GnomeBaker won't blank mounted CD-RW

Bug #147191 reported by Aurélien COUDERC on 2007-09-30
16
This bug affects 2 people
Affects Status Importance Assigned to Milestone
cdrkit (Ubuntu)
Undecided
Unassigned
gnomebaker (Ubuntu)
Undecided
Unassigned
k3b (Ubuntu)
Undecided
Unassigned

Bug Description

Binary package hint: gnomebaker

GnomeBaker refuses to blank CD-RWs when they are mounted.

The error output is the following :
wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Error trying to open /dev/sr0 exclusively (Device or resource busy)... retrying in 1 second.
Error trying to open /dev/sr0 exclusively (Device or resource busy)... retrying in 1 second.
Error trying to open /dev/sr0 exclusively (Device or resource busy)... retrying in 1 second.
Error trying to open /dev/sr0 exclusively (Device or resource busy)... retrying in 1 second.
Error trying to open /dev/sr0 exclusively (Device or resource busy)... giving up.
wodim: Device or resource busy. TOC Type: 1 = CD-ROM

Cannot open SCSI driver!

I have to unmount the CD-RW manually using the command line (as the only GUI option is to eject the CD, which is not what I want).

hendrikwout (hendrikwout) wrote :
Download full text (3.2 KiB)

Hi,

After my upgrade from feisty to gutsy on my imac g3 , I tried to burn a cd with k3b and gnomebaker and I get similar problems. K3b has the following error message which looks similar:

System
-----------------------
K3b Version: 1.0.3

KDE Version: 3.5.7
QT Version: 3.3.7
Kernel: 2.6.22-12-powerpc
Devices
-----------------------
MATSHITA CD-ROM CR-1760 ZA0E (/dev/hdb, ) [CD-ROM] [Fout] [Geen]

MATSHITA CD-RW CW-7586 1.01 (/dev/scd0, ) [CD-R, CD-RW, CD-ROM] [Fout] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R]
Used versions
-----------------------
cdrecord: 1.1.6

cdrecord
-----------------------
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/scd0'
devname: '/dev/scd0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.6
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'MATSHITA'
Identification : 'CD-RW CW-7586 '
Revision : '1.01'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1467648 = 1433 KB
FIFO size : 12582912 = 12288 KB
Encoding speed : 131x (9799 sectors/s) for libedc from Heiko Eißfeldt
Speed set to 1411 KB/s
Track 01: data 724 MB
Total size: 696 MB (69:00.41) = 310531 sectors
Lout start: 696 MB (69:02/31) = 310531 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 6
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type C, low Beta category (C-) (6)
  ATIP start of lead in: -11231 (97:32/19)
  ATIP start of lead out: 359846 (79:59/71)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 27
Manufacturer: Prodisc Technology Inc.
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 49315
Starting to write CD/DVD at speed 8.0 in real RAW/RAW96R mode for single session.
Last chance to quit, starting real write in 2 seconds.
   1 seconds.
   0 seconds.
 Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
/usr/bin/wodim: WARNING: Drive returns wrong startsec (0) using -11231 from ATIP
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 FF FF D4 21 00 00 1A 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.005s timeout 40s
/usr/bin/wodim: Could not write Lead-in.
Writing lead-in at sector -11231
write leadin data: error after 0 bytes
Writing time: 3.621s
/usr/bin/wodim: fifo had 192 puts and 0 gets.
/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.

cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/scd0 speed...

Read more...

hendrikwout (hendrikwout) wrote :

Actually, my info has nothing to do with the fact that the cd is mounted. I'm making a new bug report.

Daniel T Chen (crimsun) wrote :

Is this symptom still reproducible in 8.10 RC or later?

Changed in gnomebaker:
status: New → Incomplete
Aurélien COUDERC (coucouf) wrote :

Nope, it's fixed in Intrepid.

Regis Leneveu (regisl67) wrote :

NO! This problem seems NOT fixed in Intrepid.
Here's an actual debbuging report from K3b:

System
-----------------------
K3b Version: 1.0.5

KDE Version: 3.5.10
QT Version: 3.3.8b
Kernel: 2.6.27-7-generic
Devices
-----------------------
MATSHITA DVD-RAM UJ862A SB04 (/dev/scd0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, Restricted Overwrite, Layer Jump]

Used versions
-----------------------
cdrecord: 1.1.8

cdrecord
-----------------------
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/scd0'
devname: '/dev/scd0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.8

Patrick Brueckner (madmuffin) wrote :

k3b seems to be unable on my jaunty laptop to write or erase any cd-rw.
cd-r work fine.

Changed in gnomebaker (Ubuntu):
status: Incomplete → Invalid
Changed in k3b (Ubuntu):
status: New → Invalid
Changed in cdrkit (Ubuntu):
status: New → Confirmed
To post a comment you must log in.
This report contains Public information  Edit
Everyone can see this information.

Other bug subscribers

Bug attachments