X.Org X Server 1.6.0 Release Date: 2009-2-25 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-23-server i686 Ubuntu Current Operating System: Linux chronos 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 i686 Build Date: 09 April 2009 02:10:02AM xorg-server 2:1.6.0-0ubuntu14 (buildd@rothera.buildd) Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Mon May 18 12:04:44 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Configured Monitor" (**) | |-->Device "Configured Video Device" (**) Option "DontZap" "false" (**) Option "DontZoom" "false" (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to "/usr/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (II) Loader magic: 0x3bc0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (++) using VT number 7 (--) PCI:*(0@0:2:0) Intel Corporation 82G35 Express Integrated Graphics Controller rev 3, Mem @ 0xfe700000/1048576, 0xd0000000/268435456, I/O @ 0x0000cc00/8 (II) Open ACPI successful (/var/run/acpid.socket) (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) "extmod" will be loaded by default. (II) "dbe" will be loaded by default. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded by default. (II) "dri" will be loaded by default. (II) "dri2" will be loaded by default. (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.6.0, module version = 2.7.99 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile Intel® GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41 (II) Primary Device is: PCI 00@00:02:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.6.0, module version = 0.1.0 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (**) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (**) intel(0): Option "Tiling" "True" (II) intel(0): Integrated Graphics Chipset: Intel(R) G35 (--) intel(0): Chipset: "G35" (--) intel(0): Linear framebuffer at 0xD0000000 (--) intel(0): IO registers at addr 0xFE700000 (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB (--) intel(0): Using UXA for acceleration (II) intel(0): 2 display pipes available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA using monitor section Configured Monitor (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70. (II) intel(0): I2C bus "SDVOB DDC Bus" initialized. (II) intel(0): Output TMDS-1 has no monitor section (II) intel(0): SDVOB: device VID/DID: 04:AE.00, clock range 25.0MHz - 165.0MHz (II) intel(0): SDVOB: 1 input channel (II) intel(0): SDVOB: TMDS0 output reported (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72. (II) intel(0): No SDVO device found on SDVOC (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed. (II) intel(0): Current clock rate multiplier: 1 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): I2C bus "CRTDDC_D" initialized. (II) intel(0): I2C device "CRTDDC_D:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_D:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_D:ddc2" removed. (II) intel(0): I2C device "CRTDDC_D:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_D" removed. (II) intel(0): I2C bus "CRTDDC_E" initialized. (II) intel(0): I2C device "CRTDDC_E:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_E:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_E:ddc2" removed. (II) intel(0): I2C device "CRTDDC_E:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_E" removed. (II) intel(0): Output VGA connected (II) intel(0): Output TMDS-1 disconnected (II) intel(0): Using user preference for initial modes (II) intel(0): Output VGA using initial mode 1680x1050@60 (II) intel(0): detected 512 kB GTT. (II) intel(0): detected 7676 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (**) intel(0): Display dimensions: (474, 296) mm (**) intel(0): DPI set to (90, 90) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) intel(0): Comparing regs from server start up to After PreInit (WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000000 to 0x00000b00 (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) intel(0): Kernel reported 489216 total, 1 used (II) intel(0): I830CheckAvailableMemory: 1956860 kB available drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: drmOpenMinor returns 11 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) intel(0): [DRI2] Setup complete (**) intel(0): Framebuffer compression disabled (**) intel(0): Tiling enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) UXA(0): Driver registered support for the following operations: (II) solid (II) copy (II) composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (WW) intel(0): drmSetMaster failed: 2.6.29 or newer kernel required for multi-server DRI (II) intel(0): Current clock rate multiplier: 1 (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x0077f000: end of stolen memory (II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x0077f000: start of memory manager (II) intel(0): 0x0079f000-0x00eccfff: front buffer (7352 kB) X tiled (II) intel(0): 0x00f9f000-0x00f9ffff: overlay registers (4 kB) (II) intel(0): 0x00fa0000-0x00fa9fff: HW cursors (40 kB) (II) intel(0): 0x10000000: end of memory manager (II) intel(0): Output configuration: (II) intel(0): Pipe A is on (II) intel(0): Display plane A is now enabled and connected to pipe A. (II) intel(0): Pipe B is off (II) intel(0): Display plane B is now disabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe A (II) intel(0): Output TMDS-1 is connected to pipe none (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (II) intel(0): DPMS enabled (II) intel(0): Set up textured video (II) intel(0): Set up overlay video (II) intel(0): direct rendering: DRI2 Enabled (WW) intel(0): Option "AccelMethod" is not used (WW) intel(0): Option "MigrationHeuristic" is not used (WW) intel(0): Option "EXAOptimizeMigration" is not used (WW) intel(0): Option "XVideo" is not used (WW) intel(0): Option "PageFlip" is not used (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so (II) GLX: Initialized DRI2 GL provider for screen 0 (II) intel(0): Setting screen physical size to 474 x 296 (II) config/hal: Adding input device LITEON Technology USB Multimedia Keyboard (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.6.0, module version = 2.1.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) LITEON Technology USB Multimedia Keyboard: always reports core events (**) LITEON Technology USB Multimedia Keyboard: Device: "/dev/input/event3" (II) LITEON Technology USB Multimedia Keyboard: Found keys (II) LITEON Technology USB Multimedia Keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "LITEON Technology USB Multimedia Keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) LITEON Technology USB Multimedia Keyboard: xkb_rules: "evdev" (**) Option "xkb_model" "pc105" (**) LITEON Technology USB Multimedia Keyboard: xkb_model: "pc105" (**) Option "xkb_layout" "ch" (**) LITEON Technology USB Multimedia Keyboard: xkb_layout: "ch" (**) Option "xkb_options" "lv3:ralt_switch" (**) LITEON Technology USB Multimedia Keyboard: xkb_options: "lv3:ralt_switch" (II) config/hal: Adding input device Macintosh mouse button emulation (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event2" (II) Macintosh mouse button emulation: Found 3 mouse buttons (II) Macintosh mouse button emulation: Found x and y relative axes (II) Macintosh mouse button emulation: Configuring as mouse (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1 (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00 (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms (**) Macintosh mouse button emulation: (accel) set acceleration profile 0 (II) config/hal: Adding input device Logitech USB Optical Mouse (**) Logitech USB Optical Mouse: always reports core events (**) Logitech USB Optical Mouse: Device: "/dev/input/event4" (II) Logitech USB Optical Mouse: Found 8 mouse buttons (II) Logitech USB Optical Mouse: Found x and y relative axes (II) Logitech USB Optical Mouse: Configuring as mouse (**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5 (**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE) (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1 (**) Logitech USB Optical Mouse: (accel) filter chain progression: 2.00 (**) Logitech USB Optical Mouse: (accel) filter stage 0: 20.00 ms (**) Logitech USB Optical Mouse: (accel) set acceleration profile 0 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): I2C bus "CRTDDC_D" initialized. (II) intel(0): I2C device "CRTDDC_D:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_D:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_D:ddc2" removed. (II) intel(0): I2C device "CRTDDC_D:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_D" removed. (II) intel(0): I2C bus "CRTDDC_E" initialized. (II) intel(0): I2C device "CRTDDC_E:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_E:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_E:ddc2" removed. (II) intel(0): I2C device "CRTDDC_E:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_E" removed. (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): I2C bus "CRTDDC_D" initialized. (II) intel(0): I2C device "CRTDDC_D:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_D:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_D:ddc2" removed. (II) intel(0): I2C device "CRTDDC_D:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_D" removed. (II) intel(0): I2C bus "CRTDDC_E" initialized. (II) intel(0): I2C device "CRTDDC_E:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_E:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_E:ddc2" removed. (II) intel(0): I2C device "CRTDDC_E:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_E" removed. (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): I2C bus "CRTDDC_D" initialized. (II) intel(0): I2C device "CRTDDC_D:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_D:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_D:ddc2" removed. (II) intel(0): I2C device "CRTDDC_D:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_D" removed. (II) intel(0): I2C bus "CRTDDC_E" initialized. (II) intel(0): I2C device "CRTDDC_E:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_E:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_E:ddc2" removed. (II) intel(0): I2C device "CRTDDC_E:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_E" removed. (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): I2C bus "CRTDDC_D" initialized. (II) intel(0): I2C device "CRTDDC_D:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_D:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_D:ddc2" removed. (II) intel(0): I2C device "CRTDDC_D:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_D" removed. (II) intel(0): I2C bus "CRTDDC_E" initialized. (II) intel(0): I2C device "CRTDDC_E:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_E:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_E:ddc2" removed. (II) intel(0): I2C device "CRTDDC_E:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_E" removed. (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): I2C bus "CRTDDC_D" initialized. (II) intel(0): I2C device "CRTDDC_D:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_D:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_D:ddc2" removed. (II) intel(0): I2C device "CRTDDC_D:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_D" removed. (II) intel(0): I2C bus "CRTDDC_E" initialized. (II) intel(0): I2C device "CRTDDC_E:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_E:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_E:ddc2" removed. (II) intel(0): I2C device "CRTDDC_E:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_E" removed. (II) LITEON Technology USB Multimedia Keyboard: Close (II) UnloadModule: "evdev" (II) Macintosh mouse button emulation: Close (II) UnloadModule: "evdev" (II) Logitech USB Optical Mouse: Close (II) UnloadModule: "evdev" (WW) intel(0): drmDropMaster failed: Invalid argument ddxSigGiveUp: Closing log