[ 0.000000] Linux version 4.15.0-39-generic (buildd@lgw01-amd64-054) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #42-Ubuntu SMP Tue Oct 23 15:48:01 UTC 2018 (Ubuntu 4.15.0-39.42-generic 4.15.18) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-39-generic root=UUID=419e0ab3-d507-43d0-8027-6d9bbdf46e98 ro quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support. [ 0.000000] random: get_random_u32 called from bsp_init_amd+0x255/0x2a0 with crng_init=0 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000006e000-0x000000000006ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000085fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000086000-0x00000000000bffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b6248fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b6249000-0x00000000b6849fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b684a000-0x00000000bf2befff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf2bf000-0x00000000bf6befff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000bf6bf000-0x00000000bfabefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bfabf000-0x00000000bfbbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bfbbf000-0x00000000bfbfefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bfbff000-0x00000000bfbfffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfc00000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by INSYDE Corp. [ 0.000000] efi: ACPI=0xbfbfe000 ACPI 2.0=0xbfbfe014 SMBIOS=0xbfabef98 [ 0.000000] secureboot: Secure boot could not be determined (mode 0) [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP ENVY m6 Notebook PC/18A6, BIOS F.34 05/22/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x41f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000BFBBD000 mask FFFFFFFFF000 uncachable [ 0.000000] 3 base 0000FFC00000 mask FFFFFFC00000 write-protect [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 000000041f000000 aka 16880M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: last_pfn = 0xbfc00 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 7c000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x3d3f3f000, 0x3d3f3ffff] PGTABLE [ 0.000000] BRK [0x3d3f40000, 0x3d3f40fff] PGTABLE [ 0.000000] BRK [0x3d3f41000, 0x3d3f41fff] PGTABLE [ 0.000000] BRK [0x3d3f42000, 0x3d3f42fff] PGTABLE [ 0.000000] BRK [0x3d3f43000, 0x3d3f43fff] PGTABLE [ 0.000000] BRK [0x3d3f44000, 0x3d3f44fff] PGTABLE [ 0.000000] BRK [0x3d3f45000, 0x3d3f45fff] PGTABLE [ 0.000000] BRK [0x3d3f46000, 0x3d3f46fff] PGTABLE [ 0.000000] BRK [0x3d3f47000, 0x3d3f47fff] PGTABLE [ 0.000000] BRK [0x3d3f48000, 0x3d3f48fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x31221000-0x34907fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000BFBFE014 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x00000000BFBFE120 00009C (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP 0x00000000BFBFC000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000) [ 0.000000] ACPI: DSDT 0x00000000BFBE8000 00FCCC (v01 HPQOEM 18A6 F0000000 ACPI 00040000) [ 0.000000] ACPI: FACS 0x00000000BFB7A000 000040 [ 0.000000] ACPI: UEFI 0x00000000BFBFD000 000236 (v01 HPQOEM 18A6 00000001 HP 00040000) [ 0.000000] ACPI: HPET 0x00000000BFBFB000 000038 (v01 HPQOEM 18A6 00000001 HP 00040000) [ 0.000000] ACPI: APIC 0x00000000BFBFA000 000084 (v03 HPQOEM 18A6 00000001 HP 00040000) [ 0.000000] ACPI: MCFG 0x00000000BFBF9000 00003C (v01 HPQOEM 18A6 00000001 HP 00040000) [ 0.000000] ACPI: ASF! 0x00000000BFBF8000 0000A5 (v32 HPQOEM 18A6 00000001 HP 00040000) [ 0.000000] ACPI: BOOT 0x00000000BFBE7000 000028 (v01 HPQOEM 18A6 00000001 HP 00040000) [ 0.000000] ACPI: WDRT 0x00000000BFBE6000 000047 (v01 HPQOEM 18A6 00000000 HP 00040000) [ 0.000000] ACPI: WDAT 0x00000000BFBE5000 0001AC (v01 HPQOEM 18A6 00000001 HP 00040000) [ 0.000000] ACPI: FPDT 0x00000000BFBE3000 000044 (v01 HPQOEM 18A6 00000001 HP 00040000) [ 0.000000] ACPI: MSDM 0x00000000BFBE2000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000) [ 0.000000] ACPI: SSDT 0x00000000BFBE1000 000B9C (v01 HPQOEM 18A6 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x00000000BFBDF000 001ECC (v02 HPQOEM 18A6 00000001 ACPI 00040000) [ 0.000000] ACPI: VFCT 0x00000000BFBD9000 005084 (v01 HPQOEM 18A6 00000001 HP 00040000) [ 0.000000] ACPI: BGRT 0x00000000BFBD8000 000038 (v01 HPQOEM 18A6 00000001 ACPI 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041effffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x41efd5000-0x41effffff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000041effffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000006dfff] [ 0.000000] node 0: [mem 0x0000000000070000-0x0000000000085fff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b6248fff] [ 0.000000] node 0: [mem 0x00000000b684a000-0x00000000bf2befff] [ 0.000000] node 0: [mem 0x00000000bfbff000-0x00000000bfbfffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000041effffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041effffff] [ 0.000000] On node 0 totalpages: 4054082 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 22 pages reserved [ 0.000000] DMA zone: 3971 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12147 pages used for memmap [ 0.000000] DMA32 zone: 777407 pages, LIFO batch:31 [ 0.000000] Normal zone: 51136 pages used for memmap [ 0.000000] Normal zone: 3272704 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 98 pages [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0006e000-0x0006ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x00086000-0x000bffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb6249000-0xb6849fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf2bf000-0xbf6befff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf6bf000-0xbfabefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfabf000-0xbfbbefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfbbf000-0xbfbfefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfc00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] [ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3990713 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-39-generic root=UUID=419e0ab3-d507-43d0-8027-6d9bbdf46e98 ro quiet splash vt.handoff=1 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 15768292K/16216328K available (12300K kernel code, 2472K rwdata, 4248K rodata, 2408K init, 2416K bss, 448036K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 39178 entries in 154 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#1 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 3 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 2295.806 MHz processor [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4591.61 BogoMIPS (lpj=9183224) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.028060] Security Framework initialized [ 0.028063] Yama: becoming mindful. [ 0.028099] AppArmor: AppArmor initialized [ 0.036264] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.038549] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.038644] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.038720] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.039002] mce: CPU supports 7 MCE banks [ 0.039020] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.039021] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.039023] Spectre V2 : Mitigation: Full AMD retpoline [ 0.039024] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.039026] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.048785] Freeing SMP alternatives memory: 36K [ 0.056000] APIC calibration not consistent with PM-Timer: 1071ms instead of 100ms [ 0.056000] APIC delta adjusted to PM-Timer: 623833 (6687419) [ 0.056000] smpboot: CPU0: AMD A10-4600M APU with Radeon(tm) HD Graphics (family: 0x15, model: 0x10, stepping: 0x1) [ 0.056000] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.056000] ... version: 0 [ 0.056000] ... bit width: 48 [ 0.056000] ... generic registers: 6 [ 0.056000] ... value mask: 0000ffffffffffff [ 0.056000] ... max period: 00007fffffffffff [ 0.056000] ... fixed-purpose events: 0 [ 0.056000] ... event mask: 000000000000003f [ 0.056000] Hierarchical SRCU implementation. [ 0.056000] smp: Bringing up secondary CPUs ... [ 0.056000] x86: Booting SMP configuration: [ 0.056000] .... node #0, CPUs: #1 [ 0.004000] do_IRQ: 1.55 No irq handler for vector [ 0.056000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.056000] #2 [ 0.004000] do_IRQ: 2.55 No irq handler for vector [ 0.066102] #3 [ 0.004000] do_IRQ: 3.55 No irq handler for vector [ 0.068081] smp: Brought up 1 node, 4 CPUs [ 0.068081] smpboot: Max logical packages: 1 [ 0.068081] smpboot: Total of 4 processors activated (18366.44 BogoMIPS) [ 0.069525] devtmpfs: initialized [ 0.069525] x86/mm: Memory block size: 128MB [ 0.072443] evm: security.selinux [ 0.072443] evm: security.SMACK64 [ 0.072444] evm: security.SMACK64EXEC [ 0.072444] evm: security.SMACK64TRANSMUTE [ 0.072445] evm: security.SMACK64MMAP [ 0.072446] evm: security.apparmor [ 0.072446] evm: security.ima [ 0.072447] evm: security.capability [ 0.072477] PM: Registering ACPI NVS region [mem 0x0006e000-0x0006ffff] (8192 bytes) [ 0.072477] PM: Registering ACPI NVS region [mem 0xbfabf000-0xbfbbefff] (1048576 bytes) [ 0.072477] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.072477] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.072477] pinctrl core: initialized pinctrl subsystem [ 0.072477] RTC time: 21:28:28, date: 11/20/18 [ 0.072502] NET: Registered protocol family 16 [ 0.072616] audit: initializing netlink subsys (disabled) [ 0.072626] audit: type=2000 audit(1542749307.072:1): state=initialized audit_enabled=0 res=1 [ 0.072626] cpuidle: using governor ladder [ 0.072626] cpuidle: using governor menu [ 0.072626] Simple Boot Flag at 0x44 set to 0x1 [ 0.072626] ACPI: bus type PCI registered [ 0.072626] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.072626] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.072626] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.072626] PCI: Using configuration type 1 for base access [ 0.076069] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.076069] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.076147] ACPI: Added _OSI(Module Device) [ 0.076149] ACPI: Added _OSI(Processor Device) [ 0.076149] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.076150] ACPI: Added _OSI(Processor Aggregator Device) [ 0.076152] ACPI: Added _OSI(Linux-Dell-Video) [ 0.076153] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.076426] ACPI: Executed 1 blocks of module-level executable AML code [ 0.086875] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.086875] ACPI: EC: EC started [ 0.086875] ACPI: EC: interrupt blocked [ 0.086875] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as first EC [ 0.086875] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.086875] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions [ 0.086875] ACPI: Interpreter enabled [ 0.086875] ACPI: (supports S0 S3 S4 S5) [ 0.086875] ACPI: Using IOAPIC for interrupt routing [ 0.086875] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.086987] ACPI: Enabled 6 GPEs in block 00 to 1F [ 0.184702] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.184710] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.184716] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.184734] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.185108] PCI host bridge to bus 0000:00 [ 0.185110] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.185112] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.185114] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.185116] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.185117] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.185119] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.185120] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.185122] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.185124] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.185125] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.185127] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.185128] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.185130] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.185132] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.185133] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.185135] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window] [ 0.185136] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window] [ 0.185138] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window] [ 0.185140] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.185150] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000 [ 0.185282] pci 0000:00:01.0: [1002:9900] type 00 class 0x030000 [ 0.185295] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref] [ 0.185300] pci 0000:00:01.0: reg 0x14: [io 0x3000-0x30ff] [ 0.185305] pci 0000:00:01.0: reg 0x18: [mem 0xf0300000-0xf033ffff] [ 0.185323] pci 0000:00:01.0: enabling Extended Tags [ 0.185332] pci 0000:00:01.0: BAR 0: assigned to efifb [ 0.185352] pci 0000:00:01.0: supports D1 D2 [ 0.185442] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300 [ 0.185454] pci 0000:00:01.1: reg 0x10: [mem 0xf0344000-0xf0347fff] [ 0.185478] pci 0000:00:01.1: enabling Extended Tags [ 0.185503] pci 0000:00:01.1: supports D1 D2 [ 0.185633] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400 [ 0.185655] pci 0000:00:04.0: enabling Extended Tags [ 0.185683] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.185782] pci 0000:00:05.0: [1022:1415] type 01 class 0x060400 [ 0.185804] pci 0000:00:05.0: enabling Extended Tags [ 0.185831] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.185996] pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330 [ 0.186023] pci 0000:00:10.0: reg 0x10: [mem 0xf0348000-0xf0349fff 64bit] [ 0.186121] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold [ 0.186247] pci 0000:00:10.1: [1022:7812] type 00 class 0x0c0330 [ 0.186274] pci 0000:00:10.1: reg 0x10: [mem 0xf034a000-0xf034bfff 64bit] [ 0.186371] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold [ 0.186494] pci 0000:00:11.0: [1022:7804] type 00 class 0x010601 [ 0.186512] pci 0000:00:11.0: reg 0x10: [io 0x3118-0x311f] [ 0.186520] pci 0000:00:11.0: reg 0x14: [io 0x3124-0x3127] [ 0.186528] pci 0000:00:11.0: reg 0x18: [io 0x3110-0x3117] [ 0.186536] pci 0000:00:11.0: reg 0x1c: [io 0x3120-0x3123] [ 0.186545] pci 0000:00:11.0: reg 0x20: [io 0x3100-0x310f] [ 0.186553] pci 0000:00:11.0: reg 0x24: [mem 0xf0350000-0xf03507ff] [ 0.186773] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310 [ 0.186789] pci 0000:00:12.0: reg 0x10: [mem 0xf034f000-0xf034ffff] [ 0.186944] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320 [ 0.187754] pci 0000:00:12.2: reg 0x10: [mem 0xf034e000-0xf034e0ff] [ 0.189861] pci 0000:00:12.2: supports D1 D2 [ 0.189863] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.190151] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310 [ 0.190167] pci 0000:00:13.0: reg 0x10: [mem 0xf034d000-0xf034dfff] [ 0.190323] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320 [ 0.191071] pci 0000:00:13.2: reg 0x10: [mem 0xf034c000-0xf034c0ff] [ 0.193318] pci 0000:00:13.2: supports D1 D2 [ 0.193320] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.193417] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500 [ 0.193579] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300 [ 0.193601] pci 0000:00:14.2: reg 0x10: [mem 0xf0340000-0xf0343fff 64bit] [ 0.193660] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.193761] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100 [ 0.193909] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401 [ 0.194051] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000 [ 0.194142] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000 [ 0.194229] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000 [ 0.194317] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000 [ 0.194408] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000 [ 0.194498] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000 [ 0.194701] pci 0000:01:00.0: [10ec:5289] type 00 class 0xff0000 [ 0.194724] pci 0000:01:00.0: reg 0x10: [mem 0xf0200000-0xf020ffff] [ 0.194833] pci 0000:01:00.0: supports D1 D2 [ 0.194835] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.194922] pci 0000:01:00.2: [10ec:8168] type 00 class 0x020000 [ 0.194943] pci 0000:01:00.2: reg 0x10: [io 0x2000-0x20ff] [ 0.194964] pci 0000:01:00.2: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref] [ 0.194978] pci 0000:01:00.2: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref] [ 0.195045] pci 0000:01:00.2: supports D1 D2 [ 0.195046] pci 0000:01:00.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.208055] pci 0000:00:04.0: PCI bridge to [bus 01] [ 0.208062] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff] [ 0.208066] pci 0000:00:04.0: bridge window [mem 0xf0200000-0xf02fffff] [ 0.208070] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.208201] pci 0000:02:00.0: [168c:0032] type 00 class 0x028000 [ 0.208229] pci 0000:02:00.0: reg 0x10: [mem 0xf0100000-0xf017ffff 64bit] [ 0.208266] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ 0.208349] pci 0000:02:00.0: supports D1 D2 [ 0.208351] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.220060] pci 0000:00:05.0: PCI bridge to [bus 02] [ 0.220069] pci 0000:00:05.0: bridge window [mem 0xf0100000-0xf01fffff] [ 0.220203] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.220211] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.220213] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.220215] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.220217] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode) [ 0.220218] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode) [ 0.220220] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode) [ 0.220222] pci 0000:00:14.4: bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode) [ 0.220223] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode) [ 0.220225] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) [ 0.220226] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) [ 0.220228] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) [ 0.220229] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode) [ 0.220231] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode) [ 0.220233] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode) [ 0.220234] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode) [ 0.220236] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf7ffffff window] (subtractive decode) [ 0.220238] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfed3ffff window] (subtractive decode) [ 0.220239] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff window] (subtractive decode) [ 0.220734] ACPI: IRQ 7 override to edge, high [ 0.304864] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.304972] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.305086] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.305192] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.305293] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.305370] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.305454] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.305531] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.305831] ACPI: EC: interrupt unblocked [ 0.305883] ACPI: EC: event unblocked [ 0.305891] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.305893] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions and events [ 0.306214] SCSI subsystem initialized [ 0.308054] libata version 3.00 loaded. [ 0.308054] pci 0000:00:01.0: vgaarb: setting as boot VGA device [ 0.308054] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.308054] pci 0000:00:01.0: vgaarb: bridge control possible [ 0.308054] vgaarb: loaded [ 0.308054] ACPI: bus type USB registered [ 0.308070] usbcore: registered new interface driver usbfs [ 0.308080] usbcore: registered new interface driver hub [ 0.308112] usbcore: registered new device driver usb [ 0.308174] EDAC MC: Ver: 3.0.0 [ 0.308174] Registered efivars operations [ 1.188052] PCI: Using ACPI for IRQ routing [ 1.189841] PCI: pci_cache_line_size set to 64 bytes [ 1.189934] e820: reserve RAM buffer [mem 0x0006e000-0x0006ffff] [ 1.189936] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff] [ 1.189937] e820: reserve RAM buffer [mem 0xb6249000-0xb7ffffff] [ 1.189938] e820: reserve RAM buffer [mem 0xbf2bf000-0xbfffffff] [ 1.189939] e820: reserve RAM buffer [mem 0xbfc00000-0xbfffffff] [ 1.189940] e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff] [ 1.190082] NetLabel: Initializing [ 1.190083] NetLabel: domain hash size = 128 [ 1.190084] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.190101] NetLabel: unlabeled traffic allowed by default [ 1.190128] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.190128] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 1.192141] clocksource: Switched to clocksource hpet [ 1.210020] VFS: Disk quotas dquot_6.6.0 [ 1.210042] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.210206] AppArmor: AppArmor Filesystem Enabled [ 1.210246] pnp: PnP ACPI init [ 1.210503] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.210505] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.210512] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.210864] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.210925] pnp 00:02: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active) [ 1.210990] pnp 00:03: Plug and Play ACPI device, IDs SYN1e77 SYN1e00 SYN0002 PNP0f13 (active) [ 1.211055] system 00:04: [io 0x0400-0x04cf] has been reserved [ 1.211057] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 1.211059] system 00:04: [io 0x04d6] has been reserved [ 1.211060] system 00:04: [io 0x0680-0x06ff] has been reserved [ 1.211062] system 00:04: [io 0x077a] has been reserved [ 1.211064] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 1.211066] system 00:04: [io 0x0c14] has been reserved [ 1.211068] system 00:04: [io 0x0c50-0x0c52] has been reserved [ 1.211069] system 00:04: [io 0x0c6c] has been reserved [ 1.211071] system 00:04: [io 0x0c6f] has been reserved [ 1.211073] system 00:04: [io 0x0cd0-0x0cdb] could not be reserved [ 1.211075] system 00:04: [io 0x0840-0x0847] has been reserved [ 1.211080] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.211183] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved [ 1.211186] system 00:05: [mem 0xffc00000-0xffffffff] has been reserved [ 1.211190] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.292858] pnp: PnP ACPI: found 6 devices [ 1.300261] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.300269] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window [ 1.300295] pci 0000:00:04.0: PCI bridge to [bus 01] [ 1.300297] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff] [ 1.300302] pci 0000:00:04.0: bridge window [mem 0xf0200000-0xf02fffff] [ 1.300304] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 1.300311] pci 0000:02:00.0: BAR 6: assigned [mem 0xf0180000-0xf018ffff pref] [ 1.300313] pci 0000:00:05.0: PCI bridge to [bus 02] [ 1.300317] pci 0000:00:05.0: bridge window [mem 0xf0100000-0xf01fffff] [ 1.300322] pci 0000:00:14.4: PCI bridge to [bus 03] [ 1.300334] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.300335] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.300337] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.300339] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 1.300341] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 1.300342] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 1.300344] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 1.300346] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 1.300347] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 1.300349] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 1.300350] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 1.300352] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] [ 1.300354] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] [ 1.300355] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] [ 1.300357] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] [ 1.300358] pci_bus 0000:00: resource 19 [mem 0xe0000000-0xf7ffffff window] [ 1.300360] pci_bus 0000:00: resource 20 [mem 0xfc000000-0xfed3ffff window] [ 1.300362] pci_bus 0000:00: resource 21 [mem 0xfed45000-0xffffffff window] [ 1.300363] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 1.300365] pci_bus 0000:01: resource 1 [mem 0xf0200000-0xf02fffff] [ 1.300366] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 1.300368] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff] [ 1.300370] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 1.300372] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 1.300373] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.300375] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000c3fff window] [ 1.300376] pci_bus 0000:03: resource 8 [mem 0x000c4000-0x000c7fff window] [ 1.300378] pci_bus 0000:03: resource 9 [mem 0x000c8000-0x000cbfff window] [ 1.300379] pci_bus 0000:03: resource 10 [mem 0x000cc000-0x000cffff window] [ 1.300381] pci_bus 0000:03: resource 11 [mem 0x000d0000-0x000d3fff window] [ 1.300382] pci_bus 0000:03: resource 12 [mem 0x000d4000-0x000d7fff window] [ 1.300384] pci_bus 0000:03: resource 13 [mem 0x000d8000-0x000dbfff window] [ 1.300385] pci_bus 0000:03: resource 14 [mem 0x000dc000-0x000dffff window] [ 1.300387] pci_bus 0000:03: resource 15 [mem 0x000e0000-0x000e3fff window] [ 1.300388] pci_bus 0000:03: resource 16 [mem 0x000e4000-0x000e7fff window] [ 1.300390] pci_bus 0000:03: resource 17 [mem 0x000e8000-0x000ebfff window] [ 1.300391] pci_bus 0000:03: resource 18 [mem 0x000ec000-0x000effff window] [ 1.300393] pci_bus 0000:03: resource 19 [mem 0xe0000000-0xf7ffffff window] [ 1.300395] pci_bus 0000:03: resource 20 [mem 0xfc000000-0xfed3ffff window] [ 1.300396] pci_bus 0000:03: resource 21 [mem 0xfed45000-0xffffffff window] [ 1.300539] NET: Registered protocol family 2 [ 1.300826] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.301172] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.301431] TCP: Hash tables configured (established 131072 bind 65536) [ 1.301509] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 1.301595] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 1.301731] NET: Registered protocol family 1 [ 1.301752] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.868408] pci 0000:00:12.2: PME# does not work under D3, disabling it [ 1.968408] pci 0000:00:13.2: PME# does not work under D3, disabling it [ 1.968508] PCI: CLS 64 bytes, default 64 [ 1.968568] Unpacking initramfs... [ 2.954767] Freeing initrd memory: 56220K [ 2.954830] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.954834] software IO TLB [mem 0xb83c8000-0xbc3c8000] (64MB) mapped at [ (ptrval)- (ptrval)] [ 2.954893] amd_uncore: AMD NB counters detected [ 2.955203] LVT offset 0 assigned for vector 0x400 [ 2.955427] perf: AMD IBS detected (0x000000ff) [ 2.955588] Scanning for low memory corruption every 60 seconds [ 2.957812] Initialise system trusted keyrings [ 2.957841] Key type blacklist registered [ 2.958104] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 2.962969] zbud: loaded [ 2.964659] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.965354] fuse init (API version 7.26) [ 2.971195] Key type asymmetric registered [ 2.971199] Asymmetric key parser 'x509' registered [ 2.971302] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 2.971436] io scheduler noop registered [ 2.971441] io scheduler deadline registered [ 2.971605] io scheduler cfq registered (default) [ 2.973144] efifb: probing for efifb [ 2.973179] efifb: framebuffer at 0xe0000000, using 4224k, total 4224k [ 2.973183] efifb: mode is 1366x768x32, linelength=5632, pages=1 [ 2.973184] efifb: scrolling: redraw [ 2.973189] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.973616] Console: switching to colour frame buffer device 170x48 [ 2.973679] fb0: EFI VGA frame buffer device [ 2.975594] ACPI: AC Adapter [ACAD] (on-line) [ 2.975758] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.975829] ACPI: Power Button [PWRB] [ 2.975986] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 2.976116] ACPI: Lid Switch [LID] [ 2.976240] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.976323] ACPI: Power Button [PWRF] [ 2.978592] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 2.978845] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.978848] ACPI: Thermal Zone [TSZ0] (40 C) [ 2.979601] thermal LNXTHERM:01: registered as thermal_zone1 [ 2.979605] ACPI: Thermal Zone [TSZ2] (40 C) [ 2.980231] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.989905] Linux agpgart interface v0.103 [ 2.997945] loop: module loaded [ 2.998578] libphy: Fixed MDIO Bus: probed [ 2.998581] tun: Universal TUN/TAP device driver, 1.6 [ 2.998836] PPP generic driver version 2.4.2 [ 2.999029] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.999036] ehci-pci: EHCI PCI platform driver [ 2.999445] QUIRK: Enable AMD PLL fix [ 2.999512] ehci-pci 0000:00:12.2: EHCI Host Controller [ 2.999528] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 2.999540] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.999569] ehci-pci 0000:00:12.2: debug port 1 [ 2.999656] ehci-pci 0000:00:12.2: irq 17, io mem 0xf034e000 [ 3.012196] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 3.012402] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.012408] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.012413] usb usb1: Product: EHCI Host Controller [ 3.012417] usb usb1: Manufacturer: Linux 4.15.0-39-generic ehci_hcd [ 3.012421] usb usb1: SerialNumber: 0000:00:12.2 [ 3.012958] hub 1-0:1.0: USB hub found [ 3.012980] hub 1-0:1.0: 5 ports detected [ 3.014103] ehci-pci 0000:00:13.2: EHCI Host Controller [ 3.014120] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 3.014130] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 3.014159] ehci-pci 0000:00:13.2: debug port 1 [ 3.014222] ehci-pci 0000:00:13.2: irq 17, io mem 0xf034c000 [ 3.028206] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 3.028401] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.028407] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.028412] usb usb2: Product: EHCI Host Controller [ 3.028417] usb usb2: Manufacturer: Linux 4.15.0-39-generic ehci_hcd [ 3.028421] usb usb2: SerialNumber: 0000:00:13.2 [ 3.029056] hub 2-0:1.0: USB hub found [ 3.029080] hub 2-0:1.0: 5 ports detected [ 3.029976] ehci-platform: EHCI generic platform driver [ 3.030024] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.030039] ohci-pci: OHCI PCI platform driver [ 3.030451] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 3.030467] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 3.030531] ohci-pci 0000:00:12.0: irq 18, io mem 0xf034f000 [ 3.092335] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.092343] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.092348] usb usb3: Product: OHCI PCI host controller [ 3.092352] usb usb3: Manufacturer: Linux 4.15.0-39-generic ohci_hcd [ 3.092357] usb usb3: SerialNumber: 0000:00:12.0 [ 3.092972] hub 3-0:1.0: USB hub found [ 3.093042] hub 3-0:1.0: 5 ports detected [ 3.094081] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 3.094097] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4 [ 3.094168] ohci-pci 0000:00:13.0: irq 18, io mem 0xf034d000 [ 3.156328] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.156336] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.156341] usb usb4: Product: OHCI PCI host controller [ 3.156345] usb usb4: Manufacturer: Linux 4.15.0-39-generic ohci_hcd [ 3.156350] usb usb4: SerialNumber: 0000:00:13.0 [ 3.156908] hub 4-0:1.0: USB hub found [ 3.156977] hub 4-0:1.0: 5 ports detected [ 3.157619] ohci-platform: OHCI generic platform driver [ 3.157660] uhci_hcd: USB Universal Host Controller Interface driver [ 3.158222] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 3.158244] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5 [ 3.158468] xhci_hcd 0000:00:10.0: hcc params 0x014042c3 hci version 0x96 quirks 0x00000608 [ 3.159008] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.159014] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.159018] usb usb5: Product: xHCI Host Controller [ 3.159023] usb usb5: Manufacturer: Linux 4.15.0-39-generic xhci-hcd [ 3.159027] usb usb5: SerialNumber: 0000:00:10.0 [ 3.159460] hub 5-0:1.0: USB hub found [ 3.159497] hub 5-0:1.0: 2 ports detected [ 3.159810] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 3.159821] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6 [ 3.159830] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed [ 3.161889] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.161969] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.161974] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.161979] usb usb6: Product: xHCI Host Controller [ 3.161983] usb usb6: Manufacturer: Linux 4.15.0-39-generic xhci-hcd [ 3.161987] usb usb6: SerialNumber: 0000:00:10.0 [ 3.162427] hub 6-0:1.0: USB hub found [ 3.162463] hub 6-0:1.0: 2 ports detected [ 3.163101] xhci_hcd 0000:00:10.1: xHCI Host Controller [ 3.163116] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 7 [ 3.163330] xhci_hcd 0000:00:10.1: hcc params 0x014042c3 hci version 0x96 quirks 0x00000608 [ 3.163857] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.163863] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.163867] usb usb7: Product: xHCI Host Controller [ 3.163872] usb usb7: Manufacturer: Linux 4.15.0-39-generic xhci-hcd [ 3.163876] usb usb7: SerialNumber: 0000:00:10.1 [ 3.164361] hub 7-0:1.0: USB hub found [ 3.164397] hub 7-0:1.0: 2 ports detected [ 3.164748] xhci_hcd 0000:00:10.1: xHCI Host Controller [ 3.164760] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8 [ 3.164769] xhci_hcd 0000:00:10.1: Host supports USB 3.0 SuperSpeed [ 3.166755] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.166838] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.166843] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.166848] usb usb8: Product: xHCI Host Controller [ 3.166852] usb usb8: Manufacturer: Linux 4.15.0-39-generic xhci-hcd [ 3.166856] usb usb8: SerialNumber: 0000:00:10.1 [ 3.167310] hub 8-0:1.0: USB hub found [ 3.167345] hub 8-0:1.0: 2 ports detected [ 3.167824] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 3.222758] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.222762] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.223080] mousedev: PS/2 mouse device common for all mice [ 3.224224] rtc_cmos 00:01: RTC can wake from S4 [ 3.224367] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 3.224393] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs [ 3.224404] i2c /dev entries driver [ 3.224413] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0 [ 3.224584] device-mapper: uevent: version 1.0.3 [ 3.224718] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 3.226034] ledtrig-cpu: registered to indicate activity on CPUs [ 3.226037] EFI Variables Facility v0.08 2004-May-17 [ 3.279028] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 3.364164] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 3.456071] [Firmware Bug]: battery: (dis)charge rate invalid. [ 3.456115] ACPI: Battery Slot [BAT1] (battery present) [ 3.574645] usb 2-1: New USB device found, idVendor=064e, idProduct=c336 [ 3.574649] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.574651] usb 2-1: Product: HP Truevision HD [ 3.574652] usb 2-1: Manufacturer: SuYin [ 3.574654] usb 2-1: SerialNumber: HF1318-P62A-SN03-1-REV0207 [ 3.616026] usb 3-1: new low-speed USB device number 2 using ohci-pci [ 3.810625] usb 3-1: New USB device found, idVendor=18f8, idProduct=0f99 [ 3.810627] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.810629] usb 3-1: Product: USB OPTICAL MOUSE [ 3.964162] tsc: Refined TSC clocksource calibration: 2295.738 MHz [ 3.964198] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x21177ae19ae, max_idle_ns: 440795231433 ns [ 4.088046] usb 4-3: new full-speed USB device number 2 using ohci-pci [ 4.112787] NET: Registered protocol family 10 [ 4.127407] Segment Routing with IPv6 [ 4.127478] NET: Registered protocol family 17 [ 4.127628] Key type dns_resolver registered [ 4.128541] RAS: Correctable Errors collector initialized. [ 4.128549] microcode: microcode updated early to new patch_level=0x06001119 [ 4.128638] microcode: CPU0: patch_level=0x06001119 [ 4.128674] microcode: CPU1: patch_level=0x06001119 [ 4.128781] microcode: CPU2: patch_level=0x06001119 [ 4.128808] microcode: CPU3: patch_level=0x06001119 [ 4.128935] microcode: Microcode Update Driver: v2.2. [ 4.128961] sched_clock: Marking stable (4128917261, 0)->(5271707450, -1142790189) [ 4.129740] registered taskstats version 1 [ 4.129766] Loading compiled-in X.509 certificates [ 4.139266] Loaded X.509 cert 'Build time autogenerated kernel key: 28c680bedc8638650c29d29ff1fd33ae66a2014d' [ 4.170863] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring [ 4.170944] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring [ 4.200604] Couldn't get size: 0x800000000000000e [ 4.200612] MODSIGN: Couldn't get UEFI MokListRT [ 4.207883] zswap: loaded using pool lzo/zbud [ 4.221379] Key type big_key registered [ 4.221393] Key type trusted registered [ 4.227804] Key type encrypted registered [ 4.227820] AppArmor: AppArmor sha1 policy hashing enabled [ 4.227827] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 4.227844] ima: Allocated hash algorithm: sha1 [ 4.227885] evm: HMAC attrs: 0x1 [ 4.229027] Magic number: 10:688:500 [ 4.229360] rtc_cmos 00:01: setting system clock to 2018-11-20 21:28:32 UTC (1542749312) [ 4.230020] acpi_cpufreq: overriding BIOS provided _PSD data [ 4.230779] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 4.230780] EDD information not available. [ 4.280736] usb 4-3: New USB device found, idVendor=138a, idProduct=0018 [ 4.280744] usb 4-3: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 4.280748] usb 4-3: SerialNumber: 312e4d7138e1 [ 4.900647] Freeing unused kernel memory: 2408K [ 4.932166] Write protecting the kernel read-only data: 20480k [ 4.934205] Freeing unused kernel memory: 2008K [ 4.939827] Freeing unused kernel memory: 1896K [ 4.949880] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.992056] clocksource: Switched to clocksource tsc [ 5.159526] cmi: probe of SMB0001:00 failed with error -5 [ 5.160276] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 5.161150] acpi device:00: registered as cooling_device4 [ 5.161254] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 5.171204] wmi_bus wmi_bus-PNP0C14:00: WQBJ data block query control method not found [ 5.175916] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 5.175931] r8169 0000:01:00.2: can't disable ASPM; OS doesn't have ASPM control [ 5.176805] r8169 0000:01:00.2 eth0: RTL8411 at 0x (ptrval), 6c:3b:e5:89:a5:03, XID 08800800 IRQ 35 [ 5.176808] r8169 0000:01:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 5.178982] ahci 0000:00:11.0: version 3.0 [ 5.179370] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 5.179374] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 5.183447] hidraw: raw HID events driver (C) Jiri Kosina [ 5.184334] scsi host0: ahci [ 5.186443] scsi host1: ahci [ 5.186537] ata1: SATA max UDMA/133 abar m2048@0xf0350000 port 0xf0350100 irq 36 [ 5.186539] ata2: SATA max UDMA/133 abar m2048@0xf0350000 port 0xf0350180 irq 36 [ 5.186660] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\_SB.PCI0.SMBS.SMB0) (20170831/utaddress-247) [ 5.186669] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.195905] usbcore: registered new interface driver usbhid [ 5.195907] usbhid: USB HID core driver [ 5.222037] r8169 0000:01:00.2 eno1: renamed from eth0 [ 5.230146] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:18F8:0F99.0001/input/input7 [ 5.230371] hid-generic 0003:18F8:0F99.0001: input,hidraw0: USB HID v1.10 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:12.0-1/input0 [ 5.231488] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/0003:18F8:0F99.0002/input/input8 [ 5.236746] [drm] radeon kernel modesetting enabled. [ 5.236797] checking generic (e0000000 420000) vs hw (e0000000 10000000) [ 5.236798] fb: switching to radeondrmfb from EFI VGA [ 5.236828] Console: switching to colour dummy device 80x25 [ 5.237289] [drm] initializing kernel modesetting (ARUBA 0x1002:0x9900 0x103C:0x18A6 0x00). [ 5.237315] ATOM BIOS: HP [ 5.237374] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used) [ 5.237376] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF [ 5.237380] [drm] Detected VRAM RAM=512M, BAR=256M [ 5.237381] [drm] RAM width 64bits DDR [ 5.237456] [TTM] Zone kernel: Available graphics memory: 7936860 kiB [ 5.237457] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 5.237458] [TTM] Initializing pool allocator [ 5.237462] [TTM] Initializing DMA pool allocator [ 5.237485] [drm] radeon: 512M of VRAM memory ready [ 5.237486] [drm] radeon: 1024M of GTT memory ready. [ 5.237494] [drm] Loading ARUBA Microcode [ 5.237554] [drm] Internal thermal controller without fan control [ 5.237703] [drm] radeon: dpm initialized [ 5.239196] [drm] Found VCE firmware/feedback version 50.0.1 / 17! [ 5.239206] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 5.269767] [drm] PCIE GART of 1024M enabled (table at 0x00000000001D6000). [ 5.269931] radeon 0000:00:01.0: WB enabled [ 5.269935] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x (ptrval) [ 5.270314] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0x (ptrval) [ 5.288304] hid-generic 0003:18F8:0F99.0002: input,hiddev0,hidraw1: USB HID v1.10 Keyboard [USB OPTICAL MOUSE ] on usb-0000:00:12.0-1/input1 [ 5.290344] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0x (ptrval) [ 5.290347] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0x (ptrval) [ 5.290349] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0x (ptrval) [ 5.290352] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0x (ptrval) [ 5.290354] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x (ptrval) [ 5.290357] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0x (ptrval) [ 5.290378] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.290379] [drm] Driver supports precise vblank timestamp query. [ 5.290381] radeon 0000:00:01.0: radeon: MSI limited to 32-bit [ 5.290436] radeon 0000:00:01.0: radeon: using MSI. [ 5.290464] [drm] radeon: irq initialized. [ 5.309182] [drm] ring test on 0 succeeded in 2 usecs [ 5.309190] [drm] ring test on 3 succeeded in 3 usecs [ 5.309195] [drm] ring test on 4 succeeded in 3 usecs [ 5.354896] [drm] ring test on 5 succeeded in 1 usecs [ 5.374771] [drm] UVD initialized successfully. [ 5.484045] [drm] ring test on 6 succeeded in 17 usecs [ 5.484055] [drm] ring test on 7 succeeded in 3 usecs [ 5.484055] [drm] VCE initialized successfully. [ 5.484573] [drm] ib test on ring 0 succeeded in 0 usecs [ 5.484631] [drm] ib test on ring 3 succeeded in 0 usecs [ 5.484700] [drm] ib test on ring 4 succeeded in 0 usecs [ 5.656135] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.658875] ata2.00: ATAPI: hp DVD RAM UJ8C2, 1.00, max UDMA/133 [ 5.660179] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.661305] ata2.00: configured for UDMA/133 [ 5.661834] ata1.00: ATA-8: Hitachi HTS547575A9E384, JE4OA50A, max UDMA/100 [ 5.661838] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 5.663588] ata1.00: configured for UDMA/100 [ 5.663984] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54757 A50A PQ: 0 ANSI: 5 [ 5.664538] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.664583] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB) [ 5.664586] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 5.664612] sd 0:0:0:0: [sda] Write Protect is off [ 5.664615] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.664665] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.665651] scsi 1:0:0:0: CD-ROM hp DVD RAM UJ8C2 1.00 PQ: 0 ANSI: 5 [ 5.723808] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.723811] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.724075] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 5.724226] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 5.991529] sda: sda1 sda2 [ 5.992355] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.016443] [drm] ib test on ring 5 succeeded [ 6.257332] random: fast init done [ 6.412352] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 6.420662] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 6.556168] [drm] ib test on ring 6 succeeded [ 6.728984] psmouse serio1: synaptics: queried max coordinates: x [..5684], y [..4862] [ 6.857798] psmouse serio1: synaptics: queried min coordinates: x [1258..], y [992..] [ 6.857808] psmouse serio1: synaptics: Your touchpad (PNP: SYN1e77 SYN1e00 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org. [ 7.068148] [drm] ib test on ring 7 succeeded [ 7.068473] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 7.072705] [drm] radeon atom DIG backlight initialized [ 7.072706] [drm] Radeon Display Connectors [ 7.072707] [drm] Connector 0: [ 7.072708] [drm] LVDS-1 [ 7.072709] [drm] HPD1 [ 7.072711] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c [ 7.072711] [drm] Encoders: [ 7.072712] [drm] LCD1: INTERNAL_UNIPHY2 [ 7.072713] [drm] LCD1: TRAVIS [ 7.072714] [drm] Connector 1: [ 7.072714] [drm] VGA-1 [ 7.072715] [drm] HPD2 [ 7.072716] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c [ 7.072717] [drm] Encoders: [ 7.072718] [drm] CRT1: INTERNAL_UNIPHY2 [ 7.072718] [drm] CRT1: NUTMEG [ 7.072719] [drm] Connector 2: [ 7.072719] [drm] HDMI-A-1 [ 7.072720] [drm] HPD3 [ 7.072722] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c [ 7.072722] [drm] Encoders: [ 7.072723] [drm] DFP1: INTERNAL_UNIPHY [ 7.090932] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00223/0x840300/0x26c00/0x0, board id: 2054, fw id: 1196324 [ 7.237984] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 7.341136] [drm] fb mappable at 0xE03DA000 [ 7.341138] [drm] vram apper at 0xE0000000 [ 7.341140] [drm] size 4325376 [ 7.341141] [drm] fb depth is 24 [ 7.341142] [drm] pitch is 5632 [ 7.341423] fbcon: radeondrmfb (fb0) is primary device [ 7.341513] Console: switching to colour frame buffer device 170x48 [ 7.341548] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device [ 7.357312] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0 [ 10.711102] random: crng init done [ 10.711106] random: 7 urandom warning(s) missed due to ratelimiting [ 22.185850] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 24.289431] ip_tables: (C) 2000-2006 Netfilter Core Team [ 26.266612] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 26.284686] systemd[1]: Detected architecture x86-64. [ 26.310765] systemd[1]: Set hostname to . [ 29.453726] systemd[1]: Created slice User and Session Slice. [ 29.453832] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 29.453850] systemd[1]: Reached target Remote File Systems. [ 29.454110] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 29.454129] systemd[1]: Reached target Libvirt guests shutdown. [ 29.454325] systemd[1]: Created slice System Slice. [ 29.454457] systemd[1]: Listening on fsck to fsckd communication Socket. [ 30.081158] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 30.445619] systemd-journald[260]: Received request to flush runtime journal from PID 1 [ 31.325726] lp: driver loaded but no devices found [ 31.391652] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS [ 31.421720] ppdev: user-space parallel port driver [ 31.564509] systemd-journald[260]: File /var/log/journal/0ec8bca803be45538757bb9ff6eee36f/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 44.224643] hp_accel: laptop model unknown, using default axes configuration [ 44.232990] input: HP Wireless hotkeys as /devices/virtual/input/input9 [ 44.475517] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 44.605045] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 44.608831] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 44.768953] snd_hda_intel 0000:00:01.1: Force to non-snoop mode [ 44.778238] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input11 [ 44.786679] snd_hda_codec_idt hdaudioC1D0: autoconfig for 92HD91BXX: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker [ 44.786683] snd_hda_codec_idt hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 44.786688] snd_hda_codec_idt hdaudioC1D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 44.786690] snd_hda_codec_idt hdaudioC1D0: mono: mono_out=0x0 [ 44.786692] snd_hda_codec_idt hdaudioC1D0: inputs: [ 44.786695] snd_hda_codec_idt hdaudioC1D0: Internal Mic=0x11 [ 44.786697] snd_hda_codec_idt hdaudioC1D0: Mic=0xa [ 44.823831] media: Linux media interface: v0.10 [ 44.838809] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input12 [ 44.838914] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input13 [ 44.845844] Linux video capture interface: v2.00 [ 44.868879] uvcvideo: Found UVC 1.00 device HP Truevision HD (064e:c336) [ 44.882060] uvcvideo 2-1:1.0: Entity type for entity Extension 4 was not initialized! [ 44.882063] uvcvideo 2-1:1.0: Entity type for entity Extension 3 was not initialized! [ 44.882066] uvcvideo 2-1:1.0: Entity type for entity Processing 2 was not initialized! [ 44.882068] uvcvideo 2-1:1.0: Entity type for entity Camera 1 was not initialized! [ 44.882194] input: HP Truevision HD: HP Truevision as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input14 [ 44.882321] usbcore: registered new interface driver uvcvideo [ 44.882322] USB Video Class driver (1.1.1) [ 44.902850] AVX version of gcm_enc/dec engaged. [ 44.902852] AES CTR mode by8 optimization enabled [ 44.961782] lis3lv02d: 8 bits 3DC sensor found [ 44.965938] kvm: Nested Virtualization enabled [ 44.965942] kvm: Nested Paging enabled [ 44.977932] MCE: In-kernel MCE decoding enabled. [ 44.981399] EDAC amd64: Node 0: DRAM ECC disabled. [ 44.981401] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 45.111057] ath: phy0: Enable LNA combining [ 45.112164] ath: phy0: ASPM enabled: 0x43 [ 45.112167] ath: EEPROM regdomain: 0x60 [ 45.112168] ath: EEPROM indicates we should expect a direct regpair map [ 45.112171] ath: Country alpha2 being used: 00 [ 45.112172] ath: Regpair used: 0x60 [ 45.130529] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 45.131406] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffa6bac2380000, irq=17 [ 45.145255] ath9k 0000:02:00.0 wlo1: renamed from wlan0 [ 45.421034] hp_wmi: query 0xd returned error 0x5 [ 45.421214] input: HP WMI hotkeys as /devices/virtual/input/input10 [ 45.760180] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input15 [ 48.577467] audit: type=1400 audit(1542749356.842:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=644 comm="apparmor_parser" [ 48.577475] audit: type=1400 audit(1542749356.842:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=644 comm="apparmor_parser" [ 48.577480] audit: type=1400 audit(1542749356.842:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=644 comm="apparmor_parser" [ 48.578686] audit: type=1400 audit(1542749356.842:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=641 comm="apparmor_parser" [ 48.578693] audit: type=1400 audit(1542749356.842:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=641 comm="apparmor_parser" [ 48.578697] audit: type=1400 audit(1542749356.842:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=641 comm="apparmor_parser" [ 48.578700] audit: type=1400 audit(1542749356.842:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=641 comm="apparmor_parser" [ 48.579482] audit: type=1400 audit(1542749356.842:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=645 comm="apparmor_parser" [ 48.579660] audit: type=1400 audit(1542749356.842:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=640 comm="apparmor_parser" [ 48.579665] audit: type=1400 audit(1542749356.842:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=640 comm="apparmor_parser" [ 54.928151] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 55.146479] r8169 0000:01:00.2 eno1: link down [ 55.146624] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 55.333408] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 55.348257] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 55.439763] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 56.545107] wlo1: authenticate with 1c:49:7b:7a:cc:a2 [ 56.559324] wlo1: send auth to 1c:49:7b:7a:cc:a2 (try 1/3) [ 56.561778] wlo1: authenticated [ 56.568046] wlo1: associate with 1c:49:7b:7a:cc:a2 (try 1/3) [ 56.574172] wlo1: RX AssocResp from 1c:49:7b:7a:cc:a2 (capab=0x1431 status=0 aid=3) [ 56.574277] wlo1: associated [ 56.574685] ath: EEPROM regdomain: 0x8348 [ 56.574686] ath: EEPROM indicates we should expect a country code [ 56.574688] ath: doing EEPROM country->regdmn map search [ 56.574690] ath: country maps to regdmn code: 0x3a [ 56.574692] ath: Country alpha2 being used: US [ 56.574693] ath: Regpair used: 0x3a [ 56.574696] ath: regdomain 0x8348 dynamically updated by country IE [ 56.584782] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 1c:49:7b:7a:cc:a2 [ 56.618942] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 59.980359] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 60.058315] Ebtables v2.0 registered [ 60.787425] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 60.788752] virbr0: port 1(virbr0-nic) entered blocking state [ 60.788757] virbr0: port 1(virbr0-nic) entered disabled state [ 60.788840] device virbr0-nic entered promiscuous mode [ 60.903473] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 61.331204] virbr0: port 1(virbr0-nic) entered blocking state [ 61.331213] virbr0: port 1(virbr0-nic) entered listening state [ 61.775170] virbr0: port 1(virbr0-nic) entered disabled state [ 78.157291] systemd-journald[260]: File /var/log/journal/0ec8bca803be45538757bb9ff6eee36f/user-1000.journal corrupted or uncleanly shut down, renaming and replacing. [ 294.310365] systemd: 38 output lines suppressed due to ratelimiting [ 294.317243] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 294.341420] systemd[1]: Detected architecture x86-64. [ 295.153609] systemd[1]: Stopping Journal Service... [ 295.154229] systemd-journald[260]: Received SIGTERM from PID 1 (systemd). [ 295.531695] systemd[1]: Stopped Journal Service. [ 295.534872] systemd[1]: Starting Journal Service... [ 295.614185] systemd[1]: Started Journal Service. [ 359.394581] wlo1: AP 1c:49:7b:7a:cc:a2 changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz) [ 557.546323] wlo1: AP 1c:49:7b:7a:cc:a2 changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz) [ 4382.421979] wlo1: deauthenticating from 1c:49:7b:7a:cc:a2 by local choice (Reason: 3=DEAUTH_LEAVING) [ 4383.310980] usb 3-1: USB disconnect, device number 2 [ 4384.202572] PM: suspend entry (deep) [ 4384.202575] PM: Syncing filesystems ... done. [ 4385.000009] Freezing user space processes ... (elapsed 0.003 seconds) done. [ 4385.003067] OOM killer disabled. [ 4385.003068] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 4385.004574] Suspending console(s) (use no_console_suspend to debug) [ 4385.028299] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 4385.028544] sd 0:0:0:0: [sda] Stopping disk [ 4387.146087] ACPI: EC: interrupt blocked [ 4387.164935] ACPI: Preparing to enter system sleep state S3 [ 4387.172513] ACPI: EC: event blocked [ 4387.172515] ACPI: EC: EC stopped [ 4387.172516] PM: Saving platform NVS memory [ 4387.172541] Disabling non-boot CPUs ... [ 4387.189031] IRQ 37: no longer affine to CPU1 [ 4387.190326] smpboot: CPU 1 is now offline [ 4387.213044] IRQ 36: no longer affine to CPU2 [ 4387.214072] smpboot: CPU 2 is now offline [ 4387.236886] IRQ 17: no longer affine to CPU3 [ 4387.236909] IRQ 33: no longer affine to CPU3 [ 4387.238056] smpboot: CPU 3 is now offline [ 4387.238787] ACPI: Low-level resume complete [ 4387.238851] ACPI: EC: EC started [ 4387.238852] PM: Restoring platform NVS memory [ 4387.238890] LVT offset 0 assigned for vector 0x400 [ 4387.239138] [Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0xf9, but the register is already in use for vector 0x400 on another cpu [ 4387.239140] [Firmware Bug]: cpu 0, failed to setup threshold interrupt for bank 4, block 0 (MSR00000413=0xc000000001000000) [ 4387.239141] [Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0xf9, but the register is already in use for vector 0x400 on another cpu [ 4387.239142] [Firmware Bug]: cpu 0, failed to setup threshold interrupt for bank 4, block 1 (MSRC0000408=0xc000000001000000) [ 4387.245598] microcode: CPU0: new patch_level=0x06001119 [ 4387.245679] Enabling non-boot CPUs ... [ 4387.245739] x86: Booting SMP configuration: [ 4387.245740] smpboot: Booting Node 0 Processor 1 APIC 0x11 [ 4387.248268] cache: parent cpu1 should not be sleeping [ 4387.248356] microcode: CPU1: patch_level=0x06001119 [ 4387.248532] CPU1 is up [ 4387.248573] smpboot: Booting Node 0 Processor 2 APIC 0x12 [ 4387.259198] cache: parent cpu2 should not be sleeping [ 4387.259305] microcode: CPU2: patch_level=0x06001119 [ 4387.259664] CPU2 is up [ 4387.259728] smpboot: Booting Node 0 Processor 3 APIC 0x13 [ 4387.262283] cache: parent cpu3 should not be sleeping [ 4387.262385] microcode: CPU3: patch_level=0x06001119 [ 4387.262767] CPU3 is up [ 4387.263563] ACPI: Waking up from system sleep state S3 [ 4387.267950] ACPI: EC: interrupt unblocked [ 4387.286387] ACPI: EC: event unblocked [ 4387.286855] usb usb5: root hub lost power or was reset [ 4387.286965] usb usb6: root hub lost power or was reset [ 4387.287171] usb usb7: root hub lost power or was reset [ 4387.287173] usb usb8: root hub lost power or was reset [ 4387.290885] ath: phy0: ASPM enabled: 0x43 [ 4387.312991] usb usb2: root hub lost power or was reset [ 4387.313440] sd 0:0:0:0: [sda] Starting disk [ 4387.469588] r8169 0000:01:00.2 eno1: link down [ 4387.472279] [drm] PCIE GART of 1024M enabled (table at 0x00000000001D6000). [ 4387.472458] radeon 0000:00:01.0: WB enabled [ 4387.472462] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x000000007fac1091 [ 4387.472867] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0x00000000df325933 [ 4387.492944] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0x00000000fca76256 [ 4387.492946] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0x0000000047d9a138 [ 4387.492948] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0x00000000f0950ef7 [ 4387.492950] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0x000000004e320a7b [ 4387.492952] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x000000009801b9df [ 4387.492954] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0x00000000518899e1 [ 4387.511111] [drm] ring test on 0 succeeded in 2 usecs [ 4387.511118] [drm] ring test on 3 succeeded in 3 usecs [ 4387.511124] [drm] ring test on 4 succeeded in 3 usecs [ 4387.556826] [drm] ring test on 5 succeeded in 1 usecs [ 4387.576697] [drm] UVD initialized successfully. [ 4387.685875] [drm] ring test on 6 succeeded in 10 usecs [ 4387.685885] [drm] ring test on 7 succeeded in 3 usecs [ 4387.685886] [drm] VCE initialized successfully. [ 4387.685991] [drm] ib test on ring 0 succeeded in 0 usecs [ 4387.686044] [drm] ib test on ring 3 succeeded in 0 usecs [ 4387.686107] [drm] ib test on ring 4 succeeded in 0 usecs [ 4387.792952] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 4387.857109] usb 4-3: reset full-speed USB device number 2 using ohci-pci [ 4387.996961] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4388.004072] ata2.00: configured for UDMA/133 [ 4388.225140] [drm] ib test on ring 5 succeeded [ 4388.313194] ACPI: button: The lid device is not compliant to SW_LID. [ 4388.769014] [drm] ib test on ring 6 succeeded [ 4389.281290] [drm] ib test on ring 7 succeeded [ 4389.497170] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4389.502876] ata1.00: configured for UDMA/100 [ 4389.765404] psmouse serio1: synaptics: queried max coordinates: x [..5684], y [..4862] [ 4389.893005] psmouse serio1: synaptics: queried min coordinates: x [1258..], y [992..] [ 4390.158325] OOM killer enabled. [ 4390.158326] Restarting tasks ... done. [ 4390.557493] PM: suspend exit [ 4390.733636] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 4390.855175] r8169 0000:01:00.2 eno1: link down [ 4390.855271] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 4390.856882] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 4390.882312] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 4390.938208] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 4392.057223] wlo1: authenticate with 5c:a9:33:01:4d:48 [ 4392.071316] wlo1: send auth to 5c:a9:33:01:4d:48 (try 1/3) [ 4392.075787] wlo1: authenticated [ 4392.077206] wlo1: associate with 5c:a9:33:01:4d:48 (try 1/3) [ 4392.093722] wlo1: RX AssocResp from 5c:a9:33:01:4d:48 (capab=0x1431 status=0 aid=2) [ 4392.093824] wlo1: associated [ 4392.093967] ath: EEPROM regdomain: 0x8348 [ 4392.093969] ath: EEPROM indicates we should expect a country code [ 4392.093971] ath: doing EEPROM country->regdmn map search [ 4392.093974] ath: country maps to regdmn code: 0x3a [ 4392.093976] ath: Country alpha2 being used: US [ 4392.093978] ath: Regpair used: 0x3a [ 4392.093980] ath: regdomain 0x8348 dynamically updated by country IE [ 4392.123106] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 4392.165198] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 5c:a9:33:01:4d:48 [ 4696.004087] wlo1: AP 5c:a9:33:01:4d:48 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz) [ 5610.365229] wlo1: deauthenticating from 5c:a9:33:01:4d:48 by local choice (Reason: 3=DEAUTH_LEAVING) [ 5610.428847] PM: suspend entry (deep) [ 5610.428851] PM: Syncing filesystems ... done. [ 5611.265179] Freezing user space processes ... (elapsed 0.003 seconds) done. [ 5611.268531] OOM killer disabled. [ 5611.268532] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5611.270274] Suspending console(s) (use no_console_suspend to debug) [ 5611.293523] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 5611.293693] sd 0:0:0:0: [sda] Stopping disk [ 5612.282819] ACPI: EC: interrupt blocked [ 5612.301832] ACPI: Preparing to enter system sleep state S3 [ 5612.424980] ACPI: EC: event blocked [ 5612.424982] ACPI: EC: EC stopped [ 5612.424983] PM: Saving platform NVS memory [ 5612.425009] Disabling non-boot CPUs ... [ 5612.438305] IRQ 37: no longer affine to CPU1 [ 5612.439588] smpboot: CPU 1 is now offline [ 5612.458091] IRQ 36: no longer affine to CPU2 [ 5612.459113] smpboot: CPU 2 is now offline [ 5612.482088] IRQ 17: no longer affine to CPU3 [ 5612.482105] IRQ 26: no longer affine to CPU3 [ 5612.482115] IRQ 29: no longer affine to CPU3 [ 5612.482125] IRQ 32: no longer affine to CPU3 [ 5612.482130] IRQ 33: no longer affine to CPU3 [ 5612.482260] IRQ 35: no longer affine to CPU3 [ 5612.483284] smpboot: CPU 3 is now offline [ 5612.483994] ACPI: Low-level resume complete [ 5612.484056] ACPI: EC: EC started [ 5612.484057] PM: Restoring platform NVS memory [ 5612.484095] LVT offset 0 assigned for vector 0x400 [ 5612.484346] [Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0xf9, but the register is already in use for vector 0x400 on another cpu [ 5612.484347] [Firmware Bug]: cpu 0, failed to setup threshold interrupt for bank 4, block 0 (MSR00000413=0xc000000001000000) [ 5612.484349] [Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0xf9, but the register is already in use for vector 0x400 on another cpu [ 5612.484350] [Firmware Bug]: cpu 0, failed to setup threshold interrupt for bank 4, block 1 (MSRC0000408=0xc000000001000000) [ 5612.490806] microcode: CPU0: new patch_level=0x06001119 [ 5612.490884] Enabling non-boot CPUs ... [ 5612.490949] x86: Booting SMP configuration: [ 5612.490950] smpboot: Booting Node 0 Processor 1 APIC 0x11 [ 5612.493465] cache: parent cpu1 should not be sleeping [ 5612.493556] microcode: CPU1: patch_level=0x06001119 [ 5612.493731] CPU1 is up [ 5612.493772] smpboot: Booting Node 0 Processor 2 APIC 0x12 [ 5612.504152] cache: parent cpu2 should not be sleeping [ 5612.504260] microcode: CPU2: patch_level=0x06001119 [ 5612.504615] CPU2 is up [ 5612.504685] smpboot: Booting Node 0 Processor 3 APIC 0x13 [ 5612.507315] cache: parent cpu3 should not be sleeping [ 5612.507428] microcode: CPU3: patch_level=0x06001119 [ 5612.507814] CPU3 is up [ 5612.508622] ACPI: Waking up from system sleep state S3 [ 5612.512963] ACPI: EC: interrupt unblocked [ 5612.531386] ACPI: EC: event unblocked [ 5612.531580] usb usb5: root hub lost power or was reset [ 5612.531582] usb usb6: root hub lost power or was reset [ 5612.533007] usb usb7: root hub lost power or was reset [ 5612.533011] usb usb8: root hub lost power or was reset [ 5612.535193] ath: phy0: ASPM enabled: 0x43 [ 5612.556338] sd 0:0:0:0: [sda] Starting disk [ 5612.561973] usb usb2: root hub lost power or was reset [ 5612.715204] r8169 0000:01:00.2 eno1: link down [ 5612.717202] [drm] PCIE GART of 1024M enabled (table at 0x00000000001D6000). [ 5612.717330] radeon 0000:00:01.0: WB enabled [ 5612.717335] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x000000007fac1091 [ 5612.717725] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0x00000000df325933 [ 5612.737824] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0x00000000fca76256 [ 5612.737826] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0x0000000047d9a138 [ 5612.737828] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0x00000000f0950ef7 [ 5612.737830] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0x000000004e320a7b [ 5612.737832] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x000000009801b9df [ 5612.737834] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0x00000000518899e1 [ 5612.756035] [drm] ring test on 0 succeeded in 2 usecs [ 5612.756041] [drm] ring test on 3 succeeded in 3 usecs [ 5612.756047] [drm] ring test on 4 succeeded in 3 usecs [ 5612.801774] [drm] ring test on 5 succeeded in 1 usecs [ 5612.821658] [drm] UVD initialized successfully. [ 5612.930915] [drm] ring test on 6 succeeded in 10 usecs [ 5612.930925] [drm] ring test on 7 succeeded in 3 usecs [ 5612.930925] [drm] VCE initialized successfully. [ 5612.931029] [drm] ib test on ring 0 succeeded in 0 usecs [ 5612.931082] [drm] ib test on ring 3 succeeded in 0 usecs [ 5612.931131] [drm] ib test on ring 4 succeeded in 0 usecs [ 5613.042194] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 5613.102212] usb 4-3: reset full-speed USB device number 2 using ohci-pci [ 5613.242180] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5613.249348] ata2.00: configured for UDMA/133 [ 5613.470249] [drm] ib test on ring 5 succeeded [ 5614.014233] [drm] ib test on ring 6 succeeded [ 5614.526388] [drm] ib test on ring 7 succeeded [ 5614.952332] psmouse serio1: synaptics: queried max coordinates: x [..5684], y [..4862] [ 5615.069581] psmouse serio1: synaptics: queried min coordinates: x [1258..], y [992..] [ 5615.370340] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5615.373811] ata1.00: configured for UDMA/100 [ 5615.404391] OOM killer enabled. [ 5615.404392] Restarting tasks ... done. [ 5615.806262] usb 3-1: new low-speed USB device number 3 using ohci-pci [ 5615.850619] PM: suspend exit [ 5615.946775] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 5615.999962] usb 3-1: New USB device found, idVendor=18f8, idProduct=0f99 [ 5615.999968] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 5615.999972] usb 3-1: Product: USB OPTICAL MOUSE [ 5616.007763] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:18F8:0F99.0003/input/input16 [ 5616.066558] hid-generic 0003:18F8:0F99.0003: input,hidraw0: USB HID v1.10 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:12.0-1/input0 [ 5616.068296] r8169 0000:01:00.2 eno1: link down [ 5616.068406] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 5616.070417] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 5616.073123] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/0003:18F8:0F99.0004/input/input17 [ 5616.089041] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 5616.133420] hid-generic 0003:18F8:0F99.0004: input,hiddev0,hidraw1: USB HID v1.10 Keyboard [USB OPTICAL MOUSE ] on usb-0000:00:12.0-1/input1 [ 5616.151437] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 5617.260007] wlo1: authenticate with 1c:49:7b:7a:cc:a2 [ 5617.274621] wlo1: send auth to 1c:49:7b:7a:cc:a2 (try 1/3) [ 5617.283070] wlo1: authenticated [ 5617.288469] wlo1: associate with 1c:49:7b:7a:cc:a2 (try 1/3) [ 5617.300874] wlo1: RX AssocResp from 1c:49:7b:7a:cc:a2 (capab=0x1431 status=0 aid=2) [ 5617.300978] wlo1: associated [ 5617.301119] ath: EEPROM regdomain: 0x8348 [ 5617.301120] ath: EEPROM indicates we should expect a country code [ 5617.301122] ath: doing EEPROM country->regdmn map search [ 5617.301123] ath: country maps to regdmn code: 0x3a [ 5617.301125] ath: Country alpha2 being used: US [ 5617.301126] ath: Regpair used: 0x3a [ 5617.301128] ath: regdomain 0x8348 dynamically updated by country IE [ 5617.322528] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 5617.386864] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 1c:49:7b:7a:cc:a2 [ 5795.673444] wlo1: AP 1c:49:7b:7a:cc:a2 changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz) [ 6022.395945] wlo1: AP 1c:49:7b:7a:cc:a2 changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz) [ 6221.680446] wlo1: AP 1c:49:7b:7a:cc:a2 changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz) [ 6531.214523] perf: interrupt took too long (2588 > 2500), lowering kernel.perf_event_max_sample_rate to 77250 [ 8803.725082] wlo1: AP 1c:49:7b:7a:cc:a2 changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz) [ 8920.671454] wlo1: AP 1c:49:7b:7a:cc:a2 changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz) [ 9186.207532] wlo1: AP 1c:49:7b:7a:cc:a2 changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz) [ 9272.331774] wlo1: AP 1c:49:7b:7a:cc:a2 changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz) [11110.598146] wlo1: AP 1c:49:7b:7a:cc:a2 changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz) [11321.654357] wlo1: AP 1c:49:7b:7a:cc:a2 changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz) [11470.243603] wlo1: AP 1c:49:7b:7a:cc:a2 changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz) [11622.416978] wlo1: AP 1c:49:7b:7a:cc:a2 changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz) [12870.218909] wlo1: AP 1c:49:7b:7a:cc:a2 changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz) [12932.481027] wlo1: AP 1c:49:7b:7a:cc:a2 changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz) [13286.903971] wlo1: AP 1c:49:7b:7a:cc:a2 changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz) [13287.313743] wlo1: AP 1c:49:7b:7a:cc:a2 changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz) [13879.899175] wlo1: deauthenticating from 1c:49:7b:7a:cc:a2 by local choice (Reason: 3=DEAUTH_LEAVING) [13881.494726] PM: suspend entry (deep) [13881.494734] PM: Syncing filesystems ... done. [13882.419897] Freezing user space processes ... (elapsed 0.003 seconds) done. [13882.423251] OOM killer disabled. [13882.423252] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [13882.425091] Suspending console(s) (use no_console_suspend to debug) [13882.448328] sd 0:0:0:0: [sda] Synchronizing SCSI cache [13882.448629] sd 0:0:0:0: [sda] Stopping disk [13883.659365] ACPI: EC: interrupt blocked [13883.677971] ACPI: Preparing to enter system sleep state S3 [13883.799917] ACPI: EC: event blocked [13883.799919] ACPI: EC: EC stopped [13883.799920] PM: Saving platform NVS memory [13883.799942] Disabling non-boot CPUs ... [13883.815395] smpboot: CPU 1 is now offline [13883.835266] smpboot: CPU 2 is now offline [13883.858066] IRQ 17: no longer affine to CPU3 [13883.858072] IRQ 18: no longer affine to CPU3 [13883.859132] smpboot: CPU 3 is now offline [13883.859818] ACPI: Low-level resume complete [13883.859880] ACPI: EC: EC started [13883.859880] PM: Restoring platform NVS memory [13883.859917] LVT offset 0 assigned for vector 0x400 [13883.860173] [Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0xf9, but the register is already in use for vector 0x400 on another cpu [13883.860174] [Firmware Bug]: cpu 0, failed to setup threshold interrupt for bank 4, block 0 (MSR00000413=0xc000000001000000) [13883.860176] [Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0xf9, but the register is already in use for vector 0x400 on another cpu [13883.860177] [Firmware Bug]: cpu 0, failed to setup threshold interrupt for bank 4, block 1 (MSRC0000408=0xc000000001000000) [13883.867836] microcode: CPU0: new patch_level=0x06001119 [13883.867891] Enabling non-boot CPUs ... [13883.867951] x86: Booting SMP configuration: [13883.867952] smpboot: Booting Node 0 Processor 1 APIC 0x11 [13883.870457] cache: parent cpu1 should not be sleeping [13883.870548] microcode: CPU1: patch_level=0x06001119 [13883.870726] CPU1 is up [13883.870767] smpboot: Booting Node 0 Processor 2 APIC 0x12 [13883.881057] cache: parent cpu2 should not be sleeping [13883.881162] microcode: CPU2: patch_level=0x06001119 [13883.881486] CPU2 is up [13883.881533] smpboot: Booting Node 0 Processor 3 APIC 0x13 [13883.884184] cache: parent cpu3 should not be sleeping [13883.884290] microcode: CPU3: patch_level=0x06001119 [13883.884661] CPU3 is up [13883.885519] ACPI: Waking up from system sleep state S3 [13883.889659] ACPI: EC: interrupt unblocked [13883.907379] ACPI: EC: event unblocked [13883.907726] usb usb5: root hub lost power or was reset [13883.907728] usb usb6: root hub lost power or was reset [13883.908999] usb usb7: root hub lost power or was reset [13883.909003] usb usb8: root hub lost power or was reset [13883.911340] ath: phy0: ASPM enabled: 0x43 [13883.933975] usb usb2: root hub lost power or was reset [13883.942471] sd 0:0:0:0: [sda] Starting disk [13884.090059] r8169 0000:01:00.2 eno1: link down [13884.092792] [drm] PCIE GART of 1024M enabled (table at 0x00000000001D6000). [13884.092973] radeon 0000:00:01.0: WB enabled [13884.092977] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x000000007fac1091 [13884.093361] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0x00000000df325933 [13884.113438] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0x00000000fca76256 [13884.113441] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0x0000000047d9a138 [13884.113443] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0x00000000f0950ef7 [13884.113445] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0x000000004e320a7b [13884.113447] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x000000009801b9df [13884.113449] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0x00000000518899e1 [13884.131669] [drm] ring test on 0 succeeded in 2 usecs [13884.131676] [drm] ring test on 3 succeeded in 3 usecs [13884.131682] [drm] ring test on 4 succeeded in 3 usecs [13884.177370] [drm] ring test on 5 succeeded in 1 usecs [13884.197230] [drm] UVD initialized successfully. [13884.306395] [drm] ring test on 6 succeeded in 10 usecs [13884.306405] [drm] ring test on 7 succeeded in 3 usecs [13884.306406] [drm] VCE initialized successfully. [13884.306466] [drm] ib test on ring 0 succeeded in 0 usecs [13884.306517] [drm] ib test on ring 3 succeeded in 0 usecs [13884.306610] [drm] ib test on ring 4 succeeded in 0 usecs [13884.406172] usb 2-1: reset high-speed USB device number 2 using ehci-pci [13884.470242] usb 4-3: reset full-speed USB device number 2 using ohci-pci [13884.618199] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [13884.625393] ata2.00: configured for UDMA/133 [13884.834503] [drm] ib test on ring 5 succeeded [13885.378089] [drm] ib test on ring 6 succeeded [13885.890213] [drm] ib test on ring 7 succeeded [13886.182371] psmouse serio1: synaptics: queried max coordinates: x [..5684], y [..4862] [13886.306211] psmouse serio1: synaptics: queried min coordinates: x [1258..], y [992..] [13886.771352] OOM killer enabled. [13886.771354] Restarting tasks ... done. [13886.790139] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [13886.793252] ata1.00: configured for UDMA/100 [13887.206359] PM: suspend exit [13887.324282] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [13887.430202] r8169 0000:01:00.2 eno1: link down [13887.430298] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [13887.432024] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [13887.450403] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [13887.506026] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [13888.637383] wlo1: authenticate with 1c:49:7b:7a:cc:a2 [13888.651545] wlo1: send auth to 1c:49:7b:7a:cc:a2 (try 1/3) [13888.658286] wlo1: authenticated [13888.662139] wlo1: associate with 1c:49:7b:7a:cc:a2 (try 1/3) [13888.669458] wlo1: RX AssocResp from 1c:49:7b:7a:cc:a2 (capab=0x1431 status=0 aid=3) [13888.669578] wlo1: associated [13888.669722] ath: EEPROM regdomain: 0x8348 [13888.669723] ath: EEPROM indicates we should expect a country code [13888.669725] ath: doing EEPROM country->regdmn map search [13888.669727] ath: country maps to regdmn code: 0x3a [13888.669728] ath: Country alpha2 being used: US [13888.669729] ath: Regpair used: 0x3a [13888.669731] ath: regdomain 0x8348 dynamically updated by country IE [13888.689318] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 1c:49:7b:7a:cc:a2 [13888.703389] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [21928.178028] wlo1: AP 1c:49:7b:7a:cc:a2 changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz) [22291.615200] wlo1: AP 1c:49:7b:7a:cc:a2 changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz) [22393.304292] wlo1: AP 1c:49:7b:7a:cc:a2 changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz) [22591.254439] wlo1: AP 1c:49:7b:7a:cc:a2 changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz) [22606.717740] wlo1: AP 1c:49:7b:7a:cc:a2 changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz) [23490.685145] wlo1: AP 1c:49:7b:7a:cc:a2 changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz) [34610.423559] wlo1: deauthenticating from 1c:49:7b:7a:cc:a2 by local choice (Reason: 3=DEAUTH_LEAVING) [34613.937511] wlo1: authenticate with a2:d7:95:65:aa:97 [34613.953267] wlo1: send auth to a2:d7:95:65:aa:97 (try 1/3) [34613.973783] wlo1: authenticated [34613.976112] wlo1: associate with a2:d7:95:65:aa:97 (try 1/3) [34614.010988] wlo1: RX AssocResp from a2:d7:95:65:aa:97 (capab=0x411 status=0 aid=1) [34614.011111] wlo1: associated [34614.011247] ath: EEPROM regdomain: 0x8348 [34614.011248] ath: EEPROM indicates we should expect a country code [34614.011249] ath: doing EEPROM country->regdmn map search [34614.011251] ath: country maps to regdmn code: 0x3a [34614.011252] ath: Country alpha2 being used: US [34614.011254] ath: Regpair used: 0x3a [34614.011256] ath: regdomain 0x8348 dynamically updated by country IE [34614.019529] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by a2:d7:95:65:aa:97 [35659.511606] wlo1: deauthenticating from a2:d7:95:65:aa:97 by local choice (Reason: 3=DEAUTH_LEAVING) [35729.423826] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [35730.505278] wlo1: authenticate with a2:d7:95:65:aa:97 [35730.522286] wlo1: send auth to a2:d7:95:65:aa:97 (try 1/3) [35730.524275] wlo1: authenticated [35730.528774] wlo1: associate with a2:d7:95:65:aa:97 (try 1/3) [35730.538391] wlo1: RX AssocResp from a2:d7:95:65:aa:97 (capab=0x411 status=0 aid=1) [35730.538505] wlo1: associated [35730.538646] ath: EEPROM regdomain: 0x8348 [35730.538647] ath: EEPROM indicates we should expect a country code [35730.538649] ath: doing EEPROM country->regdmn map search [35730.538650] ath: country maps to regdmn code: 0x3a [35730.538652] ath: Country alpha2 being used: US [35730.538653] ath: Regpair used: 0x3a [35730.538655] ath: regdomain 0x8348 dynamically updated by country IE [35730.562508] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [35730.632469] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by a2:d7:95:65:aa:97 [35732.877392] wlo1: deauthenticating from a2:d7:95:65:aa:97 by local choice (Reason: 3=DEAUTH_LEAVING) [35735.540214] wlo1: authenticate with 1c:49:7b:7a:cc:a2 [35735.554452] wlo1: send auth to 1c:49:7b:7a:cc:a2 (try 1/3) [35735.556876] wlo1: authenticated [35735.561047] wlo1: associate with 1c:49:7b:7a:cc:a2 (try 1/3) [35735.566248] wlo1: RX AssocResp from 1c:49:7b:7a:cc:a2 (capab=0x1431 status=0 aid=2) [35735.566364] wlo1: associated [35735.566543] ath: EEPROM regdomain: 0x8348 [35735.566544] ath: EEPROM indicates we should expect a country code [35735.566546] ath: doing EEPROM country->regdmn map search [35735.566548] ath: country maps to regdmn code: 0x3a [35735.566549] ath: Country alpha2 being used: US [35735.566551] ath: Regpair used: 0x3a [35735.566552] ath: regdomain 0x8348 dynamically updated by country IE [35735.650338] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 1c:49:7b:7a:cc:a2 [40398.453472] wlo1: deauthenticating from 1c:49:7b:7a:cc:a2 by local choice (Reason: 3=DEAUTH_LEAVING) [40409.785290] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [40409.843880] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [40412.681133] wlo1: authenticate with a2:d7:95:65:aa:97 [40412.695326] wlo1: send auth to a2:d7:95:65:aa:97 (try 1/3) [40412.722829] wlo1: authenticated [40412.725648] wlo1: associate with a2:d7:95:65:aa:97 (try 1/3) [40412.735974] wlo1: RX AssocResp from a2:d7:95:65:aa:97 (capab=0x411 status=0 aid=1) [40412.736086] wlo1: associated [40412.736237] ath: EEPROM regdomain: 0x8348 [40412.736238] ath: EEPROM indicates we should expect a country code [40412.736240] ath: doing EEPROM country->regdmn map search [40412.736242] ath: country maps to regdmn code: 0x3a [40412.736243] ath: Country alpha2 being used: US [40412.736244] ath: Regpair used: 0x3a [40412.736247] ath: regdomain 0x8348 dynamically updated by country IE [40412.771368] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [40412.789709] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by a2:d7:95:65:aa:97 [40934.408219] wlo1: deauthenticating from a2:d7:95:65:aa:97 by local choice (Reason: 3=DEAUTH_LEAVING) [40936.734719] wlo1: authenticate with 5c:a9:33:01:4d:48 [40936.748971] wlo1: send auth to 5c:a9:33:01:4d:48 (try 1/3) [40936.754060] wlo1: authenticated [40936.759212] wlo1: associate with 5c:a9:33:01:4d:48 (try 1/3) [40936.766913] wlo1: RX AssocResp from 5c:a9:33:01:4d:48 (capab=0x1431 status=0 aid=2) [40936.767016] wlo1: associated [40936.767206] ath: EEPROM regdomain: 0x8348 [40936.767207] ath: EEPROM indicates we should expect a country code [40936.767209] ath: doing EEPROM country->regdmn map search [40936.767211] ath: country maps to regdmn code: 0x3a [40936.767212] ath: Country alpha2 being used: US [40936.767213] ath: Regpair used: 0x3a [40936.767214] ath: regdomain 0x8348 dynamically updated by country IE [40936.781447] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 5c:a9:33:01:4d:48 [40941.804952] kauditd_printk_skb: 21 callbacks suppressed [40941.804955] audit: type=1400 audit(1542792527.622:33): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=31429 comm="cupsd" capability=12 capname="net_admin" [40941.812254] audit: type=1400 audit(1542792527.630:34): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=31429 comm="cupsd" capability=12 capname="net_admin" [40947.264735] audit: type=1400 audit(1542792533.082:35): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=31429 comm="cupsd" capability=12 capname="net_admin" [40947.266696] audit: type=1400 audit(1542792533.082:36): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=31429 comm="cupsd" capability=12 capname="net_admin" [41239.901116] wlo1: AP 5c:a9:33:01:4d:48 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz) [41272.048640] wlo1: deauthenticating from 5c:a9:33:01:4d:48 by local choice (Reason: 3=DEAUTH_LEAVING) [41275.699798] wlo1: authenticate with a2:d7:95:65:aa:97 [41275.722567] wlo1: send auth to a2:d7:95:65:aa:97 (try 1/3) [41275.724541] wlo1: authenticated [41275.725665] wlo1: associate with a2:d7:95:65:aa:97 (try 1/3) [41275.734140] wlo1: RX AssocResp from a2:d7:95:65:aa:97 (capab=0x411 status=0 aid=1) [41275.734257] wlo1: associated [41275.734386] ath: EEPROM regdomain: 0x8348 [41275.734388] ath: EEPROM indicates we should expect a country code [41275.734389] ath: doing EEPROM country->regdmn map search [41275.734390] ath: country maps to regdmn code: 0x3a [41275.734392] ath: Country alpha2 being used: US [41275.734393] ath: Regpair used: 0x3a [41275.734394] ath: regdomain 0x8348 dynamically updated by country IE [41275.824174] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by a2:d7:95:65:aa:97