[ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #40-Ubuntu SMP Fri Apr 3 17:39:51 UTC 2009 (Ubuntu 2.6.28-11.40-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fffb000 (usable) [ 0.000000] BIOS-e820: 000000007fffb000 - 000000007ffff000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ffff000 - 0000000080000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x7fffb max_arch_pfn = 0x100000 [ 0.000000] Scanning 2 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable) [ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 0000000000092c00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007fffb000 (usable) [ 0.000000] modified: 000000007fffb000 - 000000007ffff000 (ACPI data) [ 0.000000] modified: 000000007ffff000 - 0000000080000000 (ACPI NVS) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000 [ 0.000000] RAMDISK: 7f879000 - 7ffeabfd [ 0.000000] Allocated new RAMDISK: 00881000 - 00ff2bfd [ 0.000000] Move RAMDISK from 000000007f879000 - 000000007ffeabfc to 00881000 - 00ff2bfc [ 0.000000] ACPI: RSDP 000F5E30, 0014 (r0 ASUS ) [ 0.000000] ACPI: RSDT 7FFFB000, 0030 (r1 ASUS A7V600-X 42302E31 MSFT 31313031) [ 0.000000] ACPI: FACP 7FFFB0B2, 0074 (r1 ASUS A7V600-X 42302E31 MSFT 31313031) [ 0.000000] ACPI: DSDT 7FFFB126, 3098 (r1 ASUS A7V600-X 1000 MSFT 100000B) [ 0.000000] ACPI: FACS 7FFFF000, 0040 [ 0.000000] ACPI: BOOT 7FFFB030, 0028 (r1 ASUS A7V600-X 42302E31 MSFT 31313031) [ 0.000000] ACPI: APIC 7FFFB058, 005A (r1 ASUS A7V600-X 42302E31 MSFT 31313031) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1163MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 00000000 - 373fe000 [ 0.000000] bootmap 00012000 - 00018e80 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000 - 000087c52c] [ 0.000000] #4 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000 - 0000881000] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000881000 - 0000ff2bfd] NEW RAMDISK ==> [0000881000 - 0000ff2bfd] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x0007fffb [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x00000007 [ 0.000000] 0: 0x00000010 -> 0x00000092 [ 0.000000] 0: 0x00000100 -> 0x0007fffb [ 0.000000] On node 0 totalpages: 524160 [ 0.000000] free_area_init_node: node 0, pgdat c06d0f00, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3941 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2328 pages used for memmap [ 0.000000] HighMem zone: 295653 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0xe408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000 [ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520064 [ 0.000000] Kernel command line: root=UUID=99ecad57-9ff2-483f-8d02-ed2878d18663 ro quiet splash [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2200.282 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] allocated 10485660 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] Scanning for low memory corruption every 60 seconds [ 0.004000] Memory: 2052996k/2097132k available (4126k kernel code, 42844k reserved, 2208k data, 532k init, 1191924k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB) [ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB) [ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.004020] Calibrating delay loop (skipped), value calculated using timer frequency.. 4400.56 BogoMIPS (lpj=8801128) [ 0.004050] Security Framework initialized [ 0.004065] SELinux: Disabled at boot. [ 0.004108] AppArmor: AppArmor initialized [ 0.004120] Mount-cache hash table entries: 512 [ 0.004345] Initializing cgroup subsys ns [ 0.004351] Initializing cgroup subsys cpuacct [ 0.004353] Initializing cgroup subsys memory [ 0.004359] Initializing cgroup subsys freezer [ 0.004378] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004381] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004407] Checking 'hlt' instruction... OK. [ 0.020581] SMP alternatives: switching to UP code [ 0.160508] Freeing SMP alternatives: 18k freed [ 0.160515] ACPI: Core revision 20080926 [ 0.162345] ACPI: Checking initramfs for custom DSDT [ 0.440254] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.479948] CPU0: AMD Athlon(TM) XP 3200+ stepping 00 [ 0.480001] Brought up 1 CPUs [ 0.480001] Total of 1 processors activated (4400.56 BogoMIPS). [ 0.480001] CPU0 attaching NULL sched-domain. [ 0.480001] net_namespace: 776 bytes [ 0.480001] Booting paravirtualized kernel on bare hardware [ 0.480001] Time: 17:36:21 Date: 04/08/09 [ 0.480001] regulator: core version 0.5 [ 0.480001] NET: Registered protocol family 16 [ 0.480001] EISA bus registered [ 0.480001] ACPI: bus type pci registered [ 0.480001] PCI: PCI BIOS revision 2.10 entry at 0xf1970, last bus=1 [ 0.480001] PCI: Using configuration type 1 for base access [ 0.480202] ACPI: EC: Look up EC in DSDT [ 0.488021] ACPI: Interpreter enabled [ 0.488026] ACPI: (supports S0 S1 S4 S5) [ 0.488043] ACPI: Using IOAPIC for interrupt routing [ 0.494283] ACPI: No dock devices found. [ 0.494305] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.494365] pci 0000:00:00.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff] [ 0.494422] pci 0000:00:01.0: supports D1 [ 0.494449] pci 0000:00:0d.0: reg 10 32bit mmio: [0xdc800000-0xdc80ffff] [ 0.494456] pci 0000:00:0d.0: reg 14 io port: [0xd800-0xd81f] [ 0.494500] pci 0000:00:0f.0: reg 10 io port: [0xd400-0xd407] [ 0.494506] pci 0000:00:0f.0: reg 14 io port: [0xd000-0xd003] [ 0.494512] pci 0000:00:0f.0: reg 18 io port: [0xb800-0xb807] [ 0.494517] pci 0000:00:0f.0: reg 1c io port: [0xb400-0xb403] [ 0.494523] pci 0000:00:0f.0: reg 20 io port: [0xb000-0xb00f] [ 0.494529] pci 0000:00:0f.0: reg 24 io port: [0xa800-0xa8ff] [ 0.494579] pci 0000:00:0f.1: reg 20 io port: [0xa400-0xa40f] [ 0.494636] pci 0000:00:10.0: reg 20 io port: [0xa000-0xa01f] [ 0.494650] pci 0000:00:10.0: supports D1 D2 [ 0.494652] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.494656] pci 0000:00:10.0: PME# disabled [ 0.494696] pci 0000:00:10.1: reg 20 io port: [0x9800-0x981f] [ 0.494710] pci 0000:00:10.1: supports D1 D2 [ 0.494712] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.494715] pci 0000:00:10.1: PME# disabled [ 0.494753] pci 0000:00:10.2: reg 20 io port: [0x9400-0x941f] [ 0.494767] pci 0000:00:10.2: supports D1 D2 [ 0.494769] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.494773] pci 0000:00:10.2: PME# disabled [ 0.494810] pci 0000:00:10.3: reg 20 io port: [0x9000-0x901f] [ 0.494824] pci 0000:00:10.3: supports D1 D2 [ 0.494826] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.494829] pci 0000:00:10.3: PME# disabled [ 0.494854] pci 0000:00:10.4: reg 10 32bit mmio: [0xdc000000-0xdc0000ff] [ 0.494881] pci 0000:00:10.4: supports D1 D2 [ 0.494883] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.494886] pci 0000:00:10.4: PME# disabled [ 0.494937] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.494942] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices [ 0.494977] pci 0000:00:11.5: reg 10 io port: [0xe000-0xe0ff] [ 0.495006] pci 0000:00:11.5: supports D1 D2 [ 0.495032] pci 0000:00:11.6: reg 10 io port: [0xe500-0xe5ff] [ 0.495085] pci 0000:00:12.0: reg 10 io port: [0x8800-0x88ff] [ 0.495091] pci 0000:00:12.0: reg 14 32bit mmio: [0xdb800000-0xdb8000ff] [ 0.495116] pci 0000:00:12.0: supports D1 D2 [ 0.495118] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.495121] pci 0000:00:12.0: PME# disabled [ 0.495170] pci 0000:01:00.0: reg 10 32bit mmio: [0xde000000-0xdeffffff] [ 0.495177] pci 0000:01:00.0: reg 14 32bit mmio: [0xe0000000-0xefffffff] [ 0.495183] pci 0000:01:00.0: reg 18 32bit mmio: [0xdd000000-0xddffffff] [ 0.495199] pci 0000:01:00.0: reg 30 32bit mmio: [0xdffe0000-0xdfffffff] [ 0.495236] pci 0000:00:01.0: bridge 32bit mmio: [0xdd000000-0xdfefffff] [ 0.495240] pci 0000:00:01.0: bridge 32bit mmio pref: [0xdff00000-0xefffffff] [ 0.495247] bus 00 -> node 0 [ 0.495253] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.495526] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.497736] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12) [ 0.497850] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled. [ 0.497962] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled. [ 0.498081] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled. [ 0.498301] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12) [ 0.498473] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12) [ 0.498680] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12) [ 0.498821] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12) *15, disabled. [ 0.498954] ACPI: WMI: Mapper loaded [ 0.499169] SCSI subsystem initialized [ 0.499227] libata version 3.00 loaded. [ 0.499286] usbcore: registered new interface driver usbfs [ 0.499306] usbcore: registered new interface driver hub [ 0.499341] usbcore: registered new device driver usb [ 0.499492] PCI: Using ACPI for IRQ routing [ 0.499585] Bluetooth: Core ver 2.13 [ 0.499585] NET: Registered protocol family 31 [ 0.499585] Bluetooth: HCI device and connection manager initialized [ 0.499585] Bluetooth: HCI socket layer initialized [ 0.499585] NET: Registered protocol family 8 [ 0.499585] NET: Registered protocol family 20 [ 0.499585] NetLabel: Initializing [ 0.499585] NetLabel: domain hash size = 128 [ 0.499585] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.499585] NetLabel: unlabeled traffic allowed by default [ 0.499585] AppArmor: AppArmor Filesystem Enabled [ 0.499585] pnp: PnP ACPI init [ 0.499585] ACPI: bus type pnp registered [ 0.504579] pnp: PnP ACPI: found 14 devices [ 0.504581] ACPI: ACPI bus type pnp unregistered [ 0.504585] PnPBIOS: Disabled by ACPI PNP [ 0.504596] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.504599] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 0.504602] system 00:00: iomem range 0x100000-0x7fffffff could not be reserved [ 0.504605] system 00:00: iomem range 0xfec00000-0xfec000ff has been reserved [ 0.504608] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.504614] system 00:02: ioport range 0xe400-0xe47f has been reserved [ 0.504616] system 00:02: ioport range 0xe800-0xe81f has been reserved [ 0.504619] system 00:02: iomem range 0xfff80000-0xffffffff could not be reserved [ 0.504622] system 00:02: iomem range 0xffb80000-0xffbfffff has been reserved [ 0.504628] system 00:03: ioport range 0x4d0-0x4d1 has been reserved [ 0.504635] system 00:0d: ioport range 0x290-0x297 has been reserved [ 0.504638] system 00:0d: ioport range 0x370-0x375 has been reserved [ 0.539327] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.539330] pci 0000:00:01.0: IO window: disabled [ 0.539335] pci 0000:00:01.0: MEM window: 0xdd000000-0xdfefffff [ 0.539339] pci 0000:00:01.0: PREFETCH window: 0x000000dff00000-0x000000efffffff [ 0.539354] pci 0000:00:01.0: setting latency timer to 64 [ 0.539359] bus: 00 index 0 io port: [0x00-0xffff] [ 0.539361] bus: 00 index 1 mmio: [0x000000-0xffffffff] [ 0.539363] bus: 01 index 0 mmio: [0x0-0x0] [ 0.539365] bus: 01 index 1 mmio: [0xdd000000-0xdfefffff] [ 0.539367] bus: 01 index 2 mmio: [0xdff00000-0xefffffff] [ 0.539369] bus: 01 index 3 mmio: [0x0-0x0] [ 0.539379] NET: Registered protocol family 2 [ 0.539504] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.540033] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.542115] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.543206] TCP: Hash tables configured (established 131072 bind 65536) [ 0.543210] TCP reno registered [ 0.543384] NET: Registered protocol family 1 [ 0.543553] checking if image is initramfs... it is [ 1.040001] Switched to high resolution mode on CPU 0 [ 1.159600] Freeing initrd memory: 7622k freed [ 1.159659] Simple Boot Flag at 0x3a set to 0x1 [ 1.159759] cpufreq: No nForce2 chipset. [ 1.159943] audit: initializing netlink socket (disabled) [ 1.159973] type=2000 audit(1239212181.156:1): initialized [ 1.167242] highmem bounce pool size: 64 pages [ 1.167250] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.168564] VFS: Disk quotas dquot_6.5.1 [ 1.168622] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.169229] fuse init (API version 7.10) [ 1.169310] msgmni has been set to 1698 [ 1.169517] alg: No test for stdrng (krng) [ 1.169532] io scheduler noop registered [ 1.169534] io scheduler anticipatory registered [ 1.169536] io scheduler deadline registered [ 1.169551] io scheduler cfq registered (default) [ 1.169566] PCI: VIA PCI bridge detected.Disabling DAC. [ 1.169647] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message [ 1.169668] pci 0000:01:00.0: Boot video device [ 1.175457] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.175467] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.175619] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.175622] ACPI: Power Button (FF) [PWRF] [ 1.175673] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.175676] ACPI: Power Button (CM) [PWRB] [ 1.175845] processor ACPI_CPU:00: registered as cooling_device0 [ 1.178978] isapnp: Scanning for PnP cards... [ 1.532194] isapnp: No Plug & Play device found [ 1.533600] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.533685] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.533976] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.534775] brd: module loaded [ 1.535120] loop: module loaded [ 1.535204] Fixed MDIO Bus: probed [ 1.535212] PPP generic driver version 2.4.2 [ 1.535282] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.535313] Driver 'sd' needs updating - please use bus_type methods [ 1.535330] Driver 'sr' needs updating - please use bus_type methods [ 1.535454] sata_via 0000:00:0f.0: version 2.4 [ 1.535484] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 1.535563] sata_via 0000:00:0f.0: routed to hard irq line 0 [ 1.535714] scsi0 : sata_via [ 1.535840] scsi1 : sata_via [ 1.537562] ata1: SATA max UDMA/133 cmd 0xd400 ctl 0xd000 bmdma 0xb000 irq 20 [ 1.537565] ata2: SATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xb008 irq 20 [ 1.740012] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.904174] ata1.00: ATA-7: Maxtor 6B200M0, BANC1980, max UDMA/100 [ 1.904177] ata1.00: 390721968 sectors, multi 0: LBA48 [ 1.920168] ata1.00: configured for UDMA/100 [ 2.124008] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.329394] ata2.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133 [ 2.329396] ata2.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 2.396028] ata2.00: configured for UDMA/133 [ 2.396206] scsi 0:0:0:0: Direct-Access ATA Maxtor 6B200M0 BANC PQ: 0 ANSI: 5 [ 2.396317] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB) [ 2.396339] sd 0:0:0:0: [sda] Write Protect is off [ 2.396342] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.396373] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.396462] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB) [ 2.396480] sd 0:0:0:0: [sda] Write Protect is off [ 2.396482] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.396511] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.396516] sda: sda1 [ 2.419463] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.419523] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.419585] scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 [ 2.419686] sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 2.419703] sd 1:0:0:0: [sdb] Write Protect is off [ 2.419706] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.419734] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.419786] sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 2.419803] sd 1:0:0:0: [sdb] Write Protect is off [ 2.419805] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.419834] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.419838] sdb: sdb1 sdb2 sdb3 [ 2.456635] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.456671] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.457072] pata_via 0000:00:0f.1: version 0.3.3 [ 2.457091] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.457327] scsi2 : pata_via [ 2.457399] scsi3 : pata_via [ 2.458126] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xa400 irq 14 [ 2.458129] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xa408 irq 15 [ 2.628506] ata3.00: ATA-7: Maxtor 6Y120P0, YAR41BW0, max UDMA/133 [ 2.628508] ata3.00: 240121728 sectors, multi 16: LBA [ 2.628638] ata3.01: ATA-7: SAMSUNG SP1203N, TL100-24, max UDMA/100 [ 2.628641] ata3.01: 234493056 sectors, multi 16: LBA48 [ 2.644372] ata3.00: configured for UDMA/133 [ 2.652292] ata3.01: configured for UDMA/100 [ 2.816320] ata4.00: ATAPI: LITE-ON DVD+RW LDW-401S, ES0M, max UDMA/33 [ 2.832205] ata4.00: configured for UDMA/33 [ 2.832721] scsi 2:0:0:0: Direct-Access ATA Maxtor 6Y120P0 YAR4 PQ: 0 ANSI: 5 [ 2.832814] sd 2:0:0:0: [sdc] 240121728 512-byte hardware sectors: (122 GB/114 GiB) [ 2.832834] sd 2:0:0:0: [sdc] Write Protect is off [ 2.832837] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.832869] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.832946] sd 2:0:0:0: [sdc] 240121728 512-byte hardware sectors: (122 GB/114 GiB) [ 2.832963] sd 2:0:0:0: [sdc] Write Protect is off [ 2.832966] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.832995] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.833000] sdc: sdc1 [ 2.846726] sd 2:0:0:0: [sdc] Attached SCSI disk [ 2.846778] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 2.846839] scsi 2:0:1:0: Direct-Access ATA SAMSUNG SP1203N TL10 PQ: 0 ANSI: 5 [ 2.846930] sd 2:0:1:0: [sdd] 234493056 512-byte hardware sectors: (120 GB/111 GiB) [ 2.846947] sd 2:0:1:0: [sdd] Write Protect is off [ 2.846950] sd 2:0:1:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.846978] sd 2:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.847030] sd 2:0:1:0: [sdd] 234493056 512-byte hardware sectors: (120 GB/111 GiB) [ 2.847047] sd 2:0:1:0: [sdd] Write Protect is off [ 2.847050] sd 2:0:1:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.847078] sd 2:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.847082] sdd: sdd1 sdd2 [ 2.851915] sd 2:0:1:0: [sdd] Attached SCSI disk [ 2.851950] sd 2:0:1:0: Attached scsi generic sg3 type 0 [ 2.852737] scsi 3:0:0:0: CD-ROM LITE-ON DVD+RW LDW-401S ES0M PQ: 0 ANSI: 5 [ 2.856498] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 2.856503] Uniform CD-ROM driver Revision: 3.20 [ 2.856595] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 2.856639] sr 3:0:0:0: Attached scsi generic sg4 type 5 [ 2.856804] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.856837] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 2.856876] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 2.856951] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 2.857035] ehci_hcd 0000:00:10.4: irq 21, io mem 0xdc000000 [ 2.868008] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 [ 2.868106] usb usb1: configuration #1 chosen from 1 choice [ 2.868137] hub 1-0:1.0: USB hub found [ 2.868153] hub 1-0:1.0: 8 ports detected [ 2.868260] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.868274] uhci_hcd: USB Universal Host Controller Interface driver [ 2.868303] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 2.868311] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 2.868365] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 2.868384] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000a000 [ 2.868479] usb usb2: configuration #1 chosen from 1 choice [ 2.868503] hub 2-0:1.0: USB hub found [ 2.868516] hub 2-0:1.0: 2 ports detected [ 2.868600] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 2.868606] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 2.868662] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 2.868680] uhci_hcd 0000:00:10.1: irq 21, io base 0x00009800 [ 2.868772] usb usb3: configuration #1 chosen from 1 choice [ 2.868795] hub 3-0:1.0: USB hub found [ 2.868806] hub 3-0:1.0: 2 ports detected [ 2.868880] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.868886] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 2.868942] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 2.868960] uhci_hcd 0000:00:10.2: irq 21, io base 0x00009400 [ 2.869044] usb usb4: configuration #1 chosen from 1 choice [ 2.869067] hub 4-0:1.0: USB hub found [ 2.869078] hub 4-0:1.0: 2 ports detected [ 2.869172] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.869178] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 2.869221] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 [ 2.869239] uhci_hcd 0000:00:10.3: irq 21, io base 0x00009000 [ 2.869326] usb usb5: configuration #1 chosen from 1 choice [ 2.869350] hub 5-0:1.0: USB hub found [ 2.869361] hub 5-0:1.0: 2 ports detected [ 2.869481] usbcore: registered new interface driver libusual [ 2.869519] usbcore: registered new interface driver usbserial [ 2.869531] USB Serial support registered for generic [ 2.869545] usbcore: registered new interface driver usbserial_generic [ 2.869547] usbserial: USB Serial Driver core [ 2.869601] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 2.869604] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 2.870116] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.870232] mice: PS/2 mouse device common for all mice [ 2.870365] rtc_cmos 00:05: RTC can wake from S4 [ 2.870412] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 2.870458] rtc0: alarms up to one month, 242 bytes nvram [ 2.870526] device-mapper: uevent: version 1.0.3 [ 2.870684] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 2.870751] device-mapper: multipath: version 1.0.5 loaded [ 2.870755] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.870859] EISA: Probing bus 0 at eisa.0 [ 2.870891] Cannot allocate resource for EISA slot 8 [ 2.870893] EISA: Detected 0 cards. [ 2.870935] cpuidle: using governor ladder [ 2.870937] cpuidle: using governor menu [ 2.871471] TCP cubic registered [ 2.871567] NET: Registered protocol family 10 [ 2.872025] lo: Disabled Privacy Extensions [ 2.872346] NET: Registered protocol family 17 [ 2.872365] Bluetooth: L2CAP ver 2.11 [ 2.872367] Bluetooth: L2CAP socket layer initialized [ 2.872371] Bluetooth: SCO (Voice Link) ver 0.6 [ 2.872372] Bluetooth: SCO socket layer initialized [ 2.872406] Bluetooth: RFCOMM socket layer initialized [ 2.872416] Bluetooth: RFCOMM TTY layer initialized [ 2.872418] Bluetooth: RFCOMM ver 1.10 [ 2.872441] powernow-k8: Processor cpuid 6a0 not supported [ 2.872471] Using IPI No-Shortcut mode [ 2.872553] registered taskstats version 1 [ 2.872688] Magic number: 5:970:642 [ 2.872844] rtc_cmos 00:05: setting system clock to 2009-04-08 17:36:23 UTC (1239212183) [ 2.872848] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.872850] EDD information not available. [ 2.873693] Freeing unused kernel memory: 532k freed [ 2.873812] Write protecting the kernel text: 4128k [ 2.873850] Write protecting the kernel read-only data: 1532k [ 2.907712] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 3.116495] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled [ 3.132180] SGI XFS Quota Management subsystem [ 3.180030] usb 1-4: new high speed USB device using ehci_hcd and address 2 [ 3.309296] Floppy drive(s): fd0 is 1.44M [ 3.313374] usb 1-4: configuration #1 chosen from 1 choice [ 3.313654] hub 1-4:1.0: USB hub found [ 3.313996] hub 1-4:1.0: 4 ports detected [ 3.327948] FDC 0 is a post-1991 82077 [ 3.540529] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 3.540608] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 3.541370] eth0: VIA Rhine II at 0xdb800000, 00:11:2f:09:fe:fc, IRQ 23. [ 3.542079] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1. [ 3.585127] usb 1-4.2: new high speed USB device using ehci_hcd and address 3 [ 3.678080] usb 1-4.2: configuration #1 chosen from 1 choice [ 3.686347] Initializing USB Mass Storage driver... [ 3.688828] scsi4 : SCSI emulation for USB Mass Storage devices [ 3.689583] usbcore: registered new interface driver usb-storage [ 3.689590] USB Mass Storage support registered. [ 3.689713] usb-storage: device found at 3 [ 3.689715] usb-storage: waiting for device to settle before scanning [ 3.756616] usb 1-4.3: new full speed USB device using ehci_hcd and address 4 [ 3.852807] usb 1-4.3: configuration #1 chosen from 1 choice [ 3.860918] usbcore: registered new interface driver hiddev [ 3.860985] usbcore: registered new interface driver usbhid [ 3.860988] usbhid: v2.6:USB HID core driver [ 3.932322] usb 1-4.4: new low speed USB device using ehci_hcd and address 5 [ 4.030261] usb 1-4.4: configuration #1 chosen from 1 choice [ 4.033349] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:10.4/usb1/1-4/1-4.4/1-4.4:1.0/input/input4 [ 4.038166] generic-usb 0003:046D:C03D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.4-4.4/input0 [ 8.688253] usb-storage: device scan complete [ 8.743609] scsi 4:0:0:0: Direct-Access ST310003 33AS PQ: 0 ANSI: 2 CCS [ 8.745581] sd 4:0:0:0: [sde] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [ 8.746408] sd 4:0:0:0: [sde] Write Protect is off [ 8.746413] sd 4:0:0:0: [sde] Mode Sense: 34 00 00 00 [ 8.746416] sd 4:0:0:0: [sde] Assuming drive cache: write through [ 8.747391] sd 4:0:0:0: [sde] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [ 8.748193] sd 4:0:0:0: [sde] Write Protect is off [ 8.748196] sd 4:0:0:0: [sde] Mode Sense: 34 00 00 00 [ 8.748199] sd 4:0:0:0: [sde] Assuming drive cache: write through [ 8.748208] sde: sde1 [ 8.769776] sd 4:0:0:0: [sde] Attached SCSI disk [ 8.769884] sd 4:0:0:0: Attached scsi generic sg5 type 0 [ 8.944453] XFS mounting filesystem sdb2 [ 9.110066] Ending clean XFS mount for filesystem: sdb2 [ 18.967712] udev: starting version 140 [ 19.398431] Linux agpgart interface v0.103 [ 19.438258] udev: renamed network interface eth0 to eth1 [ 19.568582] input: Wacom Bamboo as /devices/pci0000:00/0000:00:10.4/usb1/1-4/1-4.3/1-4.3:1.0/input/input5 [ 19.599991] usbcore: registered new interface driver wacom [ 19.600076] wacom: v1.49:USB Wacom Graphire and Wacom Intuos tablet driver [ 19.807896] parport_pc 00:09: reported by Plug and Play ACPI [ 19.807966] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 19.981989] agpgart: Detected VIA KT400/KT400A/KT600 chipset [ 19.994123] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xf0000000 [ 20.013034] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 20.412777] ppdev: user-space parallel port driver [ 20.775277] nvidia: module license 'NVIDIA' taints kernel. [ 21.055110] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 21.057363] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009 [ 21.142950] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully [ 21.147536] flexcop-pci: will use the HW PID filter. [ 21.147544] flexcop-pci: card revision 2 [ 21.147557] b2c2_flexcop_pci 0000:00:0d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 21.160145] DVB: registering new adapter (FlexCop Digital TV device) [ 21.162055] b2c2-flexcop: MAC address = 00:d0:d7:0d:d0:d0 [ 21.162428] b2c2-flexcop: i2c master_xfer failed [ 21.162927] b2c2-flexcop: i2c master_xfer failed [ 21.162976] CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121) [ 21.163026] CX24123: wrong demod revision: 87 [ 21.388021] b2c2-flexcop: i2c master_xfer failed [ 21.404265] ip_tables: (C) 2000-2006 Netfilter Core Team [ 21.592292] b2c2-flexcop: i2c master_xfer failed [ 21.628025] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 21.628453] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 21.628456] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or [ 21.628458] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 21.758757] b2c2-flexcop: found 'Zarlink MT352 DVB-T' . [ 21.758766] DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)... [ 21.758892] b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'PCI' bus controlled by a 'FlexCopIIb' complete [ 21.761353] VIA 82xx Modem 0000:00:11.6: enabling device (0000 -> 0001) [ 21.761372] VIA 82xx Modem 0000:00:11.6: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 22.516017] VIA 82xx Modem 0000:00:11.6: setting latency timer to 64 [ 23.020239] VIA 82xx Modem 0000:00:11.6: PCI INT C disabled [ 23.020258] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13 [ 23.020973] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 23.021125] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 23.534337] codec_read: codec 0 is not valid [0xfe0000] [ 23.540529] codec_read: codec 0 is not valid [0xfe0000] [ 23.546733] codec_read: codec 0 is not valid [0xfe0000] [ 23.552946] codec_read: codec 0 is not valid [0xfe0000] [ 23.935041] lp0: using parport0 (interrupt-driven). [ 23.949464] Non-volatile memory driver v1.2 [ 24.113221] it87: Found IT8712F chip at 0x290, revision 5 [ 24.404430] Adding 1044216k swap on /dev/sdb3. Priority:-1 extents:1 across:1044216k [ 36.698036] type=1505 audit(1239212217.323:2): operation="profile_load" name="/bin/ping" name2="default" pid=3103 [ 36.747300] type=1505 audit(1239212217.371:3): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=3109 [ 36.843395] type=1505 audit(1239212217.467:4): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=3114 [ 36.843734] type=1505 audit(1239212217.467:5): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=3114 [ 36.843840] type=1505 audit(1239212217.467:6): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=3114 [ 36.843934] type=1505 audit(1239212217.467:7): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=3114 [ 36.861800] type=1505 audit(1239212217.487:8): operation="profile_load" name="/sbin/klogd" name2="default" pid=3117 [ 36.899679] type=1505 audit(1239212217.523:9): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=3120 [ 36.941505] type=1505 audit(1239212217.567:10): operation="profile_load" name="/sbin/syslogd" name2="default" pid=3123 [ 36.984284] type=1505 audit(1239212217.611:11): operation="profile_load" name="/usr/bin/freshclam" name2="default" pid=3128 [ 42.624260] kjournald starting. Commit interval 5 seconds [ 42.624596] EXT3 FS on sdc1, internal journal [ 42.624603] EXT3-fs: mounted filesystem with ordered data mode. [ 66.438115] __ratelimit: 48 callbacks suppressed [ 66.438120] type=1503 audit(1239212247.063:28): operation="inode_permission" requested_mask="::r" denied_mask="::r" fsuid=141 name="/usr/local/stow/python-easy-install/lib/python2.6/site-packages/easy-install.pth" pid=3892 profile="/usr/local/stow/restricted-buildslave/sbin/restricted-buildslave-runner" [ 66.438174] type=1503 audit(1239212247.063:29): operation="inode_permission" requested_mask="::r" denied_mask="::r" fsuid=141 name="/usr/local/stow/python-easy-install/lib/python2.6/site-packages/setuptools.pth" pid=3892 profile="/usr/local/stow/restricted-buildslave/sbin/restricted-buildslave-runner" [ 69.452040] type=1503 audit(1239212250.075:30): operation="inode_permission" requested_mask="::r" denied_mask="::r" fsuid=141 name="/usr/local/stow/python-easy-install/lib/python2.6/site-packages/easy-install.pth" pid=3944 profile="/usr/local/stow/restricted-buildslave/sbin/restricted-buildslave-runner" [ 69.452116] type=1503 audit(1239212250.079:31): operation="inode_permission" requested_mask="::r" denied_mask="::r" fsuid=141 name="/usr/local/stow/python-easy-install/lib/python2.6/site-packages/setuptools.pth" pid=3944 profile="/usr/local/stow/restricted-buildslave/sbin/restricted-buildslave-runner" [ 70.870465] type=1503 audit(1239212251.495:32): operation="inode_permission" requested_mask="::r" denied_mask="::r" fsuid=141 name="/usr/local/stow/python-easy-install/lib/python2.6/site-packages/easy-install.pth" pid=3961 profile="/usr/local/stow/restricted-buildslave/sbin/restricted-buildslave-runner" [ 70.870522] type=1503 audit(1239212251.495:33): operation="inode_permission" requested_mask="::r" denied_mask="::r" fsuid=141 name="/usr/local/stow/python-easy-install/lib/python2.6/site-packages/setuptools.pth" pid=3961 profile="/usr/local/stow/restricted-buildslave/sbin/restricted-buildslave-runner" [ 71.473831] type=1503 audit(1239212252.099:34): operation="inode_permission" requested_mask="::r" denied_mask="::r" fsuid=141 name="/etc/hosts" pid=3966 profile="/usr/local/stow/restricted-buildslave/sbin/restricted-buildslave-runner" [ 74.101494] type=1503 audit(1239212254.727:35): operation="inode_permission" requested_mask="::r" denied_mask="::r" fsuid=141 name="/etc/hosts" pid=3966 profile="/usr/local/stow/restricted-buildslave/sbin/restricted-buildslave-runner" [ 81.653219] type=1503 audit(1239212262.279:36): operation="inode_permission" requested_mask="::r" denied_mask="::r" fsuid=141 name="/etc/hosts" pid=3966 profile="/usr/local/stow/restricted-buildslave/sbin/restricted-buildslave-runner" [ 103.652462] warning: `vdr-kbd' uses 32-bit capabilities (legacy support in use) [ 103.845203] type=1503 audit(1239212284.471:37): operation="inode_permission" requested_mask="::r" denied_mask="::r" fsuid=141 name="/etc/hosts" pid=3966 profile="/usr/local/stow/restricted-buildslave/sbin/restricted-buildslave-runner" [ 109.458378] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 109.458384] Bluetooth: BNEP filters: protocol multicast [ 109.994100] Bridge firewalling registered [ 116.376441] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 117.413257] agpgart-via 0000:00:00.0: AGP 3.5 bridge [ 117.413277] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode [ 117.413334] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode [ 118.508903] lirc_dev: IR Remote Control driver registered, major 61 [ 118.826667] lirc_serial: port 03f8 already in use [ 118.826674] lirc_serial: use 'setserial /dev/ttySX uart none' [ 118.826676] lirc_serial: or compile the serial port driver as module and [ 118.826678] lirc_serial: make sure this module is loaded first