[   21.430691] r8169 0000:04:00.0 eth0: link down
[   21.430712] r8169 0000:04:00.0 eth0: link down
[   21.430720] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.430942] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.738463] vboxdrv: Found 4 processor cores.
[   21.738704] vboxdrv: fAsync=0 offMin=0x26a offMax=0x1998
[   21.738797] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   21.738799] vboxdrv: Successfully loaded version 4.2.16_Ubuntu (interface 0x001a0005).
[   21.763246] vboxpci: IOMMU not found (not registered)
[   23.037695] r8169 0000:04:00.0 eth0: link up
[   23.037709] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  149.999818] audit_printk_skb: 198 callbacks suppressed
[  149.999823] type=1400 audit(1385352239.437:78): apparmor="DENIED" operation="capable" parent=1610 profile="/usr/lib/telepathy/telepathy-*" pid=2586 comm="telepathy-haze" pid=2586 comm="telepathy-haze" capability=19  capname="sys_ptrace"
[  149.999830] type=1400 audit(1385352239.437:79): apparmor="DENIED" operation="ptrace" parent=1610 profile="/usr/lib/telepathy/telepathy-*" pid=2586 comm="telepathy-haze" target=642240330188FFFF642240330188FFFF10C440330188FFFF10C440330188FFFF20C440330188FFFF20C440330188FFFF8807
[  686.692656] perf samples too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[  943.360758] init: anacron main process (888) killed by TERM signal
[  943.857658] PM: Syncing filesystems ... done.
[  944.252717] PM: Preparing system for mem sleep
[  944.252900] Freezing user space processes ... (elapsed 0.001 seconds) done.
[  944.254354] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  944.255569] PM: Entering mem sleep
[  944.255629] Suspending console(s) (use no_console_suspend to debug)
[  944.255855] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  944.269338] mei_me 0000:00:16.0: suspend
[  944.315260] sd 0:0:0:0: [sda] Stopping disk
[  945.333216] PM: suspend of devices complete after 1077.636 msecs
[  945.333363] PM: late suspend of devices complete after 0.145 msecs
[  945.333558] r8169 0000:04:00.0: System wakeup enabled by ACPI
[  945.349250] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[  945.397090] PM: noirq suspend of devices complete after 63.734 msecs
[  945.397242] ACPI: Preparing to enter system sleep state S3
[  945.398624] PM: Saving platform NVS memory
[  945.399175] Disabling non-boot CPUs ...
[  945.501100] smpboot: CPU 1 is now offline
[  945.605122] smpboot: CPU 2 is now offline
[  945.605723] Broke affinity for irq 16
[  945.605752] Broke affinity for irq 23
[  945.605754] Broke affinity for irq 40
[  945.709039] smpboot: CPU 3 is now offline
[  945.710129] ACPI: Low-level resume complete
[  945.710187] PM: Restoring platform NVS memory
[  945.710725] CPU0: Thermal monitoring handled by SMI
[  945.710817] Enabling non-boot CPUs ...
[  945.710862] smpboot: Booting Node 0 Processor 1 APIC 0x4
[  945.721920] CPU1: Thermal monitoring handled by SMI
[  945.724369] CPU1 is up
[  945.724388] smpboot: Booting Node 0 Processor 2 APIC 0x1
[  945.735448] CPU2: Thermal monitoring handled by SMI
[  945.737896] CPU2 is up
[  945.737916] smpboot: Booting Node 0 Processor 3 APIC 0x5
[  945.748974] CPU3: Thermal monitoring handled by SMI
[  945.751438] CPU3 is up
[  945.753898] ACPI: Waking up from system sleep state S3
[  945.842374] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[  945.890481] PM: noirq resume of devices complete after 126.523 msecs
[  945.890622] PM: early resume of devices complete after 0.109 msecs
[  945.890655] i915 0000:00:02.0: setting latency timer to 64
[  945.890676] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[  945.890818] ehci-pci 0000:00:1a.0: setting latency timer to 64
[  945.890840] pci 0000:00:1e.0: setting latency timer to 64
[  945.890851] ahci 0000:00:1f.2: setting latency timer to 64
[  945.891090] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[  945.891092] r8169 0000:04:00.0: System wakeup disabled by ACPI
[  945.893087] ehci-pci 0000:00:1d.0: setting latency timer to 64
[  946.102454] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
[  946.210319] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  946.214156] ata2.00: configured for UDMA/100
[  946.218302] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[  946.253258] uvcvideo: Failed to set UVC commit control : -71 (exp. 26).
[  946.253264] uvcvideo 1-1.4:1.1: reset_resume error -5
[  948.841895] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  948.862030] ata1.00: configured for UDMA/133
[  948.877914] sd 0:0:0:0: [sda] Starting disk
[  948.889949] PM: resume of devices complete after 2999.803 msecs
[  948.890118] PM: Finishing wakeup.
[  948.890119] Restarting tasks ... done.
[  948.920400] video LNXVIDEO:00: Restoring backlight state
[  948.965893] usb 1-1.1: new full-speed USB device number 5 using ehci-pci
[  949.053914] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
[  949.178216] usb 1-1.4: device firmware changed
[  949.178460] usb 1-1.4: USB disconnect, device number 3
[  949.441804] usb 1-1.4: new high-speed USB device number 6 using ehci-pci
[  949.569244] usb 1-1.4: unable to read config index 0 descriptor/all
[  949.569254] usb 1-1.4: can't read configurations, error -71
[  949.653861] usb 1-1.5: new high-speed USB device number 8 using ehci-pci
[  949.756956] usb 1-1.5: New USB device found, idVendor=0bda, idProduct=0158
[  949.756964] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  949.756968] usb 1-1.5: Product: USB2.0-CRW
[  949.756972] usb 1-1.5: Manufacturer: Generic
[  949.756975] usb 1-1.5: SerialNumber: 20071114173400000
[  949.761977] ums-realtek 1-1.5:1.0: USB Mass Storage device detected
[  949.776496] scsi5 : usb-storage 1-1.5:1.0
[  949.918924] r8169 0000:04:00.0 eth0: link down
[  949.918936] r8169 0000:04:00.0 eth0: link down
[  949.919005] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  950.101832] usb 1-1.4: new high-speed USB device number 9 using ehci-pci
[  950.233955] usb 1-1.4: unable to read config index 0 descriptor/all
[  950.233965] usb 1-1.4: can't read configurations, error -71
[  950.254438] usb 1-1.5: USB disconnect, device number 8
[  950.581881] usb 1-1.4: new high-speed USB device number 11 using ehci-pci
[  950.711003] usb 1-1.4: unable to read config index 0 descriptor/all
[  950.711013] usb 1-1.4: can't read configurations, error -71
[  950.785823] usb 1-1.4: new high-speed USB device number 12 using ehci-pci
[  950.907928] usb 1-1.4: unable to read config index 0 descriptor/all
[  950.907939] usb 1-1.4: can't read configurations, error -71
[  951.125679] usb 1-1.4: new high-speed USB device number 14 using ehci-pci
[  951.245557] usb 1-1.4: unable to read config index 0 descriptor/all
[  951.245568] usb 1-1.4: can't read configurations, error -71
[  951.489547] usb 1-1.4: new high-speed USB device number 16 using ehci-pci
[  951.605433] usb 1-1.4: unable to read config index 0 descriptor/all
[  951.605443] usb 1-1.4: can't read configurations, error -71
[  951.681633] usb 1-1.4: new high-speed USB device number 17 using ehci-pci
[  951.798748] usb 1-1.4: unable to read config index 0 descriptor/all
[  951.798759] usb 1-1.4: can't read configurations, error -71
[  952.017496] usb 1-1.4: new high-speed USB device number 19 using ehci-pci
[  952.150243] usb 1-1.4: New USB device found, idVendor=0c45, idProduct=6461
[  952.150251] usb 1-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[  952.150255] usb 1-1.4: Product: Laptop_Integrated_Webcam_1.3M
[  952.150259] usb 1-1.4: Manufacturer: M091S-M01-9C26-SA8Z9
[  952.152930] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (0c45:6461)
[  952.301294] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input13
[  960.256365] usb 1-1.4: USB disconnect, device number 19
[  960.688173] usb 1-1.4: new high-speed USB device number 21 using ehci-pci
[  960.820850] usb 1-1.4: New USB device found, idVendor=0c45, idProduct=6461
[  960.820858] usb 1-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[  960.820862] usb 1-1.4: Product: Laptop_Integrated_Webcam_1.3M
[  960.820866] usb 1-1.4: Manufacturer: M091S-M01-9C26-SA8Z9
[  960.823608] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (0c45:6461)
[  960.971676] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input14
[  967.403517] usb 1-1.4: USB disconnect, device number 21
[  967.662956] usb 1-1.4: new high-speed USB device number 23 using ehci-pci
[  967.795686] usb 1-1.4: New USB device found, idVendor=0c45, idProduct=6461
[  967.795694] usb 1-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[  967.795698] usb 1-1.4: Product: Laptop_Integrated_Webcam_1.3M
[  967.795702] usb 1-1.4: Manufacturer: M091S-M01-9C26-SA8Z9
[  967.798424] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (0c45:6461)
[  967.860276] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[  967.864532] uvcvideo: Failed to query (129) UVC probe control : -71 (exp. 26).
[  967.864538] uvcvideo: Failed to initialize the device (-5).
[  967.865129] usb 1-1.4: USB disconnect, device number 23
[  968.790924] usb 1-1.4: new high-speed USB device number 26 using ehci-pci
[  968.923529] usb 1-1.4: New USB device found, idVendor=0c45, idProduct=6461
[  968.923539] usb 1-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[  968.923545] usb 1-1.4: Product: Laptop_Integrated_Webcam_1.3M
[  968.923551] usb 1-1.4: Manufacturer: M091S-M01-9C26-SA8Z9
[  968.926240] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (0c45:6461)
[  969.074484] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input15
[  978.157903] usb 1-1.4: USB disconnect, device number 26
[  978.941197] usb 1-1.4: new high-speed USB device number 31 using ehci-pci
[  979.074008] usb 1-1.4: New USB device found, idVendor=0c45, idProduct=6461
[  979.074019] usb 1-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[  979.074025] usb 1-1.4: Product: Laptop_Integrated_Webcam_1.3M
[  979.074030] usb 1-1.4: Manufacturer: M091S-M01-9C26-SA8Z9
[  979.076909] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (0c45:6461)
[  979.224940] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input16
[ 1016.907217] r8169 0000:04:00.0 eth0: link down
[ 1018.412700] r8169 0000:04:00.0 eth0: link up
[ 1018.412719] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1020.376756] type=1400 audit(1385356713.954:80): apparmor="DENIED" operation="capable" parent=1610 profile="/usr/lib/telepathy/telepathy-*" pid=4042 comm="telepathy-haze" pid=4042 comm="telepathy-haze" capability=19  capname="sys_ptrace"
[ 1020.376774] type=1400 audit(1385356713.954:81): apparmor="DENIED" operation="ptrace" parent=1610 profile="/usr/lib/telepathy/telepathy-*" pid=4042 comm="telepathy-haze" target=642240330188FFFF642240330188FFFF10C440330188FFFF10C440330188FFFF20C440330188FFFF20C440330188FFFFB108
[ 2750.629370] perf samples too long (5006 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[ 7945.932969] usb 1-1.4: USB disconnect, device number 31
[ 7946.413080] usb 1-1.4: new high-speed USB device number 33 using ehci-pci
[ 7946.545878] usb 1-1.4: New USB device found, idVendor=0c45, idProduct=6461
[ 7946.545885] usb 1-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 7946.545890] usb 1-1.4: Product: Laptop_Integrated_Webcam_1.3M
[ 7946.545893] usb 1-1.4: Manufacturer: M091S-M01-9C26-SA8Z9
[ 7946.548657] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (0c45:6461)
[ 7946.697079] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input17
[ 7948.999827] PM: Syncing filesystems ... done.
[ 7949.166841] PM: Preparing system for mem sleep
[ 7949.167014] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 7949.168503] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 7949.169805] PM: Entering mem sleep
[ 7949.169859] Suspending console(s) (use no_console_suspend to debug)
[ 7949.170091] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 7949.170160] sd 0:0:0:0: [sda] Stopping disk
[ 7949.183657] mei_me 0000:00:16.0: suspend
[ 7950.210217] PM: suspend of devices complete after 1039.879 msecs
[ 7950.210363] PM: late suspend of devices complete after 0.143 msecs
[ 7950.210565] r8169 0000:04:00.0: System wakeup enabled by ACPI
[ 7950.226297] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 7950.274154] PM: noirq suspend of devices complete after 63.765 msecs
[ 7950.274336] ACPI: Preparing to enter system sleep state S3
[ 7950.275942] PM: Saving platform NVS memory
[ 7950.276511] Disabling non-boot CPUs ...
[ 7950.378147] smpboot: CPU 1 is now offline
[ 7950.482181] smpboot: CPU 2 is now offline
[ 7950.482754] Broke affinity for irq 16
[ 7950.482783] Broke affinity for irq 23
[ 7950.482785] Broke affinity for irq 40
[ 7950.586215] smpboot: CPU 3 is now offline
[ 7950.587337] ACPI: Low-level resume complete
[ 7950.587394] PM: Restoring platform NVS memory
[ 7950.587932] CPU0: Thermal monitoring handled by SMI
[ 7950.587966] Enabling non-boot CPUs ...
[ 7950.588012] smpboot: Booting Node 0 Processor 1 APIC 0x4
[ 7950.599071] CPU1: Thermal monitoring handled by SMI
[ 7950.601600] CPU1 is up
[ 7950.601620] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 7950.612680] CPU2: Thermal monitoring handled by SMI
[ 7950.615122] CPU2 is up
[ 7950.615142] smpboot: Booting Node 0 Processor 3 APIC 0x5
[ 7950.626200] CPU3: Thermal monitoring handled by SMI
[ 7950.628664] CPU3 is up
[ 7950.631137] ACPI: Waking up from system sleep state S3
[ 7950.719618] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 7950.767771] PM: noirq resume of devices complete after 126.340 msecs
[ 7950.767910] PM: early resume of devices complete after 0.107 msecs
[ 7950.767943] i915 0000:00:02.0: setting latency timer to 64
[ 7950.767964] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[ 7950.768083] pci 0000:00:1e.0: setting latency timer to 64
[ 7950.768103] ahci 0000:00:1f.2: setting latency timer to 64
[ 7950.768104] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 7950.768267] r8169 0000:04:00.0: System wakeup disabled by ACPI
[ 7950.770198] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 7950.770350] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 7950.979797] usb 1-1.4: reset high-speed USB device number 33 using ehci-pci
[ 7951.095745] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7951.099445] ata2.00: configured for UDMA/100
[ 7951.163804] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 7953.720632] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7953.740610] ata1.00: configured for UDMA/133
[ 7953.756718] sd 0:0:0:0: [sda] Starting disk
[ 7953.764073] PM: resume of devices complete after 2995.139 msecs
[ 7953.764272] PM: Finishing wakeup.
[ 7953.764273] Restarting tasks ... done.
[ 7953.811215] video LNXVIDEO:00: Restoring backlight state
[ 7953.840727] usb 1-1.1: new full-speed USB device number 34 using ehci-pci
[ 7953.928815] usb 1-1.5: new high-speed USB device number 35 using ehci-pci
[ 7954.032122] usb 1-1.5: New USB device found, idVendor=0bda, idProduct=0158
[ 7954.032130] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7954.032134] usb 1-1.5: Product: USB2.0-CRW
[ 7954.032137] usb 1-1.5: Manufacturer: Generic
[ 7954.032141] usb 1-1.5: SerialNumber: 20071114173400000
[ 7954.037304] ums-realtek 1-1.5:1.0: USB Mass Storage device detected
[ 7954.051870] scsi6 : usb-storage 1-1.5:1.0
[ 7954.181251] usb 1-1.5: USB disconnect, device number 35
[ 7954.826138] r8169 0000:04:00.0 eth0: link down
[ 7954.826153] r8169 0000:04:00.0 eth0: link down
[ 7954.826364] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7956.408200] r8169 0000:04:00.0 eth0: link up
[ 7956.408216] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 7963.264243] type=1400 audit(1385364897.949:82): apparmor="DENIED" operation="capable" parent=1610 profile="/usr/lib/telepathy/telepathy-*" pid=6136 comm="telepathy-haze" pid=6136 comm="telepathy-haze" capability=19  capname="sys_ptrace"
[ 7963.264253] type=1400 audit(1385364897.949:83): apparmor="DENIED" operation="ptrace" parent=1610 profile="/usr/lib/telepathy/telepathy-*" pid=6136 comm="telepathy-haze" target=642240330188FFFF642240330188FFFF10C440330188FFFF10C440330188FFFF20C440330188FFFF20C440330188FFFF7B09
[ 9694.266979] PM: Syncing filesystems ... done.
[ 9694.408946] PM: Preparing system for mem sleep
[ 9694.409122] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 9694.410624] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 9694.411916] PM: Entering mem sleep
[ 9694.411974] Suspending console(s) (use no_console_suspend to debug)
[ 9694.412223] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 9694.412296] sd 0:0:0:0: [sda] Stopping disk
[ 9694.426334] mei_me 0000:00:16.0: suspend
[ 9695.880708] PM: suspend of devices complete after 1468.104 msecs
[ 9695.880846] PM: late suspend of devices complete after 0.135 msecs
[ 9695.881063] r8169 0000:04:00.0: System wakeup enabled by ACPI
[ 9695.896755] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 9695.944609] PM: noirq suspend of devices complete after 63.738 msecs
[ 9695.944795] ACPI: Preparing to enter system sleep state S3
[ 9695.946240] PM: Saving platform NVS memory
[ 9695.946824] Disabling non-boot CPUs ...
[ 9696.048607] smpboot: CPU 1 is now offline
[ 9696.152642] smpboot: CPU 2 is now offline
[ 9696.153229] Broke affinity for irq 23
[ 9696.153231] Broke affinity for irq 40
[ 9696.256671] smpboot: CPU 3 is now offline
[ 9696.257800] ACPI: Low-level resume complete
[ 9696.257857] PM: Restoring platform NVS memory
[ 9696.258395] CPU0: Thermal monitoring handled by SMI
[ 9696.258487] Enabling non-boot CPUs ...
[ 9696.258530] smpboot: Booting Node 0 Processor 1 APIC 0x4
[ 9696.269589] CPU1: Thermal monitoring handled by SMI
[ 9696.272046] CPU1 is up
[ 9696.272066] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 9696.283126] CPU2: Thermal monitoring handled by SMI
[ 9696.285571] CPU2 is up
[ 9696.285590] smpboot: Booting Node 0 Processor 3 APIC 0x5
[ 9696.296648] CPU3: Thermal monitoring handled by SMI
[ 9696.299119] CPU3 is up
[ 9696.301589] ACPI: Waking up from system sleep state S3
[ 9696.394091] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 9696.442227] PM: noirq resume of devices complete after 126.645 msecs
[ 9696.442369] PM: early resume of devices complete after 0.111 msecs
[ 9696.442405] i915 0000:00:02.0: setting latency timer to 64
[ 9696.442426] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[ 9696.442512] pci 0000:00:1e.0: setting latency timer to 64
[ 9696.442528] ahci 0000:00:1f.2: setting latency timer to 64
[ 9696.442634] r8169 0000:04:00.0: System wakeup disabled by ACPI
[ 9696.444621] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 9696.444691] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 9696.444821] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 9696.654332] usb 1-1.4: reset high-speed USB device number 33 using ehci-pci
[ 9696.770199] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9696.773974] ata2.00: configured for UDMA/100
[ 9696.814249] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 9696.867752] uvcvideo: Failed to set UVC commit control : -71 (exp. 26).
[ 9696.867758] uvcvideo 1-1.4:1.1: reset_resume error -5
[ 9699.395089] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9699.415048] ata1.00: configured for UDMA/133
[ 9699.431184] sd 0:0:0:0: [sda] Starting disk
[ 9699.439375] PM: resume of devices complete after 2995.984 msecs
[ 9699.439566] PM: Finishing wakeup.
[ 9699.439567] Restarting tasks ... done.
[ 9699.471298] video LNXVIDEO:00: Restoring backlight state
[ 9699.511373] usb 1-1.1: new full-speed USB device number 36 using ehci-pci
[ 9699.599289] usb 1-1.4: reset high-speed USB device number 33 using ehci-pci
[ 9699.720674] usb 1-1.4: device firmware changed
[ 9699.720935] usb 1-1.4: USB disconnect, device number 33
[ 9699.963458] usb 1-1.5: new high-speed USB device number 38 using ehci-pci
[ 9700.066324] usb 1-1.5: New USB device found, idVendor=0bda, idProduct=0158
[ 9700.066329] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9700.066331] usb 1-1.5: Product: USB2.0-CRW
[ 9700.066333] usb 1-1.5: Manufacturer: Generic
[ 9700.066335] usb 1-1.5: SerialNumber: 20071114173400000
[ 9700.071303] ums-realtek 1-1.5:1.0: USB Mass Storage device detected
[ 9700.085933] scsi7 : usb-storage 1-1.5:1.0
[ 9700.411422] usb 1-1.4: new high-speed USB device number 39 using ehci-pci
[ 9700.496599] r8169 0000:04:00.0 eth0: link down
[ 9700.496614] r8169 0000:04:00.0 eth0: link down
[ 9700.496728] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9700.529959] usb 1-1.4: unable to read config index 0 descriptor/all
[ 9700.529968] usb 1-1.4: can't read configurations, error -32
[ 9700.548623] usb 1-1.5: USB disconnect, device number 38
[ 9700.875774] usb 1-1.4: new high-speed USB device number 41 using ehci-pci
[ 9701.131878] usb 1-1.4: new high-speed USB device number 42 using ehci-pci
[ 9701.264651] usb 1-1.4: New USB device found, idVendor=0c45, idProduct=6461
[ 9701.264659] usb 1-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 9701.264663] usb 1-1.4: Product: Laptop_Integrated_Webcam_1.3M
[ 9701.264667] usb 1-1.4: Manufacturer: M091S-M01-9C26-SA8Z9
[ 9701.267339] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (0c45:6461)
[ 9701.415562] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input18
[ 9702.059741] r8169 0000:04:00.0 eth0: link up
[ 9702.059757] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 9703.993918] type=1400 audit(1385370670.009:84): apparmor="DENIED" operation="ptrace" parent=1610 profile="/usr/lib/telepathy/telepathy-*" pid=6948 comm="telepathy-haze" target=642240330188FFFF642240330188FFFF10C440330188FFFF10C440330188FFFF20C440330188FFFF20C440330188FFFFF80B
[10218.093603] systemd-hostnamed[7194]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[11051.118231] PM: Syncing filesystems ... done.
[11051.345804] PM: Preparing system for mem sleep
[11051.345985] Freezing user space processes ... (elapsed 0.001 seconds) done.
[11051.347478] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[11051.348759] PM: Entering mem sleep
[11051.348808] Suspending console(s) (use no_console_suspend to debug)
[11051.349055] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[11051.361940] sd 0:0:0:0: [sda] Stopping disk
[11051.365217] mei_me 0000:00:16.0: suspend
[11052.506937] PM: suspend of devices complete after 1157.609 msecs
[11052.507074] PM: late suspend of devices complete after 0.134 msecs
[11052.507270] r8169 0000:04:00.0: System wakeup enabled by ACPI
[11052.523011] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[11052.570870] PM: noirq suspend of devices complete after 63.770 msecs
[11052.571052] ACPI: Preparing to enter system sleep state S3
[11052.572472] PM: Saving platform NVS memory
[11052.573054] Disabling non-boot CPUs ...
[11052.674858] smpboot: CPU 1 is now offline
[11052.778893] smpboot: CPU 2 is now offline
[11052.882937] smpboot: CPU 3 is now offline
[11052.884062] ACPI: Low-level resume complete
[11052.884120] PM: Restoring platform NVS memory
[11052.884656] CPU0: Thermal monitoring handled by SMI
[11052.884731] Enabling non-boot CPUs ...
[11052.884776] smpboot: Booting Node 0 Processor 1 APIC 0x4
[11052.895835] CPU1: Thermal monitoring handled by SMI
[11052.898290] CPU1 is up
[11052.898309] smpboot: Booting Node 0 Processor 2 APIC 0x1
[11052.909370] CPU2: Thermal monitoring handled by SMI
[11052.911813] CPU2 is up
[11052.911834] smpboot: Booting Node 0 Processor 3 APIC 0x5
[11052.922892] CPU3: Thermal monitoring handled by SMI
[11052.925366] CPU3 is up
[11052.927849] ACPI: Waking up from system sleep state S3
[11053.016335] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[11053.064485] PM: noirq resume of devices complete after 126.039 msecs
[11053.064622] PM: early resume of devices complete after 0.105 msecs
[11053.064659] i915 0000:00:02.0: setting latency timer to 64
[11053.064681] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[11053.065602] ehci-pci 0000:00:1a.0: setting latency timer to 64
[11053.065763] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[11053.068301] pci 0000:00:1e.0: setting latency timer to 64
[11053.068311] ahci 0000:00:1f.2: setting latency timer to 64
[11053.068443] ehci-pci 0000:00:1d.0: setting latency timer to 64
[11053.068449] r8169 0000:04:00.0: System wakeup disabled by ACPI
[11053.280540] usb 1-1.4: reset high-speed USB device number 42 using ehci-pci
[11053.396586] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[11053.400752] ata2.00: configured for UDMA/100
[11053.428509] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[11056.021349] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[11056.041340] ata1.00: configured for UDMA/133
[11056.057487] sd 0:0:0:0: [sda] Starting disk
[11056.065966] PM: resume of devices complete after 3000.320 msecs
[11056.066154] PM: Finishing wakeup.
[11056.066156] Restarting tasks ... done.
[11056.105620] video LNXVIDEO:00: Restoring backlight state
[11056.141444] usb 1-1.1: new full-speed USB device number 43 using ehci-pci
[11056.229472] usb 1-1.5: new high-speed USB device number 44 using ehci-pci
[11056.332381] usb 1-1.5: New USB device found, idVendor=0bda, idProduct=0158
[11056.332388] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[11056.332391] usb 1-1.5: Product: USB2.0-CRW
[11056.332393] usb 1-1.5: Manufacturer: Generic
[11056.332396] usb 1-1.5: SerialNumber: 20071114173400000
[11056.337202] ums-realtek 1-1.5:1.0: USB Mass Storage device detected
[11056.351192] scsi8 : usb-storage 1-1.5:1.0
[11056.477972] usb 1-1.5: USB disconnect, device number 44
[11057.194891] r8169 0000:04:00.0 eth0: link down
[11057.194998] r8169 0000:04:00.0 eth0: link down
[11057.195105] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[11058.716139] r8169 0000:04:00.0 eth0: link up
[11058.716156] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[11060.670159] type=1400 audit(1385377546.057:85): apparmor="DENIED" operation="ptrace" parent=1610 profile="/usr/lib/telepathy/telepathy-*" pid=8113 comm="telepathy-haze" target=642240330188FFFF642240330188FFFF10C440330188FFFF10C440330188FFFF20C440330188FFFF20C440330188FFFF5A09
[18441.424441] systemd-hostnamed[8920]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[19109.314093] FAT-fs (sda6): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[19110.737468] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[19112.356473] FAT-fs (sda8): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[19259.558753] systemd-hostnamed[9121]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[20466.391862] systemd-hostnamed[9193]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!