X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-15-server x86_64 Ubuntu
Current Operating System: Linux havelock 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:58:03 UTC 2009 x86_64
Build Date: 09 April 2009  02:11:54AM
xorg-server 2:1.6.0-0ubuntu14 (buildd@crested.buildd) 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue May 12 10:51:44 2009
(II) Loader magic: 0xb40
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0@0:2:0) Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf2000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
(II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers
(II) Matched intel from file name intel.ids
(==) Using default built-in configuration (48 lines)
(==) --- Start of built-in configuration ---
	Section "Device"
		Identifier	"Builtin Default intel Device 0"
		Driver	"intel"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default intel Screen 0"
		Device	"Builtin Default intel Device 0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default intel Device 0"
		Driver	"intel"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default intel Screen 0"
		Device	"Builtin Default intel Device 0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default i810 Device 0"
		Driver	"i810"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default i810 Screen 0"
		Device	"Builtin Default i810 Device 0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default vesa Device 0"
		Driver	"vesa"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default vesa Screen 0"
		Device	"Builtin Default vesa Device 0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default fbdev Device 0"
		Driver	"fbdev"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default fbdev Screen 0"
		Device	"Builtin Default fbdev Device 0"
	EndSection
	Section "ServerLayout"
		Identifier	"Builtin Default Layout"
		Screen	"Builtin Default intel Screen 0"
		Screen	"Builtin Default intel Screen 0"
		Screen	"Builtin Default i810 Screen 0"
		Screen	"Builtin Default vesa Screen 0"
		Screen	"Builtin Default fbdev Screen 0"
	EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
	Using a default monitor configuration.
(**) |-->Screen "Builtin Default intel Screen 0" (1)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
	Using a default monitor configuration.
(**) |-->Screen "Builtin Default i810 Screen 0" (2)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default i810 Device 0"
(==) No monitor specified for screen "Builtin Default i810 Screen 0".
	Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (3)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
	Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (4)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
	Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 2.6.3
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "i810"
(II) Loading /usr/lib/xorg/modules/drivers//i810_drv.so
(II) Module i810: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 2.6.3
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) UnloadModule: "i810"
(II) Unloading /usr/lib/xorg/modules/drivers//i810_drv.so
(II) Failed to load module "i810" (already loaded, 0)
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
	compiled for 1.5.99.902, module version = 1.3.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
	compiled for 1.5.99.902, module version = 0.4.0
	ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
	965GM, 965GME/GLE, G33, Q35, Q33,
	Mobile Intel® GM45 Express Chipset,
	Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 0.0.2
	ABI class: X.Org Video Driver, version 5.0
(EE) open /dev/fb0: No such file or directory
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 0.1.0
	ABI class: X.Org Video Driver, version 5.0
(II) intel(0): Creating default Display subsection in Screen section
	"Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) Mobile Intel® GM45 Express Chipset
(--) intel(0): Chipset: "Mobile Intel® GM45 Express Chipset"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xF2000000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(==) intel(0): Using EXA for acceleration
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA has no monitor section
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): Output HDMI-1 has no monitor section
(II) intel(0): I2C bus "HDMIDDC_B" initialized.
(II) intel(0): HDMI output 1 detected
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output HDMI-2 has no monitor section
(II) intel(0): I2C bus "HDMIDDC_C" initialized.
(II) intel(0): HDMI output 2 detected
(II) intel(0): Resizable framebuffer: not available (1 3)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz)
(II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C device "HDMIDDC_B:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "HDMIDDC_B:ddc2" registered at address 0xA0.
(II) intel(0): Output VGA connected
(II) intel(0): Output LVDS connected
(II) intel(0): Output HDMI-1 disconnected
(II) intel(0): Output HDMI-2 disconnected
(II) intel(0): Using fuzzy aspect match for initial modes
(II) intel(0): Output VGA using initial mode 1024x768
(II) intel(0): Output LVDS using initial mode 1024x768
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 32764 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (490, 320) mm
(**) intel(0): DPI set to (87, 133)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 2.4.0
	ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x10000120 to 0x38000120
(WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000b00 to 0x28000b00
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x80000206 to 0x80000246
(WW) intel(0): PIPEBSTAT before: status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS LBLC_EVENT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): Register 0x321b (FBC_FENCE_OFF) changed from 0x20000000 to 0x05001900
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux//libfbdevhw.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 1248000 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 4991996 kB available
(WW) intel(0): DRI2 requires UXA
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] loaded kernel module for "i915" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xf2000000
(II) intel(0): [dri] visual configs initialized
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 36126720 bytes
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): Disable render standby.
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d78b000 (pgoffset 55179)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x000b7fff: compressed frame buffer (736 kB, 0x00000000be000000 physical
)
(II) intel(0): 0x000b8000-0x000b8fff: power context (4 kB)
(II) intel(0): 0x01fff000:            end of stolen memory
(II) intel(0): 0x01fff000-0x0d78afff: DRI memory manager (187952 kB)
(II) intel(0): 0x0d78b000-0x0f9fefff: exa offscreen (35280 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x01fff000:            start of memory manager
(II) intel(0): 0x02020000-0x02b9bfff: depth buffer (11760 kB) Y tiled
(II) intel(0): 0x03020000-0x03b9bfff: back buffer (11760 kB) X tiled
(II) intel(0): 0x04020000-0x04b9bfff: front buffer (11760 kB) X tiled
(II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
(II) intel(0): 0x0d78b000:            end of memory manager
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane A is now enabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe A
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output HDMI-1 is connected to pipe none
(II) intel(0):   Output HDMI-2 is connected to pipe none
(II) intel(0): [drm] mapped front buffer at 0xd4020000, handle = 0xd4020000
(II) intel(0): [drm] mapped back buffer at 0xd3020000, handle = 0xd3020000
(II) intel(0): [drm] mapped depth buffer at 0xd2020000, handle = 0xd2020000
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: XF86DRI Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 261 x 163
(II) config/hal: Adding input device ThinkPad Extra Buttons
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 2.1.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(**) ThinkPad Extra Buttons: always reports core events
(**) ThinkPad Extra Buttons: Device: "/dev/input/event11"
(II) ThinkPad Extra Buttons: Found keys
(II) ThinkPad Extra Buttons: Configuring as keyboard
(II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) ThinkPad Extra Buttons: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) ThinkPad Extra Buttons: xkb_model: "pc105"
(**) Option "xkb_layout" "fi"
(**) ThinkPad Extra Buttons: xkb_layout: "fi"
(**) Option "xkb_options" "lv3:ralt_switch"
(**) ThinkPad Extra Buttons: xkb_options: "lv3:ralt_switch"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) AT Translated Set 2 keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "fi"
(**) AT Translated Set 2 keyboard: xkb_layout: "fi"
(**) Option "xkb_options" "lv3:ralt_switch"
(**) AT Translated Set 2 keyboard: xkb_options: "lv3:ralt_switch"
(II) config/hal: Adding input device   USB Keyboard
(**)   USB Keyboard: always reports core events
(**)   USB Keyboard: Device: "/dev/input/event6"
(II)   USB Keyboard: Found keys
(II)   USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "  USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**)   USB Keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**)   USB Keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "fi"
(**)   USB Keyboard: xkb_layout: "fi"
(**) Option "xkb_options" "lv3:ralt_switch"
(**)   USB Keyboard: xkb_options: "lv3:ralt_switch"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event9"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Video Bus: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) Video Bus: xkb_model: "pc105"
(**) Option "xkb_layout" "fi"
(**) Video Bus: xkb_layout: "fi"
(**) Option "xkb_options" "lv3:ralt_switch"
(**) Video Bus: xkb_options: "lv3:ralt_switch"
(II) config/hal: Adding input device   USB Keyboard
(**)   USB Keyboard: always reports core events
(**)   USB Keyboard: Device: "/dev/input/event5"
(II)   USB Keyboard: Found keys
(II)   USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "  USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**)   USB Keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**)   USB Keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "fi"
(**)   USB Keyboard: xkb_layout: "fi"
(**) Option "xkb_options" "lv3:ralt_switch"
(**)   USB Keyboard: xkb_options: "lv3:ralt_switch"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event3"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(**) TPPS/2 IBM TrackPoint: always reports core events
(**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event12"
(II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
(II) TPPS/2 IBM TrackPoint: Found x and y relative axes
(II) TPPS/2 IBM TrackPoint: Configuring as mouse
(**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
(**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
(**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
(**) TPPS/2 IBM TrackPoint: (accel) filter chain progression: 2.00
(**) TPPS/2 IBM TrackPoint: (accel) filter stage 0: 20.00 ms
(**) TPPS/2 IBM TrackPoint: (accel) set acceleration profile 0
(II) config/hal: Adding input device Logitech Optical USB Mouse
(**) Logitech Optical USB Mouse: always reports core events
(**) Logitech Optical USB Mouse: Device: "/dev/input/event7"
(II) Logitech Optical USB Mouse: Found 3 mouse buttons
(II) Logitech Optical USB Mouse: Found x and y relative axes
(II) Logitech Optical USB Mouse: Configuring as mouse
(**) Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE)
(**) Logitech Optical USB Mouse: (accel) keeping acceleration scheme 1
(**) Logitech Optical USB Mouse: (accel) filter chain progression: 2.00
(**) Logitech Optical USB Mouse: (accel) filter stage 0: 20.00 ms
(**) Logitech Optical USB Mouse: (accel) set acceleration profile 0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(EE) Logitech Optical USB Mouse: Read error: No such device
(II) config/hal: removing device Logitech Optical USB Mouse
(II) Logitech Optical USB Mouse: Close
(II) UnloadModule: "evdev"
(II) config/hal: Adding input device Logitech Optical USB Mouse
(**) Logitech Optical USB Mouse: always reports core events
(**) Logitech Optical USB Mouse: Device: "/dev/input/event7"
(II) Logitech Optical USB Mouse: Found 3 mouse buttons
(II) Logitech Optical USB Mouse: Found x and y relative axes
(II) Logitech Optical USB Mouse: Configuring as mouse
(**) Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE)
(**) Logitech Optical USB Mouse: (accel) keeping acceleration scheme 1
(**) Logitech Optical USB Mouse: (accel) filter chain progression: 2.00
(**) Logitech Optical USB Mouse: (accel) filter stage 0: 20.00 ms
(**) Logitech Optical USB Mouse: (accel) set acceleration profile 0
(EE) Logitech Optical USB Mouse: Read error: No such device
(II) config/hal: removing device Logitech Optical USB Mouse
(II) Logitech Optical USB Mouse: Close
(II) UnloadModule: "evdev"
(EE)   USB Keyboard: Read error: No such device
(EE)   USB Keyboard: Read error: No such device
(II) config/hal: removing device   USB Keyboard
(II)   USB Keyboard: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device   USB Keyboard
(II)   USB Keyboard: Close
(II) UnloadModule: "evdev"
(II) PM Event received: Capability Changed
I830PMEvent: Capability change
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) PM Event received: Capability Changed
I830PMEvent: Capability change
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C device "HDMIDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "HDMIDDC_C:ddc2" registered at address 0xA0.
(II) PM Event received: Capability Changed
I830PMEvent: Capability change
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) config/hal: Adding input device   USB Keyboard
(**)   USB Keyboard: always reports core events
(**)   USB Keyboard: Device: "/dev/input/event5"
(II)   USB Keyboard: Found keys
(II)   USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "  USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**)   USB Keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**)   USB Keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "fi"
(**)   USB Keyboard: xkb_layout: "fi"
(**) Option "xkb_options" "lv3:ralt_switch"
(**)   USB Keyboard: xkb_options: "lv3:ralt_switch"
(II) config/hal: Adding input device   USB Keyboard
(**)   USB Keyboard: always reports core events
(**)   USB Keyboard: Device: "/dev/input/event6"
(II)   USB Keyboard: Found keys
(II)   USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "  USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**)   USB Keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**)   USB Keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "fi"
(**)   USB Keyboard: xkb_layout: "fi"
(**) Option "xkb_options" "lv3:ralt_switch"
(**)   USB Keyboard: xkb_options: "lv3:ralt_switch"
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) config/hal: Adding input device Logitech Optical USB Mouse
(**) Logitech Optical USB Mouse: always reports core events
(**) Logitech Optical USB Mouse: Device: "/dev/input/event7"
(II) Logitech Optical USB Mouse: Found 3 mouse buttons
(II) Logitech Optical USB Mouse: Found x and y relative axes
(II) Logitech Optical USB Mouse: Configuring as mouse
(**) Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE)
(**) Logitech Optical USB Mouse: (accel) keeping acceleration scheme 1
(**) Logitech Optical USB Mouse: (accel) filter chain progression: 2.00
(**) Logitech Optical USB Mouse: (accel) filter stage 0: 20.00 ms
(**) Logitech Optical USB Mouse: (accel) set acceleration profile 0
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d78b000 (pgoffset 55179)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x000b7fff: compressed frame buffer (736 kB, 0x00000000be000000 physical
)
(II) intel(0): 0x000b8000-0x000b8fff: power context (4 kB)
(II) intel(0): 0x01fff000:            end of stolen memory
(II) intel(0): 0x01fff000-0x0d78afff: DRI memory manager (187952 kB)
(II) intel(0): 0x0d78b000-0x0f9fefff: exa offscreen (35280 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x01fff000:            start of memory manager
(II) intel(0): 0x02020000-0x02b9bfff: depth buffer (11760 kB) Y tiled
(II) intel(0): 0x03020000-0x03b9bfff: back buffer (11760 kB) X tiled
(II) intel(0): 0x04020000-0x04b9bfff: front buffer (11760 kB) X tiled
(II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
(II) intel(0): 0x0d78b000:            end of memory manager
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane A is now enabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe A
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output HDMI-1 is connected to pipe none
(II) intel(0):   Output HDMI-2 is connected to pipe none
(II) intel(0): [drm] mapped front buffer at 0xd4020000, handle = 0x2fff9000
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II)   USB Keyboard: Device reopened after 1 attempts.
(II)   USB Keyboard: Device reopened after 1 attempts.
(II) Logitech Optical USB Mouse: Device reopened after 1 attempts.
(EE) Logitech Optical USB Mouse: Read error: No such device
(II) config/hal: removing device Logitech Optical USB Mouse
(II) Logitech Optical USB Mouse: Close
(II) UnloadModule: "evdev"
(II) config/hal: Adding input device Logitech Optical USB Mouse
(**) Logitech Optical USB Mouse: always reports core events
(**) Logitech Optical USB Mouse: Device: "/dev/input/event7"
(II) Logitech Optical USB Mouse: Found 3 mouse buttons
(II) Logitech Optical USB Mouse: Found x and y relative axes
(II) Logitech Optical USB Mouse: Configuring as mouse
(**) Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE)
(**) Logitech Optical USB Mouse: (accel) keeping acceleration scheme 1
(**) Logitech Optical USB Mouse: (accel) filter chain progression: 2.00
(**) Logitech Optical USB Mouse: (accel) filter stage 0: 20.00 ms
(**) Logitech Optical USB Mouse: (accel) set acceleration profile 0
(EE) Logitech Optical USB Mouse: Read error: No such device
(II) config/hal: removing device Logitech Optical USB Mouse
(II) Logitech Optical USB Mouse: Close
(II) UnloadModule: "evdev"
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) config/hal: Adding input device Logitech Optical USB Mouse
(**) Logitech Optical USB Mouse: always reports core events
(**) Logitech Optical USB Mouse: Device: "/dev/input/event7"
(II) Logitech Optical USB Mouse: Found 3 mouse buttons
(II) Logitech Optical USB Mouse: Found x and y relative axes
(II) Logitech Optical USB Mouse: Configuring as mouse
(**) Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE)
(**) Logitech Optical USB Mouse: (accel) keeping acceleration scheme 1
(**) Logitech Optical USB Mouse: (accel) filter chain progression: 2.00
(**) Logitech Optical USB Mouse: (accel) filter stage 0: 20.00 ms
(**) Logitech Optical USB Mouse: (accel) set acceleration profile 0
(II) PM Event received: Capability Changed
I830PMEvent: Capability change
(EE)   USB Keyboard: Read error: No such device
(EE)   USB Keyboard: Read error: No such device
(EE) Logitech Optical USB Mouse: Read error: No such device
(II) config/hal: removing device   USB Keyboard
(II)   USB Keyboard: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device   USB Keyboard
(II)   USB Keyboard: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device Logitech Optical USB Mouse
(II) Logitech Optical USB Mouse: Close
(II) UnloadModule: "evdev"
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) PM Event received: Capability Changed
I830PMEvent: Capability change
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) PM Event received: Capability Changed
I830PMEvent: Capability change
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d78b000 (pgoffset 55179)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x000b7fff: compressed frame buffer (736 kB, 0x00000000be000000 physical
)
(II) intel(0): 0x000b8000-0x000b8fff: power context (4 kB)
(II) intel(0): 0x01fff000:            end of stolen memory
(II) intel(0): 0x01fff000-0x0d78afff: DRI memory manager (187952 kB)
(II) intel(0): 0x0d78b000-0x0f9fefff: exa offscreen (35280 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x01fff000:            start of memory manager
(II) intel(0): 0x02020000-0x02b9bfff: depth buffer (11760 kB) Y tiled
(II) intel(0): 0x03020000-0x03b9bfff: back buffer (11760 kB) X tiled
(II) intel(0): 0x04020000-0x04b9bfff: front buffer (11760 kB) X tiled
(II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
(II) intel(0): 0x0d78b000:            end of memory manager
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output HDMI-1 is connected to pipe none
(II) intel(0):   Output HDMI-2 is connected to pipe none
(II) intel(0): [drm] mapped front buffer at 0xd4020000, handle = 0x2fffa000
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) PM Event received: Capability Changed
I830PMEvent: Capability change
(II) config/hal: Adding input device   USB Keyboard
(**)   USB Keyboard: always reports core events
(**)   USB Keyboard: Device: "/dev/input/event5"
(II)   USB Keyboard: Found keys
(II)   USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "  USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**)   USB Keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**)   USB Keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "fi"
(**)   USB Keyboard: xkb_layout: "fi"
(**) Option "xkb_options" "lv3:ralt_switch"
(**)   USB Keyboard: xkb_options: "lv3:ralt_switch"
(II) config/hal: Adding input device   USB Keyboard
(**)   USB Keyboard: always reports core events
(**)   USB Keyboard: Device: "/dev/input/event6"
(II)   USB Keyboard: Found keys
(II)   USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "  USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**)   USB Keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**)   USB Keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "fi"
(**)   USB Keyboard: xkb_layout: "fi"
(**) Option "xkb_options" "lv3:ralt_switch"
(**)   USB Keyboard: xkb_options: "lv3:ralt_switch"
(II) config/hal: Adding input device Logitech Optical USB Mouse
(**) Logitech Optical USB Mouse: always reports core events
(**) Logitech Optical USB Mouse: Device: "/dev/input/event7"
(II) Logitech Optical USB Mouse: Found 3 mouse buttons
(II) Logitech Optical USB Mouse: Found x and y relative axes
(II) Logitech Optical USB Mouse: Configuring as mouse
(**) Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE)
(**) Logitech Optical USB Mouse: (accel) keeping acceleration scheme 1
(**) Logitech Optical USB Mouse: (accel) filter chain progression: 2.00
(**) Logitech Optical USB Mouse: (accel) filter stage 0: 20.00 ms
(**) Logitech Optical USB Mouse: (accel) set acceleration profile 0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C bus "CRTDDC_D" initialized.
(II) intel(0): I2C device "CRTDDC_D:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_D:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_D:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_D:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_D" removed.
(II) intel(0): I2C bus "CRTDDC_E" initialized.
(II) intel(0): I2C device "CRTDDC_E:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_E:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_E:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_E:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_E" removed.
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C bus "CRTDDC_D" initialized.
(II) intel(0): I2C device "CRTDDC_D:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_D:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_D:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_D:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_D" removed.
(II) intel(0): I2C bus "CRTDDC_E" initialized.
(II) intel(0): I2C device "CRTDDC_E:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_E:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_E:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_E:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_E" removed.
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "GSM", prod id 22201
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(EE) Logitech Optical USB Mouse: Read error: No such device
(II) config/hal: removing device Logitech Optical USB Mouse
(II) Logitech Optical USB Mouse: Close
(II) UnloadModule: "evdev"
(II) config/hal: Adding input device Logitech Optical USB Mouse
(**) Logitech Optical USB Mouse: always reports core events
(**) Logitech Optical USB Mouse: Device: "/dev/input/event7"
(II) Logitech Optical USB Mouse: Found 3 mouse buttons
(II) Logitech Optical USB Mouse: Found x and y relative axes
(II) Logitech Optical USB Mouse: Configuring as mouse
(**) Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE)
(**) Logitech Optical USB Mouse: (accel) keeping acceleration scheme 1
(**) Logitech Optical USB Mouse: (accel) filter chain progression: 2.00
(**) Logitech Optical USB Mouse: (accel) filter stage 0: 20.00 ms
(**) Logitech Optical USB Mouse: (accel) set acceleration profile 0
(EE) Logitech Optical USB Mouse: Read error: No such device
(II) config/hal: removing device Logitech Optical USB Mouse
(II) Logitech Optical USB Mouse: Close
(II) UnloadModule: "evdev"