K3b 1.0: CD-R System ----------------------- K3b Version: 1.0 KDE Version: 3.5.6 QT Version: 3.3.7 Kernel: 2.6.20-15-generic Devices ----------------------- QSI DVD+-RW SDW-082 LX51 (/dev/scd0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R Sequential, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96R, RAW/R16, RAW/R96R, Restricted Overwrite] K3bIsoImager ----------------------- mkisofs print size result: 357483 (732125184 bytes) Pipe throughput: 276400896 bytes read, 276396544 bytes written. Used versions ----------------------- mkisofs: 1.1.2 cdrecord: 1.1.2 cdrecord ----------------------- scsidev: '/dev/scd0' devname: '/dev/scd0' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Wodim version: 1.1.2 SCSI buffer size: 64512 Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. TOC Type: 1 = CD-ROM Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'QSI ' Identification : 'DVD+-RW SDW-082 ' Revision : 'LX51' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0009 (CD-R) Profile: 0x002B (DVD+R/DL) Profile: 0x001B (DVD+R) Profile: 0x001A (DVD+RW) Profile: 0x0014 (DVD-RW sequential recording) Profile: 0x0013 (DVD-RW restricted overwrite) Profile: 0x0011 (DVD-R sequential recording) Profile: 0x0010 (DVD-ROM) Profile: 0x000A (CD-RW) Profile: 0x0009 (CD-R) (current) Profile: 0x0008 (CD-ROM) Profile: 0x0000 (Reserved/Unknown) Profile: 0x0000 (Reserved/Unknown) Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96R RAW/R16 RAW/R96R Drive buf size : 1073152 = 1048 KB FIFO size : 12582912 = 12288 KB Speed set to 2822 KB/s Track 01: data 698 MB Total size: 801 MB (79:26.44) = 357483 sectors Lout start: 802 MB (79:28/33) = 357483 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type A, high Beta category (A+) (3) ATIP start of lead in: -11634 (97:26/66) ATIP start of lead out: 359846 (79:59/71) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Blocks total: 359846 Blocks current: 359846 Blocks remaining: 2363 Starting to write CD/DVD at speed 16.0 in real SAO mode for single session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Sending CUE sheet... Errno: 5 (Input/output error), read track info scsi sendcmd: no error CDB: 52 01 00 00 00 FF 00 00 1C 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 28 cmd finished after 0.002s timeout 240s /usr/bin/wodim: Cannot get next writable address for 'invisible' track. /usr/bin/wodim: This means that we are checking recorded media. /usr/bin/wodim: This media cannot be written in streaming mode anymore. /usr/bin/wodim: If you like to write to 'preformatted' RW media, try to blank the media first. Writing pregap for track 1 at -150 Starting new track at sector: 0 Track 01: 0 of 698 MB written. Track 01: 1 of 698 MB written (fifo 100%) [buf 87%] 3.7x. [...] Track 01: 251 of 698 MB written (fifo 99%) [buf 84%] 11.3x. Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error CDB: 2A 00 00 01 F7 DF 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63488 cmd finished after 37.540s timeout 200s /usr/bin/wodim: A write error occured. /usr/bin/wodim: Please properly read the error message above. write track data: error after 264173568 bytes Writing time: 215.654s Average write speed 22.1x. Min drive buffer fill was 63% Fixating... Fixating time: 0.007s GnomeBaker 0.6: CD-R wodim: No write mode specified. wodim: Asuming -tao mode. wodim: Future versions of wodim may have different drive dependent defaults. scsidev: '1,0,0' scsibus: 1 target: 0 lun: 0 Linux sg driver version: 3.5.34 Wodim version: 1.1.2 SCSI buffer size: 64512 Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. TOC Type: 3 = CD-ROM XA mode 2 atapi: 1 Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'QSI ' Identification : 'DVD+-RW SDW-082 ' Revision : 'LX51' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96R RAW/R16 RAW/R96R Drive buf size : 1073152 = 1048 KB FIFO size : 12582912 = 12288 KB Speed set to 2822 KB/s  4 seconds. 3 seconds. 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error CDB: 2A 00 00 01 77 83 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 72 0B 47 00 00 00 00 0E 09 0C 00 00 00 01 00 00 Sense Key: 0x7 Data Protect, Segment 11 Sense Code: 0x00 Qual 0x01 (filemark detected) Fru 0x0 Sense flags: Blk 0 (not valid) end of medium resid: 63488 cmd finished after 0.639s timeout 40s wodim: A write error occured. wodim: Please properly read the error message above. write track data: error after 196876288 bytes Writing time: 149.320s Average write speed 31.9x. Min drive buffer fill was 87% Fixating... Fixating time: 37.929s Brassero Brasero 0.5.2: DVD-R imager (BraseroLocalImage) set_output job (BraseroLocalImage) set_task imager (BraseroLocalImage) get_track job (BraseroLocalImage) set_task Session starting: flags = 16727 media type = 0 speed = 3 track type = 8 track format = 2 output = none job (BraseroGrowisofs) set_rate recorder (BraseroGrowisofs) set_drive recorder (BraseroGrowisofs) set_flags job (BraseroGrowisofs) set_source job (BraseroGrowisofs) set_task recorder (BraseroGrowisofs) record process (BraseroGrowisofs) getting varg growisofs (BraseroGrowisofs) set_action process (BraseroGrowisofs) got varg: growisofs -use-the-force-luke=notray -use-the-force-luke=dao -speed=3 -dvd-compat -use-the-force-luke=tty -Z /dev/scd0=/*/*.iso process (BraseroGrowisofs) launching command process (BraseroGrowisofs) stdout: Executing 'builtin_dd if=/*/*.iso of=/dev/scd0 obs=32k seek=0' process (BraseroGrowisofs) stderr: /dev/scd0: engaging DVD-R DAO upon user request... process (BraseroGrowisofs) stderr: /dev/scd0: reserving 1135069 blocks process (BraseroGrowisofs) stderr: /dev/scd0: "Current Write Speed" is 4.1x1352KBps. process (BraseroGrowisofs) stdout: 0/2324621312 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0% process (BraseroGrowisofs) stdout: 0/2324621312 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0% process (BraseroGrowisofs) stdout: 0/2324621312 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0% process (BraseroGrowisofs) stdout: 0/2324621312 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0% process (BraseroGrowisofs) stdout: 0/2324621312 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0% process (BraseroGrowisofs) stdout: 0/2324621312 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0% process (BraseroGrowisofs) stdout: 0/2324621312 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0% process (BraseroGrowisofs) stdout: 0/2324621312 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0% process (BraseroGrowisofs) stdout: 655360/2324621312 ( 0.0%) @0.1x, remaining 1950:20 RBU 100.0% UBU 4.8% growisofs (BraseroGrowisofs) set_written growisofs (BraseroGrowisofs) set_total growisofs (BraseroGrowisofs) set_rate growisofs (BraseroGrowisofs) set_action growisofs (BraseroGrowisofs) start_progress process (BraseroGrowisofs) stdout: 655360/2324621312 ( 0.0%) @0.0x, remaining 2127:39 RBU 100.0% UBU 100.0% growisofs (BraseroGrowisofs) set_written growisofs (BraseroGrowisofs) set_total growisofs (BraseroGrowisofs) set_rate growisofs (BraseroGrowisofs) set_action growisofs (BraseroGrowisofs) start_progress [...] process (BraseroGrowisofs) stdout: 638844928/2324621312 (27.5%) @0.0x, remaining 12:03 RBU 100.0% UBU 100.0% growisofs (BraseroGrowisofs) set_written growisofs (BraseroGrowisofs) set_total growisofs (BraseroGrowisofs) set_rate growisofs (BraseroGrowisofs) set_action growisofs (BraseroGrowisofs) start_progress process (BraseroGrowisofs) stderr: :-[ WRITE@LBA=4cca0h failed with SK=7h/ASC=00h/ACQ=01h]: Input/output error process (BraseroGrowisofs) stderr: :-( write failed: Input/output error job (BraseroGrowisofs) asked to stop status = 1 error = 1 message = "Unhandled error, aborting" iter (BraseroGrowisofs) stopping process (BraseroGrowisofs) got killed iter (BraseroGrowisofs) stopped job (BraseroGrowisofs) got out of loop job (BraseroGrowisofs) set_task Session error : Unhandled error, aborting [...] Nero 3.0.0.0 beta: DVD-R Linux 2.6.20-15-generic Nero API version: 7.5.14.2 Using interface version: 7.5.0.2 Installed in: /usr/lib/nero/ Application: Nero AG\Nero Linux Internal Version: 7, 5, 14, 2 Recorder: Version: LX51 - HA 1 TA 0 - 0.0.0.0 Adapter driver: HA 1 Drive buffer : 2048kB Bus Type : default (0) -> SCSI, detected: ? Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1248MB (1278524kB) Free physical memory: 104MB (107404kB) Memory in use : 91 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 22.5.2007 NeroAPI 08:23:51 PM #1 Text 0 File Burncd.cpp, Line 3490 Turn on Disc-At-Once, using DVD media 08:23:52 PM #2 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1135068 (252:14.18, 2216MB) 08:23:52 PM #3 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO 08:23:52 PM #4 Text 0 File DlgWaitCD.cpp, Line 2951 Recorder: QSI DVD+-RW SDW-082, Media type: DVD-R Disc Manufacturer: RITEKF - 1 Disc Application Code: 64, Disc Physical Code: 193 08:23:52 PM #5 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 08:23:52 PM #6 Text 0 File ThreadedTransferInterface.cpp, Line 792 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 1135069 (1135069) = #1135069/252:14.19 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1135069 blocks [QSI DVD+-RW SDW-082 (H:1 T:0)] -------------------------------------------------------------- 08:23:52 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [QSI DVD+-RW SDW-082 (H:1 T:0)] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2324621312, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 1135069 | 1135069 | 0x00 1135069 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 08:23:52 PM #8 Text 0 File Burncd.cpp, Line 4263 Caching options: cache CDRom or Network-No, small files-Yes (<32KB) 08:23:52 PM #9 Phase 24 File ExtendedProgress.cpp, Line 537 Caching of files started 08:23:52 PM #10 Text 0 File Burncd.cpp, Line 4382 Cache writing successful. 08:23:52 PM #11 Phase 25 File ExtendedProgress.cpp, Line 537 Caching of files completed 08:23:52 PM #12 Phase 36 File ExtendedProgress.cpp, Line 537 Burn process started at 4x (5540 KB/s) 08:23:52 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2712 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 08:23:52 PM #14 Text 0 File DVDR.cpp, Line 3151 Recording mode: Sequential Recording Mode 08:23:52 PM #15 Text 0 File DVDR.cpp, Line 3307 Start write address at LBA 0 DVD high compatibility mode: Yes 08:23:52 PM #16 Text 0 File Cdrdrv.cpp, Line 9885 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Revision number of maximum recording speed: 6.0 Revision number of minimum recording speed: - Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - - Class: 0 Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 08:23:52 PM #17 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 08:23:53 PM #18 Text 0 File Cdrdrv.cpp, Line 1347 20:23:53 - QSI DVD+-RW SDW-082 (H:1 T:0) : Queue again later 08:32:13 PM #19 SCSI -400 File SCSIInterface.cpp, Line 622 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0xaee0bc40 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x07 (Unknown) Sense Code: 0x00 Sense Qual: 0x01 CDB Data: 0x2A 0x00 0x00 0x0E 0xC8 0x40 0x00 0x00 0x20 0x00 Sense Data: 0x72 0x0B 0x47 0x00 0x00 0x00 0x00 0x0E 0x09 0x0C 0x00 0x00 0x00 0x01 08:32:13 PM #20 CDR -400 File Writer.cpp, Line 299 Unspecified target error QSI DVD+-RW SDW-082 (H:1 T:0) 08:32:13 PM #21 Text 0 File DVDR.cpp, Line 3709 EndDAO: Last written address was 968767 (EC83Fh) 08:32:14 PM #22 Phase 38 File ExtendedProgress.cpp, Line 537 Burn process failed at 4x (5540 KB/s) xcdroast 0.98alpha15: DVD-R Calling: /usr/lib/xcdroast/bin/xcdrwrap CDRECORDDVD dev= "1,0,0" gracetime=10 fs=4096k driveropts=burnfree -v -useinfo speed=4 -dao -eject -pad -data "/*/*.iso" ... scsidev: '1,0,0' scsibus: 1 target: 0 lun: 0 Linux sg driver version: 3.5.34 Wodim version: 1.1.2 SCSI buffer size: 64512 TOC Type: 1 = CD-ROM Beginning DMA speed test. Set CDR_NODMATEST environment variable if device Driveropts: 'burnfree' communication breaks or freezes immediately after that. atapi: 1 Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'QSI ' Identification : 'DVD+-RW SDW-082 ' Revision : 'LX51' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0011 (DVD-R sequential recording) Profile: 0x002B (DVD+R/DL) Profile: 0x001B (DVD+R) Profile: 0x001A (DVD+RW) Profile: 0x0014 (DVD-RW sequential recording) Profile: 0x0013 (DVD-RW restricted overwrite) Profile: 0x0011 (DVD-R sequential recording) (current) Profile: 0x0010 (DVD-ROM) Profile: 0x000A (CD-RW) Profile: 0x0009 (CD-R) Profile: 0x0008 (CD-ROM) Profile: 0x0000 (Reserved/Unknown) Profile: 0x0000 (Reserved/Unknown) Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd). Driver flags : SWABAUDIO BURNFREE Supported modes: PACKET SAO Drive buf size : 688128 = 672 KB Speed set to 5540 KB/s FIFO size : 4194304 = 4096 KB Track 01: data 2216 MB padsize: 30 KB Total size: 2546 MB (252:14.45) = 1135084 sectors Lout start: 2546 MB (252:16/34) = 1135084 sectors Current Secsize: 2048 ATIP start of lead in: -150 (00:00/00) Disk type: unknown dye (reserved id code) Manuf. index: -1 Manufacturer: unknown (not in table) Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 1163412 Starting to write CD/DVD at speed 4.0 in real SAO mode for single session. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Sending CUE sheet... Starting new track at sector: 0 Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error CDB: 2A 00 00 06 1B 52 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 72 0B 47 00 00 00 00 0E 09 0C 00 00 00 01 00 00 Sense Key: 0x7 Data Protect, Segment 11 Sense Code: 0x00 Qual 0x01 (filemark detected) Fru 0x0 Sense flags: Blk 0 (not valid) end of medium resid: 63488 cmd finished after 0.638s timeout 200s wodim: A write error occured. wodim: Please properly read the error message above. write track data: error after 819630080 bytes Writing time: 286.124s Average write speed 5.9x. Min drive buffer fill was 47% Fixating... Fixating time: 2.485s