[ 0.000000] microcode: CPU0 microcode updated early to revision 0x1b, date = 2014-05-29 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.2.0-23-generic (buildd@lcy01-30) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2) ) #28-Ubuntu SMP Sun Dec 27 17:47:31 UTC 2015 (Ubuntu 4.2.0-23.28-generic 4.2.6) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-23-generic root=UUID=221de9c1-f10a-4be4-9273-5c12864c8680 ro quiet splash intel_pstate=disable vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000a52e7fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a52e8000-0x00000000baeedfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000baeee000-0x00000000baf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000bf9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. XPS L322X/0PJHXN, BIOS A10 08/28/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x23f600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FF800000 mask FFF800000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable [ 0.000000] 5 base 100000000 mask F00000000 write-back [ 0.000000] 6 base 200000000 mask FC0000000 write-back [ 0.000000] 7 base 23F800000 mask FFF800000 uncachable [ 0.000000] 8 base 23F600000 mask FFFE00000 uncachable [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0xa52e8 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01ff0000, 0x01ff0fff] PGTABLE [ 0.000000] BRK [0x01ff1000, 0x01ff1fff] PGTABLE [ 0.000000] BRK [0x01ff2000, 0x01ff2fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x23f400000-0x23f5fffff] [ 0.000000] [mem 0x23f400000-0x23f5fffff] page 2M [ 0.000000] BRK [0x01ff3000, 0x01ff3fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x220000000-0x23f3fffff] [ 0.000000] [mem 0x220000000-0x23f3fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff] [ 0.000000] [mem 0x200000000-0x21fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x40003fff] page 4k [ 0.000000] BRK [0x01ff4000, 0x01ff4fff] PGTABLE [ 0.000000] BRK [0x01ff5000, 0x01ff5fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x40005000-0xa52e7fff] [ 0.000000] [mem 0x40005000-0x401fffff] page 4k [ 0.000000] [mem 0x40200000-0xa51fffff] page 2M [ 0.000000] [mem 0xa5200000-0xa52e7fff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M [ 0.000000] RAMDISK: [mem 0x33b34000-0x35d91fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 0x00000000BAFFE170 00009C (v01 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: FACP 0x00000000BAFE3000 00010C (v05 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: DSDT 0x00000000BAFF1000 00A56F (v02 DELL IVB-CPT 00000000 INTL 20061109) [ 0.000000] ACPI: FACS 0x00000000BAF7C000 000040 [ 0.000000] ACPI: SLIC 0x00000000BAFFD000 000176 (v01 DELL QA09 00000002 LOHR 00000001) [ 0.000000] ACPI: SSDT 0x00000000BAFFC000 000166 (v01 DELL PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: ASF! 0x00000000BAFF0000 0000A5 (v32 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: HPET 0x00000000BAFED000 000038 (v01 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: APIC 0x00000000BAFEC000 000098 (v01 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: MCFG 0x00000000BAFEB000 00003C (v01 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: FPDT 0x00000000BAFEA000 000064 (v01 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: SSDT 0x00000000BAFE9000 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000BAFE8000 000A92 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 0x00000000BAFE7000 00003E (v01 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: UEFI 0x00000000BAFE6000 000042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: POAT 0x00000000BAFE5000 000055 (v03 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: UEFI 0x00000000BAFE2000 00027E (v01 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: DBG2 0x00000000BAFE0000 000070 (v00 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023f5fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x23f5f5000-0x23f5f9fff] [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237200000-ffff88023ebfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000023f5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.000000] node 0: [mem 0x0000000020200000-0x0000000040003fff] [ 0.000000] node 0: [mem 0x0000000040005000-0x00000000a52e7fff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000023f5fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023f5fffff] [ 0.000000] On node 0 totalpages: 1984131 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10500 pages used for memmap [ 0.000000] DMA32 zone: 671975 pages, LIFO batch:31 [ 0.000000] Normal zone: 20440 pages used for memmap [ 0.000000] Normal zone: 1308160 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xbba00000-0xbf9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff] [ 0.000000] PM: Registered nosave memory: [mem 0xa52e8000-0xbaeedfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbaeee000-0xbaf9efff] [ 0.000000] PM: Registered nosave memory: [mem 0xbaf9f000-0xbaffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbafff000-0xbf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffffffff] [ 0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88023f200000 s96728 r8192 d30248 u262144 [ 0.000000] pcpu-alloc: s96728 r8192 d30248 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1953106 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-23-generic root=UUID=221de9c1-f10a-4be4-9273-5c12864c8680 ro quiet splash intel_pstate=disable vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7692572K/7936524K available (8148K kernel code, 1237K rwdata, 3800K rodata, 1460K init, 1292K bss, 243952K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:16640 nr_irqs:488 16 [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2494.288 MHz processor [ 0.000043] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.57 BogoMIPS (lpj=9977152) [ 0.000047] pid_max: default: 32768 minimum: 301 [ 0.000053] ACPI: Core revision 20150619 [ 0.009016] ACPI: All ACPI Tables successfully acquired [ 0.009040] Security Framework initialized [ 0.009051] AppArmor: AppArmor initialized [ 0.009052] Yama: becoming mindful. [ 0.009683] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.012285] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.013426] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.013439] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.013678] Initializing cgroup subsys blkio [ 0.013681] Initializing cgroup subsys memory [ 0.013689] Initializing cgroup subsys devices [ 0.013692] Initializing cgroup subsys freezer [ 0.013694] Initializing cgroup subsys net_cls [ 0.013696] Initializing cgroup subsys perf_event [ 0.013699] Initializing cgroup subsys net_prio [ 0.013701] Initializing cgroup subsys hugetlb [ 0.013728] CPU: Physical Processor ID: 0 [ 0.013730] CPU: Processor Core ID: 0 [ 0.013735] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.013736] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.014204] mce: CPU supports 7 MCE banks [ 0.014214] CPU0: Thermal monitoring handled by SMI [ 0.014222] process: using mwait in idle threads [ 0.014225] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.014227] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.014760] Freeing SMP alternatives memory: 28K (ffffffff81ea4000 - ffffffff81eab000) [ 0.017399] ftrace: allocating 30910 entries in 121 pages [ 0.035574] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.036034] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.075768] TSC deadline timer enabled [ 0.075773] smpboot: CPU0: Intel(R) Core(TM) i7-3537U CPU @ 2.00GHz (fam: 06, model: 3a, stepping: 09) [ 0.075805] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver. [ 0.075830] ... version: 3 [ 0.075831] ... bit width: 48 [ 0.075832] ... generic registers: 4 [ 0.075833] ... value mask: 0000ffffffffffff [ 0.075834] ... max period: 0000ffffffffffff [ 0.075835] ... fixed-purpose events: 3 [ 0.075837] ... event mask: 000000070000000f [ 0.076817] x86: Booting SMP configuration: [ 0.076818] .... node #0, CPUs: #1 [ 0.078454] CPU1: Thermal monitoring handled by SMI [ 0.080697] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.080816] #2 [ 0.082284] microcode: CPU2 microcode updated early to revision 0x1b, date = 2014-05-29 [ 0.082797] CPU2: Thermal monitoring handled by SMI [ 0.085049] #3 [ 0.086665] CPU3: Thermal monitoring handled by SMI [ 0.088780] x86: Booted up 1 node, 4 CPUs [ 0.088783] smpboot: Total of 4 processors activated (19954.30 BogoMIPS) [ 0.093561] devtmpfs: initialized [ 0.096802] evm: security.selinux [ 0.096804] evm: security.SMACK64 [ 0.096805] evm: security.SMACK64EXEC [ 0.096806] evm: security.SMACK64TRANSMUTE [ 0.096807] evm: security.SMACK64MMAP [ 0.096808] evm: security.ima [ 0.096809] evm: security.capability [ 0.096883] PM: Registering ACPI NVS region [mem 0xbaeee000-0xbaf9efff] (724992 bytes) [ 0.096988] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.097087] pinctrl core: initialized pinctrl subsystem [ 0.097213] RTC time: 9:52:44, date: 01/19/16 [ 0.097348] NET: Registered protocol family 16 [ 0.113388] cpuidle: using governor ladder [ 0.121411] cpuidle: using governor menu [ 0.121512] ACPI: bus type PCI registered [ 0.121515] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.121602] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.121605] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.121612] PCI: Using configuration type 1 for base access [ 0.121903] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.121907] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.121908] mtrr: probably your BIOS does not setup all CPUs. [ 0.121909] mtrr: corrected configuration. [ 0.125832] ACPI: Added _OSI(Module Device) [ 0.125834] ACPI: Added _OSI(Processor Device) [ 0.125835] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.125837] ACPI: Added _OSI(Processor Aggregator Device) [ 0.128623] ACPI: Executed 2 blocks of module-level executable AML code [ 0.131002] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.131443] ACPI: Dynamic OEM Table Load: [ 0.131454] ACPI: SSDT 0xFFFF8802358CE000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.132042] ACPI: Dynamic OEM Table Load: [ 0.132051] ACPI: SSDT 0xFFFF8802359B9C00 000303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.132553] ACPI: Dynamic OEM Table Load: [ 0.132560] ACPI: SSDT 0xFFFF880235967200 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.133553] ACPI : EC: EC started [ 0.135635] ACPI: Interpreter enabled [ 0.135645] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580) [ 0.135651] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580) [ 0.135668] ACPI: (supports S0 S3 S4 S5) [ 0.135669] ACPI: Using IOAPIC for interrupt routing [ 0.135705] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.141430] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.141438] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.141581] \_SB_.PCI0:_OSC invalid UUID [ 0.141583] _OSC request data:1 1f 0 [ 0.141587] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.142027] PCI host bridge to bus 0000:00 [ 0.142030] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.142033] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.142035] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.142037] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.142039] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff window] [ 0.142047] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 [ 0.142133] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 [ 0.142149] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit] [ 0.142156] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.142161] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f] [ 0.142261] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.142295] pci 0000:00:14.0: reg 0x10: [mem 0xd0500000-0xd050ffff 64bit] [ 0.142358] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.142391] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.142437] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.142473] pci 0000:00:16.0: reg 0x10: [mem 0xd0515000-0xd051500f 64bit] [ 0.142539] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.142618] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.142651] pci 0000:00:1a.0: reg 0x10: [mem 0xd051a000-0xd051a3ff] [ 0.142727] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.142773] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.142820] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.142852] pci 0000:00:1b.0: reg 0x10: [mem 0xd0510000-0xd0513fff 64bit] [ 0.142919] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.142992] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.143074] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.143107] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.143162] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.143194] pci 0000:00:1d.0: reg 0x10: [mem 0xd0519000-0xd05193ff] [ 0.143270] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.143314] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.143361] pci 0000:00:1f.0: [8086:1e56] type 00 class 0x060100 [ 0.143529] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 0.143557] pci 0000:00:1f.2: reg 0x10: [io 0x2088-0x208f] [ 0.143567] pci 0000:00:1f.2: reg 0x14: [io 0x209c-0x209f] [ 0.143576] pci 0000:00:1f.2: reg 0x18: [io 0x2080-0x2087] [ 0.143586] pci 0000:00:1f.2: reg 0x1c: [io 0x2098-0x209b] [ 0.143594] pci 0000:00:1f.2: reg 0x20: [io 0x2060-0x207f] [ 0.143604] pci 0000:00:1f.2: reg 0x24: [mem 0xd0518000-0xd05187ff] [ 0.143636] pci 0000:00:1f.2: PME# supported from D3hot [ 0.143702] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.143723] pci 0000:00:1f.3: reg 0x10: [mem 0xd0514000-0xd05140ff 64bit] [ 0.143747] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.143908] pci 0000:01:00.0: [168c:0034] type 00 class 0x028000 [ 0.143962] pci 0000:01:00.0: reg 0x10: [mem 0xd0400000-0xd047ffff 64bit] [ 0.144030] pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ 0.144087] pci 0000:01:00.0: supports D1 D2 [ 0.144089] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.144120] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.153488] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.153496] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd04fffff] [ 0.154008] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.154067] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.154124] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.154179] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.154235] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.154291] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.154347] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.154403] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.154635] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.154702] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.154810] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.154813] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.154815] vgaarb: loaded [ 0.154817] vgaarb: bridge control possible 0000:00:02.0 [ 0.155121] SCSI subsystem initialized [ 0.155165] libata version 3.00 loaded. [ 0.155191] ACPI: bus type USB registered [ 0.155211] usbcore: registered new interface driver usbfs [ 0.155221] usbcore: registered new interface driver hub [ 0.155241] usbcore: registered new device driver usb [ 0.155412] PCI: Using ACPI for IRQ routing [ 0.157213] PCI: pci_cache_line_size set to 64 bytes [ 0.157255] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.157257] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.157259] e820: reserve RAM buffer [mem 0xa52e8000-0xa7ffffff] [ 0.157260] e820: reserve RAM buffer [mem 0x23f600000-0x23fffffff] [ 0.157383] NetLabel: Initializing [ 0.157384] NetLabel: domain hash size = 128 [ 0.157385] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.157402] NetLabel: unlabeled traffic allowed by default [ 0.157495] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.157501] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.159530] clocksource: Switched to clocksource hpet [ 0.166236] AppArmor: AppArmor Filesystem Enabled [ 0.166318] pnp: PnP ACPI init [ 0.166462] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.166465] system 00:00: [io 0x1000-0x1003] has been reserved [ 0.166467] system 00:00: [io 0x1004-0x1013] has been reserved [ 0.166470] system 00:00: [io 0xffff] has been reserved [ 0.166472] system 00:00: [io 0x0400-0x0453] could not be reserved [ 0.166474] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.166476] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.166478] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.166483] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.166514] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.166568] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.166572] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.166620] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.166650] pnp 00:04: Plug and Play ACPI device, IDs DLL058b PNP0f13 (active) [ 0.166806] pnp 00:05: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xffff0000-0xffffffff pref] [ 0.166832] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.166834] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.166836] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.166839] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.166841] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.166843] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.166845] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.166847] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.166850] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved [ 0.166852] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.166855] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.167064] pnp: PnP ACPI: found 6 devices [ 0.173679] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.173689] pci 0000:01:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window [ 0.173708] pci 0000:01:00.0: BAR 6: assigned [mem 0xd0480000-0xd048ffff pref] [ 0.173711] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.173718] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd04fffff] [ 0.173728] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.173731] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.173733] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.173735] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff window] [ 0.173737] pci_bus 0000:01: resource 1 [mem 0xd0400000-0xd04fffff] [ 0.173774] NET: Registered protocol family 2 [ 0.173973] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.174152] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.174290] TCP: Hash tables configured (established 65536 bind 65536) [ 0.174320] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.174354] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.174421] NET: Registered protocol family 1 [ 0.174438] pci 0000:00:02.0: Video device with shadowed ROM [ 0.174912] PCI: CLS 64 bytes, default 64 [ 0.174978] Trying to unpack rootfs image as initramfs... [ 0.859760] Freeing initrd memory: 35192K (ffff880033b34000 - ffff880035d92000) [ 0.859786] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.859789] software IO TLB [mem 0xa12e8000-0xa52e8000] (64MB) mapped at [ffff8800a12e8000-ffff8800a52e7fff] [ 0.859877] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer [ 0.859878] hw unit of domain pp0-core 2^-16 Joules [ 0.859880] hw unit of domain package 2^-16 Joules [ 0.859881] hw unit of domain pp1-gpu 2^-16 Joules [ 0.860011] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x1b [ 0.860018] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x1b [ 0.860027] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x1b [ 0.860036] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x1b [ 0.860106] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.860200] Scanning for low memory corruption every 60 seconds [ 0.860614] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.860640] Initialise system trusted keyring [ 0.860668] audit: initializing netlink subsys (disabled) [ 0.860685] audit: type=2000 audit(1453197164.844:1): initialized [ 0.861126] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.862837] zpool: loaded [ 0.862841] zbud: loaded [ 0.863054] VFS: Disk quotas dquot_6.6.0 [ 0.863093] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.863617] fuse init (API version 7.23) [ 0.863778] Key type big_key registered [ 0.864207] Key type asymmetric registered [ 0.864211] Asymmetric key parser 'x509' registered [ 0.864226] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.864273] io scheduler noop registered [ 0.864278] io scheduler deadline registered (default) [ 0.864313] io scheduler cfq registered [ 0.864578] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.864586] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.864620] vesafb: mode is 1920x1080x32, linelength=7680, pages=0 [ 0.864622] vesafb: scrolling: redraw [ 0.864624] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.864636] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90001000000, using 8128k, total 8128k [ 0.864759] Console: switching to colour frame buffer device 240x67 [ 0.864793] fb0: VESA VGA frame buffer device [ 0.864813] intel_idle: MWAIT substates: 0x21120 [ 0.864815] intel_idle: v0.4 model 0x3A [ 0.864816] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.968510] ACPI: AC Adapter [ADP0] (on-line) [ 0.968578] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.968582] ACPI: Power Button [PWRB] [ 0.968621] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.968624] ACPI: Sleep Button [SLPB] [ 0.968665] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 0.969189] ACPI: Lid Switch [LID0] [ 0.969248] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.969252] ACPI: Power Button [PWRF] [ 0.969831] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.969834] ACPI: Thermal Zone [TZ00] (25 C) [ 0.970099] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.970101] ACPI: Thermal Zone [TZ01] (25 C) [ 0.970156] GHES: HEST is not enabled! [ 0.970294] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.973600] Linux agpgart interface v0.103 [ 0.976694] ACPI: Battery Slot [BAT0] (battery present) [ 0.976740] brd: module loaded [ 0.977706] loop: module loaded [ 0.977941] libphy: Fixed MDIO Bus: probed [ 0.977944] tun: Universal TUN/TAP device driver, 1.6 [ 0.977945] tun: (C) 1999-2004 Max Krasnyansky [ 0.977996] PPP generic driver version 2.4.2 [ 0.978174] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.978181] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.979269] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930 [ 0.979277] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.979375] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.979377] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.979379] usb usb1: Product: xHCI Host Controller [ 0.979381] usb usb1: Manufacturer: Linux 4.2.0-23-generic xhci-hcd [ 0.979383] usb usb1: SerialNumber: 0000:00:14.0 [ 0.979507] hub 1-0:1.0: USB hub found [ 0.979519] hub 1-0:1.0: 4 ports detected [ 0.979888] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.979892] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.979930] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.979932] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.979934] usb usb2: Product: xHCI Host Controller [ 0.979936] usb usb2: Manufacturer: Linux 4.2.0-23-generic xhci-hcd [ 0.979938] usb usb2: SerialNumber: 0000:00:14.0 [ 0.980047] hub 2-0:1.0: USB hub found [ 0.980057] hub 2-0:1.0: 4 ports detected [ 0.980422] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.980428] ehci-pci: EHCI PCI platform driver [ 0.980544] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.980550] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.980564] ehci-pci 0000:00:1a.0: debug port 2 [ 0.984459] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.984482] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd051a000 [ 0.996504] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.996537] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.996540] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.996541] usb usb3: Product: EHCI Host Controller [ 0.996543] usb usb3: Manufacturer: Linux 4.2.0-23-generic ehci_hcd [ 0.996545] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.996693] hub 3-0:1.0: USB hub found [ 0.996700] hub 3-0:1.0: 2 ports detected [ 0.996908] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.996914] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 0.996925] ehci-pci 0000:00:1d.0: debug port 2 [ 1.000837] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.000848] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd0519000 [ 1.012519] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.012562] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.012565] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.012566] usb usb4: Product: EHCI Host Controller [ 1.012568] usb usb4: Manufacturer: Linux 4.2.0-23-generic ehci_hcd [ 1.012570] usb usb4: SerialNumber: 0000:00:1d.0 [ 1.012729] hub 4-0:1.0: USB hub found [ 1.012736] hub 4-0:1.0: 2 ports detected [ 1.012865] ehci-platform: EHCI generic platform driver [ 1.012876] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.012880] ohci-pci: OHCI PCI platform driver [ 1.012892] ohci-platform: OHCI generic platform driver [ 1.012900] uhci_hcd: USB Universal Host Controller Interface driver [ 1.012957] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.015796] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.015802] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.016010] mousedev: PS/2 mouse device common for all mice [ 1.016319] rtc_cmos 00:01: RTC can wake from S4 [ 1.016465] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.016493] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.016502] i2c /dev entries driver [ 1.016609] device-mapper: uevent: version 1.0.3 [ 1.016683] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com [ 1.016708] ledtrig-cpu: registered to indicate activity on CPUs [ 1.016868] PCCT header not found. [ 1.017135] NET: Registered protocol family 10 [ 1.017341] NET: Registered protocol family 17 [ 1.017360] Key type dns_resolver registered [ 1.017886] Loading compiled-in X.509 certificates [ 1.018983] Loaded X.509 cert 'Build time autogenerated kernel key: 5b77c7b2b6447c14c514ab2aee8004bfbd7c3913' [ 1.019002] registered taskstats version 1 [ 1.019026] zswap: loading zswap [ 1.019029] zswap: using zbud pool [ 1.019034] zswap: using lzo compressor [ 1.022076] Key type trusted registered [ 1.022379] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.027649] Key type encrypted registered [ 1.027660] AppArmor: AppArmor sha1 policy hashing enabled [ 1.027666] ima: No TPM chip found, activating TPM-bypass! [ 1.027690] evm: HMAC attrs: 0x1 [ 1.027947] Magic number: 0:688:879 [ 1.028049] rtc_cmos 00:01: setting system clock to 2016-01-19 09:52:45 UTC (1453197165) [ 1.028717] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.028719] EDD information not available. [ 1.028779] PM: Hibernation image not present or could not be loaded. [ 1.029063] Freeing unused kernel memory: 1460K (ffffffff81d37000 - ffffffff81ea4000) [ 1.029064] Write protecting the kernel read-only data: 12288k [ 1.029178] Freeing unused kernel memory: 32K (ffff8800017f8000 - ffff880001800000) [ 1.029251] Freeing unused kernel memory: 296K (ffff880001bb6000 - ffff880001c00000) [ 1.038554] random: systemd-udevd urandom read with 5 bits of entropy available [ 1.271308] wmi: Mapper loaded [ 1.275093] ahci 0000:00:1f.2: version 3.0 [ 1.275232] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode [ 1.275235] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 1.275685] scsi host0: ahci [ 1.275780] scsi host1: ahci [ 1.275863] scsi host2: ahci [ 1.275945] scsi host3: ahci [ 1.276038] scsi host4: ahci [ 1.276615] [drm] Initialized drm 1.1.0 20060810 [ 1.276824] scsi host5: ahci [ 1.276888] ata1: SATA max UDMA/133 abar m2048@0xd0518000 port 0xd0518100 irq 25 [ 1.276890] ata2: DUMMY [ 1.276891] ata3: DUMMY [ 1.276893] ata4: DUMMY [ 1.276894] ata5: DUMMY [ 1.276895] ata6: DUMMY [ 1.296651] AVX version of gcm_enc/dec engaged. [ 1.296654] AES CTR mode by8 optimization enabled [ 1.302940] [drm] Memory usable by graphics device = 2048M [ 1.302943] checking generic (c0000000 7f0000) vs hw (c0000000 10000000) [ 1.302944] fb: switching to inteldrmfb from VESA VGA [ 1.302967] Console: switching to colour dummy device 80x25 [ 1.303772] [drm] Replacing VGA console driver [ 1.308865] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 1.312141] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.312143] [drm] Driver supports precise vblank timestamp query. [ 1.312206] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.324882] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 1.327774] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.335900] acpi device:2d: registered as cooling_device4 [ 1.335997] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 1.336117] [drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0 [ 1.389030] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2 [ 1.406533] fbcon: inteldrmfb (fb0) is primary device [ 1.406600] Console: switching to colour frame buffer device 240x67 [ 1.406626] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.406627] i915 0000:00:02.0: registered panic notifier [ 1.441845] usb 3-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.441848] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.442166] hub 3-1:1.0: USB hub found [ 1.442346] hub 3-1:1.0: 6 ports detected [ 1.457797] usb 4-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.457800] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.458187] hub 4-1:1.0: USB hub found [ 1.458354] hub 4-1:1.0: 8 ports detected [ 1.597300] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.599958] ata1.00: ATA-8: LITEONIT LMT-256M6M mSATA 256GB, DM8110D, max UDMA/133 [ 1.599961] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.600602] ata1.00: configured for UDMA/133 [ 1.600779] scsi 0:0:0:0: Direct-Access ATA LITEONIT LMT-256 10D PQ: 0 ANSI: 5 [ 1.601085] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 1.601111] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.601137] sd 0:0:0:0: [sda] Write Protect is off [ 1.601142] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.601160] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.601709] sda: sda1 sda2 sda3 sda4 < sda5 > [ 1.602291] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.713339] usb 3-1.5: new high-speed USB device number 3 using ehci-pci [ 1.729442] usb 4-1.5: new full-speed USB device number 3 using ehci-pci [ 1.823805] usb 4-1.5: string descriptor 0 read error: -22 [ 1.823831] usb 4-1.5: New USB device found, idVendor=0cf3, idProduct=3004 [ 1.823832] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.857588] tsc: Refined TSC clocksource calibration: 2494.334 MHz [ 1.857592] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f45126d86, max_idle_ns: 440795256522 ns [ 2.103827] usb 3-1.5: New USB device found, idVendor=1bcf, idProduct=288f [ 2.103830] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.103832] usb 3-1.5: Product: Laptop_Integrated_Webcam_1.3M [ 2.103834] usb 3-1.5: Manufacturer: CN01RH717248726OD27AA00 [ 2.257952] input: CyPS/2 Cypress Trackpad as /devices/platform/i8042/serio1/input/input6 [ 2.858802] clocksource: Switched to clocksource tsc [ 3.026805] raid6: sse2x1 gen() 8291 MB/s [ 3.094882] raid6: sse2x1 xor() 6586 MB/s [ 3.162963] raid6: sse2x2 gen() 10425 MB/s [ 3.231041] raid6: sse2x2 xor() 7313 MB/s [ 3.299118] raid6: sse2x4 gen() 12144 MB/s [ 3.367194] raid6: sse2x4 xor() 9001 MB/s [ 3.367196] raid6: using algorithm sse2x4 gen() 12144 MB/s [ 3.367196] raid6: .... xor() 9001 MB/s, rmw enabled [ 3.367197] raid6: using ssse3x2 recovery algorithm [ 3.368120] xor: automatically using best checksumming function: [ 3.407239] avx : 22756.000 MB/sec [ 3.419531] Btrfs loaded [ 9.036016] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 9.129322] systemd[1]: Failed to insert module 'kdbus': Function not implemented [ 9.133903] systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 9.134017] systemd[1]: Detected architecture x86-64. [ 9.134214] systemd[1]: Set hostname to . [ 9.212715] systemd[1]: [/lib/systemd/system/casper.service:10] Failed to parse input specifier, ignoring: force-tty [ 9.214128] systemd[1]: ModemManager.service: Cannot add dependency job, ignoring: Unit ModemManager.service is masked. [ 9.214612] systemd[1]: Created slice Root Slice. [ 9.214664] systemd[1]: Listening on fsck to fsckd communication Socket. [ 9.214996] systemd[1]: Created slice System Slice. [ 9.215012] systemd[1]: Reached target Remote File Systems (Pre). [ 9.215039] systemd[1]: Listening on udev Control Socket. [ 9.215046] systemd[1]: Reached target User and Group Name Lookups. [ 9.215069] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 9.215329] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice. [ 9.215363] systemd[1]: Listening on Journal Socket. [ 9.215901] systemd[1]: Starting LSB: controls configuration of serial ports... [ 9.217801] systemd[1]: Starting Load Kernel Modules... [ 9.218561] systemd[1]: Started Read required files in advance. [ 9.219718] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 9.220483] systemd[1]: Started Braille Device Support. [ 9.221552] systemd[1]: Starting Uncomplicated firewall... [ 9.221619] systemd[1]: Listening on Journal Socket (/dev/log). [ 9.222430] systemd[1]: Starting Increase datagram queue length... [ 9.222910] systemd[1]: Created slice User and Session Slice. [ 9.222934] systemd[1]: Reached target Slices. [ 9.222991] systemd[1]: Listening on udev Kernel Socket. [ 9.223949] systemd[1]: Starting udev Coldplug all Devices... [ 9.224907] systemd[1]: Mounting POSIX Message Queue File System... [ 9.225020] systemd[1]: Listening on Journal Audit Socket. [ 9.225191] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 9.228193] systemd[1]: Created slice system-getty.slice. [ 9.228685] systemd[1]: Created slice system-postgresql.slice. [ 9.229691] systemd[1]: Mounting Huge Pages File System... [ 9.229950] lp: driver loaded but no devices found [ 9.232679] systemd[1]: Starting Setup Virtual Console... [ 9.232764] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 9.233361] ppdev: user-space parallel port driver [ 9.234755] systemd[1]: Mounting Debug File System... [ 9.236275] systemd[1]: Mounted Huge Pages File System. [ 9.236357] systemd[1]: Mounted Debug File System. [ 9.236416] systemd[1]: Mounted POSIX Message Queue File System. [ 9.237275] systemd[1]: Started LSB: controls configuration of serial ports. [ 9.238721] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 9.239452] systemd[1]: Started Load Kernel Modules. [ 9.240808] systemd[1]: Started Uncomplicated firewall. [ 9.241476] systemd[1]: Started Increase datagram queue length. [ 9.242712] systemd[1]: Started Setup Virtual Console. [ 9.257696] systemd[1]: Listening on Syslog Socket. [ 9.258462] systemd[1]: Starting Journal Service... [ 9.259151] systemd[1]: Starting Apply Kernel Variables... [ 9.260138] systemd[1]: Mounting FUSE Control File System... [ 9.261307] systemd[1]: Starting Create Static Device Nodes in /dev... [ 9.262758] systemd[1]: Mounted FUSE Control File System. [ 9.265229] systemd[1]: Started Apply Kernel Variables. [ 9.269748] systemd[1]: Started Create Static Device Nodes in /dev. [ 9.271570] systemd[1]: Starting udev Kernel Device Manager... [ 9.283645] systemd[1]: Started Journal Service. [ 9.320652] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 9.351259] random: nonblocking pool is initialized [ 9.351476] systemd-journald[348]: Received request to flush runtime journal from PID 1 [ 9.437848] audit: type=1400 audit(1453197173.892:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=506 comm="apparmor_parser" [ 9.437854] audit: type=1400 audit(1453197173.892:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=506 comm="apparmor_parser" [ 9.441075] audit: type=1400 audit(1453197173.896:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=506 comm="apparmor_parser" [ 9.441083] audit: type=1400 audit(1453197173.896:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=506 comm="apparmor_parser" [ 9.442721] audit: type=1400 audit(1453197173.900:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=506 comm="apparmor_parser" [ 9.442727] audit: type=1400 audit(1453197173.900:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=506 comm="apparmor_parser" [ 9.442731] audit: type=1400 audit(1453197173.900:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-nesting" pid=506 comm="apparmor_parser" [ 9.442734] audit: type=1400 audit(1453197173.900:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-with-nesting" pid=506 comm="apparmor_parser" [ 9.444315] audit: type=1400 audit(1453197173.900:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=506 comm="apparmor_parser" [ 9.444321] audit: type=1400 audit(1453197173.900:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=506 comm="apparmor_parser" [ 9.540211] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.554770] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150619/utaddress-254) [ 9.554779] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.554782] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254) [ 9.554786] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.554788] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254) [ 9.554792] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.554793] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254) [ 9.554797] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.554798] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 9.594004] ath: phy0: ASPM enabled: 0x42 [ 9.594009] ath: EEPROM regdomain: 0x6c [ 9.594010] ath: EEPROM indicates we should expect a direct regpair map [ 9.594012] ath: Country alpha2 being used: 00 [ 9.594013] ath: Regpair used: 0x6c [ 9.599780] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 9.600140] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90001b00000, irq=16 [ 9.642349] intel_rapl: Found RAPL domain package [ 9.642354] intel_rapl: Found RAPL domain core [ 9.642356] intel_rapl: Found RAPL domain uncore [ 9.695311] media: Linux media interface: v0.10 [ 9.700659] Linux video capture interface: v2.00 [ 9.704485] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 9.707022] Bluetooth: Core ver 2.20 [ 9.707036] NET: Registered protocol family 31 [ 9.707038] Bluetooth: HCI device and connection manager initialized [ 9.707052] Bluetooth: HCI socket layer initialized [ 9.707055] Bluetooth: L2CAP socket layer initialized [ 9.707061] Bluetooth: SCO socket layer initialized [ 9.713587] usbcore: registered new interface driver btusb [ 9.721790] input: Dell WMI hotkeys as /devices/virtual/input/input8 [ 9.724432] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (1bcf:288f) [ 9.745000] cfg80211: World regulatory domain updated: [ 9.745003] cfg80211: DFS Master region: unset [ 9.745005] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 9.745008] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 9.745010] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 9.745012] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 9.745015] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 9.745018] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 9.745020] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 9.745022] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 9.745024] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 9.754089] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3260: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 9.754094] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 9.754096] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 9.754098] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 9.754100] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 9.754103] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 9.754106] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 9.766069] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 9.766122] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 9.766210] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 9.777293] usbcore: registered new interface driver ath3k [ 9.805650] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input12 [ 9.805731] usbcore: registered new interface driver uvcvideo [ 9.805732] USB Video Class driver (1.1.1) [ 9.972982] usb 4-1.5: USB disconnect, device number 3 [ 10.030426] Adding 15871996k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:15871996k SSFS [ 10.166618] cgroup: new mount options do not match the existing superblock, will be ignored [ 10.170990] usb 4-1.5: new full-speed USB device number 4 using ehci-pci [ 10.264809] usb 4-1.5: string descriptor 0 read error: -22 [ 10.264814] usb 4-1.5: New USB device found, idVendor=0cf3, idProduct=3004 [ 10.264815] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 10.542241] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 10.542244] Bluetooth: BNEP filters: protocol multicast [ 10.542248] Bluetooth: BNEP socket layer initialized [ 10.593507] hidraw: raw HID events driver (C) Jiri Kosina [ 11.202610] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.217448] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 11.227952] Ebtables v2.0 registered [ 11.256511] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 11.271773] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 11.342119] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 11.382534] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 11.385654] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 11.394499] vboxdrv: Found 4 processor cores [ 11.415552] vboxdrv: TSC mode is Invariant, tentative frequency 2494333502 Hz [ 11.415555] vboxdrv: Successfully loaded version 5.0.10_Ubuntu (interface 0x00240000) [ 11.423745] VBoxNetFlt: Successfully started. [ 11.438337] VBoxNetAdp: Successfully started. [ 11.440837] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 11.455834] VBoxPciLinuxInit [ 11.459121] vboxpci: IOMMU not found (not registered) [ 11.499402] device virbr0-nic entered promiscuous mode [ 11.768490] virbr0: port 1(virbr0-nic) entered listening state [ 11.768506] virbr0: port 1(virbr0-nic) entered listening state [ 11.839819] virbr0: port 1(virbr0-nic) entered disabled state [ 12.829236] Bluetooth: RFCOMM TTY layer initialized [ 12.829245] Bluetooth: RFCOMM socket layer initialized [ 12.829250] Bluetooth: RFCOMM ver 1.11 [ 14.809303] wlan0: authenticate with 08:62:66:8f:5a:9c [ 14.823036] wlan0: direct probe to 08:62:66:8f:5a:9c (try 1/3) [ 15.024527] wlan0: send auth to 08:62:66:8f:5a:9c (try 2/3) [ 15.025568] wlan0: authenticated [ 15.028608] wlan0: associate with 08:62:66:8f:5a:9c (try 1/3) [ 15.037511] wlan0: RX AssocResp from 08:62:66:8f:5a:9c (capab=0x511 status=0 aid=33) [ 15.037624] wlan0: associated [ 15.037647] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 110.324452] audit_printk_skb: 93 callbacks suppressed [ 110.324454] audit: type=1400 audit(1453197347.079:43): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/telepathy-ofono" name="/dev/tty" pid=3691 comm="telepathy-ofono" requested_mask="r" denied_mask="r" fsuid=1001 ouid=0 [ 2887.872360] wlan0: deauthenticating from 08:62:66:8f:5a:9c by local choice (Reason: 3=DEAUTH_LEAVING) [ 2887.882642] cfg80211: World regulatory domain updated: [ 2887.882646] cfg80211: DFS Master region: unset [ 2887.882647] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 2887.882650] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 2887.882652] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 2887.882654] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 2887.882657] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 2887.882659] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 2887.882661] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 2887.882663] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 2887.882665] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 2888.182515] PM: Syncing filesystems ... done. [ 2888.213814] PM: Preparing system for sleep (mem) [ 2888.213941] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 2888.216131] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 2888.217314] PM: Suspending system (mem) [ 2888.217326] Suspending console(s) (use no_console_suspend to debug) [ 2888.217530] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 2888.220126] sd 0:0:0:0: [sda] Stopping disk [ 2888.847180] PM: suspend of devices complete after 629.029 msecs [ 2888.863165] PM: late suspend of devices complete after 15.961 msecs [ 2888.864424] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 2888.864441] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 2888.864493] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 2888.879237] PM: noirq suspend of devices complete after 16.050 msecs [ 2888.879481] ACPI: Preparing to enter system sleep state S3 [ 2888.891347] ACPI : EC: EC stopped [ 2888.891347] PM: Saving platform NVS memory [ 2888.891351] Disabling non-boot CPUs ... [ 2888.892665] smpboot: CPU 1 is now offline [ 2888.916694] smpboot: CPU 2 is now offline [ 2888.935599] Broke affinity for irq 16 [ 2888.936617] smpboot: CPU 3 is now offline [ 2888.952839] ACPI: Low-level resume complete [ 2888.952880] ACPI : EC: EC started [ 2888.952880] PM: Restoring platform NVS memory [ 2888.953928] microcode: CPU0 microcode updated early to revision 0x1b, date = 2014-05-29 [ 2888.954055] Enabling non-boot CPUs ... [ 2888.954098] x86: Booting SMP configuration: [ 2888.954098] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 2888.965929] cache: parent cpu1 should not be sleeping [ 2888.966182] CPU1 is up [ 2888.966209] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 2888.967673] microcode: CPU2 microcode updated early to revision 0x1b, date = 2014-05-29 [ 2888.981981] cache: parent cpu2 should not be sleeping [ 2888.982237] CPU2 is up [ 2888.982261] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 2888.998040] cache: parent cpu3 should not be sleeping [ 2888.998284] CPU3 is up [ 2889.002923] ACPI: Waking up from system sleep state S3 [ 2889.058024] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 2889.058209] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 2889.058279] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 2889.058360] PM: noirq resume of devices complete after 16.480 msecs [ 2889.058663] PM: early resume of devices complete after 0.286 msecs [ 2889.058739] usb usb1: root hub lost power or was reset [ 2889.058741] usb usb2: root hub lost power or was reset [ 2889.058832] usb usb3: root hub lost power or was reset [ 2889.060082] usb usb4: root hub lost power or was reset [ 2889.060114] ath: phy0: ASPM enabled: 0x42 [ 2889.062732] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 2889.063985] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 2889.064198] sd 0:0:0:0: [sda] Starting disk [ 2889.166008] rtc_cmos 00:01: System wakeup disabled by ACPI [ 2889.382203] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2889.385398] ata1.00: configured for UDMA/133 [ 2889.394179] usb 3-1: reset high-speed USB device number 2 using ehci-pci [ 2889.394196] usb 4-1: reset high-speed USB device number 2 using ehci-pci [ 2889.806675] usb 3-1.5: reset high-speed USB device number 3 using ehci-pci [ 2889.806684] usb 4-1.5: reset full-speed USB device number 4 using ehci-pci [ 2889.841718] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input14 [ 2889.899048] usb 4-1.5: device firmware changed [ 2890.024702] mei_me 0000:00:16.0: hbm: properties response: wrong status = 1 CLIENT_NOT_FOUND [ 2890.024704] mei_me 0000:00:16.0: mei_irq_read_handler ret = -71. [ 2890.024719] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60000106 [ 2890.161891] PM: resume of devices complete after 1101.964 msecs [ 2890.162114] PM: Finishing wakeup. [ 2890.162115] Restarting tasks ... done. [ 2890.179478] usb 4-1.5: USB disconnect, device number 4 [ 2890.182702] video LNXVIDEO:00: Restoring backlight state [ 2890.228555] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2890.247813] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2890.251354] usb 4-1.5: new full-speed USB device number 5 using ehci-pci [ 2890.271675] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd [ 2890.290492] usb 2-2: New USB device found, idVendor=2109, idProduct=0811 [ 2890.290498] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2890.290500] usb 2-2: Product: DU3200 3.0 Dock [ 2890.290503] usb 2-2: Manufacturer: Goodway [ 2890.295575] hub 2-2:1.0: USB hub found [ 2890.296067] hub 2-2:1.0: 4 ports detected [ 2890.344982] usb 4-1.5: string descriptor 0 read error: -22 [ 2890.344989] usb 4-1.5: New USB device found, idVendor=0cf3, idProduct=3004 [ 2890.344992] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2890.356166] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2890.399340] usb 1-2: new high-speed USB device number 2 using xhci_hcd [ 2890.528506] usb 1-2: New USB device found, idVendor=2109, idProduct=3431 [ 2890.528513] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2890.528517] usb 1-2: Product: DU3200 2.0 Dock [ 2890.529101] hub 1-2:1.0: USB hub found [ 2890.529234] hub 1-2:1.0: 4 ports detected [ 2890.571701] usb 2-2.1: new SuperSpeed USB device number 3 using xhci_hcd [ 2890.588722] usb 2-2.1: New USB device found, idVendor=17e9, idProduct=430f [ 2890.588729] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2890.588734] usb 2-2.1: Product: Kensington USB3.0 Video Dock [ 2890.588737] usb 2-2.1: Manufacturer: DisplayLink [ 2890.588740] usb 2-2.1: SerialNumber: 10013398 [ 2890.605907] usb 4-1.5: USB disconnect, device number 5 [ 2890.803825] usb 4-1.5: new full-speed USB device number 6 using ehci-pci [ 2890.807830] usb 1-2.2: new low-speed USB device number 3 using xhci_hcd [ 2890.898399] usb 4-1.5: string descriptor 0 read error: -22 [ 2890.898409] usb 4-1.5: New USB device found, idVendor=0cf3, idProduct=3004 [ 2890.898413] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2890.904760] usb 1-2.2: New USB device found, idVendor=03f0, idProduct=0024 [ 2890.904766] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2890.904770] usb 1-2.2: Product: HP Basic USB Keyboard [ 2890.904774] usb 1-2.2: Manufacturer: CHICONY [ 2890.905005] usb 1-2.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2890.931476] cdc_ether 2-2.1:1.5 eth0: register 'cdc_ether' at usb-0000:00:14.0-2.1, CDC Ethernet Device, 00:50:b6:60:33:33 [ 2890.932790] usbcore: registered new interface driver cdc_ether [ 2890.938235] usb 2-2.1: Warning! Unlikely big volume range (=511), cval->res is probably wrong. [ 2890.938240] usb 2-2.1: [14] FU [Line Playback Volume] ch = 2, val = -8176/0/16 [ 2890.938796] usb 2-2.1: Warning! Unlikely big volume range (=767), cval->res is probably wrong. [ 2890.938800] usb 2-2.1: [11] FU [DisplayLink Audio Capture Volume] ch = 2, val = -4592/7680/16 [ 2890.941490] usbcore: registered new interface driver snd-usb-audio [ 2890.943002] cdc_ether 2-2.1:1.5 eth1: renamed from eth0 [ 2890.975982] usb 1-2.4: new high-speed USB device number 4 using xhci_hcd [ 2890.977842] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 2890.984506] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 2891.064475] usb 1-2.4: New USB device found, idVendor=1a40, idProduct=0101 [ 2891.064493] usb 1-2.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2891.064497] usb 1-2.4: Product: USB 2.0 Hub [ 2891.065014] hub 1-2.4:1.0: USB hub found [ 2891.065224] hub 1-2.4:1.0: 4 ports detected [ 2891.096473] usbcore: registered new interface driver usbhid [ 2891.096476] usbhid: USB HID core driver [ 2891.100450] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/0003:03F0:0024.0001/input/input15 [ 2891.157514] hid-generic 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:14.0-2.2/input0 [ 2891.336457] usb 1-2.4.1: new low-speed USB device number 5 using xhci_hcd [ 2891.431136] usb 1-2.4.1: New USB device found, idVendor=046d, idProduct=c045 [ 2891.431147] usb 1-2.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2891.431153] usb 1-2.4.1: Product: USB-PS/2 Optical Mouse [ 2891.431158] usb 1-2.4.1: Manufacturer: Logitech [ 2891.431654] usb 1-2.4.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2891.436424] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4.1/1-2.4.1:1.0/0003:046D:C045.0002/input/input16 [ 2891.493557] hid-generic 0003:046D:C045.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-2.4.1/input0 [ 2893.854657] wlan0: authenticate with 08:62:66:8f:5a:9c [ 2893.869099] wlan0: send auth to 08:62:66:8f:5a:9c (try 1/3) [ 2893.870181] wlan0: authenticated [ 2893.871285] wlan0: associate with 08:62:66:8f:5a:9c (try 1/3) [ 2893.880131] wlan0: RX AssocResp from 08:62:66:8f:5a:9c (capab=0x511 status=0 aid=34) [ 2893.880231] wlan0: associated [ 2893.880256] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 3726.409756] usb 1-2.4.2: new high-speed USB device number 6 using xhci_hcd [ 3726.498973] usb 1-2.4.2: New USB device found, idVendor=18d1, idProduct=4ee2 [ 3726.498983] usb 1-2.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3726.498988] usb 1-2.4.2: Product: Nexus 4 [ 3726.498992] usb 1-2.4.2: Manufacturer: LGE [ 3726.498997] usb 1-2.4.2: SerialNumber: 023debaf9f17910a [ 4247.505401] usb 1-2.4.2: USB disconnect, device number 6 [ 4258.213370] usb 1-2.4.2: new high-speed USB device number 7 using xhci_hcd [ 4258.302670] usb 1-2.4.2: New USB device found, idVendor=18d1, idProduct=d001 [ 4258.302676] usb 1-2.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4258.302680] usb 1-2.4.2: Product: Nexus 4 [ 4258.302683] usb 1-2.4.2: Manufacturer: LGE [ 4258.302685] usb 1-2.4.2: SerialNumber: 023debaf9f17910a [ 4445.362037] usb 1-2.4.2: USB disconnect, device number 7 [ 4521.421986] usb 1-2.4.2: new high-speed USB device number 8 using xhci_hcd [ 4521.511202] usb 1-2.4.2: New USB device found, idVendor=18d1, idProduct=4ee2 [ 4521.511221] usb 1-2.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4521.511229] usb 1-2.4.2: Product: Nexus 4 [ 4521.511237] usb 1-2.4.2: Manufacturer: LGE [ 4521.511245] usb 1-2.4.2: SerialNumber: 023debaf9f17910a [ 7266.294285] perf interrupt took too long (2529 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [17044.884029] usb 1-2.4.2: USB disconnect, device number 8 [17068.404198] usb 1-2.4.2: new high-speed USB device number 9 using xhci_hcd [17068.493033] usb 1-2.4.2: New USB device found, idVendor=18d1, idProduct=4ee2 [17068.493043] usb 1-2.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [17068.493048] usb 1-2.4.2: Product: Nexus 4 [17068.493053] usb 1-2.4.2: Manufacturer: LGE [17068.493058] usb 1-2.4.2: SerialNumber: 023debaf9f17910a [17267.339484] PulseaudioSound[10611]: segfault at fffff284db322919 ip 0000000001c47ce0 sp 00007f5c8bc504b8 error 5 in spotify[400000+2520000] [17273.135386] audit: type=1400 audit(1453215818.522:44): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/telepathy-ofono" name="/dev/tty" pid=23879 comm="telepathy-ofono" requested_mask="r" denied_mask="r" fsuid=1001 ouid=0 [19037.021220] perf interrupt took too long (5075 > 5000), lowering kernel.perf_event_max_sample_rate to 25000