[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-22-server (buildd@allspice) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu9) ) #69-Ubuntu SMP Wed Nov 24 09:25:59 UTC 2010 (Ubuntu 2.6.31-22.69-server) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.31-22-server root=/dev/mapper/WebEntU2-root ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffce0e5 (usable) [ 0.000000] BIOS-e820: 000000007ffce0e5 - 000000007fff0000 (reserved) [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007ffff000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ffff000 - 0000000080000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec86000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x7ffce max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007ffce0e5 (usable) [ 0.000000] modified: 000000007ffce0e5 - 000000007fff0000 (reserved) [ 0.000000] modified: 000000007fff0000 - 000000007ffff000 (ACPI data) [ 0.000000] modified: 000000007ffff000 - 0000000080000000 (ACPI NVS) [ 0.000000] modified: 00000000fec00000 - 00000000fec86000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000007ffce000 [ 0.000000] Warning: NX (Execute Disable) protection missing in CPU or disabled in BIOS! [ 0.000000] 0000000000 - 007fe00000 page 2M [ 0.000000] 007fe00000 - 007ffce000 page 4k [ 0.000000] kernel direct mapping tables up to 7ffce000 @ 8000-c000 [ 0.000000] RAMDISK: 377f3000 - 37fefe19 [ 0.000000] ACPI: RSDP 00000000000f7ef0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 000000007fff0000 00034 (v01 A M I OEMRSDT 07000526 MSFT 00000097) [ 0.000000] ACPI: FACP 000000007fff0200 00081 (v01 A M I OEMFACP 07000526 MSFT 00000097) [ 0.000000] ACPI: DSDT 000000007fff0420 03CFE (v01 LHREF LHREF001 00000001 INTL 02002026) [ 0.000000] ACPI: FACS 000000007ffff000 00040 [ 0.000000] ACPI: APIC 000000007fff0300 00090 (v01 A M I OEMAPIC 07000526 MSFT 00000097) [ 0.000000] ACPI: MCFG 000000007fff03e0 0003C (v01 A M I OEMMCFG 07000526 MSFT 00000097) [ 0.000000] ACPI: OEMB 000000007ffff040 00040 (v01 A M I OEMBIOS 07000526 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007ffce000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000007ffce000 [ 0.000000] NODE_DATA [000000000000a000 - 000000000000efff] [ 0.000000] bootmap [000000000000f000 - 000000000001efff] pages 10 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007ffce000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00019e9e8c] TEXT DATA BSS ==> [0001000000 - 00019e9e8c] [ 0.000000] #3 [00377f3000 - 0037fefe19] RAMDISK ==> [00377f3000 - 0037fefe19] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [00019ea000 - 00019ea1b4] BRK ==> [00019ea000 - 00019ea1b4] [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001e00000-ffff8800039fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007ffce [ 0.000000] On node 0 totalpages: 524136 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 102 pages reserved [ 0.000000] DMA zone: 3836 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7112 pages used for memmap [ 0.000000] DMA32 zone: 513030 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec10000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec10000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 48 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages at ffff8800019fb000, static data 90720 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516866 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.31-22-server root=/dev/mapper/WebEntU2-root ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 2048888k/2096952k available (5323k kernel code, 408k absent, 47656k reserved, 3020k data, 668k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:848 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2793.063 MHz processor. [ 0.001637] Console: colour VGA+ 80x25 [ 0.001642] console [tty0] enabled [ 0.010000] allocated 20971520 bytes of page_cgroup [ 0.010000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.010011] Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.12 BogoMIPS (lpj=27930630) [ 0.010058] Security Framework initialized [ 0.010095] AppArmor: AppArmor initialized [ 0.010456] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.012393] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.013267] Mount-cache hash table entries: 256 [ 0.013519] Initializing cgroup subsys ns [ 0.013526] Initializing cgroup subsys cpuacct [ 0.013533] Initializing cgroup subsys memory [ 0.013546] Initializing cgroup subsys devices [ 0.013550] Initializing cgroup subsys freezer [ 0.013553] Initializing cgroup subsys net_cls [ 0.013579] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.013583] CPU: L2 cache: 2048K [ 0.013588] CPU 0/0x0 -> Node 0 [ 0.013591] CPU: Physical Processor ID: 0 [ 0.013593] CPU: Processor Core ID: 0 [ 0.013598] mce: CPU supports 4 MCE banks [ 0.013614] CPU0: Thermal monitoring enabled (TM1) [ 0.013621] using mwait in idle threads. [ 0.013623] Performance Counters: no PMU driver, software counters only. [ 0.016947] ACPI: Core revision 20090521 [ 0.030103] Setting APIC routing to flat [ 0.030502] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.138649] CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 03 [ 0.140000] APIC calibration not consistent with PM-Timer: 110ms instead of 100ms [ 0.140000] APIC delta adjusted to PM-Timer: 1246875 (1371579) [ 0.140000] Booting processor 1 APIC 0x6 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] Calibrating delay using timer specific routine.. 5586.13 BogoMIPS (lpj=27930683) [ 0.010000] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.010000] CPU: L2 cache: 2048K [ 0.010000] CPU 1/0x6 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 3 [ 0.010000] CPU: Processor Core ID: 0 [ 0.010000] mce: CPU supports 4 MCE banks [ 0.010000] CPU1: Thermal monitoring enabled (TM1) [ 0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.291025] CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 03 [ 0.291037] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.300172] Booting processor 2 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#2 [ 0.010000] Calibrating delay using timer specific routine.. 5586.11 BogoMIPS (lpj=27930597) [ 0.010000] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.010000] CPU: L2 cache: 2048K [ 0.010000] CPU 2/0x1 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 0 [ 0.010000] mce: CPU supports 4 MCE banks [ 0.010000] CPU2: Thermal monitoring enabled (TM1) [ 0.010000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.461150] CPU2: Intel(R) Xeon(TM) CPU 2.80GHz stepping 03 [ 0.461170] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.470233] Booting processor 3 APIC 0x7 ip 0x6000 [ 0.010000] Initializing CPU#3 [ 0.010000] Calibrating delay using timer specific routine.. 5586.15 BogoMIPS (lpj=27930756) [ 0.010000] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.010000] CPU: L2 cache: 2048K [ 0.010000] CPU 3/0x7 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 3 [ 0.010000] CPU: Processor Core ID: 0 [ 0.010000] mce: CPU supports 4 MCE banks [ 0.010000] CPU3: Thermal monitoring enabled (TM1) [ 0.010000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.631072] CPU3: Intel(R) Xeon(TM) CPU 2.80GHz stepping 03 [ 0.631083] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.640034] Brought up 4 CPUs [ 0.640039] Total of 4 processors activated (22344.53 BogoMIPS). [ 0.640104] CPU0 attaching sched-domain: [ 0.640109] domain 0: span 0,2 level SIBLING [ 0.640113] groups: 0 2 [ 0.640119] domain 1: span 0-3 level CPU [ 0.640122] groups: 0,2 1,3 [ 0.640132] CPU1 attaching sched-domain: [ 0.640134] domain 0: span 1,3 level SIBLING [ 0.640138] groups: 1 3 [ 0.640142] domain 1: span 0-3 level CPU [ 0.640145] groups: 1,3 0,2 [ 0.640152] CPU2 attaching sched-domain: [ 0.640154] domain 0: span 0,2 level SIBLING [ 0.640157] groups: 2 0 [ 0.640162] domain 1: span 0-3 level CPU [ 0.640165] groups: 0,2 1,3 [ 0.640171] CPU3 attaching sched-domain: [ 0.640173] domain 0: span 1,3 level SIBLING [ 0.640176] groups: 3 1 [ 0.640181] domain 1: span 0-3 level CPU [ 0.640184] groups: 1,3 0,2 [ 0.640381] Booting paravirtualized kernel on bare hardware [ 0.640381] regulator: core version 0.5 [ 0.640381] Time: 18:08:08 Date: 12/02/10 [ 0.640381] NET: Registered protocol family 16 [ 0.640381] ACPI: bus type pci registered [ 0.640465] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.640469] PCI: Not using MMCONFIG. [ 0.640472] PCI: Using configuration type 1 for base access [ 0.641799] bio: create slab at 0 [ 0.641799] ACPI: EC: Look up EC in DSDT [ 0.652534] ACPI: Interpreter enabled [ 0.652542] ACPI: (supports S0 S1 S4 S5) [ 0.652572] ACPI: Using IOAPIC for interrupt routing [ 0.652645] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.657542] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.662197] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.668608] ACPI Warning: Incorrect checksum in table [OEMB] - B9, should be AE 20090521 tbutils-246 [ 0.668747] ACPI: No dock devices found. [ 0.668912] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.669141] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.669147] pci 0000:00:02.0: PME# disabled [ 0.669218] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.669223] pci 0000:00:03.0: PME# disabled [ 0.669361] pci 0000:00:1d.0: reg 20 io port: [0xb880-0xb89f] [ 0.669423] pci 0000:00:1d.1: reg 20 io port: [0xbc00-0xbc1f] [ 0.669468] pci 0000:00:1d.4: reg 10 32bit mmio: [0xdecff800-0xdecff80f] [ 0.669628] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdecffc00-0xdecfffff] [ 0.669691] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.669697] pci 0000:00:1d.7: PME# disabled [ 0.669796] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO [ 0.669801] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO [ 0.669829] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.669838] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.669846] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.669853] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.669861] pci 0000:00:1f.1: reg 20 io port: [0xfc00-0xfc0f] [ 0.669869] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] [ 0.669928] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.670094] pci 0000:02:00.0: reg 10 64bit mmio: [0xdedfc000-0xdedfffff] [ 0.670104] pci 0000:02:00.0: reg 18 io port: [0xc800-0xc8ff] [ 0.670128] pci 0000:02:00.0: reg 30 32bit mmio: [0xdedc0000-0xdeddffff] [ 0.670166] pci 0000:02:00.0: supports D1 D2 [ 0.670170] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.670175] pci 0000:02:00.0: PME# disabled [ 0.670232] pci 0000:00:03.0: bridge io port: [0xc000-0xcfff] [ 0.670237] pci 0000:00:03.0: bridge 32bit mmio: [0xded00000-0xdedfffff] [ 0.670306] pci 0000:03:02.0: reg 10 64bit mmio: [0xdc000000-0xddffffff] [ 0.670320] pci 0000:03:02.0: reg 18 64bit mmio: [0xdeeff000-0xdeefffff] [ 0.670329] pci 0000:03:02.0: reg 20 io port: [0xdc00-0xdc3f] [ 0.670343] pci 0000:03:02.0: reg 30 32bit mmio: [0xdeec0000-0xdeedffff] [ 0.670373] pci 0000:03:02.0: supports D1 D2 [ 0.670437] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff] [ 0.670442] pci 0000:00:1c.0: bridge 32bit mmio: [0xdee00000-0xdeefffff] [ 0.670450] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xdc000000-0xddffffff] [ 0.670494] pci 0000:04:02.0: reg 10 32bit mmio: [0xdf000000-0xdfffffff] [ 0.670503] pci 0000:04:02.0: reg 14 io port: [0xe800-0xe8ff] [ 0.670511] pci 0000:04:02.0: reg 18 32bit mmio: [0xdefff000-0xdeffffff] [ 0.670533] pci 0000:04:02.0: reg 30 32bit mmio: [0xdefc0000-0xdefdffff] [ 0.670554] pci 0000:04:02.0: supports D1 D2 [ 0.670599] pci 0000:04:03.0: reg 10 32bit mmio: [0xdefa0000-0xdefbffff] [ 0.670611] pci 0000:04:03.0: reg 18 io port: [0xec00-0xec3f] [ 0.670654] pci 0000:04:03.0: PME# supported from D0 D3hot D3cold [ 0.670659] pci 0000:04:03.0: PME# disabled [ 0.670699] pci 0000:04:05.0: reg 10 io port: [0xe400-0xe41f] [ 0.670745] pci 0000:04:05.0: supports D1 D2 [ 0.670783] pci 0000:04:05.1: reg 10 io port: [0xe480-0xe487] [ 0.670829] pci 0000:04:05.1: supports D1 D2 [ 0.670880] pci 0000:00:1e.0: transparent bridge [ 0.670885] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] [ 0.670891] pci 0000:00:1e.0: bridge 32bit mmio: [0xdef00000-0xdfffffff] [ 0.670920] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.671150] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.671238] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.671339] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.671459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 0.675012] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.675165] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.675313] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.675461] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.675608] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.675756] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.675904] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.676059] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.676346] SCSI subsystem initialized [ 0.676390] libata version 3.00 loaded. [ 0.676390] usbcore: registered new interface driver usbfs [ 0.676390] usbcore: registered new interface driver hub [ 0.676390] usbcore: registered new device driver usb [ 0.676390] ACPI: WMI: Mapper loaded [ 0.676390] PCI: Using ACPI for IRQ routing [ 0.700015] Bluetooth: Core ver 2.15 [ 0.700046] NET: Registered protocol family 31 [ 0.700046] Bluetooth: HCI device and connection manager initialized [ 0.700046] Bluetooth: HCI socket layer initialized [ 0.700046] NetLabel: Initializing [ 0.700046] NetLabel: domain hash size = 128 [ 0.700046] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.700057] NetLabel: unlabeled traffic allowed by default [ 0.730017] pnp: PnP ACPI init [ 0.730040] ACPI: bus type pnp registered [ 0.735123] pnp: PnP ACPI: found 15 devices [ 0.735127] ACPI: ACPI bus type pnp unregistered [ 0.735148] system 00:0a: ioport range 0x460-0x47f has been reserved [ 0.735152] system 00:0a: ioport range 0x420-0x42f has been reserved [ 0.735156] system 00:0a: ioport range 0x560-0x56f has been reserved [ 0.735160] system 00:0a: ioport range 0x6c0-0x6df has been reserved [ 0.735168] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved [ 0.735172] system 00:0b: ioport range 0x800-0x87f has been reserved [ 0.735176] system 00:0b: ioport range 0x480-0x4bf has been reserved [ 0.735181] system 00:0b: iomem range 0xfec10000-0xfec1ffff could not be reserved [ 0.735185] system 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.735189] system 00:0b: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.735197] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.735201] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.735208] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved [ 0.735216] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 0.735219] system 00:0e: iomem range 0xc0000-0xdffff has been reserved [ 0.735223] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 0.735227] system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved [ 0.735231] system 00:0e: iomem range 0xfff00000-0xffffffff has been reserved [ 0.739979] AppArmor: AppArmor Filesystem Enabled [ 0.740027] pci 0000:04:02.0: BAR 6: address space collision on of device [0xdefc0000-0xdefdffff] [ 0.740075] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 0.740079] pci 0000:00:02.0: IO window: disabled [ 0.740084] pci 0000:00:02.0: MEM window: disabled [ 0.740089] pci 0000:00:02.0: PREFETCH window: disabled [ 0.740094] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02 [ 0.740098] pci 0000:00:03.0: IO window: 0xc000-0xcfff [ 0.740104] pci 0000:00:03.0: MEM window: 0xded00000-0xdedfffff [ 0.740109] pci 0000:00:03.0: PREFETCH window: disabled [ 0.740114] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03 [ 0.740118] pci 0000:00:1c.0: IO window: 0xd000-0xdfff [ 0.740124] pci 0000:00:1c.0: MEM window: 0xdee00000-0xdeefffff [ 0.740129] pci 0000:00:1c.0: PREFETCH window: 0x000000dc000000-0x000000ddffffff [ 0.740139] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 [ 0.740143] pci 0000:00:1e.0: IO window: 0xe000-0xefff [ 0.740150] pci 0000:00:1e.0: MEM window: 0xdef00000-0xdfffffff [ 0.740155] pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x800fffff [ 0.740175] alloc irq_desc for 16 on node 0 [ 0.740179] alloc kstat_irqs on node 0 [ 0.740187] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.740193] pci 0000:00:02.0: setting latency timer to 64 [ 0.740203] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.740207] pci 0000:00:03.0: setting latency timer to 64 [ 0.740220] pci 0000:00:1e.0: setting latency timer to 64 [ 0.740227] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.740230] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.740234] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff] [ 0.740237] pci_bus 0000:02: resource 1 mem: [0xded00000-0xdedfffff] [ 0.740240] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] [ 0.740244] pci_bus 0000:03: resource 1 mem: [0xdee00000-0xdeefffff] [ 0.740247] pci_bus 0000:03: resource 2 pref mem [0xdc000000-0xddffffff] [ 0.740250] pci_bus 0000:04: resource 0 io: [0xe000-0xefff] [ 0.740253] pci_bus 0000:04: resource 1 mem: [0xdef00000-0xdfffffff] [ 0.740256] pci_bus 0000:04: resource 2 pref mem [0x80000000-0x800fffff] [ 0.740260] pci_bus 0000:04: resource 3 io: [0x00-0xffff] [ 0.740263] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.740319] NET: Registered protocol family 2 [ 0.740539] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.742099] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.745732] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.746596] TCP: Hash tables configured (established 262144 bind 65536) [ 0.746599] TCP reno registered [ 0.746783] NET: Registered protocol family 1 [ 0.746892] Trying to unpack rootfs image as initramfs... [ 1.027505] Freeing initrd memory: 8179k freed [ 1.037493] Scanning for low memory corruption every 60 seconds [ 1.037689] audit: initializing netlink socket (disabled) [ 1.037712] type=2000 audit(1291313288.029:1): initialized [ 1.048017] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.050115] VFS: Disk quotas dquot_6.5.2 [ 1.050198] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.051151] fuse init (API version 7.12) [ 1.051279] msgmni has been set to 4017 [ 1.051695] alg: No test for stdrng (krng) [ 1.051721] io scheduler noop registered [ 1.051724] io scheduler anticipatory registered [ 1.051727] io scheduler deadline registered (default) [ 1.051797] io scheduler cfq registered [ 1.051871] disabled boot interrupt on device 0x8086:0x25ac [ 1.051918] pci 0000:04:02.0: Boot video device [ 1.052090] pcieport-driver 0000:00:02.0: setting latency timer to 64 [ 1.052244] pcieport-driver 0000:00:03.0: setting latency timer to 64 [ 1.052488] aer 0000:00:02.0:pcie02: AER service couldn't init device: no _OSC support [ 1.052500] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support [ 1.052514] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.052550] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.052749] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.052755] ACPI: Power Button [PWRF] [ 1.052837] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.052841] ACPI: Power Button [PWRB] [ 1.053526] processor LNXCPU:00: registered as cooling_device0 [ 1.053532] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.053883] processor LNXCPU:01: registered as cooling_device1 [ 1.053893] ACPI: Processor [CPU1] (supports 8 throttling states) [ 1.054160] processor LNXCPU:02: registered as cooling_device2 [ 1.054319] processor LNXCPU:03: registered as cooling_device3 [ 1.058125] Linux agpgart interface v0.103 [ 1.058140] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.058266] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.058361] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.058706] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.058846] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.060395] brd: module loaded [ 1.061043] loop: module loaded [ 1.061176] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.061373] ata_piix 0000:00:1f.1: version 2.13 [ 1.061395] alloc irq_desc for 18 on node 0 [ 1.061399] alloc kstat_irqs on node 0 [ 1.061410] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.061477] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.061582] scsi0 : ata_piix [ 1.061710] scsi1 : ata_piix [ 1.063721] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 1.063725] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 1.064928] Fixed MDIO Bus: probed [ 1.064978] PPP generic driver version 2.4.2 [ 1.065105] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.065179] alloc irq_desc for 23 on node 0 [ 1.065183] alloc kstat_irqs on node 0 [ 1.065190] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 1.065207] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.065212] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.065284] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.069206] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.069214] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported [ 1.069232] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdecffc00 [ 1.090010] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.090115] usb usb1: configuration #1 chosen from 1 choice [ 1.090160] hub 1-0:1.0: USB hub found [ 1.090173] hub 1-0:1.0: 4 ports detected [ 1.090261] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.090283] uhci_hcd: USB Universal Host Controller Interface driver [ 1.090437] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.090446] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.090451] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.090511] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.090544] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000b880 [ 1.090652] usb usb2: configuration #1 chosen from 1 choice [ 1.090689] hub 2-0:1.0: USB hub found [ 1.090699] hub 2-0:1.0: 2 ports detected [ 1.090803] alloc irq_desc for 19 on node 0 [ 1.090807] alloc kstat_irqs on node 0 [ 1.090813] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.090820] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.090824] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.090871] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.090906] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000bc00 [ 1.091015] usb usb3: configuration #1 chosen from 1 choice [ 1.091057] hub 3-0:1.0: USB hub found [ 1.091069] hub 3-0:1.0: 2 ports detected [ 1.091207] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.094042] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.094059] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.094177] mice: PS/2 mouse device common for all mice [ 1.094297] rtc_cmos 00:02: RTC can wake from S4 [ 1.094346] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.094371] rtc0: alarms up to one month, 114 bytes nvram [ 1.094558] device-mapper: uevent: version 1.0.3 [ 1.094699] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.094874] device-mapper: multipath: version 1.1.0 loaded [ 1.094880] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.095282] cpuidle: using governor ladder [ 1.095285] cpuidle: using governor menu [ 1.095890] TCP cubic registered [ 1.096074] NET: Registered protocol family 10 [ 1.096693] lo: Disabled Privacy Extensions [ 1.097086] NET: Registered protocol family 17 [ 1.097115] Bluetooth: L2CAP ver 2.13 [ 1.097117] Bluetooth: L2CAP socket layer initialized [ 1.097121] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.097123] Bluetooth: SCO socket layer initialized [ 1.097165] Bluetooth: RFCOMM TTY layer initialized [ 1.097170] Bluetooth: RFCOMM socket layer initialized [ 1.097172] Bluetooth: RFCOMM ver 1.11 [ 1.097334] PM: Resume from disk failed. [ 1.097353] registered taskstats version 1 [ 1.097542] Magic number: 6:161:139 [ 1.097556] block ram4: hash matches [ 1.097597] acpi device:10: hash matches [ 1.097638] rtc_cmos 00:02: setting system clock to 2010-12-02 18:08:09 UTC (1291313289) [ 1.097643] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.097645] EDD information not available. [ 1.120599] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.231086] Switched to high resolution mode on CPU 1 [ 1.231123] Switched to high resolution mode on CPU 3 [ 1.231218] Switched to high resolution mode on CPU 2 [ 1.239990] Switched to high resolution mode on CPU 0 [ 1.242798] ata1.00: ATAPI: LITE-ON DVDRW SOHW-1693S, KS09, max UDMA/66 [ 1.242821] ata1.00: limited to UDMA/33 due to 40-wire cable [ 1.280180] ata1.00: configured for UDMA/33 [ 1.281538] scsi 0:0:0:0: CD-ROM LITE-ON DVDRW SOHW-1693S KS09 PQ: 0 ANSI: 5 [ 1.285440] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 1.285446] Uniform CD-ROM driver Revision: 3.20 [ 1.285580] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.285659] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.285708] Freeing unused kernel memory: 668k freed [ 1.286476] Write protecting the kernel read-only data: 7592k [ 1.413791] usb 1-4: new high speed USB device using ehci_hcd and address 2 [ 1.467933] Floppy drive(s): fd0 is 1.44M [ 1.500395] FDC 0 is a National Semiconductor PC87306 [ 1.511184] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI [ 1.511194] Copyright (c) 1999-2006 Intel Corporation. [ 1.518004] sky2 driver version 1.23 [ 1.519312] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.519345] sky2 0000:02:00.0: setting latency timer to 64 [ 1.519402] sky2 0000:02:00.0: Yukon-2 EC chip revision 2 [ 1.519494] alloc irq_desc for 48 on node 0 [ 1.519500] alloc kstat_irqs on node 0 [ 1.519523] sky2 0000:02:00.0: irq 48 for MSI/MSI-X [ 1.532287] sky2 eth0: addr 00:0e:0c:3b:a3:5c [ 1.533327] e1000 0000:04:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.535092] 3ware 9000 Storage Controller device driver for Linux v2.26.02.012. [ 1.535400] alloc irq_desc for 24 on node 0 [ 1.535406] alloc kstat_irqs on node 0 [ 1.535417] 3w-9xxx 0000:03:02.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 [ 1.563059] usb 1-4: configuration #1 chosen from 1 choice [ 1.563275] hub 1-4:1.0: USB hub found [ 1.563435] hub 1-4:1.0: 7 ports detected [ 1.828966] e1000: 0000:04:03.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:3b:a3:5d [ 1.842634] usb 1-4.3: new high speed USB device using ehci_hcd and address 3 [ 2.010014] scsi2 : 3ware 9000 Storage Controller [ 2.010097] 3w-9xxx: scsi2: Found a 3ware 9000 Storage Controller at 0xdeeff000, IRQ: 24. [ 2.052868] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection [ 2.130949] usb 1-4.3: configuration #1 chosen from 1 choice [ 2.370017] 3w-9xxx: scsi2: Firmware FE9X 3.01.01.028, BIOS BE9X 3.01.00.024, Ports: 4. [ 2.370565] scsi 2:0:0:0: Direct-Access AMCC 9550SX-4LP DISK 3.01 PQ: 0 ANSI: 3 [ 2.376572] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.377109] sd 2:0:0:0: [sda] 312455168 512-byte logical blocks: (159 GB/148 GiB) [ 2.377294] sd 2:0:0:0: [sda] Write Protect is off [ 2.377299] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00 [ 2.377625] sd 2:0:0:0: [sda] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [ 2.378346] sda: sda1 sda2 < sda5 > [ 2.416229] sd 2:0:0:0: [sda] Attached SCSI disk [ 3.600195] PM: Starting manual resume from disk [ 3.600201] PM: Resume from partition 252:1 [ 3.600204] PM: Checking hibernation image. [ 3.600429] PM: Resume from disk failed. [ 3.608849] EXT4-fs (dm-0): barriers enabled [ 3.621015] kjournald2 starting: pid 441, dev dm-0:8, commit interval 5 seconds [ 3.621200] EXT4-fs (dm-0): delayed allocation enabled [ 3.621206] EXT4-fs: file extents enabled [ 3.621695] EXT4-fs: mballoc enabled [ 3.621719] EXT4-fs (dm-0): mounted filesystem with ordered data mode [ 4.261496] type=1505 audit(1291313292.662:2): operation="profile_load" pid=468 name=/usr/share/gdm/guest-session/Xsession [ 4.275504] type=1505 audit(1291313292.673:3): operation="profile_load" pid=469 name=/sbin/dhclient3 [ 4.276278] type=1505 audit(1291313292.673:4): operation="profile_load" pid=469 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 4.276705] type=1505 audit(1291313292.673:5): operation="profile_load" pid=469 name=/usr/lib/connman/scripts/dhclient-script [ 4.305448] type=1505 audit(1291313292.703:6): operation="profile_load" pid=470 name=/usr/bin/evince [ 4.318351] type=1505 audit(1291313292.713:7): operation="profile_load" pid=470 name=/usr/bin/evince-previewer [ 4.325644] type=1505 audit(1291313292.723:8): operation="profile_load" pid=470 name=/usr/bin/evince-thumbnailer [ 4.358215] type=1505 audit(1291313292.753:9): operation="profile_load" pid=472 name=/usr/lib/cups/backend/cups-pdf [ 4.359134] type=1505 audit(1291313292.753:10): operation="profile_load" pid=472 name=/usr/sbin/cupsd [ 5.685950] Adding 6025208k swap on /dev/mapper/WebEntU2-swap_1. Priority:-1 extents:1 across:6025208k [ 6.068295] EXT4-fs (dm-0): internal journal on dm-0:8 [ 6.237267] udev: starting version 147 [ 7.153150] Linux video capture interface: v2.00 [ 7.156806] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.167720] EDAC MC: Ver: 2.1.0 Nov 24 2010 [ 7.199811] lp: driver loaded but no devices found [ 7.203537] EDAC e752x: tolm = 80000, remapbase = ffc000, remaplimit = 0 [ 7.203592] EDAC MC0: Giving out device to 'e752x_edac' 'E7320': DEV 0000:00:00.0 [ 7.203642] EDAC PCI0: Giving out device to module 'e752x_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED) [ 7.212586] uvcvideo: Found UVC 1.00 device (046d:08c5) [ 7.217694] ip_tables: (C) 2000-2006 Netfilter Core Team [ 7.269555] intel_rng: FWH not detected [ 7.363210] gameport: EMU10K1 is pci0000:04:05.1/gameport0, io 0xe480, speed 986kHz [ 7.393887] input: UVC Camera (046d:08c5) as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.3/1-4.3:1.0/input/input4 [ 7.393974] usbcore: registered new interface driver uvcvideo [ 7.393979] USB Video Class driver (v0.1.0) [ 7.702452] alloc irq_desc for 20 on node 0 [ 7.702458] alloc kstat_irqs on node 0 [ 7.702470] EMU10K1_Audigy 0000:04:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 7.808256] usbcore: registered new interface driver snd-usb-audio [ 7.856633] input: ImExPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 10.820914] __ratelimit: 9 callbacks suppressed [ 10.820919] type=1505 audit(1291313299.216:14): operation="profile_replace" pid=935 name=/usr/share/gdm/guest-session/Xsession [ 10.823400] type=1505 audit(1291313299.216:15): operation="profile_replace" pid=936 name=/sbin/dhclient3 [ 10.824175] type=1505 audit(1291313299.226:16): operation="profile_replace" pid=936 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 10.824601] type=1505 audit(1291313299.226:17): operation="profile_replace" pid=936 name=/usr/lib/connman/scripts/dhclient-script [ 10.830732] type=1505 audit(1291313299.226:18): operation="profile_replace" pid=937 name=/usr/bin/evince [ 10.843931] type=1505 audit(1291313299.246:19): operation="profile_replace" pid=937 name=/usr/bin/evince-previewer [ 10.851402] type=1505 audit(1291313299.246:20): operation="profile_replace" pid=937 name=/usr/bin/evince-thumbnailer [ 10.863645] type=1505 audit(1291313299.256:21): operation="profile_replace" pid=939 name=/usr/lib/cups/backend/cups-pdf [ 10.864584] type=1505 audit(1291313299.266:22): operation="profile_replace" pid=939 name=/usr/sbin/cupsd [ 10.868125] type=1505 audit(1291313299.266:23): operation="profile_replace" pid=940 name=/usr/sbin/mysqld [ 11.236149] NET: Registered protocol family 15 [ 11.304460] alg: No test for cipher_null (cipher_null-generic) [ 11.304671] alg: No test for ecb(cipher_null) (ecb-cipher_null) [ 11.304752] alg: No test for digest_null (digest_null-generic) [ 11.304809] alg: No test for compress_null (compress_null-generic) [ 11.359655] padlock: VIA PadLock Hash Engine not detected. [ 11.440437] padlock: VIA PadLock Hash Engine not detected. [ 11.859058] Intel AES-NI instructions are not detected. [ 11.911057] padlock: VIA PadLock not detected. [ 13.153266] sky2 eth0: enabling interface [ 13.154538] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.180283] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 13.192915] e1000: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 13.194255] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 13.292568] intel_rng: FWH not detected [ 13.881401] Initializing XFRM netlink socket [ 13.886765] padlock: VIA PadLock not detected. [ 13.934856] padlock: VIA PadLock Hash Engine not detected. [ 14.010666] Intel AES-NI instructions are not detected. [ 14.044021] padlock: VIA PadLock not detected. [ 17.522812] __ratelimit: 6 callbacks suppressed [ 17.522817] type=1503 audit(1291313305.922:26): operation="open" pid=1754 parent=1753 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 17.586899] usplash:392 freeing invalid memtype ffffffffdf000000-ffffffffdf7f0000 [ 17.811712] type=1503 audit(1291313293.425:27): operation="open" pid=1781 parent=1780 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 18.081870] type=1503 audit(1291313293.695:28): operation="open" pid=1896 parent=1788 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 18.881033] type=1503 audit(1291313294.491:29): operation="open" pid=1907 parent=1906 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 19.923576] type=1503 audit(1291313295.535:30): operation="open" pid=1932 parent=1931 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 19.991140] type=1503 audit(1291313295.605:31): operation="open" pid=1945 parent=1944 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 23.073981] ppdev: user-space parallel port driver [ 23.078476] 3w-9xxx: scsi2: ERROR: (0x03:0x0101): Invalid command opcode:opcode=0x85. [ 23.078846] 3w-9xxx: scsi2: ERROR: (0x03:0x0101): Invalid command opcode:opcode=0x85. [ 23.157481] CPU0 attaching NULL sched-domain. [ 23.157490] CPU1 attaching NULL sched-domain. [ 23.157494] CPU2 attaching NULL sched-domain. [ 23.157498] CPU3 attaching NULL sched-domain. [ 23.183878] CPU0 attaching sched-domain: [ 23.183885] domain 0: span 0,2 level SIBLING [ 23.183889] groups: 0 2 [ 23.183895] domain 1: span 0-3 level CPU [ 23.183898] groups: 0,2 1,3 [ 23.183905] CPU1 attaching sched-domain: [ 23.183908] domain 0: span 1,3 level SIBLING [ 23.183911] groups: 1 3 [ 23.183916] domain 1: span 0-3 level CPU [ 23.183919] groups: 1,3 0,2 [ 23.183925] CPU2 attaching sched-domain: [ 23.183928] domain 0: span 0,2 level SIBLING [ 23.183931] groups: 2 0 [ 23.183936] domain 1: span 0-3 level CPU [ 23.183939] groups: 0,2 1,3 [ 23.183945] CPU3 attaching sched-domain: [ 23.183947] domain 0: span 1,3 level SIBLING [ 23.183950] groups: 3 1 [ 23.183955] domain 1: span 0-3 level CPU [ 23.183958] groups: 1,3 0,2 [ 23.232510] eth1: no IPv6 routers present [ 25.184175] 3w-9xxx: scsi2: ERROR: (0x03:0x0101): Invalid command opcode:opcode=0x85. [ 25.185352] 3w-9xxx: scsi2: ERROR: (0x03:0x0101): Invalid command opcode:opcode=0x85. [ 25.195016] CPU0 attaching NULL sched-domain. [ 25.195026] CPU1 attaching NULL sched-domain. [ 25.195030] CPU2 attaching NULL sched-domain. [ 25.195033] CPU3 attaching NULL sched-domain. [ 25.233886] CPU0 attaching sched-domain: [ 25.233895] domain 0: span 0,2 level SIBLING [ 25.233899] groups: 0 2 [ 25.233906] domain 1: span 0,2 level MC [ 25.233909] groups: 0,2 (__cpu_power = 2048) [ 25.233915] domain 2: span 0-3 level CPU [ 25.233918] groups: 0,2 (__cpu_power = 2048) 1,3 (__cpu_power = 2048) [ 25.233929] CPU1 attaching sched-domain: [ 25.233932] domain 0: span 1,3 level SIBLING [ 25.233935] groups: 1 3 [ 25.233940] domain 1: span 1,3 level MC [ 25.233943] groups: 1,3 (__cpu_power = 2048) [ 25.233949] domain 2: span 0-3 level CPU [ 25.233952] groups: 1,3 (__cpu_power = 2048) 0,2 (__cpu_power = 2048) [ 25.233960] CPU2 attaching sched-domain: [ 25.233963] domain 0: span 0,2 level SIBLING [ 25.233966] groups: 2 0 [ 25.233971] domain 1: span 0,2 level MC [ 25.233974] groups: 0,2 (__cpu_power = 2048) [ 25.233979] domain 2: span 0-3 level CPU [ 25.233982] groups: 0,2 (__cpu_power = 2048) 1,3 (__cpu_power = 2048) [ 25.233991] CPU3 attaching sched-domain: [ 25.233994] domain 0: span 1,3 level SIBLING [ 25.233997] groups: 3 1 [ 25.234002] domain 1: span 1,3 level MC [ 25.234005] groups: 1,3 (__cpu_power = 2048) [ 25.234010] domain 2: span 0-3 level CPU [ 25.234013] groups: 1,3 (__cpu_power = 2048) 0,2 (__cpu_power = 2048) [50328.270109] usb 1-4.1: new high speed USB device using ehci_hcd and address 4 [50328.385091] usb 1-4.1: configuration #1 chosen from 4 choices [81875.337614] usb 1-4.1: USB disconnect, address 4 [124909.190109] usb 1-4.1: new high speed USB device using ehci_hcd and address 5 [124909.303209] usb 1-4.1: configuration #1 chosen from 4 choices [174639.805751] usb 1-4.1: USB disconnect, address 5 [227438.730136] usb 1-4.1: new high speed USB device using ehci_hcd and address 6 [227438.847117] usb 1-4.1: configuration #1 chosen from 4 choices [259225.354198] usb 1-4.1: USB disconnect, address 6 [293893.190159] usb 1-4.1: new high speed USB device using ehci_hcd and address 7 [293893.305382] usb 1-4.1: configuration #1 chosen from 4 choices [344980.600691] usb 1-4.1: USB disconnect, address 7 [391987.600196] usb 1-4.1: new high speed USB device using ehci_hcd and address 8 [391987.713415] usb 1-4.1: configuration #1 chosen from 4 choices [411094.902366] usb 1-4.1: USB disconnect, address 8 [412550.480158] usb 1-4.6: new high speed USB device using ehci_hcd and address 9 [412550.602261] usb 1-4.6: configuration #1 chosen from 1 choice [412550.657098] Initializing USB Mass Storage driver... [412550.657431] scsi3 : SCSI emulation for USB Mass Storage devices [412550.657559] usb-storage: device found at 9 [412550.657565] usb-storage: waiting for device to settle before scanning [412550.657577] usbcore: registered new interface driver usb-storage [412550.657581] USB Mass Storage support registered. [412555.650253] usb-storage: device scan complete [412555.650710] scsi 3:0:0:0: Direct-Access Memorex TD 2C 1.04 PQ: 0 ANSI: 0 CCS [412555.651303] sd 3:0:0:0: Attached scsi generic sg2 type 0 [412556.660369] sd 3:0:0:0: [sdb] 501760 512-byte logical blocks: (256 MB/245 MiB) [412556.660857] sd 3:0:0:0: [sdb] Write Protect is off [412556.660861] sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00 [412556.660866] sd 3:0:0:0: [sdb] Assuming drive cache: write through [412556.663478] sd 3:0:0:0: [sdb] Assuming drive cache: write through [412556.663485] sdb: sdb1 [412556.668481] sd 3:0:0:0: [sdb] Assuming drive cache: write through [412556.668488] sd 3:0:0:0: [sdb] Attached SCSI removable disk [415763.950098] usb 1-4.6: reset high speed USB device using ehci_hcd and address 9 [415766.015946] usb 1-4.6: USB disconnect, address 9 [440600.781603] process `skype' is using obsolete setsockopt SO_BSDCOMPAT [441370.447588] npviewer.bin[22374]: segfault at 0 ip 00000000f6254ed1 sp 00000000ffc46fe0 error 4 in libflashplayer.so[f5eb5000+b2e000] [442716.910193] usb 1-4.6: new high speed USB device using ehci_hcd and address 10 [442717.043421] usb 1-4.6: configuration #1 chosen from 1 choice [442717.044515] scsi4 : SCSI emulation for USB Mass Storage devices [442717.044659] usb-storage: device found at 10 [442717.044663] usb-storage: waiting for device to settle before scanning [442722.041307] usb-storage: device scan complete [442722.061349] scsi 4:0:0:0: Direct-Access Memorex TD 2C 1.04 PQ: 0 ANSI: 0 CCS [442722.062040] sd 4:0:0:0: Attached scsi generic sg2 type 0 [442723.077407] sd 4:0:0:0: [sdb] 501760 512-byte logical blocks: (256 MB/245 MiB) [442723.077890] sd 4:0:0:0: [sdb] Write Protect is off [442723.077898] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00 [442723.077902] sd 4:0:0:0: [sdb] Assuming drive cache: write through [442723.080727] sd 4:0:0:0: [sdb] Assuming drive cache: write through [442723.080737] sdb: sdb1 [442723.083645] sd 4:0:0:0: [sdb] Assuming drive cache: write through [442723.083654] sd 4:0:0:0: [sdb] Attached SCSI removable disk [442798.170134] usb 1-4.6: reset high speed USB device using ehci_hcd and address 10 [442800.629671] usb 1-4.6: USB disconnect, address 10 [476638.923913] usb 1-4.1: new high speed USB device using ehci_hcd and address 11 [476639.033404] usb 1-4.1: configuration #1 chosen from 4 choices [505596.265136] usb 1-4.1: USB disconnect, address 11 [505644.119606] npviewer.bin[22467]: segfault at 418 ip 00000000f607ac86 sp 00000000ffac23f8 error 6 in libflashplayer.so[f5e2b000+b2e000] [505820.278211] npviewer.bin[25377]: segfault at 418 ip 00000000f6069c86 sp 00000000ff8af9e8 error 6 in libflashplayer.so[f5e1a000+b2e000] [507551.203908] usb 1-4.1: new high speed USB device using ehci_hcd and address 12 [507551.315639] usb 1-4.1: configuration #1 chosen from 4 choices [510155.527940] usb 1-4.1: USB disconnect, address 12 [516419.815853] npviewer.bin[26251]: segfault at 0 ip 00000000f625fed1 sp 00000000ffedc880 error 4 in libflashplayer.so[f5ec0000+b2e000] [518412.760123] usb 1-4.6: new high speed USB device using ehci_hcd and address 13 [518412.882225] usb 1-4.6: configuration #1 chosen from 1 choice [518412.883015] scsi5 : SCSI emulation for USB Mass Storage devices [518412.883237] usb-storage: device found at 13 [518412.883242] usb-storage: waiting for device to settle before scanning [518417.880203] usb-storage: device scan complete [518417.880683] scsi 5:0:0:0: Direct-Access Memorex TD 2C 1.04 PQ: 0 ANSI: 0 CCS [518417.881332] sd 5:0:0:0: Attached scsi generic sg2 type 0 [518418.705240] sd 5:0:0:0: [sdb] 501760 512-byte logical blocks: (256 MB/245 MiB) [518418.705731] sd 5:0:0:0: [sdb] Write Protect is off [518418.705736] sd 5:0:0:0: [sdb] Mode Sense: 23 00 00 00 [518418.705739] sd 5:0:0:0: [sdb] Assuming drive cache: write through [518418.708480] sd 5:0:0:0: [sdb] Assuming drive cache: write through [518418.708486] sdb: sdb1 [518418.711497] sd 5:0:0:0: [sdb] Assuming drive cache: write through [518418.711507] sd 5:0:0:0: [sdb] Attached SCSI removable disk [518991.560154] usb 1-4.6: reset high speed USB device using ehci_hcd and address 13 [518994.554586] usb 1-4.6: USB disconnect, address 13 [568730.500102] usb 1-4.1: new high speed USB device using ehci_hcd and address 14 [568730.613948] usb 1-4.1: configuration #1 chosen from 4 choices [605987.838134] usb 1-4.1: USB disconnect, address 14 [607794.320204] usb 1-4.6: new high speed USB device using ehci_hcd and address 15 [607794.445931] usb 1-4.6: configuration #1 chosen from 1 choice [607794.448510] scsi6 : SCSI emulation for USB Mass Storage devices [607794.448851] usb-storage: device found at 15 [607794.448856] usb-storage: waiting for device to settle before scanning [607799.440282] usb-storage: device scan complete [607799.440761] scsi 6:0:0:0: Direct-Access Memorex TD 2C 1.04 PQ: 0 ANSI: 0 CCS [607799.441347] sd 6:0:0:0: Attached scsi generic sg2 type 0 [607800.444671] sd 6:0:0:0: [sdb] 501760 512-byte logical blocks: (256 MB/245 MiB) [607800.445155] sd 6:0:0:0: [sdb] Write Protect is off [607800.445163] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 [607800.445167] sd 6:0:0:0: [sdb] Assuming drive cache: write through [607800.447778] sd 6:0:0:0: [sdb] Assuming drive cache: write through [607800.447785] sdb: sdb1 [607800.452818] sd 6:0:0:0: [sdb] Assuming drive cache: write through [607800.452828] sd 6:0:0:0: [sdb] Attached SCSI removable disk [608455.890154] usb 1-4.6: reset high speed USB device using ehci_hcd and address 15 [608457.769419] usb 1-4.6: USB disconnect, address 15 [650910.362695] usb 1-4.1: new high speed USB device using ehci_hcd and address 16 [650910.476674] usb 1-4.1: configuration #1 chosen from 4 choices [688218.889384] usb 1-4.1: USB disconnect, address 16 [798984.549123] type=1505 audit(1292112260.165:32): operation="profile_replace" pid=3733 name=/usr/sbin/named [799379.031238] type=1505 audit(1292112654.642:33): operation="profile_replace" pid=4426 name=/usr/sbin/named