[ 20.321] X.Org X Server 1.13.0 Release Date: 2012-09-05 [ 20.321] X Protocol Version 11, Revision 0 [ 20.321] Build Operating System: Linux 3.2.0-23-generic x86_64 Ubuntu [ 20.321] Current Operating System: Linux nedas-300V3Z-300V4Z-300V5Z 3.5.0-15-generic #23-Ubuntu SMP Mon Sep 24 20:37:06 UTC 2012 x86_64 [ 20.321] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-15-generic root=UUID=7078a0c9-3b73-4ae5-aa9d-0eba663905ca ro quiet splash vt.handoff=7 [ 20.321] Build Date: 20 September 2012 12:04:04PM [ 20.321] xorg-server 2:1.13.0-0ubuntu4 (For technical support please see http://www.ubuntu.com/support) [ 20.321] Current version of pixman: 0.26.0 [ 20.321] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 20.321] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 20.321] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 27 08:02:25 2012 [ 20.342] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 20.342] (==) No Layout section. Using the first Screen section. [ 20.342] (==) No screen section available. Using defaults. [ 20.342] (**) |-->Screen "Default Screen Section" (0) [ 20.342] (**) | |-->Monitor "" [ 20.342] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 20.342] (==) Automatically adding devices [ 20.342] (==) Automatically enabling devices [ 20.342] (==) Automatically adding GPU devices [ 20.343] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 20.343] Entry deleted from font path. [ 20.343] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 20.343] Entry deleted from font path. [ 20.343] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 20.343] Entry deleted from font path. [ 20.343] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 20.343] Entry deleted from font path. [ 20.343] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 20.343] Entry deleted from font path. [ 20.343] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 20.343] Entry deleted from font path. [ 20.343] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 20.343] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 20.343] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 20.343] (II) Loader magic: 0x7f543352fc40 [ 20.343] (II) Module ABI versions: [ 20.343] X.Org ANSI C Emulation: 0.4 [ 20.343] X.Org Video Driver: 13.0 [ 20.343] X.Org XInput driver : 18.0 [ 20.343] X.Org Server Extension : 7.0 [ 20.343] (II) config/udev: Adding drm device (/dev/dri/card0) [ 20.344] (--) PCI:*(0:0:2:0) 8086:0116:144d:c0b6 rev 9, Mem @ 0xe1000000/4194304, 0xd0000000/268435456, I/O @ 0x00004000/64 [ 20.344] (--) PCI: (0:1:0:0) 10de:1051:144d:c0b6 rev 161, Mem @ 0xe0000000/16777216, 0xb0000000/268435456, 0xc0000000/33554432, I/O @ 0x00003000/128 [ 20.344] (II) Open ACPI successful (/var/run/acpid.socket) [ 20.344] Initializing built-in extension Generic Event Extension [ 20.344] Initializing built-in extension SHAPE [ 20.344] Initializing built-in extension MIT-SHM [ 20.344] Initializing built-in extension XInputExtension [ 20.344] Initializing built-in extension XTEST [ 20.344] Initializing built-in extension BIG-REQUESTS [ 20.344] Initializing built-in extension SYNC [ 20.344] Initializing built-in extension XKEYBOARD [ 20.344] Initializing built-in extension XC-MISC [ 20.344] Initializing built-in extension SECURITY [ 20.344] Initializing built-in extension XINERAMA [ 20.344] Initializing built-in extension XFIXES [ 20.344] Initializing built-in extension RENDER [ 20.344] Initializing built-in extension RANDR [ 20.344] Initializing built-in extension COMPOSITE [ 20.344] Initializing built-in extension DAMAGE [ 20.344] Initializing built-in extension MIT-SCREEN-SAVER [ 20.344] Initializing built-in extension DOUBLE-BUFFER [ 20.344] Initializing built-in extension RECORD [ 20.344] Initializing built-in extension DPMS [ 20.344] Initializing built-in extension X-Resource [ 20.344] Initializing built-in extension XVideo [ 20.344] Initializing built-in extension XVideo-MotionCompensation [ 20.344] Initializing built-in extension XFree86-VidModeExtension [ 20.344] Initializing built-in extension XFree86-DGA [ 20.344] Initializing built-in extension XFree86-DRI [ 20.344] Initializing built-in extension DRI2 [ 20.344] (II) LoadModule: "glx" [ 20.371] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 20.371] (II) Module glx: vendor="X.Org Foundation" [ 20.371] compiled for 1.13.0, module version = 1.0.0 [ 20.371] ABI class: X.Org Server Extension, version 7.0 [ 20.371] (==) AIGLX enabled [ 20.371] Loading extension GLX [ 20.371] (==) Matched intel as autoconfigured driver 0 [ 20.371] (==) Matched intel as autoconfigured driver 1 [ 20.371] (==) Matched vesa as autoconfigured driver 2 [ 20.371] (==) Matched modesetting as autoconfigured driver 3 [ 20.371] (==) Matched fbdev as autoconfigured driver 4 [ 20.371] (==) Assigned the driver to the xf86ConfigLayout [ 20.371] (II) LoadModule: "intel" [ 20.372] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 20.372] (II) Module intel: vendor="X.Org Foundation" [ 20.372] compiled for 1.13.0, module version = 2.20.8 [ 20.372] Module class: X.Org Video Driver [ 20.372] ABI class: X.Org Video Driver, version 13.0 [ 20.372] (II) LoadModule: "vesa" [ 20.372] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 20.372] (II) Module vesa: vendor="X.Org Foundation" [ 20.372] compiled for 1.12.99.902, module version = 2.3.2 [ 20.372] Module class: X.Org Video Driver [ 20.372] ABI class: X.Org Video Driver, version 13.0 [ 20.372] (II) LoadModule: "modesetting" [ 20.372] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 20.372] (II) Module modesetting: vendor="X.Org Foundation" [ 20.372] compiled for 1.13.0, module version = 0.5.0 [ 20.373] Module class: X.Org Video Driver [ 20.373] ABI class: X.Org Video Driver, version 13.0 [ 20.373] (II) LoadModule: "fbdev" [ 20.373] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 20.373] (II) Module fbdev: vendor="X.Org Foundation" [ 20.373] compiled for 1.12.99.902, module version = 0.4.3 [ 20.373] Module class: X.Org Video Driver [ 20.373] ABI class: X.Org Video Driver, version 13.0 [ 20.373] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2), Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2), Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2), Haswell Server (GT2+), Haswell SDV Desktop (GT1), Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+), Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2), Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1), Haswell SDV Server (GT2), Haswell SDV Server (GT2+), Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2), Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1), Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+), Haswell ULT Server (GT1), Haswell ULT Server (GT2), Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1), Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+), Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2), Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1), Haswell CRW Server (GT2), Haswell CRW Server (GT2+), ValleyView PO board [ 20.373] (II) VESA: driver for VESA chipsets: vesa [ 20.373] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 20.373] (II) FBDEV: driver for framebuffer: fbdev [ 20.373] (++) using VT number 7 [ 20.373] (II) intel(0): using device path '/dev/dri/card0' [ 20.373] (WW) Falling back to old probe method for vesa [ 20.373] (WW) Falling back to old probe method for modesetting [ 20.373] (WW) Falling back to old probe method for fbdev [ 20.373] (II) Loading sub module "fbdevhw" [ 20.373] (II) LoadModule: "fbdevhw" [ 20.374] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 20.374] (II) Module fbdevhw: vendor="X.Org Foundation" [ 20.374] compiled for 1.13.0, module version = 0.0.2 [ 20.374] ABI class: X.Org Video Driver, version 13.0 [ 20.374] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 20.374] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 20.374] (==) intel(0): RGB weight 888 [ 20.374] (==) intel(0): Default visual is TrueColor [ 20.374] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2) [ 20.374] (**) intel(0): Relaxed fencing enabled [ 20.374] (**) intel(0): Wait on SwapBuffers? enabled [ 20.374] (**) intel(0): Triple buffering? enabled [ 20.374] (**) intel(0): Framebuffer tiled [ 20.374] (**) intel(0): Pixmaps tiled [ 20.374] (**) intel(0): 3D buffers tiled [ 20.374] (**) intel(0): SwapBuffers wait enabled [ 20.374] (==) intel(0): video overlay key set to 0x101fe [ 20.374] (II) intel(0): Output LVDS1 has no monitor section [ 20.374] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video1 [ 20.374] (II) intel(0): Output VGA1 has no monitor section [ 20.375] (II) intel(0): Output HDMI1 has no monitor section [ 20.428] (II) intel(0): Output DP1 has no monitor section [ 20.428] (II) intel(0): EDID for output LVDS1 [ 20.428] (II) intel(0): Manufacturer: SEC Model: 324a Serial#: 0 [ 20.428] (II) intel(0): Year: 2011 Week: 0 [ 20.428] (II) intel(0): EDID Version: 1.3 [ 20.428] (II) intel(0): Digital Display Input [ 20.428] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19 [ 20.428] (II) intel(0): Gamma: 2.20 [ 20.428] (II) intel(0): No DPMS capabilities specified [ 20.428] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 20.428] (II) intel(0): First detailed timing is preferred mode [ 20.428] (II) intel(0): redX: 0.570 redY: 0.340 greenX: 0.330 greenY: 0.560 [ 20.428] (II) intel(0): blueX: 0.160 blueY: 0.135 whiteX: 0.313 whiteY: 0.329 [ 20.428] (II) intel(0): Manufacturer's mask: 0 [ 20.428] (II) intel(0): Supported detailed timing: [ 20.428] (II) intel(0): clock: 70.7 MHz Image Size: 344 x 194 mm [ 20.428] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1486 h_border: 0 [ 20.428] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 792 v_border: 0 [ 20.428] (II) intel(0): Unknown vendor-specific block f [ 20.428] (II) intel(0): SAMSUNG [ 20.428] (II) intel(0): LTN156AT190 [ 20.428] (II) intel(0): EDID (in hex): [ 20.428] (II) intel(0): 00ffffffffffff004ca34a3200000000 [ 20.428] (II) intel(0): 00150103802213780a09259257548f29 [ 20.428] (II) intel(0): 22505400000001010101010101010101 [ 20.428] (II) intel(0): 0101010101019e1b5678500018303020 [ 20.428] (II) intel(0): 250058c2100000190000000f00000000 [ 20.428] (II) intel(0): 00000000002387026401000000fe0053 [ 20.428] (II) intel(0): 414d53554e470a2020202020000000fe [ 20.428] (II) intel(0): 004c544e31353641543139300a2000b4 [ 20.428] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 20.428] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 20.428] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 20.428] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 20.428] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 20.428] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 20.428] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 20.428] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 20.428] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 20.428] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 20.428] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) [ 20.428] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 20.428] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 20.428] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 20.428] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported) [ 20.428] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported) [ 20.428] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 20.428] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 20.428] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) [ 20.428] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) [ 20.428] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 20.428] (II) intel(0): Printing probed modes for output LVDS1 [ 20.428] (II) intel(0): Modeline "1366x768"x60.1 70.70 1366 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz eP) [ 20.428] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d) [ 20.428] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d) [ 20.428] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 20.428] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 20.428] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 20.428] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 20.428] (II) intel(0): EDID for output VGA1 [ 20.429] (II) intel(0): EDID for output HDMI1 [ 20.476] (II) intel(0): EDID for output DP1 [ 20.476] (II) intel(0): Output LVDS1 connected [ 20.476] (II) intel(0): Output VGA1 disconnected [ 20.476] (II) intel(0): Output HDMI1 disconnected [ 20.476] (II) intel(0): Output DP1 disconnected [ 20.476] (II) intel(0): Using exact sizes for initial modes [ 20.476] (II) intel(0): Output LVDS1 using initial mode 1366x768 [ 20.476] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 20.476] (II) intel(0): Kernel page flipping support detected, enabling [ 20.476] (==) intel(0): DPI set to (96, 96) [ 20.476] (II) Loading sub module "fb" [ 20.476] (II) LoadModule: "fb" [ 20.476] (II) Loading /usr/lib/xorg/modules/libfb.so [ 20.476] (II) Module fb: vendor="X.Org Foundation" [ 20.476] compiled for 1.13.0, module version = 1.0.0 [ 20.476] ABI class: X.Org ANSI C Emulation, version 0.4 [ 20.476] (II) Loading sub module "dri2" [ 20.476] (II) LoadModule: "dri2" [ 20.476] (II) Module "dri2" already built-in [ 20.476] (II) UnloadModule: "vesa" [ 20.476] (II) Unloading vesa [ 20.476] (II) UnloadModule: "modesetting" [ 20.476] (II) Unloading modesetting [ 20.476] (II) UnloadModule: "fbdev" [ 20.476] (II) Unloading fbdev [ 20.476] (II) UnloadSubModule: "fbdevhw" [ 20.476] (II) Unloading fbdevhw [ 20.476] (==) Depth 24 pixmap format is 32 bpp [ 20.476] (II) intel(0): [DRI2] Setup complete [ 20.476] (II) intel(0): [DRI2] DRI driver: i965 [ 20.476] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled [ 20.477] (II) UXA(0): Driver registered support for the following operations: [ 20.477] (II) solid [ 20.477] (II) copy [ 20.477] (II) composite (RENDER acceleration) [ 20.477] (II) put_image [ 20.477] (II) get_image [ 20.477] (==) intel(0): Backing store disabled [ 20.477] (==) intel(0): Silken mouse enabled [ 20.477] (II) intel(0): Initializing HW Cursor [ 20.477] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 20.478] (==) intel(0): DPMS enabled [ 20.478] (==) intel(0): Intel XvMC decoder enabled [ 20.478] (II) intel(0): Set up textured video [ 20.478] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 20.478] (II) intel(0): direct rendering: DRI2 Enabled [ 20.478] (==) intel(0): hotplug detection: "enabled" [ 20.488] (--) RandR disabled [ 20.499] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 20.499] (II) AIGLX: enabled GLX_INTEL_swap_event [ 20.499] (II) AIGLX: enabled GLX_ARB_create_context [ 20.499] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 20.499] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 20.499] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 20.499] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 20.499] (II) AIGLX: Loaded and initialized i965 [ 20.499] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 20.499] (II) intel(0): Setting screen physical size to 361 x 203 [ 20.506] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 20.508] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 20.508] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 20.508] (II) LoadModule: "evdev" [ 20.508] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 20.508] (II) Module evdev: vendor="X.Org Foundation" [ 20.508] compiled for 1.12.99.904, module version = 2.7.3 [ 20.508] Module class: X.Org XInput Driver [ 20.508] ABI class: X.Org XInput driver, version 18.0 [ 20.508] (II) Using input driver 'evdev' for 'Power Button' [ 20.508] (**) Power Button: always reports core events [ 20.508] (**) evdev: Power Button: Device: "/dev/input/event2" [ 20.508] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 20.508] (--) evdev: Power Button: Found keys [ 20.508] (II) evdev: Power Button: Configuring as keyboard [ 20.508] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 20.509] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 20.509] (**) Option "xkb_rules" "evdev" [ 20.509] (**) Option "xkb_model" "pc105" [ 20.509] (**) Option "xkb_layout" "us" [ 20.509] (II) config/udev: Adding input device Video Bus (/dev/input/event7) [ 20.509] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 20.509] (II) Using input driver 'evdev' for 'Video Bus' [ 20.509] (**) Video Bus: always reports core events [ 20.509] (**) evdev: Video Bus: Device: "/dev/input/event7" [ 20.509] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 20.509] (--) evdev: Video Bus: Found keys [ 20.509] (II) evdev: Video Bus: Configuring as keyboard [ 20.509] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7/event7" [ 20.509] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 20.509] (**) Option "xkb_rules" "evdev" [ 20.509] (**) Option "xkb_model" "pc105" [ 20.509] (**) Option "xkb_layout" "us" [ 20.510] (II) config/udev: Adding input device Video Bus (/dev/input/event6) [ 20.510] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 20.510] (II) Using input driver 'evdev' for 'Video Bus' [ 20.510] (**) Video Bus: always reports core events [ 20.510] (**) evdev: Video Bus: Device: "/dev/input/event6" [ 20.510] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 20.510] (--) evdev: Video Bus: Found keys [ 20.510] (II) evdev: Video Bus: Configuring as keyboard [ 20.510] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2c/LNXVIDEO:00/input/input6/event6" [ 20.510] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8) [ 20.510] (**) Option "xkb_rules" "evdev" [ 20.510] (**) Option "xkb_model" "pc105" [ 20.510] (**) Option "xkb_layout" "us" [ 20.510] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 20.510] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 20.510] (II) Using input driver 'evdev' for 'Power Button' [ 20.510] (**) Power Button: always reports core events [ 20.510] (**) evdev: Power Button: Device: "/dev/input/event1" [ 20.510] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 20.510] (--) evdev: Power Button: Found keys [ 20.510] (II) evdev: Power Button: Configuring as keyboard [ 20.510] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1" [ 20.510] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9) [ 20.510] (**) Option "xkb_rules" "evdev" [ 20.510] (**) Option "xkb_model" "pc105" [ 20.510] (**) Option "xkb_layout" "us" [ 20.511] (II) config/udev: Adding input device Lid Switch (/dev/input/event0) [ 20.511] (II) No input driver specified, ignoring this device. [ 20.511] (II) This device may have been added with another device file. [ 20.511] (II) config/udev: Adding drm device (/dev/dri/card0) [ 20.511] (II) config/udev: Adding input device WebCam SCB-1100N (/dev/input/event4) [ 20.511] (**) WebCam SCB-1100N: Applying InputClass "evdev keyboard catchall" [ 20.511] (II) Using input driver 'evdev' for 'WebCam SCB-1100N' [ 20.511] (**) WebCam SCB-1100N: always reports core events [ 20.511] (**) evdev: WebCam SCB-1100N: Device: "/dev/input/event4" [ 20.511] (--) evdev: WebCam SCB-1100N: Vendor 0x2232 Product 0x1008 [ 20.511] (--) evdev: WebCam SCB-1100N: Found keys [ 20.511] (II) evdev: WebCam SCB-1100N: Configuring as keyboard [ 20.511] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input4/event4" [ 20.511] (II) XINPUT: Adding extended input device "WebCam SCB-1100N" (type: KEYBOARD, id 10) [ 20.511] (**) Option "xkb_rules" "evdev" [ 20.511] (**) Option "xkb_model" "pc105" [ 20.511] (**) Option "xkb_layout" "us" [ 20.512] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10) [ 20.512] (II) No input driver specified, ignoring this device. [ 20.512] (II) This device may have been added with another device file. [ 20.512] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event8) [ 20.512] (II) No input driver specified, ignoring this device. [ 20.512] (II) This device may have been added with another device file. [ 20.512] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9) [ 20.512] (II) No input driver specified, ignoring this device. [ 20.512] (II) This device may have been added with another device file. [ 20.512] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) [ 20.512] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 20.512] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 20.513] (**) AT Translated Set 2 keyboard: always reports core events [ 20.513] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3" [ 20.513] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 20.513] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 20.513] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 20.513] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3" [ 20.513] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11) [ 20.513] (**) Option "xkb_rules" "evdev" [ 20.513] (**) Option "xkb_model" "pc105" [ 20.513] (**) Option "xkb_layout" "us" [ 20.513] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event5) [ 20.513] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall" [ 20.513] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall" [ 20.513] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons" [ 20.513] (II) LoadModule: "synaptics" [ 20.513] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 20.513] (II) Module synaptics: vendor="X.Org Foundation" [ 20.513] compiled for 1.12.99.905, module version = 1.6.2 [ 20.513] Module class: X.Org XInput Driver [ 20.513] ABI class: X.Org XInput driver, version 18.0 [ 20.513] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad' [ 20.513] (**) ETPS/2 Elantech Touchpad: always reports core events [ 20.513] (**) Option "Device" "/dev/input/event5" [ 20.514] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2940 [ 20.514] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1400 [ 20.514] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255 [ 20.514] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15 [ 20.514] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple [ 20.514] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe [ 20.514] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found [ 20.514] (**) ETPS/2 Elantech Touchpad: always reports core events [ 20.514] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5" [ 20.514] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12) [ 20.514] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5 [ 20.514] (**) synaptics: ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75 [ 20.514] (**) synaptics: ETPS/2 Elantech Touchpad: AccelFactor is now 0.061 [ 20.514] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1 [ 20.514] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1 [ 20.514] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000 [ 20.514] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4 [ 20.514] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found [ 20.515] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0) [ 20.515] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates" [ 21.228] (II) intel(0): EDID vendor "SEC", prod id 12874 [ 21.228] (II) intel(0): Printing DDC gathered Modelines: [ 21.228] (II) intel(0): Modeline "1366x768"x0.0 70.70 1366 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz eP) [ 21.842] (II) intel(0): EDID vendor "SEC", prod id 12874 [ 21.842] (II) intel(0): Printing DDC gathered Modelines: [ 21.842] (II) intel(0): Modeline "1366x768"x0.0 70.70 1366 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz eP) [ 22.856] (II) intel(0): EDID vendor "SEC", prod id 12874 [ 22.856] (II) intel(0): Printing DDC gathered Modelines: [ 22.856] (II) intel(0): Modeline "1366x768"x0.0 70.70 1366 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz eP) [ 23.035] (II) XKB: reuse xkmfile /var/lib/xkb/server-C598C4C81CF7592F7239E3FC2AF43E08B942E0D9.xkm [ 25.468] (II) intel(0): EDID vendor "SEC", prod id 12874 [ 25.468] (II) intel(0): Printing DDC gathered Modelines: [ 25.468] (II) intel(0): Modeline "1366x768"x0.0 70.70 1366 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz eP) [ 2406.130] (II) UnloadModule: "synaptics" [ 2406.130] (II) evdev: AT Translated Set 2 keyboard: Close [ 2406.130] (II) UnloadModule: "evdev" [ 2406.130] (II) evdev: WebCam SCB-1100N: Close [ 2406.130] (II) UnloadModule: "evdev" [ 2406.130] (II) evdev: Power Button: Close [ 2406.130] (II) UnloadModule: "evdev" [ 2406.130] (II) evdev: Video Bus: Close [ 2406.130] (II) UnloadModule: "evdev" [ 2406.130] (II) evdev: Video Bus: Close [ 2406.131] (II) UnloadModule: "evdev" [ 2406.131] (II) evdev: Power Button: Close [ 2406.131] (II) UnloadModule: "evdev" [ 2407.096] Server terminated successfully (0). Closing log file.