[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6e0000 (usable) [ 0.000000] BIOS-e820: 000000007f6e0000 - 000000007f6ea000 (ACPI data) [ 0.000000] BIOS-e820: 000000007f6ea000 - 000000007f700000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f700000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved) [ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x7f6e0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E3FFF uncachable [ 0.000000] E4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable [ 0.000000] 2 base 07F800000 mask FFF800000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007f6e0000 (usable) [ 0.000000] modified: 000000007f6e0000 - 000000007f6ea000 (ACPI data) [ 0.000000] modified: 000000007f6ea000 - 000000007f700000 (ACPI NVS) [ 0.000000] modified: 000000007f700000 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0006000 (reserved) [ 0.000000] modified: 00000000f0008000 - 00000000f000c000 (reserved) [ 0.000000] modified: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 3732c000 - 37fef509 [ 0.000000] Allocated new RAMDISK: 008de000 - 015a1509 [ 0.000000] Move RAMDISK from 000000003732c000 - 0000000037fef508 to 008de000 - 015a1508 [ 0.000000] ACPI: RSDP 000f7a10 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 7f6e59e4 00040 (v01 PTLTD RSDT 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 7f6e9e78 00084 (v02 INTEL ALVISO 06040000 LOHR 0000005F) [ 0.000000] ACPI: DSDT 7f6e6246 03C32 (v01 INTEL ALVISO 06040000 MSFT 0100000E) [ 0.000000] ACPI: FACS 7f6fafc0 00040 [ 0.000000] ACPI: APIC 7f6e9efc 00068 (v01 INTEL ALVISO 06040000 LOHR 0000005F) [ 0.000000] ACPI: BOOT 7f6e9fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: MCFG 7f6e9f9c 0003C (v01 INTEL ALVISO 06040000 LOHR 0000005F) [ 0.000000] ACPI: SSDT 7f6e5dfd 002B9 (v01 PmRef Cpu0Ist 00003000 INTL 20030224) [ 0.000000] ACPI: SSDT 7f6e5c1f 001DE (v01 PmRef Cpu0Cst 00003001 INTL 20030224) [ 0.000000] ACPI: SSDT 7f6e5a24 001FB (v01 PmRef CpuPm 00003000 INTL 20030224) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00008da000 - 00008dd1ac] BRK ==> [00008da000 - 00008dd1ac] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008de000 - 00015a1509] NEW RAMDISK ==> [00008de000 - 00015a1509] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0007f6e0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007f6e0 [ 0.000000] On node 0 totalpages: 521839 [ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c15a3200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2302 pages used for memmap [ 0.000000] HighMem zone: 292324 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s36024 r0 d21320 u2097152 [ 0.000000] pcpu-alloc: s36024 r0 d21320 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517761 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=9500613f-140a-4f10-8a25-40fd001622ec ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 10438720 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0007f6e0) [ 0.000000] Memory: 2037692k/2087808k available (4673k kernel code, 48616k reserved, 2122k data, 656k init, 1178504k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB) [ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB) [ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1695.953 MHz processor. [ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3391.90 BogoMIPS (lpj=6783812) [ 0.004035] Security Framework initialized [ 0.004070] AppArmor: AppArmor initialized [ 0.004081] Mount-cache hash table entries: 512 [ 0.004285] Initializing cgroup subsys ns [ 0.004291] Initializing cgroup subsys cpuacct [ 0.004296] Initializing cgroup subsys memory [ 0.004308] Initializing cgroup subsys devices [ 0.004312] Initializing cgroup subsys freezer [ 0.004315] Initializing cgroup subsys net_cls [ 0.004346] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004349] CPU: L2 cache: 2048K [ 0.004355] mce: CPU supports 5 MCE banks [ 0.004368] CPU0: Thermal monitoring enabled (TM2) [ 0.004383] Performance Events: p6 PMU driver. [ 0.004394] ... version: 0 [ 0.004397] ... bit width: 32 [ 0.004399] ... generic registers: 2 [ 0.004401] ... value mask: 00000000ffffffff [ 0.004404] ... max period: 000000007fffffff [ 0.004407] ... fixed-purpose events: 0 [ 0.004409] ... event mask: 0000000000000003 [ 0.004415] Checking 'hlt' instruction... OK. [ 0.021032] SMP alternatives: switching to UP code [ 0.029261] ACPI: Core revision 20090903 [ 0.039313] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.039324] ftrace: allocating 21771 entries in 43 pages [ 0.040088] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.040471] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.083344] CPU0: Intel(R) Pentium(R) M processor 1.70GHz stepping 08 [ 0.084001] Brought up 1 CPUs [ 0.084001] Total of 1 processors activated (3391.90 BogoMIPS). [ 0.084001] CPU0 attaching NULL sched-domain. [ 0.084001] devtmpfs: initialized [ 0.084001] regulator: core version 0.5 [ 0.084001] Time: 17:44:28 Date: 04/30/10 [ 0.084001] NET: Registered protocol family 16 [ 0.084001] EISA bus registered [ 0.084001] ACPI: bus type pci registered [ 0.084001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.084001] PCI: MCFG area at e0000000 reserved in E820 [ 0.084001] PCI: Using MMCONFIG for extended config space [ 0.084001] PCI: Using configuration type 1 for base access [ 0.084001] bio: create slab at 0 [ 0.084001] ACPI: EC: Look up EC in DSDT [ 0.108161] ACPI: Interpreter enabled [ 0.108169] ACPI: (supports S0 S3 S4 S5) [ 0.108193] ACPI: Using IOAPIC for interrupt routing [ 0.137080] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.137328] ACPI: No dock devices found. [ 0.140049] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.140145] pci 0000:00:02.0: reg 10 32bit mmio: [0xb0080000-0xb00fffff] [ 0.140151] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807] [ 0.140157] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xc0000000-0xcfffffff] [ 0.140163] pci 0000:00:02.0: reg 1c 32bit mmio: [0xb0000000-0xb003ffff] [ 0.140201] pci 0000:00:02.1: reg 10 32bit mmio: [0x000000-0x07ffff] [ 0.140321] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f] [ 0.140387] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f] [ 0.140455] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f] [ 0.140523] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f] [ 0.140593] pci 0000:00:1d.7: reg 10 32bit mmio: [0xb0040000-0xb00403ff] [ 0.140659] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.140666] pci 0000:00:1d.7: PME# disabled [ 0.140781] pci 0000:00:1e.2: reg 10 io port: [0x1c00-0x1cff] [ 0.140790] pci 0000:00:1e.2: reg 14 io port: [0x18c0-0x18ff] [ 0.140799] pci 0000:00:1e.2: reg 18 32bit mmio: [0xb0040800-0xb00409ff] [ 0.140808] pci 0000:00:1e.2: reg 1c 32bit mmio: [0xb0040400-0xb00404ff] [ 0.140849] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold [ 0.140854] pci 0000:00:1e.2: PME# disabled [ 0.140895] pci 0000:00:1e.3: reg 10 io port: [0x2400-0x24ff] [ 0.140904] pci 0000:00:1e.3: reg 14 io port: [0x2000-0x207f] [ 0.140956] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold [ 0.140961] pci 0000:00:1e.3: PME# disabled [ 0.141056] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.141065] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.141071] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.141076] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0680-06ff [ 0.141080] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 1200-120f [ 0.141112] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.141121] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.141130] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.141140] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.141149] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f] [ 0.141234] pci 0000:00:1f.3: reg 20 io port: [0x20a0-0x20bf] [ 0.141327] pci 0000:06:05.0: reg 10 32bit mmio: [0xb0100000-0xb0100fff] [ 0.141399] pci 0000:06:05.0: PME# supported from D0 D3hot D3cold [ 0.141406] pci 0000:06:05.0: PME# disabled [ 0.141457] pci 0000:06:07.0: reg 10 io port: [0x3000-0x30ff] [ 0.141468] pci 0000:06:07.0: reg 14 32bit mmio: [0xb0101000-0xb01010ff] [ 0.141531] pci 0000:06:07.0: supports D1 D2 [ 0.141534] pci 0000:06:07.0: PME# supported from D1 D2 D3hot D3cold [ 0.141540] pci 0000:06:07.0: PME# disabled [ 0.141592] pci 0000:06:09.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.141620] pci 0000:06:09.0: supports D1 D2 [ 0.141623] pci 0000:06:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.141629] pci 0000:06:09.0: PME# disabled [ 0.141679] pci 0000:00:1e.0: transparent bridge [ 0.141685] pci 0000:00:1e.0: bridge io port: [0x3000-0x3fff] [ 0.141691] pci 0000:00:1e.0: bridge 32bit mmio: [0xb0100000-0xb01fffff] [ 0.141731] pci_bus 0000:00: on NUMA node 0 [ 0.141737] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.141985] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.146717] ACPI: PCI Interrupt Link [LNKA] (IRQs *10 11) [ 0.146824] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11) [ 0.146928] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11) [ 0.147032] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11) [ 0.147135] ACPI: PCI Interrupt Link [LNKE] (IRQs *10 11) [ 0.147240] ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11) [ 0.147342] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. [ 0.147447] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11) [ 0.147554] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.147564] vgaarb: loaded [ 0.147703] SCSI subsystem initialized [ 0.147758] libata version 3.00 loaded. [ 0.147835] usbcore: registered new interface driver usbfs [ 0.147850] usbcore: registered new interface driver hub [ 0.147879] usbcore: registered new device driver usb [ 0.148063] ACPI: WMI: Mapper loaded [ 0.148066] PCI: Using ACPI for IRQ routing [ 0.148234] NetLabel: Initializing [ 0.148237] NetLabel: domain hash size = 128 [ 0.148239] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.148257] NetLabel: unlabeled traffic allowed by default [ 0.148422] hpet clockevent registered [ 0.148426] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.148434] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.148440] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.152011] Switching to clocksource tsc [ 0.154402] AppArmor: AppArmor Filesystem Enabled [ 0.154417] pnp: PnP ACPI init [ 0.154439] ACPI: bus type pnp registered [ 0.162155] pnp: PnP ACPI: found 8 devices [ 0.162157] ACPI: ACPI bus type pnp unregistered [ 0.162162] PnPBIOS: Disabled by ACPI PNP [ 0.162178] system 00:04: ioport range 0x800-0x80f has been reserved [ 0.162182] system 00:04: ioport range 0x1000-0x107f has been reserved [ 0.162186] system 00:04: ioport range 0x1180-0x11bf has been reserved [ 0.162189] system 00:04: ioport range 0x1200-0x1200 has been reserved [ 0.162193] system 00:04: ioport range 0x1204-0x1204 has been reserved [ 0.162197] system 00:04: iomem range 0xe0000000-0xefffffff has been reserved [ 0.162201] system 00:04: iomem range 0xf0000000-0xf0003fff has been reserved [ 0.162205] system 00:04: iomem range 0xf0004000-0xf0004fff has been reserved [ 0.162209] system 00:04: iomem range 0xf0005000-0xf0005fff has been reserved [ 0.162212] system 00:04: iomem range 0xf0008000-0xf000bfff has been reserved [ 0.162216] system 00:04: iomem range 0xfec18000-0xfec180ff has been reserved [ 0.162220] system 00:04: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.196955] pci 0000:06:09.0: CardBus bridge, secondary bus 0000:07 [ 0.196958] pci 0000:06:09.0: IO window: 0x003400-0x0034ff [ 0.196965] pci 0000:06:09.0: IO window: 0x003800-0x0038ff [ 0.196972] pci 0000:06:09.0: PREFETCH window: 0x80000000-0x83ffffff [ 0.196979] pci 0000:06:09.0: MEM window: 0x88000000-0x8bffffff [ 0.196985] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 [ 0.196990] pci 0000:00:1e.0: IO window: 0x3000-0x3fff [ 0.196997] pci 0000:00:1e.0: MEM window: 0xb0100000-0xb01fffff [ 0.197003] pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x83ffffff [ 0.197021] pci 0000:00:1e.0: setting latency timer to 64 [ 0.197038] alloc irq_desc for 22 on node -1 [ 0.197041] alloc kstat_irqs on node -1 [ 0.197047] pci 0000:06:09.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.197056] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.197060] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.197063] pci_bus 0000:06: resource 0 io: [0x3000-0x3fff] [ 0.197066] pci_bus 0000:06: resource 1 mem: [0xb0100000-0xb01fffff] [ 0.197070] pci_bus 0000:06: resource 2 pref mem [0x80000000-0x83ffffff] [ 0.197073] pci_bus 0000:06: resource 3 io: [0x00-0xffff] [ 0.197076] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff] [ 0.197079] pci_bus 0000:07: resource 0 io: [0x3400-0x34ff] [ 0.197083] pci_bus 0000:07: resource 1 io: [0x3800-0x38ff] [ 0.197086] pci_bus 0000:07: resource 2 pref mem [0x80000000-0x83ffffff] [ 0.197089] pci_bus 0000:07: resource 3 mem: [0x88000000-0x8bffffff] [ 0.197127] NET: Registered protocol family 2 [ 0.197236] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.197608] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.198748] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.199486] TCP: Hash tables configured (established 131072 bind 65536) [ 0.199490] TCP reno registered [ 0.199648] NET: Registered protocol family 1 [ 0.199679] pci 0000:00:02.0: Boot video device [ 0.200046] Simple Boot Flag at 0x37 set to 0x1 [ 0.200164] cpufreq-nforce2: No nForce2 chipset. [ 0.200203] Scanning for low memory corruption every 60 seconds [ 0.200349] audit: initializing netlink socket (disabled) [ 0.200365] type=2000 audit(1272649468.199:1): initialized [ 0.212621] Trying to unpack rootfs image as initramfs... [ 0.228330] highmem bounce pool size: 64 pages [ 0.228343] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.230229] VFS: Disk quotas dquot_6.5.2 [ 0.230306] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.231032] fuse init (API version 7.13) [ 0.231133] msgmni has been set to 1680 [ 0.236137] alg: No test for stdrng (krng) [ 0.236233] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.236237] io scheduler noop registered [ 0.236240] io scheduler anticipatory registered [ 0.236242] io scheduler deadline registered [ 0.236292] io scheduler cfq registered (default) [ 0.236424] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.236454] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.242825] ACPI: AC Adapter [ADP1] (on-line) [ 0.242924] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.249190] ACPI: Lid Switch [LID0] [ 0.249274] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.249282] ACPI: Sleep Button [SLPB] [ 0.249352] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.249355] ACPI: Power Button [PWRF] [ 0.249785] Marking TSC unstable due to TSC halts in idle [ 0.249848] processor LNXCPU:00: registered as cooling_device0 [ 0.254057] Switching to clocksource hpet [ 0.327394] ACPI: EC: GPE storm detected, transactions will use polling mode [ 0.327568] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.327582] ACPI: Thermal Zone [TZS0] (70 C) [ 0.396338] thermal LNXTHERM:02: registered as thermal_zone1 [ 0.396364] ACPI: Thermal Zone [TZS1] (54 C) [ 0.398219] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.398616] alloc irq_desc for 21 on node -1 [ 0.398619] alloc kstat_irqs on node -1 [ 0.398630] serial 0000:00:1e.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.398639] serial 0000:00:1e.3: PCI INT B disabled [ 0.399803] brd: module loaded [ 0.404854] loop: module loaded [ 0.404975] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.405129] ata_piix 0000:00:1f.1: version 2.13 [ 0.405148] alloc irq_desc for 16 on node -1 [ 0.405151] alloc kstat_irqs on node -1 [ 0.405160] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.405215] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.405333] isapnp: Scanning for PnP cards... [ 0.410866] scsi0 : ata_piix [ 0.410974] scsi1 : ata_piix [ 0.411737] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 [ 0.411741] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 [ 0.412196] Fixed MDIO Bus: probed [ 0.412243] PPP generic driver version 2.4.2 [ 0.412304] tun: Universal TUN/TAP device driver, 1.6 [ 0.412307] tun: (C) 1999-2004 Max Krasnyansky [ 0.412409] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.412435] alloc irq_desc for 23 on node -1 [ 0.412437] alloc kstat_irqs on node -1 [ 0.412444] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.412467] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.412471] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.412518] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.412557] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.416460] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.420569] ata2: port disabled. ignoring. [ 0.464288] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xb0040000 [ 0.484046] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.484227] usb usb1: configuration #1 chosen from 1 choice [ 0.484266] hub 1-0:1.0: USB hub found [ 0.484280] hub 1-0:1.0: 8 ports detected [ 0.484375] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.484397] uhci_hcd: USB Universal Host Controller Interface driver [ 0.484470] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.484482] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.484487] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.484544] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.484579] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820 [ 0.484687] usb usb2: configuration #1 chosen from 1 choice [ 0.484717] hub 2-0:1.0: USB hub found [ 0.484726] hub 2-0:1.0: 2 ports detected [ 0.484776] alloc irq_desc for 17 on node -1 [ 0.484779] alloc kstat_irqs on node -1 [ 0.484789] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.484797] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.484801] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.484837] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.484880] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840 [ 0.484987] usb usb3: configuration #1 chosen from 1 choice [ 0.485017] hub 3-0:1.0: USB hub found [ 0.485025] hub 3-0:1.0: 2 ports detected [ 0.485075] alloc irq_desc for 18 on node -1 [ 0.485077] alloc kstat_irqs on node -1 [ 0.485082] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.485089] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.485093] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.485131] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.485167] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 [ 0.485277] usb usb4: configuration #1 chosen from 1 choice [ 0.485307] hub 4-0:1.0: USB hub found [ 0.485316] hub 4-0:1.0: 2 ports detected [ 0.485365] alloc irq_desc for 19 on node -1 [ 0.485367] alloc kstat_irqs on node -1 [ 0.485372] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.485379] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.485383] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.485417] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.485453] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880 [ 0.485562] usb usb5: configuration #1 chosen from 1 choice [ 0.485591] hub 5-0:1.0: USB hub found [ 0.485600] hub 5-0:1.0: 2 ports detected [ 0.485717] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.486051] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.486134] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.486145] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.486190] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.486216] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.486241] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.486386] mice: PS/2 mouse device common for all mice [ 0.486542] rtc_cmos 00:05: RTC can wake from S4 [ 0.486597] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.486632] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.486763] device-mapper: uevent: version 1.0.3 [ 0.489043] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.490038] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.492159] device-mapper: multipath: version 1.1.0 loaded [ 0.492163] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.492340] EISA: Probing bus 0 at eisa.0 [ 0.492356] Cannot allocate resource for EISA slot 1 [ 0.492360] Cannot allocate resource for EISA slot 2 [ 0.492363] Cannot allocate resource for EISA slot 3 [ 0.492384] EISA: Detected 0 cards. [ 0.496361] cpuidle: using governor ladder [ 0.496433] cpuidle: using governor menu [ 0.496960] TCP cubic registered [ 0.497152] NET: Registered protocol family 10 [ 0.497683] lo: Disabled Privacy Extensions [ 0.498037] NET: Registered protocol family 17 [ 0.498350] Using IPI No-Shortcut mode [ 0.498470] PM: Resume from disk failed. [ 0.498485] registered taskstats version 1 [ 0.498772] Magic number: 6:729:745 [ 0.498886] rtc_cmos 00:05: setting system clock to 2010-04-30 17:44:29 UTC (1272649469) [ 0.498890] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.498893] EDD information not available. [ 0.652070] ata1.00: ATA-8: WDC WD2500BEVE-00WZT0, 01.01A01, max UDMA/100 [ 0.652076] ata1.00: 488397168 sectors, multi 16: LBA48 [ 0.652128] ata1.01: ATAPI: HL-DT-ST DVD-RW GWA-4082N, CP03, max UDMA/33 [ 0.668858] ata1.00: configured for UDMA/100 [ 0.684514] ata1.01: configured for UDMA/33 [ 0.938828] Freeing initrd memory: 13069k freed [ 1.039912] isapnp: No Plug & Play device found [ 1.040201] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVE-0 01.0 PQ: 0 ANSI: 5 [ 1.040455] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.044505] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.044567] sd 0:0:0:0: [sda] Write Protect is off [ 1.044570] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.044599] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.044722] scsi 0:0:1:0: CD-ROM HL-DT-ST DVD-RW GWA-4082N CP03 PQ: 0 ANSI: 5 [ 1.048301] sda: [ 1.052039] usb 5-2: new low speed USB device using uhci_hcd and address 2 [ 1.097115] sda1 sda2 < sda5 > sda3 [ 1.129819] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 1.129823] Uniform CD-ROM driver Revision: 3.20 [ 1.129921] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 1.129988] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 1.130123] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.130144] Freeing unused kernel memory: 656k freed [ 1.130687] Write protecting the kernel text: 4676k [ 1.130729] Write protecting the kernel read-only data: 1840k [ 1.150269] udev: starting version 151 [ 1.228623] usb 5-2: configuration #1 chosen from 1 choice [ 1.358282] Linux agpgart interface v0.103 [ 1.376785] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 1.376815] 8139cp 0000:06:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 1.377791] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 1.377906] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.383569] agpgart-intel 0000:00:00.0: Intel 915GM Chipset [ 1.384350] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 1.420185] 8139too Fast Ethernet driver 0.9.28 [ 1.420240] alloc irq_desc for 20 on node -1 [ 1.420242] alloc kstat_irqs on node -1 [ 1.420251] 8139too 0000:06:07.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.421621] eth0: RealTek RTL8139 at 0x3000, 00:16:d3:40:ae:ed, IRQ 20 [ 1.421750] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 [ 1.428126] [drm] Initialized drm 1.1.0 20060810 [ 1.435538] usbcore: registered new interface driver hiddev [ 1.462945] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input6 [ 1.463081] generic-usb 0003:046D:C045.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.3-2/input0 [ 1.463114] usbcore: registered new interface driver usbhid [ 1.463117] usbhid: v2.6:USB HID core driver [ 1.465020] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.465028] i915 0000:00:02.0: setting latency timer to 64 [ 1.471422] [drm] set up 7M of stolen space [ 1.575658] ACPI: Battery Slot [BAT0] (battery present) [ 1.582383] [drm] initialized overlay support [ 2.300390] fb0: inteldrmfb frame buffer device [ 2.300395] registered panic notifier [ 2.300405] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.303666] vga16fb: initializing [ 2.303670] vga16fb: mapped to 0xc00a0000 [ 2.303674] vga16fb: not registering due to another framebuffer present [ 2.413837] Console: switching to colour frame buffer device 160x50 [ 3.332908] xor: automatically using best checksumming function: pIII_sse [ 3.352009] pIII_sse : 4403.000 MB/sec [ 3.352012] xor: using function: pIII_sse (4403.000 MB/sec) [ 3.361608] device-mapper: dm-raid45: initialized v0.2594b [ 3.482809] EXT3-fs: INFO: recovery required on readonly filesystem. [ 3.482814] EXT3-fs: write access will be enabled during recovery. [ 4.146325] kjournald starting. Commit interval 5 seconds [ 4.146346] EXT3-fs: sda1: orphan cleanup on readonly fs [ 4.146353] ext3_orphan_cleanup: deleting unreferenced inode 49211 [ 4.173478] ext3_orphan_cleanup: deleting unreferenced inode 2826282 [ 4.183176] ext3_orphan_cleanup: deleting unreferenced inode 73907 [ 4.198846] ext3_orphan_cleanup: deleting unreferenced inode 73913 [ 4.210371] ext3_orphan_cleanup: deleting unreferenced inode 73914 [ 4.210381] ext3_orphan_cleanup: deleting unreferenced inode 73916 [ 4.210390] ext3_orphan_cleanup: deleting unreferenced inode 73918 [ 4.210400] ext3_orphan_cleanup: deleting unreferenced inode 73921 [ 4.216966] ext3_orphan_cleanup: deleting unreferenced inode 73923 [ 4.216976] ext3_orphan_cleanup: deleting unreferenced inode 49155 [ 4.221362] EXT3-fs: sda1: 10 orphan inodes deleted [ 4.221364] EXT3-fs: recovery complete. [ 4.249264] EXT3-fs: mounted filesystem with ordered data mode. [ 20.738132] Adding 6016300k swap on /dev/sda5. Priority:-1 extents:1 across:6016300k [ 20.825506] udev: starting version 151 [ 21.229892] lp: driver loaded but no devices found [ 21.275187] acer-wmi: Acer Laptop ACPI-WMI Extras [ 21.281850] Registered led device: acer-wmi::mail [ 21.921986] lib80211: common routines for IEEE802.11 drivers [ 21.921991] lib80211_crypt: registered algorithm 'NULL' [ 21.998772] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 21.998777] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 22.014329] type=1505 audit(1272649491.013:2): operation="profile_load" pid=545 name="/sbin/dhclient3" [ 22.015039] type=1505 audit(1272649491.013:3): operation="profile_load" pid=545 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 22.015423] type=1505 audit(1272649491.013:4): operation="profile_load" pid=545 name="/usr/lib/connman/scripts/dhclient-script" [ 22.053072] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000 [ 22.083326] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 [ 22.274334] yenta_cardbus 0000:06:09.0: CardBus bridge found [1025:006a] [ 22.274364] yenta_cardbus 0000:06:09.0: Using CSCINT to route CSC interrupts to PCI [ 22.274367] yenta_cardbus 0000:06:09.0: Routing CardBus interrupts to PCI [ 22.274374] yenta_cardbus 0000:06:09.0: TI: mfunc 0x00001022, devctl 0x44 [ 22.288891] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 22.288895] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 22.297558] intel_rng: FWH not detected [ 22.504817] yenta_cardbus 0000:06:09.0: ISA IRQ mask 0x0cf8, PCI irq 22 [ 22.504824] yenta_cardbus 0000:06:09.0: Socket status: 30000006 [ 22.504829] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #06 to #0a [ 22.504841] yenta_cardbus 0000:06:09.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff [ 22.504846] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: clean. [ 22.505091] yenta_cardbus 0000:06:09.0: pcmcia: parent PCI bridge Memory window: 0xb0100000 - 0xb01fffff [ 22.505095] yenta_cardbus 0000:06:09.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff [ 22.505903] ipw2200 0000:06:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 22.509185] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 22.509251] ipw2200 0000:06:05.0: firmware: requesting ipw2200-bss.fw [ 22.754999] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) [ 22.975548] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 22.977283] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 22.978013] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 22.978616] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 22.979391] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 23.159872] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 23.159906] Intel ICH 0000:00:1e.2: setting latency timer to 64 [ 23.239376] EXT3 FS on sda1, internal journal [ 23.388046] EXT4-fs (sda3): mounted filesystem with ordered data mode [ 23.984037] intel8x0_measure_ac97_clock: measured 55433 usecs (2671 samples) [ 23.984043] intel8x0: clocking to 48000 [ 24.330058] type=1505 audit(1272649493.329:5): operation="profile_load" pid=786 name="/usr/share/gdm/guest-session/Xsession" [ 24.331763] type=1505 audit(1272649493.329:6): operation="profile_replace" pid=787 name="/sbin/dhclient3" [ 24.332597] type=1505 audit(1272649493.333:7): operation="profile_replace" pid=787 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 24.332988] type=1505 audit(1272649493.333:8): operation="profile_replace" pid=787 name="/usr/lib/connman/scripts/dhclient-script" [ 24.337593] type=1505 audit(1272649493.337:9): operation="profile_load" pid=788 name="/usr/bin/evince" [ 24.347456] type=1505 audit(1272649493.345:10): operation="profile_load" pid=788 name="/usr/bin/evince-previewer" [ 24.353162] type=1505 audit(1272649493.353:11): operation="profile_load" pid=788 name="/usr/bin/evince-thumbnailer" [ 24.879151] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 25.506046] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 25.506052] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance [ 25.506054] vboxdrv: counter framework which can generate NMIs is active. You have to prevent [ 25.506055] vboxdrv: the usage of hardware performance counters by [ 25.506057] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid [ 25.506062] vboxdrv: Found 1 processor cores. [ 25.507619] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 25.507622] vboxdrv: Successfully loaded version 3.1.6_OSE (interface 0x00100001). [ 34.956010] eth0: no IPv6 routers present [ 35.852010] eth1: no IPv6 routers present [ 59.541896] lib80211_crypt: registered algorithm 'TKIP' [ 88.330630] ppdev: user-space parallel port driver [ 190.651615] process `skype' is using obsolete setsockopt SO_BSDCOMPAT [ 288.876043] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 288.876067] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node f7014ee8), AE_TIME [ 289.018717] ACPI Exception: AE_TIME, Error reading AC Adapter state (20090903/ac-140) [ 298.916058] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 298.916081] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node f7014ee8), AE_TIME [ 299.036918] ACPI Exception: AE_TIME, Error reading AC Adapter state (20090903/ac-140) [ 299.840442] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 305.275078] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 316.160016] eth1: no IPv6 routers present [ 359.060068] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 359.060094] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node f7014ee8), AE_TIME [ 359.084202] ACPI Exception: AE_TIME, Error reading AC Adapter state (20090903/ac-140) [ 379.858381] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 379.858404] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node f7014ee8), AE_TIME [ 379.887196] ACPI Exception: AE_TIME, Error reading AC Adapter state (20090903/ac-140) [ 414.652076] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 414.652103] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node f7014ee8), AE_TIME [ 414.652170] ACPI Exception: AE_TIME, Error reading AC Adapter state (20090903/ac-140) [ 427.772376] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 427.772404] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node f7014ee8), AE_TIME [ 427.890918] ACPI Exception: AE_TIME, Error reading AC Adapter state (20090903/ac-140) [ 431.503008] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 431.503043] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node f7014ee8), AE_TIME [ 431.565418] ACPI Exception: AE_TIME, Error reading AC Adapter state (20090903/ac-140) [ 508.452053] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 508.452077] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node f7014ee8), AE_TIME [ 508.556066] ACPI Exception: AE_TIME, Error reading AC Adapter state (20090903/ac-140) [ 510.136026] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 510.136049] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node f7014ee8), AE_TIME [ 510.188726] ACPI Exception: AE_TIME, Error reading AC Adapter state (20090903/ac-140) [ 6110.914701] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 6110.914729] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node f7014ee8), AE_TIME [ 6110.968121] ACPI Exception: AE_TIME, Error reading AC Adapter state (20090903/ac-140) [ 7347.277891] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 7347.277915] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node f7014ee8), AE_TIME [ 7347.321642] ACPI Exception: AE_TIME, Error reading AC Adapter state (20090903/ac-140) [ 7348.911133] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 7348.911156] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node f7014ee8), AE_TIME [ 7348.911198] ACPI Exception: AE_TIME, Error reading AC Adapter state (20090903/ac-140) [ 7350.453777] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 7350.453800] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node f7014ee8), AE_TIME [ 7350.498893] ACPI Exception: AE_TIME, Error reading AC Adapter state (20090903/ac-140) [ 7352.246191] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 7352.246220] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node f7014ee8), AE_TIME [ 7352.354210] ACPI Exception: AE_TIME, Error reading AC Adapter state (20090903/ac-140) [ 7361.567517] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 7361.567542] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node f7014ee8), AE_TIME [ 7361.615914] ACPI Exception: AE_TIME, Error reading AC Adapter state (20090903/ac-140) [ 7363.440890] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 7363.440925] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node f7014ee8), AE_TIME [ 7363.503000] ACPI Exception: AE_TIME, Error reading AC Adapter state (20090903/ac-140) [ 7365.192575] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 7365.192602] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node f7014ee8), AE_TIME [ 7365.253712] ACPI Exception: AE_TIME, Error reading AC Adapter state (20090903/ac-140) [ 7371.609889] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 7371.609917] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node f7014ee8), AE_TIME [ 7371.670750] ACPI Exception: AE_TIME, Error reading AC Adapter state (20090903/ac-140) [ 7373.030117] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 7373.920538] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 7374.516522] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 7374.516550] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node f7014ee8), AE_TIME [ 7374.559057] ACPI Exception: AE_TIME, Error reading AC Adapter state (20090903/ac-140) [ 7384.168021] eth1: no IPv6 routers present [ 7384.652440] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 7384.652466] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node f7014ee8), AE_TIME [ 7384.751491] ACPI Exception: AE_TIME, Error reading AC Adapter state (20090903/ac-140) [ 7468.428076] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 7468.428107] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node f7014ee8), AE_TIME [ 7468.428198] ACPI Exception: AE_TIME, Error reading AC Adapter state (20090903/ac-140) [ 7734.285787] SysRq : SAK [ 7734.285815] SAK: killed process 1039 (Xorg): task_session(p)==tty->session [ 7734.285881] SAK: killed process 856 (console-kit-dae): fd#11 opened to the tty [ 7734.285990] SAK: killed process 865 (console-kit-dae): fd#11 opened to the tty [ 7734.285993] SAK: killed process 866 (console-kit-dae): fd#11 opened to the tty [ 7734.285996] SAK: killed process 867 (console-kit-dae): fd#11 opened to the tty [ 7734.285999] SAK: killed process 868 (console-kit-dae): fd#11 opened to the tty [ 7734.286002] SAK: killed process 869 (console-kit-dae): fd#11 opened to the tty [ 7734.286005] SAK: killed process 870 (console-kit-dae): fd#11 opened to the tty [ 7734.286008] SAK: killed process 871 (console-kit-dae): fd#11 opened to the tty [ 7734.286011] SAK: killed process 872 (console-kit-dae): fd#11 opened to the tty [ 7734.286014] SAK: killed process 873 (console-kit-dae): fd#11 opened to the tty [ 7734.286017] SAK: killed process 874 (console-kit-dae): fd#11 opened to the tty [ 7734.286020] SAK: killed process 875 (console-kit-dae): fd#11 opened to the tty [ 7734.286023] SAK: killed process 876 (console-kit-dae): fd#11 opened to the tty [ 7734.286026] SAK: killed process 877 (console-kit-dae): fd#11 opened to the tty [ 7734.286029] SAK: killed process 878 (console-kit-dae): fd#11 opened to the tty [ 7734.286032] SAK: killed process 879 (console-kit-dae): fd#11 opened to the tty [ 7734.286035] SAK: killed process 880 (console-kit-dae): fd#11 opened to the tty [ 7734.286038] SAK: killed process 881 (console-kit-dae): fd#11 opened to the tty [ 7734.286041] SAK: killed process 882 (console-kit-dae): fd#11 opened to the tty [ 7734.286043] SAK: killed process 883 (console-kit-dae): fd#11 opened to the tty [ 7734.286046] SAK: killed process 884 (console-kit-dae): fd#11 opened to the tty [ 7734.286049] SAK: killed process 885 (console-kit-dae): fd#11 opened to the tty [ 7734.286052] SAK: killed process 890 (console-kit-dae): fd#11 opened to the tty [ 7734.286055] SAK: killed process 891 (console-kit-dae): fd#11 opened to the tty [ 7734.286058] SAK: killed process 892 (console-kit-dae): fd#11 opened to the tty [ 7734.286061] SAK: killed process 893 (console-kit-dae): fd#11 opened to the tty [ 7734.286064] SAK: killed process 894 (console-kit-dae): fd#11 opened to the tty [ 7734.286067] SAK: killed process 895 (console-kit-dae): fd#11 opened to the tty [ 7734.286070] SAK: killed process 896 (console-kit-dae): fd#11 opened to the tty [ 7734.286073] SAK: killed process 897 (console-kit-dae): fd#11 opened to the tty [ 7734.286076] SAK: killed process 898 (console-kit-dae): fd#11 opened to the tty [ 7734.286079] SAK: killed process 899 (console-kit-dae): fd#11 opened to the tty [ 7734.286082] SAK: killed process 900 (console-kit-dae): fd#11 opened to the tty [ 7734.286085] SAK: killed process 901 (console-kit-dae): fd#11 opened to the tty [ 7734.286088] SAK: killed process 902 (console-kit-dae): fd#11 opened to the tty [ 7734.286091] SAK: killed process 903 (console-kit-dae): fd#11 opened to the tty [ 7734.286094] SAK: killed process 904 (console-kit-dae): fd#11 opened to the tty [ 7734.286097] SAK: killed process 907 (console-kit-dae): fd#11 opened to the tty [ 7734.286100] SAK: killed process 908 (console-kit-dae): fd#11 opened to the tty [ 7734.286103] SAK: killed process 909 (console-kit-dae): fd#11 opened to the tty [ 7734.286106] SAK: killed process 910 (console-kit-dae): fd#11 opened to the tty [ 7734.286108] SAK: killed process 911 (console-kit-dae): fd#11 opened to the tty [ 7734.286111] SAK: killed process 912 (console-kit-dae): fd#11 opened to the tty [ 7734.286114] SAK: killed process 913 (console-kit-dae): fd#11 opened to the tty [ 7734.286117] SAK: killed process 914 (console-kit-dae): fd#11 opened to the tty [ 7734.286121] SAK: killed process 915 (console-kit-dae): fd#11 opened to the tty [ 7734.286124] SAK: killed process 916 (console-kit-dae): fd#11 opened to the tty [ 7734.286127] SAK: killed process 917 (console-kit-dae): fd#11 opened to the tty [ 7734.286130] SAK: killed process 918 (console-kit-dae): fd#11 opened to the tty [ 7734.286132] SAK: killed process 919 (console-kit-dae): fd#11 opened to the tty [ 7734.286135] SAK: killed process 920 (console-kit-dae): fd#11 opened to the tty [ 7734.286138] SAK: killed process 921 (console-kit-dae): fd#11 opened to the tty [ 7734.286141] SAK: killed process 922 (console-kit-dae): fd#11 opened to the tty [ 7734.286144] SAK: killed process 923 (console-kit-dae): fd#11 opened to the tty [ 7734.286148] SAK: killed process 924 (console-kit-dae): fd#11 opened to the tty [ 7734.286151] SAK: killed process 925 (console-kit-dae): fd#11 opened to the tty [ 7734.286154] SAK: killed process 926 (console-kit-dae): fd#11 opened to the tty [ 7734.286157] SAK: killed process 927 (console-kit-dae): fd#11 opened to the tty [ 7734.286159] SAK: killed process 928 (console-kit-dae): fd#11 opened to the tty [ 7734.286162] SAK: killed process 929 (console-kit-dae): fd#11 opened to the tty [ 7734.286165] SAK: killed process 930 (console-kit-dae): fd#11 opened to the tty [ 7734.286168] SAK: killed process 931 (console-kit-dae): fd#11 opened to the tty [ 7734.286171] SAK: killed process 932 (console-kit-dae): fd#11 opened to the tty [ 7734.286174] SAK: killed process 1002 (console-kit-dae): fd#11 opened to the tty [ 7734.286195] SAK: killed process 1039 (Xorg): task_session(p)==tty->session [ 7790.260187] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold [ 7808.402933] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 7808.402961] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node f7014ee8), AE_TIME [ 7808.568091] ACPI Exception: AE_TIME, Error reading AC Adapter state (20090903/ac-140) [ 7852.642627] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 7852.642657] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node f7014ee8), AE_TIME [ 7852.642714] ACPI Exception: AE_TIME, Error reading AC Adapter state (20090903/ac-140) [ 7929.155571] __ratelimit: 15 callbacks suppressed [ 7929.155579] alltray[7607]: segfault at 0 ip 00c27637 sp bfe06ec8 error 4 in libc-2.11.1.so[bad000+153000] [ 7977.252093] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 7977.252128] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node f7014ee8), AE_TIME [ 7977.274349] ACPI Exception: AE_TIME, Error reading AC Adapter state (20090903/ac-140) [ 7998.656041] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 7998.656071] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node f7014ee8), AE_TIME [ 7999.016033] ACPI Exception: AE_TIME, Error reading AC Adapter state (20090903/ac-140) [ 8002.892059] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 8002.892085] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node f7014ee8), AE_TIME [ 8002.955866] ACPI Exception: AE_TIME, Error reading AC Adapter state (20090903/ac-140) [ 8015.201006] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 8015.201030] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node f7014ee8), AE_TIME [ 8015.259556] ACPI Exception: AE_TIME, Error reading AC Adapter state (20090903/ac-140) [ 8322.195894] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 8322.195923] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node f7014ee8), AE_TIME [ 8322.329883] ACPI Exception: AE_TIME, Error reading AC Adapter state (20090903/ac-140) [ 8326.728068] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 8326.728103] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node f7014ee8), AE_TIME [ 8326.789103] ACPI Exception: AE_TIME, Error reading AC Adapter state (20090903/ac-140) [ 8331.884322] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 8331.884363] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node f7014ee8), AE_TIME [ 8331.884455] ACPI Exception: AE_TIME, Error reading AC Adapter state (20090903/ac-140) [ 8475.508036] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 8475.508063] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node f7014ee8), AE_TIME [ 8475.832049] ACPI Exception: AE_TIME, Error reading AC Adapter state (20090903/ac-140) [ 8540.016283] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 8540.016298] sr 0:0:1:0: CDB: Test Unit Ready: 00 00 00 00 00 00 [ 8540.016335] ata1.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0 [ 8540.016340] res 71/24:20:20:20:20/00:00:00:00:00/b0 Emask 0x1 (device error) [ 8540.016351] ata1.01: status: { DRDY DF ERR } [ 8540.032286] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 8540.032296] sr 0:0:1:0: CDB: Test Unit Ready: 00 00 00 00 00 00 [ 8540.032331] ata1.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0 [ 8540.032335] res 71/24:20:20:20:20/00:00:00:00:00/b0 Emask 0x1 (device error) [ 8540.032346] ata1.01: status: { DRDY DF ERR } [ 8540.048885] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 8540.048896] sr 0:0:1:0: CDB: Test Unit Ready: 00 00 00 00 00 00 [ 8540.048931] ata1.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0 [ 8540.048935] res 71/24:20:20:20:20/00:00:00:00:00/b0 Emask 0x1 (device error) [ 8540.048946] ata1.01: status: { DRDY DF ERR } [ 8540.064260] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 8540.064269] sr 0:0:1:0: CDB: Test Unit Ready: 00 00 00 00 00 00 [ 8540.064303] ata1.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0 [ 8540.064308] res 71/24:20:20:20:20/00:00:00:00:00/b0 Emask 0x1 (device error) [ 8540.064319] ata1.01: status: { DRDY DF ERR } [ 8540.080299] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 8540.080309] sr 0:0:1:0: CDB: Test Unit Ready: 00 00 00 00 00 00 [ 8540.080343] ata1.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0 [ 8540.080348] res 71/24:20:20:20:20/00:00:00:00:00/b0 Emask 0x1 (device error) [ 8540.080359] ata1.01: status: { DRDY DF ERR } [ 8540.096265] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 8540.096275] sr 0:0:1:0: CDB: Test Unit Ready: 00 00 00 00 00 00 [ 8540.096309] ata1.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0 [ 8540.096314] res 71/24:20:20:20:20/00:00:00:00:00/b0 Emask 0x1 (device error) [ 8540.096324] ata1.01: status: { DRDY DF ERR } [ 8540.112317] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 8540.112329] sr 0:0:1:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00 [ 8540.112380] ata1.01: cmd a0/00:00:00:08:00/00:00:00:00:00/b0 tag 0 pio 16392 in [ 8540.112385] res 71/24:20:20:28:20/00:00:00:00:00/b0 Emask 0x1 (device error) [ 8540.112396] ata1.01: status: { DRDY DF ERR } [ 8540.112633] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00 [ 8540.112663] sr: Sense Key : Aborted Command [current] [descriptor] [ 8540.112677] sr: Add. Sense: No additional sense information [ 9059.024665] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 9059.024691] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node f7014ee8), AE_TIME [ 9059.113630] ACPI Exception: AE_TIME, Error reading AC Adapter state (20090903/ac-140)