[ 0.000000] microcode: CPU0 microcode updated early to revision 0x1d, date = 2015-08-13 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.0-4-generic (buildd@lgw01-32) (gcc version 5.3.1 20160121 (Ubuntu 5.3.1-7ubuntu1) ) #19-Ubuntu SMP Fri Feb 5 17:39:10 UTC 2016 (Ubuntu 4.4.0-4.19-generic 4.4.1) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-4-generic.efi.signed root=UUID=a06f42c2-bc65-4875-a0ce-64d9f1593e8b ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000adaa4fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000adaa5000-0x00000000adaabfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000adaac000-0x00000000ae2e2fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ae2e3000-0x00000000ae549fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ae54a000-0x00000000bd93dfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bd93e000-0x00000000bdb45fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bdb46000-0x00000000bde82fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bde83000-0x00000000beb4cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000beb4d000-0x00000000bef59fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bef5a000-0x00000000beffefff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000befff000-0x00000000beffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfc00000-0x00000000dfdfffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f1fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ACPI 2.0=0xbeb0a000 ACPI=0xbeb0a000 SMBIOS=0xbef58318 [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: ASUSTeK COMPUTER INC. X751LA/X751LA, BIOS X751LA.302 02/07/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x21f200 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back [ 0.000000] 1 base 0200000000 mask 7FF0000000 write-back [ 0.000000] 2 base 0210000000 mask 7FF8000000 write-back [ 0.000000] 3 base 0218000000 mask 7FFC000000 write-back [ 0.000000] 4 base 021C000000 mask 7FFE000000 write-back [ 0.000000] 5 base 021E000000 mask 7FFF000000 write-back [ 0.000000] 6 base 021F000000 mask 7FFFE00000 write-back [ 0.000000] 7 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 8 base 00BFC00000 mask 7FFFC00000 uncachable [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 8GB, type WB [ 0.000000] reg 1, base: 8GB, range: 256MB, type WB [ 0.000000] reg 2, base: 8448MB, range: 128MB, type WB [ 0.000000] reg 3, base: 8576MB, range: 64MB, type WB [ 0.000000] reg 4, base: 8640MB, range: 32MB, type WB [ 0.000000] reg 5, base: 8672MB, range: 16MB, type WB [ 0.000000] reg 6, base: 8688MB, range: 2MB, type WB [ 0.000000] reg 7, base: 3GB, range: 1GB, type UC [ 0.000000] reg 8, base: 3068MB, range: 4MB, type UC [ 0.000000] total RAM covered: 7662M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 8 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3068MB, range: 4MB, type UC [ 0.000000] reg 3, base: 4GB, range: 4GB, type WB [ 0.000000] reg 4, base: 8GB, range: 512MB, type WB [ 0.000000] reg 5, base: 8690MB, range: 2MB, type UC [ 0.000000] reg 6, base: 8692MB, range: 4MB, type UC [ 0.000000] reg 7, base: 8696MB, range: 8MB, type UC [ 0.000000] e820: update [mem 0xbfc00000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbf000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x031fc000, 0x031fcfff] PGTABLE [ 0.000000] BRK [0x031fd000, 0x031fdfff] PGTABLE [ 0.000000] BRK [0x031fe000, 0x031fefff] PGTABLE [ 0.000000] BRK [0x031ff000, 0x031fffff] PGTABLE [ 0.000000] BRK [0x03200000, 0x03200fff] PGTABLE [ 0.000000] BRK [0x03201000, 0x03201fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x33d08000-0x35e7bfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000BEB0A000 000024 (v02 _ASUS_) [ 0.000000] ACPI: XSDT 0x00000000BEB0A090 0000AC (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000BEB202C8 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000BEB0A258 01606C (v02 _ASUS_ Notebook 00000012 INTL 20120711) [ 0.000000] ACPI: FACS 0x00000000BEB4A080 000040 [ 0.000000] ACPI: APIC 0x00000000BEB203D8 000072 (v03 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000BEB20450 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.000000] ACPI: ECDT 0x00000000BEB20498 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005) [ 0.000000] ACPI: LPIT 0x00000000BEB20560 00005C (v01 _ASUS_ Notebook 00000000 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000BEB205C0 000174 (v01 Intel zpoddult 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000BEB20738 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000BEB20C78 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000BEB21750 0002DE (v01 PmRef Cpu0Tst 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000BEB21A30 000348 (v01 PmRef ApTst 00003000 INTL 20120711) [ 0.000000] ACPI: MCFG 0x00000000BEB21D78 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097) [ 0.000000] ACPI: SSDT 0x00000000BEB21DB8 003043 (v01 DptfTa DptfTabl 00001000 INTL 20120711) [ 0.000000] ACPI: HPET 0x00000000BEB24E00 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000BEB24E38 000298 (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000BEB250D0 003DFF (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.000000] ACPI: BGRT 0x00000000BEB28ED0 000038 (v00 _ASUS_ Notebook 01072009 ASUS 00010013) [ 0.000000] ACPI: MSDM 0x00000000BDB44E18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021f1fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x21f1f6000-0x21f1f9fff] [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000000001000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000021f1fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000adaa4fff] [ 0.000000] node 0: [mem 0x00000000adaac000-0x00000000ae2e2fff] [ 0.000000] node 0: [mem 0x00000000ae54a000-0x00000000bd93dfff] [ 0.000000] node 0: [mem 0x00000000bdb46000-0x00000000bde82fff] [ 0.000000] node 0: [mem 0x00000000befff000-0x00000000beffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000021f1fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f1fffff] [ 0.000000] On node 0 totalpages: 1952682 [ 0.000000] DMA32 zone: 12135 pages used for memmap [ 0.000000] DMA32 zone: 22 pages reserved [ 0.000000] DMA32 zone: 776618 pages, LIFO batch:31 [ 0.000000] Normal zone: 18376 pages used for memmap [ 0.000000] Normal zone: 1176064 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xbfe00000-0xdfdfffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xadaa5000-0xadaabfff] [ 0.000000] PM: Registered nosave memory: [mem 0xae2e3000-0xae549fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbd93e000-0xbdb45fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbde83000-0xbeb4cfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbeb4d000-0xbef59fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbef5a000-0xbeffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xbfbfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfc00000-0xdfdfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfe00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdfe00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88021ee00000 s97432 r8192 d29544 u524288 [ 0.000000] pcpu-alloc: s97432 r8192 d29544 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1922149 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-4-generic.efi.signed root=UUID=a06f42c2-bc65-4875-a0ce-64d9f1593e8b ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7529284K/7810728K available (8282K kernel code, 1274K rwdata, 3912K rodata, 1472K init, 1292K bss, 281444K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16640 nr_irqs:728 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2296.606 MHz processor [ 0.000043] Calibrating delay loop (skipped), value calculated using timer frequency.. 4593.21 BogoMIPS (lpj=9186424) [ 0.000047] pid_max: default: 32768 minimum: 301 [ 0.000052] ACPI: Core revision 20150930 [ 0.034604] ACPI: 9 ACPI AML tables successfully acquired and loaded [ 0.035878] Security Framework initialized [ 0.035881] Yama: becoming mindful. [ 0.035895] AppArmor: AppArmor initialized [ 0.036655] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.038981] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.039967] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.039982] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.040251] Initializing cgroup subsys io [ 0.040255] Initializing cgroup subsys memory [ 0.040263] Initializing cgroup subsys devices [ 0.040266] Initializing cgroup subsys freezer [ 0.040268] Initializing cgroup subsys net_cls [ 0.040271] Initializing cgroup subsys perf_event [ 0.040274] Initializing cgroup subsys net_prio [ 0.040276] Initializing cgroup subsys hugetlb [ 0.040281] Initializing cgroup subsys pids [ 0.040310] CPU: Physical Processor ID: 0 [ 0.040312] CPU: Processor Core ID: 0 [ 0.040318] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.040319] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.041604] mce: CPU supports 7 MCE banks [ 0.041622] CPU0: Thermal monitoring enabled (TM1) [ 0.041633] process: using mwait in idle threads [ 0.041637] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.041639] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.042122] Freeing SMP alternatives memory: 28K (ffffffff820b0000 - ffffffff820b7000) [ 0.048139] ftrace: allocating 31739 entries in 124 pages [ 0.067894] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.107584] TSC deadline timer enabled [ 0.107587] smpboot: CPU0: Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz (family: 0x6, model: 0x45, stepping: 0x1) [ 0.107624] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver. [ 0.107653] ... version: 3 [ 0.107654] ... bit width: 48 [ 0.107655] ... generic registers: 4 [ 0.107656] ... value mask: 0000ffffffffffff [ 0.107658] ... max period: 0000ffffffffffff [ 0.107659] ... fixed-purpose events: 3 [ 0.107660] ... event mask: 000000070000000f [ 0.108742] x86: Booting SMP configuration: [ 0.108744] .... node #0, CPUs: #1 [ 0.110874] microcode: CPU1 microcode updated early to revision 0x1d, date = 2015-08-13 [ 0.114361] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.114457] #2 #3 [ 0.122411] x86: Booted up 1 node, 4 CPUs [ 0.122416] smpboot: Total of 4 processors activated (18372.84 BogoMIPS) [ 0.127834] devtmpfs: initialized [ 0.131114] evm: security.selinux [ 0.131116] evm: security.SMACK64 [ 0.131118] evm: security.SMACK64EXEC [ 0.131119] evm: security.SMACK64TRANSMUTE [ 0.131120] evm: security.SMACK64MMAP [ 0.131121] evm: security.ima [ 0.131122] evm: security.capability [ 0.131208] PM: Registering ACPI NVS region [mem 0xadaa5000-0xadaabfff] (28672 bytes) [ 0.131211] PM: Registering ACPI NVS region [mem 0xbde83000-0xbeb4cfff] (13410304 bytes) [ 0.131546] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.131665] pinctrl core: initialized pinctrl subsystem [ 0.131808] RTC time: 10:36:06, date: 02/12/16 [ 0.131971] NET: Registered protocol family 16 [ 0.151664] cpuidle: using governor ladder [ 0.167668] cpuidle: using governor menu [ 0.167673] PCCT header not found. [ 0.167758] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.167760] ACPI: bus type PCI registered [ 0.167762] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.167854] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.167857] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.167870] PCI: Using configuration type 1 for base access [ 0.168199] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.180126] ACPI: Added _OSI(Module Device) [ 0.180129] ACPI: Added _OSI(Processor Device) [ 0.180131] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.180133] ACPI: Added _OSI(Processor Aggregator Device) [ 0.183927] ACPI : EC: EC description table is found, configuring boot EC [ 0.183941] ACPI : EC: EC started [ 0.187897] ACPI: Executed 2 blocks of module-level executable AML code [ 0.192725] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.195653] ACPI: Dynamic OEM Table Load: [ 0.195662] ACPI: SSDT 0xFFFF8802159A4C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.196938] ACPI: Dynamic OEM Table Load: [ 0.196946] ACPI: SSDT 0xFFFF880215922800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.198270] ACPI: Dynamic OEM Table Load: [ 0.198276] ACPI: SSDT 0xFFFF880215945C00 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.200384] ACPI: Interpreter enabled [ 0.200398] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580) [ 0.200408] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580) [ 0.200440] ACPI: (supports S0 S3 S4 S5) [ 0.200442] ACPI: Using IOAPIC for interrupt routing [ 0.200479] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.218216] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.218225] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.218621] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 0.218892] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.218894] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.219421] PCI host bridge to bus 0000:00 [ 0.219425] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.219428] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.219430] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.219432] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.219434] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.219436] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.219438] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.219440] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.219442] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.219444] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.219446] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.219448] pci_bus 0000:00: root bus resource [mem 0xdfe00000-0xfeafffff window] [ 0.219451] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.219461] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000 [ 0.219598] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000 [ 0.219618] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.219627] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.219634] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.219761] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300 [ 0.219778] pci 0000:00:03.0: reg 0x10: [mem 0xf7e1c000-0xf7e1ffff 64bit] [ 0.219907] pci 0000:00:04.0: [8086:0a03] type 00 class 0x118000 [ 0.219927] pci 0000:00:04.0: reg 0x10: [mem 0xf7e10000-0xf7e17fff 64bit] [ 0.220072] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330 [ 0.220100] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit] [ 0.220158] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.220218] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.220267] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000 [ 0.220300] pci 0000:00:16.0: reg 0x10: [mem 0xf7e25000-0xf7e2501f 64bit] [ 0.220365] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.220477] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300 [ 0.220504] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e18000-0xf7e1bfff 64bit] [ 0.220569] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.220630] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.220677] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400 [ 0.220746] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.220860] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.220909] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400 [ 0.220982] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.221088] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.221135] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400 [ 0.221207] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.221311] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.221364] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320 [ 0.221396] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e23000-0xf7e233ff] [ 0.221478] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.221555] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.221607] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100 [ 0.221819] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601 [ 0.221843] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] [ 0.221851] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] [ 0.221859] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] [ 0.221867] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] [ 0.221876] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.221884] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e22000-0xf7e227ff] [ 0.221915] pci 0000:00:1f.2: PME# supported from D3hot [ 0.222014] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500 [ 0.222033] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e21000-0xf7e210ff 64bit] [ 0.222055] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.222174] pci 0000:00:1f.6: [8086:9c24] type 00 class 0x118000 [ 0.222220] pci 0000:00:1f.6: reg 0x10: [mem 0xf7e20000-0xf7e20fff 64bit] [ 0.222494] acpiphp: Slot [1] registered [ 0.222500] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.222613] pci 0000:02:00.0: [10ec:5287] type 00 class 0xff0000 [ 0.222656] pci 0000:02:00.0: reg 0x10: [mem 0xf7d15000-0xf7d15fff] [ 0.222726] pci 0000:02:00.0: reg 0x30: [mem 0xf7d00000-0xf7d0ffff pref] [ 0.222797] pci 0000:02:00.0: supports D1 D2 [ 0.222799] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.222848] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.222906] pci 0000:02:00.1: [10ec:8168] type 00 class 0x020000 [ 0.222948] pci 0000:02:00.1: reg 0x10: [io 0xe000-0xe0ff] [ 0.222980] pci 0000:02:00.1: reg 0x18: [mem 0xf7d14000-0xf7d14fff 64bit] [ 0.222999] pci 0000:02:00.1: reg 0x20: [mem 0xf7d10000-0xf7d13fff 64bit] [ 0.223074] pci 0000:02:00.1: supports D1 D2 [ 0.223076] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.227738] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.227743] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] [ 0.227747] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.227859] pci 0000:03:00.0: [168c:0036] type 00 class 0x028000 [ 0.227903] pci 0000:03:00.0: reg 0x10: [mem 0xf7c00000-0xf7c7ffff 64bit] [ 0.227960] pci 0000:03:00.0: reg 0x30: [mem 0xf7c80000-0xf7c8ffff pref] [ 0.228017] pci 0000:03:00.0: supports D1 D2 [ 0.228019] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.228061] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.235733] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.235739] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.236953] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. [ 0.237016] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.237076] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.237135] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.237192] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.237250] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.237309] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.237370] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.237787] ACPI: Enabled 4 GPEs in block 00 to 7F [ 0.237889] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62 [ 0.238042] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.238044] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.238048] vgaarb: loaded [ 0.238050] vgaarb: bridge control possible 0000:00:02.0 [ 0.238379] SCSI subsystem initialized [ 0.238434] libata version 3.00 loaded. [ 0.238468] ACPI: bus type USB registered [ 0.238490] usbcore: registered new interface driver usbfs [ 0.238501] usbcore: registered new interface driver hub [ 0.238524] usbcore: registered new device driver usb [ 0.238773] PCI: Using ACPI for IRQ routing [ 0.240308] PCI: pci_cache_line_size set to 64 bytes [ 0.240363] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.240365] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.240367] e820: reserve RAM buffer [mem 0xadaa5000-0xafffffff] [ 0.240369] e820: reserve RAM buffer [mem 0xae2e3000-0xafffffff] [ 0.240370] e820: reserve RAM buffer [mem 0xbd93e000-0xbfffffff] [ 0.240373] e820: reserve RAM buffer [mem 0xbde83000-0xbfffffff] [ 0.240375] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff] [ 0.240377] e820: reserve RAM buffer [mem 0x21f200000-0x21fffffff] [ 0.240535] NetLabel: Initializing [ 0.240537] NetLabel: domain hash size = 128 [ 0.240538] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.240554] NetLabel: unlabeled traffic allowed by default [ 0.240650] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.240657] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.242685] clocksource: Switched to clocksource hpet [ 0.250543] AppArmor: AppArmor Filesystem Enabled [ 0.250634] pnp: PnP ACPI init [ 0.250782] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.250788] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.251087] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.251091] system 00:01: [io 0xffff] has been reserved [ 0.251093] system 00:01: [io 0xffff] has been reserved [ 0.251096] system 00:01: [io 0xffff] has been reserved [ 0.251099] system 00:01: [io 0x1c00-0x1cfe] has been reserved [ 0.251102] system 00:01: [io 0x1d00-0x1dfe] has been reserved [ 0.251105] system 00:01: [io 0x1e00-0x1efe] has been reserved [ 0.251107] system 00:01: [io 0x1f00-0x1ffe] has been reserved [ 0.251110] system 00:01: [io 0x1800-0x18fe] could not be reserved [ 0.251113] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.251117] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.251155] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.251225] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.251229] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.251300] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.251304] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.251351] system 00:05: [io 0x0240-0x0259] has been reserved [ 0.251355] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.251436] pnp 00:06: Plug and Play ACPI device, IDs ETD0108 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active) [ 0.251489] pnp 00:07: Plug and Play ACPI device, IDs ATK3001 PNP030b (active) [ 0.251945] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.252310] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.252313] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.252316] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.252319] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.252323] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.252325] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.252328] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.252331] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.252334] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 0.252337] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.252340] system 00:09: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 0.252343] system 00:09: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.252347] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.252453] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.252912] pnp: PnP ACPI: found 11 devices [ 0.259663] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.259698] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.259712] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.259715] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] [ 0.259720] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.259729] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.259734] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.259744] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.259746] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.259749] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.259751] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.259753] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.259755] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.259757] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.259759] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.259761] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.259763] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.259765] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.259767] pci_bus 0000:00: resource 15 [mem 0xdfe00000-0xfeafffff window] [ 0.259770] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.259772] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 0.259774] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.259813] NET: Registered protocol family 2 [ 0.260027] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.260215] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.260366] TCP: Hash tables configured (established 65536 bind 65536) [ 0.260400] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.260434] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.260504] NET: Registered protocol family 1 [ 0.260522] pci 0000:00:02.0: Video device with shadowed ROM [ 0.260618] PCI: CLS 64 bytes, default 64 [ 0.260673] Trying to unpack rootfs image as initramfs... [ 1.046641] Freeing initrd memory: 34256K (ffff880033d08000 - ffff880035e7c000) [ 1.046671] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.046674] software IO TLB [mem 0xb715f000-0xbb15f000] (64MB) mapped at [ffff8800b715f000-ffff8800bb15efff] [ 1.046767] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer [ 1.046769] hw unit of domain pp0-core 2^-14 Joules [ 1.046770] hw unit of domain package 2^-14 Joules [ 1.046771] hw unit of domain dram 2^-14 Joules [ 1.046772] hw unit of domain pp1-gpu 2^-14 Joules [ 1.046941] Scanning for low memory corruption every 60 seconds [ 1.047349] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 1.047380] audit: initializing netlink subsys (disabled) [ 1.047397] audit: type=2000 audit(1455273366.036:1): initialized [ 1.047924] Initialise system trusted keyring [ 1.048056] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 1.048058] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.049737] zbud: loaded [ 1.050017] VFS: Disk quotas dquot_6.6.0 [ 1.050058] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.050677] fuse init (API version 7.23) [ 1.050867] Key type big_key registered [ 1.051287] Key type asymmetric registered [ 1.051292] Asymmetric key parser 'x509' registered [ 1.051341] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.051381] io scheduler noop registered [ 1.051386] io scheduler deadline registered (default) [ 1.051427] io scheduler cfq registered [ 1.051955] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.051963] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.052003] efifb: probing for efifb [ 1.052018] efifb: framebuffer at 0xe0000000, mapped to 0xffffc90001000000, using 5632k, total 5632k [ 1.052020] efifb: mode is 1600x900x32, linelength=6400, pages=1 [ 1.052021] efifb: scrolling: redraw [ 1.052023] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.052154] Console: switching to colour frame buffer device 200x56 [ 1.052178] fb0: EFI VGA frame buffer device [ 1.052190] intel_idle: MWAIT substates: 0x11142120 [ 1.052192] intel_idle: v0.4 model 0x45 [ 1.052193] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.052599] ACPI: AC Adapter [AC0] (off-line) [ 1.052693] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 1.053389] ACPI: Lid Switch [LID] [ 1.053443] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 1.053448] ACPI: Sleep Button [SLPB] [ 1.053494] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.053497] ACPI: Power Button [PWRF] [ 1.056536] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.056539] ACPI: Thermal Zone [THRM] (40 C) [ 1.056591] GHES: HEST is not enabled! [ 1.056741] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.058975] Linux agpgart interface v0.103 [ 1.062916] brd: module loaded [ 1.064363] loop: module loaded [ 1.064633] libphy: Fixed MDIO Bus: probed [ 1.064639] tun: Universal TUN/TAP device driver, 1.6 [ 1.064640] tun: (C) 1999-2004 Max Krasnyansky [ 1.064691] PPP generic driver version 2.4.2 [ 1.064770] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.064777] ehci-pci: EHCI PCI platform driver [ 1.064929] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.064938] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 1.064953] ehci-pci 0000:00:1d.0: debug port 2 [ 1.068853] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.068868] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e23000 [ 1.075574] ACPI: Battery Slot [BAT0] (battery present) [ 1.078755] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.078799] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.078801] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.078804] usb usb1: Product: EHCI Host Controller [ 1.078806] usb usb1: Manufacturer: Linux 4.4.0-4-generic ehci_hcd [ 1.078807] usb usb1: SerialNumber: 0000:00:1d.0 [ 1.078970] hub 1-0:1.0: USB hub found [ 1.078976] hub 1-0:1.0: 2 ports detected [ 1.079138] ehci-platform: EHCI generic platform driver [ 1.079156] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.079164] ohci-pci: OHCI PCI platform driver [ 1.079179] ohci-platform: OHCI generic platform driver [ 1.079191] uhci_hcd: USB Universal Host Controller Interface driver [ 1.079343] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.079350] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.080423] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810 [ 1.080428] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.080588] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.080590] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.080592] usb usb2: Product: xHCI Host Controller [ 1.080594] usb usb2: Manufacturer: Linux 4.4.0-4-generic xhci-hcd [ 1.080596] usb usb2: SerialNumber: 0000:00:14.0 [ 1.080734] hub 2-0:1.0: USB hub found [ 1.080747] hub 2-0:1.0: 9 ports detected [ 1.084269] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.084274] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.084307] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.084310] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.084312] usb usb3: Product: xHCI Host Controller [ 1.084313] usb usb3: Manufacturer: Linux 4.4.0-4-generic xhci-hcd [ 1.084315] usb usb3: SerialNumber: 0000:00:14.0 [ 1.084454] hub 3-0:1.0: USB hub found [ 1.084463] hub 3-0:1.0: 4 ports detected [ 1.085801] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.088648] i8042: Detected active multiplexing controller, rev 1.1 [ 1.090346] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.090351] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.090389] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.090421] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.090451] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.090605] mousedev: PS/2 mouse device common for all mice [ 1.090814] rtc_cmos 00:02: RTC can wake from S4 [ 1.090962] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.090990] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.091001] i2c /dev entries driver [ 1.091066] device-mapper: uevent: version 1.0.3 [ 1.091151] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 1.091172] Intel P-state driver initializing. [ 1.091375] ledtrig-cpu: registered to indicate activity on CPUs [ 1.091386] EFI Variables Facility v0.08 2004-May-17 [ 1.095846] NET: Registered protocol family 10 [ 1.096283] NET: Registered protocol family 17 [ 1.096308] Key type dns_resolver registered [ 1.096752] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1d [ 1.096797] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1d [ 1.096818] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1d [ 1.096844] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1d [ 1.096925] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 1.097279] registered taskstats version 1 [ 1.097335] Loading compiled-in X.509 certificates [ 1.099196] Loaded X.509 cert 'Build time autogenerated kernel key: 3d52786245fdcd5b59a15bbf1b8b07d3cfb3d8ee' [ 1.099220] zswap: loaded using pool lzo/zbud [ 1.101377] Key type trusted registered [ 1.104208] Key type encrypted registered [ 1.104214] AppArmor: AppArmor sha1 policy hashing enabled [ 1.104218] ima: No TPM chip found, activating TPM-bypass! [ 1.104238] evm: HMAC attrs: 0x1 [ 1.104618] Magic number: 4:516:628 [ 1.104730] rtc_cmos 00:02: setting system clock to 2016-02-12 10:36:07 UTC (1455273367) [ 1.104783] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.104784] EDD information not available. [ 1.104872] PM: Hibernation image not present or could not be loaded. [ 1.105957] Freeing unused kernel memory: 1472K (ffffffff81f40000 - ffffffff820b0000) [ 1.105958] Write protecting the kernel read-only data: 14336k [ 1.106402] Freeing unused kernel memory: 1944K (ffff88000281a000 - ffff880002a00000) [ 1.106855] Freeing unused kernel memory: 184K (ffff880002dd2000 - ffff880002e00000) [ 1.118286] random: systemd-udevd urandom read with 9 bits of entropy available [ 1.129769] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.143161] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED [ 1.145875] hidraw: raw HID events driver (C) Jiri Kosina [ 1.151399] sdhci: Secure Digital Host Controller Interface driver [ 1.151402] sdhci: Copyright(c) Pierre Ossman [ 1.163314] wmi: Mapper loaded [ 1.167742] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 41 [ 1.169577] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.169585] r8169 0000:02:00.1: can't disable ASPM; OS doesn't have ASPM control [ 1.170040] [drm] Initialized drm 1.1.0 20060810 [ 1.170343] ahci 0000:00:1f.2: version 3.0 [ 1.170438] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.175955] r8169 0000:02:00.1 eth0: RTL8411 at 0xffffc90000c96000, 40:16:7e:1e:2f:3d, XID 1c800800 IRQ 43 [ 1.175959] r8169 0000:02:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.182805] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode [ 1.182811] ahci 0000:00:1f.2: flags: 64bit ncq stag led clo only pio slum part deso sadm sds apst [ 1.183575] scsi host0: ahci [ 1.183705] scsi host1: ahci [ 1.183882] scsi host2: ahci [ 1.184114] scsi host3: ahci [ 1.184178] ata1: SATA max UDMA/133 abar m2048@0xf7e22000 port 0xf7e22100 irq 42 [ 1.184181] ata2: SATA max UDMA/133 abar m2048@0xf7e22000 port 0xf7e22180 irq 42 [ 1.184183] ata3: DUMMY [ 1.184184] ata4: DUMMY [ 1.198525] [drm] Memory usable by graphics device = 2048M [ 1.198531] checking generic (e0000000 580000) vs hw (e0000000 10000000) [ 1.198533] fb: switching to inteldrmfb from EFI VGA [ 1.198565] Console: switching to colour dummy device 80x25 [ 1.198652] [drm] Replacing VGA console driver [ 1.202372] r8169 0000:02:00.1 enp2s0f1: renamed from eth0 [ 1.204908] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.204910] [drm] Driver supports precise vblank timestamp query. [ 1.204983] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.232086] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.234493] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 1.234569] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0 [ 1.358933] fbcon: inteldrmfb (fb0) is primary device [ 1.359047] Console: switching to colour frame buffer device 200x56 [ 1.359083] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.390770] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.394778] usb 2-6: new high-speed USB device number 2 using xhci_hcd [ 1.502797] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.509038] ata1.00: ATA-8: ST750LM022 HN-M750MBB, 2BA30001, max UDMA/133 [ 1.509043] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.515351] ata1.00: configured for UDMA/133 [ 1.515595] scsi 0:0:0:0: Direct-Access ATA ST750LM022 HN-M7 0001 PQ: 0 ANSI: 5 [ 1.515912] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 1.515917] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.515933] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.516001] sd 0:0:0:0: [sda] Write Protect is off [ 1.516006] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.516029] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.523093] usb 1-1: New USB device found, idVendor=8087, idProduct=8000 [ 1.523097] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.523377] hub 1-1:1.0: USB hub found [ 1.523444] hub 1-1:1.0: 8 ports detected [ 1.555992] usb 2-6: New USB device found, idVendor=04f2, idProduct=b409 [ 1.555997] usb 2-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 1.556000] usb 2-6: Product: USB2.0 HD UVC WebCam [ 1.556001] usb 2-6: Manufacturer: Chicony Electronics Co.,Ltd. [ 1.556003] usb 2-6: SerialNumber: 0x0001 [ 1.581990] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 [ 1.582906] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.722811] usb 2-7: new full-speed USB device number 3 using xhci_hcd [ 1.835300] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.841532] ata2.00: ATAPI: TSSTcorp CDDVDW SU-228FB, AS00, max UDMA/100 [ 1.846562] ata2.00: configured for UDMA/100 [ 1.850237] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SU-228FB AS00 PQ: 0 ANSI: 5 [ 1.851911] usb 2-7: New USB device found, idVendor=13d3, idProduct=3408 [ 1.851916] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.857239] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x381f0a) [ 1.871919] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e. [ 1.872313] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.872317] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.872495] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.872714] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.885497] psmouse serio4: elantech: Elan sample query result 0b, 16, 75 [ 1.954138] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input12 [ 2.046791] tsc: Refined TSC clocksource calibration: 2296.676 MHz [ 2.046797] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x211af13cfdb, max_idle_ns: 440795310849 ns [ 3.046952] clocksource: Switched to clocksource tsc [ 3.368696] random: nonblocking pool is initialized [ 3.388244] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 4.140340] systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time. [ 4.388060] systemd[1]: Failed to insert module 'kdbus': Function not implemented [ 4.492898] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 4.493054] systemd[1]: Detected architecture x86-64. [ 4.502100] systemd[1]: Set hostname to . [ 5.932008] systemd[1]: Created slice System Slice. [ 5.932327] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 5.932341] systemd[1]: Reached target User and Group Name Lookups. [ 5.932460] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.932490] systemd[1]: Listening on fsck to fsckd communication Socket. [ 5.932499] systemd[1]: Reached target Encrypted Volumes. [ 5.932742] systemd[1]: Created slice system-getty.slice. [ 5.932752] systemd[1]: Reached target Remote File Systems (Pre). [ 5.932758] systemd[1]: Reached target Remote File Systems. [ 5.932787] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 5.932816] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.932850] systemd[1]: Listening on Journal Socket. [ 5.942949] systemd[1]: Mounting POSIX Message Queue File System... [ 6.031099] systemd[1]: Started Read required files in advance. [ 6.032053] systemd[1]: Starting Uncomplicated firewall... [ 6.032574] systemd[1]: Starting Braille Device Support... [ 6.033039] systemd[1]: Mounting Debug File System... [ 6.033510] systemd[1]: Mounting Huge Pages File System... [ 6.199127] systemd[1]: Starting Load Kernel Modules... [ 6.215124] systemd[1]: Listening on Process Core Dump Socket. [ 6.215166] systemd[1]: Listening on udev Kernel Socket. [ 6.215270] systemd[1]: Listening on Journal Audit Socket. [ 6.215315] systemd[1]: Listening on udev Control Socket. [ 6.215346] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.216049] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 6.216094] systemd[1]: Listening on Syslog Socket. [ 6.216735] systemd[1]: Starting Journal Service... [ 6.216993] systemd[1]: Created slice User and Session Slice. [ 6.217010] systemd[1]: Reached target Slices. [ 6.308452] systemd[1]: Started Uncomplicated firewall. [ 6.448802] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 6.463175] systemd[1]: Starting Create Static Device Nodes in /dev... [ 6.511360] systemd[1]: Mounted Huge Pages File System. [ 6.511396] systemd[1]: Mounted POSIX Message Queue File System. [ 6.511415] systemd[1]: Mounted Debug File System. [ 6.971739] systemd[1]: Started Braille Device Support. [ 7.005420] systemd[1]: Started Journal Service. [ 7.023734] lp: driver loaded but no devices found [ 7.036367] ppdev: user-space parallel port driver [ 7.999433] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro [ 8.198270] systemd-journald[252]: Received request to flush runtime journal from PID 1 [ 8.634527] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.576221] Bluetooth: Core ver 2.21 [ 9.576236] NET: Registered protocol family 31 [ 9.576237] Bluetooth: HCI device and connection manager initialized [ 9.576240] Bluetooth: HCI socket layer initialized [ 9.576242] Bluetooth: L2CAP socket layer initialized [ 9.576247] Bluetooth: SCO socket layer initialized [ 9.813451] usbcore: registered new interface driver btusb [ 9.817964] ath: phy0: WB335 2-ANT card detected [ 9.817968] ath: phy0: Set BT/WLAN RX diversity capability [ 9.824664] ath: phy0: Enable LNA combining [ 9.825855] ath: phy0: ASPM enabled: 0x42 [ 9.825858] ath: EEPROM regdomain: 0x60 [ 9.825859] ath: EEPROM indicates we should expect a direct regpair map [ 9.825862] ath: Country alpha2 being used: 00 [ 9.825863] ath: Regpair used: 0x60 [ 9.927123] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 9.927493] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc90001600000, irq=19 [ 9.968633] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0 [ 9.995063] asus_wmi: ASUS WMI generic driver loaded [ 10.006136] asus_wmi: Initialization: 0x1 [ 10.006169] asus_wmi: BIOS WMI version: 7.9 [ 10.006204] asus_wmi: SFUN value: 0x4a0877 [ 10.007067] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input13 [ 10.007372] asus_wmi: Number of fans: 1 [ 10.192736] AVX2 version of gcm_enc/dec engaged. [ 10.192740] AES CTR mode by8 optimization enabled [ 10.239486] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 10.384518] usbcore: registered new interface driver ath3k [ 10.384556] usb 2-7: USB disconnect, device number 3 [ 10.456963] media: Linux media interface: v0.10 [ 10.489810] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3236: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 10.489813] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 10.489816] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 10.489818] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 10.489820] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 10.489823] snd_hda_codec_realtek hdaudioC1D0: Mic=0x1b [ 10.536333] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14 [ 10.633930] Linux video capture interface: v2.00 [ 10.655056] usb 2-7: new full-speed USB device number 4 using xhci_hcd [ 10.866548] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15 [ 10.866601] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16 [ 10.866646] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17 [ 11.121343] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b409) [ 11.122432] input: USB2.0 HD UVC WebCam as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/input/input18 [ 11.122502] usbcore: registered new interface driver uvcvideo [ 11.122504] USB Video Class driver (1.1.1) [ 11.131954] intel_rapl: Found RAPL domain package [ 11.131960] intel_rapl: Found RAPL domain core [ 11.131964] intel_rapl: Found RAPL domain uncore [ 11.131968] intel_rapl: Found RAPL domain dram [ 11.131973] intel_rapl: RAPL package 0 domain package locked by BIOS [ 11.131981] intel_rapl: RAPL package 0 domain dram locked by BIOS [ 11.810536] cfg80211: World regulatory domain updated: [ 11.810541] cfg80211: DFS Master region: unset [ 11.810543] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 11.810546] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 11.810549] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 11.810550] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 11.810553] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 11.810555] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 11.810557] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 11.810558] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 11.810560] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 12.375154] Adding 7811068k swap on /dev/sda8. Priority:-1 extents:1 across:7811068k FS [ 15.784240] usb 2-7: New USB device found, idVendor=13d3, idProduct=3408 [ 15.784244] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 18.134867] audit: type=1400 audit(1455273351.141:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=639 comm="apparmor_parser" [ 18.134879] audit: type=1400 audit(1455273351.141:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=639 comm="apparmor_parser" [ 18.165421] audit: type=1400 audit(1455273351.173:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=639 comm="apparmor_parser" [ 18.165431] audit: type=1400 audit(1455273351.173:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=639 comm="apparmor_parser" [ 18.165436] audit: type=1400 audit(1455273351.173:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-nesting" pid=639 comm="apparmor_parser" [ 18.189505] audit: type=1400 audit(1455273351.197:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=639 comm="apparmor_parser" [ 18.189515] audit: type=1400 audit(1455273351.197:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=639 comm="apparmor_parser" [ 18.189521] audit: type=1400 audit(1455273351.197:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=639 comm="apparmor_parser" [ 18.189526] audit: type=1400 audit(1455273351.197:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=639 comm="apparmor_parser" [ 18.207136] audit: type=1400 audit(1455273351.213:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=639 comm="apparmor_parser" [ 19.387471] cgroup: new mount options do not match the existing superblock, will be ignored [ 23.887113] rfkill: input handler disabled [ 24.556572] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 24.556576] Bluetooth: BNEP filters: protocol multicast [ 24.556581] Bluetooth: BNEP socket layer initialized [ 25.346867] cgroup: new mount options do not match the existing superblock, will be ignored [ 25.500433] Bluetooth: RFCOMM TTY layer initialized [ 25.500440] Bluetooth: RFCOMM socket layer initialized [ 25.500447] Bluetooth: RFCOMM ver 1.11 [ 27.594230] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 27.606065] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 27.607402] IPv6: ADDRCONF(NETDEV_UP): enp2s0f1: link is not ready [ 27.757895] r8169 0000:02:00.1 enp2s0f1: link down [ 27.757981] IPv6: ADDRCONF(NETDEV_UP): enp2s0f1: link is not ready [ 28.603286] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 29.576155] wlp3s0: authenticate with 28:28:5d:6a:7c:ca [ 29.587996] wlp3s0: send auth to 28:28:5d:6a:7c:ca (try 1/3) [ 29.589923] wlp3s0: authenticated [ 29.591610] wlp3s0: associate with 28:28:5d:6a:7c:ca (try 1/3) [ 29.595615] wlp3s0: RX AssocResp from 28:28:5d:6a:7c:ca (capab=0x411 status=0 aid=5) [ 29.595707] wlp3s0: associated [ 29.595741] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 29.598591] ath: EEPROM regdomain: 0x8283 [ 29.598594] ath: EEPROM indicates we should expect a country code [ 29.598595] ath: doing EEPROM country->regdmn map search [ 29.598596] ath: country maps to regdmn code: 0x3 [ 29.598597] ath: Country alpha2 being used: RU [ 29.598597] ath: Regpair used: 0x3 [ 29.598599] ath: regdomain 0x8283 dynamically updated by country IE [ 29.598614] cfg80211: Regulatory domain changed to country: RU [ 29.598615] cfg80211: DFS Master region: ETSI [ 29.598616] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 29.598618] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 29.598619] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 29.598620] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s) [ 29.598621] cfg80211: (5650000 KHz - 5730000 KHz @ 40000 KHz), (N/A, 3000 mBm), (0 s) [ 29.598622] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A) [ 29.598623] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 35.372727] ip_tables: (C) 2000-2006 Netfilter Core Team [ 35.481936] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 35.768962] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 36.088888] audit_printk_skb: 66 callbacks suppressed [ 36.088902] audit: type=1400 audit(1455273369.097:34): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/lxc-start" pid=1413 comm="apparmor_parser" [ 36.092673] audit: type=1400 audit(1455273369.101:35): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default" pid=1416 comm="apparmor_parser" [ 36.092691] audit: type=1400 audit(1455273369.101:36): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default-with-mounting" pid=1416 comm="apparmor_parser" [ 36.092696] audit: type=1400 audit(1455273369.101:37): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default-with-nesting" pid=1416 comm="apparmor_parser" [ 167.892668] cfg80211: World regulatory domain updated: [ 167.892672] cfg80211: DFS Master region: unset [ 167.892673] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 167.892676] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 167.892677] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 167.892678] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 167.892680] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 167.892682] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 167.892684] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 167.892685] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 167.892686] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 168.923433] wlp3s0: authenticate with 28:28:5d:6a:7c:ca [ 168.939282] wlp3s0: send auth to 28:28:5d:6a:7c:ca (try 1/3) [ 168.946628] wlp3s0: authenticated [ 168.949011] wlp3s0: associate with 28:28:5d:6a:7c:ca (try 1/3) [ 168.952981] wlp3s0: RX AssocResp from 28:28:5d:6a:7c:ca (capab=0x411 status=0 aid=5) [ 168.953091] wlp3s0: associated [ 168.959636] ath: EEPROM regdomain: 0x8283 [ 168.959643] ath: EEPROM indicates we should expect a country code [ 168.959646] ath: doing EEPROM country->regdmn map search [ 168.959649] ath: country maps to regdmn code: 0x3 [ 168.959652] ath: Country alpha2 being used: RU [ 168.959655] ath: Regpair used: 0x3 [ 168.959658] ath: regdomain 0x8283 dynamically updated by country IE [ 168.959682] cfg80211: Regulatory domain changed to country: RU [ 168.959684] cfg80211: DFS Master region: ETSI [ 168.959687] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 168.959692] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 168.959697] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 168.959701] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s) [ 168.959705] cfg80211: (5650000 KHz - 5730000 KHz @ 40000 KHz), (N/A, 3000 mBm), (0 s) [ 168.959709] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A) [ 168.959713] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 204.869522] cfg80211: World regulatory domain updated: [ 204.869526] cfg80211: DFS Master region: unset [ 204.869527] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 204.869530] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 204.869532] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 204.869533] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 204.869535] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 204.869537] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 204.869539] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 204.869540] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 204.869542] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 211.810463] wlp3s0: authenticate with 28:28:5d:6a:7c:ca [ 211.827440] wlp3s0: send auth to 28:28:5d:6a:7c:ca (try 1/3) [ 211.831298] wlp3s0: authenticated [ 211.833715] wlp3s0: associate with 28:28:5d:6a:7c:ca (try 1/3) [ 211.837749] wlp3s0: RX AssocResp from 28:28:5d:6a:7c:ca (capab=0x411 status=0 aid=5) [ 211.837841] wlp3s0: associated [ 211.841077] ath: EEPROM regdomain: 0x8283 [ 211.841079] ath: EEPROM indicates we should expect a country code [ 211.841081] ath: doing EEPROM country->regdmn map search [ 211.841082] ath: country maps to regdmn code: 0x3 [ 211.841083] ath: Country alpha2 being used: RU [ 211.841084] ath: Regpair used: 0x3 [ 211.841085] ath: regdomain 0x8283 dynamically updated by country IE [ 211.841102] cfg80211: Regulatory domain changed to country: RU [ 211.841103] cfg80211: DFS Master region: ETSI [ 211.841105] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 211.841107] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 211.841108] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 211.841110] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s) [ 211.841111] cfg80211: (5650000 KHz - 5730000 KHz @ 40000 KHz), (N/A, 3000 mBm), (0 s) [ 211.841112] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A) [ 211.841114] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 212.822773] cfg80211: World regulatory domain updated: [ 212.822776] cfg80211: DFS Master region: unset [ 212.822777] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 212.822779] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 212.822781] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 212.822782] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 212.822784] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 212.822785] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 212.822787] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 212.822788] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 212.822789] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 213.870564] wlp3s0: authenticate with 28:28:5d:6a:7c:ca [ 213.887267] wlp3s0: send auth to 28:28:5d:6a:7c:ca (try 1/3) [ 213.890850] wlp3s0: authenticated [ 213.893650] wlp3s0: associate with 28:28:5d:6a:7c:ca (try 1/3) [ 213.933987] wlp3s0: RX AssocResp from 28:28:5d:6a:7c:ca (capab=0x411 status=0 aid=5) [ 213.934065] wlp3s0: associated [ 213.936861] ath: EEPROM regdomain: 0x8283 [ 213.936863] ath: EEPROM indicates we should expect a country code [ 213.936865] ath: doing EEPROM country->regdmn map search [ 213.936866] ath: country maps to regdmn code: 0x3 [ 213.936867] ath: Country alpha2 being used: RU [ 213.936867] ath: Regpair used: 0x3 [ 213.936869] ath: regdomain 0x8283 dynamically updated by country IE [ 213.936885] cfg80211: Regulatory domain changed to country: RU [ 213.936886] cfg80211: DFS Master region: ETSI [ 213.936887] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 213.936889] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 213.936890] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 213.936892] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s) [ 213.936893] cfg80211: (5650000 KHz - 5730000 KHz @ 40000 KHz), (N/A, 3000 mBm), (0 s) [ 213.936894] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A) [ 213.936895] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 225.880693] cfg80211: World regulatory domain updated: [ 225.880697] cfg80211: DFS Master region: unset [ 225.880698] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 225.880700] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 225.880702] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 225.880703] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 225.880705] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 225.880707] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 225.880708] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 225.880709] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 225.880711] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 226.912223] wlp3s0: authenticate with 28:28:5d:6a:7c:ca [ 226.927456] wlp3s0: send auth to 28:28:5d:6a:7c:ca (try 1/3) [ 226.931821] wlp3s0: authenticated [ 226.933258] wlp3s0: associate with 28:28:5d:6a:7c:ca (try 1/3) [ 226.939587] wlp3s0: RX AssocResp from 28:28:5d:6a:7c:ca (capab=0x411 status=0 aid=5) [ 226.939682] wlp3s0: associated [ 226.945381] ath: EEPROM regdomain: 0x8283 [ 226.945386] ath: EEPROM indicates we should expect a country code [ 226.945389] ath: doing EEPROM country->regdmn map search [ 226.945391] ath: country maps to regdmn code: 0x3 [ 226.945393] ath: Country alpha2 being used: RU [ 226.945395] ath: Regpair used: 0x3 [ 226.945398] ath: regdomain 0x8283 dynamically updated by country IE [ 226.945423] cfg80211: Regulatory domain changed to country: RU [ 226.945425] cfg80211: DFS Master region: ETSI [ 226.945428] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 226.945432] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 226.945435] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 226.945438] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s) [ 226.945441] cfg80211: (5650000 KHz - 5730000 KHz @ 40000 KHz), (N/A, 3000 mBm), (0 s) [ 226.945443] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A) [ 226.945446] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 430.879678] cfg80211: World regulatory domain updated: [ 430.879681] cfg80211: DFS Master region: unset [ 430.879682] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 430.879684] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 430.879685] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 430.879686] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 430.879688] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 430.879689] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 430.879691] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 430.879692] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 430.879693] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 437.865746] wlp3s0: authenticate with 28:28:5d:6a:7c:ca [ 437.882167] wlp3s0: send auth to 28:28:5d:6a:7c:ca (try 1/3) [ 437.886548] wlp3s0: authenticated [ 437.888348] wlp3s0: associate with 28:28:5d:6a:7c:ca (try 1/3) [ 437.892779] wlp3s0: RX AssocResp from 28:28:5d:6a:7c:ca (capab=0x411 status=0 aid=5) [ 437.892863] wlp3s0: associated [ 437.895806] ath: EEPROM regdomain: 0x8283 [ 437.895808] ath: EEPROM indicates we should expect a country code [ 437.895810] ath: doing EEPROM country->regdmn map search [ 437.895811] ath: country maps to regdmn code: 0x3 [ 437.895812] ath: Country alpha2 being used: RU [ 437.895812] ath: Regpair used: 0x3 [ 437.895814] ath: regdomain 0x8283 dynamically updated by country IE [ 437.895831] cfg80211: Regulatory domain changed to country: RU [ 437.895832] cfg80211: DFS Master region: ETSI [ 437.895833] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 437.895835] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 437.895836] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 437.895837] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s) [ 437.895839] cfg80211: (5650000 KHz - 5730000 KHz @ 40000 KHz), (N/A, 3000 mBm), (0 s) [ 437.895840] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A) [ 437.895841] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 790.892353] cfg80211: World regulatory domain updated: [ 790.892355] cfg80211: DFS Master region: unset [ 790.892357] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 790.892358] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 790.892360] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 790.892361] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 790.892362] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 790.892364] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 790.892365] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 790.892366] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 790.892367] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 803.847994] wlp3s0: authenticate with 28:28:5d:6a:7c:ca [ 803.863987] wlp3s0: send auth to 28:28:5d:6a:7c:ca (try 1/3) [ 803.925024] wlp3s0: send auth to 28:28:5d:6a:7c:ca (try 2/3) [ 804.011499] wlp3s0: send auth to 28:28:5d:6a:7c:ca (try 3/3) [ 804.072429] wlp3s0: authentication with 28:28:5d:6a:7c:ca timed out [ 806.100521] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 831.024465] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 838.859613] wlp3s0: authenticate with 28:28:5d:6a:7c:ca [ 838.876507] wlp3s0: send auth to 28:28:5d:6a:7c:ca (try 1/3) [ 838.921324] wlp3s0: send auth to 28:28:5d:6a:7c:ca (try 2/3) [ 838.970101] wlp3s0: send auth to 28:28:5d:6a:7c:ca (try 3/3) [ 839.051006] wlp3s0: authentication with 28:28:5d:6a:7c:ca timed out [ 840.976639] wlp3s0: authenticate with 28:28:5d:6a:7c:ca [ 840.992750] wlp3s0: send auth to 28:28:5d:6a:7c:ca (try 1/3) [ 841.030368] wlp3s0: send auth to 28:28:5d:6a:7c:ca (try 2/3) [ 841.078939] wlp3s0: send auth to 28:28:5d:6a:7c:ca (try 3/3) [ 841.143647] wlp3s0: authentication with 28:28:5d:6a:7c:ca timed out [ 852.980056] wlp3s0: authenticate with 28:28:5d:6a:7c:ca [ 852.996998] wlp3s0: send auth to 28:28:5d:6a:7c:ca (try 1/3) [ 853.082773] wlp3s0: send auth to 28:28:5d:6a:7c:ca (try 2/3) [ 853.141055] wlp3s0: send auth to 28:28:5d:6a:7c:ca (try 3/3) [ 853.199886] wlp3s0: authentication with 28:28:5d:6a:7c:ca timed out [ 856.026170] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 869.841052] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 869.876942] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 870.843335] wlp3s0: authenticate with 28:28:5d:6a:7c:ca [ 870.855252] wlp3s0: send auth to 28:28:5d:6a:7c:ca (try 1/3) [ 870.862763] wlp3s0: authenticated [ 870.863772] wlp3s0: associate with 28:28:5d:6a:7c:ca (try 1/3) [ 870.867844] wlp3s0: RX AssocResp from 28:28:5d:6a:7c:ca (capab=0x411 status=0 aid=5) [ 870.867922] wlp3s0: associated [ 870.867945] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 870.870753] ath: EEPROM regdomain: 0x8283 [ 870.870756] ath: EEPROM indicates we should expect a country code [ 870.870757] ath: doing EEPROM country->regdmn map search [ 870.870758] ath: country maps to regdmn code: 0x3 [ 870.870759] ath: Country alpha2 being used: RU [ 870.870760] ath: Regpair used: 0x3 [ 870.870761] ath: regdomain 0x8283 dynamically updated by country IE [ 870.870777] cfg80211: Regulatory domain changed to country: RU [ 870.870778] cfg80211: DFS Master region: ETSI [ 870.870779] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 870.870781] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 870.870783] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 870.870784] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s) [ 870.870785] cfg80211: (5650000 KHz - 5730000 KHz @ 40000 KHz), (N/A, 3000 mBm), (0 s) [ 870.870786] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A) [ 870.870788] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)