[ 0.000000] BIOS EBDA/lowmem at: 0009ec00/0009ec00 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28-8-server (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu1) ) #28-Ubuntu SMP Thu Mar 5 22:39:43 UTC 2009 (Ubuntu 2.6.28-8.28-server) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff80000 (usable) [ 0.000000] BIOS-e820: 00000000cff80000 - 00000000cff8e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff8e000 - 00000000cffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around. [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x1000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009ec00 (usable) [ 0.000000] modified: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cff80000 (usable) [ 0.000000] modified: 00000000cff80000 - 00000000cff8e000 (ACPI data) [ 0.000000] modified: 00000000cff8e000 - 00000000cffe0000 (ACPI NVS) [ 0.000000] modified: 00000000cffe0000 - 00000000d0000000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-16000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] RAMDISK: 377b3000 - 37fefedc [ 0.000000] Allocated new RAMDISK: 0089f000 - 010dbedc [ 0.000000] Move RAMDISK from 00000000377b3000 - 0000000037fefedb to 0089f000 - 010dbedb [ 0.000000] ACPI: RSDP 000FBB80, 0024 (r2 ACPIAM) [ 0.000000] ACPI: XSDT CFF80100, 0054 (r1 A_M_I_ OEMXSDT 12000710 MSFT 97) [ 0.000000] ACPI: FACP CFF80290, 00F4 (r3 A_M_I_ OEMFACP 12000710 MSFT 97) [ 0.000000] ACPI: DSDT CFF805C0, 90CD (r1 A0812 A0812001 1 INTL 20060113) [ 0.000000] ACPI: FACS CFF8E000, 0040 [ 0.000000] ACPI: APIC CFF80390, 006C (r1 A_M_I_ OEMAPIC 12000710 MSFT 97) [ 0.000000] ACPI: MCFG CFF80400, 003C (r1 A_M_I_ OEMMCFG 12000710 MSFT 97) [ 0.000000] ACPI: OEMB CFF8E040, 0081 (r1 A_M_I_ AMI_OEM 12000710 MSFT 97) [ 0.000000] ACPI: HPET CFF89690, 0038 (r1 A_M_I_ OEMHPET 12000710 MSFT 97) [ 0.000000] ACPI: OSFR CFF896D0, 00B0 (r1 A_M_I_ OEMOSFR 12000710 MSFT 97) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 3976MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 00000000 - 377fe000 [ 0.000000] bootmap 00013000 - 00019f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 0000895e2c] TEXT DATA BSS ==> [0000100000 - 0000895e2c] [ 0.000000] #4 [0000896000 - 000089f000] INIT_PG_TABLE ==> [0000896000 - 000089f000] [ 0.000000] #5 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] [ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] [ 0.000000] #7 [000089f000 - 00010dbedc] NEW RAMDISK ==> [000089f000 - 00010dbedc] [ 0.000000] #8 [0000013000 - 000001a000] BOOTMAP ==> [0000013000 - 000001a000] [ 0.000000] found SMP MP-table at [c00ff780] 000ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000cff80 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1048334 [ 0.000000] free_area_init_node: node 0, pgdat c06d3280, node_mem_map c10dc200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3950 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 7953 pages used for memmap [ 0.000000] HighMem zone: 813169 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ee00000) [ 0.000000] PERCPU: Allocating 49152 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1038605 [ 0.000000] Kernel command line: root=/dev/md0 ro quiet splash [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2400.012 MHz processor. [ 0.010000] Console: colour VGA+ 80x25 [ 0.010000] console [tty0] enabled [ 0.010000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.010000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.010000] allocated 24903360 bytes of page_cgroup [ 0.010000] please try cgroup_disable=memory option if you don't want [ 0.010000] Scanning for low memory corruption every 60 seconds [ 0.010000] Memory: 4111824k/4980736k available (4119k kernel code, 80552k reserved, 2240k data, 544k init, 3284488k highmem) [ 0.010000] virtual kernel memory layout: [ 0.010000] fixmap : 0xffc78000 - 0xfffff000 (3612 kB) [ 0.010000] pkmap : 0xff800000 - 0xffa00000 (2048 kB) [ 0.010000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.010000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.010000] .init : 0xc073d000 - 0xc07c5000 ( 544 kB) [ 0.010000] .data : 0xc0505fa3 - 0xc0735fc0 (2240 kB) [ 0.010000] .text : 0xc0100000 - 0xc0505fa3 (4119 kB) [ 0.010000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.010000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.010000] hpet clockevent registered [ 0.010000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.02 BogoMIPS (lpj=24000120) [ 0.010000] Security Framework initialized [ 0.010000] SELinux: Disabled at boot. [ 0.010000] AppArmor: AppArmor initialized [ 0.010000] Mount-cache hash table entries: 512 [ 0.010000] Initializing cgroup subsys ns [ 0.010000] Initializing cgroup subsys cpuacct [ 0.010000] Initializing cgroup subsys memory [ 0.010000] Initializing cgroup subsys freezer [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 4096K [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 0 [ 0.010000] using mwait in idle threads. [ 0.010000] Checking 'hlt' instruction... OK. [ 0.042137] ACPI: Core revision 20080926 [ 0.045512] ACPI: Checking initramfs for custom DSDT [ 0.340376] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.460028] CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.470000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] Calibrating delay using timer specific routine.. 4800.17 BogoMIPS (lpj=24000874) [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 4096K [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 1 [ 0.620552] CPU1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.620562] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.630101] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.010000] Initializing CPU#2 [ 0.010000] Calibrating delay using timer specific routine.. 4800.18 BogoMIPS (lpj=24000942) [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 4096K [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 2 [ 0.790567] CPU2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.790576] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.800082] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.010000] Initializing CPU#3 [ 0.010000] Calibrating delay using timer specific routine.. 4800.19 BogoMIPS (lpj=24000989) [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 4096K [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 3 [ 0.960613] CPU3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.960624] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.970022] Brought up 4 CPUs [ 0.970025] Total of 4 processors activated (19200.58 BogoMIPS). [ 0.970078] CPU0 attaching sched-domain: [ 0.970080] domain 0: span 0-1 level MC [ 0.970082] groups: 0 1 [ 0.970086] domain 1: span 0-3 level CPU [ 0.970088] groups: 0-1 2-3 [ 0.970092] CPU1 attaching sched-domain: [ 0.970094] domain 0: span 0-1 level MC [ 0.970096] groups: 1 0 [ 0.970098] domain 1: span 0-3 level CPU [ 0.970100] groups: 0-1 2-3 [ 0.970104] CPU2 attaching sched-domain: [ 0.970105] domain 0: span 2-3 level MC [ 0.970107] groups: 2 3 [ 0.970110] domain 1: span 0-3 level CPU [ 0.970111] groups: 2-3 0-1 [ 0.970115] CPU3 attaching sched-domain: [ 0.970117] domain 0: span 2-3 level MC [ 0.970119] groups: 3 2 [ 0.970121] domain 1: span 0-3 level CPU [ 0.970123] groups: 2-3 0-1 [ 0.970223] net_namespace: 776 bytes [ 0.970223] Booting paravirtualized kernel on bare hardware [ 0.970246] Time: 6:40:34 Date: 03/11/09 [ 0.970246] regulator: core version 0.5 [ 0.970246] NET: Registered protocol family 16 [ 0.970246] EISA bus registered [ 0.970246] ACPI: bus type pci registered [ 0.970246] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.970246] PCI: Not using MMCONFIG. [ 0.970246] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 [ 0.970246] PCI: Using configuration type 1 for base access [ 0.970836] ACPI: EC: Look up EC in DSDT [ 0.989229] ACPI: Interpreter enabled [ 0.989239] ACPI: (supports S0 S1 S3 S4 S5) [ 0.989256] ACPI: Using IOAPIC for interrupt routing [ 0.989305] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.991958] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.991960] PCI: Using MMCONFIG for extended config space [ 1.000535] ACPI: No dock devices found. [ 1.000535] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 1.000535] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.000535] pci 0000:00:01.0: PME# disabled [ 1.000535] pci 0000:00:1a.0: reg 20 io port: [0xb800-0xb81f] [ 1.000535] pci 0000:00:1a.1: reg 20 io port: [0xb880-0xb89f] [ 1.000535] pci 0000:00:1a.2: reg 20 io port: [0xbc00-0xbc1f] [ 1.000535] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf5fffc00-0xf5ffffff] [ 1.000535] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 1.000535] pci 0000:00:1a.7: PME# disabled [ 1.000535] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf5ff8000-0xf5ffbfff] [ 1.000535] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.000535] pci 0000:00:1b.0: PME# disabled [ 1.000535] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.000535] pci 0000:00:1c.0: PME# disabled [ 1.000535] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 1.000535] pci 0000:00:1c.4: PME# disabled [ 1.000544] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 1.000547] pci 0000:00:1c.5: PME# disabled [ 1.000595] pci 0000:00:1d.0: reg 20 io port: [0xb080-0xb09f] [ 1.000650] pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f] [ 1.000707] pci 0000:00:1d.2: reg 20 io port: [0xb480-0xb49f] [ 1.000765] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf5fff800-0xf5fffbff] [ 1.000799] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.000803] pci 0000:00:1d.7: PME# disabled [ 1.000905] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 1.000908] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 1.000954] pci 0000:00:1f.2: reg 10 io port: [0xac00-0xac07] [ 1.000959] pci 0000:00:1f.2: reg 14 io port: [0xa880-0xa883] [ 1.000964] pci 0000:00:1f.2: reg 18 io port: [0xa800-0xa807] [ 1.000969] pci 0000:00:1f.2: reg 1c io port: [0xa480-0xa483] [ 1.000974] pci 0000:00:1f.2: reg 20 io port: [0xa400-0xa41f] [ 1.000980] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf5ffe800-0xf5ffefff] [ 1.000992] pci 0000:00:1f.2: PME# supported from D3hot [ 1.000995] pci 0000:00:1f.2: PME# disabled [ 1.001020] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf5fff400-0xf5fff4ff] [ 1.001032] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 1.001072] pci 0000:01:00.0: reg 10 32bit mmio: [0xf8000000-0xf8ffffff] [ 1.001080] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] [ 1.001088] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf6000000-0xf7ffffff] [ 1.001093] pci 0000:01:00.0: reg 24 io port: [0xcc00-0xcc7f] [ 1.001098] pci 0000:01:00.0: reg 30 32bit mmio: [0xf9de0000-0xf9dfffff] [ 1.001141] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff] [ 1.001143] pci 0000:00:01.0: bridge 32bit mmio: [0xf6000000-0xf9dfffff] [ 1.001147] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 1.001186] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf4f00000-0xf4ffffff] [ 1.001271] pci 0000:03:00.0: reg 24 32bit mmio: [0xf9ffe000-0xf9ffffff] [ 1.001280] pci 0000:03:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] [ 1.001292] pci 0000:03:00.0: PME# supported from D3hot [ 1.001297] pci 0000:03:00.0: PME# disabled [ 1.001345] pci 0000:03:00.1: reg 10 io port: [0xec00-0xec07] [ 1.001354] pci 0000:03:00.1: reg 14 io port: [0xe880-0xe883] [ 1.001362] pci 0000:03:00.1: reg 18 io port: [0xe800-0xe807] [ 1.001371] pci 0000:03:00.1: reg 1c io port: [0xe480-0xe483] [ 1.001379] pci 0000:03:00.1: reg 20 io port: [0xe400-0xe40f] [ 1.001450] pci 0000:00:1c.4: bridge io port: [0xe000-0xefff] [ 1.001454] pci 0000:00:1c.4: bridge 32bit mmio: [0xf9f00000-0xf9ffffff] [ 1.001511] pci 0000:02:00.0: reg 10 64bit mmio: [0xf9efc000-0xf9efffff] [ 1.001519] pci 0000:02:00.0: reg 18 io port: [0xd800-0xd8ff] [ 1.001544] pci 0000:02:00.0: reg 30 32bit mmio: [0xf9ec0000-0xf9edffff] [ 1.001554] pci 0000:02:00.0: supports D1 D2 [ 1.001556] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.001561] pci 0000:02:00.0: PME# disabled [ 1.001598] pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff] [ 1.001602] pci 0000:00:1c.5: bridge 32bit mmio: [0xf9e00000-0xf9efffff] [ 1.001643] pci 0000:05:02.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 1.001705] pci 0000:05:02.1: reg 10 32bit mmio: [0xfb000000-0xfbffffff] [ 1.001766] pci 0000:05:02.2: reg 10 32bit mmio: [0xfc000000-0xfcffffff] [ 1.001828] pci 0000:05:02.4: reg 10 32bit mmio: [0xfd000000-0xfdffffff] [ 1.001892] pci 0000:05:03.0: reg 10 32bit mmio: [0xfebff000-0xfebfffff] [ 1.001927] pci 0000:05:03.0: supports D1 D2 [ 1.001928] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot [ 1.001932] pci 0000:05:03.0: PME# disabled [ 1.001970] pci 0000:00:1e.0: transparent bridge [ 1.001975] pci 0000:00:1e.0: bridge 32bit mmio: [0xfa000000-0xfebfffff] [ 1.001997] bus 00 -> node 0 [ 1.002002] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.002219] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 1.002317] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 1.002480] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 1.002582] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 1.002683] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 1.020850] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 1.020850] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 1.020850] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 1.020850] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 1.020850] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 1.020850] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 1.020903] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 1.021021] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 1.021080] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 85, should be 7C [20080926] [ 1.021080] ACPI: WMI: Mapper loaded [ 1.021080] SCSI subsystem initialized [ 1.021080] libata version 3.00 loaded. [ 1.021080] usbcore: registered new interface driver usbfs [ 1.021080] usbcore: registered new interface driver hub [ 1.021080] usbcore: registered new device driver usb [ 1.021080] PCI: Using ACPI for IRQ routing [ 1.040008] Bluetooth: Core ver 2.13 [ 1.040036] NET: Registered protocol family 31 [ 1.040036] Bluetooth: HCI device and connection manager initialized [ 1.040036] Bluetooth: HCI socket layer initialized [ 1.040036] NET: Registered protocol family 8 [ 1.040036] NET: Registered protocol family 20 [ 1.040038] NetLabel: Initializing [ 1.040038] NetLabel: domain hash size = 128 [ 1.040038] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.040038] NetLabel: unlabeled traffic allowed by default [ 1.040050] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 1.040050] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 1.050062] AppArmor: AppArmor Filesystem Enabled [ 1.060007] Switched to high resolution mode on CPU 0 [ 1.060602] Switched to high resolution mode on CPU 1 [ 1.061026] Switched to high resolution mode on CPU 2 [ 1.061051] Switched to high resolution mode on CPU 3 [ 1.070034] pnp: PnP ACPI init [ 1.070044] ACPI: bus type pnp registered [ 1.074252] pnp: PnP ACPI: found 15 devices [ 1.074254] ACPI: ACPI bus type pnp unregistered [ 1.074257] PnPBIOS: Disabled by ACPI PNP [ 1.074265] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 1.074272] system 00:07: ioport range 0x290-0x297 has been reserved [ 1.074277] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 1.074279] system 00:08: ioport range 0x800-0x87f has been reserved [ 1.074281] system 00:08: ioport range 0x480-0x4bf has been reserved [ 1.074284] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 1.074286] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved [ 1.074288] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved [ 1.074290] system 00:08: iomem range 0xffa00000-0xffafffff has been reserved [ 1.074293] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved [ 1.074295] system 00:08: iomem range 0xffe00000-0xffefffff has been reserved [ 1.074297] system 00:08: iomem range 0xfff00000-0xfffffffe has been reserved [ 1.074303] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved [ 1.074305] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved [ 1.074310] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved [ 1.074314] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 1.074316] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved [ 1.074319] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 1.074321] system 00:0e: iomem range 0x100000-0xcfffffff could not be reserved [ 1.109793] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 1.109795] pci 0000:00:01.0: IO window: 0xc000-0xcfff [ 1.109799] pci 0000:00:01.0: MEM window: 0xf6000000-0xf9dfffff [ 1.109802] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 1.109806] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04 [ 1.109807] pci 0000:00:1c.0: IO window: disabled [ 1.109811] pci 0000:00:1c.0: MEM window: disabled [ 1.109815] pci 0000:00:1c.0: PREFETCH window: 0x000000f4f00000-0x000000f4ffffff [ 1.109821] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 [ 1.109824] pci 0000:00:1c.4: IO window: 0xe000-0xefff [ 1.109828] pci 0000:00:1c.4: MEM window: 0xf9f00000-0xf9ffffff [ 1.109832] pci 0000:00:1c.4: PREFETCH window: 0x000000f0000000-0x000000f00fffff [ 1.109837] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02 [ 1.109840] pci 0000:00:1c.5: IO window: 0xd000-0xdfff [ 1.109844] pci 0000:00:1c.5: MEM window: 0xf9e00000-0xf9efffff [ 1.109847] pci 0000:00:1c.5: PREFETCH window: disabled [ 1.109852] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 1.109854] pci 0000:00:1e.0: IO window: disabled [ 1.109858] pci 0000:00:1e.0: MEM window: 0xfa000000-0xfebfffff [ 1.109862] pci 0000:00:1e.0: PREFETCH window: disabled [ 1.109872] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.109876] pci 0000:00:01.0: setting latency timer to 64 [ 1.109882] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.109886] pci 0000:00:1c.0: setting latency timer to 64 [ 1.109891] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.109895] pci 0000:00:1c.4: setting latency timer to 64 [ 1.109900] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 1.109904] pci 0000:00:1c.5: setting latency timer to 64 [ 1.109909] pci 0000:00:1e.0: setting latency timer to 64 [ 1.109913] bus: 00 index 0 io port: [0x00-0xffff] [ 1.109915] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] [ 1.109917] bus: 01 index 0 io port: [0xc000-0xcfff] [ 1.109918] bus: 01 index 1 mmio: [0xf6000000-0xf9dfffff] [ 1.109920] bus: 01 index 2 mmio: [0xd0000000-0xdfffffff] [ 1.109922] bus: 01 index 3 mmio: [0x0-0x0] [ 1.109923] bus: 04 index 0 mmio: [0x0-0x0] [ 1.109925] bus: 04 index 1 mmio: [0x0-0x0] [ 1.109927] bus: 04 index 2 mmio: [0xf4f00000-0xf4ffffff] [ 1.109928] bus: 04 index 3 mmio: [0x0-0x0] [ 1.109930] bus: 03 index 0 io port: [0xe000-0xefff] [ 1.109932] bus: 03 index 1 mmio: [0xf9f00000-0xf9ffffff] [ 1.109933] bus: 03 index 2 mmio: [0xf0000000-0xf00fffff] [ 1.109935] bus: 03 index 3 mmio: [0x0-0x0] [ 1.109937] bus: 02 index 0 io port: [0xd000-0xdfff] [ 1.109938] bus: 02 index 1 mmio: [0xf9e00000-0xf9efffff] [ 1.109940] bus: 02 index 2 mmio: [0x0-0x0] [ 1.109942] bus: 02 index 3 mmio: [0x0-0x0] [ 1.109943] bus: 05 index 0 mmio: [0x0-0x0] [ 1.109945] bus: 05 index 1 mmio: [0xfa000000-0xfebfffff] [ 1.109946] bus: 05 index 2 mmio: [0x0-0x0] [ 1.109948] bus: 05 index 3 io port: [0x00-0xffff] [ 1.109950] bus: 05 index 4 mmio: [0x000000-0xffffffffffffffff] [ 1.109957] NET: Registered protocol family 2 [ 1.140072] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.140290] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.140557] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 1.140689] TCP: Hash tables configured (established 131072 bind 65536) [ 1.140690] TCP reno registered [ 1.150095] NET: Registered protocol family 1 [ 1.150208] checking if image is initramfs... it is [ 1.738114] Freeing initrd memory: 8435k freed [ 1.739226] cpufreq: No nForce2 chipset. [ 1.739535] audit: initializing netlink socket (disabled) [ 1.739549] type=2000 audit(1236753633.732:1): initialized [ 1.746681] highmem bounce pool size: 64 pages [ 1.746685] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.748475] VFS: Disk quotas dquot_6.5.1 [ 1.748560] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.749341] fuse init (API version 7.10) [ 1.749512] msgmni has been set to 1634 [ 1.749773] alg: No test for stdrng (krng) [ 1.749793] io scheduler noop registered [ 1.749796] io scheduler anticipatory registered [ 1.749798] io scheduler deadline registered (default) [ 1.749814] io scheduler cfq registered [ 1.749971] pci 0000:01:00.0: Boot video device [ 1.753008] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 1.753037] pcieport-driver 0000:00:01.0: found MSI capability [ 1.753056] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X [ 1.753064] pci_express 0000:00:01.0:pcie00: allocate port service [ 1.753093] pci_express 0000:00:01.0:pcie03: allocate port service [ 1.753150] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1.753179] pcieport-driver 0000:00:1c.0: found MSI capability [ 1.753199] pcieport-driver 0000:00:1c.0: irq 2302 for MSI/MSI-X [ 1.753209] pci_express 0000:00:1c.0:pcie00: allocate port service [ 1.753238] pci_express 0000:00:1c.0:pcie02: allocate port service [ 1.753265] pci_express 0000:00:1c.0:pcie03: allocate port service [ 1.753330] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 1.753358] pcieport-driver 0000:00:1c.4: found MSI capability [ 1.753378] pcieport-driver 0000:00:1c.4: irq 2301 for MSI/MSI-X [ 1.753388] pci_express 0000:00:1c.4:pcie00: allocate port service [ 1.753417] pci_express 0000:00:1c.4:pcie02: allocate port service [ 1.753446] pci_express 0000:00:1c.4:pcie03: allocate port service [ 1.753510] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 1.753539] pcieport-driver 0000:00:1c.5: found MSI capability [ 1.753559] pcieport-driver 0000:00:1c.5: irq 2300 for MSI/MSI-X [ 1.753569] pci_express 0000:00:1c.5:pcie00: allocate port service [ 1.753596] pci_express 0000:00:1c.5:pcie02: allocate port service [ 1.753624] pci_express 0000:00:1c.5:pcie03: allocate port service [ 1.753731] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.754135] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.754341] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.754343] ACPI: Power Button (FF) [PWRF] [ 1.754408] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.754410] ACPI: Power Button (CM) [PWRB] [ 1.754931] ACPI: SSDT CFF8E0D0, 01D2 (r1 AMI CPU1PM 1 INTL 20060113) [ 1.755440] processor ACPI_CPU:00: registered as cooling_device0 [ 1.755684] ACPI: SSDT CFF8E2B0, 0143 (r1 AMI CPU2PM 1 INTL 20060113) [ 1.756177] processor ACPI_CPU:01: registered as cooling_device1 [ 1.756422] ACPI: SSDT CFF8E400, 0143 (r1 AMI CPU3PM 1 INTL 20060113) [ 1.756920] processor ACPI_CPU:02: registered as cooling_device2 [ 1.757161] ACPI: SSDT CFF8E550, 0143 (r1 AMI CPU4PM 1 INTL 20060113) [ 1.757653] processor ACPI_CPU:03: registered as cooling_device3 [ 1.760424] isapnp: Scanning for PnP cards... [ 2.116072] isapnp: No Plug & Play device found [ 2.124052] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 2.124156] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.124598] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.125829] brd: module loaded [ 2.126349] loop: module loaded [ 2.126487] Fixed MDIO Bus: probed [ 2.126492] PPP generic driver version 2.4.2 [ 2.126588] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 2.126628] Driver 'sd' needs updating - please use bus_type methods [ 2.126652] Driver 'sr' needs updating - please use bus_type methods [ 2.126719] ahci 0000:00:1f.2: version 3.0 [ 2.126732] ahci 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 2.126767] ahci 0000:00:1f.2: irq 2299 for MSI/MSI-X [ 2.126832] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 2.126835] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems [ 2.126839] ahci 0000:00:1f.2: setting latency timer to 64 [ 2.127102] scsi0 : ahci [ 2.127270] scsi1 : ahci [ 2.127416] scsi2 : ahci [ 2.127552] scsi3 : ahci [ 2.127682] scsi4 : ahci [ 2.127808] scsi5 : ahci [ 2.127988] ata1: SATA max UDMA/133 abar m2048@0xf5ffe800 port 0xf5ffe900 irq 2299 [ 2.127990] ata2: SATA max UDMA/133 abar m2048@0xf5ffe800 port 0xf5ffe980 irq 2299 [ 2.127993] ata3: SATA max UDMA/133 abar m2048@0xf5ffe800 port 0xf5ffea00 irq 2299 [ 2.127995] ata4: SATA max UDMA/133 abar m2048@0xf5ffe800 port 0xf5ffea80 irq 2299 [ 2.127997] ata5: SATA max UDMA/133 abar m2048@0xf5ffe800 port 0xf5ffeb00 irq 2299 [ 2.128000] ata6: SATA max UDMA/133 abar m2048@0xf5ffe800 port 0xf5ffeb80 irq 2299 [ 2.650028] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.662693] ata1.00: ATA-8: WDC WD5000AAKS-22YGA0, 12.01C02, max UDMA/133 [ 2.662696] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2.663491] ata1.00: configured for UDMA/133 [ 3.030036] ata2: SATA link down (SStatus 0 SControl 300) [ 3.400025] ata3: SATA link down (SStatus 0 SControl 300) [ 3.770024] ata4: SATA link down (SStatus 0 SControl 300) [ 4.320026] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.331773] ata5.00: ATA-8: WDC WD5000AAKS-22YGA0, 12.01C02, max UDMA/133 [ 4.331776] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 4.332561] ata5.00: configured for UDMA/133 [ 4.880027] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.880305] ata6.00: ATAPI: ASUS DRW-2014L1T, 1.00, max UDMA/66, ATAPI AN [ 4.880773] ata6.00: configured for UDMA/66 [ 4.900121] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-2 12.0 PQ: 0 ANSI: 5 [ 4.900334] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 4.900352] sd 0:0:0:0: [sda] Write Protect is off [ 4.900355] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.900389] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.900439] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 4.900449] sd 0:0:0:0: [sda] Write Protect is off [ 4.900451] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.900470] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.900473] sda: sda1 sda2 sda3 [ 4.908300] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.908436] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.908544] scsi 4:0:0:0: Direct-Access ATA WDC WD5000AAKS-2 12.0 PQ: 0 ANSI: 5 [ 4.908760] sd 4:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 4.908778] sd 4:0:0:0: [sdb] Write Protect is off [ 4.908781] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.908810] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.908871] sd 4:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 4.908887] sd 4:0:0:0: [sdb] Write Protect is off [ 4.908890] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.908917] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.908922] sdb: sdb1 sdb2 sdb3 [ 4.917651] sd 4:0:0:0: [sdb] Attached SCSI disk [ 4.917771] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 4.918192] scsi 5:0:0:0: CD-ROM ASUS DRW-2014L1T 1.00 PQ: 0 ANSI: 5 [ 4.921051] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.921055] Uniform CD-ROM driver Revision: 3.20 [ 4.921245] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 4.921350] sr 5:0:0:0: Attached scsi generic sg2 type 5 [ 4.921381] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.942543] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 4.942546] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 4.942553] ahci 0000:03:00.0: setting latency timer to 64 [ 4.942720] scsi6 : ahci [ 4.942862] scsi7 : ahci [ 4.943023] ata7: SATA max UDMA/133 abar m8192@0xf9ffe000 port 0xf9ffe100 irq 16 [ 4.943028] ata8: SATA max UDMA/133 abar m8192@0xf9ffe000 port 0xf9ffe180 irq 16 [ 5.290036] ata7: SATA link down (SStatus 0 SControl 300) [ 5.660035] ata8: SATA link down (SStatus 0 SControl 300) [ 5.681482] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5.681511] pata_jmicron 0000:03:00.1: setting latency timer to 64 [ 5.681601] scsi8 : pata_jmicron [ 5.681752] scsi9 : pata_jmicron [ 5.682653] ata9: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 17 [ 5.682656] ata10: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 17 [ 6.012645] usbcore: registered new interface driver libusual [ 6.012756] usbcore: registered new interface driver usbserial [ 6.012804] USB Serial support registered for generic [ 6.012866] usbcore: registered new interface driver usbserial_generic [ 6.012869] usbserial: USB Serial Driver core [ 6.012991] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 6.012994] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 6.013582] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 6.022627] mice: PS/2 mouse device common for all mice [ 6.052657] rtc_cmos 00:03: RTC can wake from S4 [ 6.052740] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 6.052769] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 6.052908] device-mapper: uevent: version 1.0.3 [ 6.053083] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 6.053280] device-mapper: multipath: version 1.0.5 loaded [ 6.053293] device-mapper: multipath round-robin: version 1.0.0 loaded [ 6.053457] EISA: Probing bus 0 at eisa.0 [ 6.053486] EISA: Detected 0 cards. [ 6.053492] cpuidle: using governor ladder [ 6.053495] cpuidle: using governor menu [ 6.054061] TCP cubic registered [ 6.054298] NET: Registered protocol family 10 [ 6.054702] lo: Disabled Privacy Extensions [ 6.054957] NET: Registered protocol family 17 [ 6.055010] Bluetooth: L2CAP ver 2.11 [ 6.055013] Bluetooth: L2CAP socket layer initialized [ 6.055016] Bluetooth: SCO (Voice Link) ver 0.6 [ 6.055018] Bluetooth: SCO socket layer initialized [ 6.055056] Bluetooth: RFCOMM socket layer initialized [ 6.055066] Bluetooth: RFCOMM TTY layer initialized [ 6.055067] Bluetooth: RFCOMM ver 1.10 [ 6.056416] Using IPI No-Shortcut mode [ 6.056593] registered taskstats version 1 [ 6.056752] Magic number: 1:573:670 [ 6.056827] rtc_cmos 00:03: setting system clock to 2009-03-11 06:40:39 UTC (1236753639) [ 6.056829] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 6.056831] EDD information not available. [ 6.057010] Freeing unused kernel memory: 544k freed [ 6.057117] Write protecting the kernel text: 4120k [ 6.057194] Write protecting the kernel read-only data: 1544k [ 6.175578] md: linear personality registered for level -1 [ 6.177329] md: multipath personality registered for level -4 [ 6.178922] md: raid0 personality registered for level 0 [ 6.181361] md: raid1 personality registered for level 1 [ 6.182839] xor: automatically using best checksumming function: pIII_sse [ 6.231241] pIII_sse : 9347.200 MB/sec [ 6.231243] xor: using function: pIII_sse (9347.200 MB/sec) [ 6.231591] async_tx: api initialized (sync-only) [ 6.401306] raid6: int32x1 609 MB/s [ 6.571256] raid6: int32x2 646 MB/s [ 6.740030] raid6: int32x4 475 MB/s [ 6.910106] raid6: int32x8 463 MB/s [ 7.080016] raid6: mmxx1 2033 MB/s [ 7.250015] raid6: mmxx2 2333 MB/s [ 7.420006] raid6: sse1x1 1444 MB/s [ 7.590017] raid6: sse1x2 1817 MB/s [ 7.759994] raid6: sse2x1 2720 MB/s [ 7.930006] raid6: sse2x2 3352 MB/s [ 7.930008] raid6: using algorithm sse2x2 (3352 MB/s) [ 7.930012] md: raid6 personality registered for level 6 [ 7.930014] md: raid5 personality registered for level 5 [ 7.930017] md: raid4 personality registered for level 4 [ 7.937964] md: raid10 personality registered for level 10 [ 7.995594] Floppy drive(s): fd0 is 1.44M [ 8.013697] FDC 0 is a post-1991 82077 [ 8.016674] uhci_hcd: USB Universal Host Controller Interface driver [ 8.016730] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.016739] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 8.016743] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 8.016827] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 8.016852] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800 [ 8.016940] usb usb1: configuration #1 chosen from 1 choice [ 8.016972] hub 1-0:1.0: USB hub found [ 8.016980] hub 1-0:1.0: 2 ports detected [ 8.017097] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 8.017103] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 8.017107] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 8.017155] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 8.017186] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880 [ 8.017264] usb usb2: configuration #1 chosen from 1 choice [ 8.017298] hub 2-0:1.0: USB hub found [ 8.017305] hub 2-0:1.0: 2 ports detected [ 8.017403] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 8.017410] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 8.017414] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 8.017463] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 [ 8.017491] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00 [ 8.017570] usb usb3: configuration #1 chosen from 1 choice [ 8.017601] hub 3-0:1.0: USB hub found [ 8.017608] hub 3-0:1.0: 2 ports detected [ 8.017707] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 8.017714] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 8.017717] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 8.017766] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 8.017795] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080 [ 8.017870] usb usb4: configuration #1 chosen from 1 choice [ 8.017899] hub 4-0:1.0: USB hub found [ 8.017906] hub 4-0:1.0: 2 ports detected [ 8.017997] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 8.018003] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 8.018006] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 8.018057] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 8.018086] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 [ 8.018170] usb usb5: configuration #1 chosen from 1 choice [ 8.018203] hub 5-0:1.0: USB hub found [ 8.018210] hub 5-0:1.0: 2 ports detected [ 8.018298] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 8.018305] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 8.018308] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 8.018354] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 8.018376] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480 [ 8.018455] usb usb6: configuration #1 chosen from 1 choice [ 8.018483] hub 6-0:1.0: USB hub found [ 8.018490] hub 6-0:1.0: 2 ports detected [ 8.023878] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.023882] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 8.023909] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 8.023973] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 8.023977] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 8.024039] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7 [ 8.027923] ehci_hcd 0000:00:1a.7: debug port 1 [ 8.027929] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 8.027936] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf5fffc00 [ 8.035793] sky2 driver version 1.22 [ 8.035826] sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 8.035835] sky2 0000:02:00.0: setting latency timer to 64 [ 8.035875] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 3 [ 8.051305] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 8.051403] usb usb7: configuration #1 chosen from 1 choice [ 8.051438] hub 7-0:1.0: USB hub found [ 8.051446] hub 7-0:1.0: 6 ports detected [ 8.051568] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 8.051601] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 8.051605] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 8.051660] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8 [ 8.055547] ehci_hcd 0000:00:1d.7: debug port 1 [ 8.055553] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 8.055561] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf5fff800 [ 8.062973] ohci1394 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 8.068036] sky2 0000:02:00.0: Marvell Yukon 88E8056 Gigabit Ethernet Controller [ 8.068039] Part Number: Yukon 88E8056 [ 8.068041] Engineering Level: Rev. 1.2 [ 8.068044] Manufacturer: Marvell [ 8.068102] sky2 0000:02:00.0: irq 2298 for MSI/MSI-X [ 8.068878] sky2 eth0: addr 00:1e:8c:9a:90:89 [ 8.071282] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 8.071374] usb usb8: configuration #1 chosen from 1 choice [ 8.071407] hub 8-0:1.0: USB hub found [ 8.071415] hub 8-0:1.0: 6 ports detected [ 8.115136] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[febff000-febff7ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 8.125359] md: bind [ 8.147344] md: bind [ 8.156617] md: bind [ 8.195542] md: bind [ 8.197636] raid1: raid set md0 active with 2 out of 2 mirrors [ 8.199482] md0: unknown partition table [ 8.215078] md: bind [ 8.218042] raid1: raid set md1 active with 2 out of 2 mirrors [ 8.219903] md1: unknown partition table [ 8.227937] md: bind [ 8.230073] raid1: raid set md2 active with 2 out of 2 mirrors [ 8.231901] md2: unknown partition table [ 8.373803] usb 7-1: new high speed USB device using ehci_hcd and address 2 [ 8.616098] usb 7-1: configuration #1 chosen from 1 choice [ 8.621084] Initializing USB Mass Storage driver... [ 8.621742] PM: Starting manual resume from disk [ 8.621746] PM: Resume from partition 252:2 [ 8.621748] PM: Checking hibernation image. [ 8.621796] scsi10 : SCSI emulation for USB Mass Storage devices [ 8.621878] PM: Resume from disk failed. [ 8.622349] usb-storage: device found at 2 [ 8.622352] usb-storage: waiting for device to settle before scanning [ 8.622359] usbcore: registered new interface driver usb-storage [ 8.622364] USB Mass Storage support registered. [ 8.663130] kjournald starting. Commit interval 5 seconds [ 8.663145] EXT3-fs: mounted filesystem with ordered data mode. [ 8.730020] usb 7-3: new high speed USB device using ehci_hcd and address 3 [ 8.887347] usb 7-3: configuration #1 chosen from 1 choice [ 9.343765] usb 4-1: new low speed USB device using uhci_hcd and address 2 [ 9.441419] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0000215df8] [ 9.518956] usb 4-1: configuration #1 chosen from 1 choice [ 9.803767] usb 4-2: new low speed USB device using uhci_hcd and address 3 [ 9.977975] usb 4-2: configuration #1 chosen from 1 choice [ 10.263762] usb 6-2: new low speed USB device using uhci_hcd and address 2 [ 10.443562] usb 6-2: configuration #1 chosen from 1 choice [ 13.620206] usb-storage: device scan complete [ 13.651824] scsi 10:0:0:0: Direct-Access Generic 2.0 Reader-CF 1.00 PQ: 0 ANSI: 0 CCS [ 13.683444] scsi 10:0:0:1: Direct-Access Generic 2.0 Reader-Multi 1.00 PQ: 0 ANSI: 0 CCS [ 13.684644] sd 10:0:0:0: [sdc] Attached SCSI removable disk [ 13.684708] sd 10:0:0:0: Attached scsi generic sg3 type 0 [ 13.685613] sd 10:0:0:1: [sdd] Attached SCSI removable disk [ 13.685658] sd 10:0:0:1: Attached scsi generic sg4 type 0 [ 14.713161] udev: starting version 139 [ 15.002705] cfg80211: Using static regulatory domain info [ 15.002709] cfg80211: Regulatory domain: US [ 15.002711] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 15.002714] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 15.002717] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 15.002719] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 15.002722] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 15.002725] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 15.002727] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 15.002884] cfg80211: Calling CRDA for country: US [ 15.190606] phy0: Selected rate control algorithm 'minstrel' [ 15.210470] iTCO_vendor_support: vendor-support=0 [ 15.221712] Linux agpgart interface v0.103 [ 15.274965] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 15.362781] usbcore: registered new interface driver hiddev [ 15.380422] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.0/input/input4 [ 15.391567] generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.0-1/input0 [ 15.427360] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 15.427562] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860) [ 15.427625] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 15.761205] generic-usb 0003:050D:0912.0002: hiddev96,hidraw1: USB HID v1.11 Device [Belkin UPS] on usb-0000:00:1d.0-2/input0 [ 15.766151] nvidia: module license 'NVIDIA' taints kernel. [ 15.774956] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1d.2/usb6/6-2/6-2:1.0/input/input5 [ 15.883219] usbcore: registered new interface driver lmpcm_usb [ 15.883225] lmpcm_usb: v0.5.5:USB Logitech MediaPlay Cordless Mouse driver [ 15.919738] phy0: hwaddr f6444060, RTL8187vB (default) V1 + rtl8225z2 [ 15.919767] usbcore: registered new interface driver rtl8187 [ 16.021672] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 16.021682] nvidia 0000:01:00.0: setting latency timer to 64 [ 16.021942] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.35 Sun Feb 22 20:26:14 PST 2009 [ 16.043850] generic-usb 0003:0A81:0205.0003: input,hidraw2: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-2/input0 [ 16.068052] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1d.2/usb6/6-2/6-2:1.1/input/input6 [ 16.074695] Linux video capture interface: v2.00 [ 16.081390] generic-usb 0003:0A81:0205.0004: input,hidraw3: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-2/input1 [ 16.081429] usbcore: registered new interface driver usbhid [ 16.081432] usbhid: v2.6:USB HID core driver [ 16.178479] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded [ 16.178528] cx8800 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 16.179497] cx88[0]: subsystem: 0070:1402, board: Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T [card=53,autodetected], frontend(s): 2 [ 16.179500] cx88[0]: TV tuner type 63, Radio tuner type -1 [ 16.181840] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded [ 16.227441] cx2388x alsa driver version 0.0.6 loaded [ 16.250597] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 16.250665] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 16.305849] cx88[0]: i2c init: enabling analog demod on HVR1300/3000/4000 tuner [ 16.378229] tuner' 0-0043: chip found @ 0x86 (cx88[0]) [ 16.386347] tda9887 0-0043: creating new instance [ 16.386350] tda9887 0-0043: tda988[5/6/7] found [ 16.389588] tuner' 0-0061: chip found @ 0xc2 (cx88[0]) [ 16.390543] tuner' 0-0063: chip found @ 0xc6 (cx88[0]) [ 16.436823] tveeprom 0-0050: Hauppauge model 14109, rev B3D3, serial# 3250167 [ 16.436827] tveeprom 0-0050: MAC address is 00-0D-FE-31-97-F7 [ 16.436830] tveeprom 0-0050: tuner model is Philips FMD1216MEX (idx 133, type 78) [ 16.436834] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4) [ 16.436837] tveeprom 0-0050: audio processor is CX882 (idx 33) [ 16.436840] tveeprom 0-0050: decoder processor is CX882 (idx 25) [ 16.436843] tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter [ 16.436846] cx88[0]: hauppauge eeprom: model=14109 [ 16.452355] tuner-simple 0-0061: creating new instance [ 16.452359] tuner-simple 0-0061: type set to 78 (Philips FMD1216MEX MK3 Hybrid Tuner) [ 16.456407] input: cx88 IR (Hauppauge WinTV-HVR300 as /devices/pci0000:00/0000:00:1e.0/0000:05:02.0/input/input7 [ 16.472609] cx88[0]/0: found at 0000:05:02.0, rev: 5, irq: 18, latency: 64, mmio: 0xfa000000 [ 16.483934] wm8775' 0-001b: chip found @ 0x36 (cx88[0]) [ 16.490555] cx88[0]/0: registered device video0 [v4l2] [ 16.490641] cx88[0]/0: registered device vbi0 [ 16.490671] cx88[0]/0: registered device radio0 [ 16.494400] cx88[0]/2: cx2388x 8802 Driver Manager [ 16.494414] cx88-mpeg driver manager 0000:05:02.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 16.494424] cx88[0]/2: found at 0000:05:02.2, rev: 5, irq: 18, latency: 64, mmio: 0xfc000000 [ 16.494432] cx8802_probe() allocating 2 frontend(s) [ 16.494592] cx88_audio 0000:05:02.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 16.494623] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards [ 16.508736] cx88/2: cx2388x dvb driver version 0.0.6 loaded [ 16.508739] cx88/2: registering cx8802 driver, type: dvb access: shared [ 16.508743] cx88[0]/2: subsystem: 0070:1402, board: Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T [card=53] [ 16.508747] cx88[0]/2: cx2388x based DVB/ATSC card [ 16.534095] CX24123: detected CX24123 [ 16.562425] tuner-simple 0-0061: attaching existing instance [ 16.562429] tuner-simple 0-0061: type set to 63 (Philips FMD1216MEX MK3 Hybrid Tuner) [ 16.566328] DVB: registering new adapter (cx88[0]) [ 16.566331] DVB: registering adapter 0 frontend 0 (Conexant CX24123/CX24109)... [ 16.566640] DVB: registering adapter 0 frontend 1 (Conexant CX22702 DVB-T)... [ 16.879370] lp: driver loaded but no devices found [ 17.058581] Adding 4194296k swap on /dev/mapper/VG1-swap. Priority:-1 extents:1 across:4194296k [ 17.623828] EXT3 FS on md0, internal journal [ 19.210088] kjournald starting. Commit interval 5 seconds [ 19.231937] EXT3 FS on md2, internal journal [ 19.231943] EXT3-fs: mounted filesystem with ordered data mode. [ 19.318529] kjournald starting. Commit interval 5 seconds [ 19.353512] EXT3 FS on dm-0, internal journal [ 19.353518] EXT3-fs: mounted filesystem with ordered data mode. [ 19.424989] kjournald starting. Commit interval 5 seconds [ 19.425386] EXT3 FS on dm-1, internal journal [ 19.425392] EXT3-fs: mounted filesystem with ordered data mode. [ 20.012089] type=1505 audit(1236753653.443:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=3332 [ 20.126090] type=1505 audit(1236753653.563:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=3338 [ 20.126223] type=1505 audit(1236753653.563:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=3338 [ 20.126283] type=1505 audit(1236753653.563:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=3338 [ 20.126336] type=1505 audit(1236753653.563:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=3338 [ 20.324922] type=1505 audit(1236753653.763:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=3343 [ 20.325088] type=1505 audit(1236753653.763:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=3343 [ 20.377791] type=1505 audit(1236753653.813:9): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=3347 [ 20.421893] type=1505 audit(1236753653.863:10): operation="profile_load" name="/usr/sbin/mysqld-akonadi" name2="default" pid=3351 [ 20.471313] type=1505 audit(1236753653.913:11): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=3355 [ 20.695838] ip_tables: (C) 2000-2006 Netfilter Core Team [ 20.752464] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 20.752664] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 20.752667] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or [ 20.752669] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 20.816068] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 21.004794] sky2 eth0: enabling interface [ 21.005028] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.364095] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both [ 23.364305] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 25.935718] /dev/vmmon[4288]: Module vmmon: registered with major=10 minor=165 [ 25.935730] /dev/vmmon[4288]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0 [ 25.935738] /dev/vmmon[4288]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0 [ 25.935742] /dev/vmmon[4288]: Module vmmon: initialized [ 25.991901] /dev/vmci[4298]: VMCI: Driver initialized. [ 25.991952] /dev/vmci[4298]: Module vmci: registered with major=10 minor=56 [ 25.991955] /dev/vmci[4298]: Module vmci: initialized [ 26.112729] ppdev: user-space parallel port driver [ 26.245364] /dev/vmnet: open called by PID 4370 (vmnet-bridge) [ 26.245374] /dev/vmnet: hub 0 does not exist, allocating memory. [ 26.245385] /dev/vmnet: port on hub 0 successfully opened [ 26.245400] bridge-eth0: up [ 26.245405] bridge-eth0: attached [ 28.884851] /dev/vmnet: open called by PID 4969 (vmnet-dhcpd) [ 28.884861] /dev/vmnet: hub 1 does not exist, allocating memory. [ 28.884873] /dev/vmnet: port on hub 1 successfully opened [ 28.985622] /dev/vmnet: open called by PID 4973 (vmnet-netifup) [ 28.985632] /dev/vmnet: port on hub 1 successfully opened [ 29.041023] /dev/vmnet: open called by PID 4979 (vmnet-dhcpd) [ 29.041032] /dev/vmnet: hub 8 does not exist, allocating memory. [ 29.041043] /dev/vmnet: port on hub 8 successfully opened [ 29.068186] /dev/vmnet: open called by PID 4981 (vmnet-natd) [ 29.068200] /dev/vmnet: port on hub 8 successfully opened [ 29.135423] /dev/vmnet: open called by PID 4985 (vmnet-netifup) [ 29.135435] /dev/vmnet: port on hub 8 successfully opened [ 33.511257] eth0: no IPv6 routers present [ 36.531264] device eth0 entered promiscuous mode [ 38.849530] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 38.849533] Bluetooth: BNEP filters: protocol multicast [ 38.883003] Bridge firewalling registered [ 39.130006] vmnet1: no IPv6 routers present [ 39.380027] vmnet8: no IPv6 routers present