[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.0-8-generic (buildd@crested) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-6ubuntu3) ) #11-Ubuntu SMP Fri Aug 12 20:23:58 UTC 2011 (Ubuntu 3.0.0-8.11-generic 3.0.1)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-8-generic root=UUID=276bf335-7edc-4a06-ada7-f1f361a4a321 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007bfb0000 (usable)
[    0.000000]  BIOS-e820: 000000007bfb0000 - 000000007bfc0000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007bfc0000 - 000000007bff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007bff0000 - 000000007c000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.3 present.
[    0.000000] DMI:          K8NF4G-SATA2/K8NF4G-SATA2, BIOS P1.50 11/03/2005
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x7bfb0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF80000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-000000007bfb0000
[    0.000000]  0000000000 - 007be00000 page 2M
[    0.000000]  007be00000 - 007bfb0000 page 4k
[    0.000000] kernel direct mapping tables up to 7bfb0000 @ 7bfac000-7bfb0000
[    0.000000] RAMDISK: 36638000 - 37314000
[    0.000000] ACPI: RSDP 00000000000fa850 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 000000007bfb0000 00034 (v01 A M I  OEMRSDT  11000503 MSFT 00000097)
[    0.000000] ACPI: FACP 000000007bfb0200 00084 (v02 A M I  OEMFACP  11000503 MSFT 00000097)
[    0.000000] ACPI: DSDT 000000007bfb0440 04D0C (v01  K8N62 K8N62150 00000150 INTL 02002026)
[    0.000000] ACPI: FACS 000000007bfc0000 00040
[    0.000000] ACPI: APIC 000000007bfb0390 00070 (v01 A M I  OEMAPIC  11000503 MSFT 00000097)
[    0.000000] ACPI: MCFG 000000007bfb0400 0003C (v01 A M I  OEMMCFG  11000503 MSFT 00000097)
[    0.000000] ACPI: OEMB 000000007bfc0040 0005E (v01 A M I  AMI_OEM  11000503 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000007bfb0000
[    0.000000] Initmem setup node 0 0000000000000000-000000007bfb0000
[    0.000000]   NODE_DATA [000000007bfa7000 - 000000007bfabfff]
[    0.000000]  [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880079600000-ffff88007b1fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007bfb0
[    0.000000] On node 0 totalpages: 507711
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3922 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 6887 pages used for memmap
[    0.000000]   DMA32 zone: 496841 pages, LIFO batch:31
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
[    0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 7c000000 (gap: 7c000000:82c00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007bc00000 s79616 r8192 d22784 u1048576
[    0.000000] pcpu-alloc: s79616 r8192 d22784 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 500763
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-8-generic root=UUID=276bf335-7edc-4a06-ada7-f1f361a4a321 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ 3000000000 size 32 MB
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] Memory: 1975280k/2031296k available (6051k kernel code, 452k absent, 55564k reserved, 4932k data, 980k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16640 nr_irqs:512 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1607.224 MHz processor.
[    0.000000] Marking TSC unstable due to TSCs unsynchronized
[    0.020011] Calibrating delay loop (skipped), value calculated using timer frequency.. 3214.44 BogoMIPS (lpj=16072240)
[    0.020017] pid_max: default: 32768 minimum: 301
[    0.020066] Security Framework initialized
[    0.020101] AppArmor: AppArmor initialized
[    0.020103] Yama: becoming mindful.
[    0.020502] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.023678] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.025233] Mount-cache hash table entries: 256
[    0.025509] Initializing cgroup subsys cpuacct
[    0.025517] Initializing cgroup subsys memory
[    0.025536] Initializing cgroup subsys devices
[    0.025540] Initializing cgroup subsys freezer
[    0.025543] Initializing cgroup subsys net_cls
[    0.025546] Initializing cgroup subsys blkio
[    0.025559] Initializing cgroup subsys perf_event
[    0.025611] tseg: 0000000000
[    0.025637] mce: CPU supports 5 MCE banks
[    0.025701] SMP alternatives: switching to UP code
[    0.037419] ACPI: Core revision 20110413
[    0.041114] ftrace: allocating 25588 entries in 101 pages
[    0.050712] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.151707] CPU0: AMD Sempron(tm) Processor 2800+ stepping 02
[    0.160000] Performance Events: AMD PMU driver.
[    0.160000] ... version:                0
[    0.160000] ... bit width:              48
[    0.160000] ... generic registers:      4
[    0.160000] ... value mask:             0000ffffffffffff
[    0.160000] ... max period:             00007fffffffffff
[    0.160000] ... fixed-purpose events:   0
[    0.160000] ... event mask:             000000000000000f
[    0.160000] Brought up 1 CPUs
[    0.160000] Total of 1 processors activated (3214.44 BogoMIPS).
[    0.160000] devtmpfs: initialized
[    0.160000] PM: Registering ACPI NVS region at 7bfc0000 (196608 bytes)
[    0.160000] print_constraints: dummy: 
[    0.160000] Time: 13:19:58  Date: 08/18/11
[    0.160000] NET: Registered protocol family 16
[    0.160000] node 0 link 0: io port [1000, ffffff]
[    0.160000] TOM: 0000000080000000 aka 2048M
[    0.160000] node 0 link 0: mmio [e0000000, efffffff]
[    0.160000] node 0 link 0: mmio [a0000, bffff]
[    0.160000] node 0 link 0: mmio [80000000, fe0bffff]
[    0.160000] bus: [00, ff] on node 0 link 0
[    0.160000] bus: 00 index 0 [io  0x0000-0xffff]
[    0.160000] bus: 00 index 1 [mem 0x80000000-0xfcffffffff]
[    0.160000] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[    0.160000] ACPI: bus type pci registered
[    0.160000] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.160000] PCI: not using MMCONFIG
[    0.160000] PCI: Using configuration type 1 for base access
[    0.160000] bio: create slab <bio-0> at 0
[    0.160000] ACPI: EC: Look up EC in DSDT
[    0.160000] ACPI: Executed 1 blocks of module-level executable AML code
[    0.160000] ACPI: Interpreter enabled
[    0.160000] ACPI: (supports S0 S1 S3 S4 S5)
[    0.160000] ACPI: Using IOAPIC for interrupt routing
[    0.160000] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.161085] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.194371] ACPI: No dock devices found.
[    0.194378] HEST: Table not found.
[    0.194384] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.194500] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.194694] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.194698] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.194702] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.194706] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[    0.194710] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfeffffff] (ignored)
[    0.194727] pci 0000:00:00.0: [10de:02f1] type 0 class 0x000500
[    0.194785] pci 0000:00:00.1: [10de:02fa] type 0 class 0x000500
[    0.194822] pci 0000:00:00.2: [10de:02fe] type 0 class 0x000500
[    0.194868] pci 0000:00:00.3: [10de:02f8] type 0 class 0x000500
[    0.194913] pci 0000:00:00.4: [10de:02f9] type 0 class 0x000500
[    0.194960] pci 0000:00:00.5: [10de:02ff] type 0 class 0x000500
[    0.195007] pci 0000:00:00.6: [10de:027f] type 0 class 0x000500
[    0.195044] pci 0000:00:00.7: [10de:027e] type 0 class 0x000500
[    0.195098] pci 0000:00:02.0: [10de:02fc] type 1 class 0x000604
[    0.195127] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.195132] pci 0000:00:02.0: PME# disabled
[    0.195153] pci 0000:00:03.0: [10de:02fd] type 1 class 0x000604
[    0.195180] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.195184] pci 0000:00:03.0: PME# disabled
[    0.195204] pci 0000:00:04.0: [10de:02fb] type 1 class 0x000604
[    0.195233] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.195237] pci 0000:00:04.0: PME# disabled
[    0.195254] pci 0000:00:05.0: [10de:0242] type 0 class 0x000300
[    0.195264] pci 0000:00:05.0: reg 10: [mem 0xfd000000-0xfdffffff]
[    0.195273] pci 0000:00:05.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.195281] pci 0000:00:05.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
[    0.195290] pci 0000:00:05.0: reg 30: [mem 0xfebe0000-0xfebfffff pref]
[    0.195333] pci 0000:00:09.0: [10de:0270] type 0 class 0x000500
[    0.195515] pci 0000:00:0a.0: [10de:0260] type 0 class 0x000601
[    0.195555] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.195576] pci 0000:00:0a.1: [10de:0264] type 0 class 0x000c05
[    0.195616] pci 0000:00:0a.1: reg 20: [io  0x5000-0x503f]
[    0.195625] pci 0000:00:0a.1: reg 24: [io  0x6000-0x603f]
[    0.195654] pci 0000:00:0a.1: PME# supported from D3hot D3cold
[    0.195660] pci 0000:00:0a.1: PME# disabled
[    0.195687] pci 0000:00:0b.0: [10de:026d] type 0 class 0x000c03
[    0.195700] pci 0000:00:0b.0: reg 10: [mem 0xfebde000-0xfebdefff]
[    0.195746] pci 0000:00:0b.0: supports D1 D2
[    0.195749] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.195754] pci 0000:00:0b.0: PME# disabled
[    0.195775] pci 0000:00:0b.1: [10de:026e] type 0 class 0x000c03
[    0.195790] pci 0000:00:0b.1: reg 10: [mem 0xfebdfc00-0xfebdfcff]
[    0.195836] pci 0000:00:0b.1: supports D1 D2
[    0.195839] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.195843] pci 0000:00:0b.1: PME# disabled
[    0.195870] pci 0000:00:0d.0: [10de:0265] type 0 class 0x000101
[    0.195900] pci 0000:00:0d.0: reg 20: [io  0xffa0-0xffaf]
[    0.195939] pci 0000:00:0e.0: [10de:0266] type 0 class 0x000101
[    0.195954] pci 0000:00:0e.0: reg 10: [io  0x0f80-0x0f87]
[    0.195962] pci 0000:00:0e.0: reg 14: [io  0x0f00-0x0f03]
[    0.195970] pci 0000:00:0e.0: reg 18: [io  0x0e80-0x0e87]
[    0.195977] pci 0000:00:0e.0: reg 1c: [io  0x0e00-0x0e03]
[    0.195985] pci 0000:00:0e.0: reg 20: [io  0xe000-0xe00f]
[    0.195993] pci 0000:00:0e.0: reg 24: [mem 0xfebdd000-0xfebddfff]
[    0.196036] pci 0000:00:10.0: [10de:026f] type 1 class 0x000604
[    0.196088] pci 0000:00:10.2: [10de:026b] type 0 class 0x000401
[    0.196101] pci 0000:00:10.2: reg 10: [io  0xd800-0xd8ff]
[    0.196109] pci 0000:00:10.2: reg 14: [io  0xd400-0xd4ff]
[    0.196117] pci 0000:00:10.2: reg 18: [mem 0xfebdc000-0xfebdcfff]
[    0.196152] pci 0000:00:10.2: supports D1 D2
[    0.196180] pci 0000:00:14.0: [10de:0269] type 0 class 0x000680
[    0.196192] pci 0000:00:14.0: reg 10: [mem 0xfebdb000-0xfebdbfff]
[    0.196200] pci 0000:00:14.0: reg 14: [io  0xdc00-0xdc07]
[    0.196237] pci 0000:00:14.0: supports D1 D2
[    0.196240] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.196245] pci 0000:00:14.0: PME# disabled
[    0.196263] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[    0.196290] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[    0.196314] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[    0.196337] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[    0.196366] PCI: peer root bus 00 res updated from pci conf
[    0.196400] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[    0.196405] pci 0000:00:02.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.196410] pci 0000:00:02.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.196415] pci 0000:00:02.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.196443] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[    0.196448] pci 0000:00:03.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.196452] pci 0000:00:03.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.196458] pci 0000:00:03.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.196485] pci 0000:00:04.0: PCI bridge to [bus 03-03]
[    0.196490] pci 0000:00:04.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.196494] pci 0000:00:04.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.196499] pci 0000:00:04.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.196548] pci 0000:04:0a.0: [10ec:8185] type 0 class 0x000200
[    0.196565] pci 0000:04:0a.0: reg 10: [io  0xc800-0xc8ff]
[    0.196575] pci 0000:04:0a.0: reg 14: [mem 0xfaaffc00-0xfaafffff]
[    0.196626] pci 0000:04:0a.0: supports D1 D2
[    0.196629] pci 0000:04:0a.0: PME# supported from D1 D2 D3hot D3cold
[    0.196635] pci 0000:04:0a.0: PME# disabled
[    0.196665] pci 0000:00:10.0: PCI bridge to [bus 04-04] (subtractive decode)
[    0.196670] pci 0000:00:10.0:   bridge window [io  0xc000-0xcfff]
[    0.196674] pci 0000:00:10.0:   bridge window [mem 0xfaa00000-0xfaafffff]
[    0.196679] pci 0000:00:10.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.196683] pci 0000:00:10.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.196687] pci 0000:00:10.0:   bridge window [mem 0x80000000-0xfcffffffff] (subtractive decode)
[    0.196692] pci 0000:00:10.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.196706] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.196891] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[    0.196941] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[    0.196999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[    0.197094] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.197165]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.197170]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.197173] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.207642] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[    0.207757] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[    0.207867] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *11
[    0.207976] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.208085] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[    0.208193] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[    0.208302] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *11
[    0.208410] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[    0.208520] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *11
[    0.208629] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[    0.208738] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
[    0.208846] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
[    0.208962] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *11
[    0.209072] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[    0.209181] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[    0.209302] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
[    0.209418] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
[    0.209534] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
[    0.209659] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    0.209839] vgaarb: device added: PCI:0000:00:05.0,decodes=io+mem,owns=io+mem,locks=none
[    0.209852] vgaarb: loaded
[    0.209854] vgaarb: bridge control possible 0000:00:05.0
[    0.210210] SCSI subsystem initialized
[    0.210321] libata version 3.00 loaded.
[    0.210392] usbcore: registered new interface driver usbfs
[    0.210412] usbcore: registered new interface driver hub
[    0.210448] usbcore: registered new device driver usb
[    0.210591] PCI: Using ACPI for IRQ routing
[    0.218270] PCI: pci_cache_line_size set to 64 bytes
[    0.218368] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.218372] reserve RAM buffer: 000000007bfb0000 - 000000007bffffff 
[    0.218537] NetLabel: Initializing
[    0.218540] NetLabel:  domain hash size = 128
[    0.218542] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.218560] NetLabel:  unlabeled traffic allowed by default
[    0.229698] AppArmor: AppArmor Filesystem Enabled
[    0.229763] pnp: PnP ACPI init
[    0.229793] ACPI: bus type pnp registered
[    0.230016] pnp 00:00: [bus 00-ff]
[    0.230021] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.230024] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.230028] pnp 00:00: [io  0x0d00-0xffff window]
[    0.230031] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.230035] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.230038] pnp 00:00: [mem 0x80000000-0xfeffffff window]
[    0.230128] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.230173] pnp 00:01: [dma 4]
[    0.230176] pnp 00:01: [io  0x0000-0x000f]
[    0.230179] pnp 00:01: [io  0x0081-0x0083]
[    0.230182] pnp 00:01: [io  0x0087]
[    0.230185] pnp 00:01: [io  0x0089-0x008b]
[    0.230195] pnp 00:01: [io  0x008f]
[    0.230198] pnp 00:01: [io  0x00c0-0x00df]
[    0.230234] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.230249] pnp 00:02: [io  0x0070-0x0071]
[    0.230272] pnp 00:02: [irq 8]
[    0.230310] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.230322] pnp 00:03: [io  0x0061]
[    0.230357] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.230370] pnp 00:04: [io  0x00f0-0x00ff]
[    0.230380] pnp 00:04: [irq 13]
[    0.230411] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.230920] pnp 00:05: [io  0x03f0-0x03f5]
[    0.230924] pnp 00:05: [io  0x03f7]
[    0.230934] pnp 00:05: [irq 6]
[    0.230937] pnp 00:05: [dma 2]
[    0.231011] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.231446] pnp 00:06: [io  0x0378-0x037f]
[    0.231449] pnp 00:06: [io  0x0778-0x077f]
[    0.231459] pnp 00:06: [irq 7]
[    0.231462] pnp 00:06: [dma 3]
[    0.231638] pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.232301] pnp 00:07: [io  0x0010-0x001f]
[    0.232304] pnp 00:07: [io  0x0022-0x003f]
[    0.232307] pnp 00:07: [io  0x0044-0x005f]
[    0.232310] pnp 00:07: [io  0x0062-0x0063]
[    0.232313] pnp 00:07: [io  0x0065-0x006f]
[    0.232316] pnp 00:07: [io  0x0072-0x007f]
[    0.232319] pnp 00:07: [io  0x0080]
[    0.232322] pnp 00:07: [io  0x0084-0x0086]
[    0.232325] pnp 00:07: [io  0x0088]
[    0.232328] pnp 00:07: [io  0x008c-0x008e]
[    0.232331] pnp 00:07: [io  0x0090-0x009f]
[    0.232333] pnp 00:07: [io  0x00a2-0x00bf]
[    0.232336] pnp 00:07: [io  0x00e0-0x00ef]
[    0.232339] pnp 00:07: [io  0x04d0-0x04d1]
[    0.232342] pnp 00:07: [io  0x0800-0x080f]
[    0.232345] pnp 00:07: [io  0x4000-0x407f]
[    0.232348] pnp 00:07: [io  0x4080-0x40ff]
[    0.232351] pnp 00:07: [io  0x4400-0x447f]
[    0.232354] pnp 00:07: [io  0x4480-0x44ff]
[    0.232357] pnp 00:07: [io  0x4800-0x487f]
[    0.232360] pnp 00:07: [io  0x4880-0x48ff]
[    0.232363] pnp 00:07: [io  0x2000-0x207f]
[    0.232366] pnp 00:07: [io  0x2080-0x20ff]
[    0.232369] pnp 00:07: [mem 0xfefe0000-0xfefe01ff]
[    0.232372] pnp 00:07: [mem 0xfee01000-0xfeefffff]
[    0.232492] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.232496] system 00:07: [io  0x0800-0x080f] has been reserved
[    0.232500] system 00:07: [io  0x4000-0x407f] has been reserved
[    0.232504] system 00:07: [io  0x4080-0x40ff] has been reserved
[    0.232508] system 00:07: [io  0x4400-0x447f] has been reserved
[    0.232512] system 00:07: [io  0x4480-0x44ff] has been reserved
[    0.232521] system 00:07: [io  0x4800-0x487f] has been reserved
[    0.232526] system 00:07: [io  0x4880-0x48ff] has been reserved
[    0.232530] system 00:07: [io  0x2000-0x207f] has been reserved
[    0.232534] system 00:07: [io  0x2080-0x20ff] has been reserved
[    0.232539] system 00:07: [mem 0xfefe0000-0xfefe01ff] has been reserved
[    0.232543] system 00:07: [mem 0xfee01000-0xfeefffff] has been reserved
[    0.232548] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.232639] pnp 00:08: [mem 0xfec00000-0xfec00fff]
[    0.232642] pnp 00:08: [mem 0xfee00000-0xfee00fff]
[    0.232645] pnp 00:08: [mem 0xfeb80000-0xfebbffff]
[    0.232714] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.232719] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.232723] system 00:08: [mem 0xfeb80000-0xfebbffff] has been reserved
[    0.232727] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.233070] pnp 00:09: [io  0x03f8-0x03ff]
[    0.233085] pnp 00:09: [irq 4]
[    0.233088] pnp 00:09: [dma 0 disabled]
[    0.233174] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.233265] pnp 00:0a: [io  0x0000-0xffffffffffffffff disabled]
[    0.233269] pnp 00:0a: [io  0x0000-0xffffffffffffffff disabled]
[    0.233273] pnp 00:0a: [io  0x0290-0x029f]
[    0.233338] system 00:0a: [io  0x0290-0x029f] has been reserved
[    0.233342] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.233448] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[    0.233512] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[    0.233517] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.233715] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[    0.233719] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[    0.233722] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[    0.233725] pnp 00:0c: [mem 0x00100000-0x7fffffff]
[    0.233728] pnp 00:0c: [mem 0xff000000-0xffffffff]
[    0.233801] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.233805] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.233809] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.233814] system 00:0c: [mem 0x00100000-0x7fffffff] could not be reserved
[    0.233818] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
[    0.233823] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.234214] pnp: PnP ACPI: found 13 devices
[    0.234217] ACPI: ACPI bus type pnp unregistered
[    0.240994] Switching to clocksource acpi_pm
[    0.241052] PCI: max bus depth: 1 pci_try_num: 2
[    0.241104] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[    0.241107] pci 0000:00:02.0:   bridge window [io  disabled]
[    0.241111] pci 0000:00:02.0:   bridge window [mem disabled]
[    0.241115] pci 0000:00:02.0:   bridge window [mem pref disabled]
[    0.241120] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[    0.241122] pci 0000:00:03.0:   bridge window [io  disabled]
[    0.241126] pci 0000:00:03.0:   bridge window [mem disabled]
[    0.241130] pci 0000:00:03.0:   bridge window [mem pref disabled]
[    0.241134] pci 0000:00:04.0: PCI bridge to [bus 03-03]
[    0.241137] pci 0000:00:04.0:   bridge window [io  disabled]
[    0.241140] pci 0000:00:04.0:   bridge window [mem disabled]
[    0.241144] pci 0000:00:04.0:   bridge window [mem pref disabled]
[    0.241149] pci 0000:00:10.0: PCI bridge to [bus 04-04]
[    0.241153] pci 0000:00:10.0:   bridge window [io  0xc000-0xcfff]
[    0.241159] pci 0000:00:10.0:   bridge window [mem 0xfaa00000-0xfaafffff]
[    0.241163] pci 0000:00:10.0:   bridge window [mem pref disabled]
[    0.241180] pci 0000:00:02.0: setting latency timer to 64
[    0.241187] pci 0000:00:03.0: setting latency timer to 64
[    0.241194] pci 0000:00:04.0: setting latency timer to 64
[    0.241201] pci 0000:00:10.0: setting latency timer to 64
[    0.241206] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.241209] pci_bus 0000:00: resource 5 [mem 0x80000000-0xfcffffffff]
[    0.241213] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.241218] pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
[    0.241221] pci_bus 0000:04: resource 1 [mem 0xfaa00000-0xfaafffff]
[    0.241225] pci_bus 0000:04: resource 4 [io  0x0000-0xffff]
[    0.241228] pci_bus 0000:04: resource 5 [mem 0x80000000-0xfcffffffff]
[    0.241232] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.241326] NET: Registered protocol family 2
[    0.241494] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.242904] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.248688] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.249029] Switched to NOHz mode on CPU #0
[    0.249153] TCP: Hash tables configured (established 262144 bind 65536)
[    0.249157] TCP reno registered
[    0.249173] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.249225] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.249466] NET: Registered protocol family 1
[    0.249542] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.249571] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.249604] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.249613] pci 0000:00:05.0: Boot video device
[    0.310123] pci 0000:00:09.0: Found enabled HT MSI Mapping
[    0.310180] pci 0000:00:09.0: Found enabled HT MSI Mapping
[    0.310208] PCI: CLS 64 bytes, default 64
[    0.310556] Trying to unpack rootfs image as initramfs...
[    0.360939] audit: initializing netlink socket (disabled)
[    0.360959] type=2000 audit(1313673598.359:1): initialized
[    0.450537] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.510575] VFS: Disk quotas dquot_6.5.2
[    0.510672] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.511350] fuse init (API version 7.16)
[    0.511539] msgmni has been set to 3857
[    0.520346] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.520453] io scheduler noop registered
[    0.520456] io scheduler deadline registered
[    0.520515] io scheduler cfq registered (default)
[    0.520740] pcieport 0000:00:02.0: setting latency timer to 64
[    0.520782] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[    0.520891] pcieport 0000:00:03.0: setting latency timer to 64
[    0.520920] pcieport 0000:00:03.0: irq 41 for MSI/MSI-X
[    0.521004] pcieport 0000:00:04.0: setting latency timer to 64
[    0.521033] pcieport 0000:00:04.0: irq 42 for MSI/MSI-X
[    0.521127] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.521171] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.521359] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.521368] ACPI: Power Button [PWRB]
[    0.521435] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.521449] ACPI: Power Button [PWRF]
[    0.521488] ACPI: acpi_idle registered with cpuidle
[    0.524331] ERST: Table is not found!
[    0.524480] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.545161] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.592462] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.610634] Linux agpgart interface v0.103
[    0.612353] brd: module loaded
[    0.613161] loop: module loaded
[    0.620215] pata_acpi 0000:00:0d.0: setting latency timer to 64
[    0.620662] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[    0.620694] pata_acpi 0000:00:0e.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[    0.620736] pata_acpi 0000:00:0e.0: setting latency timer to 64
[    0.620749] pata_acpi 0000:00:0e.0: PCI INT A disabled
[    0.630691] Fixed MDIO Bus: probed
[    0.630729] PPP generic driver version 2.4.2
[    0.630843] tun: Universal TUN/TAP device driver, 1.6
[    0.630845] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.630984] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.631399] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    0.631431] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
[    0.631460] ehci_hcd 0000:00:0b.1: setting latency timer to 64
[    0.631465] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[    0.631566] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
[    0.631605] ehci_hcd 0000:00:0b.1: debug port 1
[    0.631614] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
[    0.631650] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xfebdfc00
[    0.650174] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
[    0.650523] hub 1-0:1.0: USB hub found
[    0.650530] hub 1-0:1.0: 8 ports detected
[    0.650719] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.660446] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21
[    0.660482] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUB0] -> GSI 21 (level, low) -> IRQ 21
[    0.660516] ohci_hcd 0000:00:0b.0: setting latency timer to 64
[    0.660521] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[    0.660683] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[    0.660741] ohci_hcd 0000:00:0b.0: irq 21, io mem 0xfebde000
[    0.722539] hub 2-0:1.0: USB hub found
[    0.722551] hub 2-0:1.0: 8 ports detected
[    0.722708] uhci_hcd: USB Universal Host Controller Interface driver
[    0.722865] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.725965] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.725976] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.730530] mousedev: PS/2 mouse device common for all mice
[    0.730742] rtc_cmos 00:02: RTC can wake from S4
[    0.730892] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.730937] rtc0: alarms up to one year, y3k, 114 bytes nvram
[    0.731129] device-mapper: uevent: version 1.0.3
[    0.731239] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[    0.731362] device-mapper: multipath: version 1.3.0 loaded
[    0.731366] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.731469] cpuidle: using governor ladder
[    0.731472] cpuidle: using governor menu
[    0.731474] EFI Variables Facility v0.08 2004-May-17
[    0.731934] TCP cubic registered
[    0.732105] NET: Registered protocol family 10
[    0.732862] NET: Registered protocol family 17
[    0.732901] Registering the dns_resolver key type
[    0.733128] PM: Hibernation image not present or could not be loaded.
[    0.733148] registered taskstats version 1
[    0.769012]   Magic number: 7:15:332
[    0.769074] tty tty53: hash matches
[    0.769185] rtc_cmos 00:02: setting system clock to 2011-08-18 13:19:59 UTC (1313673599)
[    0.769191] powernow-k8: Power state transitions not supported
[    0.769221] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.769223] EDD information not available.
[    0.885499] Freeing initrd memory: 13168k freed
[    0.906082] Freeing unused kernel memory: 980k freed
[    0.907368] Write protecting the kernel read-only data: 10240k
[    0.907935] Freeing unused kernel memory: 72k freed
[    0.915615] Freeing unused kernel memory: 1444k freed
[    0.959641] udevd[92]: starting version 173
[    0.970083] usb 1-2: new high speed USB device number 2 using ehci_hcd
[    1.165914] Floppy drive(s): fd0 is 1.44M
[    1.208849] FDC 0 is a post-1991 82077
[    1.259047] pata_amd 0000:00:0d.0: version 0.4.1
[    1.259132] pata_amd 0000:00:0d.0: setting latency timer to 64
[    1.263156] scsi0 : pata_amd
[    1.265511] scsi1 : pata_amd
[    1.266813] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    1.266818] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    1.272080] sata_nv 0000:00:0e.0: version 3.5
[    1.272108] sata_nv 0000:00:0e.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[    1.272112] sata_nv 0000:00:0e.0: Using SWNCQ mode
[    1.272193] sata_nv 0000:00:0e.0: setting latency timer to 64
[    1.272717] scsi2 : sata_nv
[    1.275022] scsi3 : sata_nv
[    1.275277] ata3: SATA max UDMA/133 cmd 0xf80 ctl 0xf00 bmdma 0xe000 irq 23
[    1.275282] ata4: SATA max UDMA/133 cmd 0xe80 ctl 0xe00 bmdma 0xe008 irq 23
[    1.278777] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.279060] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[    1.279088] forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20
[    1.279096] forcedeth 0000:00:14.0: setting latency timer to 64
[    1.358880] usbcore: registered new interface driver uas
[    1.580029] usb 2-3: new low speed USB device number 2 using ohci_hcd
[    1.760037] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.780419] ata3.00: ATA-8: ST3500418AS, CC46, max UDMA/133
[    1.780423] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.801094] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:13:8f:70:7d:b1
[    1.801100] forcedeth 0000:00:14.0: highdma pwrctl lnktim desc-v3
[    1.820483] ata3.00: configured for UDMA/133
[    1.820662] scsi 2:0:0:0: Direct-Access     ATA      ST3500418AS      CC46 PQ: 0 ANSI: 5
[    1.820892] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    1.821074] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.823623] sd 2:0:0:0: [sda] Write Protect is off
[    1.823630] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.823661] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.841938] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-3/2-3:1.0/input/input2
[    1.842210] generic-usb 0003:046D:C313.0001: input,hidraw0: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:0b.0-3/input0
[    1.856538] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-3/2-3:1.1/input/input3
[    1.857239] generic-usb 0003:046D:C313.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:0b.0-3/input1
[    1.857544] usbcore: registered new interface driver usbhid
[    1.857549] usbhid: USB HID core driver
[    1.879811]  sda: sda1 sda2 < sda5 sda6 sda7 >
[    1.880426] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.150031] ata4: SATA link down (SStatus 0 SControl 300)
[    2.152663] Initializing USB Mass Storage driver...
[    2.160140] usb 2-4: new low speed USB device number 3 using ohci_hcd
[    2.161394] scsi4 : usb-storage 1-2:1.0
[    2.164801] usbcore: registered new interface driver usb-storage
[    2.164807] USB Mass Storage support registered.
[    2.400808] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-4/2-4:1.0/input/input4
[    2.400995] generic-usb 0003:046D:C050.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-4/input0
[    2.589518] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    3.161967] scsi 4:0:0:0: Direct-Access     TDKMedia Trans-It Drive   PMAP PQ: 0 ANSI: 0 CCS
[    3.163617] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    3.163848] sd 4:0:0:0: [sdb] 7806976 512-byte logical blocks: (3.99 GB/3.72 GiB)
[    3.164808] sd 4:0:0:0: [sdb] Write Protect is off
[    3.164813] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[    3.165807] sd 4:0:0:0: [sdb] No Caching mode page present
[    3.165810] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    3.169808] sd 4:0:0:0: [sdb] No Caching mode page present
[    3.169812] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    3.170961]  sdb: sdb1
[    3.174808] sd 4:0:0:0: [sdb] No Caching mode page present
[    3.174812] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    3.174816] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    4.114250] Adding 6835196k swap on /dev/sda5.  Priority:-1 extents:1 across:6835196k 
[    4.169079] udevd[299]: starting version 173
[    4.771752] lp: driver loaded but no devices found
[    5.327072] wmi: Mapper loaded
[    5.380508] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[    5.447175] parport_pc 00:06: reported by Plug and Play ACPI
[    5.447247] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[    5.490335] [drm] Initialized drm 1.1.0 20060810
[    5.521676] lp0: using parport0 (interrupt-driven).
[    5.529296] i2c i2c-0: nForce2 SMBus adapter at 0x5000
[    5.529363] i2c i2c-1: nForce2 SMBus adapter at 0x6000
[    5.576447] NV_TCO: NV TCO WatchDog Timer Driver v0.01
[    5.576655] NV_TCO: Watchdog reboot not detected.
[    5.577100] NV_TCO: initialized (0x4440). heartbeat=30 sec (nowayout=0)
[    5.703787] MCE: In-kernel MCE decoding enabled.
[    5.935902] EDAC MC: Ver: 2.1.0
[    5.968844] cfg80211: Calling CRDA to update world regulatory domain
[    6.147824] ACPI: PCI Interrupt Link [LNEC] enabled at IRQ 19
[    6.147862] nouveau 0000:00:05.0: PCI INT A -> Link[LNEC] -> GSI 19 (level, low) -> IRQ 19
[    6.147868] nouveau 0000:00:05.0: setting latency timer to 64
[    6.151153] [drm] nouveau 0000:00:05.0: Detected an NV40 generation card (0x04e000a2)
[    6.152908] [drm] nouveau 0000:00:05.0: Attempting to load BIOS image from PRAMIN
[    6.194288] [drm] nouveau 0000:00:05.0: ... appears to be valid
[    6.194295] [drm] nouveau 0000:00:05.0: BIT BIOS found
[    6.194300] [drm] nouveau 0000:00:05.0: Bios version 05.51.22.28
[    6.194305] [drm] nouveau 0000:00:05.0: TMDS table version 1.1
[    6.194308] [drm] nouveau 0000:00:05.0: BIT table 'd' not found
[    6.194312] [drm] nouveau 0000:00:05.0: Found Display Configuration Block version 3.0
[    6.194317] [drm] nouveau 0000:00:05.0: Raw DCB entry 0: 02000300 00000023
[    6.194324] [drm] nouveau 0000:00:05.0: DCB connector table: VHER 0x30 5 10 2
[    6.194328] [drm] nouveau 0000:00:05.0:   0: 0x00000000: type 0x00 idx 0 tag 0xff
[    6.194336] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 0 at offset 0xCE63
[    6.194417] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 1 at offset 0xCFBA
[    6.194420] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 2 at offset 0xCFBB
[    6.194844] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 3 at offset 0xD127
[    6.194850] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 4 at offset 0xD170
[    6.194856] [drm] nouveau 0000:00:05.0: mem timing table length unknown: 14
[    6.194864] [drm] nouveau 0000:00:05.0: timingset 255 does not exist
[    6.311086] AMD64 EDAC driver v3.4.0
[    6.490569] ppdev: user-space parallel port driver
[    6.533801] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 18
[    6.533836] rtl8180 0000:04:0a.0: PCI INT A -> Link[LNKC] -> GSI 18 (level, low) -> IRQ 18
[    6.666961] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[    6.666968] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[    6.666972] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[    6.666976] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[    6.666979] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[    6.666982] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[    6.666985] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[    6.666989] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[    6.666992] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[    6.666996] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[    6.666999] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[    6.667003] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[    6.667006] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[    6.667009] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[    6.667012] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[    6.667016] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[    6.667019] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[    6.667023] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[    6.667026] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[    6.667030] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[    6.667033] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[    6.667036] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[    6.667039] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[    6.667043] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (600 mBi, 2000 mBm)
[    6.667046] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[    6.667050] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (600 mBi, 2000 mBm)
[    6.667053] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[    6.667057] cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (600 mBi, 2000 mBm)
[    6.871185] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    6.871954] ieee80211 phy0: hwaddr 0018e778b40a, RTL8185vD + rtl8225z2
[    7.046150] type=1400 audit(1313673605.761:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=559 comm="apparmor_parser"
[    7.046670] type=1400 audit(1313673605.761:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=559 comm="apparmor_parser"
[    7.047014] type=1400 audit(1313673605.761:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=559 comm="apparmor_parser"
[    7.048088] type=1400 audit(1313673605.761:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=560 comm="apparmor_parser"
[    7.048631] type=1400 audit(1313673605.761:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=560 comm="apparmor_parser"
[    7.048971] type=1400 audit(1313673605.761:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=560 comm="apparmor_parser"
[    7.084658] [drm] nouveau 0000:00:05.0: 1 available performance level(s)
[    7.084672] [drm] nouveau 0000:00:05.0: 0: memory 0MHz core 425MHz fanspeed 100%
[    7.084684] [drm] nouveau 0000:00:05.0: c: memory 0MHz
[    7.085027] [TTM] Zone  kernel: Available graphics memory: 995472 kiB.
[    7.085031] [TTM] Initializing pool allocator.
[    7.085056] [drm] nouveau 0000:00:05.0: Detected 64MiB VRAM
[    7.086906] [drm] nouveau 0000:00:05.0: 64 MiB GART (aperture)
[    7.086991] [drm] nouveau 0000:00:05.0: Saving VGA fonts
[    7.143019] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    7.143025] [drm] No driver support for vblank timestamp query.
[    7.143677] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0)
[    7.295436] [drm] nouveau 0000:00:05.0: allocated 1280x1024 fb: 0x49000, bo ffff8800768a8c00
[    7.298860] fbcon: nouveaufb (fb0) is primary device
[    7.302082] Console: switching to colour frame buffer device 160x64
[    7.302135] fb0: nouveaufb frame buffer device
[    7.302137] drm: registered panic notifier
[    7.302153] [drm] Initialized nouveau 0.0.16 20090420 for 0000:00:05.0 on minor 0
[    7.305630] EDAC amd64: DRAM ECC disabled.
[    7.305641] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[    7.305643]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[    7.305645]  (Note that use of the override may cause unknown side effects.)
[    7.511153] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[    7.511161] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[    7.511165] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[    7.511169] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[    7.511172] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[    7.511176] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[    7.511179] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[    7.511182] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[    7.511186] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[    7.511189] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[    7.511192] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[    7.511196] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[    7.511199] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[    7.511203] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[    7.511206] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[    7.511210] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[    7.511213] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[    7.511216] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[    7.511219] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[    7.511223] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[    7.511226] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[    7.511230] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[    7.511233] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[    7.511237] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[    7.511240] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[    7.511244] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[    7.511247] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[    7.511251] cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (300 mBi, 2000 mBm)
[    7.511255] cfg80211: World regulatory domain updated:
[    7.511258] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    7.511261] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.511265] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    7.511268] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    7.511272] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.511276] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.967711] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    8.106733] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 23
[    8.106745] Intel ICH 0000:00:10.2: PCI INT C -> Link[LACI] -> GSI 23 (level, low) -> IRQ 23
[    8.106789] Intel ICH 0000:00:10.2: setting latency timer to 64
[    8.440065] intel8x0_measure_ac97_clock: measured 50561 usecs (2488 samples)
[    8.440073] intel8x0: clocking to 46822
[   10.849834] type=1400 audit(1313673609.561:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=830 comm="apparmor_parser"
[   10.850887] type=1400 audit(1313673609.571:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=830 comm="apparmor_parser"
[   11.160422] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0)
[   11.160430] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B
[   11.635547] type=1400 audit(1313673610.351:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=849 comm="apparmor_parser"
[   11.636142] type=1400 audit(1313673610.351:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=849 comm="apparmor_parser"
[   12.599893] audit_printk_skb: 24 callbacks suppressed
[   12.599899] type=1400 audit(1313673611.311:20): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=868 comm="apparmor_parser"