[ 0.000000] microcode: microcode updated early to revision 0x25, date = 2018-04-02 [ 0.000000] Linux version 4.15.0-36-generic (buildd@lgw01-amd64-031) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 (Ubuntu 4.15.0-36.39-generic 4.15.18) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-36-generic root=UUID=fc44a9dc-e173-43fb-ac3a-fdeadb1066e0 ro quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009c67efff] usable [ 0.000000] BIOS-e820: [mem 0x000000009c67f000-0x000000009c87efff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000009c87f000-0x000000009ce7efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009ce7f000-0x000000009cf7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009cf7f000-0x000000009cffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable [ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000045f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by INSYDE Corp. [ 0.000000] efi: ACPI=0x9cffe000 ACPI 2.0=0x9cffe014 SMBIOS=0x9ce7ef98 [ 0.000000] secureboot: Secure boot could not be determined (mode 0) [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP ENVY 17 Notebook PC/1968, BIOS F.66 09/22/2015 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x45f600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7800000000 write-back [ 0.000000] 1 base 009D000000 mask 7FFF000000 uncachable [ 0.000000] 2 base 009E000000 mask 7FFE000000 uncachable [ 0.000000] 3 base 00A0000000 mask 7FE0000000 uncachable [ 0.000000] 4 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] total RAM covered: 31184M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 7 lose cover RAM: 0G [ 0.000000] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 7e000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x13273f000, 0x13273ffff] PGTABLE [ 0.000000] BRK [0x132740000, 0x132740fff] PGTABLE [ 0.000000] BRK [0x132741000, 0x132741fff] PGTABLE [ 0.000000] BRK [0x132742000, 0x132742fff] PGTABLE [ 0.000000] BRK [0x132743000, 0x132743fff] PGTABLE [ 0.000000] BRK [0x132744000, 0x132744fff] PGTABLE [ 0.000000] BRK [0x132745000, 0x132745fff] PGTABLE [ 0.000000] BRK [0x132746000, 0x132746fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x31609000-0x34afbfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000000009CFFE014 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x000000009CFFE210 0000BC (v01 HPQOEM SLIC-MPC 00000001 HP 01000013) [ 0.000000] ACPI: FACP 0x000000009CFF8000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000) [ 0.000000] ACPI: DSDT 0x000000009CFE1000 01316A (v01 HPQOEM 1968 00000000 ACPI 00040000) [ 0.000000] ACPI: FACS 0x000000009CF7A000 000040 [ 0.000000] ACPI: UEFI 0x000000009CFFD000 000236 (v01 HPQOEM 1968 00000001 HP 00040000) [ 0.000000] ACPI: FPDT 0x000000009CFFB000 000044 (v01 HPQOEM 1968 00000001 HP 00040000) [ 0.000000] ACPI: MSDM 0x000000009CFFA000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000) [ 0.000000] ACPI: ASF! 0x000000009CFF9000 0000A5 (v32 HPQOEM 1968 00000001 HP 00040000) [ 0.000000] ACPI: HPET 0x000000009CFF7000 000038 (v01 HPQOEM 1968 00000001 HP 00040000) [ 0.000000] ACPI: APIC 0x000000009CFF6000 00008C (v03 HPQOEM 1968 00000001 HP 00040000) [ 0.000000] ACPI: MCFG 0x000000009CFF5000 00003C (v01 HPQOEM 1968 00000001 HP 00040000) [ 0.000000] ACPI: SSDT 0x000000009CFDE000 002026 (v01 HPQOEM 1968 00001000 INTL 00040000) [ 0.000000] ACPI: BOOT 0x000000009CFDC000 000028 (v01 HPQOEM 1968 00000001 HP 00040000) [ 0.000000] ACPI: LPIT 0x000000009CFDB000 000094 (v01 HPQOEM 1968 00000001 HP 00040000) [ 0.000000] ACPI: ASPT 0x000000009CFD9000 000034 (v07 HPQOEM 1968 00000001 HP 00040000) [ 0.000000] ACPI: DBGP 0x000000009CFD8000 000034 (v01 HPQOEM 1968 00000001 HP 00040000) [ 0.000000] ACPI: SSDT 0x000000009CFD0000 000539 (v01 HPQOEM 1968 00003000 INTL 00040000) [ 0.000000] ACPI: SSDT 0x000000009CFCF000 000AD8 (v01 HPQOEM 1968 00003000 INTL 00040000) [ 0.000000] ACPI: SSDT 0x000000009CFCB000 003385 (v01 HPQOEM 1968 00003000 INTL 00040000) [ 0.000000] ACPI: SSDT 0x000000009CFC5000 003B0F (v01 HPQOEM 1968 00001000 INTL 00040000) [ 0.000000] ACPI: SSDT 0x000000009CFCA000 000379 (v01 HPQOEM 1968 00001000 INTL 00040000) [ 0.000000] ACPI: BGRT 0x000000009CFC9000 000038 (v01 HPQOEM 1968 00000001 HP 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000045f5fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x45f5d5000-0x45f5fffff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000045f5fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000006efff] [ 0.000000] node 0: [mem 0x0000000000070000-0x0000000000087fff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000009c67efff] [ 0.000000] node 0: [mem 0x000000009cfff000-0x000000009cffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000045f5fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000045f5fffff] [ 0.000000] On node 0 totalpages: 4176902 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 22 pages reserved [ 0.000000] DMA zone: 3974 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9946 pages used for memmap [ 0.000000] DMA32 zone: 636544 pages, LIFO batch:31 [ 0.000000] Normal zone: 55256 pages used for memmap [ 0.000000] Normal zone: 3536384 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 99 pages [ 0.000000] Reserving Intel graphics memory at 0x000000009da00000-0x000000009f9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9c67f000-0x9c87efff] [ 0.000000] PM: Registered nosave memory: [mem 0x9c87f000-0x9ce7efff] [ 0.000000] PM: Registered nosave memory: [mem 0x9ce7f000-0x9cf7efff] [ 0.000000] PM: Registered nosave memory: [mem 0x9cf7f000-0x9cffefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff] [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4111614 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-36-generic root=UUID=fc44a9dc-e173-43fb-ac3a-fdeadb1066e0 ro quiet splash vt.handoff=1 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16217876K/16707608K available (12300K kernel code, 2472K rwdata, 4248K rodata, 2408K init, 2416K bss, 489732K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 39168 entries in 154 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#1 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 2194.806 MHz processor [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.61 BogoMIPS (lpj=8779224) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.029161] Security Framework initialized [ 0.029163] Yama: becoming mindful. [ 0.029190] AppArmor: AppArmor initialized [ 0.032624] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.033923] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.033971] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.034012] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.034224] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.034225] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.034230] mce: CPU supports 9 MCE banks [ 0.034239] CPU0: Thermal monitoring enabled (TM1) [ 0.034254] process: using mwait in idle threads [ 0.034257] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.034258] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.034259] Spectre V2 : Mitigation: Full generic retpoline [ 0.034260] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.034260] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.034261] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.034262] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.040824] Freeing SMP alternatives memory: 36K [ 0.046211] TSC deadline timer enabled [ 0.046214] smpboot: CPU0: Intel(R) Core(TM) i7-4702MQ CPU @ 2.20GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.046279] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.046323] ... version: 3 [ 0.046323] ... bit width: 48 [ 0.046324] ... generic registers: 4 [ 0.046325] ... value mask: 0000ffffffffffff [ 0.046325] ... max period: 00007fffffffffff [ 0.046326] ... fixed-purpose events: 3 [ 0.046326] ... event mask: 000000070000000f [ 0.046358] Hierarchical SRCU implementation. [ 0.047661] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.047675] smp: Bringing up secondary CPUs ... [ 0.047745] x86: Booting SMP configuration: [ 0.047746] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.054151] smp: Brought up 1 node, 8 CPUs [ 0.054151] smpboot: Max logical packages: 1 [ 0.054151] smpboot: Total of 8 processors activated (35116.89 BogoMIPS) [ 0.056437] devtmpfs: initialized [ 0.056437] x86/mm: Memory block size: 128MB [ 0.057285] evm: security.selinux [ 0.057286] evm: security.SMACK64 [ 0.057286] evm: security.SMACK64EXEC [ 0.057287] evm: security.SMACK64TRANSMUTE [ 0.057287] evm: security.SMACK64MMAP [ 0.057288] evm: security.apparmor [ 0.057289] evm: security.ima [ 0.057289] evm: security.capability [ 0.057305] PM: Registering ACPI NVS region [mem 0x9ce7f000-0x9cf7efff] (1048576 bytes) [ 0.057305] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.057305] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.057305] pinctrl core: initialized pinctrl subsystem [ 0.057305] RTC time: 18:40:00, date: 10/09/18 [ 0.057305] NET: Registered protocol family 16 [ 0.057305] audit: initializing netlink subsys (disabled) [ 0.057305] audit: type=2000 audit(1539110400.056:1): state=initialized audit_enabled=0 res=1 [ 0.057305] cpuidle: using governor ladder [ 0.057305] cpuidle: using governor menu [ 0.057305] Simple Boot Flag at 0x44 set to 0x1 [ 0.057305] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.057305] ACPI: bus type PCI registered [ 0.057305] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.057305] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.057305] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.057305] PCI: Using configuration type 1 for base access [ 0.057305] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.060249] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.060249] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.060251] ACPI: Added _OSI(Module Device) [ 0.060251] ACPI: Added _OSI(Processor Device) [ 0.060251] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.060251] ACPI: Added _OSI(Processor Aggregator Device) [ 0.060251] ACPI: Added _OSI(Linux-Dell-Video) [ 0.060251] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.060310] ACPI: Executed 1 blocks of module-level executable AML code [ 0.068000] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.177166] ACPI: Dynamic OEM Table Load: [ 0.177174] ACPI: SSDT 0xFFFF94350C516000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.177840] ACPI: Dynamic OEM Table Load: [ 0.177847] ACPI: SSDT 0xFFFF94350C8D2800 0005AA (v01 PmRef ApIst 00003000 INTL 20120913) [ 0.178564] ACPI: Dynamic OEM Table Load: [ 0.178570] ACPI: SSDT 0xFFFF94350C519000 000119 (v01 PmRef ApCst 00003000 INTL 20120913) [ 0.181165] ACPI: EC: EC started [ 0.181166] ACPI: EC: interrupt blocked [ 0.211512] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as first EC [ 0.211514] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.211516] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions [ 0.211516] ACPI: Interpreter enabled [ 0.211557] ACPI: (supports S0 S3 S4 S5) [ 0.211558] ACPI: Using IOAPIC for interrupt routing [ 0.211593] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.211944] ACPI: Enabled 10 GPEs in block 00 to 3F [ 0.255242] ACPI: Power Resource [NVP3] (on) [ 0.255300] ACPI: Power Resource [NVP2] (on) [ 0.264288] ACPI: Power Resource [FN00] (on) [ 0.265370] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.265376] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.265501] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.266253] PCI host bridge to bus 0000:00 [ 0.266256] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.266257] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.266259] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.266260] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.266262] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.266263] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.266264] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.266266] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.266267] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.266269] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.266270] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.266271] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.266273] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.266274] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.266276] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.266277] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] [ 0.266279] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window] [ 0.266280] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.266289] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000 [ 0.266530] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 [ 0.266572] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.266858] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000 [ 0.266870] pci 0000:00:02.0: reg 0x10: [mem 0xd3000000-0xd33fffff 64bit] [ 0.266876] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.266881] pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f] [ 0.266895] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.267145] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.267156] pci 0000:00:03.0: reg 0x10: [mem 0xd3710000-0xd3713fff 64bit] [ 0.267419] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.267441] pci 0000:00:14.0: reg 0x10: [mem 0xd3700000-0xd370ffff 64bit] [ 0.267503] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.267725] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.267748] pci 0000:00:16.0: reg 0x10: [mem 0xd3718000-0xd371800f 64bit] [ 0.267812] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.268044] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.268065] pci 0000:00:1b.0: reg 0x10: [mem 0xd3714000-0xd3717fff 64bit] [ 0.268135] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.268365] pci 0000:00:1c.0: [8086:8c14] type 01 class 0x060400 [ 0.268439] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.268727] pci 0000:00:1c.2: [8086:8c10] type 01 class 0x060400 [ 0.268801] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.269082] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.269156] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.269439] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400 [ 0.269513] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.269796] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.269819] pci 0000:00:1d.0: reg 0x10: [mem 0xd371c000-0xd371c3ff] [ 0.269901] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.270128] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100 [ 0.270449] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601 [ 0.270468] pci 0000:00:1f.2: reg 0x10: [io 0x6088-0x608f] [ 0.270476] pci 0000:00:1f.2: reg 0x14: [io 0x6094-0x6097] [ 0.270484] pci 0000:00:1f.2: reg 0x18: [io 0x6080-0x6087] [ 0.270491] pci 0000:00:1f.2: reg 0x1c: [io 0x6090-0x6093] [ 0.270499] pci 0000:00:1f.2: reg 0x20: [io 0x6060-0x607f] [ 0.270507] pci 0000:00:1f.2: reg 0x24: [mem 0xd371b000-0xd371b7ff] [ 0.270545] pci 0000:00:1f.2: PME# supported from D3hot [ 0.270761] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.270780] pci 0000:00:1f.3: reg 0x10: [mem 0xd3719000-0xd37190ff 64bit] [ 0.270800] pci 0000:00:1f.3: reg 0x20: [io 0x6040-0x605f] [ 0.271086] pci 0000:01:00.0: [10de:0fe4] type 00 class 0x030200 [ 0.271112] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff] [ 0.271126] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref] [ 0.271140] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref] [ 0.271150] pci 0000:01:00.0: reg 0x24: [io 0x5000-0x507f] [ 0.271160] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref] [ 0.280018] pci 0000:00:01.0: PCI bridge to [bus 01-06] [ 0.280021] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 0.280024] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd2ffffff] [ 0.280027] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref] [ 0.280155] pci 0000:07:00.0: [8086:0887] type 00 class 0x028000 [ 0.280215] pci 0000:07:00.0: reg 0x10: [mem 0xd3600000-0xd3601fff 64bit] [ 0.280443] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.292049] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.292055] pci 0000:00:1c.0: bridge window [mem 0xd3600000-0xd36fffff] [ 0.292120] pci 0000:00:1c.2: PCI bridge to [bus 08] [ 0.292266] pci 0000:09:00.0: [10ec:5227] type 00 class 0xff0000 [ 0.292376] pci 0000:09:00.0: reg 0x10: [mem 0xd1000000-0xd1000fff] [ 0.292807] pci 0000:09:00.0: supports D1 D2 [ 0.292809] pci 0000:09:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.304052] pci 0000:00:1c.3: PCI bridge to [bus 09-0e] [ 0.304056] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] [ 0.304059] pci 0000:00:1c.3: bridge window [mem 0xd1000000-0xd1ffffff] [ 0.304065] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref] [ 0.304149] pci 0000:0f:00.0: [10ec:8168] type 00 class 0x020000 [ 0.304181] pci 0000:0f:00.0: reg 0x10: [io 0x3000-0x30ff] [ 0.304209] pci 0000:0f:00.0: reg 0x18: [mem 0xd3500000-0xd3500fff 64bit] [ 0.304227] pci 0000:0f:00.0: reg 0x20: [mem 0xd3400000-0xd3403fff 64bit pref] [ 0.304328] pci 0000:0f:00.0: supports D1 D2 [ 0.304329] pci 0000:0f:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.316021] pci 0000:00:1c.6: PCI bridge to [bus 0f] [ 0.316025] pci 0000:00:1c.6: bridge window [io 0x3000-0x3fff] [ 0.316029] pci 0000:00:1c.6: bridge window [mem 0xd3500000-0xd35fffff] [ 0.316034] pci 0000:00:1c.6: bridge window [mem 0xd3400000-0xd34fffff 64bit pref] [ 0.317072] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.317148] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.317220] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.317292] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.317363] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.317434] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.317505] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.317577] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.318230] ACPI: EC: interrupt unblocked [ 0.318236] ACPI: EC: event unblocked [ 0.318254] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.318256] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions and events [ 0.318510] SCSI subsystem initialized [ 0.318524] libata version 3.00 loaded. [ 0.318524] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.318524] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.318524] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.318524] vgaarb: loaded [ 0.318524] ACPI: bus type USB registered [ 0.318524] usbcore: registered new interface driver usbfs [ 0.318524] usbcore: registered new interface driver hub [ 0.318524] usbcore: registered new device driver usb [ 0.318524] EDAC MC: Ver: 3.0.0 [ 0.318524] Registered efivars operations [ 0.392099] PCI: Using ACPI for IRQ routing [ 0.395111] PCI: pci_cache_line_size set to 64 bytes [ 0.395262] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff] [ 0.395264] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff] [ 0.395265] e820: reserve RAM buffer [mem 0x9c67f000-0x9fffffff] [ 0.395266] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff] [ 0.395267] e820: reserve RAM buffer [mem 0x45f600000-0x45fffffff] [ 0.395362] NetLabel: Initializing [ 0.395363] NetLabel: domain hash size = 128 [ 0.395363] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.395378] NetLabel: unlabeled traffic allowed by default [ 0.396306] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.396313] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.401027] clocksource: Switched to clocksource hpet [ 0.410831] VFS: Disk quotas dquot_6.6.0 [ 0.410847] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.410945] AppArmor: AppArmor Filesystem Enabled [ 0.410972] pnp: PnP ACPI init [ 0.411172] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.411175] system 00:00: [io 0xffff] has been reserved [ 0.411176] system 00:00: [io 0xffff] has been reserved [ 0.411178] system 00:00: [io 0xffff] has been reserved [ 0.411180] system 00:00: [io 0x0500-0x0501] has been reserved [ 0.411181] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.411183] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.411188] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.411248] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.411252] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.411277] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.411334] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.411338] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.411367] pnp 00:04: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active) [ 0.411396] pnp 00:05: Plug and Play ACPI device, IDs SYN1e90 SYN1e00 SYN0002 PNP0f13 PNP0f03 (active) [ 0.411593] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.411595] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.411596] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.411598] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.411600] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved [ 0.411602] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.411603] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.411605] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved [ 0.411607] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.411609] system 00:06: [mem 0x9fa20000-0x9fa20fff] has been reserved [ 0.411611] system 00:06: [mem 0x9fa10000-0x9fa1ffff] has been reserved [ 0.411614] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.412540] pnp: PnP ACPI: found 7 devices [ 0.418755] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.418760] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window [ 0.418796] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref] [ 0.418799] pci 0000:00:01.0: PCI bridge to [bus 01-06] [ 0.418801] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 0.418804] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd2ffffff] [ 0.418807] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref] [ 0.418811] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.418816] pci 0000:00:1c.0: bridge window [mem 0xd3600000-0xd36fffff] [ 0.418825] pci 0000:00:1c.2: PCI bridge to [bus 08] [ 0.418836] pci 0000:00:1c.3: PCI bridge to [bus 09-0e] [ 0.418839] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] [ 0.418844] pci 0000:00:1c.3: bridge window [mem 0xd1000000-0xd1ffffff] [ 0.418848] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref] [ 0.418854] pci 0000:00:1c.6: PCI bridge to [bus 0f] [ 0.418857] pci 0000:00:1c.6: bridge window [io 0x3000-0x3fff] [ 0.418862] pci 0000:00:1c.6: bridge window [mem 0xd3500000-0xd35fffff] [ 0.418865] pci 0000:00:1c.6: bridge window [mem 0xd3400000-0xd34fffff 64bit pref] [ 0.418871] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.418873] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.418875] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.418876] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.418878] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.418879] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.418881] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.418882] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.418883] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.418885] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.418886] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.418888] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] [ 0.418889] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] [ 0.418891] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] [ 0.418892] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] [ 0.418894] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window] [ 0.418895] pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff window] [ 0.418897] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] [ 0.418898] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd2ffffff] [ 0.418900] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref] [ 0.418901] pci_bus 0000:07: resource 1 [mem 0xd3600000-0xd36fffff] [ 0.418903] pci_bus 0000:09: resource 0 [io 0x4000-0x4fff] [ 0.418904] pci_bus 0000:09: resource 1 [mem 0xd1000000-0xd1ffffff] [ 0.418906] pci_bus 0000:09: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref] [ 0.418907] pci_bus 0000:0f: resource 0 [io 0x3000-0x3fff] [ 0.418909] pci_bus 0000:0f: resource 1 [mem 0xd3500000-0xd35fffff] [ 0.418910] pci_bus 0000:0f: resource 2 [mem 0xd3400000-0xd34fffff 64bit pref] [ 0.419045] NET: Registered protocol family 2 [ 0.419237] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.419418] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.419535] TCP: Hash tables configured (established 131072 bind 65536) [ 0.419572] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.419612] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.419679] NET: Registered protocol family 1 [ 0.419692] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.440219] PCI: CLS 64 bytes, default 64 [ 0.440251] Unpacking initramfs... [ 1.267930] Freeing initrd memory: 54220K [ 1.267979] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.267982] software IO TLB [mem 0x981e7000-0x9c1e7000] (64MB) mapped at [ (ptrval)- (ptrval)] [ 1.268327] Scanning for low memory corruption every 60 seconds [ 1.268994] Initialise system trusted keyrings [ 1.269003] Key type blacklist registered [ 1.269038] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 1.270142] zbud: loaded [ 1.270629] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.270754] fuse init (API version 7.26) [ 1.272111] Key type asymmetric registered [ 1.272113] Asymmetric key parser 'x509' registered [ 1.272142] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.272178] io scheduler noop registered [ 1.272178] io scheduler deadline registered [ 1.272218] io scheduler cfq registered (default) [ 1.273123] efifb: probing for efifb [ 1.273134] efifb: framebuffer at 0xc0000000, using 8128k, total 8128k [ 1.273135] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 1.273136] efifb: scrolling: redraw [ 1.273137] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.273227] Console: switching to colour frame buffer device 240x67 [ 1.273254] fb0: EFI VGA frame buffer device [ 1.273262] intel_idle: MWAIT substates: 0x42120 [ 1.273263] intel_idle: v0.4.1 model 0x3C [ 1.273548] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.480175] ACPI: AC Adapter [AC] (on-line) [ 1.480265] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 1.480273] ACPI: Lid Switch [LID0] [ 1.480303] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.480312] ACPI: Power Button [PWRB] [ 1.480343] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.480420] ACPI: Power Button [PWRF] [ 1.488015] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 1.488419] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.488420] ACPI: Thermal Zone [TZ00] (59 C) [ 1.489666] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.489668] ACPI: Thermal Zone [TZ01] (52 C) [ 1.490739] random: fast init done [ 1.492758] thermal LNXTHERM:02: registered as thermal_zone2 [ 1.492759] ACPI: Thermal Zone [TZ02] (42 C) [ 1.492940] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.511104] Linux agpgart interface v0.103 [ 1.513086] loop: module loaded [ 1.513242] libphy: Fixed MDIO Bus: probed [ 1.513243] tun: Universal TUN/TAP device driver, 1.6 [ 1.513279] PPP generic driver version 2.4.2 [ 1.513320] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.513322] ehci-pci: EHCI PCI platform driver [ 1.513913] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.513918] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 1.513930] ehci-pci 0000:00:1d.0: debug port 2 [ 1.517819] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.517831] ehci-pci 0000:00:1d.0: irq 17, io mem 0xd371c000 [ 1.518867] ACPI: Battery Slot [BAT0] (battery present) [ 1.532020] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.532059] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.532061] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.532062] usb usb1: Product: EHCI Host Controller [ 1.532064] usb usb1: Manufacturer: Linux 4.15.0-36-generic ehci_hcd [ 1.532065] usb usb1: SerialNumber: 0000:00:1d.0 [ 1.532198] hub 1-0:1.0: USB hub found [ 1.532204] hub 1-0:1.0: 2 ports detected [ 1.532349] ehci-platform: EHCI generic platform driver [ 1.532358] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.532361] ohci-pci: OHCI PCI platform driver [ 1.532368] ohci-platform: OHCI generic platform driver [ 1.532373] uhci_hcd: USB Universal Host Controller Interface driver [ 1.532511] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.532515] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.533603] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 1.533607] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.533730] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.533732] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.533733] usb usb2: Product: xHCI Host Controller [ 1.533735] usb usb2: Manufacturer: Linux 4.15.0-36-generic xhci-hcd [ 1.533736] usb usb2: SerialNumber: 0000:00:14.0 [ 1.533823] hub 2-0:1.0: USB hub found [ 1.533840] hub 2-0:1.0: 14 ports detected [ 1.537216] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.537219] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.537222] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.537257] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.537259] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.537260] usb usb3: Product: xHCI Host Controller [ 1.537261] usb usb3: Manufacturer: Linux 4.15.0-36-generic xhci-hcd [ 1.537263] usb usb3: SerialNumber: 0000:00:14.0 [ 1.537361] hub 3-0:1.0: USB hub found [ 1.537373] hub 3-0:1.0: 6 ports detected [ 1.538057] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.543209] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.543212] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.543325] mousedev: PS/2 mouse device common for all mice [ 1.543489] rtc_cmos 00:02: RTC can wake from S4 [ 1.543667] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.543701] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.543707] i2c /dev entries driver [ 1.543711] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0 [ 1.543771] device-mapper: uevent: version 1.0.3 [ 1.543840] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 1.543845] intel_pstate: Intel P-state driver initializing [ 1.544199] ledtrig-cpu: registered to indicate activity on CPUs [ 1.544201] EFI Variables Facility v0.08 2004-May-17 [ 1.563545] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.609584] NET: Registered protocol family 10 [ 1.613523] Segment Routing with IPv6 [ 1.613541] NET: Registered protocol family 17 [ 1.613688] Key type dns_resolver registered [ 1.614215] RAS: Correctable Errors collector initialized. [ 1.614261] microcode: sig=0x306c3, pf=0x10, revision=0x25 [ 1.614374] microcode: Microcode Update Driver: v2.2. [ 1.614384] sched_clock: Marking stable (1614368670, 0)->(1635619604, -21250934) [ 1.614641] registered taskstats version 1 [ 1.614650] Loading compiled-in X.509 certificates [ 1.617125] Loaded X.509 cert 'Build time autogenerated kernel key: fcd93cd0852f7ae1da10896371e06e3c19479c00' [ 1.617803] Couldn't get size: 0x800000000000000e [ 1.617806] MODSIGN: Couldn't get UEFI db list [ 1.619915] Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring [ 1.623003] zswap: loaded using pool lzo/zbud [ 1.625878] Key type big_key registered [ 1.625880] Key type trusted registered [ 1.627084] Key type encrypted registered [ 1.627086] AppArmor: AppArmor sha1 policy hashing enabled [ 1.627088] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.627091] ima: Allocated hash algorithm: sha1 [ 1.627100] evm: HMAC attrs: 0x1 [ 1.627691] Magic number: 6:742:695 [ 1.627733] pci 0000:00:00.0: hash matches [ 1.627838] rtc_cmos 00:02: setting system clock to 2018-10-09 18:40:02 UTC (1539110402) [ 1.627886] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.627886] EDD information not available. [ 1.872049] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.884032] usb 2-2: new full-speed USB device number 2 using xhci_hcd [ 1.938111] Freeing unused kernel memory: 2408K [ 1.972073] Write protecting the kernel read-only data: 20480k [ 1.973289] Freeing unused kernel memory: 2008K [ 1.976532] Freeing unused kernel memory: 1896K [ 1.981144] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.981145] x86/mm: Checking user space page tables [ 1.985672] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.996416] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.996508] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.996515] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.032413] usb 1-1: New USB device found, idVendor=8087, idProduct=8000 [ 2.032416] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.032696] hub 1-1:1.0: USB hub found [ 2.032769] hub 1-1:1.0: 8 ports detected [ 2.037148] usb 2-2: New USB device found, idVendor=045e, idProduct=07b2 [ 2.037149] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.037151] usb 2-2: Product: Microsoft® Nano Transceiver v1.0 [ 2.037152] usb 2-2: Manufacturer: Microsoft [ 2.050749] wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found [ 2.050752] wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found [ 2.050754] wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found [ 2.050756] wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found [ 2.050971] wmi_bus wmi_bus-PNP0C14:01: WQBJ data block query control method not found [ 2.063466] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.063474] r8169 0000:0f:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.067619] ahci 0000:00:1f.2: version 3.0 [ 2.067835] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x15 impl SATA mode [ 2.067839] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 2.073096] r8169 0000:0f:00.0 eth0: RTL8168g/8111g at 0x (ptrval), a4:5d:36:c0:9d:6a, XID 0c000800 IRQ 27 [ 2.073097] r8169 0000:0f:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.087357] r8169 0000:0f:00.0 eno1: renamed from eth0 [ 2.092053] scsi host0: ahci [ 2.092177] scsi host1: ahci [ 2.092284] scsi host2: ahci [ 2.092360] scsi host3: ahci [ 2.092427] scsi host4: ahci [ 2.092489] scsi host5: ahci [ 2.092516] ata1: SATA max UDMA/133 abar m2048@0xd371b000 port 0xd371b100 irq 26 [ 2.092517] ata2: DUMMY [ 2.092520] ata3: SATA max UDMA/133 abar m2048@0xd371b000 port 0xd371b200 irq 26 [ 2.092520] ata4: DUMMY [ 2.092522] ata5: SATA max UDMA/133 abar m2048@0xd371b000 port 0xd371b300 irq 26 [ 2.092523] ata6: DUMMY [ 2.097179] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170831/nsarguments-100) [ 2.097530] i915 0000:00:02.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported [ 2.097538] [drm] Memory usable by graphics device = 2048M [ 2.097540] checking generic (c0000000 7f0000) vs hw (c0000000 10000000) [ 2.097541] fb: switching to inteldrmfb from EFI VGA [ 2.097554] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170831/nsarguments-100) [ 2.097562] Console: switching to colour dummy device 80x25 [ 2.097637] [drm] Replacing VGA console driver [ 2.097666] [drm] ACPI BIOS requests an excessive sleep of 40000 ms, using 1500 ms instead [ 2.097826] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported [ 2.097838] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle [ 2.097838] nouveau: detected PR support, will not use DSM [ 2.097854] nouveau 0000:01:00.0: enabling device (0006 -> 0007) [ 2.098052] nouveau 0000:01:00.0: NVIDIA GK107 (0e7240a2) [ 2.103631] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.103632] [drm] Driver supports precise vblank timestamp query. [ 2.106171] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.141789] nouveau 0000:01:00.0: bios: version 80.07.b6.00.0e [ 2.164064] usb 2-5: new full-speed USB device number 3 using xhci_hcd [ 2.226373] nouveau 0000:01:00.0: fb: 2048 MiB DDR3 [ 2.226634] nouveau 0000:01:00.0: bus: MMIO write of 00000002 FAULT at 4188ac [ IBUS ] [ 2.300046] tsc: Refined TSC clocksource calibration: 2194.917 MHz [ 2.300053] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa37107ca2, max_idle_ns: 440795258165 ns [ 2.301853] vga_switcheroo: enabled [ 2.301947] [TTM] Zone kernel: Available graphics memory: 8178036 kiB [ 2.301948] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 2.301948] [TTM] Initializing pool allocator [ 2.301951] [TTM] Initializing DMA pool allocator [ 2.301961] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB [ 2.301962] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 2.301965] nouveau 0000:01:00.0: DRM: Pointer to TMDS table invalid [ 2.301966] nouveau 0000:01:00.0: DRM: DCB version 4.0 [ 2.304387] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies [ 2.304394] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1 [ 2.304711] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0 [ 2.313207] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no) [ 2.313215] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 2.313225] No Local Variables are initialized for Method [_BCL] [ 2.313227] No Arguments are initialized for method [_BCL] [ 2.313229] ACPI Error: Method parse/execution failed \_SB.PCI0.PEG0.PEGP.DD02._BCL, AE_NOT_FOUND (20170831/psparse-550) [ 2.313469] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4b/LNXVIDEO:00/input/input6 [ 2.314932] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.316072] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7 [ 2.319517] usb 2-5: New USB device found, idVendor=8087, idProduct=07da [ 2.319519] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.326280] fbcon: inteldrmfb (fb0) is primary device [ 2.326331] Console: switching to colour frame buffer device 240x67 [ 2.326359] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.407794] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.409403] ata1.00: supports DRM functions and may not be fully accessible [ 2.409992] ata1.00: NCQ Send/Recv Log not supported [ 2.409994] ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT01B6Q, max UDMA/133 [ 2.409995] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 2.411333] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.411343] ata1.00: supports DRM functions and may not be fully accessible [ 2.411802] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.411812] ata1.00: NCQ Send/Recv Log not supported [ 2.412921] ata1.00: configured for UDMA/133 [ 2.413136] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5 [ 2.413444] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.413533] ata3.00: ATAPI: hp DVDRAM GU70N, U703, max UDMA/100 [ 2.413633] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 2.413678] sd 0:0:0:0: [sda] Write Protect is off [ 2.413680] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.413790] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.415536] ata3.00: configured for UDMA/100 [ 2.415618] sda: sda1 sda2 sda3 sda4 [ 2.416286] scsi 2:0:0:0: CD-ROM hp DVDRAM GU70N U703 PQ: 0 ANSI: 5 [ 2.416666] sd 0:0:0:0: [sda] supports TCG Opal [ 2.416667] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.417642] ata5.00: ATA-9: ST1000LM024 HN-M101MBB, 2AR20002, max UDMA/133 [ 2.417643] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.423981] ata5.00: configured for UDMA/133 [ 2.448054] usb 2-7: new high-speed USB device number 4 using xhci_hcd [ 2.474087] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.474089] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.474187] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 2.474236] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 2.474443] scsi 4:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0002 PQ: 0 ANSI: 5 [ 2.474688] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 2.474764] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.474766] sd 4:0:0:0: [sdb] 4096-byte physical blocks [ 2.474786] sd 4:0:0:0: [sdb] Write Protect is off [ 2.474788] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.474818] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.547253] psmouse serio1: synaptics: queried max coordinates: x [..5660], y [..4702] [ 2.578419] psmouse serio1: synaptics: queried min coordinates: x [1282..], y [1152..] [ 2.578425] psmouse serio1: synaptics: Your touchpad (PNP: SYN1e90 SYN1e00 SYN0002 PNP0f13 PNP0f03) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org. [ 2.637181] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x127c00/0x0, board id: 2667, fw id: 1280283 [ 2.650429] usb 2-7: New USB device found, idVendor=0bda, idProduct=571a [ 2.650431] usb 2-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.650433] usb 2-7: Product: HP Truevision HD [ 2.650435] usb 2-7: Manufacturer: DDFEP019I4L7HK [ 2.650436] usb 2-7: SerialNumber: 200901010001 [ 2.676051] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 2.780074] usb 2-14: new full-speed USB device number 5 using xhci_hcd [ 2.827221] sdb: sdb1 [ 2.827646] sd 4:0:0:0: [sdb] Attached SCSI disk [ 2.929375] usb 2-14: New USB device found, idVendor=138a, idProduct=0050 [ 2.929378] usb 2-14: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 2.929379] usb 2-14: SerialNumber: d0100030903d [ 2.933075] hidraw: raw HID events driver (C) Jiri Kosina [ 2.944904] usbcore: registered new interface driver usbhid [ 2.944905] usbhid: USB HID core driver [ 2.948033] input: Microsoft Microsoft® Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:045E:07B2.0001/input/input8 [ 3.008161] hid-generic 0003:045E:07B2.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® Nano Transceiver v1.0] on usb-0000:00:14.0-2/input0 [ 3.008362] input: Microsoft Microsoft® Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/0003:045E:07B2.0002/input/input9 [ 3.008442] hid-generic 0003:045E:07B2.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® Nano Transceiver v1.0] on usb-0000:00:14.0-2/input1 [ 3.008782] input: Microsoft Microsoft® Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.2/0003:045E:07B2.0003/input/input10 [ 3.068203] hid-generic 0003:045E:07B2.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® Nano Transceiver v1.0] on usb-0000:00:14.0-2/input2 [ 3.145841] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 3.238393] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.324399] clocksource: Switched to clocksource tsc [ 3.345768] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.364299] systemd[1]: Detected architecture x86-64. [ 3.366194] systemd[1]: Set hostname to . [ 3.437594] systemd[1]: Reached target User and Group Name Lookups. [ 3.437692] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.437861] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.437875] systemd[1]: Reached target Remote File Systems. [ 3.438045] systemd[1]: Created slice System Slice. [ 3.438111] systemd[1]: Listening on fsck to fsckd communication Socket. [ 3.438241] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 3.446236] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro [ 3.453137] lp: driver loaded but no devices found [ 3.456458] ppdev: user-space parallel port driver [ 3.499094] systemd-journald[311]: Received request to flush runtime journal from PID 1 [ 3.521993] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS [ 3.571660] input: HP Wireless hotkeys as /devices/virtual/input/input11 [ 3.580913] hp_accel: laptop model unknown, using default axes configuration [ 3.587627] lis3lv02d: 8 bits 3DC sensor found [ 3.628590] EDAC ie31200: No ECC support [ 3.630479] media: Linux media interface: v0.10 [ 3.635154] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170831/utaddress-247) [ 3.635161] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000183F (\_SB.PCI0.LPCB.PMBS) (20170831/utaddress-247) [ 3.635167] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.635269] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x0000000000000863 (\GPIO) (20170831/utaddress-247) [ 3.635273] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170831/utaddress-247) [ 3.635277] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.639407] Linux video capture interface: v2.00 [ 3.643890] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20170831/utaddress-247) [ 3.643899] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x0000000000000863 (\GPIO) (20170831/utaddress-247) [ 3.643904] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170831/utaddress-247) [ 3.643909] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\_SB.PCI0.LPCB.GPIO) (20170831/utaddress-247) [ 3.643917] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.643932] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20170831/utaddress-247) [ 3.643936] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\IO_D) (20170831/utaddress-247) [ 3.643941] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x0000000000000863 (\GPIO) (20170831/utaddress-247) [ 3.643945] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170831/utaddress-247) [ 3.643950] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\_SB.PCI0.LPCB.GPIO) (20170831/utaddress-247) [ 3.643956] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.643957] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 3.644727] Bluetooth: Core ver 2.22 [ 3.644747] NET: Registered protocol family 31 [ 3.644748] Bluetooth: HCI device and connection manager initialized [ 3.644751] Bluetooth: HCI socket layer initialized [ 3.644754] Bluetooth: L2CAP socket layer initialized [ 3.644760] Bluetooth: SCO socket layer initialized [ 3.652448] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.653232] usbcore: registered new interface driver btusb [ 3.659759] uvcvideo: Found UVC 1.00 device HP Truevision HD (0bda:571a) [ 3.664940] uvcvideo 2-7:1.0: Entity type for entity Extension 5 was not initialized! [ 3.664943] uvcvideo 2-7:1.0: Entity type for entity Extension 2 was not initialized! [ 3.664945] uvcvideo 2-7:1.0: Entity type for entity Processing 3 was not initialized! [ 3.664946] uvcvideo 2-7:1.0: Entity type for entity Camera 1 was not initialized! [ 3.665037] input: HP Truevision HD: HP Truevision as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input12 [ 3.665124] usbcore: registered new interface driver uvcvideo [ 3.665125] USB Video Class driver (1.1.1) [ 3.674223] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.675103] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.689645] Intel(R) Wireless WiFi driver for Linux [ 3.689646] Copyright(c) 2003- 2015 Intel Corporation [ 3.689908] iwlwifi 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control [ 3.692856] iwlwifi 0000:07:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 3.711697] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 3.711699] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 3.711700] RAPL PMU: hw unit of domain package 2^-14 Joules [ 3.711701] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 3.711701] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 3.728289] iwlwifi 0000:07:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 3.728291] iwlwifi 0000:07:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 3.728293] iwlwifi 0000:07:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 3.728295] iwlwifi 0000:07:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8 [ 3.729099] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 3.735146] AVX2 version of gcm_enc/dec engaged. [ 3.735148] AES CTR mode by8 optimization enabled [ 3.745120] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input14 [ 3.757140] snd_hda_codec_idt hdaudioC1D0: autoconfig for 92HD91BXX: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker [ 3.757143] snd_hda_codec_idt hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.757145] snd_hda_codec_idt hdaudioC1D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 3.757146] snd_hda_codec_idt hdaudioC1D0: mono: mono_out=0x0 [ 3.757147] snd_hda_codec_idt hdaudioC1D0: inputs: [ 3.757149] snd_hda_codec_idt hdaudioC1D0: Internal Mic=0x11 [ 3.757151] snd_hda_codec_idt hdaudioC1D0: Mic=0xa [ 3.761233] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15 [ 3.761310] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16 [ 3.761357] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17 [ 3.761408] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18 [ 3.761454] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19 [ 3.772051] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 3.822795] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20 [ 3.822906] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21 [ 3.836465] intel_rapl: Found RAPL domain package [ 3.836466] intel_rapl: Found RAPL domain core [ 3.836467] intel_rapl: Found RAPL domain uncore [ 3.836468] intel_rapl: Found RAPL domain dram [ 3.836471] intel_rapl: RAPL package 0 domain package locked by BIOS [ 3.845857] iwlwifi 0000:07:00.0 wlo1: renamed from wlan0 [ 4.117746] random: crng init done [ 4.117747] random: 7 urandom warning(s) missed due to ratelimiting [ 4.412728] hp_wmi: query 0xd returned error 0x5 [ 4.412806] input: HP WMI hotkeys as /devices/virtual/input/input13 [ 5.302833] audit: type=1400 audit(1539110406.168:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=918 comm="apparmor_parser" [ 5.302849] audit: type=1400 audit(1539110406.168:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=920 comm="apparmor_parser" [ 5.303337] audit: type=1400 audit(1539110406.168:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=917 comm="apparmor_parser" [ 5.303929] audit: type=1400 audit(1539110406.168:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=916 comm="apparmor_parser" [ 5.303932] audit: type=1400 audit(1539110406.168:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=916 comm="apparmor_parser" [ 5.303935] audit: type=1400 audit(1539110406.168:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=916 comm="apparmor_parser" [ 5.304519] audit: type=1400 audit(1539110406.172:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=921 comm="apparmor_parser" [ 5.304523] audit: type=1400 audit(1539110406.172:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=921 comm="apparmor_parser" [ 5.304934] audit: type=1400 audit(1539110406.172:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=924 comm="apparmor_parser" [ 5.305490] audit: type=1400 audit(1539110406.172:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=922 comm="apparmor_parser" [ 5.401759] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.401761] Bluetooth: BNEP filters: protocol multicast [ 5.401764] Bluetooth: BNEP socket layer initialized [ 5.641852] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 5.714268] r8169 0000:0f:00.0 eno1: link down [ 5.714269] r8169 0000:0f:00.0 eno1: link down [ 5.714366] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 5.717213] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 5.731086] iwlwifi 0000:07:00.0: Radio type=0x2-0x0-0x0 [ 6.005961] iwlwifi 0000:07:00.0: Radio type=0x2-0x0-0x0 [ 6.079925] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 6.150760] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 8.591289] r8169 0000:0f:00.0 eno1: link up [ 8.591297] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 16.676584] nouveau 0000:01:00.0: bus: MMIO write of 00000002 FAULT at 4188ac [ IBUS ] [ 17.972001] Bluetooth: RFCOMM TTY layer initialized [ 17.972006] Bluetooth: RFCOMM socket layer initialized [ 17.972010] Bluetooth: RFCOMM ver 1.11 [ 18.811785] rfkill: input handler disabled [ 120.452176] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [ 120.452180] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [ 120.464891] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [ 120.464895] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [ 120.622583] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [ 120.622586] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [ 120.637170] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [ 120.637173] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [ 120.788489] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [ 120.788491] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [ 120.801291] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [ 120.801294] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [ 121.429682] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [ 121.429688] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [ 121.442414] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [ 121.442419] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [ 121.607266] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [ 121.607268] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [ 121.620491] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [ 121.620494] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [ 121.757485] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [ 121.757488] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [ 121.770209] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [ 121.770213] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [ 122.387171] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [ 122.387178] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [ 122.400010] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [ 122.400017] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [ 122.765413] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [ 122.765416] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [ 122.778494] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [ 122.778497] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [ 122.890346] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [ 122.890349] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [ 122.903543] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [ 122.903545] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [ 123.029729] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [ 123.029733] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [ 123.042837] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [ 123.042840] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [ 123.353087] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [ 123.353092] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [ 123.366135] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [ 123.366140] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [ 123.401165] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [ 123.401167] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [ 123.413901] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [ 123.413905] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [ 123.446638] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [ 123.446642] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [ 123.459949] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [ 123.459952] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [12510.321463] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [12510.321467] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [12510.336023] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [12510.336026] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [12659.062648] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [12659.062651] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [12659.077383] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [12659.077385] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [12661.333902] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [12661.333908] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [12661.346950] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [12661.346956] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [12661.790759] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [12661.790764] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [12661.803487] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [12661.803492] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [12662.047977] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [12662.047980] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [12662.060709] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [12662.060713] atkbd serio0: Use 'setkeycodes e02b ' to make it known. [12761.296919] aufs 4.15-20180219 [12761.362669] kauditd_printk_skb: 28 callbacks suppressed [12761.362670] audit: type=1400 audit(1539123161.816:40): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=9936 comm="apparmor_parser" [12761.434115] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [12761.435391] Bridge firewalling registered [12761.442662] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [12761.757594] Initializing XFRM netlink socket [12761.761724] Netfilter messages via NETLINK v0.30. [12761.763225] ctnetlink v0.93: registering with nfnetlink. [12761.973580] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [12772.341643] docker0: port 1(vethc4271cd) entered blocking state [12772.341646] docker0: port 1(vethc4271cd) entered disabled state [12772.341728] device vethc4271cd entered promiscuous mode [12772.341879] IPv6: ADDRCONF(NETDEV_UP): vethc4271cd: link is not ready [12772.561374] eth0: renamed from veth30f1533 [12772.597234] IPv6: ADDRCONF(NETDEV_CHANGE): vethc4271cd: link becomes ready [12772.597346] docker0: port 1(vethc4271cd) entered blocking state [12772.597350] docker0: port 1(vethc4271cd) entered forwarding state [12772.597484] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready [12772.832289] docker0: port 1(vethc4271cd) entered disabled state [12772.832368] veth30f1533: renamed from eth0 [12772.913151] docker0: port 1(vethc4271cd) entered disabled state [12772.916550] device vethc4271cd left promiscuous mode [12772.916556] docker0: port 1(vethc4271cd) entered disabled state [13266.690843] nouveau 0000:01:00.0: bus: MMIO write of 00000002 FAULT at 4188ac [ IBUS ] [13266.912247] nouveau 0000:01:00.0: Direct firmware load for nouveau/nve7_fuc084 failed with error -2 [13266.912253] nouveau 0000:01:00.0: Direct firmware load for nouveau/nve7_fuc084d failed with error -2 [13266.912255] nouveau 0000:01:00.0: msvld: unable to load firmware data [13266.912258] nouveau 0000:01:00.0: msvld: init failed, -19 [13352.211435] rfkill: input handler enabled [13353.049606] nouveau 0000:01:00.0: bus: MMIO write of 00000002 FAULT at 4188ac [ IBUS ] [13363.245795] nouveau 0000:01:00.0: bus: MMIO write of 00000002 FAULT at 4188ac [ IBUS ] [13365.705012] rfkill: input handler disabled [13365.800470] nouveau 0000:01:00.0: Direct firmware load for nouveau/nve7_fuc084 failed with error -2 [13365.800480] nouveau 0000:01:00.0: Direct firmware load for nouveau/nve7_fuc084d failed with error -2 [13365.800483] nouveau 0000:01:00.0: msvld: unable to load firmware data [13365.800487] nouveau 0000:01:00.0: msvld: init failed, -19 [13380.925679] nouveau 0000:01:00.0: bus: MMIO write of 00000002 FAULT at 4188ac [ IBUS ] [13493.889328] rfkill: input handler enabled [13494.656744] nouveau 0000:01:00.0: bus: MMIO write of 00000002 FAULT at 4188ac [ IBUS ] [13502.380979] Could not find key with description: [2fb4fff7284ed698] [13502.380984] process_request_key_err: No key [13502.380985] Could not find valid key in user session keyring for sig specified in mount option: [2fb4fff7284ed698] [13502.380987] One or more global auth toks could not properly register; rc = [-2] [13502.380988] Error parsing options; rc = [-2] [13502.956558] nouveau 0000:01:00.0: bus: MMIO write of 00000002 FAULT at 4188ac [ IBUS ] [13505.314040] rfkill: input handler disabled [13658.763932] nouveau 0000:01:00.0: bus: MMIO write of 00000002 FAULT at 4188ac [ IBUS ] [13658.968045] nouveau 0000:01:00.0: Direct firmware load for nouveau/nve7_fuc084 failed with error -2 [13658.968054] nouveau 0000:01:00.0: Direct firmware load for nouveau/nve7_fuc084d failed with error -2 [13658.968057] nouveau 0000:01:00.0: msvld: unable to load firmware data [13658.968061] nouveau 0000:01:00.0: msvld: init failed, -19 [14308.903852] Bluetooth: hci0: last event is not cmd complete (0x0f) [14320.790314] input: 00:02:5B:00:80:23 as /devices/virtual/input/input22 [14325.900896] Bluetooth: hci0: last event is not cmd complete (0x0f) [14341.905913] Bluetooth: hci0: last event is not cmd complete (0x0f) [14362.904875] Bluetooth: hci0: last event is not cmd complete (0x0f) [14378.908906] Bluetooth: hci0: last event is not cmd complete (0x0f) [14394.907934] Bluetooth: hci0: last event is not cmd complete (0x0f) [14410.907911] Bluetooth: hci0: last event is not cmd complete (0x0f) [14426.907885] Bluetooth: hci0: last event is not cmd complete (0x0f) [14442.907982] Bluetooth: hci0: last event is not cmd complete (0x0f)