[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #39-Ubuntu SMP Wed Jul 28 06:07:29 UTC 2010 (Ubuntu 2.6.32-24.39-generic 2.6.32.15+drm33.5) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bff70000 (usable) [ 0.000000] BIOS-e820: 00000000bff70000 - 00000000bff72000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bff72000 - 00000000bff93000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bff93000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0xbff70 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 00000000000a0000 (usable) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bff70000 (usable) [ 0.000000] modified: 00000000bff70000 - 00000000bff72000 (ACPI NVS) [ 0.000000] modified: 00000000bff72000 - 00000000bff93000 (ACPI data) [ 0.000000] modified: 00000000bff93000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fecf0000 - 00000000fecf1000 (reserved) [ 0.000000] modified: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] modified: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 37858000 - 37fefdc8 [ 0.000000] Allocated new RAMDISK: 008e0000 - 01077dc8 [ 0.000000] Move RAMDISK from 0000000037858000 - 0000000037fefdc7 to 008e0000 - 01077dc7 [ 0.000000] ACPI: RSDP 000feba0 00014 (v00 DELL ) [ 0.000000] ACPI: RSDT 000fd1ae 00034 (v01 DELL 4600i 00000007 ASL 00000061) [ 0.000000] ACPI: FACP 000fd1e2 00074 (v01 DELL 4600i 00000007 ASL 00000061) [ 0.000000] ACPI: DSDT fffceeb8 024C9 (v01 DELL dt_ex 00001000 MSFT 0100000D) [ 0.000000] ACPI: FACS bff70000 00040 [ 0.000000] ACPI: SSDT fffd14be 000BA (v01 DELL st_ex 00001000 MSFT 0100000D) [ 0.000000] ACPI: APIC 000fd256 0006C (v01 DELL 4600i 00000007 ASL 00000061) [ 0.000000] ACPI: BOOT 000fd2c2 00028 (v01 DELL 4600i 00000007 ASL 00000061) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2183MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008dbeb8] TEXT DATA BSS ==> [0000100000 - 00008dbeb8] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00008dc000 - 00008df188] BRK ==> [00008dc000 - 00008df188] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008e0000 - 0001077dc8] NEW RAMDISK ==> [00008e0000 - 0001077dc8] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00fe710] fe710 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000bff70 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x000bff70 [ 0.000000] On node 0 totalpages: 786188 [ 0.000000] free_area_init_node: node 0, pgdat c0798780, node_mem_map c1079000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3964 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4367 pages used for memmap [ 0.000000] HighMem zone: 554595 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36056 r0 d21288 u1048576 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780045 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=41ce0d97-d914-4217-bacc-e312ac205abe ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 15725760 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000bff70) [ 0.000000] Memory: 3086756k/3145152k available (4679k kernel code, 56896k reserved, 2116k data, 660k init, 2235848k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0848000 ( 660 kB) [ 0.000000] .data : 0xc0591d43 - 0xc07a2e88 (2116 kB) [ 0.000000] .text : 0xc0100000 - 0xc0591d43 (4679 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2659.931 MHz processor. [ 0.008007] Calibrating delay loop (skipped), value calculated using timer frequency.. 5319.86 BogoMIPS (lpj=10639724) [ 0.008031] Security Framework initialized [ 0.008063] AppArmor: AppArmor initialized [ 0.008074] Mount-cache hash table entries: 512 [ 0.008261] Initializing cgroup subsys ns [ 0.008268] Initializing cgroup subsys cpuacct [ 0.008274] Initializing cgroup subsys memory [ 0.008283] Initializing cgroup subsys devices [ 0.008287] Initializing cgroup subsys freezer [ 0.008290] Initializing cgroup subsys net_cls [ 0.008320] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.008325] CPU: L2 cache: 512K [ 0.008328] CPU: Hyper-Threading is disabled [ 0.008333] mce: CPU supports 4 MCE banks [ 0.008347] CPU0: Thermal monitoring enabled (TM1) [ 0.008360] Performance Events: no PMU driver, software events only. [ 0.008370] Checking 'hlt' instruction... OK. [ 0.024982] SMP alternatives: switching to UP code [ 0.036621] ACPI: Core revision 20090903 [ 0.073978] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.073985] ftrace: allocating 21780 entries in 43 pages [ 0.076092] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.076393] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.118166] CPU0: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 09 [ 0.120001] Brought up 1 CPUs [ 0.120001] Total of 1 processors activated (5319.86 BogoMIPS). [ 0.120001] CPU0 attaching NULL sched-domain. [ 0.120001] devtmpfs: initialized [ 0.120001] regulator: core version 0.5 [ 0.120001] Time: 15:48:08 Date: 08/10/10 [ 0.120001] NET: Registered protocol family 16 [ 0.120001] EISA bus registered [ 0.120001] ACPI: bus type pci registered [ 0.120001] PCI: PCI BIOS revision 2.10 entry at 0xfbb0c, last bus=2 [ 0.120001] PCI: Using configuration type 1 for base access [ 0.120001] bio: create slab at 0 [ 0.120001] ACPI: EC: Look up EC in DSDT [ 0.150735] ACPI: Interpreter enabled [ 0.150756] ACPI: (supports S0 S1 S3 S4 S5) [ 0.150784] ACPI: Using IOAPIC for interrupt routing [ 0.177408] ACPI: No dock devices found. [ 0.178863] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.178913] pci 0000:00:00.0: Enabling MCH 'Overflow' Device [ 0.178925] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff] [ 0.179030] pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff] [ 0.179130] pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f] [ 0.179188] pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f] [ 0.179244] pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f] [ 0.179301] pci 0000:00:1d.3: reg 20 io port: [0xff20-0xff3f] [ 0.179366] pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa80800-0xffa80bff] [ 0.179427] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.179432] pci 0000:00:1d.7: PME# disabled [ 0.179525] pci 0000:00:1f.0: HPET at 0xfed00000 [ 0.179532] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO [ 0.179536] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH4 GPIO [ 0.179562] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7] [ 0.179569] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7] [ 0.179577] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177] [ 0.179585] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377] [ 0.179592] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] [ 0.179600] pci 0000:00:1f.1: reg 24 32bit mmio: [0xfebffc00-0xfebfffff] [ 0.179633] pci 0000:00:1f.2: reg 10 io port: [0xfe00-0xfe07] [ 0.179640] pci 0000:00:1f.2: reg 14 io port: [0xfe10-0xfe13] [ 0.179647] pci 0000:00:1f.2: reg 18 io port: [0xfe20-0xfe27] [ 0.179654] pci 0000:00:1f.2: reg 1c io port: [0xfe30-0xfe33] [ 0.179661] pci 0000:00:1f.2: reg 20 io port: [0xfea0-0xfeaf] [ 0.179716] pci 0000:00:1f.3: reg 20 io port: [0xeda0-0xedbf] [ 0.179766] pci 0000:00:1f.5: reg 10 io port: [0xee00-0xeeff] [ 0.179774] pci 0000:00:1f.5: reg 14 io port: [0xedc0-0xedff] [ 0.179781] pci 0000:00:1f.5: reg 18 32bit mmio: [0xfebffa00-0xfebffbff] [ 0.179789] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xfebff900-0xfebff9ff] [ 0.179820] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.179825] pci 0000:00:1f.5: PME# disabled [ 0.179868] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] [ 0.179875] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xf0000000-0xf7ffffff] [ 0.179895] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfea00000-0xfea1ffff] [ 0.179955] pci 0000:00:01.0: bridge 32bit mmio: [0xfd000000-0xfeafffff] [ 0.179960] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff] [ 0.180015] pci 0000:02:00.0: reg 10 32bit mmio: [0xfcff8000-0xfcffffff] [ 0.180094] pci 0000:02:02.0: reg 10 io port: [0xdf00-0xdf3f] [ 0.180139] pci 0000:02:02.0: supports D1 D2 [ 0.180175] pci 0000:02:02.2: reg 10 32bit mmio: [0xfcff2800-0xfcff2fff] [ 0.180183] pci 0000:02:02.2: reg 14 32bit mmio: [0xfcff4000-0xfcff7fff] [ 0.180225] pci 0000:02:02.2: supports D1 D2 [ 0.180228] pci 0000:02:02.2: PME# supported from D0 D1 D2 D3hot [ 0.180233] pci 0000:02:02.2: PME# disabled [ 0.180278] pci 0000:02:08.0: reg 10 32bit mmio: [0xfcff3000-0xfcff3fff] [ 0.180285] pci 0000:02:08.0: reg 14 io port: [0xdf40-0xdf7f] [ 0.180325] pci 0000:02:08.0: supports D1 D2 [ 0.180328] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.180332] pci 0000:02:08.0: PME# disabled [ 0.180367] pci 0000:00:1e.0: transparent bridge [ 0.180372] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff] [ 0.180377] pci 0000:00:1e.0: bridge 32bit mmio: [0xfcf00000-0xfcffffff] [ 0.180393] pci_bus 0000:00: on NUMA node 0 [ 0.180399] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.180732] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.302587] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 0.302915] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15) [ 0.303243] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 0.303570] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 0.303895] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 0.304239] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 0.304565] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 0.304896] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 0.305088] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.305094] vgaarb: loaded [ 0.305254] SCSI subsystem initialized [ 0.305335] libata version 3.00 loaded. [ 0.305433] usbcore: registered new interface driver usbfs [ 0.305451] usbcore: registered new interface driver hub [ 0.305483] usbcore: registered new device driver usb [ 0.305647] ACPI: WMI: Mapper loaded [ 0.305650] PCI: Using ACPI for IRQ routing [ 0.305826] NetLabel: Initializing [ 0.305829] NetLabel: domain hash size = 128 [ 0.305831] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.305846] NetLabel: unlabeled traffic allowed by default [ 0.305979] hpet clockevent registered [ 0.305983] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.305989] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.305995] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.312027] Switching to clocksource tsc [ 0.314355] AppArmor: AppArmor Filesystem Enabled [ 0.314378] pnp: PnP ACPI init [ 0.314401] ACPI: bus type pnp registered [ 0.335964] pnp 00:09: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling [ 0.335970] pnp 00:09: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling [ 0.336698] pnp: PnP ACPI: found 10 devices [ 0.336701] ACPI: ACPI bus type pnp unregistered [ 0.336707] PnPBIOS: Disabled by ACPI PNP [ 0.336722] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.336727] system 00:00: iomem range 0x100000-0xffffff could not be reserved [ 0.336730] system 00:00: iomem range 0x1000000-0xbff6ffff could not be reserved [ 0.336734] system 00:00: iomem range 0xc0000-0xfffff could not be reserved [ 0.336738] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved [ 0.336742] system 00:00: iomem range 0xfee00000-0xfee0ffff has been reserved [ 0.336745] system 00:00: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.336749] system 00:00: iomem range 0xfecf0000-0xfecf0fff has been reserved [ 0.336753] system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.336756] system 00:00: iomem range 0xffc00000-0xffffffff has been reserved [ 0.336768] system 00:09: ioport range 0xc00-0xc7f has been reserved [ 0.371524] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.371527] pci 0000:00:01.0: IO window: disabled [ 0.371534] pci 0000:00:01.0: MEM window: 0xfd000000-0xfeafffff [ 0.371539] pci 0000:00:01.0: PREFETCH window: 0xf0000000-0xf7ffffff [ 0.371547] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.371551] pci 0000:00:1e.0: IO window: 0xd000-0xdfff [ 0.371557] pci 0000:00:1e.0: MEM window: 0xfcf00000-0xfcffffff [ 0.371561] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.371580] pci 0000:00:1e.0: setting latency timer to 64 [ 0.371586] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.371589] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.371593] pci_bus 0000:01: resource 1 mem: [0xfd000000-0xfeafffff] [ 0.371596] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf7ffffff] [ 0.371599] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] [ 0.371602] pci_bus 0000:02: resource 1 mem: [0xfcf00000-0xfcffffff] [ 0.371605] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.371608] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.371654] NET: Registered protocol family 2 [ 0.371775] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.372224] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.373109] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.373688] TCP: Hash tables configured (established 131072 bind 65536) [ 0.373692] TCP reno registered [ 0.373858] NET: Registered protocol family 1 [ 0.373988] pci 0000:01:00.0: Boot video device [ 0.374004] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling [ 0.374117] Simple Boot Flag value 0x87 read from CMOS RAM was invalid [ 0.374120] Simple Boot Flag at 0x7a set to 0x1 [ 0.374228] cpufreq-nforce2: No nForce2 chipset. [ 0.374267] Scanning for low memory corruption every 60 seconds [ 0.374409] audit: initializing netlink socket (disabled) [ 0.374422] type=2000 audit(1281455288.371:1): initialized [ 0.382648] Trying to unpack rootfs image as initramfs... [ 0.392297] highmem bounce pool size: 64 pages [ 0.392305] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.400009] VFS: Disk quotas dquot_6.5.2 [ 0.400112] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.400883] fuse init (API version 7.13) [ 0.400995] msgmni has been set to 1664 [ 0.401264] alg: No test for stdrng (krng) [ 0.401347] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.401351] io scheduler noop registered [ 0.401354] io scheduler anticipatory registered [ 0.401356] io scheduler deadline registered [ 0.401406] io scheduler cfq registered (default) [ 0.401550] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.401581] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.401695] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.401706] ACPI: Power Button [VBTN] [ 0.401769] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.401772] ACPI: Power Button [PWRF] [ 0.402010] processor LNXCPU:00: registered as cooling_device0 [ 0.444411] isapnp: Scanning for PnP cards... [ 0.450206] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.450310] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.450726] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.452080] brd: module loaded [ 0.452667] loop: module loaded [ 0.452795] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.452933] ata_piix 0000:00:1f.1: version 2.13 [ 0.452951] alloc irq_desc for 18 on node -1 [ 0.452954] alloc kstat_irqs on node -1 [ 0.452963] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.453019] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.456087] scsi0 : ata_piix [ 0.499803] scsi1 : ata_piix [ 0.499848] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.499852] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.499883] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.499889] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] [ 0.499954] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.500035] scsi2 : ata_piix [ 0.503978] scsi3 : ata_piix [ 0.504053] ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 18 [ 0.504057] ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 18 [ 0.504562] Fixed MDIO Bus: probed [ 0.504612] PPP generic driver version 2.4.2 [ 0.504698] tun: Universal TUN/TAP device driver, 1.6 [ 0.504701] tun: (C) 1999-2004 Max Krasnyansky [ 0.504824] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.504853] alloc irq_desc for 23 on node -1 [ 0.504857] alloc kstat_irqs on node -1 [ 0.504866] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.504886] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.504890] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.504930] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.504966] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.508840] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported [ 0.509107] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffa80800 [ 0.528152] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.528319] usb usb1: configuration #1 chosen from 1 choice [ 0.528360] hub 1-0:1.0: USB hub found [ 0.528373] hub 1-0:1.0: 8 ports detected [ 0.528462] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.528483] uhci_hcd: USB Universal Host Controller Interface driver [ 0.528540] alloc irq_desc for 16 on node -1 [ 0.528543] alloc kstat_irqs on node -1 [ 0.528552] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.528564] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.528568] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.528619] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.528658] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff80 [ 0.528769] usb usb2: configuration #1 chosen from 1 choice [ 0.528804] hub 2-0:1.0: USB hub found [ 0.528814] hub 2-0:1.0: 2 ports detected [ 0.528866] alloc irq_desc for 19 on node -1 [ 0.528869] alloc kstat_irqs on node -1 [ 0.528875] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.528882] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.528886] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.528933] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.528963] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60 [ 0.529069] usb usb3: configuration #1 chosen from 1 choice [ 0.529103] hub 3-0:1.0: USB hub found [ 0.529114] hub 3-0:1.0: 2 ports detected [ 0.529165] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.529172] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.529176] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.529216] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.529240] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 [ 0.529354] usb usb4: configuration #1 chosen from 1 choice [ 0.529388] hub 4-0:1.0: USB hub found [ 0.529398] hub 4-0:1.0: 2 ports detected [ 0.529449] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.529457] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.529460] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.529499] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.529523] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ff20 [ 0.529633] usb usb5: configuration #1 chosen from 1 choice [ 0.529667] hub 5-0:1.0: USB hub found [ 0.529677] hub 5-0:1.0: 2 ports detected [ 0.529802] PNP: No PS/2 controller found. Probing ports directly. [ 0.537056] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.537071] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.537281] mice: PS/2 mouse device common for all mice [ 0.537440] rtc_cmos 00:05: RTC can wake from S4 [ 0.537496] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.537523] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs [ 0.537674] device-mapper: uevent: version 1.0.3 [ 0.537820] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.540147] device-mapper: multipath: version 1.1.0 loaded [ 0.540153] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.540355] EISA: Probing bus 0 at eisa.0 [ 0.540393] EISA: Detected 0 cards. [ 0.544361] cpuidle: using governor ladder [ 0.544366] cpuidle: using governor menu [ 0.544947] TCP cubic registered [ 0.545114] NET: Registered protocol family 10 [ 0.545666] lo: Disabled Privacy Extensions [ 0.546076] NET: Registered protocol family 17 [ 0.546146] Using IPI No-Shortcut mode [ 0.546273] PM: Resume from disk failed. [ 0.546288] registered taskstats version 1 [ 0.546577] Magic number: 6:142:841 [ 0.546660] rtc_cmos 00:05: setting system clock to 2010-08-10 15:48:08 UTC (1281455288) [ 0.546664] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.546666] EDD information not available. [ 0.696799] ata2.00: ATAPI: SAMSUNG CDRW/DVD SM-348B, T502, max UDMA/33 [ 0.704925] ata2.00: configured for UDMA/33 [ 0.704988] ata1.00: ATA-6: IC35L090AVV207-0, V23OA66A, max UDMA/100 [ 0.704991] ata1.00: 156250000 sectors, multi 8: LBA48 [ 0.728791] ata1.00: configured for UDMA/100 [ 0.871906] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 0.907688] Freeing initrd memory: 7775k freed [ 1.046973] isapnp: No Plug & Play device found [ 1.047191] scsi 0:0:0:0: Direct-Access ATA IC35L090AVV207-0 V23O PQ: 0 ANSI: 5 [ 1.047429] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.047651] sd 0:0:0:0: [sda] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.047711] sd 0:0:0:0: [sda] Write Protect is off [ 1.047716] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.047875] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.048031] scsi 1:0:0:0: CD-ROM SAMSUNG CDRW/DVD SM-348B T502 PQ: 0 ANSI: 5 [ 1.048355] sda:sr0: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray [ 1.050000] Uniform CD-ROM driver Revision: 3.20 [ 1.050128] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.050207] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.061079] sda1 sda2 < [ 1.065159] usb 1-1: configuration #1 chosen from 1 choice [ 1.080066] sda5 > [ 1.080413] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.232015] usb 1-4: new high speed USB device using ehci_hcd and address 4 [ 1.365002] usb 1-4: configuration #1 chosen from 1 choice [ 1.588015] usb 1-6: new high speed USB device using ehci_hcd and address 6 [ 1.721050] usb 1-6: configuration #1 chosen from 1 choice [ 1.960013] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 2.136106] usb 3-1: configuration #1 chosen from 1 choice [ 2.320131] Freeing unused kernel memory: 660k freed [ 2.320809] Write protecting the kernel text: 4680k [ 2.320842] Write protecting the kernel read-only data: 1840k [ 2.349394] udev: starting version 151 [ 2.376081] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 2.551150] usb 4-1: configuration #1 chosen from 1 choice [ 2.559049] hub 4-1:1.0: USB hub found [ 2.560042] hub 4-1:1.0: 3 ports detected [ 2.642251] Floppy drive(s): fd0 is 1.44M [ 2.661529] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 2.661535] e100: Copyright(c) 1999-2006 Intel Corporation [ 2.662106] FDC 0 is a post-1991 82077 [ 2.662390] Initializing USB Mass Storage driver... [ 2.664484] alloc irq_desc for 20 on node -1 [ 2.664488] alloc kstat_irqs on node -1 [ 2.664498] e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.693407] e100 0000:02:08.0: PME# disabled [ 2.693816] scsi4 : SCSI emulation for USB Mass Storage devices [ 2.694716] usb-storage: device found at 2 [ 2.694719] usb-storage: waiting for device to settle before scanning [ 2.694946] usbcore: registered new interface driver hiddev [ 2.695402] scsi5 : SCSI emulation for USB Mass Storage devices [ 2.695607] usbcore: registered new interface driver usb-storage [ 2.695613] USB Mass Storage support registered. [ 2.696138] usb-storage: device found at 6 [ 2.696142] usb-storage: waiting for device to settle before scanning [ 2.696933] e100: eth0: e100_probe: addr 0xfcff3000, irq 20, MAC addr 00:07:e9:4e:5a:c0 [ 2.696984] ohci1394 0000:02:02.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 2.709040] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input3 [ 2.709186] generic-usb 0003:046D:C044.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1/input0 [ 2.709221] usbcore: registered new interface driver usbhid [ 2.709225] usbhid: v2.6:USB HID core driver [ 2.752093] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fcff2800-fcff2fff] Max Packet=[2048] IR/IT contexts=[4/8] [ 2.793270] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 2.876055] usb 4-1.1: new full speed USB device using uhci_hcd and address 3 [ 3.013058] usb 4-1.1: configuration #1 chosen from 1 choice [ 3.023286] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1.1/4-1.1:1.0/input/input4 [ 3.023399] generic-usb 0003:413C:2010.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.2-1.1/input0 [ 3.030046] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1.1/4-1.1:1.1/input/input5 [ 3.030136] generic-usb 0003:413C:2010.0003: input,hidraw2: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:1d.2-1.1/input1 [ 4.024169] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c00a1020178] [ 7.692377] usb-storage: device scan complete [ 7.693063] scsi 4:0:0:0: Direct-Access WD 5000AAV External 1.65 PQ: 0 ANSI: 4 [ 7.693727] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 7.694400] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 7.695145] sd 4:0:0:0: [sdb] Write Protect is off [ 7.695150] sd 4:0:0:0: [sdb] Mode Sense: 21 00 00 00 [ 7.695153] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 7.696168] usb-storage: device scan complete [ 7.696529] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 7.696535] sdb: [ 7.696667] scsi 5:0:0:0: Direct-Access WD 3200BMV External 1.05 PQ: 0 ANSI: 4 [ 7.697185] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 7.697900] sd 5:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 7.698646] sd 5:0:0:0: [sdc] Write Protect is off [ 7.698650] sd 5:0:0:0: [sdc] Mode Sense: 21 00 00 00 [ 7.698653] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 7.700046] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 7.700052] sdc: sdc1 [ 11.719579] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 11.719584] sd 5:0:0:0: [sdc] Attached SCSI disk [ 13.135039] sdb1 [ 13.136629] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 13.136634] sd 4:0:0:0: [sdb] Attached SCSI disk [ 17.999549] Adding 3229024k swap on /dev/sda5. Priority:-1 extents:1 across:3229024k [ 18.124420] udev: starting version 151 [ 18.313377] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 18.378788] lp: driver loaded but no devices found [ 18.412800] intel_rng: Firmware space is locked read-only. If you can't or [ 18.412803] intel_rng: don't want to disable this in firmware setup, and if [ 18.412804] intel_rng: you are certain that your system has a functional [ 18.412806] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 18.413009] Linux agpgart interface v0.103 [ 18.591940] agpgart-intel 0000:00:00.0: Intel 865 Chipset [ 18.682473] parport_pc 00:08: reported by Plug and Play ACPI [ 18.682527] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 18.744306] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000 [ 18.772627] lp0: using parport0 (interrupt-driven). [ 18.851637] vga16fb: initializing [ 18.851643] vga16fb: mapped to 0xc00a0000 [ 18.851735] fb0: VGA16 VGA frame buffer device [ 18.858643] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 18.863299] ppdev: user-space parallel port driver [ 18.868101] dell-wmi: No known WMI GUID found [ 18.868785] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7F11 [ 18.868824] usbcore: registered new interface driver usblp [ 18.869914] cfg80211: Calling CRDA to update world regulatory domain [ 18.932864] cfg80211: World regulatory domain updated: [ 18.932870] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 18.932874] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 18.932877] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 18.932881] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 18.932884] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 18.932888] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.049822] type=1505 audit(1281473307.001:2): operation="profile_load" pid=553 name="/sbin/dhclient3" [ 19.050399] type=1505 audit(1281473307.001:3): operation="profile_load" pid=553 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 19.050720] type=1505 audit(1281473307.001:4): operation="profile_load" pid=553 name="/usr/lib/connman/scripts/dhclient-script" [ 19.060756] nvidia: module license 'NVIDIA' taints kernel. [ 19.060762] Disabling lock debugging due to kernel taint [ 20.051040] alloc irq_desc for 21 on node -1 [ 20.051043] alloc kstat_irqs on node -1 [ 20.051052] rt61pci 0000:02:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 20.108427] phy0: Selected rate control algorithm 'minstrel' [ 20.109313] Registered led device: rt61pci-phy0::radio [ 20.109334] Registered led device: rt61pci-phy0::assoc [ 20.235252] alloc irq_desc for 17 on node -1 [ 20.235256] alloc kstat_irqs on node -1 [ 20.235264] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 20.235312] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 20.241806] Console: switching to colour frame buffer device 80x30 [ 20.441819] EMU10K1_Audigy 0000:02:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 20.464346] Installing spdif_bug patch: SB Audigy 2 ZS [SB0353] [ 20.487941] type=1505 audit(1281473308.437:5): operation="profile_load" pid=708 name="/usr/share/gdm/guest-session/Xsession" [ 20.524715] type=1505 audit(1281473308.477:6): operation="profile_replace" pid=711 name="/sbin/dhclient3" [ 20.525313] type=1505 audit(1281473308.477:7): operation="profile_replace" pid=711 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 20.525636] type=1505 audit(1281473308.477:8): operation="profile_replace" pid=711 name="/usr/lib/connman/scripts/dhclient-script" [ 20.547880] type=1505 audit(1281473308.497:9): operation="profile_load" pid=714 name="/usr/bin/evince" [ 20.652673] type=1505 audit(1281473308.605:10): operation="profile_load" pid=714 name="/usr/bin/evince-previewer" [ 20.657184] rt61pci 0000:02:00.0: firmware: requesting rt2561s.bin [ 20.704052] intel8x0_measure_ac97_clock: measured 55282 usecs (2663 samples) [ 20.704057] intel8x0: clocking to 48000 [ 20.722402] type=1505 audit(1281473308.673:11): operation="profile_load" pid=714 name="/usr/bin/evince-thumbnailer" [ 20.758428] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 20.759754] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.22 Sun Nov 8 20:26:31 PST 2009 [ 20.797633] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 20.849159] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.852162] e100: eth0 NIC Link is Up 100 Mbps Full Duplex [ 20.852465] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 22.058715] agpgart-intel 0000:00:00.0: AGP 3.0 bridge [ 22.058734] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode [ 22.058775] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode [ 23.454739] usb 1-4: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 [ 31.260015] eth0: no IPv6 routers present [ 69.181104] usb 1-4: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 [106525.285081] usb 1-6: USB disconnect, address 6 [106525.285209] sd 5:0:0:0: [sdc] Unhandled error code [106525.285212] sd 5:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [106525.285217] sd 5:0:0:0: [sdc] CDB: Write(10): 2a 00 00 0b 73 bb 00 00 01 00 [106525.285229] end_request: I/O error, dev sdc, sector 750523 [106525.285234] __ratelimit: 12 callbacks suppressed [106525.285238] Buffer I/O error on device sdc1, logical block 750460 [106525.285241] lost page write due to I/O error on sdc1 [106532.300048] usb 1-6: new high speed USB device using ehci_hcd and address 7 [106532.433310] usb 1-6: configuration #1 chosen from 1 choice [106532.435524] scsi6 : SCSI emulation for USB Mass Storage devices [106532.452420] usb-storage: device found at 7 [106532.452424] usb-storage: waiting for device to settle before scanning [106537.452239] usb-storage: device scan complete [106537.452845] scsi 6:0:0:0: Direct-Access WD 3200BMV External 1.05 PQ: 0 ANSI: 4 [106537.456616] sd 6:0:0:0: Attached scsi generic sg3 type 0 [106537.457711] sd 6:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB) [106537.458583] sd 6:0:0:0: [sdc] Write Protect is off [106537.458589] sd 6:0:0:0: [sdc] Mode Sense: 21 00 00 00 [106537.458592] sd 6:0:0:0: [sdc] Assuming drive cache: write through [106537.468264] sd 6:0:0:0: [sdc] Assuming drive cache: write through [106537.468274] sdc: sdc1 [106537.508335] sd 6:0:0:0: [sdc] Assuming drive cache: write through [106537.508344] sd 6:0:0:0: [sdc] Attached SCSI disk [106549.992036] usb 1-7: new high speed USB device using ehci_hcd and address 8 [106550.127319] usb 1-7: configuration #1 chosen from 1 choice [106550.130008] scsi7 : SCSI emulation for USB Mass Storage devices [106550.146226] usb-storage: device found at 8 [106550.146230] usb-storage: waiting for device to settle before scanning [106555.144239] usb-storage: device scan complete [106555.145349] scsi 7:0:0:0: Direct-Access PNY USB 2.0 FD 0512 PQ: 0 ANSI: 0 CCS [106555.149731] sd 7:0:0:0: Attached scsi generic sg4 type 0 [106555.151455] sd 7:0:0:0: [sdd] 990208 512-byte logical blocks: (506 MB/483 MiB) [106555.152346] sd 7:0:0:0: [sdd] Write Protect is off [106555.152352] sd 7:0:0:0: [sdd] Mode Sense: 43 00 00 00 [106555.152356] sd 7:0:0:0: [sdd] Assuming drive cache: write through [106555.163590] sd 7:0:0:0: [sdd] Assuming drive cache: write through [106555.163601] sdd: sdd1 [106555.283570] sd 7:0:0:0: [sdd] Assuming drive cache: write through [106555.283579] sd 7:0:0:0: [sdd] Attached SCSI removable disk [106736.294300] type=1503 audit(1281580027.593:16): operation="open" pid=7597 parent=1 profile="/usr/bin/evince" requested_mask="r::" denied_mask="r::" fsuid=1000 ouid=1000 name=2F6D656469612F555342323046442F63616E6E696E6720636C61737365732E646F63 [106736.294757] type=1503 audit(1281580027.593:17): operation="open" pid=7597 parent=1 profile="/usr/bin/evince" requested_mask="r::" denied_mask="r::" fsuid=1000 ouid=1000 name=2F6D656469612F555342323046442F63616E6E696E6720636C61737365732E646F63 [106894.957277] usb 1-7: USB disconnect, address 8 [106910.234616] usb 1-4: USB disconnect, address 4 [106910.234881] usblp0: removed [427670.228319] usb 1-6: USB disconnect, address 7 [427670.228595] sd 6:0:0:0: [sdc] Unhandled error code [427670.228600] sd 6:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [427670.228605] sd 6:0:0:0: [sdc] CDB: Write(10): 2a 00 00 0b 73 bb 00 00 01 00 [427670.228616] end_request: I/O error, dev sdc, sector 750523 [427670.228623] Buffer I/O error on device sdc1, logical block 750460 [427670.228626] lost page write due to I/O error on sdc1 [427677.252042] usb 1-6: new high speed USB device using ehci_hcd and address 9 [427677.385172] usb 1-6: configuration #1 chosen from 1 choice [427677.387374] scsi8 : SCSI emulation for USB Mass Storage devices [427677.404913] usb-storage: device found at 9 [427677.404917] usb-storage: waiting for device to settle before scanning [427682.405451] usb-storage: device scan complete [427682.405957] scsi 8:0:0:0: Direct-Access WD 3200BMV External 1.05 PQ: 0 ANSI: 4 [427682.409293] sd 8:0:0:0: Attached scsi generic sg3 type 0 [427682.411562] sd 8:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB) [427682.412707] sd 8:0:0:0: [sdc] Write Protect is off [427682.412714] sd 8:0:0:0: [sdc] Mode Sense: 21 00 00 00 [427682.412718] sd 8:0:0:0: [sdc] Assuming drive cache: write through [427682.423467] sd 8:0:0:0: [sdc] Assuming drive cache: write through [427682.423478] sdc: sdc1 [427682.480602] sd 8:0:0:0: [sdc] Assuming drive cache: write through [427682.480611] sd 8:0:0:0: [sdc] Attached SCSI disk [458554.198583] plugin-containe[17119]: segfault at 4e5bb40c ip 4e5bb40c sp 4e5bb40c error 4