[ 8074.770] X.Org X Server 1.9.0.902 (1.9.1 RC 2) Release Date: 2010-10-15 [ 8074.770] X Protocol Version 11, Revision 0 [ 8074.770] Build Operating System: Linux 2.6.24-25-server i686 Ubuntu [ 8074.771] Current Operating System: Linux Ubuntu-Natty 2.6.37-9-generic #22-Ubuntu SMP Fri Dec 10 10:05:11 UTC 2010 i686 [ 8074.771] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.37-9-generic root=UUID=c69c18e7-fffa-4f20-926b-20ef77ec26df ro quiet splash [ 8074.771] Build Date: 08 November 2010 08:05:30PM [ 8074.771] xorg-server 2:1.9.0.902-1ubuntu1 (For technical support please see http://www.ubuntu.com/support) [ 8074.771] Current version of pixman: 0.18.4 [ 8074.771] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 8074.771] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 8074.771] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 14 21:59:05 2010 [ 8074.772] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 8074.772] (==) No Layout section. Using the first Screen section. [ 8074.773] (==) No screen section available. Using defaults. [ 8074.773] (**) |-->Screen "Default Screen Section" (0) [ 8074.773] (**) | |-->Monitor "" [ 8074.773] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 8074.773] (==) Automatically adding devices [ 8074.773] (==) Automatically enabling devices [ 8074.774] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 8074.774] Entry deleted from font path. [ 8074.774] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins [ 8074.774] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 8074.774] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 8074.774] (II) Loader magic: 0x81f8e00 [ 8074.774] (II) Module ABI versions: [ 8074.774] X.Org ANSI C Emulation: 0.4 [ 8074.774] X.Org Video Driver: 8.0 [ 8074.774] X.Org XInput driver : 11.0 [ 8074.774] X.Org Server Extension : 4.0 [ 8074.776] (--) PCI:*(0:0:2:0) 8086:a011:1025:0349 rev 0, Mem @ 0x58180000/524288, 0x40000000/268435456, 0x58000000/1048576, I/O @ 0x000060c0/8 [ 8074.777] (--) PCI: (0:0:2:1) 8086:a012:1025:0349 rev 0, Mem @ 0x58100000/524288 [ 8074.777] (II) Open ACPI successful (/var/run/acpid.socket) [ 8074.777] (II) LoadModule: "extmod" [ 8074.778] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 8074.778] (II) Module extmod: vendor="X.Org Foundation" [ 8074.778] compiled for 1.9.0.902, module version = 1.0.0 [ 8074.779] Module class: X.Org Server Extension [ 8074.779] ABI class: X.Org Server Extension, version 4.0 [ 8074.779] (II) Loading extension MIT-SCREEN-SAVER [ 8074.779] (II) Loading extension XFree86-VidModeExtension [ 8074.779] (II) Loading extension XFree86-DGA [ 8074.779] (II) Loading extension DPMS [ 8074.779] (II) Loading extension XVideo [ 8074.779] (II) Loading extension XVideo-MotionCompensation [ 8074.779] (II) Loading extension X-Resource [ 8074.779] (II) LoadModule: "dbe" [ 8074.779] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 8074.780] (II) Module dbe: vendor="X.Org Foundation" [ 8074.780] compiled for 1.9.0.902, module version = 1.0.0 [ 8074.780] Module class: X.Org Server Extension [ 8074.780] ABI class: X.Org Server Extension, version 4.0 [ 8074.780] (II) Loading extension DOUBLE-BUFFER [ 8074.780] (II) LoadModule: "glx" [ 8074.780] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 8074.781] (II) Module glx: vendor="X.Org Foundation" [ 8074.781] compiled for 1.9.0.902, module version = 1.0.0 [ 8074.781] ABI class: X.Org Server Extension, version 4.0 [ 8074.781] (==) AIGLX enabled [ 8074.781] (II) Loading extension GLX [ 8074.781] (II) LoadModule: "record" [ 8074.781] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 8074.781] (II) Module record: vendor="X.Org Foundation" [ 8074.781] compiled for 1.9.0.902, module version = 1.13.0 [ 8074.782] Module class: X.Org Server Extension [ 8074.782] ABI class: X.Org Server Extension, version 4.0 [ 8074.782] (II) Loading extension RECORD [ 8074.782] (II) LoadModule: "dri" [ 8074.782] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 8074.782] (II) Module dri: vendor="X.Org Foundation" [ 8074.783] compiled for 1.9.0.902, module version = 1.0.0 [ 8074.783] ABI class: X.Org Server Extension, version 4.0 [ 8074.783] (II) Loading extension XFree86-DRI [ 8074.783] (II) LoadModule: "dri2" [ 8074.783] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 8074.783] (II) Module dri2: vendor="X.Org Foundation" [ 8074.783] compiled for 1.9.0.902, module version = 1.2.0 [ 8074.783] ABI class: X.Org Server Extension, version 4.0 [ 8074.783] (II) Loading extension DRI2 [ 8074.784] (==) Matched intel as autoconfigured driver 0 [ 8074.784] (==) Matched vesa as autoconfigured driver 1 [ 8074.784] (==) Matched fbdev as autoconfigured driver 2 [ 8074.784] (==) Assigned the driver to the xf86ConfigLayout [ 8074.784] (II) LoadModule: "intel" [ 8074.785] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 8074.794] (II) Module intel: vendor="X.Org Foundation" [ 8074.794] compiled for 1.9.0.902, module version = 2.13.901 [ 8074.794] Module class: X.Org Video Driver [ 8074.794] ABI class: X.Org Video Driver, version 8.0 [ 8074.794] (II) LoadModule: "vesa" [ 8074.795] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 8074.795] (II) Module vesa: vendor="X.Org Foundation" [ 8074.795] compiled for 1.9.0.902, module version = 2.3.0 [ 8074.795] Module class: X.Org Video Driver [ 8074.795] ABI class: X.Org Video Driver, version 8.0 [ 8074.795] (II) LoadModule: "fbdev" [ 8074.796] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 8074.796] (II) Module fbdev: vendor="X.Org Foundation" [ 8074.796] compiled for 1.8.99.905, module version = 0.4.2 [ 8074.796] ABI class: X.Org Video Driver, version 8.0 [ 8074.797] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge [ 8074.799] (II) VESA: driver for VESA chipsets: vesa [ 8074.799] (II) FBDEV: driver for framebuffer: fbdev [ 8074.799] (--) using VT number 7 [ 8074.813] (WW) Falling back to old probe method for vesa [ 8074.813] (WW) Falling back to old probe method for fbdev [ 8074.813] (II) Loading sub module "fbdevhw" [ 8074.813] (II) LoadModule: "fbdevhw" [ 8074.813] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 8074.814] (II) Module fbdevhw: vendor="X.Org Foundation" [ 8074.814] compiled for 1.9.0.902, module version = 0.0.2 [ 8074.814] ABI class: X.Org Video Driver, version 8.0 [ 8074.814] drmOpenDevice: node name is /dev/dri/card0 [ 8074.814] drmOpenDevice: open result is 9, (OK) [ 8074.815] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 8074.815] drmOpenDevice: node name is /dev/dri/card0 [ 8074.815] drmOpenDevice: open result is 9, (OK) [ 8074.815] drmOpenByBusid: drmOpenMinor returns 9 [ 8074.815] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 8074.815] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 8074.815] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 8074.815] (==) intel(0): RGB weight 888 [ 8074.815] (==) intel(0): Default visual is TrueColor [ 8074.815] (II) intel(0): Integrated Graphics Chipset: Intel(R) Pineview GM [ 8074.815] (--) intel(0): Chipset: "Pineview GM" [ 8074.816] (**) intel(0): Tiling enabled [ 8074.816] (**) intel(0): SwapBuffers wait enabled [ 8074.816] (==) intel(0): video overlay key set to 0x101fe [ 8074.816] (II) intel(0): Output LVDS1 has no monitor section [ 8074.916] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0 [ 8074.978] (II) intel(0): Output VGA1 has no monitor section [ 8074.978] (II) intel(0): EDID for output LVDS1 [ 8074.978] (II) intel(0): Manufacturer: AUO Model: 30d2 Serial#: 0 [ 8074.978] (II) intel(0): Year: 2008 Week: 1 [ 8074.978] (II) intel(0): EDID Version: 1.3 [ 8074.978] (II) intel(0): Digital Display Input [ 8074.978] (II) intel(0): Max Image Size [cm]: horiz.: 22 vert.: 13 [ 8074.978] (II) intel(0): Gamma: 2.20 [ 8074.978] (II) intel(0): No DPMS capabilities specified [ 8074.978] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 8074.978] (II) intel(0): First detailed timing is preferred mode [ 8074.978] (II) intel(0): redX: 0.588 redY: 0.351 greenX: 0.342 greenY: 0.567 [ 8074.978] (II) intel(0): blueX: 0.158 blueY: 0.123 whiteX: 0.313 whiteY: 0.329 [ 8074.979] (II) intel(0): Manufacturer's mask: 0 [ 8074.979] (II) intel(0): Supported detailed timing: [ 8074.979] (II) intel(0): clock: 52.0 MHz Image Size: 223 x 125 mm [ 8074.979] (II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0 [ 8074.979] (II) intel(0): v_active: 600 v_sync: 603 v_sync_end 604 v_blanking: 644 v_border: 0 [ 8074.979] (II) intel(0): Unknown vendor-specific block f [ 8074.979] (II) intel(0): AUO [ 8074.979] (II) intel(0): B101AW03 V0 [ 8074.979] (II) intel(0): EDID (in hex): [ 8074.979] (II) intel(0): 00ffffffffffff0006afd23000000000 [ 8074.979] (II) intel(0): 0112010380160d780ab9a59659579128 [ 8074.979] (II) intel(0): 1f505400000001010101010101010101 [ 8074.979] (II) intel(0): 0101010101015014004041582c201888 [ 8074.979] (II) intel(0): 3100df7d000000180000000f00000000 [ 8074.979] (II) intel(0): 00000000000000000020000000fe0041 [ 8074.979] (II) intel(0): 554f0a202020202020202020000000fe [ 8074.979] (II) intel(0): 004231303141573033205630200a003c [ 8074.979] (II) intel(0): EDID vendor "AUO", prod id 12498 [ 8074.979] (II) intel(0): Printing DDC gathered Modelines: [ 8074.980] (II) intel(0): Modeline "1024x600"x0.0 52.00 1024 1048 1184 1344 600 603 604 644 -hsync -vsync (38.7 kHz) [ 8074.980] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 8074.980] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 8074.980] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 8074.980] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 8074.980] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 8074.980] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 8074.980] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 8074.980] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) [ 8074.981] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 8074.981] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 8074.981] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 8074.981] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported) [ 8074.981] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported) [ 8074.981] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 8074.981] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 8074.981] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) [ 8074.981] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) [ 8074.981] (II) intel(0): Printing probed modes for output LVDS1 [ 8074.981] (II) intel(0): Modeline "1024x600"x60.1 52.00 1024 1048 1184 1344 600 603 604 644 -hsync -vsync (38.7 kHz) [ 8074.981] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 8074.981] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 8074.981] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 8075.041] (II) intel(0): EDID for output VGA1 [ 8075.041] (II) intel(0): Manufacturer: HSD Model: 5a47 Serial#: 16843009 [ 8075.041] (II) intel(0): Year: 2007 Week: 16 [ 8075.041] (II) intel(0): EDID Version: 1.3 [ 8075.041] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V [ 8075.041] (II) intel(0): Sync: Separate SyncOnGreen [ 8075.041] (II) intel(0): Max Image Size [cm]: horiz.: 37 vert.: 23 [ 8075.041] (II) intel(0): Gamma: 2.20 [ 8075.041] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display [ 8075.041] (II) intel(0): First detailed timing is preferred mode [ 8075.042] (II) intel(0): redX: 0.625 redY: 0.345 greenX: 0.325 greenY: 0.555 [ 8075.042] (II) intel(0): blueX: 0.155 blueY: 0.145 whiteX: 0.310 whiteY: 0.330 [ 8075.042] (II) intel(0): Supported established timings: [ 8075.042] (II) intel(0): 720x400@70Hz [ 8075.042] (II) intel(0): 640x480@60Hz [ 8075.042] (II) intel(0): 640x480@67Hz [ 8075.042] (II) intel(0): 640x480@72Hz [ 8075.042] (II) intel(0): 640x480@75Hz [ 8075.042] (II) intel(0): 800x600@56Hz [ 8075.042] (II) intel(0): 800x600@60Hz [ 8075.042] (II) intel(0): 800x600@72Hz [ 8075.042] (II) intel(0): 800x600@75Hz [ 8075.042] (II) intel(0): 832x624@75Hz [ 8075.042] (II) intel(0): 1024x768@60Hz [ 8075.042] (II) intel(0): 1024x768@70Hz [ 8075.042] (II) intel(0): 1024x768@75Hz [ 8075.042] (II) intel(0): 1280x1024@75Hz [ 8075.042] (II) intel(0): 1152x864@75Hz [ 8075.042] (II) intel(0): Manufacturer's mask: 0 [ 8075.042] (II) intel(0): Supported standard timings: [ 8075.042] (II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 8075.042] (II) intel(0): #1: hsize: 1280 vsize 720 refresh: 60 vid: 49281 [ 8075.043] (II) intel(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 8075.043] (II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 8075.043] (II) intel(0): #4: hsize: 1024 vsize 768 refresh: 66 vid: 18017 [ 8075.043] (II) intel(0): #5: hsize: 1400 vsize 1050 refresh: 75 vid: 20368 [ 8075.043] (II) intel(0): #6: hsize: 1440 vsize 900 refresh: 75 vid: 3989 [ 8075.043] (II) intel(0): Supported detailed timing: [ 8075.043] (II) intel(0): clock: 106.5 MHz Image Size: 408 x 255 mm [ 8075.043] (II) intel(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0 [ 8075.043] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0 [ 8075.043] (II) intel(0): Ranges: V min: 55 V max: 75 Hz, H min: 24 H max: 71 kHz, PixClock max 145 MHz [ 8075.043] (II) intel(0): Serial No: 716DY3CY09018 [ 8075.043] (II) intel(0): Monitor name: Hanns.G HW173 [ 8075.043] (II) intel(0): EDID (in hex): [ 8075.043] (II) intel(0): 00ffffffffffff002264475a01010101 [ 8075.043] (II) intel(0): 101101030a251778ea14c6a058538e27 [ 8075.043] (II) intel(0): 254f54bfef80818081c08140714f6146 [ 8075.043] (II) intel(0): 904f950f01019a29a0d0518422305098 [ 8075.043] (II) intel(0): 360098ff1000001e000000fd00374b18 [ 8075.044] (II) intel(0): 470e000a202020202020000000ff0037 [ 8075.044] (II) intel(0): 313644593343593039303138000000fc [ 8075.044] (II) intel(0): 0048616e6e732e47204857313733008e [ 8075.044] (II) intel(0): Not using mode "1400x1050" (bad mode clock/interlace/doublescan) [ 8075.044] (II) intel(0): Printing probed modes for output VGA1 [ 8075.044] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 +hsync +vsync (55.9 kHz) [ 8075.044] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [ 8075.044] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 8075.044] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz) [ 8075.044] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) [ 8075.044] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) [ 8075.044] (II) intel(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz) [ 8075.044] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) [ 8075.044] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 8075.044] (II) intel(0): Modeline "1024x768"x66.0 71.64 1024 1080 1192 1360 768 769 772 798 -hsync +vsync (52.7 kHz) [ 8075.045] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 8075.045] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) [ 8075.045] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) [ 8075.045] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [ 8075.045] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 8075.045] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 8075.045] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) [ 8075.045] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [ 8075.045] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) [ 8075.045] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 8075.045] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 8075.045] (II) intel(0): Output LVDS1 connected [ 8075.045] (II) intel(0): Output VGA1 connected [ 8075.045] (II) intel(0): Using fuzzy aspect match for initial modes [ 8075.045] (II) intel(0): Output LVDS1 using initial mode 800x600 [ 8075.045] (II) intel(0): Output VGA1 using initial mode 800x600 [ 8075.045] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 8075.046] (II) intel(0): Kernel page flipping support detected, enabling [ 8075.046] (**) intel(0): Display dimensions: (220, 130) mm [ 8075.046] (**) intel(0): DPI set to (92, 117) [ 8075.046] (II) Loading sub module "fb" [ 8075.046] (II) LoadModule: "fb" [ 8075.047] (II) Loading /usr/lib/xorg/modules/libfb.so [ 8075.047] (II) Module fb: vendor="X.Org Foundation" [ 8075.047] compiled for 1.9.0.902, module version = 1.0.0 [ 8075.047] ABI class: X.Org ANSI C Emulation, version 0.4 [ 8075.047] (II) UnloadModule: "vesa" [ 8075.047] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 8075.047] (II) UnloadModule: "fbdev" [ 8075.047] (II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 8075.047] (II) UnloadModule: "fbdevhw" [ 8075.047] (II) Unloading /usr/lib/xorg/modules/libfbdevhw.so [ 8075.047] (==) Depth 24 pixmap format is 32 bpp [ 8075.047] (==) intel(0): VideoRam: 262144 KB [ 8075.048] (II) intel(0): [DRI2] Setup complete [ 8075.048] (II) intel(0): [DRI2] DRI driver: i915 [ 8075.048] (II) intel(0): Allocated new frame buffer 832x600 stride 4096, tiled [ 8075.048] (II) UXA(0): Driver registered support for the following operations: [ 8075.048] (II) solid [ 8075.048] (II) copy [ 8075.048] (II) composite (RENDER acceleration) [ 8075.048] (II) put_image [ 8075.048] (II) get_image [ 8075.048] (==) intel(0): Backing store disabled [ 8075.048] (==) intel(0): Silken mouse enabled [ 8075.048] (II) intel(0): Initializing HW Cursor [ 8075.116] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 8075.121] (==) intel(0): DPMS enabled [ 8075.121] (==) intel(0): Intel XvMC decoder disabled [ 8075.121] (II) intel(0): Set up textured video [ 8075.122] (II) intel(0): Set up overlay video [ 8075.122] (II) intel(0): direct rendering: DRI2 Enabled [ 8075.122] (==) intel(0): hotplug detection: "enabled" [ 8075.123] (--) RandR disabled [ 8075.123] (II) Initializing built-in extension Generic Event Extension [ 8075.123] (II) Initializing built-in extension SHAPE [ 8075.123] (II) Initializing built-in extension MIT-SHM [ 8075.123] (II) Initializing built-in extension XInputExtension [ 8075.123] (II) Initializing built-in extension XTEST [ 8075.124] (II) Initializing built-in extension BIG-REQUESTS [ 8075.124] (II) Initializing built-in extension SYNC [ 8075.124] (II) Initializing built-in extension XKEYBOARD [ 8075.124] (II) Initializing built-in extension XC-MISC [ 8075.124] (II) Initializing built-in extension SECURITY [ 8075.124] (II) Initializing built-in extension XINERAMA [ 8075.124] (II) Initializing built-in extension XFIXES [ 8075.124] (II) Initializing built-in extension RENDER [ 8075.124] (II) Initializing built-in extension RANDR [ 8075.124] (II) Initializing built-in extension COMPOSITE [ 8075.124] (II) Initializing built-in extension DAMAGE [ 8075.124] (II) Initializing built-in extension GESTURE [ 8075.165] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 8075.165] (II) AIGLX: enabled GLX_INTEL_swap_event [ 8075.165] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 8075.165] (II) AIGLX: enabled GLX_SGI_make_current_read [ 8075.165] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 8075.166] (II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so [ 8075.166] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 8075.167] (II) intel(0): Setting screen physical size to 211 x 158 [ 8075.223] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 8075.253] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 8075.253] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 8075.253] (II) LoadModule: "evdev" [ 8075.254] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 8075.255] (II) Module evdev: vendor="X.Org Foundation" [ 8075.255] compiled for 1.9.0.902, module version = 2.3.2 [ 8075.255] Module class: X.Org XInput Driver [ 8075.255] ABI class: X.Org XInput driver, version 11.0 [ 8075.255] (**) Power Button: always reports core events [ 8075.255] (**) Power Button: Device: "/dev/input/event3" [ 8075.255] (II) Power Button: Found keys [ 8075.255] (II) Power Button: Configuring as keyboard [ 8075.255] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 8075.256] (**) Option "xkb_rules" "evdev" [ 8075.256] (**) Option "xkb_model" "evdev" [ 8075.256] (**) Option "xkb_layout" "es" [ 8075.262] (II) XKB: reuse xkmfile /var/lib/xkb/server-188C20793BE00CBD61865C180F610EC4A3A6D8CD.xkm [ 8075.265] (II) config/udev: Adding input device Video Bus (/dev/input/event7) [ 8075.265] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 8075.265] (**) Video Bus: always reports core events [ 8075.265] (**) Video Bus: Device: "/dev/input/event7" [ 8075.266] (II) Video Bus: Found keys [ 8075.266] (II) Video Bus: Configuring as keyboard [ 8075.266] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) [ 8075.266] (**) Option "xkb_rules" "evdev" [ 8075.266] (**) Option "xkb_model" "evdev" [ 8075.266] (**) Option "xkb_layout" "es" [ 8075.629] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 8075.629] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 8075.629] (**) Power Button: always reports core events [ 8075.629] (**) Power Button: Device: "/dev/input/event0" [ 8075.629] (II) Power Button: Found keys [ 8075.630] (II) Power Button: Configuring as keyboard [ 8075.630] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 8075.630] (**) Option "xkb_rules" "evdev" [ 8075.630] (**) Option "xkb_model" "evdev" [ 8075.630] (**) Option "xkb_layout" "es" [ 8075.631] (II) config/udev: Adding input device Lid Switch (/dev/input/event2) [ 8075.631] (II) No input driver/identifier specified (ignoring) [ 8075.632] (II) config/udev: Adding input device Sleep Button (/dev/input/event1) [ 8075.632] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 8075.633] (**) Sleep Button: always reports core events [ 8075.633] (**) Sleep Button: Device: "/dev/input/event1" [ 8075.633] (II) Sleep Button: Found keys [ 8075.633] (II) Sleep Button: Configuring as keyboard [ 8075.633] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD) [ 8075.633] (**) Option "xkb_rules" "evdev" [ 8075.633] (**) Option "xkb_model" "evdev" [ 8075.633] (**) Option "xkb_layout" "es" [ 8075.638] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8) [ 8075.638] (II) No input driver/identifier specified (ignoring) [ 8075.639] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9) [ 8075.639] (II) No input driver/identifier specified (ignoring) [ 8075.649] (II) config/udev: Adding input device WebCam (/dev/input/event5) [ 8075.649] (**) WebCam: Applying InputClass "evdev keyboard catchall" [ 8075.649] (**) WebCam: always reports core events [ 8075.649] (**) WebCam: Device: "/dev/input/event5" [ 8075.649] (II) WebCam: Found keys [ 8075.649] (II) WebCam: Configuring as keyboard [ 8075.649] (II) XINPUT: Adding extended input device "WebCam" (type: KEYBOARD) [ 8075.649] (**) Option "xkb_rules" "evdev" [ 8075.649] (**) Option "xkb_model" "evdev" [ 8075.649] (**) Option "xkb_layout" "es" [ 8075.661] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4) [ 8075.661] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 8075.661] (**) AT Translated Set 2 keyboard: always reports core events [ 8075.661] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event4" [ 8075.662] (II) AT Translated Set 2 keyboard: Found keys [ 8075.662] (II) AT Translated Set 2 keyboard: Configuring as keyboard [ 8075.662] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) [ 8075.662] (**) Option "xkb_rules" "evdev" [ 8075.662] (**) Option "xkb_model" "evdev" [ 8075.662] (**) Option "xkb_layout" "es" [ 8075.664] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event6) [ 8075.664] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall" [ 8075.664] (**) ImPS/2 Generic Wheel Mouse: always reports core events [ 8075.664] (**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event6" [ 8075.665] (II) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons [ 8075.665] (II) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s) [ 8075.665] (II) ImPS/2 Generic Wheel Mouse: Found relative axes [ 8075.665] (II) ImPS/2 Generic Wheel Mouse: Found x and y relative axes [ 8075.665] (II) ImPS/2 Generic Wheel Mouse: Configuring as mouse [ 8075.665] (**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5 [ 8075.665] (**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 8075.665] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE) [ 8075.665] (II) ImPS/2 Generic Wheel Mouse: initialized for relative axes. [ 8075.666] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0) [ 8075.666] (II) No input driver/identifier specified (ignoring) [ 8076.324] (II) intel(0): EDID vendor "AUO", prod id 12498 [ 8076.324] (II) intel(0): Printing DDC gathered Modelines: [ 8076.325] (II) intel(0): Modeline "1024x600"x0.0 52.00 1024 1048 1184 1344 600 603 604 644 -hsync -vsync (38.7 kHz) [ 8076.406] (II) intel(0): EDID vendor "AUO", prod id 12498 [ 8076.406] (II) intel(0): Printing DDC gathered Modelines: [ 8076.406] (II) intel(0): Modeline "1024x600"x0.0 52.00 1024 1048 1184 1344 600 603 604 644 -hsync -vsync (38.7 kHz) [ 8076.474] (II) intel(0): EDID vendor "AUO", prod id 12498 [ 8076.474] (II) intel(0): Printing DDC gathered Modelines: [ 8076.474] (II) intel(0): Modeline "1024x600"x0.0 52.00 1024 1048 1184 1344 600 603 604 644 -hsync -vsync (38.7 kHz) [ 8076.555] (II) intel(0): EDID vendor "AUO", prod id 12498 [ 8076.555] (II) intel(0): Printing DDC gathered Modelines: [ 8076.555] (II) intel(0): Modeline "1024x600"x0.0 52.00 1024 1048 1184 1344 600 603 604 644 -hsync -vsync (38.7 kHz) [ 8077.868] (II) intel(0): EDID vendor "AUO", prod id 12498 [ 8077.868] (II) intel(0): Printing DDC gathered Modelines: [ 8077.868] (II) intel(0): Modeline "1024x600"x0.0 52.00 1024 1048 1184 1344 600 603 604 644 -hsync -vsync (38.7 kHz) [ 8084.932] (II) Power Button: Close [ 8084.932] (II) UnloadModule: "evdev" [ 8084.964] (II) Video Bus: Close [ 8084.964] (II) UnloadModule: "evdev" [ 8084.980] (II) Power Button: Close [ 8084.980] (II) UnloadModule: "evdev" [ 8085.008] (II) Sleep Button: Close [ 8085.008] (II) UnloadModule: "evdev" [ 8085.036] (II) WebCam: Close [ 8085.196] (II) UnloadModule: "evdev" [ 8085.220] (II) AT Translated Set 2 keyboard: Close [ 8085.220] (II) UnloadModule: "evdev" [ 8085.220] (II) ImPS/2 Generic Wheel Mouse: Close [ 8085.221] (II) UnloadModule: "evdev" [ 8085.280] ddxSigGiveUp: Closing log