[ 0.000000] Using PowerMac machine description [ 0.000000] Total memory = 768MB; using 2048kB for hash table (at cfe00000) [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.32-22-powerpc (buildd@adare) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #36-Ubuntu Thu Jun 3 23:00:32 UTC 2010 (Ubuntu 2.6.32-22.36-powerpc 2.6.32.11+drm33.2) [ 0.000000] Found initrd at 0xc1d00000:0xc2596000 [ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2 [ 0.000000] Mapped at 0xff7c0000 [ 0.000000] Found a Intrepid mac-io controller, rev: 0, mapped at 0xff740000 [ 0.000000] Processor NAP mode on idle enabled. [ 0.000000] PowerMac motherboard: iBook G4 [ 0.000000] via-pmu: Server Mode is disabled [ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c [ 0.000000] bootconsole [udbg0] enabled [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f0000000 ranges: [ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 [ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges: [ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000 [ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f4000000 ranges: [ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000 [ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000 [ 0.000000] nvram: Checking bank 0... [ 0.000000] nvram: gen0=358, gen1=359 [ 0.000000] nvram: Active bank is: 1 [ 0.000000] nvram: OF partition at 0x410 [ 0.000000] nvram: XP partition at 0x1020 [ 0.000000] nvram: NR partition at 0x1120 [ 0.000000] Top of RAM: 0x30000000, Total RAM: 0x30000000 [ 0.000000] Memory hole size: 0MB [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00030000 [ 0.000000] Normal 0x00030000 -> 0x00030000 [ 0.000000] HighMem 0x00030000 -> 0x00030000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00030000 [ 0.000000] On node 0 totalpages: 196608 [ 0.000000] free_area_init_node: node 0, pgdat c073c9cc, node_mem_map c07d4000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 195072 pages, LIFO batch:31 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 195072 [ 0.000000] Kernel command line: root=/dev/hda4 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] High memory: 0k [ 0.000000] Memory: 759808k/786432k available (7200k kernel code, 26140k reserved, 280k data, 481k bss, 336k init) [ 0.000000] Kernel virtual memory layout: [ 0.000000] * 0xfffef000..0xfffff000 : fixmap [ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs [ 0.000000] * 0xfdf32000..0xff800000 : early ioremap [ 0.000000] * 0xf1000000..0xfdf32000 : vmalloc & ioremap [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:512 [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs [ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f [ 0.000000] mpic: Initializing for 64 sources [ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off [ 0.000000] time_init: decrementer frequency = 18.432000 MHz [ 0.000000] time_init: processor frequency = 1333.333330 MHz [ 0.000000] clocksource: timebase mult[d9038e4] shift[22] registered [ 0.000000] clockevent: decrementer mult[4b7f5a5] shift[32] cpu[0] [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled, bootconsole disabled [ 0.000208] Security Framework initialized [ 0.000309] AppArmor: AppArmor initialized [ 0.000334] Mount-cache hash table entries: 512 [ 0.000834] device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1" [ 0.005011] Initializing cgroup subsys ns [ 0.005030] Initializing cgroup subsys devices [ 0.005041] Initializing cgroup subsys freezer [ 0.005050] Initializing cgroup subsys net_cls [ 0.005111] ftrace: allocating 17431 entries in 52 pages [ 0.018571] devtmpfs: initialized [ 0.019614] regulator: core version 0.5 [ 0.019794] NET: Registered protocol family 16 [ 0.020305] MPC7450 family performance monitor hardware support registered [ 0.020378] irq: irq 42 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 42 [ 0.020430] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000 [ 0.020442] channel 0 bus [ 0.020449] channel 1 bus [ 0.020505] irq: irq 26 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 26 [ 0.020536] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000 [ 0.020546] channel 0 bus [ 0.020576] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c [ 0.020585] channel 1 bus [ 0.020592] channel 2 bus [ 0.020685] irq: irq 25 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 25 [ 0.020726] irq: irq 47 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 47 [ 0.021381] PCI: Probing PCI hardware [ 0.021605] pci 0000:00:10.0: reg 10 32bit mmio pref: [0x98000000-0x9fffffff] [ 0.021621] pci 0000:00:10.0: reg 14 io port: [0x400-0x4ff] [ 0.021634] pci 0000:00:10.0: reg 18 32bit mmio: [0x90000000-0x9000ffff] [ 0.021658] pci 0000:00:10.0: reg 30 32bit mmio pref: [0x90020000-0x9003ffff] [ 0.021732] pci 0000:00:10.0: supports D1 D2 [ 0.021810] irq: irq 48 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 48 [ 0.022166] pci 0001:10:12.0: reg 10 32bit mmio: [0x80084000-0x80085fff] [ 0.022218] pci 0001:10:12.0: supports D1 D2 [ 0.022226] pci 0001:10:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.022238] pci 0001:10:12.0: PME# disabled [ 0.022279] pci 0001:10:17.0: reg 10 32bit mmio: [0x80000000-0x8007ffff] [ 0.022344] pci 0001:10:18.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.022412] pci 0001:10:19.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.022490] pci 0001:10:1a.0: reg 10 32bit mmio: [0x80083000-0x80083fff] [ 0.022568] pci 0001:10:1b.0: reg 10 32bit mmio: [0x80082000-0x80082fff] [ 0.022618] pci 0001:10:1b.0: supports D1 D2 [ 0.022626] pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.022637] pci 0001:10:1b.0: PME# disabled [ 0.022682] pci 0001:10:1b.1: reg 10 32bit mmio: [0x80081000-0x80081fff] [ 0.022732] pci 0001:10:1b.1: supports D1 D2 [ 0.022740] pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.022750] pci 0001:10:1b.1: PME# disabled [ 0.022795] pci 0001:10:1b.2: reg 10 32bit mmio: [0x80080000-0x800800ff] [ 0.022845] pci 0001:10:1b.2: supports D1 D2 [ 0.022854] pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.022864] pci 0001:10:1b.2: PME# disabled [ 0.022930] irq: irq 52 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 52 [ 0.022973] irq: irq 27 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 27 [ 0.023012] irq: irq 28 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 28 [ 0.023050] irq: irq 29 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 29 [ 0.023085] irq: irq 63 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 63 [ 0.023911] pci 0002:20:0d.0: reg 10 32bit mmio: [0xf5004000-0xf5007fff] [ 0.023977] pci 0002:20:0e.0: reg 10 32bit mmio: [0xf5000000-0xf5000fff] [ 0.024020] pci 0002:20:0e.0: supports D1 D2 [ 0.024028] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.024038] pci 0002:20:0e.0: PME# disabled [ 0.024069] pci 0002:20:0f.0: reg 10 32bit mmio: [0xf5200000-0xf53fffff] [ 0.024098] pci 0002:20:0f.0: reg 30 32bit mmio pref: [0xf5100000-0xf51fffff] [ 0.024173] irq: irq 39 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 39 [ 0.024208] irq: irq 40 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 40 [ 0.024246] irq: irq 41 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 41 [ 0.024670] PCI 0000:00 Cannot reserve Legacy IO [0x802000-0x802fff] [ 0.024694] pci_bus 0000:00: resource 0 io: [0x802000-0x1001fff] [ 0.024704] pci_bus 0000:00: resource 1 mem: [0xf1000000-0xf1ffffff] [ 0.024714] pci_bus 0000:00: resource 2 mem: [0x90000000-0x9fffffff] [ 0.024725] pci_bus 0001:10: resource 0 io: [0x00-0x7fffff] [ 0.024734] pci_bus 0001:10: resource 1 mem: [0xf3000000-0xf3ffffff] [ 0.024745] pci_bus 0001:10: resource 2 mem: [0x80000000-0x8fffffff] [ 0.024755] pci_bus 0002:20: resource 0 io: [0xff7fe000-0xffffdfff] [ 0.024766] pci_bus 0002:20: resource 1 mem: [0xf5000000-0xf5ffffff] [ 0.027300] bio: create slab at 0 [ 0.027827] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none [ 0.027863] vgaarb: loaded [ 0.028328] SCSI subsystem initialized [ 0.028485] libata version 3.00 loaded. [ 0.028748] usbcore: registered new interface driver usbfs [ 0.028792] usbcore: registered new interface driver hub [ 0.028891] usbcore: registered new device driver usb [ 0.029402] NetLabel: Initializing [ 0.029410] NetLabel: domain hash size = 128 [ 0.029416] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.029466] NetLabel: unlabeled traffic allowed by default [ 0.029480] Switching to clocksource timebase [ 0.035488] AppArmor: AppArmor Filesystem Enabled [ 0.036189] NET: Registered protocol family 2 [ 0.036445] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.037558] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.040046] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 0.040705] TCP: Hash tables configured (established 131072 bind 65536) [ 0.040715] TCP reno registered [ 0.041039] NET: Registered protocol family 1 [ 0.041381] Thermal assist unit not available [ 0.041841] Registering PowerMac CPU frequency driver [ 0.041852] Low: 666 Mhz, High: 1333 Mhz, Boot: 666 Mhz [ 0.042172] Trying to unpack rootfs image as initramfs... [ 0.050143] audit: initializing netlink socket (disabled) [ 0.050191] type=2000 audit(1276505843.036:1): initialized [ 0.081068] VFS: Disk quotas dquot_6.5.2 [ 0.081224] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.081981] fuse init (API version 7.13) [ 0.082230] msgmni has been set to 1484 [ 0.086088] alg: No test for stdrng (krng) [ 0.086243] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.086251] io scheduler noop registered [ 0.086255] io scheduler anticipatory registered [ 0.086259] io scheduler deadline registered [ 0.086363] io scheduler cfq registered (default) [ 0.094345] Generic non-volatile memory driver v1.1 [ 0.094600] radeonfb 0000:00:10.0: enabling device (0006 -> 0007) [ 0.482262] radeonfb 0000:00:10.0: Invalid ROM contents [ 0.482282] radeonfb (0000:00:10.0): Invalid ROM signature 0 should be 0xaa55 [ 0.482294] radeonfb: Retrieved PLL infos from Open Firmware [ 0.482301] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=190.00 Mhz, System=183.00 MHz [ 0.482306] radeonfb: PLL min 12000 max 35000 [ 0.578637] i2c i2c-2: unable to read EDID block. [ 0.596181] Freeing initrd memory: 8792k freed [ 0.730549] i2c i2c-2: unable to read EDID block. [ 0.882536] i2c i2c-2: unable to read EDID block. [ 1.034539] i2c i2c-3: unable to read EDID block. [ 1.186534] i2c i2c-3: unable to read EDID block. [ 1.338534] i2c i2c-3: unable to read EDID block. [ 1.394485] radeonfb: Monitor 1 type LCD found [ 1.394489] radeonfb: EDID probed [ 1.394492] radeonfb: Monitor 2 type no found [ 1.394509] radeonfb: Using Firmware dividers 0x000600ad from PPLL 0 [ 1.533498] radeonfb: Dynamic Clock Power Management enabled [ 1.561013] Console: switching to colour frame buffer device 128x48 [ 1.576544] radeonfb: Backlight initialized (radeonbl0) [ 1.576550] radeonfb (0000:00:10.0): ATI Radeon 5c63 "\c" [ 1.578845] brd: module loaded [ 1.578926] MacIO PCI driver attached to Intrepid chipset [ 1.579227] irq: irq 32 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 32 [ 1.579434] irq: irq 24 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 24 [ 1.579448] irq: irq 12 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 16 [ 1.579508] irq: irq 22 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 22 [ 1.579521] irq: irq 5 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 17 [ 1.579533] irq: irq 6 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 18 [ 1.579610] irq: irq 23 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 23 [ 1.579623] irq: irq 7 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 19 [ 1.579635] irq: irq 8 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 20 [ 1.579936] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 1.580297] Uniform Multi-Platform E-IDE driver [ 1.580540] ide-pmac 0002:20:0d.0: enabling device (0000 -> 0002) [ 1.580669] adb: starting probe task... [ 1.836741] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f [ 1.843297] ADB keyboard at 2, handler 1 [ 1.843314] Detected ADB keyboard, type ISO, swapping keys. [ 1.843422] input: ADB keyboard as /devices/virtual/input/input1 [ 1.843525] input: ADB Powerbook buttons as /devices/virtual/input/input2 [ 1.858583] ADB mouse at 3, handler set to 4 (trackpad) [ 1.917887] input: ADB mouse as /devices/virtual/input/input3 [ 1.917894] adb: finished probe task... [ 2.597503] ide-pmac: Found Apple UniNorth ATA-6 controller (PCI), bus ID 3, irq 39 [ 2.597530] Probing IDE interface ide0... [ 2.885685] hda: TOSHIBA MK6025GAS, ATA DISK drive [ 3.557553] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 3.557606] hda: UDMA/100 mode selected [ 3.557674] ide0 at 0xf1032000-0xf1032070,0xf1032160 on irq 39 [ 4.577502] ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 0, irq 24 [ 4.577519] Probing IDE interface ide1... [ 4.977682] hdc: MATSHITACD-RW CW-8124, ATAPI CD/DVD-ROM drive [ 5.313564] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 5.313698] hdc: MWDMA2 mode selected [ 5.313859] ide1 at 0xf1026000-0xf1026070,0xf1026160 on irq 24 [ 5.313944] ide-gd driver 1.18 [ 5.313984] hda: max request size: 512KiB [ 5.373616] hda: 117210240 sectors (60011 MB), CHS=16383/255/63 [ 5.373707] hda: cache flushes supported [ 5.373862] hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 hda7 hda8 [ 5.389434] ide-cd driver 5.00 [ 5.390016] ide-cd: hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache [ 5.390028] Uniform CD-ROM driver Revision: 3.20 [ 5.402058] Fixed MDIO Bus: probed [ 5.402074] tun: Universal TUN/TAP device driver, 1.6 [ 5.402078] tun: (C) 1999-2004 Max Krasnyansky [ 5.402256] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.402310] ehci_hcd 0001:10:1b.2: enabling device (0004 -> 0006) [ 5.402335] ehci_hcd 0001:10:1b.2: EHCI Host Controller [ 5.402414] ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 1 [ 5.425531] ehci_hcd 0001:10:1b.2: irq 63, io mem 0x80080000 [ 5.437505] ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00 [ 5.437743] usb usb1: configuration #1 chosen from 1 choice [ 5.437810] hub 1-0:1.0: USB hub found [ 5.437833] hub 1-0:1.0: 5 ports detected [ 5.437979] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.438020] Apple USB OHCI 0001:10:18.0 disabled by firmware [ 5.438043] Apple USB OHCI 0001:10:19.0 disabled by firmware [ 5.438063] ohci_hcd 0001:10:1a.0: enabling device (0000 -> 0002) [ 5.438085] ohci_hcd 0001:10:1a.0: OHCI Host Controller [ 5.438192] ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 2 [ 5.438232] ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80083000 [ 5.513220] usb usb2: configuration #1 chosen from 1 choice [ 5.513276] hub 2-0:1.0: USB hub found [ 5.513296] hub 2-0:1.0: 2 ports detected [ 5.513384] ohci_hcd 0001:10:1b.0: enabling device (0000 -> 0002) [ 5.513401] ohci_hcd 0001:10:1b.0: OHCI Host Controller [ 5.513517] ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 3 [ 5.513541] ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000 [ 5.589200] usb usb3: configuration #1 chosen from 1 choice [ 5.589253] hub 3-0:1.0: USB hub found [ 5.589272] hub 3-0:1.0: 3 ports detected [ 5.589354] ohci_hcd 0001:10:1b.1: enabling device (0000 -> 0002) [ 5.589370] ohci_hcd 0001:10:1b.1: OHCI Host Controller [ 5.589458] ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 4 [ 5.589479] ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000 [ 5.661171] usb usb4: configuration #1 chosen from 1 choice [ 5.661222] hub 4-0:1.0: USB hub found [ 5.661244] hub 4-0:1.0: 2 ports detected [ 5.661338] uhci_hcd: USB Universal Host Controller Interface driver [ 5.661834] mice: PS/2 mouse device common for all mice [ 5.661981] PowerMac i2c bus pmu 2 registered [ 5.662021] PowerMac i2c bus pmu 1 registered [ 5.662072] PowerMac i2c bus mac-io 0 registered [ 5.662109] PowerMac i2c bus uni-n 1 registered [ 5.662156] PowerMac i2c bus uni-n 0 registered [ 5.663043] TCP cubic registered [ 5.663053] NET: Registered protocol family 17 [ 5.663342] registered taskstats version 1 [ 5.663741] input: PMU as /devices/virtual/input/input4 [ 5.663807] Registered led device: pmu-led::front [ 5.663816] /build/buildd/linux-2.6.32/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 5.663851] Freeing unused kernel memory: 336k init [ 5.720769] udev: starting version 151 [ 6.114516] usb 3-1: new full speed USB device using ohci_hcd and address 2 [ 6.218238] ohci1394 0002:20:0e.0: enabling device (0000 -> 0002) [ 6.241768] b43-pci-bridge 0001:10:12.0: enabling device (0004 -> 0006) [ 6.246392] ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0 [ 6.275623] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 6.281938] sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com) [ 6.338794] usb 3-1: configuration #1 chosen from 1 choice [ 6.341771] hub 3-1:1.0: USB hub found [ 6.344561] hub 3-1:1.0: 3 ports detected [ 6.349890] PHY ID: 4061e4, addr: 0 [ 6.351130] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:11:24:80:40:ce [ 6.351137] eth0: Found BCM5221 PHY [ 6.513336] EXT4-fs (hda4): INFO: recovery required on readonly filesystem [ 6.513352] EXT4-fs (hda4): write access will be enabled during recovery [ 6.533570] usb 4-1: new low speed USB device using ohci_hcd and address 2 [ 6.748792] usb 4-1: configuration #1 chosen from 1 choice [ 6.781963] hub 3-1:1.0: hub_port_status failed (err = -62) [ 6.794248] hub 3-1:1.0: cannot reset port 1 (err = -62) [ 6.795586] hub 3-1:1.0: cannot reset port 1 (err = -62) [ 6.795693] usbcore: registered new interface driver hiddev [ 6.798530] hub 3-1:1.0: cannot reset port 1 (err = -62) [ 6.801526] hub 3-1:1.0: cannot reset port 1 (err = -62) [ 6.801531] hub 3-1:1.0: Cannot enable port 1. Maybe the USB cable is bad? [ 6.803684] input: Genius 4D Scroll Mouse as /devices/pci0001:10/0001:10:1b.1/usb4/4-1/4-1:1.0/input/input5 [ 6.804136] generic-usb 0003:0458:0088.0001: input,hidraw0: USB HID v1.10 Mouse [Genius 4D Scroll Mouse] on usb-0001:10:1b.1-1/input0 [ 6.804224] usbcore: registered new interface driver usbhid [ 6.804484] usbhid: v2.6:USB HID core driver [ 6.804551] hub 3-1:1.0: cannot disable port 1 (err = -62) [ 6.807575] hub 3-1:1.0: cannot reset port 1 (err = -62) [ 6.810702] hub 3-1:1.0: cannot reset port 1 (err = -62) [ 6.813587] hub 3-1:1.0: cannot reset port 1 (err = -62) [ 6.816521] hub 3-1:1.0: cannot reset port 1 (err = -62) [ 6.819525] hub 3-1:1.0: cannot reset port 1 (err = -62) [ 6.819530] hub 3-1:1.0: Cannot enable port 1. Maybe the USB cable is bad? [ 6.822520] hub 3-1:1.0: cannot disable port 1 (err = -62) [ 6.825525] hub 3-1:1.0: cannot reset port 1 (err = -62) [ 6.828520] hub 3-1:1.0: cannot reset port 1 (err = -62) [ 6.831522] hub 3-1:1.0: cannot reset port 1 (err = -62) [ 6.834521] hub 3-1:1.0: cannot reset port 1 (err = -62) [ 6.837523] hub 3-1:1.0: cannot reset port 1 (err = -62) [ 6.837528] hub 3-1:1.0: Cannot enable port 1. Maybe the USB cable is bad? [ 6.840524] hub 3-1:1.0: cannot disable port 1 (err = -62) [ 6.843523] hub 3-1:1.0: cannot reset port 1 (err = -62) [ 6.846523] hub 3-1:1.0: cannot reset port 1 (err = -62) [ 6.849528] hub 3-1:1.0: cannot reset port 1 (err = -62) [ 6.852520] hub 3-1:1.0: cannot reset port 1 (err = -62) [ 6.855524] hub 3-1:1.0: cannot reset port 1 (err = -62) [ 6.855529] hub 3-1:1.0: Cannot enable port 1. Maybe the USB cable is bad? [ 6.858522] hub 3-1:1.0: cannot disable port 1 (err = -62) [ 6.858530] hub 3-1:1.0: unable to enumerate USB device on port 1 [ 6.861524] hub 3-1:1.0: cannot disable port 1 (err = -62) [ 6.864519] hub 3-1:1.0: hub_port_status failed (err = -62) [ 7.553795] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001124fffe8040ce] [ 7.889524] usb 3-1: reset full speed USB device using ohci_hcd and address 2 [ 8.399530] usb 3-1.1: new full speed USB device using ohci_hcd and address 7 [ 8.514821] usb 3-1.1: configuration #1 chosen from 1 choice [ 8.595536] usb 3-1.3: new full speed USB device using ohci_hcd and address 8 [ 8.714824] usb 3-1.3: configuration #1 chosen from 1 choice [ 8.727193] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:10/0001:10:1b.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input6 [ 8.728130] generic-usb 0003:05AC:020C.0002: input,hidraw1: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:10:1b.0-1.3/input0 [ 8.742449] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:10/0001:10:1b.0/usb3/3-1/3-1.3/3-1.3:1.1/input/input7 [ 8.743325] generic-usb 0003:05AC:020C.0003: input,hidraw2: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:10:1b.0-1.3/input1 [ 11.629791] EXT4-fs (hda4): orphan cleanup on readonly fs [ 11.629821] EXT4-fs (hda4): ext4_orphan_cleanup: deleting unreferenced inode 1049228 [ 11.955620] EXT4-fs (hda4): ext4_orphan_cleanup: deleting unreferenced inode 1047795 [ 11.955769] EXT4-fs (hda4): ext4_orphan_cleanup: deleting unreferenced inode 394142 [ 11.955809] EXT4-fs (hda4): ext4_orphan_cleanup: deleting unreferenced inode 394141 [ 11.955841] EXT4-fs (hda4): ext4_orphan_cleanup: deleting unreferenced inode 394140 [ 11.955879] EXT4-fs (hda4): ext4_orphan_cleanup: deleting unreferenced inode 1049223 [ 11.955910] EXT4-fs (hda4): ext4_orphan_cleanup: deleting unreferenced inode 1049220 [ 11.984105] EXT4-fs (hda4): ext4_orphan_cleanup: deleting unreferenced inode 392959 [ 11.984140] EXT4-fs (hda4): ext4_orphan_cleanup: deleting unreferenced inode 392955 [ 11.984157] EXT4-fs (hda4): ext4_orphan_cleanup: deleting unreferenced inode 392914 [ 11.984175] EXT4-fs (hda4): ext4_orphan_cleanup: deleting unreferenced inode 392896 [ 11.984192] EXT4-fs (hda4): ext4_orphan_cleanup: deleting unreferenced inode 392890 [ 11.984205] EXT4-fs (hda4): 12 orphan inodes deleted [ 11.984212] EXT4-fs (hda4): recovery complete [ 12.033900] EXT4-fs (hda4): mounted filesystem with ordered data mode [ 30.314023] Adding 1160184k swap on /dev/hda5. Priority:-1 extents:1 across:1160184k [ 30.421018] udev: starting version 151 [ 30.975894] Linux agpgart interface v0.103 [ 31.133696] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset [ 31.135004] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64 [ 31.135187] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0 [ 31.224378] pmac_zilog: 0.6 (Benjamin Herrenschmidt ) [ 31.224545] ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port [ 31.224761] ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port [ 31.237875] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 [ 31.483832] usbcore: registered new interface driver usbserial [ 31.484436] USB Serial support registered for generic [ 31.523761] usbcore: registered new interface driver usbserial_generic [ 31.523774] usbserial: USB Serial Driver core [ 31.769832] type=1505 audit(1276505874.755:2): operation="profile_load" pid=448 name="/sbin/dhclient3" [ 31.770462] type=1505 audit(1276505874.755:3): operation="profile_load" pid=448 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 31.770805] type=1505 audit(1276505874.755:4): operation="profile_load" pid=448 name="/usr/lib/connman/scripts/dhclient-script" [ 31.830624] cfg80211: Calling CRDA to update world regulatory domain [ 31.967973] cfg80211: World regulatory domain updated: [ 31.967988] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 31.967996] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.968001] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 31.968006] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 31.968012] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.968017] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 32.074939] USB Serial support registered for pl2303 [ 32.075861] pl2303 3-1.1:1.0: pl2303 converter detected [ 32.137892] usb 3-1.1: pl2303 converter now attached to ttyUSB0 [ 32.137956] usbcore: registered new interface driver pl2303 [ 32.137961] pl2303: Prolific PL2303 USB to serial adaptor driver [ 32.372268] b43-phy0: Broadcom 4306 WLAN found (core revision 5) [ 32.907126] phy0: Selected rate control algorithm 'minstrel' [ 32.907877] Registered led device: b43-phy0::tx [ 32.907912] Registered led device: b43-phy0::rx [ 32.907943] Registered led device: b43-phy0::radio [ 32.908138] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] [ 33.113199] type=1505 audit(1276505876.095:5): operation="profile_load" pid=578 name="/usr/share/gdm/guest-session/Xsession" [ 33.181740] type=1505 audit(1276505876.167:6): operation="profile_replace" pid=579 name="/sbin/dhclient3" [ 33.182504] type=1505 audit(1276505876.167:7): operation="profile_replace" pid=579 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 33.182873] type=1505 audit(1276505876.167:8): operation="profile_replace" pid=579 name="/usr/lib/connman/scripts/dhclient-script" [ 33.242406] type=1505 audit(1276505876.228:9): operation="profile_load" pid=582 name="/usr/bin/evince" [ 33.301088] type=1505 audit(1276505876.283:10): operation="profile_load" pid=582 name="/usr/bin/evince-previewer" [ 33.351945] type=1505 audit(1276505876.335:11): operation="profile_load" pid=582 name="/usr/bin/evince-thumbnailer" [ 33.583872] NET: Registered protocol family 10 [ 33.584661] lo: Disabled Privacy Extensions [ 33.953208] irq: irq 1 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 21 [ 33.953252] irq: irq 2 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 30 [ 33.979677] irq: irq 61 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 61 [ 34.402167] input: PowerMac Beep as /devices/pci0001:10/0001:10:17.0/input/input8 [ 34.555350] apm_emu: PMU APM Emulation initialized. [ 35.056805] radeonfb 0000:00:10.0: Invalid ROM contents [ 35.056951] radeonfb 0000:00:10.0: Invalid ROM contents [ 35.147481] [drm] Initialized drm 1.1.0 20060810 [ 35.395110] [drm] radeon defaulting to kernel modesetting. [ 35.395124] [drm] radeon kernel modesetting enabled. [ 35.572789] hda: host max PIO4 wanted PIO0 selected PIO0 [ 35.609078] lp: driver loaded but no devices found [ 35.641150] ppdev: user-space parallel port driver [ 96.360119] ondemand governor failed, too long transition latency of HW, fallback to performance governor [ 3891.313655] b43 ssb0:0: firmware: requesting b43/ucode5.fw [ 3891.327614] b43 ssb0:0: firmware: requesting b43/pcm5.fw [ 3891.344907] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw [ 3891.364345] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw [ 3891.493552] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 3891.551930] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3891.574142] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3899.205700] wlan0: deauthenticating from 00:24:fe:a9:a7:fb by local choice (reason=3) [ 3899.206378] wlan0: direct probe to AP 00:24:fe:a9:a7:fb (try 1) [ 3899.212366] wlan0: direct probe responded [ 3899.212384] wlan0: authenticate with AP 00:24:fe:a9:a7:fb (try 1) [ 3899.216963] wlan0: authenticated [ 3899.217037] wlan0: associate with AP 00:24:fe:a9:a7:fb (try 1) [ 3899.220836] wlan0: RX AssocResp from 00:24:fe:a9:a7:fb (capab=0x431 status=0 aid=4) [ 3899.220850] wlan0: associated [ 3899.224730] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 3909.413515] wlan0: no IPv6 routers present