[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.35-28-generic (buildd@rothera) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #50-Ubuntu SMP Fri Mar 18 19:00:26 UTC 2011 (Ubuntu 2.6.35-28.50-generic 2.6.35.11) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000002bf70000 (usable) [ 0.000000] BIOS-e820: 000000002bf70000 - 000000002bf7c000 (ACPI data) [ 0.000000] BIOS-e820: 000000002bf7c000 - 000000002bf80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000002bf80000 - 000000002c000000 (reserved) [ 0.000000] BIOS-e820: 000000003bf80000 - 000000003c000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits [ 0.000000] DMI 2.3 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x2bf70 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DBFFF uncachable [ 0.000000] DC000-DFFFF write-back [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 base 020000000 mask FF8000000 write-back [ 0.000000] 2 base 028000000 mask FFC000000 write-back [ 0.000000] 3 base 02BF80000 mask FFFF80000 uncachable [ 0.000000] 4 base 03BF80000 mask FFFF80000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d8000 - 00000000000e0000 (reserved) [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000002bf70000 (usable) [ 0.000000] modified: 000000002bf70000 - 000000002bf7c000 (ACPI data) [ 0.000000] modified: 000000002bf7c000 - 000000002bf80000 (ACPI NVS) [ 0.000000] modified: 000000002bf80000 - 000000002c000000 (reserved) [ 0.000000] modified: 000000003bf80000 - 000000003c000000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-000000002bf70000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 002bc00000 page 2M [ 0.000000] 002bc00000 - 002bf70000 page 4k [ 0.000000] kernel direct mapping tables up to 2bf70000 @ 15000-1a000 [ 0.000000] RAMDISK: 2058f000 - 20fd4000 [ 0.000000] ACPI: RSDP 000f6ab0 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 2bf752a9 0002C (v01 PTLTD RSDT 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 2bf7bf64 00074 (v01 ATI Salmon 06040000 ATI 000F4240) [ 0.000000] ACPI: DSDT 2bf752d5 06C8F (v01 ATI MS2_1535 06040000 MSFT 0100000E) [ 0.000000] ACPI: FACS 2bf7cfc0 00040 [ 0.000000] ACPI: BOOT 2bf7bfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 703MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 2bf70000 [ 0.000000] low ram: 0 - 2bf70000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0002bf70 [ 0.000000] HighMem empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0002bf70 [ 0.000000] On node 0 totalpages: 179967 [ 0.000000] free_area_init_node: node 0, pgdat c0801fc0, node_mem_map c1001200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1375 pages used for memmap [ 0.000000] Normal zone: 174609 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d8000 [ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 3c000000 (gap: 3c000000:c3f80000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] early_res array is doubled to 64 at [16000 - 167ff] [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36416 r0 d20928 u4194304 [ 0.000000] pcpu-alloc: s36416 r0 d20928 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 178560 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-28-generic root=UUID=bbeb04b6-573d-43f3-b2c6-54cc1ec96a67 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 3601280 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Subtract (40 early reservations) [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE [ 0.000000] #2 [0000100000 - 00009a4adc] TEXT DATA BSS [ 0.000000] #3 [002058f000 - 0020fd4000] RAMDISK [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved [ 0.000000] #5 [00009a5000 - 00009a8240] BRK [ 0.000000] #6 [0000010000 - 0000011000] TRAMPOLINE [ 0.000000] #7 [0000011000 - 0000015000] ACPI WAKEUP [ 0.000000] #8 [0000015000 - 0000016000] PGTABLE [ 0.000000] #9 [0001000000 - 0001001000] BOOTMEM [ 0.000000] #10 [0001001000 - 0001581000] BOOTMEM [ 0.000000] #11 [0001581000 - 0001581004] BOOTMEM [ 0.000000] #12 [0001581040 - 0001581100] BOOTMEM [ 0.000000] #13 [0001581100 - 0001581144] BOOTMEM [ 0.000000] #14 [0001581180 - 0001584180] BOOTMEM [ 0.000000] #15 [0001584180 - 00015842b4] BOOTMEM [ 0.000000] #16 [00015842c0 - 0001584300] BOOTMEM [ 0.000000] #17 [0001584300 - 0001584340] BOOTMEM [ 0.000000] #18 [0001584340 - 0001584380] BOOTMEM [ 0.000000] #19 [0001584380 - 00015843c0] BOOTMEM [ 0.000000] #20 [00015843c0 - 0001584400] BOOTMEM [ 0.000000] #21 [0001584400 - 0001584440] BOOTMEM [ 0.000000] #22 [0001584440 - 0001584480] BOOTMEM [ 0.000000] #23 [0001584480 - 00015844c0] BOOTMEM [ 0.000000] #24 [00015844c0 - 0001584500] BOOTMEM [ 0.000000] #25 [0001584500 - 0001584540] BOOTMEM [ 0.000000] #26 [0001584540 - 0001584550] BOOTMEM [ 0.000000] #27 [0001584580 - 00015845ea] BOOTMEM [ 0.000000] #28 [0001584600 - 000158466a] BOOTMEM [ 0.000000] #29 [0001800000 - 000180e000] BOOTMEM [ 0.000000] #30 [0001586680 - 0001586684] BOOTMEM [ 0.000000] #31 [00015866c0 - 00015866c4] BOOTMEM [ 0.000000] #32 [0001586700 - 0001586704] BOOTMEM [ 0.000000] #33 [0001586740 - 0001586744] BOOTMEM [ 0.000000] #34 [0001586780 - 0001586830] BOOTMEM [ 0.000000] #35 [0001586840 - 00015868e8] BOOTMEM [ 0.000000] #36 [0001586900 - 000158a900] BOOTMEM [ 0.000000] #37 [000158a900 - 000160a900] BOOTMEM [ 0.000000] #38 [000160a900 - 000164a900] BOOTMEM [ 0.000000] #39 [000180e000 - 0001b7d380] BOOTMEM [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 690444k/720320k available (4936k kernel code, 29424k reserved, 2337k data, 688k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xec770000 - 0xff7fe000 ( 304 MB) [ 0.000000] lowmem : 0xc0000000 - 0xebf70000 ( 703 MB) [ 0.000000] .init : 0xc081b000 - 0xc08c7000 ( 688 kB) [ 0.000000] .data : 0xc05d20ae - 0xc081a7a8 (2337 kB) [ 0.000000] .text : 0xc0100000 - 0xc05d20ae (4936 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2791.368 MHz processor. [ 0.004024] Calibrating delay loop (skipped), value calculated using timer frequency.. 5582.73 BogoMIPS (lpj=11165472) [ 0.004039] pid_max: default: 32768 minimum: 301 [ 0.004118] Security Framework initialized [ 0.004215] AppArmor: AppArmor initialized [ 0.004221] Yama: becoming mindful. [ 0.004433] Mount-cache hash table entries: 512 [ 0.005024] Initializing cgroup subsys ns [ 0.005051] Initializing cgroup subsys cpuacct [ 0.005063] Initializing cgroup subsys memory [ 0.005099] Initializing cgroup subsys devices [ 0.005108] Initializing cgroup subsys freezer [ 0.005119] Initializing cgroup subsys net_cls [ 0.005259] CPU0: Hyper-Threading is disabled [ 0.005280] mce: CPU supports 4 MCE banks [ 0.005353] Performance Events: Netburst events, [ 0.005370] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.005375] no hardware sampling interrupt available. [ 0.005381] Netburst P4/Xeon PMU driver. [ 0.008048] ... version: 0 [ 0.008054] ... bit width: 40 [ 0.008059] ... generic registers: 18 [ 0.008067] ... value mask: 000000ffffffffff [ 0.008072] ... max period: 0000007fffffffff [ 0.008077] ... fixed-purpose events: 0 [ 0.008082] ... event mask: 000000000003ffff [ 0.011101] SMP alternatives: switching to UP code [ 0.036674] Freeing SMP alternatives: 24k freed [ 0.036763] ACPI: Core revision 20100428 [ 0.070295] ACPI: setting ELCR to 0200 (from 0420) [ 0.072048] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.072061] ftrace: allocating 21762 entries in 43 pages [ 0.076259] weird, boot CPU (#0) not listed by the BIOS. [ 0.076265] SMP motherboard not detected. [ 0.076270] Local APIC not detected. Using dummy APIC emulation. [ 0.076272] SMP disabled [ 0.080520] Brought up 1 CPUs [ 0.080532] Total of 1 processors activated (5582.73 BogoMIPS). [ 0.081488] devtmpfs: initialized [ 0.084230] regulator: core version 0.5 [ 0.084288] Time: 15:27:27 Date: 04/26/11 [ 0.084410] NET: Registered protocol family 16 [ 0.084755] EISA bus registered [ 0.084806] ACPI: bus type pci registered [ 0.144786] PCI: PCI BIOS revision 2.10 entry at 0xfd89b, last bus=2 [ 0.144795] PCI: Using configuration type 1 for base access [ 0.147114] bio: create slab at 0 [ 0.149434] ACPI: EC: Look up EC in DSDT [ 0.160344] ACPI: Interpreter enabled [ 0.160344] ACPI: (supports S0 S3 S4 S5) [ 0.160344] ACPI: Using PIC for interrupt routing [ 0.177115] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 0.177495] ACPI: No dock devices found. [ 0.177508] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.179017] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.181907] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.181914] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored) [ 0.181917] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) [ 0.181921] pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000e3fff] (ignored) [ 0.181925] pci_root PNP0A03:00: host bridge window [mem 0x2c000000-0xfff7ffff] (ignored) [ 0.181928] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d7fff] (ignored) [ 0.181931] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.181934] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.181971] pci 0000:00:00.0: reg 10: [mem 0xd4000000-0xd7ffffff pref] [ 0.181977] pci 0000:00:00.0: reg 14: [mem 0xd0005000-0xd0005fff pref] [ 0.182078] pci 0000:00:06.0: reg 10: [io 0x1000-0x10ff] [ 0.182085] pci 0000:00:06.0: reg 14: [mem 0xd0000000-0xd0000fff] [ 0.182122] pci 0000:00:06.0: supports D1 D2 [ 0.182126] pci 0000:00:06.0: PME# supported from D2 D3hot D3cold [ 0.182131] pci 0000:00:06.0: PME# disabled [ 0.182245] pci 0000:00:08.0: reg 10: [mem 0xd0001000-0xd0001fff] [ 0.182253] pci 0000:00:08.0: reg 14: [io 0x1400-0x14ff] [ 0.182291] pci 0000:00:08.0: PME# supported from D3hot D3cold [ 0.182295] pci 0000:00:08.0: PME# disabled [ 0.182325] pci 0000:00:0a.0: reg 10: [mem 0xd0002000-0xd0002fff] [ 0.182345] pci 0000:00:0a.0: supports D1 D2 [ 0.182348] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.182352] pci 0000:00:0a.0: PME# disabled [ 0.182395] pci 0000:00:0b.0: reg 20: [io 0x2000-0x201f] [ 0.182461] pci 0000:00:0b.1: reg 20: [io 0x2020-0x203f] [ 0.182513] pci 0000:00:0b.2: reg 10: [mem 0xd0003000-0xd00030ff] [ 0.182553] pci 0000:00:0b.2: PME# supported from D0 D3hot [ 0.182557] pci 0000:00:0b.2: PME# disabled [ 0.182607] pci 0000:00:10.0: reg 20: [io 0x2040-0x204f] [ 0.182690] pci 0000:00:11.0: quirk: [io 0x8000-0x803f] claimed by ali7101 ACPI [ 0.182696] pci 0000:00:11.0: quirk: [io 0x8040-0x805f] claimed by ali7101 SMB [ 0.182727] pci 0000:00:12.0: reg 10: [io 0x2400-0x24ff] [ 0.182734] pci 0000:00:12.0: reg 14: [mem 0xd0004000-0xd0004fff] [ 0.182756] pci 0000:00:12.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.182776] pci 0000:00:12.0: supports D1 D2 [ 0.182779] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.182783] pci 0000:00:12.0: PME# disabled [ 0.182863] pci 0000:01:05.0: reg 10: [mem 0xd8000000-0xdfffffff pref] [ 0.182870] pci 0000:01:05.0: reg 14: [io 0x9000-0x90ff] [ 0.182876] pci 0000:01:05.0: reg 18: [mem 0xd0300000-0xd030ffff] [ 0.182893] pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.182918] pci 0000:01:05.0: supports D1 D2 [ 0.182953] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.182960] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff] [ 0.182965] pci 0000:00:01.0: bridge window [mem 0xd0300000-0xd03fffff] [ 0.182971] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff pref] [ 0.183015] pci_bus 0000:00: on NUMA node 0 [ 0.183037] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.183178] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [ 0.186691] ACPI: PCI Interrupt Link [LNK0] (IRQs 7 10) *0, disabled. [ 0.187010] ACPI: PCI Interrupt Link [LNK1] (IRQs 7 *10) [ 0.187321] ACPI: PCI Interrupt Link [LNK2] (IRQs 7 *10) [ 0.187635] ACPI: PCI Interrupt Link [LNK3] (IRQs 7 *10) [ 0.187942] ACPI: PCI Interrupt Link [LNK4] (IRQs 7 10) *0, disabled. [ 0.188357] ACPI: PCI Interrupt Link [LNK5] (IRQs 7 11) *0, disabled. [ 0.188668] ACPI: PCI Interrupt Link [LNK6] (IRQs 7 10) *0, disabled. [ 0.188979] ACPI: PCI Interrupt Link [LNK7] (IRQs *5) [ 0.189314] ACPI: PCI Interrupt Link [LNK8] (IRQs 7 10) *0, disabled. [ 0.189444] HEST: Table is not found! [ 0.189705] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.189713] vgaarb: loaded [ 0.190177] SCSI subsystem initialized [ 0.190438] libata version 3.00 loaded. [ 0.190636] usbcore: registered new interface driver usbfs [ 0.190675] usbcore: registered new interface driver hub [ 0.190844] usbcore: registered new device driver usb [ 0.191423] ACPI: WMI: Mapper loaded [ 0.191431] PCI: Using ACPI for IRQ routing [ 0.191441] PCI: pci_cache_line_size set to 64 bytes [ 0.191535] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.191540] reserve RAM buffer: 000000002bf70000 - 000000002bffffff [ 0.191839] NetLabel: Initializing [ 0.191847] NetLabel: domain hash size = 128 [ 0.191849] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.191876] NetLabel: unlabeled traffic allowed by default [ 0.192126] Switching to clocksource tsc [ 0.213544] AppArmor: AppArmor Filesystem Enabled [ 0.213596] pnp: PnP ACPI init [ 0.213648] ACPI: bus type pnp registered [ 0.216210] ERROR: Unable to locate IOAPIC for GSI 8 [ 0.216366] ERROR: Unable to locate IOAPIC for GSI 13 [ 0.216647] ERROR: Unable to locate IOAPIC for GSI 1 [ 0.216810] ERROR: Unable to locate IOAPIC for GSI 12 [ 0.217198] pnp 00:07: disabling [io 0x8004-0x8005] because it overlaps 0000:00:11.0 BAR 13 [io 0x8000-0x803f] [ 0.218216] ERROR: Unable to locate IOAPIC for GSI 6 [ 0.219644] ERROR: Unable to locate IOAPIC for GSI 7 [ 0.221076] pnp: PnP ACPI: found 10 devices [ 0.221084] ACPI: ACPI bus type pnp unregistered [ 0.221094] PnPBIOS: Disabled by ACPI PNP [ 0.221144] system 00:07: [io 0x040b] has been reserved [ 0.221149] system 00:07: [io 0x0480-0x048f] has been reserved [ 0.221152] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.221155] system 00:07: [io 0x04d6] has been reserved [ 0.221161] system 00:07: [io 0x8000-0x807f] could not be reserved [ 0.221164] system 00:07: [io 0xff00-0xff01] has been reserved [ 0.221168] system 00:07: [io 0x80f0-0x80f3] has been reserved [ 0.221172] system 00:07: [io 0xfe00-0xfefe] has been reserved [ 0.221178] system 00:07: [mem 0xd0005000-0xd0005fff] has been reserved [ 0.262824] pci 0000:00:0a.0: BAR 15: assigned [mem 0x3c000000-0x3fffffff pref] [ 0.262832] pci 0000:00:0a.0: BAR 16: assigned [mem 0x40000000-0x43ffffff] [ 0.262837] pci 0000:00:12.0: BAR 6: assigned [mem 0x44000000-0x4400ffff pref] [ 0.262844] pci 0000:00:0a.0: BAR 13: assigned [io 0x1800-0x18ff] [ 0.262848] pci 0000:00:0a.0: BAR 14: assigned [io 0x1c00-0x1cff] [ 0.262855] pci 0000:01:05.0: BAR 6: assigned [mem 0xd0320000-0xd033ffff pref] [ 0.262860] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.262864] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff] [ 0.262870] pci 0000:00:01.0: bridge window [mem 0xd0300000-0xd03fffff] [ 0.262875] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff pref] [ 0.262882] pci 0000:00:0a.0: CardBus bridge to [bus 02-05] [ 0.262885] pci 0000:00:0a.0: bridge window [io 0x1800-0x18ff] [ 0.262890] pci 0000:00:0a.0: bridge window [io 0x1c00-0x1cff] [ 0.262895] pci 0000:00:0a.0: bridge window [mem 0x3c000000-0x3fffffff pref] [ 0.262900] pci 0000:00:0a.0: bridge window [mem 0x40000000-0x43ffffff] [ 0.262930] pci 0000:00:0a.0: enabling device (0000 -> 0003) [ 0.263394] ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 11 [ 0.263403] PCI: setting IRQ 11 as level-triggered [ 0.263411] pci 0000:00:0a.0: PCI INT A -> Link[LNK5] -> GSI 11 (level, low) -> IRQ 11 [ 0.263429] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.263433] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.263437] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff] [ 0.263440] pci_bus 0000:01: resource 1 [mem 0xd0300000-0xd03fffff] [ 0.263444] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff pref] [ 0.263448] pci_bus 0000:02: resource 0 [io 0x1800-0x18ff] [ 0.263452] pci_bus 0000:02: resource 1 [io 0x1c00-0x1cff] [ 0.263455] pci_bus 0000:02: resource 2 [mem 0x3c000000-0x3fffffff pref] [ 0.263458] pci_bus 0000:02: resource 3 [mem 0x40000000-0x43ffffff] [ 0.263557] NET: Registered protocol family 2 [ 0.263703] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.264393] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.266705] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.268016] TCP: Hash tables configured (established 131072 bind 65536) [ 0.268025] TCP reno registered [ 0.268048] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.268089] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.268383] NET: Registered protocol family 1 [ 0.268453] pci 0000:00:07.0: Activating ISA DMA hang workarounds [ 0.268523] pci 0000:01:05.0: Boot video device [ 0.268528] PCI: CLS 32 bytes, default 64 [ 0.268754] Simple Boot Flag at 0x37 set to 0x1 [ 0.269015] cpufreq-nforce2: No nForce2 chipset. [ 0.269087] Scanning for low memory corruption every 60 seconds [ 0.269458] audit: initializing netlink socket (disabled) [ 0.269493] type=2000 audit(1303831647.264:1): initialized [ 0.278371] Trying to unpack rootfs image as initramfs... [ 0.288483] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.299984] VFS: Disk quotas dquot_6.5.2 [ 0.300216] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.302454] fuse init (API version 7.14) [ 0.302914] msgmni has been set to 1348 [ 0.818542] Freeing initrd memory: 10516k freed [ 0.854617] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.854627] io scheduler noop registered [ 0.854630] io scheduler deadline registered [ 0.854718] io scheduler cfq registered (default) [ 0.855041] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.855101] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.856049] ACPI: AC Adapter [ACAD] (on-line) [ 0.856332] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.856348] ACPI: Power Button [PWRB] [ 0.856481] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.858918] ACPI: Lid Switch [LID] [ 0.859097] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.859112] ACPI: Power Button [PWRF] [ 0.859464] ACPI: acpi_idle registered with cpuidle [ 0.859722] Marking TSC unstable due to TSC halts in idle [ 0.864636] Switching to clocksource acpi_pm [ 1.030825] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.030892] ACPI: Thermal Zone [THRM] (53 C) [ 1.034248] ACPI: Battery Slot [BAT1] (battery present) [ 1.036531] ERST: Table is not found! [ 1.037027] isapnp: Scanning for PnP cards... [ 1.088854] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.091215] serial 0000:00:08.0: enabling device (0000 -> 0003) [ 1.093085] ACPI: PCI Interrupt Link [LNK6] enabled at IRQ 10 [ 1.093102] PCI: setting IRQ 10 as level-triggered [ 1.093122] serial 0000:00:08.0: PCI INT A -> Link[LNK6] -> GSI 10 (level, low) -> IRQ 10 [ 1.093164] serial 0000:00:08.0: PCI INT A disabled [ 1.111901] brd: module loaded [ 1.116927] loop: module loaded [ 1.118880] pata_acpi 0000:00:10.0: can't derive routing for PCI INT A [ 1.119148] pata_acpi 0000:00:10.0: can't derive routing for PCI INT A [ 1.121310] Fixed MDIO Bus: probed [ 1.121583] PPP generic driver version 2.4.2 [ 1.122119] tun: Universal TUN/TAP device driver, 1.6 [ 1.122132] tun: (C) 1999-2004 Max Krasnyansky [ 1.123092] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.123228] ehci_hcd 0000:00:0b.2: enabling device (0010 -> 0012) [ 1.123274] ehci_hcd 0000:00:0b.2: PCI INT C -> Link[LNK5] -> GSI 11 (level, low) -> IRQ 11 [ 1.123377] ehci_hcd 0000:00:0b.2: EHCI Host Controller [ 1.123848] ehci_hcd 0000:00:0b.2: new USB bus registered, assigned bus number 1 [ 1.124279] ehci_hcd 0000:00:0b.2: irq 11, io mem 0xd0003000 [ 1.168675] ehci_hcd 0000:00:0b.2: USB 2.0 started, EHCI 0.95 [ 1.169699] hub 1-0:1.0: USB hub found [ 1.169748] hub 1-0:1.0: 4 ports detected [ 1.170211] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.170334] uhci_hcd: USB Universal Host Controller Interface driver [ 1.171789] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10 [ 1.171817] uhci_hcd 0000:00:0b.0: PCI INT A -> Link[LNK2] -> GSI 10 (level, low) -> IRQ 10 [ 1.171876] uhci_hcd 0000:00:0b.0: UHCI Host Controller [ 1.217011] uhci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 [ 1.217149] uhci_hcd 0000:00:0b.0: irq 10, io base 0x00002000 [ 1.218165] hub 2-0:1.0: USB hub found [ 1.218210] hub 2-0:1.0: 2 ports detected [ 1.219698] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 10 [ 1.219728] uhci_hcd 0000:00:0b.1: PCI INT B -> Link[LNK3] -> GSI 10 (level, low) -> IRQ 10 [ 1.219789] uhci_hcd 0000:00:0b.1: UHCI Host Controller [ 1.220561] uhci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 3 [ 1.220689] uhci_hcd 0000:00:0b.1: irq 10, io base 0x00002020 [ 1.221706] hub 3-0:1.0: USB hub found [ 1.221751] hub 3-0:1.0: 2 ports detected [ 1.222447] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 1.228202] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.228264] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.229504] mice: PS/2 mouse device common for all mice [ 1.276357] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.276476] rtc0: alarms up to one month, y3k, 242 bytes nvram [ 1.277522] device-mapper: uevent: version 1.0.3 [ 1.323479] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 1.324491] device-mapper: multipath: version 1.1.1 loaded [ 1.324515] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.325892] EISA: Probing bus 0 at eisa.0 [ 1.325942] Cannot allocate resource for EISA slot 1 [ 1.325951] Cannot allocate resource for EISA slot 2 [ 1.326025] Cannot allocate resource for EISA slot 8 [ 1.326030] EISA: Detected 0 cards. [ 1.326856] cpuidle: using governor ladder [ 1.327081] cpuidle: using governor menu [ 1.328545] TCP cubic registered [ 1.329706] NET: Registered protocol family 10 [ 1.331751] lo: Disabled Privacy Extensions [ 1.332916] NET: Registered protocol family 17 [ 1.333408] Using IPI No-Shortcut mode [ 1.334556] PM: Resume from disk failed. [ 1.334656] registered taskstats version 1 [ 1.335345] Magic number: 7:458:488 [ 1.335834] rtc_cmos 00:02: setting system clock to 2011-04-26 15:27:29 UTC (1303831649) [ 1.335851] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.335855] EDD information not available. [ 1.469138] isapnp: No Plug & Play device found [ 1.469489] Freeing unused kernel memory: 688k freed [ 1.472673] Write protecting the kernel text: 4940k [ 1.472776] Write protecting the kernel read-only data: 1976k [ 1.511885] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.647605] udev[63]: starting version 163 [ 1.708419] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 2.357305] usbcore: registered new interface driver hiddev [ 2.391275] input: MLK RAPOO 3600 as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2:1.0/input/input4 [ 2.404213] generic-usb 0003:04FC:05DA.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [MLK RAPOO 3600] on usb-0000:00:0b.0-2/input0 [ 2.427607] usbcore: registered new interface driver usbhid [ 2.427632] usbhid: USB HID core driver [ 3.575687] Floppy drive(s): fd0 is 1.44M [ 3.599854] FDC 0 is a post-1991 82077 [ 3.700011] pata_ali 0000:00:10.0: can't derive routing for PCI INT A [ 3.717886] natsemi dp8381x driver, version 2.1, Sept 11, 2006 [ 3.717900] originally by Donald Becker [ 3.717904] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder [ 3.745514] scsi0 : pata_ali [ 3.760213] scsi1 : pata_ali [ 3.761553] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2040 irq 14 [ 3.761573] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2048 irq 15 [ 3.763199] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 10 [ 3.763235] natsemi 0000:00:12.0: PCI INT A -> Link[LNK1] -> GSI 10 (level, low) -> IRQ 10 [ 3.774404] natsemi eth0: NatSemi DP8381[56] at 0xd0004000 (0000:00:12.0), 00:0e:7f:7b:59:fd, IRQ 10, port TP. [ 3.945190] ata1.00: ATA-6: FUJITSU MHT2060AT PL, 0022, max UDMA/100 [ 3.945214] ata1.00: 117210240 sectors, multi 16: LBA [ 3.961164] ata1.00: configured for UDMA/100 [ 3.962141] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2060A 0022 PQ: 0 ANSI: 5 [ 3.963939] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.965732] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 3.969274] sd 0:0:0:0: [sda] Write Protect is off [ 3.969299] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.981683] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.999061] sda: sda1 sda2 < sda5 > [ 4.115159] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.128855] ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4241N, 0C29, max MWDMA2 [ 4.128951] ata2.00: WARNING: ATAPI DMA disabled for reliability issues. It can be enabled [ 4.128960] ata2.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node. [ 4.144813] ata2.00: configured for MWDMA2 [ 4.153525] scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4241N 0C29 PQ: 0 ANSI: 5 [ 4.169153] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 4.169179] Uniform CD-ROM driver Revision: 3.20 [ 4.170086] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 4.170777] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 4.858595] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 9.093896] Adding 2055164k swap on /dev/sda5. Priority:-1 extents:1 across:2055164k [ 11.245015] udev[286]: starting version 163 [ 11.329183] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 13.066647] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 13.714161] Linux agpgart interface v0.103 [ 13.871027] yenta_cardbus 0000:00:0a.0: CardBus bridge found [0000:0000] [ 13.871096] yenta_cardbus 0000:00:0a.0: Using CSCINT to route CSC interrupts to PCI [ 13.871101] yenta_cardbus 0000:00:0a.0: Routing CardBus interrupts to PCI [ 13.871117] yenta_cardbus 0000:00:0a.0: TI: mfunc 0x01111112, devctl 0x64 [ 14.136811] yenta_cardbus 0000:00:0a.0: ISA IRQ mask 0x00b8, PCI irq 11 [ 14.136831] yenta_cardbus 0000:00:0a.0: Socket status: 30000006 [ 14.310974] lp: driver loaded but no devices found [ 14.337940] agpgart-ati 0000:00:00.0: Ati IGP345M chipset [ 14.338326] reserve_ram_pages_type failed 0x20ac1000-0x20ac2000, track 0x10, req 0x10 [ 14.339558] reserve_ram_pages_type failed 0x20ac2000-0x20ac3000, track 0x10, req 0x10 [ 14.480394] reserve_ram_pages_type failed 0x20aca000-0x20acb000, track 0x10, req 0x10 [ 14.481571] reserve_ram_pages_type failed 0x20ac8000-0x20ac9000, track 0x10, req 0x10 [ 14.482858] reserve_ram_pages_type failed 0x2a149000-0x2a14a000, track 0x10, req 0x10 [ 14.641965] reserve_ram_pages_type failed 0x2ace1000-0x2ace2000, track 0x10, req 0x10 [ 14.643154] reserve_ram_pages_type failed 0x2ace3000-0x2ace4000, track 0x10, req 0x10 [ 14.764411] reserve_ram_pages_type failed 0x20ba0000-0x20ba1000, track 0x10, req 0x10 [ 14.765736] reserve_ram_pages_type failed 0x2acbe000-0x2acbf000, track 0x10, req 0x10 [ 14.861020] reserve_ram_pages_type failed 0x2a6b5000-0x2a6b6000, track 0x10, req 0x10 [ 14.862205] reserve_ram_pages_type failed 0x20b2f000-0x20b30000, track 0x10, req 0x10 [ 14.863365] reserve_ram_pages_type failed 0x20ac9000-0x20aca000, track 0x10, req 0x10 [ 15.069301] reserve_ram_pages_type failed 0x2acf5000-0x2acf6000, track 0x10, req 0x10 [ 15.070516] reserve_ram_pages_type failed 0x2ac36000-0x2ac37000, track 0x10, req 0x10 [ 15.071723] reserve_ram_pages_type failed 0x2ac37000-0x2ac38000, track 0x10, req 0x10 [ 15.300451] reserve_ram_pages_type failed 0x20b2d000-0x20b2e000, track 0x10, req 0x10 [ 15.301678] reserve_ram_pages_type failed 0x20b17000-0x20b18000, track 0x10, req 0x10 [ 15.547417] agpgart-ati 0000:00:00.0: AGP aperture is 64M @ 0xd4000000 [ 15.875560] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008/0x0 [ 16.102127] type=1400 audit(1303820864.261:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=373 comm="apparmor_parser" [ 16.103924] type=1400 audit(1303820864.261:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=373 comm="apparmor_parser" [ 16.186104] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input5 [ 16.186700] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 16.215707] type=1400 audit(1303820864.373:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=373 comm="apparmor_parser" [ 16.396783] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 16.578606] parport_pc 00:09: reported by Plug and Play ACPI [ 16.578773] parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 16.689135] lp0: using parport0 (interrupt-driven). [ 16.777907] [drm] Initialized drm 1.1.0 20060810 [ 18.842383] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x37f [ 18.865921] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x408-0x40f [ 18.904283] ppdev: user-space parallel port driver [ 18.921294] 0x480-0x48f 0x4d0-0x4d7 [ 18.922686] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 18.953816] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 18.979743] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xd8000-0xdffff 0xe4000-0xfffff [ 18.980891] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean. [ 18.981691] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean. [ 18.982500] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 20.047233] [drm] radeon defaulting to kernel modesetting. [ 20.047258] [drm] radeon kernel modesetting enabled. [ 20.047677] radeon 0000:01:05.0: power state changed by ACPI to D0 [ 20.047727] radeon 0000:01:05.0: power state changed by ACPI to D0 [ 20.049166] ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 10 [ 20.049202] radeon 0000:01:05.0: PCI INT A -> Link[LNK0] -> GSI 10 (level, low) -> IRQ 10 [ 20.141819] [drm] initializing kernel modesetting (RS200 0x1002:0x4337). [ 20.160565] [drm] register mmio base: 0xD0300000 [ 20.160581] [drm] register mmio size: 65536 [ 20.161397] agpgart-ati 0000:00:00.0: AGP 2.0 bridge [ 20.161485] agpgart-ati 0000:00:00.0: putting AGP V2 device into 4x mode [ 20.161614] radeon 0000:01:05.0: putting AGP V2 device into 4x mode [ 20.161630] radeon 0000:01:05.0: GTT: 64M 0xD4000000 - 0xD7FFFFFF [ 20.161656] radeon 0000:01:05.0: VRAM: 64M 0x2C000000 - 0x2FFFFFFF (64M used) [ 20.188665] [drm] radeon: irq initialized. [ 20.188978] [drm] Detected VRAM RAM=64M, BAR=128M [ 20.188997] [drm] RAM width 64bits DDR [ 20.202224] [TTM] Zone kernel: Available graphics memory: 350836 kiB. [ 20.202241] [TTM] Initializing pool allocator. [ 20.202400] [drm] radeon: 64M of VRAM memory ready [ 20.202409] [drm] radeon: 64M of GTT memory ready. [ 20.345412] [drm] Loading R100 Microcode [ 20.853485] [drm] radeon: ring at 0x00000000D4000000 [ 20.853540] [drm] ring test succeeded in 1 usecs [ 20.854875] [drm] radeon: ib pool ready. [ 20.855348] [drm] ib test succeeded in 0 usecs [ 20.889439] [drm] Panel ID String: QDI141X1LH03 [ 20.889464] [drm] Panel Size 1024x768 [ 20.898285] [drm] Default TV standard: NTSC [ 20.898306] [drm] 14.318180000 MHz TV ref clk [ 20.898334] [drm] Default TV standard: NTSC [ 20.898338] [drm] 14.318180000 MHz TV ref clk [ 20.900357] [drm] Radeon Display Connectors [ 20.900381] [drm] Connector 0: [ 20.900389] [drm] VGA [ 20.900400] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 20.900405] [drm] Encoders: [ 20.900412] [drm] CRT1: INTERNAL_DAC1 [ 20.900417] [drm] Connector 1: [ 20.900421] [drm] LVDS [ 20.900432] [drm] DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4 [ 20.900437] [drm] Encoders: [ 20.900441] [drm] LCD1: INTERNAL_LVDS [ 20.900448] [drm] Connector 2: [ 20.900452] [drm] S-video [ 20.900457] [drm] Encoders: [ 20.900464] [drm] TV1: INTERNAL_DAC2 [ 21.425885] [drm] fb mappable at 0xD8040000 [ 21.425902] [drm] vram apper at 0xD8000000 [ 21.425910] [drm] size 3145728 [ 21.425918] [drm] fb depth is 24 [ 21.425922] [drm] pitch is 4096 [ 21.578737] Console: switching to colour frame buffer device 128x48 [ 21.606049] fb0: radeondrmfb frame buffer device [ 21.606064] drm: registered panic notifier [ 21.621385] Slow work thread pool: Starting up [ 21.637634] Slow work thread pool: Ready [ 21.637714] [drm] Initialized radeon 2.5.0 20080528 for 0000:01:05.0 on minor 0 [ 21.780264] ALI 5451 0000:00:06.0: enabling device (0005 -> 0007) [ 21.781356] ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 5 [ 21.781376] PCI: setting IRQ 5 as level-triggered [ 21.781393] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNK7] -> GSI 5 (level, low) -> IRQ 5 [ 24.360306] AC'97 1 does not respond - RESET [ 24.376151] AC'97 1 access is not valid [0xffffffff], removing mixer. [ 24.376542] ali mixer 1 creating error. [ 33.478155] type=1400 audit(1303820881.637:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=862 comm="apparmor_parser" [ 33.485691] type=1400 audit(1303820881.645:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=862 comm="apparmor_parser" [ 34.238805] type=1400 audit(1303820882.397:7): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=845 comm="apparmor_parser" [ 34.415651] type=1400 audit(1303820882.573:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=891 comm="apparmor_parser" [ 34.439606] type=1400 audit(1303820882.597:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=891 comm="apparmor_parser" [ 34.455287] type=1400 audit(1303820882.613:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=891 comm="apparmor_parser" [ 35.773210] type=1400 audit(1303820883.933:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=896 comm="apparmor_parser" [ 35.935317] type=1400 audit(1303820884.093:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=896 comm="apparmor_parser" [ 36.000648] type=1400 audit(1303820884.161:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=896 comm="apparmor_parser" [ 36.148693] type=1400 audit(1303820884.309:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=932 comm="apparmor_parser" [ 38.559361] eth0: DSPCFG accepted after 0 usec. [ 38.559394] eth0: link up. [ 38.559475] eth0: Setting full-duplex based on negotiated link capability. [ 48.266892] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 49.320185] eth0: no IPv6 routers present [ 63.145881] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 662.520228] usb 1-3: new high speed USB device using ehci_hcd and address 3 [ 662.659757] hub 1-3:1.0: USB hub found [ 662.661589] hub 1-3:1.0: 4 ports detected [ 662.932567] usb 1-3.1: new high speed USB device using ehci_hcd and address 4 [ 663.112624] usb 1-3.2: new high speed USB device using ehci_hcd and address 5 [ 663.197662] Initializing USB Mass Storage driver... [ 663.198746] scsi2 : usb-storage 1-3.1:1.0 [ 663.203241] usbcore: registered new interface driver usb-storage [ 663.203261] USB Mass Storage support registered. [ 663.232314] hub 1-3.2:1.0: USB hub found [ 663.239829] hub 1-3.2:1.0: 7 ports detected [ 663.332532] usb 1-3.3: new high speed USB device using ehci_hcd and address 6 [ 663.432306] hub 1-3.3:1.0: USB hub found [ 663.432612] hub 1-3.3:1.0: 7 ports detected [ 663.512545] usb 1-3.4: new high speed USB device using ehci_hcd and address 7 [ 663.612511] hub 1-3.4:1.0: USB hub found [ 663.617699] hub 1-3.4:1.0: 4 ports detected [ 663.692615] usb 1-3.2.4: new full speed USB device using ehci_hcd and address 8 [ 663.882590] usb 1-3.2.6: new full speed USB device using ehci_hcd and address 9 [ 664.036552] input: C-Media USB Headphone Set as /devices/pci0000:00/0000:00:0b.2/usb1/1-3/1-3.2/1-3.2.6/1-3.2.6:1.3/input/input7 [ 664.039552] generic-usb 0003:0D8C:000C.0002: input,hidraw1: USB HID v1.00 Device [C-Media USB Headphone Set ] on usb-0000:00:0b.2-3.2.6/input3 [ 664.134228] usb 1-3.3.3: new high speed USB device using ehci_hcd and address 10 [ 664.292366] scsi 2:0:0:0: Direct-Access BUFFALO External HDD PQ: 0 ANSI: 2 CCS [ 664.295948] scsi3 : usb-storage 1-3.3.3:1.0 [ 664.360343] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 664.373743] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 664.388436] sd 2:0:0:0: [sdb] Write Protect is off [ 664.388461] sd 2:0:0:0: [sdb] Mode Sense: 34 00 00 00 [ 664.388473] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 664.392974] usb 1-3.3.4: new high speed USB device using ehci_hcd and address 11 [ 664.414085] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 664.414155] sdb: sdb1 [ 664.455852] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 664.455893] sd 2:0:0:0: [sdb] Attached SCSI disk [ 664.572397] scsi4 : usb-storage 1-3.3.4:1.0 [ 664.676637] usb 1-3.3.5: new full speed USB device using ehci_hcd and address 12 [ 664.856482] usbcore: registered new interface driver snd-usb-audio [ 664.873758] scsi5 : usb-storage 1-3.3.5:1.2 [ 664.992752] usb 1-3.3.6: new full speed USB device using ehci_hcd and address 13 [ 665.200606] usb 1-3.4.4: new high speed USB device using ehci_hcd and address 14 [ 665.387573] scsi6 : usb-storage 1-3.4.4:1.0 [ 665.639620] scsi 4:0:0:0: Direct-Access SEAGATE ST3250823A 3.03 PQ: 0 ANSI: 2 [ 665.939272] scsi 5:0:0:0: Direct-Access HP Photosmart 320 s 1.00 PQ: 0 ANSI: 2 [ 666.279567] usblp0: USB Bidirectional printer dev 12 if 0 alt 0 proto 2 vid 0x03F0 pid 0x1202 [ 666.296359] usbcore: registered new interface driver usblp [ 666.431947] scsi 6:0:0:0: Direct-Access WD 10EADS External 1.75 PQ: 0 ANSI: 4 [ 668.017732] usb 1-3.3.5: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 [ 686.120660] usb 1-3.3.3: reset high speed USB device using ehci_hcd and address 10 [ 696.284563] usb 1-3.3.3: reset high speed USB device using ehci_hcd and address 10 [ 712.448465] usb 1-3.3.3: reset high speed USB device using ehci_hcd and address 10 [ 712.616494] usb 1-3.3.3: reset high speed USB device using ehci_hcd and address 10 [ 722.780602] usb 1-3.3.3: reset high speed USB device using ehci_hcd and address 10 [ 722.873464] scsi 3:0:0:0: Device offlined - not ready after error recovery [ 722.881029] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 722.894454] sd 5:0:0:0: Attached scsi generic sg4 type 0 [ 722.897131] sd 6:0:0:0: Attached scsi generic sg5 type 0 [ 722.942813] sd 4:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 722.946867] sd 4:0:0:0: [sdc] Write Protect is off [ 722.946889] sd 4:0:0:0: [sdc] Mode Sense: 53 00 00 08 [ 722.946904] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 722.965008] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 722.965084] sdc: sdc1 sdc2 < [ 722.985798] sd 5:0:0:0: [sdd] Attached SCSI removable disk [ 722.990206] sd 6:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 722.996350] sd 6:0:0:0: [sde] Write Protect is off [ 722.996376] sd 6:0:0:0: [sde] Mode Sense: 23 00 00 00 [ 722.996389] sd 6:0:0:0: [sde] Assuming drive cache: write through [ 723.006342] sdc5 sdc6 sdc7 > [ 723.052310] sd 6:0:0:0: [sde] Assuming drive cache: write through [ 723.052386] sde: [ 723.097030] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 723.097067] sd 4:0:0:0: [sdc] Attached SCSI disk [ 723.553727] sde1 [ 723.564561] sd 6:0:0:0: [sde] Assuming drive cache: write through [ 723.564602] sd 6:0:0:0: [sde] Attached SCSI disk [ 729.539483] EXT3-fs: barriers not enabled [ 729.560718] kjournald starting. Commit interval 5 seconds [ 729.560940] EXT3-fs (sdc6): warning: checktime reached, running e2fsck is recommended [ 729.658112] EXT3-fs (sdc6): using internal journal [ 729.658157] EXT3-fs (sdc6): mounted filesystem with ordered data mode [ 730.491526] EXT3-fs: barriers not enabled [ 730.508392] kjournald starting. Commit interval 5 seconds [ 730.508724] EXT3-fs (sdc7): warning: checktime reached, running e2fsck is recommended [ 730.510290] EXT3-fs (sdc7): using internal journal [ 730.510332] EXT3-fs (sdc7): mounted filesystem with ordered data mode [30879.080242] usblp0: removed [30879.152390] usb 1-3.3.5: reset full speed USB device using ehci_hcd and address 12 [30879.256369] usblp0: USB Bidirectional printer dev 12 if 0 alt 0 proto 2 vid 0x03F0 pid 0x1202 [150186.109607] usb 1-3.3.3: USB disconnect, address 10 [184046.057244] usblp0: removed [184046.144472] usb 1-3.3.5: reset full speed USB device using ehci_hcd and address 12 [184046.248366] usblp0: USB Bidirectional printer dev 12 if 0 alt 0 proto 2 vid 0x03F0 pid 0x1202 [205077.453436] WARNING! power/level is deprecated; use power/control instead [205077.605880] usb 1-3.4.4: USB disconnect, address 14 [205096.665158] usb 1-3.1: USB disconnect, address 4 [205108.341042] usb 1-3.3.4: USB disconnect, address 11 [205121.581448] usb 1-3: USB disconnect, address 3 [205121.581472] usb 1-3.2: USB disconnect, address 5 [205121.581481] usb 1-3.2.4: USB disconnect, address 8 [205121.624634] usb 1-3.2.6: USB disconnect, address 9 [205121.929433] usb 1-3.3: USB disconnect, address 6 [205121.929458] usb 1-3.3.5: USB disconnect, address 12 [205121.930378] usblp0: removed [205122.146474] usb 1-3.3.6: USB disconnect, address 13 [205122.225534] usb 1-3.4: USB disconnect, address 7 [221462.961101] audit_printk_skb: 9 callbacks suppressed [221462.961117] type=1400 audit(1304042311.123:18): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=21623 comm="apparmor_parser" [221462.963419] type=1400 audit(1304042311.123:19): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=21623 comm="apparmor_parser" [221730.209644] type=1400 audit(1304042578.371:20): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=29827 comm="apparmor_parser" [221730.211964] type=1400 audit(1304042578.371:21): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=29827 comm="apparmor_parser" [224431.271415] type=1400 audit(1304045279.431:22): apparmor="STATUS" operation="profile_replace" name="/usr/share/gdm/guest-session/Xsession" pid=31337 comm="apparmor_parser" [224432.367365] type=1400 audit(1304045280.527:23): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=31338 comm="apparmor_parser" [224432.370826] type=1400 audit(1304045280.531:24): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=31338 comm="apparmor_parser" [224432.378056] type=1400 audit(1304045280.539:25): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=31338 comm="apparmor_parser" [224472.512482] type=1400 audit(1304045320.675:26): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince" pid=31339 comm="apparmor_parser" [224472.528322] type=1400 audit(1304045320.691:27): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer" pid=31339 comm="apparmor_parser" [224472.540274] type=1400 audit(1304045320.703:28): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-thumbnailer" pid=31339 comm="apparmor_parser" [224474.949395] type=1400 audit(1304045323.111:29): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=31341 comm="apparmor_parser" [224474.954562] type=1400 audit(1304045323.115:30): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=31341 comm="apparmor_parser" [224475.552433] type=1400 audit(1304045323.715:31): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld-akonadi" pid=31347 comm="apparmor_parser" [224476.185027] type=1400 audit(1304045324.347:32): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/tcpdump" pid=31348 comm="apparmor_parser" [238149.863157] type=1400 audit(1304058998.023:33): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld-akonadi" pid=6101 comm="apparmor_parser" [238149.868451] type=1400 audit(1304058998.031:34): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=6101 comm="apparmor_parser" [238322.097700] type=1400 audit(1304059170.259:35): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=6982 comm="apparmor_parser" [238322.099252] type=1400 audit(1304059170.259:36): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=6982 comm="apparmor_parser" [238322.103819] type=1400 audit(1304059170.263:37): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=6982 comm="apparmor_parser" [239760.674692] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [239760.769072] SGI XFS Quota Management subsystem [239760.913999] JFS: nTxBlock = 5481, nTxLock = 43854 [239761.125752] NTFS driver 2.1.29 [Flags: R/O MODULE]. [239761.426603] QNX4 filesystem 0.2.3 registered. [239761.900772] Btrfs loaded [239776.475564] type=1400 audit(1304060624.635:38): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/tcpdump" pid=18955 comm="apparmor_parser" [240808.560271] type=1400 audit(1304061656.723:39): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=21432 comm="apparmor_parser" [240808.567474] type=1400 audit(1304061656.727:40): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=21432 comm="apparmor_parser" [240809.475513] type=1400 audit(1304061657.635:41): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=21468 comm="apparmor_parser" [240809.482673] type=1400 audit(1304061657.643:42): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=21468 comm="apparmor_parser" [241757.512946] type=1400 audit(1304062605.675:43): apparmor="STATUS" operation="profile_replace" name="/usr/share/gdm/guest-session/Xsession" pid=25902 comm="apparmor_parser" [241759.436288] type=1400 audit(1304062607.595:44): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=25904 comm="apparmor_parser" [241759.438009] type=1400 audit(1304062607.599:45): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=25904 comm="apparmor_parser" [241759.439339] type=1400 audit(1304062607.599:46): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=25904 comm="apparmor_parser" [241807.839981] type=1400 audit(1304062655.999:47): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince" pid=25905 comm="apparmor_parser" [241807.861882] type=1400 audit(1304062656.023:48): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer" pid=25905 comm="apparmor_parser" [241807.876396] type=1400 audit(1304062656.039:49): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-thumbnailer" pid=25905 comm="apparmor_parser" [241810.989834] type=1400 audit(1304062659.151:50): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=25907 comm="apparmor_parser" [241810.997422] type=1400 audit(1304062659.159:51): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=25907 comm="apparmor_parser" [241812.356783] type=1400 audit(1304062660.519:52): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld-akonadi" pid=25908 comm="apparmor_parser" [241812.363256] type=1400 audit(1304062660.523:53): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=25908 comm="apparmor_parser" [241813.450448] type=1400 audit(1304062661.611:54): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/tcpdump" pid=25909 comm="apparmor_parser" [241814.879993] type=1400 audit(1304062663.039:55): apparmor="STATUS" operation="profile_replace" name="/usr/share/gdm/guest-session/Xsession" pid=25947 comm="apparmor_parser" [241816.647175] type=1400 audit(1304062664.807:56): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=25948 comm="apparmor_parser" [241816.650534] type=1400 audit(1304062664.811:57): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=25948 comm="apparmor_parser" [241816.651878] type=1400 audit(1304062664.811:58): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=25948 comm="apparmor_parser" [241862.267959] type=1400 audit(1304062710.427:59): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince" pid=25949 comm="apparmor_parser" [241862.291020] type=1400 audit(1304062710.451:60): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer" pid=25949 comm="apparmor_parser" [241862.303308] type=1400 audit(1304062710.463:61): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-thumbnailer" pid=25949 comm="apparmor_parser" [241865.373090] type=1400 audit(1304062713.535:62): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=25951 comm="apparmor_parser" [241865.383328] type=1400 audit(1304062713.543:63): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=25951 comm="apparmor_parser" [241866.685204] type=1400 audit(1304062714.847:64): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld-akonadi" pid=25952 comm="apparmor_parser" [241866.690817] type=1400 audit(1304062714.851:65): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=25952 comm="apparmor_parser" [241867.727016] type=1400 audit(1304062715.887:66): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/tcpdump" pid=25953 comm="apparmor_parser" [241868.418033] type=1400 audit(1304062716.579:67): apparmor="STATUS" operation="profile_remove" name="/sbin/dhclient3" pid=25978 comm="apparmor" [241897.545513] <30>udev[26032]: converting old udev database [241898.394252] <30>udev[26033]: starting version 167 [241922.488627] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0