[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-8-generic (buildd@vernadsky) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu1) ) #41-Ubuntu SMP Tue Apr 5 19:29:52 UTC 2011 (Ubuntu 2.6.38-8.41-generic 2.6.38.2) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfea0000 (usable) [ 0.000000] BIOS-e820: 00000000bfea0000 - 00000000bfebc000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfebc000 - 00000000bfebe000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfebe000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel! [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits [ 0.000000] DMI present. [ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. R425/R525 /R425/R525 , BIOS 02NS 01/30/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0xbfea0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DEFFF uncachable [ 0.000000] DF000-DFFFF write-back [ 0.000000] E0000-E3FFF uncachable [ 0.000000] E4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00f8080] f8080 [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000 [ 0.000000] RAMDISK: 36778000 - 373b4000 [ 0.000000] ACPI: RSDP 000f7ff0 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT bfeafe61 0005C (v01 SECCSD LH43STAR 06040000 LTP 00000000) [ 0.000000] ACPI: FACP bfebb6f4 000F4 (v03 SEC MAGIC 06040000 ATI 000F4240) [ 0.000000] ACPI: DSDT bfeafebd 0B837 (v01 ATI SB700 06040000 MSFT 03000001) [ 0.000000] ACPI: FACS bfebdfc0 00040 [ 0.000000] ACPI: TCPA bfebb85c 00032 (v02 AMD 06040000 PTEC 00000000) [ 0.000000] ACPI: SSDT bfebb88e 0052A (v01 AMD POWERNOW 06040000 AMD 00000001) [ 0.000000] ACPI: SLIC bfebbdb8 00176 (v01 SECCSD LH43STAR 06040000 LTP 00000000) [ 0.000000] ACPI: APIC bfebbf2e 0005E (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: MCFG bfebbf8c 0003C (v01 PTLTD MCFG 06040000 LTP 00000000) [ 0.000000] ACPI: HPET bfebbfc8 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2182MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000bfea0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x000bfea0 [ 0.000000] On node 0 totalpages: 785965 [ 0.000000] free_area_init_node: node 0, pgdat c1784100, node_mem_map f4f78200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3949 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4366 pages used for memmap [ 0.000000] HighMem zone: 554388 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000 [ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f4800000 s28800 r0 d24448 u2097152 [ 0.000000] pcpu-alloc: s28800 r0 d24448 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779823 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=718a009c-8098-43de-964a-6e9011f82ab5 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 15721280 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000bfea0) [ 0.000000] Memory: 3081060k/3144320k available (5188k kernel code, 62800k reserved, 2540k data, 700k init, 2235016k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc178d000 - 0xc183c000 ( 700 kB) [ 0.000000] .data : 0xc15112d1 - 0xc178c480 (2540 kB) [ 0.000000] .text : 0xc1000000 - 0xc15112d1 (5188 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=f3408000 soft=f340a000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2194.320 MHz processor. [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.64 BogoMIPS (lpj=8777280) [ 0.004009] pid_max: default: 32768 minimum: 301 [ 0.004036] Security Framework initialized [ 0.004055] AppArmor: AppArmor initialized [ 0.004057] Yama: becoming mindful. [ 0.004123] Mount-cache hash table entries: 512 [ 0.004253] Initializing cgroup subsys ns [ 0.004257] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.004262] Initializing cgroup subsys cpuacct [ 0.004267] Initializing cgroup subsys memory [ 0.004277] Initializing cgroup subsys devices [ 0.004280] Initializing cgroup subsys freezer [ 0.004283] Initializing cgroup subsys net_cls [ 0.004286] Initializing cgroup subsys blkio [ 0.004317] CPU: Physical Processor ID: 0 [ 0.004320] CPU: Processor Core ID: 0 [ 0.004323] mce: CPU supports 6 MCE banks [ 0.004332] using C1E aware idle routine [ 0.009769] ACPI: Core revision 20110112 [ 0.020030] ftrace: allocating 23640 entries in 47 pages [ 0.024072] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.024404] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.067705] CPU0: AMD Turion(tm) II Dual-Core Mobile M500 stepping 02 [ 0.068003] Performance Events: AMD PMU driver. [ 0.068003] ... version: 0 [ 0.068003] ... bit width: 48 [ 0.068003] ... generic registers: 4 [ 0.068003] ... value mask: 0000ffffffffffff [ 0.068003] ... max period: 00007fffffffffff [ 0.068003] ... fixed-purpose events: 0 [ 0.068003] ... event mask: 000000000000000f [ 0.068003] CPU 1 irqstacks, hard=f34ca000 soft=f34cc000 [ 0.068003] Booting Node 0, Processors #1 Ok. [ 0.008000] Initializing CPU#1 [ 0.156019] Brought up 2 CPUs [ 0.156021] Total of 2 processors activated (8777.67 BogoMIPS). [ 0.156021] System has AMD C1E enabled [ 0.156056] Switch to broadcast mode on CPU1 [ 0.156255] Switch to broadcast mode on CPU0 [ 0.156255] devtmpfs: initialized [ 0.157127] print_constraints: dummy: [ 0.157185] Time: 18:52:50 Date: 04/07/11 [ 0.157218] NET: Registered protocol family 16 [ 0.157307] EISA bus registered [ 0.157312] node 0 link 0: io port [1000, ffff] [ 0.157315] TOM: 00000000c0000000 aka 3072M [ 0.157317] Fam 10h mmconf [e0000000, efffffff] [ 0.157320] node 0 link 0: mmio [a0000, bffff] [ 0.157323] node 0 link 0: mmio [c0000000, dfffffff] [ 0.157326] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.157329] node 0 link 0: mmio [f0000000, ffffffff] [ 0.157331] bus: [00, ff] on node 0 link 0 [ 0.157229] Trying to unpack rootfs image as initramfs... [ 0.157338] bus: 00 index 0 [io 0x0000-0xffff] [ 0.157341] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.157343] bus: 00 index 2 [mem 0xc0000000-0xdfffffff] [ 0.157345] bus: 00 index 3 [mem 0xf0000000-0xffffffff] [ 0.157389] Extended Config Space enabled on 1 nodes [ 0.157396] ACPI: bus type pci registered [ 0.157494] PCI: MMCONFIG for domain 0000 [bus 00-04] at [mem 0xe0000000-0xe04fffff] (base 0xe0000000) [ 0.157498] PCI: MMCONFIG at [mem 0xe0000000-0xe04fffff] reserved in E820 [ 0.157500] PCI: Using MMCONFIG for extended config space [ 0.157501] PCI: Using configuration type 1 for base access [ 0.157524] mtrr: your CPUs had inconsistent fixed MTRR settings [ 0.157525] mtrr: probably your BIOS does not setup all CPUs. [ 0.157527] mtrr: corrected configuration. [ 0.158293] bio: create slab at 0 [ 0.158392] ACPI: EC: Look up EC in DSDT [ 0.159488] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.192758] ACPI: OEML bfebc313 00754 (v01 AMD LGHP 00000001 MSFT 03000001) [ 0.193126] ACPI: Dynamic OEM Table Load: [ 0.193129] ACPI: OEML (null) 00754 (v01 AMD LGHP 00000001 MSFT 03000001) [ 0.193534] ACPI: Interpreter enabled [ 0.193540] ACPI: (supports S0 S3 S4 S5) [ 0.193557] ACPI: Using IOAPIC for interrupt routing [ 0.194009] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.197356] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.200438] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62 [ 0.240174] ACPI: No dock devices found. [ 0.240178] HEST: Table not found. [ 0.240183] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.240859] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.242068] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.242072] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d1fff] [ 0.242074] pci_root PNP0A08:00: host bridge window [mem 0x000d2000-0x000d3fff] [ 0.242077] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d5fff] [ 0.242079] pci_root PNP0A08:00: host bridge window [mem 0x000d6000-0x000d7fff] [ 0.242082] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000d9fff] [ 0.242084] pci_root PNP0A08:00: host bridge window [mem 0x000da000-0x000dbfff] [ 0.242087] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000ddfff] [ 0.242090] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] [ 0.242093] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff] [ 0.242095] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.242098] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.242115] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600 [ 0.242195] pci 0000:00:02.0: [1022:9603] type 1 class 0x000604 [ 0.242223] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.242226] pci 0000:00:02.0: PME# disabled [ 0.242278] pci 0000:00:04.0: [1022:9604] type 1 class 0x000604 [ 0.242306] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.242308] pci 0000:00:04.0: PME# disabled [ 0.242322] pci 0000:00:05.0: [1022:9605] type 1 class 0x000604 [ 0.242348] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.242351] pci 0000:00:05.0: PME# disabled [ 0.242364] pci 0000:00:06.0: [1022:9606] type 1 class 0x000604 [ 0.242391] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.242394] pci 0000:00:06.0: PME# disabled [ 0.242459] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106 [ 0.242480] pci 0000:00:11.0: reg 10: [io 0x8420-0x8427] [ 0.242490] pci 0000:00:11.0: reg 14: [io 0x8414-0x8417] [ 0.242500] pci 0000:00:11.0: reg 18: [io 0x8418-0x841f] [ 0.242511] pci 0000:00:11.0: reg 1c: [io 0x8410-0x8413] [ 0.242521] pci 0000:00:11.0: reg 20: [io 0x8400-0x840f] [ 0.242531] pci 0000:00:11.0: reg 24: [mem 0xf0409000-0xf04093ff] [ 0.242577] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 [ 0.242591] pci 0000:00:12.0: reg 10: [mem 0xf0404000-0xf0404fff] [ 0.242656] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03 [ 0.242670] pci 0000:00:12.1: reg 10: [mem 0xf0405000-0xf0405fff] [ 0.242741] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 [ 0.242761] pci 0000:00:12.2: reg 10: [mem 0xf0409400-0xf04094ff] [ 0.242833] pci 0000:00:12.2: supports D1 D2 [ 0.242835] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.242839] pci 0000:00:12.2: PME# disabled [ 0.242861] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 [ 0.242875] pci 0000:00:13.0: reg 10: [mem 0xf0406000-0xf0406fff] [ 0.242940] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03 [ 0.242954] pci 0000:00:13.1: reg 10: [mem 0xf0407000-0xf0407fff] [ 0.243024] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 [ 0.243044] pci 0000:00:13.2: reg 10: [mem 0xf0409800-0xf04098ff] [ 0.243116] pci 0000:00:13.2: supports D1 D2 [ 0.243118] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.243123] pci 0000:00:13.2: PME# disabled [ 0.243147] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.243245] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 0.243267] pci 0000:00:14.2: reg 10: [mem 0xf0400000-0xf0403fff 64bit] [ 0.243326] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.243331] pci 0000:00:14.2: PME# disabled [ 0.243344] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 [ 0.243420] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.243461] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 [ 0.243475] pci 0000:00:14.5: reg 10: [mem 0xf0408000-0xf0408fff] [ 0.243543] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600 [ 0.243559] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600 [ 0.243573] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600 [ 0.243587] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600 [ 0.243603] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600 [ 0.243690] pci 0000:01:00.0: [1002:9553] type 0 class 0x000300 [ 0.243700] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref] [ 0.243708] pci 0000:01:00.0: reg 14: [io 0x9000-0x90ff] [ 0.243716] pci 0000:01:00.0: reg 18: [mem 0xcfef0000-0xcfefffff] [ 0.243739] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.243756] pci 0000:01:00.0: supports D1 D2 [ 0.243775] pci 0000:01:00.1: [1002:aa38] type 0 class 0x000403 [ 0.243785] pci 0000:01:00.1: reg 10: [mem 0xcfeec000-0xcfeeffff] [ 0.243833] pci 0000:01:00.1: supports D1 D2 [ 0.248055] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.248062] pci 0000:00:02.0: bridge window [io 0x9000-0x9fff] [ 0.248066] pci 0000:00:02.0: bridge window [mem 0xcfe00000-0xcfefffff] [ 0.248070] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.248114] pci 0000:02:00.0: [168c:002b] type 0 class 0x000280 [ 0.248134] pci 0000:02:00.0: reg 10: [mem 0xf0200000-0xf020ffff 64bit] [ 0.248199] pci 0000:02:00.0: supports D1 [ 0.248201] pci 0000:02:00.0: PME# supported from D0 D1 D3hot [ 0.248205] pci 0000:02:00.0: PME# disabled [ 0.256051] pci 0000:00:04.0: PCI bridge to [bus 02-02] [ 0.256058] pci 0000:00:04.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.256062] pci 0000:00:04.0: bridge window [mem 0xf0200000-0xf02fffff] [ 0.256066] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.256096] pci 0000:00:05.0: PCI bridge to [bus 03-03] [ 0.256100] pci 0000:00:05.0: bridge window [io 0x0000-0x0000] (disabled) [ 0.256104] pci 0000:00:05.0: bridge window [mem 0x00000000-0x000fffff] (disabled) [ 0.256108] pci 0000:00:05.0: bridge window [mem 0x00000000-0x000fffff pref] (disabled) [ 0.256217] pci 0000:04:00.0: [11ab:4354] type 0 class 0x000200 [ 0.256262] pci 0000:04:00.0: reg 10: [mem 0xf0300000-0xf0303fff 64bit] [ 0.256274] pci 0000:04:00.0: reg 18: [io 0xa000-0xa0ff] [ 0.256349] pci 0000:04:00.0: supports D1 D2 [ 0.256351] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.256371] pci 0000:04:00.0: PME# disabled [ 0.264119] pci 0000:00:06.0: PCI bridge to [bus 04-04] [ 0.264125] pci 0000:00:06.0: bridge window [io 0xa000-0xafff] [ 0.264128] pci 0000:00:06.0: bridge window [mem 0xf0300000-0xf03fffff] [ 0.264133] pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.264234] pci 0000:00:14.4: PCI bridge to [bus 05-05] (subtractive decode) [ 0.264239] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled) [ 0.264244] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.264248] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.264252] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.264254] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d1fff] (subtractive decode) [ 0.264257] pci 0000:00:14.4: bridge window [mem 0x000d2000-0x000d3fff] (subtractive decode) [ 0.264259] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d5fff] (subtractive decode) [ 0.264262] pci 0000:00:14.4: bridge window [mem 0x000d6000-0x000d7fff] (subtractive decode) [ 0.264264] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000d9fff] (subtractive decode) [ 0.264267] pci 0000:00:14.4: bridge window [mem 0x000da000-0x000dbfff] (subtractive decode) [ 0.264270] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000ddfff] (subtractive decode) [ 0.264272] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode) [ 0.264275] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode) [ 0.264277] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.264280] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.264296] pci_bus 0000:00: on NUMA node 0 [ 0.264303] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.264477] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2_._PRT] [ 0.264531] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT] [ 0.264573] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT] [ 0.264611] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT] [ 0.264691] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.264787] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.268859] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. [ 0.268898] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. [ 0.268934] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. [ 0.268968] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. [ 0.269002] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. [ 0.269036] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. [ 0.269070] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. [ 0.269104] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. [ 0.269200] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.269204] vgaarb: loaded [ 0.269377] SCSI subsystem initialized [ 0.272016] libata version 3.00 loaded. [ 0.272016] usbcore: registered new interface driver usbfs [ 0.272016] usbcore: registered new interface driver hub [ 0.272016] usbcore: registered new device driver usb [ 0.272016] wmi: Mapper loaded [ 0.272016] PCI: Using ACPI for IRQ routing [ 0.272016] PCI: pci_cache_line_size set to 64 bytes [ 0.272016] reserve RAM buffer: 000000000009dc00 - 000000000009ffff [ 0.272016] reserve RAM buffer: 00000000bfea0000 - 00000000bfffffff [ 0.272016] NetLabel: Initializing [ 0.272016] NetLabel: domain hash size = 128 [ 0.272016] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.272016] NetLabel: unlabeled traffic allowed by default [ 0.272016] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.272016] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.272042] Switching to clocksource hpet [ 0.279958] Switched to NOHz mode on CPU #1 [ 0.279962] Switched to NOHz mode on CPU #0 [ 0.282051] AppArmor: AppArmor Filesystem Enabled [ 0.282078] pnp: PnP ACPI init [ 0.282096] ACPI: bus type pnp registered [ 0.282748] pnp 00:00: [bus 00-ff] [ 0.282751] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.282753] pnp 00:00: [mem 0x000c0000-0x000c1fff window] [ 0.282756] pnp 00:00: [mem 0x000c2000-0x000c3fff window] [ 0.282758] pnp 00:00: [mem 0x000c4000-0x000c5fff window] [ 0.282760] pnp 00:00: [mem 0x000c6000-0x000c7fff window] [ 0.282762] pnp 00:00: [mem 0x000c8000-0x000c9fff window] [ 0.282765] pnp 00:00: [mem 0x000ca000-0x000cbfff window] [ 0.282767] pnp 00:00: [mem 0x000cc000-0x000cdfff window] [ 0.282769] pnp 00:00: [mem 0x000ce000-0x000cffff window] [ 0.282771] pnp 00:00: [mem 0x000d0000-0x000d1fff window] [ 0.282773] pnp 00:00: [mem 0x000d2000-0x000d3fff window] [ 0.282777] pnp 00:00: [mem 0x000d4000-0x000d5fff window] [ 0.282779] pnp 00:00: [mem 0x000d6000-0x000d7fff window] [ 0.282781] pnp 00:00: [mem 0x000d8000-0x000d9fff window] [ 0.282783] pnp 00:00: [mem 0x000da000-0x000dbfff window] [ 0.282785] pnp 00:00: [mem 0x000dc000-0x000ddfff window] [ 0.282788] pnp 00:00: [mem 0x000de000-0x000dffff window] [ 0.282790] pnp 00:00: [mem 0x000e0000-0x000e1fff window] [ 0.282792] pnp 00:00: [mem 0x000e2000-0x000e3fff window] [ 0.282794] pnp 00:00: [mem 0x000e4000-0x000e5fff window] [ 0.282796] pnp 00:00: [mem 0x000e6000-0x000e7fff window] [ 0.282799] pnp 00:00: [mem 0x000e8000-0x000e9fff window] [ 0.282801] pnp 00:00: [mem 0x000ea000-0x000ebfff window] [ 0.282803] pnp 00:00: [mem 0x000ec000-0x000edfff window] [ 0.282805] pnp 00:00: [mem 0x000ee000-0x000effff window] [ 0.282808] pnp 00:00: [mem 0xc0000000-0xdfffffff window] [ 0.282810] pnp 00:00: [mem 0xf0000000-0xffffffff window] [ 0.282813] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.282815] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.282817] pnp 00:00: [io 0x0d00-0xffff window] [ 0.282882] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.282922] pnp 00:01: [io 0x0f50-0x0f51] [ 0.282924] pnp 00:01: [mem 0xfec00000-0xfec00fff] [ 0.282927] pnp 00:01: [mem 0xfee00000-0xfee00fff] [ 0.282978] system 00:01: [io 0x0f50-0x0f51] has been reserved [ 0.282982] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.282985] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.282988] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.283358] pnp 00:02: [io 0x0000-0x001f] [ 0.283360] pnp 00:02: [io 0x0080-0x008f] [ 0.283362] pnp 00:02: [io 0x00c0-0x00df] [ 0.283364] pnp 00:02: [dma 4] [ 0.283399] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.283407] pnp 00:03: [io 0x00f0-0x00fe] [ 0.283452] pnp 00:03: [irq 13] [ 0.283487] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.283496] pnp 00:04: [io 0x0070-0x0071] [ 0.283536] pnp 00:04: [irq 8] [ 0.283569] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.283576] pnp 00:05: [io 0x0061] [ 0.283610] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.283619] pnp 00:06: [io 0x0060] [ 0.283621] pnp 00:06: [io 0x0064] [ 0.283658] pnp 00:06: [irq 1] [ 0.283692] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.283743] pnp 00:07: [irq 12] [ 0.283779] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.283792] pnp 00:08: [io 0x0022-0x0023] [ 0.283794] pnp 00:08: [io 0x002e-0x002f] [ 0.283796] pnp 00:08: [io 0x0072-0x0073] [ 0.283798] pnp 00:08: [io 0x0080-0x0081] [ 0.283800] pnp 00:08: [io 0x00b0-0x00b1] [ 0.283801] pnp 00:08: [io 0x00b8] [ 0.283803] pnp 00:08: [io 0x0092] [ 0.283805] pnp 00:08: [io 0x0220-0x022f] [ 0.283807] pnp 00:08: [io 0x040b] [ 0.283809] pnp 00:08: [io 0x04d0-0x04d1] [ 0.283810] pnp 00:08: [io 0x04d6] [ 0.283812] pnp 00:08: [io 0x0530-0x0537] [ 0.283814] pnp 00:08: [io 0x0c00-0x0c01] [ 0.283816] pnp 00:08: [io 0x0c14] [ 0.283818] pnp 00:08: [io 0x0c50-0x0c52] [ 0.283819] pnp 00:08: [io 0x0c6c] [ 0.283821] pnp 00:08: [io 0x0c6f] [ 0.283823] pnp 00:08: [io 0x0cd0-0x0cd1] [ 0.283825] pnp 00:08: [io 0x0cd2-0x0cd3] [ 0.283827] pnp 00:08: [io 0x0cd4-0x0cd5] [ 0.283828] pnp 00:08: [io 0x0cd6-0x0cd7] [ 0.283830] pnp 00:08: [io 0x0cd8-0x0cdf] [ 0.283832] pnp 00:08: [io 0x8000-0x805f] [ 0.283834] pnp 00:08: [io 0x8100-0x81ff window] [ 0.283836] pnp 00:08: [io 0x8200-0x82ff window] [ 0.283838] pnp 00:08: [io 0x0f40-0x0f47] [ 0.283840] pnp 00:08: [io 0x087f] [ 0.283907] system 00:08: [io 0x0220-0x022f] has been reserved [ 0.283910] system 00:08: [io 0x040b] has been reserved [ 0.283912] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.283915] system 00:08: [io 0x04d6] has been reserved [ 0.283917] system 00:08: [io 0x0530-0x0537] has been reserved [ 0.283920] system 00:08: [io 0x0c00-0x0c01] has been reserved [ 0.283922] system 00:08: [io 0x0c14] has been reserved [ 0.283925] system 00:08: [io 0x0c50-0x0c52] has been reserved [ 0.283927] system 00:08: [io 0x0c6c] has been reserved [ 0.283930] system 00:08: [io 0x0c6f] has been reserved [ 0.283932] system 00:08: [io 0x0cd0-0x0cd1] has been reserved [ 0.283935] system 00:08: [io 0x0cd2-0x0cd3] has been reserved [ 0.283937] system 00:08: [io 0x0cd4-0x0cd5] has been reserved [ 0.283940] system 00:08: [io 0x0cd6-0x0cd7] has been reserved [ 0.283942] system 00:08: [io 0x0cd8-0x0cdf] has been reserved [ 0.283945] system 00:08: [io 0x8000-0x805f] has been reserved [ 0.283947] system 00:08: [io 0x8100-0x81ff window] has been reserved [ 0.283950] system 00:08: [io 0x8200-0x82ff window] has been reserved [ 0.283953] system 00:08: [io 0x0f40-0x0f47] has been reserved [ 0.283955] system 00:08: [io 0x087f] has been reserved [ 0.283958] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.284083] pnp 00:09: [mem 0x000e0000-0x000fffff] [ 0.284085] pnp 00:09: [mem 0xffe00000-0xffffffff] [ 0.284089] pnp 00:09: [mem 0x00000000-0xffffffff disabled] [ 0.284091] pnp 00:09: [mem 0xfec10000-0xfec1001f] [ 0.284149] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.284153] system 00:09: [mem 0xffe00000-0xffffffff] could not be reserved [ 0.284156] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.284159] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.284267] pnp 00:0a: [mem 0xfed00000-0xfed003ff] [ 0.284307] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.285016] pnp: PnP ACPI: found 11 devices [ 0.285020] ACPI: ACPI bus type pnp unregistered [ 0.285024] PnPBIOS: Disabled by ACPI PNP [ 0.321458] pci 0000:00:05.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff] [ 0.321463] pci 0000:00:05.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref] [ 0.321468] pci 0000:00:05.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.321472] pci 0000:01:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe1ffff pref] [ 0.321476] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.321478] pci 0000:00:02.0: bridge window [io 0x9000-0x9fff] [ 0.321482] pci 0000:00:02.0: bridge window [mem 0xcfe00000-0xcfefffff] [ 0.321486] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.321490] pci 0000:00:04.0: PCI bridge to [bus 02-02] [ 0.321492] pci 0000:00:04.0: bridge window [io disabled] [ 0.321495] pci 0000:00:04.0: bridge window [mem 0xf0200000-0xf02fffff] [ 0.321498] pci 0000:00:04.0: bridge window [mem pref disabled] [ 0.321501] pci 0000:00:05.0: PCI bridge to [bus 03-03] [ 0.321504] pci 0000:00:05.0: bridge window [io 0x1000-0x1fff] [ 0.321507] pci 0000:00:05.0: bridge window [mem 0xc0000000-0xc01fffff] [ 0.321510] pci 0000:00:05.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref] [ 0.321514] pci 0000:00:06.0: PCI bridge to [bus 04-04] [ 0.321517] pci 0000:00:06.0: bridge window [io 0xa000-0xafff] [ 0.321520] pci 0000:00:06.0: bridge window [mem 0xf0300000-0xf03fffff] [ 0.321523] pci 0000:00:06.0: bridge window [mem pref disabled] [ 0.321526] pci 0000:00:14.4: PCI bridge to [bus 05-05] [ 0.321528] pci 0000:00:14.4: bridge window [io disabled] [ 0.321567] pci 0000:00:14.4: bridge window [mem disabled] [ 0.321571] pci 0000:00:14.4: bridge window [mem pref disabled] [ 0.321589] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.321593] pci 0000:00:02.0: setting latency timer to 64 [ 0.321600] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.321603] pci 0000:00:04.0: setting latency timer to 64 [ 0.321607] pci 0000:00:05.0: enabling device (0000 -> 0003) [ 0.321612] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.321615] pci 0000:00:05.0: setting latency timer to 64 [ 0.321620] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.321623] pci 0000:00:06.0: setting latency timer to 64 [ 0.321631] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff] [ 0.321633] pci_bus 0000:00: resource 5 [mem 0x000d0000-0x000d1fff] [ 0.321635] pci_bus 0000:00: resource 6 [mem 0x000d2000-0x000d3fff] [ 0.321638] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d5fff] [ 0.321640] pci_bus 0000:00: resource 8 [mem 0x000d6000-0x000d7fff] [ 0.321642] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000d9fff] [ 0.321644] pci_bus 0000:00: resource 10 [mem 0x000da000-0x000dbfff] [ 0.321647] pci_bus 0000:00: resource 11 [mem 0x000dc000-0x000ddfff] [ 0.321649] pci_bus 0000:00: resource 12 [mem 0xc0000000-0xdfffffff] [ 0.321651] pci_bus 0000:00: resource 13 [mem 0xf0000000-0xffffffff] [ 0.321654] pci_bus 0000:00: resource 14 [io 0x0000-0x0cf7] [ 0.321656] pci_bus 0000:00: resource 15 [io 0x0d00-0xffff] [ 0.321658] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff] [ 0.321661] pci_bus 0000:01: resource 1 [mem 0xcfe00000-0xcfefffff] [ 0.321663] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.321666] pci_bus 0000:02: resource 1 [mem 0xf0200000-0xf02fffff] [ 0.321668] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] [ 0.321670] pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc01fffff] [ 0.321673] pci_bus 0000:03: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref] [ 0.321675] pci_bus 0000:04: resource 0 [io 0xa000-0xafff] [ 0.321677] pci_bus 0000:04: resource 1 [mem 0xf0300000-0xf03fffff] [ 0.321680] pci_bus 0000:05: resource 4 [mem 0x000a0000-0x000bffff] [ 0.321682] pci_bus 0000:05: resource 5 [mem 0x000d0000-0x000d1fff] [ 0.321684] pci_bus 0000:05: resource 6 [mem 0x000d2000-0x000d3fff] [ 0.321687] pci_bus 0000:05: resource 7 [mem 0x000d4000-0x000d5fff] [ 0.321689] pci_bus 0000:05: resource 8 [mem 0x000d6000-0x000d7fff] [ 0.321691] pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000d9fff] [ 0.321694] pci_bus 0000:05: resource 10 [mem 0x000da000-0x000dbfff] [ 0.321696] pci_bus 0000:05: resource 11 [mem 0x000dc000-0x000ddfff] [ 0.321698] pci_bus 0000:05: resource 12 [mem 0xc0000000-0xdfffffff] [ 0.321701] pci_bus 0000:05: resource 13 [mem 0xf0000000-0xffffffff] [ 0.321703] pci_bus 0000:05: resource 14 [io 0x0000-0x0cf7] [ 0.321705] pci_bus 0000:05: resource 15 [io 0x0d00-0xffff] [ 0.321739] NET: Registered protocol family 2 [ 0.321797] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.321996] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.322489] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.322727] TCP: Hash tables configured (established 131072 bind 65536) [ 0.322729] TCP reno registered [ 0.322732] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.322741] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.322823] NET: Registered protocol family 1 [ 0.322974] pci 0000:01:00.0: Boot video device [ 0.323033] PCI: CLS 32 bytes, default 64 [ 0.323307] cpufreq-nforce2: No nForce2 chipset. [ 0.323419] audit: initializing netlink socket (disabled) [ 0.323428] type=2000 audit(1302202369.316:1): initialized [ 0.333209] highmem bounce pool size: 64 pages [ 0.333214] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.334841] VFS: Disk quotas dquot_6.5.2 [ 0.334897] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.335540] fuse init (API version 7.16) [ 0.335623] msgmni has been set to 1652 [ 0.335865] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.335920] io scheduler noop registered [ 0.335922] io scheduler deadline registered [ 0.335938] io scheduler cfq registered (default) [ 0.336106] pcieport 0000:00:02.0: setting latency timer to 64 [ 0.336136] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X [ 0.336180] pcieport 0000:00:04.0: setting latency timer to 64 [ 0.336203] pcieport 0000:00:04.0: irq 41 for MSI/MSI-X [ 0.336242] pcieport 0000:00:05.0: setting latency timer to 64 [ 0.336264] pcieport 0000:00:05.0: irq 42 for MSI/MSI-X [ 0.336303] pcieport 0000:00:06.0: setting latency timer to 64 [ 0.336325] pcieport 0000:00:06.0: irq 43 for MSI/MSI-X [ 0.336388] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.336409] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.336849] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.337240] ACPI: AC Adapter [ACAD] (off-line) [ 0.337319] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.384089] ACPI: Power Button [PWRB] [ 0.384177] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.384182] ACPI: Sleep Button [SLPB] [ 0.384229] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 0.385271] ACPI: Lid Switch [LID] [ 0.385342] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.385347] ACPI: Power Button [PWRF] [ 0.385533] ACPI: acpi_idle registered with cpuidle [ 0.385553] ACPI: processor limited to max C-state 1 [ 0.387896] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.387900] ACPI: Thermal Zone [THZ0] (44 C) [ 0.387944] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.388078] ERST: Table is not found! [ 0.388163] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.388365] isapnp: Scanning for PnP cards... [ 0.457289] Freeing initrd memory: 12528k freed [ 0.496241] ACPI: Battery Slot [BATT] (battery present) [ 0.771905] isapnp: No Plug & Play device found [ 0.996583] Linux agpgart interface v0.103 [ 0.997927] brd: module loaded [ 0.998424] loop: module loaded [ 0.998513] i2c-core: driver [adp5520] using legacy suspend method [ 0.998515] i2c-core: driver [adp5520] using legacy resume method [ 0.998899] Fixed MDIO Bus: probed [ 0.998934] PPP generic driver version 2.4.2 [ 0.998966] tun: Universal TUN/TAP device driver, 1.6 [ 0.998968] tun: (C) 1999-2004 Max Krasnyansky [ 0.999043] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.999096] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.999112] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 0.999142] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 0.999253] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.999281] ehci_hcd 0000:00:12.2: debug port 1 [ 0.999313] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf0409400 [ 1.008102] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.008268] hub 1-0:1.0: USB hub found [ 1.008272] hub 1-0:1.0: 6 ports detected [ 1.008431] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.008449] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.008486] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.008583] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.008610] ehci_hcd 0000:00:13.2: debug port 1 [ 1.008637] ehci_hcd 0000:00:13.2: irq 19, io mem 0xf0409800 [ 1.020108] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.020261] hub 2-0:1.0: USB hub found [ 1.020265] hub 2-0:1.0: 6 ports detected [ 1.020349] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.020401] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.020419] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.020455] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.020577] ohci_hcd 0000:00:12.0: irq 16, io mem 0xf0404000 [ 1.080246] hub 3-0:1.0: USB hub found [ 1.080287] hub 3-0:1.0: 3 ports detected [ 1.080362] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.080381] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 1.080424] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.080532] ohci_hcd 0000:00:12.1: irq 16, io mem 0xf0405000 [ 1.140241] hub 4-0:1.0: USB hub found [ 1.140282] hub 4-0:1.0: 3 ports detected [ 1.140365] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.140383] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.140419] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.140538] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0406000 [ 1.200238] hub 5-0:1.0: USB hub found [ 1.200279] hub 5-0:1.0: 3 ports detected [ 1.200352] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.200369] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.200406] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.200518] ohci_hcd 0000:00:13.1: irq 18, io mem 0xf0407000 [ 1.260230] hub 6-0:1.0: USB hub found [ 1.260271] hub 6-0:1.0: 3 ports detected [ 1.260346] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.260367] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 1.260405] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.260518] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf0408000 [ 1.320249] hub 7-0:1.0: USB hub found [ 1.320256] hub 7-0:1.0: 2 ports detected [ 1.320333] uhci_hcd: USB Universal Host Controller Interface driver [ 1.320413] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 1.323598] i8042: Detected active multiplexing controller, rev 1.1 [ 1.325319] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.325325] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.325353] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.325375] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.325398] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.325502] mousedev: PS/2 mouse device common for all mice [ 1.328204] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.328256] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs [ 1.328346] device-mapper: uevent: version 1.0.3 [ 1.328429] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 1.328591] device-mapper: multipath: version 1.2.0 loaded [ 1.328593] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.328669] EISA: Probing bus 0 at eisa.0 [ 1.328672] EISA: Cannot allocate resource for mainboard [ 1.328674] Cannot allocate resource for EISA slot 1 [ 1.328676] Cannot allocate resource for EISA slot 2 [ 1.328677] Cannot allocate resource for EISA slot 3 [ 1.328679] Cannot allocate resource for EISA slot 4 [ 1.328681] Cannot allocate resource for EISA slot 5 [ 1.328683] Cannot allocate resource for EISA slot 6 [ 1.328684] Cannot allocate resource for EISA slot 7 [ 1.328686] Cannot allocate resource for EISA slot 8 [ 1.328688] EISA: Detected 0 cards. [ 1.328825] cpuidle: using governor ladder [ 1.328827] cpuidle: using governor menu [ 1.329082] TCP cubic registered [ 1.329198] NET: Registered protocol family 10 [ 1.329710] NET: Registered protocol family 17 [ 1.329726] Registering the dns_resolver key type [ 1.329791] powernow-k8: Found 1 AMD Turion(tm) II Dual-Core Mobile M500 (2 cpu cores) (version 2.20.00) [ 1.329831] powernow-k8: 0 : pstate 0 (2200 MHz) [ 1.329832] powernow-k8: 1 : pstate 1 (2000 MHz) [ 1.329834] powernow-k8: 2 : pstate 2 (1500 MHz) [ 1.329836] powernow-k8: 3 : pstate 3 (1100 MHz) [ 1.329838] powernow-k8: 4 : pstate 4 (800 MHz) [ 1.329991] Using IPI No-Shortcut mode [ 1.330124] PM: Hibernation image not present or could not be loaded. [ 1.330134] registered taskstats version 1 [ 1.330442] Magic number: 7:760:897 [ 1.330577] rtc_cmos 00:04: setting system clock to 2011-04-07 18:52:51 UTC (1302202371) [ 1.330580] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.330582] EDD information not available. [ 1.330707] Freeing unused kernel memory: 700k freed [ 1.330950] Write protecting the kernel text: 5192k [ 1.330992] Write protecting the kernel read-only data: 2148k [ 1.332134] Refined TSC clocksource calibration: 2194.499 MHz. [ 1.332139] Switching to clocksource tsc [ 1.356369] <30>udev[65]: starting version 167 [ 1.358718] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.432065] usb 2-3: new high speed USB device using ehci_hcd and address 2 [ 1.441440] sky2: driver version 1.28 [ 1.441544] sky2 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.441593] sky2 0000:04:00.0: setting latency timer to 64 [ 1.441659] sky2 0000:04:00.0: Yukon-2 FE+ chip revision 0 [ 1.441793] sky2 0000:04:00.0: irq 44 for MSI/MSI-X [ 1.443611] sky2 0000:04:00.0: eth0: addr 00:24:54:78:bd:08 [ 1.456161] ahci 0000:00:11.0: version 3.0 [ 1.456183] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.456287] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0xb impl SATA mode [ 1.456291] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs [ 1.456914] scsi0 : ahci [ 1.457051] scsi1 : ahci [ 1.457129] scsi2 : ahci [ 1.457208] scsi3 : ahci [ 1.457338] ata1: SATA max UDMA/133 abar m1024@0xf0409000 port 0xf0409100 irq 22 [ 1.457341] ata2: SATA max UDMA/133 abar m1024@0xf0409000 port 0xf0409180 irq 22 [ 1.457343] ata3: DUMMY [ 1.457346] ata4: SATA max UDMA/133 abar m1024@0xf0409000 port 0xf0409280 irq 22 [ 1.776107] ata4: SATA link down (SStatus 0 SControl 300) [ 1.844099] usb 4-3: new full speed USB device using ohci_hcd and address 2 [ 1.948101] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.950599] ata2.00: ATAPI: SlimtypeDVD A DS8A4S, JS21, max UDMA/100 [ 1.951977] ata2.00: configured for UDMA/100 [ 1.952034] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.993789] ata1.00: ATA-8: WDC WD3200BEVT-22ZCT0, 11.01A11, max UDMA/133 [ 1.993794] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.996183] ata1.00: configured for UDMA/133 [ 1.996390] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 11.0 PQ: 0 ANSI: 5 [ 1.996591] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.996662] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.996705] sd 0:0:0:0: [sda] Write Protect is off [ 1.996708] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.996726] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.000653] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A4S JS21 PQ: 0 ANSI: 5 [ 2.006103] sr0: scsi3-mmc drive: 8x/8x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.006107] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.006268] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.006352] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.047932] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 2.048337] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.613469] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 5.396269] Adding 1955836k swap on /dev/sda5. Priority:-1 extents:1 across:1955836k [ 7.882263] <30>udev[396]: starting version 167 [ 10.179516] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 10.181289] acpi device:03: registered as cooling_device2 [ 10.181456] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5 [ 10.181573] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 10.214311] ACPI: resource piix4_smbus [io 0x8040-0x8047] conflicts with ACPI region SMB0 [io 0x8040-0x804f] [ 10.214314] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.338161] Linux video capture interface: v2.00 [ 10.407385] Bluetooth: Core ver 2.15 [ 10.407439] NET: Registered protocol family 31 [ 10.407441] Bluetooth: HCI device and connection manager initialized [ 10.407445] Bluetooth: HCI socket layer initialized [ 10.491117] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 10.491740] usbcore: registered new interface driver btusb [ 10.582104] cfg80211: Calling CRDA to update world regulatory domain [ 10.679343] uvcvideo: Found UVC 1.00 device WebCam SCB-0340N (0ac8:c33f) [ 10.681287] input: WebCam SCB-0340N as /devices/pci0000:00/0000:00:13.2/usb2/2-3/2-3:1.0/input/input6 [ 10.681446] usbcore: registered new interface driver uvcvideo [ 10.681449] USB Video Class driver (v1.0.0) [ 10.709445] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 [ 10.709637] SP5100 TCO timer: Watchdog reboot not detected. [ 10.710391] SP5100 TCO timer: initialized (0xf80020f0). heartbeat=60 sec (nowayout=0) [ 10.879486] lp: driver loaded but no devices found [ 11.162717] type=1400 audit(1302187981.328:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=547 comm="apparmor_parser" [ 11.162757] type=1400 audit(1302187981.328:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=588 comm="apparmor_parser" [ 11.163075] type=1400 audit(1302187981.328:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=547 comm="apparmor_parser" [ 11.163120] type=1400 audit(1302187981.328:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=588 comm="apparmor_parser" [ 11.163304] type=1400 audit(1302187981.328:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=547 comm="apparmor_parser" [ 11.163356] type=1400 audit(1302187981.328:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=588 comm="apparmor_parser" [ 11.501391] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 11.501396] Disabling lock debugging due to kernel taint [ 11.565059] [fglrx] Maximum main memory to use for locked dma buffers: 2875 MBytes. [ 11.565372] [fglrx] vendor: 1002 device: 9553 count: 1 [ 11.565856] [fglrx] ioport: bar 1, base 0x9000, size: 0x100 [ 11.565871] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 11.565877] pci 0000:01:00.0: setting latency timer to 64 [ 11.566083] [fglrx] Kernel PAT support is enabled [ 11.566105] [fglrx] module loaded - fglrx 8.84.60 [Mar 24 2011] with 1 minors [ 11.598758] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 11.598768] ath9k 0000:02:00.0: setting latency timer to 64 [ 11.649493] ath: EEPROM regdomain: 0x65 [ 11.649495] ath: EEPROM indicates we should expect a direct regpair map [ 11.649499] ath: Country alpha2 being used: 00 [ 11.649500] ath: Regpair used: 0x65 [ 11.649503] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 11.649506] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 11.649508] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 11.649511] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 11.649513] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 11.649516] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 11.649518] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 11.649520] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 11.649523] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 11.649525] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 11.649527] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 11.649530] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 11.649532] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 11.649535] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 11.649537] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 11.649539] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 11.649541] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 11.649544] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 11.649546] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 11.649549] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 11.649551] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 11.649553] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 11.649556] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 11.649558] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 11.649560] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 11.649563] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 11.649565] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 11.651006] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 11.670098] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000 [ 11.712170] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 [ 12.023564] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 12.023572] cfg80211: World regulatory domain updated: [ 12.023574] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 12.023577] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.023581] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 12.023583] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 12.023586] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.023588] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.163144] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control' [ 12.163777] Registered led device: ath9k-phy0::radio [ 12.163798] Registered led device: ath9k-phy0::assoc [ 12.163817] Registered led device: ath9k-phy0::tx [ 12.163836] Registered led device: ath9k-phy0::rx [ 12.163844] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8120000, irq=16 [ 12.612413] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 12.748143] hda_codec: ALC269: BIOS auto-probing. [ 12.753614] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 12.753723] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 12.753890] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 12.753947] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 12.753971] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 19.893041] EXT4-fs (sda6): warning: maximal mount count reached, running e2fsck is recommended [ 19.893417] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [ 21.764703] type=1400 audit(1302187991.932:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=892 comm="apparmor_parser" [ 21.765078] type=1400 audit(1302187991.932:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=892 comm="apparmor_parser" [ 21.765312] type=1400 audit(1302187991.932:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=892 comm="apparmor_parser" [ 21.827796] type=1400 audit(1302187991.992:11): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=891 comm="apparmor_parser" [ 21.973660] type=1400 audit(1302187992.140:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=893 comm="apparmor_parser" [ 21.978452] type=1400 audit(1302187992.144:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=893 comm="apparmor_parser" [ 21.981341] type=1400 audit(1302187992.148:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=893 comm="apparmor_parser" [ 22.043298] type=1400 audit(1302187992.208:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=896 comm="apparmor_parser" [ 22.043735] type=1400 audit(1302187992.208:16): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=896 comm="apparmor_parser" [ 22.084556] type=1400 audit(1302187992.252:17): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=897 comm="apparmor_parser" [ 22.508459] ppdev: user-space parallel port driver [ 25.475103] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 25.489210] sky2 0000:04:00.0: eth0: enabling interface [ 25.489553] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 28.594729] vboxdrv: Found 2 processor cores. [ 28.595487] vboxdrv: fAsync=0 offMin=0x334 offMax=0x793 [ 28.595546] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 28.595548] vboxdrv: Successfully loaded version 4.0.4 (interface 0x00160000). [ 30.417308] [fglrx] ATIF platform detected with notification ID: 0x81 [ 31.090407] Bluetooth: L2CAP ver 2.15 [ 31.090410] Bluetooth: L2CAP socket layer initialized [ 31.260623] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 31.260627] Bluetooth: BNEP filters: protocol multicast [ 31.305698] Bluetooth: SCO (Voice Link) ver 0.6 [ 31.305701] Bluetooth: SCO socket layer initialized [ 31.477282] fglrx_pci 0000:01:00.0: irq 46 for MSI/MSI-X [ 31.477848] [fglrx] Firegl kernel thread PID: 1235 [ 31.477902] [fglrx] Firegl kernel thread PID: 1236 [ 31.477994] [fglrx] Firegl kernel thread PID: 1237 [ 31.478217] [fglrx] IRQ 46 Enabled [ 31.614876] Bluetooth: RFCOMM TTY layer initialized [ 31.614882] Bluetooth: RFCOMM socket layer initialized [ 31.614884] Bluetooth: RFCOMM ver 1.11 [ 34.209449] [fglrx] Gart USWC size:944 M. [ 34.209453] [fglrx] Gart cacheable size:373 M. [ 34.209459] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 34.209462] [fglrx] Reserved FB block: Unshared offset:fd0b000, size:2f5000 [ 34.209464] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 [ 34.936059] usb 3-2: new low speed USB device using ohci_hcd and address 2 [ 35.195015] usbcore: registered new interface driver usbhid [ 35.195018] usbhid: USB HID core driver [ 35.319333] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input10 [ 35.319477] a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:12.0-2/input0 [ 39.733151] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0 [ 50.184992] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 70.749034] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0 [ 85.250577] sky2 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both [ 85.250835] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 87.743341] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 94.820054] wlan0: Creating new IBSS network, BSSID e2:9a:c4:17:30:e4 [ 95.560028] eth0: no IPv6 routers present [ 98.408034] wlan0: no IPv6 routers present [ 614.198807] <30>udev[3659]: starting version 167