[ 0.000000] Linux version 2.6.24-16-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 12:47:45 UTC 2008 (Ubuntu 2.6.24-16.30-generic) [ 0.000000] Command line: root=UUID=b08651cb-f232-4ff5-b240-0d1d5377788f ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf6b0000 (usable) [ 0.000000] BIOS-e820: 00000000bf6b0000 - 00000000bf6cb000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf6cb000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 784048) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used [ 0.000000] end_pfn_map = 1310720 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F76D0 checksum 0 [ 0.000000] ACPI: RSDP 000F76D0, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT BF6BEDBC, 0094 (r1 Sony VAIO 20070905 PTL 0) [ 0.000000] ACPI: FACP BF6C7BD2, 00F4 (r3 Sony VAIO 20070905 PTL 1) [ 0.000000] ACPI: DSDT BF6C041A, 7744 (r2 Sony VAIO 20070905 PTL 20050624) [ 0.000000] ACPI: FACS BF6CAFC0, 0040 [ 0.000000] ACPI: APIC BF6C7CC6, 0068 (r1 Sony VAIO 20070905 PTL 5A) [ 0.000000] ACPI: HPET BF6C7D2E, 0038 (r1 Sony VAIO 20070905 PTL 5A) [ 0.000000] ACPI: MCFG BF6C7D66, 003C (r1 Sony VAIO 20070905 PTL 5A) [ 0.000000] ACPI: TCPA BF6C7DA2, 0032 (r1 Sony VAIO 20070905 PTL 5A52) [ 0.000000] ACPI: TMOR BF6C7DD4, 0026 (r1 Sony VAIO 20070905 PTL 3) [ 0.000000] ACPI: SLIC BF6C7DFA, 0176 (r1 Sony VAIO 20070905 PTL 1000000) [ 0.000000] ACPI: APIC BF6C7F70, 0068 (r1 Sony VAIO 20070905 PTL 0) [ 0.000000] ACPI: BOOT BF6C7FD8, 0028 (r1 Sony VAIO 20070905 PTL 1) [ 0.000000] ACPI: SSDT BF6C013D, 02DD (r1 Sony VAIO 20070905 PTL 20050624) [ 0.000000] ACPI: SSDT BF6C001B, 0122 (r1 Sony VAIO 20070905 PTL 20050624) [ 0.000000] ACPI: SSDT BF6BF3DC, 025F (r1 Sony VAIO 20070905 PTL 20050624) [ 0.000000] ACPI: SSDT BF6BF336, 00A6 (r1 Sony VAIO 20070905 PTL 20050624) [ 0.000000] ACPI: SSDT BF6BEE50, 04E6 (r1 Sony VAIO 20070905 PTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: DMI detected: Sony [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000140000000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 784048) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1310720 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 784048 [ 0.000000] 0: 1048576 -> 1310720 [ 0.000000] On node 0 totalpages: 1046095 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1210 pages reserved [ 0.000000] DMA zone: 2733 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 765672 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] swsusp: Registered nosave memory region: 00000000bf6b0000 - 00000000bf6cb000 [ 0.000000] swsusp: Registered nosave memory region: 00000000bf6cb000 - 00000000c0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000c0000000 - 00000000e0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000f0000000 - 00000000fec00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec10000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fec10000 - 00000000fed00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed00000 - 00000000fed14000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed14000 - 00000000fed1a000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed1c000 - 00000000fed90000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed90000 - 00000000fee00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ff000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1026965 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=UUID=b08651cb-f232-4ff5-b240-0d1d5377788f ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 12.496830] Marking TSC unstable due to TSCs unsynchronized [ 12.496835] time.c: Detected 2194.498 MHz processor. [ 12.498236] Console: colour VGA+ 80x25 [ 12.498243] console [tty0] enabled [ 12.498294] Checking aperture... [ 12.498314] Calgary: detecting Calgary via BIOS EBDA area [ 12.498318] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 12.498322] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 12.575677] Placing software IO TLB between 0x103b000 - 0x503b000 [ 12.658266] Memory: 4034120k/5242880k available (2466k kernel code, 150260k reserved, 1309k data, 316k init) [ 12.658335] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 12.734489] Calibrating delay using timer specific routine.. 4395.45 BogoMIPS (lpj=8790903) [ 12.734558] Security Framework initialized [ 12.734572] SELinux: Disabled at boot. [ 12.734597] AppArmor: AppArmor initialized [ 12.734606] Failure registering capabilities with primary security module. [ 12.735574] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 12.740782] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 12.743201] Mount-cache hash table entries: 256 [ 12.743491] CPU: L1 I cache: 32K, L1 D cache: 32K [ 12.743497] CPU: L2 cache: 4096K [ 12.743502] CPU 0/0 -> Node 0 [ 12.743505] using mwait in idle threads. [ 12.743509] CPU: Physical Processor ID: 0 [ 12.743512] CPU: Processor Core ID: 0 [ 12.743526] CPU0: Thermal monitoring enabled (TM2) [ 12.743553] SMP alternatives: switching to UP code [ 12.745179] Early unpacking initramfs... done [ 13.603145] ACPI: Core revision 20070126 [ 13.603248] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 13.659491] Using local APIC timer interrupts. [ 13.705008] APIC timer calibration result 12468744 [ 13.705012] Detected 12.468 MHz APIC timer. [ 13.705173] SMP alternatives: switching to SMP code [ 13.706563] Booting processor 1/2 APIC 0x1 [ 13.717725] Initializing CPU#1 [ 13.796897] Calibrating delay using timer specific routine.. 4389.08 BogoMIPS (lpj=8778176) [ 13.796911] CPU: L1 I cache: 32K, L1 D cache: 32K [ 13.796914] CPU: L2 cache: 4096K [ 13.796919] CPU 1/1 -> Node 0 [ 13.796922] CPU: Physical Processor ID: 0 [ 13.796924] CPU: Processor Core ID: 1 [ 13.796937] CPU1: Thermal monitoring enabled (TM2) [ 13.798109] Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b [ 13.798146] Brought up 2 CPUs [ 13.798283] CPU0 attaching sched-domain: [ 13.798288] domain 0: span 03 [ 13.798291] groups: 01 02 [ 13.798297] domain 1: span 03 [ 13.798300] groups: 03 [ 13.798305] CPU1 attaching sched-domain: [ 13.798308] domain 0: span 03 [ 13.798311] groups: 02 01 [ 13.798316] domain 1: span 03 [ 13.798319] groups: 03 [ 13.798741] net_namespace: 120 bytes [ 13.799571] Time: 9:20:13 Date: 04/24/08 [ 13.799620] NET: Registered protocol family 16 [ 13.800016] ACPI: bus type pci registered [ 13.800170] PCI: Using configuration type 1 [ 13.803087] ACPI: EC: Look up EC in DSDT [ 13.807616] ACPI: BIOS _OSI(Linux) query ignored via DMI [ 13.807621] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org [ 13.810919] ACPI: Interpreter enabled [ 13.810924] ACPI: (supports S0 S3 S4 S5) [ 13.810956] ACPI: Using IOAPIC for interrupt routing [ 13.834915] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 13.834921] ACPI: EC: driver started in poll mode [ 13.835014] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 13.836662] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 13.836669] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 13.839018] PCI: Transparent bridge - 0000:00:1e.0 [ 13.839191] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 13.840138] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 13.840481] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 13.840793] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 13.841160] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 13.841525] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 13.860716] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 13.860970] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 13.861207] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 13.861441] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 13.861675] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 13.861907] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 13.862141] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 13.862372] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 13.862701] Linux Plug and Play Support v0.97 (c) Adam Belay [ 13.862765] pnp: PnP ACPI init [ 13.862779] ACPI: bus type pnp registered [ 13.870742] pnpacpi: exceeded the max number of IRQ resources: 2 [ 13.870747] pnp: IRQ 9 override to level, high [ 13.875181] pnp: PnP ACPI: found 12 devices [ 13.875186] ACPI: ACPI bus type pnp unregistered [ 13.875678] PCI: Using ACPI for IRQ routing [ 13.875683] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 13.884846] NET: Registered protocol family 8 [ 13.884850] NET: Registered protocol family 20 [ 13.884919] PCI-GART: No AMD northbridge found. [ 13.884928] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 13.884936] hpet0: 3 64-bit timers, 14318180 Hz [ 13.886002] AppArmor: AppArmor Filesystem Enabled [ 13.888776] Time: hpet clocksource has been installed. [ 13.888792] Switched to high resolution mode on CPU 0 [ 13.890018] Switched to high resolution mode on CPU 1 [ 13.896771] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 13.896778] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 13.896784] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 13.896789] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 13.896795] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 13.896801] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 13.896806] system 00:01: iomem range 0x0-0x0 could not be reserved [ 13.896812] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved [ 13.896828] system 00:07: ioport range 0x680-0x69f has been reserved [ 13.896833] system 00:07: ioport range 0x800-0x80f has been reserved [ 13.896838] system 00:07: ioport range 0x1000-0x107f has been reserved [ 13.896843] system 00:07: ioport range 0x1180-0x11bf has been reserved [ 13.896849] system 00:07: ioport range 0x1640-0x164f has been reserved [ 13.896854] system 00:07: ioport range 0xfe00-0xfe00 has been reserved [ 13.897696] PCI: Bridge: 0000:00:1c.0 [ 13.897702] IO window: 2000-2fff [ 13.897712] MEM window: f6000000-f7ffffff [ 13.897720] PREFETCH window: f0000000-f1ffffff [ 13.897730] PCI: Bridge: 0000:00:1c.1 [ 13.897735] IO window: 3000-3fff [ 13.897745] MEM window: f8000000-f9ffffff [ 13.897752] PREFETCH window: f2000000-f3ffffff [ 13.897763] PCI: Bridge: 0000:00:1c.2 [ 13.897768] IO window: 4000-4fff [ 13.897778] MEM window: fa000000-fbffffff [ 13.897786] PREFETCH window: f4000000-f5ffffff [ 13.897795] PCI: Bridge: 0000:00:1c.3 [ 13.897800] IO window: 5000-5fff [ 13.897810] MEM window: c8000000-c9ffffff [ 13.897817] PREFETCH window: cc000000-cdffffff [ 13.897837] PCI: Bus 10, cardbus bridge: 0000:09:04.0 [ 13.897840] IO window: 00001400-000014ff [ 13.897849] IO window: 00006000-000060ff [ 13.897857] PREFETCH window: c4000000-c7ffffff [ 13.897865] MEM window: 140000000-143ffffff [ 13.897874] PCI: Bridge: 0000:00:1e.0 [ 13.897876] IO window: disabled. [ 13.897886] MEM window: fc200000-fc2fffff [ 13.897893] PREFETCH window: disabled. [ 13.897943] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 13.897955] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 13.897995] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 13.898005] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 13.898044] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 13.898055] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 13.898094] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 13.898104] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 13.898127] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 13.898157] ACPI: PCI Interrupt 0000:09:04.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 13.898179] NET: Registered protocol family 2 [ 13.932980] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 13.935631] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 13.943654] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 13.944889] TCP: Hash tables configured (established 524288 bind 65536) [ 13.944895] TCP reno registered [ 13.956943] checking if image is initramfs... it is [ 15.640722] Freeing initrd memory: 7512k freed [ 15.647113] Simple Boot Flag at 0x36 set to 0x1 [ 15.648789] audit: initializing netlink socket (disabled) [ 15.648827] audit(1209028815.112:1): initialized [ 15.653314] VFS: Disk quotas dquot_6.5.1 [ 15.653452] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 15.653690] io scheduler noop registered [ 15.653694] io scheduler anticipatory registered [ 15.653698] io scheduler deadline registered [ 15.653909] io scheduler cfq registered (default) [ 15.653928] Boot video device is 0000:00:02.0 [ 15.663406] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 15.663500] assign_interrupt_mode Found MSI capability [ 15.663579] Allocate Port Service[0000:00:1c.0:pcie00] [ 15.663652] Allocate Port Service[0000:00:1c.0:pcie02] [ 15.663823] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 15.663915] assign_interrupt_mode Found MSI capability [ 15.663988] Allocate Port Service[0000:00:1c.1:pcie00] [ 15.664052] Allocate Port Service[0000:00:1c.1:pcie02] [ 15.664222] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 15.664313] assign_interrupt_mode Found MSI capability [ 15.664386] Allocate Port Service[0000:00:1c.2:pcie00] [ 15.664447] Allocate Port Service[0000:00:1c.2:pcie02] [ 15.664621] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 15.664712] assign_interrupt_mode Found MSI capability [ 15.664786] Allocate Port Service[0000:00:1c.3:pcie00] [ 15.664851] Allocate Port Service[0000:00:1c.3:pcie02] [ 15.715005] Real Time Clock Driver v1.12ac [ 15.715454] hpet_resources: 0xfed00000 is busy [ 15.715502] Linux agpgart interface v0.102 [ 15.715507] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 15.717691] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 15.717818] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 15.718003] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 15.720699] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 15.720708] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 15.730401] mice: PS/2 mouse device common for all mice [ 15.730473] cpuidle: using governor ladder [ 15.730477] cpuidle: using governor menu [ 15.730732] NET: Registered protocol family 1 [ 15.730823] registered taskstats version 1 [ 15.731036] Magic number: 4:16:324 [ 15.731052] hash matches device ttyyd [ 15.731122] hash matches device tty49 [ 15.731147] hash matches device PNP0B00:00 [ 15.731163] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 15.731168] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 15.731172] EDD information not available. [ 15.731183] Freeing unused kernel memory: 316k freed [ 15.767360] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 17.121912] fuse init (API version 7.9) [ 17.159901] ACPI: SSDT BF6BFCD9, 027A (r1 Sony VAIO 20070905 PTL 20050624) [ 17.160411] ACPI: SSDT BF6BF63B, 0619 (r1 Sony VAIO 20070905 PTL 20050624) [ 17.166902] Monitor-Mwait will be used to enter C-1 state [ 17.166909] Monitor-Mwait will be used to enter C-2 state [ 17.167094] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 17.167103] ACPI: Processor [CPU0] (supports 8 throttling states) [ 17.167644] ACPI: SSDT BF6BFF53, 00C8 (r1 Sony VAIO 20070905 PTL 20050624) [ 17.168120] ACPI: SSDT BF6BFC54, 0085 (r1 Sony VAIO 20070905 PTL 20050624) [ 17.172088] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 17.172097] ACPI: Processor [CPU1] (supports 8 throttling states) [ 17.182605] ACPI: Thermal Zone [ATF0] (29 C) [ 17.184043] ACPI: Thermal Zone [DTS0] (23 C) [ 17.185539] ACPI: Thermal Zone [DTS1] (25 C) [ 17.611657] usbcore: registered new interface driver usbfs [ 17.611699] usbcore: registered new interface driver hub [ 17.628952] usbcore: registered new device driver usb [ 17.647608] USB Universal Host Controller Interface driver v3.0 [ 17.647692] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 17.647712] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 17.647719] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 17.648137] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 17.648185] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820 [ 17.648439] usb usb1: configuration #1 chosen from 1 choice [ 17.648483] hub 1-0:1.0: USB hub found [ 17.648495] hub 1-0:1.0: 2 ports detected [ 17.755535] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 20 (level, low) -> IRQ 20 [ 17.755558] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 17.755565] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 17.755622] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 17.755662] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001840 [ 17.755876] usb usb2: configuration #1 chosen from 1 choice [ 17.755920] hub 2-0:1.0: USB hub found [ 17.755932] hub 2-0:1.0: 2 ports detected [ 17.859432] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 20 (level, low) -> IRQ 20 [ 17.861862] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 17.861874] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 17.861958] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3 [ 17.865908] ehci_hcd 0000:00:1a.7: debug port 1 [ 17.865919] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 17.865931] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfc504800 [ 17.880202] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 17.880424] usb usb3: configuration #1 chosen from 1 choice [ 17.880474] hub 3-0:1.0: USB hub found [ 17.880488] hub 3-0:1.0: 4 ports detected [ 17.967280] SCSI subsystem initialized [ 17.984277] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 [ 17.986580] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 17.986591] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 17.986669] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 17.990619] ehci_hcd 0000:00:1d.7: debug port 1 [ 17.990630] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 17.990648] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504c00 [ 18.004028] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 18.004231] usb usb4: configuration #1 chosen from 1 choice [ 18.004282] hub 4-0:1.0: USB hub found [ 18.004295] hub 4-0:1.0: 6 ports detected [ 18.033739] libata version 3.00 loaded. [ 18.108242] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 18.108264] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 18.108272] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 18.108320] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 18.108363] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860 [ 18.108576] usb usb5: configuration #1 chosen from 1 choice [ 18.108621] hub 5-0:1.0: USB hub found [ 18.108633] hub 5-0:1.0: 2 ports detected [ 18.211930] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 23 (level, low) -> IRQ 23 [ 18.211951] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 18.211958] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 18.212001] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 18.212041] uhci_hcd 0000:00:1d.1: irq 23, io base 0x00001880 [ 18.212249] usb usb6: configuration #1 chosen from 1 choice [ 18.212298] hub 6-0:1.0: USB hub found [ 18.212311] hub 6-0:1.0: 2 ports detected [ 18.315781] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 23 (level, low) -> IRQ 23 [ 18.315800] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 18.315807] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 18.315850] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 18.315889] uhci_hcd 0000:00:1d.2: irq 23, io base 0x000018a0 [ 18.316090] usb usb7: configuration #1 chosen from 1 choice [ 18.316133] hub 7-0:1.0: USB hub found [ 18.316145] hub 7-0:1.0: 2 ports detected [ 18.419693] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22 [ 18.419757] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 18.419779] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 18.425269] ahci 0000:00:1f.2: version 3.0 [ 18.425312] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 22 [ 18.638202] usb 3-2: new high speed USB device using ehci_hcd and address 3 [ 18.773732] usb 3-2: configuration #1 chosen from 1 choice [ 19.013659] usb 4-4: new high speed USB device using ehci_hcd and address 2 [ 19.211659] usb 4-4: configuration #1 chosen from 1 choice [ 19.429087] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 19.429095] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part [ 19.429105] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 19.429543] scsi0 : ahci [ 19.429661] scsi1 : ahci [ 19.429769] scsi2 : ahci [ 19.429957] ata1: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504100 irq 507 [ 19.429964] ata2: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504180 irq 507 [ 19.429970] ata3: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504200 irq 507 [ 19.576986] usbcore: registered new interface driver libusual [ 19.585089] Initializing USB Mass Storage driver... [ 19.816510] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 19.905423] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 19.906562] ata1.00: ATA-7: ST91608220AS, 3.ALE, max UDMA/133 [ 19.906568] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 19.907847] ata1.00: configured for UDMA/133 [ 19.991346] usb 1-1: configuration #1 chosen from 1 choice [ 20.215989] ata2: SATA link down (SStatus 0 SControl 300) [ 20.231959] usb 7-1: new full speed USB device using uhci_hcd and address 2 [ 20.443293] usb 7-1: configuration #1 chosen from 1 choice [ 20.450332] scsi3 : SCSI emulation for USB Mass Storage devices [ 20.452000] usbcore: registered new interface driver usb-storage [ 20.452007] USB Mass Storage support registered. [ 20.452153] usb-storage: device found at 2 [ 20.452157] usb-storage: waiting for device to settle before scanning [ 20.528532] ata3: SATA link down (SStatus 0 SControl 300) [ 20.528752] scsi 0:0:0:0: Direct-Access ATA ST91608220AS 3.AL PQ: 0 ANSI: 5 [ 20.529439] ACPI: PCI Interrupt 0000:09:04.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 20.579615] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[fc206000-fc2067ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 20.579714] Driver 'sd' needs updating - please use bus_type methods [ 20.579832] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 20.579855] sd 0:0:0:0: [sda] Write Protect is off [ 20.579860] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 20.579893] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.579977] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 20.579996] sd 0:0:0:0: [sda] Write Protect is off [ 20.580000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 20.580033] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.580039] sda:<7>ata_piix 0000:00:1f.1: version 2.12 [ 20.580144] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22 [ 20.580209] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 20.581333] scsi4 : ata_piix [ 20.581662] sda1 sda2 sda3 sda4 <<6>scsi5 : ata_piix [ 20.585652] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 [ 20.585658] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 [ 20.595172] sda5 sda6 > [ 20.612679] sd 0:0:0:0: [sda] Attached SCSI disk [ 20.620625] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 20.903725] ata4.00: ATAPI: MATSHITADVD-RAM UJ-852S, 1.01, max UDMA/33 [ 21.076407] ata4.00: configured for UDMA/33 [ 21.244415] scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-852S 1.01 PQ: 0 ANSI: 5 [ 21.244549] scsi 4:0:0:0: Attached scsi generic sg1 type 5 [ 21.260968] Driver 'sr' needs updating - please use bus_type methods [ 21.268332] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 21.268339] Uniform CD-ROM driver Revision: 3.20 [ 21.268423] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 21.365756] Attempting manual resume [ 21.365762] swsusp: Resume From Partition 8:6 [ 21.365765] PM: Checking swsusp image. [ 21.365960] PM: Resume from disk failed. [ 21.387788] EXT3-fs: INFO: recovery required on readonly filesystem. [ 21.387795] EXT3-fs: write access will be enabled during recovery. [ 21.845880] ieee1394: Host added: ID:BUS[0-00:1023] GUID[080046030293d09b] [ 23.828189] kjournald starting. Commit interval 5 seconds [ 23.828212] EXT3-fs: sda5: orphan cleanup on readonly fs [ 23.828221] ext3_orphan_cleanup: deleting unreferenced inode 670438 [ 23.828265] ext3_orphan_cleanup: deleting unreferenced inode 670437 [ 23.828278] ext3_orphan_cleanup: deleting unreferenced inode 670436 [ 23.828291] ext3_orphan_cleanup: deleting unreferenced inode 670435 [ 23.828303] ext3_orphan_cleanup: deleting unreferenced inode 670434 [ 23.828314] EXT3-fs: sda5: 5 orphan inodes deleted [ 23.828317] EXT3-fs: recovery complete. [ 23.835100] EXT3-fs: mounted filesystem with ordered data mode. [ 25.447995] usb-storage: device scan complete [ 25.452223] scsi 3:0:0:0: Direct-Access Sony USB HS-CARD 4.82 PQ: 0 ANSI: 0 [ 25.456867] sd 3:0:0:0: [sdb] Attached SCSI removable disk [ 25.456929] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 35.460596] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 35.461955] shpchp: Unknown symbol acpi_run_oshp [ 35.462073] shpchp: Unknown symbol pci_hp_change_slot_info [ 35.462214] shpchp: Unknown symbol pci_hp_register [ 35.462562] shpchp: Unknown symbol pci_hp_deregister [ 35.462828] shpchp: Unknown symbol acpi_get_hp_params_from_firmware [ 35.554500] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 35.814230] agpgart: Detected an Intel 965GM Chipset. [ 35.818383] agpgart: Detected 7676K stolen memory. [ 35.912571] agpgart: AGP aperture is 256M @ 0xd0000000 [ 35.990630] iTCO_vendor_support: vendor-support=0 [ 36.026652] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 36.026831] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware [ 36.026852] iTCO_wdt: No card detected [ 36.409792] input: Power Button (CM) as /devices/virtual/input/input2 [ 36.450414] ACPI: Power Button (CM) [PWRB] [ 36.450592] input: Lid Switch as /devices/virtual/input/input3 [ 36.452714] ACPI: Lid Switch [LID0] [ 36.540584] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 36.540627] PCI: Setting latency timer of device 0000:07:00.0 to 64 [ 36.542948] sky2 0000:07:00.0: v1.20 addr 0xfa000000 irq 18 Yukon-EC Ultra (0xb4) rev 3 [ 36.544689] sky2 eth0: addr 00:1a:80:57:41:ac [ 36.948832] Yenta: CardBus bridge found at 0000:09:04.0 [104d:9008] [ 36.948867] Yenta: Enabling burst memory read transactions [ 36.948877] Yenta: Using CSCINT to route CSC interrupts to PCI [ 36.948880] Yenta: Routing CardBus interrupts to PCI [ 36.948890] Yenta TI: socket 0000:09:04.0, mfunc 0x01a21b22, devctl 0x64 [ 37.121986] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4 [ 37.144419] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 37.181404] Yenta: ISA IRQ mask 0x0cf8, PCI irq 20 [ 37.181411] Socket status: 30000006 [ 37.181416] Yenta: Raising subordinate bus# of parent bus (#09) from #0a to #0d [ 37.181426] pcmcia: parent PCI bridge Memory window: 0xfc200000 - 0xfc2fffff [ 37.224357] ACPI: PCI Interrupt 0000:09:04.2[C] -> GSI 22 (level, low) -> IRQ 22 [ 37.457458] sony-laptop: Sony Programmable IO Control Driver v0.5. [ 37.457474] sony-laptop: detected Type2 model [ 37.473470] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:3a/SNY6001:00/input/input5 [ 37.504098] input: Sony Vaio Jogdial as /devices/virtual/input/input6 [ 37.531974] sony-laptop: device allocated minor is 63 [ 37.540478] sony-laptop: Sony Notebook Control Driver v0.5. [ 37.714034] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 37.716284] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 38.177733] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.25 [ 38.177740] iwl4965: Copyright(c) 2003-2007 Intel Corporation [ 38.177897] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 38.177912] PCI: Setting latency timer of device 0000:06:00.0 to 64 [ 38.180058] iwl4965: Detected Intel Wireless WiFi Link 4965AGN [ 38.333399] ACPI: AC Adapter [ACAD] (on-line) [ 38.370207] wmaster0: Selected rate control algorithm 'iwl-4965-rs' [ 38.376148] input: PS/2 Mouse as /devices/virtual/input/input7 [ 38.406832] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8 [ 38.490679] ACPI: Battery Slot [BAT1] (battery present) [ 38.879962] ACPI: PCI interrupt for device 0000:06:00.0 disabled [ 38.909671] Linux video capture interface: v2.00 [ 38.938065] Bluetooth: Core ver 2.11 [ 38.956396] NET: Registered protocol family 31 [ 38.956402] Bluetooth: HCI device and connection manager initialized [ 38.956410] Bluetooth: HCI socket layer initialized [ 38.974068] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 39.093767] Bluetooth: HCI USB driver ver 2.9 [ 39.096679] usbcore: registered new interface driver hci_usb [ 39.152367] uvcvideo: Found UVC 1.00 device (05ca:183a) [ 39.152634] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26). [ 39.152880] uvcvideo: Failed to query (129) UVC control 1 (unit 0) : -32 (exp. 26). [ 39.152885] uvcvideo: Failed to initialize the device (-5). [ 39.152932] usbcore: registered new interface driver uvcvideo [ 39.152938] USB Video Class driver (v0.1.0) [ 39.476339] usbcam: registering driver r5u870 0.11.0 [ 39.476408] r5u870-0: Detected Sony VGP-VCC7 [ 39.476412] r5u870-0: requesting microcode state [ 39.477192] r5u870-0: camera reports negative microcode state [ 39.477197] r5u870-0: loading microcode file "r5u870_183a.fw" [ 39.528759] tpm_inf_pnp 00:09: Found with ID IFX0102 [ 42.235799] r5u870-0: enabling microcode [ 42.235908] r5u870-0: requesting microcode version [ 42.236038] r5u870-0: camera reports version 0111 [ 42.236047] r5u870-0: interface 1 already claimed [ 42.236055] r5u870-0: Found format 1: YUYV (4 frames) [ 42.236060] r5u870-0: Found resolution 1: 640x480 ival 666666 (18432000 B/s) [ 42.236066] r5u870-0: Found resolution 2: 320x240 ival 666666 (4608000 B/s) [ 42.236071] r5u870-0: Found resolution 3: 176x144 ival 666666 (1520640 B/s) [ 42.236076] r5u870-0: Found resolution 4: 160x120 ival 666666 (1152000 B/s) [ 42.237284] r5u870-0: Found UVC control Hue [-180,180] def:0 info:03 [ 42.239523] r5u870-0: Added 8 WDM controls [ 42.239529] r5u870-0: control Hue/uvc 06 <= 0 [ 42.239634] r5u870-0: control White Balance Red <= 127 [capture off] [ 42.239639] r5u870-0: control White Balance Green <= 127 [capture off] [ 42.239643] r5u870-0: control White Balance Blue <= 127 [capture off] [ 42.239647] r5u870-0: control Auto White Balance <= 1 [capture off] [ 42.239652] r5u870-0: control V-Flip <= 0 [capture off] [ 42.239655] r5u870-0: control H-Flip <= 0 [capture off] [ 42.239659] r5u870-0: control Privacy <= 0 [capture off] [ 42.239663] r5u870-0: control Night Mode <= 0 [capture off] [ 42.239722] r5u870-0: registered as video0 [ 42.239764] usbcore: registered new interface driver r5u870 [ 42.556603] lp: driver loaded but no devices found [ 42.816844] Adding 4096532k swap on /dev/sda6. Priority:-1 extents:1 across:4096532k [ 43.394726] EXT3 FS on sda5, internal journal [ 46.436983] kjournald starting. Commit interval 5 seconds [ 46.437337] EXT3 FS on sda2, internal journal [ 46.437345] EXT3-fs: mounted filesystem with ordered data mode. [ 46.443950] kjournald starting. Commit interval 5 seconds [ 46.444311] EXT3 FS on sda3, internal journal [ 46.444318] EXT3-fs: mounted filesystem with ordered data mode. [ 47.294580] ip_tables: (C) 2000-2006 Netfilter Core Team