--- wodim.conf	2007-11-29 11:20:24.000000000 +0100
+++ wodim.conf.dpkg-dist	2007-01-09 19:39:51.000000000 +0100
@@ -1,41 +1,48 @@
-#ident @(#)cdrecord.dfl	1.4 02/07/07 Copyr 1998 J. Schilling
+# wodim.dfl Copyright 2006 E. Bloch
+# Based on cdrecord.dfl (Copyright 1998 J. Schilling)
 #
-# This file is /etc/default/cdrecord
+# This file is /etc/wodim.conf
 # It contains defaults that are used if no command line option
 # or environment is present.
 # 
-# The default device, if not specified elswhere
+# The default device, if not specified elsewhere.
 #
-CDR_DEVICE=/dev/cdrw
+#CDR_DEVICE=yamaha
+CDR_DEVICE=cdrom
 
 # 
-# The default speed, if not specified elswhere
+# The default speed, if not specified elswhere.
 #
-# Note that newer cdrecord versions do not default
-# to speed=1. For MMC compliant drives, the default
-# is to write at maximum speed, so it in general does
-# not make sense to set up a default speed in /etc/default/cdrecord 
+# For MMC compliant drives, the default is to write at maximum speed, so it in
+# general does not make sense to set up a default speed in /etc/wodim.conf.
 #
 #CDR_SPEED=40
 
 # 
-# The default FIFO size if, not specified elswhere
+# The default FIFO size if, not specified elswhere.
 #
-CDR_FIFOSIZE=4m
+CDR_FIFOSIZE=12m
 
 #
-# The following definitions allow abstract device names.
-# They are used if the device name does not contain the
-# the characters ',', ':', '/' and '@'
+# CDR_MAXFIFOSIZE can limit the maximum allowed FIFO size. This is useful to
+# not let mallicious users allocate too much system memory if no ulimit is set
+# or wodim runs with suid-root permissions.
 #
-# Unless you have a good reason, use speed == -1 and let
-# cdrecord use its internal drive specific defaults.
+# CDR_MAXFIFOSIZE=256m
+
+#
+# The following definitions allow abstract device names.  They are used if the
+# device name does not contain the the characters ',', ':', '/' and '@'
+#
+# Unless you have a good reason, use speed == -1 and let wodim use its internal
+# drive specific defaults.
 #
 # drive name	device	speed	fifosize driveropts
 #
-teac=		1,3,0	-1	-1	""
-panasonic=	1,4,0	-1	-1	""
-plextor=	1,4,0	-1	-1	""
-sanyo=		1,4,0	-1	-1	burnfree
-yamaha=		1,5,0	-1	-1	""
-cdrom=		0,6,0	2	1m	""
+#default=	USCSI:1,0,0	-1	-1	burnfree
+#sanyo=		1,4,0	-1	-1	burnfree
+#cdrom=		0,6,0	2	1m	""
+#remote=		REMOTE:rscsi@somehost:1,0,0	16	32m	burnfree
+#
+cdrom=          -1      -1      -1      burnfree
+