[30640.545829] cfg80211: World regulatory domain updated:
[30640.545832] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[30640.545834] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[30640.545836] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[30640.545838] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[30640.545840] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[30640.545842] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[30644.518371] PM: Syncing filesystems ... done.
[30644.715164] PM: Preparing system for mem sleep
[30644.715545] Freezing user space processes ... (elapsed 0.001 seconds) done.
[30644.717386] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[30644.718748] PM: Entering mem sleep
[30644.718760] Suspending console(s) (use no_console_suspend to debug)
[30644.719074] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[30644.763776] sd 0:0:0:0: [sda] Stopping disk
[30645.776281] PM: suspend of devices complete after 1057.298 msecs
[30645.776568] PM: late suspend of devices complete after 0.283 msecs
[30645.796861] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[30645.816649] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[30645.821239] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[30645.825838] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[30645.830611] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[30645.848663] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
[30645.853263] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
[30645.859406] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[30645.859447]  pci0000:00: System wakeup enabled by ACPI
[30645.872068] PM: noirq suspend of devices complete after 95.496 msecs
[30645.872709] ACPI: Preparing to enter system sleep state S3
[30645.884125] PM: Saving platform NVS memory
[30645.884127] Disabling non-boot CPUs ...
[30645.988020] smpboot: CPU 1 is now offline
[30645.988223] ACPI: Low-level resume complete
[30645.988223] PM: Restoring platform NVS memory
[30645.988223] Enabling non-boot CPUs ...
[30645.988223] smpboot: Booting Node 0 Processor 1 APIC 0x1
[30645.885442] Initializing CPU#1
[30646.000386] CPU1 is up
[30646.003278] ACPI: Waking up from system sleep state S3
[30646.052570] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[30646.057052] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
[30646.061608] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
[30646.080446] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[30646.100756] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[30646.105198] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[30646.109562] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[30646.128941] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[30646.160299] PM: noirq resume of devices complete after 125.707 msecs
[30646.160436] PM: early resume of devices complete after 0.109 msecs
[30646.160464]  pci0000:00: System wakeup disabled by ACPI
[30646.160473] e1000e 0000:00:19.0: setting latency timer to 64
[30646.160499] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[30646.162763] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[30646.162788] usb usb3: root hub lost power or was reset
[30646.162866] pci 0000:00:1e.0: setting latency timer to 64
[30646.162878] ahci 0000:00:1f.2: setting latency timer to 64
[30646.162956] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[30646.162987] usb usb4: root hub lost power or was reset
[30646.163515] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[30646.163558] usb usb5: root hub lost power or was reset
[30646.163796] ehci-pci 0000:00:1a.7: setting latency timer to 64
[30646.164172] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[30646.165271] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[30646.165340] usb usb6: root hub lost power or was reset
[30646.165797] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[30646.165857] usb usb7: root hub lost power or was reset
[30646.166098] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[30646.166163] usb usb8: root hub lost power or was reset
[30646.166385] ehci-pci 0000:00:1d.7: setting latency timer to 64
[30646.484138] ata5: SATA link down (SStatus 0 SControl 300)
[30646.492088] ata6: SATA link down (SStatus 0 SControl 300)
[30646.656091] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[30646.724753] ata2.00: configured for UDMA/100
[30646.998518] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input25
[30649.364021] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[30649.544444] ata1.00: configured for UDMA/133
[30649.568278] sd 0:0:0:0: [sda] Starting disk
[30649.758951] PM: resume of devices complete after 3598.511 msecs
[30649.759179] PM: Finishing wakeup.
[30649.759180] Restarting tasks ... done.
[30649.802902] video LNXVIDEO:00: Restoring backlight state
[30650.144072] usb 5-1: USB disconnect, device number 18
[30650.353312] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[30650.384046] usb 5-1: new full-speed USB device number 19 using uhci_hcd
[30650.456090] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[30650.456289] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[30650.459688] iwlwifi 0000:0c:00.0: L1 Enabled; Disabling L0S
[30650.462938] iwlwifi 0000:0c:00.0: Radio type=0x1-0x2-0x0
[30650.492573] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[30650.566078] usb 5-1: New USB device found, idVendor=0a5c, idProduct=5800
[30650.566082] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[30650.566085] usb 5-1: Product: 5880
[30650.566087] usb 5-1: Manufacturer: Broadcom Corp
[30650.566089] usb 5-1: SerialNumber: 0123456789ABCD
[30650.566186] usb 5-1: config 0 descriptor??
[30680.335766] wlan0: authenticate with 00:23:97:ea:81:70
[30680.339458] wlan0: send auth to 00:23:97:ea:81:70 (try 1/3)
[30680.345451] wlan0: authenticated
[30680.345603] iwlwifi 0000:0c:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[30680.345608] iwlwifi 0000:0c:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[30680.345611] iwlwifi 0000:0c:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[30680.348073] wlan0: associate with 00:23:97:ea:81:70 (try 1/3)
[30680.354618] wlan0: RX AssocResp from 00:23:97:ea:81:70 (capab=0x411 status=0 aid=3)
[30680.357471] wlan0: associated
[30680.357493] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[31622.712178] wlan0: deauthenticating from 00:23:97:ea:81:70 by local choice (reason=3)
[31622.721683] cfg80211: Calling CRDA to update world regulatory domain
[31622.730398] cfg80211: World regulatory domain updated:
[31622.730402] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[31622.730404] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[31622.730406] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[31622.730408] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[31622.730410] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[31622.730412] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[31626.792613] PM: Syncing filesystems ... done.
[31627.031031] PM: Preparing system for mem sleep
[31627.031414] Freezing user space processes ... (elapsed 0.001 seconds) done.
[31627.033216] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[31627.034413] PM: Entering mem sleep
[31627.034426] Suspending console(s) (use no_console_suspend to debug)
[31627.034753] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[31627.051840] sd 0:0:0:0: [sda] Stopping disk
[31628.064300] PM: suspend of devices complete after 1029.648 msecs
[31628.064574] PM: late suspend of devices complete after 0.271 msecs
[31628.084917] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[31628.104626] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[31628.109212] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[31628.115156] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[31628.119934] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[31628.136625] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
[31628.141218] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
[31628.145821] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[31628.145862]  pci0000:00: System wakeup enabled by ACPI
[31628.160066] PM: noirq suspend of devices complete after 95.489 msecs
[31628.160709] ACPI: Preparing to enter system sleep state S3
[31628.172047] PM: Saving platform NVS memory
[31628.172049] Disabling non-boot CPUs ...
[31628.276018] smpboot: CPU 1 is now offline
[31628.276192] ACPI: Low-level resume complete
[31628.276192] PM: Restoring platform NVS memory
[31628.276192] Enabling non-boot CPUs ...
[31628.276192] smpboot: Booting Node 0 Processor 1 APIC 0x1
[31628.173370] Initializing CPU#1
[31628.288350] CPU1 is up
[31628.291241] ACPI: Waking up from system sleep state S3
[31628.340642] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[31628.345194] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
[31628.349753] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
[31628.368380] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[31628.388727] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[31628.393182] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[31628.397596] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[31628.417007] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[31628.448299] PM: noirq resume of devices complete after 126.508 msecs
[31628.448436] PM: early resume of devices complete after 0.109 msecs
[31628.448465]  pci0000:00: System wakeup disabled by ACPI
[31628.448474] e1000e 0000:00:19.0: setting latency timer to 64
[31628.448500] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[31628.450611] pci 0000:00:1e.0: setting latency timer to 64
[31628.450624] ahci 0000:00:1f.2: setting latency timer to 64
[31628.450729] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[31628.450763] usb usb3: root hub lost power or was reset
[31628.451052] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[31628.451100] usb usb4: root hub lost power or was reset
[31628.452284] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[31628.452333] usb usb5: root hub lost power or was reset
[31628.452615] ehci-pci 0000:00:1a.7: setting latency timer to 64
[31628.453045] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[31628.454678] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[31628.454729] usb usb6: root hub lost power or was reset
[31628.454959] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[31628.455007] usb usb7: root hub lost power or was reset
[31628.455241] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[31628.455289] usb usb8: root hub lost power or was reset
[31628.455530] ehci-pci 0000:00:1d.7: setting latency timer to 64
[31628.780094] ata6: SATA link down (SStatus 0 SControl 300)
[31628.788093] ata5: SATA link down (SStatus 0 SControl 300)
[31628.968083] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[31629.081008] ata2.00: configured for UDMA/100
[31629.298398] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input26
[31631.744253] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[31631.928740] ata1.00: configured for UDMA/133
[31631.956258] sd 0:0:0:0: [sda] Starting disk
[31632.159939] PM: resume of devices complete after 3711.498 msecs
[31632.160212] PM: Finishing wakeup.
[31632.160213] Restarting tasks ... done.
[31632.209235] video LNXVIDEO:00: Restoring backlight state
[31632.552088] usb 5-1: USB disconnect, device number 19
[31632.724250] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[31632.792054] usb 5-1: new full-speed USB device number 20 using uhci_hcd
[31632.828091] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[31632.828288] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[31632.831085] iwlwifi 0000:0c:00.0: L1 Enabled; Disabling L0S
[31632.834554] iwlwifi 0000:0c:00.0: Radio type=0x1-0x2-0x0
[31632.860688] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[31638.924730] wlan0: authenticate with 00:23:97:ea:81:70
[31638.926496] wlan0: send auth to 00:23:97:ea:81:70 (try 1/3)
[31638.929569] wlan0: authenticated
[31638.932833] iwlwifi 0000:0c:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[31638.932836] iwlwifi 0000:0c:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[31638.932838] iwlwifi 0000:0c:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[31638.936298] wlan0: associate with 00:23:97:ea:81:70 (try 1/3)
[31638.939030] wlan0: RX AssocResp from 00:23:97:ea:81:70 (capab=0x411 status=0 aid=3)
[31638.941931] wlan0: associated
[31638.941954] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[31647.916318] usb 5-1: device descriptor read/64, error -110
[31663.144314] usb 5-1: device descriptor read/64, error -110
[31663.360314] usb 5-1: new full-speed USB device number 21 using uhci_hcd
[31663.540574] usb 5-1: New USB device found, idVendor=0a5c, idProduct=5800
[31663.540586] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[31663.540593] usb 5-1: Product: 5880
[31663.540600] usb 5-1: Manufacturer: Broadcom Corp
[31663.540607] usb 5-1: SerialNumber: 0123456789ABCD
[31663.540903] usb 5-1: config 0 descriptor??
[33430.604271] wlan0: deauthenticating from 00:23:97:ea:81:70 by local choice (reason=3)
[33430.617084] cfg80211: Calling CRDA to update world regulatory domain
[33430.620200] cfg80211: World regulatory domain updated:
[33430.620204] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[33430.620206] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33430.620208] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33430.620209] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[33430.620211] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33430.620213] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[33434.135785] PM: Syncing filesystems ... done.
[33434.396778] PM: Preparing system for mem sleep
[33434.397152] Freezing user space processes ... (elapsed 0.001 seconds) done.
[33434.398989] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[33434.400294] PM: Entering mem sleep
[33434.400307] Suspending console(s) (use no_console_suspend to debug)
[33434.400627] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[33434.427223] sd 0:0:0:0: [sda] Stopping disk
[33435.440284] PM: suspend of devices complete after 1039.760 msecs
[33435.440564] PM: late suspend of devices complete after 0.277 msecs
[33435.460938] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[33435.480624] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[33435.485227] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[33435.489819] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[33435.494577] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[33435.512639] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
[33435.517240] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
[33435.521846] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[33435.521888]  pci0000:00: System wakeup enabled by ACPI
[33435.536069] PM: noirq suspend of devices complete after 95.502 msecs
[33435.536711] ACPI: Preparing to enter system sleep state S3
[33435.550492] PM: Saving platform NVS memory
[33435.550494] Disabling non-boot CPUs ...
[33435.652019] smpboot: CPU 1 is now offline
[33435.652223] ACPI: Low-level resume complete
[33435.652223] PM: Restoring platform NVS memory
[33435.652223] Enabling non-boot CPUs ...
[33435.652223] smpboot: Booting Node 0 Processor 1 APIC 0x1
[33435.551816] Initializing CPU#1
[33435.664382] CPU1 is up
[33435.667274] ACPI: Waking up from system sleep state S3
[33435.717064] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[33435.721670] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
[33435.726211] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
[33435.744646] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[33435.764742] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[33435.769013] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[33435.773592] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[33435.793463] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[33435.824298] PM: noirq resume of devices complete after 125.896 msecs
[33435.824435] PM: early resume of devices complete after 0.109 msecs
[33435.824464]  pci0000:00: System wakeup disabled by ACPI
[33435.824472] e1000e 0000:00:19.0: setting latency timer to 64
[33435.824498] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[33435.824716] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[33435.824740] usb usb3: root hub lost power or was reset
[33435.824945] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[33435.824972] usb usb4: root hub lost power or was reset
[33435.825173] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[33435.825197] usb usb5: root hub lost power or was reset
[33435.825401] ehci-pci 0000:00:1a.7: setting latency timer to 64
[33435.825636] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[33435.825883] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[33435.825908] usb usb6: root hub lost power or was reset
[33435.826114] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[33435.826137] usb usb7: root hub lost power or was reset
[33435.826340] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[33435.826362] usb usb8: root hub lost power or was reset
[33435.826483] pci 0000:00:1e.0: setting latency timer to 64
[33435.826496] ahci 0000:00:1f.2: setting latency timer to 64
[33435.826572] ehci-pci 0000:00:1d.7: setting latency timer to 64
[33436.160093] ata5: SATA link down (SStatus 0 SControl 300)
[33436.168096] ata6: SATA link down (SStatus 0 SControl 300)
[33436.324093] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[33436.396036] ata2.00: configured for UDMA/100
[33436.706400] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input27
[33439.060219] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[33439.237361] ata1.00: configured for UDMA/133
[33439.264063] sd 0:0:0:0: [sda] Starting disk
[33439.453036] PM: resume of devices complete after 3628.595 msecs
[33439.453281] PM: Finishing wakeup.
[33439.453282] Restarting tasks ... done.
[33439.511588] video LNXVIDEO:00: Restoring backlight state
[33439.840061] usb 5-1: USB disconnect, device number 21
[33439.952237] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[33440.056089] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[33440.056285] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[33440.057722] iwlwifi 0000:0c:00.0: L1 Enabled; Disabling L0S
[33440.062844] iwlwifi 0000:0c:00.0: Radio type=0x1-0x2-0x0
[33440.084046] usb 5-1: new full-speed USB device number 22 using uhci_hcd
[33440.092743] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[33440.266996] usb 5-1: New USB device found, idVendor=0a5c, idProduct=5800
[33440.267000] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[33440.267002] usb 5-1: Product: 5880
[33440.267004] usb 5-1: Manufacturer: Broadcom Corp
[33440.267006] usb 5-1: SerialNumber: 0123456789ABCD
[33440.267108] usb 5-1: config 0 descriptor??
[33446.309692] wlan0: authenticate with 00:23:97:ea:81:70
[33446.310708] wlan0: send auth to 00:23:97:ea:81:70 (try 1/3)
[33446.313517] wlan0: authenticated
[33446.313630] iwlwifi 0000:0c:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[33446.313633] iwlwifi 0000:0c:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[33446.313636] iwlwifi 0000:0c:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[33446.316022] wlan0: associate with 00:23:97:ea:81:70 (try 1/3)
[33446.318294] wlan0: RX AssocResp from 00:23:97:ea:81:70 (capab=0x411 status=0 aid=2)
[33446.321117] wlan0: associated
[33446.321142] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[39875.785393] wlan0: deauthenticating from 00:23:97:ea:81:70 by local choice (reason=3)
[39875.796138] cfg80211: Calling CRDA to update world regulatory domain
[39875.798939] cfg80211: World regulatory domain updated:
[39875.798942] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[39875.798945] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[39875.798947] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[39875.798949] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[39875.798950] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[39875.798952] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[39879.296488] PM: Syncing filesystems ... done.
[39879.646568] PM: Preparing system for mem sleep
[39879.646990] Freezing user space processes ... (elapsed 0.001 seconds) done.
[39879.648813] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[39879.650000] PM: Entering mem sleep
[39879.650014] Suspending console(s) (use no_console_suspend to debug)
[39879.650342] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[39879.670978] sd 0:0:0:0: [sda] Stopping disk
[39880.684276] PM: suspend of devices complete after 1034.029 msecs
[39880.684563] PM: late suspend of devices complete after 0.283 msecs
[39880.704895] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[39880.724650] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[39880.729346] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[39880.733978] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[39880.738780] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[39880.756651] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
[39880.761337] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
[39880.765956] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[39880.765997]  pci0000:00: System wakeup enabled by ACPI
[39880.780066] PM: noirq suspend of devices complete after 95.500 msecs
[39880.780709] ACPI: Preparing to enter system sleep state S3
[39880.792013] PM: Saving platform NVS memory
[39880.792015] Disabling non-boot CPUs ...
[39880.896017] smpboot: CPU 1 is now offline
[39880.896197] ACPI: Low-level resume complete
[39880.896197] PM: Restoring platform NVS memory
[39880.896197] Enabling non-boot CPUs ...
[39880.896197] smpboot: Booting Node 0 Processor 1 APIC 0x1
[39880.793331] Initializing CPU#1
[39880.908351] CPU1 is up
[39880.911243] ACPI: Waking up from system sleep state S3
[39880.960775] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[39880.965294] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
[39880.969794] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
[39880.988532] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[39881.009051] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[39881.013522] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[39881.018048] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[39881.036926] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[39881.068298] PM: noirq resume of devices complete after 126.373 msecs
[39881.068436] PM: early resume of devices complete after 0.109 msecs
[39881.068465]  pci0000:00: System wakeup disabled by ACPI
[39881.068474] e1000e 0000:00:19.0: setting latency timer to 64
[39881.068499] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[39881.070760] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[39881.070784] usb usb3: root hub lost power or was reset
[39881.070877] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[39881.070900] usb usb4: root hub lost power or was reset
[39881.070925] pci 0000:00:1e.0: setting latency timer to 64
[39881.070938] ahci 0000:00:1f.2: setting latency timer to 64
[39881.071044] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[39881.071083] usb usb5: root hub lost power or was reset
[39881.071337] ehci-pci 0000:00:1a.7: setting latency timer to 64
[39881.071586] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[39881.071861] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[39881.071914] usb usb6: root hub lost power or was reset
[39881.072141] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[39881.072187] usb usb7: root hub lost power or was reset
[39881.072405] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[39881.072453] usb usb8: root hub lost power or was reset
[39881.072769] ehci-pci 0000:00:1d.7: setting latency timer to 64
[39881.408095] ata6: SATA link down (SStatus 0 SControl 300)
[39881.416100] ata5: SATA link down (SStatus 0 SControl 300)
[39881.572085] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[39881.641453] ata2.00: configured for UDMA/100
[39881.987952] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input28
[39884.308225] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[39884.487071] ata1.00: configured for UDMA/133
[39884.512250] sd 0:0:0:0: [sda] Starting disk
[39884.701616] PM: resume of devices complete after 3633.174 msecs
[39884.701864] PM: Finishing wakeup.
[39884.701865] Restarting tasks ... done.
[39884.749316] video LNXVIDEO:00: Restoring backlight state
[39885.088073] usb 5-1: USB disconnect, device number 22
[39885.284249] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[39885.328049] usb 5-1: new full-speed USB device number 23 using uhci_hcd
[39885.388115] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[39885.388250] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[39885.389121] iwlwifi 0000:0c:00.0: L1 Enabled; Disabling L0S
[39885.394997] iwlwifi 0000:0c:00.0: Radio type=0x1-0x2-0x0
[39885.426137] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[39885.511047] usb 5-1: New USB device found, idVendor=0a5c, idProduct=5800
[39885.511052] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[39885.511054] usb 5-1: Product: 5880
[39885.511056] usb 5-1: Manufacturer: Broadcom Corp
[39885.511058] usb 5-1: SerialNumber: 0123456789ABCD
[39885.511156] usb 5-1: config 0 descriptor??
[39891.945460] wlan0: authenticate with 00:23:97:ea:81:70
[39891.966465] wlan0: send auth to 00:23:97:ea:81:70 (try 1/3)
[39891.968748] wlan0: authenticated
[39891.968848] iwlwifi 0000:0c:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[39891.968852] iwlwifi 0000:0c:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[39891.968854] iwlwifi 0000:0c:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[39891.972028] wlan0: associate with 00:23:97:ea:81:70 (try 1/3)
[39891.974356] wlan0: RX AssocResp from 00:23:97:ea:81:70 (capab=0x411 status=0 aid=2)
[39891.977183] wlan0: associated
[39891.977683] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[42300.136065] wlan0: deauthenticating from 00:23:97:ea:81:70 by local choice (reason=3)
[42300.184254] cfg80211: Calling CRDA to update world regulatory domain
[42300.230052] cfg80211: World regulatory domain updated:
[42300.230056] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[42300.230059] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[42300.230061] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[42300.230063] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[42300.230064] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[42300.230066] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[42303.673408] PM: Syncing filesystems ... done.
[42303.908645] PM: Preparing system for mem sleep
[42303.909035] Freezing user space processes ... (elapsed 0.001 seconds) done.
[42303.910899] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[42303.912274] PM: Entering mem sleep
[42303.912287] Suspending console(s) (use no_console_suspend to debug)
[42303.912608] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[42303.960036] sd 0:0:0:0: [sda] Stopping disk
[42304.972278] PM: suspend of devices complete after 1059.774 msecs
[42304.972561] PM: late suspend of devices complete after 0.279 msecs
[42304.992836] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[42305.012924] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[42305.017798] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[42305.022685] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[42305.027752] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[42305.046181] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
[42305.051129] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
[42305.056222] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[42305.056263]  pci0000:00: System wakeup enabled by ACPI
[42305.072066] PM: noirq suspend of devices complete after 99.502 msecs
[42305.072707] ACPI: Preparing to enter system sleep state S3
[42305.084188] PM: Saving platform NVS memory
[42305.084189] Disabling non-boot CPUs ...
[42305.188018] smpboot: CPU 1 is now offline
[42305.188188] ACPI: Low-level resume complete
[42305.188188] PM: Restoring platform NVS memory
[42305.188188] Enabling non-boot CPUs ...
[42305.188188] smpboot: Booting Node 0 Processor 1 APIC 0x1
[42305.085510] Initializing CPU#1
[42305.200349] CPU1 is up
[42305.203240] ACPI: Waking up from system sleep state S3
[42305.252829] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[42305.257360] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
[42305.261862] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
[42305.280582] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[42305.300777] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[42305.305113] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[42305.309799] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[42305.329907] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[42305.360297] PM: noirq resume of devices complete after 126.029 msecs
[42305.360434] PM: early resume of devices complete after 0.109 msecs
[42305.360463]  pci0000:00: System wakeup disabled by ACPI
[42305.360471] e1000e 0000:00:19.0: setting latency timer to 64
[42305.360497] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[42305.362647] pci 0000:00:1e.0: setting latency timer to 64
[42305.362659] ahci 0000:00:1f.2: setting latency timer to 64
[42305.362810] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[42305.362844] usb usb3: root hub lost power or was reset
[42305.363298] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[42305.363342] usb usb4: root hub lost power or was reset
[42305.363605] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[42305.363656] usb usb5: root hub lost power or was reset
[42305.363950] ehci-pci 0000:00:1a.7: setting latency timer to 64
[42305.365446] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[42305.365769] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[42305.365838] usb usb6: root hub lost power or was reset
[42305.366068] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[42305.366102] usb usb7: root hub lost power or was reset
[42305.366326] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[42305.366374] usb usb8: root hub lost power or was reset
[42305.366612] ehci-pci 0000:00:1d.7: setting latency timer to 64
[42305.692095] ata6: SATA link down (SStatus 0 SControl 300)
[42305.700093] ata5: SATA link down (SStatus 0 SControl 300)
[42305.880084] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[42305.990165] ata2.00: configured for UDMA/100
[42306.238398] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input29
[42308.600220] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[42308.782970] ata1.00: configured for UDMA/133
[42308.808257] sd 0:0:0:0: [sda] Starting disk
[42308.997486] PM: resume of devices complete after 3637.047 msecs
[42308.997738] PM: Finishing wakeup.
[42308.997740] Restarting tasks ... done.
[42309.085558] video LNXVIDEO:00: Restoring backlight state
[42309.384492] usb 5-1: USB disconnect, device number 23
[42309.624048] usb 5-1: new full-speed USB device number 24 using uhci_hcd
[42309.672661] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[42309.776090] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[42309.776279] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[42309.779039] iwlwifi 0000:0c:00.0: L1 Enabled; Disabling L0S
[42309.782424] iwlwifi 0000:0c:00.0: Radio type=0x1-0x2-0x0
[42309.808753] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[42309.816091] usb 5-1: New USB device found, idVendor=0a5c, idProduct=5800
[42309.816094] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[42309.816097] usb 5-1: Product: 5880
[42309.816099] usb 5-1: Manufacturer: Broadcom Corp
[42309.816101] usb 5-1: SerialNumber: 0123456789ABCD
[42309.816188] usb 5-1: config 0 descriptor??
[42339.287956] wlan0: authenticate with 00:23:97:ea:81:70
[42339.293016] wlan0: send auth to 00:23:97:ea:81:70 (try 1/3)
[42339.295791] wlan0: authenticated
[42339.296098] iwlwifi 0000:0c:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[42339.296108] iwlwifi 0000:0c:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[42339.296116] iwlwifi 0000:0c:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[42339.296123] wlan0: waiting for beacon from 00:23:97:ea:81:70
[42339.396042] wlan0: associate with 00:23:97:ea:81:70 (try 1/3)
[42339.399484] wlan0: RX AssocResp from 00:23:97:ea:81:70 (capab=0x411 status=0 aid=2)
[42339.405395] wlan0: associated
[42339.405455] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[49155.991574] wlan0: deauthenticating from 00:23:97:ea:81:70 by local choice (reason=3)
[49155.998426] cfg80211: Calling CRDA to update world regulatory domain
[49156.001669] cfg80211: World regulatory domain updated:
[49156.001673] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[49156.001675] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[49156.001677] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[49156.001679] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[49156.001681] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[49156.001682] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[49159.519576] PM: Syncing filesystems ... done.
[49159.706914] PM: Preparing system for mem sleep
[49159.707308] Freezing user space processes ... (elapsed 0.001 seconds) done.
[49159.709096] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[49159.710460] PM: Entering mem sleep
[49159.710472] Suspending console(s) (use no_console_suspend to debug)
[49159.710801] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[49159.784790] sd 0:0:0:0: [sda] Stopping disk
[49160.800276] PM: suspend of devices complete after 1089.581 msecs
[49160.800569] PM: late suspend of devices complete after 0.289 msecs
[49160.820874] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[49160.840639] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[49160.845341] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[49160.849952] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[49160.854749] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[49160.872640] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
[49160.877686] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
[49160.882364] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[49160.882405]  pci0000:00: System wakeup enabled by ACPI
[49160.896066] PM: noirq suspend of devices complete after 95.494 msecs
[49160.896707] ACPI: Preparing to enter system sleep state S3
[49160.908125] PM: Saving platform NVS memory
[49160.908126] Disabling non-boot CPUs ...
[49161.012018] smpboot: CPU 1 is now offline
[49161.012228] ACPI: Low-level resume complete
[49161.012228] PM: Restoring platform NVS memory
[49161.012228] Enabling non-boot CPUs ...
[49161.012228] smpboot: Booting Node 0 Processor 1 APIC 0x1
[49160.909445] Initializing CPU#1
[49161.024391] CPU1 is up
[49161.027282] ACPI: Waking up from system sleep state S3
[49161.076465] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[49161.081056] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
[49161.085462] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
[49161.104537] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[49161.124729] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[49161.129134] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[49161.133555] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[49161.153890] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[49161.184299] PM: noirq resume of devices complete after 126.120 msecs
[49161.184437] PM: early resume of devices complete after 0.109 msecs
[49161.184465]  pci0000:00: System wakeup disabled by ACPI
[49161.184474] e1000e 0000:00:19.0: setting latency timer to 64
[49161.184500] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[49161.186780] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[49161.186805] usb usb3: root hub lost power or was reset
[49161.186883] pci 0000:00:1e.0: setting latency timer to 64
[49161.186896] ahci 0000:00:1f.2: setting latency timer to 64
[49161.186972] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[49161.186999] usb usb4: root hub lost power or was reset
[49161.187519] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[49161.187569] usb usb5: root hub lost power or was reset
[49161.187809] ehci-pci 0000:00:1a.7: setting latency timer to 64
[49161.188167] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[49161.188480] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[49161.188530] usb usb6: root hub lost power or was reset
[49161.188781] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[49161.188829] usb usb7: root hub lost power or was reset
[49161.189078] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[49161.189144] usb usb8: root hub lost power or was reset
[49161.190589] ehci-pci 0000:00:1d.7: setting latency timer to 64
[49161.516092] ata6: SATA link down (SStatus 0 SControl 300)
[49161.524090] ata5: SATA link down (SStatus 0 SControl 300)
[49161.704081] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[49161.773196] ata2.00: configured for UDMA/100
[49162.058541] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input30
[49164.424234] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[49164.599122] ata1.00: configured for UDMA/133
[49164.624063] sd 0:0:0:0: [sda] Starting disk
[49164.815131] PM: resume of devices complete after 3630.690 msecs
[49164.815360] PM: Finishing wakeup.
[49164.815361] Restarting tasks ... done.
[49164.859084] video LNXVIDEO:00: Restoring backlight state
[49165.204085] usb 5-1: USB disconnect, device number 24
[49165.290482] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[49165.392094] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[49165.392300] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[49165.395786] iwlwifi 0000:0c:00.0: L1 Enabled; Disabling L0S
[49165.399197] iwlwifi 0000:0c:00.0: Radio type=0x1-0x2-0x0
[49165.428625] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[49165.444032] usb 5-1: new full-speed USB device number 25 using uhci_hcd
[49165.627069] usb 5-1: New USB device found, idVendor=0a5c, idProduct=5800
[49165.627073] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[49165.627075] usb 5-1: Product: 5880
[49165.627078] usb 5-1: Manufacturer: Broadcom Corp
[49165.627080] usb 5-1: SerialNumber: 0123456789ABCD
[49165.627175] usb 5-1: config 0 descriptor??
[49171.606816] wlan0: authenticate with 00:23:97:ea:81:70
[49171.608343] wlan0: send auth to 00:23:97:ea:81:70 (try 1/3)
[49171.630364] wlan0: send auth to 00:23:97:ea:81:70 (try 2/3)
[49171.692442] wlan0: authenticated
[49171.692662] iwlwifi 0000:0c:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[49171.692665] iwlwifi 0000:0c:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[49171.692668] iwlwifi 0000:0c:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[49171.696121] wlan0: associate with 00:23:97:ea:81:70 (try 1/3)
[49171.701706] wlan0: RX AssocResp from 00:23:97:ea:81:70 (capab=0x411 status=0 aid=3)
[49171.713808] wlan0: associated
[49171.713872] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[49855.699855] type=1400 audit(1415408175.931:82): apparmor="STATUS" operation="profile_replace" parent=23610 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=23614 comm="apparmor_parser"
[49855.699865] type=1400 audit(1415408175.931:83): apparmor="STATUS" operation="profile_replace" parent=23610 profile="unconfined" name="/usr/sbin/cupsd" pid=23614 comm="apparmor_parser"
[49855.700591] type=1400 audit(1415408175.935:84): apparmor="STATUS" operation="profile_replace" parent=23610 profile="unconfined" name="/usr/sbin/cupsd" pid=23614 comm="apparmor_parser"
[50272.496611] wlan0: deauthenticating from 00:23:97:ea:81:70 by local choice (reason=3)
[50272.506779] cfg80211: Calling CRDA to update world regulatory domain
[50272.510280] cfg80211: World regulatory domain updated:
[50272.510283] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[50272.510285] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[50272.510287] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[50272.510289] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[50272.510291] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[50272.510293] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[50275.975713] PM: Syncing filesystems ... done.
[50276.118754] PM: Preparing system for mem sleep
[50276.119135] Freezing user space processes ... (elapsed 0.001 seconds) done.
[50276.120961] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[50276.122175] PM: Entering mem sleep
[50276.122189] Suspending console(s) (use no_console_suspend to debug)
[50276.122504] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[50276.126675] sd 0:0:0:0: [sda] Stopping disk
[50277.140296] PM: suspend of devices complete after 1017.884 msecs
[50277.140573] PM: late suspend of devices complete after 0.274 msecs
[50277.160837] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[50277.180652] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[50277.185291] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[50277.189901] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[50277.194688] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[50277.212767] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
[50277.217385] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
[50277.222001] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[50277.222043]  pci0000:00: System wakeup enabled by ACPI
[50277.236066] PM: noirq suspend of devices complete after 95.490 msecs
[50277.236708] ACPI: Preparing to enter system sleep state S3
[50277.247632] PM: Saving platform NVS memory
[50277.247633] Disabling non-boot CPUs ...
[50277.248965] smpboot: CPU 1 is now offline
[50277.249160] ACPI: Low-level resume complete
[50277.249160] PM: Restoring platform NVS memory
[50277.249160] Enabling non-boot CPUs ...
[50277.249160] smpboot: Booting Node 0 Processor 1 APIC 0x1
[50277.248950] Initializing CPU#1
[50277.261319] CPU1 is up
[50277.264231] ACPI: Waking up from system sleep state S3
[50277.312733] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[50277.317193] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
[50277.321599] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
[50277.340628] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[50277.360811] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[50277.365105] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[50277.369689] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[50277.389569] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[50277.420297] PM: noirq resume of devices complete after 125.018 msecs
[50277.420434] PM: early resume of devices complete after 0.109 msecs
[50277.420460]  pci0000:00: System wakeup disabled by ACPI
[50277.420469] e1000e 0000:00:19.0: setting latency timer to 64
[50277.420495] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[50277.420720] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[50277.420744] usb usb3: root hub lost power or was reset
[50277.420949] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[50277.420972] usb usb4: root hub lost power or was reset
[50277.421178] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[50277.421200] usb usb5: root hub lost power or was reset
[50277.421407] ehci-pci 0000:00:1a.7: setting latency timer to 64
[50277.421637] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[50277.421883] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[50277.421908] usb usb6: root hub lost power or was reset
[50277.422112] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[50277.422135] usb usb7: root hub lost power or was reset
[50277.422337] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[50277.422360] usb usb8: root hub lost power or was reset
[50277.422474] pci 0000:00:1e.0: setting latency timer to 64
[50277.422486] ahci 0000:00:1f.2: setting latency timer to 64
[50277.422567] ehci-pci 0000:00:1d.7: setting latency timer to 64
[50277.756091] ata6: SATA link down (SStatus 0 SControl 300)
[50277.764098] ata5: SATA link down (SStatus 0 SControl 300)
[50277.920092] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[50277.988491] ata2.00: configured for UDMA/100
[50278.286372] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input31
[50280.600050] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[50280.785695] ata1.00: configured for UDMA/133
[50280.812277] sd 0:0:0:0: [sda] Starting disk
[50281.008561] PM: resume of devices complete after 3588.122 msecs
[50281.008818] PM: Finishing wakeup.
[50281.008819] Restarting tasks ... done.
[50281.076416] video LNXVIDEO:00: Restoring backlight state
[50281.396072] usb 5-1: USB disconnect, device number 25
[50281.452247] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[50281.556077] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[50281.556220] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[50281.557101] iwlwifi 0000:0c:00.0: L1 Enabled; Disabling L0S
[50281.561713] iwlwifi 0000:0c:00.0: Radio type=0x1-0x2-0x0
[50281.588174] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[50281.644985] usb 5-1: new full-speed USB device number 26 using uhci_hcd
[50288.070120] wlan0: authenticate with 00:23:97:ea:81:70
[50288.071745] wlan0: send auth to 00:23:97:ea:81:70 (try 1/3)
[50288.096007] wlan0: send auth to 00:23:97:ea:81:70 (try 2/3)
[50288.099683] wlan0: authenticated
[50288.100054] iwlwifi 0000:0c:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[50288.100065] iwlwifi 0000:0c:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[50288.100075] iwlwifi 0000:0c:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[50288.104241] wlan0: associate with 00:23:97:ea:81:70 (try 1/3)
[50288.111256] wlan0: RX AssocResp from 00:23:97:ea:81:70 (capab=0x411 status=0 aid=3)
[50288.115979] wlan0: associated
[50288.116073] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[50296.768336] usb 5-1: device descriptor read/64, error -110
[50311.996306] usb 5-1: device descriptor read/64, error -110
[50312.212322] usb 5-1: new full-speed USB device number 27 using uhci_hcd
[50312.392350] usb 5-1: New USB device found, idVendor=0a5c, idProduct=5800
[50312.392362] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[50312.392370] usb 5-1: Product: 5880
[50312.392377] usb 5-1: Manufacturer: Broadcom Corp
[50312.392383] usb 5-1: SerialNumber: 0123456789ABCD
[50312.392721] usb 5-1: config 0 descriptor??
[51534.141869] wlan0: deauthenticating from 00:23:97:ea:81:70 by local choice (reason=3)
[51534.159345] cfg80211: Calling CRDA to update world regulatory domain
[51534.166551] cfg80211: World regulatory domain updated:
[51534.166555] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[51534.166557] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[51534.166559] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[51534.166560] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[51534.166562] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[51534.166564] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[51534.994594] init: anacron main process (24183) killed by TERM signal
[51538.108633] PM: Syncing filesystems ... done.
[51538.400472] PM: Preparing system for mem sleep
[51538.400862] Freezing user space processes ... (elapsed 0.001 seconds) done.
[51538.402569] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[51538.403927] PM: Entering mem sleep
[51538.403940] Suspending console(s) (use no_console_suspend to debug)
[51538.404293] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[51538.445971] sd 0:0:0:0: [sda] Stopping disk
[51539.460297] PM: suspend of devices complete after 1056.109 msecs
[51539.460584] PM: late suspend of devices complete after 0.283 msecs
[51539.481067] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[51539.500836] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[51539.505669] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[51539.510618] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[51539.515714] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[51539.532848] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
[51539.537689] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
[51539.542588] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[51539.542630]  pci0000:00: System wakeup enabled by ACPI
[51539.556066] PM: noirq suspend of devices complete after 95.479 msecs
[51539.556707] ACPI: Preparing to enter system sleep state S3
[51539.569080] PM: Saving platform NVS memory
[51539.569081] Disabling non-boot CPUs ...
[51539.672019] smpboot: CPU 1 is now offline
[51539.672207] ACPI: Low-level resume complete
[51539.672207] PM: Restoring platform NVS memory
[51539.672207] Enabling non-boot CPUs ...
[51539.672207] smpboot: Booting Node 0 Processor 1 APIC 0x1
[51539.570406] Initializing CPU#1
[51539.684373] CPU1 is up
[51539.687264] ACPI: Waking up from system sleep state S3
[51539.736572] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[51539.741137] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
[51539.745561] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
[51539.764657] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[51539.784780] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[51539.789080] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[51539.793677] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[51539.814039] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[51539.844299] PM: noirq resume of devices complete after 126.070 msecs
[51539.844436] PM: early resume of devices complete after 0.109 msecs
[51539.844465]  pci0000:00: System wakeup disabled by ACPI
[51539.844473] e1000e 0000:00:19.0: setting latency timer to 64
[51539.844499] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[51539.846646] pci 0000:00:1e.0: setting latency timer to 64
[51539.846659] ahci 0000:00:1f.2: setting latency timer to 64
[51539.846803] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[51539.846840] usb usb3: root hub lost power or was reset
[51539.848284] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[51539.848333] usb usb4: root hub lost power or was reset
[51539.848562] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[51539.848611] usb usb5: root hub lost power or was reset
[51539.848889] ehci-pci 0000:00:1a.7: setting latency timer to 64
[51539.849251] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[51539.849570] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[51539.849638] usb usb6: root hub lost power or was reset
[51539.849862] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[51539.849916] usb usb7: root hub lost power or was reset
[51539.850132] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[51539.850182] usb usb8: root hub lost power or was reset
[51539.850403] ehci-pci 0000:00:1d.7: setting latency timer to 64
[51540.184096] ata5: SATA link down (SStatus 0 SControl 300)
[51540.192101] ata6: SATA link down (SStatus 0 SControl 300)
[51540.348084] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[51540.417836] ata2.00: configured for UDMA/100
[51540.718341] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input32
[51543.084224] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[51543.261326] ata1.00: configured for UDMA/133
[51543.288253] sd 0:0:0:0: [sda] Starting disk
[51543.468731] PM: resume of devices complete after 3624.290 msecs
[51543.468982] PM: Finishing wakeup.
[51543.468983] Restarting tasks ... done.
[51543.519210] video LNXVIDEO:00: Restoring backlight state
[51543.860063] usb 5-1: USB disconnect, device number 27
[51544.040962] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[51544.108050] usb 5-1: new full-speed USB device number 28 using uhci_hcd
[51544.144092] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[51544.144291] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[51544.147830] iwlwifi 0000:0c:00.0: L1 Enabled; Disabling L0S
[51544.151103] iwlwifi 0000:0c:00.0: Radio type=0x1-0x2-0x0
[51544.181831] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[51544.291062] usb 5-1: New USB device found, idVendor=0a5c, idProduct=5800
[51544.291066] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[51544.291069] usb 5-1: Product: 5880
[51544.291071] usb 5-1: Manufacturer: Broadcom Corp
[51544.291073] usb 5-1: SerialNumber: 0123456789ABCD
[51544.291177] usb 5-1: config 0 descriptor??
[51550.620314] wlan0: authenticate with 00:23:97:ea:81:70
[51550.632587] wlan0: send auth to 00:23:97:ea:81:70 (try 1/3)
[51550.635438] wlan0: authenticated
[51550.635689] iwlwifi 0000:0c:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[51550.635692] iwlwifi 0000:0c:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[51550.635694] iwlwifi 0000:0c:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[51550.636033] wlan0: associate with 00:23:97:ea:81:70 (try 1/3)
[51550.638279] wlan0: RX AssocResp from 00:23:97:ea:81:70 (capab=0x411 status=0 aid=3)
[51550.640974] wlan0: associated
[51550.640993] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[58154.395658] systemd-hostnamed[25971]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[58802.233069] systemd-hostnamed[26161]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[61515.712350] wlan0: deauthenticating from 00:23:97:ea:81:70 by local choice (reason=3)
[61515.722668] cfg80211: Calling CRDA to update world regulatory domain
[61515.725578] cfg80211: World regulatory domain updated:
[61515.725581] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[61515.725584] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[61515.725585] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[61515.725587] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[61515.725589] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[61515.725591] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[61519.388695] PM: Syncing filesystems ... done.
[61519.573242] PM: Preparing system for mem sleep
[61519.573630] Freezing user space processes ... (elapsed 0.002 seconds) done.
[61519.575689] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[61519.577054] PM: Entering mem sleep
[61519.577068] Suspending console(s) (use no_console_suspend to debug)
[61519.577414] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[61519.607553] sd 0:0:0:0: [sda] Stopping disk
[61520.620299] PM: suspend of devices complete after 1043.006 msecs
[61520.620592] PM: late suspend of devices complete after 0.289 msecs
[61520.640827] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[61520.660631] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[61520.665223] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[61520.669816] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[61520.674583] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[61520.692661] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
[61520.697256] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
[61520.701836] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[61520.701877]  pci0000:00: System wakeup enabled by ACPI
[61520.716066] PM: noirq suspend of devices complete after 95.471 msecs
[61520.716707] ACPI: Preparing to enter system sleep state S3
[61520.728723] PM: Saving platform NVS memory
[61520.728725] Disabling non-boot CPUs ...
[61520.832019] smpboot: CPU 1 is now offline
[61520.832208] ACPI: Low-level resume complete
[61520.832208] PM: Restoring platform NVS memory
[61520.832208] Enabling non-boot CPUs ...
[61520.832208] smpboot: Booting Node 0 Processor 1 APIC 0x1
[61520.730047] Initializing CPU#1
[61520.844379] CPU1 is up
[61520.847270] ACPI: Waking up from system sleep state S3
[61520.896502] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[61520.901083] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
[61520.905605] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
[61520.924722] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[61520.944796] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[61520.949211] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[61520.953694] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[61520.973594] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[61521.004298] PM: noirq resume of devices complete after 126.106 msecs
[61521.004436] PM: early resume of devices complete after 0.109 msecs
[61521.004464]  pci0000:00: System wakeup disabled by ACPI
[61521.004472] e1000e 0000:00:19.0: setting latency timer to 64
[61521.004498] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[61521.004715] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[61521.004740] usb usb3: root hub lost power or was reset
[61521.004945] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[61521.004970] usb usb4: root hub lost power or was reset
[61521.005172] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[61521.005194] usb usb5: root hub lost power or was reset
[61521.005399] ehci-pci 0000:00:1a.7: setting latency timer to 64
[61521.005629] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[61521.005874] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[61521.005899] usb usb6: root hub lost power or was reset
[61521.006101] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[61521.006124] usb usb7: root hub lost power or was reset
[61521.006325] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[61521.006350] usb usb8: root hub lost power or was reset
[61521.006481] pci 0000:00:1e.0: setting latency timer to 64
[61521.006494] ahci 0000:00:1f.2: setting latency timer to 64
[61521.006559] ehci-pci 0000:00:1d.7: setting latency timer to 64
[61521.340094] ata6: SATA link down (SStatus 0 SControl 300)
[61521.348096] ata5: SATA link down (SStatus 0 SControl 300)
[61521.504091] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[61521.573809] ata2.00: configured for UDMA/100
[61521.874358] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input33
[61524.296022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[61524.470253] ata1.00: configured for UDMA/133
[61524.496264] sd 0:0:0:0: [sda] Starting disk
[61524.686993] PM: resume of devices complete after 3682.554 msecs
[61524.687225] PM: Finishing wakeup.
[61524.687226] Restarting tasks ... done.
[61524.733284] video LNXVIDEO:00: Restoring backlight state
[61525.072093] usb 5-1: USB disconnect, device number 28
[61525.293088] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[61525.312049] usb 5-1: new full-speed USB device number 29 using uhci_hcd
[61525.396090] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[61525.396286] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[61525.400924] iwlwifi 0000:0c:00.0: L1 Enabled; Disabling L0S
[61525.403929] iwlwifi 0000:0c:00.0: Radio type=0x1-0x2-0x0
[61525.432694] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[61525.493057] usb 5-1: New USB device found, idVendor=0a5c, idProduct=5800
[61525.493061] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[61525.493064] usb 5-1: Product: 5880
[61525.493066] usb 5-1: Manufacturer: Broadcom Corp
[61525.493068] usb 5-1: SerialNumber: 0123456789ABCD
[61525.493166] usb 5-1: config 0 descriptor??
[61531.665443] wlan0: authenticate with 00:23:97:ea:81:70
[61531.674070] wlan0: send auth to 00:23:97:ea:81:70 (try 1/3)
[61531.676990] wlan0: authenticated
[61531.677097] iwlwifi 0000:0c:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[61531.677101] iwlwifi 0000:0c:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[61531.677103] iwlwifi 0000:0c:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[61531.680025] wlan0: associate with 00:23:97:ea:81:70 (try 1/3)
[61531.682258] wlan0: RX AssocResp from 00:23:97:ea:81:70 (capab=0x411 status=0 aid=1)
[61531.684834] wlan0: associated
[61531.684854] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[61701.774229] wlan0: deauthenticating from 00:23:97:ea:81:70 by local choice (reason=3)
[61701.792180] cfg80211: Calling CRDA to update world regulatory domain
[61701.796664] cfg80211: World regulatory domain updated:
[61701.796667] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[61701.796669] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[61701.796671] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[61701.796673] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[61701.796675] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[61701.796677] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[61705.444266] PM: Syncing filesystems ... done.
[61705.755029] PM: Preparing system for mem sleep
[61705.755422] Freezing user space processes ... (elapsed 0.001 seconds) done.
[61705.757352] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[61705.758727] PM: Entering mem sleep
[61705.758740] Suspending console(s) (use no_console_suspend to debug)
[61705.759062] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[61705.847991] sd 0:0:0:0: [sda] Stopping disk
[61706.864314] PM: suspend of devices complete after 1105.354 msecs
[61706.864610] PM: late suspend of devices complete after 0.293 msecs
[61706.884854] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[61706.904618] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[61706.909242] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[61706.913837] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[61706.918604] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[61706.936700] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
[61706.941297] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
[61706.947252] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[61706.947294]  pci0000:00: System wakeup enabled by ACPI
[61706.960073] PM: noirq suspend of devices complete after 95.459 msecs
[61706.960713] ACPI: Preparing to enter system sleep state S3
[61706.971714] PM: Saving platform NVS memory
[61706.971715] Disabling non-boot CPUs ...
[61706.973055] smpboot: CPU 1 is now offline
[61706.973230] ACPI: Low-level resume complete
[61706.973230] PM: Restoring platform NVS memory
[61706.973230] Enabling non-boot CPUs ...
[61706.973230] smpboot: Booting Node 0 Processor 1 APIC 0x1
[61706.973039] Initializing CPU#1
[61706.985411] CPU1 is up
[61706.988325] ACPI: Waking up from system sleep state S3
[61707.036657] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[61707.041076] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
[61707.045539] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
[61707.064569] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[61707.084744] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[61707.089207] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[61707.093755] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[61707.113466] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[61707.144305] PM: noirq resume of devices complete after 125.607 msecs
[61707.144442] PM: early resume of devices complete after 0.109 msecs
[61707.144472]  pci0000:00: System wakeup disabled by ACPI
[61707.144481] e1000e 0000:00:19.0: setting latency timer to 64
[61707.144506] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[61707.144814] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[61707.144838] usb usb3: root hub lost power or was reset
[61707.145047] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[61707.145069] usb usb4: root hub lost power or was reset
[61707.145272] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[61707.145295] usb usb5: root hub lost power or was reset
[61707.145503] ehci-pci 0000:00:1a.7: setting latency timer to 64
[61707.145731] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[61707.145982] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[61707.146005] usb usb6: root hub lost power or was reset
[61707.146207] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[61707.146229] usb usb7: root hub lost power or was reset
[61707.146435] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[61707.146458] usb usb8: root hub lost power or was reset
[61707.146663] ehci-pci 0000:00:1d.7: setting latency timer to 64
[61707.146681] pci 0000:00:1e.0: setting latency timer to 64
[61707.146694] ahci 0000:00:1f.2: setting latency timer to 64
[61707.484097] ata5: SATA link down (SStatus 0 SControl 300)
[61707.492105] ata6: SATA link down (SStatus 0 SControl 300)
[61707.648087] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[61707.717060] ata2.00: configured for UDMA/100
[61708.014749] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input34
[61710.440303] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[61710.636110] ata1.00: configured for UDMA/133
[61710.660260] sd 0:0:0:0: [sda] Starting disk
[61710.835428] PM: resume of devices complete after 3690.981 msecs
[61710.835680] PM: Finishing wakeup.
[61710.835681] Restarting tasks ... done.
[61710.880875] video LNXVIDEO:00: Restoring backlight state
[61711.236095] usb 5-1: USB disconnect, device number 29
[61711.264247] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[61711.368085] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[61711.368217] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[61711.369127] iwlwifi 0000:0c:00.0: L1 Enabled; Disabling L0S
[61711.372834] iwlwifi 0000:0c:00.0: Radio type=0x1-0x2-0x0
[61711.407976] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[61711.476032] usb 5-1: new full-speed USB device number 30 using uhci_hcd
[61717.510106] wlan0: authenticate with 00:23:97:ea:81:70
[61717.513648] wlan0: send auth to 00:23:97:ea:81:70 (try 1/3)
[61717.516550] wlan0: authenticated
[61717.516931] iwlwifi 0000:0c:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[61717.516941] iwlwifi 0000:0c:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[61717.516948] iwlwifi 0000:0c:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[61717.520557] wlan0: associate with 00:23:97:ea:81:70 (try 1/3)
[61717.522867] wlan0: RX AssocResp from 00:23:97:ea:81:70 (capab=0x411 status=0 aid=1)
[61717.528030] wlan0: associated
[61717.528058] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[61726.600319] usb 5-1: device descriptor read/64, error -110
[61741.828306] usb 5-1: device descriptor read/64, error -110
[61742.044339] usb 5-1: new full-speed USB device number 31 using uhci_hcd
[61742.225322] usb 5-1: New USB device found, idVendor=0a5c, idProduct=5800
[61742.225328] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[61742.225332] usb 5-1: Product: 5880
[61742.225335] usb 5-1: Manufacturer: Broadcom Corp
[61742.225338] usb 5-1: SerialNumber: 0123456789ABCD
[61742.225518] usb 5-1: config 0 descriptor??
[64258.279597] wlan0: deauthenticating from 00:23:97:ea:81:70 by local choice (reason=3)
[64259.211097] cfg80211: Calling CRDA to update world regulatory domain
[64259.238417] cfg80211: World regulatory domain updated:
[64259.238422] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[64259.238424] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[64259.238427] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[64259.238428] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[64259.238430] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[64259.238432] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[64262.798440] PM: Syncing filesystems ... done.
[64262.982565] PM: Preparing system for mem sleep
[64262.982951] Freezing user space processes ... (elapsed 0.001 seconds) done.
[64262.984821] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[64262.986168] PM: Entering mem sleep
[64262.986182] Suspending console(s) (use no_console_suspend to debug)
[64262.986541] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[64263.015997] sd 0:0:0:0: [sda] Stopping disk
[64264.028300] PM: suspend of devices complete after 1041.891 msecs
[64264.028593] PM: late suspend of devices complete after 0.289 msecs
[64264.049078] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[64264.069822] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[64264.074430] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[64264.079094] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[64264.083846] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[64264.100616] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
[64264.105209] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
[64264.109914] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[64264.109955]  pci0000:00: System wakeup enabled by ACPI
[64264.124066] PM: noirq suspend of devices complete after 95.470 msecs
[64264.124707] ACPI: Preparing to enter system sleep state S3
[64264.135798] PM: Saving platform NVS memory
[64264.135799] Disabling non-boot CPUs ...
[64264.240018] smpboot: CPU 1 is now offline
[64264.240202] ACPI: Low-level resume complete
[64264.240202] PM: Restoring platform NVS memory
[64264.240202] Enabling non-boot CPUs ...
[64264.240202] smpboot: Booting Node 0 Processor 1 APIC 0x1
[64264.137124] Initializing CPU#1
[64264.252386] CPU1 is up
[64264.255277] ACPI: Waking up from system sleep state S3
[64264.304480] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[64264.309059] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
[64264.313506] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
[64264.332474] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[64264.352941] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[64264.357271] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[64264.361761] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[64264.381565] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[64264.412299] PM: noirq resume of devices complete after 126.279 msecs
[64264.412436] PM: early resume of devices complete after 0.109 msecs
[64264.412465]  pci0000:00: System wakeup disabled by ACPI
[64264.412474] e1000e 0000:00:19.0: setting latency timer to 64
[64264.412500] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[64264.414752] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[64264.414778] usb usb3: root hub lost power or was reset
[64264.414882] pci 0000:00:1e.0: setting latency timer to 64
[64264.414895] ahci 0000:00:1f.2: setting latency timer to 64
[64264.414933] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[64264.414968] usb usb4: root hub lost power or was reset
[64264.415506] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[64264.415542] usb usb5: root hub lost power or was reset
[64264.415781] ehci-pci 0000:00:1a.7: setting latency timer to 64
[64264.416170] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[64264.416487] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[64264.416537] usb usb6: root hub lost power or was reset
[64264.416778] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[64264.416827] usb usb7: root hub lost power or was reset
[64264.417078] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[64264.417144] usb usb8: root hub lost power or was reset
[64264.418576] ehci-pci 0000:00:1d.7: setting latency timer to 64
[64264.744093] ata6: SATA link down (SStatus 0 SControl 300)
[64264.752091] ata5: SATA link down (SStatus 0 SControl 300)
[64264.932092] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[64265.001806] ata2.00: configured for UDMA/100
[64265.294530] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input35
[64267.652022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[64267.831854] ata1.00: configured for UDMA/133
[64267.856246] sd 0:0:0:0: [sda] Starting disk
[64268.038042] PM: resume of devices complete after 3625.601 msecs
[64268.038270] PM: Finishing wakeup.
[64268.038271] Restarting tasks ... done.
[64268.093813] video LNXVIDEO:00: Restoring backlight state
[64268.428076] usb 5-1: USB disconnect, device number 31
[64268.649347] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[64268.668050] usb 5-1: new full-speed USB device number 32 using uhci_hcd
[64268.752108] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[64268.752303] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[64268.756894] iwlwifi 0000:0c:00.0: L1 Enabled; Disabling L0S
[64268.759891] iwlwifi 0000:0c:00.0: Radio type=0x1-0x2-0x0
[64268.788770] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[64268.851229] usb 5-1: New USB device found, idVendor=0a5c, idProduct=5800
[64268.851234] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[64268.851236] usb 5-1: Product: 5880
[64268.851238] usb 5-1: Manufacturer: Broadcom Corp
[64268.851241] usb 5-1: SerialNumber: 0123456789ABCD
[64268.851340] usb 5-1: config 0 descriptor??
[64274.973418] wlan0: authenticate with 00:23:97:ea:81:70
[64274.980575] wlan0: send auth to 00:23:97:ea:81:70 (try 1/3)
[64274.982772] wlan0: authenticated
[64274.983091] iwlwifi 0000:0c:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[64274.983095] iwlwifi 0000:0c:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[64274.983097] iwlwifi 0000:0c:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[64274.984402] wlan0: associate with 00:23:97:ea:81:70 (try 1/3)
[64274.986650] wlan0: RX AssocResp from 00:23:97:ea:81:70 (capab=0x411 status=0 aid=1)
[64274.989230] wlan0: associated
[64274.989253] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[64542.931222] systemd-hostnamed[29839]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[66352.036175] wlan0: deauthenticating from 00:23:97:ea:81:70 by local choice (reason=3)
[66352.059284] cfg80211: Calling CRDA to update world regulatory domain
[66352.088514] cfg80211: World regulatory domain updated:
[66352.088518] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[66352.088520] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[66352.088522] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[66352.088524] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[66352.088526] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[66352.088528] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[66355.763485] PM: Syncing filesystems ... done.
[66355.964925] PM: Preparing system for mem sleep
[66355.965335] Freezing user space processes ... (elapsed 0.002 seconds) done.
[66355.967392] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[66355.968295] PM: Entering mem sleep
[66355.968308] Suspending console(s) (use no_console_suspend to debug)
[66355.968648] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[66356.020001] sd 0:0:0:0: [sda] Stopping disk
[66357.032299] PM: suspend of devices complete after 1063.774 msecs
[66357.032595] PM: late suspend of devices complete after 0.293 msecs
[66357.052878] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[66357.072604] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[66357.077198] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[66357.081778] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[66357.086531] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[66357.105818] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
[66357.110406] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
[66357.114993] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[66357.115034]  pci0000:00: System wakeup enabled by ACPI
[66357.128066] PM: noirq suspend of devices complete after 95.468 msecs
[66357.128707] ACPI: Preparing to enter system sleep state S3
[66357.139465] PM: Saving platform NVS memory
[66357.139467] Disabling non-boot CPUs ...
[66357.140802] smpboot: CPU 1 is now offline
[66357.140989] ACPI: Low-level resume complete
[66357.140989] PM: Restoring platform NVS memory
[66357.140989] Enabling non-boot CPUs ...
[66357.140989] smpboot: Booting Node 0 Processor 1 APIC 0x1
[66357.140788] Initializing CPU#1
[66357.153150] CPU1 is up
[66357.156063] ACPI: Waking up from system sleep state S3
[66357.204532] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[66357.208980] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
[66357.213754] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
[66357.232431] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[66357.252986] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[66357.257293] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[66357.261846] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[66357.281774] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[66357.312296] PM: noirq resume of devices complete after 125.829 msecs
[66357.312433] PM: early resume of devices complete after 0.109 msecs
[66357.312460]  pci0000:00: System wakeup disabled by ACPI
[66357.312469] e1000e 0000:00:19.0: setting latency timer to 64
[66357.312495] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[66357.312717] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[66357.312741] usb usb3: root hub lost power or was reset
[66357.312947] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[66357.312971] usb usb4: root hub lost power or was reset
[66357.313174] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[66357.313197] usb usb5: root hub lost power or was reset
[66357.313402] ehci-pci 0000:00:1a.7: setting latency timer to 64
[66357.313633] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[66357.313879] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[66357.313903] usb usb6: root hub lost power or was reset
[66357.314107] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[66357.314129] usb usb7: root hub lost power or was reset
[66357.314332] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[66357.314357] usb usb8: root hub lost power or was reset
[66357.314474] pci 0000:00:1e.0: setting latency timer to 64
[66357.314487] ahci 0000:00:1f.2: setting latency timer to 64
[66357.314563] ehci-pci 0000:00:1d.7: setting latency timer to 64
[66357.648094] ata6: SATA link down (SStatus 0 SControl 300)
[66357.656098] ata5: SATA link down (SStatus 0 SControl 300)
[66357.812092] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[66357.880475] ata2.00: configured for UDMA/100
[66358.146375] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input36
[66360.492230] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[66360.669238] ata1.00: configured for UDMA/133
[66360.696278] sd 0:0:0:0: [sda] Starting disk
[66360.875659] PM: resume of devices complete after 3563.222 msecs
[66360.875890] PM: Finishing wakeup.
[66360.875891] Restarting tasks ... done.
[66360.925285] video LNXVIDEO:00: Restoring backlight state
[66361.264060] usb 5-1: USB disconnect, device number 32
[66361.480519] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[66361.504050] usb 5-1: new full-speed USB device number 33 using uhci_hcd
[66361.584093] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[66361.584294] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[66361.588962] iwlwifi 0000:0c:00.0: L1 Enabled; Disabling L0S
[66361.592018] iwlwifi 0000:0c:00.0: Radio type=0x1-0x2-0x0
[66361.621569] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[66361.686071] usb 5-1: New USB device found, idVendor=0a5c, idProduct=5800
[66361.686075] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[66361.686077] usb 5-1: Product: 5880
[66361.686079] usb 5-1: Manufacturer: Broadcom Corp
[66361.686082] usb 5-1: SerialNumber: 0123456789ABCD
[66361.686179] usb 5-1: config 0 descriptor??
[66368.133292] wlan0: authenticate with 00:23:97:ea:81:70
[66368.134414] wlan0: send auth to 00:23:97:ea:81:70 (try 1/3)
[66368.137178] wlan0: authenticated
[66368.137421] iwlwifi 0000:0c:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[66368.137430] iwlwifi 0000:0c:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[66368.137437] iwlwifi 0000:0c:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[66368.140911] wlan0: associate with 00:23:97:ea:81:70 (try 1/3)
[66368.143118] wlan0: RX AssocResp from 00:23:97:ea:81:70 (capab=0x411 status=0 aid=4)
[66368.145893] wlan0: associated
[66368.145914] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[66786.904507] iwlwifi 0000:0c:00.0: RF_KILL bit toggled to disable radio.
[66786.904582] wlan0: deauthenticating from 00:23:97:ea:81:70 by local choice (reason=3)
[66786.905471] iwlwifi 0000:0c:00.0: Not sending command - RF KILL
[66786.905476] iwlwifi 0000:0c:00.0: Not sending command - RF KILL
[66786.905481] iwlwifi 0000:0c:00.0: Not sending command - RF KILL
[66786.905509] iwlwifi 0000:0c:00.0: Not sending command - RF KILL
[66786.905516] iwlwifi 0000:0c:00.0: Not sending command - RF KILL
[66786.940025] iwlwifi 0000:0c:00.0: Not sending command - RF KILL
[66786.941162] cfg80211: Calling CRDA to update world regulatory domain
[66786.942437] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[66786.944852] cfg80211: World regulatory domain updated:
[66786.944855] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[66786.944857] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[66786.944859] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[66786.944861] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[66786.944862] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[66786.944864] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[66787.359138] iwlwifi 0000:0c:00.0: RF_KILL bit toggled to enable radio.
[66787.362149] iwlwifi 0000:0c:00.0: L1 Enabled; Disabling L0S
[66787.365270] iwlwifi 0000:0c:00.0: Radio type=0x1-0x2-0x0
[66787.396765] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[66793.959731] wlan0: authenticate with 00:23:97:ea:81:70
[66793.961646] wlan0: send auth to 00:23:97:ea:81:70 (try 1/3)
[66793.964895] wlan0: authenticated
[66793.967826] iwlwifi 0000:0c:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[66793.967829] iwlwifi 0000:0c:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[66793.967832] iwlwifi 0000:0c:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[66793.968091] wlan0: associate with 00:23:97:ea:81:70 (try 1/3)
[66793.970614] wlan0: RX AssocResp from 00:23:97:ea:81:70 (capab=0x411 status=0 aid=4)
[66793.975294] wlan0: associated
[66793.975326] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[68772.281576] wlan0: deauthenticating from 00:23:97:ea:81:70 by local choice (reason=3)
[68772.291634] cfg80211: Calling CRDA to update world regulatory domain
[68772.771374] cfg80211: World regulatory domain updated:
[68772.771383] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[68772.771390] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[68772.771396] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[68772.771402] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[68772.771408] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[68772.771413] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[68777.396305] PM: Syncing filesystems ... done.
[68777.745280] PM: Preparing system for mem sleep
[68777.745711] Freezing user space processes ... (elapsed 0.004 seconds) done.
[68777.749745] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[68777.751120] PM: Entering mem sleep
[68777.751133] Suspending console(s) (use no_console_suspend to debug)
[68777.751447] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[68777.782449] sd 0:0:0:0: [sda] Stopping disk
[68778.796248] PM: suspend of devices complete after 1044.892 msecs
[68778.796557] PM: late suspend of devices complete after 0.306 msecs
[68778.816862] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[68778.836704] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[68778.841295] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[68778.845887] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[68778.850643] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[68778.868643] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
[68778.874707] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
[68778.879396] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[68778.879437]  pci0000:00: System wakeup enabled by ACPI
[68778.892066] PM: noirq suspend of devices complete after 95.505 msecs
[68778.892707] ACPI: Preparing to enter system sleep state S3
[68778.904292] PM: Saving platform NVS memory
[68778.904293] Disabling non-boot CPUs ...
[68779.008025] smpboot: CPU 1 is now offline
[68779.008227] ACPI: Low-level resume complete
[68779.008227] PM: Restoring platform NVS memory
[68779.008227] Enabling non-boot CPUs ...
[68779.008227] smpboot: Booting Node 0 Processor 1 APIC 0x1
[68778.905616] Initializing CPU#1
[68779.020392] CPU1 is up
[68779.023284] ACPI: Waking up from system sleep state S3
[68779.072720] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[68779.077210] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
[68779.081760] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
[68779.100406] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[68779.122201] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[68779.126774] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[68779.131344] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[68779.149813] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[68779.180299] PM: noirq resume of devices complete after 125.610 msecs
[68779.180437] PM: early resume of devices complete after 0.109 msecs
[68779.180465]  pci0000:00: System wakeup disabled by ACPI
[68779.180474] e1000e 0000:00:19.0: setting latency timer to 64
[68779.180500] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[68779.180826] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[68779.180850] usb usb3: root hub lost power or was reset
[68779.181058] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[68779.181084] usb usb4: root hub lost power or was reset
[68779.181286] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[68779.181323] usb usb5: root hub lost power or was reset
[68779.181528] ehci-pci 0000:00:1a.7: setting latency timer to 64
[68779.181758] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[68779.182007] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[68779.182034] usb usb6: root hub lost power or was reset
[68779.182235] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[68779.182258] usb usb7: root hub lost power or was reset
[68779.182465] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[68779.182488] usb usb8: root hub lost power or was reset
[68779.182556] pci 0000:00:1e.0: setting latency timer to 64
[68779.182568] ahci 0000:00:1f.2: setting latency timer to 64
[68779.182695] ehci-pci 0000:00:1d.7: setting latency timer to 64
[68779.516093] ata6: SATA link down (SStatus 0 SControl 300)
[68779.524099] ata5: SATA link down (SStatus 0 SControl 300)
[68779.680091] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[68779.750807] ata2.00: configured for UDMA/100
[68780.054593] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input37
[68782.416224] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[68782.591855] ata1.00: configured for UDMA/133
[68782.616074] sd 0:0:0:0: [sda] Starting disk
[68782.791082] PM: resume of devices complete after 3610.640 msecs
[68782.791307] PM: Finishing wakeup.
[68782.791308] Restarting tasks ... done.
[68782.891698] video LNXVIDEO:00: Restoring backlight state
[68783.196082] usb 5-1: USB disconnect, device number 33
[68783.436035] usb 5-1: new full-speed USB device number 34 using uhci_hcd
[68783.778473] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[68783.880097] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[68783.880233] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[68783.881116] iwlwifi 0000:0c:00.0: L1 Enabled; Disabling L0S
[68783.886025] iwlwifi 0000:0c:00.0: Radio type=0x1-0x2-0x0
[68783.913377] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[68790.214754] wlan0: authenticate with 00:23:97:ea:81:70
[68790.217473] wlan0: send auth to 00:23:97:ea:81:70 (try 1/3)
[68790.220168] wlan0: authenticated
[68790.220754] iwlwifi 0000:0c:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[68790.220764] iwlwifi 0000:0c:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[68790.220771] iwlwifi 0000:0c:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[68790.224130] wlan0: associate with 00:23:97:ea:81:70 (try 1/3)
[68790.226330] wlan0: RX AssocResp from 00:23:97:ea:81:70 (capab=0x411 status=0 aid=4)
[68790.230166] wlan0: associated
[68790.230201] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[68798.560316] usb 5-1: device descriptor read/64, error -110
[68813.788142] usb 5-1: device descriptor read/64, error -110
[68814.008305] usb 5-1: new full-speed USB device number 35 using uhci_hcd
[68814.188132] usb 5-1: New USB device found, idVendor=0a5c, idProduct=5800
[68814.188144] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[68814.188152] usb 5-1: Product: 5880
[68814.188159] usb 5-1: Manufacturer: Broadcom Corp
[68814.188166] usb 5-1: SerialNumber: 0123456789ABCD
[68814.188513] usb 5-1: config 0 descriptor??
[69794.158291] wlan0: deauthenticating from 00:23:97:ea:81:70 by local choice (reason=3)
[69794.166178] cfg80211: Calling CRDA to update world regulatory domain
[69794.173634] cfg80211: World regulatory domain updated:
[69794.173638] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[69794.173640] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[69794.173643] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[69794.173644] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[69794.173646] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[69794.173648] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[69797.799190] PM: Syncing filesystems ... done.
[69798.036902] PM: Preparing system for mem sleep
[69798.037249] Freezing user space processes ... (elapsed 0.001 seconds) done.
[69798.039063] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[69798.040131] PM: Entering mem sleep
[69798.040144] Suspending console(s) (use no_console_suspend to debug)
[69798.040468] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[69798.069513] sd 0:0:0:0: [sda] Stopping disk
[69799.084297] PM: suspend of devices complete after 1043.930 msecs
[69799.084594] PM: late suspend of devices complete after 0.294 msecs
[69799.104957] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[69799.124636] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[69799.129273] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[69799.133891] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[69799.138677] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[69799.156704] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
[69799.162671] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
[69799.167284] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[69799.167324]  pci0000:00: System wakeup enabled by ACPI
[69799.180067] PM: noirq suspend of devices complete after 95.469 msecs
[69799.180708] ACPI: Preparing to enter system sleep state S3
[69799.191863] PM: Saving platform NVS memory
[69799.191865] Disabling non-boot CPUs ...
[69799.296023] smpboot: CPU 1 is now offline
[69799.296220] ACPI: Low-level resume complete
[69799.296220] PM: Restoring platform NVS memory
[69799.296220] Enabling non-boot CPUs ...
[69799.296220] smpboot: Booting Node 0 Processor 1 APIC 0x1
[69799.193186] Initializing CPU#1
[69799.308393] CPU1 is up
[69799.311284] ACPI: Waking up from system sleep state S3
[69799.360709] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[69799.365281] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
[69799.369805] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
[69799.388376] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[69799.408853] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[69799.413440] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[69799.417969] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[69799.437327] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[69799.468299] PM: noirq resume of devices complete after 125.987 msecs
[69799.468437] PM: early resume of devices complete after 0.110 msecs
[69799.468465]  pci0000:00: System wakeup disabled by ACPI
[69799.468474] e1000e 0000:00:19.0: setting latency timer to 64
[69799.468500] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[69799.470623] pci 0000:00:1e.0: setting latency timer to 64
[69799.470636] ahci 0000:00:1f.2: setting latency timer to 64
[69799.470789] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[69799.470826] usb usb3: root hub lost power or was reset
[69799.471083] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[69799.471128] usb usb4: root hub lost power or was reset
[69799.471387] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[69799.471430] usb usb5: root hub lost power or was reset
[69799.471652] ehci-pci 0000:00:1a.7: setting latency timer to 64
[69799.471915] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[69799.472257] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[69799.472308] usb usb6: root hub lost power or was reset
[69799.472616] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[69799.472665] usb usb7: root hub lost power or was reset
[69799.472973] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[69799.473039] usb usb8: root hub lost power or was reset
[69799.473485] ehci-pci 0000:00:1d.7: setting latency timer to 64
[69799.808095] ata5: SATA link down (SStatus 0 SControl 300)
[69799.816100] ata6: SATA link down (SStatus 0 SControl 300)
[69799.972082] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[69800.046638] ata2.00: configured for UDMA/100
[69800.338501] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input38
[69802.708221] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[69802.931775] ata1.00: configured for UDMA/133
[69802.956262] sd 0:0:0:0: [sda] Starting disk
[69803.131156] PM: resume of devices complete after 3662.714 msecs
[69803.131405] PM: Finishing wakeup.
[69803.131407] Restarting tasks ... done.
[69803.232930] video LNXVIDEO:00: Restoring backlight state
[69803.520080] usb 5-1: USB disconnect, device number 35
[69803.736499] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[69803.760054] usb 5-1: new full-speed USB device number 36 using uhci_hcd
[69803.840089] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[69803.840280] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[69803.844664] iwlwifi 0000:0c:00.0: L1 Enabled; Disabling L0S
[69803.847684] iwlwifi 0000:0c:00.0: Radio type=0x1-0x2-0x0
[69803.876546] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[69803.941047] usb 5-1: New USB device found, idVendor=0a5c, idProduct=5800
[69803.941051] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[69803.941054] usb 5-1: Product: 5880
[69803.941056] usb 5-1: Manufacturer: Broadcom Corp
[69803.941058] usb 5-1: SerialNumber: 0123456789ABCD
[69803.941157] usb 5-1: config 0 descriptor??
[69810.285019] wlan0: authenticate with 00:23:97:ea:81:70
[69810.297656] wlan0: send auth to 00:23:97:ea:81:70 (try 1/3)
[69810.307261] wlan0: authenticated
[69810.307422] iwlwifi 0000:0c:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[69810.307425] iwlwifi 0000:0c:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[69810.307427] iwlwifi 0000:0c:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[69810.308362] wlan0: associate with 00:23:97:ea:81:70 (try 1/3)
[69810.315766] wlan0: RX AssocResp from 00:23:97:ea:81:70 (capab=0x411 status=0 aid=5)
[69810.318413] wlan0: associated
[69810.318439] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[76939.421185] iwlwifi 0000:0c:00.0: RF_KILL bit toggled to disable radio.
[76939.421329] wlan0: deauthenticating from 00:23:97:ea:81:70 by local choice (reason=3)
[76939.428218] iwlwifi 0000:0c:00.0: Not sending command - RF KILL
[76939.428231] iwlwifi 0000:0c:00.0: Not sending command - RF KILL
[76939.428244] iwlwifi 0000:0c:00.0: Not sending command - RF KILL
[76939.428281] iwlwifi 0000:0c:00.0: Not sending command - RF KILL
[76939.428301] iwlwifi 0000:0c:00.0: Not sending command - RF KILL
[76939.468040] iwlwifi 0000:0c:00.0: Not sending command - RF KILL
[76939.468734] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[76939.471023] cfg80211: Calling CRDA to update world regulatory domain
[76939.474285] cfg80211: World regulatory domain updated:
[76939.474288] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[76939.474290] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[76939.474292] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[76939.474294] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[76939.474296] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[76939.474298] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[76939.945030] iwlwifi 0000:0c:00.0: RF_KILL bit toggled to enable radio.
[76939.947454] iwlwifi 0000:0c:00.0: L1 Enabled; Disabling L0S
[76939.950545] iwlwifi 0000:0c:00.0: Radio type=0x1-0x2-0x0
[76939.985070] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[76946.200205] wlan0: authenticate with 00:23:97:ea:81:70
[76946.202761] wlan0: send auth to 00:23:97:ea:81:70 (try 1/3)
[76946.205491] wlan0: authenticated
[76946.207002] iwlwifi 0000:0c:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[76946.207012] iwlwifi 0000:0c:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[76946.207019] iwlwifi 0000:0c:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[76946.208050] wlan0: associate with 00:23:97:ea:81:70 (try 1/3)
[76946.211057] wlan0: RX AssocResp from 00:23:97:ea:81:70 (capab=0x411 status=0 aid=4)
[76946.221165] wlan0: associated
[76946.221191] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready