt 1 (9111) error -71 [ 1452.766795] usb 2-1.4: clear tt 1 (0100) error -71 [ 1452.770916] usb 2-1.4: clear tt 1 (9111) error -71 [ 1452.776305] generic-usb 0003:04F3:0213.0004: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1452.778916] usb 2-1.4: clear tt 1 (9111) error -71 [ 1452.783036] usb 2-1.4: clear tt 1 (0100) error -71 [ 1452.787161] usb 2-1.4: clear tt 1 (9111) error -71 [ 1452.792294] generic-usb 0003:04F3:0213.0004: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1452.795157] usb 2-1.4: clear tt 1 (9111) error -71 [ 1452.799277] usb 2-1.4: clear tt 1 (0100) error -71 [ 1452.803403] usb 2-1.4: clear tt 1 (9111) error -71 [ 1452.808422] generic-usb 0003:04F3:0213.0004: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1452.812397] usb 2-1.4: clear tt 1 (0100) error -71 [ 1452.816788] generic-usb 0003:04F3:0213.0004: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1452.820765] usb 2-1.4: clear tt 1 (0100) error -71 [ 1452.832413] generic-usb 0003:04F3:0213.0004: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1452.836383] usb 2-1.4: clear tt 1 (0100) error -71 [ 1452.840777] generic-usb 0003:04F3:0213.0004: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1452.844754] usb 2-1.4: clear tt 1 (0100) error -71 [ 1452.856395] generic-usb 0003:04F3:0213.0004: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1452.860371] usb 2-1.4: clear tt 1 (0100) error -71 [ 1452.864764] generic-usb 0003:04F3:0213.0004: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1452.868743] usb 2-1.4: clear tt 1 (0100) error -71 [ 1452.880386] generic-usb 0003:04F3:0213.0004: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1452.882119] usb 2-1.4: USB disconnect, device number 15 [ 1452.882122] usb 2-1.4.1: USB disconnect, device number 16 [ 1452.884359] usb 2-1.4: clear tt 1 (0100) error -71 [ 1452.910072] usb 2-1.4.4: USB disconnect, device number 17 [ 1453.108388] usb 2-1.4: new high speed USB device number 18 using ehci_hcd [ 1453.203857] hub 2-1.4:1.0: USB hub found [ 1453.205072] hub 2-1.4:1.0: 4 ports detected [ 1453.476333] usb 2-1.4.1: new low speed USB device number 19 using ehci_hcd [ 1453.579195] input: USB Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.4/2-1.4.1/2-1.4.1:1.0/input/input17 [ 1453.579339] generic-usb 0003:04F3:0213.0005: input,hidraw1: USB HID v1.11 Mouse [USB Mouse] on usb-0000:00:1d.7-1.4.1/input0 [ 1453.652368] usb 2-1.4.4: new full speed USB device number 20 using ehci_hcd [ 1453.765066] usb 2-1.4: clear tt 1 (8140) error -71 [ 1453.773044] usb 2-1.4: clear tt 1 (8140) error -71 [ 1453.777054] usb 2-1.4.4: unable to read config index 0 descriptor/all [ 1453.777059] usb 2-1.4.4: can't read configurations, error -71 [ 1453.781035] usb 2-1.4: clear tt 1 (8140) error -71 [ 1453.785178] hub 2-1.4:1.0: cannot disable port 4 (err = -71) [ 1453.789307] hub 2-1.4:1.0: cannot reset port 4 (err = -71) [ 1453.793426] hub 2-1.4:1.0: cannot reset port 4 (err = -71) [ 1453.797545] hub 2-1.4:1.0: cannot reset port 4 (err = -71) [ 1453.801647] hub 2-1.4:1.0: cannot reset port 4 (err = -71) [ 1453.805792] hub 2-1.4:1.0: cannot reset port 4 (err = -71) [ 1453.805795] hub 2-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad? [ 1453.809917] hub 2-1.4:1.0: cannot disable port 4 (err = -71) [ 1453.814043] hub 2-1.4:1.0: cannot reset port 4 (err = -71) [ 1453.818162] hub 2-1.4:1.0: cannot reset port 4 (err = -71) [ 1453.822290] hub 2-1.4:1.0: cannot reset port 4 (err = -71) [ 1453.826407] hub 2-1.4:1.0: cannot reset port 4 (err = -71) [ 1453.830535] hub 2-1.4:1.0: cannot reset port 4 (err = -71) [ 1453.830539] hub 2-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad? [ 1453.834659] hub 2-1.4:1.0: cannot disable port 4 (err = -71) [ 1453.838786] hub 2-1.4:1.0: cannot reset port 4 (err = -71) [ 1453.842903] hub 2-1.4:1.0: cannot reset port 4 (err = -71) [ 1453.847021] hub 2-1.4:1.0: cannot reset port 4 (err = -71) [ 1453.851150] hub 2-1.4:1.0: cannot reset port 4 (err = -71) [ 1453.855274] hub 2-1.4:1.0: cannot reset port 4 (err = -71) [ 1453.855278] hub 2-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad? [ 1453.859397] hub 2-1.4:1.0: cannot disable port 4 (err = -71) [ 1453.859405] hub 2-1.4:1.0: unable to enumerate USB device on port 4 [ 1453.863521] hub 2-1.4:1.0: cannot disable port 4 (err = -71) [ 1453.905738] usb 2-1.4: USB disconnect, device number 18 [ 1453.905741] usb 2-1.4.1: USB disconnect, device number 19 [ 1454.128380] usb 2-1.4: new high speed USB device number 24 using ehci_hcd [ 1454.223727] hub 2-1.4:1.0: USB hub found [ 1454.224941] hub 2-1.4:1.0: 4 ports detected [ 1454.496322] usb 2-1.4.1: new low speed USB device number 25 using ehci_hcd [ 1454.599269] input: USB Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.4/2-1.4.1/2-1.4.1:1.0/input/input18 [ 1454.599407] generic-usb 0003:04F3:0213.0006: input,hidraw1: USB HID v1.11 Mouse [USB Mouse] on usb-0000:00:1d.7-1.4.1/input0 [ 1454.672360] usb 2-1.4.4: new full speed USB device number 26 using ehci_hcd [ 1455.496557] usb 2-1.4: clear tt 1 (91a1) error -71 [ 1455.504549] usb 2-1.4: clear tt 1 (91a1) error -71 [ 1455.505939] generic-usb 0003:04F3:0213.0006: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1455.509920] usb 2-1.4: clear tt 1 (0190) error -71 [ 1455.514047] usb 2-1.4: clear tt 1 (91a1) error -71 [ 1455.521943] generic-usb 0003:04F3:0213.0006: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1455.522032] usb 2-1.4: clear tt 1 (91a1) error -71 [ 1455.526161] usb 2-1.4: clear tt 1 (0190) error -71 [ 1455.530307] generic-usb 0003:04F3:0213.0006: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1455.530315] usb 2-1.4: clear tt 1 (91a1) error -71 [ 1455.534534] usb 2-1.4: clear tt 1 (0190) error -71 [ 1455.538659] usb 2-1.4: clear tt 1 (91a1) error -71 [ 1455.545926] generic-usb 0003:04F3:0213.0006: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1455.546647] usb 2-1.4: clear tt 1 (91a1) error -71 [ 1455.550778] usb 2-1.4: clear tt 1 (0190) error -71 [ 1455.562047] generic-usb 0003:04F3:0213.0006: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1455.566017] usb 2-1.4: clear tt 1 (0190) error -71 [ 1455.570410] generic-usb 0003:04F3:0213.0006: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1455.574390] usb 2-1.4: clear tt 1 (0190) error -71 [ 1455.586031] generic-usb 0003:04F3:0213.0006: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1455.590009] usb 2-1.4: clear tt 1 (0190) error -71 [ 1455.594403] generic-usb 0003:04F3:0213.0006: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1455.598379] usb 2-1.4: clear tt 1 (0190) error -71 [ 1455.610021] generic-usb 0003:04F3:0213.0006: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1455.613996] usb 2-1.4: clear tt 1 (0190) error -71 [ 1455.618391] generic-usb 0003:04F3:0213.0006: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1455.622365] usb 2-1.4: clear tt 1 (0190) error -71 [ 1455.634005] generic-usb 0003:04F3:0213.0006: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1455.637982] usb 2-1.4: clear tt 1 (0190) error -71 [ 1455.642380] generic-usb 0003:04F3:0213.0006: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1455.646349] usb 2-1.4: clear tt 1 (0190) error -71 [ 1455.650475] usb 2-1.4: clear tt 1 (91a1) error -71 [ 1455.657875] generic-usb 0003:04F3:0213.0006: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1455.658464] usb 2-1.4: clear tt 1 (91a1) error -71 [ 1455.662595] usb 2-1.4: clear tt 1 (0190) error -71 [ 1455.666718] usb 2-1.4: clear tt 1 (91a1) error -71 [ 1455.673873] generic-usb 0003:04F3:0213.0006: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1455.674706] usb 2-1.4: clear tt 1 (91a1) error -71 [ 1455.678837] usb 2-1.4: clear tt 1 (0190) error -71 [ 1455.682964] usb 2-1.4: clear tt 1 (91a1) error -71 [ 1455.689853] generic-usb 0003:04F3:0213.0006: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1455.690823] usb 2-1.4: clear tt 1 (91a1) error -71 [ 1455.694953] usb 2-1.4: clear tt 1 (0190) error -71 [ 1455.696714] usb 2-1.4: USB disconnect, device number 24 [ 1455.696717] usb 2-1.4.1: USB disconnect, device number 25 [ 1455.699079] usb 2-1.4: clear tt 1 (91a1) error -71 [ 1455.722466] usb 2-1.4.4: USB disconnect, device number 26 [ 1455.920351] usb 2-1.4: new high speed USB device number 27 using ehci_hcd [ 1456.015700] hub 2-1.4:1.0: USB hub found [ 1456.016917] hub 2-1.4:1.0: 4 ports detected [ 1456.288289] usb 2-1.4.1: new low speed USB device number 28 using ehci_hcd [ 1456.390858] input: USB Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.4/2-1.4.1/2-1.4.1:1.0/input/input19 [ 1456.391011] generic-usb 0003:04F3:0213.0007: input,hidraw1: USB HID v1.11 Mouse [USB Mouse] on usb-0000:00:1d.7-1.4.1/input0 [ 1456.460332] usb 2-1.4.4: new full speed USB device number 29 using ehci_hcd [ 1459.210332] usb 2-1.4: clear tt 1 (91d1) error -71 [ 1459.218096] generic-usb 0003:04F3:0213.0007: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1459.218308] usb 2-1.4: clear tt 1 (91d1) error -71 [ 1459.222433] usb 2-1.4: clear tt 1 (01c0) error -71 [ 1459.226563] usb 2-1.4: clear tt 1 (91d1) error -71 [ 1459.234097] generic-usb 0003:04F3:0213.0007: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1459.234550] usb 2-1.4: clear tt 1 (91d1) error -71 [ 1459.238675] usb 2-1.4: clear tt 1 (01c0) error -71 [ 1459.242812] usb 2-1.4: clear tt 1 (91d1) error -71 [ 1459.250070] generic-usb 0003:04F3:0213.0007: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1459.250791] usb 2-1.4: clear tt 1 (91d1) error -71 [ 1459.254921] usb 2-1.4: clear tt 1 (01c0) error -71 [ 1459.259042] usb 2-1.4: clear tt 1 (91d1) error -71 [ 1459.266181] generic-usb 0003:04F3:0213.0007: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1459.270163] usb 2-1.4: clear tt 1 (01c0) error -71 [ 1459.274561] generic-usb 0003:04F3:0213.0007: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1459.278534] usb 2-1.4: clear tt 1 (01c0) error -71 [ 1459.278773] usb 2-1.4: USB disconnect, device number 27 [ 1459.278775] usb 2-1.4.1: USB disconnect, device number 28 [ 1459.308282] usb 2-1.4.4: USB disconnect, device number 29 [ 1459.512303] usb 2-1.4: new high speed USB device number 30 using ehci_hcd [ 1459.607653] hub 2-1.4:1.0: USB hub found [ 1459.608872] hub 2-1.4:1.0: 4 ports detected [ 1459.880366] usb 2-1.4.1: new low speed USB device number 31 using ehci_hcd [ 1459.983559] input: USB Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.4/2-1.4.1/2-1.4.1:1.0/input/input20 [ 1459.983715] generic-usb 0003:04F3:0213.0008: input,hidraw1: USB HID v1.11 Mouse [USB Mouse] on usb-0000:00:1d.7-1.4.1/input0 [ 1460.056280] usb 2-1.4.4: new full speed USB device number 32 using ehci_hcd [ 1460.385233] usb 2-1.4: clear tt 1 (9201) error -71 [ 1460.393228] usb 2-1.4: clear tt 1 (9201) error -71 [ 1460.395505] generic-usb 0003:04F3:0213.0008: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1460.399480] usb 2-1.4: clear tt 1 (01f0) error -71 [ 1460.401348] 32:2:1: usb_set_interface failed [ 1460.403599] usb 2-1.4: clear tt 1 (9201) error -71 [ 1460.407716] usb 2-1.4: clear tt 1 (0200) error -71 [ 1460.411490] generic-usb 0003:04F3:0213.0008: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1460.411710] 32:2:1: usb_set_interface failed [ 1460.411834] usb 2-1.4: clear tt 1 (9201) error -71 [ 1460.415971] usb 2-1.4: clear tt 1 (01f0) error -71 [ 1460.420095] usb 2-1.4: clear tt 1 (0200) error -71 [ 1460.424135] 32:2:1: usb_set_interface failed [ 1460.424682] usb 2-1.4: clear tt 1 (9201) error -71 [ 1460.427489] generic-usb 0003:04F3:0213.0008: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1460.428709] usb 2-1.4: clear tt 1 (0200) error -71 [ 1460.432714] 32:2:1: usb_set_interface failed [ 1460.433245] usb 2-1.4: clear tt 1 (01f0) error -71 [ 1460.437205] usb 2-1.4: clear tt 1 (9201) error -71 [ 1460.441330] usb 2-1.4: clear tt 1 (0200) error -71 [ 1460.443473] generic-usb 0003:04F3:0213.0008: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1460.445327] 32:2:1: usb_set_interface failed [ 1460.445740] usb 2-1.4: clear tt 1 (9201) error -71 [ 1460.449703] usb 2-1.4: clear tt 1 (01f0) error -71 [ 1460.453823] usb 2-1.4: clear tt 1 (0200) error -71 [ 1460.457838] 32:2:1: usb_set_interface failed [ 1460.459463] generic-usb 0003:04F3:0213.0008: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1460.461817] usb 2-1.4: clear tt 1 (0200) error -71 [ 1460.465824] 32:2:1: usb_set_interface failed [ 1460.465937] usb 2-1.4: clear tt 1 (01f0) error -71 [ 1460.470067] usb 2-1.4: clear tt 1 (0200) error -71 [ 1460.474076] 32:2:1: usb_set_interface failed [ 1460.475454] generic-usb 0003:04F3:0213.0008: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1460.478060] usb 2-1.4: clear tt 1 (0200) error -71 [ 1460.482058] 32:2:1: usb_set_interface failed [ 1460.482558] usb 2-1.4: clear tt 1 (01f0) error -71 [ 1460.486559] usb 2-1.4: clear tt 1 (0200) error -71 [ 1460.490580] 32:2:1: usb_set_interface failed [ 1460.491443] generic-usb 0003:04F3:0213.0008: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1460.494553] usb 2-1.4: clear tt 1 (0200) error -71 [ 1460.498556] 32:2:1: usb_set_interface failed [ 1460.498669] usb 2-1.4: clear tt 1 (01f0) error -71 [ 1460.502799] usb 2-1.4: clear tt 1 (0200) error -71 [ 1460.506812] 32:2:1: usb_set_interface failed [ 1460.507433] generic-usb 0003:04F3:0213.0008: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1460.510794] usb 2-1.4: clear tt 1 (0200) error -71 [ 1460.514798] 32:2:1: usb_set_interface failed [ 1460.515320] usb 2-1.4: clear tt 1 (01f0) error -71 [ 1460.519293] usb 2-1.4: clear tt 1 (0200) error -71 [ 1460.523303] 32:2:1: usb_set_interface failed [ 1460.523869] generic-usb 0003:04F3:0213.0008: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1460.527291] usb 2-1.4: clear tt 1 (0200) error -71 [ 1460.531286] 32:2:1: usb_set_interface failed [ 1460.532034] usb 2-1.4: clear tt 1 (01f0) error -71 [ 1460.536035] usb 2-1.4: clear tt 1 (0200) error -71 [ 1460.539432] generic-usb 0003:04F3:0213.0008: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1460.540161] 32:2:1: usb_set_interface failed [ 1460.543406] usb 2-1.4: clear tt 1 (01f0) error -71 [ 1460.547529] usb 2-1.4: clear tt 1 (0200) error -71 [ 1460.551518] 32:2:1: usb_set_interface failed [ 1460.551689] usb 2-1.4: clear tt 1 (9201) error -71 [ 1460.555411] generic-usb 0003:04F3:0213.0008: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1460.555762] usb 2-1.4: clear tt 1 (0200) error -71 [ 1460.558136] usb 2-1.4: USB disconnect, device number 30 [ 1460.558140] usb 2-1.4.1: USB disconnect, device number 31 [ 1460.559763] 32:2:1: usb_set_interface failed [ 1460.560329] 32:2:1: usb_set_interface failed [ 1460.560686] 32:2:1: usb_set_interface failed [ 1460.560997] usb 2-1.4: clear tt 1 (01f0) error -71 [ 1460.561001] usb 2-1.4: clear tt 1 (9201) error -19 [ 1460.561004] usb 2-1.4: clear tt 1 (0200) error -19 [ 1460.565024] usb 2-1.4: clear tt 1 (9201) error -19 [ 1460.569137] usb 2-1.4: clear tt 1 (9201) error -19 [ 1460.573260] usb 2-1.4: clear tt 1 (9201) error -19 [ 1460.577389] usb 2-1.4: clear tt 1 (9201) error -19 [ 1460.581506] usb 2-1.4: clear tt 1 (9201) error -19 [ 1460.592281] usb 2-1.4.4: USB disconnect, device number 32 [ 1460.595244] -215717888:2:1: usb_set_interface failed [ 1460.800282] usb 2-1.4: new high speed USB device number 33 using ehci_hcd [ 1460.895638] hub 2-1.4:1.0: USB hub found [ 1460.896973] hub 2-1.4:1.0: 4 ports detected [ 1461.168353] usb 2-1.4.1: new low speed USB device number 34 using ehci_hcd [ 1461.271371] input: USB Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.4/2-1.4.1/2-1.4.1:1.0/input/input21 [ 1461.271504] generic-usb 0003:04F3:0213.0009: input,hidraw1: USB HID v1.11 Mouse [USB Mouse] on usb-0000:00:1d.7-1.4.1/input0 [ 1461.344376] usb 2-1.4.4: new full speed USB device number 35 using ehci_hcd [ 1465.880982] usb 2-1.4: clear tt 1 (9231) error -71 [ 1465.888974] usb 2-1.4: clear tt 1 (9231) error -71 [ 1465.890737] generic-usb 0003:04F3:0213.0009: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1465.894719] usb 2-1.4: clear tt 1 (0220) error -71 [ 1465.898841] usb 2-1.4: clear tt 1 (9231) error -71 [ 1465.906728] generic-usb 0003:04F3:0213.0009: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1465.906834] usb 2-1.4: clear tt 1 (9231) error -71 [ 1465.910958] usb 2-1.4: clear tt 1 (0220) error -71 [ 1465.915098] generic-usb 0003:04F3:0213.0009: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1465.915104] usb 2-1.4: clear tt 1 (9231) error -71 [ 1465.919330] usb 2-1.4: clear tt 1 (0220) error -71 [ 1465.923452] usb 2-1.4: clear tt 1 (9231) error -71 [ 1465.930730] generic-usb 0003:04F3:0213.0009: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1465.931449] usb 2-1.4: clear tt 1 (9231) error -71 [ 1465.931581] usb 2-1.4: USB disconnect, device number 33 [ 1465.931584] usb 2-1.4.1: USB disconnect, device number 34 [ 1465.935574] usb 2-1.4: clear tt 1 (0220) error -71 [ 1465.956266] usb 2-1.4.4: USB disconnect, device number 35 [ 1466.156372] usb 2-1.4: new high speed USB device number 36 using ehci_hcd [ 1466.252195] hub 2-1.4:1.0: USB hub found [ 1466.253420] hub 2-1.4:1.0: 4 ports detected [ 1466.524315] usb 2-1.4.1: new low speed USB device number 37 using ehci_hcd [ 1466.627093] input: USB Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.4/2-1.4.1/2-1.4.1:1.0/input/input22 [ 1466.627238] generic-usb 0003:04F3:0213.000A: input,hidraw1: USB HID v1.11 Mouse [USB Mouse] on usb-0000:00:1d.7-1.4.1/input0 [ 1466.700352] usb 2-1.4.4: new full speed USB device number 38 using ehci_hcd [ 1467.042402] usb 2-1.4: clear tt 1 (9261) error -71 [ 1467.048120] 38:2:1: usb_set_interface failed [ 1467.050397] usb 2-1.4: clear tt 1 (9261) error -71 [ 1467.052169] generic-usb 0003:04F3:0213.000A: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1467.054515] usb 2-1.4: clear tt 1 (0260) error -71 [ 1467.058513] 38:2:1: usb_set_interface failed [ 1467.058636] usb 2-1.4: clear tt 1 (0250) error -71 [ 1467.062762] usb 2-1.4: clear tt 1 (9261) error -71 [ 1467.066893] usb 2-1.4: clear tt 1 (0260) error -71 [ 1467.068156] generic-usb 0003:04F3:0213.000A: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1467.070891] 38:2:1: usb_set_interface failed [ 1467.071338] usb 2-1.4: clear tt 1 (9261) error -71 [ 1467.075387] usb 2-1.4: clear tt 1 (0250) error -71 [ 1467.079398] generic-usb 0003:04F3:0213.000A: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1467.079506] usb 2-1.4: clear tt 1 (0260) error -71 [ 1467.083508] 38:2:1: usb_set_interface failed [ 1467.083918] usb 2-1.4: clear tt 1 (9261) error -71 [ 1467.087882] usb 2-1.4: clear tt 1 (0250) error -71 [ 1467.091895] generic-usb 0003:04F3:0213.000A: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1467.092013] usb 2-1.4: clear tt 1 (0260) error -71 [ 1467.096015] 38:2:1: usb_set_interface failed [ 1467.096387] usb 2-1.4: clear tt 1 (9261) error -71 [ 1467.100375] usb 2-1.4: clear tt 1 (0250) error -71 [ 1467.104494] usb 2-1.4: clear tt 1 (0260) error -71 [ 1467.108133] generic-usb 0003:04F3:0213.000A: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1467.108493] 38:2:1: usb_set_interface failed [ 1467.108618] usb 2-1.4: clear tt 1 (9261) error -71 [ 1467.112742] usb 2-1.4: clear tt 1 (0250) error -71 [ 1467.116753] generic-usb 0003:04F3:0213.000A: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1467.116864] usb 2-1.4: clear tt 1 (0260) error -71 [ 1467.120864] 38:2:1: usb_set_interface failed [ 1467.120987] usb 2-1.4: clear tt 1 (0250) error -71 [ 1467.124998] generic-usb 0003:04F3:0213.000A: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1467.125109] usb 2-1.4: clear tt 1 (0260) error -71 [ 1467.129109] 38:2:1: usb_set_interface failed [ 1467.129493] usb 2-1.4: clear tt 1 (0250) error -71 [ 1467.133486] usb 2-1.4: clear tt 1 (0260) error -71 [ 1467.133506] generic-usb 0003:04F3:0213.000A: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1467.137479] 38:2:1: usb_set_interface failed [ 1467.137845] usb 2-1.4: clear tt 1 (0250) error -71 [ 1467.141856] usb 2-1.4: clear tt 1 (0260) error -71 [ 1467.141877] generic-usb 0003:04F3:0213.000A: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1467.145851] 38:2:1: usb_set_interface failed [ 1467.145971] usb 2-1.4: clear tt 1 (0250) error -71 [ 1467.149988] generic-usb 0003:04F3:0213.000A: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1467.150098] usb 2-1.4: clear tt 1 (0260) error -71 [ 1467.154096] 38:2:1: usb_set_interface failed [ 1467.154222] usb 2-1.4: clear tt 1 (0250) error -71 [ 1467.158232] generic-usb 0003:04F3:0213.000A: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1467.158343] usb 2-1.4: clear tt 1 (0260) error -71 [ 1467.162342] 38:2:1: usb_set_interface failed [ 1467.162465] usb 2-1.4: clear tt 1 (0250) error -71 [ 1467.166478] generic-usb 0003:04F3:0213.000A: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1467.166589] usb 2-1.4: clear tt 1 (0260) error -71 [ 1467.170589] 38:2:1: usb_set_interface failed [ 1467.170709] usb 2-1.4: clear tt 1 (0250) error -71 [ 1467.174729] generic-usb 0003:04F3:0213.000A: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1467.174836] usb 2-1.4: clear tt 1 (0260) error -71 [ 1467.178836] 38:2:1: usb_set_interface failed [ 1467.178955] usb 2-1.4: clear tt 1 (0250) error -71 [ 1467.182975] generic-usb 0003:04F3:0213.000A: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1467.183081] usb 2-1.4: clear tt 1 (0260) error -71 [ 1467.186955] 38:2:1: usb_set_interface failed [ 1467.187076] usb 2-1.4: clear tt 1 (0250) error -71 [ 1467.191093] generic-usb 0003:04F3:0213.000A: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1467.191202] usb 2-1.4: clear tt 1 (0260) error -71 [ 1467.195200] 38:2:1: usb_set_interface failed [ 1467.195325] usb 2-1.4: clear tt 1 (0250) error -71 [ 1467.199339] generic-usb 0003:04F3:0213.000A: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1467.199448] usb 2-1.4: clear tt 1 (0260) error -71 [ 1467.203447] 38:2:1: usb_set_interface failed [ 1467.203568] usb 2-1.4: clear tt 1 (0250) error -71 [ 1467.207585] generic-usb 0003:04F3:0213.000A: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1467.207693] usb 2-1.4: clear tt 1 (0260) error -71 [ 1467.210817] usb 2-1.4: USB disconnect, device number 36 [ 1467.210819] usb 2-1.4.1: USB disconnect, device number 37 [ 1467.211692] 38:2:1: usb_set_interface failed [ 1467.211934] usb 2-1.4: clear tt 1 (9261) error -71 [ 1467.211938] usb 2-1.4: clear tt 1 (0250) error -19 [ 1467.211941] usb 2-1.4: clear tt 1 (0260) error -19 [ 1467.215946] generic-usb 0003:04F3:0213.000A: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1467.215952] usb 2-1.4: clear tt 1 (0250) error -19 [ 1467.215955] usb 2-1.4: clear tt 1 (9261) error -19 [ 1467.220185] usb 2-1.4: clear tt 1 (9261) error -19 [ 1467.224310] usb 2-1.4: clear tt 1 (9261) error -19 [ 1467.228433] usb 2-1.4: clear tt 1 (9261) error -19 [ 1467.232428] usb 2-1.4: clear tt 1 (9261) error -19 [ 1467.236184] 38:2:1: usb_set_interface failed [ 1467.236250] usb 2-1.4.4: USB disconnect, device number 38 [ 1467.440350] usb 2-1.4: new high speed USB device number 39 using ehci_hcd [ 1467.535688] hub 2-1.4:1.0: USB hub found [ 1467.536902] hub 2-1.4:1.0: 4 ports detected [ 1467.808294] usb 2-1.4.1: new low speed USB device number 40 using ehci_hcd [ 1467.910697] input: USB Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.4/2-1.4.1/2-1.4.1:1.0/input/input23 [ 1467.910821] generic-usb 0003:04F3:0213.000B: input,hidraw1: USB HID v1.11 Mouse [USB Mouse] on usb-0000:00:1d.7-1.4.1/input0 [ 1467.980333] usb 2-1.4.4: new full speed USB device number 41 using ehci_hcd [ 1469.861140] generic-usb 0003:04F3:0213.000B: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1469.862993] usb 2-1.4: clear tt 1 (9291) error -71 [ 1469.867116] usb 2-1.4: clear tt 1 (0280) error -71 [ 1469.871132] generic-usb 0003:04F3:0213.000B: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1469.871237] usb 2-1.4: clear tt 1 (9291) error -71 [ 1469.875362] usb 2-1.4: clear tt 1 (0280) error -71 [ 1469.879376] generic-usb 0003:04F3:0213.000B: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1469.879483] usb 2-1.4: clear tt 1 (9291) error -71 [ 1469.883606] usb 2-1.4: clear tt 1 (0280) error -71 [ 1469.887629] generic-usb 0003:04F3:0213.000B: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1469.887730] usb 2-1.4: clear tt 1 (9291) error -71 [ 1469.891857] usb 2-1.4: clear tt 1 (0280) error -71 [ 1469.895873] generic-usb 0003:04F3:0213.000B: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1469.895975] usb 2-1.4: clear tt 1 (9291) error -71 [ 1469.900102] usb 2-1.4: clear tt 1 (0280) error -71 [ 1469.904135] generic-usb 0003:04F3:0213.000B: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1469.904222] usb 2-1.4: clear tt 1 (9291) error -71 [ 1469.908349] usb 2-1.4: clear tt 1 (0280) error -71 [ 1469.912362] generic-usb 0003:04F3:0213.000B: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1469.912467] usb 2-1.4: clear tt 1 (9291) error -71 [ 1469.916592] usb 2-1.4: clear tt 1 (0280) error -71 [ 1469.920608] generic-usb 0003:04F3:0213.000B: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1469.924589] usb 2-1.4: clear tt 1 (0280) error -71 [ 1469.940855] generic-usb 0003:04F3:0213.000B: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1469.944830] usb 2-1.4: clear tt 1 (0280) error -71 [ 1469.949221] generic-usb 0003:04F3:0213.000B: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1469.953200] usb 2-1.4: clear tt 1 (0280) error -71 [ 1469.957215] generic-usb 0003:04F3:0213.000B: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1469.961194] usb 2-1.4: clear tt 1 (0280) error -71 [ 1469.965213] generic-usb 0003:04F3:0213.000B: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1469.969189] usb 2-1.4: clear tt 1 (0280) error -71 [ 1469.973211] generic-usb 0003:04F3:0213.000B: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1469.977187] usb 2-1.4: clear tt 1 (0280) error -71 [ 1469.981204] generic-usb 0003:04F3:0213.000B: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1469.985183] usb 2-1.4: clear tt 1 (0280) error -71 [ 1469.989198] generic-usb 0003:04F3:0213.000B: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1469.993061] usb 2-1.4: clear tt 1 (0280) error -71 [ 1469.997068] generic-usb 0003:04F3:0213.000B: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1470.001056] usb 2-1.4: clear tt 1 (0280) error -71 [ 1470.005068] generic-usb 0003:04F3:0213.000B: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1470.009054] usb 2-1.4: clear tt 1 (0280) error -71 [ 1470.013067] generic-usb 0003:04F3:0213.000B: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1470.016170] usb 2-1.4: clear tt 1 (9291) error -71 [ 1470.020291] usb 2-1.4: clear tt 1 (0280) error -71 [ 1470.024306] generic-usb 0003:04F3:0213.000B: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1470.024410] usb 2-1.4: clear tt 1 (9291) error -71 [ 1470.025407] usb 2-1.4: USB disconnect, device number 39 [ 1470.025409] usb 2-1.4.1: USB disconnect, device number 40 [ 1470.028540] usb 2-1.4: clear tt 1 (0280) error -71 [ 1470.028545] usb 2-1.4: clear tt 1 (9291) error -19 [ 1470.032545] generic-usb 0003:04F3:0213.000B: can't reset device, 0000:00:1d.7-1.4.1/input0, status -71 [ 1470.032551] usb 2-1.4: clear tt 1 (9291) error -19 [ 1470.032554] usb 2-1.4: clear tt 1 (0280) error -19 [ 1470.036658] usb 2-1.4: clear tt 1 (9291) error -19 [ 1470.041188] usb 2-1.4: clear tt 1 (9291) error -19 [ 1470.045156] usb 2-1.4: clear tt 1 (9291) error -19 [ 1470.064974] usb 2-1.4.4: USB disconnect, device number 41 [ 1470.268316] usb 2-1.4: new high speed USB device number 42 using ehci_hcd [ 1470.756044] usb 2-1.4: device not accepting address 42, error -71 [ 1470.772927] hub 2-1:1.0: unable to enumerate USB device on port 4 [ 1470.972329] usb 2-1.4: new high speed USB device number 44 using ehci_hcd [ 1471.068026] hub 2-1.4:1.0: USB hub found [ 1471.069257] hub 2-1.4:1.0: 4 ports detected [ 1471.340395] usb 2-1.4.1: new low speed USB device number 45 using ehci_hcd [ 1471.442693] input: USB Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.4/2-1.4.1/2-1.4.1:1.0/input/input24 [ 1471.442815] generic-usb 0003:04F3:0213.000C: input,hidraw1: USB HID v1.11 Mouse [USB Mouse] on usb-0000:00:1d.7-1.4.1/input0 [ 1480.220075] usb 3-1: new full speed USB device number 2 using uhci_hcd [ 1733.020706] show_signal_msg: 12 callbacks suppressed [ 1733.020710] unity_support_t[6005]: segfault at 46 ip 001c1f82 sp bf8cd1e4 error 4 in libc-2.13.so[164000+176000] [ 1773.549079] unity_support_t[6654]: segfault at 46 ip 0036cf82 sp bfe11cf4 error 4 in libc-2.13.so[30f000+176000] [ 2025.015413] wlan0: deauthenticating from 3c:ea:4f:85:07:d1 by local choice (reason=3) [ 2025.025620] cfg80211: All devices are disconnected, going to restore regulatory settings [ 2025.025631] cfg80211: Restoring regulatory settings [ 2025.025641] cfg80211: Calling CRDA to update world regulatory domain [ 2025.049131] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 2025.049136] cfg80211: World regulatory domain updated: [ 2025.049138] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2025.049141] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2025.049144] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2025.049146] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2025.049149] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2025.049151] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2026.933235] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 2027.565481] PM: Syncing filesystems ... done. [ 2027.584658] PM: Preparing system for mem sleep [ 2027.812778] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 2027.828142] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 2027.844138] PM: Entering mem sleep [ 2027.844207] Suspending console(s) (use no_console_suspend to debug) [ 2027.952074] usb_submit_urb: -113 [ 2027.952077] usb_submit_urb: -113 [ 2027.952079] usb_submit_urb: -113 [ 2027.952081] usb_submit_urb: -113 [ 2027.952083] usb_submit_urb: -113 [ 2027.952085] usb_submit_urb: -113 [ 2027.952087] usb_submit_urb: -113 [ 2028.010337] PM: suspend of drv:psmouse dev:serio2 complete after 165.310 msecs [ 2028.010555] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 2028.011074] sd 0:0:0:0: [sda] Stopping disk [ 2028.101245] ACPI handle has no context! [ 2028.101255] sdhci-pci 0000:15:00.2: PCI INT C disabled [ 2028.101262] ACPI handle has no context! [ 2028.101361] ehci_hcd 0000:00:1d.7: PCI INT D disabled [ 2028.101385] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 2028.101395] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 2028.101399] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 2028.101411] pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY [ 2028.101414] pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY [ 2028.101428] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY [ 2028.101430] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY [ 2028.101450] ehci_hcd 0000:00:1a.7: PCI INT D disabled [ 2028.101460] uhci_hcd 0000:00:1a.2: PCI INT C disabled [ 2028.101470] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 2028.101480] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 2028.101667] e1000e 0000:00:19.0: PME# enabled [ 2028.101675] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [ 2028.101850] ACPI handle has no context! [ 2028.108059] ACPI handle has no context! [ 2028.116051] i915 0000:00:02.0: power state changed by ACPI to D3 [ 2028.204356] HDA Intel 0000:00:1b.0: PCI INT B disabled [ 2028.220017] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 118.583 msecs [ 2028.320144] PM: suspend of drv:sd dev:0:0:0:0 complete after 309.592 msecs [ 2028.320159] PM: suspend of drv:scsi dev:target0:0:0 complete after 309.573 msecs [ 2028.320171] PM: suspend of drv:scsi dev:host0 complete after 309.502 msecs [ 2028.336018] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 235.470 msecs [ 2028.336033] PM: suspend of drv: dev:pci0000:00 complete after 234.073 msecs [ 2028.336039] PM: suspend of devices complete after 491.375 msecs [ 2028.336041] PM: suspend devices took 0.492 seconds [ 2028.384018] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [ 2028.384120] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [ 2028.400017] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3 [ 2028.400056] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D3 [ 2028.420021] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [ 2028.436180] PM: late suspend of devices complete after 100.135 msecs [ 2028.436552] ACPI: Preparing to enter system sleep state S3 [ 2028.596057] PM: Saving platform NVS memory [ 2028.597337] Disabling non-boot CPUs ... [ 2028.700027] CPU 1 is now offline [ 2028.700376] Extended CMOS year: 2000 [ 2028.700376] ACPI: Low-level resume complete [ 2028.700376] PM: Restoring platform NVS memory [ 2028.700376] Extended CMOS year: 2000 [ 2028.700376] Enabling non-boot CPUs ... [ 2028.700376] Booting Node 0 Processor 1 APIC 0x1 [ 2028.700376] smpboot cpu 1: start_ip = 9a000 [ 2028.598657] Initializing CPU#1 [ 2028.598657] Disabled fast string operations [ 2028.792013] Switched to NOHz mode on CPU #1 [ 2028.852134] CPU1 is up [ 2028.853680] ACPI: Waking up from system sleep state S3 [ 2029.216219] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 2029.216245] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [ 2029.216258] mei 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 2029.216269] mei 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006) [ 2029.216283] serial 0000:00:03.3: restoring config space at offset 0xf (was 0x200, writing 0x20b) [ 2029.236020] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 2029.236024] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 2029.236053] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 2029.236066] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 2029.236069] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 2029.236100] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 2029.236115] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 2029.236118] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 2029.236146] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 2029.236158] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 2029.236160] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 2029.236199] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 2029.236217] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 2029.236221] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 2029.236262] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [ 2029.236303] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0xbc51bc41) [ 2029.236308] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0xbc30bc20) [ 2029.236313] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x9090) [ 2029.236325] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 2029.236385] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0xbc11bc01) [ 2029.236391] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x8080) [ 2029.236404] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 2029.236473] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 2029.236542] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 2029.236580] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 2029.236582] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 2029.236611] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 2029.236623] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 2029.236626] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 2029.236657] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 2029.236696] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 2029.236743] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 2029.236762] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 2029.236766] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 2029.236891] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 2029.237025] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) [ 2029.252021] firewire_ohci 0000:15:00.1: BAR 0: set to [mem 0xf4801000-0xf48017ff] (PCI address [0xf4801000-0xf48017ff]) [ 2029.252056] firewire_ohci 0000:15:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [ 2029.252064] firewire_ohci 0000:15:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [ 2029.268019] sdhci-pci 0000:15:00.2: BAR 0: set to [mem 0xf4801800-0xf48018ff] (PCI address [0xf4801800-0xf48018ff]) [ 2029.268053] sdhci-pci 0000:15:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [ 2029.268061] sdhci-pci 0000:15:00.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [ 2029.284019] r852 0000:15:00.5: BAR 0: set to [mem 0xf4802400-0xf48024ff] (PCI address [0xf4802400-0xf48024ff]) [ 2029.284054] r852 0000:15:00.5: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [ 2029.284062] r852 0000:15:00.5: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [ 2029.284862] PM: early resume of devices complete after 68.830 msecs [ 2029.284956] i915 0000:00:02.0: power state changed by ACPI to D0 [ 2029.284961] i915 0000:00:02.0: power state changed by ACPI to D0 [ 2029.284965] i915 0000:00:02.0: setting latency timer to 64 [ 2029.285159] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [ 2029.285168] e1000e 0000:00:19.0: PME# disabled [ 2029.285268] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 2029.287376] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 2029.287379] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 2029.287388] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2029.287395] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 2029.287431] usb usb3: root hub lost power or was reset [ 2029.287448] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2029.287455] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 2029.287478] usb usb4: root hub lost power or was reset [ 2029.287491] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 2029.287493] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 2029.287497] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 2029.287504] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 2029.287528] usb usb5: root hub lost power or was reset [ 2029.287542] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 2029.287547] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 2029.287553] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 2029.287559] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 2029.287608] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2029.287614] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 2029.287656] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X [ 2029.287698] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [ 2029.287709] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY [ 2029.287720] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY [ 2029.287731] pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY [ 2029.287737] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 2029.287740] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 2029.287745] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2029.287751] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2029.287776] usb usb6: root hub lost power or was reset [ 2029.287789] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2029.287796] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2029.287819] usb usb7: root hub lost power or was reset [ 2029.287833] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2029.287840] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2029.287866] usb usb8: root hub lost power or was reset [ 2029.287879] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 2029.287884] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 2029.287890] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 2029.287896] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2029.287943] pci 0000:00:1e.0: setting latency timer to 64 [ 2029.287960] ahci 0000:00:1f.2: setting latency timer to 64 [ 2029.288047] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2029.288050] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 2029.289656] sd 0:0:0:0: [sda] Starting disk [ 2029.304878] legacy_resume(): pnp_bus_resume+0x0/0x70 returns -19 [ 2029.304882] PM: Device 00:0a failed to resume: error -19 [ 2029.307886] Extended CMOS year: 2000 [ 2029.352126] firewire_core: skipped bus generations, destroying all nodes [ 2029.408065] PM: resume of drv:hub dev:6-0:1.0 complete after 118.698 msecs [ 2029.408073] PM: resume of drv: dev:ep_00 complete after 118.675 msecs [ 2029.408082] PM: resume of drv: dev:ep_81 complete after 118.700 msecs [ 2029.408088] PM: resume of drv:hub dev:5-0:1.0 complete after 118.788 msecs [ 2029.408096] PM: resume of drv: dev:ep_00 complete after 118.763 msecs [ 2029.408101] PM: resume of drv: dev:ep_81 complete after 118.786 msecs [ 2029.408106] PM: resume of drv: dev:ep_00 complete after 118.844 msecs [ 2029.408111] PM: resume of drv:hub dev:4-0:1.0 complete after 118.881 msecs [ 2029.408118] PM: resume of drv: dev:ep_81 complete after 118.872 msecs [ 2029.408133] PM: resume of drv:hub dev:8-0:1.0 complete after 118.630 msecs [ 2029.408141] PM: resume of drv: dev:ep_00 complete after 118.605 msecs [ 2029.408146] PM: resume of drv: dev:ep_81 complete after 118.627 msecs [ 2029.408151] PM: resume of drv:hub dev:7-0:1.0 complete after 118.716 msecs [ 2029.408154] PM: resume of drv: dev:ep_00 complete after 118.686 msecs [ 2029.408158] PM: resume of drv: dev:ep_81 complete after 118.707 msecs [ 2029.420276] PM: resume of drv:hub dev:2-0:1.0 complete after 131.135 msecs [ 2029.420284] PM: resume of drv: dev:ep_00 complete after 131.137 msecs [ 2029.420304] PM: resume of drv:usb dev:2-4:1.0 complete after 130.355 msecs [ 2029.420309] PM: resume of drv: dev:ep_81 complete after 131.164 msecs [ 2029.420311] PM: resume of drv:cdc_acm dev:2-4:1.1 complete after 130.345 msecs [ 2029.420314] PM: resume of drv:cdc_acm dev:2-4:1.2 complete after 130.317 msecs [ 2029.420319] PM: resume of drv:cdc_wdm dev:2-4:1.5 complete after 130.192 msecs [ 2029.420323] PM: resume of drv:cdc_acm dev:2-4:1.3 complete after 130.277 msecs [ 2029.420326] PM: resume of drv:cdc_wdm dev:2-4:1.6 complete after 130.168 msecs [ 2029.420330] PM: resume of drv:cdc_acm dev:2-4:1.4 complete after 130.252 msecs [ 2029.420333] PM: resume of drv:cdc_acm dev:2-4:1.9 complete after 130.060 msecs [ 2029.420338] PM: resume of drv:cdc_ether dev:2-4:1.7 complete after 130.147 msecs [ 2029.420341] PM: resume of drv:cdc_acm dev:2-4:1.10 complete after 130.035 msecs [ 2029.420345] PM: resume of drv:cdc_ether dev:2-4:1.8 complete after 130.121 msecs [ 2029.420349] PM: resume of drv: dev:ep_8a complete after 130.369 msecs [ 2029.420353] PM: resume of drv: dev:ep_00 complete after 129.998 msecs [ 2029.420355] PM: resume of drv: dev:ep_8b complete after 130.212 msecs [ 2029.420358] PM: resume of drv: dev:ep_01 complete after 130.345 msecs [ 2029.420360] PM: resume of drv: dev:ep_8c complete after 130.186 msecs [ 2029.420363] PM: resume of drv: dev:ep_81 complete after 130.334 msecs [ 2029.420366] PM: resume of drv: dev:ep_85 complete after 130.077 msecs [ 2029.420368] PM: resume of drv: dev:ep_89 complete after 130.307 msecs [ 2029.420371] PM: resume of drv: dev:ep_06 complete after 130.050 msecs [ 2029.420374] PM: resume of drv: dev:ep_02 complete after 130.279 msecs [ 2029.420376] PM: resume of drv: dev:ep_86 complete after 130.038 msecs [ 2029.420379] PM: resume of drv: dev:ep_82 complete after 130.268 msecs [ 2029.420388] PM: resume of drv: dev:ep_84 complete after 130.131 msecs [ 2029.420391] PM: resume of drv: dev:ep_87 complete after 130.181 msecs [ 2029.420394] PM: resume of drv: dev:ep_04 complete after 130.154 msecs [ 2029.512047] PM: resume of drv:hub dev:3-0:1.0 complete after 222.889 msecs [ 2029.512053] PM: resume of drv: dev:ep_00 complete after 222.858 msecs [ 2029.512055] PM: resume of drv: dev:ep_81 complete after 222.876 msecs [ 2029.516576] PM: resume of drv:i915 dev:0000:00:02.0 complete after 231.632 msecs [ 2029.532050] usb 2-1: reset high speed USB device number 2 using ehci_hcd [ 2029.540042] PM: resume of drv:hub dev:1-0:1.0 complete after 250.916 msecs [ 2029.540049] PM: resume of drv: dev:ep_00 complete after 250.916 msecs [ 2029.540055] PM: resume of drv: dev:ep_81 complete after 250.926 msecs [ 2029.540073] PM: resume of drv:snd-usb-audio dev:3-1:1.2 complete after 249.488 msecs [ 2029.540076] PM: resume of drv:snd-usb-audio dev:3-1:1.0 complete after 249.555 msecs [ 2029.540079] PM: resume of drv:snd-usb-audio dev:3-1:1.3 complete after 249.479 msecs [ 2029.540082] PM: resume of drv:snd-usb-audio dev:3-1:1.1 complete after 249.548 msecs [ 2029.540089] PM: resume of drv:snd-usb-audio dev:3-1:1.4 complete after 249.472 msecs [ 2029.540092] PM: resume of drv: dev:ep_01 complete after 249.542 msecs [ 2029.540095] PM: resume of drv: dev:ep_00 complete after 249.462 msecs [ 2029.540098] PM: resume of drv: dev:ep_81 complete after 249.531 msecs [ 2029.608054] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2029.613114] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 2029.613956] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 2029.623874] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 2029.624720] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 2029.628394] ata2.00: configured for UDMA/133 [ 2029.780032] usb 1-6: reset high speed USB device number 2 using ehci_hcd [ 2029.880058] PM: resume of drv:hub dev:2-1:1.0 complete after 590.331 msecs [ 2029.880066] PM: resume of drv: dev:ep_00 complete after 590.307 msecs [ 2029.880080] PM: resume of drv: dev:ep_81 complete after 590.337 msecs [ 2029.923048] PM: resume of drv:uvcvideo dev:1-6:1.0 complete after 633.456 msecs [ 2029.923055] PM: resume of drv:uvcvideo dev:1-6:1.1 complete after 633.431 msecs [ 2029.923061] PM: resume of drv: dev:ep_00 complete after 633.421 msecs [ 2029.923065] PM: resume of drv: dev:ep_83 complete after 633.458 msecs [ 2030.082627] firewire_core: rediscovered device fw0 [ 2030.172330] usb 2-1.2: reset low speed USB device number 4 using ehci_hcd [ 2030.460363] PM: resume of drv: dev:ep_00 complete after 1170.528 msecs [ 2030.460371] PM: resume of drv:usbhid dev:2-1.2:1.0 complete after 1170.568 msecs [ 2030.460400] PM: resume of drv: dev:ep_81 complete after 1170.580 msecs [ 2030.524338] usb 2-1.3: reset full speed USB device number 5 using ehci_hcd [ 2030.617480] PM: resume of drv: dev:ep_00 complete after 1327.563 msecs [ 2030.617487] PM: resume of drv:usb dev:2-1.3:1.0 complete after 1327.620 msecs [ 2030.617515] PM: resume of drv: dev:ep_01 complete after 1327.614 msecs [ 2030.617522] PM: resume of drv: dev:ep_81 complete after 1327.639 msecs [ 2030.688334] usb 2-1.4: reset high speed USB device number 44 using ehci_hcd [ 2030.992118] PM: resume of drv: dev:ep_00 complete after 1701.697 msecs [ 2030.992124] PM: resume of drv:hub dev:2-1.4:1.0 complete after 1701.736 msecs [ 2030.992134] PM: resume of drv: dev:ep_81 complete after 1701.730 msecs [ 2031.252333] usb 2-1.4.1: reset low speed USB device number 45 using ehci_hcd [ 2031.535843] PM: resume of drv: dev:ep_00 complete after 2245.358 msecs [ 2031.535850] PM: resume of drv:usbhid dev:2-1.4.1:1.0 complete after 2245.397 msecs [ 2031.535879] PM: resume of drv: dev:ep_81 complete after 2245.409 msecs [ 2031.740126] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2031.741409] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 2031.741414] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2031.741531] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [ 2031.741536] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 2031.751313] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 2031.751318] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2031.751485] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [ 2031.751489] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 2031.752367] ata1.00: configured for UDMA/133 [ 2031.772612] PM: resume of drv:sd dev:0:0:0:0 complete after 2482.952 msecs [ 2031.772635] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2414.659 msecs [ 2031.772798] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2483.104 msecs [ 2031.913567] PM: resume of devices complete after 2628.646 msecs [ 2031.913761] PM: resume devices took 2.628 seconds [ 2031.913812] PM: Finishing wakeup. [ 2031.913813] Restarting tasks ... [ 2031.913874] usb 2-4: USB disconnect, device number 8 [ 2031.925462] cdc_ether 2-4:1.7: wwan0: unregister 'cdc_ether' usb-0000:00:1d.7-4, Mobile Broadband Network Device [ 2031.940913] usb 3-1: USB disconnect, device number 2 [ 2031.949242] done. [ 2031.953325] video LNXVIDEO:00: Restoring backlight state [ 2033.318139] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 2033.432248] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 2033.488096] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 2033.488335] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2033.538213] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2034.440074] usb 2-4: new high speed USB device number 46 using ehci_hcd [ 2035.288848] cdc_acm 2-4:1.1: ttyACM0: USB ACM device [ 2035.312336] cdc_acm 2-4:1.3: ttyACM1: USB ACM device [ 2035.360906] cdc_wdm 2-4:1.5: cdc-wdm0: USB WDM device [ 2035.364994] cdc_wdm 2-4:1.6: cdc-wdm1: USB WDM device [ 2035.372791] cdc_ether 2-4:1.7: wwan0: register 'cdc_ether' at usb-0000:00:1d.7-4, Mobile Broadband Network Device, 02:80:37:ec:02:00 [ 2035.380586] cdc_acm 2-4:1.9: ttyACM2: USB ACM device [ 2039.989891] wlan0: authenticate with 3c:ea:4f:85:07:d1 (try 1) [ 2039.992050] wlan0: authenticated [ 2040.002102] wlan0: associate with 3c:ea:4f:85:07:d1 (try 1) [ 2040.004773] wlan0: RX AssocResp from 3c:ea:4f:85:07:d1 (capab=0x431 status=0 aid=1) [ 2040.004776] wlan0: associated [ 2040.007911] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2040.007967] cfg80211: Calling CRDA for country: US [ 2040.014928] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 2040.014933] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 2040.014935] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 2040.014938] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 2040.014940] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 2040.014943] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 2040.014945] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 2040.014947] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 2040.014950] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 2040.014952] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 2040.014954] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 2040.014957] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 2040.014959] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 2040.014962] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 2040.014964] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 2040.014967] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 2040.014969] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 2040.014972] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 2040.014974] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 2040.014976] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 2040.014979] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 2040.014981] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 2040.014983] cfg80211: Disabling freq 2467 MHz [ 2040.014985] cfg80211: Disabling freq 2472 MHz [ 2040.014987] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule: [ 2040.014990] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (300 mBi, 1700 mBm) [ 2040.014992] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule: [ 2040.014995] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (300 mBi, 1700 mBm) [ 2040.014997] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule: [ 2040.015000] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (300 mBi, 1700 mBm) [ 2040.015002] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule: [ 2040.015004] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (300 mBi, 1700 mBm) [ 2040.015007] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule: [ 2040.015009] cfg80211: 5250000 KHz - 5330000 KHz @ KHz), (300 mBi, 2000 mBm) [ 2040.015012] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule: [ 2040.015014] cfg80211: 5250000 KHz - 5330000 KHz @ KHz), (300 mBi, 2000 mBm) [ 2040.015016] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule: [ 2040.015019] cfg80211: 5250000 KHz - 5330000 KHz @ KHz), (300 mBi, 2000 mBm) [ 2040.015021] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule: [ 2040.015024] cfg80211: 5250000 KHz - 5330000 KHz @ KHz), (300 mBi, 2000 mBm) [ 2040.015026] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule: [ 2040.015029] cfg80211: 5490000 KHz - 5600000 KHz @ KHz), (300 mBi, 2000 mBm) [ 2040.015031] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule: [ 2040.015034] cfg80211: 5490000 KHz - 5600000 KHz @ KHz), (300 mBi, 2000 mBm) [ 2040.015036] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule: [ 2040.015039] cfg80211: 5490000 KHz - 5600000 KHz @ KHz), (300 mBi, 2000 mBm) [ 2040.015041] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule: [ 2040.015043] cfg80211: 5490000 KHz - 5600000 KHz @ KHz), (300 mBi, 2000 mBm) [ 2040.015046] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule: [ 2040.015048] cfg80211: 5490000 KHz - 5600000 KHz @ KHz), (300 mBi, 2000 mBm) [ 2040.015050] cfg80211: Disabling freq 5600 MHz [ 2040.015052] cfg80211: Disabling freq 5620 MHz [ 2040.015053] cfg80211: Disabling freq 5640 MHz [ 2040.015055] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule: [ 2040.015058] cfg80211: 5650000 KHz - 5710000 KHz @ KHz), (300 mBi, 2000 mBm) [ 2040.015060] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule: [ 2040.015063] cfg80211: 5650000 KHz - 5710000 KHz @ KHz), (300 mBi, 2000 mBm) [ 2040.015065] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule: [ 2040.015068] cfg80211: 5650000 KHz - 5710000 KHz @ KHz), (300 mBi, 2000 mBm) [ 2040.015070] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule: [ 2040.015073] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (300 mBi, 3000 mBm) [ 2040.015075] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule: [ 2040.015077] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (300 mBi, 3000 mBm) [ 2040.015080] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule: [ 2040.015082] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (300 mBi, 3000 mBm) [ 2040.015084] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule: [ 2040.015087] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (300 mBi, 3000 mBm) [ 2040.015089] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule: [ 2040.015092] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (300 mBi, 3000 mBm) [ 2040.015096] cfg80211: Regulatory domain changed to country: US [ 2040.015098] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2040.015101] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 2040.015104] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 2040.015106] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2040.015109] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2040.015111] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2040.015114] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 2050.408030] wlan0: no IPv6 routers present [ 4734.626365] compiz[7774]: segfault at 0 ip (null) sp bfa33f3c error 4 in libpthread-2.13.so[110000+17000]