[ 0.000000] microcode: microcode updated early to revision 0x7, date = 2018-04-23 [ 0.000000] Linux version 5.3.0-46-generic (buildd@lcy01-amd64-013) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #38~18.04.1-Ubuntu SMP Tue Mar 31 04:17:56 UTC 2020 (Ubuntu 5.3.0-46.38~18.04.1-generic 5.3.18) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.3.0-46-generic root=UUID=35f065a1-29da-4be8-896a-ed1ace85e367 ro quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf27bfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf27c000-0x00000000bf281fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf282000-0x00000000bf35efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf35f000-0x00000000bf370fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf371000-0x00000000bf3f1fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf3f2000-0x00000000bf40efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf40f000-0x00000000bf46efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf46f000-0x00000000bf667fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf668000-0x00000000bf6e7fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf6e8000-0x00000000bf70efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf70f000-0x00000000bf716fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf717000-0x00000000bf71efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf71f000-0x00000000bf76afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf76b000-0x00000000bf776fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf777000-0x00000000bf779fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bf77a000-0x00000000bf780fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf781000-0x00000000bf781fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bf782000-0x00000000bf78afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf78b000-0x00000000bf78bfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bf78c000-0x00000000bf79efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf79f000-0x00000000bf7fefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feaff000-0x00000000feafffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000023bffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: LENOVO 2924BV6/2924BV6, BIOS 6UET70WW (1.50 ) 10/11/2012 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2527.098 MHz processor [ 0.005168] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.005170] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.005181] last_pfn = 0x23c000 max_arch_pfn = 0x400000000 [ 0.005186] MTRR default type: uncachable [ 0.005187] MTRR fixed ranges enabled: [ 0.005188] 00000-9FFFF write-back [ 0.005189] A0000-BFFFF uncachable [ 0.005190] C0000-FFFFF write-protect [ 0.005190] MTRR variable ranges enabled: [ 0.005191] 0 disabled [ 0.005192] 1 base 000000000 mask F80000000 write-back [ 0.005193] 2 base 080000000 mask FC0000000 write-back [ 0.005194] 3 base 100000000 mask F00000000 write-back [ 0.005195] 4 base 200000000 mask FC0000000 write-back [ 0.005196] 5 base 23C000000 mask FFC000000 uncachable [ 0.005197] 6 disabled [ 0.005197] 7 disabled [ 0.005786] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.005946] total RAM covered: 8128M [ 0.006617] Found optimal setting for mtrr clean up [ 0.006618] gran_size: 64K chunk_size: 128M num_reg: 5 lose cover RAM: 0G [ 0.007111] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved [ 0.007118] last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.013132] found SMP MP-table at [mem 0x000f68e0-0x000f68ef] [ 0.018795] check: Scanning 1 areas for low memory corruption [ 0.018804] BRK [0x15ae01000, 0x15ae01fff] PGTABLE [ 0.018806] BRK [0x15ae02000, 0x15ae02fff] PGTABLE [ 0.018807] BRK [0x15ae03000, 0x15ae03fff] PGTABLE [ 0.018868] BRK [0x15ae04000, 0x15ae04fff] PGTABLE [ 0.018869] BRK [0x15ae05000, 0x15ae05fff] PGTABLE [ 0.019064] BRK [0x15ae06000, 0x15ae06fff] PGTABLE [ 0.019079] BRK [0x15ae07000, 0x15ae07fff] PGTABLE [ 0.019123] BRK [0x15ae08000, 0x15ae08fff] PGTABLE [ 0.019243] BRK [0x15ae09000, 0x15ae09fff] PGTABLE [ 0.019329] BRK [0x15ae0a000, 0x15ae0afff] PGTABLE [ 0.019571] RAMDISK: [mem 0x2ffc1000-0x33fd7fff] [ 0.019582] ACPI: Early table checksum verification disabled [ 0.019587] ACPI: RSDP 0x00000000000F68A0 000024 (v02 LENOVO) [ 0.019590] ACPI: XSDT 0x00000000BF7EF1FE 00009C (v01 LENOVO TP-6U 00001500 LTP 00000000) [ 0.019597] ACPI: FACP 0x00000000BF7EF300 0000F4 (v04 LENOVO TP-6U 00001500 LNVO 00000001) [ 0.019602] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20190703/tbfadt-569) [ 0.019604] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20190703/tbfadt-674) [ 0.019608] ACPI: DSDT 0x00000000BF7EF6D1 00F432 (v01 LENOVO TP-6U 00001500 MSFT 03000001) [ 0.019611] ACPI: FACS 0x00000000BF6E7000 000040 [ 0.019614] ACPI: FACS 0x00000000BF6E7000 000040 [ 0.019616] ACPI: SSDT 0x00000000BF7EF4B4 00021D (v01 LENOVO TP-6U 00001500 MSFT 03000001) [ 0.019620] ACPI: ECDT 0x00000000BF7FEB03 000052 (v01 LENOVO TP-6U 00001500 LNVO 00000001) [ 0.019623] ACPI: APIC 0x00000000BF7FEB55 000084 (v01 LENOVO TP-6U 00001500 LNVO 00000001) [ 0.019626] ACPI: MCFG 0x00000000BF7FEC11 00003C (v01 LENOVO TP-6U 00001500 LNVO 00000001) [ 0.019629] ACPI: HPET 0x00000000BF7FEC4D 000038 (v01 LENOVO TP-6U 00001500 LNVO 00000001) [ 0.019632] ACPI: ASF! 0x00000000BF7FEDBE 0000A4 (v16 LENOVO TP-6U 00001500 PTL 00000001) [ 0.019635] ACPI: SLIC 0x00000000BF7FEE62 000176 (v01 LENOVO TP-6U 00001500 LTP 00000000) [ 0.019638] ACPI: BOOT 0x00000000BF7FEFD8 000028 (v01 LENOVO TP-6U 00001500 LTP 00000001) [ 0.019641] ACPI: SSDT 0x00000000BF6E591A 00084B (v01 LENOVO TP-6U 00001500 INTL 20050513) [ 0.019645] ACPI: TCPA 0x00000000BF78B000 000032 (v02 PTL CRESTLN 06040000 00005A52) [ 0.019648] ACPI: DMAR 0x00000000BF781000 000080 (v01 INTEL CP_DALE 00000001 INTL 00000001) [ 0.019651] ACPI: SSDT 0x00000000BF779000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20060912) [ 0.019654] ACPI: SSDT 0x00000000BF778000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20060912) [ 0.019657] ACPI: SSDT 0x00000000BF777000 00049F (v01 PmRef ApTst 00003000 INTL 20060912) [ 0.019669] ACPI: Local APIC address 0xfee00000 [ 0.019793] No NUMA configuration found [ 0.019794] Faking a node at [mem 0x0000000000000000-0x000000023bffffff] [ 0.019805] NODE_DATA(0) allocated [mem 0x23bfd1000-0x23bffbfff] [ 0.020093] Zone ranges: [ 0.020094] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.020095] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.020096] Normal [mem 0x0000000100000000-0x000000023bffffff] [ 0.020097] Device empty [ 0.020098] Movable zone start for each node [ 0.020101] Early memory node ranges [ 0.020101] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.020102] node 0: [mem 0x0000000000100000-0x00000000bf27bfff] [ 0.020104] node 0: [mem 0x00000000bf282000-0x00000000bf35efff] [ 0.020104] node 0: [mem 0x00000000bf40f000-0x00000000bf46efff] [ 0.020105] node 0: [mem 0x00000000bf70f000-0x00000000bf716fff] [ 0.020105] node 0: [mem 0x00000000bf71f000-0x00000000bf76afff] [ 0.020106] node 0: [mem 0x00000000bf7ff000-0x00000000bf7fffff] [ 0.020107] node 0: [mem 0x0000000100000000-0x00000001fbffffff] [ 0.020108] node 0: [mem 0x0000000200000000-0x000000023bffffff] [ 0.020505] Zeroed struct page in unavailable ranges: 35925 pages [ 0.020508] Initmem setup node 0 [mem 0x0000000000001000-0x000000023bffffff] [ 0.020511] On node 0 totalpages: 2061227 [ 0.020512] DMA zone: 64 pages used for memmap [ 0.020513] DMA zone: 21 pages reserved [ 0.020514] DMA zone: 3997 pages, LIFO batch:0 [ 0.020581] DMA32 zone: 12177 pages used for memmap [ 0.020582] DMA32 zone: 779278 pages, LIFO batch:63 [ 0.034296] Normal zone: 20224 pages used for memmap [ 0.034298] Normal zone: 1277952 pages, LIFO batch:63 [ 0.054200] ACPI: PM-Timer IO Port: 0x1008 [ 0.054204] ACPI: Local APIC address 0xfee00000 [ 0.054214] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.054214] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.054215] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.054216] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.054231] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.054233] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.054235] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.054237] ACPI: IRQ0 used by override. [ 0.054238] ACPI: IRQ9 used by override. [ 0.054240] Using ACPI (MADT) for SMP configuration information [ 0.054242] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.054249] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.054292] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.054294] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.054295] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.054295] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff] [ 0.054296] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff] [ 0.054298] PM: Registered nosave memory: [mem 0xbf27c000-0xbf281fff] [ 0.054300] PM: Registered nosave memory: [mem 0xbf35f000-0xbf370fff] [ 0.054301] PM: Registered nosave memory: [mem 0xbf371000-0xbf3f1fff] [ 0.054301] PM: Registered nosave memory: [mem 0xbf3f2000-0xbf40efff] [ 0.054303] PM: Registered nosave memory: [mem 0xbf46f000-0xbf667fff] [ 0.054304] PM: Registered nosave memory: [mem 0xbf668000-0xbf6e7fff] [ 0.054304] PM: Registered nosave memory: [mem 0xbf6e8000-0xbf70efff] [ 0.054306] PM: Registered nosave memory: [mem 0xbf717000-0xbf71efff] [ 0.054309] PM: Registered nosave memory: [mem 0xbf76b000-0xbf776fff] [ 0.054309] PM: Registered nosave memory: [mem 0xbf777000-0xbf779fff] [ 0.054310] PM: Registered nosave memory: [mem 0xbf77a000-0xbf780fff] [ 0.054310] PM: Registered nosave memory: [mem 0xbf781000-0xbf781fff] [ 0.054311] PM: Registered nosave memory: [mem 0xbf782000-0xbf78afff] [ 0.054311] PM: Registered nosave memory: [mem 0xbf78b000-0xbf78bfff] [ 0.054312] PM: Registered nosave memory: [mem 0xbf78c000-0xbf79efff] [ 0.054313] PM: Registered nosave memory: [mem 0xbf79f000-0xbf7fefff] [ 0.054315] PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff] [ 0.054315] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff] [ 0.054316] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.054317] PM: Registered nosave memory: [mem 0xf0000000-0xfeafefff] [ 0.054317] PM: Registered nosave memory: [mem 0xfeaff000-0xfeafffff] [ 0.054318] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff] [ 0.054318] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff] [ 0.054319] PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff] [ 0.054319] PM: Registered nosave memory: [mem 0xfed00000-0xfed1bfff] [ 0.054320] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff] [ 0.054321] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff] [ 0.054321] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.054322] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.054322] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.054324] PM: Registered nosave memory: [mem 0x1fc000000-0x1ffffffff] [ 0.054327] [mem 0xc0000000-0xdfffffff] available for PCI devices [ 0.054328] Booting paravirtualized kernel on bare hardware [ 0.054332] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.054341] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.054737] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288 [ 0.054747] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152 [ 0.054748] pcpu-alloc: [0] 0 1 2 3 [ 0.054792] Built 1 zonelists, mobility grouping on. Total pages: 2028741 [ 0.054793] Policy zone: Normal [ 0.054794] Kernel command line: BOOT_IMAGE=/vmlinuz-5.3.0-46-generic root=UUID=35f065a1-29da-4be8-896a-ed1ace85e367 ro quiet splash vt.handoff=1 [ 0.056128] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.056753] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.056818] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.066654] Calgary: detecting Calgary via BIOS EBDA area [ 0.066656] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.098737] Memory: 7935772K/8244908K available (14339K kernel code, 2369K rwdata, 4664K rodata, 2660K init, 5076K bss, 309136K reserved, 0K cma-reserved) [ 0.098748] random: get_random_u64 called from __kmem_cache_create+0x41/0x540 with crng_init=0 [ 0.098924] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.098939] Kernel/User page tables isolation: enabled [ 0.098959] ftrace: allocating 43282 entries in 170 pages [ 0.118121] rcu: Hierarchical RCU implementation. [ 0.118124] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.118125] Tasks RCU enabled. [ 0.118126] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.118126] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.122309] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ 0.122663] vt handoff: transparent VT on vt#1 [ 0.122673] Console: colour dummy device 80x25 [ 0.122681] printk: console [tty0] enabled [ 0.122699] ACPI: Core revision 20190703 [ 0.122847] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.122867] APIC: Switch to symmetric I/O mode setup [ 0.122870] DMAR: Host address width 36 [ 0.122871] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.122876] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020e30272 ecap 1000 [ 0.122877] DMAR: DRHD base: 0x000000fed93000 flags: 0x1 [ 0.122879] DMAR: dmar1: reg_base_addr fed93000 ver 1:0 cap c9008020630272 ecap 1000 [ 0.122880] DMAR: RMRR base: 0x000000bf6e9000 end: 0x000000bf6fffff [ 0.123458] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.142866] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x246d3854039, max_idle_ns: 440795317725 ns [ 0.142871] Calibrating delay loop (skipped), value calculated using timer frequency.. 5054.19 BogoMIPS (lpj=10108392) [ 0.142874] pid_max: default: 32768 minimum: 301 [ 0.142905] LSM: Security Framework initializing [ 0.142915] Yama: becoming mindful. [ 0.142948] AppArmor: AppArmor initialized [ 0.143005] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.143029] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.143213] *** VALIDATE proc *** [ 0.143275] *** VALIDATE cgroup1 *** [ 0.143276] *** VALIDATE cgroup2 *** [ 0.143334] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.143343] process: using mwait in idle threads [ 0.143347] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 0.143347] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.143350] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.143352] Spectre V2 : Mitigation: Full generic retpoline [ 0.143353] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.143353] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.143355] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.143355] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.143356] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.143360] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.143527] Freeing SMP alternatives memory: 40K [ 0.255330] smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz (family: 0x6, model: 0x25, stepping: 0x5) [ 0.255449] Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver. [ 0.255456] core: CPUID marked event: 'bus cycles' unavailable [ 0.255457] ... version: 3 [ 0.255457] ... bit width: 48 [ 0.255458] ... generic registers: 4 [ 0.255458] ... value mask: 0000ffffffffffff [ 0.255459] ... max period: 000000007fffffff [ 0.255459] ... fixed-purpose events: 3 [ 0.255460] ... event mask: 000000070000000f [ 0.255502] rcu: Hierarchical SRCU implementation. [ 0.256479] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.256551] smp: Bringing up secondary CPUs ... [ 0.256680] x86: Booting SMP configuration: [ 0.256681] .... node #0, CPUs: #1 [ 0.258987] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.259047] #2 #3 [ 0.265271] smp: Brought up 1 node, 4 CPUs [ 0.265271] smpboot: Max logical packages: 1 [ 0.265271] smpboot: Total of 4 processors activated (20216.78 BogoMIPS) [ 0.267306] devtmpfs: initialized [ 0.267306] x86/mm: Memory block size: 128MB [ 0.267785] PM: Registering ACPI NVS region [mem 0xbf371000-0xbf3f1fff] (528384 bytes) [ 0.267785] PM: Registering ACPI NVS region [mem 0xbf668000-0xbf6e7fff] (524288 bytes) [ 0.267785] PM: Registering ACPI NVS region [mem 0xbf76b000-0xbf776fff] (49152 bytes) [ 0.267785] PM: Registering ACPI NVS region [mem 0xbf77a000-0xbf780fff] (28672 bytes) [ 0.267785] PM: Registering ACPI NVS region [mem 0xbf782000-0xbf78afff] (36864 bytes) [ 0.267785] PM: Registering ACPI NVS region [mem 0xbf78c000-0xbf79efff] (77824 bytes) [ 0.267785] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.267785] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.267785] pinctrl core: initialized pinctrl subsystem [ 0.267785] PM: RTC time: 11:58:50, date: 2020-04-27 [ 0.267785] NET: Registered protocol family 16 [ 0.267785] audit: initializing netlink subsys (disabled) [ 0.267785] audit: type=2000 audit(1587988730.144:1): state=initialized audit_enabled=0 res=1 [ 0.267785] EISA bus registered [ 0.267785] cpuidle: using governor ladder [ 0.267785] cpuidle: using governor menu [ 0.267785] Simple Boot Flag at 0x35 set to 0x1 [ 0.267785] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.267785] ACPI: bus type PCI registered [ 0.267785] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.267785] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.267785] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.267785] PCI: Using configuration type 1 for base access [ 0.272210] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.275001] ACPI: Added _OSI(Module Device) [ 0.275002] ACPI: Added _OSI(Processor Device) [ 0.275002] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.275003] ACPI: Added _OSI(Processor Aggregator Device) [ 0.275004] ACPI: Added _OSI(Linux-Dell-Video) [ 0.275005] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.275006] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.291209] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.291989] ACPI: EC: EC started [ 0.291990] ACPI: EC: interrupt blocked [ 0.292898] ACPI: \: Used as first EC [ 0.292899] ACPI: \: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.292900] ACPI: EC: Boot ECDT EC used to handle transactions [ 0.293211] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.303523] ACPI: Dynamic OEM Table Load: [ 0.303530] ACPI: SSDT 0xFFFF9248F2135800 0004B1 (v01 PmRef Cpu0Ist 00003000 INTL 20060912) [ 0.307620] ACPI: Dynamic OEM Table Load: [ 0.307625] ACPI: SSDT 0xFFFF9248F2136800 0006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20060912) [ 0.309088] ACPI: Dynamic OEM Table Load: [ 0.309093] ACPI: SSDT 0xFFFF9248F1C4D800 000303 (v01 PmRef ApIst 00003000 INTL 20060912) [ 0.309977] ACPI: Dynamic OEM Table Load: [ 0.309981] ACPI: SSDT 0xFFFF9248F219A600 000119 (v01 PmRef ApCst 00003000 INTL 20060912) [ 0.312727] ACPI: Interpreter enabled [ 0.312751] ACPI: (supports S0 S3 S4 S5) [ 0.312752] ACPI: Using IOAPIC for interrupt routing [ 0.312781] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.313399] ACPI: Enabled 5 GPEs in block 00 to 3F [ 0.320600] ACPI: Power Resource [PUBS] (on) [ 0.320769] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1) [ 0.322455] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2) [ 0.326526] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.326680] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.326797] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.326958] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.327110] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.327263] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.327379] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.327532] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.327628] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff]) [ 0.327633] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.327698] PCI host bridge to bus 0000:ff [ 0.327700] pci_bus 0000:ff: root bus resource [bus ff] [ 0.327709] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000 [ 0.327767] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000 [ 0.327818] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000 [ 0.327859] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000 [ 0.327901] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000 [ 0.327942] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000 [ 0.328019] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.328022] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.328362] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PCIeCapability LTR] [ 0.328529] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.328531] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.328532] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER] [ 0.328534] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 0.328780] PCI host bridge to bus 0000:00 [ 0.328782] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.328783] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.328785] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.328786] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.328787] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.328788] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.328789] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.328790] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.328798] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000 [ 0.328818] pci 0000:00:00.0: DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics [ 0.328889] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400 [ 0.328928] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.329047] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000 [ 0.329081] pci 0000:00:16.0: reg 0x10: [mem 0xf2327800-0xf232780f 64bit] [ 0.329174] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.329269] pci 0000:00:16.3: [8086:3b67] type 00 class 0x070002 [ 0.329294] pci 0000:00:16.3: reg 0x10: [io 0x1800-0x1807] [ 0.329305] pci 0000:00:16.3: reg 0x14: [mem 0xf2324000-0xf2324fff] [ 0.329486] pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000 [ 0.329512] pci 0000:00:19.0: reg 0x10: [mem 0xf2300000-0xf231ffff] [ 0.329523] pci 0000:00:19.0: reg 0x14: [mem 0xf2325000-0xf2325fff] [ 0.329534] pci 0000:00:19.0: reg 0x18: [io 0x1820-0x183f] [ 0.329616] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.329709] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320 [ 0.329735] pci 0000:00:1a.0: reg 0x10: [mem 0xf2328000-0xf23283ff] [ 0.329837] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.329933] pci 0000:00:1b.0: [8086:3b57] type 00 class 0x040300 [ 0.329964] pci 0000:00:1b.0: reg 0x10: [mem 0xf2320000-0xf2323fff 64bit] [ 0.330075] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.330173] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400 [ 0.330296] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.330398] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400 [ 0.330522] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.330628] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400 [ 0.330749] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.330861] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320 [ 0.330892] pci 0000:00:1d.0: reg 0x10: [mem 0xf2328400-0xf23287ff] [ 0.330995] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.331086] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.331245] pci 0000:00:1f.0: [8086:3b0f] type 00 class 0x060100 [ 0.331433] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601 [ 0.331460] pci 0000:00:1f.2: reg 0x10: [io 0x1818-0x181f] [ 0.331470] pci 0000:00:1f.2: reg 0x14: [io 0x180c-0x180f] [ 0.331480] pci 0000:00:1f.2: reg 0x18: [io 0x1810-0x1817] [ 0.331490] pci 0000:00:1f.2: reg 0x1c: [io 0x1808-0x180b] [ 0.331501] pci 0000:00:1f.2: reg 0x20: [io 0x1840-0x185f] [ 0.331511] pci 0000:00:1f.2: reg 0x24: [mem 0xf2327000-0xf23277ff] [ 0.331570] pci 0000:00:1f.2: PME# supported from D3hot [ 0.331660] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500 [ 0.331686] pci 0000:00:1f.3: reg 0x10: [mem 0xf2328800-0xf23288ff 64bit] [ 0.331715] pci 0000:00:1f.3: reg 0x20: [io 0x1860-0x187f] [ 0.331823] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000 [ 0.331853] pci 0000:00:1f.6: reg 0x10: [mem 0xf2326000-0xf2326fff 64bit] [ 0.332062] pci 0000:01:00.0: [10de:0a6c] type 00 class 0x030000 [ 0.332085] pci 0000:01:00.0: reg 0x10: [mem 0xcc000000-0xccffffff] [ 0.332097] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.332110] pci 0000:01:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref] [ 0.332118] pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f] [ 0.332127] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.332134] pci 0000:01:00.0: enabling Extended Tags [ 0.332219] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:01.0 (capable of 64.000 Gb/s with 5 GT/s x16 link) [ 0.332379] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300 [ 0.332399] pci 0000:01:00.1: reg 0x10: [mem 0xcdefc000-0xcdefffff] [ 0.332447] pci 0000:01:00.1: enabling Extended Tags [ 0.332579] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.332581] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.332583] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xcdefffff] [ 0.332586] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref] [ 0.332634] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.332727] pci 0000:03:00.0: [8086:4239] type 00 class 0x028000 [ 0.332787] pci 0000:03:00.0: reg 0x10: [mem 0xf2000000-0xf2001fff 64bit] [ 0.332997] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.333132] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.333139] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf20fffff] [ 0.333260] pci 0000:05:00.0: [1180:e822] type 00 class 0x080500 [ 0.333284] pci 0000:05:00.0: MMC controller base frequency changed to 50Mhz. [ 0.333315] pci 0000:05:00.0: reg 0x10: [mem 0xf1f00000-0xf1f000ff] [ 0.333498] pci 0000:05:00.0: supports D1 D2 [ 0.333500] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.333687] pci 0000:00:1c.4: PCI bridge to [bus 05-0c] [ 0.333691] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.333695] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf1ffffff] [ 0.333702] pci 0000:00:1c.4: bridge window [mem 0xf2400000-0xf24fffff 64bit pref] [ 0.333725] pci_bus 0000:0e: extended config space not accessible [ 0.333782] pci 0000:00:1e.0: PCI bridge to [bus 0e] (subtractive decode) [ 0.333795] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.333796] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.333797] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.333798] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode) [ 0.333799] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) [ 0.333800] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) [ 0.333802] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode) [ 0.338927] ACPI: EC: interrupt unblocked [ 0.338938] ACPI: EC: event unblocked [ 0.338945] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.338947] ACPI: \_SB_.PCI0.LPC_.EC__: Boot DSDT EC used to handle transactions and events [ 0.339310] SCSI subsystem initialized [ 0.339354] libata version 3.00 loaded. [ 0.339374] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.339374] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.339374] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.339374] vgaarb: loaded [ 0.339374] ACPI: bus type USB registered [ 0.339374] usbcore: registered new interface driver usbfs [ 0.339374] usbcore: registered new interface driver hub [ 0.339374] usbcore: registered new device driver usb [ 0.339374] pps_core: LinuxPPS API ver. 1 registered [ 0.339374] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.339374] PTP clock support registered [ 0.339374] EDAC MC: Ver: 3.0.0 [ 0.339374] PCI: Using ACPI for IRQ routing [ 0.350245] PCI: pci_cache_line_size set to 64 bytes [ 0.350415] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff] [ 0.350417] e820: reserve RAM buffer [mem 0xbf27c000-0xbfffffff] [ 0.350419] e820: reserve RAM buffer [mem 0xbf35f000-0xbfffffff] [ 0.350421] e820: reserve RAM buffer [mem 0xbf46f000-0xbfffffff] [ 0.350423] e820: reserve RAM buffer [mem 0xbf717000-0xbfffffff] [ 0.350424] e820: reserve RAM buffer [mem 0xbf76b000-0xbfffffff] [ 0.350426] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff] [ 0.350559] NetLabel: Initializing [ 0.350560] NetLabel: domain hash size = 128 [ 0.350561] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.350578] NetLabel: unlabeled traffic allowed by default [ 0.351476] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.351481] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.353527] clocksource: Switched to clocksource tsc-early [ 0.366260] VFS: Disk quotas dquot_6.6.0 [ 0.366281] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.366319] *** VALIDATE hugetlbfs *** [ 0.366423] AppArmor: AppArmor Filesystem Enabled [ 0.366462] pnp: PnP ACPI init [ 0.368329] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.368331] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.368332] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.368333] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved [ 0.368335] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved [ 0.368336] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved [ 0.368337] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.368339] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.368340] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.368341] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.368343] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.368344] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.368346] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.368352] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.368819] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.368820] system 00:01: [io 0x1000-0x107f] has been reserved [ 0.368822] system 00:01: [io 0x1180-0x11ff] has been reserved [ 0.368824] system 00:01: [io 0x0800-0x080f] has been reserved [ 0.368825] system 00:01: [io 0x15e0-0x15ef] has been reserved [ 0.368826] system 00:01: [io 0x1600-0x1641] has been reserved [ 0.368828] system 00:01: [io 0x1644-0x167f] could not be reserved [ 0.368830] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 0.368831] system 00:01: [mem 0xfeaff000-0xfeafffff] has been reserved [ 0.368833] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.368834] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.368835] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.368837] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.368838] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.368840] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.368844] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.368916] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.368942] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.368964] pnp 00:04: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active) [ 0.370211] pnp: PnP ACPI: found 5 devices [ 0.371948] thermal_sys: Registered thermal governor 'fair_share' [ 0.371949] thermal_sys: Registered thermal governor 'bang_bang' [ 0.371949] thermal_sys: Registered thermal governor 'step_wise' [ 0.371950] thermal_sys: Registered thermal governor 'user_space' [ 0.371951] thermal_sys: Registered thermal governor 'power_allocator' [ 0.376456] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.376511] pci 0000:01:00.0: BAR 6: assigned [mem 0xcd000000-0xcd07ffff pref] [ 0.376514] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.376517] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.376520] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xcdefffff] [ 0.376522] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref] [ 0.376525] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.376539] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.376544] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf20fffff] [ 0.376555] pci 0000:00:1c.4: PCI bridge to [bus 05-0c] [ 0.376557] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.376563] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf1ffffff] [ 0.376567] pci 0000:00:1c.4: bridge window [mem 0xf2400000-0xf24fffff 64bit pref] [ 0.376575] pci 0000:00:1e.0: PCI bridge to [bus 0e] [ 0.376590] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.376591] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.376592] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.376593] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.376595] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.376596] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.376597] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff window] [ 0.376598] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.376599] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xcdefffff] [ 0.376600] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref] [ 0.376602] pci_bus 0000:03: resource 1 [mem 0xf2000000-0xf20fffff] [ 0.376603] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff] [ 0.376604] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff] [ 0.376605] pci_bus 0000:05: resource 2 [mem 0xf2400000-0xf24fffff 64bit pref] [ 0.376607] pci_bus 0000:0e: resource 4 [io 0x0000-0x0cf7 window] [ 0.376608] pci_bus 0000:0e: resource 5 [io 0x0d00-0xffff window] [ 0.376609] pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.376610] pci_bus 0000:0e: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.376611] pci_bus 0000:0e: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.376612] pci_bus 0000:0e: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.376613] pci_bus 0000:0e: resource 10 [mem 0xc0000000-0xfebfffff window] [ 0.376725] NET: Registered protocol family 2 [ 0.376896] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.376985] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.377231] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.377342] TCP: Hash tables configured (established 65536 bind 65536) [ 0.377407] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.377445] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.377569] NET: Registered protocol family 1 [ 0.377576] NET: Registered protocol family 44 [ 0.378009] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.378025] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.378088] PCI: CLS 64 bytes, default 64 [ 0.378188] Trying to unpack rootfs image as initramfs... [ 1.307804] Freeing initrd memory: 65628K [ 1.326894] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.326897] software IO TLB: mapped [mem 0xbb27c000-0xbf27c000] (64MB) [ 1.327136] check: Scanning for low memory corruption every 60 seconds [ 1.328807] Initialise system trusted keyrings [ 1.328819] Key type blacklist registered [ 1.328860] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 1.330365] zbud: loaded [ 1.330808] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.331002] fuse: init (API version 7.31) [ 1.331132] Platform Keyring initialized [ 1.335740] Key type asymmetric registered [ 1.335742] Asymmetric key parser 'x509' registered [ 1.335753] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 1.335801] io scheduler mq-deadline registered [ 1.336675] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.336745] vesafb: mode is 1280x800x32, linelength=5120, pages=0 [ 1.336746] vesafb: scrolling: redraw [ 1.336748] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.336766] vesafb: framebuffer at 0xcf000000, mapped to 0x(____ptrval____), using 4032k, total 4032k [ 1.336815] fbcon: Deferring console take-over [ 1.336816] fb0: VESA VGA frame buffer device [ 1.336830] intel_idle: MWAIT substates: 0x1120 [ 1.336831] intel_idle: v0.4.1 model 0x25 [ 1.337162] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.337945] ACPI: AC Adapter [AC] (on-line) [ 1.338023] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 1.338038] ACPI: Lid Switch [LID] [ 1.338067] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 1.338076] ACPI: Sleep Button [SLPB] [ 1.338114] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.338121] ACPI: Power Button [PWRF] [ 1.343973] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.343976] ACPI: Thermal Zone [THM0] (48 C) [ 1.344410] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.384234] 0000:00:16.3: ttyS4 at I/O 0x1800 (irq = 17, base_baud = 115200) is a 16550A [ 1.386352] Linux agpgart interface v0.103 [ 1.389734] battery: ACPI: Battery Slot [BAT0] (battery present) [ 1.392747] loop: module loaded [ 1.393216] libphy: Fixed MDIO Bus: probed [ 1.393219] tun: Universal TUN/TAP device driver, 1.6 [ 1.393288] PPP generic driver version 2.4.2 [ 1.393380] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.393386] ehci-pci: EHCI PCI platform driver [ 1.393668] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.393679] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.393699] ehci-pci 0000:00:1a.0: debug port 2 [ 1.397643] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.397668] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf2328000 [ 1.410934] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.411036] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 1.411040] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.411043] usb usb1: Product: EHCI Host Controller [ 1.411045] usb usb1: Manufacturer: Linux 5.3.0-46-generic ehci_hcd [ 1.411048] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.411304] hub 1-0:1.0: USB hub found [ 1.411318] hub 1-0:1.0: 3 ports detected [ 1.411782] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.411791] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.411816] ehci-pci 0000:00:1d.0: debug port 2 [ 1.415772] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.415797] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf2328400 [ 1.430957] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.431034] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 1.431037] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.431039] usb usb2: Product: EHCI Host Controller [ 1.431041] usb usb2: Manufacturer: Linux 5.3.0-46-generic ehci_hcd [ 1.431043] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.431236] hub 2-0:1.0: USB hub found [ 1.431247] hub 2-0:1.0: 3 ports detected [ 1.431483] ehci-platform: EHCI generic platform driver [ 1.431503] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.431511] ohci-pci: OHCI PCI platform driver [ 1.431526] ohci-platform: OHCI generic platform driver [ 1.431537] uhci_hcd: USB Universal Host Controller Interface driver [ 1.431633] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.434806] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.434816] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.435092] mousedev: PS/2 mouse device common for all mice [ 1.435440] rtc_cmos 00:02: RTC can wake from S4 [ 1.435671] rtc_cmos 00:02: registered as rtc0 [ 1.435689] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.435697] i2c /dev entries driver [ 1.435744] device-mapper: uevent: version 1.0.3 [ 1.435827] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com [ 1.435845] platform eisa.0: Probing EISA bus 0 [ 1.435847] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 1.435849] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 1.435850] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 1.435851] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 1.435852] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 1.435853] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 1.435854] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 1.435855] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 1.435856] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 1.435857] platform eisa.0: EISA: Detected 0 cards [ 1.435860] intel_pstate: CPU model not supported [ 1.435949] ledtrig-cpu: registered to indicate activity on CPUs [ 1.436469] NET: Registered protocol family 10 [ 1.438908] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.445849] Segment Routing with IPv6 [ 1.445900] NET: Registered protocol family 17 [ 1.446037] Key type dns_resolver registered [ 1.446858] RAS: Correctable Errors collector initialized. [ 1.446999] microcode: sig=0x20655, pf=0x10, revision=0x7 [ 1.447141] microcode: Microcode Update Driver: v2.2. [ 1.447162] sched_clock: Marking stable (1446863589, 264056)->(1534229390, -87101745) [ 1.447529] registered taskstats version 1 [ 1.447547] Loading compiled-in X.509 certificates [ 1.449479] Loaded X.509 cert 'Build time autogenerated kernel key: 5650732eee8a3c09a605a6628308b9d1fc90aa8a' [ 1.449525] zswap: loaded using pool lzo/zbud [ 1.459557] Key type big_key registered [ 1.462551] Key type encrypted registered [ 1.462554] AppArmor: AppArmor sha1 policy hashing enabled [ 1.462561] ima: No TPM chip found, activating TPM-bypass! [ 1.462566] ima: Allocated hash algorithm: sha1 [ 1.462580] No architecture policies found [ 1.462606] evm: Initialising EVM extended attributes: [ 1.462607] evm: security.selinux [ 1.462608] evm: security.SMACK64 [ 1.462609] evm: security.SMACK64EXEC [ 1.462610] evm: security.SMACK64TRANSMUTE [ 1.462611] evm: security.SMACK64MMAP [ 1.462612] evm: security.apparmor [ 1.462613] evm: security.ima [ 1.462614] evm: security.capability [ 1.462615] evm: HMAC attrs: 0x1 [ 1.463853] PM: Magic number: 0:625:985 [ 1.464071] rtc_cmos 00:02: setting system clock to 2020-04-27T11:58:51 UTC (1587988731) [ 1.469639] random: fast init done [ 1.474626] Freeing unused decrypted memory: 2040K [ 1.475223] Freeing unused kernel image memory: 2660K [ 1.498972] Write protecting the kernel read-only data: 22528k [ 1.499793] Freeing unused kernel image memory: 2008K [ 1.500226] Freeing unused kernel image memory: 1480K [ 1.512249] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.512251] x86/mm: Checking user space page tables [ 1.524015] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.524018] Run /init as init process [ 1.540142] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.540253] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.540258] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.606188] ACPI: Video Device [VID1] (multi-head: yes rom: yes post: no) [ 1.623124] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 1.624357] acpi device:0b: registered as cooling_device4 [ 1.624496] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input5 [ 1.636686] sdhci: Secure Digital Host Controller Interface driver [ 1.636687] sdhci: Copyright(c) Pierre Ossman [ 1.640206] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.640208] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.640233] sdhci-pci 0000:05:00.0: SDHCI controller found [1180:e822] (rev 1) [ 1.640386] ahci 0000:00:1f.2: version 3.0 [ 1.640984] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.641034] sdhci-pci 0000:05:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.641080] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes [ 1.641225] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.641277] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode [ 1.641280] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst [ 1.642211] mmc0: SDHCI controller on PCI [0000:05:00.0] using DMA [ 1.676846] scsi host0: ahci [ 1.677066] scsi host1: ahci [ 1.677237] scsi host2: ahci [ 1.677725] scsi host3: ahci [ 1.677854] scsi host4: ahci [ 1.677983] scsi host5: ahci [ 1.678041] ata1: SATA max UDMA/133 abar m2048@0xf2327000 port 0xf2327100 irq 29 [ 1.678044] ata2: SATA max UDMA/133 abar m2048@0xf2327000 port 0xf2327180 irq 29 [ 1.678045] ata3: DUMMY [ 1.678045] ata4: DUMMY [ 1.678047] ata5: SATA max UDMA/133 abar m2048@0xf2327000 port 0xf2327300 irq 29 [ 1.678050] ata6: SATA max UDMA/133 abar m2048@0xf2327000 port 0xf2327380 irq 29 [ 1.746932] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.775774] usb 1-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00 [ 1.775778] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.776318] hub 1-1:1.0: USB hub found [ 1.776504] hub 1-1:1.0: 6 ports detected [ 1.778887] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.800656] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:31:46:2d [ 1.800658] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.800726] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF [ 1.801651] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 1.807659] usb 2-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00 [ 1.807663] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.808199] hub 2-1:1.0: USB hub found [ 1.808349] hub 2-1:1.0: 8 ports detected [ 1.994401] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.995177] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.995182] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.995185] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 2.051763] ata1.00: ATA-8: TOSHIBA MK2533GSG, QS002E, max UDMA/100 [ 2.051766] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.052907] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 2.052911] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.052913] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 2.053896] ata1.00: configured for UDMA/100 [ 2.054255] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2533GS 2E PQ: 0 ANSI: 5 [ 2.054737] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.054810] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 2.054828] sd 0:0:0:0: [sda] Write Protect is off [ 2.054830] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.054852] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.062987] usb 1-1.2: new full-speed USB device number 3 using ehci-pci [ 2.148942] sda: sda1 sda2 [ 2.149487] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.175355] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01 [ 2.175358] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.175360] usb 1-1.2: Product: USB Receiver [ 2.175362] usb 1-1.2: Manufacturer: Logitech [ 2.181124] hidraw: raw HID events driver (C) Jiri Kosina [ 2.186555] usbcore: registered new interface driver usbhid [ 2.186556] usbhid: USB HID core driver [ 2.189227] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C534.0001/input/input7 [ 2.247314] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input0 [ 2.247589] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C534.0002/input/input8 [ 2.247848] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C534.0002/input/input9 [ 2.254917] usb 1-1.3: new full-speed USB device number 4 using ehci-pci [ 2.307163] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C534.0002/input/input10 [ 2.307414] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input1 [ 2.358926] tsc: Refined TSC clocksource calibration: 2526.999 MHz [ 2.358932] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x246cdab5d1d, max_idle_ns: 440795263955 ns [ 2.358949] clocksource: Switched to clocksource tsc [ 2.359371] logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input0 [ 2.368201] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016, bcdDevice= 0.02 [ 2.368203] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.368204] usb 1-1.3: Product: Biometric Coprocessor [ 2.368205] usb 1-1.3: Manufacturer: UPEK [ 2.370103] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.373417] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 2.373421] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.378759] ata2.00: ATA-10: CT480BX500SSD1, M6CR022, max UDMA/133 [ 2.378762] ata2.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 2.386201] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 2.386205] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.393646] ata2.00: configured for UDMA/133 [ 2.394062] scsi 1:0:0:0: Direct-Access ATA CT480BX500SSD1 R022 PQ: 0 ANSI: 5 [ 2.394522] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.394683] sd 1:0:0:0: [sdb] 937703088 512-byte logical blocks: (480 GB/447 GiB) [ 2.394704] sd 1:0:0:0: [sdb] Write Protect is off [ 2.394706] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.394730] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.395721] sdb: sdb1 sdb2 < sdb5 sdb6 > [ 2.396287] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.439221] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820] [ 2.450930] usb 1-1.4: new full-speed USB device number 5 using ehci-pci [ 2.516925] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 578367 [ 2.516932] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 2.531624] logitech-djreceiver 0003:046D:C534.0002: hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input1 [ 2.565711] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 2.568134] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f, bcdDevice= 3.60 [ 2.568138] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.568141] usb 1-1.4: Product: Broadcom Bluetooth Device [ 2.568143] usb 1-1.4: Manufacturer: Broadcom Corp [ 2.568145] usb 1-1.4: SerialNumber: 889FFAF4B271 [ 2.592927] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2 [ 2.593293] input: Logitech Wireless Mouse PID:4054 Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C534.0002/0003:046D:4054.0003/input/input14 [ 2.593432] hid-generic 0003:046D:4054.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4054] on usb-0000:00:1a.0-1.2/input1:2 [ 2.646937] usb 1-1.6: new high-speed USB device number 6 using ehci-pci [ 2.649201] input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C534.0002/0003:046D:4054.0003/input/input18 [ 2.649437] logitech-hidpp-device 0003:046D:4054.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:00:1a.0-1.2/input1:2 [ 2.689377] usb 1-1.6: New USB device found, idVendor=17ef, idProduct=480d, bcdDevice=23.38 [ 2.689381] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.689384] usb 1-1.6: Product: Integrated Camera [ 2.689386] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd. [ 2.709798] ata5: SATA link down (SStatus 0 SControl 300) [ 3.025985] ata6: SATA link down (SStatus 0 SControl 300) [ 3.302968] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 3.552837] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input13 [ 4.682876] raid6: sse2x4 gen() 9795 MB/s [ 4.730880] raid6: sse2x4 xor() 7450 MB/s [ 4.778876] raid6: sse2x2 gen() 8945 MB/s [ 4.826874] raid6: sse2x2 xor() 6771 MB/s [ 4.874884] raid6: sse2x1 gen() 7487 MB/s [ 4.922875] raid6: sse2x1 xor() 5749 MB/s [ 4.922875] raid6: using algorithm sse2x4 gen() 9795 MB/s [ 4.922876] raid6: .... xor() 7450 MB/s, rmw enabled [ 4.922877] raid6: using ssse3x2 recovery algorithm [ 4.926327] xor: measuring software checksum speed [ 4.962872] prefetch64-sse: 15675.000 MB/sec [ 5.002872] generic_sse: 13444.000 MB/sec [ 5.002873] xor: using function: prefetch64-sse (15675.000 MB/sec) [ 5.024521] Btrfs loaded, crc32c=crc32c-intel [ 5.103848] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null) [ 5.297311] systemd[1]: RTC configured in localtime, applying delta of -240 minutes to system time. [ 5.342268] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 5.359203] systemd[1]: Detected architecture x86-64. [ 5.361075] systemd[1]: Set hostname to . [ 5.587508] systemd[1]: Created slice User and Session Slice. [ 5.587744] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.588057] systemd[1]: Created slice System Slice. [ 5.588153] systemd[1]: Listening on LVM2 metadata daemon socket. [ 5.588228] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.588310] systemd[1]: Listening on Journal Socket. [ 5.590272] systemd[1]: Starting Load Kernel Modules... [ 5.622583] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro [ 5.636698] lp: driver loaded but no devices found [ 5.646439] ppdev: user-space parallel port driver [ 5.661486] vhba: loading out-of-tree module taints kernel. [ 5.661530] vhba: module verification failed: signature and/or required key missing - tainting kernel [ 5.668830] scsi host6: vhba [ 5.713589] ip_local_port_range: prefer different parity for start/end values. [ 5.771735] systemd-journald[430]: Received request to flush runtime journal from PID 1 [ 5.890951] Adding 4095996k swap on /swapfile. Priority:-2 extents:87 across:31563776k SSFS [ 6.379930] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.380292] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000107F (\_SB.PCI0.LPC.PMIO) (20190703/utaddress-213) [ 6.380298] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.380302] ACPI Warning: SystemIO range 0x00000000000011C0-0x00000000000011CF conflicts with OpRegion 0x0000000000001180-0x00000000000011FF (\_SB.PCI0.LPC.LPIO) (20190703/utaddress-213) [ 6.380306] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.380308] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011FF (\_SB.PCI0.LPC.LPIO) (20190703/utaddress-213) [ 6.380311] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.380313] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011FF (\_SB.PCI0.LPC.LPIO) (20190703/utaddress-213) [ 6.380317] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.380318] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 6.393671] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.404668] Non-volatile memory driver v1.3 [ 6.430438] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29) [ 6.430677] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads [ 6.443948] thinkpad_acpi: ThinkPad ACPI Extras v0.26 [ 6.443950] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 6.443951] thinkpad_acpi: ThinkPad BIOS 6UET70WW (1.50 ), EC 6UHT33WW-1.14 [ 6.443952] thinkpad_acpi: Lenovo ThinkPad T410s, model 2924BV6 [ 6.445266] Intel(R) Wireless WiFi driver for Linux [ 6.445268] Copyright(c) 2003- 2015 Intel Corporation [ 6.445567] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 6.446236] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90 [ 6.448036] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2 [ 6.448068] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2 [ 6.450487] nvidia: module license 'NVIDIA' taints kernel. [ 6.450489] Disabling lock debugging due to kernel taint [ 6.450625] iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm [ 6.464041] thinkpad_acpi: radio switch found; radios are enabled [ 6.464070] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 6.464071] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 6.508109] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 6.508113] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 6.508114] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 6.508117] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74 [ 6.510026] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 6.520059] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 6.526212] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 6.530215] thinkpad_acpi: battery 1 registered (start 0, stop 0) [ 6.530221] battery: new extension: ThinkPad Battery Extension [ 6.530275] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input19 [ 6.530545] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0 [ 6.530562] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.108 Wed Dec 11 11:06:58 PST 2019 [ 6.537928] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 6.610062] cryptd: max_cpu_qlen set to 1000 [ 6.627507] snd_hda_intel 0000:01:00.1: Disabling MSI [ 6.627520] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 6.640973] SSE version of gcm_enc/dec engaged. [ 6.651796] snd_hda_codec_conexant hdaudioC0D0: CX20585: BIOS auto-probing. [ 6.652303] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20585: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker [ 6.652305] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.652308] snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x1c/0x19/0x0/0x0/0x0) [ 6.652309] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0 [ 6.652311] snd_hda_codec_conexant hdaudioC0D0: inputs: [ 6.652313] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23 [ 6.652315] snd_hda_codec_conexant hdaudioC0D0: Mic=0x1b [ 6.652317] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x1a [ 6.653663] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication [ 6.656939] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20 [ 6.657031] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21 [ 6.657125] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22 [ 6.657204] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23 [ 6.735442] random: crng init done [ 6.735446] random: 7 urandom warning(s) missed due to ratelimiting [ 6.760636] Bluetooth: Core ver 2.22 [ 6.760662] NET: Registered protocol family 31 [ 6.760663] Bluetooth: HCI device and connection manager initialized [ 6.760669] Bluetooth: HCI socket layer initialized [ 6.760672] Bluetooth: L2CAP socket layer initialized [ 6.760678] Bluetooth: SCO socket layer initialized [ 6.788254] mc: Linux media interface: v0.10 [ 6.828172] videodev: Linux video capture interface: v2.00 [ 6.937749] usbcore: registered new interface driver btusb [ 7.216239] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 7.362006] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:480d) [ 7.367478] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! [ 7.367482] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! [ 7.367484] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! [ 7.367600] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input24 [ 7.367720] usbcore: registered new interface driver uvcvideo [ 7.367721] USB Video Class driver (1.1.1) [ 7.939425] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input25 [ 7.939493] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input26 [ 7.939554] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input27 [ 7.939615] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input28 [ 8.491828] nvidia_uvm: Loaded the UVM driver, major device number 240 [ 8.659663] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0 [ 8.661592] ACPI Warning: \_SB.PCI0.PEG.VID._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20190703/nsarguments-66) [ 8.820050] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than pnp 00:00 [mem 0x000c8000-0x000cbfff] [ 8.820234] caller os_map_kernel_space+0x86/0xb0 [nvidia] mapping multiple BARs [ 9.434550] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 9.477897] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null) [ 9.646369] audit: type=1400 audit(1588003139.677:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=959 comm="apparmor_parser" [ 9.646375] audit: type=1400 audit(1588003139.677:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=959 comm="apparmor_parser" [ 9.646378] audit: type=1400 audit(1588003139.677:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=959 comm="apparmor_parser" [ 9.646382] audit: type=1400 audit(1588003139.677:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=959 comm="apparmor_parser" [ 9.648759] audit: type=1400 audit(1588003139.681:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=962 comm="apparmor_parser" [ 9.648764] audit: type=1400 audit(1588003139.681:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=962 comm="apparmor_parser" [ 9.648768] audit: type=1400 audit(1588003139.681:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=962 comm="apparmor_parser" [ 9.654432] audit: type=1400 audit(1588003139.685:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=958 comm="apparmor_parser" [ 9.654439] audit: type=1400 audit(1588003139.685:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=958 comm="apparmor_parser" [ 9.663247] audit: type=1400 audit(1588003139.697:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=967 comm="apparmor_parser" [ 9.952161] NVRM: Your system is not currently configured to drive a VGA console [ 9.952164] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver [ 9.952165] NVRM: requires the use of a text-mode VGA console. Use of other console [ 9.952166] NVRM: drivers including, but not limited to, vesafb, may result in [ 9.952167] NVRM: corruption and stability problems, and is not supported. [ 10.040633] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 10.040636] Bluetooth: BNEP filters: protocol multicast [ 10.040643] Bluetooth: BNEP socket layer initialized [ 10.915450] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1 [ 10.993739] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than pnp 00:00 [mem 0x000c8000-0x000cbfff] [ 10.993908] caller os_map_kernel_space+0x86/0xb0 [nvidia] mapping multiple BARs [ 11.087280] vboxdrv: Found 4 processor cores [ 11.112751] vboxdrv: TSC mode is Invariant, tentative frequency 2526998414 Hz [ 11.112753] vboxdrv: Successfully loaded version 6.1.6 (interface 0x002d0001) [ 11.151835] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1 [ 11.159105] aufs 4.x-rcN-20190805 [ 11.329035] VBoxNetFlt: Successfully started. [ 11.338538] VBoxNetAdp: Successfully started. [ 14.565516] wlp3s0: authenticate with 34:2c:c4:b8:81:a2 [ 14.607103] wlp3s0: send auth to 34:2c:c4:b8:81:a2 (try 1/3) [ 14.611201] wlp3s0: authenticated [ 14.614911] wlp3s0: associate with 34:2c:c4:b8:81:a2 (try 1/3) [ 14.635510] wlp3s0: RX AssocResp from 34:2c:c4:b8:81:a2 (capab=0x1411 status=0 aid=5) [ 14.639029] wlp3s0: associated [ 14.703056] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 34:2c:c4:b8:81:a2 [ 14.822084] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 17.116110] kauditd_printk_skb: 29 callbacks suppressed [ 17.116111] audit: type=1400 audit(1588003147.149:41): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=3118 comm="apparmor_parser" [ 17.149782] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 17.151821] Bridge firewalling registered [ 17.161331] bpfilter: Loaded bpfilter_umh pid 3140 [ 17.234531] Initializing XFRM netlink socket [ 17.630757] Bluetooth: RFCOMM TTY layer initialized [ 17.630767] Bluetooth: RFCOMM socket layer initialized [ 17.630776] Bluetooth: RFCOMM ver 1.11 [ 29.984961] rfkill: input handler disabled [ 209.450890] perf: interrupt took too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 79500 [ 239.659197] audit: type=1400 audit(1588003369.693:42): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=28097 comm="apparmor_parser" [ 239.659909] audit: type=1400 audit(1588003369.693:43): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=28097 comm="apparmor_parser" [ 239.687407] audit: type=1400 audit(1588003369.721:44): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=28097 comm="apparmor_parser" [ 254.998884] perf: interrupt took too long (3148 > 3138), lowering kernel.perf_event_max_sample_rate to 63500 [ 1077.204427] perf: interrupt took too long (3937 > 3935), lowering kernel.perf_event_max_sample_rate to 50750 [ 1515.949200] perf: interrupt took too long (4923 > 4921), lowering kernel.perf_event_max_sample_rate to 40500 [ 1621.825100] wlp3s0: deauthenticating from 34:2c:c4:b8:81:a2 by local choice (Reason: 3=DEAUTH_LEAVING) [ 1621.935421] PM: suspend entry (deep) [ 1621.980837] Filesystems sync: 0.045 seconds [ 1623.495349] Freezing user space processes ... (elapsed 0.003 seconds) done. [ 1623.498805] OOM killer disabled. [ 1623.498806] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 1623.500344] printk: Suspending console(s) (use no_console_suspend to debug) [ 1623.679028] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 1623.679093] sd 1:0:0:0: [sdb] Stopping disk [ 1623.679125] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1623.679212] sd 0:0:0:0: [sda] Stopping disk [ 1623.710681] e1000e: EEE TX LPI TIMER: 00000000 [ 1623.831031] ACPI: EC: interrupt blocked [ 1623.851321] ACPI: Preparing to enter system sleep state S3 [ 1623.862806] ACPI: EC: event blocked [ 1623.862807] ACPI: EC: EC stopped [ 1623.862808] PM: Saving platform NVS memory [ 1623.862830] Disabling non-boot CPUs ... [ 1623.863346] IRQ 31: no longer affine to CPU1 [ 1623.864496] smpboot: CPU 1 is now offline [ 1623.868905] IRQ 33: no longer affine to CPU2 [ 1623.869939] smpboot: CPU 2 is now offline [ 1623.874983] IRQ 19: no longer affine to CPU3 [ 1623.876021] smpboot: CPU 3 is now offline [ 1623.881695] ACPI: Low-level resume complete [ 1623.881757] ACPI: EC: EC started [ 1623.881758] PM: Restoring platform NVS memory [ 1623.882529] Enabling non-boot CPUs ... [ 1623.882608] x86: Booting SMP configuration: [ 1623.882608] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 1623.888233] CPU1 is up [ 1623.888287] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 1623.894226] CPU2 is up [ 1623.894278] smpboot: Booting Node 0 Processor 3 APIC 0x5 [ 1623.900117] CPU3 is up [ 1623.902336] ACPI: Waking up from system sleep state S3 [ 1623.918464] ACPI: EC: interrupt unblocked [ 1623.936677] sdhci-pci 0000:05:00.0: MMC controller base frequency changed to 50Mhz. [ 1623.938539] ACPI: EC: event unblocked [ 1623.941319] sd 0:0:0:0: [sda] Starting disk [ 1623.945690] sd 1:0:0:0: [sdb] Starting disk [ 1624.196152] usb 1-1.2: reset full-speed USB device number 3 using ehci-pci [ 1624.294482] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1624.294551] ata6: SATA link down (SStatus 0 SControl 300) [ 1624.294631] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1624.294663] ata5: SATA link down (SStatus 0 SControl 300) [ 1624.295498] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1624.295500] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1624.295501] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1624.297964] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1624.297967] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1624.311160] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1624.311164] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1624.318554] ata2.00: configured for UDMA/133 [ 1624.344562] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1624.344564] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1624.344565] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1624.345345] ata1.00: configured for UDMA/100 [ 1624.384122] usb 1-1.3: reset full-speed USB device number 4 using ehci-pci [ 1624.472113] sdhci-pci 0000:05:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [ 1624.576186] usb 1-1.4: reset full-speed USB device number 5 using ehci-pci [ 1624.655726] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820] [ 1624.768168] usb 1-1.6: reset high-speed USB device number 6 using ehci-pci [ 1624.802370] OOM killer enabled. [ 1624.802371] Restarting tasks ... [ 1624.842688] rfkill: input handler enabled [ 1624.856220] done. [ 1624.896791] video LNXVIDEO:01: Restoring backlight state [ 1624.896900] PM: suspend exit [ 1624.908708] rfkill: input handler disabled [ 1625.176329] e1000e: enp0s25 NIC Link is Down [ 1625.384078] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1 [ 1625.620198] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1 [ 1627.544687] rfkill: input handler enabled [ 1628.930992] wlp3s0: authenticate with 34:2c:c4:b8:81:a2 [ 1628.932058] wlp3s0: send auth to 34:2c:c4:b8:81:a2 (try 1/3) [ 1628.934688] wlp3s0: authenticated [ 1628.936223] wlp3s0: associate with 34:2c:c4:b8:81:a2 (try 1/3) [ 1628.958527] wlp3s0: RX AssocResp from 34:2c:c4:b8:81:a2 (capab=0x1411 status=0 aid=5) [ 1628.962791] wlp3s0: associated [ 1629.018636] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 34:2c:c4:b8:81:a2 [ 1629.457495] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 1640.475999] gala[10705]: segfault at 0 ip 0000000000000000 sp 00007ffd9d62eb88 error 14 in .gltMGtas (deleted)[402b3000+2000] [ 1640.476012] Code: Bad RIP value. [ 1641.390585] gala[25946]: segfault at 0 ip 0000000000000000 sp 00007ffec0bf04b8 error 14 in .gl9QUsyX (deleted)[4044a000+2000] [ 1641.390596] Code: Bad RIP value. [ 1665.035275] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than pnp 00:00 [mem 0x000c8000-0x000cbfff] [ 1665.035459] caller os_map_kernel_space+0x86/0xb0 [nvidia] mapping multiple BARs [ 1675.273505] rfkill: input handler disabled [ 2978.601663] perf: interrupt took too long (6159 > 6153), lowering kernel.perf_event_max_sample_rate to 32250 [ 5428.456130] wlp3s0: deauthenticating from 34:2c:c4:b8:81:a2 by local choice (Reason: 3=DEAUTH_LEAVING) [ 5428.542139] PM: suspend entry (deep) [ 5428.584123] Filesystems sync: 0.041 seconds [ 5430.105653] Freezing user space processes ... (elapsed 0.003 seconds) done. [ 5430.109026] OOM killer disabled. [ 5430.109027] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5430.110604] printk: Suspending console(s) (use no_console_suspend to debug) [ 5430.284136] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 5430.284203] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 5430.284234] sd 1:0:0:0: [sdb] Stopping disk [ 5430.284276] sd 0:0:0:0: [sda] Stopping disk [ 5430.319940] e1000e: EEE TX LPI TIMER: 00000000 [ 5433.449678] ACPI: EC: interrupt blocked [ 5433.472368] ACPI: Preparing to enter system sleep state S3 [ 5433.482947] ACPI: EC: event blocked [ 5433.482947] ACPI: EC: EC stopped [ 5433.482948] PM: Saving platform NVS memory [ 5433.482969] Disabling non-boot CPUs ... [ 5433.483407] IRQ 31: no longer affine to CPU1 [ 5433.484417] smpboot: CPU 1 is now offline [ 5433.487871] IRQ 33: no longer affine to CPU2 [ 5433.489100] smpboot: CPU 2 is now offline [ 5433.492578] IRQ 19: no longer affine to CPU3 [ 5433.493592] smpboot: CPU 3 is now offline [ 5433.497512] ACPI: Low-level resume complete [ 5433.497576] ACPI: EC: EC started [ 5433.497577] PM: Restoring platform NVS memory [ 5433.498312] Enabling non-boot CPUs ... [ 5433.498391] x86: Booting SMP configuration: [ 5433.498392] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 5433.503926] CPU1 is up [ 5433.503982] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 5433.509620] CPU2 is up [ 5433.509668] smpboot: Booting Node 0 Processor 3 APIC 0x5 [ 5433.515084] CPU3 is up [ 5433.517414] ACPI: Waking up from system sleep state S3 [ 5433.533064] ACPI: EC: interrupt unblocked [ 5433.553587] sdhci-pci 0000:05:00.0: MMC controller base frequency changed to 50Mhz. [ 5433.558423] ACPI: EC: event unblocked [ 5433.561575] sd 0:0:0:0: [sda] Starting disk [ 5433.561636] sd 1:0:0:0: [sdb] Starting disk [ 5433.817259] usb 1-1.2: reset full-speed USB device number 3 using ehci-pci [ 5433.907678] ata5: SATA link down (SStatus 0 SControl 300) [ 5433.907748] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5433.907806] ata6: SATA link down (SStatus 0 SControl 300) [ 5433.907876] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5433.908724] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 5433.908726] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 5433.908727] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 5433.910882] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 5433.910886] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 5433.924236] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 5433.924238] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 5433.931627] ata2.00: configured for UDMA/133 [ 5433.960441] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 5433.960444] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 5433.960445] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 5433.961229] ata1.00: configured for UDMA/100 [ 5434.005227] usb 1-1.4: reset full-speed USB device number 5 using ehci-pci [ 5434.073256] sdhci-pci 0000:05:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [ 5434.193278] usb 1-1.6: reset high-speed USB device number 6 using ehci-pci [ 5434.268351] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820] [ 5434.301258] usb 1-1.3: reset full-speed USB device number 4 using ehci-pci [ 5435.258025] OOM killer enabled. [ 5435.258027] Restarting tasks ... done. [ 5435.285516] rfkill: input handler enabled [ 5435.340083] video LNXVIDEO:01: Restoring backlight state [ 5435.340184] PM: suspend exit [ 5435.355444] rfkill: input handler disabled [ 5435.601267] e1000e: enp0s25 NIC Link is Down [ 5435.809065] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1 [ 5436.045497] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1 [ 5439.239190] wlp3s0: authenticate with 34:2c:c4:b8:81:a2 [ 5439.255895] wlp3s0: send auth to 34:2c:c4:b8:81:a2 (try 1/3) [ 5439.261384] wlp3s0: authenticated [ 5439.265241] wlp3s0: associate with 34:2c:c4:b8:81:a2 (try 1/3) [ 5439.282759] wlp3s0: RX AssocResp from 34:2c:c4:b8:81:a2 (capab=0x1411 status=0 aid=5) [ 5439.286804] wlp3s0: associated [ 5439.296997] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 34:2c:c4:b8:81:a2 [ 5439.580878] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 5439.599826] rfkill: input handler enabled [ 5447.297803] rfkill: input handler disabled [23138.756914] usb 1-1.1: new high-speed USB device number 7 using ehci-pci [23138.786876] usb 1-1.1: New USB device found, idVendor=1004, idProduct=631c, bcdDevice= 2.16 [23138.786881] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [23138.786884] usb 1-1.1: Product: LGE Android Phone [23138.786886] usb 1-1.1: Manufacturer: LGE [23138.786888] usb 1-1.1: SerialNumber: LGK43079OJAUYT [23222.204185] SUPR0GipMap: fGetGipCpu=0x1b [23224.013904] vboxdrv: 0000000000000000 VMMR0.r0 [23224.239695] vboxdrv: 0000000000000000 VBoxDDR0.r0 [23224.465646] vboxdrv: 0000000000000000 VBoxEhciR0.r0 [23224.469845] VMMR0InitVM: eflags=246 fKernelFeatures=0x0 (SUPKERNELFEATURES_SMAP=0) [23697.192794] usb 1-1.1: reset high-speed USB device number 7 using ehci-pci [23697.492797] usb 1-1.1: reset high-speed USB device number 7 using ehci-pci [23715.556795] usb 1-1.1: reset high-speed USB device number 7 using ehci-pci [23715.868798] usb 1-1.1: reset high-speed USB device number 7 using ehci-pci [24358.625425] usb 1-1.1: USB disconnect, device number 7 [24360.640826] usb 1-1.1: new high-speed USB device number 8 using ehci-pci [24360.673459] usb 1-1.1: New USB device found, idVendor=1004, idProduct=6000, bcdDevice= 1.00 [24360.673464] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [24360.673467] usb 1-1.1: Product: MT67xx Preloader [24360.746554] cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device [24360.748363] usbcore: registered new interface driver cdc_acm [24360.748365] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [24360.749890] usbcore: registered new interface driver usbserial_generic [24360.749906] usbserial: USB Serial support registered for generic [24360.758735] usbcore: registered new interface driver qcaux [24360.758748] usbserial: USB Serial support registered for qcaux [24360.758771] qcaux 1-1.1:1.2: qcaux converter detected [24360.758879] usb 1-1.1: qcaux converter now attached to ttyUSB0 [24363.204792] qcaux ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71 [24363.233056] usb 1-1.1: USB disconnect, device number 8 [24363.235270] cdc_acm 1-1.1:1.0: failed to set dtr/rts [24363.264476] qcaux ttyUSB0: qcaux converter now disconnected from ttyUSB0 [24363.264496] qcaux 1-1.1:1.2: device disconnected [24383.940844] usb 1-1.1: new high-speed USB device number 9 using ehci-pci [24383.970710] usb 1-1.1: New USB device found, idVendor=1004, idProduct=633a, bcdDevice= 2.16 [24383.970715] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [24383.970718] usb 1-1.1: Product: LGE Android Phone [24383.970720] usb 1-1.1: Manufacturer: LGE [24383.970723] usb 1-1.1: SerialNumber: LGK43079OJAUYT [24383.971956] cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device [24812.001538] usb 1-1.1: USB disconnect, device number 9 [24815.300844] usb 1-1.1: new high-speed USB device number 10 using ehci-pci [24815.331764] usb 1-1.1: New USB device found, idVendor=1004, idProduct=633a, bcdDevice= 2.16 [24815.331768] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [24815.331771] usb 1-1.1: Product: LGE Android Phone [24815.331774] usb 1-1.1: Manufacturer: LGE [24815.331776] usb 1-1.1: SerialNumber: LGK43079OJAUYT [24815.335232] cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device [24824.801280] usb 1-1.1: USB disconnect, device number 10 [24824.803582] cdc_acm 1-1.1:1.0: failed to set dtr/rts [24826.816855] usb 1-1.1: new high-speed USB device number 11 using ehci-pci [24826.850029] usb 1-1.1: New USB device found, idVendor=1004, idProduct=6000, bcdDevice= 1.00 [24826.850033] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [24826.850036] usb 1-1.1: Product: MT67xx Preloader [24826.852514] cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device [24826.853708] qcaux 1-1.1:1.2: qcaux converter detected [24826.853869] usb 1-1.1: qcaux converter now attached to ttyUSB0 [24828.897229] usb 1-1.1: USB disconnect, device number 11 [24828.899449] cdc_acm 1-1.1:1.0: failed to set dtr/rts [24828.931296] qcaux ttyUSB0: qcaux converter now disconnected from ttyUSB0 [24828.931316] qcaux 1-1.1:1.2: device disconnected [24834.496798] usb 1-1.1: new high-speed USB device number 12 using ehci-pci [24834.526785] usb 1-1.1: New USB device found, idVendor=1004, idProduct=631c, bcdDevice= 2.16 [24834.526790] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [24834.526794] usb 1-1.1: Product: LGE Android Phone [24834.526797] usb 1-1.1: Manufacturer: LGE [24834.526799] usb 1-1.1: SerialNumber: LGK43079OJAUYT [24841.953815] usb 1-1.1: USB disconnect, device number 12 [24848.068823] usb 1-1.1: new high-speed USB device number 13 using ehci-pci [24848.101933] usb 1-1.1: New USB device found, idVendor=1004, idProduct=6000, bcdDevice= 1.00 [24848.101937] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [24848.101940] usb 1-1.1: Product: MT67xx Preloader [24848.104455] cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device [24848.105814] qcaux 1-1.1:1.2: qcaux converter detected [24848.105995] usb 1-1.1: qcaux converter now attached to ttyUSB0 [24850.554617] qcaux ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71 [24850.654618] qcaux ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71 [24850.657250] usb 1-1.1: USB disconnect, device number 13 [24850.659498] cdc_acm 1-1.1:1.0: failed to set dtr/rts [24850.700464] qcaux ttyUSB0: qcaux converter now disconnected from ttyUSB0 [24850.700501] qcaux 1-1.1:1.2: device disconnected [24856.516784] usb 1-1.1: new high-speed USB device number 14 using ehci-pci [24856.546793] usb 1-1.1: New USB device found, idVendor=1004, idProduct=631c, bcdDevice= 2.16 [24856.546798] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [24856.546801] usb 1-1.1: Product: LGE Android Phone [24856.546804] usb 1-1.1: Manufacturer: LGE [24856.546806] usb 1-1.1: SerialNumber: LGK43079OJAUYT [24864.481418] usb 1-1.1: USB disconnect, device number 14 [24878.284806] usb 1-1.1: new high-speed USB device number 15 using ehci-pci [24878.314831] usb 1-1.1: New USB device found, idVendor=1004, idProduct=633a, bcdDevice= 2.16 [24878.314835] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [24878.314839] usb 1-1.1: Product: LGE Android Phone [24878.314841] usb 1-1.1: Manufacturer: LGE [24878.314844] usb 1-1.1: SerialNumber: LGK43079OJAUYT [24878.316204] cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device [24920.545391] usb 1-1.1: USB disconnect, device number 15 [24920.547649] cdc_acm 1-1.1:1.0: failed to set dtr/rts [24963.012801] usb 1-1.1: new high-speed USB device number 16 using ehci-pci [24963.044585] usb 1-1.1: New USB device found, idVendor=1004, idProduct=6000, bcdDevice= 1.00 [24963.044591] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [24963.044595] usb 1-1.1: Product: MT67xx Preloader [24963.048577] cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device [24963.050019] qcaux 1-1.1:1.2: qcaux converter detected [24963.050157] usb 1-1.1: qcaux converter now attached to ttyUSB0 [24965.498525] qcaux ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71 [24965.598540] qcaux ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71 [24965.601305] usb 1-1.1: USB disconnect, device number 16 [24965.603512] cdc_acm 1-1.1:1.0: failed to set dtr/rts [24965.637868] qcaux ttyUSB0: qcaux converter now disconnected from ttyUSB0 [24965.637908] qcaux 1-1.1:1.2: device disconnected [24971.456809] usb 1-1.1: new high-speed USB device number 17 using ehci-pci [24971.486821] usb 1-1.1: New USB device found, idVendor=1004, idProduct=631c, bcdDevice= 2.16 [24971.486825] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [24971.486828] usb 1-1.1: Product: LGE Android Phone [24971.486831] usb 1-1.1: Manufacturer: LGE [24971.486833] usb 1-1.1: SerialNumber: LGK43079OJAUYT [24979.681453] usb 1-1.1: USB disconnect, device number 17 [25023.168815] usb 1-1.1: new high-speed USB device number 18 using ehci-pci [25023.198890] usb 1-1.1: New USB device found, idVendor=1004, idProduct=633a, bcdDevice= 2.16 [25023.198895] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [25023.198898] usb 1-1.1: Product: LGE Android Phone [25023.198901] usb 1-1.1: Manufacturer: LGE [25023.198903] usb 1-1.1: SerialNumber: LGK43079OJAUYT [25023.200123] cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device [25027.041509] usb 1-1.1: USB disconnect, device number 18 [25027.043827] cdc_acm 1-1.1:1.0: failed to set dtr/rts [25049.280835] usb 1-1.1: new high-speed USB device number 19 using ehci-pci [25049.312482] usb 1-1.1: New USB device found, idVendor=1004, idProduct=6000, bcdDevice= 1.00 [25049.312486] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [25049.312489] usb 1-1.1: Product: MT67xx Preloader [25049.315569] cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device [25049.316357] qcaux 1-1.1:1.2: qcaux converter detected [25049.316483] usb 1-1.1: qcaux converter now attached to ttyUSB0 [25051.765807] qcaux ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71 [25051.865822] qcaux ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71 [25051.873321] usb 1-1.1: USB disconnect, device number 19 [25051.875554] cdc_acm 1-1.1:1.0: failed to set dtr/rts [25051.909369] qcaux ttyUSB0: qcaux converter now disconnected from ttyUSB0 [25051.909396] qcaux 1-1.1:1.2: device disconnected [25057.732825] usb 1-1.1: new high-speed USB device number 20 using ehci-pci [25057.762870] usb 1-1.1: New USB device found, idVendor=1004, idProduct=631c, bcdDevice= 2.16 [25057.762874] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [25057.762876] usb 1-1.1: Product: LGE Android Phone [25057.762878] usb 1-1.1: Manufacturer: LGE [25057.762880] usb 1-1.1: SerialNumber: LGK43079OJAUYT [26018.017826] usb 1-1.1: USB disconnect, device number 20 [26025.664756] usb 1-1.1: new high-speed USB device number 21 using ehci-pci [26025.698025] usb 1-1.1: New USB device found, idVendor=1004, idProduct=6000, bcdDevice= 1.00 [26025.698030] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [26025.698033] usb 1-1.1: Product: MT67xx Preloader [26025.700631] cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device [26025.701776] qcaux 1-1.1:1.2: qcaux converter detected [26025.701953] usb 1-1.1: qcaux converter now attached to ttyUSB0 [26028.150212] qcaux ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71 [26028.250210] qcaux ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71 [26028.257708] usb 1-1.1: USB disconnect, device number 21 [26028.259929] cdc_acm 1-1.1:1.0: failed to set dtr/rts [26028.294924] qcaux ttyUSB0: qcaux converter now disconnected from ttyUSB0 [26028.294963] qcaux 1-1.1:1.2: device disconnected [26034.112821] usb 1-1.1: new high-speed USB device number 22 using ehci-pci [26034.142889] usb 1-1.1: New USB device found, idVendor=1004, idProduct=631c, bcdDevice= 2.16 [26034.142893] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [26034.142896] usb 1-1.1: Product: LGE Android Phone [26034.142898] usb 1-1.1: Manufacturer: LGE [26034.142900] usb 1-1.1: SerialNumber: LGK43079OJAUYT [26198.754402] usb 1-1.1: USB disconnect, device number 22 [26207.680796] usb 1-1.1: new high-speed USB device number 23 using ehci-pci [26207.711706] usb 1-1.1: New USB device found, idVendor=1004, idProduct=633a, bcdDevice= 2.16 [26207.711710] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [26207.711712] usb 1-1.1: Product: LGE Android Phone [26207.711714] usb 1-1.1: Manufacturer: LGE [26207.711716] usb 1-1.1: SerialNumber: LGK43079OJAUYT [26207.713464] cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device [26248.673799] usb 1-1.1: USB disconnect, device number 23 [26248.676112] cdc_acm 1-1.1:1.0: failed to set dtr/rts [26250.688758] usb 1-1.1: new high-speed USB device number 24 using ehci-pci [26250.725733] usb 1-1.1: New USB device found, idVendor=1004, idProduct=6000, bcdDevice= 1.00 [26250.725737] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [26250.725740] usb 1-1.1: Product: MT67xx Preloader [26250.728368] cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device [26250.729495] qcaux 1-1.1:1.2: qcaux converter detected [26250.729672] usb 1-1.1: qcaux converter now attached to ttyUSB0 [26253.179425] qcaux ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71 [26253.279422] qcaux ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71 [26253.281785] usb 1-1.1: USB disconnect, device number 24 [26253.284040] cdc_acm 1-1.1:1.0: failed to set dtr/rts [26253.325038] qcaux ttyUSB0: qcaux converter now disconnected from ttyUSB0 [26253.325078] qcaux 1-1.1:1.2: device disconnected [26258.888802] usb 1-1.1: new high-speed USB device number 25 using ehci-pci [26258.922828] usb 1-1.1: New USB device found, idVendor=1004, idProduct=631c, bcdDevice= 2.16 [26258.922832] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [26258.922835] usb 1-1.1: Product: LGE Android Phone [26258.922838] usb 1-1.1: Manufacturer: LGE [26258.922841] usb 1-1.1: SerialNumber: LGK43079OJAUYT [26269.410251] usb 1-1.1: USB disconnect, device number 25 [26278.336740] usb 1-1.1: new high-speed USB device number 26 using ehci-pci [26278.369617] usb 1-1.1: New USB device found, idVendor=1004, idProduct=6000, bcdDevice= 1.00 [26278.369621] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [26278.369624] usb 1-1.1: Product: MT67xx Preloader [26278.372383] cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device [26278.373880] qcaux 1-1.1:1.2: qcaux converter detected [26278.374032] usb 1-1.1: qcaux converter now attached to ttyUSB0 [26280.824684] qcaux ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71 [26280.924679] qcaux ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71 [26280.929807] usb 1-1.1: USB disconnect, device number 26 [26280.932028] cdc_acm 1-1.1:1.0: failed to set dtr/rts [26280.972022] qcaux ttyUSB0: qcaux converter now disconnected from ttyUSB0 [26280.972050] qcaux 1-1.1:1.2: device disconnected [26286.784844] usb 1-1.1: new high-speed USB device number 27 using ehci-pci [26286.814865] usb 1-1.1: New USB device found, idVendor=1004, idProduct=631c, bcdDevice= 2.16 [26286.814869] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [26286.814872] usb 1-1.1: Product: LGE Android Phone [26286.814874] usb 1-1.1: Manufacturer: LGE [26286.814876] usb 1-1.1: SerialNumber: LGK43079OJAUYT [26300.130317] usb 1-1.1: USB disconnect, device number 27 [26309.056796] usb 1-1.1: new high-speed USB device number 28 using ehci-pci [26309.090705] usb 1-1.1: New USB device found, idVendor=1004, idProduct=633a, bcdDevice= 2.16 [26309.090709] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [26309.090712] usb 1-1.1: Product: LGE Android Phone [26309.090714] usb 1-1.1: Manufacturer: LGE [26309.090716] usb 1-1.1: SerialNumber: LGK43079OJAUYT [26309.093795] cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device [26332.641822] usb 1-1.1: USB disconnect, device number 28 [26332.644099] cdc_acm 1-1.1:1.0: failed to set dtr/rts [26334.912786] usb 1-1.1: new high-speed USB device number 29 using ehci-pci [26334.945761] usb 1-1.1: New USB device found, idVendor=1004, idProduct=6000, bcdDevice= 1.00 [26334.945765] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [26334.945769] usb 1-1.1: Product: MT67xx Preloader [26334.949021] cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device [26334.950154] qcaux 1-1.1:1.2: qcaux converter detected [26334.950332] usb 1-1.1: qcaux converter now attached to ttyUSB0 [26337.399457] qcaux ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71 [26337.499584] qcaux ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71 [26337.505830] usb 1-1.1: USB disconnect, device number 29 [26337.508067] cdc_acm 1-1.1:1.0: failed to set dtr/rts [26337.549502] qcaux ttyUSB0: qcaux converter now disconnected from ttyUSB0 [26337.549533] qcaux 1-1.1:1.2: device disconnected [26356.164779] usb 1-1.1: new high-speed USB device number 30 using ehci-pci [26356.194762] usb 1-1.1: New USB device found, idVendor=1004, idProduct=633a, bcdDevice= 2.16 [26356.194766] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [26356.194768] usb 1-1.1: Product: LGE Android Phone [26356.194771] usb 1-1.1: Manufacturer: LGE [26356.194772] usb 1-1.1: SerialNumber: LGK43079OJAUYT [26356.196144] cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device [26787.554448] usb 1-1.1: USB disconnect, device number 30 [26789.576806] usb 1-1.1: new high-speed USB device number 31 using ehci-pci [26789.614326] usb 1-1.1: New USB device found, idVendor=1004, idProduct=6000, bcdDevice= 1.00 [26789.614331] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [26789.614334] usb 1-1.1: Product: MT67xx Preloader [26789.617062] cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device [26789.618318] qcaux 1-1.1:1.2: qcaux converter detected [26789.618466] usb 1-1.1: qcaux converter now attached to ttyUSB0 [26792.066635] qcaux ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb status: -71 [26792.162016] usb 1-1.1: USB disconnect, device number 31 [26792.162815] cdc_acm 1-1.1:1.1: acm_start_wb - usb_submit_urb(write bulk) failed: -19 [26792.163215] cdc_acm 1-1.1:1.1: acm_start_wb - usb_submit_urb(write bulk) failed: -19 [26792.163352] cdc_acm 1-1.1:1.0: failed to set dtr/rts [26792.174539] qcaux ttyUSB0: qcaux converter now disconnected from ttyUSB0 [26792.174567] qcaux 1-1.1:1.2: device disconnected [26797.760824] usb 1-1.1: new high-speed USB device number 32 using ehci-pci [26797.791067] usb 1-1.1: New USB device found, idVendor=1004, idProduct=631c, bcdDevice= 2.16 [26797.791071] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [26797.791074] usb 1-1.1: Product: LGE Android Phone [26797.791076] usb 1-1.1: Manufacturer: LGE [26797.791078] usb 1-1.1: SerialNumber: LGK43079OJAUYT [27198.690488] usb 1-1.1: USB disconnect, device number 32 [27207.872809] usb 1-1.1: new high-speed USB device number 33 using ehci-pci [27207.903341] usb 1-1.1: New USB device found, idVendor=1004, idProduct=633a, bcdDevice= 2.16 [27207.903345] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [27207.903348] usb 1-1.1: Product: LGE Android Phone [27207.903350] usb 1-1.1: Manufacturer: LGE [27207.903352] usb 1-1.1: SerialNumber: LGK43079OJAUYT [27207.904777] cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device [27222.318784] vboxdrv: 0000000000000000 VMMR0.r0 [27222.540964] vboxdrv: 0000000000000000 VBoxDDR0.r0 [27222.756880] vboxdrv: 0000000000000000 VBoxEhciR0.r0 [27222.759703] VMMR0InitVM: eflags=246 fKernelFeatures=0x0 (SUPKERNELFEATURES_SMAP=0) [27231.420741] usb 1-1.1: reset high-speed USB device number 33 using ehci-pci [27232.088714] usb 1-1.1: reset high-speed USB device number 33 using ehci-pci [27232.348710] usb 1-1.1: reset high-speed USB device number 33 using ehci-pci [27329.785120] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x83 [27329.785251] ------------[ cut here ]------------ [27329.785252] clear_halt for a busy endpoint [27329.785279] WARNING: CPU: 2 PID: 12203 at /build/linux-hwe-3vURZB/linux-hwe-5.3.0/drivers/usb/host/ehci-hcd.c:1040 ehci_endpoint_reset+0xff/0x110 [27329.785280] Modules linked in: qcaux usbserial cdc_acm rfcomm xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo xt_addrtype iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 bpfilter br_netfilter bridge stp llc ccm vboxnetadp(OE) vboxnetflt(OE) aufs vboxdrv(OE) overlay bnep binfmt_misc nvidia_uvm(POE) intel_powerclamp coretemp snd_hda_codec_hdmi uvcvideo videobuf2_vmalloc kvm_intel kvm videobuf2_memops irqbypass videobuf2_v4l2 videobuf2_common btusb btrtl videodev btbcm mc btintel crct10dif_pclmul bluetooth crc32_pclmul ghash_clmulni_intel ecdh_generic ecc snd_hda_codec_conexant snd_hda_codec_generic aesni_intel snd_hda_intel aes_x86_64 snd_intel_nhlt crypto_simd snd_hda_codec cryptd glue_helper snd_hda_core intel_cstate snd_hwdep snd_pcm input_leds iwldvm mac80211 joydev serio_raw nvidia(POE) libarc4 snd_seq_midi iwlwifi thinkpad_acpi mxm_wmi snd_seq_midi_event intel_ips wmi_bmof snd_rawmidi nvram snd_seq ledtrig_audio snd_seq_device [27329.785333] cfg80211 drm lpc_ich snd_timer snd soundcore mei_me mei mac_hid sch_fq_codel vhba(OE) parport_pc ppdev lp parport ip_tables x_tables autofs4 btrfs xor zstd_compress raid6_pq libcrc32c hid_logitech_hidpp hid_logitech_dj hid_generic usbhid hid psmouse ahci sdhci_pci e1000e cqhci libahci sdhci wmi video [27329.785359] CPU: 2 PID: 12203 Comm: USBDevIo--1 Tainted: P OE 5.3.0-46-generic #38~18.04.1-Ubuntu [27329.785360] Hardware name: LENOVO 2924BV6/2924BV6, BIOS 6UET70WW (1.50 ) 10/11/2012 [27329.785364] RIP: 0010:ehci_endpoint_reset+0xff/0x110 [27329.785366] Code: 45 d0 eb 98 48 89 45 d0 e8 be eb ff ff 48 8b 45 d0 eb 89 48 c7 c7 d0 05 7d a5 48 89 45 d0 c6 05 29 47 01 01 01 e8 11 66 8a ff <0f> 0b 48 8b 45 d0 e9 67 ff ff ff 66 0f 1f 44 00 00 66 66 66 66 90 [27329.785368] RSP: 0018:ffffb95c41303d28 EFLAGS: 00010086 [27329.785369] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000006 [27329.785371] RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff9248f3b17440 [27329.785372] RBP: ffffb95c41303d58 R08: 00000000000005c3 R09: 0000000000000004 [27329.785373] R10: 000000000001b4fd R11: 0000000000000001 R12: ffff9248e9845780 [27329.785374] R13: ffff9248e58ca800 R14: 0000000000000083 R15: ffff9248e58cab34 [27329.785376] FS: 00007f14ac0a4700(0000) GS:ffff9248f3b00000(0000) knlGS:0000000000000000 [27329.785377] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [27329.785378] CR2: 0000000000130001 CR3: 0000000225e6a001 CR4: 00000000000226e0 [27329.785379] Call Trace: [27329.785388] usb_hcd_reset_endpoint+0x28/0x60 [27329.785391] usb_clear_halt+0x80/0xa0 [27329.785395] usbdev_do_ioctl+0xeac/0x1300 [27329.785399] ? new_sync_read+0x122/0x1b0 [27329.785401] usbdev_ioctl+0xe/0x20 [27329.785404] do_vfs_ioctl+0xa9/0x640 [27329.785406] ? vfs_read+0x119/0x130 [27329.785408] ksys_ioctl+0x75/0x80 [27329.785410] __x64_sys_ioctl+0x1a/0x20 [27329.785415] do_syscall_64+0x5a/0x130 [27329.785421] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [27329.785423] RIP: 0033:0x7f14d96ed5d7 [27329.785425] Code: b3 66 90 48 8b 05 b1 48 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 81 48 2d 00 f7 d8 64 89 01 48 [27329.785426] RSP: 002b:00007f14ac0a3d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [27329.785429] RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007f14d96ed5d7 [27329.785430] RDX: 00007f14ac0a3dfc RSI: 0000000080045515 RDI: 0000000000000023 [27329.785431] RBP: 00007f14ac0a3de0 R08: 00000000ffffffff R09: 00007f14d95d6918 [27329.785432] R10: 00007f146a48f8b0 R11: 0000000000000246 R12: 00007f1478697930 [27329.785433] R13: 00007f14ac0a3dfc R14: 0000000080045515 R15: 0000000000000000 [27329.785435] ---[ end trace 9401af5d443fdeb5 ]--- [27331.395360] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x81 [27338.179867] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x83 [27354.059459] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x83 [27354.674559] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x83 [27355.864767] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x81 [27355.872095] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x82 [27356.520056] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x81 [27356.525248] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x82 [27357.857920] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x83 [27358.443419] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x83 [27359.070401] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x83 [27359.687772] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x83 [27360.305538] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x83 [27363.313651] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x81 [27363.318615] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x82 [27363.356463] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x81 [27363.361686] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x82 [27364.014751] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x81 [27364.020456] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x82 [27365.164421] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x81 [27365.169928] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x82 [27365.819921] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x81 [27365.826183] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x82 [27366.935497] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x81 [27366.940359] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x82 [27367.583123] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x81 [27367.588057] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x82 [27371.014409] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x81 [27371.019404] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x82 [27372.018749] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x81 [27372.023610] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x82 [27372.653892] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x81 [27372.658927] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x82 [27386.661013] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x81 [27386.666143] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x82 [27387.316840] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x81 [27387.322684] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x82 [27408.768590] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x83 [27413.990593] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x83 [27430.861515] usb 1-1.1: Process 12203 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x83 [27432.930382] usb 1-1.1: USB disconnect, device number 33 [27441.348725] usb 1-1.1: new high-speed USB device number 34 using ehci-pci [27441.388170] usb 1-1.1: New USB device found, idVendor=1004, idProduct=633e, bcdDevice= 2.16 [27441.388175] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [27441.388178] usb 1-1.1: Product: LGE Android Phone [27441.388181] usb 1-1.1: Manufacturer: LGE [27441.388183] usb 1-1.1: SerialNumber: LGK43079OJAUYT [27450.168705] usb 1-1.1: reset high-speed USB device number 34 using ehci-pci [27450.448703] usb 1-1.1: reset high-speed USB device number 34 using ehci-pci [27465.773415] cdc_acm 1-1.1:2.1: ttyACM0: USB ACM device [27470.957079] usb 1-1.1: Process 12259 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x85 [27472.359608] usb 1-1.1: Process 12259 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x85 [27566.964767] usb 1-1.1: reset high-speed USB device number 34 using ehci-pci [27566.995508] cdc_acm 1-1.1:2.1: ttyACM0: USB ACM device [27577.632704] usb 1-1.1: reset high-speed USB device number 34 using ehci-pci [27577.932724] usb 1-1.1: reset high-speed USB device number 34 using ehci-pci [27584.903281] usb 1-1.1: Process 12284 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x85 [27587.257211] usb 1-1.1: Process 12284 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x85 [27596.533758] usb 1-1.1: Process 12284 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x85 [27598.558896] usb 1-1.1: Process 12284 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x85 [27609.312681] usb 1-1.1: Process 12284 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x85 [27625.920858] usb 1-1.1: Process 12284 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x85 [27640.943001] usb 1-1.1: Process 12284 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x85 [27654.680383] usb 1-1.1: Process 12284 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x85 [27657.701552] usb 1-1.1: Process 12284 (USBDevIo--1) called USBDEVFS_CLEAR_HALT for active endpoint 0x85 [27778.018598] usb 1-1.1: USB disconnect, device number 34 [27786.948801] usb 1-1.1: new high-speed USB device number 35 using ehci-pci [27786.979343] usb 1-1.1: New USB device found, idVendor=1004, idProduct=633a, bcdDevice= 2.16 [27786.979347] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [27786.979350] usb 1-1.1: Product: LGE Android Phone [27786.979353] usb 1-1.1: Manufacturer: LGE [27786.979355] usb 1-1.1: SerialNumber: LGK43079OJAUYT [27786.980719] cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device [28463.330798] usb 1-1.1: USB disconnect, device number 35 [28463.333545] cdc_acm 1-1.1:1.0: failed to set dtr/rts [28463.592690] usb 1-1.1: new high-speed USB device number 36 using ehci-pci [28463.623341] usb 1-1.1: New USB device found, idVendor=1004, idProduct=633e, bcdDevice= 2.16 [28463.623346] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [28463.623349] usb 1-1.1: Product: LGE Android Phone [28463.623351] usb 1-1.1: Manufacturer: LGE [28463.623354] usb 1-1.1: SerialNumber: LGK43079OJAUYT [28465.891086] usb 1-1.1: USB disconnect, device number 36 [28466.116791] usb 1-1.1: new high-speed USB device number 37 using ehci-pci [28466.148357] usb 1-1.1: New USB device found, idVendor=1004, idProduct=633e, bcdDevice= 2.16 [28466.148361] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [28466.148364] usb 1-1.1: Product: LGE Android Phone [28466.148367] usb 1-1.1: Manufacturer: LGE [28466.148369] usb 1-1.1: SerialNumber: LGK43079OJAUYT [31196.650980] rfkill: input handler enabled [35919.333924] usb 1-1.1: USB disconnect, device number 37 [35981.456432] wlp3s0: deauthenticating from 34:2c:c4:b8:81:a2 by local choice (Reason: 3=DEAUTH_LEAVING) [35981.544926] PM: suspend entry (deep) [35981.566340] Filesystems sync: 0.021 seconds [35981.866783] Freezing user space processes ... (elapsed 0.004 seconds) done. [35981.871675] OOM killer disabled. [35981.871677] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [35981.872786] printk: Suspending console(s) (use no_console_suspend to debug) [35982.048677] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [35982.048793] sd 1:0:0:0: [sdb] Stopping disk [35982.048821] sd 0:0:0:0: [sda] Synchronizing SCSI cache [35982.048923] sd 0:0:0:0: [sda] Stopping disk [35982.084170] e1000e: EEE TX LPI TIMER: 00000000 [35982.157849] ACPI: EC: interrupt blocked [35982.180713] ACPI: Preparing to enter system sleep state S3 [35982.191520] ACPI: EC: event blocked [35982.191521] ACPI: EC: EC stopped [35982.191521] PM: Saving platform NVS memory [35982.191543] Disabling non-boot CPUs ... [35982.192001] IRQ 31: no longer affine to CPU1 [35982.193048] smpboot: CPU 1 is now offline [35982.196254] IRQ 33: no longer affine to CPU2 [35982.197293] smpboot: CPU 2 is now offline [35982.201607] smpboot: CPU 3 is now offline [35982.205398] ACPI: Low-level resume complete [35982.205459] ACPI: EC: EC started [35982.205460] PM: Restoring platform NVS memory [35982.206255] Enabling non-boot CPUs ... [35982.206331] x86: Booting SMP configuration: [35982.206332] smpboot: Booting Node 0 Processor 1 APIC 0x1 [35982.211810] CPU1 is up [35982.211860] smpboot: Booting Node 0 Processor 2 APIC 0x4 [35982.217738] CPU2 is up [35982.217790] smpboot: Booting Node 0 Processor 3 APIC 0x5 [35982.223205] CPU3 is up [35982.225417] ACPI: Waking up from system sleep state S3 [35982.241589] ACPI: EC: interrupt unblocked [35982.261993] sdhci-pci 0000:05:00.0: MMC controller base frequency changed to 50Mhz. [35982.267249] ACPI: EC: event unblocked [35982.277986] sd 0:0:0:0: [sda] Starting disk [35982.281042] sd 1:0:0:0: [sdb] Starting disk [35982.521755] usb 1-1.2: reset full-speed USB device number 3 using ehci-pci [35982.620077] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [35982.620154] ata5: SATA link down (SStatus 0 SControl 300) [35982.620306] ata6: SATA link down (SStatus 0 SControl 300) [35982.620370] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [35982.621023] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [35982.621026] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [35982.621028] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [35982.623756] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [35982.623758] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [35982.636727] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [35982.636731] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [35982.644136] ata2.00: configured for UDMA/133 [35982.668816] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [35982.668818] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [35982.668819] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [35982.669584] ata1.00: configured for UDMA/100 [35982.713709] usb 1-1.3: reset full-speed USB device number 4 using ehci-pci [35982.777717] sdhci-pci 0000:05:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [35982.901783] usb 1-1.4: reset full-speed USB device number 5 using ehci-pci [35982.978012] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820] [35983.089745] usb 1-1.6: reset high-speed USB device number 6 using ehci-pci [35983.123786] OOM killer enabled. [35983.123787] Restarting tasks ... done. [35983.198184] video LNXVIDEO:01: Restoring backlight state [35983.204425] PM: suspend exit [35983.668926] e1000e: enp0s25 NIC Link is Down [35983.890338] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1 [35984.125599] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1 [35987.500492] wlp3s0: authenticate with 34:2c:c4:b8:81:a2 [35987.501828] wlp3s0: send auth to 34:2c:c4:b8:81:a2 (try 1/3) [35987.508503] wlp3s0: authenticated [35987.509729] wlp3s0: associate with 34:2c:c4:b8:81:a2 (try 1/3) [35987.527184] wlp3s0: RX AssocResp from 34:2c:c4:b8:81:a2 (capab=0x1411 status=0 aid=5) [35987.532063] wlp3s0: associated [35987.609211] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 34:2c:c4:b8:81:a2 [35987.678553] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [35989.620555] rfkill: input handler disabled