[ 2576.707734] input: Bluetooth Mouse V1 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0/hci0:13/input19 [ 2576.708649] hid-generic 0005:09DA:80F0.0004: input,hidraw0: BLUETOOTH HID v0.1e Keyboard [Bluetooth Mouse V1] on 7c:e9:d3:b4:f4:38 [ 2587.150277] usb 2-1.2: new full-speed USB device number 5 using ehci-pci [ 2587.243518] usb 2-1.2: New USB device found, idVendor=041e, idProduct=30d3 [ 2587.243530] usb 2-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=2 [ 2587.243536] usb 2-1.2: SerialNumber: 130506000195 [ 2587.267051] input: HID 041e:30d3 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.3/input/input20 [ 2587.267595] hid-generic 0003:041E:30D3.0005: input,hidraw1: USB HID v1.00 Device [HID 041e:30d3] on usb-0000:00:1d.0-1.2/input3 [ 2594.817190] input: CC:C5:0A:5F:9C:F2 as /devices/virtual/input/input21 [ 3752.008166] [drm] stuck on render ring [ 3752.008172] [drm] capturing error event; look for more information in /sys/class/drm/card0/error [ 3752.017543] [drm:i915_set_reset_status] *ERROR* render ring hung inside bo (0x3864000 ctx 2) at 0x38641c8 [ 3913.496958] perf samples too long (5019 > 5000), lowering kernel.perf_event_max_sample_rate to 25000 [ 4192.832926] thinkpad_acpi: EC reports that Thermal Table has changed [ 4193.033783] e1000e 0000:00:19.0: setting latency timer to 64 [ 4193.033854] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X [ 7085.560106] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7085.664223] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7085.679950] e1000e 0000:00:19.0: setting latency timer to 64 [ 7085.680005] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X [ 7091.125603] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7091.229709] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7096.091005] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7096.195078] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7108.118162] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7108.221918] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7121.425639] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7121.529667] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7154.638483] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7154.742519] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7174.835915] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7174.939994] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7185.370687] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7185.475049] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7204.167689] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7204.271723] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7214.158495] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7214.262678] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7234.147765] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7234.251939] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7244.890548] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7244.994722] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7274.670448] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7274.774547] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7293.443463] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7293.547485] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7303.446113] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7303.550141] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7323.415425] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7323.519467] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7334.166445] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7334.270308] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7353.387425] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7353.491483] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7357.848673] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7357.952701] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7370.003556] pci_pm_runtime_suspend(): hcd_pci_runtime_suspend+0x0/0x50 returns -16 [ 7378.846354] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7378.950218] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7491.676439] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7491.780464] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7561.914955] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7562.018960] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7629.901332] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7630.005104] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7642.880729] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7642.984535] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7651.186784] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7651.290764] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7658.716704] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7658.820815] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7677.433693] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7677.537717] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7687.628501] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7687.732522] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7690.321132] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7690.425163] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7710.490531] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7710.594618] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7721.073319] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7721.177341] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7723.690013] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7723.794033] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7738.533963] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7738.637982] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7746.988239] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7747.092406] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7750.493318] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7750.597254] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7768.137853] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7768.241866] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7772.122615] pci_pm_runtime_suspend(): hcd_pci_runtime_suspend+0x0/0x50 returns -16 [ 7799.754263] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7799.858291] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7805.623813] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7805.727887] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7868.892697] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7868.996699] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7878.047189] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7878.151132] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7883.980687] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7884.084817] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7887.565745] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7887.669809] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7898.564574] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7898.668798] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7908.003083] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7908.107173] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7942.512404] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7942.616438] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7958.168439] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7958.272641] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7970.963849] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7971.067875] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7978.301816] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7978.405953] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 7988.916633] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 7989.020675] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8001.692030] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8001.796119] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8046.327934] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8046.432104] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8052.609587] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8052.713678] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8057.462901] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8057.567079] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8064.820832] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8064.924855] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8067.573580] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8067.677605] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8071.766688] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8071.870706] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8076.335917] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8076.440054] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8086.518651] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8086.622904] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8089.347365] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8089.451394] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8095.340962] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8095.444987] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8106.631965] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8106.736004] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8112.181536] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8112.285593] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8177.758940] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8177.863125] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8246.133215] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8246.237216] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8249.325958] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8249.430068] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8258.756475] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8258.860496] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8262.013346] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8262.117368] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8274.644704] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8274.748727] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8319.712749] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8319.816737] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8325.434254] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8325.538266] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8329.459013] pci_pm_runtime_suspend(): hcd_pci_runtime_suspend+0x0/0x50 returns -16 [ 8339.878190] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8339.982112] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8404.543285] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8404.647314] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8424.680649] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8424.784676] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8432.778815] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8432.882899] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8438.796547] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8438.900531] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8503.973896] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8504.077807] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8513.944436] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8514.048445] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8516.501141] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8516.605217] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8524.859496] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8524.963547] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8536.202348] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8536.306410] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8598.867036] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8598.971056] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8608.505592] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8608.609634] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8612.862760] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8612.966779] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8633.188168] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8633.292204] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8642.810745] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8642.914825] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8646.547814] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8646.651840] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8672.390623] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8672.494666] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8686.866451] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8686.970497] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8702.138551] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8702.242547] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8706.403661] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8706.507753] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8722.475945] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8722.579962] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8727.601320] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8727.705361] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8732.874710] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8732.978747] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8750.183319] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8750.287342] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8761.658406] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8761.762399] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8776.826413] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8776.930486] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8892.561294] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8892.665329] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8909.629772] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8909.733819] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8920.776740] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8920.880773] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8951.040803] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8951.144824] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8969.953839] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8970.057928] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8973.042665] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8973.146694] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8984.009573] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8984.113598] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8990.283328] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8990.387294] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9000.722053] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9000.826088] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9019.615057] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9019.719090] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9027.737235] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9027.841334] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9040.048513] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9040.152516] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9045.278036] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9045.382007] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9049.587145] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9049.691077] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9060.281889] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9060.385987] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9079.559016] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9079.663030] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9090.061906] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9090.165840] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9108.902843] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9109.006867] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9118.853498] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9118.957705] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9130.428562] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9130.532633] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9148.389354] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9148.493500] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9168.830777] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9168.934811] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9177.817183] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9177.921268] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9183.666812] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9183.770860] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9188.095921] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9188.199957] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9208.133289] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9208.237338] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9228.134596] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9228.238610] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9238.881520] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9238.985629] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9258.106570] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9258.210583] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9266.833024] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9266.936995] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9279.688458] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9279.792382] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9287.438392] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9287.542469] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9292.839889] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9292.944111] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9297.405022] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9297.509171] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9301.586135] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9301.690167] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9308.812085] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9308.916203] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9314.481565] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9314.585680] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9373.297241] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9373.401257] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9376.714150] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9376.818170] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9387.669066] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9387.773123] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9396.307369] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9396.411380] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9406.682113] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9406.786143] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9417.429070] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9417.533075] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9420.521812] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9420.625907] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9426.815469] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9426.919514] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9436.654252] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9436.758194] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9440.771206] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9440.875386] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9471.243404] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9471.347371] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9495.953729] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9496.057750] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9503.711791] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9503.816115] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9520.724336] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9520.828347] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9524.597365] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9524.702298] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9529.838930] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9529.944281] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9565.256349] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9565.360378] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9569.233456] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9569.337429] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9573.366531] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9615.201735] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9625.740449] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9644.533464] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9654.496124] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9674.513568] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9685.240309] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9704.477415] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9714.988838] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9733.809262] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9744.756225] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9763.777211] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9773.535811] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9793.749189] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9804.276065] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9823.080986] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9833.047663] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9845.462830] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9845.566843] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9850.276069] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 9853.689317] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9863.791926] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9883.021021] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9893.547757] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9912.356780] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9923.311689] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9942.324783] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9952.103413] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9972.296733] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 9982.887644] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10002.276735] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10012.663579] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10026.543162] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10031.600523] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10042.399471] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10061.568535] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10072.151396] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10091.544486] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10101.923317] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10120.884364] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10130.682740] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10150.844260] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10161.439381] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10171.457760] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10180.812086] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10191.198844] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10197.032723] show_signal_msg: 96 callbacks suppressed [10197.032730] multiqueue0:src[31146]: segfault at 0 ip a23140bb sp a40fe860 error 4 in libavcodec.so.53.35.0[a1ff9000+65a000] [10210.148150] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10210.252176] ehci-pci 0000:00:1d.0: setting latency timer to 64 [10210.680033] ehci-pci 0000:00:1d.0: setting latency timer to 64 [10219.987032] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10240.128028] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10250.730957] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10270.088061] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10280.482784] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10299.419942] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10310.258720] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10329.395841] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10340.034655] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10359.363630] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10369.786411] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10369.890416] ehci-pci 0000:00:1d.0: setting latency timer to 64 [10388.695499] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10388.799450] ehci-pci 0000:00:1d.0: setting latency timer to 64 [10398.558064] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10398.662073] ehci-pci 0000:00:1d.0: setting latency timer to 64 [10418.663414] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10418.767458] ehci-pci 0000:00:1d.0: setting latency timer to 64 [10429.306243] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10429.410266] ehci-pci 0000:00:1d.0: setting latency timer to 64 [10448.647390] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10448.751575] ehci-pci 0000:00:1d.0: setting latency timer to 64 [10459.062167] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10459.166186] ehci-pci 0000:00:1d.0: setting latency timer to 64 [10469.496946] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10469.600961] ehci-pci 0000:00:1d.0: setting latency timer to 64 [10486.597470] ehci-pci 0000:00:1d.0: setting latency timer to 64 [10494.187704] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10507.939359] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10518.582018] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10537.911353] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10548.346117] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10567.243153] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10577.129769] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10597.214979] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10606.889530] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10627.183112] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10637.637716] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10656.514914] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10666.389531] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10686.498728] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10687.511320] thinkpad_acpi: EC reports that Thermal Table has changed [10690.051631] ehci-pci 0000:00:1a.0: setting latency timer to 64 [10690.356792] thinkpad_acpi: EC reports that Thermal Table has changed [10960.291840] ehci-pci 0000:00:1d.0: setting latency timer to 64 [11128.848458] ehci-pci 0000:00:1d.0: setting latency timer to 64 [11328.285841] ehci-pci 0000:00:1d.0: setting latency timer to 64 [12064.897937] wlan0: deauthenticating from 08:76:ff:15:f4:81 by local choice (reason=3) [12064.915478] cfg80211: Calling CRDA to update world regulatory domain [12064.933622] cfg80211: World regulatory domain updated: [12064.933633] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [12064.933642] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [12064.933650] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [12064.933657] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [12064.933664] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [12064.933671] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [12065.366268] PM: Syncing filesystems ... done. [12065.373594] PM: Preparing system for mem sleep [12065.378749] mmc0: card b1f3 removed [12065.383146] Freezing user space processes ... (elapsed 0.002 seconds) done. [12065.386111] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [12065.387422] PM: Entering mem sleep [12065.387575] Suspending console(s) (use no_console_suspend to debug) [12065.490155] ehci-pci 0000:00:1d.0: setting latency timer to 64 [12065.691934] sd 2:0:0:0: [sda] Synchronizing SCSI cache [12065.692085] sd 2:0:0:0: [sda] Stopping disk [12065.970802] mei_me 0000:00:16.0: suspend [12066.021086] PM: suspend of devices complete after 530.568 msecs [12066.021427] PM: late suspend of devices complete after 0.336 msecs [12066.038123] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [12066.054290] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [12066.069954] e1000e 0000:00:19.0: System wakeup enabled by ACPI [12066.101953] PM: noirq suspend of devices complete after 80.499 msecs [12066.102833] ACPI: Preparing to enter system sleep state S3 [12066.107595] PM: Saving platform NVS memory [12066.110647] Disabling non-boot CPUs ... [12066.213918] smpboot: CPU 1 is now offline [12066.317944] smpboot: CPU 2 is now offline [12066.318869] Broke affinity for irq 16 [12066.318881] Broke affinity for irq 23 [12066.421969] smpboot: CPU 3 is now offline [12066.424287] ACPI: Low-level resume complete [12066.424322] PM: Restoring platform NVS memory [12066.425136] Enabling non-boot CPUs ... [12066.425217] smpboot: Booting Node 0 Processor 1 APIC 0x1 [12066.436104] Initializing CPU#1 [12066.436810] Disabled fast string operations [12066.572633] CPU1 is up [12066.572683] smpboot: Booting Node 0 Processor 2 APIC 0x2 [12066.583504] Initializing CPU#2 [12066.584209] Disabled fast string operations [12066.664710] CPU2 is up [12066.664754] smpboot: Booting Node 0 Processor 3 APIC 0x3 [12066.675575] Initializing CPU#3 [12066.676279] Disabled fast string operations [12066.756733] CPU3 is up [12066.761294] ACPI: Waking up from system sleep state S3 [12066.912726] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [12066.944726] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [12066.993081] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz. [12066.993225] PM: noirq resume of devices complete after 160.402 msecs [12066.993527] PM: early resume of devices complete after 0.247 msecs [12066.993584] i915 0000:00:02.0: setting latency timer to 64 [12066.993627] e1000e 0000:00:19.0: System wakeup disabled by ACPI [12066.993650] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X [12066.993654] e1000e 0000:00:19.0: setting latency timer to 64 [12066.993691] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [12066.993796] ahci 0000:00:1f.2: setting latency timer to 64 [12066.994128] ehci-pci 0000:00:1a.0: setting latency timer to 64 [12066.994187] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [12066.994283] ehci-pci 0000:00:1d.0: setting latency timer to 64 [12066.997149] [drm] Wrong MCH_SSKPD value: 0x16040307 [12066.997150] [drm] This can cause pipe underruns and display issues. [12066.997150] [drm] Please upgrade your BIOS to fix this. [12066.997521] mei_me 0000:00:16.0: reset: properties response hbm wrong status. [12066.997525] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING [12067.040724] tpm_tis 00:09: TPM is disabled/deactivated (0x6) [12067.204849] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci [12067.336758] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [12067.336777] ata2: SATA link down (SStatus 0 SControl 300) [12067.337087] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [12067.337089] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [12067.337091] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [12067.337635] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [12067.337637] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [12067.337638] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [12067.337841] ata3.00: configured for UDMA/133 [12067.344756] ata5: SATA link down (SStatus 0 SControl 300) [12067.352782] sd 2:0:0:0: [sda] Starting disk [12067.368889] usb 1-1.3: reset full-speed USB device number 3 using ehci-pci [12067.533031] usb 1-1.4: reset full-speed USB device number 4 using ehci-pci [12067.627523] btusb 1-1.4:1.0: no reset_resume for driver btusb? [12067.627526] btusb 1-1.4:1.1: no reset_resume for driver btusb? [12067.697145] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci [12067.799780] PM: resume of devices complete after 806.035 msecs [12067.800075] ACPI: \_SB_.PCI0.LPC_.EC__.BAT1: docking [12067.800082] PM: Finishing wakeup. [12067.800083] Restarting tasks ... done. [12067.802402] video LNXVIDEO:00: Restoring backlight state [12067.805703] ACPI: \_SB_.PCI0.LPC_.EC__.BAT1: Unable to dock! [12067.812289] usb 2-1.2: USB disconnect, device number 5 [12068.092558] mmc0: new high speed SD card at address b1f3 [12068.092918] mmcblk0: mmc0:b1f3 SD01G 982 MiB [12068.094119] mmcblk0: p1 [12068.213027] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [12068.225336] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [12068.329145] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [12068.329515] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [12068.333764] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [12068.333966] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [12068.424921] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [12068.675568] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [12073.998568] mei_me 0000:00:16.0: wait hw ready failed. status = -110 [12073.998586] mei_me 0000:00:16.0: hw_start failed disabling the device [12074.885991] wlan0: authenticate with 08:76:ff:15:f4:81 [12074.891547] wlan0: send auth to 08:76:ff:15:f4:81 (try 1/3) [12074.893616] wlan0: authenticated [12074.893744] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [12074.893758] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [12074.894766] wlan0: associate with 08:76:ff:15:f4:81 (try 1/3) [12074.897314] wlan0: RX AssocResp from 08:76:ff:15:f4:81 (capab=0x411 status=0 aid=1) [12074.902099] wlan0: associated [12074.902155] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [12082.533675] input: CC:C5:0A:5F:9C:F2 as /devices/virtual/input/input22 [12383.127259] ehci-pci 0000:00:1d.0: setting latency timer to 64 [12383.351180] usb 2-1.2: new full-speed USB device number 6 using ehci-pci [12383.444325] usb 2-1.2: New USB device found, idVendor=041e, idProduct=30d3 [12383.444338] usb 2-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=2 [12383.444344] usb 2-1.2: SerialNumber: 130506000195 [12383.467168] input: HID 041e:30d3 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.3/input/input23 [12383.467502] hid-generic 0003:041E:30D3.0006: input,hidraw0: USB HID v1.00 Device [HID 041e:30d3] on usb-0000:00:1d.0-1.2/input3 [16537.418158] wlan0: deauthenticating from 08:76:ff:15:f4:81 by local choice (reason=3) [16537.434504] cfg80211: Calling CRDA to update world regulatory domain [16537.441138] cfg80211: World regulatory domain updated: [16537.441146] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [16537.441150] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [16537.441155] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [16537.441158] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [16537.441161] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [16537.441164] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [16537.772627] init: anacron main process (8291) killed by TERM signal [16537.842071] PM: Syncing filesystems ... done. [16537.851301] PM: Preparing system for mem sleep [16537.851914] mmc0: card b1f3 removed [16537.853602] Freezing user space processes ... (elapsed 0.001 seconds) done. [16537.855141] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [16537.856332] PM: Entering mem sleep [16537.856399] Suspending console(s) (use no_console_suspend to debug) [16538.055110] sd 2:0:0:0: [sda] Synchronizing SCSI cache [16538.055199] sd 2:0:0:0: [sda] Stopping disk [16538.339727] mei_me 0000:00:16.0: suspend [16538.390130] PM: suspend of devices complete after 533.493 msecs [16538.390327] PM: late suspend of devices complete after 0.194 msecs [16538.403315] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [16538.419458] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [16538.435229] e1000e 0000:00:19.0: System wakeup enabled by ACPI [16538.467218] PM: noirq suspend of devices complete after 76.865 msecs [16538.468106] ACPI: Preparing to enter system sleep state S3 [16538.472546] PM: Saving platform NVS memory [16538.475614] Disabling non-boot CPUs ... [16538.579181] smpboot: CPU 1 is now offline [16538.683210] smpboot: CPU 2 is now offline [16538.684073] Broke affinity for irq 16 [16538.684088] Broke affinity for irq 41 [16538.787235] smpboot: CPU 3 is now offline [16538.791124] ACPI: Low-level resume complete [16538.791202] PM: Restoring platform NVS memory [16538.793307] Enabling non-boot CPUs ... [16538.793392] smpboot: Booting Node 0 Processor 1 APIC 0x1 [16538.804319] Initializing CPU#1 [16538.804847] Disabled fast string operations [16538.836787] CPU1 is up [16538.836836] smpboot: Booting Node 0 Processor 2 APIC 0x2 [16538.847661] Initializing CPU#2 [16538.847805] Disabled fast string operations [16538.880790] CPU2 is up [16538.880838] smpboot: Booting Node 0 Processor 3 APIC 0x3 [16538.891661] Initializing CPU#3 [16538.891804] Disabled fast string operations [16538.924796] CPU3 is up [16538.935569] ACPI: Waking up from system sleep state S3 [16538.999982] thinkpad_acpi: EC reports that Thermal Table has changed [16539.084788] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [16539.116811] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [16539.164920] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz. [16539.165057] PM: noirq resume of devices complete after 158.406 msecs [16539.165354] PM: early resume of devices complete after 0.254 msecs [16539.165425] i915 0000:00:02.0: setting latency timer to 64 [16539.165479] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X [16539.165624] e1000e 0000:00:19.0: System wakeup disabled by ACPI [16539.165669] e1000e 0000:00:19.0: setting latency timer to 64 [16539.165733] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [16539.165793] ahci 0000:00:1f.2: setting latency timer to 64 [16539.166685] ehci-pci 0000:00:1a.0: setting latency timer to 64 [16539.166837] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [16539.167170] ehci-pci 0000:00:1d.0: setting latency timer to 64 [16539.181544] [drm] Wrong MCH_SSKPD value: 0x16040307 [16539.181545] [drm] This can cause pipe underruns and display issues. [16539.181546] [drm] Please upgrade your BIOS to fix this. [16539.216802] tpm_tis 00:09: TPM is disabled/deactivated (0x6) [16539.377020] usb 1-1.4: reset full-speed USB device number 4 using ehci-pci [16539.471276] btusb 1-1.4:1.0: no reset_resume for driver btusb? [16539.471279] btusb 1-1.4:1.1: no reset_resume for driver btusb? [16539.488861] ata5: SATA link down (SStatus 0 SControl 300) [16539.488894] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [16539.489383] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [16539.489389] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [16539.489394] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [16539.490520] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [16539.490526] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [16539.490531] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [16539.490922] ata3.00: configured for UDMA/133 [16539.496875] ata2: SATA link down (SStatus 0 SControl 300) [16539.504965] sd 2:0:0:0: [sda] Starting disk [16539.541063] usb 1-1.3: reset full-speed USB device number 3 using ehci-pci [16539.705107] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci [16539.869135] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci [16540.196131] PM: resume of devices complete after 1030.494 msecs [16540.197215] PM: Finishing wakeup. [16540.197219] Restarting tasks ... done. [16540.245578] video LNXVIDEO:00: Restoring backlight state [16540.461268] init: anacron main process (8576) killed by TERM signal [16540.536101] mmc0: new high speed SD card at address b1f3 [16540.539838] mmcblk0: mmc0:b1f3 SD01G 982 MiB [16540.541566] mmcblk0: p1 [16540.761977] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [16540.865333] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [16540.865704] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [16540.870950] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [16540.871171] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [16540.961891] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [16541.121306] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [16541.183370] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [16547.459600] wlan0: authenticate with 08:76:ff:15:f4:81 [16547.462847] wlan0: send auth to 08:76:ff:15:f4:81 (try 1/3) [16547.464964] wlan0: authenticated [16547.465302] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [16547.465310] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [16547.466964] wlan0: associate with 08:76:ff:15:f4:81 (try 1/3) [16547.469552] wlan0: RX AssocResp from 08:76:ff:15:f4:81 (capab=0x411 status=0 aid=3) [16547.473606] wlan0: associated [16547.473657] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [17232.103976] ehci-pci 0000:00:1a.0: setting latency timer to 64 [17232.119799] e1000e 0000:00:19.0: setting latency timer to 64 [17232.119863] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [17232.392187] Bluetooth: hci0 ACL packet for unknown connection handle 11 [17233.138628] hid-generic 0005:09DA:80F0.0007: unknown main item tag 0x0 [17233.139090] input: Bluetooth Mouse V1 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0/hci0:11/input24 [17233.140048] hid-generic 0005:09DA:80F0.0007: input,hidraw1: BLUETOOTH HID v0.1e Keyboard [Bluetooth Mouse V1] on 7c:e9:d3:b4:f4:38 [17728.524174] ehci-pci 0000:00:1a.0: setting latency timer to 64 [17757.843978] ehci-pci 0000:00:1a.0: setting latency timer to 64 [17775.900787] ehci-pci 0000:00:1a.0: setting latency timer to 64 [17829.058931] ehci-pci 0000:00:1a.0: setting latency timer to 64 [18588.312869] ehci-pci 0000:00:1a.0: setting latency timer to 64 [19019.007770] ehci-pci 0000:00:1a.0: setting latency timer to 64 [19027.826126] ehci-pci 0000:00:1a.0: setting latency timer to 64 [19032.111250] ehci-pci 0000:00:1a.0: setting latency timer to 64 [19038.260904] ehci-pci 0000:00:1a.0: setting latency timer to 64 [19048.959764] ehci-pci 0000:00:1a.0: setting latency timer to 64 [19063.991760] ehci-pci 0000:00:1a.0: setting latency timer to 64 [19089.674570] ehci-pci 0000:00:1a.0: setting latency timer to 64 [19097.036578] ehci-pci 0000:00:1a.0: setting latency timer to 64 [19158.304846] ehci-pci 0000:00:1a.0: setting latency timer to 64 [19165.902946] ehci-pci 0000:00:1a.0: setting latency timer to 64 [19178.078131] ehci-pci 0000:00:1a.0: setting latency timer to 64 [19184.215775] ehci-pci 0000:00:1a.0: setting latency timer to 64 [19309.653154] ehci-pci 0000:00:1a.0: setting latency timer to 64 [19334.947888] ehci-pci 0000:00:1a.0: setting latency timer to 64 [19375.962807] ehci-pci 0000:00:1a.0: setting latency timer to 64 [19381.888390] ehci-pci 0000:00:1a.0: setting latency timer to 64 [19523.878206] ehci-pci 0000:00:1a.0: setting latency timer to 64 [19538.422014] ehci-pci 0000:00:1a.0: setting latency timer to 64 [20436.613225] ehci-pci 0000:00:1a.0: setting latency timer to 64 [22714.205798] wlan0: deauthenticating from 08:76:ff:15:f4:81 by local choice (reason=3) [22714.225993] cfg80211: Calling CRDA to update world regulatory domain [22714.235722] cfg80211: World regulatory domain updated: [22714.235725] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [22714.235727] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [22714.235729] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [22714.235730] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [22714.235732] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [22714.235733] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [22714.671820] ehci-pci 0000:00:1a.0: setting latency timer to 64 [22714.838172] init: anacron main process (16438) killed by TERM signal [22714.907441] PM: Syncing filesystems ... done. [22714.911627] PM: Preparing system for mem sleep [22714.912054] mmc0: card b1f3 removed [22714.914120] Freezing user space processes ... (elapsed 0.001 seconds) done. [22714.915644] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [22714.916839] PM: Entering mem sleep [22714.916904] Suspending console(s) (use no_console_suspend to debug) [22715.112080] sd 2:0:0:0: [sda] Synchronizing SCSI cache [22715.112174] sd 2:0:0:0: [sda] Stopping disk [22715.394060] mei_me 0000:00:16.0: suspend [22715.430030] PM: suspend of devices complete after 512.897 msecs [22715.430373] PM: late suspend of devices complete after 0.337 msecs [22715.443843] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [22715.459959] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [22715.475719] e1000e 0000:00:19.0: System wakeup enabled by ACPI [22715.507714] PM: noirq suspend of devices complete after 77.314 msecs [22715.508603] ACPI: Preparing to enter system sleep state S3 [22715.512974] PM: Saving platform NVS memory [22715.516077] Disabling non-boot CPUs ... [22715.619676] smpboot: CPU 1 is now offline [22715.723703] smpboot: CPU 2 is now offline [22715.724618] Broke affinity for irq 23 [22715.724623] Broke affinity for irq 41 [22715.827744] smpboot: CPU 3 is now offline [22715.831602] ACPI: Low-level resume complete [22715.831684] PM: Restoring platform NVS memory [22715.833785] Enabling non-boot CPUs ... [22715.833870] smpboot: Booting Node 0 Processor 1 APIC 0x1 [22715.844833] Initializing CPU#1 [22715.845377] Disabled fast string operations [22715.877264] CPU1 is up [22715.877320] smpboot: Booting Node 0 Processor 2 APIC 0x2 [22715.888147] Initializing CPU#2 [22715.888291] Disabled fast string operations [22715.921278] CPU2 is up [22715.921329] smpboot: Booting Node 0 Processor 3 APIC 0x3 [22715.932153] Initializing CPU#3 [22715.932297] Disabled fast string operations [22715.965287] CPU3 is up [22715.976014] ACPI: Waking up from system sleep state S3 [22716.125277] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [22716.157280] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [22716.205518] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz. [22716.205663] PM: noirq resume of devices complete after 159.886 msecs [22716.205950] PM: early resume of devices complete after 0.243 msecs [22716.206032] i915 0000:00:02.0: setting latency timer to 64 [22716.206079] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X [22716.206213] e1000e 0000:00:19.0: System wakeup disabled by ACPI [22716.206233] e1000e 0000:00:19.0: setting latency timer to 64 [22716.206281] ahci 0000:00:1f.2: setting latency timer to 64 [22716.206303] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [22716.207105] ehci-pci 0000:00:1a.0: setting latency timer to 64 [22716.207336] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [22716.207672] ehci-pci 0000:00:1d.0: setting latency timer to 64 [22716.216749] [drm] Wrong MCH_SSKPD value: 0x16040307 [22716.216751] [drm] This can cause pipe underruns and display issues. [22716.216752] [drm] Please upgrade your BIOS to fix this. [22716.257286] tpm_tis 00:09: TPM is disabled/deactivated (0x6) [22716.417571] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci [22716.541354] ata2: SATA link down (SStatus 0 SControl 300) [22716.549362] ata5: SATA link down (SStatus 0 SControl 300) [22716.557368] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [22716.557834] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [22716.557841] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [22716.557846] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [22716.558654] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [22716.558660] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [22716.558665] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [22716.558924] ata3.00: configured for UDMA/133 [22716.573444] sd 2:0:0:0: [sda] Starting disk [22716.581485] usb 1-1.3: reset full-speed USB device number 3 using ehci-pci [22716.745528] usb 1-1.4: reset full-speed USB device number 4 using ehci-pci [22716.839656] btusb 1-1.4:1.0: no reset_resume for driver btusb? [22716.839660] btusb 1-1.4:1.1: no reset_resume for driver btusb? [22716.909519] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci [22717.011488] PM: resume of devices complete after 805.315 msecs [22717.239299] PM: Finishing wakeup. [22717.253711] usb 2-1.2: USB disconnect, device number 6 [22717.239301] Restarting tasks ... done. [22717.295697] video LNXVIDEO:00: Restoring backlight state [22717.572272] init: anacron main process (16758) killed by TERM signal [22717.596623] mmc0: new high speed SD card at address b1f3 [22717.598243] mmcblk0: mmc0:b1f3 SD01G 982 MiB [22717.599359] mmcblk0: p1 [22717.781696] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [22717.794633] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [22717.897853] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [22717.898234] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [22717.901387] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [22717.902535] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [22717.991167] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [22718.156703] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [22724.541448] wlan0: authenticate with 08:76:ff:15:f4:81 [22724.547275] wlan0: send auth to 08:76:ff:15:f4:81 (try 1/3) [22724.549433] wlan0: authenticated [22724.549677] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [22724.549683] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [22724.551607] wlan0: associate with 08:76:ff:15:f4:81 (try 1/3) [22724.554151] wlan0: RX AssocResp from 08:76:ff:15:f4:81 (capab=0x411 status=0 aid=3) [22724.557996] wlan0: associated [22724.558018] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [22929.096280] ehci-pci 0000:00:1a.0: setting latency timer to 64 [22929.200312] ehci-pci 0000:00:1d.0: setting latency timer to 64 [22929.216125] e1000e 0000:00:19.0: setting latency timer to 64 [22929.216183] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [22933.665517] ehci-pci 0000:00:1a.0: setting latency timer to 64 [22940.644450] thinkpad_acpi: EC reports that Thermal Table has changed [22940.763425] ehci-pci 0000:00:1a.0: setting latency timer to 64 [23644.894859] ehci-pci 0000:00:1d.0: setting latency timer to 64 [23656.417946] ehci-pci 0000:00:1d.0: setting latency timer to 64 [23731.485930] ehci-pci 0000:00:1d.0: setting latency timer to 64 [26508.381299] ehci-pci 0000:00:1d.0: setting latency timer to 64 [26561.963565] ehci-pci 0000:00:1d.0: setting latency timer to 64 [26585.185754] ehci-pci 0000:00:1d.0: setting latency timer to 64 [28284.510205] ehci-pci 0000:00:1d.0: setting latency timer to 64 [28285.855010] wlan0: deauthenticating from 08:76:ff:15:f4:81 by local choice (reason=3) [28285.872681] cfg80211: Calling CRDA to update world regulatory domain [28285.879426] cfg80211: World regulatory domain updated: [28285.879430] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [28285.879432] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [28285.879434] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [28285.879436] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [28285.879437] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [28285.879439] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [28286.402491] PM: Syncing filesystems ... done. [28286.428738] PM: Preparing system for mem sleep [28286.433561] mmc0: card b1f3 removed [28286.435311] Freezing user space processes ... (elapsed 0.001 seconds) done. [28286.437184] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [28286.438546] PM: Entering mem sleep [28286.438691] Suspending console(s) (use no_console_suspend to debug) [28286.634256] sd 2:0:0:0: [sda] Synchronizing SCSI cache [28286.634359] sd 2:0:0:0: [sda] Stopping disk [28286.923079] mei_me 0000:00:16.0: suspend [28286.973228] PM: suspend of devices complete after 534.152 msecs [28286.973346] PM: late suspend of devices complete after 0.115 msecs [28286.986709] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [28287.002859] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [28287.018617] e1000e 0000:00:19.0: System wakeup enabled by ACPI [28287.050607] PM: noirq suspend of devices complete after 77.236 msecs [28287.051496] ACPI: Preparing to enter system sleep state S3 [28287.055866] PM: Saving platform NVS memory [28287.058897] Disabling non-boot CPUs ... [28287.162578] smpboot: CPU 1 is now offline [28287.266603] smpboot: CPU 2 is now offline [28287.370645] smpboot: CPU 3 is now offline [28287.374465] ACPI: Low-level resume complete [28287.374546] PM: Restoring platform NVS memory [28287.376644] Enabling non-boot CPUs ... [28287.376729] smpboot: Booting Node 0 Processor 1 APIC 0x1 [28287.387691] Initializing CPU#1 [28287.388218] Disabled fast string operations [28287.420170] CPU1 is up [28287.420220] smpboot: Booting Node 0 Processor 2 APIC 0x2 [28287.431046] Initializing CPU#2 [28287.431188] Disabled fast string operations [28287.464173] CPU2 is up [28287.464219] smpboot: Booting Node 0 Processor 3 APIC 0x3 [28287.475042] Initializing CPU#3 [28287.475185] Disabled fast string operations [28287.508182] CPU3 is up [28287.518913] ACPI: Waking up from system sleep state S3 [28287.583358] thinkpad_acpi: EC reports that Thermal Table has changed [28287.668176] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [28287.700178] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [28287.748289] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz. [28287.748430] PM: noirq resume of devices complete after 158.206 msecs [28287.748709] PM: early resume of devices complete after 0.235 msecs [28287.748785] i915 0000:00:02.0: setting latency timer to 64 [28287.748817] e1000e 0000:00:19.0: System wakeup disabled by ACPI [28287.748826] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X [28287.748840] e1000e 0000:00:19.0: setting latency timer to 64 [28287.748908] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [28287.749199] ahci 0000:00:1f.2: setting latency timer to 64 [28287.749237] ehci-pci 0000:00:1a.0: setting latency timer to 64 [28287.749766] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [28287.749848] ehci-pci 0000:00:1d.0: setting latency timer to 64 [28287.760256] [drm] Wrong MCH_SSKPD value: 0x16040307 [28287.760258] [drm] This can cause pipe underruns and display issues. [28287.760259] [drm] Please upgrade your BIOS to fix this. [28287.800183] tpm_tis 00:09: TPM is disabled/deactivated (0x6) [28287.960423] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci [28288.072253] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [28288.072286] ata2: SATA link down (SStatus 0 SControl 300) [28288.072727] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [28288.072733] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [28288.072738] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [28288.073927] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [28288.073933] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [28288.073938] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [28288.074311] ata3.00: configured for UDMA/133 [28288.080231] ata5: SATA link down (SStatus 0 SControl 300) [28288.088311] sd 2:0:0:0: [sda] Starting disk [28288.124462] usb 1-1.3: reset full-speed USB device number 3 using ehci-pci [28288.288614] usb 1-1.4: reset full-speed USB device number 4 using ehci-pci [28288.383185] btusb 1-1.4:1.0: no reset_resume for driver btusb? [28288.383189] btusb 1-1.4:1.1: no reset_resume for driver btusb? [28288.452579] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci [28288.555248] PM: resume of devices complete after 806.316 msecs [28288.769357] PM: Finishing wakeup. [28288.772208] Restarting tasks ... done. [28288.781185] video LNXVIDEO:00: Restoring backlight state [28289.088547] mmc0: new high speed SD card at address b1f3 [28289.096956] mmcblk0: mmc0:b1f3 SD01G 982 MiB [28289.105281] mmcblk0: p1 [28289.312624] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [28289.427056] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [28289.528762] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [28289.529569] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [28289.533280] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [28289.533473] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [28289.619796] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [28289.678831] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [28514.672894] ehci-pci 0000:00:1a.0: setting latency timer to 64 [28514.776896] ehci-pci 0000:00:1d.0: setting latency timer to 64 [28514.792687] e1000e 0000:00:19.0: setting latency timer to 64 [28514.792748] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [28514.960829] Bluetooth: hci0 ACL packet for unknown connection handle 11 [28515.697387] hid-generic 0005:09DA:80F0.0008: unknown main item tag 0x0 [28515.697746] input: Bluetooth Mouse V1 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0/hci0:11/input25 [28515.698177] hid-generic 0005:09DA:80F0.0008: input,hidraw0: BLUETOOTH HID v0.1e Keyboard [Bluetooth Mouse V1] on 7c:e9:d3:b4:f4:38 [28637.906913] wlan0: authenticate with 08:76:ff:15:f4:81 [28637.910065] wlan0: send auth to 08:76:ff:15:f4:81 (try 1/3) [28637.912196] wlan0: authenticated [28637.912509] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [28637.912518] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [28637.913414] wlan0: associate with 08:76:ff:15:f4:81 (try 1/3) [28637.916081] wlan0: RX AssocResp from 08:76:ff:15:f4:81 (capab=0x411 status=0 aid=1) [28637.924554] wlan0: associated [28637.924616] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [28777.425939] ehci-pci 0000:00:1a.0: setting latency timer to 64 [28777.529774] ehci-pci 0000:00:1d.0: setting latency timer to 64 [29416.156597] ehci-pci 0000:00:1a.0: setting latency timer to 64 [29416.260527] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30696.472304] wlan0: deauthenticating from 08:76:ff:15:f4:81 by local choice (reason=3) [30696.493526] cfg80211: Calling CRDA to update world regulatory domain [30696.500403] cfg80211: World regulatory domain updated: [30696.500405] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [30696.500407] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [30696.500409] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [30696.500410] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [30696.500412] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [30696.500413] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [30696.908442] ehci-pci 0000:00:1a.0: setting latency timer to 64 [30697.165807] PM: Syncing filesystems ... done. [30697.220547] PM: Preparing system for mem sleep [30697.221155] mmc0: card b1f3 removed [30697.224179] Freezing user space processes ... (elapsed 0.001 seconds) done. [30697.225964] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [30697.227323] PM: Entering mem sleep [30697.227481] Suspending console(s) (use no_console_suspend to debug) [30697.328529] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30697.526588] sd 2:0:0:0: [sda] Synchronizing SCSI cache [30697.526692] sd 2:0:0:0: [sda] Stopping disk [30697.808686] mei_me 0000:00:16.0: suspend [30698.096488] PM: suspend of devices complete after 767.528 msecs [30698.096591] PM: late suspend of devices complete after 0.101 msecs [30698.112489] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [30698.128619] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [30698.144388] e1000e 0000:00:19.0: System wakeup enabled by ACPI [30698.176382] PM: noirq suspend of devices complete after 79.766 msecs [30698.177271] ACPI: Preparing to enter system sleep state S3 [30698.181721] PM: Saving platform NVS memory [30698.184932] Disabling non-boot CPUs ... [30698.288352] smpboot: CPU 1 is now offline [30698.392376] smpboot: CPU 2 is now offline [30698.393224] Broke affinity for irq 23 [30698.393229] Broke affinity for irq 41 [30698.496401] smpboot: CPU 3 is now offline [30698.500229] ACPI: Low-level resume complete [30698.500310] PM: Restoring platform NVS memory [30698.502417] Enabling non-boot CPUs ... [30698.502503] smpboot: Booting Node 0 Processor 1 APIC 0x1 [30698.513433] Initializing CPU#1 [30698.513961] Disabled fast string operations [30698.545939] CPU1 is up [30698.545997] smpboot: Booting Node 0 Processor 2 APIC 0x2 [30698.556824] Initializing CPU#2 [30698.556967] Disabled fast string operations [30698.589958] CPU2 is up [30698.590009] smpboot: Booting Node 0 Processor 3 APIC 0x3 [30698.600833] Initializing CPU#3 [30698.600975] Disabled fast string operations [30698.633962] CPU3 is up [30698.644587] ACPI: Waking up from system sleep state S3 [30698.793955] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [30698.825957] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [30698.874098] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz. [30698.874234] PM: noirq resume of devices complete after 159.613 msecs [30698.874527] PM: early resume of devices complete after 0.239 msecs [30698.874584] i915 0000:00:02.0: setting latency timer to 64 [30698.874634] e1000e 0000:00:19.0: System wakeup disabled by ACPI [30698.874646] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X [30698.874656] e1000e 0000:00:19.0: setting latency timer to 64 [30698.874824] ahci 0000:00:1f.2: setting latency timer to 64 [30698.875210] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [30698.875220] ehci-pci 0000:00:1a.0: setting latency timer to 64 [30698.875596] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [30698.875678] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30698.888393] [drm] Wrong MCH_SSKPD value: 0x16040307 [30698.888395] [drm] This can cause pipe underruns and display issues. [30698.888397] [drm] Please upgrade your BIOS to fix this. [30698.925980] tpm_tis 00:09: TPM is disabled/deactivated (0x6) [30699.086227] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci [30699.214035] ata5: SATA link down (SStatus 0 SControl 300) [30699.214065] ata2: SATA link down (SStatus 0 SControl 300) [30699.222037] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [30699.222525] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [30699.222532] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [30699.222537] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [30699.223302] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [30699.223308] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [30699.223313] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [30699.223558] ata3.00: configured for UDMA/133 [30699.238127] sd 2:0:0:0: [sda] Starting disk [30699.250266] usb 1-1.3: reset full-speed USB device number 3 using ehci-pci [30699.414307] usb 1-1.4: reset full-speed USB device number 4 using ehci-pci [30699.508314] btusb 1-1.4:1.0: no reset_resume for driver btusb? [30699.508317] btusb 1-1.4:1.1: no reset_resume for driver btusb? [30699.578334] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci [30699.680180] PM: resume of devices complete after 805.430 msecs [30699.895197] PM: Finishing wakeup. [30699.918701] Restarting tasks ... done. [30699.937108] video LNXVIDEO:00: Restoring backlight state [30700.237198] mmc0: new high speed SD card at address b1f3 [30700.237359] mmcblk0: mmc0:b1f3 SD01G 982 MiB [30700.238439] mmcblk0: p1 [30700.451787] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [30700.531217] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [30700.566412] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [30700.634485] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [30700.634914] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [30700.638119] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [30700.638337] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [30700.723754] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [30707.139666] wlan0: authenticate with 08:76:ff:15:f4:81 [30707.142661] wlan0: send auth to 08:76:ff:15:f4:81 (try 1/3) [30707.144777] wlan0: authenticated [30707.145281] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [30707.145294] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [30707.148122] wlan0: associate with 08:76:ff:15:f4:81 (try 1/3) [30707.150764] wlan0: RX AssocResp from 08:76:ff:15:f4:81 (capab=0x411 status=0 aid=1) [30707.157420] wlan0: associated [30707.157488] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [30807.009196] ehci-pci 0000:00:1a.0: setting latency timer to 64 [30807.113182] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30807.128965] e1000e 0000:00:19.0: setting latency timer to 64 [30807.129030] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [30887.946356] ehci-pci 0000:00:1a.0: setting latency timer to 64 [30888.050326] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30925.456157] wlan0: deauthenticating from 08:76:ff:15:f4:81 by local choice (reason=3) [30925.475735] cfg80211: Calling CRDA to update world regulatory domain [30925.483327] cfg80211: World regulatory domain updated: [30925.483337] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [30925.483343] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [30925.483348] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [30925.483352] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [30925.483357] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [30925.483361] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [30925.889550] ehci-pci 0000:00:1a.0: setting latency timer to 64 [30926.163380] PM: Syncing filesystems ... done. [30926.203850] PM: Preparing system for mem sleep [30926.204548] mmc0: card b1f3 removed [30926.207886] Freezing user space processes ... (elapsed 0.001 seconds) done. [30926.209168] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [30926.210391] PM: Entering mem sleep [30926.210432] Suspending console(s) (use no_console_suspend to debug) [30926.313251] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30926.509253] sd 2:0:0:0: [sda] Synchronizing SCSI cache [30926.509362] sd 2:0:0:0: [sda] Stopping disk [30926.789473] mei_me 0000:00:16.0: suspend [30926.827108] PM: suspend of devices complete after 513.895 msecs [30926.827200] PM: late suspend of devices complete after 0.090 msecs [30926.841042] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [30926.857192] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [30926.872939] e1000e 0000:00:19.0: System wakeup enabled by ACPI [30926.904919] PM: noirq suspend of devices complete after 77.731 msecs [30926.905809] ACPI: Preparing to enter system sleep state S3 [30926.910232] PM: Saving platform NVS memory [30926.913420] Disabling non-boot CPUs ... [30927.016856] smpboot: CPU 1 is now offline [30927.120824] smpboot: CPU 2 is now offline [30927.224804] smpboot: CPU 3 is now offline [30927.228664] ACPI: Low-level resume complete [30927.228743] PM: Restoring platform NVS memory [30927.230840] Enabling non-boot CPUs ... [30927.230919] smpboot: Booting Node 0 Processor 1 APIC 0x1 [30927.241849] Initializing CPU#1 [30927.242375] Disabled fast string operations [30927.274290] CPU1 is up [30927.274338] smpboot: Booting Node 0 Processor 2 APIC 0x2 [30927.285164] Initializing CPU#2 [30927.285307] Disabled fast string operations [30927.318271] CPU2 is up [30927.318316] smpboot: Booting Node 0 Processor 3 APIC 0x3 [30927.329140] Initializing CPU#3 [30927.329283] Disabled fast string operations [30927.362257] CPU3 is up [30927.373011] ACPI: Waking up from system sleep state S3 [30927.522177] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [30927.554178] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [30927.602338] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz. [30927.602508] PM: noirq resume of devices complete after 159.783 msecs [30927.602800] PM: early resume of devices complete after 0.248 msecs [30927.602849] i915 0000:00:02.0: setting latency timer to 64 [30927.602901] e1000e 0000:00:19.0: System wakeup disabled by ACPI [30927.602920] e1000e 0000:00:19.0: setting latency timer to 64 [30927.602979] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X [30927.603152] ehci-pci 0000:00:1a.0: setting latency timer to 64 [30927.603435] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [30927.603585] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X [30927.603709] ehci-pci 0000:00:1d.0: setting latency timer to 64 [30927.603764] ahci 0000:00:1f.2: setting latency timer to 64 [30927.618221] [drm] Wrong MCH_SSKPD value: 0x16040307 [30927.618223] [drm] This can cause pipe underruns and display issues. [30927.618225] [drm] Please upgrade your BIOS to fix this. [30927.650103] tpm_tis 00:09: TPM is disabled/deactivated (0x6) [30927.814228] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci [30927.938038] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [30927.938682] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [30927.938689] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [30927.938694] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [30927.939753] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [30927.939759] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [30927.939764] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [30927.940118] ata3.00: configured for UDMA/133 [30927.950042] ata2: SATA link down (SStatus 0 SControl 300) [30927.954042] ata5: SATA link down (SStatus 0 SControl 300) [30927.954167] sd 2:0:0:0: [sda] Starting disk [30927.978112] usb 1-1.3: reset full-speed USB device number 3 using ehci-pci [30928.142157] usb 1-1.4: reset full-speed USB device number 4 using ehci-pci [30928.236070] btusb 1-1.4:1.0: no reset_resume for driver btusb? [30928.236074] btusb 1-1.4:1.1: no reset_resume for driver btusb? [30928.306092] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci [30928.407987] PM: resume of devices complete after 805.367 msecs [30928.659503] PM: Finishing wakeup. [30928.718027] Restarting tasks ... done. [30928.749838] video LNXVIDEO:00: Restoring backlight state [30929.051130] mmc0: new high speed SD card at address b1f3 [30929.054490] mmcblk0: mmc0:b1f3 SD01G 982 MiB [30929.057147] mmcblk0: p1 [30929.275282] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [30929.392565] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X [30929.493847] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X [30929.494228] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [30929.496677] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [30929.496924] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [30929.549660] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [30929.592406] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [30936.032997] wlan0: authenticate with 08:76:ff:15:f4:81 [30936.038249] wlan0: send auth to 08:76:ff:15:f4:81 (try 1/3) [30936.040136] wlan0: authenticated [30936.040539] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [30936.040552] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [30936.044143] wlan0: associate with 08:76:ff:15:f4:81 (try 1/3) [30936.046837] wlan0: RX AssocResp from 08:76:ff:15:f4:81 (capab=0x411 status=0 aid=2) [30936.053333] wlan0: associated [30936.053395] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [31406.976460] mmc0: card b1f3 removed [31981.989073] e1000e 0000:00:19.0: setting latency timer to 64 [31981.989099] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X [31982.343211] wlan0: deauthenticating from 08:76:ff:15:f4:81 by local choice (reason=3) [31982.360257] cfg80211: Calling CRDA to update world regulatory domain [31982.369267] cfg80211: World regulatory domain updated: [31982.369271] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [31982.369274] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [31982.369276] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [31982.369278] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [31982.369280] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [31982.369282] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [31982.773683] ehci-pci 0000:00:1a.0: setting latency timer to 64 [31983.046414] PM: Syncing filesystems ... done. [31983.091884] PM: Preparing system for mem sleep [31983.092284] Freezing user space processes ... (elapsed 0.001 seconds) done. [31983.094064] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [31983.095395] PM: Entering mem sleep [31983.095553] Suspending console(s) (use no_console_suspend to debug) [31983.197756] ehci-pci 0000:00:1d.0: setting latency timer to 64 [31983.396944] sd 2:0:0:0: [sda] Synchronizing SCSI cache [31983.397026] sd 2:0:0:0: [sda] Stopping disk [31983.673976] mei_me 0000:00:16.0: suspend [31983.711542] PM: suspend of devices complete after 513.439 msecs [31983.711640] PM: late suspend of devices complete after 0.095 msecs [31983.725667] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [31983.741937] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [31983.757575] e1000e 0000:00:19.0: System wakeup enabled by ACPI [31983.789569] PM: noirq suspend of devices complete after 77.903 msecs [31983.790448] ACPI: Preparing to enter system sleep state S3 [31983.794837] PM: Saving platform NVS memory [31983.797871] Disabling non-boot CPUs ... [31983.901535] smpboot: CPU 1 is now offline [31984.005562] smpboot: CPU 2 is now offline [31984.006451] Broke affinity for irq 23 [31984.006455] Broke affinity for irq 41 [31984.109587] smpboot: CPU 3 is now offline [31984.113462] ACPI: Low-level resume complete [31984.113540] PM: Restoring platform NVS memory [31984.115651] Enabling non-boot CPUs ... [31984.115736] smpboot: Booting Node 0 Processor 1 APIC 0x1 [31984.126666] Initializing CPU#1 [31984.127193] Disabled fast string operations [31984.159143] CPU1 is up [31984.159191] smpboot: Booting Node 0 Processor 2 APIC 0x2 [31984.170017] Initializing CPU#2 [31984.170161] Disabled fast string operations [31984.203143] CPU2 is up [31984.203189] smpboot: Booting Node 0 Processor 3 APIC 0x3 [31984.214012] Initializing CPU#3 [31984.214155] Disabled fast string operations [31984.247151] CPU3 is up [31984.257903] ACPI: Waking up from system sleep state S3 [31984.407147] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [31984.439148] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [31984.487380] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz. [31984.487520] PM: noirq resume of devices complete after 159.707 msecs [31984.487813] PM: early resume of devices complete after 0.238 msecs [31984.487892] i915 0000:00:02.0: setting latency timer to 64 [31984.487918] e1000e 0000:00:19.0: System wakeup disabled by ACPI [31984.487937] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X [31984.487946] e1000e 0000:00:19.0: setting latency timer to 64 [31984.488011] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [31984.488238] ahci 0000:00:1f.2: setting latency timer to 64 [31984.488257] ehci-pci 0000:00:1a.0: setting latency timer to 64 [31984.488726] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [31984.489083] ehci-pci 0000:00:1d.0: setting latency timer to 64 [31984.496932] [drm] Wrong MCH_SSKPD value: 0x16040307 [31984.496933] [drm] This can cause pipe underruns and display issues. [31984.496935] [drm] Please upgrade your BIOS to fix this. [31984.539149] tpm_tis 00:09: TPM is disabled/deactivated (0x6) [31984.699439] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci [31984.823225] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [31984.823734] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [31984.823740] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [31984.823745] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [31984.824829] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [31984.824836] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [31984.824841] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [31984.825396] ata3.00: configured for UDMA/133 [31984.831219] ata2: SATA link down (SStatus 0 SControl 300) [31984.839234] ata5: SATA link down (SStatus 0 SControl 300) [31984.855298] sd 2:0:0:0: [sda] Starting disk [31984.863341] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci [31985.031397] usb 1-1.4: reset full-speed USB device number 4 using ehci-pci [31985.125527] btusb 1-1.4:1.0: no reset_resume for driver btusb? [31985.125531] btusb 1-1.4:1.1: no reset_resume for driver btusb? [31985.195405] usb 1-1.3: reset full-speed USB device number 3 using ehci-pci [31985.288312] PM: resume of devices complete after 800.275 msecs [31985.519281] PM: Finishing wakeup. [31985.519285] Restarting tasks ... done. [31985.542287] video LNXVIDEO:00: Restoring backlight state [31985.899474] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [31986.043748] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [31986.147633] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [31986.147993] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [31986.149785] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [31986.149981] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [31986.240743] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [31992.766505] wlan0: authenticate with 08:76:ff:15:f4:81 [31992.769498] wlan0: send auth to 08:76:ff:15:f4:81 (try 1/3) [31992.771593] wlan0: authenticated [31992.771680] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [31992.771684] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [31992.773320] wlan0: associate with 08:76:ff:15:f4:81 (try 1/3) [31992.776931] wlan0: RX AssocResp from 08:76:ff:15:f4:81 (capab=0x411 status=0 aid=1) [31992.784374] wlan0: associated [31992.784438] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [32323.268818] wlan0: deauthenticating from 08:76:ff:15:f4:81 by local choice (reason=3) [32323.286913] cfg80211: Calling CRDA to update world regulatory domain [32323.297352] cfg80211: World regulatory domain updated: [32323.297356] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [32323.297358] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [32323.297361] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [32323.297363] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [32323.297365] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [32323.297367] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [32323.670839] PM: Syncing filesystems ... done. [32323.698416] PM: Preparing system for mem sleep [32323.698721] Freezing user space processes ... (elapsed 0.073 seconds) done. [32323.772556] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [32323.774029] PM: Entering mem sleep [32323.774204] Suspending console(s) (use no_console_suspend to debug) [32323.876304] ehci-pci 0000:00:1d.0: setting latency timer to 64 [32324.071672] sd 2:0:0:0: [sda] Synchronizing SCSI cache [32324.071770] sd 2:0:0:0: [sda] Stopping disk [32324.352441] mei_me 0000:00:16.0: suspend [32324.656030] PM: suspend of devices complete after 779.809 msecs [32324.656377] PM: late suspend of devices complete after 0.342 msecs [32324.672083] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [32324.688249] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [32324.703908] e1000e 0000:00:19.0: System wakeup enabled by ACPI [32324.735887] PM: noirq suspend of devices complete after 79.524 msecs [32324.736767] ACPI: Preparing to enter system sleep state S3 [32324.741148] PM: Saving platform NVS memory [32324.744396] Disabling non-boot CPUs ... [32324.847784] smpboot: CPU 1 is now offline [32324.951789] smpboot: CPU 2 is now offline [32324.952610] Broke affinity for irq 23 [32324.952614] Broke affinity for irq 41 [32325.055770] smpboot: CPU 3 is now offline [32325.059640] ACPI: Low-level resume complete [32325.059722] PM: Restoring platform NVS memory [32325.061825] Enabling non-boot CPUs ... [32325.061913] smpboot: Booting Node 0 Processor 1 APIC 0x1 [32325.072858] Initializing CPU#1 [32325.073386] Disabled fast string operations [32325.105269] CPU1 is up [32325.105318] smpboot: Booting Node 0 Processor 2 APIC 0x2 [32325.116144] Initializing CPU#2 [32325.116288] Disabled fast string operations [32325.149245] CPU2 is up [32325.149292] smpboot: Booting Node 0 Processor 3 APIC 0x3 [32325.160116] Initializing CPU#3 [32325.160257] Disabled fast string operations [32325.193233] CPU3 is up [32325.204002] ACPI: Waking up from system sleep state S3 [32325.353152] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [32325.385137] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [32325.433236] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz. [32325.433377] PM: noirq resume of devices complete after 159.618 msecs [32325.433669] PM: early resume of devices complete after 0.238 msecs [32325.433744] i915 0000:00:02.0: setting latency timer to 64 [32325.433784] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X [32325.445141] e1000e 0000:00:19.0: System wakeup disabled by ACPI [32325.445165] e1000e 0000:00:19.0: setting latency timer to 64 [32325.445229] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [32325.445422] ehci-pci 0000:00:1a.0: setting latency timer to 64 [32325.445730] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [32325.445997] ahci 0000:00:1f.2: setting latency timer to 64 [32325.446492] [drm] Wrong MCH_SSKPD value: 0x16040307 [32325.446494] [drm] This can cause pipe underruns and display issues. [32325.446496] [drm] Please upgrade your BIOS to fix this. [32325.453274] ehci-pci 0000:00:1d.0: setting latency timer to 64 [32325.489091] tpm_tis 00:09: TPM is disabled/deactivated (0x6) [32325.657171] usb 1-1.4: reset full-speed USB device number 4 using ehci-pci [32325.751176] btusb 1-1.4:1.0: no reset_resume for driver btusb? [32325.751180] btusb 1-1.4:1.1: no reset_resume for driver btusb? [32325.789016] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [32325.789048] ata2: SATA link down (SStatus 0 SControl 300) [32325.789502] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [32325.789508] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [32325.789513] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [32325.790326] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [32325.790332] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [32325.790337] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [32325.790646] ata3.00: configured for UDMA/133 [32325.797012] ata5: SATA link down (SStatus 0 SControl 300) [32325.805401] sd 2:0:0:0: [sda] Starting disk [32325.821217] usb 1-1.3: reset full-speed USB device number 3 using ehci-pci [32325.985119] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci [32326.153053] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci [32326.248561] PM: resume of devices complete after 815.073 msecs [32326.451610] PM: Finishing wakeup. [32326.476849] Restarting tasks ... done. [32326.497214] video LNXVIDEO:00: Restoring backlight state [32326.832733] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [32327.118014] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [32327.220741] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [32327.221126] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [32327.224299] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [32327.224497] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [32327.307138] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [32333.738042] wlan0: authenticate with 08:76:ff:15:f4:81 [32333.743613] wlan0: send auth to 08:76:ff:15:f4:81 (try 1/3) [32333.745723] wlan0: authenticated [32333.746037] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [32333.746049] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [32333.747262] wlan0: associate with 08:76:ff:15:f4:81 (try 1/3) [32333.749831] wlan0: RX AssocResp from 08:76:ff:15:f4:81 (capab=0x411 status=0 aid=1) [32333.754674] wlan0: associated [32333.754715] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [32954.114973] multiqueue0:src[13035]: segfault at 0 ip a24140bb sp a37fe860 error 4 in libavcodec.so.53.35.0[a20f9000+65a000] [33344.936651] e1000e 0000:00:19.0: setting latency timer to 64 [33344.936714] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [33345.311813] wlan0: deauthenticating from 08:76:ff:15:f4:81 by local choice (reason=3) [33345.331504] cfg80211: Calling CRDA to update world regulatory domain [33345.336823] cfg80211: World regulatory domain updated: [33345.336827] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [33345.336830] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [33345.336832] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [33345.336834] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [33345.336836] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [33345.336838] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [33345.729045] ehci-pci 0000:00:1a.0: setting latency timer to 64 [33345.996619] PM: Syncing filesystems ... done. [33346.041884] PM: Preparing system for mem sleep [33346.042221] Freezing user space processes ... (elapsed 0.001 seconds) done. [33346.043958] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [33346.044802] PM: Entering mem sleep [33346.044859] Suspending console(s) (use no_console_suspend to debug) [33346.148967] ehci-pci 0000:00:1d.0: setting latency timer to 64 [33346.357743] sd 2:0:0:0: [sda] Synchronizing SCSI cache [33346.357844] sd 2:0:0:0: [sda] Stopping disk [33346.637271] mei_me 0000:00:16.0: suspend [33346.675223] PM: suspend of devices complete after 526.040 msecs [33346.675314] PM: late suspend of devices complete after 0.089 msecs [33346.689031] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [33346.705162] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [33346.720934] e1000e 0000:00:19.0: System wakeup enabled by ACPI [33346.752928] PM: noirq suspend of devices complete after 77.589 msecs [33346.753816] ACPI: Preparing to enter system sleep state S3 [33346.758195] PM: Saving platform NVS memory [33346.761279] Disabling non-boot CPUs ... [33346.864892] smpboot: CPU 1 is now offline [33346.968921] smpboot: CPU 2 is now offline [33346.969787] Broke affinity for irq 23 [33346.969792] Broke affinity for irq 41 [33347.072945] smpboot: CPU 3 is now offline [33347.076815] ACPI: Low-level resume complete [33347.076893] PM: Restoring platform NVS memory [33347.078998] Enabling non-boot CPUs ... [33347.079084] smpboot: Booting Node 0 Processor 1 APIC 0x1 [33347.090003] Initializing CPU#1 [33347.090728] Disabled fast string operations [33347.122492] CPU1 is up [33347.122542] smpboot: Booting Node 0 Processor 2 APIC 0x2 [33347.133367] Initializing CPU#2 [33347.133511] Disabled fast string operations [33347.166492] CPU2 is up [33347.166536] smpboot: Booting Node 0 Processor 3 APIC 0x3 [33347.177459] Initializing CPU#3 [33347.177603] Disabled fast string operations [33347.210502] CPU3 is up [33347.221270] ACPI: Waking up from system sleep state S3 [33347.370495] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [33347.402498] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [33347.450647] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz. [33347.450784] PM: noirq resume of devices complete after 159.635 msecs [33347.451065] PM: early resume of devices complete after 0.237 msecs [33347.451140] i915 0000:00:02.0: setting latency timer to 64 [33347.451179] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X [33347.451412] ahci 0000:00:1f.2: setting latency timer to 64 [33347.451706] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [33347.451828] ehci-pci 0000:00:1d.0: setting latency timer to 64 [33347.451943] e1000e 0000:00:19.0: System wakeup disabled by ACPI [33347.451962] e1000e 0000:00:19.0: setting latency timer to 64 [33347.451988] ehci-pci 0000:00:1a.0: setting latency timer to 64 [33347.452077] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [33347.460022] [drm] Wrong MCH_SSKPD value: 0x16040307 [33347.460023] [drm] This can cause pipe underruns and display issues. [33347.460025] [drm] Please upgrade your BIOS to fix this. [33347.502530] tpm_tis 00:09: TPM is disabled/deactivated (0x6) [33347.662705] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci [33347.794579] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [33347.794612] ata5: SATA link down (SStatus 0 SControl 300) [33347.795187] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [33347.795193] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [33347.795198] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [33347.796269] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [33347.796275] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [33347.796280] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [33347.796636] ata3.00: configured for UDMA/133 [33347.806553] ata2: SATA link down (SStatus 0 SControl 300) [33347.810671] sd 2:0:0:0: [sda] Starting disk [33347.826753] usb 1-1.3: reset full-speed USB device number 3 using ehci-pci [33347.990795] usb 1-1.4: reset full-speed USB device number 4 using ehci-pci [33348.084928] btusb 1-1.4:1.0: no reset_resume for driver btusb? [33348.084932] btusb 1-1.4:1.1: no reset_resume for driver btusb? [33348.154822] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci [33348.256766] PM: resume of devices complete after 805.478 msecs [33348.499317] PM: Finishing wakeup. [33348.505113] Restarting tasks ... done. [33348.547572] video LNXVIDEO:00: Restoring backlight state [33348.834838] init: anacron main process (13772) killed by TERM signal [33349.099924] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [33349.102949] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [33349.203140] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [33349.203632] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [33349.207339] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [33349.207556] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [33349.298822] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [33355.663700] wlan0: authenticate with 08:76:ff:15:f4:81 [33355.666982] wlan0: send auth to 08:76:ff:15:f4:81 (try 1/3) [33355.669107] wlan0: authenticated [33355.669222] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [33355.669224] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [33355.672793] wlan0: associate with 08:76:ff:15:f4:81 (try 1/3) [33355.675383] wlan0: RX AssocResp from 08:76:ff:15:f4:81 (capab=0x411 status=0 aid=1) [33355.681459] wlan0: associated [33355.681521] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [34141.572264] e1000e 0000:00:19.0: setting latency timer to 64 [34141.572301] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [34141.601329] thinkpad_acpi: EC reports that Thermal Table has changed [34141.880704] ehci-pci 0000:00:1a.0: setting latency timer to 64 [34164.597285] Bluetooth: hci0 ACL packet for unknown connection handle 11 [34165.343643] hid-generic 0005:09DA:80F0.0009: unknown main item tag 0x0 [34165.344210] input: Bluetooth Mouse V1 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0/hci0:11/input26 [34165.344648] hid-generic 0005:09DA:80F0.0009: input,hidraw0: BLUETOOTH HID v0.1e Keyboard [Bluetooth Mouse V1] on 7c:e9:d3:b4:f4:38 [34806.329177] [drm] stuck on render ring [34806.329308] [drm:i915_set_reset_status] *ERROR* render ring hung inside bo (0x6f74000 ctx 1) at 0x6f741d8 [36047.663987] type=1400 audit(1386476469.258:44): apparmor="STATUS" operation="profile_replace" parent=16256 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=16260 comm="apparmor_parser" [36047.664033] type=1400 audit(1386476469.258:45): apparmor="STATUS" operation="profile_replace" parent=16256 profile="unconfined" name="/usr/sbin/cupsd" pid=16260 comm="apparmor_parser" [36047.665330] type=1400 audit(1386476469.258:46): apparmor="STATUS" operation="profile_replace" parent=16256 profile="unconfined" name="/usr/sbin/cupsd" pid=16260 comm="apparmor_parser" [37385.992044] [drm] stuck on render ring [37385.992198] [drm:i915_set_reset_status] *ERROR* render ring hung inside bo (0x90d4000 ctx 1) at 0x90d41d8 [39363.542590] [drm] stuck on render ring [39363.542721] [drm:i915_set_reset_status] *ERROR* render ring hung inside bo (0x4763000 ctx 1) at 0x4763500 [41313.702227] ehci-pci 0000:00:1d.0: setting latency timer to 64 [41313.926161] usb 2-1.1: new full-speed USB device number 7 using ehci-pci [41314.019591] usb 2-1.1: New USB device found, idVendor=041e, idProduct=30d3 [41314.019602] usb 2-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=2 [41314.019609] usb 2-1.1: SerialNumber: 130506000195 [41314.042505] input: HID 041e:30d3 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.3/input/input27 [41314.042836] hid-generic 0003:041E:30D3.000A: input,hidraw1: USB HID v1.00 Device [HID 041e:30d3] on usb-0000:00:1d.0-1.1/input3 [41949.511716] thinkpad_acpi: EC reports that Thermal Table has changed [42197.457464] ehci-pci 0000:00:1a.0: setting latency timer to 64 [42197.473283] e1000e 0000:00:19.0: setting latency timer to 64 [42197.473347] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [43571.923614] thinkpad_acpi: EC reports that Thermal Table has changed [43572.023560] ehci-pci 0000:00:1a.0: setting latency timer to 64 [45180.124574] hid-generic 0005:09DA:80F0.000B: unknown main item tag 0x0 [45180.125059] input: Bluetooth Mouse V1 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0/hci0:11/input28 [45180.127310] hid-generic 0005:09DA:80F0.000B: input,hidraw0: BLUETOOTH HID v0.1e Keyboard [Bluetooth Mouse V1] on 7c:e9:d3:b4:f4:38 [46437.526909] input: CC:C5:0A:5F:9C:F2 as /devices/virtual/input/input29 [46488.038975] usb 2-1.1: USB disconnect, device number 7 [46497.735455] input: CC:C5:0A:5F:9C:F2 as /devices/virtual/input/input30 [46924.955033] mmc0: new high speed SDHC card at address aaaa [46924.955449] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [46924.967103] mmcblk0: p1 [46950.729402] hid-generic 0005:09DA:80F0.000C: unknown main item tag 0x0 [46950.729656] input: Bluetooth Mouse V1 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0/hci0:13/input31 [46950.735260] hid-generic 0005:09DA:80F0.000C: input,hidraw0: BLUETOOTH HID v0.1e Keyboard [Bluetooth Mouse V1] on 7c:e9:d3:b4:f4:38 [46974.077698] mmc0: card aaaa removed [46974.090483] FAT-fs (mmcblk0p1): unable to read boot sector to mark fs as dirty [47792.838367] hid-generic 0005:09DA:80F0.000D: unknown main item tag 0x0 [47792.838477] input: Bluetooth Mouse V1 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0/hci0:12/input32 [47792.839746] hid-generic 0005:09DA:80F0.000D: input,hidraw0: BLUETOOTH HID v0.1e Keyboard [Bluetooth Mouse V1] on 7c:e9:d3:b4:f4:38 [47798.166816] input: CC:C5:0A:5F:9C:F2 as /devices/virtual/input/input33