[ 25.272903] vboxdrv: fAsync=0 offMin=0x1a1 offMax=0xfbc [ 25.272955] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 25.272957] vboxdrv: Successfully loaded version 4.3.0 (interface 0x001a0005). [ 25.479084] vboxpci: IOMMU not found (not registered) [ 26.396871] ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95) [ 26.396936] ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95) [ 26.396978] ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95) [ 26.397018] ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95) [ 26.397057] ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95) [ 26.416972] ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95) [ 26.417140] ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95) [ 26.417182] ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95) [ 26.417225] ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95) [ 26.744561] ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95) [ 28.412488] Ebtables v2.0 registered [ 28.526947] ip_tables: (C) 2000-2006 Netfilter Core Team [ 28.530596] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 28.960647] Bridge firewalling registered [ 29.026709] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 29.035513] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready [ 31.133636] init: anacron main process (1238) killed by TERM signal [ 52.878141] hidraw: raw HID events driver (C) Jiri Kosina [ 53.030537] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 53.030547] Bluetooth: HIDP socket layer initialized [ 865.812977] psmouse serio1: GlidePoint at isa0060/serio1/input0 lost sync at byte 6 [ 865.823074] psmouse serio1: GlidePoint at isa0060/serio1/input0 - driver resynced. [ 865.834087] psmouse serio1: GlidePoint at isa0060/serio1/input0 lost sync at byte 6 [ 865.843181] psmouse serio1: GlidePoint at isa0060/serio1/input0 - driver resynced. [ 865.853286] psmouse serio1: GlidePoint at isa0060/serio1/input0 lost sync at byte 6 [ 865.863664] psmouse serio1: GlidePoint at isa0060/serio1/input0 - driver resynced. [ 865.874188] psmouse serio1: GlidePoint at isa0060/serio1/input0 lost sync at byte 6 [ 865.883742] psmouse serio1: GlidePoint at isa0060/serio1/input0 - driver resynced. [ 865.894219] psmouse serio1: GlidePoint at isa0060/serio1/input0 lost sync at byte 6 [ 865.905246] psmouse serio1: GlidePoint at isa0060/serio1/input0 - driver resynced. [ 1977.045275] e1000e 0000:00:19.0: setting latency timer to 64 [ 1977.045324] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 1977.493568] init: anacron main process (4539) killed by TERM signal [ 1980.331251] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 1980.432076] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 1980.432182] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 1980.432996] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 1980.439889] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 1980.175779] PM: Syncing filesystems ... done. [ 1980.531094] PM: Preparing system for mem sleep [ 1980.535899] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1980.531354] Freezing user space processes ... (elapsed 0.007 seconds) done. [ 1980.538695] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 1980.539785] PM: Entering mem sleep [ 1980.539832] Suspending console(s) (use no_console_suspend to debug) [ 1980.579232] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1980.596761] mei_me 0000:00:16.0: suspend [ 1980.681033] sd 0:0:0:0: [sda] Stopping disk [ 1981.083969] PM: suspend of devices complete after 544.219 msecs [ 1981.084114] PM: late suspend of devices complete after 0.143 msecs [ 1981.099876] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 1981.116048] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 1981.163762] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 1981.179763] PM: noirq suspend of devices complete after 95.677 msecs [ 1981.179952] ACPI: Preparing to enter system sleep state S3 [ 1981.224845] PM: Saving platform NVS memory [ 1981.225503] Disabling non-boot CPUs ... [ 1981.327668] smpboot: CPU 1 is now offline [ 1981.431638] smpboot: CPU 2 is now offline [ 1981.535602] smpboot: CPU 3 is now offline [ 1981.639570] smpboot: CPU 4 is now offline [ 1981.639930] Broke affinity for irq 42 [ 1981.743539] smpboot: CPU 5 is now offline [ 1981.743911] Broke affinity for irq 16 [ 1981.847505] smpboot: CPU 6 is now offline [ 1981.847858] Broke affinity for irq 21 [ 1981.847861] Broke affinity for irq 44 [ 1981.951469] smpboot: CPU 7 is now offline [ 1981.953144] ACPI: Low-level resume complete [ 1981.953192] PM: Restoring platform NVS memory [ 1981.953754] CPU0: Thermal monitoring handled by SMI [ 1981.953865] Enabling non-boot CPUs ... [ 1981.953900] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 1981.965191] CPU1: Thermal monitoring handled by SMI [ 1981.967623] CPU1 is up [ 1981.967640] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 1981.978943] CPU2: Thermal monitoring handled by SMI [ 1981.981404] CPU2 is up [ 1981.981420] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 1981.992737] CPU3: Thermal monitoring handled by SMI [ 1981.995206] CPU3 is up [ 1981.995223] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 1982.006534] CPU4: Thermal monitoring handled by SMI [ 1982.008962] CPU4 is up [ 1982.008976] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 1982.020258] CPU5: Thermal monitoring handled by SMI [ 1982.022590] CPU5 is up [ 1982.022604] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 1982.033898] CPU6: Thermal monitoring handled by SMI [ 1982.036316] CPU6 is up [ 1982.036330] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 1982.047631] CPU7: Thermal monitoring handled by SMI [ 1982.050068] CPU7 is up [ 1982.056840] ACPI: Waking up from system sleep state S3 [ 1982.105924] ACPI: \_SB_.PCI0: ACPI_NOTIFY_BUS_CHECK event: unsupported [ 1982.105927] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root [ 1982.153438] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 1982.213413] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 1982.245422] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 1982.261440] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 1982.309617] PM: noirq resume of devices complete after 176.220 msecs [ 1982.309726] PM: early resume of devices complete after 0.088 msecs [ 1982.309760] e1000e 0000:00:19.0: setting latency timer to 64 [ 1982.309762] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 1982.309796] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X [ 1982.309797] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 1982.309801] ahci 0000:00:1f.2: setting latency timer to 64 [ 1982.309858] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 1982.309989] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 1982.310106] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 1982.310446] mei_me 0000:00:16.0: we can't read the message slots =00000000. [ 1982.521393] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci [ 1982.685332] usb 1-1.5: reset high-speed USB device number 4 using ehci-pci [ 1982.829497] dpm_run_callback(): pnp_bus_resume+0x0/0x80 returns -19 [ 1982.829501] PM: Device 00:09 failed to resume: error -19 [ 1983.073197] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1983.285422] ata6: SATA link down (SStatus 0 SControl 300) [ 1983.285498] ata5: SATA link down (SStatus 0 SControl 300) [ 1983.337320] ata2.00: configured for UDMA/100 [ 1984.236858] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1984.239606] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1984.239612] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1984.239616] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1984.240019] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 1984.245009] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1984.245015] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1984.245019] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1984.245422] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 1984.247439] ata1.00: configured for UDMA/133 [ 1984.268945] sd 0:0:0:0: [sda] Starting disk [ 1984.295570] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 1984.302050] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 1984.438555] PM: resume of devices complete after 2129.496 msecs [ 1984.439150] PM: Finishing wakeup. [ 1984.439665] usb 3-1: USB disconnect, device number 3 [ 1984.439874] rndis_host 3-1:1.0 usb0: unregister 'rndis_host' usb-0000:00:14.0-1, RNDIS device [ 1984.439153] Restarting tasks ... done. [ 1984.464358] video LNXVIDEO:00: Restoring backlight state [ 1984.631954] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 1984.638497] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 1984.749277] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1985.959115] init: anacron main process (5013) killed by TERM signal [ 2021.025289] e1000e 0000:00:19.0: setting latency timer to 64 [ 2021.025348] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 2452.421142] wlan0: authenticate with 0a:18:1a:36:0b:1a [ 2452.463776] wlan0: send auth to 0a:18:1a:36:0b:1a (try 1/3) [ 2452.465090] wlan0: authenticated [ 2452.467124] wlan0: associate with 0a:18:1a:36:0b:1a (try 1/3) [ 2452.468454] wlan0: RX AssocResp from 0a:18:1a:36:0b:1a (capab=0x411 status=0 aid=11) [ 2452.474749] wlan0: associated [ 2452.474823] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2452.475021] cfg80211: Calling CRDA for country: AU [ 2452.480786] cfg80211: Regulatory domain changed to country: AU [ 2452.480793] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2452.480798] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 2452.480802] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 2452.480805] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 2452.480808] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 2452.499114] wlan0: Limiting TX power to 17 (17 - 0) dBm as advertised by 0a:18:1a:36:0b:1a [ 2625.097566] wlan0: authenticate with 0a:18:0a:36:0b:1a [ 2625.158450] wlan0: send auth to 0a:18:0a:36:0b:1a (try 1/3) [ 2625.158784] cfg80211: Calling CRDA to update world regulatory domain [ 2625.165028] cfg80211: World regulatory domain updated: [ 2625.165036] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2625.165041] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2625.165044] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2625.165048] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2625.165051] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2625.165054] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2625.178747] wlan0: authenticated [ 2625.179102] wlan0: waiting for beacon from 0a:18:0a:36:0b:1a [ 2625.252249] wlan0: associate with 0a:18:0a:36:0b:1a (try 1/3) [ 2625.568113] wlan0: associate with 0a:18:0a:36:0b:1a (try 2/3) [ 2625.763766] wlan0: RX AssocResp from 0a:18:0a:36:0b:1a (capab=0x31 status=0 aid=13) [ 2625.770222] wlan0: associated [ 2625.770494] cfg80211: Calling CRDA for country: AU [ 2625.770789] wlan0: deauthenticating from 0a:18:0a:36:0b:1a by local choice (reason=2) [ 2625.774367] wlan0: authenticate with 0a:18:0a:36:0d:e4 [ 2625.822875] wlan0: send auth to 0a:18:0a:36:0d:e4 (try 1/3) [ 2625.822996] cfg80211: Calling CRDA to update world regulatory domain [ 2625.830664] cfg80211: World regulatory domain updated: [ 2625.830674] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2625.830681] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2625.830687] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2625.830693] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2625.830698] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2625.830704] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2625.865888] wlan0: authenticated [ 2629.039145] wlan0: authenticate with 0a:18:0a:36:0d:e4 [ 2629.043483] wlan0: send auth to 0a:18:0a:36:0d:e4 (try 1/3) [ 2629.046508] wlan0: authenticated [ 2629.047041] wlan0: associate with 0a:18:0a:36:0d:e4 (try 1/3) [ 2629.051658] wlan0: RX AssocResp from 0a:18:0a:36:0d:e4 (capab=0x31 status=0 aid=7) [ 2629.066912] wlan0: associated [ 2629.067116] cfg80211: Calling CRDA for country: AU [ 2629.072682] cfg80211: Regulatory domain changed to country: AU [ 2629.072689] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2629.072694] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 2629.072698] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 2629.072701] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 2629.072704] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 3798.620674] audit_printk_skb: 111 callbacks suppressed [ 3798.620682] type=1400 audit(1383175252.100:49): apparmor="STATUS" operation="profile_replace" parent=7305 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=7309 comm="apparmor_parser" [ 3798.620700] type=1400 audit(1383175252.100:50): apparmor="STATUS" operation="profile_replace" parent=7305 profile="unconfined" name="/usr/sbin/cupsd" pid=7309 comm="apparmor_parser" [ 3798.622229] type=1400 audit(1383175252.104:51): apparmor="STATUS" operation="profile_replace" parent=7305 profile="unconfined" name="/usr/sbin/cupsd" pid=7309 comm="apparmor_parser" [11686.132525] perf samples too long (2515 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [12049.320661] wlan0: authenticate with 0a:18:1a:36:0d:e4 [12049.355496] wlan0: send auth to 0a:18:1a:36:0d:e4 (try 1/3) [12049.355783] cfg80211: Calling CRDA to update world regulatory domain [12049.361510] cfg80211: World regulatory domain updated: [12049.361517] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [12049.361522] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [12049.361526] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [12049.361529] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [12049.361532] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [12049.361536] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [12049.451965] wlan0: authenticated [12049.456396] wlan0: associate with 0a:18:1a:36:0d:e4 (try 1/3) [12049.676225] wlan0: associate with 0a:18:1a:36:0d:e4 (try 2/3) [12049.756033] wlan0: RX AssocResp from 0a:18:1a:36:0d:e4 (capab=0x411 status=0 aid=7) [12049.759845] wlan0: associated [12049.760012] wlan0: Limiting TX power to 17 (17 - 0) dBm as advertised by 0a:18:1a:36:0d:e4 [12049.760348] cfg80211: Calling CRDA for country: AU [12049.760522] wlan0: deauthenticating from 0a:18:1a:36:0d:e4 by local choice (reason=2) [12049.763240] wlan0: authenticate with 0a:18:0a:36:0d:e4 [12049.815012] wlan0: send auth to 0a:18:0a:36:0d:e4 (try 1/3) [12049.815198] cfg80211: Calling CRDA to update world regulatory domain [12049.821967] cfg80211: World regulatory domain updated: [12049.821977] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [12049.821985] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [12049.821991] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [12049.821996] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [12049.822001] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [12049.822007] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [12049.848718] wlan0: authenticated [12052.911541] wlan0: authenticate with 0a:18:0a:36:0d:e4 [12052.917571] wlan0: send auth to 0a:18:0a:36:0d:e4 (try 1/3) [12052.920163] wlan0: authenticated [12052.923220] wlan0: associate with 0a:18:0a:36:0d:e4 (try 1/3) [12052.929824] wlan0: RX AssocResp from 0a:18:0a:36:0d:e4 (capab=0x31 status=0 aid=3) [12052.944210] wlan0: associated [12052.944352] cfg80211: Calling CRDA for country: AU [12052.950539] cfg80211: Regulatory domain changed to country: AU [12052.950546] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [12052.950550] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [12052.950554] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [12052.950558] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [12052.950561] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [12890.776071] wlan0: authenticate with 0a:18:1a:31:f9:9c [12890.817866] wlan0: send auth to 0a:18:1a:31:f9:9c (try 1/3) [12890.818195] cfg80211: Calling CRDA to update world regulatory domain [12890.823984] cfg80211: World regulatory domain updated: [12890.823991] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [12890.823995] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [12890.823999] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [12890.824003] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [12890.824006] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [12890.824009] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [12891.019243] wlan0: send auth to 0a:18:1a:31:f9:9c (try 2/3) [12891.026756] wlan0: authenticated [12891.115455] wlan0: authenticate with 0a:18:0a:36:0d:e4 [12891.171189] wlan0: send auth to 0a:18:0a:36:0d:e4 (try 1/3) [12891.178075] wlan0: authenticated [12891.179182] wlan0: associate with 0a:18:0a:36:0d:e4 (try 1/3) [12891.190294] wlan0: RX AssocResp from 0a:18:0a:36:0d:e4 (capab=0x31 status=0 aid=3) [12891.202772] wlan0: associated [12891.202924] cfg80211: Calling CRDA for country: AU [12891.207998] cfg80211: Regulatory domain changed to country: AU [12891.208005] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [12891.208009] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [12891.208013] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [12891.208017] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [12891.208020] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [15168.663614] wlan0: authenticate with 0a:18:0a:31:f9:9c [15168.716350] wlan0: send auth to 0a:18:0a:31:f9:9c (try 1/3) [15168.720365] cfg80211: Calling CRDA to update world regulatory domain [15168.726911] cfg80211: World regulatory domain updated: [15168.726919] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [15168.726924] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [15168.726928] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [15168.726931] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [15168.726934] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [15168.726937] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [15168.861461] wlan0: send auth to 0a:18:0a:31:f9:9c (try 2/3) [15168.880916] wlan0: authenticated [15171.865035] wlan0: authenticate with 0a:18:1a:31:a9:4c [15171.907346] wlan0: send auth to 0a:18:1a:31:a9:4c (try 1/3) [15172.128420] wlan0: send auth to 0a:18:1a:31:a9:4c (try 2/3) [15172.151263] wlan0: authenticated [15172.151676] wlan0: waiting for beacon from 0a:18:1a:31:a9:4c [15175.301497] wlan0: authenticate with 0a:18:0a:36:0b:1a [15175.356563] wlan0: send auth to 0a:18:0a:36:0b:1a (try 1/3) [15175.358386] wlan0: authenticated [15175.359394] wlan0: associate with 0a:18:0a:36:0b:1a (try 1/3) [15175.364687] wlan0: RX AssocResp from 0a:18:0a:36:0b:1a (capab=0x31 status=0 aid=12) [15175.378841] wlan0: associated [15175.379001] cfg80211: Calling CRDA for country: AU [15175.384912] cfg80211: Regulatory domain changed to country: AU [15175.384920] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [15175.384924] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [15175.384928] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [15175.384932] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [15175.384935] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [15408.386590] wlan0: authenticate with 0a:18:1a:36:0b:1a [15408.428462] wlan0: send auth to 0a:18:1a:36:0b:1a (try 1/3) [15408.428680] cfg80211: Calling CRDA to update world regulatory domain [15408.429773] wlan0: authenticated [15408.430143] wlan0: associate with 0a:18:1a:36:0b:1a (try 1/3) [15408.431278] wlan0: RX AssocResp from 0a:18:1a:36:0b:1a (capab=0x411 status=0 aid=12) [15408.434942] wlan0: associated [15408.435553] cfg80211: World regulatory domain updated: [15408.435560] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [15408.435565] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [15408.435569] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [15408.435572] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [15408.435575] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [15408.435578] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [15408.435619] cfg80211: Calling CRDA for country: AU [15408.442801] cfg80211: Regulatory domain changed to country: AU [15408.442810] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [15408.442817] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [15408.442823] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [15408.442829] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [15408.442835] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [15408.512923] wlan0: Limiting TX power to 17 (17 - 0) dBm as advertised by 0a:18:1a:36:0b:1a [15526.858160] wlan0: authenticate with 0a:18:0a:36:0b:1a [15526.913890] wlan0: send auth to 0a:18:0a:36:0b:1a (try 1/3) [15526.914162] cfg80211: Calling CRDA to update world regulatory domain [15526.920974] cfg80211: World regulatory domain updated: [15526.920984] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [15526.920991] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [15526.920997] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [15526.921003] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [15526.921009] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [15526.921014] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [15526.922360] wlan0: authenticated [15526.922658] wlan0: waiting for beacon from 0a:18:0a:36:0b:1a [15527.307036] wlan0: authenticate with 0a:18:1a:36:0b:1a [15527.342761] wlan0: send auth to 0a:18:1a:36:0b:1a (try 1/3) [15527.344448] wlan0: authenticated [15527.707529] wlan0: authenticate with 0a:18:0a:36:0d:e4 [15527.765193] wlan0: send auth to 0a:18:0a:36:0d:e4 (try 1/3) [15527.768429] wlan0: authenticated [15527.772616] wlan0: associate with 0a:18:0a:36:0d:e4 (try 1/3) [15527.776882] wlan0: RX AssocResp from 0a:18:0a:36:0d:e4 (capab=0x31 status=0 aid=7) [15527.788347] wlan0: associated [15527.788472] cfg80211: Calling CRDA for country: AU [15527.793460] cfg80211: Regulatory domain changed to country: AU [15527.793467] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [15527.793471] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [15527.793475] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [15527.793478] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [15527.793482] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [18617.061692] wlan0: deauthenticating from 0a:18:0a:36:0d:e4 by local choice (reason=3) [18617.104228] cfg80211: Calling CRDA to update world regulatory domain [18617.106674] cfg80211: World regulatory domain updated: [18617.106678] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [18617.106679] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18617.106681] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18617.106682] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [18617.106683] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18617.106684] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [18617.057734] PM: Syncing filesystems ... done. [18617.293739] PM: Preparing system for mem sleep [18617.293940] Freezing user space processes ... (elapsed 0.006 seconds) done. [18617.300658] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [18617.301828] PM: Entering mem sleep [18617.301887] Suspending console(s) (use no_console_suspend to debug) [18617.302075] sd 0:0:0:0: [sda] Synchronizing SCSI cache [18617.325593] mei_me 0000:00:16.0: suspend [18617.420593] sd 0:0:0:0: [sda] Stopping disk [18617.836387] PM: suspend of devices complete after 534.560 msecs [18617.836532] PM: late suspend of devices complete after 0.143 msecs [18617.852489] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [18617.868640] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [18617.892352] e1000e 0000:00:19.0: System wakeup enabled by ACPI [18617.924348] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [18617.940355] PM: noirq suspend of devices complete after 103.853 msecs [18617.940598] ACPI: Preparing to enter system sleep state S3 [18617.981589] PM: Saving platform NVS memory [18617.982375] Disabling non-boot CPUs ... [18618.084249] smpboot: CPU 1 is now offline [18618.188211] smpboot: CPU 2 is now offline [18618.292169] smpboot: CPU 3 is now offline [18618.396136] smpboot: CPU 4 is now offline [18618.396566] Broke affinity for irq 16 [18618.396568] Broke affinity for irq 21 [18618.396572] Broke affinity for irq 44 [18618.500103] smpboot: CPU 5 is now offline [18618.604075] smpboot: CPU 6 is now offline [18618.604497] Broke affinity for irq 42 [18618.708047] smpboot: CPU 7 is now offline [18618.710415] ACPI: Low-level resume complete [18618.710483] PM: Restoring platform NVS memory [18618.711187] CPU0: Thermal monitoring handled by SMI [18618.711298] Enabling non-boot CPUs ... [18618.711363] smpboot: Booting Node 0 Processor 1 APIC 0x2 [18618.723118] CPU1: Thermal monitoring handled by SMI [18618.725951] CPU1 is up [18618.725986] smpboot: Booting Node 0 Processor 2 APIC 0x4 [18618.737767] CPU2: Thermal monitoring handled by SMI [18618.740639] CPU2 is up [18618.740674] smpboot: Booting Node 0 Processor 3 APIC 0x6 [18618.752467] CPU3: Thermal monitoring handled by SMI [18618.755326] CPU3 is up [18618.755359] smpboot: Booting Node 0 Processor 4 APIC 0x1 [18618.767115] CPU4: Thermal monitoring handled by SMI [18618.769801] CPU4 is up [18618.769829] smpboot: Booting Node 0 Processor 5 APIC 0x3 [18618.781564] CPU5: Thermal monitoring handled by SMI [18618.784262] CPU5 is up [18618.784289] smpboot: Booting Node 0 Processor 6 APIC 0x5 [18618.796051] CPU6: Thermal monitoring handled by SMI [18618.798715] CPU6 is up [18618.798743] smpboot: Booting Node 0 Processor 7 APIC 0x7 [18618.810520] CPU7: Thermal monitoring handled by SMI [18618.813326] CPU7 is up [18618.827409] ACPI: Waking up from system sleep state S3 [18618.875569] ACPI: \_SB_.PCI0: ACPI_NOTIFY_BUS_CHECK event: unsupported [18618.875576] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root [18618.922809] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [18618.978822] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [18619.010806] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [18619.026857] nvidia 0000:01:00.0: power state changed by ACPI to D0 [18619.075060] PM: noirq resume of devices complete after 172.284 msecs [18619.075270] PM: early resume of devices complete after 0.176 msecs [18619.075330] xhci_hcd 0000:00:14.0: setting latency timer to 64 [18619.075376] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X [18619.075413] ahci 0000:00:1f.2: setting latency timer to 64 [18619.075637] ehci-pci 0000:00:1a.0: setting latency timer to 64 [18619.075883] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [18619.075947] ehci-pci 0000:00:1d.0: setting latency timer to 64 [18619.076258] mei_me 0000:00:16.0: we can't read the message slots =00000002. [18619.286830] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci [18619.450763] usb 1-1.5: reset high-speed USB device number 4 using ehci-pci [18619.531166] e1000e 0000:00:19.0: System wakeup disabled by ACPI [18619.531187] e1000e 0000:00:19.0: setting latency timer to 64 [18619.531245] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [18619.866556] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [18619.906835] ata6: SATA link down (SStatus 0 SControl 300) [18619.906968] ata5: SATA link down (SStatus 0 SControl 300) [18619.946753] ata2.00: configured for UDMA/100 [18620.418648] dpm_run_callback(): pnp_bus_resume+0x0/0x80 returns -19 [18620.418652] PM: Device 00:09 failed to resume: error -19 [18620.970199] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [18620.985053] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [18620.985059] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [18620.985063] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [18620.985432] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [18620.990390] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [18620.990396] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [18620.990399] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [18620.990775] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [18620.992574] ata1.00: configured for UDMA/133 [18621.006390] sd 0:0:0:0: [sda] Starting disk [18621.038231] PM: resume of devices complete after 1963.568 msecs [18621.038731] PM: Finishing wakeup. [18621.038735] Restarting tasks ... done. [18621.059604] video LNXVIDEO:00: Restoring backlight state [18621.240247] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [18621.342168] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [18621.342374] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [18621.345164] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [18621.351699] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [18621.487554] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [19091.358171] usb 3-2: new high-speed USB device number 4 using xhci_hcd [19091.381525] usb 3-2: New USB device found, idVendor=04e8, idProduct=6860 [19091.381535] usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [19091.381540] usb 3-2: Product: GT-I9210T [19091.381544] usb 3-2: Manufacturer: samsung [19091.381548] usb 3-2: SerialNumber: de1a33ee [19091.805412] cdc_acm 3-2:1.1: This device cannot do calls on its own. It is not a modem. [19091.805557] cdc_acm 3-2:1.1: ttyACM0: USB ACM device [19091.806829] usbcore: registered new interface driver cdc_acm [19091.806836] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [19094.414323] usb 3-2: USB disconnect, device number 4 [19094.689087] usb 3-2: new high-speed USB device number 5 using xhci_hcd [19094.710357] usb 3-2: New USB device found, idVendor=04e8, idProduct=6864 [19094.710367] usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [19094.710372] usb 3-2: Product: GT-I9210T [19094.710376] usb 3-2: Manufacturer: samsung [19094.710380] usb 3-2: SerialNumber: de1a33ee [19094.717836] rndis_host 3-2:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-2, RNDIS device, 02:57:00:54:61:33 [20907.482495] PM: Syncing filesystems ... done. [20907.681175] PM: Preparing system for mem sleep [20907.681431] Freezing user space processes ... (elapsed 0.039 seconds) done. [20907.721401] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [20907.722558] PM: Entering mem sleep [20907.722630] Suspending console(s) (use no_console_suspend to debug) [20907.722822] sd 0:0:0:0: [sda] Synchronizing SCSI cache [20907.723084] sd 0:0:0:0: [sda] Stopping disk [20907.737563] mei_me 0000:00:16.0: suspend [20908.143001] PM: suspend of devices complete after 420.387 msecs [20908.143163] PM: late suspend of devices complete after 0.158 msecs [20908.159057] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [20908.175215] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [20908.198903] e1000e 0000:00:19.0: System wakeup enabled by ACPI [20908.230897] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [20908.246921] PM: noirq suspend of devices complete after 103.788 msecs [20908.247160] ACPI: Preparing to enter system sleep state S3 [20908.292152] PM: Saving platform NVS memory [20908.292961] Disabling non-boot CPUs ... [20908.394785] smpboot: CPU 1 is now offline [20908.498756] smpboot: CPU 2 is now offline [20908.602723] smpboot: CPU 3 is now offline [20908.706685] smpboot: CPU 4 is now offline [20908.707095] Broke affinity for irq 16 [20908.707097] Broke affinity for irq 21 [20908.810666] smpboot: CPU 5 is now offline [20908.811095] Broke affinity for irq 44 [20908.914661] smpboot: CPU 6 is now offline [20909.018585] smpboot: CPU 7 is now offline [20909.020080] ACPI: Low-level resume complete [20909.020122] PM: Restoring platform NVS memory [20909.020641] CPU0: Thermal monitoring handled by SMI [20909.020709] Enabling non-boot CPUs ... [20909.020750] smpboot: Booting Node 0 Processor 1 APIC 0x2 [20909.032016] CPU1: Thermal monitoring handled by SMI [20909.034434] CPU1 is up [20909.034451] smpboot: Booting Node 0 Processor 2 APIC 0x4 [20909.045728] CPU2: Thermal monitoring handled by SMI [20909.048092] CPU2 is up [20909.048108] smpboot: Booting Node 0 Processor 3 APIC 0x6 [20909.059395] CPU3: Thermal monitoring handled by SMI [20909.061862] CPU3 is up [20909.061877] smpboot: Booting Node 0 Processor 4 APIC 0x1 [20909.073143] CPU4: Thermal monitoring handled by SMI [20909.075477] CPU4 is up [20909.075491] smpboot: Booting Node 0 Processor 5 APIC 0x3 [20909.086749] CPU5: Thermal monitoring handled by SMI [20909.089092] CPU5 is up [20909.089104] smpboot: Booting Node 0 Processor 6 APIC 0x5 [20909.100373] CPU6: Thermal monitoring handled by SMI [20909.102705] CPU6 is up [20909.102718] smpboot: Booting Node 0 Processor 7 APIC 0x7 [20909.113994] CPU7: Thermal monitoring handled by SMI [20909.116342] CPU7 is up [20909.122754] ACPI: Waking up from system sleep state S3 [20909.172712] ACPI: \_SB_.PCI0: ACPI_NOTIFY_BUS_CHECK event: unsupported [20909.172715] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root [20909.220268] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [20909.280245] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [20909.312277] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [20909.328309] nvidia 0000:01:00.0: power state changed by ACPI to D0 [20909.376462] PM: noirq resume of devices complete after 176.222 msecs [20909.376559] PM: early resume of devices complete after 0.077 msecs [20909.376587] xhci_hcd 0000:00:14.0: setting latency timer to 64 [20909.376610] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X [20909.376618] ahci 0000:00:1f.2: setting latency timer to 64 [20909.376705] ehci-pci 0000:00:1a.0: setting latency timer to 64 [20909.376778] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [20909.376864] ehci-pci 0000:00:1d.0: setting latency timer to 64 [20909.588205] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci [20909.752142] usb 1-1.5: reset high-speed USB device number 4 using ehci-pci [20909.832304] e1000e 0000:00:19.0: System wakeup disabled by ACPI [20909.832320] e1000e 0000:00:19.0: setting latency timer to 64 [20909.832340] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [20910.180028] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [20910.224225] ata5: SATA link down (SStatus 0 SControl 300) [20910.224280] ata6: SATA link down (SStatus 0 SControl 300) [20910.268077] ata2.00: configured for UDMA/100 [20910.704019] dpm_run_callback(): pnp_bus_resume+0x0/0x80 returns -19 [20910.704020] PM: Device 00:09 failed to resume: error -19 [20911.175638] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [20911.196575] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [20911.196580] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [20911.196582] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [20911.196869] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [20911.201194] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [20911.201198] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [20911.201201] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [20911.201505] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [20911.203321] ata1.00: configured for UDMA/133 [20911.227784] sd 0:0:0:0: [sda] Starting disk [20911.261052] PM: resume of devices complete after 1885.083 msecs [20911.261213] PM: Finishing wakeup. [20911.261214] Restarting tasks ... done. [20911.265697] video LNXVIDEO:00: Restoring backlight state [20911.331652] usb 2-1.7: new high-speed USB device number 3 using ehci-pci [20911.423877] usb 2-1.7: New USB device found, idVendor=413c, idProduct=2513 [20911.423879] usb 2-1.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [20911.424148] hub 2-1.7:1.0: USB hub found [20911.424244] hub 2-1.7:1.0: 3 ports detected [20911.425242] usb 3-2: USB disconnect, device number 5 [20911.425266] rndis_host 3-2:1.0 usb0: unregister 'rndis_host' usb-0000:00:14.0-2, RNDIS device [20911.437852] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [20911.539532] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [20911.539638] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [20911.541071] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [20911.547535] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [20911.665760] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [20911.831432] usb 3-4: new high-speed USB device number 6 using xhci_hcd [20911.847588] usb 3-4: New USB device found, idVendor=413c, idProduct=2513 [20911.847591] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [20911.847844] hub 3-4:1.0: USB hub found [20911.847900] hub 3-4:1.0: 3 ports detected [20911.919464] usb 2-1.7.3: new full-speed USB device number 4 using ehci-pci [20912.014550] usb 2-1.7.3: New USB device found, idVendor=1532, idProduct=010d [20912.014553] usb 2-1.7.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [20912.014554] usb 2-1.7.3: Product: Razer BlackWidow Ultimate [20912.014555] usb 2-1.7.3: Manufacturer: Razer [20912.437666] usbcore: registered new interface driver usbhid [20912.437668] usbhid: USB HID core driver [20912.559028] input: Razer Razer BlackWidow Ultimate as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.3/2-1.7.3:1.0/input/input18 [20912.559142] hid-generic 0003:1532:010D.0001: input,hidraw0: USB HID v1.11 Keyboard [Razer Razer BlackWidow Ultimate] on usb-0000:00:1d.0-1.7.3/input0 [20912.561192] input: Razer Razer BlackWidow Ultimate as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.3/2-1.7.3:1.1/input/input19 [20912.561366] hid-generic 0003:1532:010D.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer BlackWidow Ultimate] on usb-0000:00:1d.0-1.7.3/input1 [20912.562531] input: Razer Razer BlackWidow Ultimate as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.3/2-1.7.3:1.2/input/input20 [20912.563087] hid-generic 0003:1532:010D.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer BlackWidow Ultimate] on usb-0000:00:1d.0-1.7.3/input2 [20914.511659] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [20914.511691] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [20918.114609] wlan0: authenticate with 00:04:ed:ef:9d:49 [20918.170216] wlan0: send auth to 00:04:ed:ef:9d:49 (try 1/3) [20918.172033] wlan0: authenticated [20918.172084] wlan0: waiting for beacon from 00:04:ed:ef:9d:49 [20918.225421] wlan0: associate with 00:04:ed:ef:9d:49 (try 1/3) [20918.228828] wlan0: RX AssocResp from 00:04:ed:ef:9d:49 (capab=0x411 status=0 aid=6) [20918.237541] wlan0: associated [20918.237561] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [21066.882491] hid-generic 0005:045E:0700.0004: unknown main item tag 0x0 [21066.882637] input: Microsoft Bluetooth Notebook Mouse 5000 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0/hci0:11/input21 [21066.883136] hid-generic 0005:045E:0700.0004: input,hidraw3: BLUETOOTH HID v1.00 Mouse [Microsoft Bluetooth Notebook Mouse 5000] on 20:16:d8:9c:38:e5 [23587.116925] wlan0: cannot understand ECSA IE operating class 11, disconnecting [23587.170546] cfg80211: Calling CRDA to update world regulatory domain [23587.175280] cfg80211: World regulatory domain updated: [23587.175286] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [23587.175289] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [23587.175292] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [23587.175295] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [23587.175297] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [23587.175300] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [23590.492038] wlan0: authenticate with 00:04:ed:ef:9d:49 [23590.497681] wlan0: send auth to 00:04:ed:ef:9d:49 (try 1/3) [23590.499547] wlan0: authenticated [23590.501227] wlan0: associate with 00:04:ed:ef:9d:49 (try 1/3) [23590.504848] wlan0: RX AssocResp from 00:04:ed:ef:9d:49 (capab=0x411 status=0 aid=2) [23590.509002] wlan0: associated [29947.907449] hid-generic 0003:1532:010D.0002: can't reset device, 0000:00:1d.0-1.7.3/input1, status -71 [29947.912393] usb 2-1.7: clear tt 3 (0040) error -71 [29947.916520] hid-generic 0003:1532:010D.0001: can't reset device, 0000:00:1d.0-1.7.3/input0, status -71 [29947.920507] usb 2-1.7: clear tt 3 (0040) error -71 [29947.924631] hid-generic 0003:1532:010D.0002: can't reset device, 0000:00:1d.0-1.7.3/input1, status -71 [29947.928635] usb 2-1.7: clear tt 3 (0040) error -71 [29947.932663] hid-generic 0003:1532:010D.0003: can't reset device, 0000:00:1d.0-1.7.3/input2, status -71 [29947.936752] usb 2-1.7: clear tt 3 (0040) error -71 [29947.940888] hid-generic 0003:1532:010D.0001: can't reset device, 0000:00:1d.0-1.7.3/input0, status -71 [29947.944873] usb 2-1.7: clear tt 3 (0040) error -71 [29947.948995] hid-generic 0003:1532:010D.0002: can't reset device, 0000:00:1d.0-1.7.3/input1, status -71 [29947.952995] usb 2-1.7: clear tt 3 (0040) error -71 [29947.957115] hid-generic 0003:1532:010D.0001: can't reset device, 0000:00:1d.0-1.7.3/input0, status -71 [29947.961119] usb 2-1.7: clear tt 3 (0040) error -71 [29947.965136] hid-generic 0003:1532:010D.0003: can't reset device, 0000:00:1d.0-1.7.3/input2, status -71 [29947.969116] usb 2-1.7: clear tt 3 (0040) error -71 [29947.973232] hid-generic 0003:1532:010D.0002: can't reset device, 0000:00:1d.0-1.7.3/input1, status -71 [29947.977239] usb 2-1.7: clear tt 3 (0040) error -71 [29947.981359] hid-generic 0003:1532:010D.0001: can't reset device, 0000:00:1d.0-1.7.3/input0, status -71 [29947.985359] usb 2-1.7: clear tt 3 (0040) error -71 [29947.989378] hid-generic 0003:1532:010D.0003: can't reset device, 0000:00:1d.0-1.7.3/input2, status -71 [29947.993357] usb 2-1.7: clear tt 3 (0040) error -71 [29947.997494] hid-generic 0003:1532:010D.0002: can't reset device, 0000:00:1d.0-1.7.3/input1, status -71 [29948.001477] usb 2-1.7: clear tt 3 (0040) error -71 [29948.005598] hid-generic 0003:1532:010D.0001: can't reset device, 0000:00:1d.0-1.7.3/input0, status -71 [29948.006938] usb 3-4: USB disconnect, device number 6 [29948.009608] usb 2-1.7: clear tt 3 (0040) error -71 [29948.013737] hid-generic 0003:1532:010D.0002: can't reset device, 0000:00:1d.0-1.7.3/input1, status -71 [29948.017730] usb 2-1.7: clear tt 3 (0040) error -71 [29948.021749] hid-generic 0003:1532:010D.0003: can't reset device, 0000:00:1d.0-1.7.3/input2, status -71 [29948.025727] usb 2-1.7: clear tt 3 (0040) error -71 [29948.029869] hid-generic 0003:1532:010D.0001: can't reset device, 0000:00:1d.0-1.7.3/input0, status -71 [29948.033840] usb 2-1.7: clear tt 3 (0040) error -71 [29948.038016] hid-generic 0003:1532:010D.0002: can't reset device, 0000:00:1d.0-1.7.3/input1, status -71 [29948.041966] usb 2-1.7: clear tt 3 (0040) error -71 [29948.046088] hid-generic 0003:1532:010D.0001: can't reset device, 0000:00:1d.0-1.7.3/input0, status -71 [29948.050089] usb 2-1.7: clear tt 3 (0040) error -71 [29948.054108] hid-generic 0003:1532:010D.0003: can't reset device, 0000:00:1d.0-1.7.3/input2, status -71 [29948.058090] usb 2-1.7: clear tt 3 (0040) error -71 [29948.062222] hid-generic 0003:1532:010D.0002: can't reset device, 0000:00:1d.0-1.7.3/input1, status -71 [29948.066208] usb 2-1.7: clear tt 3 (0040) error -71 [29948.070332] hid-generic 0003:1532:010D.0001: can't reset device, 0000:00:1d.0-1.7.3/input0, status -71 [29948.074330] usb 2-1.7: clear tt 3 (0040) error -71 [29948.078450] hid-generic 0003:1532:010D.0002: can't reset device, 0000:00:1d.0-1.7.3/input1, status -71 [29948.082453] usb 2-1.7: clear tt 3 (0040) error -71 [29948.086472] hid-generic 0003:1532:010D.0003: can't reset device, 0000:00:1d.0-1.7.3/input2, status -71 [29948.090453] usb 2-1.7: clear tt 3 (0040) error -71 [29948.094582] hid-generic 0003:1532:010D.0001: can't reset device, 0000:00:1d.0-1.7.3/input0, status -71 [29948.098571] usb 2-1.7: clear tt 3 (0040) error -71 [29948.102721] hid-generic 0003:1532:010D.0002: can't reset device, 0000:00:1d.0-1.7.3/input1, status -71 [29948.106696] usb 2-1.7: clear tt 3 (0040) error -71 [29948.109192] usb 2-1.7: USB disconnect, device number 3 [29948.109197] usb 2-1.7.3: USB disconnect, device number 4 [29948.110696] hid-generic 0003:1532:010D.0001: can't reset device, 0000:00:1d.0-1.7.3/input0, status -71 [29948.114944] hid-generic 0003:1532:010D.0003: can't reset device, 0000:00:1d.0-1.7.3/input2, status -71 [29948.119219] hid-generic 0003:1532:010D.0002: can't reset device, 0000:00:1d.0-1.7.3/input1, status -71 [29948.263207] e1000e: eth0 NIC Link is Down [30032.940473] e1000e 0000:00:19.0: setting latency timer to 64 [30032.940522] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [33822.142735] wlan0: AP 00:04:ed:ef:9d:49 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz) [41825.486146] wlan0: deauthenticating from 00:04:ed:ef:9d:49 by local choice (reason=3) [41825.543748] cfg80211: Calling CRDA to update world regulatory domain [41825.545506] cfg80211: World regulatory domain updated: [41825.545509] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [41825.545510] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [41825.545511] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [41825.545512] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [41825.545513] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [41825.545514] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [41826.122659] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [41825.759911] PM: Syncing filesystems ... done. [41826.162838] PM: Preparing system for mem sleep [41826.224348] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [41826.224479] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [41826.163011] Freezing user space processes ... (elapsed 0.064 seconds) done. [41826.227695] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [41826.228844] PM: Entering mem sleep [41826.228892] Suspending console(s) (use no_console_suspend to debug) [41826.229108] sd 0:0:0:0: [sda] Synchronizing SCSI cache [41826.244610] mei_me 0000:00:16.0: suspend [41826.361557] sd 0:0:0:0: [sda] Stopping disk [41826.776324] PM: suspend of devices complete after 547.501 msecs [41826.776462] PM: late suspend of devices complete after 0.136 msecs [41826.792283] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [41826.808426] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [41826.832127] e1000e 0000:00:19.0: System wakeup enabled by ACPI [41826.864127] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [41826.880169] PM: noirq suspend of devices complete after 103.737 msecs [41826.880358] ACPI: Preparing to enter system sleep state S3 [41826.921312] PM: Saving platform NVS memory [41826.921963] Disabling non-boot CPUs ... [41827.024029] smpboot: CPU 1 is now offline [41827.127988] smpboot: CPU 2 is now offline [41827.231955] smpboot: CPU 3 is now offline [41827.335923] smpboot: CPU 4 is now offline [41827.439887] smpboot: CPU 5 is now offline [41827.440275] Broke affinity for irq 16 [41827.440277] Broke affinity for irq 21 [41827.543856] smpboot: CPU 6 is now offline [41827.544260] Broke affinity for irq 44 [41827.647827] smpboot: CPU 7 is now offline [41827.650187] ACPI: Low-level resume complete [41827.650255] PM: Restoring platform NVS memory [41827.650966] CPU0: Thermal monitoring handled by SMI [41827.651112] Enabling non-boot CPUs ... [41827.651177] smpboot: Booting Node 0 Processor 1 APIC 0x2 [41827.662931] CPU1: Thermal monitoring handled by SMI [41827.665763] CPU1 is up [41827.665798] smpboot: Booting Node 0 Processor 2 APIC 0x4 [41827.677578] CPU2: Thermal monitoring handled by SMI [41827.680471] CPU2 is up [41827.680505] smpboot: Booting Node 0 Processor 3 APIC 0x6 [41827.692300] CPU3: Thermal monitoring handled by SMI [41827.695186] CPU3 is up [41827.695219] smpboot: Booting Node 0 Processor 4 APIC 0x1 [41827.706974] CPU4: Thermal monitoring handled by SMI [41827.709664] CPU4 is up [41827.709692] smpboot: Booting Node 0 Processor 5 APIC 0x3 [41827.721427] CPU5: Thermal monitoring handled by SMI [41827.724116] CPU5 is up [41827.724143] smpboot: Booting Node 0 Processor 6 APIC 0x5 [41827.735906] CPU6: Thermal monitoring handled by SMI [41827.738593] CPU6 is up [41827.738620] smpboot: Booting Node 0 Processor 7 APIC 0x7 [41827.750396] CPU7: Thermal monitoring handled by SMI [41827.753193] CPU7 is up [41827.767261] ACPI: Waking up from system sleep state S3 [41827.811308] ACPI: \_SB_.PCI0: ACPI_NOTIFY_BUS_CHECK event: unsupported [41827.811315] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root [41827.866549] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [41827.922520] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [41827.954547] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [41827.970598] nvidia 0000:01:00.0: power state changed by ACPI to D0 [41828.018804] PM: noirq resume of devices complete after 172.289 msecs [41828.019019] PM: early resume of devices complete after 0.181 msecs [41828.019072] xhci_hcd 0000:00:14.0: setting latency timer to 64 [41828.019122] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X [41828.019161] ahci 0000:00:1f.2: setting latency timer to 64 [41828.019373] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [41828.019605] ehci-pci 0000:00:1d.0: setting latency timer to 64 [41828.019834] ehci-pci 0000:00:1a.0: setting latency timer to 64 [41828.230537] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci [41828.402463] usb 1-1.5: reset high-speed USB device number 4 using ehci-pci [41828.474772] e1000e 0000:00:19.0: System wakeup disabled by ACPI [41828.474786] e1000e 0000:00:19.0: setting latency timer to 64 [41828.474823] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [41828.818289] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [41828.858586] ata5: SATA link down (SStatus 0 SControl 300) [41828.858721] ata6: SATA link down (SStatus 0 SControl 300) [41828.894483] ata2.00: configured for UDMA/100 [41829.358378] dpm_run_callback(): pnp_bus_resume+0x0/0x80 returns -19 [41829.358382] PM: Device 00:09 failed to resume: error -19 [41829.921950] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [41829.924661] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [41829.924667] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [41829.924671] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [41829.925107] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [41829.929931] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [41829.929937] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [41829.929940] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [41829.930281] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [41829.932123] ata1.00: configured for UDMA/133 [41829.946154] sd 0:0:0:0: [sda] Starting disk [41829.976200] PM: resume of devices complete after 1957.781 msecs [41829.976699] PM: Finishing wakeup. [41829.976703] Restarting tasks ... done. [41829.978840] video LNXVIDEO:00: Restoring backlight state [41829.982839] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [41829.997169] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [41830.105983] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [41830.970419] init: anacron main process (19783) killed by TERM signal [41836.671065] wlan0: authenticate with 00:04:ed:ef:9d:49 [41836.687020] wlan0: send auth to 00:04:ed:ef:9d:49 (try 1/3) [41836.688931] wlan0: authenticated [41836.691761] wlan0: associate with 00:04:ed:ef:9d:49 (try 1/3) [41836.695245] wlan0: RX AssocResp from 00:04:ed:ef:9d:49 (capab=0x411 status=0 aid=3) [41836.699452] wlan0: associated [41836.699519] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [45047.268202] e1000e 0000:00:19.0: setting latency timer to 64 [45047.268261] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [45047.611792] init: anacron main process (22016) killed by TERM signal [45050.133857] wlan0: deauthenticating from 00:04:ed:ef:9d:49 by local choice (reason=3) [45050.286351] cfg80211: Calling CRDA to update world regulatory domain [45050.288223] cfg80211: World regulatory domain updated: [45050.288225] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [45050.288227] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [45050.288228] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [45050.288229] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [45050.288230] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [45050.288232] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [45050.129210] PM: Syncing filesystems ... done. [45050.338641] PM: Preparing system for mem sleep [45050.338841] Freezing user space processes ... (elapsed 0.056 seconds) done. [45050.395040] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [45050.396215] PM: Entering mem sleep [45050.396281] Suspending console(s) (use no_console_suspend to debug) [45050.396474] sd 0:0:0:0: [sda] Synchronizing SCSI cache [45050.419956] mei_me 0000:00:16.0: suspend [45050.473749] sd 0:0:0:0: [sda] Stopping disk [45050.894841] PM: suspend of devices complete after 498.612 msecs [45050.894997] PM: late suspend of devices complete after 0.154 msecs [45050.910871] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [45050.927026] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [45050.974736] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [45050.990754] PM: noirq suspend of devices complete after 95.786 msecs [45050.990991] ACPI: Preparing to enter system sleep state S3 [45051.032235] PM: Saving platform NVS memory [45051.033026] Disabling non-boot CPUs ... [45051.134646] smpboot: CPU 1 is now offline [45051.238594] smpboot: CPU 2 is now offline [45051.342557] smpboot: CPU 3 is now offline [45051.446531] smpboot: CPU 4 is now offline [45051.446936] Broke affinity for irq 16 [45051.550490] smpboot: CPU 5 is now offline [45051.550937] Broke affinity for irq 44 [45051.654457] smpboot: CPU 6 is now offline [45051.758436] smpboot: CPU 7 is now offline [45051.759948] ACPI: Low-level resume complete [45051.759990] PM: Restoring platform NVS memory [45051.760508] CPU0: Thermal monitoring handled by SMI [45051.760616] Enabling non-boot CPUs ... [45051.760659] smpboot: Booting Node 0 Processor 1 APIC 0x2 [45051.771927] CPU1: Thermal monitoring handled by SMI [45051.774336] CPU1 is up [45051.774353] smpboot: Booting Node 0 Processor 2 APIC 0x4 [45051.785633] CPU2: Thermal monitoring handled by SMI [45051.787996] CPU2 is up [45051.788012] smpboot: Booting Node 0 Processor 3 APIC 0x6 [45051.799301] CPU3: Thermal monitoring handled by SMI [45051.801765] CPU3 is up [45051.801781] smpboot: Booting Node 0 Processor 4 APIC 0x1 [45051.813048] CPU4: Thermal monitoring handled by SMI [45051.815384] CPU4 is up [45051.815398] smpboot: Booting Node 0 Processor 5 APIC 0x3 [45051.826656] CPU5: Thermal monitoring handled by SMI [45051.828999] CPU5 is up [45051.829012] smpboot: Booting Node 0 Processor 6 APIC 0x5 [45051.840282] CPU6: Thermal monitoring handled by SMI [45051.842615] CPU6 is up [45051.842628] smpboot: Booting Node 0 Processor 7 APIC 0x7 [45051.853903] CPU7: Thermal monitoring handled by SMI [45051.856252] CPU7 is up [45051.862675] ACPI: Waking up from system sleep state S3 [45051.904556] ACPI: \_SB_.PCI0: ACPI_NOTIFY_BUS_CHECK event: unsupported [45051.904559] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root [45051.952105] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [45052.012082] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [45052.044113] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [45052.060144] nvidia 0000:01:00.0: power state changed by ACPI to D0 [45052.108302] PM: noirq resume of devices complete after 176.224 msecs [45052.108401] PM: early resume of devices complete after 0.080 msecs [45052.108429] e1000e 0000:00:19.0: setting latency timer to 64 [45052.108431] xhci_hcd 0000:00:14.0: setting latency timer to 64 [45052.108460] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X [45052.108462] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [45052.108467] ahci 0000:00:1f.2: setting latency timer to 64 [45052.108518] ehci-pci 0000:00:1a.0: setting latency timer to 64 [45052.108598] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [45052.108605] ehci-pci 0000:00:1d.0: setting latency timer to 64 [45052.320043] usb 1-1.5: reset high-speed USB device number 4 using ehci-pci [45052.483995] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci [45052.891865] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [45052.928056] ata5: SATA link down (SStatus 0 SControl 300) [45052.928112] ata6: SATA link down (SStatus 0 SControl 300) [45052.968122] ata2.00: configured for UDMA/100 [45053.435890] dpm_run_callback(): pnp_bus_resume+0x0/0x80 returns -19 [45053.435891] PM: Device 00:09 failed to resume: error -19 [45053.919587] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [45053.921685] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [45053.921690] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [45053.921693] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [45053.922073] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [45053.926189] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [45053.926193] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [45053.926196] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [45053.926540] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [45053.928413] ata1.00: configured for UDMA/133 [45053.943656] sd 0:0:0:0: [sda] Starting disk [45053.971745] PM: resume of devices complete after 1863.931 msecs [45053.971902] PM: Finishing wakeup. [45053.971904] Restarting tasks ... done. [45053.972621] video LNXVIDEO:00: Restoring backlight state [45054.139382] usb 3-4: new high-speed USB device number 7 using xhci_hcd [45054.155507] usb 3-4: New USB device found, idVendor=413c, idProduct=2513 [45054.155510] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [45054.155707] hub 3-4:1.0: USB hub found [45054.155763] hub 3-4:1.0: 3 ports detected [45054.235410] usb 2-1.7: new high-speed USB device number 5 using ehci-pci [45054.327753] usb 2-1.7: New USB device found, idVendor=413c, idProduct=2513 [45054.327756] usb 2-1.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [45054.328038] hub 2-1.7:1.0: USB hub found [45054.328108] hub 2-1.7:1.0: 3 ports detected [45054.459999] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [45054.563290] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [45054.563376] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [45054.564118] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [45054.570572] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [45054.599415] usb 2-1.7.3: new full-speed USB device number 6 using ehci-pci [45054.669371] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [45054.694396] usb 2-1.7.3: New USB device found, idVendor=1532, idProduct=010d [45054.694398] usb 2-1.7.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [45054.694399] usb 2-1.7.3: Product: Razer BlackWidow Ultimate [45054.694400] usb 2-1.7.3: Manufacturer: Razer [45054.695508] input: Razer Razer BlackWidow Ultimate as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.3/2-1.7.3:1.0/input/input22 [45054.695665] hid-generic 0003:1532:010D.0005: input,hidraw0: USB HID v1.11 Keyboard [Razer Razer BlackWidow Ultimate] on usb-0000:00:1d.0-1.7.3/input0 [45054.698812] input: Razer Razer BlackWidow Ultimate as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.3/2-1.7.3:1.1/input/input23 [45054.698938] hid-generic 0003:1532:010D.0006: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer BlackWidow Ultimate] on usb-0000:00:1d.0-1.7.3/input1 [45054.701037] input: Razer Razer BlackWidow Ultimate as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.3/2-1.7.3:1.2/input/input24 [45054.701239] hid-generic 0003:1532:010D.0007: input,hidraw2: USB HID v1.11 Mouse [Razer Razer BlackWidow Ultimate] on usb-0000:00:1d.0-1.7.3/input2 [45054.726943] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [45054.733376] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [45054.848956] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [45057.595433] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [45057.595465] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [45061.373171] wlan0: authenticate with 00:04:ed:ef:9d:49 [45061.387048] wlan0: send auth to 00:04:ed:ef:9d:49 (try 1/3) [45061.388942] wlan0: authenticated [45061.393132] wlan0: associate with 00:04:ed:ef:9d:49 (try 1/3) [45061.397186] wlan0: RX AssocResp from 00:04:ed:ef:9d:49 (capab=0x411 status=0 aid=3) [45061.401363] wlan0: associated [45061.401415] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [45076.217175] mmc0: new high speed SDHC card at address aaaa [45076.236798] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [45076.246296] mmcblk0: p1 [45141.310577] mmc0: card aaaa removed [45141.331823] FAT-fs (mmcblk0p1): unable to read boot sector to mark fs as dirty [45205.604967] hid-generic 0005:045E:0700.0008: unknown main item tag 0x0 [45205.605128] input: Microsoft Bluetooth Notebook Mouse 5000 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0/hci0:11/input25 [45205.605597] hid-generic 0005:045E:0700.0008: input,hidraw3: BLUETOOTH HID v1.00 Mouse [Microsoft Bluetooth Notebook Mouse 5000] on 20:16:d8:9c:38:e5 [47003.605934] type=1400 audit(1383257164.111:52): apparmor="STATUS" operation="profile_replace" parent=24799 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=24803 comm="apparmor_parser" [47003.605941] type=1400 audit(1383257164.111:53): apparmor="STATUS" operation="profile_replace" parent=24799 profile="unconfined" name="/usr/sbin/cupsd" pid=24803 comm="apparmor_parser" [47003.606341] type=1400 audit(1383257164.111:54): apparmor="STATUS" operation="profile_replace" parent=24799 profile="unconfined" name="/usr/sbin/cupsd" pid=24803 comm="apparmor_parser" [53402.718392] hid-generic 0003:1532:010D.0006: can't reset device, 0000:00:1d.0-1.7.3/input1, status -71 [53402.723355] usb 2-1.7: clear tt 3 (0060) error -71 [53402.727481] hid-generic 0003:1532:010D.0005: can't reset device, 0000:00:1d.0-1.7.3/input0, status -71 [53402.731494] usb 2-1.7: clear tt 3 (0060) error -71 [53402.735603] hid-generic 0003:1532:010D.0006: can't reset device, 0000:00:1d.0-1.7.3/input1, status -71 [53402.739616] usb 2-1.7: clear tt 3 (0060) error -71 [53402.743623] hid-generic 0003:1532:010D.0007: can't reset device, 0000:00:1d.0-1.7.3/input2, status -71 [53402.747599] usb 2-1.7: clear tt 3 (0060) error -71 [53402.751862] hid-generic 0003:1532:010D.0005: can't reset device, 0000:00:1d.0-1.7.3/input0, status -71 [53402.755842] usb 2-1.7: clear tt 3 (0060) error -71 [53402.759978] hid-generic 0003:1532:010D.0006: can't reset device, 0000:00:1d.0-1.7.3/input1, status -71 [53402.763970] usb 2-1.7: clear tt 3 (0060) error -71 [53402.768000] hid-generic 0003:1532:010D.0007: can't reset device, 0000:00:1d.0-1.7.3/input2, status -71 [53402.771971] usb 2-1.7: clear tt 3 (0060) error -71 [53402.776111] hid-generic 0003:1532:010D.0005: can't reset device, 0000:00:1d.0-1.7.3/input0, status -71 [53402.780087] usb 2-1.7: clear tt 3 (0060) error -71 [53402.784282] hid-generic 0003:1532:010D.0006: can't reset device, 0000:00:1d.0-1.7.3/input1, status -71 [53402.788209] usb 2-1.7: clear tt 3 (0060) error -71 [53402.792388] hid-generic 0003:1532:010D.0005: can't reset device, 0000:00:1d.0-1.7.3/input0, status -71 [53402.796332] usb 2-1.7: clear tt 3 (0060) error -71 [53402.800381] hid-generic 0003:1532:010D.0007: can't reset device, 0000:00:1d.0-1.7.3/input2, status -71 [53402.804349] usb 2-1.7: clear tt 3 (0060) error -71 [53402.808492] hid-generic 0003:1532:010D.0006: can't reset device, 0000:00:1d.0-1.7.3/input1, status -71 [53402.812496] usb 2-1.7: clear tt 3 (0060) error -71 [53402.815917] usb 3-4: USB disconnect, device number 7 [53402.816636] hid-generic 0003:1532:010D.0005: can't reset device, 0000:00:1d.0-1.7.3/input0, status -71 [53402.820593] usb 2-1.7: clear tt 3 (0060) error -71 [53402.824764] hid-generic 0003:1532:010D.0006: can't reset device, 0000:00:1d.0-1.7.3/input1, status -71 [53402.828727] usb 2-1.7: clear tt 3 (0060) error -71 [53402.832749] hid-generic 0003:1532:010D.0007: can't reset device, 0000:00:1d.0-1.7.3/input2, status -71 [53402.836710] usb 2-1.7: clear tt 3 (0060) error -71 [53402.840815] hid-generic 0003:1532:010D.0005: can't reset device, 0000:00:1d.0-1.7.3/input0, status -71 [53402.844841] usb 2-1.7: clear tt 3 (0060) error -71 [53402.848985] hid-generic 0003:1532:010D.0006: can't reset device, 0000:00:1d.0-1.7.3/input1, status -71 [53402.852938] usb 2-1.7: clear tt 3 (0060) error -71 [53402.856973] hid-generic 0003:1532:010D.0007: can't reset device, 0000:00:1d.0-1.7.3/input2, status -71 [53402.860978] usb 2-1.7: clear tt 3 (0060) error -71 [53402.865053] hid-generic 0003:1532:010D.0005: can't reset device, 0000:00:1d.0-1.7.3/input0, status -71 [53402.869057] usb 2-1.7: clear tt 3 (0060) error -71 [53402.873179] hid-generic 0003:1532:010D.0006: can't reset device, 0000:00:1d.0-1.7.3/input1, status -71 [53402.877183] usb 2-1.7: clear tt 3 (0060) error -71 [53402.881244] hid-generic 0003:1532:010D.0007: can't reset device, 0000:00:1d.0-1.7.3/input2, status -71 [53402.885179] usb 2-1.7: clear tt 3 (0060) error -71 [53402.889296] hid-generic 0003:1532:010D.0005: can't reset device, 0000:00:1d.0-1.7.3/input0, status -71 [53402.893325] usb 2-1.7: clear tt 3 (0060) error -71 [53402.897420] hid-generic 0003:1532:010D.0006: can't reset device, 0000:00:1d.0-1.7.3/input1, status -71 [53402.901467] usb 2-1.7: clear tt 3 (0060) error -71 [53402.905442] hid-generic 0003:1532:010D.0007: can't reset device, 0000:00:1d.0-1.7.3/input2, status -71 [53402.909421] usb 2-1.7: clear tt 3 (0060) error -71 [53402.913537] hid-generic 0003:1532:010D.0005: can't reset device, 0000:00:1d.0-1.7.3/input0, status -71 [53402.917542] usb 2-1.7: clear tt 3 (0060) error -71 [53402.921681] hid-generic 0003:1532:010D.0006: can't reset device, 0000:00:1d.0-1.7.3/input1, status -71 [53402.925664] usb 2-1.7: clear tt 3 (0060) error -71 [53402.929682] hid-generic 0003:1532:010D.0007: can't reset device, 0000:00:1d.0-1.7.3/input2, status -71 [53402.933662] usb 2-1.7: clear tt 3 (0060) error -71 [53402.936283] usb 2-1.7: USB disconnect, device number 5 [53402.936288] usb 2-1.7.3: USB disconnect, device number 6 [53402.937661] hid-generic 0003:1532:010D.0005: can't reset device, 0000:00:1d.0-1.7.3/input0, status -71 [53402.941911] hid-generic 0003:1532:010D.0006: can't reset device, 0000:00:1d.0-1.7.3/input1, status -71 [53403.076230] e1000e: eth0 NIC Link is Down [53416.187791] icmp6_send: no reply to icmp error [53490.400671] perf samples too long (5008 > 5000), lowering kernel.perf_event_max_sample_rate to 25000 [54363.841490] wlan0: AP 00:04:ed:ef:9d:49 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz) [56670.227071] e1000e 0000:00:19.0: setting latency timer to 64 [56670.227118] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [56673.241766] PM: Syncing filesystems ... done. [56673.522005] PM: Preparing system for mem sleep [56673.522282] Freezing user space processes ... (elapsed 0.001 seconds) done. [56673.523661] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [56673.524833] PM: Entering mem sleep [56673.524885] Suspending console(s) (use no_console_suspend to debug) [56673.525009] wlan0: deauthenticating from 00:04:ed:ef:9d:49 by local choice (reason=3) [56673.573350] cfg80211: Calling CRDA to update world regulatory domain [56673.573435] sd 0:0:0:0: [sda] Synchronizing SCSI cache [56673.573755] sd 0:0:0:0: [sda] Stopping disk [56673.588674] mei_me 0000:00:16.0: suspend [56673.993798] PM: suspend of devices complete after 468.958 msecs [56673.993942] PM: late suspend of devices complete after 0.141 msecs [56674.009816] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [56674.025962] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [56674.073666] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [56674.089708] PM: noirq suspend of devices complete after 95.794 msecs [56674.089896] ACPI: Preparing to enter system sleep state S3 [56674.134995] PM: Saving platform NVS memory [56674.135649] Disabling non-boot CPUs ... [56674.237565] smpboot: CPU 1 is now offline [56674.341528] smpboot: CPU 2 is now offline [56674.445489] smpboot: CPU 3 is now offline [56674.549466] smpboot: CPU 4 is now offline [56674.549872] Broke affinity for irq 44 [56674.653432] smpboot: CPU 5 is now offline [56674.653830] Broke affinity for irq 21 [56674.757390] smpboot: CPU 6 is now offline [56674.861363] smpboot: CPU 7 is now offline [56674.863087] ACPI: Low-level resume complete [56674.863135] PM: Restoring platform NVS memory [56674.863696] CPU0: Thermal monitoring handled by SMI [56674.863779] Enabling non-boot CPUs ... [56674.863826] smpboot: Booting Node 0 Processor 1 APIC 0x2 [56674.875117] CPU1: Thermal monitoring handled by SMI [56674.877522] CPU1 is up [56674.877539] smpboot: Booting Node 0 Processor 2 APIC 0x4 [56674.888843] CPU2: Thermal monitoring handled by SMI [56674.891301] CPU2 is up [56674.891326] smpboot: Booting Node 0 Processor 3 APIC 0x6 [56674.902635] CPU3: Thermal monitoring handled by SMI [56674.905100] CPU3 is up [56674.905116] smpboot: Booting Node 0 Processor 4 APIC 0x1 [56674.916420] CPU4: Thermal monitoring handled by SMI [56674.918848] CPU4 is up [56674.918863] smpboot: Booting Node 0 Processor 5 APIC 0x3 [56674.930144] CPU5: Thermal monitoring handled by SMI [56674.932485] CPU5 is up [56674.932499] smpboot: Booting Node 0 Processor 6 APIC 0x5 [56674.943793] CPU6: Thermal monitoring handled by SMI [56674.946216] CPU6 is up [56674.946229] smpboot: Booting Node 0 Processor 7 APIC 0x7 [56674.957531] CPU7: Thermal monitoring handled by SMI [56674.959972] CPU7 is up [56674.966760] ACPI: Waking up from system sleep state S3 [56675.007761] ACPI: \_SB_.PCI0: ACPI_NOTIFY_BUS_CHECK event: unsupported [56675.007764] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root [56675.055321] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [56675.111321] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [56675.143304] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [56675.159321] nvidia 0000:01:00.0: power state changed by ACPI to D0 [56675.207500] PM: noirq resume of devices complete after 172.220 msecs [56675.207609] PM: early resume of devices complete after 0.087 msecs [56675.207642] e1000e 0000:00:19.0: setting latency timer to 64 [56675.207645] xhci_hcd 0000:00:14.0: setting latency timer to 64 [56675.207673] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X [56675.207682] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [56675.207684] ahci 0000:00:1f.2: setting latency timer to 64 [56675.207750] ehci-pci 0000:00:1a.0: setting latency timer to 64 [56675.211324] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [56675.211383] ehci-pci 0000:00:1d.0: setting latency timer to 64 [56675.419275] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci [56675.583212] usb 1-1.5: reset high-speed USB device number 4 using ehci-pci [56675.715371] dpm_run_callback(): pnp_bus_resume+0x0/0x80 returns -19 [56675.715375] PM: Device 00:09 failed to resume: error -19 [56675.959085] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [56676.167367] ata6: SATA link down (SStatus 0 SControl 300) [56676.167444] ata5: SATA link down (SStatus 0 SControl 300) [56676.207228] ata2.00: configured for UDMA/100 [56677.118719] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [56677.123196] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [56677.123201] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [56677.123205] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [56677.123554] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [56677.128488] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [56677.128494] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [56677.128497] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [56677.128806] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [56677.130656] ata1.00: configured for UDMA/133 [56677.154853] sd 0:0:0:0: [sda] Starting disk [56677.187223] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [56677.193709] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [56677.337836] PM: resume of devices complete after 2130.883 msecs [56677.338349] PM: Finishing wakeup. [56677.338352] Restarting tasks ... done. [56677.357112] video LNXVIDEO:00: Restoring backlight state [56677.364915] cfg80211: World regulatory domain updated: [56677.364926] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [56677.364933] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [56677.364940] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [56677.364946] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [56677.364952] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [56677.364958] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [56680.661114] wlan0: authenticate with 00:04:ed:ef:9d:49 [56680.676251] wlan0: send auth to 00:04:ed:ef:9d:49 (try 1/3) [56680.679136] wlan0: authenticated [56680.681542] wlan0: associate with 00:04:ed:ef:9d:49 (try 1/3) [56680.685064] wlan0: RX AssocResp from 00:04:ed:ef:9d:49 (capab=0x411 status=0 aid=3) [56680.688397] wlan0: associated [57282.672051] e1000e 0000:00:19.0: setting latency timer to 64 [57282.672108] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [57585.095376] wlan0: AP 00:04:ed:ef:9d:49 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz) [60682.916791] wlan0: cannot understand ECSA IE operating class 11, disconnecting [60682.968636] cfg80211: Calling CRDA to update world regulatory domain [60682.975045] cfg80211: World regulatory domain updated: [60682.975054] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [60682.975061] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [60682.975068] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [60682.975073] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [60682.975079] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [60682.975083] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [60686.309387] wlan0: authenticate with 00:04:ed:ef:9d:49 [60686.315554] wlan0: send auth to 00:04:ed:ef:9d:49 (try 1/3) [60686.319169] wlan0: authenticated [60686.323003] wlan0: associate with 00:04:ed:ef:9d:49 (try 1/3) [60686.329053] wlan0: RX AssocResp from 00:04:ed:ef:9d:49 (capab=0x411 status=0 aid=3) [60686.333540] wlan0: associated [60823.298416] wlan0: deauthenticating from 00:04:ed:ef:9d:49 by local choice (reason=3) [60823.308256] cfg80211: Calling CRDA to update world regulatory domain [60823.310132] cfg80211: World regulatory domain updated: [60823.310135] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [60823.310136] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [60823.310138] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [60823.310139] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [60823.310140] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [60823.310141] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [60823.909737] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [60823.382130] PM: Syncing filesystems ... done. [60823.922782] PM: Preparing system for mem sleep [60824.011816] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [60824.011904] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [60823.922987] Freezing user space processes ... (elapsed 0.093 seconds) done. [60824.016253] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [60824.017431] PM: Entering mem sleep [60824.017489] Suspending console(s) (use no_console_suspend to debug) [60824.017676] sd 0:0:0:0: [sda] Synchronizing SCSI cache [60824.040162] mei_me 0000:00:16.0: suspend [60824.229840] sd 0:0:0:0: [sda] Stopping disk [60824.647694] PM: suspend of devices complete after 630.294 msecs [60824.647855] PM: late suspend of devices complete after 0.158 msecs [60824.663731] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [60824.679879] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [60824.703593] e1000e 0000:00:19.0: System wakeup enabled by ACPI [60824.735586] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [60824.751602] PM: noirq suspend of devices complete after 103.778 msecs [60824.751841] ACPI: Preparing to enter system sleep state S3 [60824.792874] PM: Saving platform NVS memory [60824.793670] Disabling non-boot CPUs ... [60824.895473] smpboot: CPU 1 is now offline [60824.999445] smpboot: CPU 2 is now offline [60825.103418] smpboot: CPU 3 is now offline [60825.207376] smpboot: CPU 4 is now offline [60825.207815] Broke affinity for irq 21 [60825.311343] smpboot: CPU 5 is now offline [60825.415313] smpboot: CPU 6 is now offline [60825.415718] Broke affinity for irq 44 [60825.519313] smpboot: CPU 7 is now offline [60825.520804] ACPI: Low-level resume complete [60825.520845] PM: Restoring platform NVS memory [60825.521336] CPU0: Thermal monitoring handled by SMI [60825.521421] Enabling non-boot CPUs ... [60825.521463] smpboot: Booting Node 0 Processor 1 APIC 0x2 [60825.532729] CPU1: Thermal monitoring handled by SMI [60825.535146] CPU1 is up [60825.535162] smpboot: Booting Node 0 Processor 2 APIC 0x4 [60825.546442] CPU2: Thermal monitoring handled by SMI [60825.548804] CPU2 is up [60825.548820] smpboot: Booting Node 0 Processor 3 APIC 0x6 [60825.560103] CPU3: Thermal monitoring handled by SMI [60825.562472] CPU3 is up [60825.562487] smpboot: Booting Node 0 Processor 4 APIC 0x1 [60825.573752] CPU4: Thermal monitoring handled by SMI [60825.576090] CPU4 is up [60825.576103] smpboot: Booting Node 0 Processor 5 APIC 0x3 [60825.587361] CPU5: Thermal monitoring handled by SMI [60825.589703] CPU5 is up [60825.589716] smpboot: Booting Node 0 Processor 6 APIC 0x5 [60825.600986] CPU6: Thermal monitoring handled by SMI [60825.603331] CPU6 is up [60825.603344] smpboot: Booting Node 0 Processor 7 APIC 0x7 [60825.614619] CPU7: Thermal monitoring handled by SMI [60825.616970] CPU7 is up [60825.623370] ACPI: Waking up from system sleep state S3 [60825.665384] ACPI: \_SB_.PCI0: ACPI_NOTIFY_BUS_CHECK event: unsupported [60825.665387] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root [60825.712939] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [60825.772918] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [60825.804947] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [60825.820978] nvidia 0000:01:00.0: power state changed by ACPI to D0 [60825.869134] PM: noirq resume of devices complete after 176.221 msecs [60825.869230] PM: early resume of devices complete after 0.077 msecs [60825.869260] xhci_hcd 0000:00:14.0: setting latency timer to 64 [60825.869283] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X [60825.869293] ahci 0000:00:1f.2: setting latency timer to 64 [60825.869379] ehci-pci 0000:00:1a.0: setting latency timer to 64 [60825.869461] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [60825.869553] ehci-pci 0000:00:1d.0: setting latency timer to 64 [60826.080878] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci [60826.244816] usb 1-1.5: reset high-speed USB device number 4 using ehci-pci [60826.329012] e1000e 0000:00:19.0: System wakeup disabled by ACPI [60826.329030] e1000e 0000:00:19.0: setting latency timer to 64 [60826.329055] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [60826.428935] dpm_run_callback(): pnp_bus_resume+0x0/0x80 returns -19 [60826.428936] PM: Device 00:09 failed to resume: error -19 [60826.668701] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [60826.880827] ata6: SATA link down (SStatus 0 SControl 300) [60826.880870] ata5: SATA link down (SStatus 0 SControl 300) [60826.924756] ata2.00: configured for UDMA/100 [60827.720367] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [60827.722539] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [60827.722544] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [60827.722546] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [60827.722916] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [60827.727192] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [60827.727196] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [60827.727199] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [60827.727540] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [60827.729452] ata1.00: configured for UDMA/133 [60827.752474] sd 0:0:0:0: [sda] Starting disk [60827.778770] PM: resume of devices complete after 1910.135 msecs [60827.778933] PM: Finishing wakeup. [60827.778934] Restarting tasks ... done. [60827.782981] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [60827.789466] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [60827.793273] video LNXVIDEO:00: Restoring backlight state [60827.896356] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [60827.944219] usb 3-4: new high-speed USB device number 8 using xhci_hcd [60827.960344] usb 3-4: New USB device found, idVendor=413c, idProduct=2513 [60827.960347] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [60827.960564] hub 3-4:1.0: USB hub found [60827.960618] hub 3-4:1.0: 3 ports detected [60828.056229] usb 2-1.7: new high-speed USB device number 7 using ehci-pci [60828.148448] usb 2-1.7: New USB device found, idVendor=413c, idProduct=2513 [60828.148451] usb 2-1.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [60828.148721] hub 2-1.7:1.0: USB hub found [60828.148819] hub 2-1.7:1.0: 3 ports detected [60828.420115] usb 2-1.7.3: new full-speed USB device number 8 using ehci-pci [60828.515202] usb 2-1.7.3: New USB device found, idVendor=1532, idProduct=010d [60828.515205] usb 2-1.7.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [60828.515207] usb 2-1.7.3: Product: Razer BlackWidow Ultimate [60828.515208] usb 2-1.7.3: Manufacturer: Razer [60828.516336] input: Razer Razer BlackWidow Ultimate as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.3/2-1.7.3:1.0/input/input26 [60828.516458] hid-generic 0003:1532:010D.0009: input,hidraw0: USB HID v1.11 Keyboard [Razer Razer BlackWidow Ultimate] on usb-0000:00:1d.0-1.7.3/input0 [60828.519648] input: Razer Razer BlackWidow Ultimate as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.3/2-1.7.3:1.1/input/input27 [60828.519768] hid-generic 0003:1532:010D.000A: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer BlackWidow Ultimate] on usb-0000:00:1d.0-1.7.3/input1 [60828.521981] input: Razer Razer BlackWidow Ultimate as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.3/2-1.7.3:1.2/input/input28 [60828.522072] hid-generic 0003:1532:010D.000B: input,hidraw2: USB HID v1.11 Mouse [Razer Razer BlackWidow Ultimate] on usb-0000:00:1d.0-1.7.3/input2 [60829.504888] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [60829.504943] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [60835.021764] wlan0: authenticate with 00:04:ed:ef:9d:49 [60835.033627] wlan0: send auth to 00:04:ed:ef:9d:49 (try 1/3) [60835.036371] wlan0: authenticated [60835.038006] wlan0: associate with 00:04:ed:ef:9d:49 (try 1/3) [60835.046880] wlan0: RX AssocResp from 00:04:ed:ef:9d:49 (capab=0x411 status=0 aid=4) [60835.050714] wlan0: associated [60835.050733] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [60837.309024] PM: Syncing filesystems ... done. [60837.684327] PM: Preparing system for mem sleep [60837.684453] Freezing user space processes ... (elapsed 0.001 seconds) done. [60837.685820] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [60837.687032] PM: Entering mem sleep [60837.687093] Suspending console(s) (use no_console_suspend to debug) [60837.687234] wlan0: deauthenticating from 00:04:ed:ef:9d:49 by local choice (reason=3) [60837.733882] cfg80211: Calling CRDA to update world regulatory domain [60837.733952] sd 0:0:0:0: [sda] Synchronizing SCSI cache [60837.753631] mei_me 0000:00:16.0: suspend [60837.772620] sd 0:0:0:0: [sda] Stopping disk [60838.249188] PM: suspend of devices complete after 562.172 msecs [60838.249333] PM: late suspend of devices complete after 0.142 msecs [60838.265164] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [60838.281315] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [60838.305007] e1000e 0000:00:19.0: System wakeup enabled by ACPI [60838.337003] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [60838.353049] PM: noirq suspend of devices complete after 103.746 msecs [60838.353240] ACPI: Preparing to enter system sleep state S3 [60838.394161] PM: Saving platform NVS memory [60838.394816] Disabling non-boot CPUs ... [60838.496900] smpboot: CPU 1 is now offline [60838.600867] smpboot: CPU 2 is now offline [60838.704835] smpboot: CPU 3 is now offline [60838.808811] smpboot: CPU 4 is now offline [60838.809208] Broke affinity for irq 21 [60838.912769] smpboot: CPU 5 is now offline [60839.016734] smpboot: CPU 6 is now offline [60839.120711] smpboot: CPU 7 is now offline [60839.122156] ACPI: Low-level resume complete [60839.122204] PM: Restoring platform NVS memory [60839.122730] CPU0: Thermal monitoring handled by SMI [60839.122766] Enabling non-boot CPUs ... [60839.122810] smpboot: Booting Node 0 Processor 1 APIC 0x2 [60839.134079] CPU1: Thermal monitoring handled by SMI [60839.136499] CPU1 is up [60839.136515] smpboot: Booting Node 0 Processor 2 APIC 0x4 [60839.147799] CPU2: Thermal monitoring handled by SMI [60839.150161] CPU2 is up [60839.150177] smpboot: Booting Node 0 Processor 3 APIC 0x6 [60839.161462] CPU3: Thermal monitoring handled by SMI [60839.163832] CPU3 is up [60839.163847] smpboot: Booting Node 0 Processor 4 APIC 0x1 [60839.175115] CPU4: Thermal monitoring handled by SMI [60839.177459] CPU4 is up [60839.177473] smpboot: Booting Node 0 Processor 5 APIC 0x3 [60839.188733] CPU5: Thermal monitoring handled by SMI [60839.191081] CPU5 is up [60839.191093] smpboot: Booting Node 0 Processor 6 APIC 0x5 [60839.202366] CPU6: Thermal monitoring handled by SMI [60839.204703] CPU6 is up [60839.204715] smpboot: Booting Node 0 Processor 7 APIC 0x7 [60839.215993] CPU7: Thermal monitoring handled by SMI [60839.218346] CPU7 is up [60839.224774] ACPI: Waking up from system sleep state S3 [60839.266825] ACPI: \_SB_.PCI0: ACPI_NOTIFY_BUS_CHECK event: unsupported [60839.266828] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root [60839.314348] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [60839.370374] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [60839.402363] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [60839.418391] nvidia 0000:01:00.0: power state changed by ACPI to D0 [60839.466548] PM: noirq resume of devices complete after 172.194 msecs [60839.466652] PM: early resume of devices complete after 0.082 msecs [60839.466688] xhci_hcd 0000:00:14.0: setting latency timer to 64 [60839.466702] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X [60839.466715] ahci 0000:00:1f.2: setting latency timer to 64 [60839.466846] ehci-pci 0000:00:1a.0: setting latency timer to 64 [60839.466925] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [60839.467043] ehci-pci 0000:00:1d.0: setting latency timer to 64 [60839.678378] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci [60839.842318] usb 1-1.5: reset high-speed USB device number 4 using ehci-pci [60839.898363] e1000e 0000:00:19.0: System wakeup disabled by ACPI [60839.898374] e1000e 0000:00:19.0: setting latency timer to 64 [60839.898398] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [60840.002279] dpm_run_callback(): pnp_bus_resume+0x0/0x80 returns -19 [60840.002280] PM: Device 00:09 failed to resume: error -19 [60840.006304] usb 2-1.7: reset high-speed USB device number 7 using ehci-pci [60840.210295] usb 3-4: reset high-speed USB device number 8 using xhci_hcd [60840.226256] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88011dc8e200 [60840.246117] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [60840.458222] ata6: SATA link down (SStatus 0 SControl 300) [60840.458279] ata5: SATA link down (SStatus 0 SControl 300) [60840.502155] ata2.00: configured for UDMA/100 [60840.506125] usb 2-1.7.3: reset full-speed USB device number 8 using ehci-pci [60841.297785] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [60841.299944] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [60841.299948] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [60841.299951] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [60841.300345] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [60841.304592] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [60841.304596] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [60841.304599] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [60841.304946] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [60841.306849] ata1.00: configured for UDMA/133 [60841.329892] sd 0:0:0:0: [sda] Starting disk [60841.361399] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [60841.367866] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [60841.522365] PM: resume of devices complete after 2056.355 msecs [60841.522536] PM: Finishing wakeup. [60841.522536] Restarting tasks ... done. [60841.528171] cfg80211: World regulatory domain updated: [60841.528174] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [60841.528176] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [60841.528178] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [60841.528179] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [60841.528180] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [60841.528181] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [60841.530851] video LNXVIDEO:00: Restoring backlight state [60843.054238] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [60844.872866] wlan0: authenticate with 00:04:ed:ef:9d:49 [60844.877078] wlan0: send auth to 00:04:ed:ef:9d:49 (try 1/3) [60844.881829] wlan0: authenticated [60844.884575] wlan0: associate with 00:04:ed:ef:9d:49 (try 1/3) [60844.888072] wlan0: RX AssocResp from 00:04:ed:ef:9d:49 (capab=0x411 status=0 aid=4) [60844.891672] wlan0: associated [60934.211078] hid-generic 0005:045E:0700.000C: unknown main item tag 0x0 [60934.211132] input: Microsoft Bluetooth Notebook Mouse 5000 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0/hci0:11/input29 [60934.211646] hid-generic 0005:045E:0700.000C: input,hidraw3: BLUETOOTH HID v1.00 Mouse [Microsoft Bluetooth Notebook Mouse 5000] on 20:16:d8:9c:38:e5 [61329.178253] wlan0: cannot understand ECSA IE operating class 11, disconnecting [61329.219886] cfg80211: Calling CRDA to update world regulatory domain [61329.224811] cfg80211: World regulatory domain updated: [61329.224816] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [61329.224820] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [61329.224823] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [61329.224825] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [61329.224828] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [61329.224830] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [61332.525702] wlan0: authenticate with 00:04:ed:ef:9d:49 [61332.538647] wlan0: send auth to 00:04:ed:ef:9d:49 (try 1/3) [61332.541483] wlan0: authenticated [61332.542620] wlan0: associate with 00:04:ed:ef:9d:49 (try 1/3) [61332.546154] wlan0: RX AssocResp from 00:04:ed:ef:9d:49 (capab=0x411 status=0 aid=4) [61332.549898] wlan0: associated [62508.157981] wlan0: AP 00:04:ed:ef:9d:49 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz) [65173.022608] wlan0: cannot understand ECSA IE operating class 11, disconnecting [65173.067801] cfg80211: Calling CRDA to update world regulatory domain [65173.072306] cfg80211: World regulatory domain updated: [65173.072312] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [65173.072315] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [65173.072318] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [65173.072321] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [65173.072323] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [65173.072326] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [65176.393718] wlan0: authenticate with 00:04:ed:ef:9d:49 [65176.406921] wlan0: send auth to 00:04:ed:ef:9d:49 (try 1/3) [65176.409698] wlan0: authenticated [65176.410293] wlan0: associate with 00:04:ed:ef:9d:49 (try 1/3) [65176.413826] wlan0: RX AssocResp from 00:04:ed:ef:9d:49 (capab=0x411 status=0 aid=4) [65176.417351] wlan0: associated [67657.473851] wlan0: AP 00:04:ed:ef:9d:49 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)