[ 0.000000] microcode: microcode updated early to revision 0xba, date = 2017-04-09 [ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x4e1 with crng_init=0 [ 0.000000] Linux version 4.13.0-16-generic (buildd@lcy01-02) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu2)) #19-Ubuntu SMP Wed Oct 11 18:35:14 UTC 2017 (Ubuntu 4.13.0-16.19-generic 4.13.4) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.13.0-16-generic.efi.signed root=/dev/mapper/vg--glider-root--ubuntu ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000008bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000008c000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000aa16ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000aa170000-0x00000000aa170fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000aa171000-0x00000000aa19afff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000aa19b000-0x00000000b63b5fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b63b6000-0x00000000b63fffff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000b6400000-0x00000000b7f75fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b7f76000-0x00000000b7fc5fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b7fc6000-0x00000000b7ffdfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000b7ffe000-0x00000000b7ffefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b7fff000-0x00000000b80fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b8600000-0x00000000bc7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f80fa000-0x00000000f80fafff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f80fd000-0x00000000f80fdfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000002427fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by Lenovo [ 0.000000] efi: SMBIOS=0xb7bfc000 ACPI=0xb7ffd000 ACPI 2.0=0xb7ffd014 MPS=0xb7f1f000 ESRT=0xb70d0000 [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: LENOVO 20FBCTO1WW/20FBCTO1WW, BIOS N1FET40W (1.14 ) 04/18/2016 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x242800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 1 base 00BC000000 mask 7FFC000000 uncachable [ 0.000000] 2 base 00BA000000 mask 7FFE000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0xb7fff max_arch_pfn = 0x400000000 [ 0.000000] esrt: Reserving ESRT space from 0x00000000b70d0000 to 0x00000000b70d0060. [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff94c300060000] 60000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x14d123000, 0x14d123fff] PGTABLE [ 0.000000] BRK [0x14d124000, 0x14d124fff] PGTABLE [ 0.000000] BRK [0x14d125000, 0x14d125fff] PGTABLE [ 0.000000] BRK [0x14d126000, 0x14d126fff] PGTABLE [ 0.000000] BRK [0x14d127000, 0x14d127fff] PGTABLE [ 0.000000] BRK [0x14d128000, 0x14d128fff] PGTABLE [ 0.000000] BRK [0x14d129000, 0x14d129fff] PGTABLE [ 0.000000] BRK [0x14d12a000, 0x14d12afff] PGTABLE [ 0.000000] BRK [0x14d12b000, 0x14d12bfff] PGTABLE [ 0.000000] Secure boot could not be determined [ 0.000000] RAMDISK: [mem 0x31a4d000-0x34d1dfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000B7FFD014 000024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 0x00000000B7FCF188 0000EC (v01 LENOVO TP-N1F 00000000 PTEC 00000002) [ 0.000000] ACPI: FACP 0x00000000B7FF1000 0000F4 (v05 LENOVO TP-N1F 00001140 PTEC 00000002) [ 0.000000] ACPI: DSDT 0x00000000B7FDA000 012F2C (v02 LENOVO TP-N1F 00001140 INTL 20141107) [ 0.000000] ACPI: FACS 0x00000000B7F90000 000040 [ 0.000000] ACPI: TCPA 0x00000000B7FFB000 000032 (v02 LENOVO TP-N1F 00000002 PTEC 00000002) [ 0.000000] ACPI: SSDT 0x00000000B7FFA000 0004B7 (v02 LENOVO Tpm2Tabl 00001000 INTL 20141107) [ 0.000000] ACPI: SSDT 0x00000000B7FF9000 00004B (v02 LENOVO MeSsdt 00003000 INTL 20141107) [ 0.000000] ACPI: TPM2 0x00000000B7FF8000 000034 (v03 LENOVO TP-N1F 00001140 PTEC 00000002) [ 0.000000] ACPI: UEFI 0x00000000B7FA7000 000042 (v01 LENOVO TP-N1F 00001140 PTEC 00000002) [ 0.000000] ACPI: SSDT 0x00000000B7FF3000 004E0A (v02 LENOVO SaSsdt 00003000 INTL 20141107) [ 0.000000] ACPI: SSDT 0x00000000B7FF2000 0005C5 (v02 LENOVO PerfTune 00001000 INTL 20141107) [ 0.000000] ACPI: ECDT 0x00000000B7FF0000 000052 (v01 LENOVO TP-N1F 00001140 PTEC 00000002) [ 0.000000] ACPI: HPET 0x00000000B7FEF000 000038 (v01 LENOVO TP-N1F 00001140 PTEC 00000002) [ 0.000000] ACPI: APIC 0x00000000B7FEE000 0000BC (v03 LENOVO TP-N1F 00001140 PTEC 00000002) [ 0.000000] ACPI: MCFG 0x00000000B7FED000 00003C (v01 LENOVO TP-N1F 00001140 PTEC 00000002) [ 0.000000] ACPI: SSDT 0x00000000B7FD8000 0018D2 (v01 LENOVO SataAhci 00001000 INTL 20141107) [ 0.000000] ACPI: SSDT 0x00000000B7FD7000 000264 (v02 LENOVO sensrhub 00000000 INTL 20141107) [ 0.000000] ACPI: DBGP 0x00000000B7FD6000 000034 (v01 LENOVO TP-N1F 00001140 PTEC 00000002) [ 0.000000] ACPI: DBG2 0x00000000B7FD5000 000054 (v00 LENOVO TP-N1F 00001140 PTEC 00000002) [ 0.000000] ACPI: BOOT 0x00000000B7FD4000 000028 (v01 LENOVO TP-N1F 00001140 PTEC 00000002) [ 0.000000] ACPI: BATB 0x00000000B7FD3000 000046 (v01 LENOVO TP-N1F 00001140 PTEC 00000002) [ 0.000000] ACPI: SSDT 0x00000000B7FD2000 000E73 (v02 LENOVO CpuSsdt 00003000 INTL 20141107) [ 0.000000] ACPI: SSDT 0x00000000B7FD1000 000403 (v02 LENOVO CtdpB 00001000 INTL 20141107) [ 0.000000] ACPI: MSDM 0x00000000B7FD0000 000055 (v03 LENOVO TP-N1F 00001140 PTEC 00000002) [ 0.000000] ACPI: DMAR 0x00000000B7FFC000 0000A8 (v01 LENOVO TP-N1F 00001140 PTEC 00000002) [ 0.000000] ACPI: ASF! 0x00000000B7FCE000 0000A5 (v32 LENOVO TP-N1F 00001140 PTEC 00000002) [ 0.000000] ACPI: FPDT 0x00000000B7FCD000 000044 (v01 LENOVO TP-N1F 00001140 PTEC 00000002) [ 0.000000] ACPI: UEFI 0x00000000B7F88000 00012A (v01 LENOVO TP-N1F 00001140 PTEC 00000002) [ 0.000000] ACPI: DMI detected: Lenovo ThinkPad X1 Carbon [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000002427fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x2427d5000-0x2427fffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000002427fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000008bfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000aa16ffff] [ 0.000000] node 0: [mem 0x00000000aa19b000-0x00000000b63b5fff] [ 0.000000] node 0: [mem 0x00000000b7ffe000-0x00000000b7ffefff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002427fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000002427fffff] [ 0.000000] On node 0 totalpages: 2067222 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 72 pages reserved [ 0.000000] DMA zone: 3978 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11599 pages used for memmap [ 0.000000] DMA32 zone: 742284 pages, LIFO batch:31 [ 0.000000] Normal zone: 20640 pages used for memmap [ 0.000000] Normal zone: 1320960 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x00000000ba800000-0x00000000bc7fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0008c000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xaa170000-0xaa170fff] [ 0.000000] PM: Registered nosave memory: [mem 0xaa171000-0xaa19afff] [ 0.000000] PM: Registered nosave memory: [mem 0xb63b6000-0xb63fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb6400000-0xb7f75fff] [ 0.000000] PM: Registered nosave memory: [mem 0xb7f76000-0xb7fc5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xb7fc6000-0xb7ffdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xb7fff000-0xb80fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb8100000-0xb85fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb8600000-0xbc7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbc800000-0xf80f9fff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80fa000-0xf80fafff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80fb000-0xf80fcfff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80fd000-0xf80fdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80fe000-0xfdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xffffffff] [ 0.000000] e820: [mem 0xbc800000-0xf80f9fff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 39 pages/cpu @ffff94c542400000 s119704 r8192 d31848 u524288 [ 0.000000] pcpu-alloc: s119704 r8192 d31848 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2034847 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.13.0-16-generic.efi.signed root=/dev/mapper/vg--glider-root--ubuntu ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7892592K/8268888K available (9281K kernel code, 2477K rwdata, 3992K rodata, 2324K init, 2384K bss, 376296K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 37719 entries in 148 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.000000] hpet clockevent registered [ 0.004000] tsc: Detected 2400.000 MHz processor [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=9600000) [ 0.004000] pid_max: default: 32768 minimum: 301 [ 0.004000] ACPI: Core revision 20170531 [ 0.037340] ACPI: 9 ACPI AML tables successfully acquired and loaded [ 0.037914] Security Framework initialized [ 0.037915] Yama: becoming mindful. [ 0.037933] AppArmor: AppArmor initialized [ 0.039219] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.039844] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.039868] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.039887] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.040125] CPU: Physical Processor ID: 0 [ 0.040126] CPU: Processor Core ID: 0 [ 0.040131] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.040131] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.040137] mce: CPU supports 8 MCE banks [ 0.040147] CPU0: Thermal monitoring enabled (TM1) [ 0.040163] process: using mwait in idle threads [ 0.040166] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.040167] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.040488] Freeing SMP alternatives memory: 36K [ 0.045481] smpboot: Max logical packages: 2 [ 0.045492] DMAR: Host address width 39 [ 0.045493] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.045501] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e [ 0.045502] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.045507] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.045508] DMAR: RMRR base: 0x000000b7f25000 end: 0x000000b7f44fff [ 0.045509] DMAR: RMRR base: 0x000000ba000000 end: 0x000000bc7fffff [ 0.045512] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.045513] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.045513] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.045514] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.046988] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.046989] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.051061] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.090805] TSC deadline timer enabled [ 0.090810] smpboot: CPU0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz (family: 0x6, model: 0x4e, stepping: 0x3) [ 0.090891] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.090923] ... version: 4 [ 0.090923] ... bit width: 48 [ 0.090924] ... generic registers: 4 [ 0.090924] ... value mask: 0000ffffffffffff [ 0.090925] ... max period: 00007fffffffffff [ 0.090926] ... fixed-purpose events: 3 [ 0.090926] ... event mask: 000000070000000f [ 0.090966] Hierarchical SRCU implementation. [ 0.091807] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.091820] smp: Bringing up secondary CPUs ... [ 0.091904] x86: Booting SMP configuration: [ 0.091906] .... node #0, CPUs: #1 #2 #3 [ 0.093955] smp: Brought up 1 node, 4 CPUs [ 0.093955] smpboot: Total of 4 processors activated (19200.00 BogoMIPS) [ 0.096331] devtmpfs: initialized [ 0.096331] x86/mm: Memory block size: 128MB [ 0.096634] evm: security.selinux [ 0.096635] evm: security.SMACK64 [ 0.096635] evm: security.SMACK64EXEC [ 0.096636] evm: security.SMACK64TRANSMUTE [ 0.096636] evm: security.SMACK64MMAP [ 0.096637] evm: security.ima [ 0.096637] evm: security.capability [ 0.096650] PM: Registering ACPI NVS region [mem 0xaa170000-0xaa170fff] (4096 bytes) [ 0.096650] PM: Registering ACPI NVS region [mem 0xb7f76000-0xb7fc5fff] (327680 bytes) [ 0.096650] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.096650] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.096650] pinctrl core: initialized pinctrl subsystem [ 0.096650] RTC time: 14:28:50, date: 10/25/17 [ 0.097608] NET: Registered protocol family 16 [ 0.097777] cpuidle: using governor ladder [ 0.097777] cpuidle: using governor menu [ 0.097777] PCCT header not found. [ 0.097777] Simple Boot Flag at 0x47 set to 0x1 [ 0.097777] ACPI: bus type PCI registered [ 0.097777] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.097777] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.097777] PCI: not using MMCONFIG [ 0.097777] PCI: Using configuration type 1 for base access [ 0.100355] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.100355] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.100356] ACPI: Added _OSI(Module Device) [ 0.100356] ACPI: Added _OSI(Processor Device) [ 0.100356] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.100356] ACPI: Added _OSI(Processor Aggregator Device) [ 0.100356] ACPI: Deleted _OSI(Windows 2012) [ 0.100356] ACPI: EC: EC started [ 0.100356] ACPI: EC: interrupt blocked [ 0.101461] ACPI: \: Used as first EC [ 0.101463] ACPI: \: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.101464] ACPI: \: Used as boot ECDT EC to handle transactions [ 0.107470] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.117208] ACPI: Dynamic OEM Table Load: [ 0.117259] ACPI: SSDT 0xFFFF94C53803F000 00068B (v02 PmRef Cpu0Ist 00003000 INTL 20141107) [ 0.117446] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked [ 0.118165] ACPI: Dynamic OEM Table Load: [ 0.118173] ACPI: SSDT 0xFFFF94C538070800 0003CF (v02 PmRef Cpu0Cst 00003001 INTL 20141107) [ 0.118394] ACPI: Dynamic OEM Table Load: [ 0.118399] ACPI: SSDT 0xFFFF94C538079300 00008E (v02 PmRef Cpu0Hwp 00003000 INTL 20141107) [ 0.118538] ACPI: Dynamic OEM Table Load: [ 0.118543] ACPI: SSDT 0xFFFF94C538095E00 000130 (v02 PmRef HwpLvt 00003000 INTL 20141107) [ 0.119143] ACPI: Dynamic OEM Table Load: [ 0.119155] ACPI: SSDT 0xFFFF94C53803B000 0005AA (v02 PmRef ApIst 00003000 INTL 20141107) [ 0.119542] ACPI: Dynamic OEM Table Load: [ 0.119548] ACPI: SSDT 0xFFFF94C538094E00 000119 (v02 PmRef ApHwp 00003000 INTL 20141107) [ 0.119764] ACPI: Dynamic OEM Table Load: [ 0.119770] ACPI: SSDT 0xFFFF94C538095A00 000119 (v02 PmRef ApCst 00003000 INTL 20141107) [ 0.120861] ACPI: Interpreter enabled [ 0.120913] ACPI: (supports S0 S3 S4 S5) [ 0.120914] ACPI: Using IOAPIC for interrupt routing [ 0.120936] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.121249] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.121255] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.121471] ACPI: Enabled 6 GPEs in block 00 to 7F [ 0.124330] ACPI: Power Resource [PUBS] (on) [ 0.125515] ACPI: Power Resource [PG00] (on) [ 0.125598] ACPI: Power Resource [PG01] (on) [ 0.125675] ACPI: Power Resource [PG02] (on) [ 0.127229] ACPI: Power Resource [WRST] (off) [ 0.127358] ACPI: Power Resource [WRST] (off) [ 0.152735] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.152873] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.153005] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.153136] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.153268] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.153398] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.153529] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.153660] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.153842] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.153850] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.154002] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability] [ 0.154067] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.154070] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability] [ 0.154072] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER] [ 0.154074] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 0.154429] PCI host bridge to bus 0000:00 [ 0.154433] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.154436] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.154438] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.154440] pci_bus 0000:00: root bus resource [mem 0xbc800000-0xfebfffff window] [ 0.154442] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.154457] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000 [ 0.154618] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000 [ 0.154638] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff 64bit] [ 0.154648] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.154656] pci 0000:00:02.0: reg 0x20: [io 0xe000-0xe03f] [ 0.154851] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000 [ 0.154872] pci 0000:00:08.0: reg 0x10: [mem 0xe1348000-0xe1348fff 64bit] [ 0.155050] pci 0000:00:13.0: [8086:9d35] type 00 class 0x000000 [ 0.155081] pci 0000:00:13.0: reg 0x10: [mem 0xe1349000-0xe1349fff 64bit] [ 0.155258] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 [ 0.155290] pci 0000:00:14.0: reg 0x10: [mem 0xe1320000-0xe132ffff 64bit] [ 0.155388] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.155680] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 [ 0.155711] pci 0000:00:14.2: reg 0x10: [mem 0xe134a000-0xe134afff 64bit] [ 0.155915] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 [ 0.155950] pci 0000:00:16.0: reg 0x10: [mem 0xe134b000-0xe134bfff 64bit] [ 0.156057] pci 0000:00:16.0: PME# supported from D3hot [ 0.156299] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400 [ 0.156412] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.156633] pci 0000:00:1c.2: [8086:9d12] type 01 class 0x060400 [ 0.156763] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.156934] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400 [ 0.157025] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.157210] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100 [ 0.157485] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 [ 0.157503] pci 0000:00:1f.2: reg 0x10: [mem 0xe1344000-0xe1347fff] [ 0.157703] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300 [ 0.157737] pci 0000:00:1f.3: reg 0x10: [mem 0xe1340000-0xe1343fff 64bit] [ 0.157776] pci 0000:00:1f.3: reg 0x20: [mem 0xe1330000-0xe133ffff 64bit] [ 0.157836] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.157999] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 [ 0.158057] pci 0000:00:1f.4: reg 0x10: [mem 0xe134c000-0xe134c0ff 64bit] [ 0.158110] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] [ 0.158329] pci 0000:00:1f.6: [8086:1570] type 00 class 0x020000 [ 0.158359] pci 0000:00:1f.6: reg 0x10: [mem 0xe1300000-0xe131ffff] [ 0.158473] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.158755] pci 0000:02:00.0: [10ec:525a] type 00 class 0xff0000 [ 0.158789] pci 0000:02:00.0: reg 0x14: [mem 0xe1200000-0xe1200fff] [ 0.158965] pci 0000:02:00.0: supports D1 D2 [ 0.158966] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.168130] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.168137] pci 0000:00:1c.0: bridge window [mem 0xe1200000-0xe12fffff] [ 0.168582] pci 0000:04:00.0: [8086:24f3] type 00 class 0x028000 [ 0.168687] pci 0000:04:00.0: reg 0x10: [mem 0xe1100000-0xe1101fff 64bit] [ 0.169222] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.180319] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.180325] pci 0000:00:1c.2: bridge window [mem 0xe1100000-0xe11fffff] [ 0.180492] pci 0000:05:00.0: [144d:a802] type 00 class 0x010802 [ 0.180527] pci 0000:05:00.0: reg 0x10: [mem 0xe1000000-0xe1003fff 64bit] [ 0.180539] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd0ff] [ 0.192127] pci 0000:00:1c.4: PCI bridge to [bus 05] [ 0.192131] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.192135] pci 0000:00:1c.4: bridge window [mem 0xe1000000-0xe10fffff] [ 0.194376] ACPI: EC: EC stopped [ 0.194377] ACPI: EC: EC started [ 0.194378] ACPI: EC: interrupt blocked [ 0.194735] ACPI: EC: interrupt unblocked [ 0.194758] ACPI: EC: event unblocked [ 0.194773] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.194776] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot ECDT EC to handle transactions and events [ 0.194807] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.194809] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events [ 0.195126] SCSI subsystem initialized [ 0.195150] libata version 3.00 loaded. [ 0.195150] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.195150] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.195150] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.195150] vgaarb: loaded [ 0.195150] ACPI: bus type USB registered [ 0.195150] usbcore: registered new interface driver usbfs [ 0.195150] usbcore: registered new interface driver hub [ 0.195150] usbcore: registered new device driver usb [ 0.195150] EDAC MC: Ver: 3.0.0 [ 0.195150] Registered efivars operations [ 0.225498] PCI: Using ACPI for IRQ routing [ 0.232373] PCI: pci_cache_line_size set to 64 bytes [ 0.233132] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.233133] e820: reserve RAM buffer [mem 0x0008c000-0x0008ffff] [ 0.233133] e820: reserve RAM buffer [mem 0xaa170000-0xabffffff] [ 0.233134] e820: reserve RAM buffer [mem 0xb63b6000-0xb7ffffff] [ 0.233135] e820: reserve RAM buffer [mem 0xb7fff000-0xb7ffffff] [ 0.233136] e820: reserve RAM buffer [mem 0x242800000-0x243ffffff] [ 0.233218] NetLabel: Initializing [ 0.233219] NetLabel: domain hash size = 128 [ 0.233219] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.233235] NetLabel: unlabeled traffic allowed by default [ 0.233245] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.233245] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.234149] clocksource: Switched to clocksource hpet [ 0.241047] VFS: Disk quotas dquot_6.6.0 [ 0.241063] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.241145] AppArmor: AppArmor Filesystem Enabled [ 0.241178] pnp: PnP ACPI init [ 0.241576] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.241577] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.241578] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.241579] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved [ 0.241580] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved [ 0.241581] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved [ 0.241582] system 00:00: [mem 0x000d4000-0x000d7fff] could not be reserved [ 0.241583] system 00:00: [mem 0x000d8000-0x000dbfff] could not be reserved [ 0.241584] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved [ 0.241585] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.241586] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.241587] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.241588] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.241589] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.241590] system 00:00: [mem 0x00100000-0xbc7fffff] could not be reserved [ 0.241591] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.241592] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.241596] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.241705] system 00:01: [io 0x1800-0x189f] has been reserved [ 0.241706] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.241707] system 00:01: [io 0x0880-0x08ff] has been reserved [ 0.241708] system 00:01: [io 0x0900-0x097f] has been reserved [ 0.241709] system 00:01: [io 0x0980-0x09ff] has been reserved [ 0.241710] system 00:01: [io 0x0a00-0x0a7f] has been reserved [ 0.241711] system 00:01: [io 0x0a80-0x0aff] has been reserved [ 0.241712] system 00:01: [io 0x0b00-0x0b7f] has been reserved [ 0.241713] system 00:01: [io 0x0b80-0x0bff] has been reserved [ 0.241714] system 00:01: [io 0x15e0-0x15ef] has been reserved [ 0.241715] system 00:01: [io 0x1600-0x167f] has been reserved [ 0.241716] system 00:01: [io 0x1640-0x165f] has been reserved [ 0.241718] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved [ 0.241719] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.241720] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.241721] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.241722] system 00:01: [mem 0xfeb00000-0xfebfffff] has been reserved [ 0.241723] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.241724] system 00:01: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.241726] system 00:01: [mem 0xf7fe0000-0xf7ffffff] has been reserved [ 0.241727] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.241782] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.241797] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active) [ 0.241809] pnp 00:04: Plug and Play ACPI device, IDs LEN0058 PNP0f13 (active) [ 0.241836] system 00:05: [io 0x1854-0x1857] has been reserved [ 0.241837] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.242403] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.242404] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.242405] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.242406] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.242407] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.242408] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.242409] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.242411] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.242676] system 00:07: [io 0xff00-0xfffe] has been reserved [ 0.242678] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.242763] pnp: PnP ACPI: found 8 devices [ 0.251139] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.251168] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.251174] pci 0000:00:1c.0: bridge window [mem 0xe1200000-0xe12fffff] [ 0.251180] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.251183] pci 0000:00:1c.2: bridge window [mem 0xe1100000-0xe11fffff] [ 0.251188] pci 0000:00:1c.4: PCI bridge to [bus 05] [ 0.251190] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.251193] pci 0000:00:1c.4: bridge window [mem 0xe1000000-0xe10fffff] [ 0.251200] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.251201] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.251202] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.251202] pci_bus 0000:00: resource 7 [mem 0xbc800000-0xfebfffff window] [ 0.251204] pci_bus 0000:02: resource 1 [mem 0xe1200000-0xe12fffff] [ 0.251205] pci_bus 0000:04: resource 1 [mem 0xe1100000-0xe11fffff] [ 0.251206] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 0.251206] pci_bus 0000:05: resource 1 [mem 0xe1000000-0xe10fffff] [ 0.251287] NET: Registered protocol family 2 [ 0.251430] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.251549] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.251690] TCP: Hash tables configured (established 65536 bind 65536) [ 0.251716] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.251740] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.251786] NET: Registered protocol family 1 [ 0.251814] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.252483] PCI: CLS 0 bytes, default 64 [ 0.252510] Unpacking initramfs... [ 0.945433] Freeing initrd memory: 52036K [ 0.945484] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.945487] software IO TLB [mem 0xaae28000-0xaee28000] (64MB) mapped at [ffff94c3aae28000-ffff94c3aee27fff] [ 0.945576] resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than pnp 00:01 [mem 0xfed10000-0xfed13fff] [ 0.945580] caller snb_uncore_imc_init_box+0x6c/0xb0 mapping multiple BARs [ 0.945714] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22983777dd9, max_idle_ns: 440795300422 ns [ 0.945877] Scanning for low memory corruption every 60 seconds [ 0.946257] audit: initializing netlink subsys (disabled) [ 0.946336] audit: type=2000 audit(1508941730.946:1): state=initialized audit_enabled=0 res=1 [ 0.946685] Initialise system trusted keyrings [ 0.946692] Key type blacklist registered [ 0.946772] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.947707] zbud: loaded [ 0.948091] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.948281] fuse init (API version 7.26) [ 0.951330] Key type asymmetric registered [ 0.951331] Asymmetric key parser 'x509' registered [ 0.951360] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.951420] io scheduler noop registered [ 0.951437] io scheduler deadline registered [ 0.951457] io scheduler cfq registered (default) [ 0.952069] efifb: probing for efifb [ 0.952077] efifb: framebuffer at 0xc0000000, using 14400k, total 14400k [ 0.952078] efifb: mode is 2560x1440x32, linelength=10240, pages=1 [ 0.952078] efifb: scrolling: redraw [ 0.952080] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.952194] Console: switching to colour frame buffer device 320x90 [ 0.952224] fb0: EFI VGA frame buffer device [ 0.952232] intel_idle: MWAIT substates: 0x11142120 [ 0.952233] intel_idle: v0.4.1 model 0x4E [ 0.952466] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.952749] ACPI: AC Adapter [AC] (on-line) [ 0.952999] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.953262] ACPI: Lid Switch [LID] [ 0.953289] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.953342] ACPI: Sleep Button [SLPB] [ 0.953386] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.953437] ACPI: Power Button [PWRF] [ 0.955283] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 0.955787] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.955788] ACPI: Thermal Zone [THM0] (45 C) [ 0.955811] GHES: HEST is not enabled! [ 0.955946] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.958980] Linux agpgart interface v0.103 [ 0.960773] loop: module loaded [ 0.960904] libphy: Fixed MDIO Bus: probed [ 0.960905] tun: Universal TUN/TAP device driver, 1.6 [ 0.960953] PPP generic driver version 2.4.2 [ 0.961005] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.961007] ehci-pci: EHCI PCI platform driver [ 0.961014] ehci-platform: EHCI generic platform driver [ 0.961021] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.961022] ohci-pci: OHCI PCI platform driver [ 0.961028] ohci-platform: OHCI generic platform driver [ 0.961032] uhci_hcd: USB Universal Host Controller Interface driver [ 0.961201] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.961205] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.962455] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810 [ 0.962460] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.962582] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.962583] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.962584] usb usb1: Product: xHCI Host Controller [ 0.962585] usb usb1: Manufacturer: Linux 4.13.0-16-generic xhci-hcd [ 0.962585] usb usb1: SerialNumber: 0000:00:14.0 [ 0.962706] hub 1-0:1.0: USB hub found [ 0.962732] hub 1-0:1.0: 12 ports detected [ 0.963483] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.963485] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.963521] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.963522] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.963523] usb usb2: Product: xHCI Host Controller [ 0.963524] usb usb2: Manufacturer: Linux 4.13.0-16-generic xhci-hcd [ 0.963525] usb usb2: SerialNumber: 0000:00:14.0 [ 0.963619] hub 2-0:1.0: USB hub found [ 0.963637] hub 2-0:1.0: 6 ports detected [ 0.963880] usb: port power management may be unreliable [ 0.964396] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.967740] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.967748] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.967983] mousedev: PS/2 mouse device common for all mice [ 0.968354] rtc_cmos 00:02: RTC can wake from S4 [ 0.969011] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.969141] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.969145] i2c /dev entries driver [ 0.969235] device-mapper: uevent: version 1.0.3 [ 0.969326] device-mapper: ioctl: 4.36.0-ioctl (2017-06-09) initialised: dm-devel@redhat.com [ 0.969329] intel_pstate: Intel P-state driver initializing [ 0.970059] intel_pstate: HWP enabled [ 0.970272] ledtrig-cpu: registered to indicate activity on CPUs [ 0.970274] EFI Variables Facility v0.08 2004-May-17 [ 0.971863] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.988320] ACPI: Battery Slot [BAT0] (battery present) [ 1.004643] intel_pmc_core 0000:00:1f.2: enabling device (0000 -> 0002) [ 1.004846] NET: Registered protocol family 10 [ 1.008905] Segment Routing with IPv6 [ 1.008925] NET: Registered protocol family 17 [ 1.008932] Key type dns_resolver registered [ 1.009764] RAS: Correctable Errors collector initialized. [ 1.009787] microcode: sig=0x406e3, pf=0x80, revision=0xba [ 1.010136] microcode: Microcode Update Driver: v2.2. [ 1.010144] sched_clock: Marking stable (1010133449, 0)->(1016328153, -6194704) [ 1.010576] registered taskstats version 1 [ 1.010584] Loading compiled-in X.509 certificates [ 1.012434] Loaded X.509 cert 'Build time autogenerated kernel key: 04409fd30ffab3ce9d2178c508b3c866d61d9a62' [ 1.013133] Loaded UEFI:db cert 'Lenovo Ltd.: ThinkPad Product CA 2012: 838b1f54c1550463f45f98700640f11069265949' linked to secondary sys keyring [ 1.013173] Loaded UEFI:db cert 'Lenovo UEFI CA 2014: 4b91a68732eaefdd2c8ffffc6b027ec3449e9c8f' linked to secondary sys keyring [ 1.013187] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring [ 1.013202] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring [ 1.015286] Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring [ 1.015827] zswap: loaded using pool lzo/zbud [ 1.017362] Key type big_key registered [ 1.017364] Key type trusted registered [ 1.018504] Key type encrypted registered [ 1.018506] AppArmor: AppArmor sha1 policy hashing enabled [ 1.018508] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.018523] evm: HMAC attrs: 0x1 [ 1.019731] Magic number: 5:315:486 [ 1.019948] rtc_cmos 00:02: setting system clock to 2017-10-25 14:28:51 UTC (1508941731) [ 1.020021] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.020022] EDD information not available. [ 1.020057] PM: Hibernation image not present or could not be loaded. [ 1.021763] Freeing unused kernel memory: 2324K [ 1.021764] Write protecting the kernel read-only data: 14336k [ 1.022048] Freeing unused kernel memory: 948K [ 1.022254] Freeing unused kernel memory: 104K [ 1.023564] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.084052] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 1.084132] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 1.084202] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 1.088147] intel_ish_ipc 0000:00:13.0: enabling device (0000 -> 0002) [ 1.089616] rtsx_pci 0000:02:00.0: enabling device (0000 -> 0002) [ 1.116500] nvme nvme0: pci function 0000:05:00.0 [ 1.120230] pps_core: LinuxPPS API ver. 1 registered [ 1.120232] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.121772] PTP clock support registered [ 1.126860] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.126861] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.130282] AVX2 version of gcm_enc/dec engaged. [ 1.130283] AES CTR mode by8 optimization enabled [ 1.248447] nvme0n1: p1 p2 p3 p4 p5 p6 [ 1.288330] usb 1-1: new low-speed USB device number 2 using xhci_hcd [ 1.435537] usb 1-1: New USB device found, idVendor=045e, idProduct=0039 [ 1.435539] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 1.435540] usb 1-1: Product: Microsoft 5-Button Mouse with IntelliEye(TM) [ 1.435541] usb 1-1: Manufacturer: Microsoft [ 1.438824] hidraw: raw HID events driver (C) Jiri Kosina [ 1.442115] usbcore: registered new interface driver usbhid [ 1.442116] usbhid: USB HID core driver [ 1.443396] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:045E:0039.0001/input/input6 [ 1.443575] hid-generic 0003:045E:0039.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:14.0-1/input0 [ 1.556709] usb 1-7: new full-speed USB device number 3 using xhci_hcd [ 1.693600] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.696818] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=2 [ 1.697668] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b [ 1.697669] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.816151] usb 1-8: new high-speed USB device number 4 using xhci_hcd [ 1.905061] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 1.954021] clocksource: Switched to clocksource tsc [ 1.966748] psmouse serio1: synaptics: queried max coordinates: x [..5678], y [..4754] [ 1.976931] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 54:ee:75:a5:7c:23 [ 1.976933] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 1.977026] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: 1000FF-0FF [ 1.977788] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0 [ 1.979860] [drm] Memory usable by graphics device = 4096M [ 1.979862] checking generic (c0000000 e10000) vs hw (c0000000 20000000) [ 1.979862] fb: switching to inteldrmfb from EFI VGA [ 1.979886] Console: switching to colour dummy device 80x25 [ 1.979965] [drm] Replacing VGA console driver [ 1.986866] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.986867] [drm] Driver supports precise vblank timestamp query. [ 1.989027] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.989190] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_26.bin (v1.26) [ 1.995697] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0 [ 1.997571] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.997799] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 1.999529] psmouse serio1: synaptics: queried min coordinates: x [1262..], y [1098..] [ 1.999533] psmouse serio1: synaptics: Your touchpad (PNP: LEN0058 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org. [ 2.004757] usb 1-8: New USB device found, idVendor=04f2, idProduct=b531 [ 2.004776] usb 1-8: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.004777] usb 1-8: Product: Integrated Camera [ 2.004779] usb 1-8: Manufacturer: Chicony Electronics Co.,Ltd. [ 2.004779] usb 1-8: SerialNumber: 0001 [ 2.042348] fbcon: inteldrmfb (fb0) is primary device [ 2.042465] Console: switching to colour frame buffer device 320x90 [ 2.042521] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.063369] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf002a3/0x940300/0x12e800/0x0, board id: 3144, fw id: 2059155 [ 2.063390] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 2.099475] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 2.184059] usb 1-9: new full-speed USB device number 5 using xhci_hcd [ 2.327162] usb 1-9: New USB device found, idVendor=138a, idProduct=0090 [ 2.327164] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 2.327180] usb 1-9: SerialNumber: 0ded84d91451 [ 2.781257] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 3.027948] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input8 [ 3.572285] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [ 3.804311] [drm] RC6 on [ 8.691428] random: crng init done [ 12.212020] NET: Registered protocol family 38 [ 12.619108] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 12.722347] ip_tables: (C) 2000-2006 Netfilter Core Team [ 12.788918] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid) [ 12.789037] systemd[1]: Detected architecture x86-64. [ 12.789159] systemd[1]: Set hostname to . [ 12.868411] systemd[1]: Unnecessary job for dev-mapper-lvm.device was removed. [ 12.868618] systemd[1]: Listening on Syslog Socket. [ 12.868683] systemd[1]: Listening on LVM2 poll daemon socket. [ 12.868706] systemd[1]: Listening on udev Kernel Socket. [ 12.868713] systemd[1]: Reached target User and Group Name Lookups. [ 12.868745] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 12.868875] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 12.887502] lp: driver loaded but no devices found [ 12.890036] ppdev: user-space parallel port driver [ 12.900094] RPC: Registered named UNIX socket transport module. [ 12.900096] RPC: Registered udp transport module. [ 12.900097] RPC: Registered tcp transport module. [ 12.900097] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 12.957030] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 12.974337] systemd-journald[405]: Received request to flush runtime journal from PID 1 [ 13.006069] Adding 970056k swap on /swapfile. Priority:-1 extents:4 across:994632k SSFS [ 13.192453] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 13.192718] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 13.197724] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 13.208630] Non-volatile memory driver v1.3 [ 13.213915] thinkpad_acpi: ThinkPad ACPI Extras v0.25 [ 13.213916] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 13.213917] thinkpad_acpi: ThinkPad BIOS N1FET40W (1.14 ), EC unknown [ 13.213918] thinkpad_acpi: Lenovo ThinkPad X1 Carbon 4th, model 20FBCTO1WW [ 13.216146] thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 13.217060] thinkpad_acpi: radio switch found; radios are enabled [ 13.217178] thinkpad_acpi: Tablet mode switch found (type: CMMD), currently in laptop mode [ 13.217193] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 13.217193] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 13.219457] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 13.223639] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 13.227669] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9 [ 13.231859] Intel(R) Wireless WiFi driver for Linux [ 13.231861] Copyright(c) 2003- 2015 Intel Corporation [ 13.232420] iwlwifi 0000:04:00.0: enabling device (0000 -> 0002) [ 13.235645] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-33.ucode failed with error -2 [ 13.235668] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-32.ucode failed with error -2 [ 13.240865] iwlwifi 0000:04:00.0: loaded firmware version 31.532993.0 op_mode iwlmvm [ 13.252102] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 13.264569] acer_wmi: Acer Laptop ACPI-WMI Extras [ 13.264575] acer_wmi: Unsupported machine has AMW0_GUID1, unable to load [ 13.272942] iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208 [ 13.285722] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 13.285723] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 13.285724] RAPL PMU: hw unit of domain package 2^-14 Joules [ 13.285725] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 13.285726] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 13.285727] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 13.291609] snd_hda_codec_conexant hdaudioC0D0: CX20753/4: BIOS auto-probing. [ 13.292389] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20753/4: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker [ 13.292391] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 13.292393] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0) [ 13.292394] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0 [ 13.292395] snd_hda_codec_conexant hdaudioC0D0: inputs: [ 13.292397] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1a [ 13.292398] snd_hda_codec_conexant hdaudioC0D0: Mic=0x19 [ 13.293166] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication [ 13.335269] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10 [ 13.335309] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11 [ 13.335343] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 [ 13.335376] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13 [ 13.335489] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 [ 13.335520] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 13.335551] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 [ 13.355017] iwlwifi 0000:04:00.0: base HW address: e4:a4:71:4f:31:75 [ 13.374645] intel_rapl: Found RAPL domain package [ 13.374647] intel_rapl: Found RAPL domain core [ 13.374648] intel_rapl: Found RAPL domain uncore [ 13.374649] intel_rapl: Found RAPL domain dram [ 13.434930] EXT4-fs (nvme0n1p6): mounting ext3 file system using the ext4 subsystem [ 13.437784] EXT4-fs (nvme0n1p6): mounted filesystem with ordered data mode. Opts: (null) [ 13.438472] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 13.438755] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 13.438772] thermal thermal_zone3: failed to read out thermal zone (-5) [ 13.513783] EXT4-fs (dm-2): 1 orphan inode deleted [ 13.513784] EXT4-fs (dm-2): recovery complete [ 13.532899] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 13.565691] iwlwifi 0000:04:00.0 wlp4s0: renamed from wlan0 [ 13.654479] audit: type=1400 audit(1508941744.134:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-clipboard" pid=827 comm="apparmor_parser" [ 13.655202] audit: type=1400 audit(1508941744.135:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-peer-picker" pid=828 comm="apparmor_parser" [ 13.655215] audit: type=1400 audit(1508941744.135:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=829 comm="apparmor_parser" [ 13.657722] audit: type=1400 audit(1508941744.137:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3017/usr/lib/snapd/snap-confine" pid=832 comm="apparmor_parser" [ 13.657725] audit: type=1400 audit(1508941744.137:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3017/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=832 comm="apparmor_parser" [ 13.658230] audit: type=1400 audit(1508941744.138:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3247/usr/lib/snapd/snap-confine" pid=833 comm="apparmor_parser" [ 13.658233] audit: type=1400 audit(1508941744.138:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3247/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=833 comm="apparmor_parser" [ 13.659786] audit: type=1400 audit(1508941744.139:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=830 comm="apparmor_parser" [ 13.659789] audit: type=1400 audit(1508941744.139:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=830 comm="apparmor_parser" [ 13.660936] audit: type=1400 audit(1508941744.141:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="url-dispatcher-bad-url-helper" pid=834 comm="apparmor_parser" [ 14.263885] media: Linux media interface: v0.10 [ 14.273757] Linux video capture interface: v2.00 [ 14.276754] Bluetooth: Core ver 2.22 [ 14.278174] NET: Registered protocol family 31 [ 14.278176] Bluetooth: HCI device and connection manager initialized [ 14.278179] Bluetooth: HCI socket layer initialized [ 14.278182] Bluetooth: L2CAP socket layer initialized [ 14.278190] Bluetooth: SCO socket layer initialized [ 14.299268] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 14.437790] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b531) [ 14.440345] uvcvideo: Failed to initialize entity for entity 6 [ 14.440346] uvcvideo: Failed to register entites (-22). [ 14.440439] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input17 [ 14.440521] usbcore: registered new interface driver uvcvideo [ 14.440522] USB Video Class driver (1.1.1) [ 14.448293] usbcore: registered new interface driver btusb [ 14.448649] Bluetooth: hci0: Firmware revision 0.0 build 118 week 50 2016 [ 14.492180] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 14.496505] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 14.519663] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 14.519665] Bluetooth: BNEP filters: protocol multicast [ 14.519667] Bluetooth: BNEP socket layer initialized [ 14.744764] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 14.853715] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 20.087742] acpi_call: loading out-of-tree module taints kernel. [ 20.087780] acpi_call: module verification failed: signature and/or required key missing - tainting kernel [ 53.334859] wlp4s0: authenticate with d8:50:e6:cb:b4:60 [ 53.571078] wlp4s0: send auth to d8:50:e6:cb:b4:60 (try 1/3) [ 53.580717] wlp4s0: authenticated [ 53.584026] wlp4s0: associate with d8:50:e6:cb:b4:60 (try 1/3) [ 53.587899] wlp4s0: RX AssocResp from d8:50:e6:cb:b4:60 (capab=0x411 status=0 aid=1) [ 53.591604] wlp4s0: associated [ 53.591669] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 54.710719] Bluetooth: RFCOMM TTY layer initialized [ 54.710724] Bluetooth: RFCOMM socket layer initialized [ 54.710728] Bluetooth: RFCOMM ver 1.11 [ 54.944311] usb 1-7: reset full-speed USB device number 3 using xhci_hcd [ 55.072089] usb 1-7: device descriptor read/64, error -71 [ 55.304080] usb 1-7: device descriptor read/64, error -71 [ 55.532031] usb 1-7: reset full-speed USB device number 3 using xhci_hcd [ 55.652027] usb 1-7: device descriptor read/64, error -71 [ 55.884038] usb 1-7: device descriptor read/64, error -71 [ 56.112040] usb 1-7: reset full-speed USB device number 3 using xhci_hcd [ 56.112137] usb 1-7: Device not responding to setup address. [ 56.324158] usb 1-7: Device not responding to setup address. [ 56.376956] rfkill: input handler disabled [ 56.532032] usb 1-7: device not accepting address 3, error -71 [ 56.652028] usb 1-7: reset full-speed USB device number 3 using xhci_hcd [ 56.652124] usb 1-7: Device not responding to setup address. [ 56.732027] Bluetooth: hci0 command 0x0c24 tx timeout [ 56.860112] usb 1-7: Device not responding to setup address. [ 57.072032] usb 1-7: device not accepting address 3, error -71 [ 57.072071] usb 1-7: USB disconnect, device number 3 [ 57.192029] usb 1-7: new full-speed USB device number 6 using xhci_hcd [ 57.312055] usb 1-7: device descriptor read/64, error -71 [ 57.544032] usb 1-7: device descriptor read/64, error -71 [ 57.776013] usb 1-7: new full-speed USB device number 7 using xhci_hcd [ 57.900035] usb 1-7: device descriptor read/64, error -71 [ 58.128030] usb 1-7: device descriptor read/64, error -71 [ 58.356016] usb 1-7: new full-speed USB device number 8 using xhci_hcd [ 58.356118] usb 1-7: Device not responding to setup address. [ 58.564114] usb 1-7: Device not responding to setup address. [ 58.772018] usb 1-7: device not accepting address 8, error -71 [ 58.892028] usb 1-7: new full-speed USB device number 9 using xhci_hcd [ 58.892131] usb 1-7: Device not responding to setup address. [ 59.100122] usb 1-7: Device not responding to setup address. [ 59.308026] usb 1-7: device not accepting address 9, error -71 [ 59.308065] usb usb1-port7: unable to enumerate USB device [ 59.700033] usb 1-7: new full-speed USB device number 10 using xhci_hcd [ 59.840854] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b [ 59.840857] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 59.846626] Bluetooth: hci0: Firmware revision 0.0 build 118 week 50 2016 [ 624.422980] e1000e: enp0s31f6 NIC Link is Down [ 624.468704] wlp4s0: deauthenticating from d8:50:e6:cb:b4:60 by local choice (Reason: 3=DEAUTH_LEAVING) [ 624.478556] wlp4s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22) [ 628.279986] PM: Syncing filesystems ... done. [ 628.290070] PM: Preparing system for sleep (mem) [ 628.290633] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 628.292637] OOM killer disabled. [ 628.292638] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 628.293965] PM: Suspending system (mem) [ 628.294000] Suspending console(s) (use no_console_suspend to debug) [ 628.473023] e1000e: EEE TX LPI TIMER: 00000011 [ 628.710410] PM: suspend of devices complete after 416.154 msecs [ 628.729520] PM: late suspend of devices complete after 19.101 msecs [ 628.785545] PM: noirq suspend of devices complete after 56.003 msecs [ 628.785777] ACPI: Preparing to enter system sleep state S3 [ 629.073680] ACPI: EC: event blocked [ 629.073680] ACPI: EC: EC stopped [ 629.073680] PM: Saving platform NVS memory [ 629.073684] Disabling non-boot CPUs ... [ 629.091043] smpboot: CPU 1 is now offline [ 629.113982] IRQ 122: no longer affine to CPU2 [ 629.113988] IRQ 129: no longer affine to CPU2 [ 629.115225] smpboot: CPU 2 is now offline [ 629.141890] IRQ 1: no longer affine to CPU3 [ 629.141893] IRQ 8: no longer affine to CPU3 [ 629.141895] IRQ 9: no longer affine to CPU3 [ 629.141897] IRQ 12: no longer affine to CPU3 [ 629.141900] IRQ 20: no longer affine to CPU3 [ 629.141910] IRQ 133: no longer affine to CPU3 [ 629.142913] smpboot: CPU 3 is now offline [ 629.146602] ACPI: Low-level resume complete [ 629.146717] ACPI: EC: EC started [ 629.146717] PM: Restoring platform NVS memory [ 629.147435] Suspended for 1723.593 seconds [ 629.148656] Enabling non-boot CPUs ... [ 629.148760] x86: Booting SMP configuration: [ 629.148760] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 629.150468] cache: parent cpu1 should not be sleeping [ 629.150724] CPU1 is up [ 629.150748] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 629.152546] cache: parent cpu2 should not be sleeping [ 629.152880] CPU2 is up [ 629.152908] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 629.154621] cache: parent cpu3 should not be sleeping [ 629.155206] CPU3 is up [ 629.158414] ACPI: Waking up from system sleep state S3 [ 629.809099] PM: noirq resume of devices complete after 56.072 msecs [ 629.816520] PM: early resume of devices complete after 7.396 msecs [ 629.817675] ACPI: EC: event unblocked [ 629.882723] xhci_hcd 0000:00:14.0: port 8 resume PLC timeout [ 629.900635] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout [ 629.918662] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [ 630.158200] usb 1-9: reset full-speed USB device number 5 using xhci_hcd [ 630.418291] usb 1-7: reset full-speed USB device number 10 using xhci_hcd [ 630.566275] thinkpad_acpi: EC reports that Thermal Table has changed [ 630.674451] thinkpad_acpi: EC reports that Thermal Table has changed [ 630.677671] usb 1-8: reset high-speed USB device number 4 using xhci_hcd [ 630.682637] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=2 [ 630.716320] psmouse serio1: synaptics: queried max coordinates: x [..5678], y [..4754] [ 630.755492] psmouse serio1: synaptics: queried min coordinates: x [1262..], y [1098..] [ 630.886455] PM: resume of devices complete after 1069.572 msecs [ 630.886527] usb 1-7:1.0: rebind failed: -517 [ 630.886529] usb 1-7:1.1: rebind failed: -517 [ 630.887075] PM: Finishing wakeup. [ 630.887076] OOM killer enabled. [ 630.887077] Restarting tasks ... [ 630.887741] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014 [ 630.888827] [drm] RC6 on [ 630.892404] done. [ 630.894561] Bluetooth: hci0: Device revision is 5 [ 630.894562] Bluetooth: hci0: Secure boot is enabled [ 630.894563] Bluetooth: hci0: OTP lock is enabled [ 630.894564] Bluetooth: hci0: API lock is enabled [ 630.894565] Bluetooth: hci0: Debug lock is disabled [ 630.894566] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 630.897156] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi [ 630.902816] thermal thermal_zone3: failed to read out thermal zone (-5) [ 630.943129] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 631.009908] e1000e 0000:00:1f.6: Failed to restore TIMINCA clock rate delta: -22 [ 631.129478] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 631.130405] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 631.313525] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [ 631.384882] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 631.450309] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 632.447860] Bluetooth: hci0: Waiting for firmware download to complete [ 632.448424] Bluetooth: hci0: Firmware loaded in 1524382 usecs [ 632.448582] Bluetooth: hci0: Waiting for device to boot [ 632.459624] Bluetooth: hci0: Device booted in 10843 usecs [ 632.462166] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc [ 632.466438] Bluetooth: hci0: Applying Intel DDC parameters completed [ 633.274221] hid-sensor-hub 001F:8086:22D8.0002: timeout waiting for response from ISHTP device [ 635.589395] wlp4s0: authenticate with d8:50:e6:cb:b4:60 [ 635.600610] wlp4s0: send auth to d8:50:e6:cb:b4:60 (try 1/3) [ 635.614123] wlp4s0: authenticated [ 635.614714] wlp4s0: associate with d8:50:e6:cb:b4:60 (try 1/3) [ 635.638477] wlp4s0: RX AssocResp from d8:50:e6:cb:b4:60 (capab=0x411 status=0 aid=1) [ 635.640921] wlp4s0: associated [ 635.640972] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 1178.584321] kauditd_printk_skb: 78 callbacks suppressed [ 1178.584323] audit: type=1400 audit(1508944633.108:90): apparmor="DENIED" operation="open" profile="/usr/bin/evince" name="/var/lib/snapd/desktop/applications/mimeinfo.cache" pid=7458 comm="evince" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 1178.584366] audit: type=1400 audit(1508944633.108:91): apparmor="DENIED" operation="open" profile="/usr/bin/evince" name="/var/lib/snapd/desktop/applications/mimeinfo.cache" pid=7458 comm="evince" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 1763.093320] e1000e: enp0s31f6 NIC Link is Down [ 1763.150030] wlp4s0: deauthenticating from d8:50:e6:cb:b4:60 by local choice (Reason: 3=DEAUTH_LEAVING) [ 1763.167780] wlp4s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22) [ 1767.189574] usb 1-1: USB disconnect, device number 2 [ 1767.277760] PM: Syncing filesystems ... done. [ 1767.326442] PM: Preparing system for sleep (mem) [ 1767.327244] Freezing user space processes ... [ 1767.613682] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [ 1767.635655] (elapsed 0.308 seconds) done. [ 1767.635659] OOM killer disabled. [ 1767.635660] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 1767.637345] PM: Suspending system (mem) [ 1767.637401] Suspending console(s) (use no_console_suspend to debug) [ 1767.845688] e1000e: EEE TX LPI TIMER: 00000011 [ 1767.870199] thinkpad_acpi: EC reports that Thermal Table has changed [ 1768.218959] PM: suspend of devices complete after 581.442 msecs [ 1768.237547] PM: late suspend of devices complete after 18.585 msecs [ 1768.293539] PM: noirq suspend of devices complete after 55.993 msecs [ 1768.293852] ACPI: Preparing to enter system sleep state S3 [ 1768.581553] ACPI: EC: event blocked [ 1768.581553] ACPI: EC: EC stopped [ 1768.581554] PM: Saving platform NVS memory [ 1768.581559] Disabling non-boot CPUs ... [ 1768.606078] IRQ 133: no longer affine to CPU1 [ 1768.607088] smpboot: CPU 1 is now offline [ 1768.637979] IRQ 122: no longer affine to CPU2 [ 1768.637983] IRQ 129: no longer affine to CPU2 [ 1768.639310] smpboot: CPU 2 is now offline [ 1768.661822] IRQ 1: no longer affine to CPU3 [ 1768.661825] IRQ 8: no longer affine to CPU3 [ 1768.661827] IRQ 9: no longer affine to CPU3 [ 1768.661829] IRQ 12: no longer affine to CPU3 [ 1768.661832] IRQ 20: no longer affine to CPU3 [ 1768.662844] smpboot: CPU 3 is now offline [ 1768.666284] ACPI: Low-level resume complete [ 1768.666399] ACPI: EC: EC started [ 1768.666399] PM: Restoring platform NVS memory [ 1768.667116] Suspended for 64.780 seconds [ 1768.668326] Enabling non-boot CPUs ... [ 1768.668389] x86: Booting SMP configuration: [ 1768.668390] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 1768.670097] cache: parent cpu1 should not be sleeping [ 1768.670402] CPU1 is up [ 1768.670428] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 1768.672217] cache: parent cpu2 should not be sleeping [ 1768.672577] CPU2 is up [ 1768.672604] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 1768.674243] cache: parent cpu3 should not be sleeping [ 1768.674894] CPU3 is up [ 1768.678118] ACPI: Waking up from system sleep state S3 [ 1769.328648] PM: noirq resume of devices complete after 56.021 msecs [ 1769.336017] PM: early resume of devices complete after 7.341 msecs [ 1769.336834] ACPI: EC: event unblocked [ 1769.402802] xhci_hcd 0000:00:14.0: port 8 resume PLC timeout [ 1769.421286] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout [ 1769.439574] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [ 1769.676968] usb 1-8: reset high-speed USB device number 4 using xhci_hcd [ 1769.752632] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [ 1769.937211] usb 1-9: reset full-speed USB device number 5 using xhci_hcd [ 1770.087680] psmouse serio1: synaptics: queried max coordinates: x [..5678], y [..4754] [ 1770.126271] psmouse serio1: synaptics: queried min coordinates: x [1262..], y [1098..] [ 1770.134417] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=2 [ 1770.197239] usb 1-7: reset full-speed USB device number 10 using xhci_hcd [ 1770.339197] PM: resume of devices complete after 1003.235 msecs [ 1770.339267] usb 1-7:1.0: rebind failed: -517 [ 1770.339269] usb 1-7:1.1: rebind failed: -517 [ 1770.339910] PM: Finishing wakeup. [ 1770.339912] OOM killer enabled. [ 1770.339912] Restarting tasks ... [ 1770.340419] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014 [ 1770.347410] Bluetooth: hci0: Device revision is 5 [ 1770.347412] Bluetooth: hci0: Secure boot is enabled [ 1770.347413] Bluetooth: hci0: OTP lock is enabled [ 1770.347414] Bluetooth: hci0: API lock is enabled [ 1770.347415] Bluetooth: hci0: Debug lock is disabled [ 1770.347417] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 1770.347421] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi [ 1770.375977] done. [ 1770.377412] thermal thermal_zone3: failed to read out thermal zone (-5) [ 1770.465710] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 1770.656591] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 1770.657695] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 1770.907698] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 1770.972961] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 1771.028676] [drm] RC6 on [ 1771.788341] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [ 1771.988232] Bluetooth: hci0: Waiting for firmware download to complete [ 1771.988370] Bluetooth: hci0: Firmware loaded in 1609999 usecs [ 1771.988417] Bluetooth: hci0: Waiting for device to boot [ 1771.999412] Bluetooth: hci0: Device booted in 10772 usecs [ 1771.999417] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc [ 1772.003402] Bluetooth: hci0: Applying Intel DDC parameters completed [ 1772.436307] hid-sensor-hub 001F:8086:22D8.0002: timeout waiting for response from ISHTP device [ 1775.573363] wlp4s0: authenticate with d8:50:e6:cb:b4:60 [ 1775.582625] wlp4s0: send auth to d8:50:e6:cb:b4:60 (try 1/3) [ 1775.591368] wlp4s0: authenticated [ 1775.592089] wlp4s0: associate with d8:50:e6:cb:b4:60 (try 1/3) [ 1775.596093] wlp4s0: RX AssocResp from d8:50:e6:cb:b4:60 (capab=0x411 status=0 aid=1) [ 1775.598269] wlp4s0: associated [ 1775.598319] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 1916.715312] e1000e: enp0s31f6 NIC Link is Down [ 1916.804811] wlp4s0: deauthenticating from d8:50:e6:cb:b4:60 by local choice (Reason: 3=DEAUTH_LEAVING) [ 1916.814109] wlp4s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22) [ 1921.309920] PM: Syncing filesystems ... done. [ 1921.325032] PM: Preparing system for sleep (mem) [ 1921.325716] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 1921.328014] OOM killer disabled. [ 1921.328014] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 1921.329533] PM: Suspending system (mem) [ 1921.329567] Suspending console(s) (use no_console_suspend to debug) [ 1921.533575] e1000e: EEE TX LPI TIMER: 00000011 [ 1921.777194] PM: suspend of devices complete after 447.513 msecs [ 1921.795573] PM: late suspend of devices complete after 18.359 msecs [ 1921.851503] PM: noirq suspend of devices complete after 55.924 msecs [ 1921.851787] ACPI: Preparing to enter system sleep state S3 [ 1922.139500] ACPI: EC: event blocked [ 1922.139521] ACPI: EC: EC stopped [ 1922.139521] PM: Saving platform NVS memory [ 1922.139526] Disabling non-boot CPUs ... [ 1922.156924] smpboot: CPU 1 is now offline [ 1922.179857] IRQ 122: no longer affine to CPU2 [ 1922.179861] IRQ 129: no longer affine to CPU2 [ 1922.181122] smpboot: CPU 2 is now offline [ 1922.195753] IRQ 1: no longer affine to CPU3 [ 1922.195756] IRQ 8: no longer affine to CPU3 [ 1922.195759] IRQ 9: no longer affine to CPU3 [ 1922.195761] IRQ 12: no longer affine to CPU3 [ 1922.195764] IRQ 20: no longer affine to CPU3 [ 1922.195772] IRQ 133: no longer affine to CPU3 [ 1922.196772] smpboot: CPU 3 is now offline [ 1922.199813] ACPI: Low-level resume complete [ 1922.199928] ACPI: EC: EC started [ 1922.199929] PM: Restoring platform NVS memory [ 1922.200647] Suspended for 4.460 seconds [ 1922.201847] Enabling non-boot CPUs ... [ 1922.201927] x86: Booting SMP configuration: [ 1922.201928] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 1922.203653] cache: parent cpu1 should not be sleeping [ 1922.203908] CPU1 is up [ 1922.203980] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 1922.205782] cache: parent cpu2 should not be sleeping [ 1922.206101] CPU2 is up [ 1922.206130] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 1922.207934] cache: parent cpu3 should not be sleeping [ 1922.208498] CPU3 is up [ 1922.211728] ACPI: Waking up from system sleep state S3 [ 1922.858508] PM: noirq resume of devices complete after 55.996 msecs [ 1922.865904] PM: early resume of devices complete after 7.375 msecs [ 1922.866371] ACPI: EC: event unblocked [ 1922.932067] xhci_hcd 0000:00:14.0: port 8 resume PLC timeout [ 1922.949844] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout [ 1922.967265] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [ 1923.207858] usb 1-7: reset full-speed USB device number 10 using xhci_hcd [ 1923.467052] usb 1-8: reset high-speed USB device number 4 using xhci_hcd [ 1923.632728] psmouse serio1: synaptics: queried max coordinates: x [..5678], y [..4754] [ 1923.670499] psmouse serio1: synaptics: queried min coordinates: x [1262..], y [1098..] [ 1923.695947] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=2 [ 1923.727056] usb 1-9: reset full-speed USB device number 5 using xhci_hcd [ 1923.869197] PM: resume of devices complete after 1003.346 msecs [ 1923.869340] usb 1-7:1.0: rebind failed: -517 [ 1923.869359] usb 1-7:1.1: rebind failed: -517 [ 1923.870087] PM: Finishing wakeup. [ 1923.870088] OOM killer enabled. [ 1923.870088] Restarting tasks ... [ 1923.871062] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014 [ 1923.875186] [drm] RC6 on [ 1923.877778] Bluetooth: hci0: Device revision is 5 [ 1923.877782] Bluetooth: hci0: Secure boot is enabled [ 1923.877783] Bluetooth: hci0: OTP lock is enabled [ 1923.877784] Bluetooth: hci0: API lock is enabled [ 1923.877784] Bluetooth: hci0: Debug lock is disabled [ 1923.877786] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 1923.878127] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi [ 1923.885518] done. [ 1923.886627] thermal thermal_zone3: failed to read out thermal zone (-5) [ 1923.927792] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 1924.114517] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 1924.116127] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 1924.290236] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [ 1924.362236] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 1924.427929] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 1925.460599] Bluetooth: hci0: Waiting for firmware download to complete [ 1925.460734] Bluetooth: hci0: Firmware loaded in 1553857 usecs [ 1925.460789] Bluetooth: hci0: Waiting for device to boot [ 1925.471901] Bluetooth: hci0: Device booted in 10846 usecs [ 1925.471996] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc [ 1925.475903] Bluetooth: hci0: Applying Intel DDC parameters completed [ 1926.030220] hid-sensor-hub 001F:8086:22D8.0002: timeout waiting for response from ISHTP device [ 1928.712490] wlp4s0: authenticate with d8:50:e6:cb:b4:60 [ 1928.722294] wlp4s0: send auth to d8:50:e6:cb:b4:60 (try 1/3) [ 1928.731711] wlp4s0: authenticated [ 1928.734374] wlp4s0: associate with d8:50:e6:cb:b4:60 (try 1/3) [ 1928.745878] wlp4s0: RX AssocResp from d8:50:e6:cb:b4:60 (capab=0x411 status=0 aid=1) [ 1928.748113] wlp4s0: associated [ 1928.748170] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 1951.685421] e1000e: enp0s31f6 NIC Link is Down [ 1951.733934] wlp4s0: deauthenticating from d8:50:e6:cb:b4:60 by local choice (Reason: 3=DEAUTH_LEAVING) [ 1951.741306] wlp4s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22) [ 1955.302143] PM: Syncing filesystems ... done. [ 1955.336286] PM: Preparing system for sleep (mem) [ 1955.337009] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 1955.339245] OOM killer disabled. [ 1955.339245] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 1955.340664] PM: Suspending system (mem) [ 1955.340698] Suspending console(s) (use no_console_suspend to debug) [ 1955.554242] e1000e: EEE TX LPI TIMER: 00000011 [ 1955.773137] PM: suspend of devices complete after 432.323 msecs [ 1955.792400] PM: late suspend of devices complete after 19.252 msecs [ 1955.848477] PM: noirq suspend of devices complete after 56.066 msecs [ 1955.848789] ACPI: Preparing to enter system sleep state S3 [ 1956.136461] ACPI: EC: event blocked [ 1956.136464] ACPI: EC: EC stopped [ 1956.136466] PM: Saving platform NVS memory [ 1956.136491] Disabling non-boot CPUs ... [ 1956.153921] smpboot: CPU 1 is now offline [ 1956.176824] IRQ 122: no longer affine to CPU2 [ 1956.176829] IRQ 133: no longer affine to CPU2 [ 1956.178083] smpboot: CPU 2 is now offline [ 1956.200729] IRQ 1: no longer affine to CPU3 [ 1956.200731] IRQ 8: no longer affine to CPU3 [ 1956.200734] IRQ 9: no longer affine to CPU3 [ 1956.200736] IRQ 12: no longer affine to CPU3 [ 1956.200739] IRQ 20: no longer affine to CPU3 [ 1956.200759] IRQ 129: no longer affine to CPU3 [ 1956.201763] smpboot: CPU 3 is now offline [ 1956.204771] ACPI: Low-level resume complete [ 1956.204885] ACPI: EC: EC started [ 1956.204885] PM: Restoring platform NVS memory [ 1956.205603] Suspended for 6468.996 seconds [ 1956.206806] Enabling non-boot CPUs ... [ 1956.206849] x86: Booting SMP configuration: [ 1956.206850] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 1956.208567] cache: parent cpu1 should not be sleeping [ 1956.208822] CPU1 is up [ 1956.208866] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 1956.210570] cache: parent cpu2 should not be sleeping [ 1956.210892] CPU2 is up [ 1956.210922] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 1956.212727] cache: parent cpu3 should not be sleeping [ 1956.213291] CPU3 is up [ 1956.216502] ACPI: Waking up from system sleep state S3 [ 1956.867500] PM: noirq resume of devices complete after 56.022 msecs [ 1956.874888] PM: early resume of devices complete after 7.367 msecs [ 1956.875509] ACPI: EC: event unblocked [ 1956.941084] xhci_hcd 0000:00:14.0: port 8 resume PLC timeout [ 1956.958946] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout [ 1956.976568] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [ 1957.216736] usb 1-8: reset high-speed USB device number 4 using xhci_hcd [ 1957.476498] usb 1-7: reset full-speed USB device number 10 using xhci_hcd [ 1957.640988] psmouse serio1: synaptics: queried max coordinates: x [..5678], y [..4754] [ 1957.679836] psmouse serio1: synaptics: queried min coordinates: x [1262..], y [1098..] [ 1957.680898] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=2 [ 1957.735884] usb 1-9: reset full-speed USB device number 5 using xhci_hcd [ 1957.878158] PM: resume of devices complete after 1003.322 msecs [ 1957.878277] usb 1-7:1.0: rebind failed: -517 [ 1957.878280] usb 1-7:1.1: rebind failed: -517 [ 1957.878811] PM: Finishing wakeup. [ 1957.878812] OOM killer enabled. [ 1957.878813] Restarting tasks ... [ 1957.879610] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014 [ 1957.881312] [drm] RC6 on [ 1957.886611] Bluetooth: hci0: Device revision is 5 [ 1957.886613] Bluetooth: hci0: Secure boot is enabled [ 1957.886613] Bluetooth: hci0: OTP lock is enabled [ 1957.886614] Bluetooth: hci0: API lock is enabled [ 1957.886615] Bluetooth: hci0: Debug lock is disabled [ 1957.886616] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 1957.886619] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi [ 1957.896601] done. [ 1957.903778] thermal thermal_zone3: failed to read out thermal zone (-5) [ 1957.937727] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 1958.127392] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 1958.128748] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 1958.303322] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [ 1958.376344] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 1958.446498] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 1959.499105] Bluetooth: hci0: Waiting for firmware download to complete [ 1959.499575] Bluetooth: hci0: Firmware loaded in 1582905 usecs [ 1959.499597] Bluetooth: hci0: Waiting for device to boot [ 1959.510694] Bluetooth: hci0: Device booted in 10854 usecs [ 1959.510697] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc [ 1959.514701] Bluetooth: hci0: Applying Intel DDC parameters completed [ 1960.079225] hid-sensor-hub 001F:8086:22D8.0002: timeout waiting for response from ISHTP device [ 1962.910231] wlp4s0: authenticate with d8:50:e6:cb:b4:60 [ 1962.921749] wlp4s0: send auth to d8:50:e6:cb:b4:60 (try 1/3) [ 1962.936259] wlp4s0: authenticated [ 1962.938898] wlp4s0: associate with d8:50:e6:cb:b4:60 (try 1/3) [ 1962.945248] wlp4s0: RX AssocResp from d8:50:e6:cb:b4:60 (capab=0x411 status=0 aid=1) [ 1962.948891] wlp4s0: associated [ 1962.948948] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 3757.323430] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [ 4480.362837] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [ 4489.547555] thinkpad_acpi: EC reports that Thermal Table has changed [ 4494.047062] usb 1-1: new high-speed USB device number 11 using xhci_hcd [ 4494.267811] usb 1-1: New USB device found, idVendor=0bda, idProduct=5411 [ 4494.267814] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4494.267815] usb 1-1: Product: 4-Port USB 2.0 Hub [ 4494.267816] usb 1-1: Manufacturer: Generic [ 4494.268836] hub 1-1:1.0: USB hub found [ 4494.270026] hub 1-1:1.0: 4 ports detected [ 4494.375619] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd [ 4494.411336] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411 [ 4494.411338] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4494.411339] usb 2-1: Product: 4-Port USB 3.0 Hub [ 4494.411340] usb 2-1: Manufacturer: Generic [ 4494.421151] hub 2-1:1.0: USB hub found [ 4494.423863] hub 2-1:1.0: 4 ports detected [ 4494.562779] usb 1-1.1: new high-speed USB device number 12 using xhci_hcd [ 4494.683016] usb 1-1.1: New USB device found, idVendor=0bda, idProduct=5411 [ 4494.683018] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4494.683019] usb 1-1.1: Product: 4-Port USB 2.0 Hub [ 4494.683020] usb 1-1.1: Manufacturer: Generic [ 4494.684473] hub 1-1.1:1.0: USB hub found [ 4494.685621] hub 1-1.1:1.0: 4 ports detected [ 4494.755927] usb 2-1.1: new SuperSpeed USB device number 3 using xhci_hcd [ 4494.792201] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0411 [ 4494.792211] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4494.792218] usb 2-1.1: Product: 4-Port USB 3.0 Hub [ 4494.792225] usb 2-1.1: Manufacturer: Generic [ 4494.801908] hub 2-1.1:1.0: USB hub found [ 4494.803054] hub 2-1.1:1.0: 4 ports detected [ 4494.974658] usb 1-1.1.1: new full-speed USB device number 13 using xhci_hcd [ 4495.080193] usb 1-1.1.1: New USB device found, idVendor=046d, idProduct=c24d [ 4495.080195] usb 1-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4495.080197] usb 1-1.1.1: Product: Logitech G710 Keyboard [ 4495.080198] usb 1-1.1.1: Manufacturer: Logitech [ 4495.084403] input: Logitech Logitech G710 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/0003:046D:C24D.0004/input/input18 [ 4495.143354] hid-generic 0003:046D:C24D.0004: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech G710 Keyboard] on usb-0000:00:14.0-1.1.1/input0 [ 4495.145658] input: Logitech Logitech G710 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.1/0003:046D:C24D.0005/input/input19 [ 4495.159668] usb 2-1.1.4: new SuperSpeed USB device number 4 using xhci_hcd [ 4495.188189] usb 2-1.1.4: New USB device found, idVendor=0b95, idProduct=1790 [ 4495.188192] usb 2-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4495.188193] usb 2-1.1.4: Product: AX88179 [ 4495.188194] usb 2-1.1.4: Manufacturer: ASIX Elec. Corp. [ 4495.188195] usb 2-1.1.4: SerialNumber: 00000000000174 [ 4495.203574] hid-generic 0003:046D:C24D.0005: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech Logitech G710 Keyboard] on usb-0000:00:14.0-1.1.1/input1 [ 4495.282753] usb 1-1.1.3: new full-speed USB device number 14 using xhci_hcd [ 4495.392155] usb 1-1.1.3: New USB device found, idVendor=046d, idProduct=c07e [ 4495.392157] usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4495.392158] usb 1-1.1.3: Product: Gaming Mouse G402 [ 4495.392159] usb 1-1.1.3: Manufacturer: Logitech [ 4495.392160] usb 1-1.1.3: SerialNumber: 6D883FA45255 [ 4495.393852] input: Logitech Gaming Mouse G402 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0/0003:046D:C07E.0006/input/input20 [ 4495.393949] hid-generic 0003:046D:C07E.0006: input,hidraw2: USB HID v1.11 Mouse [Logitech Gaming Mouse G402] on usb-0000:00:14.0-1.1.3/input0 [ 4495.394912] input: Logitech Gaming Mouse G402 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.1/0003:046D:C07E.0007/input/input21 [ 4495.458595] hid-generic 0003:046D:C07E.0007: input,hiddev1,hidraw3: USB HID v1.11 Keyboard [Logitech Gaming Mouse G402] on usb-0000:00:14.0-1.1.3/input1 [ 4496.304337] ax88179_178a 2-1.1.4:1.0 eth0: register 'ax88179_178a' at usb-0000:00:14.0-1.1.4, ASIX AX88179 USB 3.0 Gigabit Ethernet, 00:0e:c6:d7:23:d0 [ 4496.305574] usbcore: registered new interface driver ax88179_178a [ 4496.312949] ax88179_178a 2-1.1.4:1.0 enx000ec6d723d0: renamed from eth0 [ 4496.347319] IPv6: ADDRCONF(NETDEV_UP): enx000ec6d723d0: link is not ready [ 4496.677617] IPv6: ADDRCONF(NETDEV_UP): enx000ec6d723d0: link is not ready [ 4500.017606] ax88179_178a 2-1.1.4:1.0 enx000ec6d723d0: ax88179 - Link status is: 1 [ 4500.030717] IPv6: ADDRCONF(NETDEV_CHANGE): enx000ec6d723d0: link becomes ready [ 4503.968893] IPv6: enx000ec6d723d0: IPv6 duplicate address fdba:728e:16c7::295 detected! [ 4504.109427] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [ 4530.174656] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [ 4536.937491] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [ 4538.766014] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [ 4544.861944] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [ 4631.039796] e1000e: enp0s31f6 NIC Link is Down [ 4631.090199] wlp4s0: deauthenticating from d8:50:e6:cb:b4:60 by local choice (Reason: 3=DEAUTH_LEAVING) [ 4631.098519] wlp4s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22) [ 4631.098573] wlp4s0: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-22) [ 4631.529173] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [ 4632.232221] PM: Syncing filesystems ... done. [ 4632.267355] PM: Preparing system for sleep (mem) [ 4632.268029] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 4632.270338] OOM killer disabled. [ 4632.270338] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 4632.271845] PM: Suspending system (mem) [ 4632.271878] Suspending console(s) (use no_console_suspend to debug) [ 4632.476313] e1000e: EEE TX LPI TIMER: 00000011 [ 4632.734010] PM: suspend of devices complete after 461.967 msecs [ 4632.752251] PM: late suspend of devices complete after 18.232 msecs [ 4632.808309] PM: noirq suspend of devices complete after 56.048 msecs [ 4632.808607] ACPI: Preparing to enter system sleep state S3 [ 4633.096328] ACPI: EC: event blocked [ 4633.096330] ACPI: EC: EC stopped [ 4633.096333] PM: Saving platform NVS memory [ 4633.096357] Disabling non-boot CPUs ... [ 4633.113754] smpboot: CPU 1 is now offline [ 4633.132688] IRQ 122: no longer affine to CPU2 [ 4633.132692] IRQ 129: no longer affine to CPU2 [ 4633.132695] IRQ 133: no longer affine to CPU2 [ 4633.133950] smpboot: CPU 2 is now offline [ 4633.156585] IRQ 1: no longer affine to CPU3 [ 4633.156588] IRQ 8: no longer affine to CPU3 [ 4633.156590] IRQ 9: no longer affine to CPU3 [ 4633.156592] IRQ 12: no longer affine to CPU3 [ 4633.156595] IRQ 20: no longer affine to CPU3 [ 4633.157606] smpboot: CPU 3 is now offline [ 4633.160843] ACPI: Low-level resume complete [ 4633.160957] ACPI: EC: EC started [ 4633.160958] PM: Restoring platform NVS memory [ 4633.161676] Suspended for 14.351 seconds [ 4633.162899] Enabling non-boot CPUs ... [ 4633.162951] x86: Booting SMP configuration: [ 4633.162951] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 4633.164660] cache: parent cpu1 should not be sleeping [ 4633.164915] CPU1 is up [ 4633.164939] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 4633.166728] cache: parent cpu2 should not be sleeping [ 4633.167048] CPU2 is up [ 4633.167131] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 4633.168840] cache: parent cpu3 should not be sleeping [ 4633.169379] CPU3 is up [ 4633.172615] ACPI: Waking up from system sleep state S3 [ 4633.823429] PM: noirq resume of devices complete after 56.026 msecs [ 4633.830870] PM: early resume of devices complete after 7.419 msecs [ 4633.831667] ACPI: button: The lid device is not compliant to SW_LID. [ 4633.831673] ACPI: EC: event unblocked [ 4633.897222] xhci_hcd 0000:00:14.0: port 8 resume PLC timeout [ 4633.915148] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout [ 4633.933164] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [ 4633.933189] usb 2-1: Disable of device-initiated U1 failed. [ 4633.936707] usb 2-1: Disable of device-initiated U2 failed. [ 4634.091876] e1000e 0000:00:1f.6: Failed to restore TIMINCA clock rate delta: -22 [ 4634.115828] usb 2-1: reset SuperSpeed USB device number 2 using xhci_hcd [ 4634.319664] usb 1-8: reset high-speed USB device number 4 using xhci_hcd [ 4634.377506] usb 2-1.1: Disable of device-initiated U1 failed. [ 4634.381622] usb 2-1.1: Disable of device-initiated U2 failed. [ 4634.508636] thinkpad_acpi: EC reports that Thermal Table has changed [ 4634.580300] usb 1-1: reset high-speed USB device number 11 using xhci_hcd [ 4634.583053] psmouse serio1: synaptics: queried max coordinates: x [..5678], y [..4754] [ 4634.616479] thinkpad_acpi: EC reports that Thermal Table has changed [ 4634.623126] psmouse serio1: synaptics: queried min coordinates: x [1262..], y [1098..] [ 4634.688784] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=2 [ 4634.911571] [drm] RC6 on [ 4634.963526] usb 1-9: reset full-speed USB device number 5 using xhci_hcd [ 4635.223877] usb 1-7: reset full-speed USB device number 10 using xhci_hcd [ 4635.449052] usb 2-1.1: reset SuperSpeed USB device number 3 using xhci_hcd [ 4635.555965] usb 1-1.1: reset high-speed USB device number 12 using xhci_hcd [ 4635.717815] usb 2-1.1.4: Disable of device-initiated U1 failed. [ 4635.723079] usb 2-1.1.4: Disable of device-initiated U2 failed. [ 4635.808985] usb 2-1.1.4: reset SuperSpeed USB device number 4 using xhci_hcd [ 4635.967953] usb 1-1.1.3: reset full-speed USB device number 14 using xhci_hcd [ 4636.147876] usb 1-1.1.1: reset full-speed USB device number 13 using xhci_hcd [ 4636.256316] PM: resume of devices complete after 2425.486 msecs [ 4636.256384] usb 1-7:1.0: rebind failed: -517 [ 4636.256386] usb 1-7:1.1: rebind failed: -517 [ 4636.256972] PM: Finishing wakeup. [ 4636.256973] OOM killer enabled. [ 4636.256973] Restarting tasks ... [ 4636.257179] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014 [ 4636.264192] Bluetooth: hci0: Device revision is 5 [ 4636.264194] Bluetooth: hci0: Secure boot is enabled [ 4636.264195] Bluetooth: hci0: OTP lock is enabled [ 4636.264196] Bluetooth: hci0: API lock is enabled [ 4636.264197] Bluetooth: hci0: Debug lock is disabled [ 4636.264198] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 4636.264468] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi [ 4636.277205] done. [ 4636.281841] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [ 4636.287198] thermal thermal_zone3: failed to read out thermal zone (-5) [ 4636.464965] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 4636.655345] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 4636.656362] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 4636.916071] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 4636.917152] IPv6: ADDRCONF(NETDEV_UP): enx000ec6d723d0: link is not ready [ 4636.995314] hid-sensor-hub 001F:8086:22D8.0002: timeout waiting for response from ISHTP device [ 4637.257108] IPv6: ADDRCONF(NETDEV_UP): enx000ec6d723d0: link is not ready [ 4637.344452] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 4637.919437] Bluetooth: hci0: Waiting for firmware download to complete [ 4637.920149] Bluetooth: hci0: Firmware loaded in 1624337 usecs [ 4637.920222] Bluetooth: hci0: Waiting for device to boot [ 4637.931365] Bluetooth: hci0: Device booted in 10925 usecs [ 4637.931444] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc [ 4637.935363] Bluetooth: hci0: Applying Intel DDC parameters completed [ 4640.586893] ax88179_178a 2-1.1.4:1.0 enx000ec6d723d0: ax88179 - Link status is: 1 [ 4640.597906] IPv6: ADDRCONF(NETDEV_CHANGE): enx000ec6d723d0: link becomes ready [ 4642.122186] wlp4s0: authenticate with d8:50:e6:cb:b4:60 [ 4642.131395] wlp4s0: send auth to d8:50:e6:cb:b4:60 (try 1/3) [ 4642.139616] wlp4s0: authenticated [ 4642.143083] wlp4s0: associate with d8:50:e6:cb:b4:60 (try 1/3) [ 4642.149134] wlp4s0: RX AssocResp from d8:50:e6:cb:b4:60 (capab=0x411 status=0 aid=1) [ 4642.154569] wlp4s0: associated [ 4642.154645] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 4644.931335] IPv6: enx000ec6d723d0: IPv6 duplicate address fdba:728e:16c7::295 detected! [ 4743.401855] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [ 5134.360778] e1000e: enp0s31f6 NIC Link is Down [ 5134.443715] wlp4s0: deauthenticating from d8:50:e6:cb:b4:60 by local choice (Reason: 3=DEAUTH_LEAVING) [ 5134.462543] wlp4s0: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-22) [ 5138.157178] PM: Syncing filesystems ... done. [ 5138.184521] PM: Preparing system for sleep (mem) [ 5138.185428] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 5138.187582] OOM killer disabled. [ 5138.187583] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5138.189165] PM: Suspending system (mem) [ 5138.189199] Suspending console(s) (use no_console_suspend to debug) [ 5138.397620] e1000e: EEE TX LPI TIMER: 00000011 [ 5138.634961] PM: suspend of devices complete after 445.598 msecs [ 5138.653243] PM: late suspend of devices complete after 18.278 msecs [ 5138.709169] PM: noirq suspend of devices complete after 55.915 msecs [ 5138.709453] ACPI: Preparing to enter system sleep state S3 [ 5138.997180] ACPI: EC: event blocked [ 5138.997182] ACPI: EC: EC stopped [ 5138.997201] PM: Saving platform NVS memory [ 5138.997206] Disabling non-boot CPUs ... [ 5139.014876] smpboot: CPU 1 is now offline [ 5139.033543] IRQ 122: no longer affine to CPU2 [ 5139.033546] IRQ 129: no longer affine to CPU2 [ 5139.034550] smpboot: CPU 2 is now offline [ 5139.057466] IRQ 1: no longer affine to CPU3 [ 5139.057469] IRQ 8: no longer affine to CPU3 [ 5139.057471] IRQ 9: no longer affine to CPU3 [ 5139.057473] IRQ 12: no longer affine to CPU3 [ 5139.057476] IRQ 20: no longer affine to CPU3 [ 5139.057484] IRQ 133: no longer affine to CPU3 [ 5139.058489] smpboot: CPU 3 is now offline [ 5139.061701] ACPI: Low-level resume complete [ 5139.061815] ACPI: EC: EC started [ 5139.061815] PM: Restoring platform NVS memory [ 5139.062533] Suspended for 10820.186 seconds [ 5139.063770] Enabling non-boot CPUs ... [ 5139.063835] x86: Booting SMP configuration: [ 5139.063835] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 5139.065550] cache: parent cpu1 should not be sleeping [ 5139.065806] CPU1 is up [ 5139.065832] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 5139.067528] cache: parent cpu2 should not be sleeping [ 5139.067852] CPU2 is up [ 5139.067939] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 5139.069665] cache: parent cpu3 should not be sleeping [ 5139.070261] CPU3 is up [ 5139.073470] ACPI: Waking up from system sleep state S3 [ 5139.724288] PM: noirq resume of devices complete after 56.043 msecs [ 5139.731797] PM: early resume of devices complete after 7.486 msecs [ 5139.732418] ACPI: EC: event unblocked [ 5139.736401] usb 2-1: Disable of device-initiated U1 failed. [ 5139.739882] usb 2-1: Disable of device-initiated U2 failed. [ 5139.798277] xhci_hcd 0000:00:14.0: port 8 resume PLC timeout [ 5139.816295] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout [ 5139.834183] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [ 5139.954027] usb 2-1: reset SuperSpeed USB device number 2 using xhci_hcd [ 5140.101289] usb 1-8: reset high-speed USB device number 4 using xhci_hcd [ 5140.218434] usb 2-1.1: Disable of device-initiated U1 failed. [ 5140.223424] usb 2-1.1: Disable of device-initiated U2 failed. [ 5140.360617] usb 1-7: reset full-speed USB device number 10 using xhci_hcd [ 5140.393723] thinkpad_acpi: EC reports that Thermal Table has changed [ 5140.501592] thinkpad_acpi: EC reports that Thermal Table has changed [ 5140.563557] psmouse serio1: synaptics: queried max coordinates: x [..5678], y [..4754] [ 5140.602988] psmouse serio1: synaptics: queried min coordinates: x [1262..], y [1098..] [ 5140.605742] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=2 [ 5140.620446] usb 1-9: reset full-speed USB device number 5 using xhci_hcd [ 5140.881026] usb 1-1: reset high-speed USB device number 11 using xhci_hcd [ 5140.924956] [drm] RC6 on [ 5141.177478] usb 2-1.1: reset SuperSpeed USB device number 3 using xhci_hcd [ 5141.389277] usb 1-1.1: reset high-speed USB device number 12 using xhci_hcd [ 5141.450948] usb 2-1.1.4: Disable of device-initiated U1 failed. [ 5141.455679] usb 2-1.1.4: Disable of device-initiated U2 failed. [ 5141.589823] usb 2-1.1.4: reset SuperSpeed USB device number 4 using xhci_hcd [ 5141.805170] usb 1-1.1.1: reset full-speed USB device number 13 using xhci_hcd [ 5141.984788] usb 1-1.1.3: reset full-speed USB device number 14 using xhci_hcd [ 5142.089719] PM: resume of devices complete after 2357.953 msecs [ 5142.089826] usb 1-7:1.0: rebind failed: -517 [ 5142.089828] usb 1-7:1.1: rebind failed: -517 [ 5142.090330] PM: Finishing wakeup. [ 5142.090331] OOM killer enabled. [ 5142.090332] Restarting tasks ... [ 5142.090921] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014 [ 5142.097918] Bluetooth: hci0: Device revision is 5 [ 5142.097920] Bluetooth: hci0: Secure boot is enabled [ 5142.097921] Bluetooth: hci0: OTP lock is enabled [ 5142.097921] Bluetooth: hci0: API lock is enabled [ 5142.097922] Bluetooth: hci0: Debug lock is disabled [ 5142.097923] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 5142.097926] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi [ 5142.108017] done. [ 5142.114970] thermal thermal_zone3: failed to read out thermal zone (-5) [ 5142.228964] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 5142.416151] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 5142.416879] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 5142.516039] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [ 5142.661558] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 5142.662437] IPv6: ADDRCONF(NETDEV_UP): enx000ec6d723d0: link is not ready [ 5142.843981] hid-sensor-hub 001F:8086:22D8.0002: timeout waiting for response from ISHTP device [ 5142.992481] IPv6: ADDRCONF(NETDEV_UP): enx000ec6d723d0: link is not ready [ 5143.098834] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 5143.557464] Bluetooth: hci0: Waiting for firmware download to complete [ 5143.558125] Bluetooth: hci0: Firmware loaded in 1433435 usecs [ 5143.558141] Bluetooth: hci0: Waiting for device to boot [ 5143.569125] Bluetooth: hci0: Device booted in 10739 usecs [ 5143.569127] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc [ 5143.573138] Bluetooth: hci0: Applying Intel DDC parameters completed [ 5146.304873] ax88179_178a 2-1.1.4:1.0 enx000ec6d723d0: ax88179 - Link status is: 1 [ 5146.309468] IPv6: ADDRCONF(NETDEV_CHANGE): enx000ec6d723d0: link becomes ready [ 5147.612886] wlp4s0: authenticate with d8:50:e6:cb:b4:60 [ 5147.622275] wlp4s0: send auth to d8:50:e6:cb:b4:60 (try 1/3) [ 5147.630907] wlp4s0: authenticated [ 5147.632133] wlp4s0: associate with d8:50:e6:cb:b4:60 (try 1/3) [ 5147.636151] wlp4s0: RX AssocResp from d8:50:e6:cb:b4:60 (capab=0x411 status=0 aid=1) [ 5147.637450] wlp4s0: associated [ 5147.637506] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 5152.126325] IPv6: wlp4s0: IPv6 duplicate address fdba:728e:16c7::295 detected! [ 6141.752054] e1000e: enp0s31f6 NIC Link is Down [ 6141.803826] wlp4s0: deauthenticating from d8:50:e6:cb:b4:60 by local choice (Reason: 3=DEAUTH_LEAVING) [ 6141.812384] wlp4s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22) [ 6146.152873] PM: Syncing filesystems ... done. [ 6146.179003] PM: Preparing system for sleep (mem) [ 6146.179766] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 6146.182224] OOM killer disabled. [ 6146.182225] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 6146.183768] PM: Suspending system (mem) [ 6146.183801] Suspending console(s) (use no_console_suspend to debug) [ 6146.389714] e1000e: EEE TX LPI TIMER: 00000011 [ 6146.622230] PM: suspend of devices complete after 438.261 msecs [ 6146.640554] PM: late suspend of devices complete after 18.310 msecs [ 6146.696551] PM: noirq suspend of devices complete after 55.985 msecs [ 6146.696835] ACPI: Preparing to enter system sleep state S3 [ 6146.984566] ACPI: EC: event blocked [ 6146.984568] ACPI: EC: EC stopped [ 6146.984571] PM: Saving platform NVS memory [ 6146.984597] Disabling non-boot CPUs ... [ 6147.002052] smpboot: CPU 1 is now offline [ 6147.024942] IRQ 129: no longer affine to CPU2 [ 6147.024946] IRQ 133: no longer affine to CPU2 [ 6147.026199] smpboot: CPU 2 is now offline [ 6147.048836] IRQ 1: no longer affine to CPU3 [ 6147.048838] IRQ 8: no longer affine to CPU3 [ 6147.048840] IRQ 9: no longer affine to CPU3 [ 6147.048843] IRQ 12: no longer affine to CPU3 [ 6147.048846] IRQ 20: no longer affine to CPU3 [ 6147.048849] IRQ 122: no longer affine to CPU3 [ 6147.049856] smpboot: CPU 3 is now offline [ 6147.053053] ACPI: Low-level resume complete [ 6147.053167] ACPI: EC: EC started [ 6147.053167] PM: Restoring platform NVS memory [ 6147.053884] Suspended for 82961.288 seconds [ 6147.055103] Enabling non-boot CPUs ... [ 6147.055181] x86: Booting SMP configuration: [ 6147.055182] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 6147.056885] cache: parent cpu1 should not be sleeping [ 6147.057135] CPU1 is up [ 6147.057210] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 6147.059015] cache: parent cpu2 should not be sleeping [ 6147.059347] CPU2 is up [ 6147.059376] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 6147.061111] cache: parent cpu3 should not be sleeping [ 6147.061720] CPU3 is up [ 6147.064913] ACPI: Waking up from system sleep state S3 [ 6147.711674] PM: noirq resume of devices complete after 56.040 msecs [ 6147.719129] PM: early resume of devices complete after 7.432 msecs [ 6147.719928] ACPI: EC: event unblocked [ 6147.723778] usb 2-1: Disable of device-initiated U1 failed. [ 6147.727324] usb 2-1: Disable of device-initiated U2 failed. [ 6147.785055] xhci_hcd 0000:00:14.0: port 8 resume PLC timeout [ 6147.806121] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout [ 6147.823709] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [ 6147.933722] e1000e 0000:00:1f.6: Failed to restore TIMINCA clock rate delta: -22 [ 6147.945429] usb 2-1: reset SuperSpeed USB device number 2 using xhci_hcd [ 6148.092633] usb 1-8: reset high-speed USB device number 4 using xhci_hcd [ 6148.213449] usb 2-1.1: Disable of device-initiated U1 failed. [ 6148.218424] usb 2-1.1: Disable of device-initiated U2 failed. [ 6148.352082] usb 1-9: reset full-speed USB device number 5 using xhci_hcd [ 6148.389651] thinkpad_acpi: EC reports that Thermal Table has changed [ 6148.497361] thinkpad_acpi: EC reports that Thermal Table has changed [ 6148.561899] psmouse serio1: synaptics: queried max coordinates: x [..5678], y [..4754] [ 6148.599986] psmouse serio1: synaptics: queried min coordinates: x [1262..], y [1098..] [ 6148.601203] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=2 [ 6148.612081] usb 1-7: reset full-speed USB device number 10 using xhci_hcd [ 6148.872394] usb 1-1: reset high-speed USB device number 11 using xhci_hcd [ 6148.888333] [drm] RC6 on [ 6149.169020] usb 2-1.1: reset SuperSpeed USB device number 3 using xhci_hcd [ 6149.387963] usb 1-1.1: reset high-speed USB device number 12 using xhci_hcd [ 6149.437922] usb 2-1.1.4: Disable of device-initiated U1 failed. [ 6149.443036] usb 2-1.1.4: Disable of device-initiated U2 failed. [ 6149.585410] usb 2-1.1.4: reset SuperSpeed USB device number 4 using xhci_hcd [ 6149.800456] usb 1-1.1.1: reset full-speed USB device number 13 using xhci_hcd [ 6149.980039] usb 1-1.1.3: reset full-speed USB device number 14 using xhci_hcd [ 6150.085234] PM: resume of devices complete after 2366.107 msecs [ 6150.085345] usb 1-7:1.0: rebind failed: -517 [ 6150.085347] usb 1-7:1.1: rebind failed: -517 [ 6150.085842] PM: Finishing wakeup. [ 6150.085844] OOM killer enabled. [ 6150.085844] Restarting tasks ... [ 6150.086761] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014 [ 6150.092785] Bluetooth: hci0: Device revision is 5 [ 6150.092786] Bluetooth: hci0: Secure boot is enabled [ 6150.092787] Bluetooth: hci0: OTP lock is enabled [ 6150.092788] Bluetooth: hci0: API lock is enabled [ 6150.092789] Bluetooth: hci0: Debug lock is disabled [ 6150.092790] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 6150.093025] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi [ 6150.097151] done. [ 6150.098970] thermal thermal_zone3: failed to read out thermal zone (-5) [ 6150.261886] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 6150.447570] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 6150.448579] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 6150.515419] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [ 6150.696614] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 6150.701028] IPv6: ADDRCONF(NETDEV_UP): enx000ec6d723d0: link is not ready [ 6150.967397] hid-sensor-hub 001F:8086:22D8.0002: timeout waiting for response from ISHTP device [ 6151.031992] IPv6: ADDRCONF(NETDEV_UP): enx000ec6d723d0: link is not ready [ 6151.146244] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 6151.495759] Bluetooth: hci0: Waiting for firmware download to complete [ 6151.496758] Bluetooth: hci0: Firmware loaded in 1377879 usecs [ 6151.496917] Bluetooth: hci0: Waiting for device to boot [ 6151.507932] Bluetooth: hci0: Device booted in 10800 usecs [ 6151.507967] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc [ 6151.511967] Bluetooth: hci0: Applying Intel DDC parameters completed [ 6154.163749] ax88179_178a 2-1.1.4:1.0 enx000ec6d723d0: ax88179 - Link status is: 1 [ 6154.168642] IPv6: ADDRCONF(NETDEV_CHANGE): enx000ec6d723d0: link becomes ready [ 6155.616766] wlp4s0: authenticate with d8:50:e6:cb:b4:60 [ 6155.625782] wlp4s0: send auth to d8:50:e6:cb:b4:60 (try 1/3) [ 6155.635068] wlp4s0: authenticated [ 6155.635674] wlp4s0: associate with d8:50:e6:cb:b4:60 (try 1/3) [ 6155.639536] wlp4s0: RX AssocResp from d8:50:e6:cb:b4:60 (capab=0x411 status=0 aid=1) [ 6155.641630] wlp4s0: associated [ 6155.641897] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 6224.825540] systemd: 42 output lines suppressed due to ratelimiting [ 6225.379124] systemd-journald[405]: Received SIGTERM from PID 1 (systemd). [ 8673.107460] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [ 9717.724878] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1) [ 9717.724879] CPU2: Core temperature above threshold, cpu clock throttled (total events = 1) [ 9717.724881] CPU2: Package temperature above threshold, cpu clock throttled (total events = 1) [ 9717.724884] CPU0: Package temperature above threshold, cpu clock throttled (total events = 1) [ 9717.724910] CPU1: Package temperature above threshold, cpu clock throttled (total events = 1) [ 9717.724911] CPU3: Package temperature above threshold, cpu clock throttled (total events = 1) [ 9717.725878] CPU0: Core temperature/speed normal [ 9717.725880] CPU1: Package temperature/speed normal [ 9717.725881] CPU3: Package temperature/speed normal [ 9717.725881] CPU2: Core temperature/speed normal [ 9717.725882] CPU2: Package temperature/speed normal [ 9717.725882] CPU0: Package temperature/speed normal [ 9809.824771] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [ 9824.697757] usb 1-1: USB disconnect, device number 11 [ 9824.697759] usb 1-1.1: USB disconnect, device number 12 [ 9824.697761] usb 1-1.1.1: USB disconnect, device number 13 [ 9824.881354] usb 1-1.1.3: USB disconnect, device number 14 [ 9825.416690] xhci_hcd 0000:00:14.0: Cannot set link state. [ 9825.416696] usb usb2-port1: cannot disable (err = -32) [ 9825.416700] usb 2-1: USB disconnect, device number 2 [ 9825.416701] usb 2-1.1: USB disconnect, device number 3 [ 9825.416703] usb 2-1.1.4: USB disconnect, device number 4 [ 9825.416896] ax88179_178a 2-1.1.4:1.0 enx000ec6d723d0: unregister 'ax88179_178a' usb-0000:00:14.0-1.1.4, ASIX AX88179 USB 3.0 Gigabit Ethernet [ 9825.416908] ax88179_178a 2-1.1.4:1.0 enx000ec6d723d0: Failed to read reg index 0x0002: -19 [ 9825.416909] ax88179_178a 2-1.1.4:1.0 enx000ec6d723d0: Failed to write reg index 0x0002: -19 [ 9825.452757] ax88179_178a 2-1.1.4:1.0 enx000ec6d723d0 (unregistered): Failed to write reg index 0x0002: -19 [ 9825.452759] ax88179_178a 2-1.1.4:1.0 enx000ec6d723d0 (unregistered): Failed to write reg index 0x0001: -19 [ 9825.452761] ax88179_178a 2-1.1.4:1.0 enx000ec6d723d0 (unregistered): Failed to write reg index 0x0002: -19 [ 9858.065223] thinkpad_acpi: EC reports that Thermal Table has changed [ 9878.421083] thinkpad_acpi: EC reports that Thermal Table has changed [ 9915.428794] Bluetooth: Failed to disable LE scan: status 0x0c [ 9916.421989] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 9916.421994] Bluetooth: HIDP socket layer initialized [10014.179656] usb 2-1: new SuperSpeed USB device number 5 using xhci_hcd [10014.200182] usb 2-1: New USB device found, idVendor=0781, idProduct=558b [10014.200184] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [10014.200185] usb 2-1: Product: Extreme [10014.200186] usb 2-1: Manufacturer: SanDisk [10014.200187] usb 2-1: SerialNumber: 4C530001220412110394 [10014.726653] usb-storage 2-1:1.0: USB Mass Storage device detected [10014.730286] scsi host0: usb-storage 2-1:1.0 [10014.730534] usbcore: registered new interface driver usb-storage [10014.732284] usbcore: registered new interface driver uas [10015.748358] scsi 0:0:0:0: Direct-Access SanDisk Extreme 1.00 PQ: 0 ANSI: 6 [10015.748656] sd 0:0:0:0: Attached scsi generic sg0 type 0 [10015.748899] sd 0:0:0:0: [sda] 122552320 512-byte logical blocks: (62.7 GB/58.4 GiB) [10015.750085] sd 0:0:0:0: [sda] Write Protect is off [10015.750087] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [10015.750349] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [10015.781413] sda: sda1 [10015.783522] sd 0:0:0:0: [sda] Attached SCSI removable disk [10070.353882] sda: sda1 sda2 [10097.683224] xhci_hcd 0000:00:14.0: Cannot set link state. [10097.683228] usb usb2-port1: cannot disable (err = -32) [10097.683233] usb 2-1: USB disconnect, device number 5 [10379.507174] bluetoothd[1250]: segfault at 100000007 ip 00007f6907f6d108 sp 00007ffeebd82bb0 error 4 in libc-2.26.so[7f6907ee4000+1d6000] [10637.580025] usb 2-1: new SuperSpeed USB device number 6 using xhci_hcd [10637.600608] usb 2-1: New USB device found, idVendor=0781, idProduct=558b [10637.600610] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [10637.600611] usb 2-1: Product: Extreme [10637.600612] usb 2-1: Manufacturer: SanDisk [10637.600613] usb 2-1: SerialNumber: 4C530001220412110394 [10637.601302] usb-storage 2-1:1.0: USB Mass Storage device detected [10637.601398] scsi host0: usb-storage 2-1:1.0 [10638.624663] scsi 0:0:0:0: Direct-Access SanDisk Extreme 1.00 PQ: 0 ANSI: 6 [10638.624994] sd 0:0:0:0: Attached scsi generic sg0 type 0 [10638.625252] sd 0:0:0:0: [sda] 122552320 512-byte logical blocks: (62.7 GB/58.4 GiB) [10638.626441] sd 0:0:0:0: [sda] Write Protect is off [10638.626444] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [10638.626667] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [10638.655880] sda: sda1 sda2 [10638.657965] sd 0:0:0:0: [sda] Attached SCSI removable disk [10638.855419] ISO 9660 Extensions: Microsoft Joliet Level 3 [10638.857251] ISO 9660 Extensions: Microsoft Joliet Level 3 [10638.860664] ISO 9660 Extensions: RRIP_1991A