[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 (Ubuntu 2.6.32-24.42-generic 2.6.32.15+drm33.5) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfec3c00 (usable) [ 0.000000] BIOS-e820: 00000000dfec3c00 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0xdfec3 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask C00000000 write-back [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000dfec3c00 (usable) [ 0.000000] modified: 00000000dfec3c00 - 00000000e0000000 (reserved) [ 0.000000] modified: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] modified: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 372dc000 - 37fef0a9 [ 0.000000] Allocated new RAMDISK: 008e2000 - 015f50a9 [ 0.000000] Move RAMDISK from 00000000372dc000 - 0000000037fef0a8 to 008e2000 - 015f50a8 [ 0.000000] ACPI: RSDP 000fbe40 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT dfec6600 00054 (v01 DELL QA09 27D9071F ASL 00000061) [ 0.000000] ACPI: FACP dfec649c 000F4 (v04 DELL QA09 27D9071F ASL 00000061) [ 0.000000] ACPI: DSDT dfec6c00 04824 (v02 INT430 SYSFexxx 00001001 INTL 20050624) [ 0.000000] ACPI: FACS dfed5400 00040 [ 0.000000] ACPI: HPET dfec6700 00038 (v01 DELL QA09 00000001 ASL 00000061) [ 0.000000] ACPI: APIC dfec6800 00068 (v01 DELL QA09 27D9071F ASL 00000047) [ 0.000000] ACPI: MCFG dfec67c0 0003E (v16 DELL QA09 27D9071F ASL 00000061) [ 0.000000] ACPI: SLIC dfec689c 00176 (v01 DELL QA09 27D9071F ASL 00000061) [ 0.000000] ACPI: SSDT dfec4b02 0066C (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2694MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008ddeb8] TEXT DATA BSS ==> [0000100000 - 00008ddeb8] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [00008de000 - 00008e1190] BRK ==> [00008de000 - 00008e1190] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008e2000 - 00015f50a9] NEW RAMDISK ==> [00008e2000 - 00015f50a9] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000dfec3 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000dfec3 [ 0.000000] On node 0 totalpages: 917086 [ 0.000000] free_area_init_node: node 0, pgdat c079a780, node_mem_map c15f7000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 5390 pages used for memmap [ 0.000000] HighMem zone: 684471 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c3400000 s36056 r0 d21288 u2097152 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 909920 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=/dev/sda6 loop=/ubuntu/disks/root.disk ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] allocated 18343740 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000dfec3) [ 0.000000] Memory: 3598252k/3668748k available (4679k kernel code, 69060k reserved, 2124k data, 660k init, 2759444k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a5000 - 0xc084a000 ( 660 kB) [ 0.000000] .data : 0xc0591e33 - 0xc07a4e88 (2124 kB) [ 0.000000] .text : 0xc0100000 - 0xc0591e33 (4679 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2194.264 MHz processor. [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.52 BogoMIPS (lpj=8777056) [ 0.004020] Security Framework initialized [ 0.004038] AppArmor: AppArmor initialized [ 0.004044] Mount-cache hash table entries: 512 [ 0.004156] Initializing cgroup subsys ns [ 0.004160] Initializing cgroup subsys cpuacct [ 0.004164] Initializing cgroup subsys memory [ 0.004171] Initializing cgroup subsys devices [ 0.004173] Initializing cgroup subsys freezer [ 0.004175] Initializing cgroup subsys net_cls [ 0.004194] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004196] CPU: L2 cache: 2048K [ 0.004199] CPU: Physical Processor ID: 0 [ 0.004200] CPU: Processor Core ID: 0 [ 0.004204] mce: CPU supports 6 MCE banks [ 0.004212] CPU0: Thermal monitoring enabled (TM2) [ 0.004215] using mwait in idle threads. [ 0.004221] Performance Events: Core2 events, Intel PMU driver. [ 0.004229] ... version: 2 [ 0.004231] ... bit width: 40 [ 0.004232] ... generic registers: 2 [ 0.004234] ... value mask: 000000ffffffffff [ 0.004236] ... max period: 000000007fffffff [ 0.004238] ... fixed-purpose events: 3 [ 0.004239] ... event mask: 0000000700000003 [ 0.004244] Checking 'hlt' instruction... OK. [ 0.022642] ACPI: Core revision 20090903 [ 0.032009] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.032014] ftrace: allocating 21780 entries in 43 pages [ 0.036050] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.036402] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.078727] CPU0: Intel(R) Core(TM)2 Duo CPU T6670 @ 2.20GHz stepping 0a [ 0.080001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 2048K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.008000] CPU1: Thermal monitoring enabled (TM2) [ 0.164081] CPU1: Intel(R) Core(TM)2 Duo CPU T6670 @ 2.20GHz stepping 0a [ 0.164094] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.168016] Brought up 2 CPUs [ 0.168018] Total of 2 processors activated (8777.48 BogoMIPS). [ 0.168494] CPU0 attaching sched-domain: [ 0.168497] domain 0: span 0-1 level MC [ 0.168499] groups: 0 1 [ 0.168504] CPU1 attaching sched-domain: [ 0.168506] domain 0: span 0-1 level MC [ 0.168508] groups: 1 0 [ 0.168594] devtmpfs: initialized [ 0.168594] regulator: core version 0.5 [ 0.168594] Time: 7:56:17 Date: 09/13/10 [ 0.168594] NET: Registered protocol family 16 [ 0.168594] Trying to unpack rootfs image as initramfs... [ 0.168594] EISA bus registered [ 0.168594] ACPI: bus type pci registered [ 0.168594] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 0.168594] PCI: MCFG area at f8000000 reserved in E820 [ 0.168594] PCI: Using MMCONFIG for extended config space [ 0.168594] PCI: Using configuration type 1 for base access [ 0.172090] bio: create slab at 0 [ 0.172822] ACPI: EC: Look up EC in DSDT [ 0.172992] ACPI: BIOS _OSI(Linux) query ignored [ 0.190189] ACPI: SSDT dfed5480 00043 (v01 LMPWR DELLLOM 00001001 INTL 20050624) [ 0.224081] ACPI: Interpreter enabled [ 0.224094] ACPI: (supports S0 S3 S4 S5) [ 0.224114] ACPI: Using IOAPIC for interrupt routing [ 0.313146] ACPI: No dock devices found. [ 0.334963] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.335096] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.335100] pci 0000:00:01.0: PME# disabled [ 0.335204] pci 0000:00:1a.0: reg 20 io port: [0x6f60-0x6f7f] [ 0.335302] pci 0000:00:1a.1: reg 20 io port: [0x6f80-0x6f9f] [ 0.335401] pci 0000:00:1a.2: reg 20 io port: [0x6fa0-0x6fbf] [ 0.335500] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff] [ 0.335571] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.335576] pci 0000:00:1a.7: PME# disabled [ 0.335635] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6ffc000-0xf6ffffff] [ 0.335699] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.335704] pci 0000:00:1b.0: PME# disabled [ 0.336097] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.336102] pci 0000:00:1c.0: PME# disabled [ 0.336202] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.336207] pci 0000:00:1c.1: PME# disabled [ 0.336310] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.336314] pci 0000:00:1c.3: PME# disabled [ 0.336416] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.336421] pci 0000:00:1c.4: PME# disabled [ 0.336524] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.336528] pci 0000:00:1c.5: PME# disabled [ 0.336608] pci 0000:00:1d.0: reg 20 io port: [0x6f00-0x6f1f] [ 0.336706] pci 0000:00:1d.1: reg 20 io port: [0x6f20-0x6f3f] [ 0.336805] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f] [ 0.336905] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff] [ 0.336976] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.336982] pci 0000:00:1d.7: PME# disabled [ 0.337236] pci 0000:00:1f.2: reg 10 io port: [0x6e70-0x6e77] [ 0.337244] pci 0000:00:1f.2: reg 14 io port: [0x6e78-0x6e7b] [ 0.337252] pci 0000:00:1f.2: reg 18 io port: [0x6e80-0x6e87] [ 0.337260] pci 0000:00:1f.2: reg 1c io port: [0x6e88-0x6e8b] [ 0.337268] pci 0000:00:1f.2: reg 20 io port: [0x6ea0-0x6eaf] [ 0.337276] pci 0000:00:1f.2: reg 24 io port: [0x6e90-0x6e9f] [ 0.337347] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf6ffbf00-0xf6ffbfff] [ 0.337368] pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f] [ 0.337426] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xe0000000-0xefffffff] [ 0.337432] pci 0000:01:00.0: reg 14 io port: [0xee00-0xeeff] [ 0.337439] pci 0000:01:00.0: reg 18 32bit mmio: [0xf6df0000-0xf6dfffff] [ 0.337457] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.337479] pci 0000:01:00.0: supports D1 D2 [ 0.337541] pci 0000:00:01.0: bridge io port: [0xe000-0xefff] [ 0.337544] pci 0000:00:01.0: bridge 32bit mmio: [0xf6d00000-0xf6efffff] [ 0.337549] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.337691] pci 0000:0c:00.0: reg 10 64bit mmio: [0xf6cf0000-0xf6cfffff] [ 0.337781] pci 0000:0c:00.0: supports D1 [ 0.337783] pci 0000:0c:00.0: PME# supported from D0 D1 D3hot [ 0.337789] pci 0000:0c:00.0: PME# disabled [ 0.337878] pci 0000:00:1c.1: bridge 32bit mmio: [0xf6c00000-0xf6cfffff] [ 0.337946] pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff] [ 0.337951] pci 0000:00:1c.3: bridge 32bit mmio: [0xf6a00000-0xf6bfffff] [ 0.337959] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf0000000-0xf01fffff] [ 0.338030] pci 0000:0f:00.0: reg 10 32bit mmio: [0xf69ff600-0xf69ff6ff] [ 0.338139] pci 0000:0f:00.0: supports D1 D2 [ 0.338141] pci 0000:0f:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.338147] pci 0000:0f:00.0: PME# disabled [ 0.338234] pci 0000:0f:00.1: reg 10 32bit mmio: [0xf69ff700-0xf69ff7ff] [ 0.338343] pci 0000:0f:00.1: supports D1 D2 [ 0.338345] pci 0000:0f:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.338351] pci 0000:0f:00.1: PME# disabled [ 0.338434] pci 0000:0f:00.3: reg 10 32bit mmio: [0xf69ff800-0xf69fffff] [ 0.338542] pci 0000:0f:00.3: supports D1 D2 [ 0.338544] pci 0000:0f:00.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.338551] pci 0000:0f:00.3: PME# disabled [ 0.338637] pci 0000:00:1c.4: bridge 32bit mmio: [0xf6900000-0xf69fffff] [ 0.338814] pci 0000:09:00.0: reg 10 io port: [0xce00-0xceff] [ 0.338893] pci 0000:09:00.0: reg 18 64bit mmio pref: [0xf0204000-0xf0204fff] [ 0.338946] pci 0000:09:00.0: reg 20 64bit mmio pref: [0xf0200000-0xf0203fff] [ 0.338974] pci 0000:09:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.339135] pci 0000:09:00.0: supports D1 D2 [ 0.339137] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.339152] pci 0000:09:00.0: PME# disabled [ 0.339311] pci 0000:00:1c.5: bridge io port: [0xc000-0xcfff] [ 0.339316] pci 0000:00:1c.5: bridge 32bit mmio: [0xf6800000-0xf68fffff] [ 0.339325] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xf0200000-0xf02fffff] [ 0.339393] pci 0000:00:1e.0: transparent bridge [ 0.339447] pci_bus 0000:00: on NUMA node 0 [ 0.339454] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.339682] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.339793] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.339845] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.339909] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.339975] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.340049] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.340111] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 0.352114] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *4 [ 0.352223] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 0.352313] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. [ 0.352418] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *3 [ 0.352521] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.352626] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.352735] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.352828] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.352947] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.352953] vgaarb: loaded [ 0.353061] SCSI subsystem initialized [ 0.353154] libata version 3.00 loaded. [ 0.353216] usbcore: registered new interface driver usbfs [ 0.353227] usbcore: registered new interface driver hub [ 0.353249] usbcore: registered new device driver usb [ 0.353390] ACPI: WMI: Mapper loaded [ 0.353392] PCI: Using ACPI for IRQ routing [ 0.353605] NetLabel: Initializing [ 0.353606] NetLabel: domain hash size = 128 [ 0.353608] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.353619] NetLabel: unlabeled traffic allowed by default [ 0.353653] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.353658] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.356110] Switching to clocksource tsc [ 0.357920] AppArmor: AppArmor Filesystem Enabled [ 0.357932] pnp: PnP ACPI init [ 0.357943] ACPI: bus type pnp registered [ 0.404437] pnp: PnP ACPI: found 12 devices [ 0.404441] ACPI: ACPI bus type pnp unregistered [ 0.404445] PnPBIOS: Disabled by ACPI PNP [ 0.404463] system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.404469] system 00:09: ioport range 0x900-0x97f has been reserved [ 0.404472] system 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 0.404474] system 00:09: ioport range 0x1000-0x1005 has been reserved [ 0.404477] system 00:09: ioport range 0x1008-0x100f has been reserved [ 0.404483] system 00:0a: ioport range 0xf400-0xf4fe has been reserved [ 0.404485] system 00:0a: ioport range 0x1006-0x1007 has been reserved [ 0.404488] system 00:0a: ioport range 0x100a-0x1059 could not be reserved [ 0.404490] system 00:0a: ioport range 0x1080-0x10bf has been reserved [ 0.404493] system 00:0a: ioport range 0x1100-0x111f has been reserved [ 0.404496] system 00:0a: ioport range 0x1010-0x102f has been reserved [ 0.404498] system 00:0a: ioport range 0x809-0x809 has been reserved [ 0.404504] system 00:0b: iomem range 0x0-0x9efff could not be reserved [ 0.404507] system 00:0b: iomem range 0x9f000-0x9ffff could not be reserved [ 0.404509] system 00:0b: iomem range 0xc0000-0xcffff could not be reserved [ 0.404512] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved [ 0.404515] system 00:0b: iomem range 0x100000-0xdfec3bff could not be reserved [ 0.404517] system 00:0b: iomem range 0xdfec3c00-0xdfefffff has been reserved [ 0.404520] system 00:0b: iomem range 0xdff00000-0xdfffffff has been reserved [ 0.404523] system 00:0b: iomem range 0xffe00000-0xffffffff has been reserved [ 0.404526] system 00:0b: iomem range 0xfec00000-0xfec0ffff could not be reserved [ 0.404529] system 00:0b: iomem range 0xfee00000-0xfee0ffff has been reserved [ 0.404531] system 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.404534] system 00:0b: iomem range 0xfeda0000-0xfeda3fff has been reserved [ 0.404536] system 00:0b: iomem range 0xfeda4000-0xfeda4fff has been reserved [ 0.404539] system 00:0b: iomem range 0xfeda5000-0xfeda5fff has been reserved [ 0.404542] system 00:0b: iomem range 0xfeda6000-0xfeda6fff has been reserved [ 0.404544] system 00:0b: iomem range 0xfed1c800-0xfed1cfff has been reserved [ 0.404547] system 00:0b: iomem range 0xfed18000-0xfed1bfff has been reserved [ 0.404550] system 00:0b: iomem range 0xf8000000-0xfbffffff has been reserved [ 0.439323] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.439327] pci 0000:00:01.0: IO window: 0xe000-0xefff [ 0.439331] pci 0000:00:01.0: MEM window: 0xf6d00000-0xf6efffff [ 0.439335] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.439340] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b [ 0.439343] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 0.439350] pci 0000:00:1c.0: MEM window: 0xf0300000-0xf04fffff [ 0.439355] pci 0000:00:1c.0: PREFETCH window: 0x000000f0500000-0x000000f06fffff [ 0.439363] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c [ 0.439366] pci 0000:00:1c.1: IO window: 0x3000-0x3fff [ 0.439373] pci 0000:00:1c.1: MEM window: 0xf6c00000-0xf6cfffff [ 0.439378] pci 0000:00:1c.1: PREFETCH window: 0x000000f0700000-0x000000f08fffff [ 0.439386] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0d [ 0.439389] pci 0000:00:1c.3: IO window: 0xd000-0xdfff [ 0.439396] pci 0000:00:1c.3: MEM window: 0xf6a00000-0xf6bfffff [ 0.439401] pci 0000:00:1c.3: PREFETCH window: 0x000000f0000000-0x000000f01fffff [ 0.439409] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0f [ 0.439413] pci 0000:00:1c.4: IO window: 0x4000-0x4fff [ 0.439419] pci 0000:00:1c.4: MEM window: 0xf6900000-0xf69fffff [ 0.439424] pci 0000:00:1c.4: PREFETCH window: 0x000000f0900000-0x000000f0afffff [ 0.439433] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09 [ 0.439436] pci 0000:00:1c.5: IO window: 0xc000-0xcfff [ 0.439442] pci 0000:00:1c.5: MEM window: 0xf6800000-0xf68fffff [ 0.439447] pci 0000:00:1c.5: PREFETCH window: 0x000000f0200000-0x000000f02fffff [ 0.439455] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 [ 0.439457] pci 0000:00:1e.0: IO window: disabled [ 0.439463] pci 0000:00:1e.0: MEM window: disabled [ 0.439467] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.439486] alloc irq_desc for 16 on node -1 [ 0.439488] alloc kstat_irqs on node -1 [ 0.439496] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.439501] pci 0000:00:01.0: setting latency timer to 64 [ 0.439511] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.439516] pci 0000:00:1c.0: setting latency timer to 64 [ 0.439527] alloc irq_desc for 17 on node -1 [ 0.439529] alloc kstat_irqs on node -1 [ 0.439545] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.439551] pci 0000:00:1c.1: setting latency timer to 64 [ 0.439561] alloc irq_desc for 19 on node -1 [ 0.439563] alloc kstat_irqs on node -1 [ 0.439566] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.439571] pci 0000:00:1c.3: setting latency timer to 64 [ 0.439582] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.439587] pci 0000:00:1c.4: setting latency timer to 64 [ 0.439597] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.439602] pci 0000:00:1c.5: setting latency timer to 64 [ 0.439611] pci 0000:00:1e.0: setting latency timer to 64 [ 0.439616] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.439618] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.439621] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] [ 0.439623] pci_bus 0000:01: resource 1 mem: [0xf6d00000-0xf6efffff] [ 0.439626] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.439628] pci_bus 0000:0b: resource 0 io: [0x2000-0x2fff] [ 0.439631] pci_bus 0000:0b: resource 1 mem: [0xf0300000-0xf04fffff] [ 0.439633] pci_bus 0000:0b: resource 2 pref mem [0xf0500000-0xf06fffff] [ 0.439635] pci_bus 0000:0c: resource 0 io: [0x3000-0x3fff] [ 0.439637] pci_bus 0000:0c: resource 1 mem: [0xf6c00000-0xf6cfffff] [ 0.439640] pci_bus 0000:0c: resource 2 pref mem [0xf0700000-0xf08fffff] [ 0.439642] pci_bus 0000:0d: resource 0 io: [0xd000-0xdfff] [ 0.439645] pci_bus 0000:0d: resource 1 mem: [0xf6a00000-0xf6bfffff] [ 0.439647] pci_bus 0000:0d: resource 2 pref mem [0xf0000000-0xf01fffff] [ 0.439649] pci_bus 0000:0f: resource 0 io: [0x4000-0x4fff] [ 0.439652] pci_bus 0000:0f: resource 1 mem: [0xf6900000-0xf69fffff] [ 0.439654] pci_bus 0000:0f: resource 2 pref mem [0xf0900000-0xf0afffff] [ 0.439657] pci_bus 0000:09: resource 0 io: [0xc000-0xcfff] [ 0.439659] pci_bus 0000:09: resource 1 mem: [0xf6800000-0xf68fffff] [ 0.439661] pci_bus 0000:09: resource 2 pref mem [0xf0200000-0xf02fffff] [ 0.439664] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.439666] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff] [ 0.439704] NET: Registered protocol family 2 [ 0.439797] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.440105] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.440552] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.440751] TCP: Hash tables configured (established 131072 bind 65536) [ 0.440754] TCP reno registered [ 0.440835] NET: Registered protocol family 1 [ 0.441009] pci 0000:01:00.0: Boot video device [ 0.441187] cpufreq-nforce2: No nForce2 chipset. [ 0.441211] Scanning for low memory corruption every 60 seconds [ 0.441324] audit: initializing netlink socket (disabled) [ 0.441334] type=2000 audit(1284364577.439:1): initialized [ 0.450510] highmem bounce pool size: 64 pages [ 0.450515] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.451926] VFS: Disk quotas dquot_6.5.2 [ 0.451983] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.452512] fuse init (API version 7.13) [ 0.452590] msgmni has been set to 1640 [ 0.452781] alg: No test for stdrng (krng) [ 0.452832] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.452835] io scheduler noop registered [ 0.452836] io scheduler anticipatory registered [ 0.452838] io scheduler deadline registered [ 0.452873] io scheduler cfq registered (default) [ 0.453017] alloc irq_desc for 24 on node -1 [ 0.453019] alloc kstat_irqs on node -1 [ 0.453027] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.453034] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.453166] alloc irq_desc for 25 on node -1 [ 0.453168] alloc kstat_irqs on node -1 [ 0.453177] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.453187] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.453339] alloc irq_desc for 26 on node -1 [ 0.453341] alloc kstat_irqs on node -1 [ 0.453349] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X [ 0.453360] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.453511] alloc irq_desc for 27 on node -1 [ 0.453512] alloc kstat_irqs on node -1 [ 0.453521] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X [ 0.453532] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.453684] alloc irq_desc for 28 on node -1 [ 0.453686] alloc kstat_irqs on node -1 [ 0.453694] pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X [ 0.453705] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.453860] alloc irq_desc for 29 on node -1 [ 0.453862] alloc kstat_irqs on node -1 [ 0.453871] pcieport 0000:00:1c.5: irq 29 for MSI/MSI-X [ 0.453882] pcieport 0000:00:1c.5: setting latency timer to 64 [ 0.453988] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.454131] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.454239] ACPI: AC Adapter [AC] (on-line) [ 0.454308] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.455387] ACPI: Lid Switch [LID] [ 0.455430] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.455436] ACPI: Power Button [PBTN] [ 0.455474] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.455476] ACPI: Sleep Button [SBTN] [ 0.456155] ACPI: SSDT dfec516e 00281 (v01 PmRef BspIst 00003000 INTL 20050624) [ 0.456572] ACPI: SSDT dfec55c6 005E5 (v01 PmRef BspCst 00003001 INTL 20050624) [ 0.456861] Monitor-Mwait will be used to enter C-1 state [ 0.456884] Monitor-Mwait will be used to enter C-2 state [ 0.456903] Monitor-Mwait will be used to enter C-3 state [ 0.456909] Marking TSC unstable due to TSC halts in idle [ 0.456962] processor LNXCPU:00: registered as cooling_device0 [ 0.457356] ACPI: SSDT dfec53ef 001D7 (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.457637] ACPI: SSDT dfec5bab 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.457856] Switching to clocksource hpet [ 0.465117] processor LNXCPU:01: registered as cooling_device1 [ 0.473917] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.473924] ACPI: Thermal Zone [THM] (35 C) [ 0.475281] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.476551] brd: module loaded [ 0.476985] loop: module loaded [ 0.477064] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.477151] ata_piix 0000:00:1f.2: version 2.13 [ 0.477168] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.477174] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] [ 0.477220] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.477294] scsi0 : ata_piix [ 0.477360] scsi1 : ata_piix [ 0.477509] ata1: SATA max UDMA/133 cmd 0x6e70 ctl 0x6e78 bmdma 0x6ea0 irq 17 [ 0.477514] ata2: SATA max UDMA/133 cmd 0x6e80 ctl 0x6e88 bmdma 0x6ea8 irq 17 [ 0.477820] Fixed MDIO Bus: probed [ 0.477850] PPP generic driver version 2.4.2 [ 0.477885] tun: Universal TUN/TAP device driver, 1.6 [ 0.477886] tun: (C) 1999-2004 Max Krasnyansky [ 0.477957] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.477976] alloc irq_desc for 22 on node -1 [ 0.477978] alloc kstat_irqs on node -1 [ 0.477983] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.477995] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.477998] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.478026] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.478056] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.481958] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.481976] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 [ 0.486214] isapnp: Scanning for PnP cards... [ 0.501209] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.501734] usb usb1: configuration #1 chosen from 1 choice [ 0.501766] hub 1-0:1.0: USB hub found [ 0.501773] hub 1-0:1.0: 6 ports detected [ 0.502259] alloc irq_desc for 20 on node -1 [ 0.502261] alloc kstat_irqs on node -1 [ 0.502266] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.502279] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.502283] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.502314] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.502754] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.506773] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.506789] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 [ 0.549505] ACPI: Battery Slot [BAT0] (battery present) [ 0.578339] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.578412] usb usb2: configuration #1 chosen from 1 choice [ 0.578437] hub 2-0:1.0: USB hub found [ 0.578444] hub 2-0:1.0: 6 ports detected [ 0.578503] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.578520] uhci_hcd: USB Universal Host Controller Interface driver [ 0.578552] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.578559] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.578562] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.578595] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.578623] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60 [ 0.578704] usb usb3: configuration #1 chosen from 1 choice [ 0.578727] hub 3-0:1.0: USB hub found [ 0.578733] hub 3-0:1.0: 2 ports detected [ 0.578774] alloc irq_desc for 21 on node -1 [ 0.578776] alloc kstat_irqs on node -1 [ 0.578781] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.578787] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.578790] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.578817] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.578850] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80 [ 0.578934] usb usb4: configuration #1 chosen from 1 choice [ 0.578959] hub 4-0:1.0: USB hub found [ 0.578965] hub 4-0:1.0: 2 ports detected [ 0.579009] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.579015] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.579018] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.579048] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.579074] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0 [ 0.579150] usb usb5: configuration #1 chosen from 1 choice [ 0.579173] hub 5-0:1.0: USB hub found [ 0.579178] hub 5-0:1.0: 2 ports detected [ 0.579222] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.579228] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.579231] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.579264] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.579290] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00 [ 0.579369] usb usb6: configuration #1 chosen from 1 choice [ 0.579391] hub 6-0:1.0: USB hub found [ 0.579397] hub 6-0:1.0: 2 ports detected [ 0.579441] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.579447] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.579450] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.579478] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.579504] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20 [ 0.579583] usb usb7: configuration #1 chosen from 1 choice [ 0.579605] hub 7-0:1.0: USB hub found [ 0.579611] hub 7-0:1.0: 2 ports detected [ 0.579652] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.579658] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.579661] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.579687] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.579713] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 [ 0.579791] usb usb8: configuration #1 chosen from 1 choice [ 0.579813] hub 8-0:1.0: USB hub found [ 0.579819] hub 8-0:1.0: 2 ports detected [ 0.579907] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.593077] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.593086] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.593207] mice: PS/2 mouse device common for all mice [ 0.593335] rtc_cmos 00:03: RTC can wake from S4 [ 0.593372] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.593408] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.593504] device-mapper: uevent: version 1.0.3 [ 0.593619] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.653802] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.713958] Freeing initrd memory: 13388k freed [ 0.720610] device-mapper: multipath: version 1.1.0 loaded [ 0.720615] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.720811] EISA: Probing bus 0 at eisa.0 [ 0.720819] Cannot allocate resource for EISA slot 1 [ 0.720821] Cannot allocate resource for EISA slot 2 [ 0.720823] Cannot allocate resource for EISA slot 3 [ 0.720825] Cannot allocate resource for EISA slot 4 [ 0.720843] EISA: Detected 0 cards. [ 0.720984] cpuidle: using governor ladder [ 0.721089] cpuidle: using governor menu [ 0.721504] TCP cubic registered [ 0.721646] NET: Registered protocol family 10 [ 0.722075] lo: Disabled Privacy Extensions [ 0.722385] NET: Registered protocol family 17 [ 0.723118] Using IPI No-Shortcut mode [ 0.723203] PM: Resume from disk failed. [ 0.723215] registered taskstats version 1 [ 0.723967] Magic number: 10:625:925 [ 0.724109] rtc_cmos 00:03: setting system clock to 2010-09-13 07:56:18 UTC (1284364578) [ 0.724112] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.724114] EDD information not available. [ 0.898765] isapnp: No Plug & Play device found [ 0.980129] usb 2-5: new high speed USB device using ehci_hcd and address 3 [ 0.984098] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.988112] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.016321] ata2.00: ATAPI: Optiarc DVD+/-RW AD-7580S, FD06, max UDMA/100 [ 1.036077] ata1.00: ATA-8: ST9320325AS, 0003DEM1, max UDMA/133 [ 1.036082] ata1.00: 625142448 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 1.048410] ata2.00: configured for UDMA/100 [ 1.052888] ata1.00: configured for UDMA/133 [ 1.053065] scsi 0:0:0:0: Direct-Access ATA ST9320325AS 0003 PQ: 0 ANSI: 5 [ 1.053261] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.053270] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.053313] sd 0:0:0:0: [sda] Write Protect is off [ 1.053316] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.053338] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.053460] sda: [ 1.058372] scsi 1:0:0:0: CD-ROM Optiarc DVD+-RW AD-7580S FD06 PQ: 0 ANSI: 5 [ 1.070874] sda1 sda2 sda3 [ 1.124555] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.124594] Freeing unused kernel memory: 660k freed [ 1.124980] Write protecting the kernel text: 4680k [ 1.125042] Write protecting the kernel read-only data: 1844k [ 1.141114] udev: starting version 151 [ 1.191939] usb 2-5: configuration #1 chosen from 1 choice [ 1.237417] vga16fb: initializing [ 1.237421] vga16fb: mapped to 0xc00a0000 [ 1.237468] fb0: VGA16 VGA frame buffer device [ 1.246921] Linux agpgart interface v0.103 [ 1.275358] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.275400] r8169 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.275510] r8169 0000:09:00.0: setting latency timer to 64 [ 1.275658] alloc irq_desc for 30 on node -1 [ 1.275660] alloc kstat_irqs on node -1 [ 1.275710] r8169 0000:09:00.0: irq 30 for MSI/MSI-X [ 1.280464] eth0: RTL8168d/8111d at 0xf80cc000, 00:26:b9:0c:e1:44, XID 081000c0 IRQ 30 [ 1.289597] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:33/LNXVIDEO:00/input/input5 [ 1.289672] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 1.293276] ohci1394 0000:0f:00.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.293286] ohci1394 0000:0f:00.3: setting latency timer to 64 [ 1.349371] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[f69ff800-f69fffff] Max Packet=[2048] IR/IT contexts=[4/4] [ 1.435122] Console: switching to colour frame buffer device 80x30 [ 1.460065] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 1.637795] usb 3-1: configuration #1 chosen from 1 choice [ 1.640193] hub 3-1:1.0: USB hub found [ 1.641739] hub 3-1:1.0: 3 ports detected [ 1.884049] usb 7-1: new low speed USB device using uhci_hcd and address 2 [ 2.044970] xor: automatically using best checksumming function: pIII_sse [ 2.054626] usb 7-1: configuration #1 chosen from 1 choice [ 2.064010] pIII_sse : 8385.000 MB/sec [ 2.064012] xor: using function: pIII_sse (8385.000 MB/sec) [ 2.066653] device-mapper: dm-raid45: initialized v0.2594b [ 2.080592] usbcore: registered new interface driver hiddev [ 2.093767] input: USB+PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input6 [ 2.093858] generic-usb 0003:04F3:0230.0001: input,hidraw0: USB HID v1.11 Mouse [USB+PS/2 Optical Mouse] on usb-0000:00:1d.1-1/input0 [ 2.093880] usbcore: registered new interface driver usbhid [ 2.093882] usbhid: v2.6:USB HID core driver [ 2.130666] usb 3-1.1: new full speed USB device using uhci_hcd and address 3 [ 2.259821] usb 3-1.1: configuration #1 chosen from 1 choice [ 2.337696] usb 3-1.2: new full speed USB device using uhci_hcd and address 4 [ 2.468839] usb 3-1.2: configuration #1 chosen from 1 choice [ 2.476088] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input7 [ 2.476160] generic-usb 0003:0A5C:4502.0002: input,hidraw1: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-1.2/input0 [ 2.549716] usb 3-1.3: new full speed USB device using uhci_hcd and address 5 [ 2.624558] ieee1394: Host added: ID:BUS[0-00:1023] GUID[324fc0002982f221] [ 2.683825] usb 3-1.3: configuration #1 chosen from 1 choice [ 2.692073] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input8 [ 2.692159] generic-usb 0003:0A5C:4503.0003: input,hidraw2: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-1.3/input0 [ 2.791425] EXT4-fs (loop0): mounted filesystem with ordered data mode [ 25.005285] udev: starting version 151 [ 25.252069] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 25.252072] Disabling lock debugging due to kernel taint [ 25.378035] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 25.380822] [fglrx] Maximum main memory to use for locked dma buffers: 3373 MBytes. [ 25.381181] [fglrx] vendor: 1002 device: 9552 count: 1 [ 25.381684] [fglrx] ioport: bar 1, base 0xee00, size: 0x100 [ 25.381700] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 25.381705] pci 0000:01:00.0: setting latency timer to 64 [ 25.381880] [fglrx] Kernel PAT support is enabled [ 25.381903] [fglrx] module loaded - fglrx 8.72.11 [Apr 8 2010] with 1 minors [ 25.385481] Bluetooth: Core ver 2.15 [ 25.388410] NET: Registered protocol family 31 [ 25.388412] Bluetooth: HCI device and connection manager initialized [ 25.388415] Bluetooth: HCI socket layer initialized [ 25.390627] lp: driver loaded but no devices found [ 25.451588] sdhci: Secure Digital Host Controller Interface driver [ 25.451591] sdhci: Copyright(c) Pierre Ossman [ 25.452894] sdhci-pci 0000:0f:00.0: SDHCI controller found [1180:e822] (rev 1) [ 25.452919] sdhci-pci 0000:0f:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 25.452961] sdhci-pci 0000:0f:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [ 25.452968] sdhci-pci 0000:0f:00.0: setting latency timer to 64 [ 25.453081] Registered led device: mmc0:: [ 25.454155] mmc0: SDHCI controller on PCI [0000:0f:00.0] using DMA [ 25.567864] type=1505 audit(1284335803.339:2): operation="profile_load" pid=772 name="/sbin/dhclient3" [ 25.568532] type=1505 audit(1284335803.343:3): operation="profile_load" pid=772 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 25.568869] type=1505 audit(1284335803.343:4): operation="profile_load" pid=772 name="/usr/lib/connman/scripts/dhclient-script" [ 25.580441] cfg80211: Calling CRDA to update world regulatory domain [ 25.581920] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 25.582028] usbcore: registered new interface driver btusb [ 25.587945] Linux video capture interface: v2.00 [ 25.631525] uvcvideo: Found UVC 1.00 device Integrated_Webcam_2M (064e:8100) [ 25.641012] input: Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input9 [ 25.641071] usbcore: registered new interface driver uvcvideo [ 25.641074] USB Video Class driver (v0.1.0) [ 25.642468] ath9k 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 25.642481] ath9k 0000:0c:00.0: setting latency timer to 64 [ 25.692332] ath: EEPROM regdomain: 0x65 [ 25.692335] ath: EEPROM indicates we should expect a direct regpair map [ 25.692338] ath: Country alpha2 being used: 00 [ 25.692339] ath: Regpair used: 0x65 [ 25.698977] cfg80211: World regulatory domain updated: [ 25.698980] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 25.698983] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 25.698985] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 25.698987] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 25.698990] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 25.698992] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 25.721012] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 25.721054] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 25.722398] phy0: Selected rate control algorithm 'ath9k_rate_control' [ 25.723083] Registered led device: ath9k-phy0::radio [ 25.723099] Registered led device: ath9k-phy0::assoc [ 25.723113] Registered led device: ath9k-phy0::tx [ 25.723128] Registered led device: ath9k-phy0::rx [ 25.723137] phy0: Atheros AR9285 MAC/BB Rev:2 AR5133 RF Rev:e0: mem=0xf8420000, irq=17 [ 25.747803] input: Dell WMI hotkeys as /devices/virtual/input/input10 [ 25.934505] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input11 [ 25.952326] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input12 [ 27.257558] Adding 261112k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:261112k [ 27.566875] type=1505 audit(1284335805.339:5): operation="profile_load" pid=1083 name="/usr/share/gdm/guest-session/Xsession" [ 27.570545] type=1505 audit(1284335805.343:6): operation="profile_replace" pid=1084 name="/sbin/dhclient3" [ 27.571174] type=1505 audit(1284335805.343:7): operation="profile_replace" pid=1084 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 27.571529] type=1505 audit(1284335805.343:8): operation="profile_replace" pid=1084 name="/usr/lib/connman/scripts/dhclient-script" [ 27.574927] type=1505 audit(1284335805.347:9): operation="profile_load" pid=1085 name="/usr/bin/evince" [ 27.582989] type=1505 audit(1284335805.355:10): operation="profile_load" pid=1085 name="/usr/bin/evince-previewer" [ 27.588462] type=1505 audit(1284335805.363:11): operation="profile_load" pid=1085 name="/usr/bin/evince-thumbnailer" [ 27.590518] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 27.601720] r8169: eth0: link down [ 27.601901] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 28.093317] alloc irq_desc for 31 on node -1 [ 28.093320] alloc kstat_irqs on node -1 [ 28.093331] fglrx_pci 0000:01:00.0: irq 31 for MSI/MSI-X [ 28.094040] [fglrx] Firegl kernel thread PID: 1231 [ 28.095765] [fglrx] IRQ 31 Enabled [ 28.144798] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 28.144802] vboxdrv: Successfully done. [ 28.144803] vboxdrv: Found 2 processor cores. [ 28.145474] vboxdrv: fAsync=0 offMin=0x1a2 offMax=0xd10 [ 28.146125] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 28.146127] vboxdrv: Successfully loaded version 3.2.8 (interface 0x00140001). [ 28.413808] Bluetooth: L2CAP ver 2.14 [ 28.413811] Bluetooth: L2CAP socket layer initialized [ 28.419004] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 28.419007] Bluetooth: BNEP filters: protocol multicast [ 28.426595] Bridge firewalling registered [ 28.435400] Bluetooth: SCO (Voice Link) ver 0.6 [ 28.435403] Bluetooth: SCO socket layer initialized [ 28.554009] [fglrx] Gart USWC size:1101 M. [ 28.554012] [fglrx] Gart cacheable size:437 M. [ 28.554017] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 28.554020] [fglrx] Reserved FB block: Unshared offset:fc8d000, size:373000 [ 28.554022] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 [ 28.554972] Bluetooth: RFCOMM TTY layer initialized [ 28.554976] Bluetooth: RFCOMM socket layer initialized [ 28.554978] Bluetooth: RFCOMM ver 1.11 [ 30.520877] ppdev: user-space parallel port driver [ 52.568268] usb 6-2: new full speed USB device using uhci_hcd and address 2 [ 52.688272] usb 6-2: device descriptor read/64, error -71 [ 52.912274] usb 6-2: device descriptor read/64, error -71 [ 53.128272] usb 6-2: new full speed USB device using uhci_hcd and address 3 [ 53.248271] usb 6-2: device descriptor read/64, error -71 [ 53.472301] usb 6-2: device descriptor read/64, error -71 [ 53.688227] usb 6-2: new full speed USB device using uhci_hcd and address 4 [ 54.096218] usb 6-2: device not accepting address 4, error -71 [ 54.208224] usb 6-2: new full speed USB device using uhci_hcd and address 5 [ 54.620287] usb 6-2: device not accepting address 5, error -71 [ 54.620309] hub 6-0:1.0: unable to enumerate USB device on port 2 [ 57.412294] usb 6-2: new full speed USB device using uhci_hcd and address 6 [ 57.568741] usb 6-2: configuration #1 chosen from 1 choice [ 57.596768] usbcore: registered new interface driver usbserial [ 57.596930] USB Serial support registered for generic [ 57.597071] usbcore: registered new interface driver usbserial_generic [ 57.597074] usbserial: USB Serial Driver core [ 57.613966] USB Serial support registered for GSM modem (1-port) [ 57.614044] option 6-2:1.0: GSM modem (1-port) converter detected [ 57.614135] usb 6-2: GSM modem (1-port) converter now attached to ttyUSB0 [ 57.614155] option 6-2:1.1: GSM modem (1-port) converter detected [ 57.614202] usb 6-2: GSM modem (1-port) converter now attached to ttyUSB1 [ 57.614220] option 6-2:1.2: GSM modem (1-port) converter detected [ 57.614267] usb 6-2: GSM modem (1-port) converter now attached to ttyUSB2 [ 57.614285] option 6-2:1.3: GSM modem (1-port) converter detected [ 57.614330] usb 6-2: GSM modem (1-port) converter now attached to ttyUSB3 [ 57.614344] usbcore: registered new interface driver option [ 57.614345] option: v0.7.2:USB Driver for GSM modems [ 142.216952] PPP BSD Compression module registered [ 142.257778] PPP Deflate Compression module registered [ 4277.332973] __ratelimit: 21 callbacks suppressed [ 4277.332976] type=1505 audit(1284340054.573:19): operation="profile_replace" pid=3521 name="/usr/sbin/named"