[146236.055180] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [146236.055183] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [146236.955545] wlan0: authenticate with c4:0a:cb:2d:81:b4 [146236.980394] wlan0: send auth to c4:0a:cb:2d:81:b4 (try 1/3) [146236.983463] wlan0: authenticated [146236.987067] wlan0: associate with c4:0a:cb:2d:81:b4 (try 1/3) [146236.991706] wlan0: RX AssocResp from c4:0a:cb:2d:81:b4 (capab=0x431 status=0 aid=1) [146236.991765] wlan0: associated [146236.991832] cfg80211: Calling CRDA for country: IN [146236.995664] ath: EEPROM regdomain: 0x8164 [146236.995669] ath: EEPROM indicates we should expect a country code [146236.995671] ath: doing EEPROM country->regdmn map search [146236.995673] ath: country maps to regdmn code: 0x5b [146236.995676] ath: Country alpha2 being used: IN [146236.995678] ath: Regpair used: 0x5b [146236.995681] ath: regdomain 0x8164 dynamically updated by country IE [146236.995707] cfg80211: Regulatory domain changed to country: IN [146236.995709] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [146236.995712] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [146236.995714] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [146236.995716] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [146236.995719] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [146704.921238] wlan0: authenticate with c4:0a:cb:2d:7b:f4 [146704.939034] wlan0: direct probe to c4:0a:cb:2d:7b:f4 (try 1/3) [146704.939279] cfg80211: Calling CRDA to update world regulatory domain [146704.942884] cfg80211: World regulatory domain updated: [146704.942887] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [146704.942888] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [146704.942890] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [146704.942891] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [146704.942892] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [146704.942893] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [146705.141775] wlan0: direct probe to c4:0a:cb:2d:7b:f4 (try 2/3) [146705.346035] wlan0: direct probe to c4:0a:cb:2d:7b:f4 (try 3/3) [146705.550240] wlan0: authentication with c4:0a:cb:2d:7b:f4 timed out [146705.791624] wlan0: authenticate with c4:0a:cb:2d:81:b4 [146705.816524] wlan0: send auth to c4:0a:cb:2d:81:b4 (try 1/3) [146705.819676] wlan0: authenticated [146705.822572] wlan0: associate with c4:0a:cb:2d:81:b4 (try 1/3) [146705.827122] wlan0: RX AssocResp from c4:0a:cb:2d:81:b4 (capab=0x431 status=0 aid=1) [146705.827181] wlan0: associated [146705.827515] cfg80211: Calling CRDA for country: IN [146705.830280] ath: EEPROM regdomain: 0x8164 [146705.830284] ath: EEPROM indicates we should expect a country code [146705.830286] ath: doing EEPROM country->regdmn map search [146705.830287] ath: country maps to regdmn code: 0x5b [146705.830289] ath: Country alpha2 being used: IN [146705.830290] ath: Regpair used: 0x5b [146705.830292] ath: regdomain 0x8164 dynamically updated by country IE [146705.830315] cfg80211: Regulatory domain changed to country: IN [146705.830317] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [146705.830319] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [146705.830320] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [146705.830322] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [146705.830323] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [148519.283560] wlan0: deauthenticated from c4:0a:cb:2d:81:b4 (Reason: 2) [148519.325271] cfg80211: Calling CRDA to update world regulatory domain [148519.332710] cfg80211: World regulatory domain updated: [148519.332715] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [148519.332719] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [148519.332722] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [148519.332725] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [148519.332727] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [148519.332730] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [148519.479169] wlan0: authenticate with c4:0a:cb:2d:81:b4 [148519.503780] wlan0: send auth to c4:0a:cb:2d:81:b4 (try 1/3) [148519.506757] wlan0: authenticated [148519.510037] wlan0: associate with c4:0a:cb:2d:81:b4 (try 1/3) [148519.514640] wlan0: RX AssocResp from c4:0a:cb:2d:81:b4 (capab=0x431 status=0 aid=1) [148519.514721] wlan0: associated [148519.514778] cfg80211: Calling CRDA for country: IN [148519.517734] ath: EEPROM regdomain: 0x8164 [148519.517740] ath: EEPROM indicates we should expect a country code [148519.517742] ath: doing EEPROM country->regdmn map search [148519.517744] ath: country maps to regdmn code: 0x5b [148519.517746] ath: Country alpha2 being used: IN [148519.517748] ath: Regpair used: 0x5b [148519.517751] ath: regdomain 0x8164 dynamically updated by country IE [148519.517776] cfg80211: Regulatory domain changed to country: IN [148519.517778] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [148519.517781] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [148519.517783] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [148519.517785] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [148519.517787] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [148776.692145] ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root [149220.252398] systemd-hostnamed[3716]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [149347.941966] wlan0: authenticate with c4:0a:cb:2d:7b:f4 [149347.959629] wlan0: direct probe to c4:0a:cb:2d:7b:f4 (try 1/3) [149347.959758] cfg80211: Calling CRDA to update world regulatory domain [149347.963630] cfg80211: World regulatory domain updated: [149347.963634] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [149347.963638] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [149347.963641] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [149347.963643] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [149347.963646] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [149347.963648] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [149348.160512] wlan0: direct probe to c4:0a:cb:2d:7b:f4 (try 2/3) [149348.364758] wlan0: direct probe to c4:0a:cb:2d:7b:f4 (try 3/3) [149348.568993] wlan0: authentication with c4:0a:cb:2d:7b:f4 timed out [149348.806781] wlan0: authenticate with c4:0a:cb:2d:81:b4 [149348.830421] wlan0: send auth to c4:0a:cb:2d:81:b4 (try 1/3) [149348.833346] wlan0: authenticated [149348.837271] wlan0: associate with c4:0a:cb:2d:81:b4 (try 1/3) [149348.841921] wlan0: RX AssocResp from c4:0a:cb:2d:81:b4 (capab=0x431 status=0 aid=1) [149348.841995] wlan0: associated [149348.842131] cfg80211: Calling CRDA for country: IN [149348.845818] ath: EEPROM regdomain: 0x8164 [149348.845823] ath: EEPROM indicates we should expect a country code [149348.845825] ath: doing EEPROM country->regdmn map search [149348.845827] ath: country maps to regdmn code: 0x5b [149348.845830] ath: Country alpha2 being used: IN [149348.845832] ath: Regpair used: 0x5b [149348.845834] ath: regdomain 0x8164 dynamically updated by country IE [149348.845860] cfg80211: Regulatory domain changed to country: IN [149348.845862] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [149348.845865] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [149348.845867] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [149348.845870] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [149348.845872] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [151160.861153] wlan0: deauthenticated from c4:0a:cb:2d:81:b4 (Reason: 2) [151160.909997] cfg80211: Calling CRDA to update world regulatory domain [151160.917079] cfg80211: World regulatory domain updated: [151160.917084] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [151160.917087] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [151160.917090] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [151160.917093] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [151160.917095] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [151160.917098] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [151161.056591] wlan0: authenticate with c4:0a:cb:2d:81:b4 [151161.080245] wlan0: send auth to c4:0a:cb:2d:81:b4 (try 1/3) [151161.083157] wlan0: authenticated [151161.087131] wlan0: associate with c4:0a:cb:2d:81:b4 (try 1/3) [151161.091830] wlan0: RX AssocResp from c4:0a:cb:2d:81:b4 (capab=0x431 status=0 aid=1) [151161.091902] wlan0: associated [151161.092055] cfg80211: Calling CRDA for country: IN [151161.096020] ath: EEPROM regdomain: 0x8164 [151161.096025] ath: EEPROM indicates we should expect a country code [151161.096027] ath: doing EEPROM country->regdmn map search [151161.096030] ath: country maps to regdmn code: 0x5b [151161.096032] ath: Country alpha2 being used: IN [151161.096034] ath: Regpair used: 0x5b [151161.096036] ath: regdomain 0x8164 dynamically updated by country IE [151161.096060] cfg80211: Regulatory domain changed to country: IN [151161.096062] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [151161.096065] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [151161.096068] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [151161.096070] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [151161.096072] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [152015.060883] systemd-hostnamed[4147]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [152591.646122] wlan0: authenticate with c4:0a:cb:2d:7b:f4 [152591.663890] wlan0: direct probe to c4:0a:cb:2d:7b:f4 (try 1/3) [152591.665161] cfg80211: Calling CRDA to update world regulatory domain [152591.671148] cfg80211: World regulatory domain updated: [152591.671152] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [152591.671153] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [152591.671154] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [152591.671155] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [152591.671156] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [152591.671157] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [152591.865269] wlan0: direct probe to c4:0a:cb:2d:7b:f4 (try 2/3) [152592.069524] wlan0: send auth to c4:0a:cb:2d:7b:f4 (try 3/3) [152592.094308] wlan0: authenticated [152592.097525] wlan0: associate with c4:0a:cb:2d:7b:f4 (try 1/3) [152592.101787] wlan0: RX AssocResp from c4:0a:cb:2d:7b:f4 (capab=0x431 status=0 aid=3) [152592.101852] wlan0: associated [152592.101935] cfg80211: Calling CRDA for country: IN [152592.105624] ath: EEPROM regdomain: 0x8164 [152592.105629] ath: EEPROM indicates we should expect a country code [152592.105631] ath: doing EEPROM country->regdmn map search [152592.105633] ath: country maps to regdmn code: 0x5b [152592.105636] ath: Country alpha2 being used: IN [152592.105637] ath: Regpair used: 0x5b [152592.105640] ath: regdomain 0x8164 dynamically updated by country IE [152592.105664] cfg80211: Regulatory domain changed to country: IN [152592.105666] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [152592.105668] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [152592.105671] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [152592.105673] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [152592.105675] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [152948.563730] cfg80211: Calling CRDA to update world regulatory domain [152948.570775] cfg80211: World regulatory domain updated: [152948.570780] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [152948.570783] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [152948.570786] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [152948.570789] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [152948.570791] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [152948.570793] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [152954.685405] wlan0: authenticate with c4:0a:cb:2d:81:b4 [152954.711520] wlan0: send auth to c4:0a:cb:2d:81:b4 (try 1/3) [152954.713415] wlan0: authenticated [152954.715724] wlan0: associate with c4:0a:cb:2d:81:b4 (try 1/3) [152954.721018] wlan0: RX AssocResp from c4:0a:cb:2d:81:b4 (capab=0x431 status=0 aid=2) [152954.721095] wlan0: associated [152954.721247] cfg80211: Calling CRDA for country: IN [152954.725268] ath: EEPROM regdomain: 0x8164 [152954.725272] ath: EEPROM indicates we should expect a country code [152954.725275] ath: doing EEPROM country->regdmn map search [152954.725277] ath: country maps to regdmn code: 0x5b [152954.725279] ath: Country alpha2 being used: IN [152954.725281] ath: Regpair used: 0x5b [152954.725284] ath: regdomain 0x8164 dynamically updated by country IE [152954.725309] cfg80211: Regulatory domain changed to country: IN [152954.725311] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [152954.725314] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [152954.725316] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [152954.725319] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [152954.725321] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [154768.887692] wlan0: deauthenticated from c4:0a:cb:2d:81:b4 (Reason: 2) [154768.926815] cfg80211: Calling CRDA to update world regulatory domain [154768.933704] cfg80211: World regulatory domain updated: [154768.933709] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [154768.933712] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [154768.933715] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [154768.933718] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [154768.933720] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [154768.933722] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [154769.133020] wlan0: authenticate with c4:0a:cb:2d:7b:f4 [154769.157071] wlan0: send auth to c4:0a:cb:2d:7b:f4 (try 1/3) [154769.159000] wlan0: authenticated [154769.160029] wlan0: associate with c4:0a:cb:2d:7b:f4 (try 1/3) [154769.163728] wlan0: RX AssocResp from c4:0a:cb:2d:7b:f4 (capab=0x431 status=0 aid=4) [154769.163794] wlan0: associated [154769.164106] cfg80211: Calling CRDA for country: IN [154769.167475] ath: EEPROM regdomain: 0x8164 [154769.167480] ath: EEPROM indicates we should expect a country code [154769.167483] ath: doing EEPROM country->regdmn map search [154769.167485] ath: country maps to regdmn code: 0x5b [154769.167488] ath: Country alpha2 being used: IN [154769.167490] ath: Regpair used: 0x5b [154769.167493] ath: regdomain 0x8164 dynamically updated by country IE [154769.167516] cfg80211: Regulatory domain changed to country: IN [154769.167519] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [154769.167522] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [154769.167525] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [154769.167527] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [154769.167530] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [154859.118198] systemd-hostnamed[4549]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [156581.779047] wlan0: deauthenticated from c4:0a:cb:2d:7b:f4 (Reason: 2) [156581.824853] cfg80211: Calling CRDA to update world regulatory domain [156581.832300] cfg80211: World regulatory domain updated: [156581.832305] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [156581.832309] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [156581.832312] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [156581.832314] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [156581.832317] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [156581.832319] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [156582.868349] wlan0: authenticate with c4:0a:cb:2d:d0:84 [156582.892943] wlan0: direct probe to c4:0a:cb:2d:d0:84 (try 1/3) [156583.095827] wlan0: direct probe to c4:0a:cb:2d:d0:84 (try 2/3) [156583.300039] wlan0: direct probe to c4:0a:cb:2d:d0:84 (try 3/3) [156583.504293] wlan0: authentication with c4:0a:cb:2d:d0:84 timed out [156584.570517] wlan0: authenticate with c4:0a:cb:2d:81:b4 [156584.594691] wlan0: send auth to c4:0a:cb:2d:81:b4 (try 1/3) [156584.598410] wlan0: authenticated [156584.601553] wlan0: associate with c4:0a:cb:2d:81:b4 (try 1/3) [156584.605196] wlan0: RX AssocResp from c4:0a:cb:2d:81:b4 (capab=0x431 status=0 aid=11) [156584.605256] wlan0: associated [156584.605336] cfg80211: Calling CRDA for country: IN [156584.608738] ath: EEPROM regdomain: 0x8164 [156584.608743] ath: EEPROM indicates we should expect a country code [156584.608746] ath: doing EEPROM country->regdmn map search [156584.608748] ath: country maps to regdmn code: 0x5b [156584.608751] ath: Country alpha2 being used: IN [156584.608752] ath: Regpair used: 0x5b [156584.608755] ath: regdomain 0x8164 dynamically updated by country IE [156584.608780] cfg80211: Regulatory domain changed to country: IN [156584.608782] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [156584.608785] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [156584.608787] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [156584.608789] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [156584.608792] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [156660.104245] ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root [157111.352710] ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root [158397.711218] wlan0: deauthenticated from c4:0a:cb:2d:81:b4 (Reason: 2) [158397.739371] cfg80211: Calling CRDA to update world regulatory domain [158397.746410] cfg80211: World regulatory domain updated: [158397.746416] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [158397.746422] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [158397.746425] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [158397.746429] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [158397.746433] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [158397.746437] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [158397.945815] wlan0: authenticate with c4:0a:cb:2d:d0:84 [158397.972637] wlan0: direct probe to c4:0a:cb:2d:d0:84 (try 1/3) [158398.176875] wlan0: direct probe to c4:0a:cb:2d:d0:84 (try 2/3) [158398.381144] wlan0: direct probe to c4:0a:cb:2d:d0:84 (try 3/3) [158398.585377] wlan0: authentication with c4:0a:cb:2d:d0:84 timed out [158398.766300] wlan0: authenticate with c4:0a:cb:2d:7b:f4 [158398.790726] wlan0: send auth to c4:0a:cb:2d:7b:f4 (try 1/3) [158398.792628] wlan0: authenticated [158398.793594] wlan0: associate with c4:0a:cb:2d:7b:f4 (try 1/3) [158398.797232] wlan0: RX AssocResp from c4:0a:cb:2d:7b:f4 (capab=0x431 status=0 aid=11) [158398.797286] wlan0: associated [158398.797357] cfg80211: Calling CRDA for country: IN [158398.800337] ath: EEPROM regdomain: 0x8164 [158398.800342] ath: EEPROM indicates we should expect a country code [158398.800345] ath: doing EEPROM country->regdmn map search [158398.800347] ath: country maps to regdmn code: 0x5b [158398.800350] ath: Country alpha2 being used: IN [158398.800352] ath: Regpair used: 0x5b [158398.800354] ath: regdomain 0x8164 dynamically updated by country IE [158398.800378] cfg80211: Regulatory domain changed to country: IN [158398.800380] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [158398.800383] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [158398.800386] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [158398.800388] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [158398.800390] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [159194.491994] systemd-hostnamed[5370]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [159249.120675] ath: phy0: Failed to stop TX DMA, queues=0x005! [159249.133878] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [159249.133912] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [159279.141173] ath: phy0: Failed to stop TX DMA, queues=0x005! [159279.154533] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [159279.154580] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [159290.173837] ath: phy0: Failed to stop TX DMA, queues=0x005! [159290.187646] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [159290.187693] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [159351.214396] ath: phy0: Failed to stop TX DMA, queues=0x005! [159351.227720] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [159351.227762] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [159395.271941] ath: phy0: Failed to stop TX DMA, queues=0x005! [159395.285669] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [159395.285713] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [159422.323424] ath: phy0: Failed to stop TX DMA, queues=0x005! [159422.336721] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [159422.336760] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [159431.336754] ath: phy0: Failed to stop TX DMA, queues=0x005! [159431.350081] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [159431.350119] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [159481.391406] ath: phy0: Failed to stop TX DMA, queues=0x005! [159481.404732] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [159481.404773] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [159567.486681] ath: phy0: Failed to stop TX DMA, queues=0x005! [159567.499980] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [159567.500020] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [159648.588090] ath: phy0: Failed to stop TX DMA, queues=0x005! [159648.601425] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [159648.601467] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [159731.661221] ath: phy0: Failed to stop TX DMA, queues=0x005! [159731.674611] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [159731.674649] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [159735.662168] ath: phy0: Failed to stop TX DMA, queues=0x005! [159735.675495] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [159735.675536] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [159757.964682] ath: phy0: Failed to stop TX DMA, queues=0x004! [159757.977979] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [159757.978020] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [159834.777909] ath: phy0: Failed to stop TX DMA, queues=0x005! [159834.791245] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [159834.791283] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [159848.818537] ath: phy0: Failed to stop TX DMA, queues=0x005! [159848.831931] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [159848.831973] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [159874.950323] ath: phy0: Failed to stop TX DMA, queues=0x004! [159874.963658] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [159874.963697] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [159882.857621] ath: phy0: Failed to stop TX DMA, queues=0x005! [159882.870955] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [159882.871000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [159935.895160] ath: phy0: Failed to stop TX DMA, queues=0x005! [159935.908588] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [159935.908629] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [160026.016428] ath: phy0: Failed to stop TX DMA, queues=0x005! [160026.029608] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [160026.029638] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [160031.088621] ath: phy0: Failed to stop TX DMA, queues=0x004! [160031.101912] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [160031.101954] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [160080.058272] ath: phy0: Failed to stop TX DMA, queues=0x005! [160080.071585] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [160080.071625] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [160147.160053] ath: phy0: Failed to stop TX DMA, queues=0x005! [160147.173375] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [160147.173413] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [160174.166989] ath: phy0: Failed to stop TX DMA, queues=0x005! [160174.180302] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [160174.180340] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [160211.336515] wlan0: deauthenticated from c4:0a:cb:2d:7b:f4 (Reason: 2) [160211.377784] cfg80211: Calling CRDA to update world regulatory domain [160211.529326] cfg80211: World regulatory domain updated: [160211.529331] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [160211.529333] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [160211.529334] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [160211.529335] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [160211.529336] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [160211.529337] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [160212.422090] wlan0: authenticate with c4:0a:cb:2d:81:b4 [160212.448899] wlan0: direct probe to c4:0a:cb:2d:81:b4 (try 1/3) [160212.649343] wlan0: direct probe to c4:0a:cb:2d:81:b4 (try 2/3) [160212.853575] wlan0: send auth to c4:0a:cb:2d:81:b4 (try 3/3) [160212.855579] wlan0: authenticated [160212.857583] wlan0: associate with c4:0a:cb:2d:81:b4 (try 1/3) [160212.861226] wlan0: RX AssocResp from c4:0a:cb:2d:81:b4 (capab=0x431 status=0 aid=9) [160212.861333] wlan0: associated [160212.862255] cfg80211: Calling CRDA for country: IN [160212.865778] ath: EEPROM regdomain: 0x8164 [160212.865782] ath: EEPROM indicates we should expect a country code [160212.865785] ath: doing EEPROM country->regdmn map search [160212.865787] ath: country maps to regdmn code: 0x5b [160212.865789] ath: Country alpha2 being used: IN [160212.865791] ath: Regpair used: 0x5b [160212.865794] ath: regdomain 0x8164 dynamically updated by country IE [160212.865818] cfg80211: Regulatory domain changed to country: IN [160212.865820] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [160212.865823] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [160212.865826] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [160212.865828] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [160212.865830] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [160218.211411] ath: phy0: Failed to stop TX DMA, queues=0x005! [160218.224809] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [160218.224850] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [160237.235044] ath: phy0: Failed to stop TX DMA, queues=0x005! [160237.248386] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [160237.248431] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [160337.350980] ath: phy0: Failed to stop TX DMA, queues=0x005! [160337.364301] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [160337.364339] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [160366.410001] ath: phy0: Failed to stop TX DMA, queues=0x005! [160366.423322] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [160366.423365] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [160392.809288] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000ad00 [160392.809330] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [160392.830127] cfg80211: Calling CRDA to update world regulatory domain [160392.890859] cfg80211: World regulatory domain updated: [160392.890862] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [160392.890863] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [160392.890865] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [160392.890866] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [160392.890867] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [160392.890868] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [160393.040638] wlan0: authenticate with c4:0a:cb:2d:7b:f4 [160393.064365] wlan0: direct probe to c4:0a:cb:2d:7b:f4 (try 1/3) [160393.267636] wlan0: direct probe to c4:0a:cb:2d:7b:f4 (try 2/3) [160393.471868] wlan0: direct probe to c4:0a:cb:2d:7b:f4 (try 3/3) [160393.676101] wlan0: authentication with c4:0a:cb:2d:7b:f4 timed out [160393.857226] wlan0: authenticate with c4:0a:cb:2d:d0:84 [160393.881112] wlan0: direct probe to c4:0a:cb:2d:d0:84 (try 1/3) [160394.084523] wlan0: direct probe to c4:0a:cb:2d:d0:84 (try 2/3) [160394.288801] wlan0: direct probe to c4:0a:cb:2d:d0:84 (try 3/3) [160394.493035] wlan0: authentication with c4:0a:cb:2d:d0:84 timed out [160395.563929] wlan0: authenticate with c4:0a:cb:2d:81:b4 [160395.587314] wlan0: send auth to c4:0a:cb:2d:81:b4 (try 1/3) [160395.594564] wlan0: authenticated [160395.598265] wlan0: associate with c4:0a:cb:2d:81:b4 (try 1/3) [160395.620246] wlan0: RX AssocResp from c4:0a:cb:2d:81:b4 (capab=0x431 status=0 aid=9) [160395.620301] wlan0: associated [160395.620588] cfg80211: Calling CRDA for country: IN [160395.623136] ath: EEPROM regdomain: 0x8164 [160395.623139] ath: EEPROM indicates we should expect a country code [160395.623141] ath: doing EEPROM country->regdmn map search [160395.623142] ath: country maps to regdmn code: 0x5b [160395.623144] ath: Country alpha2 being used: IN [160395.623145] ath: Regpair used: 0x5b [160395.623147] ath: regdomain 0x8164 dynamically updated by country IE [160395.623166] cfg80211: Regulatory domain changed to country: IN [160395.623168] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [160395.623169] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [160395.623171] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [160395.623172] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [160395.623174] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [160405.456163] ath: phy0: Failed to stop TX DMA, queues=0x005! [160405.469491] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [160405.469529] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [160414.436974] ath: phy0: Failed to stop TX DMA, queues=0x005! [160414.450289] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [160414.450331] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [160417.558009] ath: phy0: Failed to stop TX DMA, queues=0x004! [160417.571318] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a800 [160417.571357] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [160419.453645] ath: phy0: Failed to stop TX DMA, queues=0x005! [160419.466972] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [160419.467012] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [160423.473452] ath: phy0: Failed to stop TX DMA, queues=0x005! [160423.486758] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a800 [160423.486793] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [160454.545986] ath: phy0: Failed to stop TX DMA, queues=0x004! [160454.559277] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [160454.559314] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [160456.496703] ath: phy0: Failed to stop TX DMA, queues=0x005! [160456.510025] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [160456.510065] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [160480.599718] ath: phy0: Failed to stop TX DMA, queues=0x004! [160480.613006] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [160480.613044] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [160525.591769] ath: phy0: Failed to stop TX DMA, queues=0x005! [160525.605091] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [160525.605130] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [160537.761037] ath: phy0: Failed to stop TX DMA, queues=0x004! [160537.774215] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [160537.774247] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [160546.618549] ath: phy0: Failed to stop TX DMA, queues=0x005! [160546.631860] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [160546.631899] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [160591.668371] ath: phy0: Failed to stop TX DMA, queues=0x005! [160591.681686] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [160591.681724] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [160714.779954] ath: phy0: Failed to stop TX DMA, queues=0x005! [160714.793136] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [160714.793171] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [160725.814193] ath: phy0: Failed to stop TX DMA, queues=0x005! [160725.827520] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [160725.827558] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [160769.875496] ath: phy0: Failed to stop TX DMA, queues=0x005! [160769.890072] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [160769.890115] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [160805.084647] ath: phy0: Failed to stop TX DMA, queues=0x004! [160805.097937] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [160805.097974] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [160876.966602] ath: phy0: Failed to stop TX DMA, queues=0x005! [160876.979911] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [160876.979950] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [160925.152647] ath: phy0: Failed to stop TX DMA, queues=0x005! [160925.165910] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [160925.165951] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [160925.186059] cfg80211: Calling CRDA to update world regulatory domain [160925.395952] wlan0: authenticate with c4:0a:cb:2d:7b:f4 [160925.423239] wlan0: direct probe to c4:0a:cb:2d:7b:f4 (try 1/3) [160925.623613] wlan0: direct probe to c4:0a:cb:2d:7b:f4 (try 2/3) [160925.827848] wlan0: direct probe to c4:0a:cb:2d:7b:f4 (try 3/3) [160926.032068] wlan0: authentication with c4:0a:cb:2d:7b:f4 timed out [160926.212851] wlan0: authenticate with c4:0a:cb:2d:d0:84 [160926.237194] wlan0: direct probe to c4:0a:cb:2d:d0:84 (try 1/3) [160926.440508] wlan0: direct probe to c4:0a:cb:2d:d0:84 (try 2/3) [160926.644787] wlan0: direct probe to c4:0a:cb:2d:d0:84 (try 3/3) [160926.848976] wlan0: authentication with c4:0a:cb:2d:d0:84 timed out [160927.922955] wlan0: authenticate with c4:0a:cb:2d:81:b4 [160927.947224] wlan0: send auth to c4:0a:cb:2d:81:b4 (try 1/3) [160927.953257] wlan0: authenticated [160927.954239] wlan0: associate with c4:0a:cb:2d:81:b4 (try 1/3) [160927.965985] wlan0: RX AssocResp from c4:0a:cb:2d:81:b4 (capab=0x431 status=0 aid=9) [160927.966042] wlan0: associated [160933.095759] cfg80211: World regulatory domain updated: [160933.095761] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [160933.095763] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [160933.095764] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [160933.095765] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [160933.095766] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [160933.095767] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [160933.095927] cfg80211: Calling CRDA for country: IN [160933.098422] ath: EEPROM regdomain: 0x8164 [160933.098424] ath: EEPROM indicates we should expect a country code [160933.098426] ath: doing EEPROM country->regdmn map search [160933.098426] ath: country maps to regdmn code: 0x5b [160933.098428] ath: Country alpha2 being used: IN [160933.098428] ath: Regpair used: 0x5b [160933.098430] ath: regdomain 0x8164 dynamically updated by country IE [160933.098449] cfg80211: Regulatory domain changed to country: IN [160933.098450] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [160933.098451] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [160933.098452] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [160933.098453] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [160933.098454] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [160956.990156] ath: phy0: Failed to stop TX DMA, queues=0x004! [160957.003413] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [160957.003452] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [160994.060513] ath: phy0: Failed to stop TX DMA, queues=0x004! [160994.073817] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [160994.073857] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [161000.748944] ath: phy0: Failed to stop TX DMA, queues=0x005! [161000.762261] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [161000.762303] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [161029.170075] ath: phy0: Failed to stop TX DMA, queues=0x005! [161029.183493] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [161029.183531] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [161036.188483] ath: phy0: Failed to stop TX DMA, queues=0x005! [161036.201807] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [161036.201845] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [161038.262960] ath: phy0: Failed to stop TX DMA, queues=0x004! [161038.276246] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [161038.276286] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [161071.211144] ath: phy0: Failed to stop TX DMA, queues=0x005! [161071.224456] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [161071.224499] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [161083.227837] ath: phy0: Failed to stop TX DMA, queues=0x005! [161083.241138] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [161083.241179] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [161115.239274] ath: phy0: Failed to stop TX DMA, queues=0x005! [161115.252595] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0002a800 [161115.252638] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [161140.271973] ath: phy0: Failed to stop TX DMA, queues=0x005! [161140.285270] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [161140.285311] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [161181.307306] ath: phy0: Failed to stop TX DMA, queues=0x005! [161181.320480] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [161181.320512] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [161218.351277] ath: phy0: Failed to stop TX DMA, queues=0x005! [161218.364641] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [161218.364684] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [161257.403009] ath: phy0: Failed to stop TX DMA, queues=0x005! [161257.416323] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [161257.416363] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [161284.476203] ath: phy0: Failed to stop TX DMA, queues=0x004! [161284.489528] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [161284.489570] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [161316.467201] ath: phy0: Failed to stop TX DMA, queues=0x005! [161316.480560] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [161316.480602] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [161321.894079] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0002a600 [161321.894122] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [161321.915262] cfg80211: Calling CRDA to update world regulatory domain [161322.032832] cfg80211: World regulatory domain updated: [161322.032835] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [161322.032837] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [161322.032838] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [161322.032839] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [161322.032840] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [161322.032841] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [161322.069275] wlan0: authenticate with c4:0a:cb:2d:7b:f4 [161322.093552] wlan0: direct probe to c4:0a:cb:2d:7b:f4 (try 1/3) [161322.296724] wlan0: direct probe to c4:0a:cb:2d:7b:f4 (try 2/3) [161322.500956] wlan0: direct probe to c4:0a:cb:2d:7b:f4 (try 3/3) [161322.705163] wlan0: authentication with c4:0a:cb:2d:7b:f4 timed out [161323.780174] wlan0: authenticate with c4:0a:cb:2d:81:b4 [161323.806139] wlan0: direct probe to c4:0a:cb:2d:81:b4 (try 1/3) [161324.006646] wlan0: direct probe to c4:0a:cb:2d:81:b4 (try 2/3) [161324.210895] wlan0: send auth to c4:0a:cb:2d:81:b4 (try 3/3) [161324.213961] wlan0: authenticated [161324.214865] wlan0: associate with c4:0a:cb:2d:81:b4 (try 1/3) [161324.219575] wlan0: RX AssocResp from c4:0a:cb:2d:81:b4 (capab=0x431 status=0 aid=9) [161324.219659] wlan0: associated [161324.219828] cfg80211: Calling CRDA for country: IN [161324.223952] ath: EEPROM regdomain: 0x8164 [161324.223957] ath: EEPROM indicates we should expect a country code [161324.223960] ath: doing EEPROM country->regdmn map search [161324.223962] ath: country maps to regdmn code: 0x5b [161324.223964] ath: Country alpha2 being used: IN [161324.223966] ath: Regpair used: 0x5b [161324.223969] ath: regdomain 0x8164 dynamically updated by country IE [161324.223993] cfg80211: Regulatory domain changed to country: IN [161324.223995] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [161324.223998] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [161324.224001] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [161324.224003] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [161324.224005] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [161403.563822] ath: phy0: Failed to stop TX DMA, queues=0x005! [161403.577163] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [161403.577208] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [161536.712996] ath: phy0: Failed to stop TX DMA, queues=0x005! [161536.726305] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [161536.726348] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [161706.490155] ath: phy0: Failed to stop TX DMA, queues=0x004! [161706.503443] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [161706.503481] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [161710.249644] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0002ad00 [161710.249688] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [161710.262798] cfg80211: Calling CRDA to update world regulatory domain [161710.270537] cfg80211: World regulatory domain updated: [161710.270542] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [161710.270546] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [161710.270549] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [161710.270552] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [161710.270554] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [161710.270556] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [161710.480838] wlan0: authenticate with c4:0a:cb:2d:d0:84 [161710.505111] wlan0: direct probe to c4:0a:cb:2d:d0:84 (try 1/3) [161710.708276] wlan0: direct probe to c4:0a:cb:2d:d0:84 (try 2/3) [161710.912535] wlan0: direct probe to c4:0a:cb:2d:d0:84 (try 3/3) [161711.116718] wlan0: authentication with c4:0a:cb:2d:d0:84 timed out [161711.298084] wlan0: authenticate with c4:0a:cb:2d:7b:f4 [161711.325126] wlan0: send auth to c4:0a:cb:2d:7b:f4 (try 1/3) [161711.327035] wlan0: authenticated [161711.328983] wlan0: associate with c4:0a:cb:2d:7b:f4 (try 1/3) [161711.332896] wlan0: RX AssocResp from c4:0a:cb:2d:7b:f4 (capab=0x431 status=0 aid=1) [161711.332976] wlan0: associated [161711.333182] cfg80211: Calling CRDA for country: IN [161711.336677] ath: EEPROM regdomain: 0x8164 [161711.336682] ath: EEPROM indicates we should expect a country code [161711.336684] ath: doing EEPROM country->regdmn map search [161711.336687] ath: country maps to regdmn code: 0x5b [161711.336689] ath: Country alpha2 being used: IN [161711.336691] ath: Regpair used: 0x5b [161711.336693] ath: regdomain 0x8164 dynamically updated by country IE [161711.336718] cfg80211: Regulatory domain changed to country: IN [161711.336720] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [161711.336723] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [161711.336725] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [161711.336727] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [161711.336729] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [161833.052823] ath: phy0: Failed to stop TX DMA, queues=0x005! [161833.066176] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [161833.066217] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [161920.151602] ath: phy0: Failed to stop TX DMA, queues=0x005! [161920.164921] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [161920.164962] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [161938.201421] ath: phy0: Failed to stop TX DMA, queues=0x005! [161938.214818] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [161938.214852] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [161986.254063] ath: phy0: Failed to stop TX DMA, queues=0x005! [161986.267423] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [161986.267468] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [161988.424185] ath: phy0: Failed to stop TX DMA, queues=0x004! [161988.437487] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [161988.437529] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [163313.916890] ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root [163524.619315] wlan0: deauthenticated from c4:0a:cb:2d:7b:f4 (Reason: 2) [163524.642524] cfg80211: Calling CRDA to update world regulatory domain [163524.650328] cfg80211: World regulatory domain updated: [163524.650334] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [163524.650337] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [163524.650340] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [163524.650342] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [163524.650345] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [163524.650347] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [163525.686275] wlan0: authenticate with c4:0a:cb:2d:7b:f4 [163525.710403] wlan0: send auth to c4:0a:cb:2d:7b:f4 (try 1/3) [163525.713783] wlan0: authenticated [163525.717277] wlan0: associate with c4:0a:cb:2d:7b:f4 (try 1/3) [163525.722084] wlan0: RX AssocResp from c4:0a:cb:2d:7b:f4 (capab=0x431 status=0 aid=1) [163525.722149] wlan0: associated [163525.722342] cfg80211: Calling CRDA for country: IN [163525.726007] ath: EEPROM regdomain: 0x8164 [163525.726012] ath: EEPROM indicates we should expect a country code [163525.726014] ath: doing EEPROM country->regdmn map search [163525.726016] ath: country maps to regdmn code: 0x5b [163525.726019] ath: Country alpha2 being used: IN [163525.726021] ath: Regpair used: 0x5b [163525.726023] ath: regdomain 0x8164 dynamically updated by country IE [163525.726048] cfg80211: Regulatory domain changed to country: IN [163525.726050] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [163525.726052] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [163525.726055] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [163525.726057] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [163525.726059] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [163764.415286] wlan0: authenticate with c4:0a:cb:2d:81:b4 [163764.432933] wlan0: send auth to c4:0a:cb:2d:81:b4 (try 1/3) [163764.433111] cfg80211: Calling CRDA to update world regulatory domain [163764.437239] wlan0: authenticated [163764.437955] wlan0: associate with c4:0a:cb:2d:81:b4 (try 1/3) [163764.440611] cfg80211: World regulatory domain updated: [163764.440616] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [163764.440619] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [163764.440622] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [163764.440624] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [163764.440627] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [163764.440629] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [163764.442106] wlan0: RX AssocResp from c4:0a:cb:2d:81:b4 (capab=0x431 status=0 aid=2) [163764.442162] wlan0: associated [163764.442243] cfg80211: Calling CRDA for country: IN [163764.446139] ath: EEPROM regdomain: 0x8164 [163764.446144] ath: EEPROM indicates we should expect a country code [163764.446146] ath: doing EEPROM country->regdmn map search [163764.446148] ath: country maps to regdmn code: 0x5b [163764.446151] ath: Country alpha2 being used: IN [163764.446153] ath: Regpair used: 0x5b [163764.446155] ath: regdomain 0x8164 dynamically updated by country IE [163764.446180] cfg80211: Regulatory domain changed to country: IN [163764.446182] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [163764.446185] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [163764.446188] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [163764.446190] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [163764.446192] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [165576.669317] wlan0: deauthenticated from c4:0a:cb:2d:81:b4 (Reason: 2) [165576.703270] cfg80211: Calling CRDA to update world regulatory domain [165576.710890] cfg80211: World regulatory domain updated: [165576.710895] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [165576.710899] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [165576.710902] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [165576.710904] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [165576.710907] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [165576.710909] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [165577.746422] wlan0: authenticate with c4:0a:cb:2d:81:b4 [165577.770455] wlan0: send auth to c4:0a:cb:2d:81:b4 (try 1/3) [165577.773406] wlan0: authenticated [165577.777060] wlan0: associate with c4:0a:cb:2d:81:b4 (try 1/3) [165577.781735] wlan0: RX AssocResp from c4:0a:cb:2d:81:b4 (capab=0x431 status=0 aid=2) [165577.781802] wlan0: associated [165577.781914] cfg80211: Calling CRDA for country: IN [165577.785548] ath: EEPROM regdomain: 0x8164 [165577.785553] ath: EEPROM indicates we should expect a country code [165577.785555] ath: doing EEPROM country->regdmn map search [165577.785558] ath: country maps to regdmn code: 0x5b [165577.785560] ath: Country alpha2 being used: IN [165577.785562] ath: Regpair used: 0x5b [165577.785565] ath: regdomain 0x8164 dynamically updated by country IE [165577.785590] cfg80211: Regulatory domain changed to country: IN [165577.785592] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [165577.785595] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [165577.785597] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [165577.785599] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [165577.785602] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [166955.885615] ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root [166961.019308] wlan0: deauthenticating from c4:0a:cb:2d:81:b4 by local choice (reason=3) [166961.046636] cfg80211: Calling CRDA to update world regulatory domain [166961.053177] cfg80211: World regulatory domain updated: [166961.053182] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [166961.053185] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [166961.053188] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [166961.053191] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [166961.053193] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [166961.053196] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [166962.520271] PM: Syncing filesystems ... done. [166962.705616] PM: Preparing system for mem sleep [166962.705733] Freezing user space processes ... (elapsed 0.001 seconds) done. [166962.707368] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [166962.708600] PM: Entering mem sleep [166962.708651] Suspending console(s) (use no_console_suspend to debug) [166962.708841] sd 0:0:0:0: [sda] Synchronizing SCSI cache [166962.709097] sd 0:0:0:0: [sda] Stopping disk [166962.766471] mei_me 0000:00:16.0: H_RDY is not cleared 0x801A1A18 [166963.740076] PM: suspend of devices complete after 1030.147 msecs [166963.756058] PM: late suspend of devices complete after 15.960 msecs [166963.772107] r8169 0000:01:00.0: System wakeup enabled by ACPI [166963.788162] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [166963.804280] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [166963.836141] PM: noirq suspend of devices complete after 79.989 msecs [166963.836354] ACPI: Preparing to enter system sleep state S3 [166963.837368] PM: Saving platform NVS memory [166963.838071] Disabling non-boot CPUs ... [166963.839351] kvm: disabling virtualization on CPU1 [166963.940210] smpboot: CPU 1 is now offline [166963.941694] kvm: disabling virtualization on CPU2 [166964.044319] smpboot: CPU 2 is now offline [166964.045758] kvm: disabling virtualization on CPU3 [166964.148434] smpboot: CPU 3 is now offline [166964.149622] ACPI: Low-level resume complete [166964.149668] PM: Restoring platform NVS memory [166964.150170] Enabling non-boot CPUs ... [166964.150206] x86: Booting SMP configuration: [166964.150206] smpboot: Booting Node 0 Processor 1 APIC 0x1 [166964.177684] kvm: enabling virtualization on CPU1 [166964.180060] CPU1 is up [166964.180077] smpboot: Booting Node 0 Processor 2 APIC 0x2 [166964.191525] kvm: enabling virtualization on CPU2 [166964.193897] CPU2 is up [166964.193913] smpboot: Booting Node 0 Processor 3 APIC 0x3 [166964.205357] kvm: enabling virtualization on CPU3 [166964.207660] CPU3 is up [166964.210778] ACPI: Waking up from system sleep state S3 [166964.262014] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [166964.294036] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [166964.358384] PM: noirq resume of devices complete after 140.615 msecs [166964.358487] PM: early resume of devices complete after 0.081 msecs [166964.358529] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X [166964.358684] ath: phy0: ASPM enabled: 0x43 [166964.358720] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [166964.358910] r8169 0000:01:00.0: System wakeup disabled by ACPI [166964.570556] usb 2-1.4: reset full-speed USB device number 9 using ehci-pci [166964.662801] usb 2-1.4: device firmware changed [166964.702489] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [166964.703996] ata3.00: configured for UDMA/100 [166964.734736] usb 2-1.3: reset high-speed USB device number 3 using ehci-pci [166965.523778] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [166967.898160] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [166967.933623] ata1.00: configured for UDMA/100 [166967.958284] sd 0:0:0:0: [sda] Starting disk [166967.984243] PM: resume of devices complete after 3621.609 msecs [166967.984430] PM: Finishing wakeup. [166967.984482] r8169 0000:01:00.0: no hotplug settings from platform [166967.984559] ath9k 0000:02:00.0: no hotplug settings from platform [166967.984615] rtsx_pci 0000:03:00.0: no hotplug settings from platform [166967.986331] usb 2-1.4: USB disconnect, device number 9 [166967.984433] Restarting tasks ... done. [166968.034433] video LNXVIDEO:00: Restoring backlight state [166968.058329] usb 2-1.4: new full-speed USB device number 10 using ehci-pci [166968.152320] usb 2-1.4: New USB device found, idVendor=0cf3, idProduct=311d [166968.152327] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [166968.152331] usb 2-1.4: Product: Bluetooth USB Host Controller [166968.152334] usb 2-1.4: Manufacturer: Atheros Communications [166968.152337] usb 2-1.4: SerialNumber: Alaska Day 2006 [166968.461694] usb 2-1.4: USB disconnect, device number 10 [166968.517866] r8169 0000:01:00.0 eth0: link down [166968.517931] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [166968.560838] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [166968.663183] usb 2-1.4: new full-speed USB device number 11 using ehci-pci [166968.757777] usb 2-1.4: New USB device found, idVendor=0cf3, idProduct=311d [166968.757782] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [166968.757785] usb 2-1.4: Product: Bluetooth USB Host Controller [166968.757787] usb 2-1.4: Manufacturer: Atheros Communications [166968.757789] usb 2-1.4: SerialNumber: Alaska Day 2006 [166969.580782] wlan0: authenticate with 2c:3e:cf:8f:4e:e4 [166969.599077] wlan0: direct probe to 2c:3e:cf:8f:4e:e4 (try 1/3) [166969.800310] wlan0: direct probe to 2c:3e:cf:8f:4e:e4 (try 2/3) [166970.004501] wlan0: send auth to 2c:3e:cf:8f:4e:e4 (try 3/3) [166970.006392] wlan0: authenticated [166970.008504] wlan0: associate with 2c:3e:cf:8f:4e:e4 (try 1/3) [166970.013399] wlan0: RX AssocResp from 2c:3e:cf:8f:4e:e4 (capab=0x431 status=0 aid=8) [166970.013452] wlan0: associated [166970.013480] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [166970.013557] cfg80211: Calling CRDA for country: IN [166970.015875] ath: EEPROM regdomain: 0x8164 [166970.015883] ath: EEPROM indicates we should expect a country code [166970.015885] ath: doing EEPROM country->regdmn map search [166970.015886] ath: country maps to regdmn code: 0x5b [166970.015887] ath: Country alpha2 being used: IN [166970.015888] ath: Regpair used: 0x5b [166970.015890] ath: regdomain 0x8164 dynamically updated by country IE [166970.015916] cfg80211: Regulatory domain changed to country: IN [166970.015917] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [166970.015919] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [166970.015920] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [166970.015921] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [166970.015923] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [167213.005229] ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root [168686.431115] ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root [168697.783006] ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root [168782.255160] wlan0: deauthenticated from 2c:3e:cf:8f:4e:e4 (Reason: 2) [168782.281404] cfg80211: Calling CRDA to update world regulatory domain [168782.288406] cfg80211: World regulatory domain updated: [168782.288411] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [168782.288415] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [168782.288418] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [168782.288421] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [168782.288423] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [168782.288426] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [168782.548489] wlan0: authenticate with 2c:3e:cf:8f:48:34 [168782.564434] wlan0: direct probe to 2c:3e:cf:8f:48:34 (try 1/3) [168782.766978] wlan0: direct probe to 2c:3e:cf:8f:48:34 (try 2/3) [168782.971210] wlan0: direct probe to 2c:3e:cf:8f:48:34 (try 3/3) [168783.175446] wlan0: authentication with 2c:3e:cf:8f:48:34 timed out [168783.473091] wlan0: authenticate with b0:00:b4:20:69:34 [168783.489401] wlan0: send auth to b0:00:b4:20:69:34 (try 1/3) [168783.491305] wlan0: authenticated [168783.491775] wlan0: associate with b0:00:b4:20:69:34 (try 1/3) [168783.495296] wlan0: RX AssocResp from b0:00:b4:20:69:34 (capab=0x431 status=0 aid=5) [168783.495357] wlan0: associated [168783.495450] cfg80211: Calling CRDA for country: IN [168783.498988] ath: EEPROM regdomain: 0x8164 [168783.498993] ath: EEPROM indicates we should expect a country code [168783.498996] ath: doing EEPROM country->regdmn map search [168783.498998] ath: country maps to regdmn code: 0x5b [168783.499001] ath: Country alpha2 being used: IN [168783.499003] ath: Regpair used: 0x5b [168783.499006] ath: regdomain 0x8164 dynamically updated by country IE [168783.499029] cfg80211: Regulatory domain changed to country: IN [168783.499031] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [168783.499033] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [168783.499036] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [168783.499038] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [168783.499040] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [168968.357256] wlan0: authenticate with b0:00:b4:20:63:a4 [168968.375005] wlan0: direct probe to b0:00:b4:20:63:a4 (try 1/3) [168968.375176] cfg80211: Calling CRDA to update world regulatory domain [168968.381527] cfg80211: World regulatory domain updated: [168968.381533] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [168968.381537] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [168968.381540] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [168968.381542] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [168968.381545] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [168968.381547] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [168968.579208] wlan0: send auth to b0:00:b4:20:63:a4 (try 2/3) [168968.581150] wlan0: authenticated [168968.583209] wlan0: associate with b0:00:b4:20:63:a4 (try 1/3) [168968.586749] wlan0: RX AssocResp from b0:00:b4:20:63:a4 (capab=0x431 status=0 aid=1) [168968.586824] wlan0: associated [168968.586926] cfg80211: Calling CRDA for country: IN [168968.590738] ath: EEPROM regdomain: 0x8164 [168968.590743] ath: EEPROM indicates we should expect a country code [168968.590746] ath: doing EEPROM country->regdmn map search [168968.590748] ath: country maps to regdmn code: 0x5b [168968.590750] ath: Country alpha2 being used: IN [168968.590752] ath: Regpair used: 0x5b [168968.590755] ath: regdomain 0x8164 dynamically updated by country IE [168968.590778] cfg80211: Regulatory domain changed to country: IN [168968.590780] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [168968.590783] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [168968.590785] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [168968.590787] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [168968.590790] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [169088.501510] wlan0: authenticate with b0:00:b4:20:69:34 [169088.519191] wlan0: send auth to b0:00:b4:20:69:34 (try 1/3) [169088.519498] cfg80211: Calling CRDA to update world regulatory domain [169088.521104] wlan0: authenticated [169088.524170] wlan0: associate with b0:00:b4:20:69:34 (try 1/3) [169088.525455] cfg80211: World regulatory domain updated: [169088.525462] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [169088.525467] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [169088.525471] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [169088.525474] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [169088.525478] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [169088.525481] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [169088.527730] wlan0: RX AssocResp from b0:00:b4:20:69:34 (capab=0x431 status=0 aid=5) [169088.527786] wlan0: associated [169088.528423] cfg80211: Calling CRDA for country: IN [169088.531472] ath: EEPROM regdomain: 0x8164 [169088.531477] ath: EEPROM indicates we should expect a country code [169088.531480] ath: doing EEPROM country->regdmn map search [169088.531482] ath: country maps to regdmn code: 0x5b [169088.531485] ath: Country alpha2 being used: IN [169088.531487] ath: Regpair used: 0x5b [169088.531489] ath: regdomain 0x8164 dynamically updated by country IE [169088.531514] cfg80211: Regulatory domain changed to country: IN [169088.531516] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [169088.531519] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [169088.531521] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [169088.531524] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [169088.531526] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [169689.179795] wlan0: authenticate with b0:00:b4:20:63:a4 [169689.197369] wlan0: direct probe to b0:00:b4:20:63:a4 (try 1/3) [169689.197478] cfg80211: Calling CRDA to update world regulatory domain [169689.200377] cfg80211: World regulatory domain updated: [169689.200381] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [169689.200383] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [169689.200386] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [169689.200388] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [169689.200390] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [169689.200392] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [169689.398486] wlan0: send auth to b0:00:b4:20:63:a4 (try 2/3) [169689.401118] wlan0: authenticated [169689.402466] wlan0: associate with b0:00:b4:20:63:a4 (try 1/3) [169689.416867] wlan0: RX AssocResp from b0:00:b4:20:63:a4 (capab=0x431 status=0 aid=2) [169689.416932] wlan0: associated [169689.417018] cfg80211: Calling CRDA for country: IN [169689.420734] ath: EEPROM regdomain: 0x8164 [169689.420738] ath: EEPROM indicates we should expect a country code [169689.420741] ath: doing EEPROM country->regdmn map search [169689.420743] ath: country maps to regdmn code: 0x5b [169689.420746] ath: Country alpha2 being used: IN [169689.420748] ath: Regpair used: 0x5b [169689.420750] ath: regdomain 0x8164 dynamically updated by country IE [169689.420775] cfg80211: Regulatory domain changed to country: IN [169689.420777] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [169689.420780] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [169689.420783] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [169689.420785] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [169689.420787] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [169732.668923] ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root [169809.316510] wlan0: authenticate with b0:00:b4:20:69:34 [169809.334159] wlan0: send auth to b0:00:b4:20:69:34 (try 1/3) [169809.334406] cfg80211: Calling CRDA to update world regulatory domain [169809.337533] wlan0: authenticated [169809.339436] wlan0: associate with b0:00:b4:20:69:34 (try 1/3) [169809.339548] cfg80211: World regulatory domain updated: [169809.339550] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [169809.339566] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [169809.339569] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [169809.339571] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [169809.339572] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [169809.339574] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [169809.342998] wlan0: RX AssocResp from b0:00:b4:20:69:34 (capab=0x431 status=0 aid=2) [169809.343055] wlan0: associated [169809.343114] cfg80211: Calling CRDA for country: IN [169809.345830] ath: EEPROM regdomain: 0x8164 [169809.345834] ath: EEPROM indicates we should expect a country code [169809.345836] ath: doing EEPROM country->regdmn map search [169809.345838] ath: country maps to regdmn code: 0x5b [169809.345840] ath: Country alpha2 being used: IN [169809.345841] ath: Regpair used: 0x5b [169809.345843] ath: regdomain 0x8164 dynamically updated by country IE [169809.345866] cfg80211: Regulatory domain changed to country: IN [169809.345867] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [169809.345869] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [169809.345871] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [169809.345873] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [169809.345875] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [171250.959434] wlan0: authenticate with b0:00:b4:20:63:a4 [171250.977000] wlan0: direct probe to b0:00:b4:20:63:a4 (try 1/3) [171250.977075] cfg80211: Calling CRDA to update world regulatory domain [171250.983291] cfg80211: World regulatory domain updated: [171250.983294] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [171250.983296] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [171250.983297] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [171250.983298] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [171250.983299] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [171250.983300] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [171251.178259] wlan0: send auth to b0:00:b4:20:63:a4 (try 2/3) [171251.182507] wlan0: authenticated [171251.186237] wlan0: associate with b0:00:b4:20:63:a4 (try 1/3) [171251.193459] wlan0: RX AssocResp from b0:00:b4:20:63:a4 (capab=0x431 status=0 aid=1) [171251.193522] wlan0: associated [171251.193600] cfg80211: Calling CRDA for country: IN [171251.197393] ath: EEPROM regdomain: 0x8164 [171251.197398] ath: EEPROM indicates we should expect a country code [171251.197401] ath: doing EEPROM country->regdmn map search [171251.197403] ath: country maps to regdmn code: 0x5b [171251.197406] ath: Country alpha2 being used: IN [171251.197407] ath: Regpair used: 0x5b [171251.197410] ath: regdomain 0x8164 dynamically updated by country IE [171251.197434] cfg80211: Regulatory domain changed to country: IN [171251.197436] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [171251.197439] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [171251.197441] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [171251.197444] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [171251.197446] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [171371.100221] wlan0: authenticate with b0:00:b4:20:69:34 [171371.117851] wlan0: send auth to b0:00:b4:20:69:34 (try 1/3) [171371.118075] cfg80211: Calling CRDA to update world regulatory domain [171371.119742] wlan0: authenticated [171371.123216] wlan0: associate with b0:00:b4:20:69:34 (try 1/3) [171371.124038] cfg80211: World regulatory domain updated: [171371.124041] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [171371.124043] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [171371.124045] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [171371.124047] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [171371.124048] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [171371.124050] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [171371.126745] wlan0: RX AssocResp from b0:00:b4:20:69:34 (capab=0x431 status=0 aid=2) [171371.126802] wlan0: associated [171371.126856] cfg80211: Calling CRDA for country: IN [171371.129202] ath: EEPROM regdomain: 0x8164 [171371.129205] ath: EEPROM indicates we should expect a country code [171371.129206] ath: doing EEPROM country->regdmn map search [171371.129207] ath: country maps to regdmn code: 0x5b [171371.129208] ath: Country alpha2 being used: IN [171371.129209] ath: Regpair used: 0x5b [171371.129210] ath: regdomain 0x8164 dynamically updated by country IE [171371.129229] cfg80211: Regulatory domain changed to country: IN [171371.129230] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [171371.129232] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [171371.129233] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [171371.129234] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [171371.129235] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [171731.512311] wlan0: authenticate with b0:00:b4:20:63:a4 [171731.529871] wlan0: direct probe to b0:00:b4:20:63:a4 (try 1/3) [171731.530176] cfg80211: Calling CRDA to update world regulatory domain [171731.537183] cfg80211: World regulatory domain updated: [171731.537189] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [171731.537193] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [171731.537196] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [171731.537198] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [171731.537201] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [171731.537203] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [171731.731074] wlan0: send auth to b0:00:b4:20:63:a4 (try 2/3) [171731.732996] wlan0: authenticated [171731.735110] wlan0: associate with b0:00:b4:20:63:a4 (try 1/3) [171731.738666] wlan0: RX AssocResp from b0:00:b4:20:63:a4 (capab=0x431 status=0 aid=2) [171731.738725] wlan0: associated [171731.738936] cfg80211: Calling CRDA for country: IN [171731.742591] ath: EEPROM regdomain: 0x8164 [171731.742596] ath: EEPROM indicates we should expect a country code [171731.742598] ath: doing EEPROM country->regdmn map search [171731.742600] ath: country maps to regdmn code: 0x5b [171731.742603] ath: Country alpha2 being used: IN [171731.742604] ath: Regpair used: 0x5b [171731.742607] ath: regdomain 0x8164 dynamically updated by country IE [171731.742632] cfg80211: Regulatory domain changed to country: IN [171731.742634] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [171731.742637] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [171731.742639] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [171731.742642] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [171731.742644] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [171851.657187] wlan0: authenticate with b0:00:b4:20:69:34 [171851.674868] wlan0: send auth to b0:00:b4:20:69:34 (try 1/3) [171851.675258] cfg80211: Calling CRDA to update world regulatory domain [171851.676781] wlan0: authenticated [171851.679896] cfg80211: World regulatory domain updated: [171851.679901] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [171851.679905] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [171851.679907] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [171851.679910] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [171851.679912] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [171851.679914] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [171851.680174] wlan0: associate with b0:00:b4:20:69:34 (try 1/3) [171851.683773] wlan0: RX AssocResp from b0:00:b4:20:69:34 (capab=0x431 status=0 aid=2) [171851.683831] wlan0: associated [171851.684008] cfg80211: Calling CRDA for country: IN [171851.686441] ath: EEPROM regdomain: 0x8164 [171851.686444] ath: EEPROM indicates we should expect a country code [171851.686446] ath: doing EEPROM country->regdmn map search [171851.686447] ath: country maps to regdmn code: 0x5b [171851.686448] ath: Country alpha2 being used: IN [171851.686450] ath: Regpair used: 0x5b [171851.686452] ath: regdomain 0x8164 dynamically updated by country IE [171851.686471] cfg80211: Regulatory domain changed to country: IN [171851.686473] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [171851.686475] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [171851.686477] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [171851.686478] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [171851.686479] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [173664.211531] wlan0: deauthenticated from b0:00:b4:20:69:34 (Reason: 2) [173664.237346] cfg80211: Calling CRDA to update world regulatory domain [173664.292716] cfg80211: World regulatory domain updated: [173664.292720] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [173664.292722] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [173664.292723] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [173664.292725] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [173664.292726] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [173664.292727] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [173664.508614] wlan0: authenticate with b0:00:b4:20:63:a4 [173664.526356] wlan0: send auth to b0:00:b4:20:63:a4 (try 1/3) [173664.529520] wlan0: authenticated [173664.530614] wlan0: associate with b0:00:b4:20:63:a4 (try 1/3) [173664.538849] wlan0: RX AssocResp from b0:00:b4:20:63:a4 (capab=0x431 status=0 aid=3) [173664.538904] wlan0: associated [173664.538956] cfg80211: Calling CRDA for country: IN [173664.541103] ath: EEPROM regdomain: 0x8164 [173664.541106] ath: EEPROM indicates we should expect a country code [173664.541107] ath: doing EEPROM country->regdmn map search [173664.541108] ath: country maps to regdmn code: 0x5b [173664.541110] ath: Country alpha2 being used: IN [173664.541110] ath: Regpair used: 0x5b [173664.541112] ath: regdomain 0x8164 dynamically updated by country IE [173664.541132] cfg80211: Regulatory domain changed to country: IN [173664.541133] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [173664.541134] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [173664.541136] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [173664.541137] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [173664.541138] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [173906.628790] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [173906.628800] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [173906.633883] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [173906.633887] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [173907.542953] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [173907.542963] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [173907.548186] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [173907.548191] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [173908.239376] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [173908.239386] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [173908.245180] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [173908.245185] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [173910.073879] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [173910.073885] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [173910.078397] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [173910.078403] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [173911.677766] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [173911.677772] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [173911.682750] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [173911.682755] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [173912.138820] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [173912.138825] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [173912.143343] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [173912.143363] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [173912.831248] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [173912.831253] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [173912.836687] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [173912.836692] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [175206.078383] systemd-hostnamed[7927]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [175477.596230] wlan0: deauthenticated from b0:00:b4:20:63:a4 (Reason: 2) [175477.632476] cfg80211: Calling CRDA to update world regulatory domain [175477.677762] cfg80211: World regulatory domain updated: [175477.677768] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [175477.677771] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [175477.677774] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [175477.677777] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [175477.677779] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [175477.677782] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [175477.909773] wlan0: authenticate with c4:0a:cb:5c:03:24 [175477.927620] wlan0: direct probe to c4:0a:cb:5c:03:24 (try 1/3) [175478.130083] wlan0: direct probe to c4:0a:cb:5c:03:24 (try 2/3) [175478.334273] wlan0: direct probe to c4:0a:cb:5c:03:24 (try 3/3) [175478.538518] wlan0: authentication with c4:0a:cb:5c:03:24 timed out [175478.836270] wlan0: authenticate with c4:0a:cb:2d:84:e4 [175478.853854] wlan0: send auth to c4:0a:cb:2d:84:e4 (try 1/3) [175478.855743] wlan0: authenticated [175478.858889] wlan0: associate with c4:0a:cb:2d:84:e4 (try 1/3) [175478.865034] wlan0: RX AssocResp from c4:0a:cb:2d:84:e4 (capab=0x431 status=0 aid=1) [175478.865106] wlan0: associated [175478.865251] cfg80211: Calling CRDA for country: IN [175478.867355] ath: EEPROM regdomain: 0x8164 [175478.867358] ath: EEPROM indicates we should expect a country code [175478.867359] ath: doing EEPROM country->regdmn map search [175478.867360] ath: country maps to regdmn code: 0x5b [175478.867361] ath: Country alpha2 being used: IN [175478.867362] ath: Regpair used: 0x5b [175478.867363] ath: regdomain 0x8164 dynamically updated by country IE [175478.867382] cfg80211: Regulatory domain changed to country: IN [175478.867383] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [175478.867384] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [175478.867385] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [175478.867386] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [175478.867387] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [176798.249468] cfg80211: Calling CRDA to update world regulatory domain [176798.256936] cfg80211: World regulatory domain updated: [176798.256942] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [176798.256945] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [176798.256948] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [176798.256951] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [176798.256953] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [176798.256956] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [176799.292288] wlan0: authenticate with b0:00:b4:20:69:34 [176799.316228] wlan0: send auth to b0:00:b4:20:69:34 (try 1/3) [176799.321814] wlan0: authenticated [176799.323061] wlan0: associate with b0:00:b4:20:69:34 (try 1/3) [176799.326654] wlan0: RX AssocResp from b0:00:b4:20:69:34 (capab=0x431 status=0 aid=7) [176799.326733] wlan0: associated [176799.326874] cfg80211: Calling CRDA for country: IN [176799.330568] ath: EEPROM regdomain: 0x8164 [176799.330573] ath: EEPROM indicates we should expect a country code [176799.330576] ath: doing EEPROM country->regdmn map search [176799.330578] ath: country maps to regdmn code: 0x5b [176799.330580] ath: Country alpha2 being used: IN [176799.330582] ath: Regpair used: 0x5b [176799.330585] ath: regdomain 0x8164 dynamically updated by country IE [176799.330611] cfg80211: Regulatory domain changed to country: IN [176799.330613] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [176799.330616] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [176799.330618] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [176799.330621] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [176799.330623] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [176897.413700] wlan0: authenticate with 2c:3e:cf:8f:4e:e4 [176897.431512] wlan0: direct probe to 2c:3e:cf:8f:4e:e4 (try 1/3) [176897.431624] cfg80211: Calling CRDA to update world regulatory domain [176897.438293] cfg80211: World regulatory domain updated: [176897.438299] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [176897.438303] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [176897.438305] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [176897.438308] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [176897.438310] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [176897.438313] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [176897.635374] wlan0: send auth to 2c:3e:cf:8f:4e:e4 (try 2/3) [176897.637370] wlan0: authenticated [176897.639371] wlan0: associate with 2c:3e:cf:8f:4e:e4 (try 1/3) [176897.642988] wlan0: RX AssocResp from 2c:3e:cf:8f:4e:e4 (capab=0x431 status=0 aid=14) [176897.643082] wlan0: associated [176897.643888] cfg80211: Calling CRDA for country: IN [176897.647622] ath: EEPROM regdomain: 0x8164 [176897.647626] ath: EEPROM indicates we should expect a country code [176897.647629] ath: doing EEPROM country->regdmn map search [176897.647631] ath: country maps to regdmn code: 0x5b [176897.647634] ath: Country alpha2 being used: IN [176897.647635] ath: Regpair used: 0x5b [176897.647638] ath: regdomain 0x8164 dynamically updated by country IE [176897.647663] cfg80211: Regulatory domain changed to country: IN [176897.647665] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [176897.647668] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [176897.647671] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [176897.647673] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [176897.647675] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [178349.466627] systemd-timedated[8686]: /etc/localtime should be a symbolic link to a timezone data file in /usr/share/zoneinfo/. [178709.783355] wlan0: deauthenticated from 2c:3e:cf:8f:4e:e4 (Reason: 2) [178709.823060] cfg80211: Calling CRDA to update world regulatory domain [178709.855372] cfg80211: World regulatory domain updated: [178709.855378] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [178709.855381] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [178709.855384] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [178709.855386] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [178709.855389] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [178709.855391] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [178710.090754] wlan0: authenticate with b0:00:b4:20:69:34 [178710.104269] wlan0: send auth to b0:00:b4:20:69:34 (try 1/3) [178710.106140] wlan0: authenticated [178710.109433] wlan0: associate with b0:00:b4:20:69:34 (try 1/3) [178710.112948] wlan0: RX AssocResp from b0:00:b4:20:69:34 (capab=0x431 status=0 aid=5) [178710.113010] wlan0: associated [178710.113176] cfg80211: Calling CRDA for country: IN [178710.116689] ath: EEPROM regdomain: 0x8164 [178710.116694] ath: EEPROM indicates we should expect a country code [178710.116697] ath: doing EEPROM country->regdmn map search [178710.116699] ath: country maps to regdmn code: 0x5b [178710.116701] ath: Country alpha2 being used: IN [178710.116703] ath: Regpair used: 0x5b [178710.116706] ath: regdomain 0x8164 dynamically updated by country IE [178710.116731] cfg80211: Regulatory domain changed to country: IN [178710.116733] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [178710.116735] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [178710.116738] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [178710.116740] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [178710.116742] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [180020.984425] wlan0: authenticate with 2c:3e:cf:8f:48:34 [180021.002018] wlan0: direct probe to 2c:3e:cf:8f:48:34 (try 1/3) [180021.002180] cfg80211: Calling CRDA to update world regulatory domain [180021.004887] cfg80211: World regulatory domain updated: [180021.004890] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [180021.004891] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [180021.004893] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [180021.004894] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [180021.004895] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [180021.004896] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [180021.202866] wlan0: direct probe to 2c:3e:cf:8f:48:34 (try 2/3) [180021.407136] wlan0: send auth to 2c:3e:cf:8f:48:34 (try 3/3) [180021.424987] wlan0: authenticated [180021.427127] wlan0: associate with 2c:3e:cf:8f:48:34 (try 1/3) [180021.433052] wlan0: RX AssocResp from 2c:3e:cf:8f:48:34 (capab=0x431 status=0 aid=1) [180021.433118] wlan0: associated [180021.433319] cfg80211: Calling CRDA for country: IN [180021.437137] ath: EEPROM regdomain: 0x8164 [180021.437142] ath: EEPROM indicates we should expect a country code [180021.437144] ath: doing EEPROM country->regdmn map search [180021.437147] ath: country maps to regdmn code: 0x5b [180021.437149] ath: Country alpha2 being used: IN [180021.437151] ath: Regpair used: 0x5b [180021.437153] ath: regdomain 0x8164 dynamically updated by country IE [180021.437177] cfg80211: Regulatory domain changed to country: IN [180021.437179] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [180021.437182] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [180021.437185] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [180021.437187] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [180021.437189] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [180501.529098] wlan0: authenticate with b0:00:b4:20:69:34 [180501.546687] wlan0: send auth to b0:00:b4:20:69:34 (try 1/3) [180501.546777] cfg80211: Calling CRDA to update world regulatory domain [180501.549008] wlan0: authenticated [180501.550043] cfg80211: World regulatory domain updated: [180501.550045] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [180501.550048] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [180501.550050] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [180501.550052] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [180501.550053] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [180501.550055] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [180501.551724] wlan0: associate with b0:00:b4:20:69:34 (try 1/3) [180501.555307] wlan0: RX AssocResp from b0:00:b4:20:69:34 (capab=0x431 status=0 aid=3) [180501.555362] wlan0: associated [180501.555484] cfg80211: Calling CRDA for country: IN [180501.557887] ath: EEPROM regdomain: 0x8164 [180501.557889] ath: EEPROM indicates we should expect a country code [180501.557891] ath: doing EEPROM country->regdmn map search [180501.557893] ath: country maps to regdmn code: 0x5b [180501.557894] ath: Country alpha2 being used: IN [180501.557895] ath: Regpair used: 0x5b [180501.557897] ath: regdomain 0x8164 dynamically updated by country IE [180501.557917] cfg80211: Regulatory domain changed to country: IN [180501.557919] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [180501.557920] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [180501.557922] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [180501.557923] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [180501.557925] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [182314.481676] wlan0: deauthenticated from b0:00:b4:20:69:34 (Reason: 2) [182314.512674] cfg80211: Calling CRDA to update world regulatory domain [182314.520222] cfg80211: World regulatory domain updated: [182314.520227] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [182314.520230] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [182314.520233] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [182314.520236] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [182314.520238] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [182314.520240] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [182314.782391] wlan0: authenticate with 2c:3e:cf:8f:48:34 [182314.800244] wlan0: send auth to 2c:3e:cf:8f:48:34 (try 1/3) [182314.802169] wlan0: authenticated [182314.802488] wlan0: associate with 2c:3e:cf:8f:48:34 (try 1/3) [182314.806029] wlan0: RX AssocResp from 2c:3e:cf:8f:48:34 (capab=0x431 status=0 aid=3) [182314.806091] wlan0: associated [182314.806232] cfg80211: Calling CRDA for country: IN [182314.809175] ath: EEPROM regdomain: 0x8164 [182314.809179] ath: EEPROM indicates we should expect a country code [182314.809181] ath: doing EEPROM country->regdmn map search [182314.809183] ath: country maps to regdmn code: 0x5b [182314.809185] ath: Country alpha2 being used: IN [182314.809187] ath: Regpair used: 0x5b [182314.809189] ath: regdomain 0x8164 dynamically updated by country IE [182314.809213] cfg80211: Regulatory domain changed to country: IN [182314.809215] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [182314.809218] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [182314.809220] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [182314.809222] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [182314.809224] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [182543.861698] wlan0: authenticate with c4:0a:cb:5c:03:24 [182543.879277] wlan0: direct probe to c4:0a:cb:5c:03:24 (try 1/3) [182543.879407] cfg80211: Calling CRDA to update world regulatory domain [182543.886004] cfg80211: World regulatory domain updated: [182543.886009] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [182543.886013] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [182543.886016] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [182543.886018] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [182543.886021] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [182543.886023] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [182544.080432] wlan0: direct probe to c4:0a:cb:5c:03:24 (try 2/3) [182544.284661] wlan0: send auth to c4:0a:cb:5c:03:24 (try 3/3) [182544.286690] wlan0: authenticated [182544.288646] wlan0: associate with c4:0a:cb:5c:03:24 (try 1/3) [182544.297428] wlan0: RX AssocResp from c4:0a:cb:5c:03:24 (capab=0x431 status=0 aid=1) [182544.297502] wlan0: associated [182544.297840] cfg80211: Calling CRDA for country: IN [182544.301678] ath: EEPROM regdomain: 0x8164 [182544.301683] ath: EEPROM indicates we should expect a country code [182544.301686] ath: doing EEPROM country->regdmn map search [182544.301688] ath: country maps to regdmn code: 0x5b [182544.301691] ath: Country alpha2 being used: IN [182544.301692] ath: Regpair used: 0x5b [182544.301695] ath: regdomain 0x8164 dynamically updated by country IE [182544.301720] cfg80211: Regulatory domain changed to country: IN [182544.301722] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [182544.301725] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [182544.301728] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [182544.301730] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [182544.301732] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [182891.736928] cfg80211: Calling CRDA to update world regulatory domain [182891.744975] cfg80211: World regulatory domain updated: [182891.744979] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [182891.744982] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [182891.744984] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [182891.744985] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [182891.744987] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [182891.744989] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [182892.007323] wlan0: authenticate with b0:00:b4:20:63:a4 [182892.033869] wlan0: direct probe to b0:00:b4:20:63:a4 (try 1/3) [182892.238027] wlan0: direct probe to b0:00:b4:20:63:a4 (try 2/3) [182892.442293] wlan0: direct probe to b0:00:b4:20:63:a4 (try 3/3) [182892.646468] wlan0: authentication with b0:00:b4:20:63:a4 timed out [182892.888306] wlan0: authenticate with 2c:3e:cf:8f:48:34 [182892.912152] wlan0: direct probe to 2c:3e:cf:8f:48:34 (try 1/3) [182893.115039] wlan0: direct probe to 2c:3e:cf:8f:48:34 (try 2/3) [182893.319261] wlan0: direct probe to 2c:3e:cf:8f:48:34 (try 3/3) [182893.523542] wlan0: authentication with 2c:3e:cf:8f:48:34 timed out [182893.708845] wlan0: authenticate with c4:0a:cb:2d:84:e4 [182893.733087] wlan0: send auth to c4:0a:cb:2d:84:e4 (try 1/3) [182893.735011] wlan0: authenticated [182893.735746] wlan0: associate with c4:0a:cb:2d:84:e4 (try 1/3) [182893.741821] wlan0: RX AssocResp from c4:0a:cb:2d:84:e4 (capab=0x431 status=0 aid=1) [182893.741904] wlan0: associated [182893.742146] cfg80211: Calling CRDA for country: IN [182893.746335] ath: EEPROM regdomain: 0x8164 [182893.746341] ath: EEPROM indicates we should expect a country code [182893.746343] ath: doing EEPROM country->regdmn map search [182893.746345] ath: country maps to regdmn code: 0x5b [182893.746348] ath: Country alpha2 being used: IN [182893.746349] ath: Regpair used: 0x5b [182893.746352] ath: regdomain 0x8164 dynamically updated by country IE [182893.746378] cfg80211: Regulatory domain changed to country: IN [182893.746380] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [182893.746383] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [182893.746385] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [182893.746387] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [182893.746390] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [182961.208792] EXT4-fs (sda1): error count since last fsck: 2 [182961.208797] EXT4-fs (sda1): initial error at time 1421487824: ext4_find_entry:1302: inode 396511 [182961.208800] EXT4-fs (sda1): last error at time 1421608801: ext4_find_entry:1302: inode 396511 [184464.532372] ath: phy0: Failed to stop TX DMA, queues=0x001! [184706.518668] wlan0: deauthenticated from c4:0a:cb:2d:84:e4 (Reason: 2) [184706.552745] cfg80211: Calling CRDA to update world regulatory domain [184706.560036] cfg80211: World regulatory domain updated: [184706.560041] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [184706.560045] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [184706.560048] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [184706.560050] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [184706.560053] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [184706.560055] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [184707.592633] wlan0: authenticate with b0:00:b4:20:69:34 [184707.616645] wlan0: send auth to b0:00:b4:20:69:34 (try 1/3) [184707.618566] wlan0: authenticated [184707.619454] wlan0: associate with b0:00:b4:20:69:34 (try 1/3) [184707.622957] wlan0: RX AssocResp from b0:00:b4:20:69:34 (capab=0x431 status=0 aid=4) [184707.623034] wlan0: associated [184707.623196] cfg80211: Calling CRDA for country: IN [184707.626774] ath: EEPROM regdomain: 0x8164 [184707.626780] ath: EEPROM indicates we should expect a country code [184707.626782] ath: doing EEPROM country->regdmn map search [184707.626784] ath: country maps to regdmn code: 0x5b [184707.626787] ath: Country alpha2 being used: IN [184707.626789] ath: Regpair used: 0x5b [184707.626792] ath: regdomain 0x8164 dynamically updated by country IE [184707.626818] cfg80211: Regulatory domain changed to country: IN [184707.626820] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [184707.626823] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [184707.626825] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [184707.626828] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [184707.626830] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [185307.017766] wlan0: authenticate with 2c:3e:cf:8f:4e:e4 [185307.035621] wlan0: send auth to 2c:3e:cf:8f:4e:e4 (try 1/3) [185307.035768] cfg80211: Calling CRDA to update world regulatory domain [185307.038694] cfg80211: World regulatory domain updated: [185307.038696] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [185307.038698] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [185307.038700] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [185307.038701] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [185307.038702] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [185307.038703] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [185307.040787] wlan0: authenticated [185307.044067] wlan0: associate with 2c:3e:cf:8f:4e:e4 (try 1/3) [185307.047647] wlan0: RX AssocResp from 2c:3e:cf:8f:4e:e4 (capab=0x431 status=0 aid=1) [185307.047702] wlan0: associated [185307.047874] cfg80211: Calling CRDA for country: IN [185307.050056] ath: EEPROM regdomain: 0x8164 [185307.050058] ath: EEPROM indicates we should expect a country code [185307.050059] ath: doing EEPROM country->regdmn map search [185307.050060] ath: country maps to regdmn code: 0x5b [185307.050061] ath: Country alpha2 being used: IN [185307.050062] ath: Regpair used: 0x5b [185307.050064] ath: regdomain 0x8164 dynamically updated by country IE [185307.050085] cfg80211: Regulatory domain changed to country: IN [185307.050086] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [185307.050087] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [185307.050089] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [185307.050090] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [185307.050091] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [187119.566386] wlan0: deauthenticated from 2c:3e:cf:8f:4e:e4 (Reason: 2) [187119.601838] cfg80211: Calling CRDA to update world regulatory domain [187119.681360] cfg80211: World regulatory domain updated: [187119.681367] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [187119.681370] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [187119.681373] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [187119.681376] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [187119.681378] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [187119.681381] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [187119.876092] wlan0: authenticate with b0:00:b4:20:69:34 [187119.894014] wlan0: send auth to b0:00:b4:20:69:34 (try 1/3) [187119.895906] wlan0: authenticated [187119.898617] wlan0: associate with b0:00:b4:20:69:34 (try 1/3) [187119.902165] wlan0: RX AssocResp from b0:00:b4:20:69:34 (capab=0x431 status=0 aid=5) [187119.902231] wlan0: associated [187119.902330] cfg80211: Calling CRDA for country: IN [187119.905125] ath: EEPROM regdomain: 0x8164 [187119.905128] ath: EEPROM indicates we should expect a country code [187119.905130] ath: doing EEPROM country->regdmn map search [187119.905131] ath: country maps to regdmn code: 0x5b [187119.905133] ath: Country alpha2 being used: IN [187119.905134] ath: Regpair used: 0x5b [187119.905136] ath: regdomain 0x8164 dynamically updated by country IE [187119.905157] cfg80211: Regulatory domain changed to country: IN [187119.905158] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [187119.905160] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [187119.905162] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [187119.905163] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [187119.905165] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [187349.346373] wlan0: authenticate with c4:0a:cb:2d:84:e4 [187349.364029] wlan0: direct probe to c4:0a:cb:2d:84:e4 (try 1/3) [187349.364180] cfg80211: Calling CRDA to update world regulatory domain [187349.370349] cfg80211: World regulatory domain updated: [187349.370351] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [187349.370353] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [187349.370354] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [187349.370355] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [187349.370356] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [187349.370357] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [187349.564991] wlan0: direct probe to c4:0a:cb:2d:84:e4 (try 2/3) [187349.769222] wlan0: direct probe to c4:0a:cb:2d:84:e4 (try 3/3) [187349.973429] wlan0: authentication with c4:0a:cb:2d:84:e4 timed out [187350.275724] wlan0: authenticate with b0:00:b4:20:69:34 [187350.301791] wlan0: send auth to b0:00:b4:20:69:34 (try 1/3) [187350.304203] wlan0: authenticated [187350.305770] wlan0: associate with b0:00:b4:20:69:34 (try 1/3) [187350.311239] wlan0: RX AssocResp from b0:00:b4:20:69:34 (capab=0x431 status=0 aid=5) [187350.311312] wlan0: associated [187350.311497] cfg80211: Calling CRDA for country: IN [187350.313601] ath: EEPROM regdomain: 0x8164 [187350.313603] ath: EEPROM indicates we should expect a country code [187350.313604] ath: doing EEPROM country->regdmn map search [187350.313605] ath: country maps to regdmn code: 0x5b [187350.313607] ath: Country alpha2 being used: IN [187350.313607] ath: Regpair used: 0x5b [187350.313608] ath: regdomain 0x8164 dynamically updated by country IE [187350.313627] cfg80211: Regulatory domain changed to country: IN [187350.313628] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [187350.313629] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [187350.313630] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [187350.313631] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [187350.313632] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [187725.781308] ath: phy0: Failed to stop TX DMA, queues=0x004! [187725.794653] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [187725.794696] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [188030.233703] systemd-timedated[9891]: /etc/localtime should be a symbolic link to a timezone data file in /usr/share/zoneinfo/. [188177.952658] type=1400 audit(1421702088.209:88): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=10097 comm="apparmor_parser" [188177.952667] type=1400 audit(1421702088.209:89): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=10097 comm="apparmor_parser" [188177.953029] type=1400 audit(1421702088.209:90): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=10097 comm="apparmor_parser" [188195.365595] ata1.00: exception Emask 0x0 SAct 0x3e0000 SErr 0x0 action 0x0 [188195.365611] ata1.00: irq_stat 0x40000001 [188195.365614] ata1.00: failed command: READ FPDMA QUEUED [188195.365621] ata1.00: cmd 60/08:88:28:1b:c1/00:00:00:00:00/40 tag 17 ncq 4096 in [188195.365621] res 41/40:00:2f:1b:c1/00:00:00:00:00/00 Emask 0x409 (media error) [188195.365623] ata1.00: status: { DRDY ERR } [188195.365624] ata1.00: error: { UNC } [188195.365625] ata1.00: failed command: WRITE FPDMA QUEUED [188195.365632] ata1.00: cmd 61/a0:90:78:27:8d/00:00:04:00:00/40 tag 18 ncq 81920 out [188195.365632] res 41/04:08:2f:1b:c1/00:00:00:00:00/00 Emask 0x1 (device error) [188195.365633] ata1.00: status: { DRDY ERR } [188195.365634] ata1.00: error: { ABRT } [188195.365635] ata1.00: failed command: WRITE FPDMA QUEUED [188195.365641] ata1.00: cmd 61/18:98:a8:69:a6/00:00:1f:00:00/40 tag 19 ncq 12288 out [188195.365641] res 41/04:08:2f:1b:c1/00:00:00:00:00/00 Emask 0x1 (device error) [188195.365643] ata1.00: status: { DRDY ERR } [188195.365644] ata1.00: error: { ABRT } [188195.365645] ata1.00: failed command: WRITE FPDMA QUEUED [188195.365649] ata1.00: cmd 61/08:a0:e8:57:cf/00:00:06:00:00/40 tag 20 ncq 4096 out [188195.365649] res 41/04:08:2f:1b:c1/00:00:00:00:00/00 Emask 0x1 (device error) [188195.365651] ata1.00: status: { DRDY ERR } [188195.365652] ata1.00: error: { ABRT } [188195.365653] ata1.00: failed command: WRITE FPDMA QUEUED [188195.365658] ata1.00: cmd 61/00:a8:f0:57:cf/04:00:06:00:00/40 tag 21 ncq 524288 out [188195.365658] res 41/04:08:2f:1b:c1/00:00:00:00:00/00 Emask 0x1 (device error) [188195.365660] ata1.00: status: { DRDY ERR } [188195.365660] ata1.00: error: { ABRT } [188195.544910] ata1.00: configured for UDMA/100 [188195.544938] sd 0:0:0:0: [sda] Unhandled sense code [188195.544940] sd 0:0:0:0: [sda] [188195.544941] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [188195.544942] sd 0:0:0:0: [sda] [188195.544943] Sense Key : Medium Error [current] [descriptor] [188195.544946] Descriptor sense data with sense descriptors (in hex): [188195.544947] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [188195.544951] 00 c1 1b 2f [188195.544953] sd 0:0:0:0: [sda] [188195.544955] Add. Sense: Unrecovered read error - auto reallocate failed [188195.544956] sd 0:0:0:0: [sda] CDB: [188195.544957] Read(10): 28 00 00 c1 1b 28 00 00 08 00 [188195.544961] end_request: I/O error, dev sda, sector 12655407 [188195.544989] ata1: EH complete [188195.545006] EXT4-fs error (device sda1): ext4_find_entry:1302: inode #396511: comm updatedb.mlocat: reading directory lblock 0 [189162.739642] wlan0: deauthenticated from b0:00:b4:20:69:34 (Reason: 2) [189162.770349] cfg80211: Calling CRDA to update world regulatory domain [189162.863131] cfg80211: World regulatory domain updated: [189162.863135] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [189162.863137] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [189162.863138] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [189162.863140] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [189162.863141] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [189162.863143] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [189162.978052] wlan0: authenticate with 2c:3e:cf:8f:48:34 [189163.001334] wlan0: direct probe to 2c:3e:cf:8f:48:34 (try 1/3) [189163.204421] wlan0: send auth to 2c:3e:cf:8f:48:34 (try 2/3) [189163.219448] wlan0: authenticated [189163.220399] wlan0: associate with 2c:3e:cf:8f:48:34 (try 1/3) [189163.224174] wlan0: RX AssocResp from 2c:3e:cf:8f:48:34 (capab=0x431 status=0 aid=2) [189163.224246] wlan0: associated [189163.224561] cfg80211: Calling CRDA for country: IN [189163.228465] ath: EEPROM regdomain: 0x8164 [189163.228468] ath: EEPROM indicates we should expect a country code [189163.228470] ath: doing EEPROM country->regdmn map search [189163.228471] ath: country maps to regdmn code: 0x5b [189163.228473] ath: Country alpha2 being used: IN [189163.228474] ath: Regpair used: 0x5b [189163.228476] ath: regdomain 0x8164 dynamically updated by country IE [189163.228499] cfg80211: Regulatory domain changed to country: IN [189163.228500] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [189163.228502] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [189163.228504] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [189163.228506] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [189163.228507] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [189521.488369] wlan0: deauthenticating from 2c:3e:cf:8f:48:34 by local choice (reason=3) [189521.504338] cfg80211: Calling CRDA to update world regulatory domain [189521.513170] cfg80211: World regulatory domain updated: [189521.513175] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [189521.513178] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [189521.513181] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [189521.513184] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [189521.513187] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [189521.513189] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [189522.684284] PM: Syncing filesystems ... done. [189522.940221] PM: Preparing system for mem sleep [189522.940339] Freezing user space processes ... (elapsed 0.001 seconds) done. [189522.942235] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [189522.943323] PM: Entering mem sleep [189522.943380] Suspending console(s) (use no_console_suspend to debug) [189522.943588] sd 0:0:0:0: [sda] Synchronizing SCSI cache [189522.943862] sd 0:0:0:0: [sda] Stopping disk [189523.001061] mei_me 0000:00:16.0: H_RDY is not cleared 0x801A1A18 [189523.976480] PM: suspend of devices complete after 1031.820 msecs [189523.992466] PM: late suspend of devices complete after 15.964 msecs [189524.008523] r8169 0000:01:00.0: System wakeup enabled by ACPI [189524.024581] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [189524.040695] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [189524.072551] PM: noirq suspend of devices complete after 79.991 msecs [189524.072764] ACPI: Preparing to enter system sleep state S3 [189524.074765] PM: Saving platform NVS memory [189524.075391] Disabling non-boot CPUs ... [189524.076654] kvm: disabling virtualization on CPU1 [189524.076868] smpboot: CPU 1 is now offline [189524.078303] kvm: disabling virtualization on CPU2 [189524.180646] smpboot: CPU 2 is now offline [189524.181088] Broke affinity for irq 18 [189524.181097] Broke affinity for irq 23 [189524.181100] Broke affinity for irq 42 [189524.182102] kvm: disabling virtualization on CPU3 [189524.284740] smpboot: CPU 3 is now offline [189524.285938] ACPI: Low-level resume complete [189524.285985] PM: Restoring platform NVS memory [189524.286477] Enabling non-boot CPUs ... [189524.286512] x86: Booting SMP configuration: [189524.286513] smpboot: Booting Node 0 Processor 1 APIC 0x1 [189524.314020] kvm: enabling virtualization on CPU1 [189524.316394] CPU1 is up [189524.316410] smpboot: Booting Node 0 Processor 2 APIC 0x2 [189524.327859] kvm: enabling virtualization on CPU2 [189524.330247] CPU2 is up [189524.330264] smpboot: Booting Node 0 Processor 3 APIC 0x3 [189524.341706] kvm: enabling virtualization on CPU3 [189524.344094] CPU3 is up [189524.347224] ACPI: Waking up from system sleep state S3 [189524.402326] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [189524.434346] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [189524.498690] PM: noirq resume of devices complete after 143.849 msecs [189524.498794] PM: early resume of devices complete after 0.081 msecs [189524.498838] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X [189524.498991] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [189524.499074] r8169 0000:01:00.0: System wakeup disabled by ACPI [189524.499136] ath: phy0: ASPM enabled: 0x43 [189524.710783] usb 2-1.3: reset high-speed USB device number 3 using ehci-pci [189524.834826] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [189524.836340] ata3.00: configured for UDMA/100 [189524.874977] usb 2-1.4: reset full-speed USB device number 11 using ehci-pci [189524.967213] usb 2-1.4: device firmware changed [189526.304836] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [189527.982418] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [189528.022791] ata1.00: configured for UDMA/100 [189528.046551] sd 0:0:0:0: [sda] Starting disk [189528.079719] PM: resume of devices complete after 3576.831 msecs [189528.079907] PM: Finishing wakeup. [189528.079960] r8169 0000:01:00.0: no hotplug settings from platform [189528.080033] ath9k 0000:02:00.0: no hotplug settings from platform [189528.080093] rtsx_pci 0000:03:00.0: no hotplug settings from platform [189528.085394] usb 2-1.4: USB disconnect, device number 11 [189528.079909] Restarting tasks ... done. [189528.110535] video LNXVIDEO:00: Restoring backlight state [189528.162696] usb 2-1.4: new full-speed USB device number 12 using ehci-pci [189528.256892] usb 2-1.4: New USB device found, idVendor=0cf3, idProduct=311d [189528.256900] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [189528.256904] usb 2-1.4: Product: Bluetooth USB Host Controller [189528.256907] usb 2-1.4: Manufacturer: Atheros Communications [189528.256910] usb 2-1.4: SerialNumber: Alaska Day 2006 [189528.602285] usb 2-1.4: USB disconnect, device number 12 [189528.790342] r8169 0000:01:00.0 eth0: link down [189528.790406] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [189528.811416] usb 2-1.4: new full-speed USB device number 13 using ehci-pci [189528.832739] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [189529.844549] wlan0: authenticate with c4:0a:cb:2d:81:b4 [189529.862084] wlan0: direct probe to c4:0a:cb:2d:81:b4 (try 1/3) [189530.064720] wlan0: direct probe to c4:0a:cb:2d:81:b4 (try 2/3) [189530.269015] wlan0: send auth to c4:0a:cb:2d:81:b4 (try 3/3) [189530.271097] wlan0: authenticated [189530.272978] wlan0: associate with c4:0a:cb:2d:81:b4 (try 1/3) [189530.277438] wlan0: RX AssocResp from c4:0a:cb:2d:81:b4 (capab=0x431 status=0 aid=6) [189530.277491] wlan0: associated [189530.277517] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [189530.277617] cfg80211: Calling CRDA for country: IN [189530.280128] ath: EEPROM regdomain: 0x8164 [189530.280131] ath: EEPROM indicates we should expect a country code [189530.280133] ath: doing EEPROM country->regdmn map search [189530.280134] ath: country maps to regdmn code: 0x5b [189530.280136] ath: Country alpha2 being used: IN [189530.280137] ath: Regpair used: 0x5b [189530.280139] ath: regdomain 0x8164 dynamically updated by country IE [189530.280160] cfg80211: Regulatory domain changed to country: IN [189530.280161] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [189530.280163] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [189530.280164] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [189530.280166] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [189530.280167] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [189533.911757] usb 2-1.4: New USB device found, idVendor=0cf3, idProduct=311d [189533.911765] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [189533.911769] usb 2-1.4: Product: Bluetooth USB Host Controller [189533.911772] usb 2-1.4: Manufacturer: Atheros Communications [189533.911775] usb 2-1.4: SerialNumber: Alaska Day 2006 [190246.260984] systemd-timedated[12809]: /etc/localtime should be a symbolic link to a timezone data file in /usr/share/zoneinfo/. [191342.672235] wlan0: deauthenticated from c4:0a:cb:2d:81:b4 (Reason: 2) [191342.722301] cfg80211: Calling CRDA to update world regulatory domain [191342.728802] cfg80211: World regulatory domain updated: [191342.728808] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [191342.728811] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [191342.728814] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [191342.728817] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [191342.728819] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [191342.728822] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [191348.895279] wlan0: authenticate with c4:0a:cb:2d:81:b4 [191348.919392] wlan0: direct probe to c4:0a:cb:2d:81:b4 (try 1/3) [191349.122398] wlan0: direct probe to c4:0a:cb:2d:81:b4 (try 2/3) [191349.326670] wlan0: send auth to c4:0a:cb:2d:81:b4 (try 3/3) [191349.329637] wlan0: authenticated [191349.330627] wlan0: associate with c4:0a:cb:2d:81:b4 (try 1/3) [191349.335329] wlan0: RX AssocResp from c4:0a:cb:2d:81:b4 (capab=0x431 status=0 aid=6) [191349.335408] wlan0: associated [191349.335552] cfg80211: Calling CRDA for country: IN [191349.340251] ath: EEPROM regdomain: 0x8164 [191349.340256] ath: EEPROM indicates we should expect a country code [191349.340259] ath: doing EEPROM country->regdmn map search [191349.340261] ath: country maps to regdmn code: 0x5b [191349.340264] ath: Country alpha2 being used: IN [191349.340265] ath: Regpair used: 0x5b [191349.340268] ath: regdomain 0x8164 dynamically updated by country IE [191349.340293] cfg80211: Regulatory domain changed to country: IN [191349.340294] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [191349.340297] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [191349.340300] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [191349.340302] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [191349.340304] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [192216.853274] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [192216.853293] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [192216.860142] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [192216.860148] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [192217.768669] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [192217.768673] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [192217.773832] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [192217.773838] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [192220.054976] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [192220.054983] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [192220.061195] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [192220.061200] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [192296.529862] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [192296.529872] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [192296.535746] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [192296.535752] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [192372.129957] wlan0: deauthenticating from c4:0a:cb:2d:81:b4 by local choice (reason=3) [192372.141912] cfg80211: Calling CRDA to update world regulatory domain [192372.147019] cfg80211: World regulatory domain updated: [192372.147022] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [192372.147025] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [192372.147027] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [192372.147029] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [192372.147031] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [192372.147033] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [192372.861817] PM: Syncing filesystems ... done. [192372.999473] PM: Preparing system for mem sleep [192372.999621] Freezing user space processes ... (elapsed 0.002 seconds) done. [192373.001692] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [192373.003010] PM: Entering mem sleep [192373.003077] Suspending console(s) (use no_console_suspend to debug) [192373.003320] sd 0:0:0:0: [sda] Synchronizing SCSI cache [192373.004382] sd 0:0:0:0: [sda] Stopping disk [192373.060426] mei_me 0000:00:16.0: H_RDY is not cleared 0x801A1A18 [192374.037035] PM: suspend of devices complete after 1032.664 msecs [192374.053050] PM: late suspend of devices complete after 15.993 msecs [192374.069092] r8169 0000:01:00.0: System wakeup enabled by ACPI [192374.085136] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [192374.101253] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [192374.133114] PM: noirq suspend of devices complete after 79.970 msecs [192374.133328] ACPI: Preparing to enter system sleep state S3 [192374.134575] PM: Saving platform NVS memory [192374.135334] Disabling non-boot CPUs ... [192374.136587] kvm: disabling virtualization on CPU1 [192374.237177] smpboot: CPU 1 is now offline [192374.238614] kvm: disabling virtualization on CPU2 [192374.341290] smpboot: CPU 2 is now offline [192374.342733] kvm: disabling virtualization on CPU3 [192374.445407] smpboot: CPU 3 is now offline [192374.446619] ACPI: Low-level resume complete [192374.446665] PM: Restoring platform NVS memory [192374.447170] Enabling non-boot CPUs ... [192374.447205] x86: Booting SMP configuration: [192374.447206] smpboot: Booting Node 0 Processor 1 APIC 0x1 [192374.474601] kvm: enabling virtualization on CPU1 [192374.476978] CPU1 is up [192374.476995] smpboot: Booting Node 0 Processor 2 APIC 0x2 [192374.488444] kvm: enabling virtualization on CPU2 [192374.490807] CPU2 is up [192374.490823] smpboot: Booting Node 0 Processor 3 APIC 0x3 [192374.502265] kvm: enabling virtualization on CPU3 [192374.504570] CPU3 is up [192374.507691] ACPI: Waking up from system sleep state S3 [192374.559012] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [192374.591031] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [192374.655378] PM: noirq resume of devices complete after 140.974 msecs [192374.655481] PM: early resume of devices complete after 0.081 msecs [192374.655521] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X [192374.656098] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [192374.659097] r8169 0000:01:00.0: System wakeup disabled by ACPI [192374.659193] ath: phy0: ASPM enabled: 0x43 [192374.871462] usb 2-1.3: reset high-speed USB device number 3 using ehci-pci [192375.003514] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [192375.005059] ata3.00: configured for UDMA/100 [192375.035682] usb 2-1.4: reset full-speed USB device number 13 using ehci-pci [192375.127906] usb 2-1.4: device firmware changed [192376.537589] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [192378.143097] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [192378.198301] ata1.00: configured for UDMA/100 [192378.223183] sd 0:0:0:0: [sda] Starting disk [192378.255486] PM: resume of devices complete after 3595.888 msecs [192378.255674] PM: Finishing wakeup. [192378.255727] r8169 0000:01:00.0: no hotplug settings from platform [192378.255806] ath9k 0000:02:00.0: no hotplug settings from platform [192378.255872] rtsx_pci 0000:03:00.0: no hotplug settings from platform [192378.256625] usb 2-1.4: USB disconnect, device number 13 [192378.255676] Restarting tasks ... done. [192378.287080] video LNXVIDEO:00: Restoring backlight state [192378.327357] usb 2-1.4: new full-speed USB device number 14 using ehci-pci [192378.421495] usb 2-1.4: New USB device found, idVendor=0cf3, idProduct=311d [192378.421503] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [192378.421507] usb 2-1.4: Product: Bluetooth USB Host Controller [192378.421510] usb 2-1.4: Manufacturer: Atheros Communications [192378.421512] usb 2-1.4: SerialNumber: Alaska Day 2006 [192378.506050] usb 2-1.4: USB disconnect, device number 14 [192378.707790] usb 2-1.4: new full-speed USB device number 15 using ehci-pci [192378.730725] r8169 0000:01:00.0 eth0: link down [192378.730789] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [192378.772917] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [192379.824695] wlan0: authenticate with b0:00:b4:20:69:34 [192379.842520] wlan0: direct probe to b0:00:b4:20:69:34 (try 1/3) [192380.045255] wlan0: direct probe to b0:00:b4:20:69:34 (try 2/3) [192380.249464] wlan0: send auth to b0:00:b4:20:69:34 (try 3/3) [192380.251387] wlan0: authenticated [192380.253509] wlan0: associate with b0:00:b4:20:69:34 (try 1/3) [192380.257052] wlan0: RX AssocResp from b0:00:b4:20:69:34 (capab=0x431 status=0 aid=5) [192380.257147] wlan0: associated [192380.257207] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [192380.257396] cfg80211: Calling CRDA for country: IN [192380.262407] ath: EEPROM regdomain: 0x8164 [192380.262413] ath: EEPROM indicates we should expect a country code [192380.262416] ath: doing EEPROM country->regdmn map search [192380.262418] ath: country maps to regdmn code: 0x5b [192380.262421] ath: Country alpha2 being used: IN [192380.262423] ath: Regpair used: 0x5b [192380.262426] ath: regdomain 0x8164 dynamically updated by country IE [192380.262451] cfg80211: Regulatory domain changed to country: IN [192380.262453] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [192380.262456] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [192380.262459] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [192380.262461] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [192380.262463] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [192383.807716] usb 2-1.4: New USB device found, idVendor=0cf3, idProduct=311d [192383.807723] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [192383.807727] usb 2-1.4: Product: Bluetooth USB Host Controller [192383.807731] usb 2-1.4: Manufacturer: Atheros Communications [192383.807733] usb 2-1.4: SerialNumber: Alaska Day 2006 [193177.391702] wlan0: authenticate with 2c:3e:cf:8f:4e:e4 [193177.409364] wlan0: send auth to 2c:3e:cf:8f:4e:e4 (try 1/3) [193177.409745] cfg80211: Calling CRDA to update world regulatory domain [193177.413302] wlan0: authenticated [193177.414278] cfg80211: World regulatory domain updated: [193177.414282] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [193177.414285] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [193177.414287] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [193177.414289] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [193177.414291] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [193177.414293] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [193177.416310] wlan0: associate with 2c:3e:cf:8f:4e:e4 (try 1/3) [193177.419889] wlan0: RX AssocResp from 2c:3e:cf:8f:4e:e4 (capab=0x431 status=0 aid=4) [193177.419964] wlan0: associated [193177.420071] cfg80211: Calling CRDA for country: IN [193177.422622] ath: EEPROM regdomain: 0x8164 [193177.422625] ath: EEPROM indicates we should expect a country code [193177.422627] ath: doing EEPROM country->regdmn map search [193177.422628] ath: country maps to regdmn code: 0x5b [193177.422630] ath: Country alpha2 being used: IN [193177.422631] ath: Regpair used: 0x5b [193177.422632] ath: regdomain 0x8164 dynamically updated by country IE [193177.422653] cfg80211: Regulatory domain changed to country: IN [193177.422655] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [193177.422657] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [193177.422658] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [193177.422660] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [193177.422661] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [194989.847656] wlan0: deauthenticated from 2c:3e:cf:8f:4e:e4 (Reason: 2) [194989.885520] cfg80211: Calling CRDA to update world regulatory domain [194989.941225] cfg80211: World regulatory domain updated: [194989.941231] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [194989.941235] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [194989.941238] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [194989.941241] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [194989.941243] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [194989.941245] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [194990.152067] wlan0: authenticate with b0:00:b4:20:69:34 [194990.169734] wlan0: send auth to b0:00:b4:20:69:34 (try 1/3) [194990.171651] wlan0: authenticated [194990.174725] wlan0: associate with b0:00:b4:20:69:34 (try 1/3) [194990.180477] wlan0: RX AssocResp from b0:00:b4:20:69:34 (capab=0x431 status=0 aid=3) [194990.180555] wlan0: associated [194990.180632] cfg80211: Calling CRDA for country: IN [194990.183238] ath: EEPROM regdomain: 0x8164 [194990.183242] ath: EEPROM indicates we should expect a country code [194990.183243] ath: doing EEPROM country->regdmn map search [194990.183245] ath: country maps to regdmn code: 0x5b [194990.183247] ath: Country alpha2 being used: IN [194990.183248] ath: Regpair used: 0x5b [194990.183250] ath: regdomain 0x8164 dynamically updated by country IE [194990.183271] cfg80211: Regulatory domain changed to country: IN [194990.183273] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [194990.183275] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [194990.183277] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [194990.183278] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [194990.183280] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [196302.171193] ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root [196803.053531] wlan0: deauthenticated from b0:00:b4:20:69:34 (Reason: 2) [196803.091860] cfg80211: Calling CRDA to update world regulatory domain [196803.156295] cfg80211: World regulatory domain updated: [196803.156301] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [196803.156305] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [196803.156308] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [196803.156310] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [196803.156313] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [196803.156315] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [196803.366085] wlan0: authenticate with 2c:3e:cf:8f:48:34 [196803.384000] wlan0: direct probe to 2c:3e:cf:8f:48:34 (try 1/3) [196803.585952] wlan0: direct probe to 2c:3e:cf:8f:48:34 (try 2/3) [196803.790208] wlan0: direct probe to 2c:3e:cf:8f:48:34 (try 3/3) [196803.994407] wlan0: authentication with 2c:3e:cf:8f:48:34 timed out [196804.299069] wlan0: authenticate with b0:00:b4:20:63:a4 [196804.317054] wlan0: send auth to b0:00:b4:20:63:a4 (try 1/3) [196804.321543] wlan0: authenticated [196804.322796] wlan0: associate with b0:00:b4:20:63:a4 (try 1/3) [196804.327548] wlan0: RX AssocResp from b0:00:b4:20:63:a4 (capab=0x431 status=0 aid=1) [196804.327602] wlan0: associated [196804.327658] cfg80211: Calling CRDA for country: IN [196804.329775] ath: EEPROM regdomain: 0x8164 [196804.329778] ath: EEPROM indicates we should expect a country code [196804.329779] ath: doing EEPROM country->regdmn map search [196804.329780] ath: country maps to regdmn code: 0x5b [196804.329782] ath: Country alpha2 being used: IN [196804.329782] ath: Regpair used: 0x5b [196804.329784] ath: regdomain 0x8164 dynamically updated by country IE [196804.329805] cfg80211: Regulatory domain changed to country: IN [196804.329806] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [196804.329807] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [196804.329808] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [196804.329809] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [196804.329811] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [197741.929137] wlan0: authenticate with c4:0a:cb:5c:03:24 [197741.946844] wlan0: direct probe to c4:0a:cb:5c:03:24 (try 1/3) [197741.947149] cfg80211: Calling CRDA to update world regulatory domain [197742.038234] cfg80211: World regulatory domain updated: [197742.038240] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [197742.038244] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [197742.038247] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [197742.038249] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [197742.038252] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [197742.038254] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [197742.149903] wlan0: direct probe to c4:0a:cb:5c:03:24 (try 2/3) [197742.354150] wlan0: direct probe to c4:0a:cb:5c:03:24 (try 3/3) [197742.558382] wlan0: authentication with c4:0a:cb:5c:03:24 timed out [197742.744070] wlan0: authenticate with b0:00:b4:20:63:a4 [197742.767900] wlan0: send auth to b0:00:b4:20:63:a4 (try 1/3) [197742.772843] wlan0: authenticated [197742.774626] wlan0: associate with b0:00:b4:20:63:a4 (try 1/3) [197742.781370] wlan0: RX AssocResp from b0:00:b4:20:63:a4 (capab=0x431 status=0 aid=1) [197742.781449] wlan0: associated [197742.781601] cfg80211: Calling CRDA for country: IN [197742.785487] ath: EEPROM regdomain: 0x8164 [197742.785492] ath: EEPROM indicates we should expect a country code [197742.785494] ath: doing EEPROM country->regdmn map search [197742.785497] ath: country maps to regdmn code: 0x5b [197742.785499] ath: Country alpha2 being used: IN [197742.785501] ath: Regpair used: 0x5b [197742.785504] ath: regdomain 0x8164 dynamically updated by country IE [197742.785529] cfg80211: Regulatory domain changed to country: IN [197742.785531] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [197742.785534] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [197742.785536] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [197742.785539] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [197742.785541] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [197853.397061] ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root [198285.558900] ath: phy0: Failed to stop TX DMA, queues=0x001! [199555.472995] wlan0: deauthenticated from b0:00:b4:20:63:a4 (Reason: 2) [199555.519612] cfg80211: Calling CRDA to update world regulatory domain [199555.527437] cfg80211: World regulatory domain updated: [199555.527443] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [199555.527446] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [199555.527449] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [199555.527452] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [199555.527454] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [199555.527457] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [199555.734611] wlan0: authenticate with c4:0a:cb:2d:84:04 [199555.752599] wlan0: direct probe to c4:0a:cb:2d:84:04 (try 1/3) [199555.953540] wlan0: direct probe to c4:0a:cb:2d:84:04 (try 2/3) [199556.157774] wlan0: direct probe to c4:0a:cb:2d:84:04 (try 3/3) [199556.362006] wlan0: authentication with c4:0a:cb:2d:84:04 timed out [199557.437690] wlan0: authenticate with c4:0a:cb:2d:84:e4 [199557.460564] wlan0: send auth to c4:0a:cb:2d:84:e4 (try 1/3) [199557.463587] wlan0: authenticated [199557.467283] wlan0: associate with c4:0a:cb:2d:84:e4 (try 1/3) [199557.575371] wlan0: associate with c4:0a:cb:2d:84:e4 (try 2/3) [199557.581782] wlan0: RX AssocResp from c4:0a:cb:2d:84:e4 (capab=0x431 status=0 aid=1) [199557.581851] wlan0: associated [199557.581951] cfg80211: Calling CRDA for country: IN [199557.586738] ath: EEPROM regdomain: 0x8164 [199557.586743] ath: EEPROM indicates we should expect a country code [199557.586745] ath: doing EEPROM country->regdmn map search [199557.586747] ath: country maps to regdmn code: 0x5b [199557.586750] ath: Country alpha2 being used: IN [199557.586752] ath: Regpair used: 0x5b [199557.586755] ath: regdomain 0x8164 dynamically updated by country IE [199557.586793] cfg80211: Regulatory domain changed to country: IN [199557.586795] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [199557.586798] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [199557.586800] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [199557.586802] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [199557.586805] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [199560.675939] wlan0: deauthenticated from c4:0a:cb:2d:84:e4 (Reason: 15) [199560.718589] cfg80211: Calling CRDA to update world regulatory domain [199560.724201] cfg80211: World regulatory domain updated: [199560.724204] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [199560.724205] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [199560.724207] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [199560.724208] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [199560.724209] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [199560.724210] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [199562.110948] systemd-hostnamed[15018]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [199566.839193] wlan0: authenticate with 2c:3e:cf:8f:4e:e4 [199566.863229] wlan0: send auth to 2c:3e:cf:8f:4e:e4 (try 1/3) [199566.866000] wlan0: authenticated [199566.869968] wlan0: associate with 2c:3e:cf:8f:4e:e4 (try 1/3) [199566.877980] wlan0: RX AssocResp from 2c:3e:cf:8f:4e:e4 (capab=0x431 status=0 aid=12) [199566.878042] wlan0: associated [199566.878185] cfg80211: Calling CRDA for country: IN [199566.882231] ath: EEPROM regdomain: 0x8164 [199566.882235] ath: EEPROM indicates we should expect a country code [199566.882237] ath: doing EEPROM country->regdmn map search [199566.882239] ath: country maps to regdmn code: 0x5b [199566.882241] ath: Country alpha2 being used: IN [199566.882242] ath: Regpair used: 0x5b [199566.882245] ath: regdomain 0x8164 dynamically updated by country IE [199566.882270] cfg80211: Regulatory domain changed to country: IN [199566.882272] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [199566.882274] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [199566.882276] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [199566.882278] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [199566.882280] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [200196.713324] wlan0: authenticate with b0:00:b4:20:69:34 [200196.731001] wlan0: send auth to b0:00:b4:20:69:34 (try 1/3) [200196.732871] cfg80211: Calling CRDA to update world regulatory domain [200196.735722] wlan0: authenticated [200196.736233] cfg80211: World regulatory domain updated: [200196.736236] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [200196.736239] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [200196.736242] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [200196.736244] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [200196.736246] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [200196.736248] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [200196.737535] wlan0: associate with b0:00:b4:20:69:34 (try 1/3) [200196.741079] wlan0: RX AssocResp from b0:00:b4:20:69:34 (capab=0x431 status=0 aid=3) [200196.741141] wlan0: associated [200196.741193] cfg80211: Calling CRDA for country: IN [200196.743522] ath: EEPROM regdomain: 0x8164 [200196.743525] ath: EEPROM indicates we should expect a country code [200196.743526] ath: doing EEPROM country->regdmn map search [200196.743528] ath: country maps to regdmn code: 0x5b [200196.743529] ath: Country alpha2 being used: IN [200196.743530] ath: Regpair used: 0x5b [200196.743532] ath: regdomain 0x8164 dynamically updated by country IE [200196.743553] cfg80211: Regulatory domain changed to country: IN [200196.743554] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [200196.743555] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [200196.743556] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [200196.743558] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [200196.743559] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [200239.505992] cfg80211: Calling CRDA to update world regulatory domain [200239.513619] cfg80211: World regulatory domain updated: [200239.513624] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [200239.513628] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [200239.513631] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [200239.513633] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [200239.513636] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [200239.513638] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [200254.829401] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [200400.172524] ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root [200637.850224] wlan0: authenticate with b0:00:b4:20:63:a4 [200637.874849] wlan0: direct probe to b0:00:b4:20:63:a4 (try 1/3) [200638.077624] wlan0: direct probe to b0:00:b4:20:63:a4 (try 2/3) [200638.281881] wlan0: send auth to b0:00:b4:20:63:a4 (try 3/3) [200638.285608] wlan0: authenticated [200638.289855] wlan0: associate with b0:00:b4:20:63:a4 (try 1/3) [200638.300628] wlan0: RX AssocResp from b0:00:b4:20:63:a4 (capab=0x431 status=0 aid=17) [200638.300707] wlan0: associated [200638.300756] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [200638.300911] cfg80211: Calling CRDA for country: IN [200638.306860] ath: EEPROM regdomain: 0x8164 [200638.306868] ath: EEPROM indicates we should expect a country code [200638.306872] ath: doing EEPROM country->regdmn map search [200638.306876] ath: country maps to regdmn code: 0x5b [200638.306880] ath: Country alpha2 being used: IN [200638.306881] ath: Regpair used: 0x5b [200638.306885] ath: regdomain 0x8164 dynamically updated by country IE [200638.306913] cfg80211: Regulatory domain changed to country: IN [200638.306916] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [200638.306920] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [200638.306923] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [200638.306925] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [200638.306928] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [200683.303762] wlan0: authenticate with c4:0a:cb:2d:84:e4 [200683.321426] wlan0: direct probe to c4:0a:cb:2d:84:e4 (try 1/3) [200683.321512] cfg80211: Calling CRDA to update world regulatory domain [200683.327652] cfg80211: World regulatory domain updated: [200683.327655] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [200683.327657] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [200683.327659] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [200683.327660] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [200683.327661] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [200683.327662] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [200683.522395] wlan0: direct probe to c4:0a:cb:2d:84:e4 (try 2/3) [200683.726619] wlan0: send auth to c4:0a:cb:2d:84:e4 (try 3/3) [200683.742978] wlan0: authenticated [200683.746667] wlan0: associate with c4:0a:cb:2d:84:e4 (try 1/3) [200683.753031] wlan0: RX AssocResp from c4:0a:cb:2d:84:e4 (capab=0x431 status=0 aid=2) [200683.753102] wlan0: associated [200683.753396] cfg80211: Calling CRDA for country: IN [200683.756117] ath: EEPROM regdomain: 0x8164 [200683.756120] ath: EEPROM indicates we should expect a country code [200683.756121] ath: doing EEPROM country->regdmn map search [200683.756122] ath: country maps to regdmn code: 0x5b [200683.756124] ath: Country alpha2 being used: IN [200683.756125] ath: Regpair used: 0x5b [200683.756126] ath: regdomain 0x8164 dynamically updated by country IE [200683.756147] cfg80211: Regulatory domain changed to country: IN [200683.756148] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [200683.756150] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [200683.756151] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [200683.756152] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [200683.756153] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [200691.767379] cfg80211: Calling CRDA to update world regulatory domain [200691.774709] cfg80211: World regulatory domain updated: [200691.774712] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [200691.774714] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [200691.774715] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [200691.774716] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [200691.774718] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [200691.774719] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [200691.986422] wlan0: authenticate with c4:0a:cb:5c:10:e4 [200692.012301] wlan0: send auth to c4:0a:cb:5c:10:e4 (try 1/3) [200692.194093] wlan0: authenticated [200692.196296] wlan0: associate with c4:0a:cb:5c:10:e4 (try 1/3) [200692.201958] wlan0: RX AssocResp from c4:0a:cb:5c:10:e4 (capab=0x431 status=0 aid=13) [200692.202035] wlan0: associated [200692.202203] cfg80211: Calling CRDA for country: IN [200692.206066] ath: EEPROM regdomain: 0x8164 [200692.206072] ath: EEPROM indicates we should expect a country code [200692.206075] ath: doing EEPROM country->regdmn map search [200692.206077] ath: country maps to regdmn code: 0x5b [200692.206080] ath: Country alpha2 being used: IN [200692.206082] ath: Regpair used: 0x5b [200692.206084] ath: regdomain 0x8164 dynamically updated by country IE [200692.206110] cfg80211: Regulatory domain changed to country: IN [200692.206112] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [200692.206115] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [200692.206118] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [200692.206120] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [200692.206122] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [200726.335983] wlan0: authenticate with c4:0a:cb:2d:84:04 [200726.353630] wlan0: direct probe to c4:0a:cb:2d:84:04 (try 1/3) [200726.353892] cfg80211: Calling CRDA to update world regulatory domain [200726.356495] cfg80211: World regulatory domain updated: [200726.356498] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [200726.356500] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [200726.356501] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [200726.356502] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [200726.356504] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [200726.356505] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [200726.555474] wlan0: send auth to c4:0a:cb:2d:84:04 (try 2/3) [200726.562689] wlan0: authenticated [200726.563522] wlan0: associate with c4:0a:cb:2d:84:04 (try 1/3) [200726.576269] wlan0: RX AssocResp from c4:0a:cb:2d:84:04 (capab=0x431 status=0 aid=3) [200726.576342] wlan0: associated [200726.576479] cfg80211: Calling CRDA for country: IN [200726.580915] ath: EEPROM regdomain: 0x8164 [200726.580920] ath: EEPROM indicates we should expect a country code [200726.580923] ath: doing EEPROM country->regdmn map search [200726.580925] ath: country maps to regdmn code: 0x5b [200726.580927] ath: Country alpha2 being used: IN [200726.580929] ath: Regpair used: 0x5b [200726.580932] ath: regdomain 0x8164 dynamically updated by country IE [200726.580957] cfg80211: Regulatory domain changed to country: IN [200726.580959] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [200726.580962] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [200726.580964] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [200726.580967] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [200726.580969] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [200731.598773] wlan0: deauthenticated from c4:0a:cb:2d:84:04 (Reason: 3) [200731.628797] cfg80211: Calling CRDA to update world regulatory domain [200731.635726] cfg80211: World regulatory domain updated: [200731.635732] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [200731.635737] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [200731.635741] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [200731.635745] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [200731.635748] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [200731.635751] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [200731.899027] wlan0: authenticate with c4:0a:cb:5c:10:e4 [200731.923043] wlan0: send auth to c4:0a:cb:5c:10:e4 (try 1/3) [200731.932078] wlan0: authenticated [200731.933625] wlan0: associate with c4:0a:cb:5c:10:e4 (try 1/3) [200731.949721] wlan0: RX AssocResp from c4:0a:cb:5c:10:e4 (capab=0x431 status=0 aid=13) [200731.949802] wlan0: associated [200731.949905] cfg80211: Calling CRDA for country: IN [200731.953438] ath: EEPROM regdomain: 0x8164 [200731.953443] ath: EEPROM indicates we should expect a country code [200731.953446] ath: doing EEPROM country->regdmn map search [200731.953448] ath: country maps to regdmn code: 0x5b [200731.953451] ath: Country alpha2 being used: IN [200731.953452] ath: Regpair used: 0x5b [200731.953455] ath: regdomain 0x8164 dynamically updated by country IE [200731.953480] cfg80211: Regulatory domain changed to country: IN [200731.953482] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [200731.953485] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [200731.953488] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [200731.953490] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [200731.953493] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [200774.861724] cfg80211: Calling CRDA to update world regulatory domain [200774.868760] cfg80211: World regulatory domain updated: [200774.868765] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [200774.868768] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [200774.868771] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [200774.868774] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [200774.868776] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [200774.868779] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [200790.338010] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [201109.728848] ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root [201173.399206] wlan0: authenticate with c4:0a:cb:2d:af:06 [201173.423207] wlan0: send auth to c4:0a:cb:2d:af:06 (try 1/3) [201173.425175] wlan0: authenticated [201173.425922] wlan0: associate with c4:0a:cb:2d:af:06 (try 1/3) [201173.429945] wlan0: RX AssocResp from c4:0a:cb:2d:af:06 (capab=0x431 status=0 aid=4) [201173.430025] wlan0: associated [201173.430082] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [201173.430195] cfg80211: Calling CRDA for country: IN [201173.434525] ath: EEPROM regdomain: 0x8164 [201173.434528] ath: EEPROM indicates we should expect a country code [201173.434530] ath: doing EEPROM country->regdmn map search [201173.434532] ath: country maps to regdmn code: 0x5b [201173.434534] ath: Country alpha2 being used: IN [201173.434536] ath: Regpair used: 0x5b [201173.434538] ath: regdomain 0x8164 dynamically updated by country IE [201173.434561] cfg80211: Regulatory domain changed to country: IN [201173.434563] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [201173.434565] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [201173.434568] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [201173.434570] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [201173.434572] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [201218.866424] wlan0: authenticate with c4:0a:cb:25:b5:56 [201218.883944] wlan0: direct probe to c4:0a:cb:25:b5:56 (try 1/3) [201218.884129] cfg80211: Calling CRDA to update world regulatory domain [201218.888923] cfg80211: World regulatory domain updated: [201218.888926] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [201218.888927] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [201218.888929] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [201218.888930] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [201218.888931] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [201218.888932] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [201219.087008] wlan0: send auth to c4:0a:cb:25:b5:56 (try 2/3) [201219.089054] wlan0: authenticated [201219.091015] wlan0: associate with c4:0a:cb:25:b5:56 (try 1/3) [201219.098272] wlan0: RX AssocResp from c4:0a:cb:25:b5:56 (capab=0x431 status=0 aid=4) [201219.098352] wlan0: associated [201219.098688] cfg80211: Calling CRDA for country: IN [201219.102587] ath: EEPROM regdomain: 0x8164 [201219.102593] ath: EEPROM indicates we should expect a country code [201219.102595] ath: doing EEPROM country->regdmn map search [201219.102598] ath: country maps to regdmn code: 0x5b [201219.102600] ath: Country alpha2 being used: IN [201219.102602] ath: Regpair used: 0x5b [201219.102605] ath: regdomain 0x8164 dynamically updated by country IE [201219.102629] cfg80211: Regulatory domain changed to country: IN [201219.102631] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [201219.102634] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [201219.102636] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [201219.102639] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [201219.102641] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [203031.488324] wlan0: deauthenticated from c4:0a:cb:25:b5:56 (Reason: 2) [203031.512229] cfg80211: Calling CRDA to update world regulatory domain [203031.594837] cfg80211: World regulatory domain updated: [203031.594840] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [203031.594842] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [203031.594844] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [203031.594845] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [203031.594846] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [203031.594847] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [203031.793873] wlan0: authenticate with c4:0a:cb:2d:af:06 [203031.818557] wlan0: direct probe to c4:0a:cb:2d:af:06 (try 1/3) [203032.021663] wlan0: direct probe to c4:0a:cb:2d:af:06 (try 2/3) [203032.225866] wlan0: direct probe to c4:0a:cb:2d:af:06 (try 3/3) [203032.430093] wlan0: authentication with c4:0a:cb:2d:af:06 timed out [203032.731245] wlan0: authenticate with c4:0a:cb:25:f6:a6 [203032.748964] wlan0: send auth to c4:0a:cb:25:f6:a6 (try 1/3) [203032.753857] wlan0: authenticated [203032.754415] wlan0: associate with c4:0a:cb:25:f6:a6 (try 1/3) [203032.758039] wlan0: RX AssocResp from c4:0a:cb:25:f6:a6 (capab=0x431 status=0 aid=5) [203032.758104] wlan0: associated [203032.758197] cfg80211: Calling CRDA for country: IN [203032.761847] ath: EEPROM regdomain: 0x8164 [203032.761851] ath: EEPROM indicates we should expect a country code [203032.761854] ath: doing EEPROM country->regdmn map search [203032.761856] ath: country maps to regdmn code: 0x5b [203032.761858] ath: Country alpha2 being used: IN [203032.761860] ath: Regpair used: 0x5b [203032.761863] ath: regdomain 0x8164 dynamically updated by country IE [203032.761888] cfg80211: Regulatory domain changed to country: IN [203032.761890] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [203032.761893] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [203032.761896] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [203032.761898] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [203032.761900] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [203193.116977] wlan0: authenticate with c4:0a:cb:25:ce:66 [203193.134683] wlan0: direct probe to c4:0a:cb:25:ce:66 (try 1/3) [203193.141528] cfg80211: Calling CRDA to update world regulatory domain [203193.143780] cfg80211: World regulatory domain updated: [203193.143783] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [203193.143785] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [203193.143786] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [203193.143787] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [203193.143789] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [203193.143790] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [203193.337866] wlan0: direct probe to c4:0a:cb:25:ce:66 (try 2/3) [203193.542138] wlan0: send auth to c4:0a:cb:25:ce:66 (try 3/3) [203193.546748] wlan0: authenticated [203193.550114] wlan0: associate with c4:0a:cb:25:ce:66 (try 1/3) [203193.553786] wlan0: RX AssocResp from c4:0a:cb:25:ce:66 (capab=0x431 status=0 aid=3) [203193.553857] wlan0: associated [203193.553950] cfg80211: Calling CRDA for country: IN [203193.557651] ath: EEPROM regdomain: 0x8164 [203193.557656] ath: EEPROM indicates we should expect a country code [203193.557658] ath: doing EEPROM country->regdmn map search [203193.557660] ath: country maps to regdmn code: 0x5b [203193.557663] ath: Country alpha2 being used: IN [203193.557665] ath: Regpair used: 0x5b [203193.557667] ath: regdomain 0x8164 dynamically updated by country IE [203193.557693] cfg80211: Regulatory domain changed to country: IN [203193.557695] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [203193.557698] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [203193.557701] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [203193.557703] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [203193.557705] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [203290.220110] cfg80211: Calling CRDA to update world regulatory domain [203290.225814] cfg80211: World regulatory domain updated: [203290.225818] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [203290.225820] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [203290.225822] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [203290.225824] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [203290.225825] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [203290.225827] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [203290.377186] wlan0: authenticate with c4:0a:cb:25:b5:56 [203290.401828] wlan0: direct probe to c4:0a:cb:25:b5:56 (try 1/3) [203290.604948] wlan0: direct probe to c4:0a:cb:25:b5:56 (try 2/3) [203290.809212] wlan0: direct probe to c4:0a:cb:25:b5:56 (try 3/3) [203291.013432] wlan0: authentication with c4:0a:cb:25:b5:56 timed out [203292.162575] wlan0: authenticate with c4:0a:cb:25:f6:a6 [203292.180458] wlan0: send auth to c4:0a:cb:25:f6:a6 (try 1/3) [203292.183423] wlan0: authenticated [203292.186731] wlan0: associate with c4:0a:cb:25:f6:a6 (try 1/3) [203292.190448] wlan0: RX AssocResp from c4:0a:cb:25:f6:a6 (capab=0x431 status=0 aid=5) [203292.190506] wlan0: associated [203292.190572] cfg80211: Calling CRDA for country: IN [203292.193927] ath: EEPROM regdomain: 0x8164 [203292.193933] ath: EEPROM indicates we should expect a country code [203292.193936] ath: doing EEPROM country->regdmn map search [203292.193938] ath: country maps to regdmn code: 0x5b [203292.193940] ath: Country alpha2 being used: IN [203292.193942] ath: Regpair used: 0x5b [203292.193945] ath: regdomain 0x8164 dynamically updated by country IE [203292.193970] cfg80211: Regulatory domain changed to country: IN [203292.193971] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [203292.193974] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [203292.193977] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [203292.193979] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [203292.193981] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [204686.689432] ath: phy0: Failed to stop TX DMA, queues=0x005! [204686.703592] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [204686.703637] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [205104.492165] wlan0: deauthenticated from c4:0a:cb:25:f6:a6 (Reason: 2) [205104.521409] cfg80211: Calling CRDA to update world regulatory domain [205104.608252] cfg80211: World regulatory domain updated: [205104.608261] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [205104.608267] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [205104.608272] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [205104.608277] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [205104.608281] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [205104.608285] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [205104.738300] wlan0: authenticate with c4:0a:cb:2d:af:06 [205104.762283] wlan0: direct probe to c4:0a:cb:2d:af:06 (try 1/3) [205104.965259] wlan0: direct probe to c4:0a:cb:2d:af:06 (try 2/3) [205105.169492] wlan0: direct probe to c4:0a:cb:2d:af:06 (try 3/3) [205105.373726] wlan0: authentication with c4:0a:cb:2d:af:06 timed out [205105.623740] wlan0: authenticate with c4:0a:cb:25:ce:66 [205105.641768] wlan0: send auth to c4:0a:cb:25:ce:66 (try 1/3) [205105.653603] wlan0: authenticated [205105.658001] wlan0: associate with c4:0a:cb:25:ce:66 (try 1/3) [205105.665923] wlan0: RX AssocResp from c4:0a:cb:25:ce:66 (capab=0x431 status=0 aid=1) [205105.666033] wlan0: associated [205105.666229] cfg80211: Calling CRDA for country: IN [205105.670688] ath: EEPROM regdomain: 0x8164 [205105.670693] ath: EEPROM indicates we should expect a country code [205105.670696] ath: doing EEPROM country->regdmn map search [205105.670698] ath: country maps to regdmn code: 0x5b [205105.670701] ath: Country alpha2 being used: IN [205105.670702] ath: Regpair used: 0x5b [205105.670705] ath: regdomain 0x8164 dynamically updated by country IE [205105.670731] cfg80211: Regulatory domain changed to country: IN [205105.670733] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [205105.670736] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [205105.670738] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [205105.670740] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [205105.670743] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [205552.990821] ath: phy0: Failed to stop TX DMA, queues=0x004! [205838.363245] ath: phy0: Failed to stop TX DMA, queues=0x001! [205838.500290] wlan0: authenticate with c4:0a:cb:2d:95:a6 [205838.518229] wlan0: direct probe to c4:0a:cb:2d:95:a6 (try 1/3) [205838.518544] cfg80211: Calling CRDA to update world regulatory domain [205838.523876] cfg80211: World regulatory domain updated: [205838.523879] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [205838.523881] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [205838.523883] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [205838.523884] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [205838.523885] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [205838.523886] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [205838.719282] wlan0: direct probe to c4:0a:cb:2d:95:a6 (try 2/3) [205838.923559] wlan0: send auth to c4:0a:cb:2d:95:a6 (try 3/3) [205838.925581] wlan0: authenticated [205838.927496] wlan0: associate with c4:0a:cb:2d:95:a6 (try 1/3) [205838.931246] wlan0: RX AssocResp from c4:0a:cb:2d:95:a6 (capab=0x431 status=0 aid=1) [205838.931360] wlan0: associated [205838.931611] cfg80211: Calling CRDA for country: IN [205838.935788] ath: EEPROM regdomain: 0x8164 [205838.935794] ath: EEPROM indicates we should expect a country code [205838.935796] ath: doing EEPROM country->regdmn map search [205838.935798] ath: country maps to regdmn code: 0x5b [205838.935801] ath: Country alpha2 being used: IN [205838.935803] ath: Regpair used: 0x5b [205838.935806] ath: regdomain 0x8164 dynamically updated by country IE [205838.935830] cfg80211: Regulatory domain changed to country: IN [205838.935832] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [205838.935836] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [205838.935838] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [205838.935840] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [205838.935843] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [205843.632265] cfg80211: Calling CRDA to update world regulatory domain [205843.638696] cfg80211: World regulatory domain updated: [205843.638700] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [205843.638702] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [205843.638704] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [205843.638706] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [205843.638708] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [205843.638709] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [205843.853768] wlan0: authenticate with c4:0a:cb:25:ce:66 [205843.871767] wlan0: send auth to c4:0a:cb:25:ce:66 (try 1/3) [205843.874875] wlan0: authenticated [205843.877130] wlan0: associate with c4:0a:cb:25:ce:66 (try 1/3) [205843.886226] wlan0: RX AssocResp from c4:0a:cb:25:ce:66 (capab=0x431 status=0 aid=1) [205843.886300] wlan0: associated [205843.886420] cfg80211: Calling CRDA for country: IN [205843.889061] ath: EEPROM regdomain: 0x8164 [205843.889064] ath: EEPROM indicates we should expect a country code [205843.889066] ath: doing EEPROM country->regdmn map search [205843.889067] ath: country maps to regdmn code: 0x5b [205843.889068] ath: Country alpha2 being used: IN [205843.889069] ath: Regpair used: 0x5b [205843.889070] ath: regdomain 0x8164 dynamically updated by country IE [205843.889091] cfg80211: Regulatory domain changed to country: IN [205843.889092] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [205843.889094] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [205843.889095] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [205843.889096] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [205843.889097] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [205901.033298] ath: phy0: Failed to stop TX DMA, queues=0x004! [205957.348462] ath: phy0: Failed to stop TX DMA, queues=0x001! [205984.626841] ath: phy0: Failed to stop TX DMA, queues=0x005! [206248.296171] ath: phy0: Failed to stop TX DMA, queues=0x005! [206306.415900] ath: phy0: Failed to stop TX DMA, queues=0x005! [206440.411721] ath: phy0: Failed to stop TX DMA, queues=0x004! [206676.365983] ath: phy0: Failed to stop TX DMA, queues=0x001! [206677.035671] ath: phy0: Failed to stop TX DMA, queues=0x001! [206678.436101] ath: phy0: Failed to stop TX DMA, queues=0x005! [206921.455036] ath: phy0: Failed to stop TX DMA, queues=0x005! [207656.238569] wlan0: deauthenticated from c4:0a:cb:25:ce:66 (Reason: 2) [207656.274230] cfg80211: Calling CRDA to update world regulatory domain [207656.280836] cfg80211: World regulatory domain updated: [207656.280841] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [207656.280843] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [207656.280846] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [207656.280848] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [207656.280850] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [207656.280852] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [207657.314330] wlan0: authenticate with c4:0a:cb:25:b5:56 [207657.337408] wlan0: send auth to c4:0a:cb:25:b5:56 (try 1/3) [207657.343312] wlan0: authenticated [207657.344430] wlan0: associate with c4:0a:cb:25:b5:56 (try 1/3) [207657.365391] wlan0: RX AssocResp from c4:0a:cb:25:b5:56 (capab=0x431 status=0 aid=11) [207657.365446] wlan0: associated [207657.365522] cfg80211: Calling CRDA for country: IN [207657.369109] ath: EEPROM regdomain: 0x8164 [207657.369115] ath: EEPROM indicates we should expect a country code [207657.369117] ath: doing EEPROM country->regdmn map search [207657.369119] ath: country maps to regdmn code: 0x5b [207657.369122] ath: Country alpha2 being used: IN [207657.369124] ath: Regpair used: 0x5b [207657.369126] ath: regdomain 0x8164 dynamically updated by country IE [207657.369151] cfg80211: Regulatory domain changed to country: IN [207657.369153] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [207657.369156] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [207657.369158] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [207657.369160] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [207657.369163] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [208238.886410] wlan0: authenticate with c4:0a:cb:25:f6:a6 [208238.904171] wlan0: direct probe to c4:0a:cb:25:f6:a6 (try 1/3) [208238.904245] cfg80211: Calling CRDA to update world regulatory domain [208238.906944] cfg80211: World regulatory domain updated: [208238.906947] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [208238.906950] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [208238.906952] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [208238.906954] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [208238.906955] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [208238.906957] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [208239.104852] wlan0: direct probe to c4:0a:cb:25:f6:a6 (try 2/3) [208239.309116] wlan0: send auth to c4:0a:cb:25:f6:a6 (try 3/3) [208239.311137] wlan0: authenticated [208239.313109] wlan0: associate with c4:0a:cb:25:f6:a6 (try 1/3) [208239.320877] wlan0: RX AssocResp from c4:0a:cb:25:f6:a6 (capab=0x431 status=0 aid=1) [208239.320950] wlan0: associated [208239.321125] cfg80211: Calling CRDA for country: IN [208239.325339] ath: EEPROM regdomain: 0x8164 [208239.325347] ath: EEPROM indicates we should expect a country code [208239.325350] ath: doing EEPROM country->regdmn map search [208239.325354] ath: country maps to regdmn code: 0x5b [208239.325358] ath: Country alpha2 being used: IN [208239.325361] ath: Regpair used: 0x5b [208239.325366] ath: regdomain 0x8164 dynamically updated by country IE [208239.325393] cfg80211: Regulatory domain changed to country: IN [208239.325396] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [208239.325401] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [208239.325405] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [208239.325410] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [208239.325414] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [208359.936911] wlan0: authenticate with c4:0a:cb:25:b5:56 [208359.954467] wlan0: direct probe to c4:0a:cb:25:b5:56 (try 1/3) [208359.954637] cfg80211: Calling CRDA to update world regulatory domain [208359.957091] cfg80211: World regulatory domain updated: [208359.957093] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [208359.957094] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [208359.957096] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [208359.957097] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [208359.957098] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [208359.957099] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [208360.155154] wlan0: direct probe to c4:0a:cb:25:b5:56 (try 2/3) [208360.359365] wlan0: direct probe to c4:0a:cb:25:b5:56 (try 3/3) [208360.563563] wlan0: authentication with c4:0a:cb:25:b5:56 timed out [208360.813495] wlan0: authenticate with c4:0a:cb:25:f6:a6 [208360.837189] wlan0: send auth to c4:0a:cb:25:f6:a6 (try 1/3) [208360.873233] wlan0: authenticated [208360.875976] wlan0: associate with c4:0a:cb:25:f6:a6 (try 1/3) [208360.909789] wlan0: RX AssocResp from c4:0a:cb:25:f6:a6 (capab=0x431 status=0 aid=1) [208360.909864] wlan0: associated [208360.909986] cfg80211: Calling CRDA for country: IN [208360.914221] ath: EEPROM regdomain: 0x8164 [208360.914228] ath: EEPROM indicates we should expect a country code [208360.914231] ath: doing EEPROM country->regdmn map search [208360.914234] ath: country maps to regdmn code: 0x5b [208360.914237] ath: Country alpha2 being used: IN [208360.914240] ath: Regpair used: 0x5b [208360.914244] ath: regdomain 0x8164 dynamically updated by country IE [208360.914272] cfg80211: Regulatory domain changed to country: IN [208360.914275] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [208360.914280] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [208360.914284] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [208360.914287] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [208360.914290] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [208839.591976] wlan0: authenticate with c4:0a:cb:2d:af:06 [208839.609577] wlan0: direct probe to c4:0a:cb:2d:af:06 (try 1/3) [208839.609951] cfg80211: Calling CRDA to update world regulatory domain [208839.613158] cfg80211: World regulatory domain updated: [208839.613166] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [208839.613171] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [208839.613176] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [208839.613179] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [208839.613183] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [208839.613186] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [208839.810921] wlan0: direct probe to c4:0a:cb:2d:af:06 (try 2/3) [208840.015169] wlan0: send auth to c4:0a:cb:2d:af:06 (try 3/3) [208840.017148] wlan0: authenticated [208840.019177] wlan0: associate with c4:0a:cb:2d:af:06 (try 1/3) [208840.028300] wlan0: RX AssocResp from c4:0a:cb:2d:af:06 (capab=0x431 status=0 aid=4) [208840.028545] wlan0: associated [208840.028682] cfg80211: Calling CRDA for country: IN [208840.032607] ath: EEPROM regdomain: 0x8164 [208840.032612] ath: EEPROM indicates we should expect a country code [208840.032614] ath: doing EEPROM country->regdmn map search [208840.032616] ath: country maps to regdmn code: 0x5b [208840.032619] ath: Country alpha2 being used: IN [208840.032621] ath: Regpair used: 0x5b [208840.032624] ath: regdomain 0x8164 dynamically updated by country IE [208840.032648] cfg80211: Regulatory domain changed to country: IN [208840.032650] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [208840.032653] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [208840.032655] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [208840.032658] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [208840.032660] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [210646.952351] wlan0: authenticate with c4:0a:cb:25:ce:66 [210646.969928] wlan0: direct probe to c4:0a:cb:25:ce:66 (try 1/3) [210646.970092] cfg80211: Calling CRDA to update world regulatory domain [210646.976348] cfg80211: World regulatory domain updated: [210646.976351] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [210646.976353] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [210646.976354] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [210646.976355] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [210646.976356] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [210646.976357] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [210647.171244] wlan0: direct probe to c4:0a:cb:25:ce:66 (try 2/3) [210647.375452] wlan0: direct probe to c4:0a:cb:25:ce:66 (try 3/3) [210647.579679] wlan0: authentication with c4:0a:cb:25:ce:66 timed out [210647.819860] wlan0: authenticate with c4:0a:cb:25:f6:a6 [210647.837816] wlan0: send auth to c4:0a:cb:25:f6:a6 (try 1/3) [210647.839721] wlan0: authenticated [210647.839997] wlan0: associate with c4:0a:cb:25:f6:a6 (try 1/3) [210647.846545] wlan0: RX AssocResp from c4:0a:cb:25:f6:a6 (capab=0x431 status=0 aid=1) [210647.846611] wlan0: associated [210647.846694] cfg80211: Calling CRDA for country: IN [210647.850280] ath: EEPROM regdomain: 0x8164 [210647.850285] ath: EEPROM indicates we should expect a country code [210647.850287] ath: doing EEPROM country->regdmn map search [210647.850290] ath: country maps to regdmn code: 0x5b [210647.850292] ath: Country alpha2 being used: IN [210647.850294] ath: Regpair used: 0x5b [210647.850297] ath: regdomain 0x8164 dynamically updated by country IE [210647.850320] cfg80211: Regulatory domain changed to country: IN [210647.850322] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [210647.850325] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [210647.850327] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [210647.850329] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [210647.850332] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [210652.860364] wlan0: deauthenticated from c4:0a:cb:25:f6:a6 (Reason: 3) [210652.896753] cfg80211: Calling CRDA to update world regulatory domain [210652.902860] cfg80211: World regulatory domain updated: [210652.902864] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [210652.902867] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [210652.902869] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [210652.902871] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [210652.902873] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [210652.902875] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [210653.046793] wlan0: authenticate with c4:0a:cb:2d:af:06 [210653.071046] wlan0: send auth to c4:0a:cb:2d:af:06 (try 1/3) [210653.076560] wlan0: authenticated [210653.077928] wlan0: associate with c4:0a:cb:2d:af:06 (try 1/3) [210653.092295] wlan0: RX AssocResp from c4:0a:cb:2d:af:06 (capab=0x431 status=0 aid=4) [210653.092364] wlan0: associated [210653.092553] cfg80211: Calling CRDA for country: IN [210653.096605] ath: EEPROM regdomain: 0x8164 [210653.096611] ath: EEPROM indicates we should expect a country code [210653.096614] ath: doing EEPROM country->regdmn map search [210653.096616] ath: country maps to regdmn code: 0x5b [210653.096618] ath: Country alpha2 being used: IN [210653.096620] ath: Regpair used: 0x5b [210653.096623] ath: regdomain 0x8164 dynamically updated by country IE [210653.096650] cfg80211: Regulatory domain changed to country: IN [210653.096652] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [210653.096655] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [210653.096658] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [210653.096660] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [210653.096662] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [210754.717027] cfg80211: Calling CRDA to update world regulatory domain [210754.745622] cfg80211: World regulatory domain updated: [210754.745629] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [210754.745633] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [210754.745636] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [210754.745638] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [210754.745641] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [210754.745643] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [210755.760358] wlan0: authenticate with c4:0a:cb:25:ce:66 [210755.784369] wlan0: direct probe to c4:0a:cb:25:ce:66 (try 1/3) [210755.987461] wlan0: direct probe to c4:0a:cb:25:ce:66 (try 2/3) [210756.191720] wlan0: direct probe to c4:0a:cb:25:ce:66 (try 3/3) [210756.395915] wlan0: authentication with c4:0a:cb:25:ce:66 timed out [210757.538403] wlan0: authenticate with c4:0a:cb:25:b5:56 [210757.560823] wlan0: send auth to c4:0a:cb:25:b5:56 (try 1/3) [210757.564769] wlan0: authenticated [210757.565269] wlan0: associate with c4:0a:cb:25:b5:56 (try 1/3) [210757.571378] wlan0: RX AssocResp from c4:0a:cb:25:b5:56 (capab=0x431 status=0 aid=6) [210757.571428] wlan0: associated [210757.571484] cfg80211: Calling CRDA for country: IN [210757.573958] ath: EEPROM regdomain: 0x8164 [210757.573961] ath: EEPROM indicates we should expect a country code [210757.573962] ath: doing EEPROM country->regdmn map search [210757.573963] ath: country maps to regdmn code: 0x5b [210757.573964] ath: Country alpha2 being used: IN [210757.573965] ath: Regpair used: 0x5b [210757.573967] ath: regdomain 0x8164 dynamically updated by country IE [210757.573988] cfg80211: Regulatory domain changed to country: IN [210757.573989] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [210757.573990] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [210757.573991] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [210757.573993] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [210757.573994] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [211122.182750] wlan0: authenticate with c4:0a:cb:25:f6:a6 [211122.200265] wlan0: direct probe to c4:0a:cb:25:f6:a6 (try 1/3) [211122.200362] cfg80211: Calling CRDA to update world regulatory domain [211122.203471] cfg80211: World regulatory domain updated: [211122.203475] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [211122.203477] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [211122.203479] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [211122.203481] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [211122.203483] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [211122.203485] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [211122.401984] wlan0: direct probe to c4:0a:cb:25:f6:a6 (try 2/3) [211122.606238] wlan0: send auth to c4:0a:cb:25:f6:a6 (try 3/3) [211122.608269] wlan0: authenticated [211122.610248] wlan0: associate with c4:0a:cb:25:f6:a6 (try 1/3) [211122.616463] wlan0: RX AssocResp from c4:0a:cb:25:f6:a6 (capab=0x431 status=0 aid=1) [211122.616537] wlan0: associated [211122.616655] cfg80211: Calling CRDA for country: IN [211122.621441] ath: EEPROM regdomain: 0x8164 [211122.621448] ath: EEPROM indicates we should expect a country code [211122.621452] ath: doing EEPROM country->regdmn map search [211122.621455] ath: country maps to regdmn code: 0x5b [211122.621459] ath: Country alpha2 being used: IN [211122.621461] ath: Regpair used: 0x5b [211122.621465] ath: regdomain 0x8164 dynamically updated by country IE [211122.621493] cfg80211: Regulatory domain changed to country: IN [211122.621495] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [211122.621500] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [211122.621503] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [211122.621507] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [211122.621510] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [211456.727260] wlan0: deauthenticating from c4:0a:cb:25:f6:a6 by local choice (reason=3) [211456.761241] cfg80211: Calling CRDA to update world regulatory domain [211456.768924] cfg80211: World regulatory domain updated: [211456.768930] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [211456.768934] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [211456.768937] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [211456.768940] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [211456.768942] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [211456.768944] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [211458.934112] ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root [211458.754388] PM: Syncing filesystems ... done. [211459.028747] PM: Preparing system for mem sleep [211459.029486] Freezing user space processes ... (elapsed 0.002 seconds) done. [211459.032426] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [211459.033659] PM: Entering mem sleep [211459.033709] Suspending console(s) (use no_console_suspend to debug) [211459.033911] sd 0:0:0:0: [sda] Synchronizing SCSI cache [211459.056031] sd 0:0:0:0: [sda] Stopping disk [211459.086610] mei_me 0000:00:16.0: H_RDY is not cleared 0x801A1A18 [211460.087729] PM: suspend of devices complete after 1052.707 msecs [211460.103785] PM: late suspend of devices complete after 16.036 msecs [211460.119779] r8169 0000:01:00.0: System wakeup enabled by ACPI [211460.135831] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [211460.151943] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [211460.183811] PM: noirq suspend of devices complete after 79.932 msecs [211460.183995] ACPI: Preparing to enter system sleep state S3 [211460.185034] PM: Saving platform NVS memory [211460.185588] Disabling non-boot CPUs ... [211460.186831] kvm: disabling virtualization on CPU1 [211460.287894] smpboot: CPU 1 is now offline [211460.289384] kvm: disabling virtualization on CPU2 [211460.391982] smpboot: CPU 2 is now offline [211460.392416] Broke affinity for irq 18 [211460.392425] Broke affinity for irq 23 [211460.392427] Broke affinity for irq 42 [211460.393430] kvm: disabling virtualization on CPU3 [211460.496106] smpboot: CPU 3 is now offline [211460.497284] ACPI: Low-level resume complete [211460.497331] PM: Restoring platform NVS memory [211460.497821] Enabling non-boot CPUs ... [211460.497856] x86: Booting SMP configuration: [211460.497857] smpboot: Booting Node 0 Processor 1 APIC 0x1 [211460.526204] kvm: enabling virtualization on CPU1 [211460.528576] CPU1 is up [211460.528594] smpboot: Booting Node 0 Processor 2 APIC 0x2 [211460.540043] kvm: enabling virtualization on CPU2 [211460.542422] CPU2 is up [211460.542439] smpboot: Booting Node 0 Processor 3 APIC 0x3 [211460.553881] kvm: enabling virtualization on CPU3 [211460.556254] CPU3 is up [211460.559387] ACPI: Waking up from system sleep state S3 [211460.609676] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [211460.641699] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [211460.706041] PM: noirq resume of devices complete after 140.460 msecs [211460.706145] PM: early resume of devices complete after 0.081 msecs [211460.706184] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X [211460.706351] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [211460.706474] r8169 0000:01:00.0: System wakeup disabled by ACPI [211460.706793] ath: phy0: ASPM enabled: 0x43 [211460.918235] usb 2-1.4: reset full-speed USB device number 15 using ehci-pci [211461.010484] usb 2-1.4: device firmware changed [211461.050156] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [211461.051658] ata3.00: configured for UDMA/100 [211461.082403] usb 2-1.3: reset high-speed USB device number 3 using ehci-pci [211462.019620] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [211463.517002] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [211463.552066] ata1.00: configured for UDMA/100 [211463.577113] sd 0:0:0:0: [sda] Starting disk [211463.610518] PM: resume of devices complete after 2901.051 msecs [211463.610689] PM: Finishing wakeup. [211463.610732] r8169 0000:01:00.0: no hotplug settings from platform [211463.610797] ath9k 0000:02:00.0: no hotplug settings from platform [211463.610849] rtsx_pci 0000:03:00.0: no hotplug settings from platform [211463.610961] usb 2-1.4: USB disconnect, device number 15 [211463.610693] Restarting tasks ... done. [211463.660386] video LNXVIDEO:00: Restoring backlight state [211463.681195] usb 2-1.4: new full-speed USB device number 16 using ehci-pci [211463.775524] usb 2-1.4: New USB device found, idVendor=0cf3, idProduct=311d [211463.775529] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [211463.775531] usb 2-1.4: Product: Bluetooth USB Host Controller [211463.775533] usb 2-1.4: Manufacturer: Atheros Communications [211463.775535] usb 2-1.4: SerialNumber: Alaska Day 2006 [211464.040997] usb 2-1.4: USB disconnect, device number 16 [211464.241828] usb 2-1.4: new full-speed USB device number 17 using ehci-pci [211464.308865] r8169 0000:01:00.0 eth0: link down [211464.308934] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [211464.354156] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [211465.407474] wlan0: authenticate with 2c:3e:cf:8f:4e:e4 [211465.431917] wlan0: direct probe to 2c:3e:cf:8f:4e:e4 (try 1/3) [211465.635352] wlan0: direct probe to 2c:3e:cf:8f:4e:e4 (try 2/3) [211465.839599] wlan0: send auth to 2c:3e:cf:8f:4e:e4 (try 3/3) [211465.841511] wlan0: authenticated [211465.843588] wlan0: associate with 2c:3e:cf:8f:4e:e4 (try 1/3) [211465.847273] wlan0: RX AssocResp from 2c:3e:cf:8f:4e:e4 (capab=0x431 status=0 aid=2) [211465.847333] wlan0: associated [211465.847364] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [211465.847449] cfg80211: Calling CRDA for country: IN [211466.059833] ath: EEPROM regdomain: 0x8164 [211466.059837] ath: EEPROM indicates we should expect a country code [211466.059839] ath: doing EEPROM country->regdmn map search [211466.059840] ath: country maps to regdmn code: 0x5b [211466.059842] ath: Country alpha2 being used: IN [211466.059843] ath: Regpair used: 0x5b [211466.059845] ath: regdomain 0x8164 dynamically updated by country IE [211466.059866] cfg80211: Regulatory domain changed to country: IN [211466.059867] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [211466.059869] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [211466.059870] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [211466.059872] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [211466.059873] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [211469.341903] usb 2-1.4: New USB device found, idVendor=0cf3, idProduct=311d [211469.341911] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [211469.341916] usb 2-1.4: Product: Bluetooth USB Host Controller [211469.341920] usb 2-1.4: Manufacturer: Atheros Communications [211469.341924] usb 2-1.4: SerialNumber: Alaska Day 2006 [213278.263647] wlan0: deauthenticated from 2c:3e:cf:8f:4e:e4 (Reason: 2) [213278.300301] cfg80211: Calling CRDA to update world regulatory domain [213278.306971] cfg80211: World regulatory domain updated: [213278.306977] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [213278.306980] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [213278.306984] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [213278.306986] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [213278.306989] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [213278.306991] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [213278.583958] wlan0: authenticate with 2c:3e:cf:8f:48:34 [213278.607025] wlan0: direct probe to 2c:3e:cf:8f:48:34 (try 1/3) [213278.810312] wlan0: direct probe to 2c:3e:cf:8f:48:34 (try 2/3) [213279.014572] wlan0: direct probe to 2c:3e:cf:8f:48:34 (try 3/3) [213279.218779] wlan0: authentication with 2c:3e:cf:8f:48:34 timed out [213279.516548] wlan0: authenticate with b0:00:b4:20:69:34 [213279.534899] wlan0: send auth to b0:00:b4:20:69:34 (try 1/3) [213279.537004] wlan0: authenticated [213279.539099] wlan0: associate with b0:00:b4:20:69:34 (try 1/3) [213279.543138] wlan0: RX AssocResp from b0:00:b4:20:69:34 (capab=0x431 status=0 aid=4) [213279.543206] wlan0: associated [213279.543260] cfg80211: Calling CRDA for country: IN [213279.545863] ath: EEPROM regdomain: 0x8164 [213279.545867] ath: EEPROM indicates we should expect a country code [213279.545869] ath: doing EEPROM country->regdmn map search [213279.545870] ath: country maps to regdmn code: 0x5b [213279.545872] ath: Country alpha2 being used: IN [213279.545873] ath: Regpair used: 0x5b [213279.545875] ath: regdomain 0x8164 dynamically updated by country IE [213279.545896] cfg80211: Regulatory domain changed to country: IN [213279.545897] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [213279.545900] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [213279.545901] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [213279.545903] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [213279.545904] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [213343.715780] wlan0: authenticate with b0:00:b4:20:63:a4 [213343.733396] wlan0: send auth to b0:00:b4:20:63:a4 (try 1/3) [213343.733852] cfg80211: Calling CRDA to update world regulatory domain [213343.737331] cfg80211: World regulatory domain updated: [213343.737334] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [213343.737337] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [213343.737339] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [213343.737340] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [213343.737342] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [213343.737344] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [213343.737690] wlan0: authenticated [213343.740428] wlan0: associate with b0:00:b4:20:63:a4 (try 1/3) [213343.744041] wlan0: RX AssocResp from b0:00:b4:20:63:a4 (capab=0x431 status=0 aid=1) [213343.744093] wlan0: associated [213343.744138] cfg80211: Calling CRDA for country: IN [213343.747182] ath: EEPROM regdomain: 0x8164 [213343.747186] ath: EEPROM indicates we should expect a country code [213343.747189] ath: doing EEPROM country->regdmn map search [213343.747191] ath: country maps to regdmn code: 0x5b [213343.747193] ath: Country alpha2 being used: IN [213343.747195] ath: Regpair used: 0x5b [213343.747197] ath: regdomain 0x8164 dynamically updated by country IE [213343.747220] cfg80211: Regulatory domain changed to country: IN [213343.747222] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [213343.747225] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [213343.747227] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [213343.747229] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [213343.747231] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [213704.127943] wlan0: authenticate with b0:00:b4:20:69:34 [213704.145925] wlan0: send auth to b0:00:b4:20:69:34 (try 1/3) [213704.146329] cfg80211: Calling CRDA to update world regulatory domain [213704.147797] wlan0: authenticated [213704.148090] wlan0: associate with b0:00:b4:20:69:34 (try 1/3) [213704.148775] cfg80211: World regulatory domain updated: [213704.148777] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [213704.148779] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [213704.148780] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [213704.148781] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [213704.148782] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [213704.148783] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [213704.151661] wlan0: RX AssocResp from b0:00:b4:20:69:34 (capab=0x431 status=0 aid=8) [213704.151713] wlan0: associated [213704.151759] cfg80211: Calling CRDA for country: IN [213704.155118] ath: EEPROM regdomain: 0x8164 [213704.155123] ath: EEPROM indicates we should expect a country code [213704.155126] ath: doing EEPROM country->regdmn map search [213704.155128] ath: country maps to regdmn code: 0x5b [213704.155130] ath: Country alpha2 being used: IN [213704.155132] ath: Regpair used: 0x5b [213704.155135] ath: regdomain 0x8164 dynamically updated by country IE [213704.155160] cfg80211: Regulatory domain changed to country: IN [213704.155161] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [213704.155164] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [213704.155167] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [213704.155169] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [213704.155171] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [214080.571976] wlan0: deauthenticating from b0:00:b4:20:69:34 by local choice (reason=3) [214080.587609] cfg80211: Calling CRDA to update world regulatory domain [214080.593786] cfg80211: World regulatory domain updated: [214080.593791] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [214080.593794] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [214080.593797] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [214080.593800] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [214080.593802] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [214080.593805] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [214082.242831] PM: Syncing filesystems ... done. [214082.522940] PM: Preparing system for mem sleep [214082.523084] Freezing user space processes ... (elapsed 0.001 seconds) done. [214082.524931] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [214082.526166] PM: Entering mem sleep [214082.526221] Suspending console(s) (use no_console_suspend to debug) [214082.526395] sd 0:0:0:0: [sda] Synchronizing SCSI cache [214082.526659] sd 0:0:0:0: [sda] Stopping disk [214082.578921] mei_me 0000:00:16.0: H_RDY is not cleared 0x801A1A18 [214083.557496] PM: suspend of devices complete after 1030.002 msecs [214083.573511] PM: late suspend of devices complete after 15.994 msecs [214083.589527] r8169 0000:01:00.0: System wakeup enabled by ACPI [214083.605579] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [214083.621691] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [214083.653556] PM: noirq suspend of devices complete after 79.952 msecs [214083.653741] ACPI: Preparing to enter system sleep state S3 [214083.654853] PM: Saving platform NVS memory [214083.655576] Disabling non-boot CPUs ... [214083.656816] kvm: disabling virtualization on CPU1 [214083.757616] smpboot: CPU 1 is now offline [214083.759080] kvm: disabling virtualization on CPU2 [214083.861760] smpboot: CPU 2 is now offline [214083.863174] kvm: disabling virtualization on CPU3 [214083.965847] smpboot: CPU 3 is now offline [214083.967015] ACPI: Low-level resume complete [214083.967062] PM: Restoring platform NVS memory [214083.967559] Enabling non-boot CPUs ... [214083.967594] x86: Booting SMP configuration: [214083.967595] smpboot: Booting Node 0 Processor 1 APIC 0x1 [214083.995103] kvm: enabling virtualization on CPU1 [214083.997473] CPU1 is up [214083.997489] smpboot: Booting Node 0 Processor 2 APIC 0x2 [214084.008938] kvm: enabling virtualization on CPU2 [214084.011323] CPU2 is up [214084.011340] smpboot: Booting Node 0 Processor 3 APIC 0x3 [214084.022782] kvm: enabling virtualization on CPU3 [214084.025180] CPU3 is up [214084.028313] ACPI: Waking up from system sleep state S3 [214084.079416] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [214084.111439] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [214084.175785] PM: noirq resume of devices complete after 141.267 msecs [214084.175887] PM: early resume of devices complete after 0.081 msecs [214084.175962] r8169 0000:01:00.0: System wakeup disabled by ACPI [214084.176249] ath: phy0: ASPM enabled: 0x43 [214084.176341] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [214084.176529] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X [214084.387882] usb 2-1.3: reset high-speed USB device number 3 using ehci-pci [214084.519925] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [214084.521450] ata3.00: configured for UDMA/100 [214084.552087] usb 2-1.4: reset full-speed USB device number 17 using ehci-pci [214084.644331] usb 2-1.4: device firmware changed [214086.017960] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [214087.715572] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [214087.750838] ata1.00: configured for UDMA/100 [214087.775684] sd 0:0:0:0: [sda] Starting disk [214087.808722] PM: resume of devices complete after 3628.681 msecs [214087.808884] PM: Finishing wakeup. [214087.808935] r8169 0000:01:00.0: no hotplug settings from platform [214087.808987] ath9k 0000:02:00.0: no hotplug settings from platform [214087.809029] rtsx_pci 0000:03:00.0: no hotplug settings from platform [214087.811617] usb 2-1.4: USB disconnect, device number 17 [214087.808886] Restarting tasks ... done. [214087.841277] video LNXVIDEO:00: Restoring backlight state [214087.883806] usb 2-1.4: new full-speed USB device number 18 using ehci-pci [214087.977696] usb 2-1.4: New USB device found, idVendor=0cf3, idProduct=311d [214087.977701] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [214087.977704] usb 2-1.4: Product: Bluetooth USB Host Controller [214087.977706] usb 2-1.4: Manufacturer: Atheros Communications [214087.977708] usb 2-1.4: SerialNumber: Alaska Day 2006 [214088.279009] usb 2-1.4: USB disconnect, device number 18 [214088.279182] r8169 0000:01:00.0 eth0: link down [214088.279307] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [214088.329120] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [214088.484706] usb 2-1.4: new full-speed USB device number 19 using ehci-pci [214088.578716] usb 2-1.4: New USB device found, idVendor=0cf3, idProduct=311d [214088.578720] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [214088.578722] usb 2-1.4: Product: Bluetooth USB Host Controller [214088.578724] usb 2-1.4: Manufacturer: Atheros Communications [214088.578725] usb 2-1.4: SerialNumber: Alaska Day 2006 [214089.358106] wlan0: authenticate with b0:00:b4:20:69:34 [214089.378400] wlan0: send auth to b0:00:b4:20:69:34 (try 1/3) [214089.380352] wlan0: authenticated [214089.381499] wlan0: associate with b0:00:b4:20:69:34 (try 1/3) [214089.384977] wlan0: RX AssocResp from b0:00:b4:20:69:34 (capab=0x431 status=0 aid=3) [214089.385030] wlan0: associated [214089.385056] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [214089.385128] cfg80211: Calling CRDA for country: IN [214089.390291] ath: EEPROM regdomain: 0x8164 [214089.390293] ath: EEPROM indicates we should expect a country code [214089.390295] ath: doing EEPROM country->regdmn map search [214089.390295] ath: country maps to regdmn code: 0x5b [214089.390297] ath: Country alpha2 being used: IN [214089.390297] ath: Regpair used: 0x5b [214089.390299] ath: regdomain 0x8164 dynamically updated by country IE [214089.390317] cfg80211: Regulatory domain changed to country: IN [214089.390318] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [214089.390319] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [214089.390320] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [214089.390321] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [214089.390322] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [214156.647584] wlan0: authenticate with 2c:3e:cf:8f:4e:e4 [214156.665330] wlan0: send auth to 2c:3e:cf:8f:4e:e4 (try 1/3) [214156.665457] cfg80211: Calling CRDA to update world regulatory domain [214156.667214] wlan0: authenticated [214156.668136] cfg80211: World regulatory domain updated: [214156.668139] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [214156.668141] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [214156.668143] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [214156.668145] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [214156.668147] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [214156.668148] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [214156.670312] wlan0: associate with 2c:3e:cf:8f:4e:e4 (try 1/3) [214156.675900] wlan0: RX AssocResp from 2c:3e:cf:8f:4e:e4 (capab=0x431 status=0 aid=6) [214156.675963] wlan0: associated [214156.676309] cfg80211: Calling CRDA for country: IN [214156.679345] ath: EEPROM regdomain: 0x8164 [214156.679349] ath: EEPROM indicates we should expect a country code [214156.679351] ath: doing EEPROM country->regdmn map search [214156.679353] ath: country maps to regdmn code: 0x5b [214156.679355] ath: Country alpha2 being used: IN [214156.679357] ath: Regpair used: 0x5b [214156.679359] ath: regdomain 0x8164 dynamically updated by country IE [214156.679383] cfg80211: Regulatory domain changed to country: IN [214156.679384] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [214156.679387] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [214156.679389] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [214156.679391] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [214156.679393] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [215752.468592] ath: phy0: Failed to stop TX DMA, queues=0x004! [215752.482903] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [215752.482950] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [215969.308006] wlan0: deauthenticated from 2c:3e:cf:8f:4e:e4 (Reason: 2) [215969.351037] cfg80211: Calling CRDA to update world regulatory domain [215969.358279] cfg80211: World regulatory domain updated: [215969.358283] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [215969.358286] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [215969.358288] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [215969.358290] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [215969.358292] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [215969.358294] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [215969.617155] wlan0: authenticate with b0:00:b4:20:69:34 [215969.635126] wlan0: send auth to b0:00:b4:20:69:34 (try 1/3) [215969.637016] wlan0: authenticated [215969.640947] wlan0: associate with b0:00:b4:20:69:34 (try 1/3) [215969.644496] wlan0: RX AssocResp from b0:00:b4:20:69:34 (capab=0x431 status=0 aid=8) [215969.644550] wlan0: associated [215969.644611] cfg80211: Calling CRDA for country: IN [215969.648452] ath: EEPROM regdomain: 0x8164 [215969.648457] ath: EEPROM indicates we should expect a country code [215969.648460] ath: doing EEPROM country->regdmn map search [215969.648462] ath: country maps to regdmn code: 0x5b [215969.648465] ath: Country alpha2 being used: IN [215969.648467] ath: Regpair used: 0x5b [215969.648469] ath: regdomain 0x8164 dynamically updated by country IE [215969.648495] cfg80211: Regulatory domain changed to country: IN [215969.648497] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [215969.648500] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [215969.648502] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [215969.648505] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [215969.648507] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [216706.984341] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use) [216789.135527] systemd-hostnamed[19533]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [217782.110486] wlan0: deauthenticated from b0:00:b4:20:69:34 (Reason: 2) [217782.158617] cfg80211: Calling CRDA to update world regulatory domain [217782.238998] cfg80211: World regulatory domain updated: [217782.239002] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [217782.239003] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [217782.239005] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [217782.239006] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [217782.239007] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [217782.239009] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [217782.424674] wlan0: authenticate with c4:0a:cb:2d:84:e4 [217782.449015] wlan0: send auth to c4:0a:cb:2d:84:e4 (try 1/3) [217782.450911] wlan0: authenticated [217782.451440] wlan0: associate with c4:0a:cb:2d:84:e4 (try 1/3) [217782.456354] wlan0: RX AssocResp from c4:0a:cb:2d:84:e4 (capab=0x431 status=0 aid=1) [217782.456406] wlan0: associated [217782.456460] cfg80211: Calling CRDA for country: IN [217782.458770] ath: EEPROM regdomain: 0x8164 [217782.458772] ath: EEPROM indicates we should expect a country code [217782.458774] ath: doing EEPROM country->regdmn map search [217782.458775] ath: country maps to regdmn code: 0x5b [217782.458776] ath: Country alpha2 being used: IN [217782.458777] ath: Regpair used: 0x5b [217782.458778] ath: regdomain 0x8164 dynamically updated by country IE [217782.458799] cfg80211: Regulatory domain changed to country: IN [217782.458800] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [217782.458801] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [217782.458802] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [217782.458803] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [217782.458804] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [217787.466209] wlan0: deauthenticated from c4:0a:cb:2d:84:e4 (Reason: 3) [217787.504621] cfg80211: Calling CRDA to update world regulatory domain [217787.512860] cfg80211: World regulatory domain updated: [217787.512866] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [217787.512868] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [217787.512871] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [217787.512873] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [217787.512875] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [217787.512877] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [217787.722495] wlan0: authenticate with 2c:3e:cf:8f:48:34 [217787.749514] wlan0: send auth to 2c:3e:cf:8f:48:34 (try 1/3) [217787.753225] wlan0: authenticated [217787.753517] wlan0: associate with 2c:3e:cf:8f:48:34 (try 1/3) [217787.757045] wlan0: RX AssocResp from 2c:3e:cf:8f:48:34 (capab=0x431 status=0 aid=3) [217787.757094] wlan0: associated [217787.757145] cfg80211: Calling CRDA for country: IN [217787.760378] ath: EEPROM regdomain: 0x8164 [217787.760383] ath: EEPROM indicates we should expect a country code [217787.760386] ath: doing EEPROM country->regdmn map search [217787.760388] ath: country maps to regdmn code: 0x5b [217787.760391] ath: Country alpha2 being used: IN [217787.760392] ath: Regpair used: 0x5b [217787.760395] ath: regdomain 0x8164 dynamically updated by country IE [217787.760421] cfg80211: Regulatory domain changed to country: IN [217787.760423] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [217787.760425] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [217787.760428] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [217787.760430] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [217787.760432] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [219600.445771] wlan0: deauthenticated from 2c:3e:cf:8f:48:34 (Reason: 2) [219600.489838] cfg80211: Calling CRDA to update world regulatory domain [219600.496982] cfg80211: World regulatory domain updated: [219600.496987] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [219600.496991] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [219600.496994] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [219600.496997] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [219600.496999] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [219600.497002] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [219600.695827] wlan0: authenticate with c4:0a:cb:5c:03:24 [219600.713402] wlan0: direct probe to c4:0a:cb:5c:03:24 (try 1/3) [219600.916427] wlan0: direct probe to c4:0a:cb:5c:03:24 (try 2/3) [219601.120648] wlan0: direct probe to c4:0a:cb:5c:03:24 (try 3/3) [219601.324873] wlan0: authentication with c4:0a:cb:5c:03:24 timed out [219601.568891] wlan0: authenticate with b0:00:b4:20:63:a4 [219601.586593] wlan0: send auth to b0:00:b4:20:63:a4 (try 1/3) [219601.589564] wlan0: authenticated [219601.593203] wlan0: associate with b0:00:b4:20:63:a4 (try 1/3) [219601.596718] wlan0: RX AssocResp from b0:00:b4:20:63:a4 (capab=0x431 status=0 aid=3) [219601.596781] wlan0: associated [219601.596964] cfg80211: Calling CRDA for country: IN [219601.600858] ath: EEPROM regdomain: 0x8164 [219601.600862] ath: EEPROM indicates we should expect a country code [219601.600865] ath: doing EEPROM country->regdmn map search [219601.600867] ath: country maps to regdmn code: 0x5b [219601.600869] ath: Country alpha2 being used: IN [219601.600871] ath: Regpair used: 0x5b [219601.600874] ath: regdomain 0x8164 dynamically updated by country IE [219601.600898] cfg80211: Regulatory domain changed to country: IN [219601.600900] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [219601.600903] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [219601.600905] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [219601.600907] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [219601.600910] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [221351.123638] systemd-hostnamed[20222]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [221413.919317] wlan0: deauthenticated from b0:00:b4:20:63:a4 (Reason: 2) [221413.966106] cfg80211: Calling CRDA to update world regulatory domain [221413.972652] cfg80211: World regulatory domain updated: [221413.972655] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [221413.972657] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [221413.972659] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [221413.972661] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [221413.972662] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [221413.972664] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [221415.001394] wlan0: authenticate with 2c:3e:cf:8f:4e:e4 [221415.026243] wlan0: direct probe to 2c:3e:cf:8f:4e:e4 (try 1/3) [221415.228583] wlan0: direct probe to 2c:3e:cf:8f:4e:e4 (try 2/3) [221415.432822] wlan0: send auth to 2c:3e:cf:8f:4e:e4 (try 3/3) [221415.434759] wlan0: authenticated [221415.436817] wlan0: associate with 2c:3e:cf:8f:4e:e4 (try 1/3) [221415.445252] wlan0: RX AssocResp from 2c:3e:cf:8f:4e:e4 (capab=0x431 status=0 aid=10) [221415.445306] wlan0: associated [221415.445362] cfg80211: Calling CRDA for country: IN [221415.447891] ath: EEPROM regdomain: 0x8164 [221415.447896] ath: EEPROM indicates we should expect a country code [221415.447898] ath: doing EEPROM country->regdmn map search [221415.447899] ath: country maps to regdmn code: 0x5b [221415.447900] ath: Country alpha2 being used: IN [221415.447901] ath: Regpair used: 0x5b [221415.447904] ath: regdomain 0x8164 dynamically updated by country IE [221415.447927] cfg80211: Regulatory domain changed to country: IN [221415.447928] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [221415.447931] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [221415.447933] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [221415.447934] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [221415.447936] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [222564.346297] systemd-hostnamed[20543]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [222658.649485] type=1400 audit(1421779536.752:91): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=20711 comm="apparmor_parser" [222658.649491] type=1400 audit(1421779536.752:92): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=20711 comm="apparmor_parser" [222658.649833] type=1400 audit(1421779536.752:93): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=20711 comm="apparmor_parser" [222675.292104] ata1.00: exception Emask 0x0 SAct 0x6000007f SErr 0x0 action 0x0 [222675.292112] ata1.00: irq_stat 0x40000001 [222675.292117] ata1.00: failed command: WRITE FPDMA QUEUED [222675.292131] ata1.00: cmd 61/88:00:f8:d2:b8/00:00:07:00:00/40 tag 0 ncq 69632 out [222675.292131] res 41/04:08:2f:1b:c1/00:00:00:00:00/00 Emask 0x1 (device error) [222675.292144] ata1.00: status: { DRDY ERR } [222675.292145] ata1.00: error: { ABRT } [222675.292147] ata1.00: failed command: WRITE FPDMA QUEUED [222675.292154] ata1.00: cmd 61/08:08:80:58:e5/00:00:2d:00:00/40 tag 1 ncq 4096 out [222675.292154] res 41/04:08:2f:1b:c1/00:00:00:00:00/00 Emask 0x1 (device error) [222675.292156] ata1.00: status: { DRDY ERR } [222675.292157] ata1.00: error: { ABRT } [222675.292159] ata1.00: failed command: WRITE FPDMA QUEUED [222675.292166] ata1.00: cmd 61/40:10:40:b4:a4/00:00:2d:00:00/40 tag 2 ncq 32768 out [222675.292166] res 41/04:08:2f:1b:c1/00:00:00:00:00/00 Emask 0x1 (device error) [222675.292167] ata1.00: status: { DRDY ERR } [222675.292168] ata1.00: error: { ABRT } [222675.292170] ata1.00: failed command: WRITE FPDMA QUEUED [222675.292175] ata1.00: cmd 61/40:18:30:66:a7/00:00:1f:00:00/40 tag 3 ncq 32768 out [222675.292175] res 41/04:08:2f:1b:c1/00:00:00:00:00/00 Emask 0x1 (device error) [222675.292177] ata1.00: status: { DRDY ERR } [222675.292179] ata1.00: error: { ABRT } [222675.292180] ata1.00: failed command: WRITE FPDMA QUEUED [222675.292186] ata1.00: cmd 61/38:20:60:ae:3a/00:00:06:00:00/40 tag 4 ncq 28672 out [222675.292186] res 41/04:08:2f:1b:c1/00:00:00:00:00/00 Emask 0x1 (device error) [222675.292188] ata1.00: status: { DRDY ERR } [222675.292189] ata1.00: error: { ABRT } [222675.292190] ata1.00: failed command: WRITE FPDMA QUEUED [222675.292196] ata1.00: cmd 61/08:28:f0:87:d0/00:00:06:00:00/40 tag 5 ncq 4096 out [222675.292196] res 41/04:08:2f:1b:c1/00:00:00:00:00/00 Emask 0x1 (device error) [222675.292198] ata1.00: status: { DRDY ERR } [222675.292199] ata1.00: error: { ABRT } [222675.292200] ata1.00: failed command: WRITE FPDMA QUEUED [222675.292205] ata1.00: cmd 61/40:30:f8:87:d0/03:00:06:00:00/40 tag 6 ncq 425984 out [222675.292205] res 41/04:08:2f:1b:c1/00:00:00:00:00/00 Emask 0x1 (device error) [222675.292206] ata1.00: status: { DRDY ERR } [222675.292207] ata1.00: error: { ABRT } [222675.292209] ata1.00: failed command: READ FPDMA QUEUED [222675.292215] ata1.00: cmd 60/08:e8:28:1b:c1/00:00:00:00:00/40 tag 29 ncq 4096 in [222675.292215] res 41/40:00:2f:1b:c1/00:00:00:00:00/00 Emask 0x409 (media error) [222675.292216] ata1.00: status: { DRDY ERR } [222675.292217] ata1.00: error: { UNC } [222675.292218] ata1.00: failed command: WRITE FPDMA QUEUED [222675.292224] ata1.00: cmd 61/40:f0:00:93:a4/00:00:2d:00:00/40 tag 30 ncq 32768 out [222675.292224] res 41/04:08:2f:1b:c1/00:00:00:00:00/00 Emask 0x1 (device error) [222675.292226] ata1.00: status: { DRDY ERR } [222675.292227] ata1.00: error: { ABRT } [222675.484118] ata1.00: configured for UDMA/100 [222675.484161] sd 0:0:0:0: [sda] Unhandled sense code [222675.484173] sd 0:0:0:0: [sda] [222675.484174] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [222675.484175] sd 0:0:0:0: [sda] [222675.484176] Sense Key : Medium Error [current] [descriptor] [222675.484178] Descriptor sense data with sense descriptors (in hex): [222675.484179] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [222675.484184] 00 c1 1b 2f [222675.484186] sd 0:0:0:0: [sda] [222675.484188] Add. Sense: Unrecovered read error - auto reallocate failed [222675.484189] sd 0:0:0:0: [sda] CDB: [222675.484190] Read(10): 28 00 00 c1 1b 28 00 00 08 00 [222675.484195] end_request: I/O error, dev sda, sector 12655407 [222675.484213] ata1: EH complete [222675.484247] EXT4-fs error (device sda1): ext4_find_entry:1302: inode #396511: comm updatedb.mlocat: reading directory lblock 0 [223100.715048] ath: phy0: Failed to stop TX DMA, queues=0x005! [223100.728361] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [223100.728395] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [223228.228050] wlan0: deauthenticated from 2c:3e:cf:8f:4e:e4 (Reason: 2) [223228.269290] cfg80211: Calling CRDA to update world regulatory domain [223228.318920] cfg80211: World regulatory domain updated: [223228.318923] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [223228.318925] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [223228.318926] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [223228.318927] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [223228.318928] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [223228.318929] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [223228.532900] wlan0: authenticate with b0:00:b4:20:69:34 [223228.556821] wlan0: direct probe to b0:00:b4:20:69:34 (try 1/3) [223228.759983] wlan0: direct probe to b0:00:b4:20:69:34 (try 2/3) [223228.964151] wlan0: direct probe to b0:00:b4:20:69:34 (try 3/3) [223229.168421] wlan0: authentication with b0:00:b4:20:69:34 timed out [223229.408447] wlan0: authenticate with c4:0a:cb:2d:84:e4 [223229.426223] wlan0: send auth to c4:0a:cb:2d:84:e4 (try 1/3) [223229.430750] wlan0: authenticated [223229.432696] wlan0: associate with c4:0a:cb:2d:84:e4 (try 1/3) [223229.437271] wlan0: RX AssocResp from c4:0a:cb:2d:84:e4 (capab=0x431 status=0 aid=2) [223229.437354] wlan0: associated [223229.437436] cfg80211: Calling CRDA for country: IN [223229.441047] ath: EEPROM regdomain: 0x8164 [223229.441051] ath: EEPROM indicates we should expect a country code [223229.441053] ath: doing EEPROM country->regdmn map search [223229.441056] ath: country maps to regdmn code: 0x5b [223229.441058] ath: Country alpha2 being used: IN [223229.441060] ath: Regpair used: 0x5b [223229.441063] ath: regdomain 0x8164 dynamically updated by country IE [223229.441087] cfg80211: Regulatory domain changed to country: IN [223229.441089] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [223229.441092] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [223229.441094] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [223229.441096] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [223229.441099] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [223296.094143] wlan0: authenticate with b0:00:b4:20:63:a4 [223296.111763] wlan0: direct probe to b0:00:b4:20:63:a4 (try 1/3) [223296.111943] cfg80211: Calling CRDA to update world regulatory domain [223296.114727] cfg80211: World regulatory domain updated: [223296.114731] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [223296.114733] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [223296.114735] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [223296.114737] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [223296.114739] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [223296.114740] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [223296.313067] wlan0: send auth to b0:00:b4:20:63:a4 (try 2/3) [223296.315071] wlan0: authenticated [223296.317113] wlan0: associate with b0:00:b4:20:63:a4 (try 1/3) [223296.320736] wlan0: RX AssocResp from b0:00:b4:20:63:a4 (capab=0x431 status=0 aid=2) [223296.320833] wlan0: associated [223296.320994] cfg80211: Calling CRDA for country: IN [223296.326271] ath: EEPROM regdomain: 0x8164 [223296.326277] ath: EEPROM indicates we should expect a country code [223296.326281] ath: doing EEPROM country->regdmn map search [223296.326284] ath: country maps to regdmn code: 0x5b [223296.326287] ath: Country alpha2 being used: IN [223296.326290] ath: Regpair used: 0x5b [223296.326293] ath: regdomain 0x8164 dynamically updated by country IE [223296.326319] cfg80211: Regulatory domain changed to country: IN [223296.326323] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [223296.326326] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [223296.326330] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [223296.326334] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [223296.326337] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [223806.670919] ath: phy0: Failed to stop TX DMA, queues=0x005! [224617.587735] wlan0: authenticate with 2c:3e:cf:8f:48:34 [224617.605275] wlan0: direct probe to 2c:3e:cf:8f:48:34 (try 1/3) [224617.605341] cfg80211: Calling CRDA to update world regulatory domain [224617.607761] cfg80211: World regulatory domain updated: [224617.607764] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [224617.607766] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [224617.607768] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [224617.607770] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [224617.607772] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [224617.607774] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [224617.806478] wlan0: send auth to 2c:3e:cf:8f:48:34 (try 2/3) [224617.813099] wlan0: authenticated [224617.814420] wlan0: associate with 2c:3e:cf:8f:48:34 (try 1/3) [224617.818079] wlan0: RX AssocResp from 2c:3e:cf:8f:48:34 (capab=0x431 status=0 aid=2) [224617.818154] wlan0: associated [224617.818271] cfg80211: Calling CRDA for country: IN [224617.822697] ath: EEPROM regdomain: 0x8164 [224617.822699] ath: EEPROM indicates we should expect a country code [224617.822701] ath: doing EEPROM country->regdmn map search [224617.822701] ath: country maps to regdmn code: 0x5b [224617.822702] ath: Country alpha2 being used: IN [224617.822703] ath: Regpair used: 0x5b [224617.822704] ath: regdomain 0x8164 dynamically updated by country IE [224617.822723] cfg80211: Regulatory domain changed to country: IN [224617.822724] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [224617.822725] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [224617.822726] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [224617.822727] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [224617.822728] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm) [226429.827487] wlan0: deauthenticated from 2c:3e:cf:8f:48:34 (Reason: 2) [226429.874997] cfg80211: Calling CRDA to update world regulatory domain [226429.879886] cfg80211: World regulatory domain updated: [226429.879888] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [226429.879890] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [226429.879891] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [226429.879892] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [226429.879893] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [226429.879894] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [226430.145314] wlan0: authenticate with b0:00:b4:20:63:a4 [226430.169363] wlan0: send auth to b0:00:b4:20:63:a4 (try 1/3) [226430.171271] wlan0: authenticated [226430.172391] wlan0: associate with b0:00:b4:20:63:a4 (try 1/3) [226430.178547] wlan0: RX AssocResp from b0:00:b4:20:63:a4 (capab=0x431 status=0 aid=3) [226430.178620] wlan0: associated [226430.178799] cfg80211: Calling CRDA for country: IN [226430.182188] ath: EEPROM regdomain: 0x8164 [226430.182192] ath: EEPROM indicates we should expect a country code [226430.182195] ath: doing EEPROM country->regdmn map search [226430.182197] ath: country maps to regdmn code: 0x5b [226430.182199] ath: Country alpha2 being used: IN [226430.182201] ath: Regpair used: 0x5b [226430.182204] ath: regdomain 0x8164 dynamically updated by country IE [226430.182229] cfg80211: Regulatory domain changed to country: IN [226430.182231] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [226430.182234] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [226430.182237] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [226430.182239] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [226430.182241] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm)